--- /dev/null
+Git v1.7.5.3 Release Notes
+==========================
+
+Fixes since v1.7.5.2
+--------------------
+
+ * The bash completion scripts should correctly work using zsh's bash
+ completion emulation layer now.
+
+ * Setting $(prefix) in config.mak did not affect where etc/gitconfig
+ file is read from, even though passing it from the command line of
+ $(MAKE) did.
+
+ * The logic to handle "&" (expand to UNIX username) in GECOS field
+ miscounted the length of the name it formatted.
+
+ * "git cherry-pick -s resolve" failed to cherry-pick a root commit.
+
+ * "git diff --word-diff" misbehaved when diff.suppress-blank-empty was
+ in effect.
+
+ * "git log --stdin path" with an input that has additional pathspec
+ used to corrupt memory.
+
+ * "git send-pack" (hence "git push") over smalt-HTTP protocol could
+ deadlock when the client side pack-object died early.
+
+ * Compressed tarball gitweb generates used to be made with the timestamp
+ of the tarball generation; this was bad because snapshot from the same
+ tree should result in a same tarball.
+
+And other minor fixes and documentation updates.
--- /dev/null
+Git v1.7.5.4 Release Notes
+==========================
+
+Fixes since v1.7.5.3
+--------------------
+
+ * The single-key mode of "git add -p" was easily fooled into thinking
+ that it was told to add everthing ('a') when up-arrow was pressed by
+ mistake.
+
+ * "git diff -C -C" used to disable the rename detection entirely when
+ there are too many copy candidate paths in the tree; now it falls
+ back to "-C" when doing so would keep the copy candidate paths
+ under the rename detection limit.
+
+ * "git rerere" did not diagnose a corrupt MERGE_RR file in some cases.
+
+And other minor fixes and documentation updates.
Some of patches I receive or pick up from the list share common
patterns of breakage. Please make sure your MUA is set up
-properly not to corrupt whitespaces. Here are two common ones
-I have seen:
+properly not to corrupt whitespaces.
-* Empty context lines that do not have _any_ whitespace.
+See the DISCUSSION section of git-format-patch(1) for hints on
+checking your patch by mailing it to yourself and applying with
+git-am(1).
-* Non empty context lines that have one extra whitespace at the
- beginning.
-
-One test you could do yourself if your MUA is set up correctly is:
-
-* Send the patch to yourself, exactly the way you would, except
- To: and Cc: lines, which would not contain the list and
- maintainer address.
-
-* Save that patch to a file in UNIX mailbox format. Call it say
- a.patch.
-
-* Try to apply to the tip of the "master" branch from the
- git.git public repository:
-
- $ git fetch http://kernel.org/pub/scm/git/git.git master:test-apply
- $ git checkout test-apply
- $ git reset --hard
- $ git am a.patch
-
-If it does not apply correctly, there can be various reasons.
-
-* Your patch itself does not apply cleanly. That is _bad_ but
- does not have much to do with your MUA. Please rebase the
- patch appropriately.
-
-* Your MUA corrupted your patch; "am" would complain that
- the patch does not apply. Look at .git/rebase-apply/ subdirectory and
- see what 'patch' file contains and check for the common
- corruption patterns mentioned above.
-
-* While you are at it, check what are in 'info' and
- 'final-commit' files as well. If what is in 'final-commit' is
- not exactly what you would want to see in the commit log
- message, it is very likely that your maintainer would end up
- hand editing the log message when he applies your patch.
- Things like "Hi, this is my first patch.\n", if you really
- want to put in the patch e-mail, should come after the
- three-dash line that signals the end of the commit message.
+While you are at it, check the resulting commit log message from
+a trial run of applying the patch. If what is in the resulting
+commit is not exactly what you would want to see, it is very
+likely that your maintainer would end up hand editing the log
+message when he applies your patch. Things like "Hi, this is my
+first patch.\n", if you really want to put in the patch e-mail,
+should come after the three-dash line that signals the end of the
+commit message.
Pine
it.
-Thunderbird
------------
-
-(A Large Angry SCM)
-
-By default, Thunderbird will both wrap emails as well as flag them as
-being 'format=flowed', both of which will make the resulting email unusable
-by git.
-
-Here are some hints on how to successfully submit patches inline using
-Thunderbird.
-
-There are two different approaches. One approach is to configure
-Thunderbird to not mangle patches. The second approach is to use
-an external editor to keep Thunderbird from mangling the patches.
-
-Approach #1 (configuration):
-
-This recipe is current as of Thunderbird 2.0.0.19. Three steps:
- 1. Configure your mail server composition as plain text
- Edit...Account Settings...Composition & Addressing,
- uncheck 'Compose Messages in HTML'.
- 2. Configure your general composition window to not wrap
- Edit..Preferences..Composition, wrap plain text messages at 0
- 3. Disable the use of format=flowed
- Edit..Preferences..Advanced..Config Editor. Search for:
- mailnews.send_plaintext_flowed
- toggle it to make sure it is set to 'false'.
-
-After that is done, you should be able to compose email as you
-otherwise would (cut + paste, git-format-patch | git-imap-send, etc),
-and the patches should not be mangled.
-
-Approach #2 (external editor):
-
-This recipe appears to work with the current [*1*] Thunderbird from Suse.
-
-The following Thunderbird extensions are needed:
- AboutConfig 0.5
- http://aboutconfig.mozdev.org/
- External Editor 0.7.2
- http://globs.org/articles.php?lng=en&pg=8
-
-1) Prepare the patch as a text file using your method of choice.
-
-2) Before opening a compose window, use Edit->Account Settings to
-uncheck the "Compose messages in HTML format" setting in the
-"Composition & Addressing" panel of the account to be used to send the
-patch. [*2*]
-
-3) In the main Thunderbird window, _before_ you open the compose window
-for the patch, use Tools->about:config to set the following to the
-indicated values:
- mailnews.send_plaintext_flowed => false
- mailnews.wraplength => 0
-
-4) Open a compose window and click the external editor icon.
-
-5) In the external editor window, read in the patch file and exit the
-editor normally.
-
-6) Back in the compose window: Add whatever other text you wish to the
-message, complete the addressing and subject fields, and press send.
-
-7) Optionally, undo the about:config/account settings changes made in
-steps 2 & 3.
+Thunderbird, KMail, GMail
+-------------------------
-
-[Footnotes]
-*1* Version 1.0 (20041207) from the MozillaThunderbird-1.0-5 rpm of Suse
-9.3 professional updates.
-
-*2* It may be possible to do this with about:config and the following
-settings but I haven't tried, yet.
- mail.html_compose => false
- mail.identity.default.compose_html => false
- mail.identity.id?.compose_html => false
-
-(Lukas Sandström)
-
-There is a script in contrib/thunderbird-patch-inline which can help
-you include patches with Thunderbird in an easy way. To use it, do the
-steps above and then use the script as the external editor.
+See the MUA-SPECIFIC HINTS section of git-format-patch(1).
Gnus
----
whitespaces (fatal in patches). Running 'C-u g' to display the
message in raw form before using '|' to run the pipe can work
this problem around.
-
-
-KMail
------
-
-This should help you to submit patches inline using KMail.
-
-1) Prepare the patch as a text file.
-
-2) Click on New Mail.
-
-3) Go under "Options" in the Composer window and be sure that
-"Word wrap" is not set.
-
-4) Use Message -> Insert file... and insert the patch.
-
-5) Back in the compose window: add whatever other text you wish to the
-message, complete the addressing and subject fields, and press send.
-
-
-Gmail
------
-
-GMail does not appear to have any way to turn off line wrapping in the web
-interface, so this will mangle any emails that you send. You can however
-use "git send-email" and send your patches through the GMail SMTP server, or
-use any IMAP email client to connect to the google IMAP server and forward
-the emails through that.
-
-To use "git send-email" and send your patches through the GMail SMTP server,
-edit ~/.gitconfig to specify your account settings:
-
-[sendemail]
- smtpencryption = tls
- smtpserver = smtp.gmail.com
- smtpuser = user@gmail.com
- smtppass = p4ssw0rd
- smtpserverport = 587
-
-Once your commits are ready to be sent to the mailing list, run the
-following commands:
-
- $ git format-patch --cover-letter -M origin/master -o outgoing/
- $ edit outgoing/0000-*
- $ git send-email outgoing/*
-
-To submit using the IMAP interface, first, edit your ~/.gitconfig to specify your
-account settings:
-
-[imap]
- folder = "[Gmail]/Drafts"
- host = imaps://imap.gmail.com
- user = user@gmail.com
- pass = p4ssw0rd
- port = 993
- sslverify = false
-
-You might need to instead use: folder = "[Google Mail]/Drafts" if you get an error
-that the "Folder doesn't exist".
-
-Once your commits are ready to be sent to the mailing list, run the
-following commands:
-
- $ git format-patch --cover-letter -M --stdout origin/master | git imap-send
-
-Just make sure to disable line wrapping in the email client (GMail web
-interface will line wrap no matter what, so you need to use a real
-IMAP client).
doesn't matter.
color.diff::
- When set to `always`, always use colors in patch.
- When false (or `never`), never. When set to `true` or `auto`, use
- colors only when the output is to the terminal. Defaults to false.
+ Whether to use ANSI escape sequences to add color to patches.
+ If this is set to `always`, linkgit:git-diff[1],
+ linkgit:git-log[1], and linkgit:git-show[1] will use color
+ for all patches. If it is set to `true` or `auto`, those
+ commands will only use color when output is to the terminal.
+ Defaults to false.
++
+This does not affect linkgit:git-format-patch[1] nor the
+'git-diff-{asterisk}' plumbing commands. Can be overridden on the
+command line with the `--color[=<when>]` option.
color.diff.<slot>::
Use customized color for diff colorization. `<slot>` specifies
color.branch.<slot>.
color.ui::
- When set to `always`, always use colors in all git commands which
- are capable of colored output. When false (or `never`), never. When
- set to `true` or `auto`, use colors only when the output is to the
- terminal. When more specific variables of color.* are set, they always
- take precedence over this setting. Defaults to false.
+ This variable determines the default value for variables such
+ as `color.diff` and `color.grep` that control the use of color
+ per command family. Its scope will expand as more commands learn
+ configuration to set a default for the `--color` option. Set it
+ to `always` if you want all output not intended for machine
+ consumption to use color, to `true` or `auto` if you want such
+ output to use color when written to the terminal, or to `false` or
+ `never` if you prefer git commands not to use color unless enabled
+ explicitly with some other configuration or the `--color` option.
commit.status::
A boolean to enable/disable inclusion of status information in the
"{tilde}/" is expanded to the value of `$HOME` and "{tilde}user/" to the
specified user's home directory.
-diff.autorefreshindex::
- When using 'git diff' to compare with work tree
- files, do not consider stat-only change as changed.
- Instead, silently run `git update-index --refresh` to
- update the cached stat information for paths whose
- contents in the work tree match the contents in the
- index. This option defaults to true. Note that this
- affects only 'git diff' Porcelain, and not lower level
- 'diff' commands such as 'git diff-files'.
-
-diff.external::
- If this config variable is set, diff generation is not
- performed using the internal diff machinery, but using the
- given command. Can be overridden with the `GIT_EXTERNAL_DIFF'
- environment variable. The command is called with parameters
- as described under "git Diffs" in linkgit:git[1]. Note: if
- you want to use an external diff program only on a subset of
- your files, you might want to use linkgit:gitattributes[5] instead.
-
-diff.mnemonicprefix::
- If set, 'git diff' uses a prefix pair that is different from the
- standard "a/" and "b/" depending on what is being compared. When
- this configuration is in effect, reverse diff output also swaps
- the order of the prefixes:
-`git diff`;;
- compares the (i)ndex and the (w)ork tree;
-`git diff HEAD`;;
- compares a (c)ommit and the (w)ork tree;
-`git diff --cached`;;
- compares a (c)ommit and the (i)ndex;
-`git diff HEAD:file1 file2`;;
- compares an (o)bject and a (w)ork tree entity;
-`git diff --no-index a b`;;
- compares two non-git things (1) and (2).
