Includes
~~~~~~~~
-You can include one config file from another by setting the special
-`include.path` variable to the name of the file to be included. The
-variable takes a pathname as its value, and is subject to tilde
-expansion.
+The `include` and `includeIf` sections allow you to include config
+directives from another source. These sections behave identically to
+each other with the exception that `includeIf` sections may be ignored
+if their condition does not evaluate to true; see "Conditional includes"
+below.
-The
-included file is expanded immediately, as if its contents had been
-found at the location of the include directive. If the value of the
-`include.path` variable is a relative path, the path is considered to be
-relative to the configuration file in which the include directive was
-found. See below for examples.
+You can include a config file from another by setting the special
+`include.path` (or `includeIf.*.path`) variable to the name of the file
+to be included. The variable takes a pathname as its value, and is
+subject to tilde expansion. These variables can be given multiple times.
+The contents of the included file are inserted immediately, as if they
+had been found at the location of the include directive. If the value of the
+variable is a relative path, the path is considered to
+be relative to the configuration file in which the include directive
+was found. See below for examples.
+
+Conditional includes
+~~~~~~~~~~~~~~~~~~~~
+
+You can include a config file from another conditionally by setting a
+`includeIf.<condition>.path` variable to the name of the file to be
+included.
+
+The condition starts with a keyword followed by a colon and some data
+whose format and meaning depends on the keyword. Supported keywords
+are:
+
+`gitdir`::
+
+ The data that follows the keyword `gitdir:` is used as a glob
+ pattern. If the location of the .git directory matches the
+ pattern, the include condition is met.
++
+The .git location may be auto-discovered, or come from `$GIT_DIR`
+environment variable. If the repository is auto discovered via a .git
+file (e.g. from submodules, or a linked worktree), the .git location
+would be the final location where the .git directory is, not where the
+.git file is.
++
+The pattern can contain standard globbing wildcards and two additional
+ones, `**/` and `/**`, that can match multiple path components. Please
+refer to linkgit:gitignore[5] for details. For convenience:
+
+ * If the pattern starts with `~/`, `~` will be substituted with the
+ content of the environment variable `HOME`.
+
+ * If the pattern starts with `./`, it is replaced with the directory
+ containing the current config file.
+
+ * If the pattern does not start with either `~/`, `./` or `/`, `**/`
+ will be automatically prepended. For example, the pattern `foo/bar`
+ becomes `**/foo/bar` and would match `/any/path/to/foo/bar`.
+
+ * If the pattern ends with `/`, `**` will be automatically added. For
+ example, the pattern `foo/` becomes `foo/**`. In other words, it
+ matches "foo" and everything inside, recursively.
+
+`gitdir/i`::
+ This is the same as `gitdir` except that matching is done
+ case-insensitively (e.g. on case-insensitive file sytems)
+
+A few more notes on matching via `gitdir` and `gitdir/i`:
+
+ * Symlinks in `$GIT_DIR` are not resolved before matching.
+
+ * Both the symlink & realpath versions of paths will be matched
+ outside of `$GIT_DIR`. E.g. if ~/git is a symlink to
+ /mnt/storage/git, both `gitdir:~/git` and `gitdir:/mnt/storage/git`
+ will match.
++
+This was not the case in the initial release of this feature in
+v2.13.0, which only matched the realpath version. Configuration that
+wants to be compatible with the initial release of this feature needs
+to either specify only the realpath version, or both versions.
+
+ * Note that "../" is not special and will match literally, which is
+ unlikely what you want.
Example
~~~~~~~
[include]
path = /path/to/foo.inc ; include by absolute path
- path = foo ; expand "foo" relative to the current file
- path = ~/foo ; expand "foo" in your `$HOME` directory
+ path = foo.inc ; find "foo.inc" relative to the current file
+ path = ~/foo.inc ; find "foo.inc" in your `$HOME` directory
+
+ ; include if $GIT_DIR is /path/to/foo/.git
+ [includeIf "gitdir:/path/to/foo/.git"]
+ path = /path/to/foo.inc
+ ; include for all repositories inside /path/to/group
+ [includeIf "gitdir:/path/to/group/"]
+ path = /path/to/foo.inc
+
+ ; include for all repositories inside $HOME/to/group
+ [includeIf "gitdir:~/to/group/"]
+ path = /path/to/foo.inc
+
+ ; relative paths are always relative to the including
+ ; file (if the condition is true); their location is not
+ ; affected by the condition
+ [includeIf "gitdir:/path/to/group/"]
+ path = foo.inc
Values
~~~~~~
synonyms are accepted for 'true' and 'false'; these are all
case-insensitive.
