#
# For asciidoc ...
-# -7.1.2, no extra settings are needed.
-# 8.0-, set ASCIIDOC8.
+# -7.1.2, set ASCIIDOC7
+# 8.0-, no extra settings are needed
#
#
# For docbook-xsl ...
-# -1.68.1, set ASCIIDOC_NO_ROFF? (based on changelog from 1.73.0)
-# 1.69.0, no extra settings are needed?
+# -1.68.1, no extra settings are needed?
+# 1.69.0, set ASCIIDOC_ROFF?
# 1.69.1-1.71.0, set DOCBOOK_SUPPRESS_SP?
-# 1.71.1, no extra settings are needed?
+# 1.71.1, set ASCIIDOC_ROFF?
# 1.72.0, set DOCBOOK_XSL_172.
-# 1.73.0-, set ASCIIDOC_NO_ROFF
+# 1.73.0-, no extra settings are needed
#
-#
-# If you had been using DOCBOOK_XSL_172 in an attempt to get rid
-# of 'the ".ft C" problem' in your generated manpages, and you
-# instead ended up with weird characters around callouts, try
-# using ASCIIDOC_NO_ROFF instead (it works fine with ASCIIDOC8).
-#
-
-ifdef ASCIIDOC8
+ifndef ASCIIDOC7
ASCIIDOC_EXTRA += -a asciidoc7compatible -a no-inline-literal
endif
ifdef DOCBOOK_XSL_172
ASCIIDOC_EXTRA += -a git-asciidoc-no-roff
MANPAGE_XSL = manpage-1.72.xsl
else
- ifdef ASCIIDOC_NO_ROFF
+ ifndef ASCIIDOC_ROFF
# docbook-xsl after 1.72 needs the regular XSL, but will not
# pass-thru raw roff codes from asciidoc.conf, so turn them off.
ASCIIDOC_EXTRA += -a git-asciidoc-no-roff
--- /dev/null
+Git v1.6.4.5 Release Notes
+==========================
+
+Fixes since v1.6.4.4
+--------------------
+
+ * Simplified base85 implementation.
+
+ * An overlong line after ".gitdir: " in a git file caused out of bounds
+ access to an array on the stack.
+
+ * "git count-objects" did not handle packs larger than 4G.
+
+ * "git rev-parse --parseopt --stop-at-non-option" did not stop at non option
+ when --keep-dashdash was in effect.
+
+ * "gitweb" can sometimes be tricked into parrotting a filename argument
+ given in a request without properly quoting.
+
+Other minor fixes and documentation updates are included.
--- /dev/null
+Git v1.6.5.9 Release Notes
+==========================
+
+Fixes since v1.6.5.8
+--------------------
+
+ * An overlong line after ".gitdir: " in a git file caused out of bounds
+ access to an array on the stack.
+
+ * "git blame -L $start,$end" segfaulted when too large $start was given.
+
+ * "git rev-parse --parseopt --stop-at-non-option" did not stop at non option
+ when --keep-dashdash was in effect.
+
+ * "gitweb" can sometimes be tricked into parrotting a filename argument
+ given in a request without properly quoting.
+
+Other minor fixes and documentation updates are included.
--- /dev/null
+Git v1.6.6.3 Release Notes
+==========================
+
+Fixes since v1.6.6.2
+--------------------
+
+ * An overlong line after ".gitdir: " in a git file caused out of bounds
+ access to an array on the stack.
+
+ * "git bisect $path" did not correctly diagnose an error when given a
+ non-existent path.
+
+ * "git blame -L $start,$end" segfaulted when too large $start was given.
+
+ * "git imap-send" did not write draft box with CRLF line endings per RFC.
+
+ * "git rev-parse --parseopt --stop-at-non-option" did not stop at non option
+ when --keep-dashdash was in effect.
+
+ * "gitweb" can sometimes be tricked into parrotting a filename argument
+ given in a request without properly quoting.
+
+Other minor fixes and documentation updates are included.
--- /dev/null
+Git v1.7.0.9 Release Notes
+==========================
+
+Fixes since v1.7.0.8
+--------------------
+
+ * "gitweb" can sometimes be tricked into parrotting a filename argument
+ given in a request without properly quoting.
--- /dev/null
+Git v1.7.1.4 Release Notes
+==========================
+
+Fixes since v1.7.1.3
+--------------------
+
+ * "gitweb" can sometimes be tricked into parrotting a filename argument
+ given in a request without properly quoting.
--- /dev/null
+Git v1.7.2.5 Release Notes
+==========================
+
+Fixes since v1.7.2.4
+--------------------
+
+ * "gitweb" can sometimes be tricked into parrotting a filename argument
+ given in a request without properly quoting.
colon between the hours and minutes part (e.g. "-08:00" instead of
"-0800").
+ * "git checkout" removed an untracked file "foo" from the working
+ tree when switching to a branch that contains a tracked path
+ "foo/bar". Prevent this, just like the case where the conflicting
+ path were "foo" (c752e7f..7980872d).
+
* "git cherry-pick" or "git revert" refused to work when a path that
would be modified by the operation was stat-dirty without a real
difference in the contents of the file.
* "git diff --check" reported an incorrect line number for added
blank lines at the end of file.
+ * "git imap-send" failed to build under NO_OPENSSL.
+
* Setting log.decorate configuration variable to "0" or "1" to mean
"false" or "true" did not work.
+ * "git push" over dumb HTTP protocol did not work against WebDAV
+ servers that did not terminate a collection name with a slash.
+
* "git tag -v" did not work with GPG signatures in rfc1991 mode.
* The post-receive-email sample hook was accidentally broken in 1.7.3.3
update.
+ * "gitweb" can sometimes be tricked into parrotting a filename argument
+ given in a request without properly quoting.
+
Other minor fixes and documentation updates are also included.
Updates since v1.7.3
--------------------
+ * The documentation Makefile now assumes by default asciidoc 8 and
+ docbook-xsl >= 1.73. If you have older versions, you can set
+ ASCIIDOC7 and ASCIIDOC_ROFF, respectively.
+
* The option parsers of various commands that create new branch (or
rename existing ones to a new name) were too loose and users were
allowed to call a branch with a name that begins with a dash by
* Bash completion script in contrib/ has been adjusted to be also
usable by zsh.
+ * Different pagers can be chosen depending on which subcommand is
+ being run under the pager, using "pager.<subcommand>" variable.
+
+ * The hardcoded tab-width of 8 used in whitespace breakage checks is now
+ configurable via the attributes mechanism.
+
+ * Support of case insensitive filesystems (i.e. "core.ignorecase") has
+ been improved. For example, the gitignore mechanism didn't pay attention
+ to the case insensitivity.
+
+ * The <tree>:<path> syntax to name a blob in a tree, and :<path>
+ syntax to name a blob in the index (e.g. "master:Makefile",
+ ":hello.c") have been extended. You can start <path> with "./" to
+ implicitly have the (sub)directory you are in prefixed to the
+ lookup. Similarly, ":../Makefile" from a subdirectory would mean
+ "the Makefile of the parent directory in the index".
+
* "git blame" learned --show-email option to display the e-mail
addresses instead of the names of authors.
+ * "git commit" learned --fixup and --squash options to help later invocation
+ of the interactive rebase.
+
* "git daemon" can be built in MinGW environment.
* "git daemon" can take more than one --listen option to listen to
multiple addresses.
+ * "git describe --exact-match" was optimized not to read commit
+ objects unnecessarily.
+
* "git diff" and "git grep" learned how functions and subroutines
in Fortran look like.
+ * "git fetch" learned "--recurse-submodules" option.
+
* "git mergetool" tells vim/gvim to show three-way diff by default
(use vimdiff2/gvimdiff2 as the tool name for old behaviour).
git-only login over ssh as login shell, with custom set of
commands.
+ * The current branch name in "git status" output can be colored differently
+ from the generic header color by setting "color.status.branch" variable.
+
* "git submodule sync" updates metainformation for all submodules,
not just the ones that have been checked out.
* gitweb can use custom 'highlight' command with its configuration file.
+ * other gitweb updates.
+
Also contains various documentation updates.
All of the fixes in v1.7.3.X maintenance series are included in this
release, unless otherwise noted.
- * "git checkout" removed an untracked file "foo" from the working
- tree when switching to a branch that contains a tracked path
- "foo/bar". Prevent this, just like the case where the conflicting
- path were "foo" (c752e7f..7980872d).
-
* "git log --author=me --author=her" did not find commits written by
me or by her; instead it looked for commits written by me and by
her, which is impossible.
---
exec >/var/tmp/1
-O=v1.7.3.2-450-g5b9c331
+O=v1.7.3.4-567-g38a5932
echo O=$(git describe master)
git shortlog --no-merges ^maint ^$O master
part of the line terminator, i.e. with it, `trailing-space`
does not trigger if the character before such a carriage-return
is not a whitespace (not enabled by default).
+* `tabwidth=<n>` tells how many character positions a tab occupies; this
+ is relevant for `indent-with-non-tab` and when git fixes `tab-in-indent`
+ errors. The default tab width is 8. Allowed values are 1 to 63.
core.fsyncobjectfiles::
This boolean will enable 'fsync()' when writing object files.
one of `header` (the header text of the status message),
`added` or `updated` (files which are added but not committed),
`changed` (files which are changed but not added in the index),
- `untracked` (files which are not tracked by git), or
+ `untracked` (files which are not tracked by git),
+ `branch` (the current branch), or
`nobranch` (the color the 'no branch' warning is shown in, defaulting
to red). The values of these variables may be specified as in
color.branch.<slot>.
sequences that match the regular expression are "words", all other
characters are *ignorable* whitespace.
+fetch.recurseSubmodules::
+ A boolean value which changes the behavior for fetch and pull, the
+ default is to not recursively fetch populated sumodules unless
+ configured otherwise.
+
fetch.unpackLimit::
If the number of objects fetched over the git native
transfer is below this
Running `git pack-refs` in a repository renders it
unclonable by Git versions prior to 1.5.1.2 over dumb
transports such as HTTP. This variable determines whether
- 'git gc' runs `git pack-refs`. This can be set to `nobare`
+ 'git gc' runs `git pack-refs`. This can be set to `notbare`
to enable it within all non-bare repos or it can be set to a
boolean value. The default is `true`.
URL and other values found in the `.gitmodules` file. See
linkgit:git-submodule[1] and linkgit:gitmodules[5] for details.
+submodule.<name>.fetchRecurseSubmodules::
+ This option can be used to enable/disable recursive fetching of this
+ submodule. It can be overriden by using the --[no-]recurse-submodules
+ command line option to "git fetch" and "git pull".
+ This setting will override that from in the linkgit:gitmodules[5]
+ file.
+
submodule.<name>.ignore::
Defines under what circumstances "git status" and the diff family show
a submodule as modified. When set to "all", it will never be considered
another file.
-M[<n>]::
---detect-renames[=<n>]::
+--find-renames[=<n>]::
ifndef::git-log[]
Detect renames.
endif::git-log[]
hasn't changed.
-C[<n>]::
---detect-copies[=<n>]::
+--find-copies[=<n>]::
Detect copies as well as renames. See also `--find-copies-harder`.
If `n` is specified, it has the same meaning as for `-M<n>`.
linkgit:git-config[1].
endif::git-pull[]
+--[no-]recurse-submodules::
+ This option controls if new commits of all populated submodules should
+ be fetched too (see linkgit:git-config[1] and linkgit:gitmodules[5]).
+
+ifndef::git-pull[]
+--submodule-prefix=<path>::
+ Prepend <path> to paths printed in informative messages
+ such as "Fetching submodule foo". This option is used
+ internally when recursing over submodules.
+endif::git-pull[]
+
-u::
--update-head-ok::
By default 'git fetch' refuses to update the head which
variables available: `$LOCAL` is set to the name of the temporary
file containing the contents of the diff pre-image and `$REMOTE`
is set to the name of the temporary file containing the contents
-of the diff post-image. `$BASE` is provided for compatibility
-with custom merge tool commands and has the same value as `$LOCAL`.
+of the diff post-image. `$MERGED` is the name of the file which is
+being compared. `$BASE` is provided for compatibility
+with custom merge tool commands and has the same value as `$MERGED`.
-x <command>::
--extcmd=<command>::
Specify a custom command for viewing diffs.
'git-difftool' ignores the configured defaults and runs
`$command $LOCAL $REMOTE` when this option is specified.
+ Additionally, `$BASE` is set in the environment.
-g::
--gui::
--(no-)-relative-marks= with the --(import|export)-marks=
options.
+--cat-blob-fd=<fd>::
+ Specify the file descriptor that will be written to
+ when the `cat-blob` command is encountered in the stream.
+ The default behaviour is to write to `stdout`.
+
--export-pack-edges=<file>::
After creating a packfile, print a line of data to
<file> listing the filename of the packfile and the last
standard output. This command is optional and is not needed
to perform an import.
+`cat-blob`::
+ Causes fast-import to print a blob in 'cat-file --batch'
+ format to the file descriptor set with `--cat-blob-fd` or
+ `stdout` if unspecified.
+
`feature`::
Require that fast-import supports the specified feature, or
abort if it does not.
inform the reader when the `checkpoint` has been completed and it
can safely access the refs that fast-import updated.
-`feature`
-~~~~~~~~~
-Require that fast-import supports the specified feature, or abort if
-it does not.
+`cat-blob`
+~~~~~~~~~~
+Causes fast-import to print a blob to a file descriptor previously
+arranged with the `--cat-blob-fd` argument. The command otherwise
+has no impact on the current import; its main purpose is to
+retrieve blobs that may be in fast-import's memory but not
+accessible from the target repository.
....
- 'feature' SP <feature> LF
+ 'cat-blob' SP <dataref> LF
....
-The <feature> part of the command may be any string matching
-^[a-zA-Z][a-zA-Z-]*$ and should be understood by fast-import.
+The `<dataref>` can be either a mark reference (`:<idnum>`)
+set previously or a full 40-byte SHA-1 of a Git blob, preexisting or
+ready to be written.
-Feature work identical as their option counterparts with the
-exception of the import-marks feature, see below.
+output uses the same format as `git cat-file --batch`:
-The following features are currently supported:
+====
+ <sha1> SP 'blob' SP <size> LF
+ <contents> LF
+====
-* date-format
-* import-marks
-* export-marks
-* relative-marks
-* no-relative-marks
-* force
+This command can be used anywhere in the stream that comments are
+accepted. In particular, the `cat-blob` command can be used in the
+middle of a commit but not in the middle of a `data` command.
-The import-marks behaves differently from when it is specified as
-commandline option in that only one "feature import-marks" is allowed
-per stream. Also, any --import-marks= specified on the commandline
-will override those from the stream (if any).
+`feature`
+~~~~~~~~~
+Require that fast-import supports the specified feature, or abort if
+it does not.
+
+....
+ 'feature' SP <feature> ('=' <argument>)? LF
+....
+
+The <feature> part of the command may be any one of the following:
+
+date-format::
+export-marks::
+relative-marks::
+no-relative-marks::
+force::
+ Act as though the corresponding command-line option with
+ a leading '--' was passed on the command line
+ (see OPTIONS, above).
+
+import-marks::
+ Like --import-marks except in two respects: first, only one
+ "feature import-marks" command is allowed per stream;
+ second, an --import-marks= command-line option overrides
+ any "feature import-marks" command in the stream.
+
+cat-blob::
+ Ignored. Versions of fast-import not supporting the
+ "cat-blob" command will exit with a message indicating so.
+ This lets the import error out early with a clear message,
+ rather than wasting time on the early part of an import
+ before the unsupported command is detected.
`option`
~~~~~~~~
* date-format
* import-marks
* export-marks
+* cat-blob-fd
* force
Crash Reports
projects with 2,000+ branches and 45,114+ files in a very limited
memory footprint (less than 2.7 MiB per active branch).
+Signals
+-------
+Sending *SIGUSR1* to the 'git fast-import' process ends the current
+packfile early, simulating a `checkpoint` command. The impatient
+operator can use this facility to peek at the objects and refs from an
+import in progress, at the cost of some added running time and worse
+compression.
Author
------
The <type> object <object>, is present in the database but never
'directly' used. A dangling commit could be a root node.
-warning: git-fsck: tree <tree> has full pathnames in it::
- And it shouldn't...
-
sha1 mismatch <object>::
The database has an object who's sha1 doesn't match the
database value.
kept. This defaults to 15 days.
The optional configuration variable 'gc.packrefs' determines if
-'git gc' runs 'git pack-refs'. This can be set to "nobare" to enable
+'git gc' runs 'git pack-refs'. This can be set to "notbare" to enable
it within all non-bare repos or it can be set to a boolean value.
This defaults to true.
fetched, the rebase uses that information to avoid rebasing
non-local changes.
+
-See `branch.<name>.rebase` in linkgit:git-config[1] if you want to make
-`git pull` always use `{litdd}rebase` instead of merging.
+See `branch.<name>.rebase` and `branch.autosetuprebase` in
+linkgit:git-config[1] if you want to make `git pull` always use
+`{litdd}rebase` instead of merging.
+
[NOTE]
This is a potentially _dangerous_ mode of operation.
--no-verify::
This option bypasses the pre-rebase hook. See also linkgit:githooks[5].
+--verify::
+ Allows the pre-rebase hook to run, which is the default. This option can
+ be used to override --no-verify. See also linkgit:githooks[5].
+
-C<n>::
Ensure at least <n> lines of surrounding context match before
and after each change. When fewer lines of surrounding
* firefox (this is the default under X Window when not using KDE)
* iceweasel
+* seamonkey
+* iceape
+* chromium (also supported as chromium-browser)
+* google-chrome (also supported as chrome)
* konqueror (this is the default under KDE, see 'Note about konqueror' below)
+* opera
* w3m (this is the default outside graphical environments)
+* elinks
* links
* lynx
* dillo
branch of the `git.git` repository.
Documentation for older releases are available here:
-* link:v1.7.3.3/git.html[documentation for release 1.7.3.3]
+* link:v1.7.3.4/git.html[documentation for release 1.7.3.4]
* release notes for
+ link:RelNotes/1.7.3.4.txt[1.7.3.4],
link:RelNotes/1.7.3.3.txt[1.7.3.3],
link:RelNotes/1.7.3.2.txt[1.7.3.2],
link:RelNotes/1.7.3.1.txt[1.7.3.1],
link:RelNotes/1.7.3.txt[1.7.3].
-* link:v1.7.2.4/git.html[documentation for release 1.7.2.4]
+* link:v1.7.2.5/git.html[documentation for release 1.7.2.5]
* release notes for
+ link:RelNotes/1.7.2.5.txt[1.7.2.5],
link:RelNotes/1.7.2.4.txt[1.7.2.4],
link:RelNotes/1.7.2.3.txt[1.7.2.3],
link:RelNotes/1.7.2.2.txt[1.7.2.2],
link:RelNotes/1.7.2.1.txt[1.7.2.1],
link:RelNotes/1.7.2.txt[1.7.2].
-* link:v1.7.1.3/git.html[documentation for release 1.7.1.3]
+* link:v1.7.1.4/git.html[documentation for release 1.7.1.4]
* release notes for
+ link:RelNotes/1.7.1.4.txt[1.7.1.4],
link:RelNotes/1.7.1.3.txt[1.7.1.3],
link:RelNotes/1.7.1.2.txt[1.7.1.2],
link:RelNotes/1.7.1.1.txt[1.7.1.1],
link:RelNotes/1.7.1.txt[1.7.1].
-* link:v1.7.0.8/git.html[documentation for release 1.7.0.8]
+* link:v1.7.0.9/git.html[documentation for release 1.7.0.9]
* release notes for
+ link:RelNotes/1.7.0.9.txt[1.7.0.9],
link:RelNotes/1.7.0.8.txt[1.7.0.8],
link:RelNotes/1.7.0.7.txt[1.7.0.7],
link:RelNotes/1.7.0.6.txt[1.7.0.6],
link:RelNotes/1.7.0.1.txt[1.7.0.1],
link:RelNotes/1.7.0.txt[1.7.0].
-* link:v1.6.6.2/git.html[documentation for release 1.6.6.2]
+* link:v1.6.6.3/git.html[documentation for release 1.6.6.3]
* release notes for
+ link:RelNotes/1.6.6.3.txt[1.6.6.3],
link:RelNotes/1.6.6.2.txt[1.6.6.2],
link:RelNotes/1.6.6.1.txt[1.6.6.1],
link:RelNotes/1.6.6.txt[1.6.6].
-* link:v1.6.5.8/git.html[documentation for release 1.6.5.8]
+* link:v1.6.5.9/git.html[documentation for release 1.6.5.9]
* release notes for
+ link:RelNotes/1.6.5.9.txt[1.6.5.9],
link:RelNotes/1.6.5.8.txt[1.6.5.8],
link:RelNotes/1.6.5.7.txt[1.6.5.7],
link:RelNotes/1.6.5.6.txt[1.6.5.6],
link:RelNotes/1.6.5.1.txt[1.6.5.1],
link:RelNotes/1.6.5.txt[1.6.5].
-* link:v1.6.4.4/git.html[documentation for release 1.6.4.4]
+* link:v1.6.4.5/git.html[documentation for release 1.6.4.5]
* release notes for
+ link:RelNotes/1.6.4.5.txt[1.6.4.5],
link:RelNotes/1.6.4.4.txt[1.6.4.4],
link:RelNotes/1.6.4.3.txt[1.6.4.3],
link:RelNotes/1.6.4.2.txt[1.6.4.2],
Set::
Notice all types of potential whitespace errors known to git.
+ The tab width is taken from the value of the `core.whitespace`
+ configuration variable.
Unset::
Unspecified::
- Use the value of `core.whitespace` configuration variable to
+ Use the value of the `core.whitespace` configuration variable to
decide what to notice as error.
String::
Specify a comma separate list of common whitespace problems to
- notice in the same format as `core.whitespace` configuration
+ notice in the same format as the `core.whitespace` configuration
variable.
This config option is overridden if 'git submodule update' is given
the '--merge' or '--rebase' options.
+submodule.<name>.fetchRecurseSubmodules::
+ This option can be used to enable/disable recursive fetching of this
+ submodule. If this option is also present in the submodules entry in
+ .git/config of the superproject, the setting there will override the
+ one found in .gitmodules.
+ Both settings can be overriden on the command line by using the
+ "--[no-]recurse-submodules" option to "git fetch" and "git pull"..
+
submodule.<name>.ignore::
Defines under what circumstances "git status" and the diff family show
a submodule as modified. When set to "all", it will never be considered
':path' (with an empty part before the colon, e.g. `:README`)
is a special case of the syntax described next: content
recorded in the index at the given path.
+ A path starting with './' or '../' is relative to current working directory.
+ The given path will be converted to be relative to working tree's root directory.
+ This is most useful to address a blob or tree from a commit or tree that has
+ the same tree structure with the working tree.
* A colon, optionally followed by a stage number (0 to 3) and a
colon, followed by a path (e.g. `:0:README`); this names a blob object in the
Building and installing the pdf file additionally requires
dblatex. Version 0.2.7 with asciidoc >= 8.2.7 is known to work.
- The documentation is written for AsciiDoc 7, but "make
- ASCIIDOC8=YesPlease doc" will let you format with AsciiDoc 8.
+ The documentation is written for AsciiDoc 7, but by default
+ uses some compatibility wrappers to work on AsciiDoc 8. If you have
+ AsciiDoc 7, try "make ASCIIDOC7=YesPlease".
Alternatively, pre-formatted documentation is available in
"html" and "man" branches of the git repository itself. For
# Define NO_ST_BLOCKS_IN_STRUCT_STAT if your platform does not have st_blocks
# field that counts the on-disk footprint in 512-byte blocks.
#
-# Define ASCIIDOC8 if you want to format documentation with AsciiDoc 8
+# Define ASCIIDOC7 if you want to format documentation with AsciiDoc 7
#
# Define DOCBOOK_XSL_172 if you want to format man pages with DocBook XSL v1.72
# (not v1.73 or v1.71).
#
-# Define ASCIIDOC_NO_ROFF if your DocBook XSL escapes raw roff directives
-# (versions 1.72 and later and 1.68.1 and earlier).
+# Define ASCIIDOC_ROFF if your DocBook XSL does not escape raw roff directives
+# (versions 1.68.1 through v1.72).
#
# Define GNU_ROFF if your target system uses GNU groff. This forces
# apostrophes to be ASCII so that cut&pasting examples to the shell
LIB_H += compat/win32/pthread.h
LIB_H += compat/win32/syslog.h
LIB_H += compat/win32/sys/poll.h
+LIB_H += compat/win32/dirent.h
LIB_H += csum-file.h
LIB_H += decorate.h
LIB_H += delta.h
AR = compat/vcbuild/scripts/lib.pl
CFLAGS =
BASIC_CFLAGS = -nologo -I. -I../zlib -Icompat/vcbuild -Icompat/vcbuild/include -DWIN32 -D_CONSOLE -DHAVE_STRING_H -D_CRT_SECURE_NO_WARNINGS -D_CRT_NONSTDC_NO_DEPRECATE
- COMPAT_OBJS = compat/msvc.o compat/winansi.o compat/win32/pthread.o compat/win32/syslog.o compat/win32/sys/poll.o
+ COMPAT_OBJS = compat/msvc.o compat/winansi.o \
+ compat/win32/pthread.o compat/win32/syslog.o \
+ compat/win32/sys/poll.o compat/win32/dirent.o
COMPAT_CFLAGS = -D__USE_MINGW_ACCESS -DNOGDI -DHAVE_STRING_H -DHAVE_ALLOCA_H -Icompat -Icompat/regex -Icompat/win32 -DSTRIP_EXTENSION=\".exe\"
BASIC_LDFLAGS = -IGNORE:4217 -IGNORE:4049 -NOLOGO -SUBSYSTEM:CONSOLE -NODEFAULTLIB:MSVCRT.lib
- EXTLIBS = advapi32.lib shell32.lib wininet.lib ws2_32.lib
+ EXTLIBS = user32.lib advapi32.lib shell32.lib wininet.lib ws2_32.lib
PTHREAD_LIBS =
lib =
ifndef DEBUG
COMPAT_CFLAGS += -DSTRIP_EXTENSION=\".exe\"
COMPAT_OBJS += compat/mingw.o compat/winansi.o \
compat/win32/pthread.o compat/win32/syslog.o \
- compat/win32/sys/poll.o
+ compat/win32/sys/poll.o compat/win32/dirent.o
EXTLIBS += -lws2_32
PTHREAD_LIBS =
X = .exe
BLK_SHA1 = 1
OPENSSL_LIBSSL =
endif
+ifdef NO_OPENSSL
+ LIB_4_CRYPTO =
+else
ifdef NEEDS_SSL_WITH_CRYPTO
LIB_4_CRYPTO = $(OPENSSL_LINK) -lcrypto -lssl
else
LIB_4_CRYPTO = $(OPENSSL_LINK) -lcrypto
endif
+endif
ifdef NEEDS_LIBICONV
ifdef ICONVDIR
BASIC_CFLAGS += -I$(ICONVDIR)/include
endif
endif
-ifdef ASCIIDOC8
- export ASCIIDOC8
+ifdef ASCIIDOC7
+ export ASCIIDOC7
endif
# Shell quote (do not use $(call) to accommodate ancient setups);
$(QUIET_LINK)$(CC) $(ALL_CFLAGS) -o $@ git.o \
$(BUILTIN_OBJS) $(ALL_LDFLAGS) $(LIBS)
+help.o: common-cmds.h
+
builtin/help.o: common-cmds.h
builtin/help.s builtin/help.o: EXTRA_CPPFLAGS = \
'-DGIT_HTML_PATH="$(htmldir_SQ)"' \
builtin/tar-tree.o archive-tar.o: tar.h
connect.o transport.o http-backend.o: url.h
http-fetch.o http-walker.o remote-curl.o transport.o walker.o: walker.h
-http.o http-walker.o http-push.o http-fetch.o remote-curl.o: http.h
+http.o http-walker.o http-push.o http-fetch.o remote-curl.o: http.h url.h
xdiff-interface.o $(XDIFF_OBJS): \
xdiff/xinclude.h xdiff/xmacros.h xdiff/xdiff.h xdiff/xtypes.h \
save_commit_buffer = 0;
dashdash_pos = 0;
- parse_options_start(&ctx, argc, argv, prefix, PARSE_OPT_KEEP_DASHDASH |
- PARSE_OPT_KEEP_ARGV0);
+ parse_options_start(&ctx, argc, argv, prefix, options,
+ PARSE_OPT_KEEP_DASHDASH | PARSE_OPT_KEEP_ARGV0);
for (;;) {
switch (parse_options_step(&ctx, options, blame_opt_usage)) {
case PARSE_OPT_HELP:
(struct object *)commit, refname);
}
- /* Resize buffer */
- if (ref_list->index >= ref_list->alloc) {
- ref_list->alloc = alloc_nr(ref_list->alloc);
- ref_list->list = xrealloc(ref_list->list,
- ref_list->alloc * sizeof(struct ref_item));
- }
+ ALLOC_GROW(ref_list->list, ref_list->index + 1, ref_list->alloc);
/* Record the new item */
newitem = &(ref_list->list[ref_list->index++]);
OPT_END(),
};
+ if (argc == 2 && !strcmp(argv[1], "-h"))
+ usage_with_options(builtin_branch_usage, options);
+
git_config(git_branch_config, NULL);
if (branch_use_color == -1)
OPT_END()
};
+ if (argc == 2 && !strcmp(argv[1], "-h"))
+ usage_with_options(builtin_checkout_index_usage,
+ builtin_checkout_index_options);
git_config(git_default_config, NULL);
state.base_dir = "";
prefix_length = prefix ? strlen(prefix) : 0;
{
if (!strcasecmp(var+offset, "header"))
return WT_STATUS_HEADER;
+ if (!strcasecmp(var+offset, "branch"))
+ return WT_STATUS_ONBRANCH;
if (!strcasecmp(var+offset, "updated")
|| !strcasecmp(var+offset, "added"))
return WT_STATUS_UPDATED;
OPT_END(),
};
+ if (argc == 2 && !strcmp(argv[1], "-h"))
+ usage_with_options(builtin_status_usage, builtin_status_options);
+
if (null_termination && status_format == STATUS_FORMAT_LONG)
status_format = STATUS_FORMAT_PORCELAIN;
int allow_fast_forward = 1;
struct wt_status s;
+ if (argc == 2 && !strcmp(argv[1], "-h"))
+ usage_with_options(builtin_commit_usage, builtin_commit_options);
+
wt_status_prepare(&s);
git_config(git_commit_config, &s);
in_merge = file_exists(git_path("MERGE_HEAD"));
#include "exec_cmd.h"
#include "parse-options.h"
#include "diff.h"
+#include "hash.h"
#define SEEN (1u<<0)
#define MAX_TAGS (FLAG_BITS - 1)
static int longformat;
static int abbrev = DEFAULT_ABBREV;
static int max_candidates = 10;
-static int found_names;
+static struct hash_table names;
+static int have_util;
static const char *pattern;
static int always;
static const char *dirty;
struct commit_name {
+ struct commit_name *next;
+ unsigned char peeled[20];
struct tag *tag;
unsigned prio:2; /* annotated tag = 2, tag = 1, head = 0 */
unsigned name_checked:1;
unsigned char sha1[20];
- char path[FLEX_ARRAY]; /* more */
+ const char *path;
};
static const char *prio_names[] = {
"head", "lightweight", "annotated",
};
+static inline unsigned int hash_sha1(const unsigned char *sha1)
+{
+ unsigned int hash;
+ memcpy(&hash, sha1, sizeof(hash));
+ return hash;
+}
+
+static inline struct commit_name *find_commit_name(const unsigned char *peeled)
+{
+ struct commit_name *n = lookup_hash(hash_sha1(peeled), &names);
+ while (n && !!hashcmp(peeled, n->peeled))
+ n = n->next;
+ return n;
+}
+
+static int set_util(void *chain)
+{
+ struct commit_name *n;
+ for (n = chain; n; n = n->next) {
+ struct commit *c = lookup_commit_reference_gently(n->peeled, 1);
+ if (c)
+ c->util = n;
+ }
+ return 0;
+}
+
static int replace_name(struct commit_name *e,
int prio,
const unsigned char *sha1,
}
static void add_to_known_names(const char *path,
- struct commit *commit,
+ const unsigned char *peeled,
int prio,
const unsigned char *sha1)
{
- struct commit_name *e = commit->util;
+ struct commit_name *e = find_commit_name(peeled);
struct tag *tag = NULL;
if (replace_name(e, prio, sha1, &tag)) {
- size_t len = strlen(path)+1;
- free(e);
- e = xmalloc(sizeof(struct commit_name) + len);
+ if (!e) {
+ void **pos;
+ e = xmalloc(sizeof(struct commit_name));
+ hashcpy(e->peeled, peeled);
+ pos = insert_hash(hash_sha1(peeled), e, &names);
+ if (pos) {
+ e->next = *pos;
+ *pos = e;
+ } else {
+ e->next = NULL;
+ }
+ }
e->tag = tag;
e->prio = prio;
e->name_checked = 0;
hashcpy(e->sha1, sha1);
- memcpy(e->path, path, len);
- commit->util = e;
+ e->path = path;
}
- found_names = 1;
}
static int get_name(const char *path, const unsigned char *sha1, int flag, void *cb_data)
{
int might_be_tag = !prefixcmp(path, "refs/tags/");
- struct commit *commit;
- struct object *object;
unsigned char peeled[20];
int is_tag, prio;
return 0;
if (!peel_ref(path, peeled) && !is_null_sha1(peeled)) {
- commit = lookup_commit_reference_gently(peeled, 1);
- if (!commit)
- return 0;
- is_tag = !!hashcmp(sha1, commit->object.sha1);
+ is_tag = !!hashcmp(sha1, peeled);
} else {
- commit = lookup_commit_reference_gently(sha1, 1);
- object = parse_object(sha1);
- if (!commit || !object)
- return 0;
- is_tag = object->type == OBJ_TAG;
+ hashcpy(peeled, sha1);
+ is_tag = 0;
}
/* If --all, then any refs are used.
if (!prio)
return 0;
}
- add_to_known_names(all ? path + 5 : path + 10, commit, prio, sha1);
+ add_to_known_names(all ? path + 5 : path + 10, peeled, prio, sha1);
return 0;
}
if (!cmit)
die("%s is not a valid '%s' object", arg, commit_type);
- n = cmit->util;
+ n = find_commit_name(cmit->object.sha1);
if (n && (tags || all || n->prio == 2)) {
/*
* Exact match to an existing ref.
if (debug)
fprintf(stderr, "searching to describe %s\n", arg);
+ if (!have_util) {
+ for_each_hash(&names, set_util);
+ have_util = 1;
+ }
+
list = NULL;
cmit->object.flags = SEEN;
commit_list_insert(cmit, &list);
return cmd_name_rev(i + argc, args, prefix);
}
- for_each_ref(get_name, NULL);
- if (!found_names && !always)
+ init_hash(&names);
+ for_each_rawref(get_name, NULL);
+ if (!names.nr && !always)
die("No names found, cannot describe anything.");
if (argc == 0) {
#include "parse-options.h"
#include "sigchain.h"
#include "transport.h"
+#include "submodule.h"
static const char * const builtin_fetch_usage[] = {
"git fetch [<options>] [<repository> [<refspec>...]]",
TAGS_SET = 2
};
+enum {
+ RECURSE_SUBMODULES_OFF = 0,
+ RECURSE_SUBMODULES_DEFAULT = 1,
+ RECURSE_SUBMODULES_ON = 2
+};
+
static int all, append, dry_run, force, keep, multiple, prune, update_head_ok, verbosity;
-static int progress;
+static int progress, recurse_submodules = RECURSE_SUBMODULES_DEFAULT;
static int tags = TAGS_DEFAULT;
static const char *depth;
static const char *upload_pack;
static struct strbuf default_rla = STRBUF_INIT;
static struct transport *transport;
+static const char *submodule_prefix = "";
static struct option builtin_fetch_options[] = {
OPT__VERBOSITY(&verbosity),
"do not fetch all tags (--no-tags)", TAGS_UNSET),
OPT_BOOLEAN('p', "prune", &prune,
"prune remote-tracking branches no longer on remote"),
+ OPT_SET_INT(0, "recurse-submodules", &recurse_submodules,
+ "control recursive fetching of submodules",
+ RECURSE_SUBMODULES_ON),
OPT_BOOLEAN(0, "dry-run", &dry_run,
"dry run"),
OPT_BOOLEAN('k', "keep", &keep, "keep downloaded pack"),
OPT_BOOLEAN(0, "progress", &progress, "force progress reporting"),
OPT_STRING(0, "depth", &depth, "DEPTH",
"deepen history of shallow clone"),
+ { OPTION_STRING, 0, "submodule-prefix", &submodule_prefix, "DIR",
+ "prepend this to submodule path output", PARSE_OPT_HIDDEN },
OPT_END()
};
return 1;
}
-static int fetch_multiple(struct string_list *list)
+static void add_options_to_argv(int *argc, const char **argv)
{
- int i, result = 0;
- const char *argv[11] = { "fetch", "--append" };
- int argc = 2;
-
if (dry_run)
- argv[argc++] = "--dry-run";
+ argv[(*argc)++] = "--dry-run";
if (prune)
- argv[argc++] = "--prune";
+ argv[(*argc)++] = "--prune";
if (update_head_ok)
- argv[argc++] = "--update-head-ok";
+ argv[(*argc)++] = "--update-head-ok";
if (force)
- argv[argc++] = "--force";
+ argv[(*argc)++] = "--force";
if (keep)
- argv[argc++] = "--keep";
+ argv[(*argc)++] = "--keep";
+ if (recurse_submodules == RECURSE_SUBMODULES_ON)
+ argv[(*argc)++] = "--recurse-submodules";
if (verbosity >= 2)
- argv[argc++] = "-v";
+ argv[(*argc)++] = "-v";
if (verbosity >= 1)
- argv[argc++] = "-v";
+ argv[(*argc)++] = "-v";
else if (verbosity < 0)
- argv[argc++] = "-q";
+ argv[(*argc)++] = "-q";
+
+}
+
+static int fetch_multiple(struct string_list *list)
+{
+ int i, result = 0;
+ const char *argv[12] = { "fetch", "--append" };
+ int argc = 2;
+
+ add_options_to_argv(&argc, argv);
if (!append && !dry_run) {
int errcode = truncate_fetch_head();
}
}
+ if (!result && (recurse_submodules != RECURSE_SUBMODULES_OFF)) {
+ const char *options[10];
+ int num_options = 0;
+ /* Set recursion as default when we already are recursing */
+ if (submodule_prefix[0])
+ set_config_fetch_recurse_submodules(1);
+ gitmodules_config();
+ git_config(submodule_config, NULL);
+ add_options_to_argv(&num_options, options);
+ result = fetch_populated_submodules(num_options, options,
+ submodule_prefix,
+ recurse_submodules == RECURSE_SUBMODULES_ON,
+ verbosity < 0);
+ }
+
/* All names were strdup()ed or strndup()ed */
list.strdup_strings = 1;
string_list_clear(&list, 0);
OPT_END()
};
+ if (argc == 2 && !strcmp(argv[1], "-h"))
+ usage_with_options(builtin_gc_usage, builtin_gc_options);
+
git_config(gc_config, NULL);
if (pack_refs < 0)
if (!use_stdout)
output_directory = set_outdir(prefix, output_directory);
+ else
+ setup_pager();
if (output_directory) {
if (use_stdout)
OPT_END()
};
+ if (argc == 2 && !strcmp(argv[1], "-h"))
+ usage_with_options(ls_files_usage, builtin_ls_files_options);
+
memset(&dir, 0, sizeof(dir));
prefix = cmd_prefix;
if (prefix)
const char *best_strategy = NULL, *wt_strategy = NULL;
struct commit_list **remotes = &remoteheads;
+ if (argc == 2 && !strcmp(argv[1], "-h"))
+ usage_with_options(builtin_merge_usage, builtin_merge_options);
+
/*
* Check if we are _not_ on a detached HEAD, i.e. if there is a
* current branch.