-
-diff.noprefix::
- If set, 'git diff' does not show any source or destination prefix.
-
-diff.renameLimit::
- The number of files to consider when performing the copy/rename
- detection; equivalent to the 'git diff' option '-l'.
-
-diff.renames::
- Tells git to detect renames. If set to any boolean value, it
- will enable basic rename detection. If set to "copies" or
- "copy", it will detect copies, as well.
-
-diff.ignoreSubmodules::
- Sets the default value of --ignore-submodules. Note that this
- affects only 'git diff' Porcelain, and not lower level 'diff'
- commands such as 'git diff-files'. 'git checkout' also honors
- this setting when reporting uncommitted changes.
-
-diff.suppressBlankEmpty::
- A boolean to inhibit the standard behavior of printing a space
- before each empty output line. Defaults to false.
-
-diff.tool::
- Controls which diff tool is used. `diff.tool` overrides
- `merge.tool` when used by linkgit:git-difftool[1] and has
- the same valid values as `merge.tool` minus "tortoisemerge"
- and plus "kompare".
+include::diff-config.txt[]
difftool.<tool>.path::
Override the path for the given tool. This is useful in case
the rights to submit this work under the same open source license.
Please see the 'SubmittingPatches' document for further discussion.
+filter.<driver>.clean::
+ The command which is used to convert the content of a worktree
+ file to a blob upon checkin. See linkgit:gitattributes[5] for
+ details.
+
+filter.<driver>.smudge::
+ The command which is used to convert the content of a blob
+ object to a worktree file upon checkout. See
+ linkgit:gitattributes[5] for details.
+
gc.aggressiveWindow::
The window size parameter used in the delta compression
algorithm used by 'git gc --aggressive'. This defaults
interactive.singlekey::
In interactive commands, allow the user to provide one-letter
input with a single key (i.e., without hitting enter).
- Currently this is used only by the `\--patch` mode of
- linkgit:git-add[1]. Note that this setting is silently
+ Currently this is used by the `\--patch` mode of
+ linkgit:git-add[1], linkgit:git-reset[1], linkgit:git-stash[1] and
+ linkgit:git-checkout[1]. Note that this setting is silently
ignored if portable keystroke input is not available.
log.date::
--- /dev/null
+diff.autorefreshindex::
+ When using 'git diff' to compare with work tree
+ files, do not consider stat-only change as changed.
+ Instead, silently run `git update-index --refresh` to
+ update the cached stat information for paths whose
+ contents in the work tree match the contents in the
+ index. This option defaults to true. Note that this
+ affects only 'git diff' Porcelain, and not lower level
+ 'diff' commands such as 'git diff-files'.
+
+diff.external::
+ If this config variable is set, diff generation is not
+ performed using the internal diff machinery, but using the
+ given command. Can be overridden with the `GIT_EXTERNAL_DIFF'
+ environment variable. The command is called with parameters
+ as described under "git Diffs" in linkgit:git[1]. Note: if
+ you want to use an external diff program only on a subset of
+ your files, you might want to use linkgit:gitattributes[5] instead.
+
+diff.ignoreSubmodules::
+ Sets the default value of --ignore-submodules. Note that this
+ affects only 'git diff' Porcelain, and not lower level 'diff'
+ commands such as 'git diff-files'. 'git checkout' also honors
+ this setting when reporting uncommitted changes.
+
+diff.mnemonicprefix::
+ If set, 'git diff' uses a prefix pair that is different from the
+ standard "a/" and "b/" depending on what is being compared. When
+ this configuration is in effect, reverse diff output also swaps
+ the order of the prefixes:
+`git diff`;;
+ compares the (i)ndex and the (w)ork tree;
+`git diff HEAD`;;
+ compares a (c)ommit and the (w)ork tree;
+`git diff --cached`;;
+ compares a (c)ommit and the (i)ndex;
+`git diff HEAD:file1 file2`;;
+ compares an (o)bject and a (w)ork tree entity;
+`git diff --no-index a b`;;
+ compares two non-git things (1) and (2).
+
+diff.noprefix::
+ If set, 'git diff' does not show any source or destination prefix.
+
+diff.renameLimit::
+ The number of files to consider when performing the copy/rename
+ detection; equivalent to the 'git diff' option '-l'.
+
+diff.renames::
+ Tells git to detect renames. If set to any boolean value, it
+ will enable basic rename detection. If set to "copies" or
+ "copy", it will detect copies, as well.
+
+diff.suppressBlankEmpty::
+ A boolean to inhibit the standard behavior of printing a space
+ before each empty output line. Defaults to false.
+
+diff.<driver>.command::
+ The custom diff driver command. See linkgit:gitattributes[5]
+ for details.
+
+diff.<driver>.xfuncname::
+ The regular expression that the diff driver should use to
+ recognize the hunk header. A built-in pattern may also be used.
+ See linkgit:gitattributes[5] for details.
+
+diff.<driver>.binary::
+ Set this option to true to make the diff driver treat files as
+ binary. See linkgit:gitattributes[5] for details.
+
+diff.<driver>.textconv::
+ The command that the diff driver should call to generate the
+ text-converted version of a file. The result of the
+ conversion is used to generate a human-readable diff. See
+ linkgit:gitattributes[5] for details.
+
+diff.<driver>.wordregex::
+ The regular expression that the diff driver should use to
+ split words in a line. See linkgit:gitattributes[5] for
+ details.
+
+diff.<driver>.cachetextconv::
+ Set this option to true to make the diff driver cache the text
+ conversion outputs. See linkgit:gitattributes[5] for details.
+
+diff.tool::
+ The diff tool to be used by linkgit:git-difftool[1]. This
+ option overrides `merge.tool`, and has the same valid built-in
+ values as `merge.tool` minus "tortoisemerge" and plus
+ "kompare". Any other value is treated as a custom diff tool,
+ and there must be a corresponding `difftool.<tool>.cmd`
+ option.
--color[=<when>]::
Show colored diff.
- The value must be always (the default), never, or auto.
+ The value must be `always` (the default for `<when>`), `never`, or `auto`.
+ The default value is `never`.
+ifdef::git-diff[]
+ It can be changed by the `color.ui` and `color.diff`
+ configuration settings.
+endif::git-diff[]
--no-color::
- Turn off colored diff, even when the configuration file
- gives the default to color output.
- Same as `--color=never`.
+ Turn off colored diff.
+ifdef::git-diff[]
+ This can be used to override configuration settings.
+endif::git-diff[]
+ It is the same as `--color=never`.
--word-diff[=<mode>]::
Show a word diff, using the <mode> to delimit changed words.
This lets you choose one path out of a 'status' like selection.
After choosing the path, it presents the diff between the index
and the working tree file and asks you if you want to stage
- the change of each hunk. You can say:
+ the change of each hunk. You can select one of the following
+ options and type return:
y - stage this hunk
n - do not stage this hunk
+
After deciding the fate for all hunks, if there is any hunk
that was chosen, the index is updated with the selected hunks.
++
+You can omit having to type return here, by setting the configuration
+variable `interactive.singlekey` to `true`.
diff::
'git checkout' [-q] [-f] [-m] [--detach] [<commit>]
'git checkout' [-q] [-f] [-m] [[-b|-B|--orphan] <new_branch>] [<start_point>]
'git checkout' [-f|--ours|--theirs|-m|--conflict=<style>] [<tree-ish>] [--] <paths>...
-'git checkout'
--patch [<tree-ish>] [--] [<paths>...]
+'git checkout'
[-p|--patch] [<tree-ish>] [--] [<paths>...]
DESCRIPTION
-----------
that is to say, the branch is not reset/created unless "git checkout" is
successful.
-'git checkout' [--patch] [<tree-ish>] [--] <pathspec>...::
+'git checkout' [-
p|--patch] [<tree-ish>] [--] <pathspec>...::
When <paths> or `--patch` are given, 'git checkout' does *not*
switch branches. It updates the named paths in the working tree
working tree (and if a <tree-ish> was specified, the index).
+
This means that you can use `git checkout -p` to selectively discard
-edits from your current working tree.
+edits from your current working tree. See the ``Interactive Mode''
+section of linkgit:git-add[1] to learn how to operate the `\--patch` mode.
<branch>::
Branch to checkout; if it refers to a branch (i.e., a name that,
'git clone' [--template=<template_directory>]
[-l] [-s] [--no-hardlinks] [-q] [-n] [--bare] [--mirror]
[-o <name>] [-b <name>] [-u <upload-pack>] [--reference <repository>]
- [--separate-git-dir|-L <git dir>]
+ [--separate-git-dir <git dir>]
[--depth <depth>] [--recursive|--recurse-submodules] [--] <repository>
[<directory>]
repository does not have a worktree/checkout (i.e. if any of
`--no-checkout`/`-n`, `--bare`, or `--mirror` is given)
--L=<git dir>::
--separate-git-dir=<git dir>::
Instead of placing the cloned repository where it is supposed
to be, place the cloned repository at the specified directory,
'git-cvsserver' uses the Perl DBI module. Please also read
its documentation if changing these variables, especially
-about `DBI->connect()`.
+about `DBI\->connect()`.
gitcvs.dbname::
Database name. The exact meaning depends on the
have not actually done a 'git update-index' on it yet - there is no
"object" associated with the new state, and you get:
- torvalds@ppc970:~/v2.6/linux> git diff-index HEAD
- *100644->100664 blob 7476bb......->000000...... kernel/sched.c
+ torvalds@ppc970:~/v2.6/linux> git diff-index --abbrev HEAD
+ :100644 100664 7476bb... 000000... kernel/sched.c
i.e., it shows that the tree has changed, and that `kernel/sched.c` has is
not up-to-date and may contain new stuff. The all-zero sha1 means that to
An example of normal usage is:
- torvalds@ppc970:~/git> git diff-tree 5319e4......
- *100664->100664 blob ac348b.......->a01513....... git-fsck-objects.c
+ torvalds@ppc970:~/git> git diff-tree --abbrev 5319e4
+ :100664 100664 ac348b... a01513... git-fsck-objects.c
which tells you that the last commit changed just one file (it's from
this one:
patch is in response to, so it is likely that you would want to keep
the Subject: line, like the example above.
+Checking for patch corruption
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+Many mailers if not set up properly will corrupt whitespace. Here are
+two common types of corruption:
+
+* Empty context lines that do not have _any_ whitespace.
+
+* Non-empty context lines that have one extra whitespace at the
+ beginning.
+
+One way to test if your MUA is set up correctly is:
+
+* Send the patch to yourself, exactly the way you would, except
+ with To: and Cc: lines that do not contain the list and
+ maintainer address.
+
+* Save that patch to a file in UNIX mailbox format. Call it a.patch,
+ say.
+
+* Apply it:
+
+ $ git fetch <project> master:test-apply
+ $ git checkout test-apply
+ $ git reset --hard
+ $ git am a.patch
+
+If it does not apply correctly, there can be various reasons.
+
+* The patch itself does not apply cleanly. That is _bad_ but
+ does not have much to do with your MUA. You might want to rebase
+ the patch with linkgit:git-rebase[1] before regenerating it in
+ this case.
+
+* The MUA corrupted your patch; "am" would complain that
+ the patch does not apply. Look in the .git/rebase-apply/ subdirectory and
+ see what 'patch' file contains and check for the common
+ corruption patterns mentioned above.
+
+* While at it, check the 'info' and 'final-commit' files as well.
+ If what is in 'final-commit' is not exactly what you would want to
+ see in the commit log message, it is very likely that the
+ receiver would end up hand editing the log message when applying
+ your patch. Things like "Hi, this is my first patch.\n" in the
+ patch e-mail should come after the three-dash line that signals
+ the end of the commit message.
+
+MUA-SPECIFIC HINTS
+------------------
+Here are some hints on how to successfully submit patches inline using
+various mailers.
