Previously the switching branch business of 'git checkout' becomes a
new command 'switch'. This adds the restore command for the checking
out paths path.
Similar to git-switch, a new man page is added to describe what the
command will become. The implementation will be updated shortly to
match the man page.
A couple main differences from 'git checkout <paths>':
- 'restore' by default will only update worktree. This matters more
when --source is specified ('checkout <tree> <paths>' updates both
worktree and index).
- 'restore --staged' can be used to restore the index. This command
overlaps with 'git reset <paths>'.
- both worktree and index could also be restored at the same time
(from a tree) when both --staged and --worktree are specified. This
overlaps with 'git checkout <tree> <paths>'
- default source for restoring worktree and index is the index and
HEAD respectively. A different (tree) source could be specified as
with --source (*).
- when both index and worktree are restored, --source must be
specified since the default source for these two individual targets
are different (**)
- --no-overlay is enabled by default, if an entry is missing in the
source, restoring means deleting the entry
(*) I originally went with --from instead of --source. I still think
--from is a better name. The short option -f however is already
taken by force. And I do think short option is good to have, e.g. to
write -s@ or -s@^ instead of --source=HEAD.
(**) If you sit down and think about it, moving worktree's source from
the index to HEAD makes sense, but nobody is really thinking it
through when they type the commands.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
/git-request-pull
/git-rerere
/git-reset
+/git-restore
/git-rev-list
/git-rev-parse
/git-revert
In interactive commands, allow the user to provide one-letter
input with a single key (i.e., without hitting enter).
Currently this is used by the `--patch` mode of
- linkgit:git-add[1], linkgit:git-checkout[1], linkgit:git-commit[1],
+ linkgit:git-add[1], linkgit:git-checkout[1],
+ linkgit:git-restore[1], linkgit:git-commit[1],
linkgit:git-reset[1], and linkgit:git-stash[1]. Note that this
setting is silently ignored if portable keystroke input
is not available; requires the Perl module Term::ReadKey.
SEE ALSO
--------
-linkgit:git-switch[1]
+linkgit:git-switch[1],
+linkgit:git-restore[1]
GIT
---
the current branch.)
+
This means that `git reset <paths>` is the opposite of `git add
-<paths>`.
+<paths>`. This command is equivalent to
+`git restore [--source=<tree-ish>] --staged <paths>...`.
+
After running `git reset <paths>` to update the index entry, you can
use linkgit:git-checkout[1] to check the contents out of the index to
changes, reset is aborted.
--
-If you want to undo a commit other than the latest on a branch,
-linkgit:git-revert[1] is your friend.
+See "Reset, restore and revert" in linkgit:git[1] for the differences
+between the three commands.
OPTIONS
--- /dev/null
+git-restore(1)
+==============
+
+NAME
+----
+git-restore - Restore working tree files
+
+SYNOPSIS
+--------
+[verse]
+'git restore' [<options>] [--source=<tree>] [--staged] [--worktree] <pathspec>...
+'git restore' (-p|--patch) [<options>] [--source=<tree>] [--staged] [--worktree] [<pathspec>...]
+
+DESCRIPTION
+-----------
+Restore specified paths in the working tree with some contents from a
+restore source. If a path is tracked but does not exist in the restore
+source, it will be removed to match the source.
+
+The command can also be used to restore the content in the index with
+`--staged`, or restore both the working tree and the index with
+`--staged --worktree`.
+
+By default, the restore sources for working tree and the index are the
+index and `HEAD` respectively. `--source` could be used to specify a
+commit as the restore source.
+
+See "Reset, restore and revert" in linkgit:git[1] for the differences
+between the three commands.
+
+OPTIONS
+-------
+-s <tree>::
+--source=<tree>::
+ Restore the working tree files with the content from the given
+ tree. It is common to specify the source tree by naming a
+ commit, branch or tag associated with it.
++
+If not specified, the default restore source for the working tree is
+the index, and the default restore source for the index index is
+`HEAD`. When both `--staged` and `--worktree` are specified,
+`--source` must also be specified.