const char **name;
} list;
-static void add_list(const char *name)
-{
- if (list.nr >= list.alloc) {
- list.alloc = alloc_nr(list.alloc);
- list.name = xrealloc(list.name, list.alloc * sizeof(const char *));
- }
- list.name[list.nr++] = name;
-}
-
static int check_local_mod(unsigned char *head, int index_only)
{
/*
struct cache_entry *ce = active_cache[i];
if (!match_pathspec(pathspec, ce->name, ce_namelen(ce), 0, seen))
continue;
- add_list(ce->name);
+ ALLOC_GROW(list.name, list.nr + 1, list.alloc);
+ list.name[list.nr++] = ce->name;
}
if (pathspec) {
git_config(git_default_config, NULL);
shortlog_init(&log);
init_revisions(&rev, prefix);
- parse_options_start(&ctx, argc, argv, prefix, PARSE_OPT_KEEP_DASHDASH |
- PARSE_OPT_KEEP_ARGV0);
+ parse_options_start(&ctx, argc, argv, prefix, options,
+ PARSE_OPT_KEEP_DASHDASH | PARSE_OPT_KEEP_ARGV0);
for (;;) {
switch (parse_options_step(&ctx, options, shortlog_usage)) {
#include "builtin.h"
#include "refs.h"
#include "resolve-undo.h"
+#include "parse-options.h"
/*
* Default to not allowing changes to the list of files. The
strbuf_release(&uq);
}
-static const char update_index_usage[] =
-"git update-index [-q] [--add] [--replace] [--remove] [--unmerged] [--refresh] [--really-refresh] [--cacheinfo] [--chmod=(+|-)x] [--assume-unchanged] [--skip-worktree|--no-skip-worktree] [--info-only] [--force-remove] [--stdin] [--index-info] [--unresolve] [--again | -g] [--ignore-missing] [-z] [--verbose] [--] [<file>...]";
+static const char * const update_index_usage[] = {
+ "git update-index [options] [--] [<file>...]",
+ NULL
+};
static unsigned char head_sha1[20];
static unsigned char merge_head_sha1[20];
return 0;
}
+struct refresh_params {
+ unsigned int flags;
+ int *has_errors;
+};
+
+static int refresh(struct refresh_params *o, unsigned int flag)
+{
+ setup_work_tree();
+ *o->has_errors |= refresh_cache(o->flags | flag);
+ return 0;
+}
+
+static int refresh_callback(const struct option *opt,
+ const char *arg, int unset)
+{
+ return refresh(opt->value, 0);
+}
+
+static int really_refresh_callback(const struct option *opt,
+ const char *arg, int unset)
+{
+ return refresh(opt->value, REFRESH_REALLY);
+}
+
+static int chmod_callback(const struct option *opt,
+ const char *arg, int unset)
+{
+ char *flip = opt->value;
+ if ((arg[0] != '-' && arg[0] != '+') || arg[1] != 'x' || arg[2])
+ return error("option 'chmod' expects \"+x\" or \"-x\"");
+ *flip = arg[0];
+ return 0;
+}
+
+static int resolve_undo_clear_callback(const struct option *opt,
+ const char *arg, int unset)
+{
+ resolve_undo_clear();
+ return 0;
+}
+
+static int cacheinfo_callback(struct parse_opt_ctx_t *ctx,
+ const struct option *opt, int unset)
+{
+ unsigned char sha1[20];
+ unsigned int mode;
+
+ if (ctx->argc <= 3)
+ return error("option 'cacheinfo' expects three arguments");
+ if (strtoul_ui(*++ctx->argv, 8, &mode) ||
+ get_sha1_hex(*++ctx->argv, sha1) ||
+ add_cacheinfo(mode, sha1, *++ctx->argv, 0))
+ die("git update-index: --cacheinfo cannot add %s", *ctx->argv);
+ ctx->argc -= 3;
+ return 0;
+}
+
+static int stdin_cacheinfo_callback(struct parse_opt_ctx_t *ctx,
+ const struct option *opt, int unset)
+{
+ int *line_termination = opt->value;
+
+ if (ctx->argc != 1)
+ return error("option '%s' must be the last argument", opt->long_name);
+ allow_add = allow_replace = allow_remove = 1;
+ read_index_info(*line_termination);
+ return 0;
+}
+
+static int stdin_callback(struct parse_opt_ctx_t *ctx,
+ const struct option *opt, int unset)
+{
+ int *read_from_stdin = opt->value;
+
+ if (ctx->argc != 1)
+ return error("option '%s' must be the last argument", opt->long_name);
+ *read_from_stdin = 1;
+ return 0;
+}
+
+static int unresolve_callback(struct parse_opt_ctx_t *ctx,
+ const struct option *opt, int flags)
+{
+ int *has_errors = opt->value;
+ const char *prefix = startup_info->prefix;
+
+ /* consume remaining arguments. */
+ *has_errors = do_unresolve(ctx->argc, ctx->argv,
+ prefix, prefix ? strlen(prefix) : 0);
+ if (*has_errors)
+ active_cache_changed = 0;
+
+ ctx->argv += ctx->argc - 1;
+ ctx->argc = 1;
+ return 0;
+}
+
+static int reupdate_callback(struct parse_opt_ctx_t *ctx,
+ const struct option *opt, int flags)
+{
+ int *has_errors = opt->value;
+ const char *prefix = startup_info->prefix;
+
+ /* consume remaining arguments. */
+ setup_work_tree();
+ *has_errors = do_reupdate(ctx->argc, ctx->argv,
+ prefix, prefix ? strlen(prefix) : 0);
+ if (*has_errors)
+ active_cache_changed = 0;
+
+ ctx->argv += ctx->argc - 1;
+ ctx->argc = 1;
+ return 0;
+}
+
int cmd_update_index(int argc, const char **argv, const char *prefix)
{
- int i, newfd, entries, has_errors = 0, line_termination = '\n';
- int allow_options = 1;
+ int newfd, entries, has_errors = 0, line_termination = '\n';
int read_from_stdin = 0;
int prefix_length = prefix ? strlen(prefix) : 0;
char set_executable_bit = 0;
- unsigned int refresh_flags = 0;
+ struct refresh_params refresh_args = {0, &has_errors};
int lock_error = 0;
struct lock_file *lock_file;
+ struct parse_opt_ctx_t ctx;
+ int parseopt_state = PARSE_OPT_UNKNOWN;
+ struct option options[] = {
+ OPT_BIT('q', NULL, &refresh_args.flags,
+ "continue refresh even when index needs update",
+ REFRESH_QUIET),
+ OPT_BIT(0, "ignore-submodules", &refresh_args.flags,
+ "refresh: ignore submodules",
+ REFRESH_IGNORE_SUBMODULES),
+ OPT_SET_INT(0, "add", &allow_add,
+ "do not ignore new files", 1),
+ OPT_SET_INT(0, "replace", &allow_replace,
+ "let files replace directories and vice-versa", 1),
+ OPT_SET_INT(0, "remove", &allow_remove,
+ "notice files missing from worktree", 1),
+ OPT_BIT(0, "unmerged", &refresh_args.flags,
+ "refresh even if index contains unmerged entries",
+ REFRESH_UNMERGED),
+ {OPTION_CALLBACK, 0, "refresh", &refresh_args, NULL,
+ "refresh stat information",
+ PARSE_OPT_NOARG | PARSE_OPT_NONEG,
+ refresh_callback},
+ {OPTION_CALLBACK, 0, "really-refresh", &refresh_args, NULL,
+ "like --refresh, but ignore assume-unchanged setting",
+ PARSE_OPT_NOARG | PARSE_OPT_NONEG,
+ really_refresh_callback},
+ {OPTION_LOWLEVEL_CALLBACK, 0, "cacheinfo", NULL,
+ "<mode> <object> <path>",
+ "add the specified entry to the index",
+ PARSE_OPT_NOARG | /* disallow --cacheinfo=<mode> form */
+ PARSE_OPT_NONEG | PARSE_OPT_LITERAL_ARGHELP,
+ (parse_opt_cb *) cacheinfo_callback},
+ {OPTION_CALLBACK, 0, "chmod", &set_executable_bit, "(+/-)x",
+ "override the executable bit of the listed files",
+ PARSE_OPT_NONEG | PARSE_OPT_LITERAL_ARGHELP,
+ chmod_callback},
+ {OPTION_SET_INT, 0, "assume-unchanged", &mark_valid_only, NULL,
+ "mark files as \"not changing\"",
+ PARSE_OPT_NOARG | PARSE_OPT_NONEG, NULL, MARK_FLAG},
+ {OPTION_SET_INT, 0, "no-assume-unchanged", &mark_valid_only, NULL,
+ "clear assumed-unchanged bit",
+ PARSE_OPT_NOARG | PARSE_OPT_NONEG, NULL, UNMARK_FLAG},
+ {OPTION_SET_INT, 0, "skip-worktree", &mark_skip_worktree_only, NULL,
+ "mark files as \"index-only\"",
+ PARSE_OPT_NOARG | PARSE_OPT_NONEG, NULL, MARK_FLAG},
+ {OPTION_SET_INT, 0, "no-skip-worktree", &mark_skip_worktree_only, NULL,
+ "clear skip-worktree bit",
+ PARSE_OPT_NOARG | PARSE_OPT_NONEG, NULL, UNMARK_FLAG},
+ OPT_SET_INT(0, "info-only", &info_only,
+ "add to index only; do not add content to object database", 1),
+ OPT_SET_INT(0, "force-remove", &force_remove,
+ "remove named paths even if present in worktree", 1),
+ OPT_SET_INT('z', NULL, &line_termination,
+ "with --stdin: input lines are terminated by null bytes", '\0'),
+ {OPTION_LOWLEVEL_CALLBACK, 0, "stdin", &read_from_stdin, NULL,
+ "read list of paths to be updated from standard input",
+ PARSE_OPT_NONEG | PARSE_OPT_NOARG,
+ (parse_opt_cb *) stdin_callback},
+ {OPTION_LOWLEVEL_CALLBACK, 0, "index-info", &line_termination, NULL,
+ "add entries from standard input to the index",
+ PARSE_OPT_NONEG | PARSE_OPT_NOARG,
+ (parse_opt_cb *) stdin_cacheinfo_callback},
+ {OPTION_LOWLEVEL_CALLBACK, 0, "unresolve", &has_errors, NULL,
+ "repopulate stages #2 and #3 for the listed paths",
+ PARSE_OPT_NONEG | PARSE_OPT_NOARG,
+ (parse_opt_cb *) unresolve_callback},
+ {OPTION_LOWLEVEL_CALLBACK, 'g', "again", &has_errors, NULL,
+ "only update entries that differ from HEAD",
+ PARSE_OPT_NONEG | PARSE_OPT_NOARG,
+ (parse_opt_cb *) reupdate_callback},
+ OPT_BIT(0, "ignore-missing", &refresh_args.flags,
+ "ignore files missing from worktree",
+ REFRESH_IGNORE_MISSING),
+ OPT_SET_INT(0, "verbose", &verbose,
+ "report actions to standard output", 1),
+ {OPTION_CALLBACK, 0, "clear-resolve-undo", NULL, NULL,
+ "(for porcelains) forget saved unresolved conflicts",
+ PARSE_OPT_NOARG | PARSE_OPT_NONEG,
+ resolve_undo_clear_callback},
+ OPT_END()
+ };
+
+ if (argc == 2 && !strcmp(argv[1], "-h"))
+ usage(update_index_usage[0]);
git_config(git_default_config, NULL);
if (entries < 0)
die("cache corrupted");
- for (i = 1 ; i < argc; i++) {
- const char *path = argv[i];
- const char *p;
+ /*
+ * Custom copy of parse_options() because we want to handle
+ * filename arguments as they come.
+ */
+ parse_options_start(&ctx, argc, argv, prefix,
+ options, PARSE_OPT_STOP_AT_NON_OPTION);
+ while (ctx.argc) {
+ if (parseopt_state != PARSE_OPT_DONE)
+ parseopt_state = parse_options_step(&ctx, options,
+ update_index_usage);
+ if (!ctx.argc)
+ break;
+ switch (parseopt_state) {
+ case PARSE_OPT_HELP:
+ exit(129);
+ case PARSE_OPT_NON_OPTION:
+ case PARSE_OPT_DONE:
+ {
+ const char *path = ctx.argv[0];
+ const char *p;
- if (allow_options && *path == '-') {
- if (!strcmp(path, "--")) {
- allow_options = 0;
- continue;
- }
- if (!strcmp(path, "-q")) {
- refresh_flags |= REFRESH_QUIET;
- continue;
- }
- if (!strcmp(path, "--ignore-submodules")) {
- refresh_flags |= REFRESH_IGNORE_SUBMODULES;
- continue;
- }
- if (!strcmp(path, "--add")) {
- allow_add = 1;
- continue;
- }
- if (!strcmp(path, "--replace")) {
- allow_replace = 1;
- continue;
- }
- if (!strcmp(path, "--remove")) {
- allow_remove = 1;
- continue;
- }
- if (!strcmp(path, "--unmerged")) {
- refresh_flags |= REFRESH_UNMERGED;
- continue;
- }
- if (!strcmp(path, "--refresh")) {
- setup_work_tree();
- has_errors |= refresh_cache(refresh_flags);
- continue;
- }
- if (!strcmp(path, "--really-refresh")) {
- setup_work_tree();
- has_errors |= refresh_cache(REFRESH_REALLY | refresh_flags);
- continue;
- }
- if (!strcmp(path, "--cacheinfo")) {
- unsigned char sha1[20];
- unsigned int mode;
-
- if (i+3 >= argc)
- die("git update-index: --cacheinfo <mode> <sha1> <path>");
-
- if (strtoul_ui(argv[i+1], 8, &mode) ||
- get_sha1_hex(argv[i+2], sha1) ||
- add_cacheinfo(mode, sha1, argv[i+3], 0))
- die("git update-index: --cacheinfo"
- " cannot add %s", argv[i+3]);
- i += 3;
- continue;
- }
- if (!strcmp(path, "--chmod=-x") ||
- !strcmp(path, "--chmod=+x")) {
- if (argc <= i+1)
- die("git update-index: %s <path>", path);
- set_executable_bit = path[8];
- continue;
- }
- if (!strcmp(path, "--assume-unchanged")) {
- mark_valid_only = MARK_FLAG;
- continue;
- }
- if (!strcmp(path, "--no-assume-unchanged")) {
- mark_valid_only = UNMARK_FLAG;
- continue;
- }
- if (!strcmp(path, "--no-skip-worktree")) {
- mark_skip_worktree_only = UNMARK_FLAG;
- continue;
- }
- if (!strcmp(path, "--skip-worktree")) {
- mark_skip_worktree_only = MARK_FLAG;
- continue;
- }
- if (!strcmp(path, "--info-only")) {
- info_only = 1;
- continue;
- }
- if (!strcmp(path, "--force-remove")) {
- force_remove = 1;
- continue;
- }
- if (!strcmp(path, "-z")) {
- line_termination = 0;
- continue;
- }
- if (!strcmp(path, "--stdin")) {
- if (i != argc - 1)
- die("--stdin must be at the end");
- read_from_stdin = 1;
- break;
- }
- if (!strcmp(path, "--index-info")) {
- if (i != argc - 1)
- die("--index-info must be at the end");
- allow_add = allow_replace = allow_remove = 1;
- read_index_info(line_termination);
- break;
- }
- if (!strcmp(path, "--unresolve")) {
- has_errors = do_unresolve(argc - i, argv + i,
- prefix, prefix_length);
- if (has_errors)
- active_cache_changed = 0;
- goto finish;
- }
- if (!strcmp(path, "--again") || !strcmp(path, "-g")) {
- setup_work_tree();
- has_errors = do_reupdate(argc - i, argv + i,
- prefix, prefix_length);
- if (has_errors)
- active_cache_changed = 0;
- goto finish;
- }
- if (!strcmp(path, "--ignore-missing")) {
- refresh_flags |= REFRESH_IGNORE_MISSING;
- continue;
- }
- if (!strcmp(path, "--verbose")) {
- verbose = 1;
- continue;
- }
- if (!strcmp(path, "--clear-resolve-undo")) {
- resolve_undo_clear();
- continue;
- }
- if (!strcmp(path, "-h") || !strcmp(path, "--help"))
- usage(update_index_usage);
- die("unknown option %s", path);
+ setup_work_tree();
+ p = prefix_path(prefix, prefix_length, path);
+ update_one(p, NULL, 0);
+ if (set_executable_bit)
+ chmod_path(set_executable_bit, p);
+ if (p < path || p > path + strlen(path))
+ free((char *)p);
+ ctx.argc--;
+ ctx.argv++;
+ break;
+ }
+ case PARSE_OPT_UNKNOWN:
+ if (ctx.argv[0][1] == '-')
+ error("unknown option '%s'", ctx.argv[0] + 2);
+ else
+ error("unknown switch '%c'", *ctx.opt);
+ usage_with_options(update_index_usage, options);
}
- setup_work_tree();
- p = prefix_path(prefix, prefix_length, path);
- update_one(p, NULL, 0);
- if (set_executable_bit)
- chmod_path(set_executable_bit, p);
- if (p < path || p > path + strlen(path))
- free((char *)p);
}
+ argc = parse_options_end(&ctx);
+
if (read_from_stdin) {
struct strbuf buf = STRBUF_INIT, nbuf = STRBUF_INIT;
strbuf_release(&buf);
}
- finish:
if (active_cache_changed) {
if (newfd < 0) {
- if (refresh_flags & REFRESH_QUIET)
+ if (refresh_args.flags & REFRESH_QUIET)
exit(128);
unable_to_lock_index_die(get_index_file(), lock_error);
}
extern void setup_work_tree(void);
extern const char *setup_git_directory_gently(int *);
extern const char *setup_git_directory(void);
-extern const char *prefix_path(const char *prefix, int len, const char *path);
+extern char *prefix_path(const char *prefix, int len, const char *path);
extern const char *prefix_filename(const char *prefix, int len, const char *path);
extern int check_filename(const char *prefix, const char *name);
extern void verify_filename(const char *prefix, const char *name);
/*
* whitespace rules.
* used by both diff and apply
+ * last two digits are tab width
*/
-#define WS_BLANK_AT_EOL 01
-#define WS_SPACE_BEFORE_TAB 02
-#define WS_INDENT_WITH_NON_TAB 04
-#define WS_CR_AT_EOL 010
-#define WS_BLANK_AT_EOF 020
-#define WS_TAB_IN_INDENT 040
+#define WS_BLANK_AT_EOL 0100
+#define WS_SPACE_BEFORE_TAB 0200
+#define WS_INDENT_WITH_NON_TAB 0400
+#define WS_CR_AT_EOL 01000
+#define WS_BLANK_AT_EOF 02000
+#define WS_TAB_IN_INDENT 04000
#define WS_TRAILING_SPACE (WS_BLANK_AT_EOL|WS_BLANK_AT_EOF)
-#define WS_DEFAULT_RULE (WS_TRAILING_SPACE|WS_SPACE_BEFORE_TAB)
+#define WS_DEFAULT_RULE (WS_TRAILING_SPACE|WS_SPACE_BEFORE_TAB|8)
+#define WS_TAB_WIDTH_MASK 077
extern unsigned whitespace_rule_cfg;
extern unsigned whitespace_rule(const char *);
extern unsigned parse_whitespace_rule(const char *);
extern char *whitespace_error_string(unsigned ws);
extern void ws_fix_copy(struct strbuf *, const char *, int, unsigned, int *);
extern int ws_blank_line(const char *line, int len, unsigned ws_rule);
+#define ws_tab_width(rule) ((rule) & WS_TAB_WIDTH_MASK)
/* ls-files */
int report_path_error(const char *ps_matched, const char **pathspec, int prefix_offset);
/* git.c */
struct startup_info {
int have_repository;
+ const char *prefix;
};
extern struct startup_info *startup_info;
va_end(args);
return r;
}
+
+int color_is_nil(const char *c)
+{
+ return !strcmp(c, "NIL");
+}
#define GIT_COLOR_BG_MAGENTA "\033[45m"
#define GIT_COLOR_BG_CYAN "\033[46m"
+/* A special value meaning "no color selected" */
+#define GIT_COLOR_NIL "NIL"
+
/*
* This variable stores the value of color.ui
*/
__attribute__((format (printf, 3, 4)))
int color_fprintf_ln(FILE *fp, const char *color, const char *fmt, ...);
+int color_is_nil(const char *color);
+
#endif /* COLOR_H */
errno = EINVAL;
return -1;
}
-
-#ifndef NO_MINGW_REPLACE_READDIR
-/* MinGW readdir implementation to avoid extra lstats for Git */
-struct mingw_DIR
-{
- struct _finddata_t dd_dta; /* disk transfer area for this dir */
- struct mingw_dirent dd_dir; /* Our own implementation, including d_type */
- long dd_handle; /* _findnext handle */
- int dd_stat; /* 0 = next entry to read is first entry, -1 = off the end, positive = 0 based index of next entry */
- char dd_name[1]; /* given path for dir with search pattern (struct is extended) */
-};
-
-struct dirent *mingw_readdir(DIR *dir)
-{
- WIN32_FIND_DATAA buf;
- HANDLE handle;
- struct mingw_DIR *mdir = (struct mingw_DIR*)dir;
-
- if (!dir->dd_handle) {
- errno = EBADF; /* No set_errno for mingw */
- return NULL;
- }
-
- if (dir->dd_handle == (long)INVALID_HANDLE_VALUE && dir->dd_stat == 0)
- {
- DWORD lasterr;
- handle = FindFirstFileA(dir->dd_name, &buf);
- lasterr = GetLastError();
- dir->dd_handle = (long)handle;
- if (handle == INVALID_HANDLE_VALUE && (lasterr != ERROR_NO_MORE_FILES)) {
- errno = err_win_to_posix(lasterr);
- return NULL;
- }
- } else if (dir->dd_handle == (long)INVALID_HANDLE_VALUE) {
- return NULL;
- } else if (!FindNextFileA((HANDLE)dir->dd_handle, &buf)) {
- DWORD lasterr = GetLastError();
- FindClose((HANDLE)dir->dd_handle);
- dir->dd_handle = (long)INVALID_HANDLE_VALUE;
- /* POSIX says you shouldn't set errno when readdir can't
- find any more files; so, if another error we leave it set. */
- if (lasterr != ERROR_NO_MORE_FILES)
- errno = err_win_to_posix(lasterr);
- return NULL;
- }
-
- /* We get here if `buf' contains valid data. */
- strcpy(dir->dd_dir.d_name, buf.cFileName);
- ++dir->dd_stat;
-
- /* Set file type, based on WIN32_FIND_DATA */
- mdir->dd_dir.d_type = 0;
- if (buf.dwFileAttributes & FILE_ATTRIBUTE_DIRECTORY)
- mdir->dd_dir.d_type |= DT_DIR;
- else
- mdir->dd_dir.d_type |= DT_REG;
-
- return (struct dirent*)&dir->dd_dir;
-}
-#endif // !NO_MINGW_REPLACE_READDIR
#define S_ISLNK(x) (((x) & S_IFMT) == S_IFLNK)
#define S_ISSOCK(x) 0
-#ifndef _STAT_H_
-#define S_IRUSR 0
-#define S_IWUSR 0
-#define S_IXUSR 0
-#define S_IRWXU (S_IRUSR | S_IWUSR | S_IXUSR)
-#endif
#define S_IRGRP 0
#define S_IWGRP 0
#define S_IXGRP 0
} \
static int mingw_main(c,v)
-#ifndef NO_MINGW_REPLACE_READDIR
-/*
- * A replacement of readdir, to ensure that it reads the file type at
- * the same time. This avoid extra unneeded lstats in git on MinGW
- */
-#undef DT_UNKNOWN
-#undef DT_DIR
-#undef DT_REG
-#undef DT_LNK
-#define DT_UNKNOWN 0
-#define DT_DIR 1
-#define DT_REG 2
-#define DT_LNK 3
-
-struct mingw_dirent
-{
- long d_ino; /* Always zero. */
- union {
- unsigned short d_reclen; /* Always zero. */
- unsigned char d_type; /* Reimplementation adds this */
- };
- unsigned short d_namlen; /* Length of name in d_name. */
- char d_name[FILENAME_MAX]; /* File name. */
-};
-#define dirent mingw_dirent
-#define readdir(x) mingw_readdir(x)
-struct dirent *mingw_readdir(DIR *dir);
-#endif // !NO_MINGW_REPLACE_READDIR
-
/*
* Used by Pthread API implementation for Windows
*/
#include <conio.h>
#include "../strbuf.h"
-DIR *opendir(const char *name)
-{
- int len;
- DIR *p;
- p = (DIR*)malloc(sizeof(DIR));
- memset(p, 0, sizeof(DIR));
- strncpy(p->dd_name, name, PATH_MAX);
- len = strlen(p->dd_name);
- p->dd_name[len] = '/';
- p->dd_name[len+1] = '*';
-
- if (p == NULL)
- return NULL;
-
- p->dd_handle = _findfirst(p->dd_name, &p->dd_dta);
-
- if (p->dd_handle == -1) {
- free(p);
- return NULL;
- }
- return p;
-}
-int closedir(DIR *dir)
-{
- _findclose(dir->dd_handle);
- free(dir);
- return 0;
-}
-
#include "mingw.c"
+++ /dev/null
-/*
- * DIRENT.H (formerly DIRLIB.H)
- * This file has no copyright assigned and is placed in the Public Domain.
- * This file is a part of the mingw-runtime package.
- *
- * The mingw-runtime package and its code is distributed in the hope that it
- * will be useful but WITHOUT ANY WARRANTY. ALL WARRANTIES, EXPRESSED OR
- * IMPLIED ARE HEREBY DISCLAIMED. This includes but is not limited to
- * warranties of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
- *
- * You are free to use this package and its code without limitation.
- */
-#ifndef _DIRENT_H_
-#define _DIRENT_H_
-#include <io.h>
-
-#define PATH_MAX 512
-
-#define __MINGW_NOTHROW
-
-#ifndef RC_INVOKED
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-struct dirent
-{
- long d_ino; /* Always zero. */
- unsigned short d_reclen; /* Always zero. */
- unsigned short d_namlen; /* Length of name in d_name. */
- char d_name[FILENAME_MAX]; /* File name. */
-};
-
-/*
- * This is an internal data structure. Good programmers will not use it
- * except as an argument to one of the functions below.
- * dd_stat field is now int (was short in older versions).
- */
-typedef struct
-{
- /* disk transfer area for this dir */
- struct _finddata_t dd_dta;
-
- /* dirent struct to return from dir (NOTE: this makes this thread
- * safe as long as only one thread uses a particular DIR struct at
- * a time) */
- struct dirent dd_dir;
-
- /* _findnext handle */
- long dd_handle;
-
- /*
- * Status of search:
- * 0 = not started yet (next entry to read is first entry)
- * -1 = off the end
- * positive = 0 based index of next entry
- */
- int dd_stat;
-
- /* given path for dir with search pattern (struct is extended) */
- char dd_name[PATH_MAX+3];
-} DIR;
-
-DIR* __cdecl __MINGW_NOTHROW opendir (const char*);
-struct dirent* __cdecl __MINGW_NOTHROW readdir (DIR*);
-int __cdecl __MINGW_NOTHROW closedir (DIR*);
-void __cdecl __MINGW_NOTHROW rewinddir (DIR*);
-long __cdecl __MINGW_NOTHROW telldir (DIR*);
-void __cdecl __MINGW_NOTHROW seekdir (DIR*, long);
-
-
-/* wide char versions */
-
-struct _wdirent
-{
- long d_ino; /* Always zero. */
- unsigned short d_reclen; /* Always zero. */
- unsigned short d_namlen; /* Length of name in d_name. */
- wchar_t d_name[FILENAME_MAX]; /* File name. */
-};
-
-/*
- * This is an internal data structure. Good programmers will not use it
- * except as an argument to one of the functions below.
- */
-typedef struct
-{
- /* disk transfer area for this dir */
- //struct _wfinddata_t dd_dta;
-
- /* dirent struct to return from dir (NOTE: this makes this thread
- * safe as long as only one thread uses a particular DIR struct at
- * a time) */
- struct _wdirent dd_dir;
-
- /* _findnext handle */
- long dd_handle;
-
- /*
- * Status of search:
- * 0 = not started yet (next entry to read is first entry)
- * -1 = off the end
- * positive = 0 based index of next entry
- */
- int dd_stat;
-
- /* given path for dir with search pattern (struct is extended) */
- wchar_t dd_name[1];
-} _WDIR;
-
-
-
-_WDIR* __cdecl __MINGW_NOTHROW _wopendir (const wchar_t*);
-struct _wdirent* __cdecl __MINGW_NOTHROW _wreaddir (_WDIR*);
-int __cdecl __MINGW_NOTHROW _wclosedir (_WDIR*);
-void __cdecl __MINGW_NOTHROW _wrewinddir (_WDIR*);
-long __cdecl __MINGW_NOTHROW _wtelldir (_WDIR*);
-void __cdecl __MINGW_NOTHROW _wseekdir (_WDIR*, long);
-
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* Not RC_INVOKED */
-
-#endif /* Not _DIRENT_H_ */
typedef int64_t off64_t;
+#define INTMAX_MIN _I64_MIN
+#define INTMAX_MAX _I64_MAX
+#define UINTMAX_MAX _UI64_MAX
+
#define STDOUT_FILENO 1
#define STDERR_FILENO 2
--- /dev/null
+#include "../git-compat-util.h"
+#include "dirent.h"
+
+struct DIR {
+ struct dirent dd_dir; /* includes d_type */
+ HANDLE dd_handle; /* FindFirstFile handle */
+ int dd_stat; /* 0-based index */
+ char dd_name[1]; /* extend struct */
+};
+
+DIR *opendir(const char *name)
+{
+ DWORD attrs = GetFileAttributesA(name);
+ int len;
+ DIR *p;
+
+ /* check for valid path */
+ if (attrs == INVALID_FILE_ATTRIBUTES) {
+ errno = ENOENT;
+ return NULL;
+ }
+
+ /* check if it's a directory */
+ if (!(attrs & FILE_ATTRIBUTE_DIRECTORY)) {
+ errno = ENOTDIR;
+ return NULL;
+ }
+
+ /* check that the pattern won't be too long for FindFirstFileA */
+ len = strlen(name);
+ if (is_dir_sep(name[len - 1]))
+ len--;
+ if (len + 2 >= MAX_PATH) {
+ errno = ENAMETOOLONG;
+ return NULL;
+ }
+
+ p = malloc(sizeof(DIR) + len + 2);
+ if (!p)
+ return NULL;
+
+ memset(p, 0, sizeof(DIR) + len + 2);
+ strcpy(p->dd_name, name);
+ p->dd_name[len] = '/';
+ p->dd_name[len+1] = '*';
+
+ p->dd_handle = INVALID_HANDLE_VALUE;
+ return p;
+}
+
+struct dirent *readdir(DIR *dir)
+{
+ WIN32_FIND_DATAA buf;
+ HANDLE handle;
+
+ if (!dir || !dir->dd_handle) {
+ errno = EBADF; /* No set_errno for mingw */
+ return NULL;
+ }
+
+ if (dir->dd_handle == INVALID_HANDLE_VALUE && dir->dd_stat == 0) {
+ DWORD lasterr;
+ handle = FindFirstFileA(dir->dd_name, &buf);
+ lasterr = GetLastError();
+ dir->dd_handle = handle;
+ if (handle == INVALID_HANDLE_VALUE && (lasterr != ERROR_NO_MORE_FILES)) {
+ errno = err_win_to_posix(lasterr);
+ return NULL;
+ }
+ } else if (dir->dd_handle == INVALID_HANDLE_VALUE) {
+ return NULL;
+ } else if (!FindNextFileA(dir->dd_handle, &buf)) {
+ DWORD lasterr = GetLastError();
+ FindClose(dir->dd_handle);
+ dir->dd_handle = INVALID_HANDLE_VALUE;
+ /* POSIX says you shouldn't set errno when readdir can't
+ find any more files; so, if another error we leave it set. */
+ if (lasterr != ERROR_NO_MORE_FILES)
+ errno = err_win_to_posix(lasterr);
+ return NULL;
+ }
+
+ /* We get here if `buf' contains valid data. */
+ strcpy(dir->dd_dir.d_name, buf.cFileName);
+ ++dir->dd_stat;
+
+ /* Set file type, based on WIN32_FIND_DATA */
+ dir->dd_dir.d_type = 0;
+ if (buf.dwFileAttributes & FILE_ATTRIBUTE_DIRECTORY)
+ dir->dd_dir.d_type |= DT_DIR;
+ else
+ dir->dd_dir.d_type |= DT_REG;
+
+ return &dir->dd_dir;
+}
+
+int closedir(DIR *dir)
+{
+ if (!dir) {
+ errno = EBADF;
+ return -1;
+ }
+
+ if (dir->dd_handle != INVALID_HANDLE_VALUE)
+ FindClose(dir->dd_handle);
+ free(dir);
+ return 0;
+}
--- /dev/null
+#ifndef DIRENT_H
+#define DIRENT_H
+
+typedef struct DIR DIR;
+
+#define DT_UNKNOWN 0
+#define DT_DIR 1
+#define DT_REG 2
+#define DT_LNK 3
+
+struct dirent {
+ long d_ino; /* Always zero. */
+ char d_name[FILENAME_MAX]; /* File name. */
+ union {
+ unsigned short d_reclen; /* Always zero. */
+ unsigned char d_type; /* Reimplementation adds this */
+ };
+};
+
+DIR *opendir(const char *dirname);
+struct dirent *readdir(DIR *dir);
+int closedir(DIR *dir);
+
+#endif /* DIRENT_H */
#if (defined _WIN32 || defined __WIN32__) && ! defined __CYGWIN__
# define WIN32_NATIVE
+# if defined (_MSC_VER)
+# define _WIN32_WINNT 0x0502
+# endif
# include <winsock2.h>
# include <windows.h>
# include <io.h>
export exec_prefix mandir
export srcdir VPATH
-ASCIIDOC8=@ASCIIDOC8@
+ASCIIDOC7=@ASCIIDOC7@
NEEDS_SSL_WITH_CRYPTO=@NEEDS_SSL_WITH_CRYPTO@
NO_OPENSSL=@NO_OPENSSL@
NO_CURL=@NO_CURL@
AC_MSG_CHECKING([for asciidoc version])
asciidoc_version=`$ASCIIDOC --version 2>/dev/null`
case "${asciidoc_version}" in
- asciidoc' '8*)
- ASCIIDOC8=YesPlease
+ asciidoc' '7*)
+ ASCIIDOC7=YesPlease
AC_MSG_RESULT([${asciidoc_version} > 7])
;;
- asciidoc' '7*)
- ASCIIDOC8=
+ asciidoc' '8*)
+ ASCIIDOC7=
AC_MSG_RESULT([${asciidoc_version}])
;;
*)
- ASCIIDOC8=
+ ASCIIDOC7=
AC_MSG_RESULT([${asciidoc_version} (unknown)])
;;
esac
fi
-AC_SUBST(ASCIIDOC8)
+AC_SUBST(ASCIIDOC7)
## Checks for libraries.
;;
esac
__gitcomp "
- add.ignore-errors
+ add.ignoreErrors
+ advice.commitBeforeMerge
+ advice.detachedHead
+ advice.implicitIdentity
+ advice.pushNonFastForward
+ advice.resolveConflict
+ advice.statusHints
alias.
+ am.keepcr
apply.ignorewhitespace
apply.whitespace
branch.autosetupmerge
branch.autosetuprebase
+ browser.
clean.requireForce
color.branch
color.branch.current
color.branch.local
color.branch.plain
color.branch.remote
+ color.decorate.HEAD
+ color.decorate.branch
+ color.decorate.remoteBranch
+ color.decorate.stash
+ color.decorate.tag
color.diff
color.diff.commit
color.diff.frag
+ color.diff.func
color.diff.meta
color.diff.new
color.diff.old
color.diff.plain
color.diff.whitespace
color.grep
- color.grep.external
+ color.grep.context
+ color.grep.filename
+ color.grep.function
+ color.grep.linenumber
color.grep.match
+ color.grep.selected
+ color.grep.separator
color.interactive
+ color.interactive.error
color.interactive.header
color.interactive.help
color.interactive.prompt
color.status.untracked
color.status.updated
color.ui
+ commit.status
commit.template
+ core.abbrevguard
+ core.askpass
+ core.attributesfile
core.autocrlf
core.bare
+ core.bigFileThreshold
core.compression
core.createObject
core.deltaBaseCacheLimit
core.editor
+ core.eol
core.excludesfile
core.fileMode
core.fsyncobjectfiles
core.gitProxy
core.ignoreCygwinFSTricks
core.ignoreStat
+ core.ignorecase
core.logAllRefUpdates
core.loosecompression
+ core.notesRef
core.packedGitLimit
core.packedGitWindowSize
core.pager
core.repositoryFormatVersion
core.safecrlf
core.sharedRepository
+ core.sparseCheckout
core.symlinks
core.trustctime
core.warnAmbiguousRefs
core.worktree
diff.autorefreshindex
diff.external
+ diff.ignoreSubmodules
diff.mnemonicprefix
+ diff.noprefix
diff.renameLimit
- diff.renameLimit.
diff.renames
diff.suppressBlankEmpty
diff.tool
diff.wordRegex
difftool.
difftool.prompt
+ fetch.recurseSubmodules
fetch.unpackLimit
format.attach
format.cc
format.subjectprefix
format.suffix
format.thread
+ format.to
+ gc.
gc.aggressiveWindow
gc.auto
gc.autopacklimit
http.lowSpeedLimit
http.lowSpeedTime
http.maxRequests
+ http.minSessions
http.noEPSV
+ http.postBuffer
http.proxy
http.sslCAInfo
http.sslCAPath
http.sslCert
+ http.sslCertPasswordProtected
http.sslKey
http.sslVerify
+ http.useragent
i18n.commitEncoding
i18n.logOutputEncoding
+ imap.authMethod
imap.folder
imap.host
imap.pass
imap.sslverify
imap.tunnel
imap.user
+ init.templatedir
instaweb.browser
instaweb.httpd
instaweb.local
instaweb.port
interactive.singlekey
log.date
+ log.decorate
log.showroot
mailmap.file
man.
man.viewer
+ merge.
merge.conflictstyle
merge.log
merge.renameLimit
+ merge.renormalize
merge.stat
merge.tool
merge.verbosity
mergetool.
mergetool.keepBackup
+ mergetool.keepTemporaries
mergetool.prompt
+ notes.displayRef
+ notes.rewrite.
+ notes.rewrite.amend
+ notes.rewrite.rebase
+ notes.rewriteMode
+ notes.rewriteRef
pack.compression
pack.deltaCacheLimit
pack.deltaCacheSize
pack.window
pack.windowMemory
pager.
