1// Please don't remove this comment as asciidoc behaves badly when 2// the first non-empty line is ifdef/ifndef. The symptom is that 3// without this comment the <git-diff-core> attribute conditionally 4// defined below ends up being defined unconditionally. 5// Last checked with asciidoc 7.0.2. 6 7ifndef::git-format-patch[] 8ifndef::git-diff[] 9ifndef::git-log[] 10:git-diff-core: 1 11endif::git-log[] 12endif::git-diff[] 13endif::git-format-patch[] 14 15ifdef::git-format-patch[] 16-p:: 17--no-stat:: 18 Generate plain patches without any diffstats. 19endif::git-format-patch[] 20 21ifndef::git-format-patch[] 22-p:: 23-u:: 24--patch:: 25 Generate patch (see section on generating patches). 26 {git-diff? This is the default.} 27endif::git-format-patch[] 28 29-U<n>:: 30--unified=<n>:: 31 Generate diffs with <n> lines of context instead of 32 the usual three. 33ifndef::git-format-patch[] 34 Implies `-p`. 35endif::git-format-patch[] 36 37ifndef::git-format-patch[] 38--raw:: 39 Generate the raw format. 40 {git-diff-core? This is the default.} 41endif::git-format-patch[] 42 43ifndef::git-format-patch[] 44--patch-with-raw:: 45 Synonym for `-p --raw`. 46endif::git-format-patch[] 47 48--minimal:: 49 Spend extra time to make sure the smallest possible 50 diff is produced. 51 52--patience:: 53 Generate a diff using the "patience diff" algorithm. 54 55--histogram:: 56 Generate a diff using the "histogram diff" algorithm. 57 58--stat[=<width>[,<name-width>[,<count>]]]:: 59 Generate a diffstat. By default, as much space as necessary 60 will be used for the filename part, and the rest for the graph 61 part. Maximum width defaults to terminal width, or 80 columns 62 if not connected to a terminal, and can be overridden by 63 `<width>`. The width of the filename part can be limited by 64 giving another width `<name-width>` after a comma. The width 65 of the graph part can be limited by using 66 `--stat-graph-width=<width>` (affects all commands generating 67 a stat graph) or by setting `diff.statGraphWidth=<width>` 68 (does not affect `git format-patch`). 69 By giving a third parameter `<count>`, you can limit the 70 output to the first `<count>` lines, followed by `...` if 71 there are more. 72+ 73These parameters can also be set individually with `--stat-width=<width>`, 74`--stat-name-width=<name-width>` and `--stat-count=<count>`. 75 76--numstat:: 77 Similar to `--stat`, but shows number of added and 78 deleted lines in decimal notation and pathname without 79 abbreviation, to make it more machine friendly. For 80 binary files, outputs two `-` instead of saying 81 `0 0`. 82 83--shortstat:: 84 Output only the last line of the `--stat` format containing total 85 number of modified files, as well as number of added and deleted 86 lines. 87 88--dirstat[=<param1,param2,...>]:: 89 Output the distribution of relative amount of changes for each 90 sub-directory. The behavior of `--dirstat` can be customized by 91 passing it a comma separated list of parameters. 92 The defaults are controlled by the `diff.dirstat` configuration 93 variable (see linkgit:git-config[1]). 94 The following parameters are available: 95+ 96-- 97`changes`;; 98 Compute the dirstat numbers by counting the lines that have been 99 removed from the source, or added to the destination. This ignores 100 the amount of pure code movements within a file. In other words, 101 rearranging lines in a file is not counted as much as other changes. 102 This is the default behavior when no parameter is given. 103`lines`;; 104 Compute the dirstat numbers by doing the regular line-based diff 105 analysis, and summing the removed/added line counts. (For binary 106 files, count 64-byte chunks instead, since binary files have no 107 natural concept of lines). This is a more expensive `--dirstat` 108 behavior than the `changes` behavior, but it does count rearranged 109 lines within a file as much as other changes. The resulting output 110 is consistent with what you get from the other `--*stat` options. 111`files`;; 112 Compute the dirstat numbers by counting the number of files changed. 113 Each changed file counts equally in the dirstat analysis. This is 114 the computationally cheapest `--dirstat` behavior, since it does 115 not have to look at the file contents at all. 116`cumulative`;; 117 Count changes in a child directory for the parent directory as well. 118 Note that when using `cumulative`, the sum of the percentages 119 reported may exceed 100%. The default (non-cumulative) behavior can 120 be specified with the `noncumulative` parameter. 121<limit>;; 122 An integer parameter specifies a cut-off percent (3% by default). 123 Directories contributing less than this percentage of the changes 124 are not shown in the output. 