* The 'push to upstream' implementation was broken in some corner
cases. "git push $there" without refspec, when the current branch
is set to push to a remote different from $there, used to push to
- $there using the upstream information to a remote unreleated to
+ $there using the upstream information to a remote unrelated to
$there.
* Giving "--continue" to a conflicted "rebase -i" session skipped a
needed it so far.
* Git 2.11 had a minor regression in "merge --ff-only" that competed
- with another process that simultanously attempted to update the
+ with another process that simultaneously attempted to update the
index. We used to explain what went wrong with an error message,
but the new code silently failed. The error message has been
resurrected.
even when the other side hasn't enabled allowTipSHA1InWant.
* The recently introduced "[includeIf "gitdir:$dir"] path=..."
- mechansim has further been taught to take symlinks into account.
+ mechanism has further been taught to take symlinks into account.
The directory "$dir" specified in "gitdir:$dir" may be a symlink to
a real location, not something that $(getcwd) may return. In such
a case, a realpath of "$dir" is compared with the real path of the
Split a commit apart into a sequence of commits::
+
-Suppose that you have created lots of logically separate changes and commited
+Suppose that you have created lots of logically separate changes and committed
them together. Then, later you decide that it might be better to have each
logical chunk associated with its own commit. You can use git reset to rewind
history without changing the contents of your local files, and then successively
the explicit 'init' step if you do not intend to customize
any submodule locations.
+
-See the add subcommand for the defintion of default remote.
+See the add subcommand for the definition of default remote.
deinit [-f|--force] (--all|[--] <path>...)::
Unregister the given submodules, i.e. remove the whole
/*
* use the symlink as the remaining components that
- * need to be resloved
+ * need to be resolved
*/
strbuf_swap(&symlink, &remaining);
}
return 0;
if (!is_submodule_populated_gently(path, NULL)) {
/*
- * If searching history, check for the presense of the
+ * If searching history, check for the presence of the
* submodule's gitdir before skipping the submodule.
*/
if (oid) {
if (BE (INT_MAX / 2 / sizeof (re_dfastate_t *) <= pstr->bufs_len, 0))
return REG_ESPACE;
- /* Double the lengthes of the buffers. */
+ /* Double the lengths of the buffers. */
ret = re_string_realloc_buffers (pstr, pstr->bufs_len * 2);
if (BE (ret != REG_NOERROR, 0))
return ret;
class CLIRecipientsEnvironmentMixin(Environment):
- """Mixin storing recipients information comming from the
+ """Mixin storing recipients information coming from the
command-line."""
def __init__(self, cli_recipients=None, **kw):
my $n = 0;
my $n_actual = 0;
- my $last_timestamp = 0; # Placeholer in case $rev->timestamp is undefined
+ my $last_timestamp = 0; # Placeholder in case $rev->timestamp is undefined
foreach my $pagerevid (@{$revision_ids}) {
# Count page even if we skip it, since we display
Please, follow the standards given by git. See git/t/README.
New file should be named as t936[0-9]-*.sh.
-Be sure to reset your wiki regulary with the function `wiki_reset`.
+Be sure to reset your wiki regularly with the function `wiki_reset`.
return @list;
}
-# written with help of Tree::Trie module (Perl Artistic License, GPL compatibile)
+# written with help of Tree::Trie module (Perl Artistic License, GPL compatible)
# as side effects it sets 'forks' field to list of forks for forked projects
sub filter_forks_from_projects_list {
my $projects = shift;
"</div>\n";
}
-# returns a submenu for the nagivation of the refs views (tags, heads,
+# returns a submenu for the navigation of the refs views (tags, heads,
# remotes) with the current view disabled and the remotes view only
# available if the feature is enabled
sub format_ref_views {
static const char *unquote_comment(struct strbuf *outbuf, const char *in)
{
int c;
- int take_next_litterally = 0;
+ int take_next_literally = 0;
strbuf_addch(outbuf, '(');
while ((c = *in++) != 0) {
- if (take_next_litterally == 1) {
- take_next_litterally = 0;
+ if (take_next_literally == 1) {
+ take_next_literally = 0;
} else {
switch (c) {
case '\\':
- take_next_litterally = 1;
+ take_next_literally = 1;
continue;
case '(':
in = unquote_comment(outbuf, in);
static const char *unquote_quoted_string(struct strbuf *outbuf, const char *in)
{
int c;
- int take_next_litterally = 0;
+ int take_next_literally = 0;
while ((c = *in++) != 0) {
- if (take_next_litterally == 1) {
- take_next_litterally = 0;
+ if (take_next_literally == 1) {
+ take_next_literally = 0;
} else {
switch (c) {
case '\\':
- take_next_litterally = 1;
+ take_next_literally = 1;
continue;
case '"':
return in;
/*
* If everything is an exclude pattern, add one positive pattern
- * that matches everyting. We allocated an extra one for this.
+ * that matches everything. We allocated an extra one for this.