+ pretty.
pull.octopus
pull.twohead
push.default
+ rebase.autosquash
rebase.stat
+ receive.autogc
receive.denyCurrentBranch
+ receive.denyDeleteCurrent
receive.denyDeletes
receive.denyNonFastForwards
receive.fsckObjects
receive.unpackLimit
+ receive.updateserverinfo
+ remotes.
repack.usedeltabaseoffset
rerere.autoupdate
rerere.enabled
+ sendemail.
sendemail.aliasesfile
- sendemail.aliasesfiletype
+ sendemail.aliasfiletype
sendemail.bcc
sendemail.cc
sendemail.cccmd
sendemail.chainreplyto
sendemail.confirm
sendemail.envelopesender
+ sendemail.from
+ sendemail.identity
sendemail.multiedit
sendemail.signedoffbycc
+ sendemail.smtpdomain
sendemail.smtpencryption
sendemail.smtppass
sendemail.smtpserver
+ sendemail.smtpserveroption
sendemail.smtpserverport
sendemail.smtpuser
sendemail.suppresscc
showbranch.default
status.relativePaths
status.showUntrackedFiles
+ status.submodulesummary
+ submodule.
tar.umask
transfer.unpackLimit
url.
if ((options->break_opt = diff_scoreopt_parse(arg)) == -1)
return error("invalid argument to -B: %s", arg+2);
}
- else if (!prefixcmp(arg, "-M") || !prefixcmp(arg, "--detect-renames=") ||
- !strcmp(arg, "--detect-renames")) {
+ else if (!prefixcmp(arg, "-M") || !prefixcmp(arg, "--find-renames=") ||
+ !strcmp(arg, "--find-renames")) {
if ((options->rename_score = diff_scoreopt_parse(arg)) == -1)
return error("invalid argument to -M: %s", arg+2);
options->detect_rename = DIFF_DETECT_RENAME;
}
- else if (!prefixcmp(arg, "-C") || !prefixcmp(arg, "--detect-copies=") ||
- !strcmp(arg, "--detect-copies")) {
+ else if (!prefixcmp(arg, "-C") || !prefixcmp(arg, "--find-copies=") ||
+ !strcmp(arg, "--find-copies")) {
if (options->detect_rename == DIFF_DETECT_COPY)
DIFF_OPT_SET(options, FIND_COPIES_HARDER);
if ((options->rename_score = diff_scoreopt_parse(arg)) == -1)
opt += strlen("break-rewrites");
if (*opt == 0 || *opt++ == '=')
cmd = 'B';
- } else if (!prefixcmp(opt, "detect-copies")) {
- opt += strlen("detect-copies");
+ } else if (!prefixcmp(opt, "find-copies")) {
+ opt += strlen("find-copies");
if (*opt == 0 || *opt++ == '=')
cmd = 'C';
- } else if (!prefixcmp(opt, "detect-renames")) {
- opt += strlen("detect-renames");
+ } else if (!prefixcmp(opt, "find-renames")) {
+ opt += strlen("find-renames");
if (*opt == 0 || *opt++ == '=')
cmd = 'M';
}
case '/':
return cwd + 1;
default:
+ /*
+ * dir can end with a path separator when it's root
+ * directory. Return proper prefix in that case.
+ */
+ if (dir[-1] == '/')
+ return cwd;
return NULL;
}
}
case S_IFLNK:
new = read_blob_entry(ce, &size);
if (!new)
- return error("git checkout-index: unable to read sha1 file of %s (%s)",
+ return error("unable to read sha1 file of %s (%s)",
path, sha1_to_hex(ce->sha1));
if (ce_mode_s_ifmt == S_IFLNK && has_symlinks && !to_tempfile) {
ret = symlink(new, path);
free(new);
if (ret)
- return error("git checkout-index: unable to create symlink %s (%s)",
+ return error("unable to create symlink %s (%s)",
path, strerror(errno));
break;
}
}
if (fd < 0) {
free(new);
- return error("git checkout-index: unable to create file %s (%s)",
+ return error("unable to create file %s (%s)",
path, strerror(errno));
}
close(fd);
free(new);
if (wrote != size)
- return error("git checkout-index: unable to write file %s", path);
+ return error("unable to write file %s", path);
break;
case S_IFGITLINK:
if (to_tempfile)
- return error("git checkout-index: cannot create temporary subproject %s", path);
+ return error("cannot create temporary subproject %s", path);
if (mkdir(path, 0777) < 0)
- return error("git checkout-index: cannot create subproject directory %s", path);
+ return error("cannot create subproject directory %s", path);
break;
default:
- return error("git checkout-index: unknown file mode for %s", path);
+ return error("unknown file mode for %s in index", path);
}
if (state->refresh_cache) {
return 0;
if (!state->force) {
if (!state->quiet)
- fprintf(stderr, "git-checkout-index: %s already exists\n", path);
+ fprintf(stderr, "%s already exists, no checkout\n", path);
return -1;
}
ts ::= # time since the epoch in seconds, ascii base10 notation;
tz ::= # GIT style timezone;
- # note: comments may appear anywhere in the input, except
- # within a data command. Any form of the data command
- # always escapes the related input from comment processing.
+ # note: comments and cat requests may appear anywhere
+ # in the input, except within a data command. Any form
+ # of the data command always escapes the related input
+ # from comment processing.
#
# In case it is not clear, the '#' that starts the comment
# must be the first character on that line (an lf
# preceded it).
#
+ cat_blob ::= 'cat-blob' sp (hexsha1 | idnum) lf;
+
comment ::= '#' not_lf* lf;
not_lf ::= # Any byte that is not ASCII newline (LF);
*/
static struct strbuf new_data = STRBUF_INIT;
static int seen_data_command;
+/* Signal handling */
+static volatile sig_atomic_t checkpoint_requested;
+
+/* Where to write output of cat-blob commands */
+static int cat_blob_fd = STDOUT_FILENO;
+
static void parse_argv(void);
+static void parse_cat_blob(void);
static void write_branch_report(FILE *rpt, struct branch *b)
{
exit(128);
}
+#ifndef SIGUSR1 /* Windows, for example */
+
+static void set_checkpoint_signal(void)
+{
+}
+
+#else
+
+static void checkpoint_signal(int signo)
+{
+ checkpoint_requested = 1;
+}
+
+static void set_checkpoint_signal(void)
+{
+ struct sigaction sa;
+
+ memset(&sa, 0, sizeof(sa));
+ sa.sa_handler = checkpoint_signal;
+ sigemptyset(&sa.sa_mask);
+ sa.sa_flags = SA_RESTART;
+ sigaction(SIGUSR1, &sa, NULL);
+}
+
+#endif
+
static void alloc_objects(unsigned int cnt)
{
struct object_entry_pool *b;
{
unsigned int h = sha1[0] << 8 | sha1[1];
struct object_entry *e = object_table[h];
- struct object_entry *p = NULL;
while (e) {
if (!hashcmp(sha1, e->idx.sha1))
return e;
- p = e;
e = e->next;
}
e = new_object(sha1);
- e->next = NULL;
+ e->next = object_table[h];
e->idx.offset = 0;
- if (p)
- p->next = e;
- else
- object_table[h] = e;
+ object_table[h] = e;
return e;
}
return EOF;
}
- do {
+ for (;;) {
if (unread_command_buf) {
unread_command_buf = 0;
} else {
rc->prev->next = rc;
cmd_tail = rc;
}
- } while (command_buf.buf[0] == '#');
-
- return 0;
+ if (!prefixcmp(command_buf.buf, "cat-blob ")) {
+ parse_cat_blob();
+ continue;
+ }
+ if (command_buf.buf[0] == '#')
+ continue;
+ return 0;
+ }
}
static void skip_optional_lf(void)
unread_command_buf = 1;
}
-static void parse_checkpoint(void)
+static void cat_blob_write(const char *buf, unsigned long size)
{
+ if (write_in_full(cat_blob_fd, buf, size) != size)
+ die_errno("Write to frontend failed");
+}
+
+static void cat_blob(struct object_entry *oe, unsigned char sha1[20])
+{
+ struct strbuf line = STRBUF_INIT;
+ unsigned long size;
+ enum object_type type = 0;
+ char *buf;
+
+ if (!oe || oe->pack_id == MAX_PACK_ID) {
+ buf = read_sha1_file(sha1, &type, &size);
+ } else {
+ type = oe->type;
+ buf = gfi_unpack_entry(oe, &size);
+ }
+
+ /*
+ * Output based on batch_one_object() from cat-file.c.
+ */
+ if (type <= 0) {
+ strbuf_reset(&line);
+ strbuf_addf(&line, "%s missing\n", sha1_to_hex(sha1));
+ cat_blob_write(line.buf, line.len);
+ strbuf_release(&line);
+ free(buf);
+ return;
+ }
+ if (!buf)
+ die("Can't read object %s", sha1_to_hex(sha1));
+ if (type != OBJ_BLOB)
+ die("Object %s is a %s but a blob was expected.",
+ sha1_to_hex(sha1), typename(type));
+ strbuf_reset(&line);
+ strbuf_addf(&line, "%s %s %lu\n", sha1_to_hex(sha1),
+ typename(type), size);
+ cat_blob_write(line.buf, line.len);
+ strbuf_release(&line);
+ cat_blob_write(buf, size);
+ cat_blob_write("\n", 1);
+ free(buf);
+}
+
+static void parse_cat_blob(void)
+{
+ const char *p;
+ struct object_entry *oe = oe;
+ unsigned char sha1[20];
+
+ /* cat-blob SP <object> LF */
+ p = command_buf.buf + strlen("cat-blob ");
+ if (*p == ':') {
+ char *x;
+ oe = find_mark(strtoumax(p + 1, &x, 10));
+ if (x == p + 1)
+ die("Invalid mark: %s", command_buf.buf);
+ if (!oe)
+ die("Unknown mark: %s", command_buf.buf);
+ if (*x)
+ die("Garbage after mark: %s", command_buf.buf);
+ hashcpy(sha1, oe->idx.sha1);
+ } else {
+ if (get_sha1_hex(p, sha1))
+ die("Invalid SHA1: %s", command_buf.buf);
+ if (p[40])
+ die("Garbage after SHA1: %s", command_buf.buf);
+ oe = find_object(sha1);
+ }
+
+ cat_blob(oe, sha1);
+}
+
+static void checkpoint(void)
+{
+ checkpoint_requested = 0;
if (object_count) {
cycle_packfile();
dump_branches();
dump_tags();
dump_marks();
}
+}
+
+static void parse_checkpoint(void)
+{
+ checkpoint_requested = 1;
skip_optional_lf();
}
die("unknown --date-format argument %s", fmt);
}
+static unsigned long ulong_arg(const char *option, const char *arg)
+{
+ char *endptr;
+ unsigned long rv = strtoul(arg, &endptr, 0);
+ if (strchr(arg, '-') || endptr == arg || *endptr)
+ die("%s: argument must be a non-negative integer", option);
+ return rv;
+}
+
static void option_depth(const char *depth)
{
- max_depth = strtoul(depth, NULL, 0);
+ max_depth = ulong_arg("--depth", depth);
if (max_depth > MAX_DEPTH)
die("--depth cannot exceed %u", MAX_DEPTH);
}
static void option_active_branches(const char *branches)
{
- max_active_branches = strtoul(branches, NULL, 0);
+ max_active_branches = ulong_arg("--active-branches", branches);
}
static void option_export_marks(const char *marks)
safe_create_leading_directories_const(export_marks_file);
}
+static void option_cat_blob_fd(const char *fd)
+{
+ unsigned long n = ulong_arg("--cat-blob-fd", fd);
+ if (n > (unsigned long) INT_MAX)
+ die("--cat-blob-fd cannot exceed %d", INT_MAX);
+ cat_blob_fd = (int) n;
+}
+
static void option_export_pack_edges(const char *edges)
{
if (pack_edges)
option_import_marks(feature + 13, from_stream);
} else if (!prefixcmp(feature, "export-marks=")) {
option_export_marks(feature + 13);
+ } else if (!strcmp(feature, "cat-blob")) {
+ ; /* Don't die - this feature is supported */
} else if (!prefixcmp(feature, "relative-marks")) {
relative_marks_paths = 1;
} else if (!prefixcmp(feature, "no-relative-marks")) {
if (parse_one_feature(a + 2, 0))
continue;
+ if (!prefixcmp(a + 2, "cat-blob-fd=")) {
+ option_cat_blob_fd(a + 2 + strlen("cat-blob-fd="));
+ continue;
+ }
+
die("unknown option %s", a);
}
if (i != global_argc)
prepare_packed_git();
start_packfile();
set_die_routine(die_nicely);
+ set_checkpoint_signal();
while (read_next_command() != EOF) {
if (!strcmp("blob", command_buf.buf))
parse_new_blob();
/* ignore non-git options*/;
else
die("Unsupported command: %s", command_buf.buf);
+
+ if (checkpoint_requested)
+ checkpoint();
}
/* argv hasn't been parsed yet, do so */
fi
if use_ext_cmd; then
+ export BASE
eval $GIT_DIFFTOOL_EXTCMD '"$LOCAL"' '"$REMOTE"'
else
run_merge_tool "$merge_tool"
refs/heads/*) remote=${remote#refs/heads/} ;;
refs/* | tags/* | remotes/* ) remote=
esac
-
- [ -n "$remote" ] && echo "refs/remotes/$repo/$remote"
+ [ -n "$remote" ] && case "$repo" in
+ .)
+ echo "refs/heads/$remote"
+ ;;
+ *)
+ echo "refs/remotes/$repo/$remote"
+ ;;
+ esac
esac
}
test -f "$GIT_DIR/MERGE_HEAD" && die_merge
strategy_args= diffstat= no_commit= squash= no_ff= ff_only=
-log_arg= verbosity= progress=
+log_arg= verbosity= progress= recurse_submodules=
merge_args=
curr_branch=$(git symbolic-ref -q HEAD)
curr_branch_short="${curr_branch#refs/heads/}"
--no-r|--no-re|--no-reb|--no-reba|--no-rebas|--no-rebase)
rebase=false
;;
+ --recurse-submodules)
+ recurse_submodules=--recurse-submodules
+ ;;
+ --no-recurse-submodules)
+ recurse_submodules=--no-recurse-submodules
+ ;;
--d|--dr|--dry|--dry-|--dry-r|--dry-ru|--dry-run)
dry_run=--dry-run
;;
done
}
orig_head=$(git rev-parse -q --verify HEAD)
-git fetch $verbosity $progress $dry_run --update-head-ok "$@" || exit 1
+git fetch $verbosity $progress $dry_run $recurse_submodules --update-head-ok "$@" || exit 1
test -z "$dry_run" || exit 0
curr_head=$(git rev-parse -q --verify HEAD)
abort abort rebasing process and restore original branch
skip skip current patch and continue rebasing process
no-verify override pre-rebase hook from stopping the operation
+verify allow pre-rebase hook to run
root rebase all reachable commmits up to the root(s)
autosquash move commits that begin with squash!/fixup! under -i
"
OK_TO_SKIP_PRE_REBASE=yes
;;
--verify)
+ OK_TO_SKIP_PRE_REBASE=
;;
--continue)
is_standalone "$@" || usage
dotest="$GIT_DIR"/rebase-merge
prec=4
verbose=
-diffstat=$(git config --bool rebase.stat)
+diffstat=
+test "$(git config --bool rebase.stat)" = true && diffstat=t
git_am_opt=
rebase_root=
force_rebase=
--no-verify)
OK_TO_SKIP_PRE_REBASE=yes
;;
+ --verify)
+ OK_TO_SKIP_PRE_REBASE=
+ ;;
--continue)
test -d "$dotest" -o -d "$GIT_DIR"/rebase-apply ||
die "No rebase in progress?"
die "No rebase in progress?"
git rerere clear
- if test -d "$dotest"
- then
- GIT_QUIET=$(cat "$dotest/quiet")
- move_to_original_branch
- else
- dotest="$GIT_DIR"/rebase-apply
- GIT_QUIET=$(cat "$dotest/quiet")
- move_to_original_branch
- fi
+
+ test -d "$dotest" || dotest="$GIT_DIR"/rebase-apply
+
+ head_name="$(cat "$dotest"/head-name)" &&
+ case "$head_name" in
+ refs/*)
+ git symbolic-ref HEAD $head_name ||
+ die "Could not move back to $head_name"
+ ;;
+ esac
git reset --hard $(cat "$dotest/orig-head")
rm -r "$dotest"
exit
url=$2
reference="$3"
- # If there already is a directory at the submodule path,
- # expect it to be empty (since that is the default checkout
- # action) and try to remove it.
- # Note: if $path is a symlink to a directory the test will
- # succeed but the rmdir will fail. We might want to fix this.
- if test -d "$path"
- then
- rmdir "$path" 2>/dev/null ||
- die "Directory '$path' exists, but is neither empty nor a git repository"
- fi
-
- test -e "$path" &&
- die "A file already exist at path '$path'"
-
if test -n "$reference"
then
git-clone "$reference" -n "$url" "$path"
# ash fails to wordsplit ${branch:+-b "$branch"...}
case "$branch" in
'') git checkout -f -q ;;
- ?*) git checkout -f -q -b "$branch" "origin/$branch" ;;
+ ?*) git checkout -f -q -B "$branch" "origin/$branch" ;;
esac
) || die "Unable to checkout submodule '$path'"
fi
valid_tool() {
case "$1" in
- firefox | iceweasel | chrome | google-chrome | chromium | konqueror | w3m | links | lynx | dillo | open | start)
- ;; # happy
- *)
- valid_custom_tool "$1" || return 1
- ;;
+ firefox | iceweasel | seamonkey | iceape | \
+ chrome | google-chrome | chromium | chromium-browser |\
+ konqueror | opera | w3m | elinks | links | lynx | dillo | open | start)
+ ;; # happy
+ *)
+ valid_custom_tool "$1" || return 1
+ ;;
esac
}
init_browser_path() {
browser_path=$(git config "browser.$1.path")
- test -z "$browser_path" && browser_path="$1"
+ if test -z "$browser_path" &&
+ test "$1" = chromium &&
+ type chromium-browser >/dev/null 2>&1
+ then
+ browser_path=chromium-browser
+ fi
+ : ${browser_path:="$1"}
}
while test $# != 0
do
- case "$1" in
+ case "$1" in
-b|--browser*|-t|--tool*)
- case "$#,$1" in
+ case "$#,$1" in
*,*=*)
- browser=`expr "z$1" : 'z-[^=]*=\(.*\)'`
- ;;
+ browser=`expr "z$1" : 'z-[^=]*=\(.*\)'`
+ ;;
1,*)
- usage ;;
+ usage ;;
*)
- browser="$2"
- shift ;;
- esac
- ;;
+ browser="$2"
+ shift ;;
+ esac
+ ;;
-c|--config*)
- case "$#,$1" in
+ case "$#,$1" in
*,*=*)
- conf=`expr "z$1" : 'z-[^=]*=\(.*\)'`
- ;;
+ conf=`expr "z$1" : 'z-[^=]*=\(.*\)'`
+ ;;
1,*)
- usage ;;
+ usage ;;
*)
- conf="$2"
- shift ;;
- esac
- ;;
+ conf="$2"
+ shift ;;
+ esac
+ ;;
--)
- break
- ;;
+ break
+ ;;
-*)
- usage
- ;;
+ usage
+ ;;
*)
- break
- ;;
- esac
- shift
+ break
+ ;;
+ esac
+ shift
done
test $# = 0 && usage
if test -z "$browser"
then
- for opt in "$conf" "web.browser"
- do
- test -z "$opt" && continue
- browser="`git config $opt`"
- test -z "$browser" || break
- done
- if test -n "$browser" && ! valid_tool "$browser"; then
- echo >&2 "git config option $opt set to unknown browser: $browser"
- echo >&2 "Resetting to default..."
- unset browser
- fi
+ for opt in "$conf" "web.browser"
+ do
+ test -z "$opt" && continue
+ browser="`git config $opt`"
+ test -z "$browser" || break
+ done
+ if test -n "$browser" && ! valid_tool "$browser"; then
+ echo >&2 "git config option $opt set to unknown browser: $browser"
+ echo >&2 "Resetting to default..."
+ unset browser
+ fi
fi
if test -z "$browser" ; then
- if test -n "$DISPLAY"; then
- browser_candidates="firefox iceweasel google-chrome chrome chromium konqueror w3m links lynx dillo"
- if test "$KDE_FULL_SESSION" = "true"; then
- browser_candidates="konqueror $browser_candidates"
+ if test -n "$DISPLAY"; then
+ browser_candidates="firefox iceweasel google-chrome chrome chromium chromium-browser konqueror opera seamonkey iceape w3m elinks links lynx dillo"
+ if test "$KDE_FULL_SESSION" = "true"; then
+ browser_candidates="konqueror $browser_candidates"
+ fi
+ else
+ browser_candidates="w3m elinks links lynx"
fi
- else
- browser_candidates="w3m links lynx"
- fi
- # SECURITYSESSIONID indicates an OS X GUI login session
- if test -n "$SECURITYSESSIONID" \
- -o "$TERM_PROGRAM" = "Apple_Terminal" ; then
- browser_candidates="open $browser_candidates"
- fi
- # /bin/start indicates MinGW
- if test -x /bin/start; then
- browser_candidates="start $browser_candidates"
- fi
-
- for i in $browser_candidates; do
- init_browser_path $i
- if type "$browser_path" > /dev/null 2>&1; then
- browser=$i
- break
+ # SECURITYSESSIONID indicates an OS X GUI login session
+ if test -n "$SECURITYSESSIONID" \
+ -o "$TERM_PROGRAM" = "Apple_Terminal" ; then
+ browser_candidates="open $browser_candidates"
fi
- done
- test -z "$browser" && die "No known browser available."
+ # /bin/start indicates MinGW
+ if test -x /bin/start; then
+ browser_candidates="start $browser_candidates"
+ fi
+
+ for i in $browser_candidates; do
+ init_browser_path $i
+ if type "$browser_path" > /dev/null 2>&1; then
+ browser=$i
+ break
+ fi
+ done
+ test -z "$browser" && die "No known browser available."
else
- valid_tool "$browser" || die "Unknown browser '$browser'."
+ valid_tool "$browser" || die "Unknown browser '$browser'."
- init_browser_path "$browser"
+ init_browser_path "$browser"
- if test -z "$browser_cmd" && ! type "$browser_path" > /dev/null 2>&1; then
- die "The browser $browser is not available as '$browser_path'."
- fi
+ if test -z "$browser_cmd" && ! type "$browser_path" > /dev/null 2>&1; then
+ die "The browser $browser is not available as '$browser_path'."
+ fi
fi
case "$browser" in
- firefox|iceweasel)
+firefox|iceweasel|seamonkey|iceape)
# Check version because firefox < 2.0 does not support "-new-tab".
vers=$(expr "$($browser_path -version)" : '.* \([0-9][0-9]*\)\..*')
NEWTAB='-new-tab'
test "$vers" -lt 2 && NEWTAB=''
"$browser_path" $NEWTAB "$@" &
;;
- google-chrome|chrome|chromium)
- # Actual command for chromium is chromium-browser.
+google-chrome|chrome|chromium|chromium-browser)
# No need to specify newTab. It's default in chromium
eval "$browser_path" "$@" &
;;
- konqueror)
+konqueror)
case "$(basename "$browser_path")" in
- konqueror)
+ konqueror)
# It's simpler to use kfmclient to open a new tab in konqueror.
browser_path="$(echo "$browser_path" | sed -e 's/konqueror$/kfmclient/')"
type "$browser_path" > /dev/null 2>&1 || die "No '$browser_path' found."
eval "$browser_path" newTab "$@"
;;
- kfmclient)
+ kfmclient)
eval "$browser_path" newTab "$@"
;;
- *)
+ *)
"$browser_path" "$@" &
;;
esac
;;
- w3m|links|lynx|open)
+w3m|elinks|links|lynx|open)
eval "$browser_path" "$@"
;;
- start)
- exec "$browser_path" '"web-browse"' "$@"
- ;;
- dillo)
+start)
+ exec "$browser_path" '"web-browse"' "$@"
+ ;;
+opera|dillo)
"$browser_path" "$@" &
;;
- *)
+*)
if test -n "$browser_cmd"; then
- ( eval $browser_cmd "$@" )
+ ( eval $browser_cmd "$@" )
fi
;;
esac
proc parseviewargs {n arglist} {
global vdatemode vmergeonly vflags vdflags vrevs vfiltered vorigargs env
+ global worddiff git_version
set vdatemode($n) 0
set vmergeonly($n) 0
lappend diffargs $arg
}
"--raw" - "--patch-with-raw" - "--patch-with-stat" -
- "--name-only" - "--name-status" - "--color" - "--color-words" -
+ "--name-only" - "--name-status" - "--color" -
"--log-size" - "--pretty=*" - "--decorate" - "--abbrev-commit" -
"--cc" - "-z" - "--header" - "--parents" - "--boundary" -
"--no-color" - "-g" - "--walk-reflogs" - "--no-walk" -
# These cause our parsing of git log's output to fail, or else
# they're options we want to set ourselves, so ignore them.
}
+ "--color-words*" - "--word-diff=color" {
+ # These trigger a word diff in the console interface,
+ # so help the user by enabling our own support
+ if {[package vcompare $git_version "1.7.2"] >= 0} {
+ set worddiff [mc "Color words"]
+ }
+ }
+ "--word-diff*" {
+ if {[package vcompare $git_version "1.7.2"] >= 0} {
+ set worddiff [mc "Markup words"]
+ }
+ }
"--stat=*" - "--numstat" - "--shortstat" - "--summary" -
"--check" - "--exit-code" - "--quiet" - "--topo-order" -
"--full-history" - "--dense" - "--sparse" -
global viewactive viewinstances vmergeonly
global mainheadid viewmainheadid viewmainheadid_orig
global vcanopt vflags vrevs vorigargs
+ global show_notes
set startmsecs [clock clicks -milliseconds]
set commitidx($view) 0
}
if {[catch {
- set fd [open [concat | git log --no-color -z --pretty=raw --parents \
- --boundary $args "--" $files] r]
+ set fd [open [concat | git log --no-color -z --pretty=raw $show_notes \
+ --parents --boundary $args "--" $files] r]
} err]} {
error_popup "[mc "Error executing git log:"] $err"
return 0
global mainheadid viewmainheadid viewmainheadid_orig pending_select
global isworktree
global varcid vposids vnegids vflags vrevs
+ global show_notes
set isworktree [expr {[exec git rev-parse --is-inside-work-tree] == "true"}]
rereadrefs
set args $vorigargs($view)
}
if {[catch {
- set fd [open [concat | git log --no-color -z --pretty=raw --parents \
- --boundary $args "--" $vfilelimit($view)] r]
+ set fd [open [concat | git log --no-color -z --pretty=raw $show_notes \
+ --parents --boundary $args "--" $vfilelimit($view)] r]
} err]} {
error_popup "[mc "Error executing git log:"] $err"
return
global fprogitem fprogcoord lastprogupdate progupdatepending
global rprogitem rprogcoord rownumsel numcommits
global have_tk85 use_ttk NS
+ global git_version
+ global worddiff
# The "mc" arguments here are purely so that xgettext
# sees the following string as needing to be translated
${NS}::checkbutton .bleft.mid.ignspace -text [mc "Ignore space change"] \
-command changeignorespace -variable ignorespace
pack .bleft.mid.ignspace -side left -padx 5
+
+ set worddiff [mc "Line diff"]
+ if {[package vcompare $git_version "1.7.2"] >= 0} {
+ makedroplist .bleft.mid.worddiff worddiff [mc "Line diff"] \
+ [mc "Markup words"] [mc "Color words"]
+ trace add variable worddiff write changeworddiff
+ pack .bleft.mid.worddiff -side left -padx 5
+ }
+
set ctext .bleft.bottom.ctext
text $ctext -background $bgcolor -foreground $fgcolor \
-state disabled -font textfont \
global ctxbut
bind $cflist $ctxbut {pop_flist_menu %W %X %Y %x %y}
bind $ctext $ctxbut {pop_diff_menu %W %X %Y %x %y}
+ bind $ctext <Button-1> {focus %W}
set maincursor [. cget -cursor]
set textcursor [$ctext cget -cursor]
[lindex [split $commentend .] 0]}]
mark_ctext_line $lnum
}
+ $ctext config -state disabled
return 0
}
$ctext config -state disabled
reselectline
}
+proc changeworddiff {name ix op} {
+ reselectline
+}
+
proc getblobdiffs {ids} {
global blobdifffd diffids env
global diffinhdr treediffs
global diffcontext
global ignorespace
+ global worddiff
global limitdiffs vfilelimit curview
global diffencoding targetline diffnparents
global git_version currdiffsubmod
if {$ignorespace} {
append cmd " -w"
}
+ if {$worddiff ne [mc "Line diff"]} {
+ append cmd " --word-diff=porcelain"
+ }
if {$limitdiffs && $vfilelimit($curview) ne {}} {
set cmd [concat $cmd -- $vfilelimit($curview)]
}
global ctext_file_names ctext_file_lines
global diffinhdr treediffs mergemax diffnparents
global diffencoding jump_to_here targetline diffline currdiffsubmod
+ global worddiff
set nr 0
$ctext conf -state normal
# parse the prefix - one ' ', '-' or '+' for each parent
set prefix [string range $line 0 [expr {$diffnparents - 1}]]
set tag [expr {$diffnparents > 1? "m": "d"}]
+ set dowords [expr {$worddiff ne [mc "Line diff"] && $diffnparents == 1}]
+ set words_pre_markup ""
+ set words_post_markup ""
if {[string trim $prefix " -+"] eq {}} {
# prefix only has " ", "-" and "+" in it: normal diff line
set num [string first "-" $prefix]
+ if {$dowords} {
+ set line [string range $line 1 end]
+ }
if {$num >= 0} {
# removed line, first parent with line is $num
if {$num >= $mergemax} {
set num "max"
}
- $ctext insert end "$line\n" $tag$num
+ if {$dowords && $worddiff eq [mc "Markup words"]} {
+ $ctext insert end "\[-$line-\]" $tag$num
+ } else {
+ $ctext insert end "$line" $tag$num
+ }
+ if {!$dowords} {
+ $ctext insert end "\n" $tag$num
+ }
} else {
set tags {}
if {[string first "+" $prefix] >= 0} {
lappend tags m$num
}
}
+ set words_pre_markup "{+"
+ set words_post_markup "+}"
}
if {$targetline ne {}} {
if {$diffline == $targetline} {
incr diffline
}
}
- $ctext insert end "$line\n" $tags
+ if {$dowords && $worddiff eq [mc "Markup words"]} {
+ $ctext insert end "$words_pre_markup$line$words_post_markup" $tags
+ } else {
+ $ctext insert end "$line" $tags
+ }
+ if {!$dowords} {
+ $ctext insert end "\n" $tags
+ }
}
+ } elseif {$dowords && $prefix eq "~"} {
+ $ctext insert end "\n" {}
} else {
# "\ No newline at end of file",
# or something else we don't recognize
set diffcolors {red "#00a000" blue}
set diffcontext 3
set ignorespace 0
+set worddiff ""
set markbgcolor "#e0e0ff"
set circlecolors {white blue gray blue blue}
set git_version [join [lrange [split [lindex [exec git version] end] .] 0 2] .]
+set show_notes {}
+if {[package vcompare $git_version "1.6.6.2"] >= 0} {
+ set show_notes "--show-notes"
+}
+
set runq {}
set history {}
set historyindex 0
--- /dev/null
+# Translation of gitk to Brazilian Portuguese.
+# Copyright (C) 2007 Paul Mackerras, et al.
+# This file is distributed under the same license as the gitk package.
+#
+# Alexandre Erwin Ittner <alexandre@ittner.com.br>, 2010.
+#
+#, fuzzy
+msgid ""
+msgstr ""
+"Project-Id-Version: gitk\n"
+"Report-Msgid-Bugs-To: \n"
+"POT-Creation-Date: 2010-01-26 15:47-0800\n"
+"PO-Revision-Date: 2010-12-06 23:39-0200\n"
+"Last-Translator: Alexandre Erwin Ittner <alexandre@ittner.com.br>\n"
+"Language-Team: Brazilian Portuguese <>\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#: gitk:115
+msgid "Couldn't get list of unmerged files:"
+msgstr "Não foi possível obter a lista dos arquivos não mesclados:"
+
+#: gitk:274
+msgid "Error parsing revisions:"
+msgstr "Erro ao interpretar revisões:"
+
+#: gitk:330
+msgid "Error executing --argscmd command:"
+msgstr "Erro ao executar o comando--argscmd:"
+
+#: gitk:343
+msgid "No files selected: --merge specified but no files are unmerged."
+msgstr ""
+"Nenhum arquivo foi selecionado: --merge especificado mas não há arquivos não-"
+"mesclados."
+
+#: gitk:346
+msgid ""
+"No files selected: --merge specified but no unmerged files are within file "
+"limit."
+msgstr ""
+"Nenhum arquivo foi selecionado: --merge especificado mas não há arquivos não-"
+"mesclados dentro dos limites."
+
+#: gitk:368 gitk:516
+msgid "Error executing git log:"
+msgstr "Erro ao executar git log:"
+
+#: gitk:386 gitk:532
+msgid "Reading"
+msgstr "Lendo"
+
+#: gitk:446 gitk:4271
+msgid "Reading commits..."
+msgstr "Lendo revisões..."
+
+#: gitk:449 gitk:1580 gitk:4274
+msgid "No commits selected"
+msgstr "Nenhuma revisão foi selecionada"
+
+#: gitk:1456
+msgid "Can't parse git log output:"
+msgstr "Não foi possível interpretar a saída do \"git log\":"
+
+#: gitk:1676
+msgid "No commit information available"
+msgstr "Não há informações disponíveis sobre a revisão"
+
+#: gitk:1818
+msgid "mc"
+msgstr "mc"
+
+#: gitk:1853 gitk:4064 gitk:9067 gitk:10607 gitk:10817
+msgid "OK"
+msgstr "Ok"
+
+#: gitk:1855 gitk:4066 gitk:8657 gitk:8736 gitk:8851 gitk:8900 gitk:9069
+#: gitk:10608 gitk:10818
+msgid "Cancel"
+msgstr "Cancelar"
+
+#: gitk:1980
+msgid "Update"
+msgstr "Atualizar"
+
+#: gitk:1981
+msgid "Reload"
+msgstr "Recarregar"
+
+#: gitk:1982
+msgid "Reread references"
+msgstr "Ler as referências novamente"
+
+#: gitk:1983
+msgid "List references"
+msgstr "Listar referências"
+
+#: gitk:1985
+msgid "Start git gui"
+msgstr "Iniciar Git GUI"
+
+#: gitk:1987
+msgid "Quit"
+msgstr "Sair"
+
+#: gitk:1979
+msgid "File"
+msgstr "Arquivo"
+
+#: gitk:1991
+msgid "Preferences"
+msgstr "Preferências"
+
+#: gitk:1990
+msgid "Edit"
+msgstr "Editar"
+
+#: gitk:1995
+msgid "New view..."
+msgstr "Nova vista..."
+
+#: gitk:1996
+msgid "Edit view..."
+msgstr "Editar vista..."
