Andrew's git / gitweb.git / git-bisect.sh
?
git-bisect.shon commit archive: declare struct archiver where it's needed (f15f736)
   1#!/bin/sh
   2
   3USAGE='[help|start|bad|good|skip|next|reset|visualize|replay|log|run]'
   4LONG_USAGE='git bisect help
   5        print this long help message.
   6git bisect start [<bad> [<good>...]] [--] [<pathspec>...]
   7        reset bisect state and start bisection.
   8git bisect bad [<rev>]
   9        mark <rev> a known-bad revision.
  10git bisect good [<rev>...]
  11        mark <rev>... known-good revisions.
  12git bisect skip [<rev>...]
  13        mark <rev>... untestable revisions.
  14git bisect next
  15        find next bisection to test and check it out.
  16git bisect reset [<branch>]
  17        finish bisection search and go back to branch.
  18git bisect visualize
  19        show bisect status in gitk.
  20git bisect replay <logfile>
  21        replay bisection log.
  22git bisect log
  23        show bisect log.
  24git bisect run <cmd>...
  25        use <cmd>... to automatically bisect.
  26
  27Please use "git help bisect" to get the full man page.'
  28
  29OPTIONS_SPEC=
  30. git-sh-setup
  31require_work_tree
  32
  33_x40='[0-9a-f][0-9a-f][0-9a-f][0-9a-f][0-9a-f]'
  34_x40="$_x40$_x40$_x40$_x40$_x40$_x40$_x40$_x40"
  35
  36sq() {
  37        @@PERL@@ -e '
  38                for (@ARGV) {
  39                        s/'\''/'\'\\\\\'\''/g;
  40                        print " '\''$_'\''";
  41                }
  42                print "\n";
  43        ' "$@"
  44}
  45
  46bisect_autostart() {
  47        test -s "$GIT_DIR/BISECT_START" || {
  48                echo >&2 'You need to start by "git bisect start"'
  49                if test -t 0
  50                then
  51                        echo >&2 -n 'Do you want me to do it for you [Y/n]? '
  52                        read yesno
  53                        case "$yesno" in
  54                        [Nn]*)
  55                                exit ;;
  56                        esac
  57                        bisect_start
  58                else
  59                        exit 1
  60                fi
  61        }
  62}
  63
  64bisect_start() {
  65        #
  66        # Verify HEAD.
  67        #
  68        head=$(GIT_DIR="$GIT_DIR" git symbolic-ref -q HEAD) ||
  69        head=$(GIT_DIR="$GIT_DIR" git rev-parse --verify HEAD) ||
  70        die "Bad HEAD - I need a HEAD"
  71
  72        #
  73        # Check if we are bisecting.
  74        #
  75        start_head=''
  76        if test -s "$GIT_DIR/BISECT_START"
  77        then
  78                # Reset to the rev from where we started.
  79                start_head=$(cat "$GIT_DIR/BISECT_START")
  80                git checkout "$start_head" || exit
  81        else
  82                # Get rev from where we start.
  83                case "$head" in
  84                refs/heads/*|$_x40)
  85                        # This error message should only be triggered by
  86                        # cogito usage, and cogito users should understand
  87                        # it relates to cg-seek.
  88                        [ -s "$GIT_DIR/head-name" ] &&
  89                                die "won't bisect on seeked tree"
  90                        start_head="${head#refs/heads/}"
  91                        ;;
  92                *)
  93                        die "Bad HEAD - strange symbolic ref"
  94                        ;;
  95                esac
  96        fi
  97
  98        #
  99        # Get rid of any old bisect state.
 100        #
 101        bisect_clean_state || exit
 102
 103        #
 104        # Check for one bad and then some good revisions.
 105        #
 106        has_double_dash=0
 107        for arg; do
 108            case "$arg" in --) has_double_dash=1; break ;; esac
 109        done
 110        orig_args=$(sq "$@")
 111        bad_seen=0
 112        eval=''
 113        while [ $# -gt 0 ]; do
 114            arg="$1"
 115            case "$arg" in
 116            --)
 117                shift
 118                break
 119                ;;
 120            *)
 121                rev=$(git rev-parse -q --verify "$arg^{commit}") || {
 122                    test $has_double_dash -eq 1 &&
 123                        die "'$arg' does not appear to be a valid revision"
 124                    break
 125                }
 126                case $bad_seen in
 127                0) state='bad' ; bad_seen=1 ;;
 128                *) state='good' ;;
 129                esac
 130                eval="$eval bisect_write '$state' '$rev' 'nolog'; "
 131                shift
 132                ;;
 133            esac
 134        done
 135
 136        #
 137        # Change state.