- true;; Boolean true can be spelled as `yes`, `on`, `true`,
- or `1`. Also, a variable defined without `= <value>`
+ true;; Boolean true literals are `yes`, `on`, `true`,
+ and `1`. Also, a variable defined without `= <value>`
is taken as true.
- false;; Boolean false can be spelled as `no`, `off`,
- `false`, or `0`.
+ false;; Boolean false literals are `no`, `off`, `false`,
+ `0` and the empty string.
+
When converting value to the canonical form using `--bool` type
-specifier; 'git config' will ensure that the output is "true" or
+specifier, 'git config' will ensure that the output is "true" or
"false" (spelled in lowercase).
integer::
be turned off by prefixing them with `no` or `no-` (e.g., `noreverse`,
`no-ul`, etc).
+
+An empty color string produces no color effect at all. This can be used
+to avoid coloring specific elements without disabling color entirely.
++
For git's pre-defined color slots, the attributes are meant to be reset
at the beginning of each item in the colored output. So setting
`color.decorate.branch` to `black` will paint that branch name in a
rmHints::
In case of failure in the output of linkgit:git-rm[1],
show directions on how to proceed from the current state.
+ addEmbeddedRepo::
+ Advice on what to do when you've accidentally added one
+ git repo inside of another.
+ ignoredHook::
+ Advice shown if an hook is ignored because the hook is not
+ set as executable.
+ waitingForEditor::
+ Print a message to the terminal whenever Git is waiting for
+ editor input from the user.
--
core.fileMode::
is to be honored.
+
Some filesystems lose the executable bit when a file that is
-marked as executable is checked out, or checks out an
+marked as executable is checked out, or checks out a
non-executable file with executable bit on.
linkgit:git-clone[1] or linkgit:git-init[1] probe the filesystem
to see if it handles the executable bit correctly
8.3 "short" names.
Defaults to `true` on Windows, and `false` elsewhere.
+core.fsmonitor::
+ If set, the value of this variable is used as a command which
+ will identify all files that may have changed since the
+ requested date/time. This information is used to speed up git by
+ avoiding unnecessary processing of files that have not changed.
+ See the "fsmonitor-watchman" section of linkgit:githooks[5].
+
core.trustctime::
If false, the ctime differences between the index and the
working tree are ignored; useful when the inode change time
crawlers and some backup systems).
See linkgit:git-update-index[1]. True by default.
+core.splitIndex::
+ If true, the split-index feature of the index will be used.
+ See linkgit:git-update-index[1]. False by default.
+
core.untrackedCache::
Determines what to do about the untracked cache feature of the
index. It will be kept, if this variable is unset or set to
all fields, including the sub-second part of mtime and ctime.
core.quotePath::
- The commands that output paths (e.g. 'ls-files',
- 'diff'), when not given the `-z` option, will quote
- "unusual" characters in the pathname by enclosing the
- pathname in a double-quote pair and with backslashes the
- same way strings in C source code are quoted. If this
- variable is set to false, the bytes higher than 0x80 are
- not quoted but output as verbatim. Note that double
- quote, backslash and control characters are always
- quoted without `-z` regardless of the setting of this
- variable.
+ Commands that output paths (e.g. 'ls-files', 'diff'), will
+ quote "unusual" characters in the pathname by enclosing the
+ pathname in double-quotes and escaping those characters with
+ backslashes in the same way C escapes control characters (e.g.
+ `\t` for TAB, `\n` for LF, `\\` for backslash) or bytes with
+ values larger than 0x80 (e.g. octal `\302\265` for "micro" in
+ UTF-8). If this variable is set to false, bytes higher than
+ 0x80 are not considered "unusual" any more. Double-quotes,
+ backslash and control characters are always escaped regardless
+ of the setting of this variable. A simple space character is
+ not considered "unusual". Many commands can output pathnames
+ completely verbatim using the `-z` option. The default value
+ is true.
core.eol::
Sets the line ending type to use in the working directory for
"`$GIT_DIR/logs/<ref>`", by appending the new and old
SHA-1, the date/time and the reason of the update, but
only when the file exists. If this configuration
- variable is set to true, missing "`$GIT_DIR/logs/<ref>`"
+ variable is set to `true`, missing "`$GIT_DIR/logs/<ref>`"
file is automatically created for branch heads (i.e. under
- refs/heads/), remote refs (i.e. under refs/remotes/),
- note refs (i.e. under refs/notes/), and the symbolic ref HEAD.
+ `refs/heads/`), remote refs (i.e. under `refs/remotes/`),
+ note refs (i.e. under `refs/notes/`), and the symbolic ref `HEAD`.
+ If it is set to `always`, then a missing reflog is automatically
+ created for any ref under `refs/`.