+
+#: gitk:1997
+msgid "Delete view"
+msgstr "Apagar vista"
+
+#: gitk:1999
+msgid "All files"
+msgstr "Todos os arquivos"
+
+#: gitk:1994 gitk:3817
+msgid "View"
+msgstr "Exibir"
+
+#: gitk:2004 gitk:2014 gitk:2787
+msgid "About gitk"
+msgstr "Sobre o gitk"
+
+#: gitk:2005 gitk:2019
+msgid "Key bindings"
+msgstr "Atalhos de teclado"
+
+#: gitk:2003 gitk:2018
+msgid "Help"
+msgstr "Ajuda"
+
+#: gitk:2096 gitk:8132
+msgid "SHA1 ID:"
+msgstr "SHA1 ID:"
+
+#: gitk:2127
+msgid "Row"
+msgstr "Linha"
+
+#: gitk:2165
+msgid "Find"
+msgstr "Encontrar"
+
+#: gitk:2166
+msgid "next"
+msgstr "Próximo"
+
+#: gitk:2167
+msgid "prev"
+msgstr "Anterior"
+
+#: gitk:2168
+msgid "commit"
+msgstr "Revisão"
+
+#: gitk:2171 gitk:2173 gitk:4432 gitk:4455 gitk:4479 gitk:6420 gitk:6492
+#: gitk:6576
+msgid "containing:"
+msgstr "contendo:"
+
+#: gitk:2174 gitk:3298 gitk:3303 gitk:4507
+msgid "touching paths:"
+msgstr "envolvendo os caminhos:"
+
+#: gitk:2175 gitk:4512
+msgid "adding/removing string:"
+msgstr "Adicionando/removendo texto:"
+
+#: gitk:2184 gitk:2186
+msgid "Exact"
+msgstr "Exatamente"
+
+#: gitk:2186 gitk:4587 gitk:6388
+msgid "IgnCase"
+msgstr "Ignorar maiúsculas/minúsculas"
+
+#: gitk:2186 gitk:4481 gitk:4585 gitk:6384
+msgid "Regexp"
+msgstr "Expressão regular"
+
+#: gitk:2188 gitk:2189 gitk:4606 gitk:4636 gitk:4643 gitk:6512 gitk:6580
+msgid "All fields"
+msgstr "Todos os campos"
+
+#: gitk:2189 gitk:4604 gitk:4636 gitk:6451
+msgid "Headline"
+msgstr "Assunto"
+
+#: gitk:2190 gitk:4604 gitk:6451 gitk:6580 gitk:7013
+msgid "Comments"
+msgstr "Descrição da revisão"
+
+#: gitk:2190 gitk:4604 gitk:4608 gitk:4643 gitk:6451 gitk:6948 gitk:8307
+#: gitk:8322
+msgid "Author"
+msgstr "Autor"
+
+#: gitk:2190 gitk:4604 gitk:6451 gitk:6950
+msgid "Committer"
+msgstr "Revisor"
+
+#: gitk:2221
+msgid "Search"
+msgstr "Buscar"
+
+#: gitk:2229
+msgid "Diff"
+msgstr "Diferenças"
+
+#: gitk:2231
+msgid "Old version"
+msgstr "Versão antiga"
+
+#: gitk:2233
+msgid "New version"
+msgstr "Versão nova"
+
+#: gitk:2235
+msgid "Lines of context"
+msgstr "Número de linhas de contexto"
+
+#: gitk:2245
+msgid "Ignore space change"
+msgstr "Ignorar mudanças de caixa"
+
+#: gitk:2304
+msgid "Patch"
+msgstr "Diferenças"
+
+#: gitk:2306
+msgid "Tree"
+msgstr "Árvore"
+
+#: gitk:2463 gitk:2480
+msgid "Diff this -> selected"
+msgstr "Comparar esta revisão com a selecionada"
+
+#: gitk:2464 gitk:2481
+msgid "Diff selected -> this"
+msgstr "Comparar a revisão selecionada com esta"
+
+#: gitk:2465 gitk:2482
+msgid "Make patch"
+msgstr "Criar patch"
+
+#: gitk:2466 gitk:8715
+msgid "Create tag"
+msgstr "Criar etiqueta"
+
+#: gitk:2467 gitk:8831
+msgid "Write commit to file"
+msgstr "Salvar revisão para um arquivo"
+
+#: gitk:2468 gitk:8888
+msgid "Create new branch"
+msgstr "Criar novo ramo"
+
+#: gitk:2469
+msgid "Cherry-pick this commit"
+msgstr "Fazer cherry-pick desta revisão"
+
+#: gitk:2470
+msgid "Reset HEAD branch to here"
+msgstr "Redefinir HEAD para cá"
+
+#: gitk:2471
+msgid "Mark this commit"
+msgstr "Marcar esta revisão"
+
+#: gitk:2472
+msgid "Return to mark"
+msgstr "Voltar à marca"
+
+#: gitk:2473
+msgid "Find descendant of this and mark"
+msgstr "Encontrar descendente e marcar"
+
+#: gitk:2474
+msgid "Compare with marked commit"
+msgstr "Comparar com a revisão marcada"
+
+#: gitk:2488
+msgid "Check out this branch"
+msgstr "Efetuar checkout deste ramo"
+
+#: gitk:2489
+msgid "Remove this branch"
+msgstr "Excluir este ramo"
+
+#: gitk:2496
+msgid "Highlight this too"
+msgstr "Marcar este também"
+
+#: gitk:2497
+msgid "Highlight this only"
+msgstr "Marcar apenas este"
+
+#: gitk:2498
+msgid "External diff"
+msgstr "Diff externo"
+
+#: gitk:2499
+msgid "Blame parent commit"
+msgstr "Anotar revisão anterior"
+
+#: gitk:2506
+msgid "Show origin of this line"
+msgstr "Exibir origem desta linha"
+
+#: gitk:2507
+msgid "Run git gui blame on this line"
+msgstr "Executar 'git blame' nesta linha"
+
+#: gitk:2789
+msgid "\n"
+"Gitk - a commit viewer for git\n"
+"\n"
+"Copyright ©9 2005-2010 Paul Mackerras\n"
+"\n"
+"Use and redistribute under the terms of the GNU General Public License"
+msgstr "\n"
+"Gitk - um visualizador de revisões para o git \n"
+"\n"
+"Copyright ©9 2005-2010 Paul Mackerras\n"
+"\n"
+"Uso e distribuição segundo os termos da Licença Pública Geral GNU"
+
+#: gitk:2797 gitk:2862 gitk:9253
+msgid "Close"
+msgstr "Fechar"
+
+#: gitk:2818
+msgid "Gitk key bindings"
+msgstr "Atalhos de teclado"
+
+#: gitk:2821
+msgid "Gitk key bindings:"
+msgstr "Atalhos de teclado:"
+
+#: gitk:2823
+#, tcl-format
+msgid "<%s-Q>\t\tQuit"
+msgstr "<%s-Q>\t\tSair"
+
+#: gitk:2824
+#, tcl-format
+msgid "<%s-W>\t\tClose window"
+msgstr "<%s-W>\t\tFechar janela"
+
+#: gitk:2825
+msgid "<Home>\t\tMove to first commit"
+msgstr "<Home>\t\tIr para a primeira revisão"
+
+#: gitk:2826
+msgid "<End>\t\tMove to last commit"
+msgstr "<End>\t\tIr para a última revisão"
+
+#: gitk:2827
+msgid "<Up>, p, i\tMove up one commit"
+msgstr "<Up>, p, i\tIr para uma revisão acima"
+
+#: gitk:2828
+msgid "<Down>, n, k\tMove down one commit"
+msgstr "<Down>, n, k\tIr para uma revisão abaixo"
+
+#: gitk:2829
+msgid "<Left>, z, j\tGo back in history list"
+msgstr "<Left>, z, j\tVoltar no histórico"
+
+#: gitk:2830
+msgid "<Right>, x, l\tGo forward in history list"
+msgstr "<Right>, x, l\tAvançar no histórico"
+
+#: gitk:2831
+msgid "<PageUp>\tMove up one page in commit list"
+msgstr "<PageUp>\tSubir uma página na lista de revisões"
+
+#: gitk:2832
+msgid "<PageDown>\tMove down one page in commit list"
+msgstr "<PageDown>\tDescer uma página na lista de revisões"
+
+#: gitk:2833
+#, tcl-format
+msgid "<%s-Home>\tScroll to top of commit list"
+msgstr "<%s-Home>\tRolar para o início da lista de revisões"
+
+#: gitk:2834
+#, tcl-format
+msgid "<%s-End>\tScroll to bottom of commit list"
+msgstr "<%s-End>\tRolar para o final da lista de revisões"
+
+#: gitk:2835
+#, tcl-format
+msgid "<%s-Up>\tScroll commit list up one line"
+msgstr "<%s-Up>\tRolar uma linha acima na lista de revisões"
+
+#: gitk:2836
+#, tcl-format
+msgid "<%s-Down>\tScroll commit list down one line"
+msgstr "<%s-Down>\tRolar uma linha abaixo na lista de revisões"
+
+#: gitk:2837
+#, tcl-format
+msgid "<%s-PageUp>\tScroll commit list up one page"
+msgstr "<%s-PageUp>\tRolar uma página acima na lista de revisões"
+
+#: gitk:2838
+#, tcl-format
+msgid "<%s-PageDown>\tScroll commit list down one page"
+msgstr "<%s-PageDown>\tRolar uma página abaixo na lista de revisões"
+
+#: gitk:2839
+msgid "<Shift-Up>\tFind backwards (upwards, later commits)"
+msgstr "<Shift-Up>\tProcurar próxima (revisões mas recentes)"
+
+#: gitk:2840
+msgid "<Shift-Down>\tFind forwards (downwards, earlier commits)"
+msgstr "<Shift-Down>\tProcurar anterior (revisões mais antigas)"
+
+#: gitk:2841
+msgid "<Delete>, b\tScroll diff view up one page"
+msgstr "<Delete>, b\tRola alterações uma página acima"
+
+#: gitk:2842
+msgid "<Backspace>\tScroll diff view up one page"
+msgstr "<Backspace>\tRolar alterações uma página abaixo"
+
+#: gitk:2843
+msgid "<Space>\t\tScroll diff view down one page"
+msgstr "<Space>\t\tRolar alterações uma página abaixo"
+
+#: gitk:2844
+msgid "u\t\tScroll diff view up 18 lines"
+msgstr "u\t\tRolar alterações 18 linhas acima"
+
+#: gitk:2845
+msgid "d\t\tScroll diff view down 18 lines"
+msgstr "d\t\tRolar alterações 18 linhas abaixo"
+
+#: gitk:2846
+#, tcl-format
+msgid "<%s-F>\t\tFind"
+msgstr "<%s-F>\t\tProcurar"
+
+#: gitk:2847
+#, tcl-format
+msgid "<%s-G>\t\tMove to next find hit"
+msgstr "<%s-G>\t\tIr para a próxima ocorrência"
+
+#: gitk:2848
+msgid "<Return>\tMove to next find hit"
+msgstr "<Return>\tIr para a próxima ocorrência"
+
+#: gitk:2849
+msgid "/\t\tFocus the search box"
+msgstr "/\t\tPor foco na caixa de busca"
+
+#: gitk:2850
+msgid "?\t\tMove to previous find hit"
+msgstr "?\t\tIr para a ocorrência anterior"
+
+#: gitk:2851
+msgid "f\t\tScroll diff view to next file"
+msgstr "f\t\tRolar alterações para o próximo arquivo"
+
+#: gitk:2852
+#, tcl-format
+msgid "<%s-S>\t\tSearch for next hit in diff view"
+msgstr "<%s-S>\t\tProcurar a próxima ocorrência na lista de alterações"
+
+#: gitk:2853
+#, tcl-format
+msgid "<%s-R>\t\tSearch for previous hit in diff view"
+msgstr "<%s-R>\t\tProcurar ocorrência anterior na lista de alterações"
+
+#: gitk:2854
+#, tcl-format
+msgid "<%s-KP+>\tIncrease font size"
+msgstr "<%s-KP+>\tAumentar tamanho da fonte"
+
+#: gitk:2855
+#, tcl-format
+msgid "<%s-plus>\tIncrease font size"
+msgstr "<%s-plus>\tAumentar tamanho da fonte"
+
+#: gitk:2856
+#, tcl-format
+msgid "<%s-KP->\tDecrease font size"
+msgstr "<%s-KP->\tReduzir tamanho da fonte"
+
+#: gitk:2857
+#, tcl-format
+msgid "<%s-minus>\tDecrease font size"
+msgstr "<%s-minus>\tReduzir tamanho da fonte"
+
+#: gitk:2858
+msgid "<F5>\t\tUpdate"
+msgstr "<F5>\t\tAtualizar"
+
+#: gitk:3313 gitk:3322
+#, tcl-format
+msgid "Error creating temporary directory %s:"
+msgstr "Erro ao criar o diretório temporário %s:"
+
+#: gitk:3335
+#, tcl-format
+msgid "Error getting \"%s\" from %s:"
+msgstr "Erro ao ler \"%s\" de %s:"
+
+#: gitk:3398
+msgid "command failed:"
+msgstr "O comando falhou:"
+
+#: gitk:3547
+msgid "No such commit"
+msgstr "Revisão não encontrada"
+
+#: gitk:3561
+msgid "git gui blame: command failed:"
+msgstr "Comando 'git gui blame' falhou:"
+
+#: gitk:3592
+#, tcl-format
+msgid "Couldn't read merge head: %s"
+msgstr "Impossível ler merge head: %s"
+
+#: gitk:3600
+#, tcl-format
+msgid "Error reading index: %s"
+msgstr "Erro ao ler o índice: %s"
+
+#: gitk:3625
+#, tcl-format
+msgid "Couldn't start git blame: %s"
+msgstr "Não foi possível inciar o 'git blame': %s"
+
+#: gitk:3628 gitk:6419
+msgid "Searching"
+msgstr "Procurando"
+
+#: gitk:3660
+#, tcl-format
+msgid "Error running git blame: %s"
+msgstr "Erro ao executar 'git blame': %s"
+
+#: gitk:3688
+#, tcl-format
+msgid "That line comes from commit %s, which is not in this view"
+msgstr "Esta linha vem da revisão %s, que não está nesta vista"
+
+#: gitk:3702
+msgid "External diff viewer failed:"
+msgstr "Erro do visualizador de alterações externo:"
+
+#: gitk:3820
+msgid "Gitk view definition"
+msgstr "Definir vista"
+
+#: gitk:3824
+msgid "Remember this view"
+msgstr "Lembrar esta vista"
+
+#: gitk:3825
+msgid "References (space separated list):"
+msgstr "Referências (separar a lista com um espaço):"
+
+#: gitk:3826
+msgid "Branches & tags:"
+msgstr "Ramos & etiquetas:"
+
+#: gitk:3827
+msgid "All refs"
+msgstr "Todas as referências"
+
+#: gitk:3828
+msgid "All (local) branches"
+msgstr "Todos os ramos locais"
+
+#: gitk:3829
+msgid "All tags"
+msgstr "Todas as etiquetas"
+
+#: gitk:3830
+msgid "All remote-tracking branches"
+msgstr "Todos os ramos de rastreio"
+
+#: gitk:3831
+msgid "Commit Info (regular expressions):"
+msgstr "Informações da revisão (expressões regulares):"
+
+#: gitk:3832
+msgid "Author:"
+msgstr "Autor:"
+
+#: gitk:3833
+msgid "Committer:"
+msgstr "Revisor:"
+
+#: gitk:3834
+msgid "Commit Message:"
+msgstr "Descrição da revisão:"
+
+#: gitk:3835
+msgid "Matches all Commit Info criteria"
+msgstr "Coincidir todos os critérios de informações da revisão"
+
+#: gitk:3836
+msgid "Changes to Files:"
+msgstr "Mudanças para os arquivos:"
+
+#: gitk:3837
+msgid "Fixed String"
+msgstr "Texto fixo"
+
+#: gitk:3838
+msgid "Regular Expression"
+msgstr "Expressão regular"
+
+#: gitk:3839
+msgid "Search string:"
+msgstr "Texto de busca"
+
+#: gitk:3840
+msgid ""
+"Commit Dates (\"2 weeks ago\", \"2009-03-17 15:27:38\", \"March 17, 2009 "
+"15:27:38\"):"
+msgstr ""
+"Datas de revisão (\"2 weeks ago\", \"2009-03-17 15:27:38\", \"March 17, 2009 "
+"15:27:38\"):"
+
+#: gitk:3841
+msgid "Since:"
+msgstr "Desde:"
+
+#: gitk:3842
+msgid "Until:"
+msgstr "Até:"
+
+#: gitk:3843
+msgid "Limit and/or skip a number of revisions (positive integer):"
+msgstr "Limitar e/ou ignorar um número de revisões (inteiro positivo):"
+
+#: gitk:3844
+msgid "Number to show:"
+msgstr "Número para mostrar:"
+
+#: gitk:3845
+msgid "Number to skip:"
+msgstr "Número para ignorar:"
+
+#: gitk:3846
+msgid "Miscellaneous options:"
+msgstr "Opções diversas:"
+
+#: gitk:3847
+msgid "Strictly sort by date"
+msgstr "Ordenar estritamente pela data"
+
+#: gitk:3848
+msgid "Mark branch sides"
+msgstr "Marcar os dois lados do ramo"
+
+#: gitk:3849
+msgid "Limit to first parent"
+msgstr "Limitar ao primeiro antecessor"
+
+#: gitk:3850
+msgid "Simple history"
+msgstr "Histórico simplificado"
+
+#: gitk:3851
+msgid "Additional arguments to git log:"
+msgstr "Argumentos adicionais para o 'git log':"
+
+#: gitk:3852
+msgid "Enter files and directories to include, one per line:"
+msgstr "Arquivos e diretórios para incluir, um por linha"
+
+#: gitk:3853
+msgid "Command to generate more commits to include:"
+msgstr "Comando para gerar mais revisões para incluir:"
+
+#: gitk:3977
+msgid "Gitk: edit view"
+msgstr "Gitk: editar vista"
+
+#: gitk:3985
+msgid "-- criteria for selecting revisions"
+msgstr "-- critérios para selecionar revisões"
+
+#: gitk:3990
+msgid "View Name"
+msgstr "Nome da vista"
+
+#: gitk:4065
+msgid "Apply (F5)"
+msgstr "Aplicar (F5)"
+
+#: gitk:4103
+msgid "Error in commit selection arguments:"
+msgstr "Erro nos argumentos de seleção de revisões:"
+
+#: gitk:4156 gitk:4208 gitk:4656 gitk:4670 gitk:5931 gitk:11551 gitk:11552
+msgid "None"
+msgstr "Nenhum"
+
+#: gitk:4604 gitk:6451 gitk:8309 gitk:8324
+msgid "Date"
+msgstr "Data"
+
+#: gitk:4604 gitk:6451
+msgid "CDate"
+msgstr "DataR"
+
+#: gitk:4753 gitk:4758
+msgid "Descendant"
+msgstr "Descendente de"
+
+#: gitk:4754
+msgid "Not descendant"
+msgstr "Não descendente de"
+
+#: gitk:4761 gitk:4766
+msgid "Ancestor"
+msgstr "Antecessor de"
+
+#: gitk:4762
+msgid "Not ancestor"
+msgstr "Não antecessor de"
+
+#: gitk:5052
+msgid "Local changes checked in to index but not committed"
+msgstr "Mudanças locais marcadas, porém não salvas"
+
+#: gitk:5088
+msgid "Local uncommitted changes, not checked in to index"
+msgstr "Mudanças locais não marcadas"
+
+#: gitk:6769
+msgid "many"
+msgstr "muitas"
+
+#: gitk:6952
+msgid "Tags:"
+msgstr "Etiquetas:"
+
+#: gitk:6969 gitk:6975 gitk:8302
+msgid "Parent"
+msgstr "Antecessor"
+
+#: gitk:6980
+msgid "Child"
+msgstr "Descendente"
+
+#: gitk:6989
+msgid "Branch"
+msgstr "Ramo"
+
+#: gitk:6992
+msgid "Follows"
+msgstr "Segue"
+
+#: gitk:6995
+msgid "Precedes"
+msgstr "Precede"
+
+#: gitk:7532
+#, tcl-format
+msgid "Error getting diffs: %s"
+msgstr "Erro ao obter diferenças: %s"
+
+#: gitk:8130
+msgid "Goto:"
+msgstr "Ir para:"
+
+#: gitk:8151
+#, tcl-format
+msgid "Short SHA1 id %s is ambiguous"
+msgstr "O id SHA1 %s é ambíguo"
+
+#: gitk:8158
+#, tcl-format
+msgid "Revision %s is not known"
+msgstr "Revisão %s desconhecida"
+
+#: gitk:8168
+#, tcl-format
+msgid "SHA1 id %s is not known"
+msgstr "Id SHA1 %s desconhecido"
+
+#: gitk:8170
+#, tcl-format
+msgid "Revision %s is not in the current view"
+msgstr "A revisão %s não está na vista atual"
+
+#: gitk:8312
+msgid "Children"
+msgstr "Descendentes"
+
+#: gitk:8370
+#, tcl-format
+msgid "Reset %s branch to here"
+msgstr "Redefinir ramo %s para este ponto"
+
+#: gitk:8372
+msgid "Detached head: can't reset"
+msgstr "Detached head: impossível redefinir"
+
+#: gitk:8481 gitk:8487
+msgid "Skipping merge commit "
+msgstr "Saltando revisão de mesclagem"
+
+#: gitk:8496 gitk:8501
+msgid "Error getting patch ID for "
+msgstr "Erro ao obter patch ID para"
+
+#: gitk:8497 gitk:8502
+msgid " - stopping\n"
+msgstr "- parando\n"
+
+#: gitk:8507 gitk:8510 gitk:8518 gitk:8532 gitk:8541
+msgid "Commit "
+msgstr "Revisão"
+
+#: gitk:8511
+msgid ""
+" is the same patch as\n"
+" "
+msgstr ""
+"é o mesmo patch que\n"
+" "
+
+#: gitk:8519
+msgid ""
+" differs from\n"
+" "
+msgstr "difere de"
+
+#: gitk:8521
+msgid ""
+"Diff of commits:\n"
+"\n"
+msgstr ""
+"Diferença de revisões:\n"
+"\n"
+
+#: gitk:8533 gitk:8542
+#, tcl-format
+msgid " has %s children - stopping\n"
+msgstr "possui %s descendentes - parando\n"
+
+#: gitk:8561
+#, tcl-format
+msgid "Error writing commit to file: %s"
+msgstr "Erro ao salvar revisão para o arquivo: %s"
+
+#: gitk:8567
+#, tcl-format
+msgid "Error diffing commits: %s"
+msgstr "Erro ao comparar revisões: %s"
+
+#: gitk:8598
+msgid "Top"
+msgstr "Início"
+
+#: gitk:8599
+msgid "From"
+msgstr "De"
+
+#: gitk:8604
+msgid "To"
+msgstr "Para"
+
+#: gitk:8628
+msgid "Generate patch"
+msgstr "Gerar patch"
+
+#: gitk:8630
+msgid "From:"
+msgstr "De:"
+
+#: gitk:8639
+msgid "To:"
+msgstr "Para:"
+
+#: gitk:8648
+msgid "Reverse"
+msgstr "Inverter"
+
+#: gitk:8650 gitk:8845
+msgid "Output file:"
+msgstr "Arquivo de saída:"
+
+#: gitk:8656
+msgid "Generate"
+msgstr "Gerar"
+
+#: gitk:8694
+msgid "Error creating patch:"
+msgstr "Erro ao criar patch:"
+
+#: gitk:8717 gitk:8833 gitk:8890
+msgid "ID:"
+msgstr "ID:"
+
+#: gitk:8726
+msgid "Tag name:"
+msgstr "Nome da etiqueta:"
+
+#: gitk:8729
+msgid "Tag message is optional"
+msgstr "A descrição da etiqueta é opcional"
+
+#: gitk:8731
+msgid "Tag message:"
+msgstr "Descrição da etiqueta"
+
+#: gitk:8735 gitk:8899
+msgid "Create"
+msgstr "Criar"
+
+#: gitk:8753
+msgid "No tag name specified"
+msgstr "Nome da etiqueta não indicado"
+
+#: gitk:8757
+#, tcl-format
+msgid "Tag \"%s\" already exists"
+msgstr "Etiqueta \"%s\" já existe"
+
+#: gitk:8767
+msgid "Error creating tag:"
+msgstr "Erro ao criar etiqueta:"
+
+#: gitk:8842
+msgid "Command:"
+msgstr "Comando:"
+
+#: gitk:8850
+msgid "Write"
+msgstr "Exportar"
+
+#: gitk:8868
+msgid "Error writing commit:"
+msgstr "Erro ao exportar revisão"
+
+#: gitk:8895
+msgid "Name:"
+msgstr "Nome:"
+
+#: gitk:8918
+msgid "Please specify a name for the new branch"
+msgstr "Indique um nome para o novo ramo"
+
+#: gitk:8923
+#, tcl-format
+msgid "Branch '%s' already exists. Overwrite?"
+msgstr "O ramo \"%s\" já existe. Sobrescrever?"
+
+#: gitk:8989
+#, tcl-format
+msgid "Commit %s is already included in branch %s -- really re-apply it?"
+msgstr "Revisão %s já inclusa no ramo %s -- você realmente deseja reaplicá-la?"
+
+#: gitk:8994
+msgid "Cherry-picking"
+msgstr "Cherry-picking"
+
+#: gitk:9003
+#, tcl-format
+msgid ""
+"Cherry-pick failed because of local changes to file '%s'.\n"
+"Please commit, reset or stash your changes and try again."
+msgstr ""
+"O cherry-pick falhou porque o arquivo \"%s\" possui mudanças locais.\n"
+"Salve a uma revisão, redefina ou armazene (stash) suas mudanças e tente "
+"novamente."
+
+#: gitk:9009
+msgid ""
+"Cherry-pick failed because of merge conflict.\n"
+"Do you wish to run git citool to resolve it?"
+msgstr ""
+"O cherry-pick falhou porque houve um conflito na mesclagem.\n"
+"Executar o 'git citool' para resolvê-lo?"
+
+#: gitk:9025
+msgid "No changes committed"
+msgstr "Nenhuma revisão foi salva"
+
+#: gitk:9051
+msgid "Confirm reset"
+msgstr "Confirmar redefinição"
+
+#: gitk:9053
+#, tcl-format
+msgid "Reset branch %s to %s?"
+msgstr "Você realmente deseja redefinir o ramo %s para %s?"
+
+#: gitk:9055
+msgid "Reset type:"
+msgstr "Tipo de redefinição"
+
+#: gitk:9058
+msgid "Soft: Leave working tree and index untouched"
+msgstr "Soft: deixa a árvore de trabalho e o índice intocados"
+
+#: gitk:9061
+msgid "Mixed: Leave working tree untouched, reset index"
+msgstr "Misto: Deixa a árvore de trabalho intocada, redefine o índice"
+
+#: gitk:9064
+msgid ""
+"Hard: Reset working tree and index\n"
+"(discard ALL local changes)"
+msgstr ""
+"Hard: Redefine a árvore de trabalho e o índice\n"
+"(descarta TODAS as mudanças locais)"
+
+#: gitk:9081
+msgid "Resetting"
+msgstr "Redefinindo"
+
+#: gitk:9141
+msgid "Checking out"
+msgstr "Abrindo"
+
+#: gitk:9194
+msgid "Cannot delete the currently checked-out branch"
+msgstr "Impossível excluir o ramo atualmente aberto"
+
+#: gitk:9200
+#, tcl-format
+msgid ""
+"The commits on branch %s aren't on any other branch.\n"
+"Really delete branch %s?"
+msgstr ""
+"As revisões do ramo \"%s\" não existem em nenhum outro ramo.\n"
+"Você realmente deseja excluir ramo \"%s\"?"
+
+#: gitk:9231
+#, tcl-format
+msgid "Tags and heads: %s"
+msgstr "Referências: %s"
+
+#: gitk:9246
+msgid "Filter"
+msgstr "Filtro"
+
+#: gitk:9541
+msgid ""
+"Error reading commit topology information; branch and preceding/following "
+"tag information will be incomplete."
+msgstr ""
+"Erro ao ler a topologia das revisões; as informações dos ramos e etiquetas "
+"antecessoras/sucessoras estarão incompletas"
+
+#: gitk:10527
+msgid "Tag"
+msgstr "Etiqueta"
+
+#: gitk:10527
+msgid "Id"
+msgstr "Id"
+
+#: gitk:10576
+msgid "Gitk font chooser"
+msgstr "Selecionar fontes do Gitk"
+
+#: gitk:10593
+msgid "B"
+msgstr "B"
+
+#: gitk:10596
+msgid "I"
+msgstr "I"
+
+#: gitk:10714
+msgid "Gitk preferences"
+msgstr "Preferências do Gitk"
+
+#: gitk:10716
+msgid "Commit list display options"
+msgstr "Opções da lista de revisões"
+
+#: gitk:10719
+msgid "Maximum graph width (lines)"
+msgstr "Largura máxima do grafo (linhas)"
+
+#: gitk:10722
+#, tcl-format
+msgid "Maximum graph width (% of pane)"
+msgstr "Largura máxima do grafo (% do painel)"
+
+#: gitk:10725
+msgid "Show local changes"
+msgstr "Exibir mudanças locais"
+
+#: gitk:10728
+msgid "Auto-select SHA1"
+msgstr "Selecionar o SHA1 automaticamente"
+
+#: gitk:10731
+msgid "Hide remote refs"
+msgstr "Ocultar referências remotas"
+
+#: gitk:10735
+msgid "Diff display options"
+msgstr "Opções de exibição das alterações"
+
+#: gitk:10737
+msgid "Tab spacing"
+msgstr "Espaços por tabulação"
+
+#: gitk:10740
+msgid "Display nearby tags"
+msgstr "Exibir etiquetas próximas"
+
+#: gitk:10743
+msgid "Limit diffs to listed paths"
+msgstr "Limitar diferenças aos caminhos listados"
+
+#: gitk:10746
+msgid "Support per-file encodings"
+msgstr "Usar codificações distintas por arquivo"
+
+#: gitk:10752 gitk:10832
+msgid "External diff tool"
+msgstr "Ferramenta 'diff' externa"
+
+#: gitk:10753
+msgid "Choose..."
+msgstr "Selecionar..."
+
+#: gitk:10758
+msgid "General options"
+msgstr "Opções gerais"
+
+#: gitk:10761
+msgid "Use themed widgets"
+msgstr "Usar temas para as janelas"
+
+#: gitk:10763
+msgid "(change requires restart)"
+msgstr "(exige reinicialização)"
+
+#: gitk:10765
+msgid "(currently unavailable)"
+msgstr "(atualmente indisponível)"
+
+#: gitk:10769
+msgid "Colors: press to choose"
+msgstr "Cores: clique para escolher"
+
+#: gitk:10772
+msgid "Interface"
+msgstr "Interface"
+
+#: gitk:10773
+msgid "interface"
+msgstr "interface"
+
+#: gitk:10776
+msgid "Background"
+msgstr "Segundo plano"
+
+#: gitk:10777 gitk:10807
+msgid "background"
+msgstr "segundo plano"
+
+#: gitk:10780
+msgid "Foreground"
+msgstr "Primeiro plano"
+
+#: gitk:10781
+msgid "foreground"
+msgstr "primeiro plano"
+
+#: gitk:10784
+msgid "Diff: old lines"
+msgstr "Diff: linhas excluídas"
+
+#: gitk:10785
+msgid "diff old lines"
+msgstr "linhas excluídas"
+
+#: gitk:10789
+msgid "Diff: new lines"
+msgstr "Diff: linhas adicionadas"
+
+#: gitk:10790
+msgid "diff new lines"
+msgstr "linhas adicionadas"
+
+#: gitk:10794
+msgid "Diff: hunk header"
+msgstr "Diff: cabeçalho do bloco"
+
+#: gitk:10796
+msgid "diff hunk header"
+msgstr "cabeçalho do bloco"
+
+#: gitk:10800
+msgid "Marked line bg"
+msgstr "2º plano da linha marcada"
+
+#: gitk:10802
+msgid "marked line background"
+msgstr "segundo plano da linha marcada"
+
+#: gitk:10806
+msgid "Select bg"
+msgstr "2º plano da seleção"
+
+#: gitk:10810
+msgid "Fonts: press to choose"
+msgstr "Fontes: clique para escolher"
+
+#: gitk:10812
+msgid "Main font"
+msgstr "Fonte principal"
+
+#: gitk:10813
+msgid "Diff display font"
+msgstr "Fonte da lista de mudanças"
+
+#: gitk:10814
+msgid "User interface font"
+msgstr "Fonte da interface"
+
+#: gitk:10842
+#, tcl-format
+msgid "Gitk: choose color for %s"
+msgstr "Gitk: selecionar cor para %s"
+
+#: gitk:11445
+msgid "Cannot find a git repository here."
+msgstr "Não há nenhum repositório git aqui."
+
+#: gitk:11449
+#, tcl-format
+msgid "Cannot find the git directory \"%s\"."
+msgstr "Impossível encontrar o diretório git \"%s\"."
+
+#: gitk:11496
+#, tcl-format
+msgid "Ambiguous argument '%s': both revision and filename"
+msgstr ""
+"O argumento \"%s\" é ambíguo (especifica tanto uma revisão e um nome de "
+"arquivo)"
+
+#: gitk:11508
+msgid "Bad arguments to gitk:"
+msgstr "Argumentos incorretos para o gitk:"
+
+#: gitk:11604
+msgid "Command line"
+msgstr "Linha de comando"
# Swedish translation for gitk
-# Copyright (C) 2005-2009 Paul Mackerras
+# Copyright (C) 2005-2010 Paul Mackerras
# This file is distributed under the same license as the gitk package.
#
# Peter Krefting <peter@softwolves.pp.se>, 2008-2010.
msgstr ""
"Project-Id-Version: sv\n"
"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2010-01-28 13:16+0100\n"
-"PO-Revision-Date: 2010-01-28 13:48+0100\n"
+"POT-Creation-Date: 2010-09-12 21:14+0100\n"
+"PO-Revision-Date: 2010-09-12 21:16+0100\n"
"Last-Translator: Peter Krefting <peter@softwolves.pp.se>\n"
"Language-Team: Swedish <tp-sv@listor.tp-sv.se>\n"
"MIME-Version: 1.0\n"
msgid "Error parsing revisions:"
msgstr "Fel vid tolkning av revisioner:"
-#: gitk:329
+#: gitk:330
msgid "Error executing --argscmd command:"
msgstr "Fel vid körning av --argscmd-kommando:"
-#: gitk:342
+#: gitk:343
msgid "No files selected: --merge specified but no files are unmerged."
msgstr ""
"Inga filer valdes: --merge angavs men det finns inga filer som inte har "
"slagits samman."
-#: gitk:345
+#: gitk:346
msgid ""
"No files selected: --merge specified but no unmerged files are within file "
"limit."
"Inga filer valdes: --merge angavs men det finns inga filer inom "
"filbegränsningen."
-#: gitk:367 gitk:514
+#: gitk:368 gitk:516
msgid "Error executing git log:"
msgstr "Fel vid körning av git log:"
-#: gitk:385 gitk:530
+#: gitk:386 gitk:532
msgid "Reading"
msgstr "Läser"
-#: gitk:445 gitk:4261
+#: gitk:446 gitk:4271
msgid "Reading commits..."
msgstr "Läser incheckningar..."
-#: gitk:448 gitk:1578 gitk:4264
+#: gitk:449 gitk:1580 gitk:4274
msgid "No commits selected"
msgstr "Inga incheckningar markerade"
-#: gitk:1454
+#: gitk:1456
msgid "Can't parse git log output:"
msgstr "Kan inte tolka utdata från git log:"
-#: gitk:1674
+#: gitk:1676
msgid "No commit information available"
msgstr "Ingen incheckningsinformation är tillgänglig"
-#: gitk:1816
+#: gitk:1818
msgid "mc"
msgstr "mc"
-#: gitk:1851 gitk:4054 gitk:9044 gitk:10585 gitk:10804
+#: gitk:1853 gitk:4064 gitk:9067 gitk:10607 gitk:10817
msgid "OK"
msgstr "OK"
-#: gitk:1853 gitk:4056 gitk:8634 gitk:8713 gitk:8828 gitk:8877 gitk:9046
-#: gitk:10586 gitk:10805
+#: gitk:1855 gitk:4066 gitk:8657 gitk:8736 gitk:8851 gitk:8900 gitk:9069
+#: gitk:10608 gitk:10818
msgid "Cancel"
msgstr "Avbryt"
-#: gitk:1975
+#: gitk:1980
msgid "Update"
msgstr "Uppdatera"
-#: gitk:1976
+#: gitk:1981
msgid "Reload"
msgstr "Ladda om"
-#: gitk:1977
+#: gitk:1982
msgid "Reread references"
msgstr "Läs om referenser"
-#: gitk:1978
+#: gitk:1983
msgid "List references"
msgstr "Visa referenser"
-#: gitk:1980
+#: gitk:1985
msgid "Start git gui"
msgstr "Starta git gui"
-#: gitk:1982
+#: gitk:1987
msgid "Quit"
msgstr "Avsluta"
-#: gitk:1974
+#: gitk:1979
msgid "File"
msgstr "Arkiv"
-#: gitk:1986
+#: gitk:1991
msgid "Preferences"
msgstr "Inställningar"
-#: gitk:1985
+#: gitk:1990
msgid "Edit"
msgstr "Redigera"
-#: gitk:1990
+#: gitk:1995
msgid "New view..."
msgstr "Ny vy..."
-#: gitk:1991
+#: gitk:1996
msgid "Edit view..."
msgstr "Ändra vy..."
-#: gitk:1992
+#: gitk:1997
msgid "Delete view"
msgstr "Ta bort vy"
-#: gitk:1994
+#: gitk:1999
msgid "All files"
msgstr "Alla filer"
-#: gitk:1989 gitk:3808
+#: gitk:1994 gitk:3817
msgid "View"
msgstr "Visa"
-#: gitk:1999 gitk:2009 gitk:2780
+#: gitk:2004 gitk:2014 gitk:2787
msgid "About gitk"
msgstr "Om gitk"
-#: gitk:2000 gitk:2014
+#: gitk:2005 gitk:2019
msgid "Key bindings"
msgstr "Tangentbordsbindningar"
-#: gitk:1998 gitk:2013
+#: gitk:2003 gitk:2018
msgid "Help"
msgstr "Hjälp"
-#: gitk:2091 gitk:8110
+#: gitk:2096 gitk:8132
msgid "SHA1 ID:"
msgstr "SHA1-id:"
-#: gitk:2122
+#: gitk:2127
msgid "Row"
msgstr "Rad"
-#: gitk:2160
+#: gitk:2165
msgid "Find"
msgstr "Sök"
-#: gitk:2161
+#: gitk:2166
msgid "next"
msgstr "nästa"
-#: gitk:2162
+#: gitk:2167
msgid "prev"
msgstr "föreg"
-#: gitk:2163
+#: gitk:2168
msgid "commit"
msgstr "incheckning"
-#: gitk:2166 gitk:2168 gitk:4422 gitk:4445 gitk:4469 gitk:6410 gitk:6482
-#: gitk:6566
+#: gitk:2171 gitk:2173 gitk:4432 gitk:4455 gitk:4479 gitk:6420 gitk:6492
+#: gitk:6576
msgid "containing:"
msgstr "som innehåller:"
-#: gitk:2169 gitk:3290 gitk:3295 gitk:4497
+#: gitk:2174 gitk:3298 gitk:3303 gitk:4507
msgid "touching paths:"
msgstr "som rör sökväg:"
-#: gitk:2170 gitk:4502
+#: gitk:2175 gitk:4512
msgid "adding/removing string:"
msgstr "som lägger/till tar bort sträng:"
-#: gitk:2179 gitk:2181
+#: gitk:2184 gitk:2186
msgid "Exact"
msgstr "Exakt"
-#: gitk:2181 gitk:4577 gitk:6378
+#: gitk:2186 gitk:4587 gitk:6388
msgid "IgnCase"
msgstr "IgnVersaler"
-#: gitk:2181 gitk:4471 gitk:4575 gitk:6374
+#: gitk:2186 gitk:4481 gitk:4585 gitk:6384
msgid "Regexp"
msgstr "Reg.uttr."