+
+GMail
+~~~~~
+GMail does not have any way to turn off line wrapping in the web
+interface, so it will mangle any emails that you send. You can however
+use "git send-email" and send your patches through the GMail SMTP server, or
+use any IMAP email client to connect to the google IMAP server and forward
+the emails through that.
+
+For hints on using 'git send-email' to send your patches through the
+GMail SMTP server, see the EXAMPLE section of linkgit:git-send-email[1].
+
+For hints on submission using the IMAP interface, see the EXAMPLE
+section of linkgit:git-imap-send[1].
+
+Thunderbird
+~~~~~~~~~~~
+By default, Thunderbird will both wrap emails as well as flag
+them as being 'format=flowed', both of which will make the
+resulting email unusable by git.
+
+There are three different approaches: use an add-on to turn off line wraps,
+configure Thunderbird to not mangle patches, or use
+an external editor to keep Thunderbird from mangling the patches.
+
+Approach #1 (add-on)
+^^^^^^^^^^^^^^^^^^^^
+
+Install the Toggle Word Wrap add-on that is available from
+https://addons.mozilla.org/thunderbird/addon/toggle-word-wrap/
+It adds a menu entry "Enable Word Wrap" in the composer's "Options" menu
+that you can tick off. Now you can compose the message as you otherwise do
+(cut + paste, 'git format-patch' | 'git imap-send', etc), but you have to
+insert line breaks manually in any text that you type.
+
+Approach #2 (configuration)
+^^^^^^^^^^^^^^^^^^^^^^^^^^^
+Three steps:
+
+1. Configure your mail server composition as plain text:
+ Edit...Account Settings...Composition & Addressing,
+ uncheck "Compose Messages in HTML".
+
+2. Configure your general composition window to not wrap.
++
+In Thunderbird 2:
+Edit..Preferences..Composition, wrap plain text messages at 0
++
+In Thunderbird 3:
+Edit..Preferences..Advanced..Config Editor. Search for
+"mail.wrap_long_lines".
+Toggle it to make sure it is set to `false`.
+
+3. Disable the use of format=flowed:
+Edit..Preferences..Advanced..Config Editor. Search for
+"mailnews.send_plaintext_flowed".
+Toggle it to make sure it is set to `false`.
+
+After that is done, you should be able to compose email as you
+otherwise would (cut + paste, 'git format-patch' | 'git imap-send', etc),
+and the patches will not be mangled.
+
+Approach #3 (external editor)
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+The following Thunderbird extensions are needed:
+AboutConfig from http://aboutconfig.mozdev.org/ and
+External Editor from http://globs.org/articles.php?lng=en&pg=8
+
+1. Prepare the patch as a text file using your method of choice.
+
+2. Before opening a compose window, use Edit->Account Settings to
+ uncheck the "Compose messages in HTML format" setting in the
+ "Composition & Addressing" panel of the account to be used to
+ send the patch.
+
+3. In the main Thunderbird window, 'before' you open the compose
+ window for the patch, use Tools->about:config to set the
+ following to the indicated values:
++
+----------
+ mailnews.send_plaintext_flowed => false
+ mailnews.wraplength => 0
+----------
+
+4. Open a compose window and click the external editor icon.
+
+5. In the external editor window, read in the patch file and exit
+ the editor normally.
+
+Side note: it may be possible to do step 2 with
+about:config and the following settings but no one's tried yet.
+
+----------
+ mail.html_compose => false
+ mail.identity.default.compose_html => false
+ mail.identity.id?.compose_html => false
+----------
+
+There is a script in contrib/thunderbird-patch-inline which can help
+you include patches with Thunderbird in an easy way. To use it, do the
+steps above and then use the script as the external editor.
+
+KMail
+~~~~~
+This should help you to submit patches inline using KMail.
+
+1. Prepare the patch as a text file.
+
+2. Click on New Mail.
+
+3. Go under "Options" in the Composer window and be sure that
+ "Word wrap" is not set.
+
+4. Use Message -> Insert file... and insert the patch.
+
+5. Back in the compose window: add whatever other text you wish to the
+ message, complete the addressing and subject fields, and press send.
+
EXAMPLES
--------
..........................
+EXAMPLE
+-------
+To submit patches using GMail's IMAP interface, first, edit your ~/.gitconfig
+to specify your account settings:
+
+---------
+[imap]
+ folder = "[Gmail]/Drafts"
+ host = imaps://imap.gmail.com
+ user = user@gmail.com
+ port = 993
+ sslverify = false
+---------
+
+You might need to instead use: folder = "[Google Mail]/Drafts" if you get an error
+that the "Folder doesn't exist".
+
+Once the commits are ready to be sent, run the following command:
+
+ $ git format-patch --cover-letter -M --stdout origin/master | git imap-send
+
+Just make sure to disable line wrapping in the email client (GMail's web
+interface will wrap lines no matter what, so you need to use a real
+IMAP client).
+
CAUTION
-------
It is still your responsibility to make sure that the email message
users may wish to visit this web page for more information:
http://kb.mozillazine.org/Plain_text_e-mail_-_Thunderbird#Completely_plain_email
+SEE ALSO
+--------
+linkgit:git-format-patch[1], linkgit:git-send-email[1], mbox(5)
+
GIT
---
Part of the linkgit:git[1] suite
SYNOPSIS
--------
-'git init-db' [-q | --quiet] [--bare] [--template=<template_directory>] [--shared[=<permissions>]]
+'git init-db' [-q | --quiet] [--bare] [--template=<template_directory>] [--s
eparate-git-dir <git dir>] [--shared[=<permissions>]]
DESCRIPTION
SYNOPSIS
--------
'git init' [-q | --quiet] [--bare] [--template=<template_directory>]
- [--separate-git-dir|-L <git dir>]
+ [--separate-git-dir <git dir>]
[--shared[=<permissions>]] [directory]
Specify the directory from which templates will be used. (See the "TEMPLATE
DIRECTORY" section below.)
--L=<git dir>::
--separate-git-dir=<git dir>::
Instead of initializing the repository where it is supposed to be,
When using the import command, expect the source ref to have
been written to the destination ref. The earliest applicable
refspec takes precedence. For example
- "refs/heads/*:refs/svn/origin/branches/*" means that, after an
- "import refs/heads/name", the script has written to
+ "refs/heads/{asterisk}:refs/svn/origin/branches/{asterisk}" means
+ that, after an "import refs/heads/name", the script has written to
refs/svn/origin/branches/name. If this capability is used at
all, it must cover all refs reported by the list command; if
- it is not used, it is effectively "*:*"
+ it is not used, it is effectively "{asterisk}:{asterisk}"
REF LIST ATTRIBUTES
-------------------
--------
[verse]
'git reset' [-q] [<commit>] [--] <paths>...
-'git reset'
--patch [<commit>] [--] [<paths>...]
+'git reset'
[--patch|-p] [<commit>] [--] [<paths>...]
'git reset' [--soft | --mixed | --hard | --merge | --keep] [-q] [<commit>]
DESCRIPTION
and <commit> (defaults to HEAD). The chosen hunks are applied
in reverse to the index.
+
-This means that `git reset -p` is the opposite of `git add -p` (see
-linkgit:git-add[1]).
+This means that `git reset -p` is the opposite of `git add -p`, i.e.
+you can use it to selectively reset hunks. See the ``Interactive Mode''
+section of linkgit:git-add[1] to learn how to operate the `\--patch` mode.
'git reset' [--<mode>] [<commit>]::
This form resets the current branch head to <commit> and
one of 'always', 'never', 'cc', 'compose', or 'auto'. See '--confirm'
in the previous section for the meaning of these values.
+EXAMPLE
+-------
Use gmail as the smtp server
-----------------------------
-
-Add the following section to the config file:
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+To use 'git send-email' to send your patches through the GMail SMTP server,
+edit ~/.gitconfig to specify your account settings:
[sendemail]
smtpencryption = tls
smtpuser = yourname@gmail.com
smtpserverport = 587
+Once your commits are ready to be sent to the mailing list, run the
+following commands:
+
+ $ git format-patch --cover-letter -M origin/master -o outgoing/
+ $ edit outgoing/0000-*
+ $ git send-email outgoing/*
+
Note: the following perl modules are required
Net::SMTP::SSL, MIME::Base64 and Authen::SASL
+SEE ALSO
+--------
+linkgit:git-format-patch[1], linkgit:git-imap-send[1], mbox(5)
+
GIT
---
Part of the linkgit:git[1] suite
'git stash' drop [-q|--quiet] [<stash>]
'git stash' ( pop | apply ) [--index] [-q|--quiet] [<stash>]
'git stash' branch <branchname> [<stash>]
-'git stash' [save [--patch] [-k|--[no-]keep-index] [-q|--quiet] [<message>]]
+'git stash' [save [-p|--patch] [-k|--[no-]keep-index] [-q|--quiet] [<message>]]
'git stash' clear
'git stash' create
OPTIONS
-------
-save [--patch] [--[no-]keep-index] [-q|--quiet] [<message>]::
+save [-p|--patch] [--[no-]keep-index] [-q|--quiet] [<message>]::
Save your local modifications to a new 'stash', and run `git reset
--hard` to revert them. The <message> part is optional and gives
If the `--keep-index` option is used, all changes already added to the
index are left intact.
+
-With `--patch`, you can interactively select hunks from in the diff
+With `--patch`, you can interactively select hunks from the diff
between HEAD and the working tree to be stashed. The stash entry is
constructed such that its index state is the same as the index state
of your repository, and its worktree contains only the changes you
selected interactively. The selected changes are then rolled back
-from your worktree.
+from your worktree. See the ``Interactive Mode'' section of
+linkgit:git-add[1] to learn how to operate the `\--patch` mode.
+
The `--patch` option implies `--keep-index`. You can use
`--no-keep-index` to override this.
Show the branch and tracking info even in short-format.
--porcelain::
- Give the output in a stable, easy-to-parse format for scripts.
- Currently this is identical to --short output, but is guaranteed
- not to change in the future, making it safe for scripts.
+ Give the output in an easy-to-parse format for scripts.
+ This is similar to the short output, but will remain stable
+ across git versions and regardless of user configuration. See
+ below for details.
-u[<mode>]::
--untracked-files[=<mode>]::
The output from this command is designed to be used as a commit
template comment, and all the output lines are prefixed with '#'.
The default, long format, is designed to be human readable,
-verbose and descriptive. They are subject to change in any time.
+verbose and descriptive. Its contents and format are subject to change
+at any time.
The paths mentioned in the output, unlike many other git commands, are
made relative to the current directory if you are working in a
subdirectory (this is on purpose, to help cutting and pasting). See
the status.relativePaths config option below.
-In short-format, the status of each path is shown as
+Short Format
+~~~~~~~~~~~~
+
+In the short-format, the status of each path is shown as
XY PATH1 -> PATH2
-where `PATH1` is the path in the `HEAD`, and ` -> PATH2` part is
+where `PATH1` is the path in the `HEAD`, and the ` \-> PATH2` part is
shown only when `PATH1` corresponds to a different path in the
index/worktree (i.e. the file is renamed). The 'XY' is a two-letter
status code.
-The fields (including the `->`) are separated from each other by a
+The fields (including the `\->`) are separated from each other by a
single space. If a filename contains whitespace or other nonprintable
characters, that field will be quoted in the manner of a C string
literal: surrounded by ASCII double quote (34) characters, and with
## branchname tracking info
-There is an alternate -z format recommended for machine parsing. In
+Porcelain Format
+~~~~~~~~~~~~~~~~
+
+The porcelain format is similar to the short format, but is guaranteed
+not to change in a backwards-incompatible way between git versions or
+based on user configuration. This makes it ideal for parsing by scripts.
+The description of the short format above also describes the porcelain
+format, with a few exceptions:
+
+1. The user's color.status configuration is not respected; color will
+ always be off.
+
+2. The user's status.relativePaths configuration is not respected; paths
+ shown will always be relative to the repository root.