+
+-p::
+--patch::
+ Interactively select hunks in the difference between the
+ restore source and the restore location. See the ``Interactive
+ Mode'' section of linkgit:git-add[1] to learn how to operate
+ the `--patch` mode.
++
+Note that `--patch` can accept no pathspec and will prompt to restore
+all modified paths.
+
+-W::
+--worktree::
+-S::
+--staged::
+ Specify the restore location. If neither option is specified,
+ by default the working tree is restored. Specifying `--staged`
+ will only restore the index. Specifying both restores both.
+
+-q::
+--quiet::
+ Quiet, suppress feedback messages. Implies `--no-progress`.
+
+--progress::
+--no-progress::
+ Progress status is reported on the standard error stream
+ by default when it is attached to a terminal, unless `--quiet`
+ is specified. This flag enables progress reporting even if not
+ attached to a terminal, regardless of `--quiet`.
+
+--ours::
+--theirs::
+ When restoring files in the working tree from the index, use
+ stage #2 ('ours') or #3 ('theirs') for unmerged paths.
++
+Note that during `git rebase` and `git pull --rebase`, 'ours' and
+'theirs' may appear swapped. See the explanation of the same options
+in linkgit:git-checkout[1] for details.
+
+-m::
+--merge::
+ When restoring files on the working tree from the index,
+ recreate the conflicted merge in the unmerged paths.
+
+--conflict=<style>::
+ The same as `--merge` option above, but changes the way the
+ conflicting hunks are presented, overriding the
+ `merge.conflictStyle` configuration variable. Possible values
+ are "merge" (default) and "diff3" (in addition to what is
+ shown by "merge" style, shows the original contents).
+
+--ignore-unmerged::
+ When restoring files on the working tree from the index, do
+ not abort the operation if there are unmerged entries and
+ neither `--ours`, `--theirs`, `--merge` or `--conflict` is
+ specified. Unmerged paths on the working tree are left alone.
+
+--ignore-skip-worktree-bits::
+ In sparse checkout mode, by default is to only update entries
+ matched by `<pathspec>` and sparse patterns in
+ $GIT_DIR/info/sparse-checkout. This option ignores the sparse
+ patterns and unconditionally restores any files in
+ `<pathspec>`.
+
+--overlay::
+--no-overlay::
+ In overlay mode, the command never removes files when
+ restoring. In no-overlay mode, tracked files that do not
+ appear in the `--source` tree are removed, to make them match
+ `<tree>` exactly. The default is no-overlay mode.
+
+EXAMPLES
+--------
+
+The following sequence switches to the `master` branch, reverts the
+`Makefile` to two revisions back, deletes hello.c by mistake, and gets
+it back from the index.
+
+------------
+$ git switch master
+$ git restore --source master~2 Makefile <1>
+$ rm -f hello.c
+$ git restore hello.c <2>
+------------
+
+<1> take a file out of another commit
+<2> restore hello.c from the index
+
+If you want to restore _all_ C source files to match the version in
+the index, you can say
+
+------------
+$ git restore '*.c'
+------------
+
+Note the quotes around `*.c`. The file `hello.c` will also be
+restored, even though it is no longer in the working tree, because the
+file globbing is used to match entries in the index (not in the
+working tree by the shell).
+
+To restore all files in the current directory
+
+------------
+$ git restore .
+------------
+
+or to restore all working tree files with 'top' pathspec magic (see
+linkgit:gitglossary[7])
+
+------------
+$ git restore :/
+------------
+
+To restore a file in the index to match the version in `HEAD` (this is
+the same as using linkgit:git-reset[1])
+
+------------
+$ git restore --staged hello.c
+------------
+
+or you can restore both the index and the working tree (this the same
+as using linkgit:git-checkout[1])
+
+------------
+$ git restore --source=HEAD --staged --worktree hello.c
+------------
+
+or the short form which is more practical but less readable:
+
+------------
+$ git restore -s@ -SW hello.c
+------------
+
+SEE ALSO
+--------
+linkgit:git-checkout[1],
+linkgit:git-reset[1]
+
+GIT
+---
+Part of the linkgit:git[1] suite
<commit> -- <filename>` syntax. Take care with these alternatives as
both will discard uncommitted changes in your working directory.
