1git-send-email(1) 2================= 3 4NAME 5---- 6git-send-email - Send a collection of patches as emails 7 8 9SYNOPSIS 10-------- 11'git send-email' [options] <file|directory|rev-list options>... 12 13 14DESCRIPTION 15----------- 16Takes the patches given on the command line and emails them out. 17 18The header of the email is configurable by command line options. If not 19specified on the command line, the user will be prompted with a ReadLine 20enabled interface to provide the necessary information. 21 22There are two formats accepted for patch files: 23 241. mbox format files 25+ 26This is what linkgit:git-format-patch[1] generates. Most headers and MIME 27formatting are ignored. 28 292. The original format used by Greg Kroah-Hartman's 'send_lots_of_email.pl' 30script 31+ 32This format expects the first line of the file to contain the "Cc:" value 33and the "Subject:" of the message as the second line. 34 35 36OPTIONS 37------- 38 39Composing 40~~~~~~~~~ 41 42--bcc:: 43 Specify a "Bcc:" value for each email. Default is the value of 44 'sendemail.bcc'. 45+ 46The --bcc option must be repeated for each user you want on the bcc list. 47 48--cc:: 49 Specify a starting "Cc:" value for each email. 50 Default is the value of 'sendemail.cc'. 51+ 52The --cc option must be repeated for each user you want on the cc list. 53 54--annotate:: 55 Review each patch you're about to send in an editor. The setting 56 'sendemail.multiedit' defines if this will spawn one editor per patch 57 or one for all of them at once. 58 59--compose:: 60 Use $GIT_EDITOR, core.editor, $VISUAL, or $EDITOR to edit an 61 introductory message for the patch series. 62+ 63When '--compose' is used, git send-email gets less interactive will use the 64values of the headers you set there. If the body of the email (what you type 65after the headers and a blank line) only contains blank (or GIT: prefixed) 66lines, the summary won't be sent, but git-send-email will still use the 67Headers values if you don't removed them. 68+ 69If it wasn't able to see a header in the summary it will ask you about it 70interactively after quitting your editor. 71 72--from:: 73 Specify the sender of the emails. This will default to 74 the value GIT_COMMITTER_IDENT, as returned by "git var -l". 75 The user will still be prompted to confirm this entry. 76 77--in-reply-to:: 78 Specify the contents of the first In-Reply-To header. 79 Subsequent emails will refer to the previous email 80 instead of this if --chain-reply-to is set (the default) 81 Only necessary if --compose is also set. If --compose 82 is not set, this will be prompted for. 83 84--subject:: 85 Specify the initial subject of the email thread. 86 Only necessary if --compose is also set. If --compose 87 is not set, this will be prompted for. 88 89--to:: 90 Specify the primary recipient of the emails generated. Generally, this 91 will be the upstream maintainer of the project involved. Default is the 92 value of the 'sendemail.to' configuration value; if that is unspecified, 93 this will be prompted for. 94+ 95The --to option must be repeated for each user you want on the to list. 96 97 98Sending 99~~~~~~~ 100 101--envelope-sender:: 102 Specify the envelope sender used to send the emails. 103 This is useful if your default address is not the address that is 104 subscribed to a list. If you use the sendmail binary, you must have 105 suitable privileges for the -f parameter. Default is the value of 106 the 'sendemail.envelopesender' configuration variable; if that is 107 unspecified, choosing the envelope sender is left to your MTA. 108 109--smtp-encryption:: 110 Specify the encryption to use, either 'ssl' or 'tls'. Any other 111 value reverts to plain SMTP. Default is the value of 112 'sendemail.smtpencryption'. 113 114--smtp-pass:: 115 Password for SMTP-AUTH. The argument is optional: If no 116 argument is specified, then the empty string is used as 117 the password. Default is the value of 'sendemail.smtppass', 118 however '--smtp-pass' always overrides this value. 119+ 120Furthermore, passwords need not be specified in configuration files 121or on the command line. If a username has been specified (with 122'--smtp-user' or a 'sendemail.smtpuser'), but no password has been 123specified (with '--smtp-pass' or 'sendemail.smtppass'), then the 124user is prompted for a password while the input is masked for privacy. 125 126--smtp-server:: 127 If set, specifies the outgoing SMTP server to use (e.g. 128 `smtp.example.com` or a raw IP address). Alternatively it can 129 specify a full pathname of a sendmail-like program instead; 130 the program must support the `-i` option. Default value can 131 be specified by the 'sendemail.smtpserver' configuration 132 option; the built-in default is `/usr/sbin/sendmail` or 133 `/usr/lib/sendmail` if such program is available, or 134 `localhost` otherwise. 