+
+There is also an alternate -z format recommended for machine parsing. In
that format, the status field is the same, but some other things
-change. First, the '->' is omitted from rename entries and the field
-order is reversed (e.g 'from -> to' becomes 'to from'). Second, a NUL
+change. First, the '\->' is omitted from rename entries and the field
+order is reversed (e.g 'from \-> to' becomes 'to from'). Second, a NUL
(ASCII 0) follows each filename, replacing space as a field separator
and the terminating newline (but a space still separates the status
field from the first filename). Third, filenames containing special
when committing into SVN, which can lead to merge commits reversing
previous commits in SVN.
-DESIGN PHILOSOPHY
------------------
-Merge tracking in Subversion is lacking and doing branched development
-with Subversion can be cumbersome as a result. While 'git svn' can track
+MERGE TRACKING
+--------------
+While 'git svn' can track
copy history (including branches and tags) for repositories adopting a
standard layout, it cannot yet represent merge history that happened
inside git back upstream to SVN users. Therefore it is advised that
CAVEATS
-------
-For the sake of simplicity and interoperating with a less-capable system
-(SVN), it is recommended that all 'git svn' users clone, fetch and dcommit
+For the sake of simplicity and interoperating with Subversion,
+it is recommended that all 'git svn' users clone, fetch and dcommit
directly from the SVN server, and avoid all 'git clone'/'pull'/'merge'/'push'
operations between git repositories and branches. The recommended
method of exchanging code between git branches and users is
'git format-patch' and 'git am', or just 'dcommit'ing to the SVN repository.
Running 'git merge' or 'git pull' is NOT recommended on a branch you
-plan to 'dcommit' from. Subversion does not represent merges in any
-reasonable or useful fashion; so users using Subversion cannot see any
+plan to 'dcommit' from because Subversion users cannot see any
merges you've made. Furthermore, if you merge or pull from a git branch
that is a mirror of an SVN branch, 'dcommit' may commit to the wrong
branch.
tracked when committing to SVN. I do not plan on adding support for
this as it's quite difficult and time-consuming to get working for all
the possible corner cases (git doesn't do it, either). Committing
-renamed and copied files are fully supported if they're similar enough
+renamed and copied files is fully supported if they're similar enough
for git to detect them.
CONFIGURATION
branch of the `git.git` repository.
Documentation for older releases are available here:
-* link:v1.7.5.2/git.html[documentation for release 1.7.5.2]
+* link:v1.7.5.3/git.html[documentation for release 1.7.5.3]
* release notes for
+ link:RelNotes/1.7.5.3.txt[1.7.5.3],
link:RelNotes/1.7.5.2.txt[1.7.5.2],
link:RelNotes/1.7.5.1.txt[1.7.5.1],
link:RelNotes/1.7.5.txt[1.7.5].
* As you find different pairs of files, call `diff_change()` to feed
modified files, `diff_addremove()` to feed created or deleted files,
- or `diff_unmerged()` to feed a file whose state is 'unmerged' to the
+ or `diff_unmerge()` to feed a file whose state is 'unmerged' to the
API. These are thin wrappers to a lower-level `diff_queue()` function
that is flexible enough to record any of these kinds of changes.
This is the internal representation for a single file (blob). It
records the blob object name (if known -- for a work tree file it
typically is a NUL SHA-1), filemode and pathname. This is what the
-`diff_addremove()`, `diff_change()` and `diff_unmerged()` synthesize and
+`diff_addremove()`, `diff_change()` and `diff_unmerge()` synthesize and
feed `diff_queue()` function with.
* `struct diff_filepair`
#!/bin/sh
GVF=GIT-VERSION-FILE
-DEF_VER=v1.7.5.2
+DEF_VER=v1.7.5.3
LF='
'
# mandir
# infodir
# htmldir
-# ETC_GITCONFIG (but not sysconfdir)
-# ETC_GITATTRIBUTES
+# sysconfdir
# can be specified as a relative path some/where/else;
# this is interpreted as relative to $(prefix) and "git" at
# runtime figures out where they are based on the path to the executable.
gitwebdir = $(sharedir)/gitweb
template_dir = share/git-core/templates
htmldir = share/doc/git-doc
-ifeq ($(prefix),/usr)
-sysconfdir = /etc
ETC_GITCONFIG = $(sysconfdir)/gitconfig
ETC_GITATTRIBUTES = $(sysconfdir)/gitattributes
-else
-sysconfdir = $(prefix)/etc
-ETC_GITCONFIG = etc/gitconfig
-ETC_GITATTRIBUTES = etc/gitattributes
-endif
lib = lib
# DESTDIR=
pathsep = :
-include config.mak.autogen
-include config.mak
+ifndef sysconfdir
+ifeq ($(prefix),/usr)
+sysconfdir = /etc
+else
+sysconfdir = etc
+endif
+endif
+
ifdef CHECK_HEADER_DEPENDENCIES
COMPUTE_HEADER_DEPENDENCIES =
USE_COMPUTED_HEADER_DEPENDENCIES =
-Documentation/RelNotes/1.7.5.2.txt
\ No newline at end of file
+Documentation/RelNotes/1.7.5.4.txt
\ No newline at end of file
if (more == 1)
describe_one_orphan(&sb, last);
else
- strbuf_addf(&sb, " ... and %d more.\n", more);
+ strbuf_addf(&sb, _(" ... and %d more.\n"), more);
}
fprintf(stderr,
- "Warning: you are leaving %d commit%s behind, "
+ Q_(
+ /* The singular version */
+ "Warning: you are leaving %d commit behind, "
+ "not connected to\n"
+ "any of your branches:\n\n"
+ "%s\n"
+ "If you want to keep it by creating a new branch, "
+ "this may be a good time\nto do so with:\n\n"
+ " git branch new_branch_name %s\n\n",
+ /* The plural version */
+ "Warning: you are leaving %d commits behind, "
"not connected to\n"
"any of your branches:\n\n"
"%s\n"
"If you want to keep them by creating a new branch, "
"this may be a good time\nto do so with:\n\n"
" git branch new_branch_name %s\n\n",
- lost, ((1 < lost) ? "s" : ""),
+ /* Give ngettext() the count */
+ lost),
+ lost,
sb.buf,
sha1_to_hex(commit->object.sha1));
strbuf_release(&sb);
die (_("--patch is incompatible with all other options"));
if (opts.force_detach && (opts.new_branch || opts.new_orphan_branch))
- die("--detach cannot be used with -b/-B/--orphan");
+ die(_("--detach cannot be used with -b/-B/--orphan"));
if (opts.force_detach && 0 < opts.track)
- die("--detach cannot be used with -t");
+ die(_("--detach cannot be used with -t"));
/* --track without -b should DWIM */
if (0 < opts.track && !opts.new_branch) {
}
if (opts.force_detach)
- die("git checkout: --detach does not take a path argument");
+ die(_("git checkout: --detach does not take a path argument"));
if (1 < !!opts.writeout_stage + !!opts.force + !!opts.merge)
die(_("git checkout: --ours/--theirs, --force and --merge are incompatible when\nchecking out of the index."));
"path to git-upload-pack on the remote"),
OPT_STRING(0, "depth", &option_depth, "depth",
"create a shallow clone of that depth"),
- OPT_STRING('L', "separate-git-dir", &real_git_dir, "gitdir",
+ OPT_STRING(0, "separate-git-dir", &real_git_dir, "gitdir",
"separate git dir from working tree"),
OPT_END()
if (path)
repo = xstrdup(absolute_path(repo_name));
else if (!strchr(repo_name, ':'))
- die("repository '%s' does not exist", repo_name);
+ die(_("repository '%s' does not exist"), repo_name);
else
repo = repo_name;
is_local = path && !is_bundle;
}
if (read_stdin) {
+ int saved_nrl = 0;
+ int saved_dcctc = 0;
+
if (opt->diffopt.detect_rename)
opt->diffopt.setup |= (DIFF_SETUP_USE_SIZE_CACHE |
DIFF_SETUP_USE_CACHE);
fputs(line, stdout);
fflush(stdout);
}
- else
+ else {
diff_tree_stdin(line);
+ if (saved_nrl < opt->diffopt.needed_rename_limit)
+ saved_nrl = opt->diffopt.needed_rename_limit;
+ if (opt->diffopt.degraded_cc_to_c)
+ saved_dcctc = 1;
+ }
}
+ opt->diffopt.degraded_cc_to_c = saved_dcctc;
+ opt->diffopt.needed_rename_limit = saved_nrl;
}
return diff_result_code(&opt->diffopt, 0);
static int builtin_diff_files(struct rev_info *revs, int argc, const char **argv)
{
- int result;
unsigned int options = 0;
while (1 < argc && argv[1][0] == '-') {
perror("read_cache_preload");
return -1;
}
- result = run_diff_files(revs, options);
- return diff_result_code(&revs->diffopt, result);
+ return run_diff_files(revs, options);
}
int cmd_diff(int argc, const char **argv, const char *prefix)
struct stat st;
if (!exist_ok && !stat(git_dir, &st))
- die("%s already exists", git_dir);
+ die(_("%s already exists"), git_dir);
if (!exist_ok && !stat(real_git_dir, &st))
- die("%s already exists", real_git_dir);
+ die(_("%s already exists"), real_git_dir);
/*
* make sure symlinks are resolved because we'll be
else if (S_ISDIR(st.st_mode))
src = git_link;
else
- die("unable to handle file type %d", st.st_mode);
+ die(_("unable to handle file type %d"), st.st_mode);
if (rename(src, git_dir))
- die_errno("unable to move %s to %s", src, git_dir);
+ die_errno(_("unable to move %s to %s"), src, git_dir);
}
fp = fopen(git_link, "w");
if (!fp)
- die("Could not create git link %s", git_link);
+ die(_("Could not create git link %s"), git_link);
fprintf(fp, "gitdir: %s\n", git_dir);
fclose(fp);
}
"specify that the git repository is to be shared amongst several users",
PARSE_OPT_OPTARG | PARSE_OPT_NONEG, shared_callback, 0},
OPT_BIT('q', "quiet", &flags, "be quiet", INIT_DB_QUIET),
- OPT_STRING('L', "separate-git-dir", &real_git_dir, "gitdir",
+ OPT_STRING(0, "separate-git-dir", &real_git_dir, "gitdir",
"separate git dir from working tree"),
OPT_END()
};
static int cmd_log_walk(struct rev_info *rev)
{
struct commit *commit;
+ int saved_nrl = 0;
+ int saved_dcctc = 0;
if (rev->early_output)
setup_early_output(rev);
}
free_commit_list(commit->parents);
commit->parents = NULL;
+ if (saved_nrl < rev->diffopt.needed_rename_limit)
+ saved_nrl = rev->diffopt.needed_rename_limit;
+ if (rev->diffopt.degraded_cc_to_c)
+ saved_dcctc = 1;
}
+ rev->diffopt.degraded_cc_to_c = saved_dcctc;
+ rev->diffopt.needed_rename_limit = saved_nrl;
+
if (rev->diffopt.output_format & DIFF_FORMAT_CHECKDIFF &&
DIFF_OPT_TST(&rev->diffopt, CHECK_FAILED)) {
return 02;
die(_("git write-tree failed to write a tree"));
}
+static const char *merge_argument(struct commit *commit)
+{
+ if (commit)
+ return sha1_to_hex(commit->object.sha1);
+ else
+ return EMPTY_TREE_SHA1_HEX;
+}
+
int try_merge_command(const char *strategy, size_t xopts_nr,
const char **xopts, struct commit_list *common,
const char *head_arg, struct commit_list *remotes)
args[i++] = s;
}
for (j = common; j; j = j->next)
- args[i++] = xstrdup(sha1_to_hex(j->item->object.sha1));
+ args[i++] = xstrdup(merge_argument(j->item));
args[i++] = "--";
args[i++] = head_arg;
for (j = remotes; j; j = j->next)
- args[i++] = xstrdup(sha1_to_hex(j->item->object.sha1));
+ args[i++] = xstrdup(merge_argument(j->item));
args[i] = NULL;
ret = run_command_v_opt(args, RUN_GIT_CMD);
strbuf_release(&buf);
{
strbuf_reset(&merge_msg);
if (strbuf_read_file(&merge_msg, git_path("MERGE_MSG"), 0) < 0)
- die_errno("Could not read from '%s'", git_path("MERGE_MSG"));