-#: gitk:2183 gitk:2184 gitk:4596 gitk:4626 gitk:4633 gitk:6502 gitk:6570
+#: gitk:2188 gitk:2189 gitk:4606 gitk:4636 gitk:4643 gitk:6512 gitk:6580
msgid "All fields"
msgstr "Alla fält"
-#: gitk:2184 gitk:4594 gitk:4626 gitk:6441
+#: gitk:2189 gitk:4604 gitk:4636 gitk:6451
msgid "Headline"
msgstr "Rubrik"
-#: gitk:2185 gitk:4594 gitk:6441 gitk:6570 gitk:7003
+#: gitk:2190 gitk:4604 gitk:6451 gitk:6580 gitk:7013
msgid "Comments"
msgstr "Kommentarer"
-#: gitk:2185 gitk:4594 gitk:4598 gitk:4633 gitk:6441 gitk:6938 gitk:8285
-#: gitk:8300
+#: gitk:2190 gitk:4604 gitk:4608 gitk:4643 gitk:6451 gitk:6948 gitk:8307
+#: gitk:8322
msgid "Author"
msgstr "Författare"
-#: gitk:2185 gitk:4594 gitk:6441 gitk:6940
+#: gitk:2190 gitk:4604 gitk:6451 gitk:6950
msgid "Committer"
msgstr "Incheckare"
-#: gitk:2216
+#: gitk:2221
msgid "Search"
msgstr "Sök"
-#: gitk:2224
+#: gitk:2229
msgid "Diff"
msgstr "Diff"
-#: gitk:2226
+#: gitk:2231
msgid "Old version"
msgstr "Gammal version"
-#: gitk:2228
+#: gitk:2233
msgid "New version"
msgstr "Ny version"
-#: gitk:2230
+#: gitk:2235
msgid "Lines of context"
msgstr "Rader sammanhang"
-#: gitk:2240
+#: gitk:2245
msgid "Ignore space change"
msgstr "Ignorera ändringar i blanksteg"
-#: gitk:2299
+#: gitk:2304
msgid "Patch"
msgstr "Patch"
-#: gitk:2301
+#: gitk:2306
msgid "Tree"
msgstr "Träd"
-#: gitk:2456 gitk:2473
+#: gitk:2463 gitk:2480
msgid "Diff this -> selected"
msgstr "Diff denna -> markerad"
-#: gitk:2457 gitk:2474
+#: gitk:2464 gitk:2481
msgid "Diff selected -> this"
msgstr "Diff markerad -> denna"
-#: gitk:2458 gitk:2475
+#: gitk:2465 gitk:2482
msgid "Make patch"
msgstr "Skapa patch"
-#: gitk:2459 gitk:8692
+#: gitk:2466 gitk:8715
msgid "Create tag"
msgstr "Skapa tagg"
-#: gitk:2460 gitk:8808
+#: gitk:2467 gitk:8831
msgid "Write commit to file"
msgstr "Skriv incheckning till fil"
-#: gitk:2461 gitk:8865
+#: gitk:2468 gitk:8888
msgid "Create new branch"
msgstr "Skapa ny gren"
-#: gitk:2462
+#: gitk:2469
msgid "Cherry-pick this commit"
msgstr "Plocka denna incheckning"
-#: gitk:2463
+#: gitk:2470
msgid "Reset HEAD branch to here"
msgstr "Återställ HEAD-grenen hit"
-#: gitk:2464
+#: gitk:2471
msgid "Mark this commit"
msgstr "Markera denna incheckning"
-#: gitk:2465
+#: gitk:2472
msgid "Return to mark"
msgstr "Återgå till markering"
-#: gitk:2466
+#: gitk:2473
msgid "Find descendant of this and mark"
msgstr "Hitta efterföljare till denna och markera"
-#: gitk:2467
+#: gitk:2474
msgid "Compare with marked commit"
msgstr "Jämför med markerad incheckning"
-#: gitk:2481
+#: gitk:2488
msgid "Check out this branch"
msgstr "Checka ut denna gren"
-#: gitk:2482
+#: gitk:2489
msgid "Remove this branch"
msgstr "Ta bort denna gren"
-#: gitk:2489
+#: gitk:2496
msgid "Highlight this too"
msgstr "Markera även detta"
-#: gitk:2490
+#: gitk:2497
msgid "Highlight this only"
msgstr "Markera bara detta"
-#: gitk:2491
+#: gitk:2498
msgid "External diff"
msgstr "Extern diff"
-#: gitk:2492
+#: gitk:2499
msgid "Blame parent commit"
msgstr "Klandra föräldraincheckning"
-#: gitk:2499
+#: gitk:2506
msgid "Show origin of this line"
msgstr "Visa ursprunget för den här raden"
-#: gitk:2500
+#: gitk:2507
msgid "Run git gui blame on this line"
msgstr "Kör git gui blame på den här raden"
-#: gitk:2782
+#: gitk:2789
msgid ""
"\n"
"Gitk - a commit viewer for git\n"
"\n"
-"Copyright \\u00a9 2005-2010 Paul Mackerras\n"
+"Copyright ©9 2005-2010 Paul Mackerras\n"
"\n"
"Use and redistribute under the terms of the GNU General Public License"
msgstr ""
"\n"
"Gitk - en incheckningsvisare för git\n"
"\n"
-"Copyright \\u00a9 2005-2010 Paul Mackerras\n"
+"Copyright ©9 2005-2010 Paul Mackerras\n"
"\n"
"Använd och vidareförmedla enligt villkoren i GNU General Public License"
-#: gitk:2790 gitk:2854 gitk:9230
+#: gitk:2797 gitk:2862 gitk:9253
msgid "Close"
msgstr "Stäng"
-#: gitk:2811
+#: gitk:2818
msgid "Gitk key bindings"
msgstr "Tangentbordsbindningar för Gitk"
-#: gitk:2814
+#: gitk:2821
msgid "Gitk key bindings:"
msgstr "Tangentbordsbindningar för Gitk:"
-#: gitk:2816
+#: gitk:2823
#, tcl-format
msgid "<%s-Q>\t\tQuit"
msgstr "<%s-Q>\t\tAvsluta"
-#: gitk:2817
+#: gitk:2824
+#, tcl-format
+msgid "<%s-W>\t\tClose window"
+msgstr "<%s-W>\t\tStäng fönster"
+
+#: gitk:2825
msgid "<Home>\t\tMove to first commit"
msgstr "<Home>\t\tGå till första incheckning"
-#: gitk:2818
+#: gitk:2826
msgid "<End>\t\tMove to last commit"
msgstr "<End>\t\tGå till sista incheckning"
-#: gitk:2819
+#: gitk:2827
msgid "<Up>, p, i\tMove up one commit"
msgstr "<Upp>, p, i\tGå en incheckning upp"
-#: gitk:2820
+#: gitk:2828
msgid "<Down>, n, k\tMove down one commit"
msgstr "<Ned>, n, k\tGå en incheckning ned"
-#: gitk:2821
+#: gitk:2829
msgid "<Left>, z, j\tGo back in history list"
msgstr "<Vänster>, z, j\tGå bakåt i historiken"
-#: gitk:2822
+#: gitk:2830
msgid "<Right>, x, l\tGo forward in history list"
msgstr "<Höger>, x, l\tGå framåt i historiken"
-#: gitk:2823
+#: gitk:2831
msgid "<PageUp>\tMove up one page in commit list"
msgstr "<PageUp>\tGå upp en sida i incheckningslistan"
-#: gitk:2824
+#: gitk:2832
msgid "<PageDown>\tMove down one page in commit list"
msgstr "<PageDown>\tGå ned en sida i incheckningslistan"
-#: gitk:2825
+#: gitk:2833
#, tcl-format
msgid "<%s-Home>\tScroll to top of commit list"
msgstr "<%s-Home>\tRulla till början av incheckningslistan"
-#: gitk:2826
+#: gitk:2834
#, tcl-format
msgid "<%s-End>\tScroll to bottom of commit list"
msgstr "<%s-End>\tRulla till slutet av incheckningslistan"
-#: gitk:2827
+#: gitk:2835
#, tcl-format
msgid "<%s-Up>\tScroll commit list up one line"
msgstr "<%s-Upp>\tRulla incheckningslistan upp ett steg"
-#: gitk:2828
+#: gitk:2836
#, tcl-format
msgid "<%s-Down>\tScroll commit list down one line"
msgstr "<%s-Ned>\tRulla incheckningslistan ned ett steg"
-#: gitk:2829
+#: gitk:2837
#, tcl-format
msgid "<%s-PageUp>\tScroll commit list up one page"
msgstr "<%s-PageUp>\tRulla incheckningslistan upp en sida"
-#: gitk:2830
+#: gitk:2838
#, tcl-format
msgid "<%s-PageDown>\tScroll commit list down one page"
msgstr "<%s-PageDown>\tRulla incheckningslistan ned en sida"
-#: gitk:2831
+#: gitk:2839
msgid "<Shift-Up>\tFind backwards (upwards, later commits)"
msgstr "<Skift-Upp>\tSök bakåt (uppåt, senare incheckningar)"
-#: gitk:2832
+#: gitk:2840
msgid "<Shift-Down>\tFind forwards (downwards, earlier commits)"
msgstr "<Skift-Ned>\tSök framåt (nedåt, tidigare incheckningar)"
-#: gitk:2833
+#: gitk:2841
msgid "<Delete>, b\tScroll diff view up one page"
msgstr "<Delete>, b\tRulla diffvisningen upp en sida"
-#: gitk:2834
+#: gitk:2842
msgid "<Backspace>\tScroll diff view up one page"
msgstr "<Baksteg>\tRulla diffvisningen upp en sida"
-#: gitk:2835
+#: gitk:2843
msgid "<Space>\t\tScroll diff view down one page"
msgstr "<Blanksteg>\tRulla diffvisningen ned en sida"
-#: gitk:2836
+#: gitk:2844
msgid "u\t\tScroll diff view up 18 lines"
msgstr "u\t\tRulla diffvisningen upp 18 rader"
-#: gitk:2837
+#: gitk:2845
msgid "d\t\tScroll diff view down 18 lines"
msgstr "d\t\tRulla diffvisningen ned 18 rader"
-#: gitk:2838
+#: gitk:2846
#, tcl-format
msgid "<%s-F>\t\tFind"
msgstr "<%s-F>\t\tSök"
-#: gitk:2839
+#: gitk:2847
#, tcl-format
msgid "<%s-G>\t\tMove to next find hit"
msgstr "<%s-G>\t\tGå till nästa sökträff"
-#: gitk:2840
+#: gitk:2848
msgid "<Return>\tMove to next find hit"
msgstr "<Return>\t\tGå till nästa sökträff"
-#: gitk:2841
+#: gitk:2849
msgid "/\t\tFocus the search box"
msgstr "/\t\tFokusera sökrutan"
-#: gitk:2842
+#: gitk:2850
msgid "?\t\tMove to previous find hit"
msgstr "?\t\tGå till föregående sökträff"
-#: gitk:2843
+#: gitk:2851
msgid "f\t\tScroll diff view to next file"
msgstr "f\t\tRulla diffvisningen till nästa fil"
-#: gitk:2844
+#: gitk:2852
#, tcl-format
msgid "<%s-S>\t\tSearch for next hit in diff view"
msgstr "<%s-S>\t\tGå till nästa sökträff i diffvisningen"
-#: gitk:2845
+#: gitk:2853
#, tcl-format
msgid "<%s-R>\t\tSearch for previous hit in diff view"
msgstr "<%s-R>\t\tGå till föregående sökträff i diffvisningen"
-#: gitk:2846
+#: gitk:2854
#, tcl-format
msgid "<%s-KP+>\tIncrease font size"
msgstr "<%s-Num+>\tÖka teckenstorlek"
-#: gitk:2847
+#: gitk:2855
#, tcl-format
msgid "<%s-plus>\tIncrease font size"
msgstr "<%s-plus>\tÖka teckenstorlek"
-#: gitk:2848
+#: gitk:2856
#, tcl-format
msgid "<%s-KP->\tDecrease font size"
msgstr "<%s-Num->\tMinska teckenstorlek"
-#: gitk:2849
+#: gitk:2857
#, tcl-format
msgid "<%s-minus>\tDecrease font size"
msgstr "<%s-minus>\tMinska teckenstorlek"
-#: gitk:2850
+#: gitk:2858
msgid "<F5>\t\tUpdate"
msgstr "<F5>\t\tUppdatera"
-#: gitk:3305 gitk:3314
+#: gitk:3313 gitk:3322
#, tcl-format
msgid "Error creating temporary directory %s:"
msgstr "Fel vid skapande av temporär katalog %s:"
-#: gitk:3327
+#: gitk:3335
#, tcl-format
msgid "Error getting \"%s\" from %s:"
msgstr "Fel vid hämtning av \"%s\" från %s:"
-#: gitk:3390
+#: gitk:3398
msgid "command failed:"
msgstr "kommando misslyckades:"
-#: gitk:3539
+#: gitk:3547
msgid "No such commit"
msgstr "Incheckning saknas"
-#: gitk:3553
+#: gitk:3561
msgid "git gui blame: command failed:"
msgstr "git gui blame: kommando misslyckades:"
-#: gitk:3584
+#: gitk:3592
#, tcl-format
msgid "Couldn't read merge head: %s"
msgstr "Kunde inte läsa sammanslagningshuvud: %s"
-#: gitk:3592
+#: gitk:3600
#, tcl-format
msgid "Error reading index: %s"
msgstr "Fel vid läsning av index: %s"
-#: gitk:3617
+#: gitk:3625
#, tcl-format
msgid "Couldn't start git blame: %s"
msgstr "Kunde inte starta git blame: %s"
-#: gitk:3620 gitk:6409
+#: gitk:3628 gitk:6419
msgid "Searching"
msgstr "Söker"
-#: gitk:3652
+#: gitk:3660
#, tcl-format
msgid "Error running git blame: %s"
msgstr "Fel vid körning av git blame: %s"
-#: gitk:3680
+#: gitk:3688
#, tcl-format
msgid "That line comes from commit %s, which is not in this view"
msgstr "Raden kommer från incheckningen %s, som inte finns i denna vy"
-#: gitk:3694
+#: gitk:3702
msgid "External diff viewer failed:"
msgstr "Externt diff-verktyg misslyckades:"
-#: gitk:3812
+#: gitk:3820
msgid "Gitk view definition"
msgstr "Definition av Gitk-vy"
-#: gitk:3816
+#: gitk:3824
msgid "Remember this view"
msgstr "Spara denna vy"
-#: gitk:3817
+#: gitk:3825
msgid "References (space separated list):"
msgstr "Referenser (blankstegsavdelad lista):"
-#: gitk:3818
+#: gitk:3826
msgid "Branches & tags:"
msgstr "Grenar & taggar:"
-#: gitk:3819
+#: gitk:3827
msgid "All refs"
msgstr "Alla referenser"
-#: gitk:3820
+#: gitk:3828
msgid "All (local) branches"
msgstr "Alla (lokala) grenar"
-#: gitk:3821
+#: gitk:3829
msgid "All tags"
msgstr "Alla taggar"
-#: gitk:3822
+#: gitk:3830
msgid "All remote-tracking branches"
msgstr "Alla fjärrspårande grenar"
-#: gitk:3823
+#: gitk:3831
msgid "Commit Info (regular expressions):"
msgstr "Incheckningsinfo (reguljära uttryck):"
-#: gitk:3824
+#: gitk:3832
msgid "Author:"
msgstr "Författare:"
-#: gitk:3825
+#: gitk:3833
msgid "Committer:"
msgstr "Incheckare:"
-#: gitk:3826
+#: gitk:3834
msgid "Commit Message:"
msgstr "Incheckningsmeddelande:"
-#: gitk:3827
+#: gitk:3835
msgid "Matches all Commit Info criteria"
msgstr "Motsvarar alla kriterier för incheckningsinfo"
-#: gitk:3828
+#: gitk:3836
msgid "Changes to Files:"
msgstr "Ändringar av filer:"
-#: gitk:3829
+#: gitk:3837
msgid "Fixed String"
msgstr "Fast sträng"
-#: gitk:3830
+#: gitk:3838
msgid "Regular Expression"
msgstr "Reguljärt uttryck"
-#: gitk:3831
+#: gitk:3839
msgid "Search string:"
msgstr "Söksträng:"
-#: gitk:3832
+#: gitk:3840
msgid ""
"Commit Dates (\"2 weeks ago\", \"2009-03-17 15:27:38\", \"March 17, 2009 "
"15:27:38\"):"
"Incheckingsdatum (\"2 weeks ago\", \"2009-03-17 15:27:38\", \"March 17, 2009 "
"15:27:38\"):"
-#: gitk:3833
+#: gitk:3841
msgid "Since:"
msgstr "Från:"
-#: gitk:3834
+#: gitk:3842
msgid "Until:"
msgstr "Till:"
-#: gitk:3835
+#: gitk:3843
msgid "Limit and/or skip a number of revisions (positive integer):"
msgstr "Begränsa och/eller hoppa över ett antal revisioner (positivt heltal):"
-#: gitk:3836
+#: gitk:3844
msgid "Number to show:"
msgstr "Antal att visa:"
-#: gitk:3837
+#: gitk:3845
msgid "Number to skip:"
msgstr "Antal att hoppa över:"
-#: gitk:3838
+#: gitk:3846
msgid "Miscellaneous options:"
msgstr "Diverse alternativ:"
-#: gitk:3839
+#: gitk:3847
msgid "Strictly sort by date"
msgstr "Strikt datumsortering"
-#: gitk:3840
+#: gitk:3848
msgid "Mark branch sides"
msgstr "Markera sidogrenar"
-#: gitk:3841
+#: gitk:3849
msgid "Limit to first parent"
msgstr "Begränsa till första förälder"
-#: gitk:3842
+#: gitk:3850
msgid "Simple history"
msgstr "Enkel historik"
-#: gitk:3843
+#: gitk:3851
msgid "Additional arguments to git log:"
msgstr "Ytterligare argument till git log:"
-#: gitk:3844
+#: gitk:3852
msgid "Enter files and directories to include, one per line:"
msgstr "Ange filer och kataloger att ta med, en per rad:"
-#: gitk:3845
+#: gitk:3853
msgid "Command to generate more commits to include:"
msgstr "Kommando för att generera fler incheckningar att ta med:"
-#: gitk:3967
+#: gitk:3977
msgid "Gitk: edit view"
msgstr "Gitk: redigera vy"
-#: gitk:3975
+#: gitk:3985
msgid "-- criteria for selecting revisions"
msgstr " - kriterier för val av revisioner"
-#: gitk:3980
+#: gitk:3990
msgid "View Name"
msgstr "Namn på vy"
-#: gitk:4055
+#: gitk:4065
msgid "Apply (F5)"
msgstr "Använd (F5)"
-#: gitk:4093
+#: gitk:4103
msgid "Error in commit selection arguments:"
msgstr "Fel i argument för val av incheckningar:"
-#: gitk:4146 gitk:4198 gitk:4646 gitk:4660 gitk:5921 gitk:11534 gitk:11535
+#: gitk:4156 gitk:4208 gitk:4656 gitk:4670 gitk:5931 gitk:11551 gitk:11552
msgid "None"
msgstr "Inget"
-#: gitk:4594 gitk:6441 gitk:8287 gitk:8302
+#: gitk:4604 gitk:6451 gitk:8309 gitk:8324
msgid "Date"
msgstr "Datum"
-#: gitk:4594 gitk:6441
+#: gitk:4604 gitk:6451
msgid "CDate"
msgstr "Skapat datum"
-#: gitk:4743 gitk:4748
+#: gitk:4753 gitk:4758
msgid "Descendant"
msgstr "Avkomling"
-#: gitk:4744
+#: gitk:4754
msgid "Not descendant"
msgstr "Inte avkomling"
-#: gitk:4751 gitk:4756
+#: gitk:4761 gitk:4766
msgid "Ancestor"
msgstr "Förfader"
-#: gitk:4752
+#: gitk:4762
msgid "Not ancestor"
msgstr "Inte förfader"
-#: gitk:5042
+#: gitk:5052
msgid "Local changes checked in to index but not committed"
msgstr "Lokala ändringar sparade i indexet men inte incheckade"
-#: gitk:5078
+#: gitk:5088
msgid "Local uncommitted changes, not checked in to index"
msgstr "Lokala ändringar, ej sparade i indexet"
-#: gitk:6759
+#: gitk:6769
msgid "many"
msgstr "många"
-#: gitk:6942
+#: gitk:6952
msgid "Tags:"
msgstr "Taggar:"
-#: gitk:6959 gitk:6965 gitk:8280
+#: gitk:6969 gitk:6975 gitk:8302
msgid "Parent"
msgstr "Förälder"
-#: gitk:6970
+#: gitk:6980
msgid "Child"
msgstr "Barn"
-#: gitk:6979
+#: gitk:6989
msgid "Branch"
msgstr "Gren"
-#: gitk:6982
+#: gitk:6992
msgid "Follows"
msgstr "Följer"
-#: gitk:6985
+#: gitk:6995
msgid "Precedes"
msgstr "Föregår"
-#: gitk:7522
+#: gitk:7532
#, tcl-format
msgid "Error getting diffs: %s"
msgstr "Fel vid hämtning av diff: %s"
-#: gitk:8108
+#: gitk:8130
msgid "Goto:"
msgstr "Gå till:"
-#: gitk:8129
+#: gitk:8151
#, tcl-format
msgid "Short SHA1 id %s is ambiguous"
msgstr "Förkortat SHA1-id %s är tvetydigt"
-#: gitk:8136
+#: gitk:8158
#, tcl-format
msgid "Revision %s is not known"
msgstr "Revisionen %s är inte känd"
-#: gitk:8146
+#: gitk:8168
#, tcl-format
msgid "SHA1 id %s is not known"
msgstr "SHA-id:t %s är inte känt"
-#: gitk:8148
+#: gitk:8170
#, tcl-format
msgid "Revision %s is not in the current view"
msgstr "Revisionen %s finns inte i den nuvarande vyn"
-#: gitk:8290
+#: gitk:8312
msgid "Children"
msgstr "Barn"
-#: gitk:8348
+#: gitk:8370
#, tcl-format
msgid "Reset %s branch to here"
msgstr "Återställ grenen %s hit"
-#: gitk:8350
+#: gitk:8372
msgid "Detached head: can't reset"
msgstr "Frånkopplad head: kan inte återställa"
-#: gitk:8459 gitk:8465
+#: gitk:8481 gitk:8487
msgid "Skipping merge commit "
msgstr "Hoppar över sammanslagningsincheckning "
-#: gitk:8474 gitk:8479
+#: gitk:8496 gitk:8501
msgid "Error getting patch ID for "
msgstr "Fel vid hämtning av patch-id för "
-#: gitk:8475 gitk:8480
+#: gitk:8497 gitk:8502
msgid " - stopping\n"
msgstr " - stannar\n"
-#: gitk:8485 gitk:8488 gitk:8496 gitk:8510 gitk:8519
+#: gitk:8507 gitk:8510 gitk:8518 gitk:8532 gitk:8541
msgid "Commit "
msgstr "Incheckning "
-#: gitk:8489
+#: gitk:8511
msgid ""
" is the same patch as\n"
" "
" är samma patch som\n"
" "
-#: gitk:8497
+#: gitk:8519
msgid ""
" differs from\n"
" "
" skiljer sig från\n"
" "
-#: gitk:8499
+#: gitk:8521
msgid ""
"Diff of commits:\n"
"\n"
-msgstr "Skillnad mellan incheckningar:\n"
+msgstr ""
+"Skillnad mellan incheckningar:\n"
"\n"
-""
-#: gitk:8511 gitk:8520
+#: gitk:8533 gitk:8542
#, tcl-format
msgid " has %s children - stopping\n"
msgstr " har %s barn - stannar\n"
-#: gitk:8539
+#: gitk:8561
#, tcl-format
msgid "Error writing commit to file: %s"
msgstr "Fel vid skrivning av incheckning till fil: %s"
-#: gitk:8545
+#: gitk:8567
#, tcl-format
msgid "Error diffing commits: %s"
msgstr "Fel vid jämförelse av incheckningar: %s"
-#: gitk:8575
+#: gitk:8598
msgid "Top"
msgstr "Topp"
-#: gitk:8576
+#: gitk:8599
msgid "From"
msgstr "Från"
-#: gitk:8581
+#: gitk:8604
msgid "To"
msgstr "Till"
-#: gitk:8605
+#: gitk:8628
msgid "Generate patch"
msgstr "Generera patch"
-#: gitk:8607
+#: gitk:8630
msgid "From:"
msgstr "Från:"
-#: gitk:8616
+#: gitk:8639
msgid "To:"
msgstr "Till:"
-#: gitk:8625
+#: gitk:8648
msgid "Reverse"
msgstr "Vänd"
-#: gitk:8627 gitk:8822
+#: gitk:8650 gitk:8845
msgid "Output file:"
msgstr "Utdatafil:"
-#: gitk:8633
+#: gitk:8656
msgid "Generate"
msgstr "Generera"
-#: gitk:8671
+#: gitk:8694
msgid "Error creating patch:"
msgstr "Fel vid generering av patch:"
-#: gitk:8694 gitk:8810 gitk:8867
+#: gitk:8717 gitk:8833 gitk:8890
msgid "ID:"
msgstr "Id:"
-#: gitk:8703
+#: gitk:8726
msgid "Tag name:"
msgstr "Taggnamn:"
-#: gitk:8706
+#: gitk:8729
msgid "Tag message is optional"
msgstr "Taggmeddelandet är valfritt"
-#: gitk:8708
+#: gitk:8731
msgid "Tag message:"
msgstr "Taggmeddelande:"
-#: gitk:8712 gitk:8876
+#: gitk:8735 gitk:8899
msgid "Create"
msgstr "Skapa"
-#: gitk:8730
+#: gitk:8753
msgid "No tag name specified"
msgstr "Inget taggnamn angavs"
-#: gitk:8734
+#: gitk:8757
#, tcl-format
msgid "Tag \"%s\" already exists"
msgstr "Taggen \"%s\" finns redan"
-#: gitk:8744
+#: gitk:8767
msgid "Error creating tag:"
msgstr "Fel vid skapande av tagg:"
-#: gitk:8819
+#: gitk:8842
msgid "Command:"
msgstr "Kommando:"
-#: gitk:8827
+#: gitk:8850
msgid "Write"
msgstr "Skriv"
-#: gitk:8845
+#: gitk:8868
msgid "Error writing commit:"
msgstr "Fel vid skrivning av incheckning:"
-#: gitk:8872
+#: gitk:8895
msgid "Name:"
msgstr "Namn:"
-#: gitk:8895
+#: gitk:8918
msgid "Please specify a name for the new branch"
msgstr "Ange ett namn för den nya grenen"
-#: gitk:8900
+#: gitk:8923
#, tcl-format
msgid "Branch '%s' already exists. Overwrite?"
msgstr "Grenen \"%s\" finns redan. Skriva över?"
-#: gitk:8966
+#: gitk:8989
#, tcl-format
msgid "Commit %s is already included in branch %s -- really re-apply it?"
msgstr ""
"Incheckningen %s finns redan på grenen %s -- skall den verkligen appliceras "
"på nytt?"
-#: gitk:8971
+#: gitk:8994
msgid "Cherry-picking"
msgstr "Plockar"
-#: gitk:8980
+#: gitk:9003
#, tcl-format
msgid ""
"Cherry-pick failed because of local changes to file '%s'.\n"
"Checka in, återställ eller spara undan (stash) dina ändringar och försök "
"igen."
-#: gitk:8986
+#: gitk:9009
msgid ""
"Cherry-pick failed because of merge conflict.\n"
"Do you wish to run git citool to resolve it?"
"Cherry-pick misslyckades på grund av en sammanslagningskonflikt.\n"
"Vill du köra git citool för att lösa den?"
-#: gitk:9002
+#: gitk:9025
msgid "No changes committed"
msgstr "Inga ändringar incheckade"
-#: gitk:9028
+#: gitk:9051
msgid "Confirm reset"
msgstr "Bekräfta återställning"
-#: gitk:9030
+#: gitk:9053
#, tcl-format
msgid "Reset branch %s to %s?"
msgstr "Återställa grenen %s till %s?"
-#: gitk:9032
+#: gitk:9055
msgid "Reset type:"
msgstr "Typ av återställning:"
-#: gitk:9035
+#: gitk:9058
msgid "Soft: Leave working tree and index untouched"
msgstr "Mjuk: Rör inte utcheckning och index"
-#: gitk:9038
+#: gitk:9061
msgid "Mixed: Leave working tree untouched, reset index"
msgstr "Blandad: Rör inte utcheckning, återställ index"
-#: gitk:9041
+#: gitk:9064
msgid ""
"Hard: Reset working tree and index\n"
"(discard ALL local changes)"
"Hård: Återställ utcheckning och index\n"
"(förkastar ALLA lokala ändringar)"
-#: gitk:9058
+#: gitk:9081
msgid "Resetting"
msgstr "Återställer"
-#: gitk:9118
+#: gitk:9141
msgid "Checking out"
msgstr "Checkar ut"
-#: gitk:9171
+#: gitk:9194
msgid "Cannot delete the currently checked-out branch"
msgstr "Kan inte ta bort den just nu utcheckade grenen"
-#: gitk:9177
+#: gitk:9200
#, tcl-format
msgid ""
"The commits on branch %s aren't on any other branch.\n"
"Incheckningarna på grenen %s existerar inte på någon annan gren.\n"
"Vill du verkligen ta bort grenen %s?"
-#: gitk:9208
+#: gitk:9231
#, tcl-format
msgid "Tags and heads: %s"
msgstr "Taggar och huvuden: %s"
-#: gitk:9223
+#: gitk:9246
msgid "Filter"
msgstr "Filter"
-#: gitk:9518
+#: gitk:9541
msgid ""
"Error reading commit topology information; branch and preceding/following "
"tag information will be incomplete."
"Fel vid läsning av information om incheckningstopologi; information om "
"grenar och föregående/senare taggar kommer inte vara komplett."
-#: gitk:10504
+#: gitk:10527
msgid "Tag"
msgstr "Tagg"
-#: gitk:10504
+#: gitk:10527
msgid "Id"
msgstr "Id"
-#: gitk:10554
+#: gitk:10576
msgid "Gitk font chooser"
msgstr "Teckensnittsväljare för Gitk"
-#: gitk:10571
+#: gitk:10593
msgid "B"
msgstr "F"
-#: gitk:10574
+#: gitk:10596
msgid "I"
msgstr "K"
-#: gitk:10692
+#: gitk:10714
msgid "Gitk preferences"
msgstr "Inställningar för Gitk"
-#: gitk:10694
+#: gitk:10716
msgid "Commit list display options"
msgstr "Alternativ för incheckningslistvy"
-#: gitk:10697
+#: gitk:10719
msgid "Maximum graph width (lines)"
msgstr "Maximal grafbredd (rader)"
-#: gitk:10700
+#: gitk:10722
#, tcl-format
msgid "Maximum graph width (% of pane)"
msgstr "Maximal grafbredd (% av ruta)"
-#: gitk:10703
+#: gitk:10725
msgid "Show local changes"
msgstr "Visa lokala ändringar"
-#: gitk:10706
+#: gitk:10728
msgid "Auto-select SHA1"
msgstr "Välj SHA1 automatiskt"
-#: gitk:10709
+#: gitk:10731
msgid "Hide remote refs"
msgstr "Dölj fjärr-referenser"
-#: gitk:10713
+#: gitk:10735
msgid "Diff display options"
msgstr "Alternativ för diffvy"
-#: gitk:10715
+#: gitk:10737
msgid "Tab spacing"
msgstr "Blanksteg för tabulatortecken"
-#: gitk:10718
+#: gitk:10740
msgid "Display nearby tags"
msgstr "Visa närliggande taggar"
-#: gitk:10721
+#: gitk:10743
msgid "Limit diffs to listed paths"
msgstr "Begränsa diff till listade sökvägar"
-#: gitk:10724
+#: gitk:10746
msgid "Support per-file encodings"
msgstr "Stöd för filspecifika teckenkodningar"
-#: gitk:10730 gitk:10819
+#: gitk:10752 gitk:10832
msgid "External diff tool"
msgstr "Externt diff-verktyg"
-#: gitk:10731
+#: gitk:10753
msgid "Choose..."
msgstr "Välj..."
-#: gitk:10736
+#: gitk:10758
msgid "General options"
msgstr "Allmänna inställningar"
-#: gitk:10739
+#: gitk:10761
msgid "Use themed widgets"
msgstr "Använd tema på fönsterelement"
-#: gitk:10741
+#: gitk:10763
msgid "(change requires restart)"
msgstr "(ändringen kräver omstart)"
-#: gitk:10743
+#: gitk:10765
msgid "(currently unavailable)"
msgstr "(för närvarande inte tillgängligt)"
-#: gitk:10747
+#: gitk:10769
msgid "Colors: press to choose"
msgstr "Färger: tryck för att välja"
-#: gitk:10750
+#: gitk:10772
msgid "Interface"
msgstr "Gränssnitt"
-#: gitk:10751
+#: gitk:10773
msgid "interface"
msgstr "gränssnitt"
-#: gitk:10754
+#: gitk:10776
msgid "Background"
msgstr "Bakgrund"
-#: gitk:10755 gitk:10785
+#: gitk:10777 gitk:10807
msgid "background"
msgstr "bakgrund"
-#: gitk:10758
+#: gitk:10780
msgid "Foreground"
msgstr "Förgrund"
-#: gitk:10759
+#: gitk:10781
msgid "foreground"
msgstr "förgrund"
-#: gitk:10762
+#: gitk:10784
msgid "Diff: old lines"
msgstr "Diff: gamla rader"
-#: gitk:10763
+#: gitk:10785
msgid "diff old lines"
msgstr "diff gamla rader"
-#: gitk:10767
+#: gitk:10789
msgid "Diff: new lines"
msgstr "Diff: nya rader"
-#: gitk:10768
+#: gitk:10790
msgid "diff new lines"
msgstr "diff nya rader"
-#: gitk:10772
+#: gitk:10794
msgid "Diff: hunk header"
msgstr "Diff: delhuvud"
-#: gitk:10774
+#: gitk:10796
msgid "diff hunk header"
msgstr "diff delhuvud"
-#: gitk:10778
+#: gitk:10800
msgid "Marked line bg"
msgstr "Markerad rad bakgrund"
-#: gitk:10780
+#: gitk:10802
msgid "marked line background"
msgstr "markerad rad bakgrund"
-#: gitk:10784
+#: gitk:10806
msgid "Select bg"
msgstr "Markerad bakgrund"
-#: gitk:10788
+#: gitk:10810
msgid "Fonts: press to choose"
msgstr "Teckensnitt: tryck för att välja"
-#: gitk:10790
+#: gitk:10812
msgid "Main font"
msgstr "Huvudteckensnitt"
-#: gitk:10791
+#: gitk:10813
msgid "Diff display font"
msgstr "Teckensnitt för diffvisning"
-#: gitk:10792
+#: gitk:10814
msgid "User interface font"
msgstr "Teckensnitt för användargränssnitt"
-#: gitk:10829
+#: gitk:10842
#, tcl-format
msgid "Gitk: choose color for %s"
msgstr "Gitk: välj färg för %s"
-#: gitk:11433
+#: gitk:11445
msgid "Cannot find a git repository here."
-msgstr "Hittar inget gitk-arkiv här."
+msgstr "Hittar inget git-arkiv här."
-#: gitk:11437
+#: gitk:11449
#, tcl-format
msgid "Cannot find the git directory \"%s\"."
msgstr "Hittar inte git-katalogen \"%s\"."
-#: gitk:11484
+#: gitk:11496
#, tcl-format
msgid "Ambiguous argument '%s': both revision and filename"
msgstr "Tvetydigt argument \"%s\": både revision och filnamn"
-#: gitk:11496
+#: gitk:11508
msgid "Bad arguments to gitk:"
msgstr "Felaktiga argument till gitk:"
-#: gitk:11587
+#: gitk:11604
msgid "Command line"
msgstr "Kommandorad"
* $my_url, $my_uri
Full URL and absolute URL of gitweb script;
in earlier versions of gitweb you might have need to set those
- variables, now there should be no need to do it.
+ variables, now there should be no need to do it. See
+ $per_request_config if you need to set them still.
* $base_url
Base URL for relative URLs in pages generated by gitweb,
(e.g. $logo, $favicon, @stylesheets if they are relative URLs),
needed and used only for URLs with nonempty PATH_INFO via
<base href="$base_url">. Usually gitweb sets its value correctly,
and there is no need to set this variable, e.g. to $my_uri or "/".
+ See $per_request_config if you need to set it anyway.
* $home_link
Target of the home link on top of all pages (the first part of view
"breadcrumbs"). By default set to absolute URI of a page ($my_uri).
http://www.andre-simon.de due to assumptions about parameters and output).
Useful if highlight is not installed on your webserver's PATH.
[Default: highlight]
+ * $per_request_config
+ If set to code reference, it would be run once per each request. You can
+ set parts of configuration that change per session, e.g. by setting it to
+ sub { $ENV{GL_USER} = $cgi->remote_user || "gitweb"; }
+ Otherwise it is treated as boolean value: if true gitweb would process
+ config file once per request, if false it would process config file only
+ once. Note: $my_url, $my_uri, and $base_url are overwritten with
+ their default values before every request, so if you want to change
+ them, be sure to set this variable to true or a code reference effecting
+ the desired changes. The default is true.
Projects list file format
~~~~~~~~~~~~~~~~~~~~~~~~~
!$known_snapshot_formats{$_}{'disabled'}} @fmts;
}
+# If it is set to code reference, it is code that it is to be run once per
+# request, allowing updating configurations that change with each request,
+# while running other code in config file only once.
+#
+# Otherwise, if it is false then gitweb would process config file only once;
+# if it is true then gitweb config would be run for each request.
+our $per_request_config = 1;
+
our ($GITWEB_CONFIG, $GITWEB_CONFIG_SYSTEM);
sub evaluate_gitweb_config {
our $GITWEB_CONFIG = $ENV{'GITWEB_CONFIG'} || "++GITWEB_CONFIG++";
our $number_of_git_cmds = 0;
}
+our $first_request = 1;
sub run_request {
reset_timer();
evaluate_uri();
- evaluate_gitweb_config();
- evaluate_git_version();
+ if ($first_request) {
+ evaluate_gitweb_config();
+ evaluate_git_version();
+ }
+ if ($per_request_config) {
+ if (ref($per_request_config) eq 'CODE') {
+ $per_request_config->();
+ } elsif (!$first_request) {
+ evaluate_gitweb_config();
+ }
+ }
check_loadavg();
# $projectroot and $projects_list might be set in gitweb config file
sub run {
evaluate_argv();
+ $first_request = 1;
$pre_listen_hook->()
if $pre_listen_hook;
$post_dispatch_hook->()
if $post_dispatch_hook;
+ $first_request = 0;
last REQUEST if ($is_last_request->());
}
$href =~ s,/$,,;
# Then add the project name, if present
- $href .= "/".esc_url($params{'project'});
+ $href .= "/".esc_path_info($params{'project'});
delete $params{'project'};
# since we destructively absorb parameters, we keep this
# Summary just uses the project path URL, any other action is
# added to the URL
if (defined $params{'action'}) {
- $href .= "/".esc_url($params{'action'}) unless $params{'action'} eq 'summary';
+ $href .= "/".esc_path_info($params{'action'})
+ unless $params{'action'} eq 'summary';
delete $params{'action'};
}
|| $params{'hash_parent'} || $params{'hash'});
if (defined $params{'hash_base'}) {
if (defined $params{'hash_parent_base'}) {
- $href .= esc_url($params{'hash_parent_base'});
+ $href .= esc_path_info($params{'hash_parent_base'});
# skip the file_parent if it's the same as the file_name
if (defined $params{'file_parent'}) {
if (defined $params{'file_name'} && $params{'file_parent'} eq $params{'file_name'}) {
delete $params{'file_parent'};
} elsif ($params{'file_parent'} !~ /\.\./) {
- $href .= ":/".esc_url($params{'file_parent'});
+ $href .= ":/".esc_path_info($params{'file_parent'});
delete $params{'file_parent'};
}
}
delete $params{'hash_parent'};
delete $params{'hash_parent_base'};
} elsif (defined $params{'hash_parent'}) {
- $href .= esc_url($params{'hash_parent'}). "..";
+ $href .= esc_path_info($params{'hash_parent'}). "..";
delete $params{'hash_parent'};
}
- $href .= esc_url($params{'hash_base'});
+ $href .= esc_path_info($params{'hash_base'});
if (defined $params{'file_name'} && $params{'file_name'} !~ /\.\./) {
- $href .= ":/".esc_url($params{'file_name'});
+ $href .= ":/".esc_path_info($params{'file_name'});
delete $params{'file_name'};
}
delete $params{'hash'};
delete $params{'hash_base'};
} elsif (defined $params{'hash'}) {
- $href .= esc_url($params{'hash'});
+ $href .= esc_path_info($params{'hash'});
delete $params{'hash'};
}
}
$href .= "?" . join(';', @result) if scalar @result;
+ # final transformation: trailing spaces must be escaped (URI-encoded)
+ $href =~ s/(\s+)$/CGI::escape($1)/e;
+
return $href;
}
return $str;
}
+# the quoting rules for path_info fragment are slightly different
+sub esc_path_info {
+ my $str = shift;
+ return undef unless defined $str;
+
+ # path_info doesn't treat '+' as space (specially), but '?' must be escaped
+ $str =~ s/([^A-Za-z0-9\-_.~();\/;:@&= +]+)/CGI::escape($1)/eg;
+
+ return $str;
+}
+
# quote unsafe chars in whole URL, so some characters cannot be quoted
sub esc_url {
my $str = shift;
return $str;
}
+# quote unsafe characters in HTML attributes
+sub esc_attr {
+
+ # for XHTML conformance escaping '"' to '"' is not enough
+ return esc_html(@_);
+}
+
# replace invalid utf8 character with SUBSTITUTION sequence
sub esc_html {
my $str = shift;
hash=>$dest
)}, $name);
- $markers .= " <span class=\"$class\" title=\"$ref\">" .
+ $markers .= " <span class=\"".esc_attr($class)."\" title=\"".esc_attr($ref)."\">" .
$link . "</span>";
}
}
return $pre_white .
"<img width=\"$size\" " .
"class=\"avatar\" " .
- "src=\"$url\" " .
+ "src=\"".esc_url($url)."\" " .
"alt=\"\" " .
"/>" . $post_white;
} else {
} else {
my @tags = sort { $cloud->{$a}->{count} <=> $cloud->{$b}->{count} } keys %$cloud;
return '<p align="center">' . join (', ', map {
- "<a href=\"$home_link?by_tag=$_\">$cloud->{$_}->{topname}</a>"
+ $cgi->a({-href=>"$home_link?by_tag=$_"}, $cloud->{$_}->{topname})
} splice(@tags, 0, $count)) . '</p>';
}
}
return $title;
}
+sub print_feed_meta {
+ if (defined $project) {
+ my %href_params = get_feed_info();
+ if (!exists $href_params{'-title'}) {
+ $href_params{'-title'} = 'log';
+ }
+
+ foreach my $format qw(RSS Atom) {
+ my $type = lc($format);
+ my %link_attr = (
+ '-rel' => 'alternate',
+ '-title' => esc_attr("$project - $href_params{'-title'} - $format feed"),
+ '-type' => "application/$type+xml"
+ );
+
+ $href_params{'action'} = $type;
+ $link_attr{'-href'} = href(%href_params);
+ print "<link ".
+ "rel=\"$link_attr{'-rel'}\" ".
+ "title=\"$link_attr{'-title'}\" ".
+ "href=\"$link_attr{'-href'}\" ".
+ "type=\"$link_attr{'-type'}\" ".
+ "/>\n";
+
+ $href_params{'extra_options'} = '--no-merges';
+ $link_attr{'-href'} = href(%href_params);
+ $link_attr{'-title'} .= ' (no merges)';
+ print "<link ".
+ "rel=\"$link_attr{'-rel'}\" ".
+ "title=\"$link_attr{'-title'}\" ".
+ "href=\"$link_attr{'-href'}\" ".
+ "type=\"$link_attr{'-type'}\" ".
+ "/>\n";
+ }
+
+ } else {
+ printf('<link rel="alternate" title="%s projects list" '.
+ 'href="%s" type="text/plain; charset=utf-8" />'."\n",
+ esc_attr($site_name), href(project=>undef, action=>"project_index"));
+ printf('<link rel="alternate" title="%s projects feeds" '.
+ 'href="%s" type="text/x-opml" />'."\n",
+ esc_attr($site_name), href(project=>undef, action=>"opml"));
+ }
+}
+
sub git_header_html {
my $status = shift || "200 OK";
my $expires = shift;
# print out each stylesheet that exist, providing backwards capability
# for those people who defined $stylesheet in a config file
if (defined $stylesheet) {
- print '<link rel="stylesheet" type="text/css" href="'.$stylesheet.'"/>'."\n";
+ print '<link rel="stylesheet" type="text/css" href="'.esc_url($stylesheet).'"/>'."\n";
} else {
foreach my $stylesheet (@stylesheets) {
next unless $stylesheet;
- print '<link rel="stylesheet" type="text/css" href="'.$stylesheet.'"/>'."\n";
- }
- }
- if (defined $project) {
- my %href_params = get_feed_info();
- if (!exists $href_params{'-title'}) {
- $href_params{'-title'} = 'log';
- }
-
- foreach my $format qw(RSS Atom) {
- my $type = lc($format);
- my %link_attr = (
- '-rel' => 'alternate',
- '-title' => "$project - $href_params{'-title'} - $format feed",
- '-type' => "application/$type+xml"
- );
-
- $href_params{'action'} = $type;
- $link_attr{'-href'} = href(%href_params);
- print "<link ".
