--- /dev/null
+GIT v1.6.5 Release Notes
+========================
+
+In git 1.7.0, which is planned to be the release after 1.6.5, "git push"
+into a branch that is currently checked out will be refused by default.
+
+You can choose what should happen upon such a push by setting the
+configuration variable receive.denyCurrentBranch in the receiving
+repository.
+
+Also, "git push $there :$killed" to delete the branch $killed in a remote
+repository $there, when $killed branch is the current branch pointed at by
+its HEAD, will be refused by default.
+
+You can choose what should happen upon such a push by setting the
+configuration variable receive.denyDeleteCurrent in the receiving
+repository.
+
+To ease the transition plan, the receiving repository of such a
+push running this release will issue a big warning when the
+configuration variable is missing. Please refer to:
+
+ http://git.or.cz/gitwiki/GitFaq#non-bare
+ http://thread.gmane.org/gmane.comp.version-control.git/107758/focus=108007
+
+for more details on the reason why this change is needed and the
+transition plan.
+
+Updates since v1.6.4
+--------------------
+
+(subsystems)
+
+(portability)
+
+(performance)
+
+(usability, bells and whistles)
+
+(developers)
+
+Fixes since v1.6.4
+------------------
+
+# All of the fixes in v1.6.4.X maintenance series are included in this
+# release, unless otherwise noted.
+
+# Here are fixes that this release has, but have not been backported to
+# v1.6.4.X series.
+
+
pack.deltaCacheSize::
The maximum memory in bytes used for caching deltas in
- linkgit:git-pack-objects[1].
- A value of 0 means no limit. Defaults to 0.
+ linkgit:git-pack-objects[1] before writing them out to a pack.
+ This cache is used to speed up the writing object phase by not
+ having to recompute the final delta result once the best match
+ for all objects is found. Repacking large repositories on machines
+ which are tight with memory might be badly impacted by this though,
+ especially if this cache pushes the system into swapping.
+ A value of 0 means no limit. The smallest size of 1 byte may be
+ used to virtually disable this cache. Defaults to 256 MiB.
pack.deltaCacheLimit::
The maximum size of a delta, that is cached in
- linkgit:git-pack-objects[1]. Defaults to 1000.
+ linkgit:git-pack-objects[1]. This cache is used to speed up the
+ writing object phase by not having to recompute the final delta
+ result once the best match for all objects is found. Defaults to 1000.
pack.threads::
Specifies the number of threads to spawn when searching for best
-------
-d::
Remove untracked directories in addition to untracked files.
+ If an untracked directory is managed by a different git
+ repository, it is not removed by default. Use -f option twice
+ if you really want to remove such a directory.
-f::
If the git configuration specifies clean.requireForce as true,
allow that. So fake a tagger to be able to fast-import the
output.
+--no-data::
+ Skip output of blob objects and instead refer to blobs via
+ their original SHA-1 hash. This is useful when rewriting the
+ directory structure or history of a repository without
+ touching the contents of individual files. Note that the
+ resulting stream can only be used by a repository which
+ already contains the necessary objects.
+
[git-rev-list-args...]::
A list of arguments, acceptable to 'git-rev-parse' and
'git-rev-list', that specifies the specific objects and references
[-l | --files-with-matches] [-L | --files-without-match]
[-z | --null]
[-c | --count] [--all-match]
+ [--max-depth <depth>]
[--color | --no-color]
[-A <post-context>] [-B <pre-context>] [-C <context>]
[-f <file>] [-e] <pattern>
-I::
Don't match the pattern in binary files.
+--max-depth <depth>::
+ For each pathspec given on command line, descend at most <depth>
+ levels of directories. A negative value means no limit.
+
-w::
--word-regexp::
Match the pattern only at word boundary (either begin at the
SYNOPSIS
--------
-'git init-db' [-q | --quiet] [--template=<template_directory>] [--shared[=<permissions>]]
+'git init-db' [-q | --quiet] [--
bare] [--template=<template_directory>] [--shared[=<permissions>]]
DESCRIPTION
SYNOPSIS
--------
-'git init' [-q | --quiet] [--bare] [--template=<template_directory>] [--shared[=<permissions>]]
+'git init' [-q | --quiet] [--bare] [--template=<template_directory>] [--shared[=<permissions>]] [directory]
OPTIONS
in shared repositories, so that you cannot force a non fast-forwarding push
into it.
+If you name a (possibly non-existent) directory at the end of the command
+line, the command is run inside the directory (possibly after creating it).
+
--
-o::
--others::
- Show other files in the output
+ Show other (i.e. untracked) files in the output
-i::
--ignored::
SYNOPSIS
--------
-'git merge-base' [--all] <commit> <commit>...
+'git merge-base' [-a|--all] <commit> <commit>...
DESCRIPTION
-----------
-'git-merge-base' finds best common ancestor(s) between two commits to use
+'git merge-base' finds best common ancestor(s) between two commits to use
in a three-way merge. One common ancestor is 'better' than another common
ancestor if the latter is an ancestor of the former. A common ancestor
that does not have any better common ancestor is a 'best common
two commits on the command line means computing the merge base between
the given two commits.
+As a consequence, the 'merge base' is not necessarily contained in each of the
+commit arguments if more than two commits are specified. This is different
+from linkgit:git-show-branch[1] when used with the `--merge-base` option.
+
OPTIONS
-------
+-a::
--all::
Output all merge bases for the commits, instead of just one.
SYNOPSIS
--------
-'git prune-packed' [-n] [-q]
+'git prune-packed' [-n|--dry-run] [-q|--quiet]
DESCRIPTION
OPTIONS
-------
-n::
+--dry-run::
Don't actually remove any objects, only show those that would have been
removed.
-q::
+--quiet::
Squelch the progress indicator.
Author
SYNOPSIS
--------
-'git read-tree' (<tree-ish> | [[-m [--trivial] [--aggressive] | --reset | --prefix=<prefix>] [-u | -i]] [--exclude-per-directory=<gitignore>] [--index-output=<file>] <tree-ish1> [<tree-ish2> [<tree-ish3>]])
+'git read-tree' [[-m [--trivial] [--aggressive] | --reset | --prefix=<prefix>]
+ [-u [--exclude-per-directory=<gitignore>] | -i]]
+ [--index-output=<file>]
+ <tree-ish1> [<tree-ish2> [<tree-ish3>]]
DESCRIPTION
DESCRIPTION
-----------
-Lists commit objects in reverse chronological order starting at the
-given commit(s), taking ancestry relationship into account. This is
-useful to produce human-readable log output.
+List commits that are reachable by following the `parent` links from the
+given commit(s), but exclude commits that are reachable from the one(s)
+given with a '{caret}' in front of them. The output is given in reverse
+chronological order by default.
-Commits which are stated with a preceding '{caret}' cause listing to
-stop at that point. Their parents are implied. Thus the following
-command:
+You can think of this as a set operation. Commits given on the command
+line form a set of commits that are reachable from any of them, and then
+commits reachable from any of the ones given with '{caret}' in front are
+subtracted from that set. The remaining commits are what comes out in the
+command's output. Various other options and paths parameters can be used
+to further limit the result.
+
+Thus, the following command:
-----------------------------------------------------------------------
$ git rev-list foo bar ^baz
-----------------------------------------------------------------------
-means "list all the commits which are included in 'foo' and 'bar', but
-not in 'baz'".
+means "list all the commits which are reachable from 'foo' or 'bar', but
+not from 'baz'".
A special notation "'<commit1>'..'<commit2>'" can be used as a
short-hand for "{caret}'<commit1>' '<commit2>'". For example, either of
--smtp-server-port=<port>::
Specifies a port different from the default port (SMTP
- servers typically listen to smtp port 25 and ssmtp port
- 465); symbolic port names (e.g. "submission" instead of 465)
+ servers typically listen to smtp port 25, but may also listen to
+ submission port 587, or the common SSL smtp port 465);
+ symbolic port names (e.g. "submission" instead of 587)
are also accepted. The port can also be set with the
'sendemail.smtpserverport' configuration variable.
SYNOPSIS
--------
[verse]
-'git show-branch' [--all] [--remotes] [--topo-order | --date-order]
- [--current] [--color | --no-color]
+'git show-branch' [-a|--all] [-r|--remotes] [--topo-order | --date-order]
+ [--current] [--color | --no-color] [--sparse]
[--more=<n> | --list | --independent | --merge-base]
[--no-name | --sha1-name] [--topics]
[<rev> | <glob>]...
+
'git show-branch' (-g|--reflog)[=<n>[,<base>]] [--list] [<ref>]
DESCRIPTION
Synonym to `--more=-1`
--merge-base::
- Instead of showing the commit list, just act like the
- 'git-merge-base -a' command, except that it can accept
- more than two heads.
+ Instead of showing the commit list, determine possible
+ merge bases for the specified commits. All merge bases
+ will be contained in all specified commits. This is
+ different from how linkgit:git-merge-base[1] handles
+ the case of three or more commits.
--independent::
Among the <reference>s given, display only the ones that
clear::
Remove all the stashed states. Note that those states will then
- be subject to pruning, and may be difficult or impossible to recover.
+ be subject to pruning, and may be impossible to recover (see
+ 'Examples' below for a possible strategy).
drop [-q|--quiet] [<stash>]::
$ git commit foo -m 'Remaining parts'
----------------------------------------------------------------
+Recovering stashes that were cleared/dropped erroneously::
+
+If you mistakenly drop or clear stashes, they cannot be recovered
+through the normal safety mechanisms. However, you can try the
+following incantation to get a list of stashes that are still in your
+repository, but not reachable any more:
++
+----------------------------------------------------------------
+git fsck --unreachable |
+grep commit | cut -d\ -f3 |
+xargs git log --merges --no-walk --grep=WIP
+----------------------------------------------------------------
+
+
SEE ALSO
--------
linkgit:git-checkout[1],
DESCRIPTION
-----------
-Adds a 'tag' reference in `.git/refs/tags/`
+
+Adds a 'tag' reference in `.git/refs/tags/`. The tag <name> must pass
+linkgit:git-check-ref-format[1] which basicly means that control characters,
+space, ~, ^, :, ?, *, [ and \ are prohibited.
Unless `-f` is given, the tag must not yet exist in
`.git/refs/tags/` directory.
SYNOPSIS
--------
-'git verify-pack' [-v] [--] <pack>.idx ...
+'git verify-pack' [-v
|--verbose] [--] <pack>.idx ...
DESCRIPTION
The idx files to verify.
-v::
+--verbose::
After verifying the pack, show list of objects contained
in the pack.
\--::
--- /dev/null
+gittutorial(7)
+==============
+
+NAME
+----
+gittutorial - Um tutorial de introdução ao git (para versão 1.5.1 ou mais nova)
+
+SYNOPSIS
+--------
+git *
+
+DESCRIPTION
+-----------
+
+Este tutorial explica como importar um novo projeto para o git,
+adicionar mudanças a ele, e compartilhar mudanças com outros
+desenvolvedores.
+
+Se, ao invés disso, você está interessado primariamente em usar git para
+obter um projeto, por exemplo, para testar a última versão, você pode
+preferir começar com os primeiros dois capítulos de
+link:user-manual.html[O Manual do Usuário Git].
+
+Primeiro, note que você pode obter documentação para um comando como
+`git log --graph` com:
+
+------------------------------------------------
+$ man git-log
+------------------------------------------------
+
+ou:
+
+------------------------------------------------
+$ git help log
+------------------------------------------------
+
+Com a última forma, você pode usar o visualizador de manual de sua
+escolha; veja linkgit:git-help[1] para maior informação.
+
+É uma boa idéia informar ao git seu nome e endereço público de email
+antes de fazer qualquer operação. A maneira mais fácil de fazê-lo é:
+
+------------------------------------------------
+$ git config --global user.name "Seu Nome Vem Aqui"
+$ git config --global user.email voce@seudominio.exemplo.com
+------------------------------------------------
+
+
+Importando um novo projeto
+-----------------------
+
+Assuma que você tem um tarball project.tar.gz com seu trabalho inicial.
+Você pode colocá-lo sob controle de revisão git da seguinte forma:
+
+------------------------------------------------
+$ tar xzf project.tar.gz
+$ cd project
+$ git init
+------------------------------------------------
+
+Git irá responder
+
+------------------------------------------------
+Initialized empty Git repository in .git/
+------------------------------------------------
+
+Você agora iniciou seu diretório de trabalho--você deve ter notado um
+novo diretório criado, com o nome de ".git".
+
+A seguir, diga ao git para gravar um instantâneo do conteúdo de todos os
+arquivos sob o diretório corrente (note o '.'), com 'git-add':
+
+------------------------------------------------
+$ git add .
+------------------------------------------------
+
+Este instantâneo está agora armazenado em uma área temporária que o git
+chama de "index" ou índice. Você pode armazenar permanentemente o
+conteúdo do índice no repositório com 'git-commit':
+
+------------------------------------------------
+$ git commit
+------------------------------------------------
+
+Isto vai te pedir por uma mensagem de commit. Você agora gravou sua
+primeira versão de seu projeto no git.
+
+Fazendo mudanças
+--------------
+
+Modifique alguns arquivos, e, então, adicione seu conteúdo atualizado ao
+índice:
+
+------------------------------------------------
+$ git add file1 file2 file3
+------------------------------------------------
+
+Você está agora pronto para fazer o commit. Você pode ver o que está
+para ser gravado usando 'git-diff' com a opção --cached:
+
+------------------------------------------------
+$ git diff --cached
+------------------------------------------------
+
+(Sem --cached, o comando 'git-diff' irá te mostrar quaisquer mudanças
+que você tenha feito mas ainda não adicionou ao índice.) Você também
+pode obter um breve sumário da situação com 'git-status':
+
+------------------------------------------------
+$ git status
+# On branch master
+# Changes to be committed:
+# (use "git reset HEAD <file>..." to unstage)
+#
+# modified: file1
+# modified: file2
+# modified: file3
+#
+------------------------------------------------
+
+Se você precisar fazer qualquer outro ajuste, faça-o agora, e, então,
+adicione qualquer conteúdo modificado ao índice. Finalmente, grave suas
+mudanças com:
+
+------------------------------------------------
+$ git commit
+------------------------------------------------
+
+Isto irá novamente te pedir por uma mensagem descrevendo a mudança, e,
+então, gravar a nova versão do projeto.
+
+Alternativamente, ao invés de executar 'git-add' antes, você pode usar
+
+------------------------------------------------
+$ git commit -a
+------------------------------------------------
+
+o que irá automaticamente notar quaisquer arquivos modificados (mas não
+novos), adicioná-los ao índices, e gravar, tudo em um único passo.
+
+Uma nota em mensagens de commit: Apesar de não ser exigido, é uma boa
+idéia começar a mensagem com uma simples e curta (menos de 50
+caracteres) linha sumarizando a mudança, seguida de uma linha em branco
+e, então, uma descrição mais detalhada. Ferramentas que transformam
+commits em email, por exemplo, usam a primeira linha no campo de
+cabeçalho Subject: e o resto no corpo.
+
+Git rastreia conteúdo, não arquivos
+----------------------------
+
+Muitos sistemas de controle de revisão provêem um comando `add` que diz
+ao sistema para começar a rastrear mudanças em um novo arquivo. O
+comando `add` do git faz algo mais simples e mais poderoso: 'git-add' é
+usado tanto para arquivos novos e arquivos recentemente modificados, e
+em ambos os casos, ele tira o instantâneo dos arquivos dados e armazena
+o conteúdo no índice, pronto para inclusão do próximo commit.
+
+Visualizando história do projeto
+-----------------------
+
+Em qualquer ponto você pode visualizar a história das suas mudanças
+usando
+
+------------------------------------------------
+$ git log
+------------------------------------------------
+
+Se você também quer ver a diferença completa a cada passo, use
+
+------------------------------------------------
+$ git log -p
+------------------------------------------------
+
+Geralmente, uma visão geral da mudança é útil para ter a sensação de
+cada passo
+
+------------------------------------------------
+$ git log --stat --summary
+------------------------------------------------
+
+Gerenciando "branches"/ramos
+-----------------
+
+Um simples repositório git pode manter múltiplos ramos de
+desenvolvimento. Para criar um novo ramo chamado "experimental", use
+
+------------------------------------------------
+$ git branch experimental
+------------------------------------------------
+
+Se você executar agora
+
+------------------------------------------------
+$ git branch
+------------------------------------------------
+
+você vai obter uma lista de todos os ramos existentes:
+
+------------------------------------------------
+ experimental
+* master
+------------------------------------------------
+
+O ramo "experimental" é o que você acaba de criar, e o ramo "master" é o
+ramo padrão que foi criado pra você automaticamente. O asterisco marca
+o ramo em que você está atualmente; digite
+
+------------------------------------------------
+$ git checkout experimental
+------------------------------------------------
+
+para mudar para o ramo experimental. Agora edite um arquivo, grave a
+mudança, e mude de volta para o ramo master:
+
+------------------------------------------------
+(edita arquivo)
+$ git commit -a
+$ git checkout master
+------------------------------------------------
+
+Verifique que a mudança que você fez não está mais visível, já que ela
+foi feita no ramo experimental e você está de volta ao ramo master.
+
+Você pode fazer uma mudança diferente no ramo master:
+
+------------------------------------------------
+(edit file)
+$ git commit -a
+------------------------------------------------
+
+neste ponto, os dois ramos divergiram, com diferentes mudanças feitas em
+cada um. Para unificar as mudanças feitas no experimental para o
+master, execute
+
+------------------------------------------------
+$ git merge experimental
+------------------------------------------------
+
+Se as mudanças não conflitarem, estará pronto. Se existirem conflitos,
+marcadores serão deixados nos arquivos problemáticos exibindo o
+conflito;
+
+------------------------------------------------
+$ git diff
+------------------------------------------------
+
+vai exibir isto. Após você editar os arquivos para resolver os
+conflitos,
+
+------------------------------------------------
+$ git commit -a
+------------------------------------------------
+
+irá gravar o resultado da unificação. Finalmente,
+
+------------------------------------------------
+$ gitk
+------------------------------------------------
+
+vai mostrar uma bela representação gráfica da história resultante.
+
+Neste ponto você pode remover seu ramo experimental com
+
+------------------------------------------------
+$ git branch -d experimental
+------------------------------------------------
+
+Este comando garante que as mudanças no ramo experimental já estão no
+ramo atual.
+
+Se você desenvolve em um ramo ideia-louca, e se arrepende, você pode
+sempre remover o ramo com
+
+-------------------------------------
+$ git branch -D ideia-louca
+-------------------------------------
+
+Ramos são baratos e fáceis, então isto é uma boa maneira de experimentar
+alguma coisa.
+
+Usando git para colaboração
+---------------------------
+
+Suponha que Alice começou um novo projeto com um repositório git em
+/home/alice/project, e que Bob, que tem um diretório home na mesma
+máquina, quer contribuir.
+
+Bob começa com:
+
+------------------------------------------------
+bob$ git clone /home/alice/project myrepo
+------------------------------------------------
+
+Isso cria um novo diretório "myrepo" contendo um clone do repositório de
+Alice. O clone está no mesmo pé que o projeto original, possuindo sua
+própria cópia da história do projeto original.
+
+Bob então faz algumas mudanças e as grava:
+
+------------------------------------------------
+(editar arquivos)
+bob$ git commit -a
+(repetir conforme necessário)
+------------------------------------------------
+
+Quanto está pronto, ele diz a Alice para puxar as mudanças do
+repositório em /home/bob/myrepo. Ela o faz com:
+
+------------------------------------------------
+alice$ cd /home/alice/project
+alice$ git pull /home/bob/myrepo master
+------------------------------------------------
+
+Isto unifica as mudanças do ramo "master" do Bob ao ramo atual de Alice.
+Se Alice fez suas próprias mudanças no intervalo, ela, então, pode
+precisar corrigir manualmente quaisquer conflitos. (Note que o argumento
+"master" no comando acima é, de fato, desnecessário, já que é o padrão.)
+
+O comando "pull" executa, então, duas operações: ele obtém mudanças de
+um ramo remoto, e, então, as unifica no ramo atual.
+
+Note que, em geral, Alice gostaria que suas mudanças locais fossem
+gravadas antes de iniciar este "pull". Se o trabalho de Bob conflita
+com o que Alice fez desde que suas histórias se ramificaram, Alice irá
+usar seu diretório de trabalho e o índice para resolver conflitos, e
+mudanças locais existentes irão interferir com o processo de resolução
+de conflitos (git ainda irá realizar a obtenção mas irá se recusar a
+unificar --- Alice terá que se livrar de suas mudanças locais de alguma
+forma e puxar de novo quando isso acontecer).
+
+Alice pode espiar o que Bob fez sem unificar primeiro, usando o comando
+"fetch"; isto permite Alice inspecionar o que Bob fez, usando um símbolo
+especial "FETCH_HEAD", com o fim de determinar se ele tem alguma coisa
+que vale puxar, assim:
+
+------------------------------------------------
+alice$ git fetch /home/bob/myrepo master
+alice$ git log -p HEAD..FETCH_HEAD
+------------------------------------------------
+
+Esta operação é segura mesmo se Alice tem mudanças locais não gravadas.
+A notação de intervalo "HEAD..FETCH_HEAD" significa mostrar tudo que é
+alcançável de FETCH_HEAD mas exclua tudo o que é alcançável de HEAD.
+Alice já sabe tudo que leva a seu estado atual (HEAD), e revisa o que Bob
+tem em seu estado (FETCH_HEAD) que ela ainda não viu com esse comando.
+
+Se Alice quer visualizar o que Bob fez desde que suas histórias se
+ramificaram, ela pode disparar o seguinte comando:
+
+------------------------------------------------
+$ gitk HEAD..FETCH_HEAD
+------------------------------------------------
+
+Isto usa a mesma notação de intervalo que vimos antes com 'git log'.
+
+Alice pode querer ver o que ambos fizeram desde que ramificaram. Ela
+pode usar a forma com três pontos ao invés da forma com dois pontos:
+
+------------------------------------------------
+$ gitk HEAD...FETCH_HEAD
+------------------------------------------------
+
+Isto significa "mostre tudo que é alcançável de qualquer um deles, mas
+exclua tudo que é alcançável a partir de ambos".
+
+Por favor, note que essas notações de intervalo podem ser usadas tanto
+com gitk quanto com "git log".
+
+Após inspecionar o que Bob fez, se não há nada urgente, Alice pode
+decidir continuar trabalhando sem puxar de Bob. Se a história de Bob
+tem alguma coisa que Alice precisa imediatamente, Alice pode optar por
+separar seu trabalho em progresso primeiro, fazer um "pull", e, então,
+finalmente, retomar seu trabalho em progresso em cima da história
+resultante.
+
+Quando você está trabalhando em um pequeno grupo unido, não é incomum
+interagir com o mesmo repositório várias e várias vezes. Definindo um
+repositório remoto antes de tudo, você pode fazê-lo mais facilmente:
+
+------------------------------------------------
+alice$ git remote add bob /home/bob/myrepo
+------------------------------------------------
+
+Com isso, Alice pode executar a primeira parte da operação "pull" usando
+o comando 'git-fetch' sem unificar suas mudanças com seu próprio ramo,
+usando:
+
+-------------------------------------
+alice$ git fetch bob
+-------------------------------------
+
+Diferente da forma longa, quando Alice obteve de Bob usando um
+repositório remoto antes definido com 'git-remote', o que foi obtido é
+armazenado em um ramo remoto, neste caso `bob/master`. Então, após isso:
+
+-------------------------------------
+alice$ git log -p master..bob/master
+-------------------------------------
+
+mostra uma lista de todas as mudanças que Bob fez desde que ramificou do
+ramo master de Alice.
+
+Após examinar essas mudanças, Alice pode unificá-las em seu ramo master:
+
+-------------------------------------
+alice$ git merge bob/master
+-------------------------------------
+
+Esse `merge` pode também ser feito puxando de seu próprio ramo remoto,
+assim:
+
+-------------------------------------
+alice$ git pull . remotes/bob/master
+-------------------------------------
+
+Note que 'git pull' sempre unifica ao ramo atual, independente do que
+mais foi passado na linha de comando.
+
+Depois, Bob pode atualizar seu repositório com as últimas mudanças de
+Alice, usando
+
+-------------------------------------
+bob$ git pull
+-------------------------------------
+
+Note que ele não precisa dar o caminho do repositório de Alice; quando
+Bob clonou seu repositório, o git armazenou a localização de seu
+repositório na configuração do mesmo, e essa localização é usada
+para puxar:
+
+-------------------------------------
+bob$ git config --get remote.origin.url
+/home/alice/project
+-------------------------------------
+
+(A configuração completa criada por 'git-clone' é visível usando `git
+config -l`, e a página de manual linkgit:git-config[1] explica o
+significado de cada opção.)
+
+Git também mantém uma cópia limpa do ramo master de Alice sob o nome
+"origin/master":
+
+-------------------------------------
+bob$ git branch -r
+ origin/master
+-------------------------------------
+
+Se Bob decidir depois em trabalhar em um host diferente, ele ainda pode
+executar clones e puxar usando o protocolo ssh:
+
+-------------------------------------
+bob$ git clone alice.org:/home/alice/project myrepo
+-------------------------------------
+
+Alternativamente, o git tem um protocolo nativo, ou pode usar rsync ou
+http; veja linkgit:git-pull[1] para detalhes.
+
+Git pode também ser usado em um modo parecido com CVS, com um
+repositório central para o qual vários usuários empurram modificações;
+veja linkgit:git-push[1] e linkgit:gitcvs-migration[7].
+
+Explorando história
+-----------------
+
+A história no git é representada como uma série de commits
+interrelacionados. Nós já vimos que o comando 'git-log' pode listar
+esses commits. Note que a primeira linha de cada entrada no log também
+dá o nome para o commit:
+
+-------------------------------------
+$ git log
+commit c82a22c39cbc32576f64f5c6b3f24b99ea8149c7
+Author: Junio C Hamano <junkio@cox.net>
+Date: Tue May 16 17:18:22 2006 -0700
+
+ merge-base: Clarify the comments on post processing.
+-------------------------------------
+
+Nós podemos dar este nome ao 'git-show' para ver os detalhes sobre este
+commit.