+ die_errno(_("Could not read from '%s'"), git_path("MERGE_MSG"));
}
static void run_prepare_commit_msg(void)
const char **args;
if (!branch)
- die("No current branch.");
+ die(_("No current branch."));
if (!branch->remote)
- die("No remote for the current branch.");
+ die(_("No remote for the current branch."));
if (!branch->merge_nr)
- die("No default upstream defined for the current branch.");
+ die(_("No default upstream defined for the current branch."));
args = xcalloc(branch->merge_nr + 1, sizeof(char *));
for (i = 0; i < branch->merge_nr; i++) {
if (!branch->merge[i]->dst)
- die("No remote tracking branch for %s from %s",
+ die(_("No remote tracking branch for %s from %s"),
branch->merge[i]->src, branch->remote_name);
args[i] = branch->merge[i]->dst;
}
}
if (file_exists(git_path("CHERRY_PICK_HEAD"))) {
if (advice_resolve_conflict)
- die("You have not concluded your cherry-pick (CHERRY_PICK_HEAD exists).\n"
- "Please, commit your changes before you can merge.");
+ die(_("You have not concluded your cherry-pick (CHERRY_PICK_HEAD exists).\n"
+ "Please, commit your changes before you can merge."));
else
- die("You have not concluded your cherry-pick (CHERRY_PICK_HEAD exists).");
+ die(_("You have not concluded your cherry-pick (CHERRY_PICK_HEAD exists)."));
}
resolve_undo_clear();
discard_cache();
if (!commit->parents) {
- if (action == REVERT)
- die (_("Cannot revert a root commit"));
parent = NULL;
}
else if (commit->parents->next) {
strbuf_addstr(&msgbuf, "\"\n\nThis reverts commit ");
strbuf_addstr(&msgbuf, sha1_to_hex(commit->object.sha1));
- if (commit->parents->next) {
+ if (commit->parents && commit->parents->next) {
strbuf_addstr(&msgbuf, ", reversing\nchanges made to ");
strbuf_addstr(&msgbuf, sha1_to_hex(parent->object.sha1));
}
static int sideband_demux(int in, int out, void *data)
{
- int *fd = data;
- int ret = recv_sideband("send-pack", fd[0], out);
+ int *fd = data, ret;
+#ifdef NO_PTHREADS
+ close(fd[1]);
+#endif
+ ret = recv_sideband("send-pack", fd[0], out);
close(out);
return ret;
}
if (pack_objects(out, remote_refs, extra_have, args) < 0) {
for (ref = remote_refs; ref; ref = ref->next)
ref->status = REF_STATUS_NONE;
+ if (args->stateless_rpc)
+ close(out);
+ if (git_connection_is_socket(conn))
+ shutdown(fd[0], SHUT_WR);
if (use_sideband)
finish_async(&demux);
return -1;
extern char *git_getpass(const char *prompt);
extern struct child_process *git_connect(int fd[2], const char *url, const char *prog, int flags);
extern int finish_connect(struct child_process *conn);
+extern int git_connection_is_socket(struct child_process *conn);
extern int path_match(const char *path, int nr, char **match);
struct extra_have_objects {
int nr, alloc;
gitexecdir = @libexecdir@/git-core
datarootdir = @datarootdir@
template_dir = @datadir@/git-core/templates
+sysconfdir = @sysconfdir@
mandir=@mandir@
return (git_proxy_command && *git_proxy_command);
}
-static void git_proxy_connect(int fd[2], char *host)
+static struct child_process *git_proxy_connect(int fd[2], char *host)
{
const char *port = STR(DEFAULT_GIT_PORT);
- const char *argv[4];
- struct child_process proxy;
+ const char **argv;
+ struct child_process *proxy;
get_host_and_port(&host, &port);
+ argv = xmalloc(sizeof(*argv) * 4);
argv[0] = git_proxy_command;
argv[1] = host;
argv[2] = port;
argv[3] = NULL;
- memset(&proxy, 0, sizeof(proxy));
- proxy.argv = argv;
- proxy.in = -1;
- proxy.out = -1;
- if (start_command(&proxy))
+ proxy = xcalloc(1, sizeof(*proxy));
+ proxy->argv = argv;
+ proxy->in = -1;
+ proxy->out = -1;
+ if (start_command(proxy))
die("cannot start proxy %s", argv[0]);
- fd[0] = proxy.out; /* read from proxy stdout */
- fd[1] = proxy.in; /* write to proxy stdin */
+ fd[0] = proxy->out; /* read from proxy stdout */
+ fd[1] = proxy->in; /* write to proxy stdin */
+ return proxy;
}
#define MAX_CMD_LEN 1024
char *host, *path;
char *end;
int c;
- struct child_process *conn;
+ struct child_process *conn = &no_fork;
enum protocol protocol = PROTO_LOCAL;
int free_path = 0;
char *port = NULL;
*/
char *target_host = xstrdup(host);
if (git_use_proxy(host))
- git_proxy_connect(fd, host);
+ conn = git_proxy_connect(fd, host);
else
git_tcp_connect(fd, host, flags);
/*
free(url);
if (free_path)
free(path);
- return &no_fork;
+ return conn;
}
conn = xcalloc(1, sizeof(*conn));
return conn;
}
+int git_connection_is_socket(struct child_process *conn)
+{
+ return conn == &no_fork;
+}
+
int finish_connect(struct child_process *conn)
{
int code;
- if (!conn || conn == &no_fork)
+ if (!conn || git_connection_is_socket(conn))
return 0;
code = finish_command(conn);
if [[ -n ${ZSH_VERSION-} ]]; then
emulate -L bash
setopt KSH_TYPESET
+
+ # workaround zsh's bug that leaves 'words' as a special
+ # variable in versions < 4.3.12
+ typeset -h words
fi
local cur words cword
if [[ -n ${ZSH_VERSION-} ]]; then
emulate -L bash
setopt KSH_TYPESET
+
+ # workaround zsh's bug that leaves 'words' as a special
+ # variable in versions < 4.3.12
+ typeset -h words
fi
__git_has_doubledash && return
emit_line(ecbdata->opt, plain, reset, line, len);
fputs("~\n", ecbdata->opt->file);
} else {
- /* don't print the prefix character */
- emit_line(ecbdata->opt, plain, reset, line+1, len-1);
+ /*
+ * Skip the prefix character, if any. With
+ * diff_suppress_blank_empty, there may be
+ * none.
+ */
+ if (line[0] != '\n') {
+ line++;
+ len--;
+ }
+ emit_line(ecbdata->opt, plain, reset, line, len);
}
return;
}
return 1;
}
+static const char rename_limit_warning[] =
+"inexact rename detection was skipped due to too many files.";
+
+static const char degrade_cc_to_c_warning[] =
+"only found copies from modified paths due to too many files.";
+
+static const char rename_limit_advice[] =
+"you may want to set your %s variable to at least "
+"%d and retry the command.";
+
+void diff_warn_rename_limit(const char *varname, int needed, int degraded_cc)
+{
+ if (degraded_cc)
+ warning(degrade_cc_to_c_warning);
+ else if (needed)
+ warning(rename_limit_warning);
+ else
+ return;
+ if (0 < needed && needed < 32767)
+ warning(rename_limit_advice, varname, needed);
+}
+
void diff_flush(struct diff_options *options)
{
struct diff_queue_struct *q = &diff_queued_diff;
int diff_result_code(struct diff_options *opt, int status)
{
int result = 0;
+
+ diff_warn_rename_limit("diff.renamelimit",
+ opt->needed_rename_limit,
+ opt->degraded_cc_to_c);
if (!DIFF_OPT_TST(opt, EXIT_WITH_STATUS) &&
!(opt->output_format & DIFF_FORMAT_CHECKDIFF))
return status;
int rename_score;
int rename_limit;
int needed_rename_limit;
+ int degraded_cc_to_c;
int show_rename_progress;
int dirstat_percent;
int setup;
extern int diff_queue_is_empty(void);
extern void diff_flush(struct diff_options*);
+extern void diff_warn_rename_limit(const char *varname, int needed, int degraded_cc);
/* diff-raw status letters */
#define DIFF_STATUS_ADDED 'A'
/* Table of rename/copy src files */
static struct diff_rename_src {
- struct diff_filespec *one;
+ struct diff_filepair *p;
unsigned short score; /* to remember the break score */
} *rename_src;
static int rename_src_nr, rename_src_alloc;
-static struct diff_rename_src *register_rename_src(struct diff_filespec *one,
- unsigned short score)
+static struct diff_rename_src *register_rename_src(struct diff_filepair *p)
{
int first, last;
+ struct diff_filespec *one = p->one;
+ unsigned short score = p->score;
first = 0;
last = rename_src_nr;
while (last > first) {
int next = (last + first) >> 1;
struct diff_rename_src *src = &(rename_src[next]);
- int cmp = strcmp(one->path, src->one->path);
+ int cmp = strcmp(one->path, src->p->one->path);
if (!cmp)
return src;
if (cmp < 0) {
if (first < rename_src_nr)
memmove(rename_src + first + 1, rename_src + first,
(rename_src_nr - first - 1) * sizeof(*rename_src));
- rename_src[first].one = one;
+ rename_src[first].p = p;
rename_src[first].score = score;
return &(rename_src[first]);
}
if (rename_dst[dst_index].pair)
die("internal error: dst already matched.");
- src = rename_src[src_index].one;
+ src = rename_src[src_index].p->one;
src->rename_used++;
src->count++;
init_hash(&file_table);
for (i = 0; i < rename_src_nr; i++)
- insert_file_table(&file_table, -1, i, rename_src[i].one);
+ insert_file_table(&file_table, -1, i, rename_src[i].p->one);
for (i = 0; i < rename_dst_nr; i++)
insert_file_table(&file_table, 1, i, rename_dst[i].two);
m[worst] = *o;
}
+/*
+ * Returns:
+ * 0 if we are under the limit;
+ * 1 if we need to disable inexact rename detection;
+ * 2 if we would be under the limit if we were given -C instead of -C -C.
+ */
+static int too_many_rename_candidates(int num_create,
+ struct diff_options *options)
+{
+ int rename_limit = options->rename_limit;
+ int num_src = rename_src_nr;
+ int i;
+
+ options->needed_rename_limit = 0;
+
+ /*
+ * This basically does a test for the rename matrix not
+ * growing larger than a "rename_limit" square matrix, ie:
+ *
+ * num_create * num_src > rename_limit * rename_limit
+ *
+ * but handles the potential overflow case specially (and we
+ * assume at least 32-bit integers)
+ */
+ if (rename_limit <= 0 || rename_limit > 32767)
+ rename_limit = 32767;
+ if ((num_create <= rename_limit || num_src <= rename_limit) &&
+ (num_create * num_src <= rename_limit * rename_limit))
+ return 0;
+
+ options->needed_rename_limit =
+ num_src > num_create ? num_src : num_create;
+
+ /* Are we running under -C -C? */
+ if (!DIFF_OPT_TST(options, FIND_COPIES_HARDER))
+ return 1;
+
+ /* Would we bust the limit if we were running under -C? */
+ for (num_src = i = 0; i < rename_src_nr; i++) {
+ if (diff_unmodified_pair(rename_src[i].p))
+ continue;
+ num_src++;
+ }
+ if ((num_create <= rename_limit || num_src <= rename_limit) &&
+ (num_create * num_src <= rename_limit * rename_limit))
+ return 2;
+ return 1;
+}
+
static int find_renames(struct diff_score *mx, int dst_cnt, int minimum_score, int copies)
{
int count = 0, i;
dst = &rename_dst[mx[i].dst];
if (dst->pair)
continue; /* already done, either exact or fuzzy. */
- if (!copies && rename_src[mx[i].src].one->rename_used)
+ if (!copies && rename_src[mx[i].src].p->one->rename_used)
continue;
record_rename_pair(mx[i].dst, mx[i].src, mx[i].score);
count++;
{
int detect_rename = options->detect_rename;
int minimum_score = options->rename_score;
- int rename_limit = options->rename_limit;
struct diff_queue_struct *q = &diff_queued_diff;
struct diff_queue_struct outq;
struct diff_score *mx;
- int i, j, rename_count;
- int num_create, num_src, dst_cnt;
+ int i, j, rename_count, skip_unmodified = 0;
+ int num_create, dst_cnt;
struct progress *progress = NULL;
if (!minimum_score)
*/
if (p->broken_pair && !p->score)
p->one->rename_used++;
- register_rename_src(p->one, p->score);
+ register_rename_src(p);
}
else if (detect_rename == DIFF_DETECT_COPY) {
/*
* one, to indicate ourselves as a user.