 138        # In case of mistaken revs or checkout error, or signals received,
 139        # "bisect_auto_next" below may exit or misbehave.
 140        # We have to trap this to be able to clean up using
 141        # "bisect_clean_state".
 142        #
 143        trap 'bisect_clean_state' 0
 144        trap 'exit 255' 1 2 3 15
 145
 146        #
 147        # Write new start state.
 148        #
 149        echo "$start_head" >"$GIT_DIR/BISECT_START" &&
 150        sq "$@" >"$GIT_DIR/BISECT_NAMES" &&
 151        eval "$eval" &&
 152        echo "git bisect start$orig_args" >>"$GIT_DIR/BISECT_LOG" || exit
 153        #
 154        # Check if we can proceed to the next bisect state.
 155        #
 156        bisect_auto_next
 157
 158        trap '-' 0
 159}
 160
 161bisect_write() {
 162        state="$1"
 163        rev="$2"
 164        nolog="$3"
 165        case "$state" in
 166                bad)            tag="$state" ;;
 167                good|skip)      tag="$state"-"$rev" ;;
 168                *)              die "Bad bisect_write argument: $state" ;;
 169        esac
 170        git update-ref "refs/bisect/$tag" "$rev" || exit
 171        echo "# $state: $(git show-branch $rev)" >>"$GIT_DIR/BISECT_LOG"
 172        test -n "$nolog" || echo "git bisect $state $rev" >>"$GIT_DIR/BISECT_LOG"
 173}
 174
 175bisect_state() {
 176        bisect_autostart
 177        state=$1
 178        case "$#,$state" in
 179        0,*)
 180                die "Please call 'bisect_state' with at least one argument." ;;
 181        1,bad|1,good|1,skip)
 182                rev=$(git rev-parse --verify HEAD) ||
 183                        die "Bad rev input: HEAD"
 184                bisect_write "$state" "$rev" ;;
 185        2,bad|*,good|*,skip)
 186                shift
 187                eval=''
 188                for rev in "$@"
 189                do
 190                        sha=$(git rev-parse --verify "$rev^{commit}") ||
 191                                die "Bad rev input: $rev"
 192                        eval="$eval bisect_write '$state' '$sha'; "
 193                done
 194                eval "$eval" ;;
 195        *,bad)
 196                die "'git bisect bad' can take only one argument." ;;
 197        *)
 198                usage ;;
 199        esac
 200        bisect_auto_next
 201}
 202
 203bisect_next_check() {
 204        missing_good= missing_bad=
 205        git show-ref -q --verify refs/bisect/bad || missing_bad=t
 206        test -n "$(git for-each-ref "refs/bisect/good-*")" || missing_good=t
 207
 208        case "$missing_good,$missing_bad,$1" in
 209        ,,*)
 210                : have both good and bad - ok
 211                ;;
 212        *,)
 213                # do not have both but not asked to fail - just report.
 214                false
 215                ;;
 216        t,,good)
 217                # have bad but not good.  we could bisect although
 218                # this is less optimum.
 219                echo >&2 'Warning: bisecting only with a bad commit.'
 220                if test -t 0
 221                then
 222                        printf >&2 'Are you sure [Y/n]? '
 223                        case "$(read yesno)" in [Nn]*) exit 1 ;; esac
 224                fi
 225                : bisect without good...
 226                ;;
 227        *)
 228                THEN=''
 229                test -s "$GIT_DIR/BISECT_START" || {
 230                        echo >&2 'You need to start by "git bisect start".'
 231                        THEN='then '
 232                }
 233                echo >&2 'You '$THEN'need to give me at least one good' \
 234                        'and one bad revisions.'
 235                echo >&2 '(You can use "git bisect bad" and' \
 236                        '"git bisect good" for that.)'
 237                exit 1 ;;
 238        esac
 239}
 240
 241bisect_auto_next() {
 242        bisect_next_check && bisect_next || :
 243}
 244
 245eval_rev_list() {
 246        _eval="$1"
 247
 248        eval $_eval
 249        res=$?
 250
 251        if [ $res -ne 0 ]; then
 252                echo >&2 "'git rev-list --bisect-vars' failed:"
 253                echo >&2 "maybe you mistake good and bad revs?"
 254                exit $res
 255        fi
 256
 257        return $res
 258}
 259
 260filter_skipped() {
 261        _eval="$1"
 262        _skip="$2"
 263
 264        if [ -z "$_skip" ]; then
 265                eval_rev_list "$_eval"
 266                return
 267        fi
 268
 269        # Let's parse the output of:
 270        # "git rev-list --bisect-vars --bisect-all ..."