+
This information can be used to determine what commit
was the tip of a branch "2 days ago".
bytes at once to complete an operation it will unmap existing
regions to reclaim virtual address space within the process.
+
-Default is 256 MiB on 32 bit platforms and 8 GiB on 64 bit platforms.
+Default is 256 MiB on 32 bit platforms and 32 TiB (effectively
+unlimited) on 64 bit platforms.
This should be reasonable for all users/operating systems, except on
the largest projects. You probably do not need to adjust this value.
+
default hooks.
core.editor::
- Commands such as `commit` and `tag` that lets you edit
- messages by launching an editor uses the value of this
+ Commands such as `commit` and `tag` that let you edit
+ messages by launching an editor use the value of this
variable when it is set, and the environment variable
`GIT_EDITOR` is not set. See linkgit:git-var[1].
core.commentChar::
- Commands such as `commit` and `tag` that lets you edit
+ Commands such as `commit` and `tag` that let you edit
messages consider a line that begins with this character
commented, and removes them after the editor returns
(default '#').
If set to "auto", `git-commit` would select a character that is not
the beginning character of any line in existing commit messages.
+core.filesRefLockTimeout::
+ The length of time, in milliseconds, to retry when trying to
+ lock an individual reference. Value 0 means not to retry at
+ all; -1 means to try indefinitely. Default is 100 (i.e.,
+ retry for 100ms).
+
core.packedRefsTimeout::
The length of time, in milliseconds, to retry when trying to
lock the `packed-refs` file. Value 0 means not to retry at
linkgit:git-read-tree[1] for more information.
core.abbrev::
- Set the length object names are abbreviated to. If unspecified,
- many commands abbreviate to 7 hexdigits, which may not be enough
- for abbreviated object names to stay unique for sufficiently long
- time.
+ Set the length object names are abbreviated to. If
+ unspecified or set to "auto", an appropriate value is
+ computed based on the approximate number of packed objects
+ in your repository, which hopefully is enough for
+ abbreviated object names to stay unique for some time.
+ The minimum length is 4.
add.ignoreErrors::
add.ignore-errors (deprecated)::
Tells 'git apply' how to handle whitespaces, in the same way
as the `--whitespace` option. See linkgit:git-apply[1].
+blame.showRoot::
+ Do not treat root commits as boundaries in linkgit:git-blame[1].
+ This option defaults to false.
+
+blame.blankBoundary::
+ Show blank commit object name for boundary commits in
+ linkgit:git-blame[1]. This option defaults to false.
+
+blame.showEmail::
+ Show the author email instead of author name in linkgit:git-blame[1].
+ This option defaults to false.
+
+blame.date::
+ Specifies the format used to output dates in linkgit:git-blame[1].
+ If unset the iso format is used. For supported values,
+ see the discussion of the `--date` option at linkgit:git-log[1].
+
branch.autoSetupMerge::
Tells 'git branch' and 'git checkout' to set up new branches
so that linkgit:git-pull[1] will appropriately merge from the
'git-diff-{asterisk}' plumbing commands. Can be overridden on the
command line with the `--color[=<when>]` option.
+diff.colorMoved::
+ If set to either a valid `<mode>` or a true value, moved lines
+ in a diff are colored differently, for details of valid modes
+ see '--color-moved' in linkgit:git-diff[1]. If simply set to
+ true the default color mode will be used. When set to false,
+ moved lines are not colored.
+
color.diff.<slot>::
Use customized color for diff colorization. `<slot>` specifies
which part of the patch to use the specified color, and is one
of `context` (context text - `plain` is a historical synonym),
`meta` (metainformation), `frag`
(hunk header), 'func' (function in hunk header), `old` (removed lines),
- `new` (added lines), `commit` (commit headers), or `whitespace`
- (highlighting whitespace errors).
+ `new` (added lines), `commit` (commit headers), `whitespace`
+ (highlighting whitespace errors), `oldMoved` (deleted lines),
+ `newMoved` (added lines), `oldMovedDimmed`, `oldMovedAlternative`,
+ `oldMovedAlternativeDimmed`, `newMovedDimmed`, `newMovedAlternative`
+ and `newMovedAlternativeDimmed` (See the '<mode>'
+ setting of '--color-moved' in linkgit:git-diff[1] for details).
color.decorate.<slot>::
Use customized color for 'git log --decorate' output. `<slot>` is one
`untracked` (files which are not tracked by Git),
`branch` (the current branch),
`nobranch` (the color the 'no branch' warning is shown in, defaulting
- to red), or
+ to red),
+ `localBranch` or `remoteBranch` (the local and remote branch names,
+ respectively, when branch and tracking information is displayed in the
+ status short-format), or
`unmerged` (files which have unmerged changes).
color.ui::
Make `git gc --auto` return immediately and run in background
if the system supports it. Default is true.