*/
if (nr_exclude == n) {
int plen = (!(flags & PATHSPEC_PREFER_CWD)) ? 0 : prefixlen;
printf __("The following error occurred: %s\n"), $error;
- printf __n("commited %d file\n", "commited %d files\n", $files), $files;
+ printf __n("committed %d file\n", "committed %d files\n", $files), $files;
=head1 DESCRIPTION
#define TRANSACTION_GENERIC_ERROR -2
/*
- * Perform the preparatory stages of commiting `transaction`. Acquire
+ * Perform the preparatory stages of committing `transaction`. Acquire
* any needed locks, check preconditions, etc.; basically, do as much
* as possible to ensure that the transaction will be able to go
* through, stopping just short of making any irrevocable or
* On failure, abort the transaction, write an error message to `err`,
* and return one of the `TRANSACTION_*` constants.
*
- * Callers who don't need such fine-grained control over commiting
+ * Callers who don't need such fine-grained control over committing
* reference transactions should just call `ref_transaction_commit()`.
*/
int ref_transaction_prepare(struct ref_transaction *transaction,
* For a normal non-zero exit, we assume pack-objects wrote
* something useful to stderr. For death by signal, though,
* we should mention it to the user. The exception is SIGPIPE
- * (141), because that's a normal occurence if the remote end
+ * (141), because that's a normal occurrence if the remote end
* hangs up (and we'll report that by trying to read the unpack
* status).
*/
#ifdef _MSC_VER
#pragma warning(push)
-#pragma warning(disable: 4127) /* Complier complains about the checks in the above macro being constant. */
+#pragma warning(disable: 4127) /* Compiler complains about the checks in the above macro being constant. */
#endif
#ifdef DOSTORESTATE0
int has_commit = 1;
/*
- * Perform a cheap, but incorrect check for the existance of 'commits'.
+ * Perform a cheap, but incorrect check for the existence of 'commits'.
* This is done by adding the submodule's object store to the in-core
- * object store, and then querying for each commit's existance. If we
+ * object store, and then querying for each commit's existence. If we
* do not have the commit object anywhere, there is no chance we have
* it in the object store of the correct submodule and have it
* reachable from a ref, so we can fail early without spawning rev-list
result = strcmp_offset(argv[1], argv[2], &offset);
/*
- * Because differnt CRTs behave differently, only rely on signs
+ * Because different CRTs behave differently, only rely on signs
* of the result values.
*/
result = (result < 0 ? -1 :
)
'
-test_expect_success 'commit: ita entries ignored in empty intial commit check' '
- git init empty-intial-commit &&
+test_expect_success 'commit: ita entries ignored in empty initial commit check' '
+ git init empty-initial-commit &&
(
- cd empty-intial-commit &&
+ cd empty-initial-commit &&
: >one &&
git add -N one &&
test_must_fail git commit -m nothing-new-here
pathmatch 1 ab/cXd/efXg/hi '*/*X*/*/*i'
pathmatch 1 ab/cXd/efXg/hi '*Xg*i'
-# Case-sensitivy features
+# Case-sensitivity features
match 0 x 'a' '[A-Z]'
match 1 x 'A' '[A-Z]'
match 0 x 'A' '[a-z]'
# Prefix the output with the command line arguments, and
# replace SP with a dot both in the expecte and actual output
- # so that test_cmp would show the differene together with the
+ # so that test_cmp would show the difference together with the
# breakage in a way easier to consume by the debugging user.
{
echo "git show -s $*"
test_when_finished "rm -rf super_clone" &&
git config -f .gitmodules submodule.sub.shallow true &&
git add .gitmodules &&
- git commit -m "recommed shallow for sub" &&
+ git commit -m "recommend shallow for sub" &&
git clone --recurse-submodules --no-local "file://$pwd/." super_clone &&
(
cd super_clone &&
test_when_finished "rm -rf super_clone" &&
git config -f .gitmodules submodule.sub.shallow false &&
git add .gitmodules &&
- git commit -m "recommed non shallow for sub" &&
+ git commit -m "recommend non shallow for sub" &&
git clone --recurse-submodules --no-local "file://$pwd/." super_clone &&
(
cd super_clone &&
test_cmp expect out
'
-test_expect_success 'describe chokes on severly broken submodules' '
+test_expect_success 'describe chokes on severely broken submodules' '
mv .git/modules/sub1/ .git/modules/sub_moved &&
test_must_fail git describe --dirty
'
test_cmp expect.2 actual.2
'
-test_expect_success 'absorbing does not fail for deinitalized submodules' '
+test_expect_success 'absorbing does not fail for deinitialized submodules' '
test_when_finished "git submodule update --init" &&
git submodule deinit --all &&
git submodule absorbgitdirs &&
test_description='Test submodule--helper is-active
-This test verifies that `git submodue--helper is-active` correclty identifies
+This test verifies that `git submodue--helper is-active` correctly identifies
submodules which are "active" and interesting to the user.
'
#
# notemodify, three ways to say dataref
#
-test_expect_success 'S: notemodify with garabge after mark dataref must fail' '
+test_expect_success 'S: notemodify with garbage after mark dataref must fail' '
test_must_fail git fast-import --import-marks=marks <<-EOF 2>err &&
commit refs/heads/S
committer $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> $GIT_COMMITTER_DATE