125-- 126+ 127Example: The following will count changed files, while ignoring 128directories with less than 10% of the total amount of changed files, 129and accumulating child directory counts in the parent directories: 130`--dirstat=files,10,cumulative`. 131 132--summary:: 133 Output a condensed summary of extended header information 134 such as creations, renames and mode changes. 135 136ifndef::git-format-patch[] 137--patch-with-stat:: 138 Synonym for `-p --stat`. 139endif::git-format-patch[] 140 141ifndef::git-format-patch[] 142 143-z:: 144ifdef::git-log[] 145 Separate the commits with NULs instead of with new newlines. 146+ 147Also, when `--raw` or `--numstat` has been given, do not munge 148pathnames and use NULs as output field terminators. 149endif::git-log[] 150ifndef::git-log[] 151 When `--raw`, `--numstat`, `--name-only` or `--name-status` has been 152 given, do not munge pathnames and use NULs as output field terminators. 153endif::git-log[] 154+ 155Without this option, each pathname output will have TAB, LF, double quotes, 156and backslash characters replaced with `\t`, `\n`, `\"`, and `\\`, 157respectively, and the pathname will be enclosed in double quotes if 158any of those replacements occurred. 159 160--name-only:: 161 Show only names of changed files. 162 163--name-status:: 164 Show only names and status of changed files. See the description 165 of the `--diff-filter` option on what the status letters mean. 166 167--submodule[=<format>]:: 168 Specify how differences in submodules are shown. When `--submodule` 169 or `--submodule=log` is given, the 'log' format is used. This format lists 170 the commits in the range like linkgit:git-submodule[1] `summary` does. 171 Omitting the `--submodule` option or specifying `--submodule=short`, 172 uses the 'short' format. This format just shows the names of the commits 173 at the beginning and end of the range. 174 175--color[=<when>]:: 176 Show colored diff. 177 The value must be `always` (the default for `<when>`), `never`, or `auto`. 178 The default value is `never`. 179ifdef::git-diff[] 180 It can be changed by the `color.ui` and `color.diff` 181 configuration settings. 182endif::git-diff[] 183 184--no-color:: 185 Turn off colored diff. 186ifdef::git-diff[] 187 This can be used to override configuration settings. 188endif::git-diff[] 189 It is the same as `--color=never`. 190 191--word-diff[=<mode>]:: 192 Show a word diff, using the <mode> to delimit changed words. 193 By default, words are delimited by whitespace; see 194 `--word-diff-regex` below. The <mode> defaults to 'plain', and 195 must be one of: 196+ 197-- 198color:: 199 Highlight changed words using only colors. Implies `--color`. 200plain:: 201 Show words as `[-removed-]` and `{+added+}`. Makes no 202 attempts to escape the delimiters if they appear in the input, 203 so the output may be ambiguous. 204porcelain:: 205 Use a special line-based format intended for script 206 consumption. Added/removed/unchanged runs are printed in the 207 usual unified diff format, starting with a `+`/`-`/` ` 208 character at the beginning of the line and extending to the 209 end of the line. Newlines in the input are represented by a 210 tilde `~` on a line of its own. 211none:: 212 Disable word diff again. 213-- 214+ 215Note that despite the name of the first mode, color is used to 216highlight the changed parts in all modes if enabled. 217 218--word-diff-regex=<regex>:: 219 Use <regex> to decide what a word is, instead of considering 220 runs of non-whitespace to be a word. Also implies 221 `--word-diff` unless it was already enabled. 222+ 223Every non-overlapping match of the 224<regex> is considered a word. Anything between these matches is 225considered whitespace and ignored(!) for the purposes of finding 226differences. You may want to append `|[^[:space:]]` to your regular 227expression to make sure that it matches all non-whitespace characters. 228A match that contains a newline is silently truncated(!) at the 229newline. 230+ 231The regex can also be set via a diff driver or configuration option, see 232linkgit:gitattributes[1] or linkgit:git-config[1]. Giving it explicitly 233overrides any diff driver or configuration setting. Diff drivers 234override configuration settings. 235 236--color-words[=<regex>]:: 237 Equivalent to `--word-diff=color` plus (if a regex was 238 specified) `--word-diff-regex=<regex>`. 239endif::git-format-patch[] 240 241--no-renames:: 242 Turn off rename detection, even when the configuration 243 file gives the default to do so. 244 245ifndef::git-format-patch[] 246--check:: 247 Warn if changes introduce whitespace errors. What are 248 considered whitespace errors is controlled by `core.whitespace` 249 configuration. By default, trailing whitespaces (including 250 lines that solely consist of whitespaces) and a space character 251 that is immediately followed by a tab character inside the 252 initial indent of the line are considered whitespace errors. 