135 136--smtp-server-port:: 137 Specifies a port different from the default port (SMTP 138 servers typically listen to smtp port 25 and ssmtp port 139 465). This can be set with 'sendemail.smtpserverport'. 140 141--smtp-ssl:: 142 Legacy alias for '--smtp-encryption ssl'. 143 144--smtp-user:: 145 Username for SMTP-AUTH. Default is the value of 'sendemail.smtpuser'; 146 if a username is not specified (with '--smtp-user' or 'sendemail.smtpuser'), 147 then authentication is not attempted. 148 149 150Automating 151~~~~~~~~~~ 152 153--cc-cmd:: 154 Specify a command to execute once per patch file which 155 should generate patch file specific "Cc:" entries. 156 Output of this command must be single email address per line. 157 Default is the value of 'sendemail.cccmd' configuration value. 158 159--[no-]chain-reply-to:: 160 If this is set, each email will be sent as a reply to the previous 161 email sent. If disabled with "--no-chain-reply-to", all emails after 162 the first will be sent as replies to the first email sent. When using 163 this, it is recommended that the first file given be an overview of the 164 entire patch series. Default is the value of the 'sendemail.chainreplyto' 165 configuration value; if that is unspecified, default to --chain-reply-to. 166 167--identity:: 168 A configuration identity. When given, causes values in the 169 'sendemail.<identity>' subsection to take precedence over 170 values in the 'sendemail' section. The default identity is 171 the value of 'sendemail.identity'. 172 173--[no-]signed-off-by-cc:: 174 If this is set, add emails found in Signed-off-by: or Cc: lines to the 175 cc list. Default is the value of 'sendemail.signedoffbycc' configuration 176 value; if that is unspecified, default to --signed-off-by-cc. 177 178--suppress-cc:: 179 Specify an additional category of recipients to suppress the 180 auto-cc of. 'self' will avoid including the sender, 'author' will 181 avoid including the patch author, 'cc' will avoid including anyone 182 mentioned in Cc lines in the patch, 'sob' will avoid including 183 anyone mentioned in Signed-off-by lines, and 'cccmd' will avoid 184 running the --cc-cmd. 'all' will suppress all auto cc values. 185 Default is the value of 'sendemail.suppresscc' configuration value; 186 if that is unspecified, default to 'self' if --suppress-from is 187 specified, as well as 'sob' if --no-signed-off-cc is specified. 188 189--[no-]suppress-from:: 190 If this is set, do not add the From: address to the cc: list. 191 Default is the value of 'sendemail.suppressfrom' configuration 192 value; if that is unspecified, default to --no-suppress-from. 193 194--[no-]thread:: 195 If this is set, the In-Reply-To header will be set on each email sent. 196 If disabled with "--no-thread", no emails will have the In-Reply-To 197 header set. Default is the value of the 'sendemail.thread' configuration 198 value; if that is unspecified, default to --thread. 199 200 201Administering 202~~~~~~~~~~~~~ 203 204--dry-run:: 205 Do everything except actually send the emails. 206 207--quiet:: 208 Make git-send-email less verbose. One line per email should be 209 all that is output. 210 211--[no-]validate:: 212 Perform sanity checks on patches. 213 Currently, validation means the following: 214+ 215-- 216 * Warn of patches that contain lines longer than 998 characters; this 217 is due to SMTP limits as described by http://www.ietf.org/rfc/rfc2821.txt. 218-- 219+ 220Default is the value of 'sendemail.validate'; if this is not set, 221default to '--validate'. 222 223--[no-]format-patch:: 224 When an argument may be understood either as a reference or as a file name, 225 choose to understand it as a format-patch argument ('--format-patch') 226 or as a file name ('--no-format-patch'). By default, when such a conflict 227 occurs, git send-email will fail. 228 229 230CONFIGURATION 231------------- 232 233sendemail.aliasesfile:: 234 To avoid typing long email addresses, point this to one or more 235 email aliases files. You must also supply 'sendemail.aliasfiletype'. 236 237sendemail.aliasfiletype:: 238 Format of the file(s) specified in sendemail.aliasesfile. Must be 239 one of 'mutt', 'mailrc', 'pine', or 'gnus'. 240 241sendemail.multiedit:: 242 If true (default), a single editor instance will be spawned to edit 243 files you have to edit (patches when '--annotate' is used, and the 244 summary when '--compose' is used). If false, files will be edited one 245 after the other, spawning a new editor each time. 246 247 248Author 249------ 250Written by Ryan Anderson <ryan@michonline.com> 251 252git-send-email is originally based upon 253send_lots_of_email.pl by Greg Kroah-Hartman. 254 255 256Documentation 257-------------- 258Documentation by Ryan Anderson 259 260 261GIT 262--- 263Part of the linkgit:git[1] suite