+
+-------------------------------------
+$ git show c82a22c39cbc32576f64f5c6b3f24b99ea8149c7
+-------------------------------------
+
+Mas há outras formas de se referir aos commits. Você pode usar qualquer
+parte inicial do nome que seja longo o bastante para identificar
+unicamente o commit:
+
+-------------------------------------
+$ git show c82a22c39c # os primeiros caracteres do nome são o bastante
+ # usualmente
+$ git show HEAD # a ponta do ramo atual
+$ git show experimental # a ponta do ramo "experimental"
+-------------------------------------
+
+Todo commit normalmente tem um commit "pai" que aponta para o estado
+anterior do projeto:
+
+-------------------------------------
+$ git show HEAD^ # para ver o pai de HEAD
+$ git show HEAD^^ # para ver o avô de HEAD
+$ git show HEAD~4 # para ver o trisavô de HEAD
+-------------------------------------
+
+Note que commits de unificação podem ter mais de um pai:
+
+-------------------------------------
+$ git show HEAD^1 # mostra o primeiro pai de HEAD (o mesmo que HEAD^)
+$ git show HEAD^2 # mostra o segundo pai de HEAD
+-------------------------------------
+
+Você também pode dar aos commits nomes à sua escolha; após executar
+
+-------------------------------------
+$ git tag v2.5 1b2e1d63ff
+-------------------------------------
+
+você pode se referir a 1b2e1d63ff pelo nome "v2.5". Se você pretende
+compartilhar esse nome com outras pessoas (por exemplo, para identificar
+uma versão de lançamento), você deveria criar um objeto "tag", e talvez
+assiná-lo; veja linkgit:git-tag[1] para detalhes.
+
+Qualquer comando git que precise conhecer um commit pode receber
+quaisquer desses nomes. Por exemplo:
+
+-------------------------------------
+$ git diff v2.5 HEAD # compara o HEAD atual com v2.5
+$ git branch stable v2.5 # inicia um novo ramo chamado "stable" baseado
+ # em v2.5
+$ git reset --hard HEAD^ # reseta seu ramo atual e seu diretório de
+ # trabalho a seu estado em HEAD^
+-------------------------------------
+
+Seja cuidadoso com o último comando: além de perder quaisquer mudanças
+em seu diretório de trabalho, ele também remove todos os commits
+posteriores desse ramo. Se esse ramo é o único ramo contendo esses
+commits, eles serão perdidos. Também, não use 'git-reset' num ramo
+publicamente visível de onde outros desenvolvedores puxam, já que vai
+forçar unificações desnecessárias para que outros desenvolvedores limpem
+a história. Se você precisa desfazer mudanças que você empurrou, use
+'git-revert' no lugar.
+
+O comando 'git-grep' pode buscar strings em qualquer versão de seu
+projeto, então
+
+-------------------------------------
+$ git grep "hello" v2.5
+-------------------------------------
+
+procura por todas as ocorrências de "hello" em v2.5.
+
+Se você deixar de fora o nome do commit, 'git-grep' irá procurar
+quaisquer dos arquivos que ele gerencia no diretório corrente. Então
+
+-------------------------------------
+$ git grep "hello"
+-------------------------------------
+
+é uma forma rápida de buscar somente os arquivos que são rastreados pelo
+git.
+
+Muitos comandos git também recebem um conjunto de commits, o que pode
+ser especificado de várias formas. Aqui estão alguns exemplos com 'git-log':
+
+-------------------------------------
+$ git log v2.5..v2.6 # commits entre v2.5 e v2.6
+$ git log v2.5.. # commits desde v2.5
+$ git log --since="2 weeks ago" # commits das últimas 2 semanas
+$ git log v2.5.. Makefile # commits desde v2.5 que modificam
+ # Makefile
+-------------------------------------
+
+Você também pode dar ao 'git-log' um "intervalo" de commits onde o
+primeiro não é necessariamente um ancestral do segundo; por exemplo, se
+as pontas dos ramos "stable" e "master" divergiram de um commit
+comum algum tempo atrás, então
+
+-------------------------------------
+$ git log stable..master
+-------------------------------------
+
+irá listar os commits feitos no ramo "master" mas não no ramo
+"stable", enquanto
+
+-------------------------------------
+$ git log master..stable
+-------------------------------------
+
+irá listar a lista de commits feitos no ramo "stable" mas não no ramo
+"master".
+
+O comando 'git-log' tem uma fraqueza: ele precisa mostrar os commits em
+uma lista. Quando a história tem linhas de desenvolvimento que
+divergiram e então foram unificadas novamente, a ordem em que 'git-log'
+apresenta essas mudanças é irrelevante.
+
+A maioria dos projetos com múltiplos contribuidores (como o kernel
+Linux, ou o próprio git) tem unificações frequentes, e 'gitk' faz um
+trabalho melhor de visualizar sua história. Por exemplo,
+
+-------------------------------------
+$ gitk --since="2 weeks ago" drivers/
+-------------------------------------
+
+permite a você navegar em quaisquer commits desde as últimas duas semanas
+de commits que modificaram arquivos sob o diretório "drivers". (Nota:
+você pode ajustar as fontes do gitk segurando a tecla control enquanto
+pressiona "-" ou "+".)
+
+Finalmente, a maioria dos comandos que recebem nomes de arquivo permitirão
+também, opcionalmente, preceder qualquer nome de arquivo por um
+commit, para especificar uma versão particular do arquivo:
+
+-------------------------------------
+$ git diff v2.5:Makefile HEAD:Makefile.in
+-------------------------------------
+
+Você pode usar 'git-show' para ver tal arquivo:
+
+-------------------------------------
+$ git show v2.5:Makefile
+-------------------------------------
+
+Próximos passos
+----------
+
+Este tutorial deve ser o bastante para operar controle de revisão
+distribuído básico para seus projetos. No entanto, para entender
+plenamente a profundidade e o poder do git você precisa entender duas
+idéias simples nas quais ele se baseia:
+
+ * A base de objetos é um sistema bem elegante usado para armazenar a
+ história de seu projeto--arquivos, diretórios, e commits.
+
+ * O arquivo de índice é um cache do estado de uma árvore de diretório,
+ usado para criar commits, restaurar diretórios de trabalho, e
+ armazenar as várias árvores envolvidas em uma unificação.
+
+A parte dois deste tutorial explica a base de objetos, o arquivo de
+índice, e algumas outras coisinhas que você vai precisar pra usar o
+máximo do git. Você pode encontrá-la em linkgit:gittutorial-2[7].
+
+Se você não quiser continuar com o tutorial agora nesse momento, algumas
+outras digressões que podem ser interessantes neste ponto são:
+
+ * linkgit:git-format-patch[1], linkgit:git-am[1]: Estes convertem
+ séries de commits em patches para email, e vice-versa, úteis para
+ projetos como o kernel Linux que dependem fortemente de patches
+ enviados por email.
+
+ * linkgit:git-bisect[1]: Quando há uma regressão em seu projeto, uma
+ forma de rastrear um bug é procurando pela história para encontrar o
+ commit culpado. Git bisect pode ajudar a executar uma busca binária
+ por esse commit. Ele é inteligente o bastante para executar uma
+ busca próxima da ótima mesmo no caso de uma história complexa
+ não-linear com muitos ramos unificados.
+
+ * link:everyday.html[GIT diariamente com 20 e tantos comandos]
+
+ * linkgit:gitcvs-migration[7]: Git para usuários de CVS.
+
+VEJA TAMBÉM
+--------
+linkgit:gittutorial-2[7],
+linkgit:gitcvs-migration[7],
+linkgit:gitcore-tutorial[7],
+linkgit:gitglossary[7],
+linkgit:git-help[1],
+link:everyday.html[git diariamente],
+link:user-manual.html[O Manual do Usuário git]
+
+GIT
+---
+Parte da suite linkgit:git[1].
Convenience functions that encapsulate a sequence of
start_command() followed by finish_command(). The argument argv
specifies the program and its arguments. The argument opt is zero
- or more of the flags `RUN_COMMAND_NO_STDIN`, `RUN_GIT_CMD`, or
- `RUN_COMMAND_STDOUT_TO_STDERR` that correspond to the members
- .no_stdin, .git_cmd, .stdout_to_stderr of `struct child_process`.
+ or more of the flags `RUN_COMMAND_NO_STDIN`, `RUN_GIT_CMD`,
+ `RUN_COMMAND_STDOUT_TO_STDERR`, or `RUN_SILENT_EXEC_FAILURE`
+ that correspond to the members .no_stdin, .git_cmd,
+ .stdout_to_stderr, .silent_exec_failure of `struct child_process`.
The argument dir corresponds the member .dir. The argument env
corresponds to the member .env.
+The functions above do the following:
+
+. If a system call failed, errno is set and -1 is returned. A diagnostic
+ is printed.
+
+. If the program was not found, then -1 is returned and errno is set to
+ ENOENT; a diagnostic is printed only if .silent_exec_failure is 0.
+
+. Otherwise, the program is run. If it terminates regularly, its exit
+ code is returned. No diagnistic is printed, even if the exit code is
+ non-zero.
+
+. If the program terminated due to a signal, then the return value is the
+ signal number - 128, ie. it is negative and so indicates an unusual
+ condition; a diagnostic is printed. This return value can be passed to
+ exit(2), which will report the same code to the parent process that a
+ POSIX shell's $? would report for a program that died from the signal.
+
+
`start_async`::
Run a function asynchronously. Takes a pointer to a `struct
To specify a new initial working directory for the sub-process,
specify it in the .dir member.
+If the program cannot be found, the functions return -1 and set
+errno to ENOENT. Normally, an error message is printed, but if
+.silent_exec_failure is set to 1, no message is printed for this
+special error condition.
+
* `struct async`
tree walking API
================
-Talk about <tree-walk.h>, things like
+The tree walking API is used to traverse and inspect trees.
-* struct tree_desc
-* init_tree_desc
-* tree_entry_extract
-* update_tree_entry
-* get_tree_entry
+Data Structures
+---------------
-(JC, Linus)
+`struct name_entry`::
+
+ An entry in a tree. Each entry has a sha1 identifier, pathname, and
+ mode.
+
+`struct tree_desc`::
+
+ A semi-opaque data structure used to maintain the current state of the
+ walk.
++
+* `buffer` is a pointer into the memory representation of the tree. It always
+points at the current entry being visited.
+
+* `size` counts the number of bytes left in the `buffer`.
+
+* `entry` points to the current entry being visited.
+
+`struct traverse_info`::
+
+ A structure used to maintain the state of a traversal.
++
+* `prev` points to the traverse_info which was used to descend into the
+current tree. If this is the top-level tree `prev` will point to
+a dummy traverse_info.
+
+* `name` is the entry for the current tree (if the tree is a subtree).
+
+* `pathlen` is the length of the full path for the current tree.
+
+* `conflicts` can be used by callbacks to maintain directory-file conflicts.
+
+* `fn` is a callback called for each entry in the tree. See Traversing for more
+information.
+
+* `data` can be anything the `fn` callback would want to use.
+
+Initializing
+------------
+
+`init_tree_desc`::
+
+ Initialize a `tree_desc` and decode its first entry. The buffer and
+ size parameters are assumed to be the same as the buffer and size
+ members of `struct tree`.
+
+`fill_tree_descriptor`::
+
+ Initialize a `tree_desc` and decode its first entry given the sha1 of
+ a tree. Returns the `buffer` member if the sha1 is a valid tree
+ identifier and NULL otherwise.
+
+`setup_traverse_info`::
+
+ Initialize a `traverse_info` given the pathname of the tree to start
+ traversing from. The `base` argument is assumed to be the `path`
+ member of the `name_entry` being recursed into unless the tree is a
+ top-level tree in which case the empty string ("") is used.
+
+Walking
+-------
+
+`tree_entry`::
+
+ Visit the next entry in a tree. Returns 1 when there are more entries
+ left to visit and 0 when all entries have been visited. This is
+ commonly used in the test of a while loop.
+
+`tree_entry_len`::
+
+ Calculate the length of a tree entry's pathname. This utilizes the
+ memory structure of a tree entry to avoid the overhead of using a
+ generic strlen().
+
+`update_tree_entry`::
+
+ Walk to the next entry in a tree. This is commonly used in conjunction
+ with `tree_entry_extract` to inspect the current entry.
+
+`tree_entry_extract`::
+
+ Decode the entry currently being visited (the one pointed to by
+ `tree_desc's` `entry` member) and return the sha1 of the entry. The
+ `pathp` and `modep` arguments are set to the entry's pathname and mode
+ respectively.
+
+`get_tree_entry`::
+
+ Find an entry in a tree given a pathname and the sha1 of a tree to
+ search. Returns 0 if the entry is found and -1 otherwise. The third
+ and fourth parameters are set to the entry's sha1 and mode
+ respectively.
+
+Traversing
+----------
+
+`traverse_trees`::
+
+ Traverse `n` number of trees in parallel. The `fn` callback member of
+ `traverse_info` is called once for each tree entry.
+
+`traverse_callback_t`::
+ The arguments passed to the traverse callback are as follows:
++
+* `n` counts the number of trees being traversed.
+
+* `mask` has its nth bit set if something exists in the nth entry.
+
+* `dirmask` has its nth bit set if the nth tree's entry is a directory.
+
+* `entry` is an array of size `n` where the nth entry is from the nth tree.
+
+* `info` maintains the state of the traversal.
+
++
+Returning a negative value will terminate the traversal. Otherwise the
+return value is treated as an update mask. If the nth bit is set the nth tree
+will be updated and if the bit is not set the nth tree entry will be the
+same in the next callback invocation.
+
+`make_traverse_path`::
+
+ Generate the full pathname of a tree entry based from the root of the
+ traversal. For example, if the traversal has recursed into another
+ tree named "bar" the pathname of an entry "baz" in the "bar"
+ tree would be "bar/baz".
+
+`traverse_path_len`::
+
+ Calculate the length of a pathname returned by `make_traverse_path`.
+ This utilizes the memory structure of a tree entry to avoid the
+ overhead of using a generic strlen().
+
+Authors
+-------
+
+Written by Junio C Hamano <gitster@pobox.com> and Linus Torvalds
+<torvalds@linux-foundation.org>
#!/bin/sh
GVF=GIT-VERSION-FILE
-DEF_VER=v1.6.4
+DEF_VER=v1.6.4.GIT
LF='
'
# specify your own (or DarwinPort's) include directories and
# library directories by defining CFLAGS and LDFLAGS appropriately.
#
+# Define BLK_SHA1 environment variable if you want the C version
+# of the SHA1 that assumes you can do unaligned 32-bit loads and
+# have a fast htonl() function.
+#
# Define PPC_SHA1 environment variable when running make to make use of
# a bundled SHA1 routine optimized for PowerPC.
#
BASIC_CFLAGS += -DNO_DEFLATE_BOUND
endif
+ifdef BLK_SHA1
+ SHA1_HEADER = "block-sha1/sha1.h"
+ LIB_OBJS += block-sha1/sha1.o
+else
ifdef PPC_SHA1
SHA1_HEADER = "ppc/sha1.h"
LIB_OBJS += ppc/sha1.o ppc/sha1ppc.o
endif
endif
endif
+endif
ifdef NO_PERL_MAKEMAKER
export NO_PERL_MAKEMAKER
endif
-Documentation/RelNotes-1.6.4.txt
\ No newline at end of file
+Documentation/RelNotes-1.6.5.txt
\ No newline at end of file
--- /dev/null
+/*
+ * Based on the Mozilla SHA1 (see mozilla-sha1/sha1.c),
+ * optimized to do word accesses rather than byte accesses,
+ * and to avoid unnecessary copies into the context array.
+ */
+
+#include <string.h>
+#include <arpa/inet.h>
+
+#include "sha1.h"
+
+#if defined(__i386__) || defined(__x86_64__)
+
+/*
+ * Force usage of rol or ror by selecting the one with the smaller constant.
+ * It _can_ generate slightly smaller code (a constant of 1 is special), but
+ * perhaps more importantly it's possibly faster on any uarch that does a
+ * rotate with a loop.
+ */
+
+#define SHA_ASM(op, x, n) ({ unsigned int __res; __asm__(op " %1,%0":"=r" (__res):"i" (n), "0" (x)); __res; })
+#define SHA_ROL(x,n) SHA_ASM("rol", x, n)
+#define SHA_ROR(x,n) SHA_ASM("ror", x, n)
+
+#else
+
+#define SHA_ROT(X,l,r) (((X) << (l)) | ((X) >> (r)))
+#define SHA_ROL(X,n) SHA_ROT(X,n,32-(n))
+#define SHA_ROR(X,n) SHA_ROT(X,32-(n),n)
+
+#endif
+
+/*
+ * If you have 32 registers or more, the compiler can (and should)
+ * try to change the array[] accesses into registers. However, on
+ * machines with less than ~25 registers, that won't really work,
+ * and at least gcc will make an unholy mess of it.
+ *
+ * So to avoid that mess which just slows things down, we force
+ * the stores to memory to actually happen (we might be better off
+ * with a 'W(t)=(val);asm("":"+m" (W(t))' there instead, as
+ * suggested by Artur Skawina - that will also make gcc unable to
+ * try to do the silly "optimize away loads" part because it won't
+ * see what the value will be).
+ *
+ * Ben Herrenschmidt reports that on PPC, the C version comes close
+ * to the optimized asm with this (ie on PPC you don't want that
+ * 'volatile', since there are lots of registers).
+ *
+ * On ARM we get the best code generation by forcing a full memory barrier
+ * between each SHA_ROUND, otherwise gcc happily get wild with spilling and
+ * the stack frame size simply explode and performance goes down the drain.
+ */
+
+#if defined(__i386__) || defined(__x86_64__)
+ #define setW(x, val) (*(volatile unsigned int *)&W(x) = (val))
+#elif defined(__arm__)
+ #define setW(x, val) do { W(x) = (val); __asm__("":::"memory"); } while (0)
+#else
+ #define setW(x, val) (W(x) = (val))
+#endif
+
+/*
+ * Performance might be improved if the CPU architecture is OK with
+ * unaligned 32-bit loads and a fast ntohl() is available.
+ * Otherwise fall back to byte loads and shifts which is portable,
+ * and is faster on architectures with memory alignment issues.
+ */
+
+#if defined(__i386__) || defined(__x86_64__) || \
+ defined(__ppc__) || defined(__ppc64__) || \
+ defined(__powerpc__) || defined(__powerpc64__) || \
+ defined(__s390__) || defined(__s390x__)
+
+#define get_be32(p) ntohl(*(unsigned int *)(p))
+#define put_be32(p, v) do { *(unsigned int *)(p) = htonl(v); } while (0)
+
+#else
+
+#define get_be32(p) ( \
+ (*((unsigned char *)(p) + 0) << 24) | \
+ (*((unsigned char *)(p) + 1) << 16) | \
+ (*((unsigned char *)(p) + 2) << 8) | \
+ (*((unsigned char *)(p) + 3) << 0) )
+#define put_be32(p, v) do { \
+ unsigned int __v = (v); \
+ *((unsigned char *)(p) + 0) = __v >> 24; \
+ *((unsigned char *)(p) + 1) = __v >> 16; \
+ *((unsigned char *)(p) + 2) = __v >> 8; \
+ *((unsigned char *)(p) + 3) = __v >> 0; } while (0)
+
+#endif
+
+/* This "rolls" over the 512-bit array */
+#define W(x) (array[(x)&15])
+
+/*
+ * Where do we get the source from? The first 16 iterations get it from
+ * the input data, the next mix it from the 512-bit array.
+ */
+#define SHA_SRC(t) get_be32(data + t)
+#define SHA_MIX(t) SHA_ROL(W(t+13) ^ W(t+8) ^ W(t+2) ^ W(t), 1)
+
+#define SHA_ROUND(t, input, fn, constant, A, B, C, D, E) do { \
+ unsigned int TEMP = input(t); setW(t, TEMP); \
+ E += TEMP + SHA_ROL(A,5) + (fn) + (constant); \
+ B = SHA_ROR(B, 2); } while (0)
+
+#define T_0_15(t, A, B, C, D, E) SHA_ROUND(t, SHA_SRC, (((C^D)&B)^D) , 0x5a827999, A, B, C, D, E )
+#define T_16_19(t, A, B, C, D, E) SHA_ROUND(t, SHA_MIX, (((C^D)&B)^D) , 0x5a827999, A, B, C, D, E )
+#define T_20_39(t, A, B, C, D, E) SHA_ROUND(t, SHA_MIX, (B^C^D) , 0x6ed9eba1, A, B, C, D, E )
+#define T_40_59(t, A, B, C, D, E) SHA_ROUND(t, SHA_MIX, ((B&C)+(D&(B^C))) , 0x8f1bbcdc, A, B, C, D, E )
+#define T_60_79(t, A, B, C, D, E) SHA_ROUND(t, SHA_MIX, (B^C^D) , 0xca62c1d6, A, B, C, D, E )
+
+static void blk_SHA1_Block(blk_SHA_CTX *ctx, const unsigned int *data)
+{
+ unsigned int A,B,C,D,E;
+ unsigned int array[16];
+
+ A = ctx->H[0];
+ B = ctx->H[1];
+ C = ctx->H[2];
+ D = ctx->H[3];
+ E = ctx->H[4];
+
+ /* Round 1 - iterations 0-16 take their input from 'data' */
+ T_0_15( 0, A, B, C, D, E);
+ T_0_15( 1, E, A, B, C, D);
+ T_0_15( 2, D, E, A, B, C);
+ T_0_15( 3, C, D, E, A, B);
+ T_0_15( 4, B, C, D, E, A);
+ T_0_15( 5, A, B, C, D, E);
+ T_0_15( 6, E, A, B, C, D);
+ T_0_15( 7, D, E, A, B, C);
+ T_0_15( 8, C, D, E, A, B);
+ T_0_15( 9, B, C, D, E, A);
+ T_0_15(10, A, B, C, D, E);
+ T_0_15(11, E, A, B, C, D);
+ T_0_15(12, D, E, A, B, C);
+ T_0_15(13, C, D, E, A, B);
+ T_0_15(14, B, C, D, E, A);
+ T_0_15(15, A, B, C, D, E);
+
+ /* Round 1 - tail. Input from 512-bit mixing array */
+ T_16_19(16, E, A, B, C, D);
+ T_16_19(17, D, E, A, B, C);
+ T_16_19(18, C, D, E, A, B);
+ T_16_19(19, B, C, D, E, A);
+
+ /* Round 2 */
+ T_20_39(20, A, B, C, D, E);
+ T_20_39(21, E, A, B, C, D);
+ T_20_39(22, D, E, A, B, C);
+ T_20_39(23, C, D, E, A, B);
+ T_20_39(24, B, C, D, E, A);
+ T_20_39(25, A, B, C, D, E);
+ T_20_39(26, E, A, B, C, D);
+ T_20_39(27, D, E, A, B, C);
+ T_20_39(28, C, D, E, A, B);
+ T_20_39(29, B, C, D, E, A);
+ T_20_39(30, A, B, C, D, E);
+ T_20_39(31, E, A, B, C, D);
+ T_20_39(32, D, E, A, B, C);
+ T_20_39(33, C, D, E, A, B);
+ T_20_39(34, B, C, D, E, A);
+ T_20_39(35, A, B, C, D, E);
+ T_20_39(36, E, A, B, C, D);
+ T_20_39(37, D, E, A, B, C);
+ T_20_39(38, C, D, E, A, B);
+ T_20_39(39, B, C, D, E, A);
+
+ /* Round 3 */
+ T_40_59(40, A, B, C, D, E);
+ T_40_59(41, E, A, B, C, D);
+ T_40_59(42, D, E, A, B, C);
+ T_40_59(43, C, D, E, A, B);
+ T_40_59(44, B, C, D, E, A);
+ T_40_59(45, A, B, C, D, E);
+ T_40_59(46, E, A, B, C, D);
+ T_40_59(47, D, E, A, B, C);
+ T_40_59(48, C, D, E, A, B);
+ T_40_59(49, B, C, D, E, A);
+ T_40_59(50, A, B, C, D, E);
+ T_40_59(51, E, A, B, C, D);
+ T_40_59(52, D, E, A, B, C);
+ T_40_59(53, C, D, E, A, B);
+ T_40_59(54, B, C, D, E, A);
+ T_40_59(55, A, B, C, D, E);
+ T_40_59(56, E, A, B, C, D);
+ T_40_59(57, D, E, A, B, C);
+ T_40_59(58, C, D, E, A, B);
+ T_40_59(59, B, C, D, E, A);
+
+ /* Round 4 */
+ T_60_79(60, A, B, C, D, E);
+ T_60_79(61, E, A, B, C, D);
+ T_60_79(62, D, E, A, B, C);
+ T_60_79(63, C, D, E, A, B);
+ T_60_79(64, B, C, D, E, A);
+ T_60_79(65, A, B, C, D, E);
+ T_60_79(66, E, A, B, C, D);
+ T_60_79(67, D, E, A, B, C);
+ T_60_79(68, C, D, E, A, B);
+ T_60_79(69, B, C, D, E, A);
+ T_60_79(70, A, B, C, D, E);
+ T_60_79(71, E, A, B, C, D);
+ T_60_79(72, D, E, A, B, C);
+ T_60_79(73, C, D, E, A, B);
+ T_60_79(74, B, C, D, E, A);
+ T_60_79(75, A, B, C, D, E);
+ T_60_79(76, E, A, B, C, D);
+ T_60_79(77, D, E, A, B, C);
+ T_60_79(78, C, D, E, A, B);
+ T_60_79(79, B, C, D, E, A);
+
+ ctx->H[0] += A;
+ ctx->H[1] += B;
+ ctx->H[2] += C;
+ ctx->H[3] += D;
+ ctx->H[4] += E;
+}
+
+void blk_SHA1_Init(blk_SHA_CTX *ctx)
+{
+ ctx->size = 0;
+
+ /* Initialize H with the magic constants (see FIPS180 for constants) */
+ ctx->H[0] = 0x67452301;
+ ctx->H[1] = 0xefcdab89;
+ ctx->H[2] = 0x98badcfe;
+ ctx->H[3] = 0x10325476;
+ ctx->H[4] = 0xc3d2e1f0;
+}
+
+void blk_SHA1_Update(blk_SHA_CTX *ctx, const void *data, unsigned long len)
+{
+ int lenW = ctx->size & 63;
+
+ ctx->size += len;
+
+ /* Read the data into W and process blocks as they get full */
+ if (lenW) {
+ int left = 64 - lenW;
+ if (len < left)
+ left = len;
+ memcpy(lenW + (char *)ctx->W, data, left);
+ lenW = (lenW + left) & 63;
+ len -= left;
+ data = ((const char *)data + left);
+ if (lenW)
+ return;
+ blk_SHA1_Block(ctx, ctx->W);
+ }
+ while (len >= 64) {
+ blk_SHA1_Block(ctx, data);
+ data = ((const char *)data + 64);
+ len -= 64;
+ }
+ if (len)
+ memcpy(ctx->W, data, len);
+}
+
+void blk_SHA1_Final(unsigned char hashout[20], blk_SHA_CTX *ctx)
+{
+ static const unsigned char pad[64] = { 0x80 };
+ unsigned int padlen[2];
+ int i;
+
+ /* Pad with a binary 1 (ie 0x80), then zeroes, then length */
+ padlen[0] = htonl(ctx->size >> 29);
+ padlen[1] = htonl(ctx->size << 3);
+
+ i = ctx->size & 63;
+ blk_SHA1_Update(ctx, pad, 1+ (63 & (55 - i)));
+ blk_SHA1_Update(ctx, padlen, 8);
+
+ /* Output hash */
+ for (i = 0; i < 5; i++)
+ put_be32(hashout + i*4, ctx->H[i]);
+}
--- /dev/null
+/*
+ * Based on the Mozilla SHA1 (see mozilla-sha1/sha1.h),
+ * optimized to do word accesses rather than byte accesses,
+ * and to avoid unnecessary copies into the context array.