+gc.logExpiry::
+ If the file gc.log exists, then `git gc --auto` won't run
+ unless that file is more than 'gc.logExpiry' old. Default is
+ "1.day". See `gc.pruneExpire` for more ways to specify its
+ value.
+
gc.packRefs::
Running `git pack-refs` in a repository renders it
unclonable by Git versions prior to 1.5.1.2 over dumb
Override the grace period with this config variable. The value
"now" may be used to disable this grace period and always prune
unreachable objects immediately, or "never" may be used to
- suppress pruning.
+ suppress pruning. This feature helps prevent corruption when
+ 'git gc' runs concurrently with another process writing to the
+ repository; see the "NOTES" section of linkgit:git-gc[1].
gc.worktreePruneExpire::
When 'git gc' is run, it calls
gc.rerereResolved::
Records of conflicted merge you resolved earlier are
kept for this many days when 'git rerere gc' is run.
+ You can also use more human-readable "1.month.ago", etc.
The default is 60 days. See linkgit:git-rerere[1].
gc.rerereUnresolved::
Records of conflicted merge you have not resolved are
kept for this many days when 'git rerere gc' is run.
+ You can also use more human-readable "1.month.ago", etc.
The default is 15 days. See linkgit:git-rerere[1].
gitcvs.commitMsgAnnotation::
a username in the URL, as libcurl normally requires a username for
authentication.
+http.delegation::
+ Control GSSAPI credential delegation. The delegation is disabled
+ by default in libcurl since version 7.21.7. Set parameter to tell
+ the server what it is allowed to delegate when it comes to user
+ credentials. Used with GSS/kerberos. Possible values are:
++
+--
+* `none` - Don't allow any delegation.
+* `policy` - Delegates if and only if the OK-AS-DELEGATE flag is set in the
+ Kerberos service ticket, which is a matter of realm policy.
+* `always` - Unconditionally allow the server to delegate.
+--
+
+
http.extraHeader::
Pass an additional HTTP header when communicating with a server. If
more than one such entry exists, all of them are added as extra
http.sslVerify::
Whether to verify the SSL certificate when fetching or pushing
- over HTTPS. Can be overridden by the `GIT_SSL_NO_VERIFY` environment
- variable.
+ over HTTPS. Defaults to true. Can be overridden by the
+ `GIT_SSL_NO_VERIFY` environment variable.
http.sslCert::
File containing the SSL certificate when fetching or pushing
of common USER_AGENT strings (but not including those like git/1.7.1).
Can be overridden by the `GIT_HTTP_USER_AGENT` environment variable.
+http.followRedirects::
+ Whether git should follow HTTP redirects. If set to `true`, git
+ will transparently follow any redirect issued by a server it
+ encounters. If set to `false`, git will treat all redirects as
+ errors. If set to `initial`, git will follow redirects only for
+ the initial request to a remote, but not for subsequent
+ follow-up HTTP requests. Since git uses the redirected URL as
+ the base for the follow-up requests, this is generally
+ sufficient. The default is `initial`.
+
http.<url>.*::
Any of the http.* options above can be applied selectively to some URLs.
For a config key to match a URL, each element of the config key is
must match exactly between the config key and the URL.
. Host/domain name (e.g., `example.com` in `https://example.com/`).
- This field must match exactly between the config key and the URL.
+ This field must match between the config key and the URL. It is
+ possible to specify a `*` as part of the host name to match all subdomains
+ at this level. `https://*.example.com/` for example would match
+ `https://foo.example.com/`, but not `https://foo.bar.example.com/`.
. Port number (e.g., `8080` in `http://example.com:8080/`).
This field must match exactly between the config key and the URL.
matched against are those given directly to Git commands. This means any URLs
visited as a result of a redirection do not participate in matching.
+ssh.variant::
+ By default, Git determines the command line arguments to use
+ based on the basename of the configured SSH command (configured
+ using the environment variable `GIT_SSH` or `GIT_SSH_COMMAND` or
+ the config setting `core.sshCommand`). If the basename is
+ unrecognized, Git will attempt to detect support of OpenSSH
+ options by first invoking the configured SSH command with the
+ `-G` (print configuration) option and will subsequently use
+ OpenSSH options (if that is successful) or no options besides
+ the host and remote command (if it fails).
++
+The config variable `ssh.variant` can be set to override this detection.
+Valid values are `ssh` (to use OpenSSH options), `plink`, `putty`,
+`tortoiseplink`, `simple` (no options except the host and remote command).