*/
p->one->rename_used++;
- register_rename_src(p->one, p->score);
+ register_rename_src(p);
}
}
if (rename_dst_nr == 0 || rename_src_nr == 0)
* files still remain as options for rename/copies!)
*/
num_create = (rename_dst_nr - rename_count);
- num_src = rename_src_nr;
/* All done? */
if (!num_create)
goto cleanup;
- /*
- * This basically does a test for the rename matrix not
- * growing larger than a "rename_limit" square matrix, ie:
- *
- * num_create * num_src > rename_limit * rename_limit
- *
- * but handles the potential overflow case specially (and we
- * assume at least 32-bit integers)
- */
- options->needed_rename_limit = 0;
- if (rename_limit <= 0 || rename_limit > 32767)
- rename_limit = 32767;
- if ((num_create > rename_limit && num_src > rename_limit) ||
- (num_create * num_src > rename_limit * rename_limit)) {
- options->needed_rename_limit =
- num_src > num_create ? num_src : num_create;
+ switch (too_many_rename_candidates(num_create, options)) {
+ case 1:
goto cleanup;
+ case 2:
+ options->degraded_cc_to_c = 1;
+ skip_unmodified = 1;
+ break;
+ default:
+ break;
}
if (options->show_rename_progress) {
m[j].dst = -1;
for (j = 0; j < rename_src_nr; j++) {
- struct diff_filespec *one = rename_src[j].one;
+ struct diff_filespec *one = rename_src[j].p->one;
struct diff_score this_src;
+
+ if (skip_unmodified &&
+ diff_unmodified_pair(rename_src[j].p))
+ continue;
+
this_src.score = estimate_similarity(one, two,
minimum_score);
this_src.name_score = basename_same(one, two);
va_list ap;
struct strbuf sb = STRBUF_INIT;
- strbuf_addf(&sb, "object %s:", obj->sha1?sha1_to_hex(obj->sha1):"(null)");
+ strbuf_addf(&sb, "object %s:", sha1_to_hex(obj->sha1));
va_start(ap, fmt);
strbuf_vaddf(&sb, fmt, ap);
my $normal_color = $repo->get_color("", "reset");
my $use_readkey = 0;
+my $use_termcap = 0;
+my %term_escapes;
+
sub ReadMode;
sub ReadKey;
if ($repo->config_bool("interactive.singlekey")) {
Term::ReadKey->import;
$use_readkey = 1;
};
+ eval {
+ require Term::Cap;
+ my $termcap = Term::Cap->Tgetent;
+ foreach (values %$termcap) {
+ $term_escapes{$_} = 1 if /^\e/;
+ }
+ $use_termcap = 1;
+ };
}
sub colored {
ReadMode 'cbreak';
my $key = ReadKey 0;
ReadMode 'restore';
+ if ($use_termcap and $key eq "\e") {
+ while (!defined $term_escapes{$key}) {
+ my $next = ReadKey 0.5;
+ last if (!defined $next);
+ $key .= $next;
+ }
+ $key =~ s/\e/^[/;
+ }
print "$key" if defined $key;
print "\n";
return $key;
# Run fetch only if $sha1 isn't present or it
# is not reachable from a ref.
(clear_local_git_env; cd "$path" &&
- ((rev=$(git rev-list -n 1 $sha1 --not --all 2>/dev/null) &&
+ ( (rev=$(git rev-list -n 1 $sha1 --not --all 2>/dev/null) &&
test -z "$rev") || git-fetch)) ||
die "Unable to fetch in submodule path '$path'"
fi
'type' => 'application/x-gzip',
'suffix' => '.tar.gz',
'format' => 'tar',
- 'compressor' => ['gzip']},
+ 'compressor' => ['gzip', '-n']},
'tbz2' => {
'display' => 'tar.bz2',
*dst++ = toupper(*w->pw_name);
memcpy(dst, w->pw_name + 1, nlen - 1);
dst += nlen - 1;
+ len += nlen;
}
}
if (len < sz)
#include "dir.h"
#include "submodule.h"
-static const char rename_limit_advice[] =
-"inexact rename detection was skipped because there were too many\n"
-" files. You may want to set your merge.renamelimit variable to at least\n"
-" %d and retry this merge.";
-
static struct tree *shift_tree_object(struct tree *one, struct tree *two,
const char *subtree_shift)
{
commit_list_insert(h2, &(*result)->parents->next);
}
flush_output(o);
- if (o->needed_rename_limit)
- warning(rename_limit_advice, o->needed_rename_limit);
+ if (show(o, 2))
+ diff_warn_rename_limit("merge.renamelimit",
+ o->needed_rename_limit, 0);
return clean;
}
name = xstrdup(buf);
if (fgetc(in) != '\t')
die("corrupt MERGE_RR");
- for (i = 0; i < sizeof(buf) && (buf[i] = fgetc(in)); i++)
- ; /* do nothing */
+ for (i = 0; i < sizeof(buf); i++) {
+ int c = fgetc(in);
+ if (c < 0)
+ die("corrupt MERGE_RR");
+ buf[i] = c;
+ if (c == 0)
+ break;
+ }
if (i == sizeof(buf))
die("filename too long");
string_list_insert(rr, buf)->util = name;
return 0;
}
-static void read_pathspec_from_stdin(struct rev_info *revs, struct strbuf *sb, const char ***prune_data)
-{
- const char **prune = *prune_data;
- int prune_nr;
- int prune_alloc;
+struct cmdline_pathspec {
+ int alloc;
+ int nr;
+ const char **path;
+};
- /* count existing ones */
- if (!prune)
- prune_nr = 0;
- else
- for (prune_nr = 0; prune[prune_nr]; prune_nr++)
- ;
- prune_alloc = prune_nr; /* not really, but we do not know */
+static void append_prune_data(struct cmdline_pathspec *prune, const char **av)
+{
+ while (*av) {
+ ALLOC_GROW(prune->path, prune->nr+1, prune->alloc);
+ prune->path[prune->nr++] = *(av++);
+ }
+}
+static void read_pathspec_from_stdin(struct rev_info *revs, struct strbuf *sb,
+ struct cmdline_pathspec *prune)
+{
while (strbuf_getwholeline(sb, stdin, '\n') != EOF) {
int len = sb->len;
if (len && sb->buf[len - 1] == '\n')
sb->buf[--len] = '\0';
- ALLOC_GROW(prune, prune_nr+1, prune_alloc);
- prune[prune_nr++] = xstrdup(sb->buf);
+ ALLOC_GROW(prune->path, prune->nr+1, prune->alloc);
+ prune->path[prune->nr++] = xstrdup(sb->buf);
}
- if (prune) {
- ALLOC_GROW(prune, prune_nr+1, prune_alloc);
- prune[prune_nr] = NULL;
- }
- *prune_data = prune;
}
-static void read_revisions_from_stdin(struct rev_info *revs, const char ***prune)
+static void read_revisions_from_stdin(struct rev_info *revs,
+ struct cmdline_pathspec *prune)
{
struct strbuf sb;
int seen_dashdash = 0;
return for_each_ref_in_submodule(submodule, "refs/bisect/good", fn, cb_data);
}
-static void append_prune_data(const char ***prune_data, const char **av)
-{
- const char **prune = *prune_data;
- int prune_nr;
- int prune_alloc;
-
- if (!prune) {
- *prune_data = av;
- return;
- }
-
- /* count existing ones */
- for (prune_nr = 0; prune[prune_nr]; prune_nr++)
- ;
- prune_alloc = prune_nr; /* not really, but we do not know */
-
- while (*av) {
- ALLOC_GROW(prune, prune_nr+1, prune_alloc);
- prune[prune_nr++] = *av;
- av++;
- }
- if (prune) {
- ALLOC_GROW(prune, prune_nr+1, prune_alloc);
- prune[prune_nr] = NULL;
- }
- *prune_data = prune;
-}
-
/*
* Parse revision information, filling in the "rev_info" structure,
* and removing the used arguments from the argument list.
int setup_revisions(int argc, const char **argv, struct rev_info *revs, struct setup_revision_opt *opt)
{
int i, flags, left, seen_dashdash, read_from_stdin, got_rev_arg = 0;
- const char **prune_data = NULL;
+ struct cmdline_pathspec prune_data;
const char *submodule = NULL;
const char *optarg;
int argcount;
+ memset(&prune_data, 0, sizeof(prune_data));
if (opt)
submodule = opt->submodule;
argv[i] = NULL;
argc = i;
if (argv[i + 1])
- prune_data = argv + i + 1;
+ append_prune_data(&prune_data, argv + i + 1);
seen_dashdash = 1;
break;
}
got_rev_arg = 1;
}
- if (prune_data)
- init_pathspec(&revs->prune_data, get_pathspec(revs->prefix, prune_data));
+ if (prune_data.nr) {
+ ALLOC_GROW(prune_data.path, prune_data.nr+1, prune_data.alloc);
+ prune_data.path[prune_data.nr++] = NULL;
+ init_pathspec(&revs->prune_data,
+ get_pathspec(revs->prefix, prune_data.path));
+ }
if (revs->def == NULL)
revs->def = opt ? opt->def : NULL;
static void notify_parent(void)
{
- ssize_t unused;
- unused = write(child_notifier, "", 1);
+ /*
+ * execvp failed. If possible, we'd like to let start_command
+ * know, so failures like ENOENT can be handled right away; but
+ * otherwise, finish_command will still report the error.
+ */
+ xwrite(child_notifier, "", 1);
}
static NORETURN void die_child(const char *err, va_list params)
{
char msg[4096];
- ssize_t unused;
int len = vsnprintf(msg, sizeof(msg), err, params);
if (len > sizeof(msg))
len = sizeof(msg);
- unused = write(child_err, "fatal: ", 7);
- unused = write(child_err, msg, len);
- unused = write(child_err, "\n", 1);
+ write_in_full(child_err, "fatal: ", 7);
+ write_in_full(child_err, msg, len);
+ write_in_full(child_err, "\n", 1);
exit(128);
}
#endif
const char *slash;
struct stat st;
int fd;
- size_t len;
+ ssize_t len;
if (stat(path, &st))
return NULL;
- test_expect_success [<prereq>] <message> <script>
- Usually takes two strings as parameter, and evaluates the
+ Usually takes two strings as parameters, and evaluates the
<script>. If it yields success, test is considered
successful. <message> should state what it is testing.
'tree=$(git-write-tree)'
If you supply three parameters the first will be taken to be a
- prerequisite, see the test_set_prereq and test_have_prereq
+ prerequisite; see the test_set_prereq and test_have_prereq
documentation below:
test_expect_success TTY 'git --paginate rev-list uses a pager' \
Merges the given rev using the given message. Like test_commit,
creates a tag and calls test_tick before committing.
- - test_set_prereq SOME_PREREQ
+ - test_set_prereq <prereq>
Set a test prerequisite to be used later with test_have_prereq. The
test-lib will set some prerequisites for you, see the
test_have_prereq directly, or the three argument invocation of
test_expect_success and test_expect_failure.