+ */
+
+typedef struct {
+ unsigned int H[5];
+ unsigned int W[16];
+ unsigned long long size;
+} blk_SHA_CTX;
+
+void blk_SHA1_Init(blk_SHA_CTX *ctx);
+void blk_SHA1_Update(blk_SHA_CTX *ctx, const void *dataIn, unsigned long len);
+void blk_SHA1_Final(unsigned char hashout[20], blk_SHA_CTX *ctx);
+
+#define git_SHA_CTX blk_SHA_CTX
+#define git_SHA1_Init blk_SHA1_Init
+#define git_SHA1_Update blk_SHA1_Update
+#define git_SHA1_Final blk_SHA1_Final
return val;
}
+/*
+ * Does the ---/+++ line has the POSIX timestamp after the last HT?
+ * GNU diff puts epoch there to signal a creation/deletion event. Is
+ * this such a timestamp?
+ */
+static int has_epoch_timestamp(const char *nameline)
+{
+ /*
+ * We are only interested in epoch timestamp; any non-zero
+ * fraction cannot be one, hence "(\.0+)?" in the regexp below.
+ * For the same reason, the date must be either 1969-12-31 or
+ * 1970-01-01, and the seconds part must be "00".
+ */
+ const char stamp_regexp[] =
+ "^(1969-12-31|1970-01-01)"
+ " "
+ "[0-2][0-9]:[0-5][0-9]:00(\\.0+)?"
+ " "
+ "([-+][0-2][0-9][0-5][0-9])\n";
+ const char *timestamp = NULL, *cp;
+ static regex_t *stamp;
+ regmatch_t m[10];
+ int zoneoffset;
+ int hourminute;
+ int status;
+
+ for (cp = nameline; *cp != '\n'; cp++) {
+ if (*cp == '\t')
+ timestamp = cp + 1;
+ }
+ if (!timestamp)
+ return 0;
+ if (!stamp) {
+ stamp = xmalloc(sizeof(*stamp));
+ if (regcomp(stamp, stamp_regexp, REG_EXTENDED)) {
+ warning("Cannot prepare timestamp regexp %s",
+ stamp_regexp);
+ return 0;
+ }
+ }
+
+ status = regexec(stamp, timestamp, ARRAY_SIZE(m), m, 0);
+ if (status) {
+ if (status != REG_NOMATCH)
+ warning("regexec returned %d for input: %s",
+ status, timestamp);
+ return 0;
+ }
+
+ zoneoffset = strtol(timestamp + m[3].rm_so + 1, NULL, 10);
+ zoneoffset = (zoneoffset / 100) * 60 + (zoneoffset % 100);
+ if (timestamp[m[3].rm_so] == '-')
+ zoneoffset = -zoneoffset;
+
+ /*
+ * YYYY-MM-DD hh:mm:ss must be from either 1969-12-31
+ * (west of GMT) or 1970-01-01 (east of GMT)
+ */
+ if ((zoneoffset < 0 && memcmp(timestamp, "1969-12-31", 10)) ||
+ (0 <= zoneoffset && memcmp(timestamp, "1970-01-01", 10)))
+ return 0;
+
+ hourminute = (strtol(timestamp + 11, NULL, 10) * 60 +
+ strtol(timestamp + 14, NULL, 10) -
+ zoneoffset);
+
+ return ((zoneoffset < 0 && hourminute == 1440) ||
+ (0 <= zoneoffset && !hourminute));
+}
+
/*
* Get the name etc info from the ---/+++ lines of a traditional patch header
*
} else {
name = find_name(first, NULL, p_value, TERM_SPACE | TERM_TAB);
name = find_name(second, name, p_value, TERM_SPACE | TERM_TAB);
- patch->old_name = patch->new_name = name;
+ if (has_epoch_timestamp(first)) {
+ patch->is_new = 1;
+ patch->is_delete = 0;
+ patch->new_name = name;
+ } else if (has_epoch_timestamp(second)) {
+ patch->is_new = 0;
+ patch->is_delete = 1;
+ patch->old_name = name;
+ } else {
+ patch->old_name = patch->new_name = name;
+ }
}
if (!name)
die("unable to find filename in patch at line %d", linenr);
int i;
int show_only = 0, remove_directories = 0, quiet = 0, ignored = 0;
int ignored_only = 0, baselen = 0, config_set = 0, errors = 0;
+ int rm_flags = REMOVE_DIR_KEEP_NESTED_GIT;
struct strbuf directory = STRBUF_INIT;
struct dir_struct dir;
static const char **pathspec;
die("clean.requireForce%s set and -n or -f not given; "
"refusing to clean", config_set ? "" : " not");
+ if (force > 1)
+ rm_flags = 0;
+
dir.flags |= DIR_SHOW_OTHER_DIRECTORIES;
if (!ignored)
(matches == MATCHED_EXACTLY)) {
if (!quiet)
printf("Removing %s\n", qname);
- if (remove_dir_recursively(&directory, 0) != 0) {
+ if (remove_dir_recursively(&directory,
+ rm_flags) != 0) {
warning("failed to remove '%s'", qname);
errors++;
}
static int longformat;
static int abbrev = DEFAULT_ABBREV;
static int max_candidates = 10;
+static int found_names;
static const char *pattern;
static int always;
memcpy(e->path, path, len);
commit->util = e;
}
+ found_names = 1;
}
static int get_name(const char *path, const unsigned char *sha1, int flag, void *cb_data)
for_each_ref(get_name, NULL);
}
+ if (!found_names)
+ die("cannot describe '%s'", sha1_to_hex(sha1));
+
n = cmit->util;
if (n) {
/*
revs->max_count = 3;
else if (!strcmp(argv[1], "-q"))
options |= DIFF_SILENT_ON_REMOVED;
+ else if (!strcmp(argv[1], "-h"))
+ usage(builtin_diff_usage);
else
return error("invalid option: %s", argv[1]);
argv++; argc--;
static enum { ABORT, VERBATIM, WARN, STRIP } signed_tag_mode = ABORT;
static enum { ERROR, DROP, REWRITE } tag_of_filtered_mode = ABORT;
static int fake_missing_tagger;
+static int no_data;
static int parse_opt_signed_tag_mode(const struct option *opt,
const char *arg, int unset)
char *buf;
struct object *object;
+ if (no_data)
+ return;
+
if (is_null_sha1(sha1))
return;
* Links refer to objects in another repositories;
* output the SHA-1 verbatim.
*/
- if (S_ISGITLINK(spec->mode))
+ if (no_data || S_ISGITLINK(spec->mode))
printf("M %06o %s %s\n", spec->mode,
sha1_to_hex(spec->sha1), spec->path);
else {
"Import marks from this file"),
OPT_BOOLEAN(0, "fake-missing-tagger", &fake_missing_tagger,
"Fake a tagger when tags lack one"),
+ { OPTION_NEGBIT, 0, "data", &no_data, NULL,
+ "Skip output of blob data",
+ PARSE_OPT_NOARG | PARSE_OPT_NEGHELP, NULL, 1 },
OPT_END()
};
return git_color_default_config(var, value, cb);
}
+/*
+ * Return non-zero if max_depth is negative or path has no more then max_depth
+ * slashes.
+ */
+static int accept_subdir(const char *path, int max_depth)
+{
+ if (max_depth < 0)
+ return 1;
+
+ while ((path = strchr(path, '/')) != NULL) {
+ max_depth--;
+ if (max_depth < 0)
+ return 0;
+ path++;
+ }
+ return 1;
+}
+
+/*
+ * Return non-zero if name is a subdirectory of match and is not too deep.
+ */
+static int is_subdir(const char *name, int namelen,
+ const char *match, int matchlen, int max_depth)
+{
+ if (matchlen > namelen || strncmp(name, match, matchlen))
+ return 0;
+
+ if (name[matchlen] == '\0') /* exact match */
+ return 1;
+
+ if (!matchlen || match[matchlen-1] == '/' || name[matchlen] == '/')
+ return accept_subdir(name + matchlen + 1, max_depth);
+
+ return 0;
+}
+
/*
* git grep pathspecs are somewhat different from diff-tree pathspecs;
* pathname wildcards are allowed.
*/
-static int pathspec_matches(const char **paths, const char *name)
+static int pathspec_matches(const char **paths, const char *name, int max_depth)
{
int namelen, i;
if (!paths || !*paths)
- return 1;
+ return accept_subdir(name, max_depth);
namelen = strlen(name);
for (i = 0; paths[i]; i++) {
const char *match = paths[i];
int matchlen = strlen(match);
const char *cp, *meta;
- if (!matchlen ||
- ((matchlen <= namelen) &&
- !strncmp(name, match, matchlen) &&
- (match[matchlen-1] == '/' ||
- name[matchlen] == '\0' || name[matchlen] == '/')))
+ if (is_subdir(name, namelen, match, matchlen, max_depth))
return 1;
if (!fnmatch(match, name, 0))
return 1;
int kept;
if (!S_ISREG(ce->ce_mode))
continue;
- if (!pathspec_matches(paths, ce->name))
+ if (!pathspec_matches(paths, ce->name, opt->max_depth))
continue;
name = ce->name;
if (name[0] == '-') {
struct cache_entry *ce = active_cache[nr];
if (!S_ISREG(ce->ce_mode))
continue;
- if (!pathspec_matches(paths, ce->name))
+ if (!pathspec_matches(paths, ce->name, opt->max_depth))
continue;
/*
* If CE_VALID is on, we assume worktree file and its cache entry
strbuf_addch(&pathbuf, '/');
down = pathbuf.buf + tn_len;
- if (!pathspec_matches(paths, down))
+ if (!pathspec_matches(paths, down, opt->max_depth))
;
else if (S_ISREG(entry.mode))
hit |= grep_sha1(opt, entry.sha1, pathbuf.buf, tn_len);
OPT_SET_INT('I', NULL, &opt.binary,
"don't match patterns in binary files",
GREP_BINARY_NOMATCH),
+ { OPTION_INTEGER, 0, "max-depth", &opt.max_depth, "depth",
+ "descend at most <depth> levels", PARSE_OPT_NONEG,
+ NULL, 1 },
OPT_GROUP(""),
OPT_BIT('E', "extended-regexp", &opt.regflags,
"use extended POSIX regular expressions", REG_EXTENDED),
opt.pathname = 1;
opt.pattern_tail = &opt.pattern_list;
opt.regflags = REG_NEWLINE;
+ opt.max_depth = -1;
strcpy(opt.color_match, GIT_COLOR_RED GIT_COLOR_BOLD);
opt.color = -1;
#include "cache.h"
#include "builtin.h"
#include "exec_cmd.h"
+#include "parse-options.h"
#ifndef DEFAULT_GIT_TEMPLATE_DIR
#define DEFAULT_GIT_TEMPLATE_DIR "/usr/share/git-core/templates"
return 1;
}
-static const char init_db_usage[] =
-"git init [-q | --quiet] [--bare] [--template=<template-directory>] [--shared[=<permissions>]]";
+static int shared_callback(const struct option *opt, const char *arg, int unset)
+{
+ *((int *) opt->value) = (arg) ? git_config_perm("arg", arg) : PERM_GROUP;
+ return 0;
+}
+
+static const char *const init_db_usage[] = {
+ "git init [-q | --quiet] [--bare] [--template=<template-directory>] [--shared[=<permissions>]] [directory]",
+ NULL
+};
/*
* If you want to, you can share the DB area with any number of branches.
const char *git_dir;
const char *template_dir = NULL;
unsigned int flags = 0;
- int i;
-
- for (i = 1; i < argc; i++, argv++) {
- const char *arg = argv[1];
- if (!prefixcmp(arg, "--template="))
- template_dir = arg+11;
- else if (!strcmp(arg, "--bare")) {
- static char git_dir[PATH_MAX+1];
- is_bare_repository_cfg = 1;
- setenv(GIT_DIR_ENVIRONMENT, getcwd(git_dir,
- sizeof(git_dir)), 0);
- } else if (!strcmp(arg, "--shared"))
- init_shared_repository = PERM_GROUP;
- else if (!prefixcmp(arg, "--shared="))
- init_shared_repository = git_config_perm("arg", arg+9);
- else if (!strcmp(arg, "-q") || !strcmp(arg, "--quiet"))
- flags |= INIT_DB_QUIET;
- else
- usage(init_db_usage);
+ const struct option init_db_options[] = {
+ OPT_STRING(0, "template", &template_dir, "template-directory",
+ "provide the directory from which templates will be used"),
+ OPT_SET_INT(0, "bare", &is_bare_repository_cfg,
+ "create a bare repository", 1),
+ { OPTION_CALLBACK, 0, "shared", &init_shared_repository,
+ "permissions",
+ "specify that the git repository is to be shared amongst several users",
+ PARSE_OPT_OPTARG | PARSE_OPT_NONEG, shared_callback, 0},
+ OPT_BIT('q', "quiet", &flags, "be quiet", INIT_DB_QUIET),
+ OPT_END()
+ };
+
+ argc = parse_options(argc, argv, prefix, init_db_options, init_db_usage, 0);
+
+ if (argc == 1) {
+ int mkdir_tried = 0;
+ retry:
+ if (chdir(argv[0]) < 0) {
+ if (!mkdir_tried) {
+ int saved;
+ /*
+ * At this point we haven't read any configuration,
+ * and we know shared_repository should always be 0;
+ * but just in case we play safe.
+ */
+ saved = shared_repository;
+ shared_repository = 0;
+ switch (safe_create_leading_directories_const(argv[0])) {
+ case -3:
+ errno = EEXIST;
+ /* fallthru */
+ case -1:
+ die_errno("cannot mkdir %s", argv[0]);
+ break;
+ default:
+ break;
+ }
+ shared_repository = saved;
+ if (mkdir(argv[0], 0777) < 0)
+ die_errno("cannot mkdir %s", argv[0]);
+ mkdir_tried = 1;
+ goto retry;
+ }
+ die_errno("cannot chdir to %s", argv[0]);
+ }
+ } else if (0 < argc) {
+ usage(init_db_usage[0]);
+ }
+ if (is_bare_repository_cfg == 1) {
+ static char git_dir[PATH_MAX+1];
+
+ setenv(GIT_DIR_ENVIRONMENT,
+ getcwd(git_dir, sizeof(git_dir)), 0);
}
if (init_shared_repository != -1)
static const char *fmt_patch_subject_prefix = "PATCH";
static const char *fmt_pretty;
+static const char * const builtin_log_usage =
+ "git log [<options>] [<since>..<until>] [[--] <path>...]\n"
+ " or: git show [options] <object>...";
+
static void cmd_log_init(int argc, const char **argv, const char *prefix,
struct rev_info *rev)
{
rev->show_decorations = 1;
} else if (!strcmp(arg, "--source")) {
rev->show_source = 1;
+ } else if (!strcmp(arg, "-h")) {
+ usage(builtin_log_usage);
} else
die("unrecognized argument: %s", arg);
}
pp_user_info("Tagger", rev->commit_format, &out, buf, rev->date_mode,
git_log_output_encoding ?
git_log_output_encoding: git_commit_encoding);
- printf("%s\n", out.buf);
+ printf("%s", out.buf);
strbuf_release(&out);
}
case OBJ_TAG: {
struct tag *t = (struct tag *)o;
+ if (rev.shown_one)
+ putchar('\n');
printf("%stag %s%s\n",
diff_get_color_opt(&rev.diffopt, DIFF_COMMIT),
t->tag,
diff_get_color_opt(&rev.diffopt, DIFF_RESET));
ret = show_object(o->sha1, 1, &rev);
+ rev.shown_one = 1;
if (ret)
break;
o = parse_object(t->tagged->sha1);
break;
}
case OBJ_TREE:
+ if (rev.shown_one)
+ putchar('\n');
printf("%stree %s%s\n\n",
diff_get_color_opt(&rev.diffopt, DIFF_COMMIT),
name,
diff_get_color_opt(&rev.diffopt, DIFF_RESET));
read_tree_recursive((struct tree *)o, "", 0, 0, NULL,
show_tree_object, NULL);
+ rev.shown_one = 1;
break;
case OBJ_COMMIT:
rev.pending.nr = rev.pending.alloc = 0;
log_write_email_headers(rev, head, &subject_start, &extra_headers,
&need_8bit_cte);
+ for (i = 0; !need_8bit_cte && i < nr; i++)
+ if (has_non_ascii(list[i]->buffer))
+ need_8bit_cte = 1;
+
msg = body;
pp_user_info(NULL, CMIT_FMT_EMAIL, &sb, committer, DATE_RFC2822,
encoding);
}
static const char * const merge_base_usage[] = {
- "git merge-base [--all] <commit-id> <commit-id>...",
+ "git merge-base [-a|--all] <commit> <commit>...",
NULL
};
struct strbuf buf = STRBUF_INIT;
struct strbuf bname = STRBUF_INIT;
const char *ptr;
+ char *found_ref;
int len, early;
strbuf_branchname(&bname, remote);
if (!remote_head)
die("'%s' does not point to a commit", remote);
- strbuf_addstr(&buf, "refs/heads/");
- strbuf_addstr(&buf, remote);
- resolve_ref(buf.buf, branch_head, 0, NULL);
-
- if (!hashcmp(remote_head->sha1, branch_head)) {
- strbuf_addf(msg, "%s\t\tbranch '%s' of .\n",
- sha1_to_hex(branch_head), remote);
- goto cleanup;
+ if (dwim_ref(remote, strlen(remote), branch_head, &found_ref) > 0) {
+ if (!prefixcmp(found_ref, "refs/heads/")) {
+ strbuf_addf(msg, "%s\t\tbranch '%s' of .\n",
+ sha1_to_hex(branch_head), remote);
+ goto cleanup;
+ }
+ if (!prefixcmp(found_ref, "refs/remotes/")) {
+ strbuf_addf(msg, "%s\t\tremote branch '%s' of .\n",
+ sha1_to_hex(branch_head), remote);
+ goto cleanup;
+ }
}
/* See if remote matches <name>^^^.. or <name>~<number> */
discard_cache();
if (read_cache() < 0)
die("failed to read the cache");
- return -ret;
+ return ret;
}
}
static int pack_compression_seen;
static unsigned long delta_cache_size = 0;
-static unsigned long max_delta_cache_size = 0;
+static unsigned long max_delta_cache_size = 256 * 1024 * 1024;
static unsigned long cache_max_small_delta_size = 1000;
static unsigned long window_memory_limit = 0;
#include "builtin.h"
#include "cache.h"
#include "progress.h"
+#include "parse-options.h"
-static const char prune_packed_usage[] =
-"git prune-packed [-n] [-q]";
+static const char * const prune_packed_usage[] = {
+ "git prune-packed [-n|--dry-run] [-q|--quiet]",
+ NULL
+};
#define DRY_RUN 01
#define VERBOSE 02
int cmd_prune_packed(int argc, const char **argv, const char *prefix)
{
- int i;
int opts = VERBOSE;
+ const struct option prune_packed_options[] = {
+ OPT_BIT('n', "dry-run", &opts, "dry run", DRY_RUN),
+ OPT_NEGBIT('q', "quiet", &opts, "be quiet", VERBOSE),
+ OPT_END()
+ };
- for (i = 1; i < argc; i++) {
- const char *arg = argv[i];
+ argc = parse_options(argc, argv, prefix, prune_packed_options,
+ prune_packed_usage, 0);
- if (*arg == '-') {
- if (!strcmp(arg, "-n"))
- opts |= DRY_RUN;
- else if (!strcmp(arg, "-q"))
- opts &= ~VERBOSE;
- else
- usage(prune_packed_usage);
- continue;
- }
- /* Handle arguments here .. */
- usage(prune_packed_usage);
- }
prune_packed_objects(opts);
return 0;
}
const char *repo = NULL; /* default repository */
struct option options[] = {
+ OPT_BIT('q', "quiet", &flags, "be quiet", TRANSPORT_PUSH_QUIET),
OPT_BIT('v', "verbose", &flags, "be verbose", TRANSPORT_PUSH_VERBOSE),
OPT_STRING( 0 , "repo", &repo, "repository", "repository"),
OPT_BIT( 0 , "all", &flags, "push all refs", TRANSPORT_PUSH_ALL),
#include "unpack-trees.h"
#include "dir.h"
#include "builtin.h"
+#include "parse-options.h"
static int nr_trees;
static struct tree *trees[MAX_UNPACK_TREES];
return 0;
}
-static const char read_tree_usage[] = "git read-tree (<sha> | [[-m [--trivial] [--aggressive] | --reset | --prefix=<prefix>] [-u | -i]] [--exclude-per-directory=<gitignore>] [--index-output=<file>] <sha1> [<sha2> [<sha3>]])";
+static const char * const read_tree_usage[] = {
+ "git read-tree [[-m [--trivial] [--aggressive] | --reset | --prefix=<prefix>] [-u [--exclude-per-directory=<gitignore>] | -i]] [--index-output=<file>] <tree-ish1> [<tree-ish2> [<tree-ish3>]]",
+ NULL
+};
+
+static int index_output_cb(const struct option *opt, const char *arg,
+ int unset)
+{
+ set_alternate_index_output(arg);
+ return 0;
+}
+
+static int exclude_per_directory_cb(const struct option *opt, const char *arg,
+ int unset)
+{
+ struct dir_struct *dir;
+ struct unpack_trees_options *opts;
+
+ opts = (struct unpack_trees_options *)opt->value;
+
+ if (opts->dir)
+ die("more than one --exclude-per-directory given.");
+
+ dir = xcalloc(1, sizeof(*opts->dir));
+ dir->flags |= DIR_SHOW_IGNORED;
+ dir->exclude_per_dir = arg;
+ opts->dir = dir;
+ /* We do not need to nor want to do read-directory
+ * here; we are merely interested in reusing the
+ * per directory ignore stack mechanism.
+ */
+ return 0;
+}
static struct lock_file lock_file;
unsigned char sha1[20];
struct tree_desc t[MAX_UNPACK_TREES];
struct unpack_trees_options opts;
+ int prefix_set = 0;
+ const struct option read_tree_options[] = {
+ { OPTION_CALLBACK, 0, "index-output", NULL, "FILE",
+ "write resulting index to <FILE>",
+ PARSE_OPT_NONEG, index_output_cb },
+ OPT__VERBOSE(&opts.verbose_update),
+ OPT_GROUP("Merging"),
+ OPT_SET_INT('m', NULL, &opts.merge,
+ "perform a merge in addition to a read", 1),
+ OPT_SET_INT(0, "trivial", &opts.trivial_merges_only,
+ "3-way merge if no file level merging required", 1),
+ OPT_SET_INT(0, "aggressive", &opts.aggressive,
+ "3-way merge in presence of adds and removes", 1),
+ OPT_SET_INT(0, "reset", &opts.reset,
+ "same as -m, but discard unmerged entries", 1),
+ { OPTION_STRING, 0, "prefix", &opts.prefix, "<subdirectory>/",
+ "read the tree into the index under <subdirectory>/",
+ PARSE_OPT_NONEG | PARSE_OPT_LITERAL_ARGHELP },
+ OPT_SET_INT('u', NULL, &opts.update,
+ "update working tree with merge result", 1),
+ { OPTION_CALLBACK, 0, "exclude-per-directory", &opts,
+ "gitignore",
+ "allow explicitly ignored files to be overwritten",
+ PARSE_OPT_NONEG, exclude_per_directory_cb },
+ OPT_SET_INT('i', NULL, &opts.index_only,
+ "don't check the working tree after merging", 1),
+ OPT_END()
+ };
memset(&opts, 0, sizeof(opts));
opts.head_idx = -1;
newfd = hold_locked_index(&lock_file, 1);
- for (i = 1; i < argc; i++) {
- const char *arg = argv[i];
-
- /* "-u" means "update", meaning that a merge will update
- * the working tree.
- */
- if (!strcmp(arg, "-u")) {
- opts.update = 1;
- continue;
- }
-
- if (!strcmp(arg, "-v")) {
- opts.verbose_update = 1;
- continue;
- }
-
- /* "-i" means "index only", meaning that a merge will
- * not even look at the working tree.
- */
- if (!strcmp(arg, "-i")) {
- opts.index_only = 1;
- continue;
- }
-
- if (!prefixcmp(arg, "--index-output=")) {
- set_alternate_index_output(arg + 15);
- continue;
- }
-
- /* "--prefix=<subdirectory>/" means keep the current index
- * entries and put the entries from the tree under the
- * given subdirectory.
- */
- if (!prefixcmp(arg, "--prefix=")) {
- if (stage || opts.merge || opts.prefix)
- usage(read_tree_usage);
- opts.prefix = arg + 9;
- opts.merge = 1;
- stage = 1;
- if (read_cache_unmerged())
- die("you need to resolve your current index first");
- continue;
- }
-
- /* This differs from "-m" in that we'll silently ignore
- * unmerged entries and overwrite working tree files that
- * correspond to them.
- */
- if (!strcmp(arg, "--reset")) {
- if (stage || opts.merge || opts.prefix)
- usage(read_tree_usage);
- opts.reset = 1;
- opts.merge = 1;
- stage = 1;
- read_cache_unmerged();
- continue;
- }
-
- if (!strcmp(arg, "--trivial")) {
- opts.trivial_merges_only = 1;
- continue;
- }
-
- if (!strcmp(arg, "--aggressive")) {
- opts.aggressive = 1;
- continue;
- }
+ argc = parse_options(argc, argv, unused_prefix, read_tree_options,
+ read_tree_usage, 0);
- /* "-m" stands for "merge", meaning we start in stage 1 */
- if (!strcmp(arg, "-m")) {
- if (stage || opts.merge || opts.prefix)
- usage(read_tree_usage);
- if (read_cache_unmerged())
- die("you need to resolve your current index first");
- stage = 1;
- opts.merge = 1;
- continue;
- }
+ if (read_cache_unmerged() && (opts.prefix || opts.merge))
+ die("You need to resolve your current index first");
- if (!prefixcmp(arg, "--exclude-per-directory=")) {
- struct dir_struct *dir;
-
- if (opts.dir)
- die("more than one --exclude-per-directory are given.");
-
- dir = xcalloc(1, sizeof(*opts.dir));
- dir->flags |= DIR_SHOW_IGNORED;
- dir->exclude_per_dir = arg + 24;
- opts.dir = dir;
- /* We do not need to nor want to do read-directory
- * here; we are merely interested in reusing the
- * per directory ignore stack mechanism.