- "rel=\"$link_attr{'-rel'}\" ".
- "title=\"$link_attr{'-title'}\" ".
- "href=\"$link_attr{'-href'}\" ".
- "type=\"$link_attr{'-type'}\" ".
- "/>\n";
-
- $href_params{'extra_options'} = '--no-merges';
- $link_attr{'-href'} = href(%href_params);
- $link_attr{'-title'} .= ' (no merges)';
- print "<link ".
- "rel=\"$link_attr{'-rel'}\" ".
- "title=\"$link_attr{'-title'}\" ".
- "href=\"$link_attr{'-href'}\" ".
- "type=\"$link_attr{'-type'}\" ".
- "/>\n";
+ print '<link rel="stylesheet" type="text/css" href="'.esc_url($stylesheet).'"/>'."\n";
}
-
- } else {
- printf('<link rel="alternate" title="%s projects list" '.
- 'href="%s" type="text/plain; charset=utf-8" />'."\n",
- $site_name, href(project=>undef, action=>"project_index"));
- printf('<link rel="alternate" title="%s projects feeds" '.
- 'href="%s" type="text/x-opml" />'."\n",
- $site_name, href(project=>undef, action=>"opml"));
}
+ print_feed_meta()
+ if ($status eq '200 OK');
if (defined $favicon) {
- print qq(<link rel="shortcut icon" href="$favicon" type="image/png" />\n);
+ print qq(<link rel="shortcut icon" href=").esc_url($favicon).qq(" type="image/png" />\n);
}
print "</head>\n" .
print "<div class=\"page_header\">\n" .
$cgi->a({-href => esc_url($logo_url),
-title => $logo_label},
- qq(<img src="$logo" width="72" height="27" alt="git" class="logo"/>));
+ qq(<img src=").esc_url($logo).qq(" width="72" height="27" alt="git" class="logo"/>));
print $cgi->a({-href => esc_url($home_link)}, $home_link_str) . " / ";
if (defined $project) {
print $cgi->a({-href => href(action=>"summary")}, esc_html($project));
insert_file($site_footer);
}
- print qq!<script type="text/javascript" src="$javascript"></script>\n!;
+ print qq!<script type="text/javascript" src="!.esc_url($javascript).qq!"></script>\n!;
if (defined $action &&
$action eq 'blame_incremental') {
print qq!<script type="text/javascript">\n!.
} else {
print "<div class=\"page_nav\">\n" .
"<br/><br/></div>\n" .
- "<div class=\"title\">$hash</div>\n";
+ "<div class=\"title\">".esc_html($hash)."</div>\n";
}
git_print_page_path($file_name, "blob", $hash_base);
print "<div class=\"page_body\">\n";
if ($mimetype =~ m!^image/!) {
- print qq!<img type="$mimetype"!;
+ print qq!<img type="!.esc_attr($mimetype).qq!"!;
if ($file_name) {
- print qq! alt="$file_name" title="$file_name"!;
+ print qq! alt="!.esc_attr($file_name).qq!" title="!.esc_attr($file_name).qq!"!;
}
print qq! src="! .
href(action=>"blob_plain", hash=>$hash,
$nr++;
$line = untabify($line);
printf qq!<div class="pre"><a id="l%i" href="%s#l%i" class="linenr">%4i</a> %s</div>\n!,
- $nr, href(-replay => 1), $nr, $nr, $syntax ? $line : esc_html($line, -nbsp=>1);
+ $nr, esc_attr(href(-replay => 1)), $nr, $nr, $syntax ? $line : esc_html($line, -nbsp=>1);
}
}
close $fd
undef $hash_base;
print "<div class=\"page_nav\">\n";
print "<br/><br/></div>\n";
- print "<div class=\"title\">$hash</div>\n";
+ print "<div class=\"title\">".esc_html($hash)."</div>\n";
}
if (defined $file_name) {
$basedir = $file_name;
git_print_header_div('commit', esc_html($co{'title'}), $hash_base);
} else {
print "<div class=\"page_nav\"><br/>$formats_nav<br/></div>\n";
- print "<div class=\"title\">$hash vs $hash_parent</div>\n";
+ print "<div class=\"title\">".esc_html("$hash vs $hash_parent")."</div>\n";
}
if (defined $file_name) {
git_print_page_path($file_name, "blob", $hash_base);
#include "exec_cmd.h"
#include "levenshtein.h"
#include "help.h"
+#include "common-cmds.h"
/* most GUI terminals set COLUMNS (although some don't export it) */
static int term_columns(void)
}
/* An empirically derived magic number */
-#define SIMILAR_ENOUGH(x) ((x) < 6)
+#define SIMILARITY_FLOOR 7
+#define SIMILAR_ENOUGH(x) ((x) < SIMILARITY_FLOOR)
const char *help_unknown_cmd(const char *cmd)
{
sizeof(main_cmds.names), cmdname_compare);
uniq(&main_cmds);
- /* This reuses cmdname->len for similarity index */
- for (i = 0; i < main_cmds.cnt; ++i)
+ /* This abuses cmdname->len for levenshtein distance */
+ for (i = 0, n = 0; i < main_cmds.cnt; i++) {
+ int cmp = 0; /* avoid compiler stupidity */
+ const char *candidate = main_cmds.names[i]->name;
+
+ /* Does the candidate appear in common_cmds list? */
+ while (n < ARRAY_SIZE(common_cmds) &&
+ (cmp = strcmp(common_cmds[n].name, candidate)) < 0)
+ n++;
+ if ((n < ARRAY_SIZE(common_cmds)) && !cmp) {
+ /* Yes, this is one of the common commands */
+ n++; /* use the entry from common_cmds[] */
+ if (!prefixcmp(candidate, cmd)) {
+ /* Give prefix match a very good score */
+ main_cmds.names[i]->len = 0;
+ continue;
+ }
+ }
+
main_cmds.names[i]->len =
- levenshtein(cmd, main_cmds.names[i]->name, 0, 2, 1, 4);
+ levenshtein(cmd, candidate, 0, 2, 1, 4) + 1;
+ }
qsort(main_cmds.names, main_cmds.cnt,
sizeof(*main_cmds.names), levenshtein_compare);
if (!main_cmds.cnt)
die ("Uh oh. Your system reports no Git commands at all.");
- best_similarity = main_cmds.names[0]->len;
- n = 1;
- while (n < main_cmds.cnt && best_similarity == main_cmds.names[n]->len)
- ++n;
+ /* skip and count prefix matches */
+ for (n = 0; n < main_cmds.cnt && !main_cmds.names[n]->len; n++)
+ ; /* still counting */
+
+ if (main_cmds.cnt <= n) {
+ /* prefix matches with everything? that is too ambiguous */
+ best_similarity = SIMILARITY_FLOOR + 1;
+ } else {
+ /* count all the most similar ones */
+ for (best_similarity = main_cmds.names[n++]->len;
+ (n < main_cmds.cnt &&
+ best_similarity == main_cmds.names[n]->len);
+ n++)
+ ; /* still counting */
+ }
if (autocorrect && n == 1 && SIMILAR_ENOUGH(best_similarity)) {
const char *assumed = main_cmds.names[0]->name;
main_cmds.names[0] = NULL;
die("GIT_PROJECT_ROOT is set but PATH_INFO is not");
if (daemon_avoid_alias(pathinfo))
die("'%s': aliased", pathinfo);
- strbuf_addstr(&buf, root);
- if (buf.buf[buf.len - 1] != '/')
- strbuf_addch(&buf, '/');
+ end_url_with_slash(&buf, root);
if (pathinfo[0] == '/')
pathinfo++;
strbuf_addstr(&buf, pathinfo);
int commits;
const char **write_ref = NULL;
char **commit_id;
- const char *url;
- char *rewritten_url = NULL;
+ char *url = NULL;
int arg = 1;
int rc = 0;
int get_tree = 0;
commit_id = (char **) &argv[arg++];
commits = 1;
}
- url = argv[arg];
+
+ if (argv[arg])
+ str_end_url_with_slash(argv[arg], &url);
prefix = setup_git_directory();
git_config(git_default_config, NULL);
- if (url && url[strlen(url)-1] != '/') {
- rewritten_url = xmalloc(strlen(url)+2);
- strcpy(rewritten_url, url);
- strcat(rewritten_url, "/");
- url = rewritten_url;
- }
-
http_init(NULL);
walker = get_http_walker(url);
walker->get_tree = get_tree;
walker_free(walker);
http_cleanup();
- free(rewritten_url);
+ free(url);
return rc;
}
if (tag_closed) {
if (!strcmp(ctx->name, DAV_PROPFIND_RESP) && ls->dentry_name) {
if (ls->dentry_flags & IS_DIR) {
+
+ /* ensure collection names end with slash */
+ str_end_url_with_slash(ls->dentry_name, &ls->dentry_name);
+
if (ls->flags & PROCESS_DIRS) {
ls->userFunc(ls);
}
}
}
if (path) {
- path += repo->path_len;
- ls->dentry_name = xstrdup(path);
+ const char *url = repo->url;
+ if (repo->path)
+ url = repo->path;
+ if (strncmp(path, url, repo->path_len))
+ error("Parsed path '%s' does not match url: '%s'\n",
+ path, url);
+ else {
+ path += repo->path_len;
+ ls->dentry_name = xstrdup(path);
+ }
}
} else if (!strcmp(ctx->name, DAV_PROPFIND_COLLECTION)) {
ls->dentry_flags |= IS_DIR;
int new_refs;
struct ref *ref, *local_refs;
struct remote *remote;
- char *rewritten_url = NULL;
git_extract_argv0_path(argv[0]);
}
if (!repo->url) {
char *path = strstr(arg, "//");
- repo->url = arg;
- repo->path_len = strlen(arg);
+ str_end_url_with_slash(arg, &repo->url);
+ repo->path_len = strlen(repo->url);
if (path) {
repo->path = strchr(path+2, '/');
if (repo->path)
remote->url[remote->url_nr++] = repo->url;
http_init(remote);
- if (repo->url && repo->url[strlen(repo->url)-1] != '/') {
- rewritten_url = xmalloc(strlen(repo->url)+2);
- strcpy(rewritten_url, repo->url);
- strcat(rewritten_url, "/");
- repo->path = rewritten_url + (repo->path - repo->url);
- repo->path_len++;
- repo->url = rewritten_url;
- }
-
#ifdef USE_CURL_MULTI
is_running_queue = 0;
#endif
}
cleanup:
- free(rewritten_url);
if (info_ref_lock)
unlock_remote(info_ref_lock);
free(repo);
return 'A' + v - 10;
}
-void end_url_with_slash(struct strbuf *buf, const char *url)
-{
- strbuf_addstr(buf, url);
- if (buf->len && buf->buf[buf->len - 1] != '/')
- strbuf_addstr(buf, "/");
-}
-
static char *quote_ref_url(const char *base, const char *ref)
{
struct strbuf buf = STRBUF_INIT;
#include "strbuf.h"
#include "remote.h"
+#include "url.h"
/*
* We detect based on the cURL version if multi-transfer is
int only_two_digit_prefix);
extern char *get_remote_object_url(const char *url, const char *hex,
int only_two_digit_prefix);
-extern void end_url_with_slash(struct strbuf *buf, const char *url);
/* Options for http_request_*() */
#define HTTP_NO_CACHE 1
#define OPT_SHORT 1
#define OPT_UNSET 2
+static int optbug(const struct option *opt, const char *reason)
+{
+ if (opt->long_name)
+ return error("BUG: option '%s' %s", opt->long_name, reason);
+ return error("BUG: switch '%c' %s", opt->short_name, reason);
+}
+
static int opterror(const struct option *opt, const char *reason, int flags)
{
if (flags & OPT_SHORT)
return opterror(opt, "takes no value", flags);
if (unset && (opt->flags & PARSE_OPT_NONEG))
return opterror(opt, "isn't available", flags);
-
- if (!(flags & OPT_SHORT) && p->opt) {
- switch (opt->type) {
- case OPTION_CALLBACK:
- if (!(opt->flags & PARSE_OPT_NOARG))
- break;
- /* FALLTHROUGH */
- case OPTION_BOOLEAN:
- case OPTION_BIT:
- case OPTION_NEGBIT:
- case OPTION_SET_INT:
- case OPTION_SET_PTR:
- return opterror(opt, "takes no value", flags);
- default:
- break;
- }
- }
+ if (!(flags & OPT_SHORT) && p->opt && (opt->flags & PARSE_OPT_NOARG))
+ return opterror(opt, "takes no value", flags);
switch (opt->type) {
+ case OPTION_LOWLEVEL_CALLBACK:
+ return (*(parse_opt_ll_cb *)opt->callback)(p, opt, unset);
+
case OPTION_BIT:
if (unset)
*(int *)opt->value &= ~opt->defval;
for (; options->type != OPTION_END; options++) {
if (!(options->flags & PARSE_OPT_NODASH))
continue;
- if ((options->flags & PARSE_OPT_OPTARG) ||
- !(options->flags & PARSE_OPT_NOARG))
- die("BUG: dashless options don't support arguments");
- if (!(options->flags & PARSE_OPT_NONEG))
- die("BUG: dashless options don't support negation");
- if (options->long_name)
- die("BUG: dashless options can't be long");
if (options->short_name == arg[0] && arg[1] == '\0')
return get_value(p, options, OPT_SHORT);
}
for (; opts->type != OPTION_END; opts++) {
if ((opts->flags & PARSE_OPT_LASTARG_DEFAULT) &&
- (opts->flags & PARSE_OPT_OPTARG)) {
- if (opts->long_name) {
- error("`--%s` uses incompatible flags "
- "LASTARG_DEFAULT and OPTARG", opts->long_name);
- } else {
- error("`-%c` uses incompatible flags "
- "LASTARG_DEFAULT and OPTARG", opts->short_name);
- }
- err |= 1;
+ (opts->flags & PARSE_OPT_OPTARG))
+ err |= optbug(opts, "uses incompatible flags "
+ "LASTARG_DEFAULT and OPTARG");
+ if (opts->flags & PARSE_OPT_NODASH &&
+ ((opts->flags & PARSE_OPT_OPTARG) ||
+ !(opts->flags & PARSE_OPT_NOARG) ||
+ !(opts->flags & PARSE_OPT_NONEG) ||
+ opts->long_name))
+ err |= optbug(opts, "uses feature "
+ "not supported for dashless options");
+ switch (opts->type) {
+ case OPTION_BOOLEAN:
+ case OPTION_BIT:
+ case OPTION_NEGBIT:
+ case OPTION_SET_INT:
+ case OPTION_SET_PTR:
+ case OPTION_NUMBER:
+ if ((opts->flags & PARSE_OPT_OPTARG) ||
+ !(opts->flags & PARSE_OPT_NOARG))
+ err |= optbug(opts, "should not accept an argument");
+ default:
+ ; /* ok. (usually accepts an argument) */
}
}
-
if (err)
- exit(129);
+ exit(128);
}
void parse_options_start(struct parse_opt_ctx_t *ctx,
int argc, const char **argv, const char *prefix,
- int flags)
+ const struct option *options, int flags)
{
memset(ctx, 0, sizeof(*ctx));
ctx->argc = argc - 1;
if ((flags & PARSE_OPT_KEEP_UNKNOWN) &&
(flags & PARSE_OPT_STOP_AT_NON_OPTION))
die("STOP_AT_NON_OPTION and KEEP_UNKNOWN don't go together");
+ parse_options_check(options);
}
static int usage_with_options_internal(struct parse_opt_ctx_t *,
{
int internal_help = !(ctx->flags & PARSE_OPT_NO_INTERNAL_HELP);
- parse_options_check(options);
-
/* we must reset ->opt, unknown short option leave it dangling */
ctx->opt = NULL;
if (parse_nodash_opt(ctx, arg, options) == 0)
continue;
if (ctx->flags & PARSE_OPT_STOP_AT_NON_OPTION)
- break;
+ return PARSE_OPT_NON_OPTION;
ctx->out[ctx->cpidx++] = ctx->argv[0];
continue;
}
{
struct parse_opt_ctx_t ctx;
- parse_options_start(&ctx, argc, argv, prefix, flags);
+ parse_options_start(&ctx, argc, argv, prefix, options, flags);
switch (parse_options_step(&ctx, options, usagestr)) {
case PARSE_OPT_HELP:
exit(129);
+ case PARSE_OPT_NON_OPTION:
case PARSE_OPT_DONE:
break;
default: /* PARSE_OPT_UNKNOWN */
if (opts->type == OPTION_NUMBER)
pos += fprintf(outfile, "-NUM");
- if (!(opts->flags & PARSE_OPT_NOARG))
+ if ((opts->flags & PARSE_OPT_LITERAL_ARGHELP) ||
+ !(opts->flags & PARSE_OPT_NOARG))
pos += usage_argh(opts, outfile);
if (pos <= USAGE_OPTS_WIDTH)
OPTION_STRING,
OPTION_INTEGER,
OPTION_CALLBACK,
+ OPTION_LOWLEVEL_CALLBACK,
OPTION_FILENAME
};
struct option;
typedef int parse_opt_cb(const struct option *, const char *arg, int unset);
+struct parse_opt_ctx_t;
+typedef int parse_opt_ll_cb(struct parse_opt_ctx_t *ctx,
+ const struct option *opt, int unset);
+
/*
* `type`::
* holds the type of the option, you must have an OPTION_END last in your
* useful for users of OPTION_NEGBIT.
*
* `callback`::
- * pointer to the callback to use for OPTION_CALLBACK.
+ * pointer to the callback to use for OPTION_CALLBACK or
+ * OPTION_LOWLEVEL_CALLBACK.
*
* `defval`::
* default value to fill (*->value) with for PARSE_OPT_OPTARG.
enum {
PARSE_OPT_HELP = -1,
PARSE_OPT_DONE,
+ PARSE_OPT_NON_OPTION,
PARSE_OPT_UNKNOWN
};
extern void parse_options_start(struct parse_opt_ctx_t *ctx,
int argc, const char **argv, const char *prefix,
- int flags);
+ const struct option *options, int flags);
extern int parse_options_step(struct parse_opt_ctx_t *ctx,
const struct option *options,
commit->parents = xcalloc(sizeof(struct commit_list), 1);
commit->parents->item = commit_info->commit;
- commit->object.flags &= ~(ADDED | SEEN | SHOWN);
}
void get_reflog_selector(struct strbuf *sb,
revs->commits = entry->next;
free(entry);
- if (revs->reflog_info)
+ if (revs->reflog_info) {
fake_reflog_parent(revs->reflog_info, commit);
+ commit->object.flags &= ~(ADDED | SEEN | SHOWN);
+ }
/*
* If we haven't done the list limiting, we need to look at
static int inside_git_dir = -1;
static int inside_work_tree = -1;
-const char *prefix_path(const char *prefix, int len, const char *path)
+char *prefix_path(const char *prefix, int len, const char *path)
{
const char *orig = path;
char *sanitized = xmalloc(len + strlen(path) + 1);
const char *prefix;
prefix = setup_git_directory_gently_1(nongit_ok);
- if (startup_info)
+ if (startup_info) {
startup_info->have_repository = !nongit_ok || !*nongit_ok;
+ startup_info->prefix = prefix;
+ }
return prefix;
}
return ret;
}
+static char *resolve_relative_path(const char *rel)
+{
+ if (prefixcmp(rel, "./") && prefixcmp(rel, "../"))
+ return NULL;
+
+ if (!startup_info)
+ die("BUG: startup_info struct is not initialized.");
+
+ if (!is_inside_work_tree())
+ die("relative path syntax can't be used outside working tree.");
+
+ /* die() inside prefix_path() if resolved path is outside worktree */
+ return prefix_path(startup_info->prefix,
+ startup_info->prefix ? strlen(startup_info->prefix) : 0,
+ rel);
+}
+
int get_sha1_with_context_1(const char *name, unsigned char *sha1,
struct object_context *oc,
int gently, const char *prefix)
if (!ret)
return ret;
/* sha1:path --> object name of path in ent sha1
- * :path -> object name of path in index
+ * :path -> object name of absolute path in index
+ * :./path -> object name of path relative to cwd in index
* :[0-3]:path -> object name of path in index at stage
* :/foo -> recent commit matching foo
*/
if (name[0] == ':') {
int stage = 0;
struct cache_entry *ce;
+ char *new_path = NULL;
int pos;
if (namelen > 2 && name[1] == '/') {
struct commit_list *list = NULL;
stage = name[1] - '0';
cp = name + 3;
}
- namelen = namelen - (cp - name);
+ new_path = resolve_relative_path(cp);
+ if (!new_path) {
+ namelen = namelen - (cp - name);
+ } else {
+ cp = new_path;
+ namelen = strlen(cp);
+ }
strncpy(oc->path, cp,
sizeof(oc->path));
if (ce_stage(ce) == stage) {
hashcpy(sha1, ce->sha1);
oc->mode = ce->ce_mode;
+ free(new_path);
return 0;
}
pos++;
}
if (!gently)
diagnose_invalid_index_path(stage, prefix, cp);
+ free(new_path);
return -1;
}
for (cp = name, bracket_depth = 0; *cp; cp++) {
}
if (!get_sha1_1(name, cp-name, tree_sha1)) {
const char *filename = cp+1;
+ char *new_filename = NULL;
+
+ new_filename = resolve_relative_path(filename);
+ if (new_filename)
+ filename = new_filename;
ret = get_tree_entry(tree_sha1, filename, sha1, &oc->mode);
if (!gently) {
diagnose_invalid_sha1_path(prefix, filename,
sizeof(oc->path));
oc->path[sizeof(oc->path)-1] = '\0';
+ free(new_filename);
return ret;
} else {
if (!gently)
#include "string-list.h"
struct string_list config_name_for_path;
+struct string_list config_fetch_recurse_submodules_for_name;
struct string_list config_ignore_for_name;
+static int config_fetch_recurse_submodules;
static int add_submodule_odb(const char *path)
{
}
}
-static int submodule_config(const char *var, const char *value, void *cb)
+int submodule_config(const char *var, const char *value, void *cb)
{
if (!prefixcmp(var, "submodule."))
return parse_submodule_config_option(var, value);
+ else if (!strcmp(var, "fetch.recursesubmodules")) {
+ config_fetch_recurse_submodules = git_config_bool(var, value);
+ return 0;
+ }
return 0;
}
config = string_list_append(&config_name_for_path, xstrdup(value));
config->util = strbuf_detach(&submodname, NULL);
strbuf_release(&submodname);
+ } else if ((len > 23) && !strcmp(var + len - 23, ".fetchrecursesubmodules")) {
+ strbuf_add(&submodname, var, len - 23);
+ config = unsorted_string_list_lookup(&config_fetch_recurse_submodules_for_name, submodname.buf);
+ if (!config)
+ config = string_list_append(&config_fetch_recurse_submodules_for_name,
+ strbuf_detach(&submodname, NULL));
+ config->util = git_config_bool(var, value) ? (void *)1 : NULL;
+ strbuf_release(&submodname);
} else if ((len > 7) && !strcmp(var + len - 7, ".ignore")) {
if (strcmp(value, "untracked") && strcmp(value, "dirty") &&
strcmp(value, "all") && strcmp(value, "none")) {
strbuf_release(&sb);
}
+void set_config_fetch_recurse_submodules(int value)
+{
+ config_fetch_recurse_submodules = value;
+}
+
+int fetch_populated_submodules(int num_options, const char **options,
+ const char *prefix, int ignore_config,
+ int quiet)
+{
+ int i, result = 0, argc = 0;
+ struct child_process cp;
+ const char **argv;
+ struct string_list_item *name_for_path;
+ const char *work_tree = get_git_work_tree();
+ if (!work_tree)
+ return 0;
+
+ if (!the_index.initialized)
+ if (read_cache() < 0)
+ die("index file corrupt");
+
+ /* 4: "fetch" (options) "--submodule-prefix" prefix NULL */
+ argv = xcalloc(num_options + 4, sizeof(const char *));
+ argv[argc++] = "fetch";
+ for (i = 0; i < num_options; i++)
+ argv[argc++] = options[i];
+ argv[argc++] = "--submodule-prefix";
+
+ memset(&cp, 0, sizeof(cp));
+ cp.argv = argv;
+ cp.env = local_repo_env;
+ cp.git_cmd = 1;
+ cp.no_stdin = 1;
+
+ for (i = 0; i < active_nr; i++) {
+ struct strbuf submodule_path = STRBUF_INIT;
+ struct strbuf submodule_git_dir = STRBUF_INIT;
+ struct strbuf submodule_prefix = STRBUF_INIT;
+ struct cache_entry *ce = active_cache[i];
+ const char *git_dir, *name;
+
+ if (!S_ISGITLINK(ce->ce_mode))
+ continue;
+
+ name = ce->name;
+ name_for_path = unsorted_string_list_lookup(&config_name_for_path, ce->name);
+ if (name_for_path)
+ name = name_for_path->util;
+
+ if (!ignore_config) {
+ struct string_list_item *fetch_recurse_submodules_option;
+ fetch_recurse_submodules_option = unsorted_string_list_lookup(&config_fetch_recurse_submodules_for_name, name);
+ if (fetch_recurse_submodules_option) {
+ if (!fetch_recurse_submodules_option->util)
+ continue;
+ } else {
+ if (!config_fetch_recurse_submodules)
+ continue;
+ }
+ }
+
+ strbuf_addf(&submodule_path, "%s/%s", work_tree, ce->name);
+ strbuf_addf(&submodule_git_dir, "%s/.git", submodule_path.buf);
+ strbuf_addf(&submodule_prefix, "%s%s/", prefix, ce->name);
+ git_dir = read_gitfile_gently(submodule_git_dir.buf);
+ if (!git_dir)
+ git_dir = submodule_git_dir.buf;
+ if (is_directory(git_dir)) {
+ if (!quiet)
+ printf("Fetching submodule %s%s\n", prefix, ce->name);
+ cp.dir = submodule_path.buf;
+ argv[argc] = submodule_prefix.buf;
+ if (run_command(&cp))
+ result = 1;
+ }
+ strbuf_release(&submodule_path);
+ strbuf_release(&submodule_git_dir);
+ strbuf_release(&submodule_prefix);
+ }
+ free(argv);
+ return result;
+}
+
unsigned is_submodule_modified(const char *path, int ignore_untracked)
{
ssize_t len;
void set_diffopt_flags_from_submodule_config(struct diff_options *diffopt,
const char *path);
+int submodule_config(const char *var, const char *value, void *cb);
void gitmodules_config();
int parse_submodule_config_option(const char *var, const char *value);
void handle_ignore_submodules_arg(struct diff_options *diffopt, const char *);
unsigned char one[20], unsigned char two[20],
unsigned dirty_submodule,
const char *del, const char *add, const char *reset);
+void set_config_fetch_recurse_submodules(int value);
+int fetch_populated_submodules(int num_options, const char **options,
+ const char *prefix, int ignore_config,
+ int quiet);
unsigned is_submodule_modified(const char *path, int ignore_untracked);
int merge_submodule(unsigned char result[20], const char *path, const unsigned char base[20],
const unsigned char a[20], const unsigned char b[20]);
all: $(DEFAULT_TEST_TARGET)
-test: pre-clean
+test: pre-clean $(TEST_LINT)
$(MAKE) aggregate-results-and-cleanup
-prove: pre-clean
+prove: pre-clean $(TEST_LINT)
@echo "*** prove ***"; GIT_CONFIG=.git/config $(PROVE) --exec '$(SHELL_PATH_SQ)' $(GIT_PROVE_OPTS) $(T) :: $(GIT_TEST_OPTS)
$(MAKE) clean
$(RM) -r valgrind/bin
$(RM) .prove
+test-lint: test-lint-duplicates test-lint-executable
+
+test-lint-duplicates:
+ @dups=`echo $(T) | tr ' ' '\n' | sed 's/-.*//' | sort | uniq -d` && \
+ test -z "$$dups" || { \
+ echo >&2 "duplicate test numbers:" $$dups; exit 1; }
+
+test-lint-executable:
+ @bad=`for i in $(T); do test -x "$$i" || echo $$i; done` && \
+ test -z "$$bad" || { \
+ echo >&2 "non-executable tests:" $$bad; exit 1; }
+
aggregate-results-and-cleanup: $(T)
$(MAKE) aggregate-results
$(MAKE) clean
--- /dev/null
+#!/bin/sh
+
+test_description='reflog walk shows repeated commits again'
+. ./test-lib.sh
+
+test_expect_success 'setup commits' '
+ test_tick &&
+ echo content >file && git add file && git commit -m one &&
+ git tag one &&
+ echo content >>file && git add file && git commit -m two &&
+ git tag two
+'
+
+test_expect_success 'setup reflog with alternating commits' '
+ git checkout -b topic &&
+ git reset one &&
+ git reset two &&
+ git reset one &&
+ git reset two
+'
+
+test_expect_success 'reflog shows all entries' '
+ cat >expect <<-\EOF
+ topic@{0} two: updating HEAD
+ topic@{1} one: updating HEAD
+ topic@{2} two: updating HEAD
+ topic@{3} one: updating HEAD
+ topic@{4} branch: Created from HEAD
+ EOF
+ git log -g --format="%gd %gs" topic >actual &&
+ test_cmp expect actual
+'
+
+test_done
test $HASH_file = $(git rev-parse :0:file.txt) )
'
+test_expect_success 'correct relative file objects (0)' '
+ git rev-parse :file.txt >expected &&
+ git rev-parse :./file.txt >result &&
+ test_cmp expected result &&
+ git rev-parse :0:./file.txt >result &&
+ test_cmp expected result
+'
+
+test_expect_success 'correct relative file objects (1)' '
+ git rev-parse HEAD:file.txt >expected &&
+ git rev-parse HEAD:./file.txt >result &&
+ test_cmp expected result
+'
+
+test_expect_success 'correct relative file objects (2)' '
+ (
+ cd subdir &&
+ git rev-parse HEAD:../file.txt >result &&
+ test_cmp ../expected result
+ )
+'
+
+test_expect_success 'correct relative file objects (3)' '
+ (
+ cd subdir &&
+ git rev-parse HEAD:../subdir/../file.txt >result &&
+ test_cmp ../expected result
+ )
+'
+
+test_expect_success 'correct relative file objects (4)' '
+ git rev-parse HEAD:subdir/file.txt >expected &&
+ (
+ cd subdir &&
+ git rev-parse HEAD:./file.txt >result &&
+ test_cmp ../expected result
+ )
+'
+
+test_expect_success 'correct relative file objects (5)' '
+ git rev-parse :subdir/file.txt >expected &&
+ (
+ cd subdir &&
+ git rev-parse :./file.txt >result &&
+ test_cmp ../expected result &&
+ git rev-parse :0:./file.txt >result &&
+ test_cmp ../expected result
+ )
+'
+
+test_expect_success 'correct relative file objects (6)' '
+ git rev-parse :file.txt >expected &&
+ (
+ cd subdir &&
+ git rev-parse :../file.txt >result &&
+ test_cmp ../expected result &&
+ git rev-parse :0:../file.txt >result &&
+ test_cmp ../expected result
+ )
+'
+
test_expect_success 'incorrect revision id' '
test_must_fail git rev-parse foobar:file.txt 2>error &&
grep "Invalid object name '"'"'foobar'"'"'." error &&
grep "fatal: Log for [^ ]* only has [0-9][0-9]* entries." error
'
+test_expect_success 'relative path not found' '
+ (
+ cd subdir &&
+ test_must_fail git rev-parse HEAD:./nonexistent.txt 2>error &&
+ grep subdir/nonexistent.txt error
+ )
+'
+
+test_expect_success 'relative path outside worktree' '
+ test_must_fail git rev-parse HEAD:../file.txt >output 2>error &&
+ test -z "$(cat output)" &&
+ grep "outside repository" error
+'
+
+test_expect_success 'relative path when cwd is outside worktree' '
+ test_must_fail git --git-dir=.git --work-tree=subdir rev-parse HEAD:./file.txt >output 2>error &&
+ test -z "$(cat output)" &&
+ grep "relative path syntax can.t be used outside working tree." error
+'
+
+test_expect_success 'relative path when startup_info is NULL' '
+ test_must_fail test-match-trees HEAD:./file.txt HEAD:./file.txt 2>error &&
+ grep "BUG: startup_info struct is not initialized." error
+'
+
test_done
--- /dev/null
+#!/bin/sh
+
+test_description='basic checkout-index tests
+'
+
+. ./test-lib.sh
+
+test_expect_success 'checkout-index --gobbledegook' '
+ test_expect_code 129 git checkout-index --gobbledegook 2>err &&
+ grep "[Uu]sage" err
+'
+
+test_expect_success 'checkout-index -h in broken repository' '
+ mkdir broken &&
+ (
+ cd broken &&
+ git init &&
+ >.git/index &&
+ test_expect_code 129 git checkout-index -h >usage 2>&1
+ ) &&
+ grep "[Uu]sage" broken/usage
+'
+
+test_done
--- /dev/null
+#!/bin/sh
+
+test_description='basic update-index tests
+
+Tests for command-line parsing and basic operation.
+'
+
+. ./test-lib.sh
+
+test_expect_success 'update-index --nonsense fails' '
+ test_must_fail git update-index --nonsense 2>msg &&
+ cat msg &&
+ test -s msg
+'
+
+test_expect_failure 'update-index --nonsense dumps usage' '
+ test_expect_code 129 git update-index --nonsense 2>err &&
+ grep "[Uu]sage: git update-index" err
+'
+
+test_expect_success 'update-index -h with corrupt index' '
+ mkdir broken &&
+ (
+ cd broken &&
+ git init &&
+ >.git/index &&
+ test_expect_code 129 git update-index -h >usage 2>&1
+ ) &&
+ grep "[Uu]sage: git update-index" broken/usage
+'
+
+test_done
--- /dev/null
+#!/bin/sh
+
+test_description='basic ls-files tests
+
+This test runs git ls-files with various unusual or malformed
+command-line arguments.
+'
+
+. ./test-lib.sh
+
+>empty
+
+test_expect_success 'ls-files in empty repository' '
+ git ls-files >actual &&
+ test_cmp empty actual
+'
+
+test_expect_success 'ls-files with nonexistent path' '
+ git ls-files doesnotexist >actual &&
+ test_cmp empty actual
+'
+
+test_expect_success 'ls-files with nonsense option' '
+ test_expect_code 129 git ls-files --nonsense 2>actual &&
+ grep "[Uu]sage: git ls-files" actual
+'
+
+test_expect_success 'ls-files -h in corrupt repository' '
+ mkdir broken &&
+ (
+ cd broken &&
+ git init &&
+ >.git/index &&
+ test_expect_code 129 git ls-files -h >usage 2>&1
+ ) &&
+ grep "[Uu]sage: git ls-files " broken/usage
+'
+
+test_done
! test -f .git/refs/heads/--help
'
+test_expect_success 'branch -h in broken repository' '
+ mkdir broken &&
+ (
+ cd broken &&
+ git init &&
+ >.git/refs/heads/master &&
+ test_expect_code 129 git branch -h >usage 2>&1
+ ) &&
+ grep "[Uu]sage" broken/usage
+'
+
test_expect_success \
'git branch abc should create a branch' \
'git branch abc && test -f .git/refs/heads/abc'
test $(git rev-parse to-rebase) = $(git rev-parse pre-rebase) &&
test ! -d "$dotest"
'
+
+ test_expect_success "rebase$type --abort does not update reflog" '
+ cd "$work_dir" &&
+ # Clean up the state from the previous one
+ git reset --hard pre-rebase &&
+ git reflog show to-rebase > reflog_before &&
+ test_must_fail git rebase$type master &&
+ git rebase --abort &&
+ git reflog show to-rebase > reflog_after &&
+ test_cmp reflog_before reflog_after &&
+ rm reflog_before reflog_after
+ '
}
testrebase "" .git/rebase-apply
test_description='various format-patch tests'
. ./test-lib.sh
+. "$TEST_DIRECTORY"/lib-terminal.sh
test_expect_success setup '
! grep "^-- \$" output
'
+test_expect_success TTY 'format-patch --stdout paginates' '
+ rm -f pager_used &&
+ (
+ GIT_PAGER="wc >pager_used" &&
+ export GIT_PAGER &&
+ test_terminal git format-patch --stdout --all
+ ) &&
+ test_path_is_file pager_used
+'
+
+ test_expect_success TTY 'format-patch --stdout pagination can be disabled' '
+ rm -f pager_used &&
+ (
+ GIT_PAGER="wc >pager_used" &&
+ export GIT_PAGER &&
+ test_terminal git --no-pager format-patch --stdout --all &&
+ test_terminal git -c "pager.format-patch=false" format-patch --stdout --all
+ ) &&
+ test_path_is_missing pager_used &&
+ test_path_is_missing .git/pager_used
+'
+
test_done
'
+test_expect_success 'ditto, but tabwidth=9' '
+
+ git config core.whitespace "indent-with-non-tab,tabwidth=9" &&
+ git diff --check
+
+'
+
test_expect_success 'check tabs and spaces as indentation (indent-with-non-tab: on)' '
git config core.whitespace "indent-with-non-tab" &&
'
+test_expect_success 'ditto, but tabwidth=10' '
+
+ git config core.whitespace "indent-with-non-tab,tabwidth=10" &&
+ test_must_fail git diff --check
+
+'
+
+test_expect_success 'ditto, but tabwidth=20' '
+
+ git config core.whitespace "indent-with-non-tab,tabwidth=20" &&
+ git diff --check
+
+'
+
test_expect_success 'check tabs as indentation (tab-in-indent: off)' '
git config core.whitespace "-tab-in-indent" &&
'
+test_expect_success 'ditto, but tabwidth=1 (must be irrelevant)' '
+
+ git config core.whitespace "tab-in-indent,tabwidth=1" &&
+ test_must_fail git diff --check
+
+'
+
test_expect_success 'check tab-in-indent and indent-with-non-tab conflict' '
git config core.whitespace "tab-in-indent,indent-with-non-tab" &&
'
+test_expect_success 'default (attribute)' '
+
+ test_might_fail git config --unset core.whitespace &&
+ echo "F whitespace" >.gitattributes &&
+ prepare_output &&
+
+ grep Eight error >/dev/null &&
+ grep HT error >/dev/null &&
+ grep With error >/dev/null &&
+ grep Return error >/dev/null &&
+ grep No normal >/dev/null
+
+'
+
+test_expect_success 'default, tabwidth=10 (attribute)' '
+
+ git config core.whitespace "tabwidth=10" &&
+ echo "F whitespace" >.gitattributes &&
+ prepare_output &&
+
+ grep Eight normal >/dev/null &&
+ grep HT error >/dev/null &&
+ grep With error >/dev/null &&
+ grep Return error >/dev/null &&
+ grep No normal >/dev/null
+
+'
+
+test_expect_success 'no check (attribute)' '
+
+ test_might_fail git config --unset core.whitespace &&
+ echo "F -whitespace" >.gitattributes &&
+ prepare_output &&
+
+ grep Eight normal >/dev/null &&
+ grep HT normal >/dev/null &&
+ grep With normal >/dev/null &&
+ grep Return normal >/dev/null &&
+ grep No normal >/dev/null
+
+'
+
+test_expect_success 'no check, tabwidth=10 (attribute), must be irrelevant' '
+
+ git config core.whitespace "tabwidth=10" &&
+ echo "F -whitespace" >.gitattributes &&
+ prepare_output &&
+
+ grep Eight normal >/dev/null &&
+ grep HT normal >/dev/null &&
+ grep With normal >/dev/null &&
+ grep Return normal >/dev/null &&
+ grep No normal >/dev/null
+
+'
+
test_expect_success 'without -trail' '
+ rm -f .gitattributes &&
git config core.whitespace -trail &&
prepare_output &&
'
+test_expect_success 'with indent-non-tab only, tabwidth=10' '
+
+ rm -f .gitattributes &&
+ git config core.whitespace indent,tabwidth=10,-trailing,-space &&
+ prepare_output &&
+
+ grep Eight normal >/dev/null &&
+ grep HT normal >/dev/null &&
+ grep With normal >/dev/null &&
+ grep Return normal >/dev/null &&
+ grep No normal >/dev/null
+
+'
+
+test_expect_success 'with indent-non-tab only, tabwidth=10 (attribute)' '
+
+ test_might_fail git config --unset core.whitespace &&
+ echo "F whitespace=indent,-trailing,-space,tabwidth=10" >.gitattributes &&
+ prepare_output &&
+
+ grep Eight normal >/dev/null &&
+ grep HT normal >/dev/null &&
+ grep With normal >/dev/null &&
+ grep Return normal >/dev/null &&
+ grep No normal >/dev/null
+
+'
+
test_expect_success 'with cr-at-eol' '
rm -f .gitattributes &&
# X RULE
# ! trailing-space
# @ space-before-tab
- # # indent-with-non-tab
+ # # indent-with-non-tab (default tab width 8)
+ # = indent-with-non-tab,tabwidth=16
# % tab-in-indent
sed -e "s/_/ /g" -e "s/>/ /" <<-\EOF
An_SP in an ordinary line>and a HT.