- - test_have_prereq SOME PREREQ
+ - test_have_prereq <prereq>
Check if we have a prerequisite previously set with
test_set_prereq. The most common use of this directly is to skip
Check whether a file has the length it is expected to.
- - test_path_is_file <file> [<diagnosis>]
- test_path_is_dir <dir> [<diagnosis>]
+ - test_path_is_file <path> [<diagnosis>]
+ test_path_is_dir <path> [<diagnosis>]
test_path_is_missing <path> [<diagnosis>]
- Check whether a file/directory exists or doesn't. <diagnosis> will
- be displayed if the test fails.
+ Check if the named path is a file, if the named path is a
+ directory, or if the named path does not exist, respectively,
+ and fail otherwise, showing the <diagnosis> text.
- test_when_finished <script>
grep "^ ! \[rejected\][ ]*$BRANCH -> $BRANCH (non-fast-forward)$" output
'
- test_expect_success C_LOCALE_OUTPUT 'non-fast-forward push shows help message' '
- grep "To prevent you from losing history, non-fast-forward updates were rejected" \
- output
+ test_expect_success 'non-fast-forward push shows help message' '
+ test_i18ngrep "To prevent you from losing history, non-fast-forward updates were rejected" output
'
}
fi
'
-test_expect_success C_LOCALE_OUTPUT 'reinit' '
+test_expect_success 'reinit' '
(
sane_unset GIT_CONFIG GIT_WORK_TREE GIT_CONFIG &&
git init >out1 2>err1 &&
git init >out2 2>err2
) &&
- grep "Initialized empty" again/out1 &&
- grep "Reinitialized existing" again/out2 &&
+ test_i18ngrep "Initialized empty" again/out1 &&
+ test_i18ngrep "Reinitialized existing" again/out2 &&
>again/empty &&
- test_cmp again/empty again/err1 &&
- test_cmp again/empty again/err2
+ test_i18ncmp again/empty again/err1 &&
+ test_i18ncmp again/empty again/err2
'
test_expect_success 'init with --template' '
cd newdir &&
mv .git here &&
ln -s here .git &&
- git init -L ../realgitdir
+ git init --separate-git-dir ../realgitdir
) &&
echo "gitdir: `pwd`/realgitdir" >expected &&
test_cmp expected newdir/.git &&
. ./test-lib.sh
+cat >hello-script <<-EOF
+ #!$SHELL_PATH
+ cat hello-script
+EOF
+>empty
+
test_expect_success 'start_command reports ENOENT' '
test-run-command start-command-ENOENT ./does-not-exist
'
+test_expect_success 'run_command can run a command' '
+ cat hello-script >hello.sh &&
+ chmod +x hello.sh &&
+ test-run-command run-command ./hello.sh >actual 2>err &&
+
+ test_cmp hello-script actual &&
+ test_cmp empty err
+'
+
+test_expect_success POSIXPERM 'run_command reports EACCES' '
+ cat hello-script >hello.sh &&
+ chmod -x hello.sh &&
+ test_must_fail test-run-command run-command ./hello.sh 2>err &&
+
+ grep "fatal: cannot exec.*hello.sh" err
+'
+
test_done
test_description="Test the svn importer's input handling routines.
-These tests exercise the line_buffer library, but their real purpose
-is to check the assumptions that library makes of the platform's input
-routines. Processes engaged in bi-directional communication would
-hang if fread or fgets is too greedy.
+These tests provide some simple checks that the line_buffer API
+behaves as advertised.
While at it, check that input of newlines and null bytes are handled
correctly.
"
. ./test-lib.sh
-test -n "$GIT_REMOTE_SVN_TEST_BIG_FILES" && test_set_prereq EXPENSIVE
-
-generate_tens_of_lines () {
- tens=$1 &&
- line=$2 &&
-
- i=0 &&
- while test $i -lt "$tens"
- do
- for j in a b c d e f g h i j
- do
- echo "$line"
- done &&
- : $((i = $i + 1)) ||
- return
- done
-}
-
-long_read_test () {
- : each line is 10 bytes, including newline &&
- line=abcdefghi &&
- echo "$line" >expect &&
-
- if ! test_declared_prereq PIPE
- then
- echo >&4 "long_read_test: need to declare PIPE prerequisite"
- return 127
- fi &&
- tens_of_lines=$(($1 / 100 + 1)) &&
- lines=$(($tens_of_lines * 10)) &&
- readsize=$((($lines - 1) * 10 + 3)) &&
- copysize=7 &&
- rm -f input &&
- mkfifo input &&
- {
- (
- generate_tens_of_lines $tens_of_lines "$line" &&
- exec sleep 100
- ) >input &
- } &&
- test-line-buffer input <<-EOF >output &&
- binary $readsize
- copy $copysize
- EOF
- kill $! &&
- test_line_count = $lines output &&
- tail -n 1 <output >actual &&
- test_cmp expect actual
-}
-
-test_expect_success 'setup: have pipes?' '
- rm -f frob &&
- if mkfifo frob
- then
- test_set_prereq PIPE
- fi
-'
-
test_expect_success 'hello world' '
echo ">HELLO" >expect &&
test-line-buffer <<-\EOF >actual &&
test_cmp expect actual
'
-test_expect_success PIPE '0-length read, no input available' '
- printf ">" >expect &&
- rm -f input &&
- mkfifo input &&
- {
- sleep 100 >input &
- } &&
- test-line-buffer input <<-\EOF >actual &&
- binary 0
- copy 0
- EOF
- kill $! &&
- test_cmp expect actual
-'
-
test_expect_success '0-length read, send along greeting' '
echo ">HELLO" >expect &&
test-line-buffer <<-\EOF >actual &&
test_cmp expect actual
'
-test_expect_success PIPE '1-byte read, no input available' '
- printf ">%s" ab >expect &&
- rm -f input &&
- mkfifo input &&
- {
- (
- printf "%s" a &&
- printf "%s" b &&
- exec sleep 100
- ) >input &
- } &&
- test-line-buffer input <<-\EOF >actual &&
- binary 1
- copy 1
- EOF
- kill $! &&
- test_cmp expect actual
-'
-
-test_expect_success PIPE 'long read (around 8192 bytes)' '
- long_read_test 8192
-'
-
-test_expect_success PIPE,EXPENSIVE 'longer read (around 65536 bytes)' '
- long_read_test 65536
-'
-
test_expect_success 'read from file descriptor' '
rm -f input &&
echo hello >expect &&
-e "s/^Fast[- ]forward /FASTFORWARD /" >resolve.output
'
-test_expect_success C_LOCALE_OUTPUT 'git resolve output' '
- test_cmp resolve.expect resolve.output
+test_expect_success 'git resolve output' '
+ test_i18ncmp resolve.expect resolve.output
'
cat > show-branch2.expect << EOF
test_cmp expect file
'
-test_expect_success C_LOCALE_OUTPUT 'checkout reports switch to branch' '
- grep "Switched to branch" stderr &&
- ! grep "^HEAD is now at" stderr
+test_expect_success 'checkout reports switch to branch' '
+ test_i18ngrep "Switched to branch" stderr &&
+ test_i18ngrep ! "^HEAD is now at" stderr
'
test_expect_success 'checkout vague ref succeeds' '
test_cmp expect file
'
-test_expect_success VAGUENESS_SUCCESS,C_LOCALE_OUTPUT 'checkout reports switch to branch' '
- grep "Switched to branch" stderr &&
- ! grep "^HEAD is now at" stderr
+test_expect_success VAGUENESS_SUCCESS 'checkout reports switch to branch' '
+ test_i18ngrep "Switched to branch" stderr &&
+ test_i18ngrep ! "^HEAD is now at" stderr
'
test_done
ORPHAN_WARNING='you are leaving .* commit.*behind'
check_orphan_warning() {
- grep "$ORPHAN_WARNING" "$1"
+ test_i18ngrep "$ORPHAN_WARNING" "$1"
}
check_no_orphan_warning() {
- ! grep "$ORPHAN_WARNING" "$1"
+ test_i18ngrep ! "$ORPHAN_WARNING" "$1"
}
reset () {
echo content >orphan &&
git add orphan &&
git commit -a -m orphan &&
- git checkout master 2>stderr &&
+ git checkout master 2>stderr
+'
+
+test_expect_success 'checkout warns on orphan commits: output' '
check_orphan_warning stderr
'
test_expect_success 'checkout does not warn leaving ref tip' '
reset &&
git checkout --detach two &&
- git checkout master 2>stderr &&
+ git checkout master 2>stderr
+'
+
+test_expect_success 'checkout does not warn leaving ref tip' '
check_no_orphan_warning stderr
'
test_expect_success 'checkout does not warn leaving reachable commit' '
reset &&
git checkout --detach HEAD^ &&
- git checkout master 2>stderr &&
+ git checkout master 2>stderr
+'
+
+test_expect_success 'checkout does not warn leaving reachable commit' '
check_no_orphan_warning stderr
'
'
-test_expect_success C_LOCALE_OUTPUT 'add -n -u should not add but just report' '
+test_expect_success 'add -n -u should not add but just report' '
(
echo "add '\''check'\''" &&
after=$(git ls-files -s check top) &&
test "$before" = "$after" &&
- test_cmp expect actual
+ test_i18ncmp expect actual
'
! test -s out
'
- test_expect_success C_LOCALE_OUTPUT "complaints for ignored $i output" '
- grep -e "Use -f if" err
+ test_expect_success "complaints for ignored $i output" '
+ test_i18ngrep -e "Use -f if" err
'
test_expect_success "complaints for ignored $i with unignored file" '
git ls-files "$i" >out &&
! test -s out
'
- test_expect_success C_LOCALE_OUTPUT "complaints for ignored $i with unignored file output" '
- grep -e "Use -f if" err
+ test_expect_success "complaints for ignored $i with unignored file output" '
+ test_i18ngrep -e "Use -f if" err
'
done
)
'
- test_expect_success C_LOCALE_OUTPUT "complaints for ignored $i in dir output" '
+ test_expect_success "complaints for ignored $i in dir output" '
(
cd dir &&
- grep -e "Use -f if" err
+ test_i18ngrep -e "Use -f if" err
)
'
done
)
'
- test_expect_success C_LOCALE_OUTPUT "complaints for ignored $i in sub output" '
+ test_expect_success "complaints for ignored $i in sub output" '
(
cd sub &&
- grep -e "Use -f if" err
+ test_i18ngrep -e "Use -f if" err
)
'
done
'
-test_expect_success C_LOCALE_OUTPUT 'fail if the index has unresolved entries' '
+test_expect_success 'fail if the index has unresolved entries' '
rm -fr [abcd] &&
git checkout -f "$c1" &&
test_must_fail git merge "$c5" &&
test_must_fail git merge "$c5" 2> out &&
- grep "not possible because you have unmerged files" out &&
+ test_i18ngrep "not possible because you have unmerged files" out &&
git add -u &&
test_must_fail git merge "$c5" 2> out &&
- grep "You have not concluded your merge" out &&
+ test_i18ngrep "You have not concluded your merge" out &&
rm -f .git/MERGE_HEAD &&
test_must_fail git merge "$c5" 2> out &&
- grep "Your local changes to the following files would be overwritten by merge:" out
+ test_i18ngrep "Your local changes to the following files would be overwritten by merge:" out
'
test_expect_success 'merge-recursive remove conflict' '
test -z "$(git config branch.my7.remote)" &&
test -z "$(git config branch.my7.merge)"'
-test_expect_success C_LOCALE_OUTPUT 'test deleting branch without config' \
+test_expect_success 'test deleting branch without config' \
'git branch my7 s &&
sha1=$(git rev-parse my7 | cut -c 1-7) &&
- test "$(git branch -d my7 2>&1)" = "Deleted branch my7 (was $sha1)."'