- */
- continue;
- }
+ prefix_set = opts.prefix ? 1 : 0;
+ if (1 < opts.merge + opts.reset + prefix_set)
+ die("Which one? -m, --reset, or --prefix?");
+ stage = opts.merge = (opts.reset || opts.merge || prefix_set);
- /* using -u and -i at the same time makes no sense */
- if (1 < opts.index_only + opts.update)
- usage(read_tree_usage);
+ for (i = 0; i < argc; i++) {
+ const char *arg = argv[i];
if (get_sha1(arg, sha1))
die("Not a valid object name %s", arg);
die("failed to unpack tree object %s", arg);
stage++;
}
+ if (1 < opts.index_only + opts.update)
+ die("-u and -i at the same time makes no sense");
if ((opts.update||opts.index_only) && !opts.merge)
- usage(read_tree_usage);
+ die("%s is meaningless without -m, --reset, or --prefix",
+ opts.update ? "-u" : "-i");
if ((opts.dir && !opts.update))
die("--exclude-per-directory is meaningless unless -u");
if (opts.merge && !opts.index_only)
static const char pre_receive_hook[] = "hooks/pre-receive";
static const char post_receive_hook[] = "hooks/post-receive";
-static int run_status(int code, const char *cmd_name)
-{
- switch (code) {
- case 0:
- return 0;
- case -ERR_RUN_COMMAND_FORK:
- return error("fork of %s failed", cmd_name);
- case -ERR_RUN_COMMAND_EXEC:
- return error("execute of %s failed", cmd_name);
- case -ERR_RUN_COMMAND_PIPE:
- return error("pipe failed");
- case -ERR_RUN_COMMAND_WAITPID:
- return error("waitpid failed");
- case -ERR_RUN_COMMAND_WAITPID_WRONG_PID:
- return error("waitpid is confused");
- case -ERR_RUN_COMMAND_WAITPID_SIGNAL:
- return error("%s died of signal", cmd_name);
- case -ERR_RUN_COMMAND_WAITPID_NOEXIT:
- return error("%s died strangely", cmd_name);
- default:
- error("%s exited with error code %d", cmd_name, -code);
- return -code;
- }
-}
-
static int run_receive_hook(const char *hook_name)
{
static char buf[sizeof(commands->old_sha1) * 2 + PATH_MAX + 4];
code = start_command(&proc);
if (code)
- return run_status(code, hook_name);
+ return code;
for (cmd = commands; cmd; cmd = cmd->next) {
if (!cmd->error_string) {
size_t n = snprintf(buf, sizeof(buf), "%s %s %s\n",
}
}
close(proc.in);
- return run_status(finish_command(&proc), hook_name);
+ return finish_command(&proc);
}
static int run_update_hook(struct command *cmd)
argv[3] = sha1_to_hex(cmd->new_sha1);
argv[4] = NULL;
- return run_status(run_command_v_opt(argv, RUN_COMMAND_NO_STDIN |
- RUN_COMMAND_STDOUT_TO_STDERR),
- update_hook);
+ return run_command_v_opt(argv, RUN_COMMAND_NO_STDIN |
+ RUN_COMMAND_STDOUT_TO_STDERR);
}
static int is_ref_checked_out(const char *ref)
argv[argc] = NULL;
status = run_command_v_opt(argv, RUN_COMMAND_NO_STDIN
| RUN_COMMAND_STDOUT_TO_STDERR);
- run_status(status, update_post_hook);
}
static void execute_commands(const char *unpacker_error)
code = run_command_v_opt(unpacker, RUN_GIT_CMD);
if (!code)
return NULL;
- run_status(code, unpacker[0]);
return "unpack-objects abnormal exit";
} else {
const char *keeper[7];
ip.git_cmd = 1;
status = start_command(&ip);
if (status) {
- run_status(status, keeper[0]);
return "index-pack fork failed";
}
pack_lockfile = index_pack_lockfile(ip.out);
reprepare_packed_git();
return NULL;
}
- run_status(status, keeper[0]);
return "index-pack abnormal exit";
}
}
NULL,
NULL,
NULL,
+ NULL,
};
struct child_process po;
int i;
argv[i++] = "--thin";
if (args->use_ofs_delta)
argv[i++] = "--delta-base-offset";
+ if (args->quiet)
+ argv[i++] = "-q";
memset(&po, 0, sizeof(po));
po.argv = argv;
po.in = -1;
#include "parse-options.h"
static const char* show_branch_usage[] = {
- "git show-branch [--sparse] [--current] [--all] [--remotes] [--topo-order] [--more=count | --list | --independent | --merge-base] [--topics] [--color] [<refs>...]",
- "--reflog[=n[,b]] [--list] [--color] <branch>",
+ "git show-branch [-a|--all] [-r|--remotes] [--topo-order | --date-order] [--current] [--color | --no-color] [--sparse] [--more=<n> | --list | --independent | --merge-base] [--no-name | --sha1-name] [--topics] [<rev> | <glob>]...",
+ "git show-branch (-g|--reflog)[=<n>[,<base>]] [--list] [<ref>]",
NULL
};
OPT_BOOLEAN(0, "sha1-name", &sha1_name,
"name commits with their object names"),
OPT_BOOLEAN(0, "merge-base", &merge_base,
- "act like git merge-base -a"),
+ "show possible merge bases"),
OPT_BOOLEAN(0, "independent", &independent,
"show refs unreachable from any other ref"),
OPT_BOOLEAN(0, "topo-order", &lifo,
#include "cache.h"
#include "pack.h"
#include "pack-revindex.h"
+#include "parse-options.h"
#define MAX_CHAIN 50
return err;
}
-static const char verify_pack_usage[] = "git verify-pack [-v] <pack>...";
+static const char * const verify_pack_usage[] = {
+ "git verify-pack [-v|--verbose] <pack>...",
+ NULL
+};
int cmd_verify_pack(int argc, const char **argv, const char *prefix)
{
int err = 0;
int verbose = 0;
- int no_more_options = 0;
- int nothing_done = 1;
+ int i;
+ const struct option verify_pack_options[] = {
+ OPT__VERBOSE(&verbose),
+ OPT_END()
+ };
git_config(git_default_config, NULL);
- while (1 < argc) {
- if (!no_more_options && argv[1][0] == '-') {
- if (!strcmp("-v", argv[1]))
- verbose = 1;
- else if (!strcmp("--", argv[1]))
- no_more_options = 1;
- else
- usage(verify_pack_usage);
- }
- else {
- if (verify_one_pack(argv[1], verbose))
- err = 1;
- discard_revindex();
- nothing_done = 0;
- }
- argc--; argv++;
+ argc = parse_options(argc, argv, prefix, verify_pack_options,
+ verify_pack_usage, 0);
+ if (argc < 1)
+ usage_with_options(verify_pack_usage, verify_pack_options);
+ for (i = 0; i < argc; i++) {
+ if (verify_one_pack(argv[i], verbose))
+ err = 1;
+ discard_revindex();
}
- if (nothing_done)
- usage(verify_pack_usage);
-
return err;
}
#include "tag.h"
#include "run-command.h"
#include <signal.h>
+#include "parse-options.h"
-static const char builtin_verify_tag_usage[] =
- "git verify-tag [-v|--verbose] <tag>...";
+static const char * const verify_tag_usage[] = {
+ "git verify-tag [-v|--verbose] <tag>...",
+ NULL
+};
#define PGP_SIGNATURE "-----BEGIN PGP SIGNATURE-----"
int cmd_verify_tag(int argc, const char **argv, const char *prefix)
{
int i = 1, verbose = 0, had_error = 0;
+ const struct option verify_tag_options[] = {
+ OPT__VERBOSE(&verbose),
+ OPT_END()
+ };
git_config(git_default_config, NULL);
- if (argc > 1 &&
- (!strcmp(argv[i], "-v") || !strcmp(argv[i], "--verbose"))) {
- verbose = 1;
- i++;
- }
-
+ argc = parse_options(argc, argv, prefix, verify_tag_options,
+ verify_tag_usage, PARSE_OPT_KEEP_ARGV0);
if (argc <= i)
- usage(builtin_verify_tag_usage);
+ usage_with_options(verify_tag_usage, verify_tag_options);
/* sometimes the program was terminated because this signal
* was received in the process of writing the gpg input: */
#include "cache.h"
#include "tree.h"
#include "cache-tree.h"
+#include "parse-options.h"
-static const char write_tree_usage[] =
-"git write-tree [--missing-ok] [--prefix=<prefix>/]";
+static const char * const write_tree_usage[] = {
+ "git write-tree [--missing-ok] [--prefix=<prefix>/]",
+ NULL
+};
int cmd_write_tree(int argc, const char **argv, const char *unused_prefix)
{
const char *prefix = NULL;
unsigned char sha1[20];
const char *me = "git-write-tree";
+ struct option write_tree_options[] = {
+ OPT_BIT(0, "missing-ok", &flags, "allow missing objects",
+ WRITE_TREE_MISSING_OK),
+ { OPTION_STRING, 0, "prefix", &prefix, "<prefix>/",
+ "write tree object for a subdirectory <prefix>" ,
+ PARSE_OPT_LITERAL_ARGHELP },
+ { OPTION_BIT, 0, "ignore-cache-tree", &flags, NULL,
+ "only useful for debugging",
+ PARSE_OPT_HIDDEN | PARSE_OPT_NOARG, NULL,
+ WRITE_TREE_IGNORE_CACHE_TREE },
+ OPT_END()
+ };
git_config(git_default_config, NULL);
- while (1 < argc) {
- const char *arg = argv[1];
- if (!strcmp(arg, "--missing-ok"))
- flags |= WRITE_TREE_MISSING_OK;
- else if (!prefixcmp(arg, "--prefix="))
- prefix = arg + 9;
- else if (!prefixcmp(arg, "--ignore-cache-tree"))
- /*
- * This is only useful for debugging, so I
- * do not bother documenting it.
- */
- flags |= WRITE_TREE_IGNORE_CACHE_TREE;
- else
- usage(write_tree_usage);
- argc--; argv++;
- }
-
- if (argc > 2)
- die("too many options");
+ argc = parse_options(argc, argv, unused_prefix, write_tree_options,
+ write_tree_usage, 0);
ret = write_cache_as_tree(sha1, flags, prefix);
switch (ret) {
extern int index_path(unsigned char *sha1, const char *path, struct stat *st, int write_object);
extern void fill_stat_cache_info(struct cache_entry *ce, struct stat *st);
+/* "careful lstat()" */
+extern int check_path(const char *path, int len, struct stat *st);
+
#define REFRESH_REALLY 0x0001 /* ignore_valid */
#define REFRESH_UNMERGED 0x0002 /* allow unmerged */
#define REFRESH_QUIET 0x0004 /* be quiet about it */
};
extern int non_ascii(int);
+extern int has_non_ascii(const char *text);
struct rev_info; /* in revision.h, it circularly uses enum cmit_fmt */
extern char *reencode_commit_message(const struct commit *commit,
const char **encoding_p);
#define S_IROTH 0
#define S_IXOTH 0
-#define WIFEXITED(x) ((unsigned)(x) < 259) /* STILL_ACTIVE */
+#define WIFEXITED(x) 1
+#define WIFSIGNALED(x) 0
#define WEXITSTATUS(x) ((x) & 0xff)
-#define WIFSIGNALED(x) ((unsigned)(x) > 259)
+#define WTERMSIG(x) SIGTERM
#define SIGHUP 1
#define SIGQUIT 3
--extended-regexp --basic-regexp --fixed-strings
--files-with-matches --name-only
--files-without-match
+ --max-depth
--count
--and --or --not --all-match
"
(git-get-string-sha1
(git-call-process-string-display-error "write-tree"))))
-(defun git-commit-tree (buffer tree head)
- "Call git-commit-tree with buffer as input and return the resulting commit SHA1."
+(defun git-commit-tree (buffer tree parent)
+ "Create a commit and possibly update HEAD.
+Create a commit with the message in BUFFER using the tree with hash TREE.
+Use PARENT as the parent of the new commit. If PARENT is the current \"HEAD\",
+update the \"HEAD\" reference to the new commit."
(let ((author-name (git-get-committer-name))
(author-email (git-get-committer-email))
(subject "commit (initial): ")
author-date log-start log-end args coding-system-for-write)
- (when head
+ (when parent
(setq subject "commit: ")
(push "-p" args)
- (push head args))
+ (push parent args))
(with-current-buffer buffer
(goto-char (point-min))
(if
(apply #'git-run-command-region
buffer log-start log-end env
"commit-tree" tree (nreverse args))))))
- (when commit (git-update-ref "HEAD" commit head subject))
+ (when commit (git-update-ref "HEAD" commit parent subject))
commit)))
(defun git-empty-db-p ()
status = finish_command(&child_process);
if (status)
- error("external filter %s failed %d", params->cmd, -status);
+ error("external filter %s failed %d", params->cmd, status);
return (write_err || status);
}
return ret;
}
-int remove_dir_recursively(struct strbuf *path, int only_empty)
+int remove_dir_recursively(struct strbuf *path, int flag)
{
- DIR *dir = opendir(path->buf);
+ DIR *dir;
struct dirent *e;
int ret = 0, original_len = path->len, len;
+ int only_empty = (flag & REMOVE_DIR_EMPTY_ONLY);
+ unsigned char submodule_head[20];
+ if ((flag & REMOVE_DIR_KEEP_NESTED_GIT) &&
+ !resolve_gitlink_ref(path->buf, "HEAD", submodule_head))
+ /* Do not descend and nuke a nested git work tree. */
+ return 0;
+
+ dir = opendir(path->buf);
if (!dir)
return -1;
if (path->buf[original_len - 1] != '/')
extern int is_empty_dir(const char *dir);
extern void setup_standard_excludes(struct dir_struct *dir);
-extern int remove_dir_recursively(struct strbuf *path, int only_empty);
+
+#define REMOVE_DIR_EMPTY_ONLY 01
+#define REMOVE_DIR_KEEP_NESTED_GIT 02
+extern int remove_dir_recursively(struct strbuf *path, int flag);
/* tries to remove the path with empty directories along it, ignores ENOENT */
extern int remove_path(const char *path);
return 0;
}
+/*
+ * This is like 'lstat()', except it refuses to follow symlinks
+ * in the path.
+ */
+int check_path(const char *path, int len, struct stat *st)
+{
+ if (has_symlink_leading_path(path, len)) {
+ errno = ENOENT;
+ return -1;
+ }
+ return lstat(path, st);
+}
+
int checkout_entry(struct cache_entry *ce, const struct checkout *state, char *topath)
{
static char path[PATH_MAX + 1];
strcpy(path + len, ce->name);
len += ce_namelen(ce);
- if (!lstat(path, &st)) {
+ if (!check_path(path, len, &st)) {
unsigned changed = ce_match_stat(ce, &st, CE_MATCH_IGNORE_VALID);
if (!changed)
return 0;
esac
;;
esac
+ if test -z "$patch_format" &&
+ test -n "$l1" &&
+ test -n "$l2" &&
+ test -n "$l3"
+ then
+ # This begins with three non-empty lines. Is this a
+ # piece of e-mail a-la RFC2822? Grab all the headers,
+ # discarding the indented remainder of folded lines,
+ # and see if it looks like that they all begin with the
+ # header field names...
+ sed -n -e '/^$/q' -e '/^[ ]/d' -e p "$1" |
+ egrep -v '^[A-Za-z]+(-[A-Za-z]+)*:' >/dev/null ||
+ patch_format=mbox
+ fi
} < "$1" || clean_abort
}
msgnum=
;;
*)
- clean_abort "Patch format $patch_format is not supported."
+ if test -n "$parse_patch" ; then
+ clean_abort "Patch format $patch_format is not supported."
+ else
+ clean_abort "Patch format detection failed."
+ fi
;;
esac
}
}
};
}
- $pass="A" unless $pass;
+
+ $pass = $self->_scramble($pass);
my ($s, $rep);
if ($proxyhost) {
return $res;
}
+sub _scramble {
+ my ($self, $pass) = @_;
+ my $scrambled = "A";
+
+ return $scrambled unless $pass;
+
+ my $pass_len = length($pass);
+ my @pass_arr = split("", $pass);
+ my $i;
+
+ # from cvs/src/scramble.c
+ my @shifts = (
+ 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15,
+ 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31,
+ 114,120, 53, 79, 96,109, 72,108, 70, 64, 76, 67,116, 74, 68, 87,
+ 111, 52, 75,119, 49, 34, 82, 81, 95, 65,112, 86,118,110,122,105,
+ 41, 57, 83, 43, 46,102, 40, 89, 38,103, 45, 50, 42,123, 91, 35,
+ 125, 55, 54, 66,124,126, 59, 47, 92, 71,115, 78, 88,107,106, 56,
+ 36,121,117,104,101,100, 69, 73, 99, 63, 94, 93, 39, 37, 61, 48,
+ 58,113, 32, 90, 44, 98, 60, 51, 33, 97, 62, 77, 84, 80, 85,223,
+ 225,216,187,166,229,189,222,188,141,249,148,200,184,136,248,190,
+ 199,170,181,204,138,232,218,183,255,234,220,247,213,203,226,193,
+ 174,172,228,252,217,201,131,230,197,211,145,238,161,179,160,212,
+ 207,221,254,173,202,146,224,151,140,196,205,130,135,133,143,246,
+ 192,159,244,239,185,168,215,144,139,165,180,157,147,186,214,176,
+ 227,231,219,169,175,156,206,198,129,164,150,210,154,177,134,127,
+ 182,128,158,208,162,132,167,209,149,241,153,251,237,236,171,195,
+ 243,233,253,240,194,250,191,155,142,137,245,235,163,242,178,152
+ );
+
+ for ($i = 0; $i < $pass_len; $i++) {
+ $scrambled .= pack("C", $shifts[ord($pass_arr[$i])]);
+ }
+
+ return $scrambled;
+}
package main;
}
test true = "$rebase" && {
- git update-index --ignore-submodules --refresh &&
- git diff-files --ignore-submodules --quiet &&
- git diff-index --ignore-submodules --cached --quiet HEAD -- ||
- die "refusing to pull with rebase: your working tree is not up-to-date"
-
+ if ! git rev-parse -q --verify HEAD >/dev/null
+ then
+ # On an unborn branch
+ if test -f "$GIT_DIR/index"
+ then
+ die "updating an unborn branch with changes added to the index"
+ fi
+ else
+ git update-index --ignore-submodules --refresh &&
+ git diff-files --ignore-submodules --quiet &&
+ git diff-index --ignore-submodules --cached --quiet HEAD -- ||
+ die "refusing to pull with rebase: your working tree is not up-to-date"
+ fi
+ oldremoteref= &&
. git-parse-remote &&
- reflist="$(get_remote_merge_branch "$@" 2>/dev/null)" &&
- oldremoteref="$(git rev-parse -q --verify \
- "$reflist")"
+ remoteref="$(get_remote_merge_branch "$@" 2>/dev/null)" &&
+ oldremoteref="$(git rev-parse -q --verify "$remoteref")" &&
+ for reflog in $(git rev-list -g $remoteref 2>/dev/null)
+ do
+ if test "$reflog" = "$(git merge-base $reflog $curr_branch)"
+ then
+ oldremoteref="$reflog"
+ break
+ fi
+ done
}
orig_head=$(git rev-parse -q --verify HEAD)
git fetch $verbosity --update-head-ok "$@" || exit 1
fi
# The tree must be really really clean.
-if ! git update-index --ignore-submodules --refresh; then
- die "cannot rebase: you have unstaged changes"
+if ! git update-index --ignore-submodules --refresh > /dev/null; then
+ echo >&2 "cannot rebase: you have unstaged changes"
+ git diff --name-status -r --ignore-submodules -- >&2
+ exit 1
fi
diff=$(git diff-index --cached --name-status -r --ignore-submodules HEAD --)
case "$diff" in
LONG_USAGE='Summarizes the changes between two commits to the standard output,
and includes the given URL in the generated summary.'
SUBDIRECTORY_OK='Yes'
-OPTIONS_SPEC=
+OPTIONS_SPEC='git request-pull [options] start url [end]
+--
+p show patch text as well
+'
+
. git-sh-setup
. git-parse-remote
GIT_PAGER=
export GIT_PAGER
+patch=
+while case "$#" in 0) break ;; esac
+do
+ case "$1" in
+ -p)
+ patch=-p ;;
+ --)
+ shift; break ;;
+ -*)
+ usage ;;
+ *)
+ break ;;
+ esac
+ shift
+done
+
base=$1
url=$2
head=${3-HEAD}
echo
git shortlog ^$baserev $headrev
-git diff -M --stat --summary $merge_base $headrev
+git diff -M --stat --summary $patch $merge_base..$headrev
exit $status
print STDOUT "\n# $path\n";
my $s = $props->{'svn:ignore'} or return;
$s =~ s/[\r\n]+/\n/g;
+ $s =~ s/^\n+//;
chomp $s;
$s =~ s#^#$path#gm;
print STDOUT "$s\n";
open(GITIGNORE, '>', $ignore)
or fatal("Failed to open `$ignore' for writing: $!");
$s =~ s/[\r\n]+/\n/g;
+ $s =~ s/^\n+//;
chomp $s;
# Prefix all patterns so that the ignore doesn't apply
# to sub-directories.
}
do_git_init_db();
if (defined $_trunk) {
- my $trunk_ref = $_prefix . 'trunk';
+ my $trunk_ref = 'refs/remotes/' . $_prefix . 'trunk';
# try both old-style and new-style lookups:
my $gs_trunk = eval { Git::SVN->new($trunk_ref) };
unless ($gs_trunk) {
my $gs = $Git::SVN::_head or return;
return if verify_ref('refs/heads/master^0');
+ # look for "trunk" ref if it exists
+ my $remote = Git::SVN::read_all_remotes()->{$gs->{repo_id}};
+ my $fetch = $remote->{fetch};
+ if ($fetch) {
+ foreach my $p (keys %$fetch) {
+ basename($fetch->{$p}) eq 'trunk' or next;
+ $gs = Git::SVN->new($fetch->{$p}, $gs->{repo_id}, $p);
+ last;
+ }
+ }
+
my $valid_head = verify_ref('HEAD^0');
command_noisy(qw(update-ref refs/heads/master), $gs->refname);
return if ($valid_head || !verify_ref('HEAD^0'));
return unless defined $glob_spec;
my $ref = $glob_spec->{ref};
my $path = $glob_spec->{path};
- foreach (command(qw#for-each-ref --format=%(refname) refs/remotes#)) {
- next unless m#^refs/remotes/$ref->{regex}$#;
+ foreach (command(qw#for-each-ref --format=%(refname) refs/#)) {
+ next unless m#^$ref->{regex}$#;
my $p = $1;
my $pathname = desanitize_refname($path->full_path($p));
my $refname = desanitize_refname($ref->full_path($p));
if (my $existing = $fetch->{$pathname}) {
if ($existing ne $refname) {
die "Refspec conflict:\n",
- "existing: refs/remotes/$existing\n",
- " globbed: refs/remotes/$refname\n";
+ "existing: $existing\n",
+ " globbed: $refname\n";
}
- my $u = (::cmt_metadata("refs/remotes/$refname"))[0];
+ my $u = (::cmt_metadata("$refname"))[0];
$u =~ s!^\Q$url\E(/|$)!! or die
- "refs/remotes/$refname: '$url' not found in '$u'\n";
+ "$refname: '$url' not found in '$u'\n";
if ($pathname ne $u) {
warn "W: Refspec glob conflict ",
- "(ref: refs/remotes/$refname):\n",
+ "(ref: $refname):\n",
"expected path: $pathname\n",
" real path: $u\n",
"Continuing ahead with $u\n";
my $use_svm_props = eval { command_oneline(qw/config --bool
svn.useSvmProps/) };
$use_svm_props = $use_svm_props eq 'true' if $use_svm_props;
+ my $svn_refspec = qr{\s*/?(.*?)\s*:\s*(.+?)\s*};
foreach (grep { s/^svn-remote\.// } command(qw/config -l/)) {
- if (m!^(.+)\.fetch=\s*(.*)\s*:\s*(.+)\s*$!) {
- my ($remote, $local_ref, $_remote_ref) = ($1, $2, $3);
- die("svn-remote.$remote: remote ref '$_remote_ref' "
- . "must start with 'refs/remotes/'\n")
- unless $_remote_ref =~ m{^refs/remotes/(.+)};
- my $remote_ref = $1;
- $local_ref =~ s{^/}{};
+ if (m!^(.+)\.fetch=$svn_refspec$!) {
+ my ($remote, $local_ref, $remote_ref) = ($1, $2, $3);
+ die("svn-remote.$remote: remote ref '$remote_ref' "
+ . "must start with 'refs/'\n")
+ unless $remote_ref =~ m{^refs/};
$r->{$remote}->{fetch}->{$local_ref} = $remote_ref;
$r->{$remote}->{svm} = {} if $use_svm_props;
} elsif (m!^(.+)\.usesvmprops=\s*(.*)\s*$!) {
$r->{$1}->{svm} = {};
} elsif (m!^(.+)\.url=\s*(.*)\s*$!) {
$r->{$1}->{url} = $2;
- } elsif (m!^(.+)\.(branches|tags)=
- (.*):refs/remotes/(.+)\s*$/!x) {
- my ($p, $g) = ($3, $4);
+ } elsif (m!^(.+)\.(branches|tags)=$svn_refspec$!) {
+ my ($remote, $t, $local_ref, $remote_ref) =
+ ($1, $2, $3, $4);
+ die("svn-remote.$remote: remote ref '$remote_ref' ($t) "
+ . "must start with 'refs/'\n")
+ unless $remote_ref =~ m{^refs/};
my $rs = {
- t => $2,
- remote => $1,
- path => Git::SVN::GlobSpec->new($p),
- ref => Git::SVN::GlobSpec->new($g) };
+ t => $t,
+ remote => $remote,
+ path => Git::SVN::GlobSpec->new($local_ref),
+ ref => Git::SVN::GlobSpec->new($remote_ref) };
if (length($rs->{ref}->{right}) != 0) {
die "The '*' glob character must be the last ",
- "character of '$g'\n";
+ "character of '$remote_ref'\n";
}
- push @{ $r->{$1}->{$2} }, $rs;
+ push @{ $r->{$remote}->{$t} }, $rs;
}
}
}
}
my ($xrepo_id, $xpath) = find_ref($self->refname);
- if (defined $xpath) {
+ if (!$no_write && defined $xpath) {
die "svn-remote.$xrepo_id.fetch already set to track ",
- "$xpath:refs/remotes/", $self->refname, "\n";
+ "$xpath:", $self->refname, "\n";
}
unless ($no_write) {
command_noisy('config',
my ($ref_id) = @_;
foreach (command(qw/config -l/)) {
next unless m!^svn-remote\.(.+)\.fetch=
- \s*(.*)\s*:\s*refs/remotes/(.+)\s*$!x;
+ \s*/?(.*?)\s*:\s*(.+?)\s*$!x;
my ($repo_id, $path, $ref) = ($1, $2, $3);
if ($ref eq $ref_id) {
$path = '' if ($path =~ m#^\./?#);
if (!defined $repo_id) {
die "Could not find a \"svn-remote.*.fetch\" key ",
"in the repository configuration matching: ",
- "refs/remotes/$ref_id\n";
+ "$ref_id\n";
}
}
my $self = _new($class, $repo_id, $ref_id, $path);
if (!defined $self->{path} || !length $self->{path}) {
my $fetch = command_oneline('config', '--get',
"svn-remote.$repo_id.fetch",
- ":refs/remotes/$ref_id\$") or
+ ":$ref_id\$") or
die "Failed to read \"svn-remote.$repo_id.fetch\" ",
- "\":refs/remotes/$ref_id\$\" in config\n";
+ "\":$ref_id\$\" in config\n";
($self->{path}, undef) = split(/\s*:\s*/, $fetch);
}
$self->{url} = command_oneline('config', '--get',
}
sub refname {
- my ($refname) = "refs/remotes/$_[0]->{ref_id}" ;
+ my ($refname) = $_[0]->{ref_id} ;
# It cannot end with a slash /, we'll throw up on this because
# SVN can't have directories with a slash in their name, either:
my $i = int(($l/24 + $u/24) / 2) * 24;
sysseek($fh, $i, SEEK_SET) or croak "seek: $!";
sysread($fh, my $buf, 24) == 24 or croak "read: $!";
- my ($r, $c) = unpack('NH40', $buf);
+ my ($r, $c) = unpack(rev_map_fmt, $buf);
if ($r < $rev) {
$l = $i + 24;
$repo_id = $Git::SVN::default_repo_id;
}
unless (defined $ref_id && length $ref_id) {
- $_[2] = $ref_id = $Git::SVN::default_ref_id;
+ $_prefix = '' unless defined($_prefix);
+ $_[2] = $ref_id =
+ "refs/remotes/$_prefix$Git::SVN::default_ref_id";
}
$_[1] = $repo_id;
my $dir = "$ENV{GIT_DIR}/svn/$ref_id";
+
+ # Older repos imported by us used $GIT_DIR/svn/foo instead of
+ # $GIT_DIR/svn/refs/remotes/foo when tracking refs/remotes/foo
+ if ($ref_id =~ m{^refs/remotes/(.*)}) {
+ my $old_dir = "$ENV{GIT_DIR}/svn/$1";
+ if (-d $old_dir && ! -d $dir) {
+ $dir = $old_dir;
+ }
+ }
+
$_[3] = $path = '' unless (defined $path);
- mkpath(["$ENV{GIT_DIR}/svn"]);
+ mkpath([$dir]);
bless {
ref_id => $ref_id, dir => $dir, index => "$dir/index",
path => $path, config => "$ENV{GIT_DIR}/svn/config",
my $pfx = "svn-remote.$x->{old_repo_id}";
my $old_fetch = quotemeta("$x->{old_path}:".