 271        eval_rev_list "$_eval" | while read hash line
 272        do
 273                case "$VARS,$FOUND,$TRIED,$hash" in
 274                        # We display some vars.
 275                        1,*,*,*) echo "$hash $line" ;;
 276
 277                        # Split line.
 278                        ,*,*,---*) ;;
 279
 280                        # We had nothing to search.
 281                        ,,,bisect_rev*)
 282                                echo "bisect_rev="
 283                                VARS=1
 284                                ;;
 285
 286                        # We did not find a good bisect rev.
 287                        # This should happen only if the "bad"
 288                        # commit is also a "skip" commit.
 289                        ,,*,bisect_rev*)
 290                                echo "bisect_rev=$TRIED"
 291                                VARS=1
 292                                ;;
 293
 294                        # We are searching.
 295                        ,,*,*)
 296                                TRIED="${TRIED:+$TRIED|}$hash"
 297                                case "$_skip" in
 298                                *$hash*) ;;
 299                                *)
 300                                        echo "bisect_rev=$hash"
 301                                        echo "bisect_tried=\"$TRIED\""
 302                                        FOUND=1
 303                                        ;;
 304                                esac
 305                                ;;
 306
 307                        # We have already found a rev to be tested.
 308                        ,1,*,bisect_rev*) VARS=1 ;;
 309                        ,1,*,*) ;;
 310
 311                        # ???
 312                        *) die "filter_skipped error " \
 313                            "VARS: '$VARS' " \
 314                            "FOUND: '$FOUND' " \
 315                            "TRIED: '$TRIED' " \
 316                            "hash: '$hash' " \
 317                            "line: '$line'"
 318                        ;;
 319                esac
 320        done
 321}
 322
 323exit_if_skipped_commits () {
 324        _tried=$1
 325        if expr "$_tried" : ".*[|].*" > /dev/null ; then
 326                echo "There are only 'skip'ped commit left to test."
 327                echo "The first bad commit could be any of:"
 328                echo "$_tried" | tr '[|]' '[\012]'
 329                echo "We cannot bisect more!"
 330                exit 2
 331        fi
 332}
 333
 334bisect_next() {
 335        case "$#" in 0) ;; *) usage ;; esac
 336        bisect_autostart
 337        bisect_next_check good
 338
 339        skip=$(git for-each-ref --format='%(objectname)' \
 340                "refs/bisect/skip-*" | tr '\012' ' ') || exit
 341
 342        BISECT_OPT=''
 343        test -n "$skip" && BISECT_OPT='--bisect-all'
 344
 345        bad=$(git rev-parse --verify refs/bisect/bad) &&
 346        good=$(git for-each-ref --format='^%(objectname)' \
 347                "refs/bisect/good-*" | tr '\012' ' ') &&
 348        eval="git rev-list --bisect-vars $BISECT_OPT $good $bad --" &&
 349        eval="$eval $(cat "$GIT_DIR/BISECT_NAMES")" &&
 350        eval=$(filter_skipped "$eval" "$skip") &&
 351        eval "$eval" || exit
 352
 353        if [ -z "$bisect_rev" ]; then
 354                echo "$bad was both good and bad"
 355                exit 1
 356        fi
 357        if [ "$bisect_rev" = "$bad" ]; then
 358                exit_if_skipped_commits "$bisect_tried"
 359                echo "$bisect_rev is first bad commit"
 360                git diff-tree --pretty $bisect_rev
 361                exit 0
 362        fi
 363
 364        # We should exit here only if the "bad"
 365        # commit is also a "skip" commit (see above).
 366        exit_if_skipped_commits "$bisect_rev"
 367
 368        echo "Bisecting: $bisect_nr revisions left to test after this"
 369        git checkout -q "$bisect_rev" || exit
 370        git show-branch "$bisect_rev"
 371}
 372
 373bisect_visualize() {
 374        bisect_next_check fail
 375
 376        if test $# = 0
 377        then
 378                case "${DISPLAY+set}${MSYSTEM+set}${SECURITYSESSIONID+set}" in
 379                '')     set git log ;;
 380                set*)   set gitk ;;
 381                esac
 382        else
 383                case "$1" in
 384                git*|tig) ;;
 385                -*)     set git log "$@" ;;
 386                *)      set git "$@" ;;
 387                esac
 388        fi
 389
 390        not=$(git for-each-ref --format='%(refname)' "refs/bisect/good-*")
 391        eval '"$@"' refs/bisect/bad --not $not -- $(cat "$GIT_DIR/BISECT_NAMES")
 392}
 393
 394bisect_reset() {
 395        test -s "$GIT_DIR/BISECT_START" || {
 396                echo "We are not bisecting."