+The default auto-detection can be explicitly requested using the value
+`auto`. Any other value is treated as `ssh`. This setting can also be
+overridden via the environment variable `GIT_SSH_VARIANT`.
++
+The current command-line parameters used for each variant are as
+follows:
++
+--
+
+* `ssh` - [-p port] [-4] [-6] [-o option] [username@]host command
+
+* `simple` - [username@]host command
+
+* `plink` or `putty` - [-P port] [-4] [-6] [username@]host command
+
+* `tortoiseplink` - [-P port] [-4] [-6] -batch [username@]host command
+
+--
++
+Except for the `simple` variant, command-line parameters are likely to
+change as git gains new features.
+
i18n.commitEncoding::
Character encoding the commit messages are stored in; Git itself
does not care per se, but this information is necessary e.g. when
i.e. it cannot be used to follow multiple files and does not work well
on non-linear history.
+log.graphColors::
+ A list of colors, separated by commas, that can be used to draw
+ history lines in `git log --graph`.
+
log.showRoot::
If true, the initial commit will be shown as a big creation event.
This is equivalent to a diff against an empty tree.
Tools like linkgit:git-log[1] or linkgit:git-whatchanged[1], which
normally hide the root commit will now show it. True by default.
+log.showSignature::
+ If true, makes linkgit:git-log[1], linkgit:git-show[1], and
+ linkgit:git-whatchanged[1] assume `--show-signature`.
+
log.mailmap::
If true, makes linkgit:git-log[1], linkgit:git-show[1], and
linkgit:git-whatchanged[1] assume `--use-mailmap`.
Note that an alias with the same name as a built-in format
will be silently ignored.
+protocol.allow::
+ If set, provide a user defined default policy for all protocols which
+ don't explicitly have a policy (`protocol.<name>.allow`). By default,
+ if unset, known-safe protocols (http, https, git, ssh, file) have a
+ default policy of `always`, known-dangerous protocols (ext) have a
+ default policy of `never`, and all other protocols have a default
+ policy of `user`. Supported policies:
++
+--
+
+* `always` - protocol is always able to be used.
+
+* `never` - protocol is never able to be used.
+
+* `user` - protocol is only able to be used when `GIT_PROTOCOL_FROM_USER` is
+ either unset or has a value of 1. This policy should be used when you want a
+ protocol to be directly usable by the user but don't want it used by commands which
+ execute clone/fetch/push commands without user input, e.g. recursive
+ submodule initialization.
+
+--
+
+protocol.<name>.allow::
+ Set a policy to be used by protocol `<name>` with clone/fetch/push
+ commands. See `protocol.allow` above for the available policies.
++
+The protocol names currently used by git are:
++
+--
+ - `file`: any local file-based path (including `file://` URLs,
+ or local paths)
+
+ - `git`: the anonymous git protocol over a direct TCP
+ connection (or proxy, if configured)
+
+ - `ssh`: git over ssh (including `host:path` syntax,
+ `ssh://`, etc).
+
+ - `http`: git over http, both "smart http" and "dumb http".
+ Note that this does _not_ include `https`; if you want to configure
+ both, you must do so individually.
+
+ - any external helpers are named by their protocol (e.g., use
+ `hg` to allow the `git-remote-hg` helper)
+--
+
+protocol.version::
+ Experimental. If set, clients will attempt to communicate with a
+ server using the specified protocol version. If unset, no
+ attempt will be made by the client to communicate using a
+ particular protocol version, this results in protocol version 0
+ being used.
+ Supported versions:
++
+--
+
+* `0` - the original wire protocol.
+
+* `1` - the original wire protocol with the addition of a version string
+ in the initial response from the server.
+
+--
+
pull.ff::
By default, Git does not create an extra merge commit when merging
a commit that is a descendant of the current commit. Instead, the
pushing to the same repository you would normally pull from
(i.e. central workflow).
+* `tracking` - This is a deprecated synonym for `upstream`.
+
* `simple` - in centralized workflow, work like `upstream` with an
added safety to refuse to push if the upstream branch's name is
different from the local one.
override a value from a lower-priority config file. An explicit
command-line flag always overrides this config option.
+push.pushOption::
+ When no `--push-option=<option>` argument is given from the
+ command line, `git push` behaves as if each <value> of
+ this variable is given as `--push-option=<value>`.
++
+This is a multi-valued variable, and an empty value can be used in a
+higher priority configuration file (e.g. `.git/config` in a
+repository) to clear the values inherited from a lower priority
+configuration files (e.g. `$HOME/.gitconfig`).