- "refs/remotes/$x->{ref_id}");
+ "$x->{ref_id}");
command_noisy(qw/config --unset/,
"$pfx.fetch", '^'. $old_fetch . '$');
delete $r->{$x->{old_repo_id}}->
my ($class, $glob) = @_;
my $re = $glob;
$re =~ s!/+$!!g; # no need for trailing slashes
- $re =~ m!^([^*]*)(\*(?:/\*)*)([^*]*)$!;
+ $re =~ m!^([^*]*)(\*(?:/\*)*)(.*)$!;
my $temp = $re;
my ($left, $right) = ($1, $3);
$re = $2;
* if we fail because the command is not found, it is
* OK to return. Otherwise, we just pass along the status code.
*/
- status = run_command_v_opt(argv, 0);
- if (status != -ERR_RUN_COMMAND_EXEC) {
- if (IS_RUN_COMMAND_ERR(status))
- die("unable to run '%s'", argv[0]);
- exit(-status);
- }
- errno = ENOENT; /* as if we called execvp */
+ status = run_command_v_opt(argv, RUN_SILENT_EXEC_FAILURE);
+ if (status >= 0 || errno != ENOENT)
+ exit(status);
argv[0] = tmp;
if {$sdm != 2} {
lappend ret $id
} else {
- lset ret end [lindex $ret end]...$id
+ lset ret end $id...[lindex $ret end]
}
lappend pos $id
}
global tagids idtags headids idheads tagobjid
global otherrefids idotherrefs mainhead mainheadid
global selecthead selectheadid
+ global hideremotes
foreach v {tagids idtags headids idheads otherrefids idotherrefs} {
catch {unset $v}
if {![string match "refs/*" $ref]} continue
set name [string range $ref 5 end]
if {[string match "remotes/*" $name]} {
- if {![string match "*/HEAD" $name]} {
+ if {![string match "*/HEAD" $name] && !$hideremotes} {
set headids($name) $id
lappend idheads($id) $name
}
global cmitmode wrapcomment datetimeformat limitdiffs
global colors bgcolor fgcolor diffcolors diffcontext selectbgcolor
global autoselect extdifftool perfile_attrs markbgcolor
+ global hideremotes
if {$stuffsaved} return
if {![winfo viewable .]} return
puts $f [list set wrapcomment $wrapcomment]
puts $f [list set autoselect $autoselect]
puts $f [list set showneartags $showneartags]
+ puts $f [list set hideremotes $hideremotes]
puts $f [list set showlocalchanges $showlocalchanges]
puts $f [list set datetimeformat $datetimeformat]
puts $f [list set limitdiffs $limitdiffs]
}
set id [lindex $matches 0]
}
+ } else {
+ if {[catch {set id [exec git rev-parse --verify $sha1string]}]} {
+ error_popup [mc "Revision %s is not known" $sha1string]
+ return
+ }
}
}
if {[commitinview $id $curview]} {
if {[regexp {^[0-9a-fA-F]{4,}$} $sha1string]} {
set msg [mc "SHA1 id %s is not known" $sha1string]
} else {
- set msg [mc "Tag/Head %s is not known" $sha1string]
+ set msg [mc "Revision %s is not in the current view" $sha1string]
}
error_popup $msg
}
global oldprefs prefstop showneartags showlocalchanges
global bgcolor fgcolor ctext diffcolors selectbgcolor markbgcolor
global tabstop limitdiffs autoselect extdifftool perfile_attrs
+ global hideremotes
set top .gitkprefs
set prefstop $top
return
}
foreach v {maxwidth maxgraphpct showneartags showlocalchanges \
- limitdiffs tabstop perfile_attrs} {
+ limitdiffs tabstop perfile_attrs hideremotes} {
set oldprefs($v) [set $v]
}
toplevel $top
checkbutton $top.ntag -text [mc "Display nearby tags"] \
-font optionfont -variable showneartags
grid x $top.ntag -sticky w
+ checkbutton $top.hideremotes -text [mc "Hide remote refs"] \
+ -font optionfont -variable hideremotes
+ grid x $top.hideremotes -sticky w
checkbutton $top.ldiff -text [mc "Limit diffs to listed paths"] \
-font optionfont -variable limitdiffs
grid x $top.ldiff -sticky w
global oldprefs prefstop
foreach v {maxwidth maxgraphpct showneartags showlocalchanges \
- limitdiffs tabstop perfile_attrs} {
+ limitdiffs tabstop perfile_attrs hideremotes} {
global $v
set $v $oldprefs($v)
}
global oldprefs prefstop showneartags showlocalchanges
global fontpref mainfont textfont uifont
global limitdiffs treediffs perfile_attrs
+ global hideremotes
catch {destroy $prefstop}
unset prefstop
$limitdiffs != $oldprefs(limitdiffs)} {
reselectline
}
+ if {$hideremotes != $oldprefs(hideremotes)} {
+ rereadrefs
+ }
}
proc formatdate {d} {
} else {
set r "unspecified"
if {![catch {set line [exec git check-attr $attr -- $path]}]} {
- regexp "(.*): encoding: (.*)" $line m f r
+ regexp "(.*): $attr: (.*)" $line m f r
}
set path_attr_cache($attr,$path) $r
}
set newlist [lrange $newlist $lim end]
if {![catch {set rlist [eval exec git check-attr $attr -- $head]}]} {
foreach row [split $rlist "\n"] {
- if {[regexp "(.*): encoding: (.*)" $row m path value]} {
+ if {[regexp "(.*): $attr: (.*)" $row m path value]} {
if {[string index $path 0] eq "\""} {
set path [encoding convertfrom [lindex $path 0]]
}
set cmitmode "patch"
set wrapcomment "none"
set showneartags 1
+set hideremotes 0
set maxrefs 20
set maxlinelen 200
set showlocalchanges 1
text-align: left;
}
-tr.light:hover {
- background-color: #edece6;
-}
-
-tr.dark {
- background-color: #f6f6f0;
+/* do not change row style on hover for 'blame' view */
+tr.light,
+table.blame .light:hover {
+ background-color: #ffffff;
}
-tr.dark2 {
+tr.dark,
+table.blame .dark:hover {
background-color: #f6f6f0;
}
+/* currently both use the same, but it can change */
+tr.light:hover,
tr.dark:hover {
background-color: #edece6;
}
+/* boundary commits in 'blame' view */
+/* and commits without "previous" */
+tr.boundary td.sha1,
+tr.no-previous td.linenr {
+ font-weight: bold;
+}
+
td {
padding: 2px 5px;
font-size: 100%;
font-family: monospace;
}
-td.error {
+.error {
color: red;
background-color: yellow;
}
if (defined $params{'hash_parent_base'}) {
$href .= esc_url($params{'hash_parent_base'});
# skip the file_parent if it's the same as the file_name
- delete $params{'file_parent'} if $params{'file_parent'} eq $params{'file_name'};
- if (defined $params{'file_parent'} && $params{'file_parent'} !~ /\.\./) {
- $href .= ":/".esc_url($params{'file_parent'});
- delete $params{'file_parent'};
+ if (defined $params{'file_parent'}) {
+ if (defined $params{'file_name'} && $params{'file_parent'} eq $params{'file_name'}) {
+ delete $params{'file_parent'};
+ } elsif ($params{'file_parent'} !~ /\.\./) {
+ $href .= ":/".esc_url($params{'file_parent'});
+ delete $params{'file_parent'};
+ }
}
$href .= "..";
delete $params{'hash_parent'};
} elsif ((!defined $withparents) && ($line =~ m/^parent ([0-9a-fA-F]{40})$/)) {
push @parents, $1;
} elsif ($line =~ m/^author (.*) ([0-9]+) (.*)$/) {
- $co{'author'} = $1;
+ $co{'author'} = to_utf8($1);
$co{'author_epoch'} = $2;
$co{'author_tz'} = $3;
if ($co{'author'} =~ m/^([^<]+) <([^>]*)>/) {
$co{'author_name'} = $co{'author'};
}
} elsif ($line =~ m/^committer (.*) ([0-9]+) (.*)$/) {
- $co{'committer'} = $1;
+ $co{'committer'} = to_utf8($1);
$co{'committer_epoch'} = $2;
$co{'committer_tz'} = $3;
- $co{'committer_name'} = $co{'committer'};
if ($co{'committer'} =~ m/^([^<]+) <([^>]*)>/) {
$co{'committer_name'} = $1;
$co{'committer_email'} = $2;
git_print_page_path($file_name, $ftype, $hash_base);
# page body
- my @rev_color = qw(light2 dark2);
+ my @rev_color = qw(light dark);
my $num_colors = scalar(@rev_color);
my $current_color = 0;
my %metainfo = ();
my ($full_rev, $orig_lineno, $lineno, $group_size) =
($line =~ /^([0-9a-f]{40}) (\d+) (\d+)(?: (\d+))?$/);
if (!exists $metainfo{$full_rev}) {
- $metainfo{$full_rev} = {};
+ $metainfo{$full_rev} = { 'nprevious' => 0 };
}
my $meta = $metainfo{$full_rev};
my $data;
while ($data = <$fd>) {
chomp $data;
last if ($data =~ s/^\t//); # contents of line
- if ($data =~ /^(\S+) (.*)$/) {
- $meta->{$1} = $2;
+ if ($data =~ /^(\S+)(?: (.*))?$/) {
+ $meta->{$1} = $2 unless exists $meta->{$1};
+ }
+ if ($data =~ /^previous /) {
+ $meta->{'nprevious'}++;
}
}
my $short_rev = substr($full_rev, 0, 8);
if ($group_size) {
$current_color = ($current_color + 1) % $num_colors;
}
- print "<tr id=\"l$lineno\" class=\"$rev_color[$current_color]\">\n";
+ my $tr_class = $rev_color[$current_color];
+ $tr_class .= ' boundary' if (exists $meta->{'boundary'});
+ $tr_class .= ' no-previous' if ($meta->{'nprevious'} == 0);
+ $tr_class .= ' multiple-previous' if ($meta->{'nprevious'} > 1);
+ print "<tr id=\"l$lineno\" class=\"$tr_class\">\n";
if ($group_size) {
print "<td class=\"sha1\"";
print " title=\"". esc_html($author) . ", $date\"";
hash=>$full_rev,
file_name=>$file_name)},
esc_html($short_rev));
+ if ($group_size >= 2) {
+ my @author_initials = ($author =~ /\b([[:upper:]])\B/g);
+ if (@author_initials) {
+ print "<br />" .
+ esc_html(join('', @author_initials));
+ # or join('.', ...)
+ }
+ }
print "</td>\n";
}
- my $parent_commit;
- if (!exists $meta->{'parent'}) {
- open (my $dd, "-|", git_cmd(), "rev-parse", "$full_rev^")
- or die_error(500, "Open git-rev-parse failed");
- $parent_commit = <$dd>;
- close $dd;
- chomp($parent_commit);
- $meta->{'parent'} = $parent_commit;
- } else {
- $parent_commit = $meta->{'parent'};
- }
+ # 'previous' <sha1 of parent commit> <filename at commit>
+ if (exists $meta->{'previous'} &&
+ $meta->{'previous'} =~ /^([a-fA-F0-9]{40}) (.*)$/) {
+ $meta->{'parent'} = $1;
+ $meta->{'file_parent'} = unquote($2);
+ }
+ my $linenr_commit =
+ exists($meta->{'parent'}) ?
+ $meta->{'parent'} : $full_rev;
+ my $linenr_filename =
+ exists($meta->{'file_parent'}) ?
+ $meta->{'file_parent'} : unquote($meta->{'filename'});
my $blamed = href(action => 'blame',
- file_name => $meta->{'filename'},
- hash_base => $parent_commit);
+ file_name => $linenr_filename,
+ hash_base => $linenr_commit);
print "<td class=\"linenr\">";
print $cgi->a({ -href => "$blamed#l$orig_lineno",
-class => "linenr" },
int pathname;
int null_following_name;
int color;
+ int max_depth;
int funcname;
char color_match[COLOR_MAXLEN];
const char *color_external;
struct http_pack_request *new_http_pack_request(
struct packed_git *target, const char *base_url)
{
- char *url;
char *filename;
long prev_posn = 0;
char range[RANGE_HEADER_SIZE];
end_url_with_slash(&buf, base_url);
strbuf_addf(&buf, "objects/pack/pack-%s.pack",
sha1_to_hex(target->sha1));
- url = strbuf_detach(&buf, NULL);
- preq->url = xstrdup(url);
+ preq->url = strbuf_detach(&buf, NULL);
filename = sha1_pack_name(target->sha1);
snprintf(preq->filename, sizeof(preq->filename), "%s", filename);
preq->slot->local = preq->packfile;
curl_easy_setopt(preq->slot->curl, CURLOPT_FILE, preq->packfile);
curl_easy_setopt(preq->slot->curl, CURLOPT_WRITEFUNCTION, fwrite);
- curl_easy_setopt(preq->slot->curl, CURLOPT_URL, url);
+ curl_easy_setopt(preq->slot->curl, CURLOPT_URL, preq->url);
curl_easy_setopt(preq->slot->curl, CURLOPT_HTTPHEADER,
no_pragma_header);
abort:
free(filename);
+ free(preq->url);
+ free(preq);
return NULL;
}
char *hex = sha1_to_hex(sha1);
char *filename;
char prevfile[PATH_MAX];
- char *url;
int prevlocal;
unsigned char prev_buf[PREV_BUF_SIZE];
ssize_t prev_read = 0;
git_SHA1_Init(&freq->c);
- url = get_remote_object_url(base_url, hex, 0);
- freq->url = xstrdup(url);
+ freq->url = get_remote_object_url(base_url, hex, 0);
/*
* If a previous temp file is present, process what was already
if (prev_posn>0) {
prev_posn = 0;
lseek(freq->localfile, 0, SEEK_SET);
- ftruncate(freq->localfile, 0);
+ if (ftruncate(freq->localfile, 0) < 0) {
+ error("Couldn't truncate temporary file %s for %s: %s",
+ freq->tmpfile, freq->filename, strerror(errno));
+ goto abort;
+ }
}
}
curl_easy_setopt(freq->slot->curl, CURLOPT_FILE, freq);
curl_easy_setopt(freq->slot->curl, CURLOPT_WRITEFUNCTION, fwrite_sha1_file);
curl_easy_setopt(freq->slot->curl, CURLOPT_ERRORBUFFER, freq->errorstr);
- curl_easy_setopt(freq->slot->curl, CURLOPT_URL, url);
+ curl_easy_setopt(freq->slot->curl, CURLOPT_URL, freq->url);
curl_easy_setopt(freq->slot->curl, CURLOPT_HTTPHEADER, no_pragma_header);
/*
return freq;
- free(url);
abort:
free(filename);
+ free(freq->url);
free(freq);
return NULL;
}
args[2] = cmd.buf;
status = run_command_v_opt(args, 0);
- if (status < -ERR_RUN_COMMAND_FORK)
- ; /* failure in run-command */
- else
- status = -status;
fd = open(temp[1], O_RDONLY);
if (fd < 0)
goto bad;
return result;
}
-static int has_non_ascii(const char *s)
-{
- int ch;
- if (!s)
- return 0;
- while ((ch = *s++) != '\0') {
- if (non_ascii(ch))
- return 1;
- }
- return 0;
-}
-
void get_patch_filename(struct commit *commit, int nr, const char *suffix,
struct strbuf *buf)
{
"%s added in %s",
ren1_src, ren1_dst, branch1,
ren1_dst, branch2);
- new_path = unique_path(o, ren1_dst, branch2);
- output(o, 1, "Adding as %s instead", new_path);
- update_file(o, 0, dst_other.sha1, dst_other.mode, new_path);
+ if (o->call_depth) {
+ struct merge_file_info mfi;
+ struct diff_filespec one, a, b;
+
+ one.path = a.path = b.path =
+ (char *)ren1_dst;
+ hashcpy(one.sha1, null_sha1);
+ one.mode = 0;
+ hashcpy(a.sha1, ren1->pair->two->sha1);
+ a.mode = ren1->pair->two->mode;
+ hashcpy(b.sha1, dst_other.sha1);
+ b.mode = dst_other.mode;
+ mfi = merge_file(o, &one, &a, &b,
+ branch1,
+ branch2);
+ output(o, 1, "Adding merged %s", ren1_dst);
+ update_file(o, 0,
+ mfi.sha,
+ mfi.mode,
+ ren1_dst);
+ } else {
+ new_path = unique_path(o, ren1_dst, branch2);
+ output(o, 1, "Adding as %s instead", new_path);
+ update_file(o, 0, dst_other.sha1, dst_other.mode, new_path);
+ }
} else if ((item = string_list_lookup(ren1_dst, renames2Dst))) {
ren2 = item->util;
clean_merge = 0;
continue;
pos = fprintf(stderr, " ");
- if (opts->short_name) {
+ if (opts->short_name && !(opts->flags & PARSE_OPT_NEGHELP)) {
if (opts->flags & PARSE_OPT_NODASH)
pos += fprintf(stderr, "%c", opts->short_name);
else
if (opts->long_name && opts->short_name)
pos += fprintf(stderr, ", ");
if (opts->long_name)
- pos += fprintf(stderr, "--%s", opts->long_name);
+ pos += fprintf(stderr, "--%s%s",
+ (opts->flags & PARSE_OPT_NEGHELP) ? "no-" : "",
+ opts->long_name);
if (opts->type == OPTION_NUMBER)
pos += fprintf(stderr, "-NUM");
PARSE_OPT_LASTARG_DEFAULT = 16,
PARSE_OPT_NODASH = 32,
PARSE_OPT_LITERAL_ARGHELP = 64,
+ PARSE_OPT_NEGHELP = 128,
};
struct option;
* PARSE_OPT_LITERAL_ARGHELP: says that argh shouldn't be enclosed in brackets
* (i.e. '<argh>') in the help message.
* Useful for options with multiple parameters.
+ * PARSE_OPT_NEGHELP: says that the long option should always be shown with
+ * the --no prefix in the usage message. Sometimes
+ * useful for users of OPTION_NEGBIT.
*
* `callback`::
* pointer to the callback to use for OPTION_CALLBACK.
return !isascii(ch) || ch == '\033';
}
+int has_non_ascii(const char *s)
+{
+ int ch;
+ if (!s)
+ return 0;
+ while ((ch = *s++) != '\0') {
+ if (non_ascii(ch))
+ return 1;
+ }
+ return 0;
+}
+
static int is_rfc2047_special(char ch)
{
return (non_ascii(ch) || (ch == '=') || (ch == '?') || (ch == '_'));
strbuf_init(&path, 20);
strbuf_addstr(&path, file);
- result = remove_dir_recursively(&path, 1);
+ result = remove_dir_recursively(&path, REMOVE_DIR_EMPTY_ONLY);
strbuf_release(&path);
{
int need_in, need_out, need_err;
int fdin[2], fdout[2], fderr[2];
+ int failed_errno = failed_errno;
/*
* In case of errors we must keep the promise to close FDs
need_in = !cmd->no_stdin && cmd->in < 0;
if (need_in) {
if (pipe(fdin) < 0) {
+ failed_errno = errno;
if (cmd->out > 0)
close(cmd->out);
- return -ERR_RUN_COMMAND_PIPE;
+ goto fail_pipe;
}
cmd->in = fdin[1];
}
&& cmd->out < 0;
if (need_out) {
if (pipe(fdout) < 0) {
+ failed_errno = errno;
if (need_in)
close_pair(fdin);
else if (cmd->in)
close(cmd->in);
- return -ERR_RUN_COMMAND_PIPE;
+ goto fail_pipe;
}
cmd->out = fdout[0];
}
need_err = !cmd->no_stderr && cmd->err < 0;
if (need_err) {
if (pipe(fderr) < 0) {
+ failed_errno = errno;
if (need_in)
close_pair(fdin);
else if (cmd->in)
close_pair(fdout);
else if (cmd->out)
close(cmd->out);
- return -ERR_RUN_COMMAND_PIPE;
+fail_pipe:
+ error("cannot create pipe for %s: %s",
+ cmd->argv[0], strerror(failed_errno));
+ errno = failed_errno;
+ return -1;
}
cmd->err = fderr[0];
}
strerror(errno));
exit(127);
}
+ if (cmd->pid < 0)
+ error("cannot fork() for %s: %s", cmd->argv[0],
+ strerror(failed_errno = errno));
#else
int s0 = -1, s1 = -1, s2 = -1; /* backups of stdin, stdout, stderr */
const char **sargv = cmd->argv;
}
cmd->pid = mingw_spawnvpe(cmd->argv[0], cmd->argv, env);
+ failed_errno = errno;
+ if (cmd->pid < 0 && (!cmd->silent_exec_failure || errno != ENOENT))
+ error("cannot spawn %s: %s", cmd->argv[0], strerror(errno));
if (cmd->env)
free_environ(env);
#endif
if (cmd->pid < 0) {
- int err = errno;
if (need_in)
close_pair(fdin);
else if (cmd->in)
close(cmd->out);
if (need_err)
close_pair(fderr);
- return err == ENOENT ?
- -ERR_RUN_COMMAND_EXEC :
- -ERR_RUN_COMMAND_FORK;
+ errno = failed_errno;
+ return -1;
}
if (need_in)
return 0;
}
-static int wait_or_whine(pid_t pid)
+static int wait_or_whine(pid_t pid, const char *argv0, int silent_exec_failure)
{
- for (;;) {
- int status, code;
- pid_t waiting = waitpid(pid, &status, 0);
-
- if (waiting < 0) {
- if (errno == EINTR)
- continue;
- error("waitpid failed (%s)", strerror(errno));
- return -ERR_RUN_COMMAND_WAITPID;
- }
- if (waiting != pid)
- return -ERR_RUN_COMMAND_WAITPID_WRONG_PID;
- if (WIFSIGNALED(status))
- return -ERR_RUN_COMMAND_WAITPID_SIGNAL;
-
- if (!WIFEXITED(status))
- return -ERR_RUN_COMMAND_WAITPID_NOEXIT;
+ int status, code = -1;
+ pid_t waiting;
+ int failed_errno = 0;
+
+ while ((waiting = waitpid(pid, &status, 0)) < 0 && errno == EINTR)
+ ; /* nothing */
+
+ if (waiting < 0) {
+ failed_errno = errno;
+ error("waitpid for %s failed: %s", argv0, strerror(errno));
+ } else if (waiting != pid) {
+ error("waitpid is confused (%s)", argv0);
+ } else if (WIFSIGNALED(status)) {
+ code = WTERMSIG(status);
+ error("%s died of signal %d", argv0, code);
+ /*
+ * This return value is chosen so that code & 0xff
+ * mimics the exit code that a POSIX shell would report for
+ * a program that died from this signal.
+ */
+ code -= 128;
+ } else if (WIFEXITED(status)) {
code = WEXITSTATUS(status);
- switch (code) {
- case 127:
- return -ERR_RUN_COMMAND_EXEC;
- case 0:
- return 0;
- default:
- return -code;
+ /*
+ * Convert special exit code when execvp failed.