________>_Eight SP, a HT and a SP (@#%).
_______________Fifteen SP (#).
_______________>Fifteen SP and a HT (@#%).
- ________________Sixteen SP (#).
- ________________>Sixteen SP and a HT (@#%).
+ ________________Sixteen SP (#=).
+ ________________>Sixteen SP and a HT (@#%=).
_____a__Five SP, a non WS, two SP.
A line with a (!) trailing SP_
A line with a (!) trailing HT>
'
+test_expect_success 'spaces inserted by tab-in-indent' '
+
+ git config core.whitespace -trailing,-space,-indent,tab &&
+ rm -f .gitattributes &&
+ test_fix % &&
+ sed -e "s/_/ /g" -e "s/>/ /" <<-\EOF >expect &&
+ An_SP in an ordinary line>and a HT.
+ ________A HT (%).
+ ________A SP and a HT (@%).
+ _________A SP, a HT and a SP (@%).
+ _______Seven SP.
+ ________Eight SP (#).
+ ________Seven SP and a HT (@%).
+ ________________Eight SP and a HT (@#%).
+ _________Seven SP, a HT and a SP (@%).
+ _________________Eight SP, a HT and a SP (@#%).
+ _______________Fifteen SP (#).
+ ________________Fifteen SP and a HT (@#%).
+ ________________Sixteen SP (#=).
+ ________________________Sixteen SP and a HT (@#%=).
+ _____a__Five SP, a non WS, two SP.
+ A line with a (!) trailing SP_
+ A line with a (!) trailing HT>
+ EOF
+ test_cmp expect target
+
+'
+
for t in - ''
do
case "$t" in '') tt='!' ;; *) tt= ;; esac
case "$s" in '') ts='@' ;; *) ts= ;; esac
for i in - ''
do
- case "$i" in '') ti='#' ;; *) ti= ;; esac
+ case "$i" in '') ti='#' ti16='=';; *) ti= ti16= ;; esac
for h in - ''
do
[ -z "$h$i" ] && continue
test_fix "$tt$ts$ti$th"
'
+ test_expect_success "rule=$rule,tabwidth=16" '
+ git config core.whitespace "$rule,tabwidth=16" &&
+ test_fix "$tt$ts$ti16$th"
+ '
+
test_expect_success "rule=$rule (attributes)" '
git config --unset core.whitespace &&
echo "target whitespace=$rule" >.gitattributes &&
test_fix "$tt$ts$ti$th"
'
+ test_expect_success "rule=$rule,tabwidth=16 (attributes)" '
+ echo "target whitespace=$rule,tabwidth=16" >.gitattributes &&
+ test_fix "$tt$ts$ti16$th"
+ '
+
done
done
done
)
'
+test_expect_success 'git pull --rebase against local branch' '
+ git checkout -b copy2 to-rebase-orig &&
+ git pull --rebase . to-rebase &&
+ test "conflicting modification" = "$(cat file)" &&
+ test file = "$(cat file2)"
+'
+
test_done
--- /dev/null
+#!/bin/sh
+# Copyright (c) 2010, Jens Lehmann
+
+test_description='Recursive "git fetch" for submodules'
+
+. ./test-lib.sh
+
+pwd=$(pwd)
+
+add_upstream_commit() {
+ (
+ cd submodule &&
+ head1=$(git rev-parse --short HEAD) &&
+ echo new >> subfile &&
+ test_tick &&
+ git add subfile &&
+ git commit -m new subfile &&
+ head2=$(git rev-parse --short HEAD) &&
+ echo "From $pwd/submodule" > ../expect.err &&
+ echo " $head1..$head2 master -> origin/master" >> ../expect.err
+ ) &&
+ (
+ cd deepsubmodule &&
+ head1=$(git rev-parse --short HEAD) &&
+ echo new >> deepsubfile &&
+ test_tick &&
+ git add deepsubfile &&
+ git commit -m new deepsubfile &&
+ head2=$(git rev-parse --short HEAD) &&
+ echo "From $pwd/deepsubmodule" >> ../expect.err &&
+ echo " $head1..$head2 master -> origin/master" >> ../expect.err
+ )
+}
+
+test_expect_success setup '
+ mkdir deepsubmodule &&
+ (
+ cd deepsubmodule &&
+ git init &&
+ echo deepsubcontent > deepsubfile &&
+ git add deepsubfile &&
+ git commit -m new deepsubfile
+ ) &&
+ mkdir submodule &&
+ (
+ cd submodule &&
+ git init &&
+ echo subcontent > subfile &&
+ git add subfile &&
+ git submodule add "$pwd/deepsubmodule" deepsubmodule &&
+ git commit -a -m new
+ ) &&
+ git submodule add "$pwd/submodule" submodule &&
+ git commit -am initial &&
+ git clone . downstream &&
+ (
+ cd downstream &&
+ git submodule update --init --recursive
+ ) &&
+ echo "Fetching submodule submodule" > expect.out &&
+ echo "Fetching submodule submodule/deepsubmodule" >> expect.out
+'
+
+test_expect_success "fetch --recurse-submodules recurses into submodules" '
+ add_upstream_commit &&
+ (
+ cd downstream &&
+ git fetch --recurse-submodules >../actual.out 2>../actual.err
+ ) &&
+ test_cmp expect.out actual.out &&
+ test_cmp expect.err actual.err
+'
+
+test_expect_success "fetch alone only fetches superproject" '
+ add_upstream_commit &&
+ (
+ cd downstream &&
+ git fetch >../actual.out 2>../actual.err
+ ) &&
+ ! test -s actual.out &&
+ ! test -s actual.err
+'
+
+test_expect_success "fetch --no-recurse-submodules only fetches superproject" '
+ (
+ cd downstream &&
+ git fetch --no-recurse-submodules >../actual.out 2>../actual.err
+ ) &&
+ ! test -s actual.out &&
+ ! test -s actual.err
+'
+
+test_expect_success "using fetchRecurseSubmodules=true in .gitmodules recurses into submodules" '
+ (
+ cd downstream &&
+ git config -f .gitmodules submodule.submodule.fetchRecurseSubmodules true &&
+ git fetch >../actual.out 2>../actual.err
+ ) &&
+ test_cmp expect.out actual.out &&
+ test_cmp expect.err actual.err
+'
+
+test_expect_success "--no-recurse-submodules overrides .gitmodules config" '
+ add_upstream_commit &&
+ (
+ cd downstream &&
+ git fetch --no-recurse-submodules >../actual.out 2>../actual.err
+ ) &&
+ ! test -s actual.out &&
+ ! test -s actual.err
+'
+
+test_expect_success "using fetchRecurseSubmodules=false in .git/config overrides setting in .gitmodules" '
+ (
+ cd downstream &&
+ git config submodule.submodule.fetchRecurseSubmodules false &&
+ git fetch >../actual.out 2>../actual.err
+ ) &&
+ ! test -s actual.out &&
+ ! test -s actual.err
+'
+
+test_expect_success "--recurse-submodules overrides fetchRecurseSubmodules setting from .git/config" '
+ (
+ cd downstream &&
+ git fetch --recurse-submodules >../actual.out 2>../actual.err &&
+ git config -f --unset .gitmodules submodule.submodule.fetchRecurseSubmodules true &&
+ git config --unset submodule.submodule.fetchRecurseSubmodules
+ ) &&
+ test_cmp expect.out actual.out &&
+ test_cmp expect.err actual.err
+'
+
+test_expect_success "--quiet propagates to submodules" '
+ (
+ cd downstream &&
+ git fetch --recurse-submodules --quiet >../actual.out 2>../actual.err
+ ) &&
+ ! test -s actual.out &&
+ ! test -s actual.err
+'
+
+test_expect_success "--dry-run propagates to submodules" '
+ add_upstream_commit &&
+ (
+ cd downstream &&
+ git fetch --recurse-submodules --dry-run >../actual.out 2>../actual.err
+ ) &&
+ test_cmp expect.out actual.out &&
+ test_cmp expect.err actual.err &&
+ (
+ cd downstream &&
+ git fetch --recurse-submodules >../actual.out 2>../actual.err
+ ) &&
+ test_cmp expect.out actual.out &&
+ test_cmp expect.err actual.err
+'
+
+test_expect_success "recurseSubmodules=true propagates into submodules" '
+ add_upstream_commit &&
+ (
+ cd downstream &&
+ git config fetch.recurseSubmodules true
+ git fetch >../actual.out 2>../actual.err
+ ) &&
+ test_cmp expect.out actual.out &&
+ test_cmp expect.err actual.err
+'
+
+test_expect_success "--recurse-submodules overrides config in submodule" '
+ add_upstream_commit &&
+ (
+ cd downstream &&
+ (
+ cd submodule &&
+ git config fetch.recurseSubmodules false
+ ) &&
+ git fetch --recurse-submodules >../actual.out 2>../actual.err
+ ) &&
+ test_cmp expect.out actual.out &&
+ test_cmp expect.err actual.err
+'
+
+test_expect_success "--no-recurse-submodules overrides config setting" '
+ add_upstream_commit &&
+ (
+ cd downstream &&
+ git config fetch.recurseSubmodules true
+ git fetch --no-recurse-submodules >../actual.out 2>../actual.err
+ ) &&
+ ! test -s actual.out &&
+ ! test -s actual.err
+'
+
+test_done
'
test_expect_success 'clone http repository' '
- git clone $HTTPD_URL/dumb/repo.git clone &&
+ git clone $HTTPD_URL/dumb/repo.git clone-tmpl &&
+ cp -R clone-tmpl clone &&
test_cmp file clone/file
'
test_expect_success 'fetch changes via http' '
echo content >>file &&
git commit -a -m two &&
- git push public
+ git push public &&
(cd clone && git pull) &&
test_cmp file clone/file
'
+test_expect_success 'fetch changes via manual http-fetch' '
+ cp -R clone-tmpl clone2 &&
+
+ HEAD=$(git rev-parse --verify HEAD) &&
+ (cd clone2 &&
+ git http-fetch -a -w heads/master-new $HEAD $(git config remote.origin.url) &&
+ git checkout master-new &&
+ test $HEAD = $(git rev-parse --verify HEAD)) &&
+ test_cmp file clone2/file
+'
+
test_expect_success 'http remote detects correct HEAD' '
git push public master:other &&
(cd clone &&
--- /dev/null
+#!/bin/sh
+
+test_description='basic git gc tests
+'
+
+. ./test-lib.sh
+
+test_expect_success 'gc empty repository' '
+ git gc
+'
+
+test_expect_success 'gc --gobbledegook' '
+ test_expect_code 129 git gc --nonsense 2>err &&
+ grep "[Uu]sage: git gc" err
+'
+
+test_expect_success 'gc -h with invalid configuration' '
+ mkdir broken &&
+ (
+ cd broken &&
+ git init &&
+ echo "[gc] pruneexpire = CORRUPT" >>.git/config &&
+ test_expect_code 129 git gc -h >usage 2>&1
+ ) &&
+ grep "[Uu]sage" broken/usage
+'
+
+test_done
git commit -m "repo commit 1"
) &&
git clone --bare repo/ bare.git &&
- cd addtest &&
- git submodule add "$submodurl/repo" &&
- git config -f .gitmodules submodule.repo.path repo &&
- git submodule add "$submodurl/bare.git" &&
- git config -f .gitmodules submodule.bare.path bare
+ (
+ cd addtest &&
+ git submodule add "$submodurl/repo" &&
+ git config -f .gitmodules submodule.repo.path repo &&
+ git submodule add "$submodurl/bare.git" &&
+ git config -f .gitmodules submodule.bare.path bare
+ )
+'
+
+test_expect_success 'add should fail when path is used by a file' '
+ (
+ cd addtest &&
+ touch file &&
+ test_must_fail git submodule add "$submodurl/repo" file
+ )
+'
+
+test_expect_success 'add should fail when path is used by an existing directory' '
+ (
+ cd addtest &&
+ mkdir empty-dir &&
+ test_must_fail git submodule add "$submodurl/repo" empty-dir
+ )
'
test_done
. ./test-lib.sh
+test_expect_success 'status -h in broken repository' '
+ mkdir broken &&
+ test_when_finished "rm -fr broken" &&
+ (
+ cd broken &&
+ git init &&
+ echo "[status] showuntrackedfiles = CORRUPT" >>.git/config &&
+ test_expect_code 129 git status -h >usage 2>&1
+ ) &&
+ grep "[Uu]sage" broken/usage
+'
+
+test_expect_success 'commit -h in broken repository' '
+ mkdir broken &&
+ test_when_finished "rm -fr broken" &&
+ (
+ cd broken &&
+ git init &&
+ echo "[status] showuntrackedfiles = CORRUPT" >>.git/config &&
+ test_expect_code 129 git commit -h >usage 2>&1
+ ) &&
+ grep "[Uu]sage" broken/usage
+'
+
test_expect_success 'setup' '
: >tracked &&
: >modified &&
test_expect_success 'setup unique colors' '
- git config status.color.untracked blue
+ git config status.color.untracked blue &&
+ git config status.color.branch green
'
cat >expect <<\EOF
-# On branch master
+# On branch <GREEN>master<RESET>
# Changes to be committed:
# (use "git reset HEAD <file>..." to unstage)
#
test_must_fail git merge
'
+test_expect_success 'merge -h with invalid index' '
+ mkdir broken &&
+ (
+ cd broken &&
+ git init &&
+ >.git/index &&
+ test_expect_code 129 git merge -h 2>usage
+ ) &&
+ grep "[Uu]sage: git merge" broken/usage
+'
+
test_expect_success 'reject non-strategy with a git-merge-foo name' '
test_must_fail git merge -s index c1
'
+++ /dev/null
-#!/bin/sh
-
-test_description='test aborting in-progress merges
-
-Set up repo with conflicting and non-conflicting branches:
-
-There are three files foo/bar/baz, and the following graph illustrates the
-content of these files in each commit:
-
-# foo/bar/baz --- foo/bar/bazz <-- master
-# \
-# --- foo/barf/bazf <-- conflict_branch
-# \
-# --- foo/bart/baz <-- clean_branch
-
-Next, test git merge --abort with the following variables:
-- before/after successful merge (should fail when not in merge context)
-- with/without conflicts
-- clean/dirty index before merge
-- clean/dirty worktree before merge
-- dirty index before merge matches contents on remote branch
-- changed/unchanged worktree after merge
-- changed/unchanged index after merge
-'
-. ./test-lib.sh
-
-test_expect_success 'setup' '
- # Create the above repo
- echo foo > foo &&
- echo bar > bar &&
- echo baz > baz &&
- git add foo bar baz &&
- git commit -m initial &&
- echo bazz > baz &&
- git commit -a -m "second" &&
- git checkout -b conflict_branch HEAD^ &&
- echo barf > bar &&
- echo bazf > baz &&
- git commit -a -m "conflict" &&
- git checkout -b clean_branch HEAD^ &&
- echo bart > bar &&
- git commit -a -m "clean" &&
- git checkout master
-'
-
-pre_merge_head="$(git rev-parse HEAD)"
-
-test_expect_success 'fails without MERGE_HEAD (unstarted merge)' '
- test_must_fail git merge --abort 2>output &&
- grep -q MERGE_HEAD output &&
- test ! -f .git/MERGE_HEAD &&
- test "$pre_merge_head" = "$(git rev-parse HEAD)"
-'
-
-test_expect_success 'fails without MERGE_HEAD (completed merge)' '
- git merge clean_branch &&
- test ! -f .git/MERGE_HEAD &&
- # Merge successfully completed
- post_merge_head="$(git rev-parse HEAD)" &&
- test_must_fail git merge --abort 2>output &&
- grep -q MERGE_HEAD output &&
- test ! -f .git/MERGE_HEAD &&
- test "$post_merge_head" = "$(git rev-parse HEAD)"
-'
-
-test_expect_success 'Forget previous merge' '
- git reset --hard "$pre_merge_head"
-'
-
-test_expect_success 'Abort after --no-commit' '
- # Redo merge, but stop before creating merge commit
- git merge --no-commit clean_branch &&
- test -f .git/MERGE_HEAD &&
- # Abort non-conflicting merge
- git merge --abort &&
- test ! -f .git/MERGE_HEAD &&
- test "$pre_merge_head" = "$(git rev-parse HEAD)" &&
- test -z "$(git diff)" &&
- test -z "$(git diff --staged)"
-'
-
-test_expect_success 'Abort after conflicts' '
- # Create conflicting merge
- test_must_fail git merge conflict_branch &&
- test -f .git/MERGE_HEAD &&
- # Abort conflicting merge
- git merge --abort &&
- test ! -f .git/MERGE_HEAD &&
- test "$pre_merge_head" = "$(git rev-parse HEAD)" &&
- test -z "$(git diff)" &&
- test -z "$(git diff --staged)"
-'
-
-test_expect_success 'Clean merge with dirty index fails' '
- echo xyzzy >> foo &&
- git add foo &&
- git diff --staged > expect &&
- test_must_fail git merge clean_branch &&
- test ! -f .git/MERGE_HEAD &&
- test "$pre_merge_head" = "$(git rev-parse HEAD)" &&
- test -z "$(git diff)" &&
- git diff --staged > actual &&
- test_cmp expect actual
-'
-
-test_expect_success 'Conflicting merge with dirty index fails' '
- test_must_fail git merge conflict_branch &&
- test ! -f .git/MERGE_HEAD &&
- test "$pre_merge_head" = "$(git rev-parse HEAD)" &&
- test -z "$(git diff)" &&
- git diff --staged > actual &&
- test_cmp expect actual
-'
-
-test_expect_success 'Reset index (but preserve worktree changes)' '
- git reset "$pre_merge_head" &&
- git diff > actual &&
- test_cmp expect actual
-'
-
-test_expect_success 'Abort clean merge with non-conflicting dirty worktree' '
- git merge --no-commit clean_branch &&
- test -f .git/MERGE_HEAD &&
- # Abort merge
- git merge --abort &&
- test ! -f .git/MERGE_HEAD &&
- test "$pre_merge_head" = "$(git rev-parse HEAD)" &&
- test -z "$(git diff --staged)" &&
- git diff > actual &&
- test_cmp expect actual
-'
-
-test_expect_success 'Abort conflicting merge with non-conflicting dirty worktree' '
- test_must_fail git merge conflict_branch &&
- test -f .git/MERGE_HEAD &&
- # Abort merge
- git merge --abort &&
- test ! -f .git/MERGE_HEAD &&
- test "$pre_merge_head" = "$(git rev-parse HEAD)" &&
- test -z "$(git diff --staged)" &&
- git diff > actual &&
- test_cmp expect actual
-'
-
-test_expect_success 'Reset worktree changes' '
- git reset --hard "$pre_merge_head"
-'
-
-test_expect_success 'Fail clean merge with conflicting dirty worktree' '
- echo xyzzy >> bar &&
- git diff > expect &&
- test_must_fail git merge --no-commit clean_branch &&
- test ! -f .git/MERGE_HEAD &&
- test "$pre_merge_head" = "$(git rev-parse HEAD)" &&
- test -z "$(git diff --staged)" &&
- git diff > actual &&
- test_cmp expect actual
-'
-
-test_expect_success 'Fail conflicting merge with conflicting dirty worktree' '
- test_must_fail git merge conflict_branch &&
- test ! -f .git/MERGE_HEAD &&
- test "$pre_merge_head" = "$(git rev-parse HEAD)" &&
- test -z "$(git diff --staged)" &&
- git diff > actual &&
- test_cmp expect actual
-'
-
-test_expect_success 'Reset worktree changes' '
- git reset --hard "$pre_merge_head"
-'
-
-test_expect_success 'Fail clean merge with matching dirty worktree' '
- echo bart > bar &&
- git diff > expect &&
- test_must_fail git merge --no-commit clean_branch &&
- test ! -f .git/MERGE_HEAD &&
- test "$pre_merge_head" = "$(git rev-parse HEAD)" &&
- test -z "$(git diff --staged)" &&
- git diff > actual &&
- test_cmp expect actual
-'
-
-test_expect_success 'Abort clean merge with matching dirty index' '
- git add bar &&
- git diff --staged > expect &&
- git merge --no-commit clean_branch &&
- test -f .git/MERGE_HEAD &&
- ### When aborting the merge, git will discard all staged changes,
- ### including those that were staged pre-merge. In other words,
- ### --abort will LOSE any staged changes (the staged changes that
- ### are lost must match the merge result, or the merge would not
- ### have been allowed to start). Change expectations accordingly:
- rm expect &&
- touch expect &&
- # Abort merge
- git merge --abort &&
- test ! -f .git/MERGE_HEAD &&
- test "$pre_merge_head" = "$(git rev-parse HEAD)" &&
- git diff --staged > actual &&
- test_cmp expect actual &&
- test -z "$(git diff)"
-'
-
-test_expect_success 'Reset worktree changes' '
- git reset --hard "$pre_merge_head"
-'
-
-test_expect_success 'Fail conflicting merge with matching dirty worktree' '
- echo barf > bar &&
- git diff > expect &&
- test_must_fail git merge conflict_branch &&
- test ! -f .git/MERGE_HEAD &&
- test "$pre_merge_head" = "$(git rev-parse HEAD)" &&
- test -z "$(git diff --staged)" &&
- git diff > actual &&
- test_cmp expect actual
-'
-
-test_expect_success 'Abort conflicting merge with matching dirty index' '
- git add bar &&
- git diff --staged > expect &&
- test_must_fail git merge conflict_branch &&
- test -f .git/MERGE_HEAD &&
- ### When aborting the merge, git will discard all staged changes,
- ### including those that were staged pre-merge. In other words,
- ### --abort will LOSE any staged changes (the staged changes that
- ### are lost must match the merge result, or the merge would not
- ### have been allowed to start). Change expectations accordingly:
- rm expect &&
- touch expect &&
- # Abort merge
- git merge --abort &&
- test ! -f .git/MERGE_HEAD &&
- test "$pre_merge_head" = "$(git rev-parse HEAD)" &&
- git diff --staged > actual &&
- test_cmp expect actual &&
- test -z "$(git diff)"
-'
-
-test_expect_success 'Reset worktree changes' '
- git reset --hard "$pre_merge_head"
-'
-
-test_expect_success 'Abort merge with pre- and post-merge worktree changes' '
- # Pre-merge worktree changes
- echo xyzzy > foo &&
- echo barf > bar &&
- git add bar &&
- git diff > expect &&
- git diff --staged > expect-staged &&
- # Perform merge
- test_must_fail git merge conflict_branch &&
- test -f .git/MERGE_HEAD &&
- # Post-merge worktree changes
- echo yzxxz > foo &&
- echo blech > baz &&
- ### When aborting the merge, git will discard staged changes (bar)
- ### and unmerged changes (baz). Other changes that are neither
- ### staged nor marked as unmerged (foo), will be preserved. For
- ### these changed, git cannot tell pre-merge changes apart from
- ### post-merge changes, so the post-merge changes will be
- ### preserved. Change expectations accordingly:
- git diff -- foo > expect &&
- rm expect-staged &&
- touch expect-staged &&
- # Abort merge
- git merge --abort &&
- test ! -f .git/MERGE_HEAD &&
- test "$pre_merge_head" = "$(git rev-parse HEAD)" &&
- git diff > actual &&
- test_cmp expect actual &&
- git diff --staged > actual-staged &&
- test_cmp expect-staged actual-staged
-'
-
-test_expect_success 'Reset worktree changes' '
- git reset --hard "$pre_merge_head"
-'
-
-test_expect_success 'Abort merge with pre- and post-merge index changes' '
- # Pre-merge worktree changes
- echo xyzzy > foo &&
- echo barf > bar &&
- git add bar &&
- git diff > expect &&
- git diff --staged > expect-staged &&
- # Perform merge
- test_must_fail git merge conflict_branch &&
- test -f .git/MERGE_HEAD &&
- # Post-merge worktree changes
- echo yzxxz > foo &&
- echo blech > baz &&
- git add foo bar &&
- ### When aborting the merge, git will discard all staged changes
- ### (foo, bar and baz), and no changes will be preserved. Whether
- ### the changes were staged pre- or post-merge does not matter
- ### (except for not preventing starting the merge).
- ### Change expectations accordingly:
- rm expect expect-staged &&
- touch expect &&
- touch expect-staged &&
- # Abort merge
- git merge --abort &&
- test ! -f .git/MERGE_HEAD &&
- test "$pre_merge_head" = "$(git rev-parse HEAD)" &&
- git diff > actual &&
- test_cmp expect actual &&
- git diff --staged > actual-staged &&
- test_cmp expect-staged actual-staged
-'
-
-test_done
--- /dev/null
+#!/bin/sh
+
+test_description='test aborting in-progress merges
+
+Set up repo with conflicting and non-conflicting branches:
+
+There are three files foo/bar/baz, and the following graph illustrates the
+content of these files in each commit:
+
+# foo/bar/baz --- foo/bar/bazz <-- master
+# \
+# --- foo/barf/bazf <-- conflict_branch
+# \
+# --- foo/bart/baz <-- clean_branch
+
+Next, test git merge --abort with the following variables:
+- before/after successful merge (should fail when not in merge context)
+- with/without conflicts
+- clean/dirty index before merge
+- clean/dirty worktree before merge
+- dirty index before merge matches contents on remote branch
+- changed/unchanged worktree after merge
+- changed/unchanged index after merge
+'
+. ./test-lib.sh
+
+test_expect_success 'setup' '
+ # Create the above repo
+ echo foo > foo &&
+ echo bar > bar &&
+ echo baz > baz &&
+ git add foo bar baz &&
+ git commit -m initial &&
+ echo bazz > baz &&
+ git commit -a -m "second" &&
+ git checkout -b conflict_branch HEAD^ &&
+ echo barf > bar &&
+ echo bazf > baz &&
+ git commit -a -m "conflict" &&
+ git checkout -b clean_branch HEAD^ &&
+ echo bart > bar &&
+ git commit -a -m "clean" &&
+ git checkout master
+'
+
+pre_merge_head="$(git rev-parse HEAD)"
+
+test_expect_success 'fails without MERGE_HEAD (unstarted merge)' '
+ test_must_fail git merge --abort 2>output &&
+ grep -q MERGE_HEAD output &&
+ test ! -f .git/MERGE_HEAD &&
+ test "$pre_merge_head" = "$(git rev-parse HEAD)"
+'
+
+test_expect_success 'fails without MERGE_HEAD (completed merge)' '
+ git merge clean_branch &&
+ test ! -f .git/MERGE_HEAD &&
+ # Merge successfully completed
+ post_merge_head="$(git rev-parse HEAD)" &&
+ test_must_fail git merge --abort 2>output &&
+ grep -q MERGE_HEAD output &&
+ test ! -f .git/MERGE_HEAD &&
+ test "$post_merge_head" = "$(git rev-parse HEAD)"
+'
+
+test_expect_success 'Forget previous merge' '
+ git reset --hard "$pre_merge_head"
+'
+
+test_expect_success 'Abort after --no-commit' '
+ # Redo merge, but stop before creating merge commit
+ git merge --no-commit clean_branch &&
+ test -f .git/MERGE_HEAD &&
+ # Abort non-conflicting merge
+ git merge --abort &&
+ test ! -f .git/MERGE_HEAD &&
+ test "$pre_merge_head" = "$(git rev-parse HEAD)" &&
+ test -z "$(git diff)" &&
+ test -z "$(git diff --staged)"
+'
+
+test_expect_success 'Abort after conflicts' '
+ # Create conflicting merge
+ test_must_fail git merge conflict_branch &&
+ test -f .git/MERGE_HEAD &&
+ # Abort conflicting merge
+ git merge --abort &&
+ test ! -f .git/MERGE_HEAD &&
+ test "$pre_merge_head" = "$(git rev-parse HEAD)" &&
+ test -z "$(git diff)" &&
+ test -z "$(git diff --staged)"
+'
+
+test_expect_success 'Clean merge with dirty index fails' '
+ echo xyzzy >> foo &&
+ git add foo &&
+ git diff --staged > expect &&
+ test_must_fail git merge clean_branch &&
+ test ! -f .git/MERGE_HEAD &&
+ test "$pre_merge_head" = "$(git rev-parse HEAD)" &&
+ test -z "$(git diff)" &&
+ git diff --staged > actual &&
+ test_cmp expect actual
+'
+
+test_expect_success 'Conflicting merge with dirty index fails' '
+ test_must_fail git merge conflict_branch &&
+ test ! -f .git/MERGE_HEAD &&
+ test "$pre_merge_head" = "$(git rev-parse HEAD)" &&
+ test -z "$(git diff)" &&
+ git diff --staged > actual &&
+ test_cmp expect actual
+'
+
+test_expect_success 'Reset index (but preserve worktree changes)' '
+ git reset "$pre_merge_head" &&
+ git diff > actual &&
+ test_cmp expect actual
+'
+
+test_expect_success 'Abort clean merge with non-conflicting dirty worktree' '
+ git merge --no-commit clean_branch &&
+ test -f .git/MERGE_HEAD &&
+ # Abort merge
+ git merge --abort &&
+ test ! -f .git/MERGE_HEAD &&
+ test "$pre_merge_head" = "$(git rev-parse HEAD)" &&
+ test -z "$(git diff --staged)" &&
+ git diff > actual &&
+ test_cmp expect actual
+'
+
+test_expect_success 'Abort conflicting merge with non-conflicting dirty worktree' '
+ test_must_fail git merge conflict_branch &&
+ test -f .git/MERGE_HEAD &&
+ # Abort merge
+ git merge --abort &&
+ test ! -f .git/MERGE_HEAD &&
+ test "$pre_merge_head" = "$(git rev-parse HEAD)" &&
+ test -z "$(git diff --staged)" &&
+ git diff > actual &&
+ test_cmp expect actual
+'
+
+test_expect_success 'Reset worktree changes' '
+ git reset --hard "$pre_merge_head"
+'
+
+test_expect_success 'Fail clean merge with conflicting dirty worktree' '
+ echo xyzzy >> bar &&
+ git diff > expect &&
+ test_must_fail git merge --no-commit clean_branch &&
+ test ! -f .git/MERGE_HEAD &&
+ test "$pre_merge_head" = "$(git rev-parse HEAD)" &&
+ test -z "$(git diff --staged)" &&
+ git diff > actual &&
+ test_cmp expect actual
+'
+
+test_expect_success 'Fail conflicting merge with conflicting dirty worktree' '
+ test_must_fail git merge conflict_branch &&
+ test ! -f .git/MERGE_HEAD &&
+ test "$pre_merge_head" = "$(git rev-parse HEAD)" &&
+ test -z "$(git diff --staged)" &&
+ git diff > actual &&
+ test_cmp expect actual
+'
+
+test_expect_success 'Reset worktree changes' '
+ git reset --hard "$pre_merge_head"
+'
+
+test_expect_success 'Fail clean merge with matching dirty worktree' '
+ echo bart > bar &&
+ git diff > expect &&
+ test_must_fail git merge --no-commit clean_branch &&
+ test ! -f .git/MERGE_HEAD &&
+ test "$pre_merge_head" = "$(git rev-parse HEAD)" &&
+ test -z "$(git diff --staged)" &&
+ git diff > actual &&
+ test_cmp expect actual
+'
+
+test_expect_success 'Abort clean merge with matching dirty index' '
+ git add bar &&
+ git diff --staged > expect &&
+ git merge --no-commit clean_branch &&
+ test -f .git/MERGE_HEAD &&
+ ### When aborting the merge, git will discard all staged changes,
+ ### including those that were staged pre-merge. In other words,
+ ### --abort will LOSE any staged changes (the staged changes that
+ ### are lost must match the merge result, or the merge would not
+ ### have been allowed to start). Change expectations accordingly:
+ rm expect &&
+ touch expect &&
+ # Abort merge
+ git merge --abort &&
+ test ! -f .git/MERGE_HEAD &&
+ test "$pre_merge_head" = "$(git rev-parse HEAD)" &&
+ git diff --staged > actual &&
+ test_cmp expect actual &&
+ test -z "$(git diff)"
+'
+
+test_expect_success 'Reset worktree changes' '
+ git reset --hard "$pre_merge_head"
+'
+
+test_expect_success 'Fail conflicting merge with matching dirty worktree' '
+ echo barf > bar &&
+ git diff > expect &&
+ test_must_fail git merge conflict_branch &&
+ test ! -f .git/MERGE_HEAD &&
+ test "$pre_merge_head" = "$(git rev-parse HEAD)" &&
+ test -z "$(git diff --staged)" &&
+ git diff > actual &&
+ test_cmp expect actual
+'
+
+test_expect_success 'Abort conflicting merge with matching dirty index' '
+ git add bar &&
+ git diff --staged > expect &&
+ test_must_fail git merge conflict_branch &&
+ test -f .git/MERGE_HEAD &&
+ ### When aborting the merge, git will discard all staged changes,
+ ### including those that were staged pre-merge. In other words,
+ ### --abort will LOSE any staged changes (the staged changes that
+ ### are lost must match the merge result, or the merge would not
+ ### have been allowed to start). Change expectations accordingly:
+ rm expect &&
+ touch expect &&
+ # Abort merge
+ git merge --abort &&
+ test ! -f .git/MERGE_HEAD &&
+ test "$pre_merge_head" = "$(git rev-parse HEAD)" &&
+ git diff --staged > actual &&
+ test_cmp expect actual &&
+ test -z "$(git diff)"
+'
+
+test_expect_success 'Reset worktree changes' '
+ git reset --hard "$pre_merge_head"
+'
+
+test_expect_success 'Abort merge with pre- and post-merge worktree changes' '
+ # Pre-merge worktree changes
+ echo xyzzy > foo &&
+ echo barf > bar &&
+ git add bar &&
+ git diff > expect &&
+ git diff --staged > expect-staged &&
+ # Perform merge
+ test_must_fail git merge conflict_branch &&
+ test -f .git/MERGE_HEAD &&
+ # Post-merge worktree changes
+ echo yzxxz > foo &&
+ echo blech > baz &&
+ ### When aborting the merge, git will discard staged changes (bar)
+ ### and unmerged changes (baz). Other changes that are neither
+ ### staged nor marked as unmerged (foo), will be preserved. For
+ ### these changed, git cannot tell pre-merge changes apart from
+ ### post-merge changes, so the post-merge changes will be
+ ### preserved. Change expectations accordingly:
+ git diff -- foo > expect &&
+ rm expect-staged &&
+ touch expect-staged &&
+ # Abort merge
+ git merge --abort &&
+ test ! -f .git/MERGE_HEAD &&
+ test "$pre_merge_head" = "$(git rev-parse HEAD)" &&
+ git diff > actual &&
+ test_cmp expect actual &&
+ git diff --staged > actual-staged &&
+ test_cmp expect-staged actual-staged
+'
+
+test_expect_success 'Reset worktree changes' '
+ git reset --hard "$pre_merge_head"
+'
+
+test_expect_success 'Abort merge with pre- and post-merge index changes' '
+ # Pre-merge worktree changes
+ echo xyzzy > foo &&
+ echo barf > bar &&
+ git add bar &&
+ git diff > expect &&
+ git diff --staged > expect-staged &&
+ # Perform merge
+ test_must_fail git merge conflict_branch &&
+ test -f .git/MERGE_HEAD &&
+ # Post-merge worktree changes
+ echo yzxxz > foo &&
+ echo blech > baz &&
+ git add foo bar &&
+ ### When aborting the merge, git will discard all staged changes
+ ### (foo, bar and baz), and no changes will be preserved. Whether
+ ### the changes were staged pre- or post-merge does not matter
+ ### (except for not preventing starting the merge).