+See "Reset, restore and revert" in linkgit:git[1] for the differences
+between the three commands.
+
OPTIONS
-------
<commit>...::
include::cmds-foreignscminterface.txt[]
+Reset, restore and revert
+~~~~~~~~~~~~~~~~~~~~~~~~~
+There are three commands with similar names: `git reset`,
+`git restore` and `git revert`.
+
+* linkgit:git-revert[1] is about making a new commit that reverts the
+ changes made by other commits.
+
+* linkgit:git-restore[1] is about restoring files in the working tree
+ from either the index or another commit. This command does not
+ update your branch. The command can also be used to restore files in
+ the index from another commit.
+
+* linkgit:git-reset[1] is about updating your branch, moving the tip
+ in order to add or remove commits from the branch. This operation
+ changes the commit history.
++
+`git reset` can also be used to restore the index, overlapping with
+`git restore`.
+
Low-level commands (plumbing)
-----------------------------
http://marc.info/?l=git&m=119150393620273 for further
information.
+Some other commands that also work on files in the working tree and/or
+in the index can take `--staged` and/or `--worktree`.
+
+* `--staged` is exactly like `--cached`, which is used to ask a
+ command to only work on the index, not the working tree.
+
+* `--worktree` is the opposite, to ask a command to work on the
+ working tree only, not the index.
+
+* The two options can be specified together to ask a command to work
+ on both the index and the working tree.
+
GIT
---
Part of the linkgit:git[1] suite
BUILT_INS += git-fsck-objects$X
BUILT_INS += git-init$X
BUILT_INS += git-merge-subtree$X
+BUILT_INS += git-restore$X
BUILT_INS += git-show$X
BUILT_INS += git-stage$X
BUILT_INS += git-status$X
extern int cmd_repack(int argc, const char **argv, const char *prefix);
extern int cmd_rerere(int argc, const char **argv, const char *prefix);
extern int cmd_reset(int argc, const char **argv, const char *prefix);
+extern int cmd_restore(int argc, const char **argv, const char *prefix);
extern int cmd_rev_list(int argc, const char **argv, const char *prefix);
extern int cmd_rev_parse(int argc, const char **argv, const char *prefix);
extern int cmd_revert(int argc, const char **argv, const char *prefix);
NULL,
};
+static const char * const restore_usage[] = {
+ N_("git restore [<options>] [<branch>] -- <file>..."),
+ NULL,
+};
+
struct checkout_opts {
int patch_mode;
int quiet;
FREE_AND_NULL(options);
return ret;
}
+
+int cmd_restore(int argc, const char **argv, const char *prefix)
+{
+ struct checkout_opts opts;
+ struct option *options = NULL;
+ int ret;
+
+ memset(&opts, 0, sizeof(opts));
+ opts.dwim_new_local_branch = 1;
+ opts.switch_branch_doing_nothing_is_ok = 0;
+ opts.accept_pathspec = 1;
+
+ options = parse_options_dup(options);
+ options = add_common_options(&opts, options);
+ options = add_checkout_path_options(&opts, options);
+
+ ret = checkout_main(argc, argv, prefix, &opts,
+ options, restore_usage);
+ FREE_AND_NULL(options);
+ return ret;
+}
git-request-pull foreignscminterface complete
git-rerere ancillaryinterrogators
git-reset mainporcelain worktree
+git-restore mainporcelain worktree
git-revert mainporcelain
git-rev-list plumbinginterrogators
git-rev-parse plumbinginterrogators
{ "replace", cmd_replace, RUN_SETUP },
{ "rerere", cmd_rerere, RUN_SETUP },
{ "reset", cmd_reset, RUN_SETUP },
+ { "restore", cmd_restore, RUN_SETUP | NEED_WORK_TREE },
{ "rev-list", cmd_rev_list, RUN_SETUP | NO_PARSEOPT },
{ "rev-parse", cmd_rev_parse, NO_PARSEOPT },
{ "revert", cmd_revert, RUN_SETUP | NEED_WORK_TREE },