+ */
+ if (code == 127) {
+ code = -1;
+ failed_errno = ENOENT;
+ if (!silent_exec_failure)
+ error("cannot run %s: %s", argv0,
+ strerror(ENOENT));
}
+ } else {
+ error("waitpid is confused (%s)", argv0);
}
+ errno = failed_errno;
+ return code;
}
int finish_command(struct child_process *cmd)
{
- return wait_or_whine(cmd->pid);
+ return wait_or_whine(cmd->pid, cmd->argv[0], cmd->silent_exec_failure);
}
int run_command(struct child_process *cmd)
cmd->no_stdin = opt & RUN_COMMAND_NO_STDIN ? 1 : 0;
cmd->git_cmd = opt & RUN_GIT_CMD ? 1 : 0;
cmd->stdout_to_stderr = opt & RUN_COMMAND_STDOUT_TO_STDERR ? 1 : 0;
+ cmd->silent_exec_failure = opt & RUN_SILENT_EXEC_FAILURE ? 1 : 0;
}
int run_command_v_opt(const char **argv, int opt)
int finish_async(struct async *async)
{
#ifndef __MINGW32__
- int ret = 0;
-
- if (wait_or_whine(async->pid))
- ret = error("waitpid (async) failed");
+ int ret = wait_or_whine(async->pid, "child process", 0);
#else
DWORD ret = 0;
if (WaitForSingleObject(async->tid, INFINITE) != WAIT_OBJECT_0)
hook.env = env;
}
- ret = start_command(&hook);
+ ret = run_command(&hook);
free(argv);
- if (ret) {
- warning("Could not spawn %s", argv[0]);
- return ret;
- }
- ret = finish_command(&hook);
- if (ret == -ERR_RUN_COMMAND_WAITPID_SIGNAL)
- warning("%s exited due to uncaught signal", argv[0]);
-
return ret;
}
#ifndef RUN_COMMAND_H
#define RUN_COMMAND_H
-enum {
- ERR_RUN_COMMAND_FORK = 10000,
- ERR_RUN_COMMAND_EXEC,
- ERR_RUN_COMMAND_PIPE,
- ERR_RUN_COMMAND_WAITPID,
- ERR_RUN_COMMAND_WAITPID_WRONG_PID,
- ERR_RUN_COMMAND_WAITPID_SIGNAL,
- ERR_RUN_COMMAND_WAITPID_NOEXIT,
-};
-#define IS_RUN_COMMAND_ERR(x) (-(x) >= ERR_RUN_COMMAND_FORK)
-
struct child_process {
const char **argv;
pid_t pid;
unsigned no_stdout:1;
unsigned no_stderr:1;
unsigned git_cmd:1; /* if this is to be git sub-command */
+ unsigned silent_exec_failure:1;
unsigned stdout_to_stderr:1;
void (*preexec_cb)(void);
};
#define RUN_COMMAND_NO_STDIN 1
#define RUN_GIT_CMD 2 /*If this is to be git sub-command */
#define RUN_COMMAND_STDOUT_TO_STDERR 4
+#define RUN_SILENT_EXEC_FAILURE 8
int run_command_v_opt(const char **argv, int opt);
/*
struct send_pack_args {
unsigned verbose:1,
+ quiet:1,
send_mirror:1,
force_update:1,
use_thin_pack:1,
longest_path_match(name, len, cache->path, cache->len,
&previous_slash);
match_flags = cache->flags & track_flags & (FL_NOENT|FL_SYMLINK);
+
+ if (!(track_flags & FL_FULLPATH) && match_len == len)
+ match_len = last_slash = previous_slash;
+
if (match_flags && match_len == cache->len)
return match_flags;
/*
# Copyright (c) 2005 Junio C Hamano
#
+-include ../config.mak
+
#GIT_TEST_OPTS=--verbose --debug
SHELL_PATH ?= $(SHELL)
TAR ?= $(TAR)
--- /dev/null
+#!/bin/sh
+
+. ./test-lib.sh
+
+unset CVS_SERVER
+# for clean cvsps cache
+HOME=$(pwd)
+export HOME
+
+if ! type cvs >/dev/null 2>&1
+then
+ say 'skipping cvsimport tests, cvs not found'
+ test_done
+fi
+
+CVS="cvs -f"
+export CVS
+
+cvsps_version=`cvsps -h 2>&1 | sed -ne 's/cvsps version //p'`
+case "$cvsps_version" in
+2.1 | 2.2*)
+ ;;
+'')
+ say 'skipping cvsimport tests, cvsps not found'
+ test_done
+ ;;
+*)
+ say 'skipping cvsimport tests, unsupported cvsps version'
+ test_done
+ ;;
+esac
+
+test_cvs_co () {
+ # Usage: test_cvs_co BRANCH_NAME
+ rm -rf module-cvs-"$1"
+ if [ "$1" = "master" ]
+ then
+ $CVS co -P -d module-cvs-"$1" -A module
+ else
+ $CVS co -P -d module-cvs-"$1" -r "$1" module
+ fi
+}
+
+test_git_co () {
+ # Usage: test_git_co BRANCH_NAME
+ (cd module-git && git checkout "$1")
+}
+
+test_cmp_branch_file () {
+ # Usage: test_cmp_branch_file BRANCH_NAME PATH
+ # The branch must already be checked out of CVS and git.
+ test_cmp module-cvs-"$1"/"$2" module-git/"$2"
+}
+
+test_cmp_branch_tree () {
+ # Usage: test_cmp_branch_tree BRANCH_NAME
+ # Check BRANCH_NAME out of CVS and git and make sure that all
+ # of the files and directories are identical.
+
+ test_cvs_co "$1" &&
+ test_git_co "$1" &&
+ (
+ cd module-cvs-"$1"
+ find . -type d -name CVS -prune -o -type f -print
+ ) | sort >module-cvs-"$1".list &&
+ (
+ cd module-git
+ find . -type d -name .git -prune -o -type f -print
+ ) | sort >module-git-"$1".list &&
+ test_cmp module-cvs-"$1".list module-git-"$1".list &&
+ cat module-cvs-"$1".list | while read f
+ do
+ test_cmp_branch_file "$1" "$f" || return 1
+ done
+}
fi
GIT_DIR=$PWD/.git
-GIT_SVN_DIR=$GIT_DIR/svn/git-svn
+GIT_SVN_DIR=$GIT_DIR/svn/refs/remotes/git-svn
SVN_TREE=$GIT_SVN_DIR/svn-tree
svn >/dev/null 2>&1
)
'
+test_expect_success 'init creates a new directory' '
+ rm -fr newdir &&
+ (
+ git init newdir &&
+ test -d newdir/.git/refs
+ )
+'
+
+test_expect_success 'init creates a new bare directory' '
+ rm -fr newdir &&
+ (
+ git init --bare newdir &&
+ test -d newdir/refs
+ )
+'
+
+test_expect_success 'init recreates a directory' '
+ rm -fr newdir &&
+ (
+ mkdir newdir &&
+ git init newdir &&
+ test -d newdir/.git/refs
+ )
+'
+
+test_expect_success 'init recreates a new bare directory' '
+ rm -fr newdir &&
+ (
+ mkdir newdir &&
+ git init --bare newdir &&
+ test -d newdir/refs
+ )
+'
+
+test_expect_success 'init creates a new deep directory' '
+ rm -fr newdir &&
+ git init newdir/a/b/c &&
+ test -d newdir/a/b/c/.git/refs
+'
+
+test_expect_success POSIXPERM 'init creates a new deep directory (umask vs. shared)' '
+ rm -fr newdir &&
+ (
+ # Leading directories should honor umask while
+ # the repository itself should follow "shared"
+ umask 002 &&
+ git init --bare --shared=0660 newdir/a/b/c &&
+ test -d newdir/a/b/c/refs &&
+ ls -ld newdir/a newdir/a/b > lsab.out &&
+ ! grep -v "^drwxrw[sx]r-x" lsab.out &&
+ ls -ld newdir/a/b/c > lsc.out &&
+ ! grep -v "^drwxrw[sx]---" lsc.out
+ )
+'
+
+test_expect_success 'init notices EEXIST (1)' '
+ rm -fr newdir &&
+ (
+ >newdir &&
+ test_must_fail git init newdir &&
+ test -f newdir
+ )
+'
+
+test_expect_success 'init notices EEXIST (2)' '
+ rm -fr newdir &&
+ (
+ mkdir newdir &&
+ >newdir/a
+ test_must_fail git init newdir/a/b &&
+ test -f newdir/a
+ )
+'
+
+test_expect_success POSIXPERM 'init notices EPERM' '
+ rm -fr newdir &&
+ (
+ mkdir newdir &&
+ chmod -w newdir &&
+ test_must_fail git init newdir/a/b
+ )
+'
+
test_done
'
. ./test-lib.sh
-. ../lib-rebase.sh
+. "$TEST_DIRECTORY"/lib-rebase.sh
set_fake_editor
git fetch &&
git rebase -p origin/topic &&
test 1 = $(git rev-list --all --pretty=oneline | grep "Modify A" | wc -l) &&
- test 1 = $(git rev-list --all --pretty=oneline | grep "Merge commit" | wc -l)
+ test 1 = $(git rev-list --all --pretty=oneline | grep "Merge remote branch " | wc -l)
)
'
'
. ./test-lib.sh
-. ../lib-rebase.sh
+. "$TEST_DIRECTORY"/lib-rebase.sh
set_fake_editor
'
. ./test-lib.sh
-. ../lib-rebase.sh
+. "$TEST_DIRECTORY"/lib-rebase.sh
# Set up branches like this:
# A1---B1---E1---F1---G1
'
test_expect_success 'format-patch from a subdirectory (3)' '
- here="$TEST_DIRECTORY/$test" &&
rm -f 0* &&
filename=$(
rm -rf sub &&
mkdir -p sub/dir &&
cd sub/dir &&
- git format-patch -1 -o "$here"
+ git format-patch -1 -o "$TRASH_DIRECTORY"
) &&
basename=$(expr "$filename" : ".*/\(.*\)") &&
test -f "$basename"
git update-index --assume-unchanged file &&
echo second >file &&
git diff --cached >actual &&
- test_cmp ../t4020/diff.NUL actual
+ test_cmp "$TEST_DIRECTORY"/t4020/diff.NUL actual
'
test_done
--- /dev/null
+#!/bin/sh
+#
+# Copyright (c) 2009 Junio C Hamano
+
+test_description='git-apply notices removal patches generated by GNU diff'
+
+. ./test-lib.sh
+
+test_expect_success setup '
+ cat <<-EOF >c &&
+ diff -ruN a/file b/file
+ --- a/file TS0
+ +++ b/file TS1
+ @@ -0,0 +1 @@
+ +something
+ EOF
+
+ cat <<-EOF >d &&
+ diff -ruN a/file b/file
+ --- a/file TS0
+ +++ b/file TS1
+ @@ -1 +0,0 @@
+ -something
+ EOF
+
+ timeWest="1982-09-16 07:00:00.000000000 -0800" &&
+ timeGMT="1982-09-16 15:00:00.000000000 +0000" &&
+ timeEast="1982-09-17 00:00:00.000000000 +0900" &&
+
+ epocWest="1969-12-31 16:00:00.000000000 -0800" &&
+ epocGMT="1970-01-01 00:00:00.000000000 +0000" &&
+ epocEast="1970-01-01 09:00:00.000000000 +0900" &&
+
+ sed -e "s/TS0/$epocWest/" -e "s/TS1/$timeWest/" <c >createWest.patch &&
+ sed -e "s/TS0/$epocEast/" -e "s/TS1/$timeEast/" <c >createEast.patch &&
+ sed -e "s/TS0/$epocGMT/" -e "s/TS1/$timeGMT/" <c >createGMT.patch &&
+
+ sed -e "s/TS0/$timeWest/" -e "s/TS1/$timeWest/" <c >addWest.patch &&
+ sed -e "s/TS0/$timeEast/" -e "s/TS1/$timeEast/" <c >addEast.patch &&
+ sed -e "s/TS0/$timeGMT/" -e "s/TS1/$timeGMT/" <c >addGMT.patch &&
+
+ sed -e "s/TS0/$timeWest/" -e "s/TS1/$timeWest/" <d >emptyWest.patch &&
+ sed -e "s/TS0/$timeEast/" -e "s/TS1/$timeEast/" <d >emptyEast.patch &&
+ sed -e "s/TS0/$timeGMT/" -e "s/TS1/$timeGMT/" <d >emptyGMT.patch &&
+
+ sed -e "s/TS0/$timeWest/" -e "s/TS1/$epocWest/" <d >removeWest.patch &&
+ sed -e "s/TS0/$timeEast/" -e "s/TS1/$epocEast/" <d >removeEast.patch &&
+ sed -e "s/TS0/$timeGMT/" -e "s/TS1/$epocGMT/" <d >removeGMT.patch &&
+
+ echo something >something &&
+ >empty
+'
+
+for patch in *.patch
+do
+ test_expect_success "test $patch" '
+ rm -f file .git/index &&
+ case "$patch" in
+ create*)
+ # must be able to create
+ git apply --index $patch &&
+ test_cmp file something &&
+ # must notice the file is already there
+ >file &&
+ git add file &&
+ test_must_fail git apply $patch
+ ;;
+ add*)
+ # must be able to create or patch
+ git apply $patch &&
+ test_cmp file something &&
+ >file &&
+ git apply $patch &&
+ test_cmp file something
+ ;;
+ empty*)
+ # must leave an empty file
+ cat something >file &&
+ git add file &&
+ git apply --index $patch &&
+ test -f file &&
+ test_cmp empty file
+ ;;
+ remove*)
+ # must remove the file
+ cat something >file &&
+ git add file &&
+ git apply --index $patch &&
+ ! test -f file
+ ;;
+ esac
+ '
+done
+
+test_done
git commit -s -F msg &&
git tag second &&
git format-patch --stdout first >patch1 &&
+ {
+ echo "X-Fake-Field: Line One" &&
+ echo "X-Fake-Field: Line Two" &&
+ echo "X-Fake-Field: Line Three" &&
+ git format-patch --stdout first | sed -e "1d"
+ } > patch1.eml &&
sed -n -e "3,\$p" msg >file &&
git add file &&
test_tick &&
test "$(git rev-parse second^)" = "$(git rev-parse HEAD^)"
'
+test_expect_success 'am applies patch e-mail not in a mbox' '
+ git checkout first &&
+ git am patch1.eml &&
+ ! test -d .git/rebase-apply &&
+ test -z "$(git diff second)" &&
+ test "$(git rev-parse second)" = "$(git rev-parse HEAD)" &&
+ test "$(git rev-parse second^)" = "$(git rev-parse HEAD^)"
+'
+
GIT_AUTHOR_NAME="Another Thor"
GIT_AUTHOR_EMAIL="a.thor@example.com"
GIT_COMMITTER_NAME="Co M Miter"
'
cat > expect <<\EOF
-* Merge branch 'reach'
+* Merge commit 'reach'
|\
| \
| \
-*-. \ Merge branches 'octopus-a' and 'octopus-b'
+*-. \ Merge commit 'octopus-a'; commit 'octopus-b'
|\ \ \
* | | | seventh
| | * | octopus-b
'
+test_expect_success 'rebased upstream + fetch + pull --rebase' '
+
+ git update-ref refs/remotes/me/copy copy-orig &&
+ git reset --hard to-rebase-orig &&
+ git checkout --track -b to-rebase3 me/copy &&
+ git reset --hard to-rebase-orig &&
+ git fetch &&
+ git pull --rebase &&
+ test "conflicting modification" = "$(cat file)" &&
+ test file = "$(cat file2)"
+
+'
+
test_expect_success 'pull --rebase dies early with dirty working directory' '
git checkout to-rebase &&
'
+test_expect_success 'pull --rebase works on branch yet to be born' '
+ git rev-parse master >expect &&
+ mkdir empty_repo &&
+ (cd empty_repo &&
+ git init &&
+ git pull --rebase .. master &&
+ git rev-parse HEAD >../actual
+ ) &&
+ test_cmp expect actual
+'
+
test_done
test_must_fail git fsck
'
-test_expect_success 'upload-pack fails due to error in pack-objects' '
+test_expect_success 'upload-pack fails due to error in pack-objects packing' '
! echo "0032want $(git rev-parse HEAD)
00000009done
0000" | git upload-pack . > /dev/null 2> output.err &&
+ grep "unable to read" output.err &&
grep "pack-objects died" output.err
'
'
test_expect_success 'upload-pack fails due to error in rev-list' '
+ ! echo "0032want $(git rev-parse HEAD)
+0034shallow $(git rev-parse HEAD^)00000009done
+0000" | git upload-pack . > /dev/null 2> output.err &&
+ # pack-objects survived
+ grep "Total.*, reused" output.err &&
+ # but there was an error, which must have been in rev-list
+ grep "bad tree object" output.err
+'
+
+test_expect_success 'upload-pack fails due to error in pack-objects enumeration' '
+
! echo "0032want $(git rev-parse HEAD)
00000009done
0000" | git upload-pack . > /dev/null 2> output.err &&
- grep "waitpid (async) failed" output.err
+ grep "bad tree object" output.err &&
+ grep "pack-objects died" output.err
'
test_expect_success 'create empty repository' '
# Another set to demonstrate base between one commit and a merge
# in the documentation.
+#
+# * C (MMC) * B (MMB) * A (MMA)
+# * o * o * o
+# * o * o * o
+# * o * o * o
+# * o | _______/
+# | |/
+# | * 1 (MM1)
+# | _______/
+# |/
+# * root (MMR)
+
test_expect_success 'merge-base for octopus-step (setup)' '
test_tick && git commit --allow-empty -m root && git tag MMR &&
test "$MM1" = "$MB"
'
+test_expect_success 'merge-base A B C using show-branch' '
+ MB=$(git show-branch --merge-base MMA MMB MMC) &&
+ MMR=$(git rev-parse --verify MMR) &&
+ test "$MMR" = "$MB"
+'
+
test_expect_success 'criss-cross merge-base for octopus-step (setup)' '
git reset --hard MMR &&
test_tick && git commit --allow-empty -m 1 && git tag CC1 &&
test_expect_code 1 'Merge with d/f conflicts' 'git merge "merge msg" B master'
+test_expect_failure 'F/D conflict' '
+ git reset --hard &&
+ git checkout master &&
+ rm .git/index &&
+
+ mkdir before &&
+ echo FILE >before/one &&
+ echo FILE >after &&
+ git add . &&
+ git commit -m first &&
+
+ rm -f after &&
+ git mv before after &&
+ git commit -m move &&
+
+ git checkout -b para HEAD^ &&
+ echo COMPLETELY ANOTHER FILE >another &&
+ git add . &&
+ git commit -m para &&
+
+ git merge master
+'
+
test_done
--- /dev/null
+#!/bin/sh
+
+test_description='merging when a directory was replaced with a symlink'
+. ./test-lib.sh
+
+if ! test_have_prereq SYMLINKS
+then
+ say 'Symbolic links not supported, skipping tests.'
+ test_done
+fi
+
+test_expect_success 'create a commit where dir a/b changed to symlink' '
+ mkdir -p a/b/c a/b-2/c &&
+ > a/b/c/d &&
+ > a/b-2/c/d &&
+ > a/x &&
+ git add -A &&
+ git commit -m base &&
+ git tag start &&
+ rm -rf a/b &&
+ ln -s b-2 a/b &&
+ git add -A &&
+ git commit -m "dir to symlink"
+'
+
+test_expect_success 'keep a/b-2/c/d across checkout' '
+ git checkout HEAD^0 &&
+ git reset --hard master &&
+ git rm --cached a/b &&
+ git commit -m "untracked symlink remains" &&
+ git checkout start^0 &&
+ test -f a/b-2/c/d
+'
+
+test_expect_success 'checkout should not have deleted a/b-2/c/d' '
+ git checkout HEAD^0 &&
+ git reset --hard master &&
+ git checkout start^0 &&
+ test -f a/b-2/c/d
+'
+
+test_expect_success 'setup for merge test' '
+ git reset --hard &&
+ test -f a/b-2/c/d &&
+ echo x > a/x &&
+ git add a/x &&
+ git commit -m x &&
+ git tag baseline
+'
+
+test_expect_success 'do not lose a/b-2/c/d in merge (resolve)' '
+ git reset --hard &&
+ git checkout baseline^0 &&
+ git merge -s resolve master &&
+ test -h a/b &&
+ test -f a/b-2/c/d
+'
+
+test_expect_failure 'do not lose a/b-2/c/d in merge (recursive)' '
+ git reset --hard &&
+ git checkout baseline^0 &&
+ git merge -s recursive master &&
+ test -h a/b &&
+ test -f a/b-2/c/d
+'
+
+test_expect_success 'setup a merge where dir a/b-2 changed to symlink' '
+ git reset --hard &&
+ git checkout start^0 &&
+ rm -rf a/b-2 &&
+ ln -s b a/b-2 &&
+ git add -A &&
+ git commit -m "dir a/b-2 to symlink" &&
+ git tag test2
+'
+
+test_expect_failure 'merge should not have conflicts (resolve)' '
+ git reset --hard &&
+ git checkout baseline^0 &&
+ git merge -s resolve test2 &&
+ test -h a/b-2 &&
+ test -f a/b/c/d
+'
+
+test_expect_failure 'merge should not have conflicts (recursive)' '
+ git reset --hard &&
+ git checkout baseline^0 &&
+ git merge -s recursive test2 &&
+ test -h a/b-2 &&
+ test -f a/b/c/d
+'
+
+test_done
--- /dev/null
+#!/bin/sh
+
+test_description='recursive merge corner cases'
+
+. ./test-lib.sh
+
+#
+# L1 L2
+# o---o
+# / \ / \
+# o X ?
+# \ / \ /
+# o---o
+# R1 R2
+#
+
+test_expect_success setup '
+ ten="0 1 2 3 4 5 6 7 8 9"
+ for i in $ten
+ do
+ echo line $i in a sample file
+ done >one &&
+ for i in $ten
+ do
+ echo line $i in another sample file
+ done >two &&
+ git add one two &&
+ test_tick && git commit -m initial &&
+
+ git branch L1 &&
+ git checkout -b R1 &&
+ git mv one three &&
+ test_tick && git commit -m R1 &&
+
+ git checkout L1 &&
+ git mv two three &&
+ test_tick && git commit -m L1 &&
+
+ git checkout L1^0 &&
+ test_tick && git merge -s ours R1 &&
+ git tag L2 &&
+
+ git checkout R1^0 &&
+ test_tick && git merge -s ours L1 &&
+ git tag R2
+'
+
+test_expect_success merge '
+ git reset --hard &&
+ git checkout L2^0 &&
+
+ test_must_fail git merge -s recursive R2^0
+'
+
+test_done
echo foo mmap bar_mmap
echo foo_mmap bar mmap baz
} >file &&
+ echo vvv >v &&
echo ww w >w &&
echo x x xx x >x &&
echo y yy >y &&
echo zzz > z &&
mkdir t &&
echo test >t/t &&
- git add file w x y z t/t hello.c &&
+ echo vvv >t/v &&
+ mkdir t/a &&
+ echo vvv >t/a/v &&
+ git add . &&
test_tick &&
git commit -m initial
'
! git grep -c test $H | grep /dev/null
'
+ test_expect_success "grep --max-depth -1 $L" '
+ {
+ echo ${HC}t/a/v:1:vvv
+ echo ${HC}t/v:1:vvv
+ echo ${HC}v:1:vvv
+ } >expected &&
+ git grep --max-depth -1 -n -e vvv $H >actual &&
+ test_cmp expected actual
+ '
+
+ test_expect_success "grep --max-depth 0 $L" '
+ {
+ echo ${HC}v:1:vvv
+ } >expected &&
+ git grep --max-depth 0 -n -e vvv $H >actual &&
+ test_cmp expected actual
+ '
+
+ test_expect_success "grep --max-depth 0 -- '*' $L" '
+ {
+ echo ${HC}t/a/v:1:vvv
+ echo ${HC}t/v:1:vvv
+ echo ${HC}v:1:vvv
+ } >expected &&
+ git grep --max-depth 0 -n -e vvv $H -- "*" >actual &&
+ test_cmp expected actual
+ '
+
+ test_expect_success "grep --max-depth 1 $L" '
+ {
+ echo ${HC}t/v:1:vvv
+ echo ${HC}v:1:vvv
+ } >expected &&
+ git grep --max-depth 1 -n -e vvv $H >actual &&
+ test_cmp expected actual
+ '
+
+ test_expect_success "grep --max-depth 0 -- t $L" '
+ {
+ echo ${HC}t/v:1:vvv
+ } >expected &&
+ git grep --max-depth 0 -n -e vvv $H -- t >actual &&
+ test_cmp expected actual
+ '
+
done
cat >expected <<EOF
'
chmod 755 foo
+test_expect_success 'nested git work tree' '
+ rm -fr foo bar &&
+ mkdir foo bar &&
+ (
+ cd foo &&
+ git init &&
+ >hello.world
+ git add . &&
+ git commit -a -m nested
+ ) &&
+ (
+ cd bar &&
+ >goodbye.people
+ ) &&
+ git clean -f -d &&
+ test -f foo/.git/index &&
+ test -f foo/hello.world &&
+ ! test -d bar
+'
+
+test_expect_success 'force removal of nested git work tree' '
+ rm -fr foo bar &&
+ mkdir foo bar &&
+ (
+ cd foo &&
+ git init &&
+ >hello.world
+ git add . &&
+ git commit -a -m nested
+ ) &&
+ (
+ cd bar &&
+ >goodbye.people
+ ) &&
+ git clean -f -f -d &&
+ ! test -d foo &&
+ ! test -d bar
+'
+
test_done
--- /dev/null
+#!/bin/sh
+
+test_description='test auto-generated merge messages'
+. ./test-lib.sh
+
+check_oneline() {
+ echo "$1" | sed "s/Q/'/g" >expect &&
+ git log -1 --pretty=tformat:%s >actual &&
+ test_cmp expect actual
+}
+
+test_expect_success 'merge local branch' '
+ test_commit master-1 &&
+ git checkout -b local-branch &&
+ test_commit branch-1 &&
+ git checkout master &&
+ test_commit master-2 &&
+ git merge local-branch &&
+ check_oneline "Merge branch Qlocal-branchQ"
+'
+
+test_expect_success 'merge octopus branches' '
+ git checkout -b octopus-a master &&
+ test_commit octopus-1 &&
+ git checkout -b octopus-b master &&
+ test_commit octopus-2 &&
+ git checkout master &&
+ git merge octopus-a octopus-b &&
+ check_oneline "Merge branches Qoctopus-aQ and Qoctopus-bQ"
+'
+
+test_expect_success 'merge tag' '
+ git checkout -b tag-branch master &&
+ test_commit tag-1 &&
+ git checkout master &&
+ test_commit master-3 &&
+ git merge tag-1 &&
+ check_oneline "Merge commit Qtag-1Q"
+'
+
+test_expect_success 'ambiguous tag' '
+ git checkout -b ambiguous master &&
+ test_commit ambiguous &&
+ git checkout master &&
+ test_commit master-4 &&
+ git merge ambiguous &&
+ check_oneline "Merge commit QambiguousQ"
+'
+
+test_expect_success 'remote branch' '
+ git checkout -b remote master &&
+ test_commit remote-1 &&
+ git update-ref refs/remotes/origin/master remote &&
+ git checkout master &&
+ test_commit master-5 &&
+ git merge origin/master &&
+ check_oneline "Merge remote branch Qorigin/masterQ"
+'
+
+test_done
touch deeply/nested/directory/.keep &&
svn_cmd add deeply &&
svn_cmd up &&
- svn_cmd propset -R svn:ignore 'no-such-file*' .