253 Exits with non-zero status if problems are found. Not compatible 254 with --exit-code. 255endif::git-format-patch[] 256 257--full-index:: 258 Instead of the first handful of characters, show the full 259 pre- and post-image blob object names on the "index" 260 line when generating patch format output. 261 262--binary:: 263 In addition to `--full-index`, output a binary diff that 264 can be applied with `git-apply`. 265 266--abbrev[=<n>]:: 267 Instead of showing the full 40-byte hexadecimal object 268 name in diff-raw format output and diff-tree header 269 lines, show only a partial prefix. This is 270 independent of the `--full-index` option above, which controls 271 the diff-patch output format. Non default number of 272 digits can be specified with `--abbrev=<n>`. 273 274-B[<n>][/<m>]:: 275--break-rewrites[=[<n>][/<m>]]:: 276 Break complete rewrite changes into pairs of delete and 277 create. This serves two purposes: 278+ 279It affects the way a change that amounts to a total rewrite of a file 280not as a series of deletion and insertion mixed together with a very 281few lines that happen to match textually as the context, but as a 282single deletion of everything old followed by a single insertion of 283everything new, and the number `m` controls this aspect of the -B 284option (defaults to 60%). `-B/70%` specifies that less than 30% of the 285original should remain in the result for git to consider it a total 286rewrite (i.e. otherwise the resulting patch will be a series of 287deletion and insertion mixed together with context lines). 288+ 289When used with -M, a totally-rewritten file is also considered as the 290source of a rename (usually -M only considers a file that disappeared 291as the source of a rename), and the number `n` controls this aspect of 292the -B option (defaults to 50%). `-B20%` specifies that a change with 293addition and deletion compared to 20% or more of the file's size are 294eligible for being picked up as a possible source of a rename to 295another file. 296 297-M[<n>]:: 298--find-renames[=<n>]:: 299ifndef::git-log[] 300 Detect renames. 301endif::git-log[] 302ifdef::git-log[] 303 If generating diffs, detect and report renames for each commit. 304 For following files across renames while traversing history, see 305 `--follow`. 306endif::git-log[] 307 If `n` is specified, it is a threshold on the similarity 308 index (i.e. amount of addition/deletions compared to the 309 file's size). For example, `-M90%` means git should consider a 310 delete/add pair to be a rename if more than 90% of the file 311 hasn't changed. 312 313-C[<n>]:: 314--find-copies[=<n>]:: 315 Detect copies as well as renames. See also `--find-copies-harder`. 316 If `n` is specified, it has the same meaning as for `-M<n>`. 317 318--find-copies-harder:: 319 For performance reasons, by default, `-C` option finds copies only 320 if the original file of the copy was modified in the same 321 changeset. This flag makes the command 322 inspect unmodified files as candidates for the source of 323 copy. This is a very expensive operation for large 324 projects, so use it with caution. Giving more than one 325 `-C` option has the same effect. 326 327-D:: 328--irreversible-delete:: 329 Omit the preimage for deletes, i.e. print only the header but not 330 the diff between the preimage and `/dev/null`. The resulting patch 331 is not meant to be applied with `patch` nor `git apply`; this is 332 solely for people who want to just concentrate on reviewing the 333 text after the change. In addition, the output obviously lack 334 enough information to apply such a patch in reverse, even manually, 335 hence the name of the option. 336+ 337When used together with `-B`, omit also the preimage in the deletion part 338of a delete/create pair. 339 340-l<num>:: 341 The `-M` and `-C` options require O(n^2) processing time where n 342 is the number of potential rename/copy targets. This 343 option prevents rename/copy detection from running if 344 the number of rename/copy targets exceeds the specified 345 number. 346 347ifndef::git-format-patch[] 348--diff-filter=[(A|C|D|M|R|T|U|X|B)...[*]]:: 349 Select only files that are Added (`A`), Copied (`C`), 350 Deleted (`D`), Modified (`M`), Renamed (`R`), have their 351 type (i.e. regular file, symlink, submodule, ...) changed (`T`), 352 are Unmerged (`U`), are 353 Unknown (`X`), or have had their pairing Broken (`B`). 