 397                return
 398        }
 399        case "$#" in
 400        0) branch=$(cat "$GIT_DIR/BISECT_START") ;;
 401        1) git show-ref --verify --quiet -- "refs/heads/$1" ||
 402               die "$1 does not seem to be a valid branch"
 403           branch="$1" ;;
 404        *)
 405            usage ;;
 406        esac
 407        git checkout "$branch" && bisect_clean_state
 408}
 409
 410bisect_clean_state() {
 411        # There may be some refs packed during bisection.
 412        git for-each-ref --format='%(refname) %(objectname)' refs/bisect/\* |
 413        while read ref hash
 414        do
 415                git update-ref -d $ref $hash || exit
 416        done
 417        rm -f "$GIT_DIR/BISECT_LOG" &&
 418        rm -f "$GIT_DIR/BISECT_NAMES" &&
 419        rm -f "$GIT_DIR/BISECT_RUN" &&
 420        # Cleanup head-name if it got left by an old version of git-bisect
 421        rm -f "$GIT_DIR/head-name" &&
 422
 423        rm -f "$GIT_DIR/BISECT_START"
 424}
 425
 426bisect_replay () {
 427        test -r "$1" || die "cannot read $1 for replaying"
 428        bisect_reset
 429        while read git bisect command rev
 430        do
 431                test "$git $bisect" = "git bisect" -o "$git" = "git-bisect" || continue
 432                if test "$git" = "git-bisect"; then
 433                        rev="$command"
 434                        command="$bisect"
 435                fi
 436                case "$command" in
 437                start)
 438                        cmd="bisect_start $rev"
 439                        eval "$cmd" ;;
 440                good|bad|skip)
 441                        bisect_write "$command" "$rev" ;;
 442                *)
 443                        die "?? what are you talking about?" ;;
 444                esac
 445        done <"$1"
 446        bisect_auto_next
 447}
 448
 449bisect_run () {
 450    bisect_next_check fail
 451
 452    while true
 453    do
 454      echo "running $@"
 455      "$@"
 456      res=$?
 457
 458      # Check for really bad run error.
 459      if [ $res -lt 0 -o $res -ge 128 ]; then
 460          echo >&2 "bisect run failed:"
 461          echo >&2 "exit code $res from '$@' is < 0 or >= 128"
 462          exit $res
 463      fi
 464
 465      # Find current state depending on run success or failure.
 466      # A special exit code of 125 means cannot test.
 467      if [ $res -eq 125 ]; then
 468          state='skip'
 469      elif [ $res -gt 0 ]; then
 470          state='bad'
 471      else
 472          state='good'
 473      fi
 474
 475      # We have to use a subshell because "bisect_state" can exit.
 476      ( bisect_state $state > "$GIT_DIR/BISECT_RUN" )
 477      res=$?
 478
 479      cat "$GIT_DIR/BISECT_RUN"
 480
 481      if grep "first bad commit could be any of" "$GIT_DIR/BISECT_RUN" \
 482                > /dev/null; then
 483          echo >&2 "bisect run cannot continue any more"
 484          exit $res
 485      fi
 486
 487      if [ $res -ne 0 ]; then
 488          echo >&2 "bisect run failed:"
 489          echo >&2 "'bisect_state $state' exited with error code $res"
 490          exit $res
 491      fi
 492
 493      if grep "is first bad commit" "$GIT_DIR/BISECT_RUN" > /dev/null; then
 494          echo "bisect run success"
 495          exit 0;
 496      fi
 497
 498    done
 499}
 500
 501
 502case "$#" in
 5030)
 504    usage ;;
 505*)
 506    cmd="$1"
 507    shift
 508    case "$cmd" in
 509    help)
 510        git bisect -h ;;
 511    start)
 512        bisect_start "$@" ;;
 513    bad|good|skip)
 514        bisect_state "$cmd" "$@" ;;
 515    next)
 516        # Not sure we want "next" at the UI level anymore.
 517        bisect_next "$@" ;;
 518    visualize|view)
 519        bisect_visualize "$@" ;;
 520    reset)
 521        bisect_reset "$@" ;;
 522    replay)
 523        bisect_replay "$@" ;;
 524    log)
 525        cat "$GIT_DIR/BISECT_LOG" ;;
 526    run)
 527        bisect_run "$@" ;;
 528    *)
 529        usage ;;
 530    esac
 531esac