+ svn_cmd propset -R svn:ignore '
+no-such-file*
+' .
svn_cmd commit -m 'propset svn:ignore'
cd .. &&
git svn show-ignore > show-ignore.got &&
"
cat >prop.expect <<\EOF
+
no-such-file*
EOF
git update-ref refs/remotes/flunk@18 refs/remotes/stunk~2 &&
git update-ref -d refs/remotes/stunk &&
git config --unset svn-remote.svn.fetch stunk &&
- mkdir -p "$GIT_DIR"/svn/flunk@18 &&
- rev_map=$(cd "$GIT_DIR"/svn/stunk && ls .rev_map*) &&
- dd if="$GIT_DIR"/svn/stunk/$rev_map \
- of="$GIT_DIR"/svn/flunk@18/$rev_map bs=24 count=1 &&
- rm -rf "$GIT_DIR"/svn/stunk &&
+ mkdir -p "$GIT_DIR"/svn/refs/remotes/flunk@18 &&
+ rev_map=$(cd "$GIT_DIR"/svn/refs/remotes/stunk && ls .rev_map*) &&
+ dd if="$GIT_DIR"/svn/refs/remotes/stunk/$rev_map \
+ of="$GIT_DIR"/svn/refs/remotes/flunk@18/$rev_map bs=24 count=1 &&
+ rm -rf "$GIT_DIR"/svn/refs/remotes/stunk &&
git svn init --minimize-url -i flunk "$svnrepo"/flunk &&
git svn fetch -i flunk &&
git svn init --minimize-url -i stunk "$svnrepo"/stunk &&
cd .. &&
git svn init "$svnrepo" &&
git svn fetch &&
- mv "$GIT_DIR"/svn/* "$GIT_DIR"/ &&
- mv "$GIT_DIR"/svn/.metadata "$GIT_DIR"/ &&
- rmdir "$GIT_DIR"/svn &&
+ rm -rf "$GIT_DIR"/svn &&
git update-ref refs/heads/git-svn-HEAD refs/${remotes_git_svn} &&
git update-ref refs/heads/svn-HEAD refs/${remotes_git_svn} &&
git update-ref -d refs/${remotes_git_svn} refs/${remotes_git_svn}
git config --add svn-remote.svn.fetch "branches/b:refs/remotes/b" &&
for i in tags/0.1 tags/0.2 tags/0.3; do
git config --add svn-remote.svn.fetch \
- $i:refs/remotes/$i || exit 1; done
+ $i:refs/remotes/$i || exit 1; done &&
+ git config --get-all svn-remote.svn.fetch > fetch.out &&
+ grep "^trunk:refs/remotes/trunk$" fetch.out &&
+ grep "^branches/a:refs/remotes/a$" fetch.out &&
+ grep "^branches/b:refs/remotes/b$" fetch.out &&
+ grep "^tags/0\.1:refs/remotes/tags/0\.1$" fetch.out &&
+ grep "^tags/0\.2:refs/remotes/tags/0\.2$" fetch.out &&
+ grep "^tags/0\.3:refs/remotes/tags/0\.3$" fetch.out &&
+ grep "^:refs/${remotes_git_svn}" fetch.out
'
# refs should all be different, but the trees should all be the same:
rm -rf "$GIT_DIR"/svn &&
for i in `cat fetch.out`; do
path=`expr $i : "\([^:]*\):.*$"`
- ref=`expr $i : "[^:]*:refs/remotes/\(.*\)$"`
+ ref=`expr $i : "[^:]*:\(refs/remotes/.*\)$"`
if test -z "$ref"; then continue; fi
if test -n "$path"; then path="/$path"; fi
( mkdir -p "$GIT_DIR"/svn/$ref/info/ &&
echo "$svnrepo"$path > "$GIT_DIR"/svn/$ref/info/url ) || exit 1;
done &&
git svn migrate --minimize &&
- test -z "`git config -l |grep -v "^svn-remote\.git-svn\."`" &&
+ test -z "`git config -l | grep "^svn-remote\.git-svn\."`" &&
git config --get-all svn-remote.svn.fetch > fetch.out &&
grep "^trunk:refs/remotes/trunk$" fetch.out &&
grep "^branches/a:refs/remotes/a$" fetch.out &&
grep "^branches/b:refs/remotes/b$" fetch.out &&
grep "^tags/0\.1:refs/remotes/tags/0\.1$" fetch.out &&
grep "^tags/0\.2:refs/remotes/tags/0\.2$" fetch.out &&
- grep "^tags/0\.3:refs/remotes/tags/0\.3$" fetch.out
+ grep "^tags/0\.3:refs/remotes/tags/0\.3$" fetch.out &&
grep "^:refs/${remotes_git_svn}" fetch.out
'
test_expect_success ".rev_db auto-converted to .rev_map.UUID" '
git svn fetch -i trunk &&
- test -z "$(ls "$GIT_DIR"/svn/trunk/.rev_db.* 2>/dev/null)" &&
- expect="$(ls "$GIT_DIR"/svn/trunk/.rev_map.*)" &&
+ test -z "$(ls "$GIT_DIR"/svn/refs/remotes/trunk/.rev_db.* 2>/dev/null)" &&
+ expect="$(ls "$GIT_DIR"/svn/refs/remotes/trunk/.rev_map.*)" &&
test -n "$expect" &&
rev_db="$(echo $expect | sed -e "s,_map,_db,")" &&
convert_to_rev_db "$expect" "$rev_db" &&
rm -f "$expect" &&
test -f "$rev_db" &&
git svn fetch -i trunk &&
- test -z "$(ls "$GIT_DIR"/svn/trunk/.rev_db.* 2>/dev/null)" &&
- test ! -e "$GIT_DIR"/svn/trunk/.rev_db &&
+ test -z "$(ls "$GIT_DIR"/svn/refs/remotes/trunk/.rev_db.* 2>/dev/null)" &&
+ test ! -e "$GIT_DIR"/svn/refs/remotes/trunk/.rev_db &&
test -f "$expect"
'
test_expect_success 'clone using git svn' 'git svn clone -s "$svnrepo" x'
test_expect_success 'test that b1 exists and is empty' '
- (cd x && test -f b1 && ! test -s b1)
+ (
+ cd x &&
+ git reset --hard branch-c &&
+ test -f b1 &&
+ ! test -s b1
+ )
'
test_done
test_expect_success 'Fetch repo' 'git svn fetch'
test_expect_success 'make backup copy of unhandled.log' '
- cp .git/svn/git-svn/unhandled.log tmp
+ cp .git/svn/refs/remotes/git-svn/unhandled.log tmp
'
-test_expect_success 'create leftover index' '> .git/svn/git-svn/index'
+test_expect_success 'create leftover index' '> .git/svn/refs/remotes/git-svn/index'
test_expect_success 'git svn gc runs' 'git svn gc'
-test_expect_success 'git svn index removed' '! test -f .git/svn/git-svn/index'
+test_expect_success 'git svn index removed' '! test -f .git/svn/refs/remotes/git-svn/index'
if perl -MCompress::Zlib -e 0 2>/dev/null
then
test_expect_success 'git svn gc produces a valid gzip file' '
- gunzip .git/svn/git-svn/unhandled.log.gz
+ gunzip .git/svn/refs/remotes/git-svn/unhandled.log.gz
'
else
say "Perl Compress::Zlib unavailable, skipping gunzip test"
fi
test_expect_success 'git svn gc does not change unhandled.log files' '
- test_cmp .git/svn/git-svn/unhandled.log tmp/unhandled.log
+ test_cmp .git/svn/refs/remotes/git-svn/unhandled.log tmp/unhandled.log
'
test_done
--- /dev/null
+#!/bin/sh
+#
+# Copyright (c) 2009 Eric Wong
+
+test_description='git svn old rev_map preservd'
+. ./lib-git-svn.sh
+
+test_expect_success 'setup test repository with old layout' '
+ mkdir i &&
+ (cd i && > a) &&
+ svn_cmd import -m- i "$svnrepo" &&
+ git svn init "$svnrepo" &&
+ git svn fetch &&
+ test -d .git/svn/refs/remotes/git-svn/ &&
+ ! test -e .git/svn/git-svn/ &&
+ mv .git/svn/refs/remotes/git-svn .git/svn/ &&
+ rm -r .git/svn/refs
+'
+
+test_expect_success 'old layout continues to work' '
+ svn_cmd import -m- i "$svnrepo/b" &&
+ git svn rebase &&
+ echo a >> b/a &&
+ git add b/a &&
+ git commit -m- -a &&
+ git svn dcommit &&
+ ! test -d .git/svn/refs/ &&
+ test -e .git/svn/git-svn/
+'
+
+test_done
--- /dev/null
+#!/bin/sh
+#
+# Copyright (c) 2009 Eric Wong
+#
+test_description='git svn initial master branch is "trunk" if possible'
+. ./lib-git-svn.sh
+
+test_expect_success 'setup test repository' '
+ mkdir i &&
+ > i/a &&
+ svn_cmd import -m trunk i "$svnrepo/trunk" &&
+ svn_cmd import -m b/a i "$svnrepo/branches/a" &&
+ svn_cmd import -m b/b i "$svnrepo/branches/b"
+'
+
+test_expect_success 'git svn clone --stdlayout sets up trunk as master' '
+ git svn clone -s "$svnrepo" g &&
+ (
+ cd g &&
+ test x`git rev-parse --verify refs/remotes/trunk^0` = \
+ x`git rev-parse --verify refs/heads/master^0`
+ )
+'
+
+test_done
#!/bin/sh
test_description='git cvsimport basic tests'
-. ./test-lib.sh
+. ./lib-cvs.sh
if ! test_have_prereq PERL; then
say 'skipping git cvsimport tests, perl not available'
CVSROOT=$(pwd)/cvsroot
export CVSROOT
-unset CVS_SERVER
-# for clean cvsps cache
-HOME=$(pwd)
-export HOME
-
-if ! type cvs >/dev/null 2>&1
-then
- say 'skipping cvsimport tests, cvs not found'
- test_done
-fi
-
-cvsps_version=`cvsps -h 2>&1 | sed -ne 's/cvsps version //p'`
-case "$cvsps_version" in
-2.1 | 2.2*)
- ;;
-'')
- say 'skipping cvsimport tests, cvsps not found'
- test_done
- ;;
-*)
- say 'skipping cvsimport tests, unsupported cvsps version'
- test_done
- ;;
-esac
-test_expect_success 'setup cvsroot' 'cvs init'
+test_expect_success 'setup cvsroot' '$CVS init'
test_expect_success 'setup a cvs module' '
mkdir "$CVSROOT/module" &&
- cvs co -d module-cvs module &&
+ $CVS co -d module-cvs module &&
cd module-cvs &&
cat <<EOF >o_fortuna &&
O Fortuna
potestatem
dissolvit ut glaciem.
EOF
- cvs add o_fortuna &&
+ $CVS add o_fortuna &&
cat <<EOF >message &&
add "O Fortuna" lyrics
These public domain lyrics make an excellent sample text.
EOF
- cvs commit -F message &&
+ $CVS commit -F message &&
cd ..
'
My Latin is terrible.
EOF
- cvs commit -F message &&
+ $CVS commit -F message &&
cd ..
'
cd module-cvs &&
echo 1 >tick &&
- cvs add tick &&
- cvs commit -m 1
+ $CVS add tick &&
+ $CVS commit -m 1
cd ..
'
test_expect_success 'import from a CVS working tree' '
- cvs co -d import-from-wt module &&
+ $CVS co -d import-from-wt module &&
cd import-from-wt &&
git cvsimport -a -z0 &&
echo 1 >expect &&
'
+test_expect_success 'test entire HEAD' 'test_cmp_branch_tree master'
+
test_done
--- /dev/null
+#!/bin/sh
+
+# Description of the files in the repository:
+#
+# imported-once.txt:
+#
+# Imported once. 1.1 and 1.1.1.1 should be identical.
+#
+# imported-twice.txt:
+#
+# Imported twice. HEAD should reflect the contents of the
+# second import (i.e., have the same contents as 1.1.1.2).
+#
+# imported-modified.txt:
+#
+# Imported, then modified on HEAD. HEAD should reflect the
+# modification.
+#
+# imported-modified-imported.txt:
+#
+# Imported, then modified on HEAD, then imported again.
+#
+# added-imported.txt,v:
+#
+# Added with 'cvs add' to create 1.1, then imported with
+# completely different contents to create 1.1.1.1, therefore the
+# vendor branch was never the default branch.
+#
+# imported-anonymously.txt:
+#
+# Like imported-twice.txt, but with a vendor branch whose branch
+# tag has been removed.
+
+test_description='git cvsimport handling of vendor branches'
+. ./lib-cvs.sh
+
+CVSROOT="$TEST_DIRECTORY"/t9601/cvsroot
+export CVSROOT
+
+test_expect_success 'import a module with a vendor branch' '
+
+ git cvsimport -C module-git module
+
+'
+
+test_expect_success 'check HEAD out of cvs repository' 'test_cvs_co master'
+
+test_expect_success 'check master out of git repository' 'test_git_co master'
+
+test_expect_success 'check a file that was imported once' '
+
+ test_cmp_branch_file master imported-once.txt
+
+'
+
+test_expect_failure 'check a file that was imported twice' '
+
+ test_cmp_branch_file master imported-twice.txt
+
+'
+
+test_expect_success 'check a file that was imported then modified on HEAD' '
+
+ test_cmp_branch_file master imported-modified.txt
+
+'
+
+test_expect_success 'check a file that was imported, modified, then imported again' '
+
+ test_cmp_branch_file master imported-modified-imported.txt
+
+'
+
+test_expect_success 'check a file that was added to HEAD then imported' '
+
+ test_cmp_branch_file master added-imported.txt
+
+'
+
+test_expect_success 'a vendor branch whose tag has been removed' '
+
+ test_cmp_branch_file master imported-anonymously.txt
+
+'
+
+test_done
--- /dev/null
+* -whitespace
--- /dev/null
+history
+val-tags
--- /dev/null
+head 1.1;
+access;
+symbols
+ vtag-4:1.1.1.1
+ vbranchA:1.1.1;
+locks; strict;
+comment @# @;
+
+
+1.1
+date 2004.02.09.15.43.15; author kfogel; state Exp;
+branches
+ 1.1.1.1;
+next ;
+
+1.1.1.1
+date 2004.02.09.15.43.16; author kfogel; state Exp;
+branches;
+next ;
+
+
+desc
+@@
+
+
+1.1
+log
+@Add a file to the working copy.
+@
+text
+@Adding this file, before importing it with different contents.
+@
+
+
+1.1.1.1
+log
+@Import (vbranchA, vtag-4).
+@
+text
+@d1 1
+a1 1
+This is vtag-4 (on vbranchA) of added-then-imported.txt.
+@
+
--- /dev/null
+head 1.1;
+branch 1.1.1;
+access;
+symbols
+ vtag-1:1.1.1.1;
+locks; strict;
+comment @# @;
+
+
+1.1
+date 2004.02.09.15.43.13; author kfogel; state Exp;
+branches
+ 1.1.1.1;
+next ;
+
+1.1.1.1
+date 2004.02.09.15.43.13; author kfogel; state Exp;
+branches;
+next ;
+
+
+desc
+@@
+
+
+1.1
+log
+@Initial revision
+@
+text
+@This is vtag-1 (on vbranchA) of imported-anonymously.txt.
+@
+
+
+1.1.1.1
+log
+@Import (vbranchA, vtag-1).
+@
+text
+@@
+
+
--- /dev/null
+head 1.2;
+access;
+symbols
+ vtag-2:1.1.1.2
+ vtag-1:1.1.1.1
+ vbranchA:1.1.1;
+locks; strict;
+comment @# @;
+
+
+1.2
+date 2004.02.09.15.43.14; author kfogel; state Exp;
+branches;
+next 1.1;
+
+1.1
+date 2004.02.09.15.43.13; author kfogel; state Exp;
+branches
+ 1.1.1.1;
+next ;
+
+1.1.1.1
+date 2004.02.09.15.43.13; author kfogel; state Exp;
+branches;
+next 1.1.1.2;
+
+1.1.1.2
+date 2004.02.09.15.43.13; author kfogel; state Exp;
+branches;
+next ;
+
+
+desc
+@@
+
+
+1.2
+log
+@First regular commit, to imported-modified-imported.txt, on HEAD.
+@
+text
+@This is a modification of imported-modified-imported.txt on HEAD.
+It should supersede the version from the vendor branch.
+@
+
+
+1.1
+log
+@Initial revision
+@
+text
+@d1 2
+a2 1
+This is vtag-1 (on vbranchA) of imported-modified-imported.txt.
+@
+
+
+1.1.1.1
+log
+@Import (vbranchA, vtag-1).
+@
+text
+@@
+
+
+1.1.1.2
+log
+@Import (vbranchA, vtag-2).
+@
+text
+@d1 1
+a1 1
+This is vtag-2 (on vbranchA) of imported-modified-imported.txt.
+@
+
+
--- /dev/null
+head 1.2;
+access;
+symbols
+ vtag-1:1.1.1.1
+ vbranchA:1.1.1;
+locks; strict;
+comment @# @;
+
+
+1.2
+date 2004.02.09.15.43.14; author kfogel; state Exp;
+branches;
+next 1.1;
+
+1.1
+date 2004.02.09.15.43.13; author kfogel; state Exp;
+branches
+ 1.1.1.1;
+next ;
+
+1.1.1.1
+date 2004.02.09.15.43.13; author kfogel; state Exp;
+branches;
+next ;
+
+
+desc
+@@
+
+
+1.2
+log
+@Commit on HEAD.
+@
+text
+@This is a modification of imported-modified.txt on HEAD.
+It should supersede the version from the vendor branch.
+@
+
+
+1.1
+log
+@Initial revision
+@
+text
+@d1 2
+a2 1
+This is vtag-1 (on vbranchA) of imported-modified.txt.
+@
+
+
+1.1.1.1
+log
+@Import (vbranchA, vtag-1).
+@
+text
+@@
+
+
--- /dev/null
+head 1.1;
+branch 1.1.1;
+access;
+symbols
+ vtag-1:1.1.1.1
+ vbranchA:1.1.1;
+locks; strict;
+comment @# @;
+
+
+1.1
+date 2004.02.09.15.43.13; author kfogel; state Exp;
+branches
+ 1.1.1.1;
+next ;
+
+1.1.1.1
+date 2004.02.09.15.43.13; author kfogel; state Exp;
+branches;
+next ;
+
+
+desc
+@@
+
+
+1.1
+log
+@Initial revision
+@
+text
+@This is vtag-1 (on vbranchA) of imported-once.txt.
+@
+
+
+1.1.1.1
+log
+@Import (vbranchA, vtag-1).
+@
+text
+@@
+
+
--- /dev/null
+head 1.1;
+branch 1.1.1;
+access;
+symbols
+ vtag-2:1.1.1.2
+ vtag-1:1.1.1.1
+ vbranchA:1.1.1;
+locks; strict;
+comment @# @;
+
+
+1.1
+date 2004.02.09.15.43.13; author kfogel; state Exp;
+branches
+ 1.1.1.1;
+next ;
+
+1.1.1.1
+date 2004.02.09.15.43.13; author kfogel; state Exp;
+branches;
+next 1.1.1.2;
+
+1.1.1.2
+date 2004.02.09.15.43.13; author kfogel; state Exp;
+branches;
+next ;
+
+
+desc
+@@
+
+
+1.1
+log
+@Initial revision
+@
+text
+@This is vtag-1 (on vbranchA) of imported-twice.txt.
+@
+
+
+1.1.1.1
+log
+@Import (vbranchA, vtag-1).
+@
+text
+@@
+
+
+1.1.1.2
+log
+@Import (vbranchA, vtag-2).
+@
+text
+@d1 1
+a1 1
+This is vtag-2 (on vbranchA) of imported-twice.txt.
+@
+
+
--- /dev/null
+#!/bin/sh
+
+# A description of the repository used for this test can be found in
+# t9602/README.
+
+test_description='git cvsimport handling of branches and tags'
+. ./lib-cvs.sh
+
+CVSROOT="$TEST_DIRECTORY"/t9602/cvsroot
+export CVSROOT
+
+test_expect_success 'import module' '
+
+ git cvsimport -C module-git module
+
+'
+
+test_expect_success 'test branch master' '
+
+ test_cmp_branch_tree master
+
+'
+
+test_expect_success 'test branch vendorbranch' '
+
+ test_cmp_branch_tree vendorbranch
+
+'
+
+test_expect_failure 'test branch B_FROM_INITIALS' '
+
+ test_cmp_branch_tree B_FROM_INITIALS
+
+'
+
+test_expect_failure 'test branch B_FROM_INITIALS_BUT_ONE' '
+
+ test_cmp_branch_tree B_FROM_INITIALS_BUT_ONE
+
+'
+
+test_expect_failure 'test branch B_MIXED' '
+
+ test_cmp_branch_tree B_MIXED
+
+'
+
+test_expect_success 'test branch B_SPLIT' '
+
+ test_cmp_branch_tree B_SPLIT
+
+'
+
+test_expect_failure 'test tag vendortag' '
+
+ test_cmp_branch_tree vendortag
+
+'
+
+test_expect_success 'test tag T_ALL_INITIAL_FILES' '
+
+ test_cmp_branch_tree T_ALL_INITIAL_FILES
+
+'
+
+test_expect_failure 'test tag T_ALL_INITIAL_FILES_BUT_ONE' '
+
+ test_cmp_branch_tree T_ALL_INITIAL_FILES_BUT_ONE
+
+'
+
+test_expect_failure 'test tag T_MIXED' '
+
+ test_cmp_branch_tree T_MIXED
+
+'
+
+
+test_done
--- /dev/null
+This repository is for testing the ability to group revisions
+correctly along tags and branches. Here is its history:
+
+ 1. The initial import (revision 1.1 of everybody) created a
+ directory structure with a file named `default' in each dir:
+
+ ./
+ default
+ sub1/default
+ subsubA/default
+ subsubB/default
+ sub2/default
+ subsubA/default
+ sub3/default
+
+ 2. Then tagged everyone with T_ALL_INITIAL_FILES.
+
+ 3. Then tagged everyone except sub1/subsubB/default with
+ T_ALL_INITIAL_FILES_BUT_ONE.
+
+ 4. Then created branch B_FROM_INITIALS on everyone.
+
+ 5. Then created branch B_FROM_INITIALS_BUT_ONE on everyone except
+ /sub1/subsubB/default.
+
+ 6. Then committed modifications to two files: sub3/default, and
+ sub1/subsubA/default.
+
+ 7. Then committed a modification to all 7 files.
+
+ 8. Then backdated sub3/default to revision 1.2, and
+ sub2/subsubA/default to revision 1.1, and tagged with T_MIXED.
+
+ 9. Same as 8, but tagged with -b to create branch B_MIXED.
+
+ 10. Switched the working copy to B_MIXED, and added
+ sub2/branch_B_MIXED_only. (That's why the RCS file is in
+ sub2/Attic/ -- it never existed on trunk.)
+
+ 11. In one commit, modified default, sub1/default, and
+ sub2/subsubA/default, on branch B_MIXED.
+
+ 12. Did "cvs up -A" on sub2/default, then in one commit, made a
+ change to sub2/default and sub2/branch_B_MIXED_only. So this
+ commit should be spread between the branch and the trunk.
+
+ 13. Do "cvs up -A" to get everyone back to trunk, then make a new
+ branch B_SPLIT on everyone except sub1/subsubB/default,v.
+
+ 14. Switch to branch B_SPLIT (see sub1/subsubB/default disappear)
+ and commit a change that affects everyone except sub3/default.
+
+ 15. An hour or so later, "cvs up -A" to get sub1/subsubB/default
+ back, then commit a change on that file, on trunk. (It's
+ important that this change happened after the previous commits
+ on B_SPLIT.)
+
+ 16. Branch sub1/subsubB/default to B_SPLIT, then "cvs up -r B_SPLIT"
+ to switch the whole working copy to the branch.
+
+ 17. Commit a change on B_SPLIT, to sub1/subsubB/default and
+ sub3/default.
--- /dev/null
+* -whitespace
--- /dev/null
+history
+val-tags
--- /dev/null
+head 1.2;
+access;
+symbols
+ B_SPLIT:1.2.0.4
+ B_MIXED:1.2.0.2
+ T_MIXED:1.2
+ B_FROM_INITIALS_BUT_ONE:1.1.1.1.0.4
+ B_FROM_INITIALS:1.1.1.1.0.2
+ T_ALL_INITIAL_FILES_BUT_ONE:1.1.1.1
+ T_ALL_INITIAL_FILES:1.1.1.1
+ vendortag:1.1.1.1
+ vendorbranch:1.1.1;
+locks; strict;
+comment @# @;
+
+
+1.2
+date 2003.05.23.00.17.53; author jrandom; state Exp;
+branches
+ 1.2.2.1
+ 1.2.4.1;
+next 1.1;
+
+1.1
+date 2003.05.22.23.20.19; author jrandom; state Exp;
+branches
+ 1.1.1.1;
+next ;
+
+1.1.1.1
+date 2003.05.22.23.20.19; author jrandom; state Exp;
+branches;
+next ;
+
+1.2.2.1
+date 2003.05.23.00.31.36; author jrandom; state Exp;
+branches;
+next ;
+
+1.2.4.1
+date 2003.06.03.03.20.31; author jrandom; state Exp;
+branches;
+next ;
+
+
+desc
+@@
+
+
+1.2
+log
+@Second commit to proj, affecting all 7 files.
+@
+text
+@This is the file `default' in the top level of the project.
+
+Every directory in the `proj' project has a file named `default'.
+
+This line was added in the second commit (affecting all 7 files).
+@
+
+
+1.2.4.1
+log
+@First change on branch B_SPLIT.
+
+This change excludes sub3/default, because it was not part of this
+commit, and sub1/subsubB/default, which is not even on the branch yet.
+@
+text
+@a5 2
+
+First change on branch B_SPLIT.
+@
+
+
+1.2.2.1
+log
+@Modify three files, on branch B_MIXED.
+@
+text
+@a5 2
+
+This line was added on branch B_MIXED only (affecting 3 files).