++
+--
+
+Example:
+
+/etc/gitconfig
+ push.pushoption = a
+ push.pushoption = b
+
+~/.gitconfig
+ push.pushoption = c
+
+repo/.git/config
+ push.pushoption =
+ push.pushoption = b
+
+This will result in only b (a and c are cleared).
+
+--
+
push.recurseSubmodules::
Make sure all submodule commits used by the revisions to be pushed
are available on a remote-tracking branch. If the value is 'check'
is retained. You may override this configuration at time of push by
specifying '--recurse-submodules=check|on-demand|no'.
-rebase.stat::
- Whether to show a diffstat of what changed upstream since the last
- rebase. False by default.
-
-rebase.autoSquash::
- If set to true enable `--autosquash` option by default.
-
-rebase.autoStash::
- When set to true, automatically create a temporary stash
- before the operation begins, and apply it after the operation
- ends. This means that you can run rebase on a dirty worktree.
- However, use with care: the final stash application after a
- successful rebase might result in non-trivial conflicts.
- Defaults to false.
-
-rebase.missingCommitsCheck::
- If set to "warn", git rebase -i will print a warning if some
- commits are removed (e.g. a line was deleted), however the
- rebase will still proceed. If set to "error", it will print
- the previous warning and stop the rebase, 'git rebase
- --edit-todo' can then be used to correct the error. If set to
- "ignore", no checking is done.
- To drop a commit without warning or error, use the `drop`
- command in the todo-list.
- Defaults to "ignore".
-
-rebase.instructionFormat::
- A format string, as specified in linkgit:git-log[1], to be used for
- the instruction list during an interactive rebase. The format will automatically
- have the long commit hash prepended to the format.
+include::rebase-config.txt[]
receive.advertiseAtomic::
By default, git-receive-pack will advertise the atomic push
capability, set this variable to false.
receive.advertisePushOptions::
- By default, git-receive-pack will advertise the push options
- capability to its clients. If you don't want to advertise this
- capability, set this variable to false.
+ When set to true, git-receive-pack will advertise the push options
+ capability to its clients. False by default.
receive.autogc::
By default, git-receive-pack will run "git-gc --auto" after
especially on slow filesystems. If not set, the value of
`transfer.unpackLimit` is used instead.
+receive.maxInputSize::
+ If the size of the incoming pack stream is larger than this
+ limit, then git-receive-pack will error out, instead of
+ accepting the pack file. If not set or set to 0, then the size
+ is unlimited.
+
receive.denyDeletes::
If set to true, git-receive-pack will deny a ref update that deletes
the ref. Use this to prevent such a ref deletion via a push.
sendemail.<identity>.*::
Identity-specific versions of the 'sendemail.*' parameters
- found below, taking precedence over those when the this
- identity is selected, through command-line or
+ found below, taking precedence over those when this
+ identity is selected, through either the command-line or
`sendemail.identity`.
sendemail.aliasesFile::
sendemail.suppresscc::
sendemail.suppressFrom::
sendemail.to::
+sendemail.tocmd::
sendemail.smtpDomain::
sendemail.smtpServer::
sendemail.smtpServerPort::
sendemail.signedoffcc (deprecated)::
Deprecated alias for `sendemail.signedoffbycc`.
+sendemail.smtpBatchSize::
+ Number of messages to be sent per connection, after that a relogin
+ will happen. If the value is 0 or undefined, send all messages in
+ one connection.
+ See also the `--batch-size` option of linkgit:git-send-email[1].
+
+sendemail.smtpReloginDelay::
+ Seconds wait before reconnecting to smtp server.
+ See also the `--relogin-delay` option of linkgit:git-send-email[1].
+
showbranch.default::
The default set of branches for linkgit:git-show-branch[1].
See linkgit:git-show-branch[1].
+splitIndex.maxPercentChange::
+ When the split index feature is used, this specifies the
+ percent of entries the split index can contain compared to the
+ total number of entries in both the split index and the shared
+ index before a new shared index is written.
+ The value should be between 0 and 100. If the value is 0 then
+ a new shared index is always written, if it is 100 a new
+ shared index is never written.
+ By default the value is 20, so a new shared index is written
+ if the number of entries in the split index would be greater
+ than 20 percent of the total number of entries.
+ See linkgit:git-update-index[1].
+
+splitIndex.sharedIndexExpire::
+ When the split index feature is used, shared index files that
+ were not modified since the time this variable specifies will
+ be removed when a new shared index file is created. The value
+ "now" expires all entries immediately, and "never" suppresses
+ expiration altogether.
+ The default value is "2.weeks.ago".
+ Note that a shared index file is considered modified (for the
+ purpose of expiration) each time a new split-index file is
+ either created based on it or read from it.