354 Any combination of the filter characters (including none) can be used. 355 When `*` (All-or-none) is added to the combination, all 356 paths are selected if there is any file that matches 357 other criteria in the comparison; if there is no file 358 that matches other criteria, nothing is selected. 359 360-S<string>:: 361 Look for differences that introduce or remove an instance of 362 <string>. Note that this is different than the string simply 363 appearing in diff output; see the 'pickaxe' entry in 364 linkgit:gitdiffcore[7] for more details. 365 366-G<regex>:: 367 Look for differences whose added or removed line matches 368 the given <regex>. 369 370--pickaxe-all:: 371 When `-S` or `-G` finds a change, show all the changes in that 372 changeset, not just the files that contain the change 373 in <string>. 374 375--pickaxe-regex:: 376 Make the <string> not a plain string but an extended POSIX 377 regex to match. 378endif::git-format-patch[] 379 380-O<orderfile>:: 381 Output the patch in the order specified in the 382 <orderfile>, which has one shell glob pattern per line. 383 384ifndef::git-format-patch[] 385-R:: 386 Swap two inputs; that is, show differences from index or 387 on-disk file to tree contents. 388 389--relative[=<path>]:: 390 When run from a subdirectory of the project, it can be 391 told to exclude changes outside the directory and show 392 pathnames relative to it with this option. When you are 393 not in a subdirectory (e.g. in a bare repository), you 394 can name which subdirectory to make the output relative 395 to by giving a <path> as an argument. 396endif::git-format-patch[] 397 398-a:: 399--text:: 400 Treat all files as text. 401 402--ignore-space-at-eol:: 403 Ignore changes in whitespace at EOL. 404 405-b:: 406--ignore-space-change:: 407 Ignore changes in amount of whitespace. This ignores whitespace 408 at line end, and considers all other sequences of one or 409 more whitespace characters to be equivalent. 410 411-w:: 412--ignore-all-space:: 413 Ignore whitespace when comparing lines. This ignores 414 differences even if one line has whitespace where the other 415 line has none. 416 417--inter-hunk-context=<lines>:: 418 Show the context between diff hunks, up to the specified number 419 of lines, thereby fusing hunks that are close to each other. 420 421-W:: 422--function-context:: 423 Show whole surrounding functions of changes. 424 425ifndef::git-format-patch[] 426ifndef::git-log[] 427--exit-code:: 428 Make the program exit with codes similar to diff(1). 429 That is, it exits with 1 if there were differences and 430 0 means no differences. 431 432--quiet:: 433 Disable all output of the program. Implies `--exit-code`. 434endif::git-log[] 435endif::git-format-patch[] 436 437--ext-diff:: 438 Allow an external diff helper to be executed. If you set an 439 external diff driver with linkgit:gitattributes[5], you need 440 to use this option with linkgit:git-log[1] and friends. 441 442--no-ext-diff:: 443 Disallow external diff drivers. 444 445--textconv:: 446--no-textconv:: 447 Allow (or disallow) external text conversion filters to be run 448 when comparing binary files. See linkgit:gitattributes[5] for 449 details. Because textconv filters are typically a one-way 450 conversion, the resulting diff is suitable for human 451 consumption, but cannot be applied. For this reason, textconv 452 filters are enabled by default only for linkgit:git-diff[1] and 453 linkgit:git-log[1], but not for linkgit:git-format-patch[1] or 454 diff plumbing commands. 455 456--ignore-submodules[=<when>]:: 457 Ignore changes to submodules in the diff generation. <when> can be 458 either "none", "untracked", "dirty" or "all", which is the default 459 Using "none" will consider the submodule modified when it either contains 460 untracked or modified files or its HEAD differs from the commit recorded 461 in the superproject and can be used to override any settings of the 462 'ignore' option in linkgit:git-config[1] or linkgit:gitmodules[5]. When 463 "untracked" is used submodules are not considered dirty when they only 464 contain untracked content (but they are still scanned for modified 465 content). Using "dirty" ignores all changes to the work tree of submodules, 466 only changes to the commits stored in the superproject are shown (this was 467 the behavior until 1.7.0). Using "all" hides all changes to submodules. 468 469--src-prefix=<prefix>:: 470 Show the given source prefix instead of "a/". 471 472--dst-prefix=<prefix>:: 473 Show the given destination prefix instead of "b/". 474 475--no-prefix:: 476 Do not show any source or destination prefix. 477 478For more detailed explanation on these common options, see also 479linkgit:gitdiffcore[7].