+ ### Change expectations accordingly:
+ rm expect expect-staged &&
+ touch expect &&
+ touch expect-staged &&
+ # Abort merge
+ git merge --abort &&
+ test ! -f .git/MERGE_HEAD &&
+ test "$pre_merge_head" = "$(git rev-parse HEAD)" &&
+ git diff > actual &&
+ test_cmp expect actual &&
+ git diff --staged > actual-staged &&
+ test_cmp expect-staged actual-staged
+'
+
+test_done
--- /dev/null
+#!/bin/sh
+
+test_description='git blame corner cases'
+. ./test-lib.sh
+
+pick_fc='s/^[0-9a-f^]* *\([^ ]*\) *(\([^ ]*\) .*/\1-\2/'
+
+test_expect_success setup '
+
+ echo A A A A A >one &&
+ echo B B B B B >two &&
+ echo C C C C C >tres &&
+ echo ABC >mouse &&
+ for i in 1 2 3 4 5 6 7 8 9
+ do
+ echo $i
+ done >nine_lines &&
+ for i in 1 2 3 4 5 6 7 8 9 a
+ do
+ echo $i
+ done >ten_lines &&
+ git add one two tres mouse nine_lines ten_lines &&
+ test_tick &&
+ GIT_AUTHOR_NAME=Initial git commit -m Initial &&
+
+ cat one >uno &&
+ mv two dos &&
+ cat one >>tres &&
+ echo DEF >>mouse
+ git add uno dos tres mouse &&
+ test_tick &&
+ GIT_AUTHOR_NAME=Second git commit -a -m Second &&
+
+ echo GHIJK >>mouse &&
+ git add mouse &&
+ test_tick &&
+ GIT_AUTHOR_NAME=Third git commit -m Third &&
+
+ cat mouse >cow &&
+ git add cow &&
+ test_tick &&
+ GIT_AUTHOR_NAME=Fourth git commit -m Fourth &&
+
+ {
+ echo ABC
+ echo DEF
+ echo XXXX
+ echo GHIJK
+ } >cow &&
+ git add cow &&
+ test_tick &&
+ GIT_AUTHOR_NAME=Fifth git commit -m Fifth
+'
+
+test_expect_success 'straight copy without -C' '
+
+ git blame uno | grep Second
+
+'
+
+test_expect_success 'straight move without -C' '
+
+ git blame dos | grep Initial
+
+'
+
+test_expect_success 'straight copy with -C' '
+
+ git blame -C1 uno | grep Second
+
+'
+
+test_expect_success 'straight move with -C' '
+
+ git blame -C1 dos | grep Initial
+
+'
+
+test_expect_success 'straight copy with -C -C' '
+
+ git blame -C -C1 uno | grep Initial
+
+'
+
+test_expect_success 'straight move with -C -C' '
+
+ git blame -C -C1 dos | grep Initial
+
+'
+
+test_expect_success 'append without -C' '
+
+ git blame -L2 tres | grep Second
+
+'
+
+test_expect_success 'append with -C' '
+
+ git blame -L2 -C1 tres | grep Second
+
+'
+
+test_expect_success 'append with -C -C' '
+
+ git blame -L2 -C -C1 tres | grep Second
+
+'
+
+test_expect_success 'append with -C -C -C' '
+
+ git blame -L2 -C -C -C1 tres | grep Initial
+
+'
+
+test_expect_success 'blame wholesale copy' '
+
+ git blame -f -C -C1 HEAD^ -- cow | sed -e "$pick_fc" >current &&
+ {
+ echo mouse-Initial
+ echo mouse-Second
+ echo mouse-Third
+ } >expected &&
+ test_cmp expected current
+
+'
+
+test_expect_success 'blame wholesale copy and more' '
+
+ git blame -f -C -C1 HEAD -- cow | sed -e "$pick_fc" >current &&
+ {
+ echo mouse-Initial
+ echo mouse-Second
+ echo cow-Fifth
+ echo mouse-Third
+ } >expected &&
+ test_cmp expected current
+
+'
+
+test_expect_success 'blame path that used to be a directory' '
+ mkdir path &&
+ echo A A A A A >path/file &&
+ echo B B B B B >path/elif &&
+ git add path &&
+ test_tick &&
+ git commit -m "path was a directory" &&
+ rm -fr path &&
+ echo A A A A A >path &&
+ git add path &&
+ test_tick &&
+ git commit -m "path is a regular file" &&
+ git blame HEAD^.. -- path
+'
+
+test_expect_success 'blame to a commit with no author name' '
+ TREE=`git rev-parse HEAD:`
+ cat >badcommit <<EOF
+tree $TREE
+author <noname> 1234567890 +0000
+committer David Reiss <dreiss@facebook.com> 1234567890 +0000
+
+some message
+EOF
+ COMMIT=`git hash-object -t commit -w badcommit`
+ git --no-pager blame $COMMIT -- uno >/dev/null
+'
+
+test_expect_success 'blame -L with invalid start' '
+ test_must_fail git blame -L5 tres 2>errors &&
+ grep "has only 2 lines" errors
+'
+
+test_expect_success 'blame -L with invalid end' '
+ test_must_fail git blame -L1,5 tres 2>errors &&
+ grep "has only 2 lines" errors
+'
+
+test_expect_success 'indent of line numbers, nine lines' '
+ git blame nine_lines >actual &&
+ test $(grep -c " " actual) = 0
+'
+
+test_expect_success 'indent of line numbers, ten lines' '
+ git blame ten_lines >actual &&
+ test $(grep -c " " actual) = 9
+'
+
+test_done
+++ /dev/null
-#!/bin/sh
-
-test_description='git blame corner cases'
-. ./test-lib.sh
-
-pick_fc='s/^[0-9a-f^]* *\([^ ]*\) *(\([^ ]*\) .*/\1-\2/'
-
-test_expect_success setup '
-
- echo A A A A A >one &&
- echo B B B B B >two &&
- echo C C C C C >tres &&
- echo ABC >mouse &&
- for i in 1 2 3 4 5 6 7 8 9
- do
- echo $i
- done >nine_lines &&
- for i in 1 2 3 4 5 6 7 8 9 a
- do
- echo $i
- done >ten_lines &&
- git add one two tres mouse nine_lines ten_lines &&
- test_tick &&
- GIT_AUTHOR_NAME=Initial git commit -m Initial &&
-
- cat one >uno &&
- mv two dos &&
- cat one >>tres &&
- echo DEF >>mouse
- git add uno dos tres mouse &&
- test_tick &&
- GIT_AUTHOR_NAME=Second git commit -a -m Second &&
-
- echo GHIJK >>mouse &&
- git add mouse &&
- test_tick &&
- GIT_AUTHOR_NAME=Third git commit -m Third &&
-
- cat mouse >cow &&
- git add cow &&
- test_tick &&
- GIT_AUTHOR_NAME=Fourth git commit -m Fourth &&
-
- {
- echo ABC
- echo DEF
- echo XXXX
- echo GHIJK
- } >cow &&
- git add cow &&
- test_tick &&
- GIT_AUTHOR_NAME=Fifth git commit -m Fifth
-'
-
-test_expect_success 'straight copy without -C' '
-
- git blame uno | grep Second
-
-'
-
-test_expect_success 'straight move without -C' '
-
- git blame dos | grep Initial
-
-'
-
-test_expect_success 'straight copy with -C' '
-
- git blame -C1 uno | grep Second
-
-'
-
-test_expect_success 'straight move with -C' '
-
- git blame -C1 dos | grep Initial
-
-'
-
-test_expect_success 'straight copy with -C -C' '
-
- git blame -C -C1 uno | grep Initial
-
-'
-
-test_expect_success 'straight move with -C -C' '
-
- git blame -C -C1 dos | grep Initial
-
-'
-
-test_expect_success 'append without -C' '
-
- git blame -L2 tres | grep Second
-
-'
-
-test_expect_success 'append with -C' '
-
- git blame -L2 -C1 tres | grep Second
-
-'
-
-test_expect_success 'append with -C -C' '
-
- git blame -L2 -C -C1 tres | grep Second
-
-'
-
-test_expect_success 'append with -C -C -C' '
-
- git blame -L2 -C -C -C1 tres | grep Initial
-
-'
-
-test_expect_success 'blame wholesale copy' '
-
- git blame -f -C -C1 HEAD^ -- cow | sed -e "$pick_fc" >current &&
- {
- echo mouse-Initial
- echo mouse-Second
- echo mouse-Third
- } >expected &&
- test_cmp expected current
-
-'
-
-test_expect_success 'blame wholesale copy and more' '
-
- git blame -f -C -C1 HEAD -- cow | sed -e "$pick_fc" >current &&
- {
- echo mouse-Initial
- echo mouse-Second
- echo cow-Fifth
- echo mouse-Third
- } >expected &&
- test_cmp expected current
-
-'
-
-test_expect_success 'blame path that used to be a directory' '
- mkdir path &&
- echo A A A A A >path/file &&
- echo B B B B B >path/elif &&
- git add path &&
- test_tick &&
- git commit -m "path was a directory" &&
- rm -fr path &&
- echo A A A A A >path &&
- git add path &&
- test_tick &&
- git commit -m "path is a regular file" &&
- git blame HEAD^.. -- path
-'
-
-test_expect_success 'blame to a commit with no author name' '
- TREE=`git rev-parse HEAD:`
- cat >badcommit <<EOF
-tree $TREE
-author <noname> 1234567890 +0000
-committer David Reiss <dreiss@facebook.com> 1234567890 +0000
-
-some message
-EOF
- COMMIT=`git hash-object -t commit -w badcommit`
- git --no-pager blame $COMMIT -- uno >/dev/null
-'
-
-test_expect_success 'blame -L with invalid start' '
- test_must_fail git blame -L5 tres 2>errors &&
- grep "has only 2 lines" errors
-'
-
-test_expect_success 'blame -L with invalid end' '
- test_must_fail git blame -L1,5 tres 2>errors &&
- grep "has only 2 lines" errors
-'
-
-test_expect_success 'indent of line numbers, nine lines' '
- git blame nine_lines >actual &&
- test $(grep -c " " actual) = 0
-'
-
-test_expect_success 'indent of line numbers, ten lines' '
- git blame ten_lines >actual &&
- test $(grep -c " " actual) = 9
-'
-
-test_done
--- /dev/null
+#!/bin/sh
+
+# Based on a test case submitted by Björn Steinbrink.
+
+test_description='git blame on conflicted files'
+. ./test-lib.sh
+
+test_expect_success 'setup first case' '
+ # Create the old file
+ echo "Old line" > file1 &&
+ git add file1 &&
+ git commit --author "Old Line <ol@localhost>" -m file1.a &&
+
+ # Branch
+ git checkout -b foo &&
+
+ # Do an ugly move and change
+ git rm file1 &&
+ echo "New line ..." > file2 &&
+ echo "... and more" >> file2 &&
+ git add file2 &&
+ git commit --author "U Gly <ug@localhost>" -m ugly &&
+
+ # Back to master and change something
+ git checkout master &&
+ echo "
+
+bla" >> file1 &&
+ git commit --author "Old Line <ol@localhost>" -a -m file1.b &&
+
+ # Back to foo and merge master
+ git checkout foo &&
+ if git merge master; then
+ echo needed conflict here
+ exit 1
+ else
+ echo merge failed - resolving automatically
+ fi &&
+ echo "New line ...
+... and more
+
+bla
+Even more" > file2 &&
+ git rm file1 &&
+ git commit --author "M Result <mr@localhost>" -a -m merged &&
+
+ # Back to master and change file1 again
+ git checkout master &&
+ sed s/bla/foo/ <file1 >X &&
+ rm file1 &&
+ mv X file1 &&
+ git commit --author "No Bla <nb@localhost>" -a -m replace &&
+
+ # Try to merge into foo again
+ git checkout foo &&
+ if git merge master; then
+ echo needed conflict here
+ exit 1
+ else
+ echo merge failed - test is setup
+ fi
+'
+
+test_expect_success \
+ 'blame runs on unconflicted file while other file has conflicts' '
+ git blame file2
+'
+
+test_expect_success 'blame runs on conflicted file in stages 1,3' '
+ git blame file1
+'
+
+test_done
+++ /dev/null
-#!/bin/sh
-
-# Based on a test case submitted by Björn Steinbrink.
-
-test_description='git blame on conflicted files'
-. ./test-lib.sh
-
-test_expect_success 'setup first case' '
- # Create the old file
- echo "Old line" > file1 &&
- git add file1 &&
- git commit --author "Old Line <ol@localhost>" -m file1.a &&
-
- # Branch
- git checkout -b foo &&
-
- # Do an ugly move and change
- git rm file1 &&
- echo "New line ..." > file2 &&
- echo "... and more" >> file2 &&
- git add file2 &&
- git commit --author "U Gly <ug@localhost>" -m ugly &&
-
- # Back to master and change something
- git checkout master &&
- echo "
-
-bla" >> file1 &&
- git commit --author "Old Line <ol@localhost>" -a -m file1.b &&
-
- # Back to foo and merge master
- git checkout foo &&
- if git merge master; then
- echo needed conflict here
- exit 1
- else
- echo merge failed - resolving automatically
- fi &&
- echo "New line ...
-... and more
-
-bla
-Even more" > file2 &&
- git rm file1 &&
- git commit --author "M Result <mr@localhost>" -a -m merged &&
-
- # Back to master and change file1 again
- git checkout master &&
- sed s/bla/foo/ <file1 >X &&
- rm file1 &&
- mv X file1 &&
- git commit --author "No Bla <nb@localhost>" -a -m replace &&
-
- # Try to merge into foo again
- git checkout foo &&
- if git merge master; then
- echo needed conflict here
- exit 1
- else
- echo merge failed - test is setup
- fi
-'
-
-test_expect_success \
- 'blame runs on unconflicted file while other file has conflicts' '
- git blame file2
-'
-
-test_expect_success 'blame runs on conflicted file in stages 1,3' '
- git blame file1
-'
-
-test_done
test_description='check svn dumpfile importer'
-. ./lib-git-svn.sh
+. ./test-lib.sh
-test_dump() {
+if ! svnadmin -h >/dev/null 2>&1
+then
+ skip_all='skipping svn-fe tests, svn not available'
+ test_done
+fi
+
+svnconf=$PWD/svnconf
+export svnconf
+
+svn_cmd () {
+ subcommand=$1 &&
+ shift &&
+ mkdir -p "$svnconf" &&
+ svn "$subcommand" --config-dir "$svnconf" "$@"
+}
+
+test_dump () {
label=$1
dump=$2
test_expect_success "$dump" '
;;
esac
-ptouch() {
- perl -w -e '
- use strict;
- use POSIX qw(mktime);
- die "ptouch requires exactly 2 arguments" if @ARGV != 2;
- my $text_last_updated = shift @ARGV;
- my $git_file = shift @ARGV;
- die "\"$git_file\" does not exist" if ! -e $git_file;
- if ($text_last_updated
- =~ /(\d{4})-(\d{2})-(\d{2}) (\d{2}):(\d{2}):(\d{2})/) {
- my $mtime = mktime($6, $5, $4, $3, $2 - 1, $1 - 1900);
- my $atime = $mtime;
- utime $atime, $mtime, $git_file;
- }
- ' "`svn_cmd info $2 | grep '^Text Last Updated:'`" "$1"
+# On the "Text Last Updated" line, "git svn info" does not return the
+# same value as "svn info" (i.e. the commit timestamp that touched the
+# path most recently); do not expect that field to match.
+test_cmp_info () {
+ sed -e '/^Text Last Updated:/d' "$1" >tmp.expect
+ sed -e '/^Text Last Updated:/d' "$2" >tmp.actual
+ test_cmp tmp.expect tmp.actual &&
+ rm -f tmp.expect tmp.actual
}
quoted_svnrepo="$(echo $svnrepo | sed 's/ /%20/')"
cd gitwc &&
git svn init "$svnrepo" &&
git svn fetch
- ) &&
- ptouch gitwc/file svnwc/file &&
- ptouch gitwc/directory svnwc/directory &&
- ptouch gitwc/symlink-file svnwc/symlink-file &&
- ptouch gitwc/symlink-directory svnwc/symlink-directory
+ )
'
test_expect_success 'info' "
(cd svnwc; svn info) > expected.info &&
(cd gitwc; git svn info) > actual.info &&
- test_cmp expected.info actual.info
+ test_cmp_info expected.info actual.info
"
test_expect_success 'info --url' '
test_expect_success 'info .' "
(cd svnwc; svn info .) > expected.info-dot &&
(cd gitwc; git svn info .) > actual.info-dot &&
- test_cmp expected.info-dot actual.info-dot
+ test_cmp_info expected.info-dot actual.info-dot
"
test_expect_success 'info --url .' '
test_expect_success 'info file' "
(cd svnwc; svn info file) > expected.info-file &&
(cd gitwc; git svn info file) > actual.info-file &&
- test_cmp expected.info-file actual.info-file
+ test_cmp_info expected.info-file actual.info-file
"
test_expect_success 'info --url file' '
test_expect_success 'info directory' "
(cd svnwc; svn info directory) > expected.info-directory &&
(cd gitwc; git svn info directory) > actual.info-directory &&
- test_cmp expected.info-directory actual.info-directory
+ test_cmp_info expected.info-directory actual.info-directory
"
test_expect_success 'info inside directory' "
(cd svnwc/directory; svn info) > expected.info-inside-directory &&
(cd gitwc/directory; git svn info) > actual.info-inside-directory &&
- test_cmp expected.info-inside-directory actual.info-inside-directory
+ test_cmp_info expected.info-inside-directory actual.info-inside-directory
"
test_expect_success 'info --url directory' '
test_expect_success 'info symlink-file' "
(cd svnwc; svn info symlink-file) > expected.info-symlink-file &&
(cd gitwc; git svn info symlink-file) > actual.info-symlink-file &&
- test_cmp expected.info-symlink-file actual.info-symlink-file
+ test_cmp_info expected.info-symlink-file actual.info-symlink-file
"
test_expect_success 'info --url symlink-file' '
> expected.info-symlink-directory &&
(cd gitwc; git svn info symlink-directory) \
> actual.info-symlink-directory &&
- test_cmp expected.info-symlink-directory actual.info-symlink-directory
+ test_cmp_info expected.info-symlink-directory actual.info-symlink-directory
"
test_expect_success 'info --url symlink-directory' '
git add added-file
) &&
cp gitwc/added-file svnwc/added-file &&
- ptouch gitwc/added-file svnwc/added-file &&
(
cd svnwc &&
svn_cmd add added-file > /dev/null
) &&
(cd svnwc; svn info added-file) > expected.info-added-file &&
(cd gitwc; git svn info added-file) > actual.info-added-file &&
- test_cmp expected.info-added-file actual.info-added-file
+ test_cmp_info expected.info-added-file actual.info-added-file
"
test_expect_success 'info --url added-file' '
test_expect_success 'info added-directory' "
mkdir gitwc/added-directory svnwc/added-directory &&
- ptouch gitwc/added-directory svnwc/added-directory &&
touch gitwc/added-directory/.placeholder &&
(
cd svnwc &&
> expected.info-added-directory &&
(cd gitwc; git svn info added-directory) \
> actual.info-added-directory &&
- test_cmp expected.info-added-directory actual.info-added-directory
+ test_cmp_info expected.info-added-directory actual.info-added-directory
"
test_expect_success 'info --url added-directory' '
ln -s added-file added-symlink-file &&
svn_cmd add added-symlink-file > /dev/null
) &&
- ptouch gitwc/added-symlink-file svnwc/added-symlink-file &&
(cd svnwc; svn info added-symlink-file) \
> expected.info-added-symlink-file &&
(cd gitwc; git svn info added-symlink-file) \
> actual.info-added-symlink-file &&
- test_cmp expected.info-added-symlink-file \
- actual.info-added-symlink-file
+ test_cmp_info expected.info-added-symlink-file \
+ actual.info-added-symlink-file
"
test_expect_success 'info --url added-symlink-file' '
ln -s added-directory added-symlink-directory &&
svn_cmd add added-symlink-directory > /dev/null
) &&
- ptouch gitwc/added-symlink-directory svnwc/added-symlink-directory &&
(cd svnwc; svn info added-symlink-directory) \
> expected.info-added-symlink-directory &&
(cd gitwc; git svn info added-symlink-directory) \
> actual.info-added-symlink-directory &&
- test_cmp expected.info-added-symlink-directory \
- actual.info-added-symlink-directory
+ test_cmp_info expected.info-added-symlink-directory \
+ actual.info-added-symlink-directory
"
test_expect_success 'info --url added-symlink-directory' '
= "$quoted_svnrepo/added-symlink-directory"
'
-# The next few tests replace the "Text Last Updated" value with a
-# placeholder since git doesn't have a way to know the date that a
-# now-deleted file was last checked out locally. Internally it
-# simply reuses the Last Changed Date.
-
test_expect_success 'info deleted-file' "
(
cd gitwc &&
cd svnwc &&
svn_cmd rm --force file > /dev/null
) &&
- (cd svnwc; svn info file) |
- sed -e 's/^\(Text Last Updated:\).*/\1 TEXT-LAST-UPDATED-STRING/' \
- > expected.info-deleted-file &&
- (cd gitwc; git svn info file) |
- sed -e 's/^\(Text Last Updated:\).*/\1 TEXT-LAST-UPDATED-STRING/' \
- > actual.info-deleted-file &&
- test_cmp expected.info-deleted-file actual.info-deleted-file
+ (cd svnwc; svn info file) >expected.info-deleted-file &&
+ (cd gitwc; git svn info file) >actual.info-deleted-file &&
+ test_cmp_info expected.info-deleted-file actual.info-deleted-file
"
test_expect_success 'info --url file (deleted)' '
cd svnwc &&
svn_cmd rm --force directory > /dev/null
) &&
- (cd svnwc; svn info directory) |
- sed -e 's/^\(Text Last Updated:\).*/\1 TEXT-LAST-UPDATED-STRING/' \
- > expected.info-deleted-directory &&
- (cd gitwc; git svn info directory) |
- sed -e 's/^\(Text Last Updated:\).*/\1 TEXT-LAST-UPDATED-STRING/' \
- > actual.info-deleted-directory &&
- test_cmp expected.info-deleted-directory actual.info-deleted-directory
+ (cd svnwc; svn info directory) >expected.info-deleted-directory &&
+ (cd gitwc; git svn info directory) >actual.info-deleted-directory &&
+ test_cmp_info expected.info-deleted-directory actual.info-deleted-directory
"
test_expect_success 'info --url directory (deleted)' '
cd svnwc &&
svn_cmd rm --force symlink-file > /dev/null
) &&
- (cd svnwc; svn info symlink-file) |
- sed -e 's/^\(Text Last Updated:\).*/\1 TEXT-LAST-UPDATED-STRING/' \
- > expected.info-deleted-symlink-file &&
- (cd gitwc; git svn info symlink-file) |
- sed -e 's/^\(Text Last Updated:\).*/\1 TEXT-LAST-UPDATED-STRING/' \
- > actual.info-deleted-symlink-file &&
- test_cmp expected.info-deleted-symlink-file \
- actual.info-deleted-symlink-file
+ (cd svnwc; svn info symlink-file) >expected.info-deleted-symlink-file &&
+ (cd gitwc; git svn info symlink-file) >actual.info-deleted-symlink-file &&
+ test_cmp_info expected.info-deleted-symlink-file actual.info-deleted-symlink-file
"
test_expect_success 'info --url symlink-file (deleted)' '
cd svnwc &&
svn_cmd rm --force symlink-directory > /dev/null
) &&
- (cd svnwc; svn info symlink-directory) |
- sed -e 's/^\(Text Last Updated:\).*/\1 TEXT-LAST-UPDATED-STRING/' \
- > expected.info-deleted-symlink-directory &&
- (cd gitwc; git svn info symlink-directory) |
- sed -e 's/^\(Text Last Updated:\).*/\1 TEXT-LAST-UPDATED-STRING/' \
- > actual.info-deleted-symlink-directory &&
- test_cmp expected.info-deleted-symlink-directory \
- actual.info-deleted-symlink-directory
+ (cd svnwc; svn info symlink-directory) >expected.info-deleted-symlink-directory &&
+ (cd gitwc; git svn info symlink-directory) >actual.info-deleted-symlink-directory &&
+ test_cmp_info expected.info-deleted-symlink-directory actual.info-deleted-symlink-directory
"
test_expect_success 'info --url symlink-directory (deleted)' '
. ./test-lib.sh
. "$TEST_DIRECTORY"/diff-lib.sh ;# test-lib chdir's into trash
+# Print $1 bytes from stdin to stdout.
+#
+# This could be written as "head -c $1", but IRIX "head" does not
+# support the -c option.
+head_c () {
+ perl -e '
+ my $len = $ARGV[1];
+ while ($len > 0) {
+ my $s;
+ my $nread = sysread(STDIN, $s, $len);
+ die "cannot read: $!" unless defined($nread);
+ print $s;
+ $len -= $nread;
+ }
+ ' - "$1"
+}
+
file2_data='file2
second line of EOF'
file6_data='#!/bin/sh
echo "$@"'
+>empty
+
###
### series A
###
test_tick
+
+test_expect_success 'empty stream succeeds' '
+ git fast-import </dev/null
+'
+
cat >input <<INPUT_END
blob
mark :2
test_cmp marks.new non-relative.out
'
+test_expect_success 'R: feature cat-blob supported' '
+ echo "feature cat-blob" |
+ git fast-import
+'
+
+test_expect_success 'R: cat-blob-fd must be a nonnegative integer' '
+ test_must_fail git fast-import --cat-blob-fd=-1 </dev/null
+'
+
+test_expect_success 'R: print old blob' '
+ blob=$(echo "yes it can" | git hash-object -w --stdin) &&
+ cat >expect <<-EOF &&
+ ${blob} blob 11
+ yes it can
+
+ EOF
+ echo "cat-blob $blob" |
+ git fast-import --cat-blob-fd=6 6>actual &&
+ test_cmp expect actual
+'
+
+test_expect_success 'R: in-stream cat-blob-fd not respected' '
+ echo hello >greeting &&
+ blob=$(git hash-object -w greeting) &&
+ cat >expect <<-EOF &&
+ ${blob} blob 6
+ hello
+
+ EOF
+ git fast-import --cat-blob-fd=3 3>actual.3 >actual.1 <<-EOF &&
+ cat-blob $blob
+ EOF
+ test_cmp expect actual.3 &&
+ test_cmp empty actual.1 &&
+ git fast-import 3>actual.3 >actual.1 <<-EOF &&
+ option cat-blob-fd=3
+ cat-blob $blob
+ EOF
+ test_cmp empty actual.3 &&
+ test_cmp expect actual.1
+'
+
+test_expect_success 'R: print new blob' '
+ blob=$(echo "yep yep yep" | git hash-object --stdin) &&
+ cat >expect <<-EOF &&
+ ${blob} blob 12
+ yep yep yep
+
+ EOF
+ git fast-import --cat-blob-fd=6 6>actual <<-\EOF &&
+ blob
+ mark :1
+ data <<BLOB_END
+ yep yep yep
+ BLOB_END
+ cat-blob :1
+ EOF
+ test_cmp expect actual
+'
+
+test_expect_success 'R: print new blob by sha1' '
+ blob=$(echo "a new blob named by sha1" | git hash-object --stdin) &&
+ cat >expect <<-EOF &&
+ ${blob} blob 25
+ a new blob named by sha1
+
+ EOF
+ git fast-import --cat-blob-fd=6 6>actual <<-EOF &&
+ blob
+ data <<BLOB_END
+ a new blob named by sha1
+ BLOB_END
+ cat-blob $blob
+ EOF
+ test_cmp expect actual
+'
+
+test_expect_success 'setup: big file' '
+ (
+ echo "the quick brown fox jumps over the lazy dog" >big &&
+ for i in 1 2 3
+ do
+ cat big big big big >bigger &&
+ cat bigger bigger bigger bigger >big ||
+ exit
+ done
+ )
+'
+
+test_expect_success 'R: print two blobs to stdout' '
+ blob1=$(git hash-object big) &&
+ blob1_len=$(wc -c <big) &&
+ blob2=$(echo hello | git hash-object --stdin) &&
+ {
+ echo ${blob1} blob $blob1_len &&
+ cat big &&
+ cat <<-EOF
+
+ ${blob2} blob 6
+ hello
+
+ EOF
+ } >expect &&
+ {
+ cat <<-\END_PART1 &&
+ blob
+ mark :1
+ data <<data_end
+ END_PART1
+ cat big &&
+ cat <<-\EOF
+ data_end
+ blob
+ mark :2
+ data <<data_end
+ hello
+ data_end
+ cat-blob :1
+ cat-blob :2
+ EOF
+ } |
+ git fast-import >actual &&
+ test_cmp expect actual
+'
+
+test_expect_success 'setup: have pipes?' '
+ rm -f frob &&
+ if mkfifo frob
+ then
+ test_set_prereq PIPE
+ fi
+'
+
+test_expect_success PIPE 'R: copy using cat-file' '
+ expect_id=$(git hash-object big) &&
+ expect_len=$(wc -c <big) &&
+ echo $expect_id blob $expect_len >expect.response &&
+
+ rm -f blobs &&
+ cat >frontend <<-\FRONTEND_END &&
+ #!/bin/sh
+ FRONTEND_END
+
+ mkfifo blobs &&
+ (
+ export GIT_COMMITTER_NAME GIT_COMMITTER_EMAIL GIT_COMMITTER_DATE &&
+ cat <<-\EOF &&
+ feature cat-blob
+ blob
+ mark :1
+ data <<BLOB
+ EOF
+ cat big &&
+ cat <<-\EOF &&
+ BLOB
+ cat-blob :1
+ EOF
+
+ read blob_id type size <&3 &&
+ echo "$blob_id $type $size" >response &&
+ head_c $size >blob <&3 &&
+ read newline <&3 &&
+
+ cat <<-EOF &&
+ commit refs/heads/copied
+ committer $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> $GIT_COMMITTER_DATE
+ data <<COMMIT
+ copy big file as file3
+ COMMIT
+ M 644 inline file3
+ data <<BLOB
+ EOF
+ cat blob &&
+ echo BLOB
+ ) 3<blobs |
+ git fast-import --cat-blob-fd=3 3>blobs &&
+ git show copied:file3 >actual &&
+ test_cmp expect.response response &&
+ test_cmp big actual
+'
+
+test_expect_success PIPE 'R: print blob mid-commit' '
+ rm -f blobs &&
+ echo "A blob from _before_ the commit." >expect &&
+ mkfifo blobs &&
+ (
+ exec 3<blobs &&
+ cat <<-EOF &&
+ feature cat-blob
+ blob
+ mark :1
+ data <<BLOB
+ A blob from _before_ the commit.
+ BLOB
+ commit refs/heads/temporary
+ committer $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> $GIT_COMMITTER_DATE
+ data <<COMMIT
+ Empty commit
+ COMMIT
+ cat-blob :1
+ EOF
+
+ read blob_id type size <&3 &&
+ head_c $size >actual <&3 &&
+ read newline <&3 &&
+
+ echo
+ ) |
+ git fast-import --cat-blob-fd=3 3>blobs &&
+ test_cmp expect actual
+'
+
+test_expect_success PIPE 'R: print staged blob within commit' '
+ rm -f blobs &&
+ echo "A blob from _within_ the commit." >expect &&
+ mkfifo blobs &&
+ (
+ exec 3<blobs &&
+ cat <<-EOF &&
+ feature cat-blob
+ commit refs/heads/within
+ committer $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> $GIT_COMMITTER_DATE
+ data <<COMMIT
+ Empty commit
+ COMMIT
+ M 644 inline within
+ data <<BLOB
+ A blob from _within_ the commit.
+ BLOB
+ EOF
+
+ to_get=$(
+ echo "A blob from _within_ the commit." |
+ git hash-object --stdin
+ ) &&
+ echo "cat-blob $to_get" &&
+
+ read blob_id type size <&3 &&
+ head_c $size >actual <&3 &&
+ read newline <&3 &&
+
+ echo deleteall
+ ) |
+ git fast-import --cat-blob-fd=3 3>blobs &&
+ test_cmp expect actual
+'
+
cat >input << EOF
option git quiet
blob
EOF
-touch empty
-
test_expect_success 'R: quiet option results in no stats being output' '
cat input | git fast-import 2> output &&
test_cmp empty output
test_must_fail git fast-import --non-existing-option < /dev/null
'
+test_expect_success 'R: die on invalid option argument' '
+ echo "option git active-branches=-5" |
+ test_must_fail git fast-import &&
+ echo "option git depth=" |
+ test_must_fail git fast-import &&
+ test_must_fail git fast-import --depth="5 elephants" </dev/null
+'
+
cat >input <<EOF
option non-existing-vcs non-existing-option
EOF
usage("test-treap < ints");
while (strbuf_getline(&sb, stdin, '\n') != EOF) {
- item = node_alloc(1);
- strtonode(node_pointer(item), sb.buf);
- treap_insert(&root, node_pointer(item));
+ struct int_node *node = node_pointer(node_alloc(1));
+
+ item = node_offset(node);
+ strtonode(node, sb.buf);
+ node = treap_insert(&root, node_pointer(item));
+ if (node_offset(node) != item)
+ die("inserted %"PRIu32" in place of %"PRIu32"",
+ node_offset(node), item);
}
item = node_offset(treap_first(&root));
#include "cache.h"
#include "quote.h"
-void do_nothing(size_t unused)
-{
-}
-
/* Get a trace file descriptor from GIT_TRACE env variable. */
static int get_trace_fd(int *need_close)
{
if (!fd)
return;
- set_try_to_free_routine(do_nothing); /* is never reset */
+ set_try_to_free_routine(NULL); /* is never reset */
strbuf_init(&buf, 64);
va_start(ap, fmt);
len = vsnprintf(buf.buf, strbuf_avail(&buf), fmt, ap);
if (!fd)
return;
- set_try_to_free_routine(do_nothing); /* is never reset */
+ set_try_to_free_routine(NULL); /* is never reset */
strbuf_init(&buf, 64);
va_start(ap, fmt);
len = vsnprintf(buf.buf, strbuf_avail(&buf), fmt, ap);
struct strbuf out = STRBUF_INIT;
return url_decode_internal(query, "&", &out, 1);
}
+
+void end_url_with_slash(struct strbuf *buf, const char *url)
+{
+ strbuf_addstr(buf, url);
+ if (buf->len && buf->buf[buf->len - 1] != '/')
+ strbuf_addstr(buf, "/");
+}
+
+void str_end_url_with_slash(const char *url, char **dest) {
+ struct strbuf buf = STRBUF_INIT;
+ end_url_with_slash(&buf, url);
+ free(*dest);
+ *dest = strbuf_detach(&buf, NULL);
+}
extern char *url_decode_parameter_name(const char **query);
extern char *url_decode_parameter_value(const char **query);
+extern void end_url_with_slash(struct strbuf *buf, const char *url);
+extern void str_end_url_with_slash(const char *url, char **dest);
+
#endif /* URL_H */
"[a-zA-Z_][a-zA-Z0-9_]*"
"|[-+0-9.e]+[jJlL]?|0[xX]?[0-9a-fA-F]+[lL]?"
"|[-+*/<>%&^|=!]=|//=?|<<=?|>>=?|\\*\\*=?"
- "|[^[:space:]|[\x80-\xff]+"),
+ "|[^[:space:]]|[\x80-\xff]+"),
/* -- */
PATTERNS("ruby", "^[ \t]*((class|module|def)[ \t].*)$",
/* -- */
"(@|@@|\\$)?[a-zA-Z_][a-zA-Z0-9_]*"
"|[-+0-9.e]+|0[xXbB]?[0-9a-fA-F]+|\\?(\\\\C-)?(\\\\M-)?."
"|//=?|[-+*/<>%&^|=!]=|<<=?|>>=?|===|\\.{1,3}|::|[!=]~"
- "|[^[:space:]|[\x80-\xff]+"),
+ "|[^[:space:]]|[\x80-\xff]+"),
PATTERNS("bibtex", "(@[a-zA-Z]{1,}[ \t]*\\{{0,1}[ \t]*[^ \t\"@',\\#}{~%]*).*$",
"[={}\"]|[^={}\" \t]+"),
PATTERNS("tex", "^(\\\\((sub)*section|chapter|part)\\*{0,1}\\{.*)$",
if (dent == key) {
dent->mode = REPO_MODE_DIR;
dent->content_offset = 0;
- dent_insert(&dir->entries, dent);
+ dent = dent_insert(&dir->entries, dent);
}
if (dent_offset(dent) < dent_pool.committed) {
dent->name_offset = name;
dent->mode = REPO_MODE_DIR;
dent->content_offset = dir_o;
- dent_insert(&dir->entries, dent);
+ dent = dent_insert(&dir->entries, dent);
}
dir = repo_dir_from_dirent(dent);
return ret; \
} \
} \
-a_attr void MAYBE_UNUSED a_pre##insert(struct trp_root *treap, a_type *node) \
+a_attr a_type *MAYBE_UNUSED a_pre##insert(struct trp_root *treap, a_type *node) \
{ \
uint32_t offset = trpn_offset(a_base, node); \
trp_node_new(a_base, a_field, offset); \
treap->trp_root = a_pre##insert_recurse(treap->trp_root, offset); \
+ return trpn_pointer(a_base, offset); \
} \
a_attr uint32_t MAYBE_UNUSED a_pre##remove_recurse(uint32_t cur_node, uint32_t rem_node) \
{ \
. Allocates a `struct trp_root` variable and sets it to {~0}.
-. Adds new nodes to the set using `foo_insert`.
+. Adds new nodes to the set using `foo_insert`. Any pointers
+ to existing nodes cannot be relied upon any more, so the caller
+ might retrieve them anew with `foo_pointer`.
. Can find a specific item in the set using `foo_search`.
and returning a value less than, equal to, or greater than zero
according to the result of comparison.
-void foo_insert(struct trp_root *treap, node_type \*node)::
+node_type {asterisk}foo_insert(struct trp_root *treap, node_type \*node)::
Insert node into treap. If inserted multiple times,
a node will appear in the treap multiple times.
++
+The return value is the address of the node within the treap,
+which might differ from `node` if `pool_alloc` had to call
+`realloc` to expand the pool.
void foo_remove(struct trp_root *treap, node_type \*node)::
try_to_free_t set_try_to_free_routine(try_to_free_t routine)
{
try_to_free_t old = try_to_free_routine;
+ if (!routine)
+ routine = do_nothing;
try_to_free_routine = routine;
return old;
}
rule |= whitespace_rule_names[i].rule_bits;
break;
}
+ if (strncmp(string, "tabwidth=", 9) == 0) {
+ unsigned tabwidth = atoi(string + 9);
+ if (0 < tabwidth && tabwidth < 0100) {
+ rule &= ~WS_TAB_WIDTH_MASK;
+ rule |= tabwidth;
+ }
+ else
+ warning("tabwidth %.*s out of range",
+ (int)(len - 9), string + 9);
+ }
string = ep;
}
value = attr_whitespace_rule.value;
if (ATTR_TRUE(value)) {
/* true (whitespace) */
- unsigned all_rule = 0;
+ unsigned all_rule = ws_tab_width(whitespace_rule_cfg);
int i;
for (i = 0; i < ARRAY_SIZE(whitespace_rule_names); i++)
if (!whitespace_rule_names[i].loosens_error &&
return all_rule;
} else if (ATTR_FALSE(value)) {
/* false (-whitespace) */
- return 0;
+ return ws_tab_width(whitespace_rule_cfg);
} else if (ATTR_UNSET(value)) {
/* reset to default (!whitespace) */
return whitespace_rule_cfg;
}
/* Check for indent using non-tab. */
- if ((ws_rule & WS_INDENT_WITH_NON_TAB) && i - written >= 8) {
+ if ((ws_rule & WS_INDENT_WITH_NON_TAB) && i - written >= ws_tab_width(ws_rule)) {
result |= WS_INDENT_WITH_NON_TAB;
if (stream) {
fputs(ws, stream);
} else if (ch == ' ') {
last_space_in_indent = i;
if ((ws_rule & WS_INDENT_WITH_NON_TAB) &&
- 8 <= i - last_tab_in_indent)
+ ws_tab_width(ws_rule) <= i - last_tab_in_indent)
need_fix_leading_space = 1;
} else
break;
strbuf_addch(dst, ch);
} else {
consecutive_spaces++;
- if (consecutive_spaces == 8) {
+ if (consecutive_spaces == ws_tab_width(ws_rule)) {
strbuf_addch(dst, '\t');
consecutive_spaces = 0;
}
fixed = 1;
} else if ((ws_rule & WS_TAB_IN_INDENT) && last_tab_in_indent >= 0) {
/* Expand tabs into spaces */
+ int start = dst->len;
int last = last_tab_in_indent + 1;
for (i = 0; i < last; i++) {
if (src[i] == '\t')
do {
strbuf_addch(dst, ' ');
- } while (dst->len % 8);
+ } while ((dst->len - start) % ws_tab_width(ws_rule));
else
strbuf_addch(dst, src[i]);
}
GIT_COLOR_RED, /* WT_STATUS_UNMERGED */
GIT_COLOR_GREEN, /* WT_STATUS_LOCAL_BRANCH */
GIT_COLOR_RED, /* WT_STATUS_REMOTE_BRANCH */
+ GIT_COLOR_NIL, /* WT_STATUS_ONBRANCH */
};
static const char *color(int slot, struct wt_status *s)
{
- return s->use_color > 0 ? s->color_palette[slot] : "";
+ const char *c = s->use_color > 0 ? s->color_palette[slot] : "";
+ if (slot == WT_STATUS_ONBRANCH && color_is_nil(c))
+ c = s->color_palette[WT_STATUS_HEADER];
+ return c;
}
void wt_status_prepare(struct wt_status *s)
void wt_status_print(struct wt_status *s)
{
- const char *branch_color = color(WT_STATUS_HEADER, s);
+ const char *branch_color = color(WT_STATUS_ONBRANCH, s);
+ const char *branch_status_color = color(WT_STATUS_HEADER, s);
if (s->branch) {
const char *on_what = "On branch ";
branch_name += 11;
else if (!strcmp(branch_name, "HEAD")) {
branch_name = "";
- branch_color = color(WT_STATUS_NOBRANCH, s);
+ branch_status_color = color(WT_STATUS_NOBRANCH, s);
on_what = "Not currently on any branch.";
}
color_fprintf(s->fp, color(WT_STATUS_HEADER, s), "# ");
- color_fprintf_ln(s->fp, branch_color, "%s%s", on_what, branch_name);
+ color_fprintf(s->fp, branch_status_color, "%s", on_what);
+ color_fprintf_ln(s->fp, branch_color, "%s", branch_name);
if (!s->is_initial)
wt_status_print_tracking(s);
}
WT_STATUS_NOBRANCH,
WT_STATUS_UNMERGED,
WT_STATUS_LOCAL_BRANCH,
- WT_STATUS_REMOTE_BRANCH
+ WT_STATUS_REMOTE_BRANCH,
+ WT_STATUS_ONBRANCH,
+ WT_STATUS_MAXSLOT
};
enum untracked_status_type {
int show_ignored_files;
enum untracked_status_type show_untracked_files;
const char *ignore_submodule_arg;
- char color_palette[WT_STATUS_REMOTE_BRANCH+1][COLOR_MAXLEN];
+ char color_palette[WT_STATUS_MAXSLOT][COLOR_MAXLEN];
/* These are computed during processing of the individual sections */
int commitable;