+ See linkgit:git-update-index[1].
+
status.relativePaths::
By default, linkgit:git-status[1] shows paths relative to the
current directory. Setting this variable to `false` shows paths
behavior of linkgit:git-status[1] in Git 1.8.4 and previous.
Defaults to false.
+status.showStash::
+ If set to true, linkgit:git-status[1] will display the number of
+ entries currently stashed away.
+ Defaults to false.
+
status.showUntrackedFiles::
By default, linkgit:git-status[1] and linkgit:git-commit[1] show
files which are not currently tracked by Git. Directories which
stash.showPatch::
If this is set to true, the `git stash show` command without an
- option will show the stash in patch form. Defaults to false.
+ option will show the stash entry in patch form. Defaults to false.
See description of 'show' command in linkgit:git-stash[1].
stash.showStat::
If this is set to true, the `git stash show` command without an
- option will show diffstat of the stash. Defaults to true.
+ option will show diffstat of the stash entry. Defaults to true.
See description of 'show' command in linkgit:git-stash[1].
submodule.<name>.url::
The URL for a submodule. This variable is copied from the .gitmodules
file to the git config via 'git submodule init'. The user can change
the configured URL before obtaining the submodule via 'git submodule
- update'. After obtaining the submodule, the presence of this variable
- is used as a sign whether the submodule is of interest to git commands.
+ update'. If neither submodule.<name>.active or submodule.active are
+ set, the presence of this variable is used as a fallback to indicate
+ whether the submodule is of interest to git commands.
See linkgit:git-submodule[1] and linkgit:gitmodules[5] for details.
submodule.<name>.update::
- The default update procedure for a submodule. This variable
- is populated by `git submodule init` from the
- linkgit:gitmodules[5] file. See description of 'update'
- command in linkgit:git-submodule[1].
+ The method by which a submodule is updated by 'git submodule update',
+ which is the only affected command, others such as
+ 'git checkout --recurse-submodules' are unaffected. It exists for
+ historical reasons, when 'git submodule' was the only command to
+ interact with submodules; settings like `submodule.active`
+ and `pull.rebase` are more specific. It is populated by
+ `git submodule init` from the linkgit:gitmodules[5] file.
+ See description of 'update' command in linkgit:git-submodule[1].
submodule.<name>.branch::
The remote branch name for a submodule, used by `git submodule
"--ignore-submodules" option. The 'git submodule' commands are not
affected by this setting.
+submodule.<name>.active::
+ Boolean value indicating if the submodule is of interest to git
+ commands. This config option takes precedence over the
+ submodule.active config option.
+
+submodule.active::
+ A repeated field which contains a pathspec used to match against a
+ submodule's path to determine if the submodule is of interest to git
+ commands.
+
+submodule.recurse::
+ Specifies if commands recurse into submodules by default. This
+ applies to all commands that have a `--recurse-submodules` option.
+ Defaults to false.
+
submodule.fetchJobs::
Specifies how many submodules are fetched/cloned at the same time.
A positive integer allows up to that number of submodules fetched
in parallel. A value of 0 will give some reasonable default.
If unset, it defaults to 1.
+submodule.alternateLocation::
+ Specifies how the submodules obtain alternates when submodules are
+ cloned. Possible values are `no`, `superproject`.
+ By default `no` is assumed, which doesn't add references. When the
+ value is set to `superproject` the submodule to be cloned computes
+ its alternates location relative to the superprojects alternate.
+
+submodule.alternateErrorStrategy::
+ Specifies how to treat errors with the alternates for a submodule
+ as computed via `submodule.alternateLocation`. Possible values are
+ `ignore`, `info`, `die`. Default is `die`.
+
tag.forceSignAnnotated::
A boolean to specify whether annotated tags created should be GPG signed.
If `--annotate` is specified on the command line, it takes
`refs/namespaces/bar/refs/heads/master` are still advertised as so-called
"have" lines. In order to match refs before stripping, add a `^` in front of
the ref name. If you combine `!` and `^`, `!` must be specified first.
++
+Even if you hide refs, a client may still be able to steal the target
+objects via the techniques described in the "SECURITY" section of the
+linkgit:gitnamespaces[7] man page; it's best to keep private data in a
+separate repository.
transfer.unpackLimit::
When `fetch.unpackLimit` or `receive.unpackLimit` are
uploadarchive.allowUnreachable::
If true, allow clients to use `git archive --remote` to request
any tree, whether reachable from the ref tips or not. See the
- discussion in the `SECURITY` section of
+ discussion in the "SECURITY" section of
linkgit:git-upload-archive[1] for more details. Defaults to
`false`.