+@
+
+
+1.1
+log
+@Initial revision
+@
+text
+@d4 2
+@
+
+
+1.1.1.1
+log
+@Initial import.
+@
+text
+@@
--- /dev/null
+head 1.2;
+access;
+symbols
+ B_SPLIT:1.2.0.4
+ B_MIXED:1.2.0.2
+ T_MIXED:1.2
+ B_FROM_INITIALS_BUT_ONE:1.1.1.1.0.4
+ B_FROM_INITIALS:1.1.1.1.0.2
+ T_ALL_INITIAL_FILES_BUT_ONE:1.1.1.1
+ T_ALL_INITIAL_FILES:1.1.1.1
+ vendortag:1.1.1.1
+ vendorbranch:1.1.1;
+locks; strict;
+comment @# @;
+
+
+1.2
+date 2003.05.23.00.17.53; author jrandom; state Exp;
+branches
+ 1.2.2.1
+ 1.2.4.1;
+next 1.1;
+
+1.1
+date 2003.05.22.23.20.19; author jrandom; state Exp;
+branches
+ 1.1.1.1;
+next ;
+
+1.1.1.1
+date 2003.05.22.23.20.19; author jrandom; state Exp;
+branches;
+next ;
+
+1.2.2.1
+date 2003.05.23.00.31.36; author jrandom; state Exp;
+branches;
+next ;
+
+1.2.4.1
+date 2003.06.03.03.20.31; author jrandom; state Exp;
+branches;
+next ;
+
+
+desc
+@@
+
+
+1.2
+log
+@Second commit to proj, affecting all 7 files.
+@
+text
+@This is sub1/default.
+
+Every directory in the `proj' project has a file named `default'.
+
+This line was added in the second commit (affecting all 7 files).
+@
+
+
+1.2.4.1
+log
+@First change on branch B_SPLIT.
+
+This change excludes sub3/default, because it was not part of this
+commit, and sub1/subsubB/default, which is not even on the branch yet.
+@
+text
+@a5 2
+
+First change on branch B_SPLIT.
+@
+
+
+1.2.2.1
+log
+@Modify three files, on branch B_MIXED.
+@
+text
+@a5 2
+
+This line was added on branch B_MIXED only (affecting 3 files).
+@
+
+
+1.1
+log
+@Initial revision
+@
+text
+@d4 2
+@
+
+
+1.1.1.1
+log
+@Initial import.
+@
+text
+@@
--- /dev/null
+head 1.3;
+access;
+symbols
+ B_SPLIT:1.3.0.4
+ B_MIXED:1.3.0.2
+ T_MIXED:1.3
+ B_FROM_INITIALS_BUT_ONE:1.1.1.1.0.4
+ B_FROM_INITIALS:1.1.1.1.0.2
+ T_ALL_INITIAL_FILES_BUT_ONE:1.1.1.1
+ T_ALL_INITIAL_FILES:1.1.1.1
+ vendortag:1.1.1.1
+ vendorbranch:1.1.1;
+locks; strict;
+comment @# @;
+
+
+1.3
+date 2003.05.23.00.17.53; author jrandom; state Exp;
+branches
+ 1.3.4.1;
+next 1.2;
+
+1.2
+date 2003.05.23.00.15.26; author jrandom; state Exp;
+branches;
+next 1.1;
+
+1.1
+date 2003.05.22.23.20.19; author jrandom; state Exp;
+branches
+ 1.1.1.1;
+next ;
+
+1.1.1.1
+date 2003.05.22.23.20.19; author jrandom; state Exp;
+branches;
+next ;
+
+1.3.4.1
+date 2003.06.03.03.20.31; author jrandom; state Exp;
+branches;
+next ;
+
+
+desc
+@@
+
+
+1.3
+log
+@Second commit to proj, affecting all 7 files.
+@
+text
+@This is sub1/subsubA/default.
+
+Every directory in the `proj' project has a file named `default'.
+
+This line was added by the first commit (affecting two files).
+
+This line was added in the second commit (affecting all 7 files).
+@
+
+
+1.3.4.1
+log
+@First change on branch B_SPLIT.
+
+This change excludes sub3/default, because it was not part of this
+commit, and sub1/subsubB/default, which is not even on the branch yet.
+@
+text
+@a7 2
+
+First change on branch B_SPLIT.
+@
+
+
+1.2
+log
+@First commit to proj, affecting two files.
+@
+text
+@d6 2
+@
+
+
+1.1
+log
+@Initial revision
+@
+text
+@d4 2
+@
+
+
+1.1.1.1
+log
+@Initial import.
+@
+text
+@@
--- /dev/null
+head 1.3;
+access;
+symbols
+ B_SPLIT:1.3.0.2
+ B_MIXED:1.2.0.2
+ T_MIXED:1.2
+ B_FROM_INITIALS:1.1.1.1.0.2
+ T_ALL_INITIAL_FILES:1.1.1.1
+ vendortag:1.1.1.1
+ vendorbranch:1.1.1;
+locks; strict;
+comment @# @;
+
+
+1.3
+date 2003.06.03.04.29.14; author jrandom; state Exp;
+branches
+ 1.3.2.1;
+next 1.2;
+
+1.2
+date 2003.05.23.00.17.53; author jrandom; state Exp;
+branches;
+next 1.1;
+
+1.1
+date 2003.05.22.23.20.19; author jrandom; state Exp;
+branches
+ 1.1.1.1;
+next ;
+
+1.1.1.1
+date 2003.05.22.23.20.19; author jrandom; state Exp;
+branches;
+next ;
+
+1.3.2.1
+date 2003.06.03.04.33.13; author jrandom; state Exp;
+branches;
+next ;
+
+
+desc
+@@
+
+
+1.3
+log
+@A trunk change to sub1/subsubB/default. This was committed about an
+hour after an earlier change that affected most files on branch
+B_SPLIT. This file is not on that branch yet, but after this commit,
+we'll branch to B_SPLIT, albeit rooted in a revision that didn't exist
+at the time the rest of B_SPLIT was created.
+@
+text
+@This is sub1/subsubB/default.
+
+Every directory in the `proj' project has a file named `default'.
+
+This line was added in the second commit (affecting all 7 files).
+
+This bit was committed on trunk about an hour after an earlier change
+to everyone else on branch B_SPLIT. Afterwards, we'll finally branch
+this file to B_SPLIT, but rooted in a revision that didn't exist at
+the time the rest of B_SPLIT was created.
+@
+
+
+1.3.2.1
+log
+@This change affects sub3/default and sub1/subsubB/default, on branch
+B_SPLIT. Note that the latter file did not even exist on this branch
+until after some other files had had revisions committed on B_SPLIT.
+@
+text
+@a10 4
+
+This change affects sub3/default and sub1/subsubB/default, on branch
+B_SPLIT. Note that the latter file did not even exist on this branch
+until after some other files had had revisions committed on B_SPLIT.
+@
+
+
+1.2
+log
+@Second commit to proj, affecting all 7 files.
+@
+text
+@d6 5
+@
+
+
+1.1
+log
+@Initial revision
+@
+text
+@d4 2
+@
+
+
+1.1.1.1
+log
+@Initial import.
+@
+text
+@@
--- /dev/null
+head 1.1;
+access;
+symbols
+ B_MIXED:1.1.0.2;
+locks; strict;
+comment @# @;
+
+
+1.1
+date 2003.05.23.00.25.26; author jrandom; state dead;
+branches
+ 1.1.2.1;
+next ;
+
+1.1.2.1
+date 2003.05.23.00.25.26; author jrandom; state Exp;
+branches;
+next 1.1.2.2;
+
+1.1.2.2
+date 2003.05.23.00.48.51; author jrandom; state Exp;
+branches;
+next ;
+
+
+desc
+@@
+
+
+1.1
+log
+@file branch_B_MIXED_only was initially added on branch B_MIXED.
+@
+text
+@@
+
+
+1.1.2.1
+log
+@Add a file on branch B_MIXED.
+@
+text
+@a0 1
+This file was added on branch B_MIXED. It never existed on trunk.
+@
+
+
+1.1.2.2
+log
+@A single commit affecting one file on branch B_MIXED and one on trunk.
+@
+text
+@a1 3
+
+The same commit added these two lines here on branch B_MIXED, and two
+similar lines to ./default on trunk.
+@
+
+
--- /dev/null
+head 1.3;
+access;
+symbols
+ B_SPLIT:1.3.0.2
+ B_MIXED:1.2.0.2
+ T_MIXED:1.2
+ B_FROM_INITIALS_BUT_ONE:1.1.1.1.0.4
+ B_FROM_INITIALS:1.1.1.1.0.2
+ T_ALL_INITIAL_FILES_BUT_ONE:1.1.1.1
+ T_ALL_INITIAL_FILES:1.1.1.1
+ vendortag:1.1.1.1
+ vendorbranch:1.1.1;
+locks; strict;
+comment @# @;
+
+
+1.3
+date 2003.05.23.00.48.51; author jrandom; state Exp;
+branches
+ 1.3.2.1;
+next 1.2;
+
+1.2
+date 2003.05.23.00.17.53; author jrandom; state Exp;
+branches;
+next 1.1;
+
+1.1
+date 2003.05.22.23.20.19; author jrandom; state Exp;
+branches
+ 1.1.1.1;
+next ;
+
+1.1.1.1
+date 2003.05.22.23.20.19; author jrandom; state Exp;
+branches;
+next ;
+
+1.3.2.1
+date 2003.06.03.03.20.31; author jrandom; state Exp;
+branches;
+next ;
+
+
+desc
+@@
+
+
+1.3
+log
+@A single commit affecting one file on branch B_MIXED and one on trunk.
+@
+text
+@This is sub2/default.
+
+Every directory in the `proj' project has a file named `default'.
+
+This line was added in the second commit (affecting all 7 files).
+
+The same commit added these two lines here on trunk, and two similar
+lines to ./branch_B_MIXED_only on branch B_MIXED.
+@
+
+
+1.3.2.1
+log
+@First change on branch B_SPLIT.
+
+This change excludes sub3/default, because it was not part of this
+commit, and sub1/subsubB/default, which is not even on the branch yet.
+@
+text
+@a8 2
+
+First change on branch B_SPLIT.
+@
+
+
+1.2
+log
+@Second commit to proj, affecting all 7 files.
+@
+text
+@d6 3
+@
+
+
+1.1
+log
+@Initial revision
+@
+text
+@d4 2
+@
+
+
+1.1.1.1
+log
+@Initial import.
+@
+text
+@@
--- /dev/null
+head 1.2;
+access;
+symbols
+ B_SPLIT:1.2.0.2
+ B_MIXED:1.1.0.2
+ T_MIXED:1.1
+ B_FROM_INITIALS_BUT_ONE:1.1.1.1.0.4
+ B_FROM_INITIALS:1.1.1.1.0.2
+ T_ALL_INITIAL_FILES_BUT_ONE:1.1.1.1
+ T_ALL_INITIAL_FILES:1.1.1.1
+ vendortag:1.1.1.1
+ vendorbranch:1.1.1;
+locks; strict;
+comment @# @;
+
+
+1.2
+date 2003.05.23.00.17.53; author jrandom; state Exp;
+branches
+ 1.2.2.1;
+next 1.1;
+
+1.1
+date 2003.05.22.23.20.19; author jrandom; state Exp;
+branches
+ 1.1.1.1
+ 1.1.2.1;
+next ;
+
+1.1.1.1
+date 2003.05.22.23.20.19; author jrandom; state Exp;
+branches;
+next ;
+
+1.1.2.1
+date 2003.05.23.00.31.36; author jrandom; state Exp;
+branches;
+next ;
+
+1.2.2.1
+date 2003.06.03.03.20.31; author jrandom; state Exp;
+branches;
+next ;
+
+
+desc
+@@
+
+
+1.2
+log
+@Second commit to proj, affecting all 7 files.
+@
+text
+@This is sub2/subsub2/default.
+
+Every directory in the `proj' project has a file named `default'.
+
+This line was added in the second commit (affecting all 7 files).
+@
+
+
+1.2.2.1
+log
+@First change on branch B_SPLIT.
+
+This change excludes sub3/default, because it was not part of this
+commit, and sub1/subsubB/default, which is not even on the branch yet.
+@
+text
+@a5 2
+
+First change on branch B_SPLIT.
+@
+
+
+1.1
+log
+@Initial revision
+@
+text
+@d4 2
+@
+
+
+1.1.2.1
+log
+@Modify three files, on branch B_MIXED.
+@
+text
+@a3 2
+
+This line was added on branch B_MIXED only (affecting 3 files).
+@
+
+
+1.1.1.1
+log
+@Initial import.
+@
+text
+@@
--- /dev/null
+head 1.3;
+access;
+symbols
+ B_SPLIT:1.3.0.2
+ B_MIXED:1.2.0.2
+ T_MIXED:1.2
+ B_FROM_INITIALS_BUT_ONE:1.1.1.1.0.4
+ B_FROM_INITIALS:1.1.1.1.0.2
+ T_ALL_INITIAL_FILES_BUT_ONE:1.1.1.1
+ T_ALL_INITIAL_FILES:1.1.1.1
+ vendortag:1.1.1.1
+ vendorbranch:1.1.1;
+locks; strict;
+comment @# @;
+
+
+1.3
+date 2003.05.23.00.17.53; author jrandom; state Exp;
+branches
+ 1.3.2.1;
+next 1.2;
+
+1.2
+date 2003.05.23.00.15.26; author jrandom; state Exp;
+branches;
+next 1.1;
+
+1.1
+date 2003.05.22.23.20.19; author jrandom; state Exp;
+branches
+ 1.1.1.1;
+next ;
+
+1.1.1.1
+date 2003.05.22.23.20.19; author jrandom; state Exp;
+branches;
+next ;
+
+1.3.2.1
+date 2003.06.03.04.33.13; author jrandom; state Exp;
+branches;
+next ;
+
+
+desc
+@@
+
+
+1.3
+log
+@Second commit to proj, affecting all 7 files.
+@
+text
+@This is sub3/default.
+
+Every directory in the `proj' project has a file named `default'.
+
+This line was added by the first commit (affecting two files).
+
+This line was added in the second commit (affecting all 7 files).
+@
+
+
+1.3.2.1
+log
+@This change affects sub3/default and sub1/subsubB/default, on branch
+B_SPLIT. Note that the latter file did not even exist on this branch
+until after some other files had had revisions committed on B_SPLIT.
+@
+text
+@a7 4
+
+This change affects sub3/default and sub1/subsubB/default, on branch
+B_SPLIT. Note that the latter file did not even exist on this branch
+until after some other files had had revisions committed on B_SPLIT.
+@
+
+
+1.2
+log
+@First commit to proj, affecting two files.
+@
+text
+@d6 2
+@
+
+
+1.1
+log
+@Initial revision
+@
+text
+@d4 2
+@
+
+
+1.1.1.1
+log
+@Initial import.
+@
+text
+@@
--- /dev/null
+#!/bin/sh
+
+# Structure of the test cvs repository
+#
+# Message File:Content Commit Time
+# Rev 1 a: 1.1 2009-02-21 19:11:43 +0100
+# Rev 2 a: 1.2 b: 1.1 2009-02-21 19:11:14 +0100
+# Rev 3 b: 1.2 2009-02-21 19:11:43 +0100
+#
+# As you can see the commit of Rev 3 has the same time as
+# Rev 1 this leads to a broken import because of a cvsps
+# bug.
+
+test_description='git cvsimport testing for correct patchset estimation'
+. ./lib-cvs.sh
+
+CVSROOT="$TEST_DIRECTORY"/t9603/cvsroot
+export CVSROOT
+
+test_expect_failure 'import with criss cross times on revisions' '
+
+ git cvsimport -p"-x" -C module-git module &&
+ cd module-git &&
+ git log --pretty=format:%s > ../actual-master &&
+ git log A~2..A --pretty="format:%s %ad" -- > ../actual-A &&
+ echo "" >> ../actual-master &&
+ echo "" >> ../actual-A &&
+ cd .. &&
+ echo "Rev 4
+Rev 3
+Rev 2
+Rev 1" > expect-master &&
+ test_cmp actual-master expect-master &&
+
+ echo "Rev 5 Branch A Wed Mar 11 19:09:10 2009 +0000
+Rev 4 Branch A Wed Mar 11 19:03:52 2009 +0000" > expect-A &&
+ test_cmp actual-A expect-A
+'
+
+test_done
--- /dev/null
+* -whitespace
--- /dev/null
+history
+val-tags
--- /dev/null
+head 1.2;
+access;
+symbols
+ A:1.2.0.2;
+locks; strict;
+comment @# @;
+
+
+1.2
+date 2009.02.21.18.11.14; author tester; state Exp;
+branches
+ 1.2.2.1;
+next 1.1;
+
+1.1
+date 2009.02.21.18.11.43; author tester; state Exp;
+branches;
+next ;
+
+1.2.2.1
+date 2009.03.11.19.03.52; author tester; state Exp;
+branches;
+next 1.2.2.2;
+
+1.2.2.2
+date 2009.03.11.19.09.10; author tester; state Exp;
+branches;
+next ;
+
+
+desc
+@@
+
+
+1.2
+log
+@Rev 2
+@
+text
+@1.2
+@
+
+
+1.2.2.1
+log
+@Rev 4 Branch A
+@
+text
+@d1 1
+a1 1
+1.2.2.1
+@
+
+
+1.2.2.2
+log
+@Rev 5 Branch A
+@
+text
+@d1 1
+a1 1
+1.2.2.2
+@
+
+
+1.1
+log
+@Rev 1
+@
+text
+@d1 1
+a1 1
+1.1
+@
--- /dev/null
+head 1.3;
+access;
+symbols
+ A:1.2.0.2;
+locks; strict;
+comment @# @;
+
+
+1.3
+date 2009.03.11.19.05.08; author tester; state Exp;
+branches;
+next 1.2;
+
+1.2
+date 2009.02.21.18.11.43; author tester; state Exp;
+branches
+ 1.2.2.1;
+next 1.1;
+
+1.1
+date 2009.02.21.18.11.14; author tester; state Exp;
+branches;
+next ;
+
+1.2.2.1
+date 2009.03.11.19.03.52; author tester; state Exp;
+branches;
+next 1.2.2.2;
+
+1.2.2.2
+date 2009.03.11.19.09.10; author tester; state Exp;
+branches;
+next ;
+
+
+desc
+@@
+
+
+1.3
+log
+@Rev 4
+@
+text
+@1.3
+@
+
+
+1.2
+log
+@Rev 3
+@
+text
+@d1 1
+a1 1
+1.2
+@
+
+
+1.2.2.1
+log
+@Rev 4 Branch A
+@
+text
+@d1 1
+a1 1
+1.2.2.1
+@
+
+
+1.2.2.2
+log
+@Rev 5 Branch A
+@
+text
+@d1 1
+a1 1
+1.2
+@
+
+
+1.1
+log
+@Rev 2
+@
+text
+@d1 1
+a1 1
+1.1
+@
valgrind=t; verbose=t; shift ;;
--tee)
shift ;; # was handled already
+ --root=*)
+ root=$(expr "z$1" : 'z[^=]*=\(.*\)')
+ shift ;;
*)
echo "error: unknown test option '$1'" >&2; exit 1 ;;
esac
# Test repository
test="trash directory.$(basename "$0" .sh)"
-test ! -z "$debug" || remove_trash="$TEST_DIRECTORY/$test"
+test -n "$root" && test="$root/$test"
+case "$test" in
+/*) TRASH_DIRECTORY="$test" ;;
+ *) TRASH_DIRECTORY="$TEST_DIRECTORY/$test" ;;
+esac
+test ! -z "$debug" || remove_trash=$TRASH_DIRECTORY
rm -fr "$test" || {
GIT_EXIT_OK=t
echo >&5 "FATAL: Cannot prepare test area"
{
const char **argv;
int argc;
- int err;
if (flags & TRANSPORT_PUSH_MIRROR)
return error("http transport does not support mirror mode");
while (refspec_nr--)
argv[argc++] = *refspec++;
argv[argc] = NULL;
- err = run_command_v_opt(argv, RUN_GIT_CMD);
- switch (err) {
- case -ERR_RUN_COMMAND_FORK:
- error("unable to fork for %s", argv[0]);
- case -ERR_RUN_COMMAND_EXEC:
- error("unable to exec %s", argv[0]);
- break;
- case -ERR_RUN_COMMAND_WAITPID:
- case -ERR_RUN_COMMAND_WAITPID_WRONG_PID:
- case -ERR_RUN_COMMAND_WAITPID_SIGNAL:
- case -ERR_RUN_COMMAND_WAITPID_NOEXIT:
- error("%s died with strange error", argv[0]);
- }
- return !!err;
+ return !!run_command_v_opt(argv, RUN_GIT_CMD);
}
static struct ref *get_refs_via_curl(struct transport *transport, int for_push)
return (refs ? 0 : -1);
}
+static int push_had_errors(struct ref *ref)
+{
+ for (; ref; ref = ref->next) {
+ switch (ref->status) {
+ case REF_STATUS_NONE:
+ case REF_STATUS_UPTODATE:
+ case REF_STATUS_OK:
+ break;
+ default:
+ return 1;
+ }
+ }
+ return 0;
+}
+
static int refs_pushed(struct ref *ref)
{
for (; ref; ref = ref->next) {
args.force_update = !!(flags & TRANSPORT_PUSH_FORCE);
args.use_thin_pack = data->thin;
args.verbose = !!(flags & TRANSPORT_PUSH_VERBOSE);
+ args.quiet = !!(flags & TRANSPORT_PUSH_QUIET);
args.dry_run = !!(flags & TRANSPORT_PUSH_DRY_RUN);
ret = send_pack(&args, data->fd, data->conn, remote_refs,
struct ref *local_refs = get_local_heads();
int match_flags = MATCH_REFS_NONE;
int verbose = flags & TRANSPORT_PUSH_VERBOSE;
+ int quiet = flags & TRANSPORT_PUSH_QUIET;
int porcelain = flags & TRANSPORT_PUSH_PORCELAIN;
int ret;
ret = transport->push_refs(transport, remote_refs, flags);
- print_push_status(transport->url, remote_refs, verbose | porcelain, porcelain, nonfastforward);
+ if (!quiet || push_had_errors(remote_refs))
+ print_push_status(transport->url, remote_refs,
+ verbose | porcelain, porcelain,
+ nonfastforward);
if (!(flags & TRANSPORT_PUSH_DRY_RUN)) {
struct ref *ref;
#define TRANSPORT_PUSH_MIRROR 8
#define TRANSPORT_PUSH_VERBOSE 16
#define TRANSPORT_PUSH_PORCELAIN 32
+#define TRANSPORT_PUSH_QUIET 64
/* Returns a transport suitable for the url */
struct transport *transport_get(struct remote *, const char *);
};
struct unpack_trees_options {
- unsigned int reset:1,
- merge:1,
- update:1,
- index_only:1,
- nontrivial_merge:1,
- trivial_merges_only:1,
- verbose_update:1,
- aggressive:1,
- skip_unmerged:1,
- initial_checkout:1,
- diff_index_cached:1,
- gently:1;
+ unsigned int reset,
+ merge,
+ update,
+ index_only,
+ nontrivial_merge,
+ trivial_merges_only,
+ verbose_update,
+ aggressive,
+ skip_unmerged,
+ initial_checkout,
+ diff_index_cached,
+ gently;
const char *prefix;
int pos;
struct dir_struct *dir;
static int multi_ack, nr_our_refs;
static int use_thin_pack, use_ofs_delta, use_include_tag;
static int no_progress, daemon_mode;
+static int shallow_nr;
static struct object_array have_obj;
static struct object_array want_obj;
static unsigned int timeout;
struct rev_info revs;
pack_pipe = fdopen(fd, "w");
- if (create_full_pack)
- use_thin_pack = 0; /* no point doing it */
init_revisions(&revs, NULL);
revs.tag_objects = 1;
revs.tree_objects = 1;
const char *argv[10];
int arg = 0;
- rev_list.proc = do_rev_list;
- /* .data is just a boolean: any non-NULL value will do */
- rev_list.data = create_full_pack ? &rev_list : NULL;
- if (start_async(&rev_list))
- die("git upload-pack: unable to fork git-rev-list");
+ if (shallow_nr) {
+ rev_list.proc = do_rev_list;
+ rev_list.data = 0;
+ if (start_async(&rev_list))
+ die("git upload-pack: unable to fork git-rev-list");
+ argv[arg++] = "pack-objects";
+ } else {
+ argv[arg++] = "pack-objects";
+ argv[arg++] = "--revs";
+ if (create_full_pack)
+ argv[arg++] = "--all";
+ else if (use_thin_pack)
+ argv[arg++] = "--thin";
+ }
- argv[arg++] = "pack-objects";
argv[arg++] = "--stdout";
if (!no_progress)
argv[arg++] = "--progress";
argv[arg++] = NULL;
memset(&pack_objects, 0, sizeof(pack_objects));
- pack_objects.in = rev_list.out; /* start_command closes it */
+ pack_objects.in = shallow_nr ? rev_list.out : -1;
pack_objects.out = -1;
pack_objects.err = -1;
pack_objects.git_cmd = 1;
if (start_command(&pack_objects))
die("git upload-pack: unable to fork git-pack-objects");
+ /* pass on revisions we (don't) want */
+ if (!shallow_nr) {
+ FILE *pipe_fd = fdopen(pack_objects.in, "w");
+ if (!create_full_pack) {
+ int i;
+ for (i = 0; i < want_obj.nr; i++)
+ fprintf(pipe_fd, "%s\n", sha1_to_hex(want_obj.objects[i].item->sha1));
+ fprintf(pipe_fd, "--not\n");
+ for (i = 0; i < have_obj.nr; i++)
+ fprintf(pipe_fd, "%s\n", sha1_to_hex(have_obj.objects[i].item->sha1));
+ }
+
+ fprintf(pipe_fd, "\n");
+ fflush(pipe_fd);
+ fclose(pipe_fd);
+ }
+
+
/* We read from pack_objects.err to capture stderr output for
* progress bar, and pack_objects.out to capture the pack data.
*/
error("git upload-pack: git-pack-objects died with error.");
goto fail;
}
- if (finish_async(&rev_list))
+ if (shallow_nr && finish_async(&rev_list))
goto fail; /* error was already reported */
/* flush the data */
static char line[1000];
int len, depth = 0;
+ shallow_nr = 0;
if (debug_fd)
write_in_full(debug_fd, "#S\n", 3);
for (;;) {
packet_write(1, "shallow %s",
sha1_to_hex(object->sha1));
register_shallow(object->sha1);
+ shallow_nr++;
}
result = result->next;
}
for (i = 0; i < shallows.nr; i++)
register_shallow(shallows.objects[i].item->sha1);
}
+
+ shallow_nr += shallows.nr;
free(shallows.objects);
}