When `uploadpack.hideRefs` is in effect, allow `upload-pack`
to accept a fetch request that asks for an object at the tip
of a hidden ref (by default, such a request is rejected).
- see also `uploadpack.hideRefs`.
+ See also `uploadpack.hideRefs`. Even if this is false, a client
+ may be able to steal objects via the techniques described in the
+ "SECURITY" section of the linkgit:gitnamespaces[7] man page; it's
+ best to keep private data in a separate repository.
uploadpack.allowReachableSHA1InWant::
Allow `upload-pack` to accept a fetch request that asks for an
object that is reachable from any ref tip. However, note that
calculating object reachability is computationally expensive.
+ Defaults to `false`. Even if this is false, a client may be able
+ to steal objects via the techniques described in the "SECURITY"
+ section of the linkgit:gitnamespaces[7] man page; it's best to
+ keep private data in a separate repository.
+
+uploadpack.allowAnySHA1InWant::
+ Allow `upload-pack` to accept a fetch request that asks for any
+ object at all.
Defaults to `false`.
uploadpack.keepAlive::
the best alternative for the particular user, even for a
never-before-seen repository on the site. When more than one
insteadOf strings match a given URL, the longest match is used.
++
+Note that any protocol restrictions will be applied to the rewritten
+URL. If the rewrite changes the URL to use a custom protocol or remote
+helper, you may need to adjust the `protocol.*.allow` config to permit
+the request. In particular, protocols you expect to use for submodules
+must be set to `always` rather than the default of `user`. See the
+description of `protocol.allow` above.
url.<base>.pushInsteadOf::
Any URL that starts with this value will not be pushed to;
This option is passed unchanged to gpg's --local-user parameter,
so you may specify a key using any method that gpg supports.
-versionsort.prereleaseSuffix::
- When version sort is used in linkgit:git-tag[1], prerelease
- tags (e.g. "1.0-rc1") may appear after the main release
- "1.0". By specifying the suffix "-rc" in this variable,
- "1.0-rc1" will appear before "1.0".
-+
-This variable can be specified multiple times, once per suffix. The
-order of suffixes in the config file determines the sorting order
-(e.g. if "-pre" appears before "-rc" in the config file then 1.0-preXX
-is sorted before 1.0-rcXX). The sorting order between different
-suffixes is undefined if they are in multiple config files.
+versionsort.prereleaseSuffix (deprecated)::
+ Deprecated alias for `versionsort.suffix`. Ignored if
+ `versionsort.suffix` is set.
+
+versionsort.suffix::
+ Even when version sort is used in linkgit:git-tag[1], tagnames
+ with the same base version but different suffixes are still sorted
+ lexicographically, resulting e.g. in prerelease tags appearing
+ after the main release (e.g. "1.0-rc1" after "1.0"). This
+ variable can be specified to determine the sorting order of tags
+ with different suffixes.
++
+By specifying a single suffix in this variable, any tagname containing
+that suffix will appear before the corresponding main release. E.g. if
+the variable is set to "-rc", then all "1.0-rcX" tags will appear before
+"1.0". If specified multiple times, once per suffix, then the order of
+suffixes in the configuration will determine the sorting order of tagnames
+with those suffixes. E.g. if "-pre" appears before "-rc" in the
+configuration, then all "1.0-preX" tags will be listed before any
+"1.0-rcX" tags. The placement of the main release tag relative to tags
+with various suffixes can be determined by specifying the empty suffix
+among those other suffixes. E.g. if the suffixes "-rc", "", "-ck" and
+"-bfs" appear in the configuration in this order, then all "v4.8-rcX" tags
+are listed first, followed by "v4.8", then "v4.8-ckX" and finally
+"v4.8-bfsX".
++
+If more than one suffixes match the same tagname, then that tagname will
+be sorted according to the suffix which starts at the earliest position in
+the tagname. If more than one different matching suffixes start at
+that earliest position, then that tagname will be sorted according to the
+longest of those suffixes.
+The sorting order between different suffixes is undefined if they are
+in multiple config files.
web.browser::
Specify a web browser that may be used by some commands.
Currently only linkgit:git-instaweb[1] and linkgit:git-help[1]
may use it.
+
+worktree.guessRemote::
+ With `add`, if no branch argument, and neither of `-b` nor
+ `-B` nor `--detach` are given, the command defaults to
+ creating a new branch from HEAD. If `worktree.guessRemote` is
+ set to true, `worktree add` tries to find a remote-tracking
+ branch whose name uniquely matches the new branch name. If
+ such a branch exists, it is checked out and set as "upstream"
+ for the new branch. If no such match can be found, it falls
+ back to creating a new branch from the current HEAD.