+ echo "Deleted branch my7 (was $sha1)." >expect &&
+ git branch -d my7 >actual 2>&1 &&
+ test_i18ncmp expect actual'
test_expect_success 'test --track without .fetch entries' \
'git branch --track my8 &&
branch-two
master
EOF
-test_expect_success C_LOCALE_OUTPUT 'git branch shows detached HEAD properly' '
+test_expect_success 'git branch shows detached HEAD properly' '
git checkout HEAD^0 &&
git branch >actual &&
- test_cmp expect actual
+ test_i18ncmp expect actual
'
test_done
)
'
-test_expect_success C_LOCALE_OUTPUT 'revert forbidden on dirty working tree' '
+test_expect_success 'revert forbidden on dirty working tree' '
echo content >extra_file &&
git add extra_file &&
test_must_fail git revert HEAD 2>errors &&
- grep "Your local changes would be overwritten by " errors
+ test_i18ngrep "Your local changes would be overwritten by " errors
'
#!/bin/sh
-test_description='test cherry-picking a root commit'
+test_description='test cherry-picking (and reverting) a root commit'
. ./test-lib.sh
test_expect_success 'cherry-pick a root commit' '
git cherry-pick master &&
- test first = $(cat file1)
+ echo first >expect &&
+ test_cmp expect file1
+
+'
+
+test_expect_success 'revert a root commit' '
+
+ git revert master &&
+ test_path_is_missing file1
+
+'
+
+test_expect_success 'cherry-pick a root commit with an external strategy' '
+
+ git cherry-pick --strategy=resolve master &&
+ echo first >expect &&
+ test_cmp expect file1
+
+'
+
+test_expect_success 'revert a root commit with an external strategy' '
+
+ git revert --strategy=resolve master &&
+ test_path_is_missing file1
'
test "$head" = "$newhead"
'
-test_expect_success C_LOCALE_OUTPUT 'advice from failed cherry-pick' "
+test_expect_success 'advice from failed cherry-pick' "
pristine_detach initial &&
picked=\$(git rev-parse --short picked) &&
EOF
test_must_fail git cherry-pick picked 2>actual &&
- test_cmp expected actual
+ test_i18ncmp expected actual
"
test_expect_success 'failed cherry-pick sets CHERRY_PICK_HEAD' '
test_must_fail git add --dry-run track-this ignored-file >actual 2>&1
"
-test_expect_success C_LOCALE_OUTPUT 'git add --dry-run of an existing file output' "
+test_expect_success 'git add --dry-run of an existing file output' "
echo \"fatal: pathspec 'ignored-file' did not match any files\" >expect &&
- test_cmp expect actual
+ test_i18ncmp expect actual
"
cat >expect.err <<\EOF
test_must_fail git add --dry-run --ignore-missing track-this ignored-file >actual.out 2>actual.err
'
-test_expect_success C_LOCALE_OUTPUT 'git add --dry-run --ignore-missing of non-existing file output' '
- test_cmp expect.out actual.out &&
- test_cmp expect.err actual.err
+test_expect_success 'git add --dry-run --ignore-missing of non-existing file output' '
+ test_i18ncmp expect.out actual.out &&
+ test_i18ncmp expect.err actual.err
'
test_done
'validate the output.' \
'compare_diff_patch current expected'
-test_expect_success C_LOCALE_OUTPUT 'favour same basenames over different ones' '
+test_expect_success 'favour same basenames over different ones' '
cp path1 another-path &&
git add another-path &&
git commit -m 1 &&
git rm path1 &&
mkdir subdir &&
git mv another-path subdir/path1 &&
- git status | grep "renamed: .*path1 -> subdir/path1"'
+ git status | test_i18ngrep "renamed: .*path1 -> subdir/path1"'
-test_expect_success C_LOCALE_OUTPUT 'favour same basenames even with minor differences' '
+test_expect_success 'favour same basenames even with minor differences' '
git show HEAD:path1 | sed "s/15/16/" > subdir/path1 &&
- git status | grep "renamed: .*path1 -> subdir/path1"'
+ git status | test_i18ngrep "renamed: .*path1 -> subdir/path1"'
+
+test_expect_success 'setup for many rename source candidates' '
+ git reset --hard &&
+ for i in 0 1 2 3 4 5 6 7 8 9;
+ do
+ for j in 0 1 2 3 4 5 6 7 8 9;
+ do
+ echo "$i$j" >"path$i$j"
+ done
+ done &&
+ git add "path??" &&
+ test_tick &&
+ git commit -m "hundred" &&
+ (cat path1; echo new) >new-path &&
+ echo old >>path1 &&
+ git add new-path path1 &&
+ git diff -l 4 -C -C --cached --name-status >actual 2>actual.err &&
+ sed -e "s/^\([CM]\)[0-9]* /\1 /" actual >actual.munged &&
+ cat >expect <<-EOF &&
+ C path1 new-path
+ M path1
+ EOF
+ test_cmp expect actual.munged &&
+ grep warning actual.err
+'
test_done
echo "fatal: --name-status does not make sense" > expect.name-status
echo "fatal: --check does not make sense" > expect.check
-test_expect_success C_LOCALE_OUTPUT 'options no longer allowed for format-patch' '
+test_expect_success 'options no longer allowed for format-patch' '
test_must_fail git format-patch --name-only 2> output &&
- test_cmp expect.name-only output &&
+ test_i18ncmp expect.name-only output &&
test_must_fail git format-patch --name-status 2> output &&
- test_cmp expect.name-status output &&
+ test_i18ncmp expect.name-status output &&
test_must_fail git format-patch --check 2> output &&
- test_cmp expect.check output'
+ test_i18ncmp expect.check output'
test_expect_success 'format-patch --numstat should produce a patch' '
git format-patch --numstat --stdout master..side > output &&
test_language_driver ruby
test_language_driver tex
+test_expect_success 'word-diff with diff.sbe' '
+ cat >expect <<-\EOF &&
+ diff --git a/pre b/post
+ index a1a53b5..bc8fe6d 100644
+ --- a/pre
+ +++ b/post
+ @@ -1,3 +1,3 @@
+ a
+
+ [-b-]{+c+}
+ EOF
+ cat >pre <<-\EOF &&
+ a
+
+ b
+ EOF
+ cat >post <<-\EOF &&
+ a
+
+ c
+ EOF
+ test_when_finished "git config --unset diff.suppress-blank-empty" &&
+ git config diff.suppress-blank-empty true &&
+ word_diff --word-diff=plain
+'
+
test_done
(
cd downstream &&
git fetch --recurse-submodules >../actual.out 2>../actual.err
- )
-'
-
-test_expect_success C_LOCALE_OUTPUT "fetch --recurse-submodules recurses into submodules: output" '
- test_cmp expect.out actual.out &&
- test_cmp expect.err actual.err
+ ) &&
+ test_i18ncmp expect.out actual.out &&
+ test_i18ncmp expect.err actual.err
'
test_expect_success "fetch alone only fetches superproject" '
cd downstream &&
git config -f .gitmodules submodule.submodule.fetchRecurseSubmodules true &&
git fetch >../actual.out 2>../actual.err
- )
-'
-
-test_expect_success C_LOCALE_OUTPUT "using fetchRecurseSubmodules=true in .gitmodules recurses into submodules" '
- test_cmp expect.out actual.out &&
- test_cmp expect.err actual.err
+ ) &&
+ test_i18ncmp expect.out actual.out &&
+ test_i18ncmp expect.err actual.err
'
test_expect_success "--no-recurse-submodules overrides .gitmodules config" '
git fetch --recurse-submodules >../actual.out 2>../actual.err &&
git config --unset -f .gitmodules submodule.submodule.fetchRecurseSubmodules &&
git config --unset submodule.submodule.fetchRecurseSubmodules
- )
-'
-
-test_expect_success C_LOCALE_OUTPUT "--recurse-submodules overrides fetchRecurseSubmodules setting from .git/config: output" '
- test_cmp expect.out actual.out &&
- test_cmp expect.err actual.err
+ ) &&
+ test_i18ncmp expect.out actual.out &&
+ test_i18ncmp expect.err actual.err
'
test_expect_success "--quiet propagates to submodules" '
(
cd downstream &&
git fetch --recurse-submodules --dry-run >../actual.out 2>../actual.err
- )
-'
-
-test_expect_success C_LOCALE_OUTPUT "--dry-run propagates to submodules: output" '
- test_cmp expect.out actual.out &&
- test_cmp expect.err actual.err
+ ) &&
+ test_i18ncmp expect.out actual.out &&
+ test_i18ncmp expect.err actual.err
'
test_expect_success "Without --dry-run propagates to submodules" '
(
cd downstream &&
git fetch --recurse-submodules >../actual.out 2>../actual.err
- )
-'
-
-test_expect_success C_LOCALE_OUTPUT "Without --dry-run propagates to submodules: output" '
- test_cmp expect.out actual.out &&
- test_cmp expect.err actual.err
+ ) &&
+ test_i18ncmp expect.out actual.out &&
+ test_i18ncmp expect.err actual.err
'
test_expect_success "recurseSubmodules=true propagates into submodules" '
cd downstream &&
git config fetch.recurseSubmodules true
git fetch >../actual.out 2>../actual.err
- )
-'
-
-test_expect_success C_LOCALE_OUTPUT "recurseSubmodules=true propagates into submodules: output" '
- test_cmp expect.out actual.out &&
- test_cmp expect.err actual.err
+ ) &&
+ test_i18ncmp expect.out actual.out &&
+ test_i18ncmp expect.err actual.err
'
test_expect_success "--recurse-submodules overrides config in submodule" '
git config fetch.recurseSubmodules false
) &&
git fetch --recurse-submodules >../actual.out 2>../actual.err
- )
-'
-
-test_expect_success C_LOCALE_OUTPUT "--recurse-submodules overrides config in submodule: output" '
- test_cmp expect.out actual.out &&
- test_cmp expect.err actual.err
+ ) &&
+ test_i18ncmp expect.out actual.out &&
+ test_i18ncmp expect.err actual.err
'
test_expect_success "--no-recurse-submodules overrides config setting" '
cd downstream &&
git fetch >../actual.out 2>../actual.err
) &&
- test_cmp expect.err.sub actual.err &&
- test_cmp expect.out.sub actual.out
+ test_i18ncmp expect.err.sub actual.err &&
+ test_i18ncmp expect.out.sub actual.out
'
test_expect_success "Recursion doesn't happen when new superproject commits don't change any submodules" '
git fetch >../actual.out 2>../actual.err
) &&
! test -s actual.out &&
- test_cmp expect.err.file actual.err
+ test_i18ncmp expect.err.file actual.err
'
test_expect_success "Recursion picks up config in submodule" '
git config --unset fetch.recurseSubmodules
)
) &&
- test_cmp expect.err.sub actual.err &&
- test_cmp expect.out actual.out
+ test_i18ncmp expect.err.sub actual.err &&
+ test_i18ncmp expect.out actual.out
'
test_expect_success "Recursion picks up all submodules when necessary" '
cd downstream &&
git fetch >../actual.out 2>../actual.err
) &&
- test_cmp expect.err.2 actual.err &&
- test_cmp expect.out actual.out
+ test_i18ncmp expect.err.2 actual.err &&
+ test_i18ncmp expect.out actual.out
'
test_expect_success "'--recurse-submodules=on-demand' doesn't recurse when no new commits are fetched in the superproject (and ignores config)" '
git config --unset -f .gitmodules submodule.deepsubmodule.fetchRecursive
)
) &&
- test_cmp expect.out actual.out &&
- test_cmp expect.err actual.err
+ test_i18ncmp expect.out actual.out &&
+ test_i18ncmp expect.err actual.err
'
test_expect_success "'--recurse-submodules=on-demand' stops when no new submodule commits are found in the superproject (and ignores config)" '
git fetch --recurse-submodules=on-demand >../actual.out 2>../actual.err
) &&
! test -s actual.out &&
- test_cmp expect.err.file actual.err
+ test_i18ncmp expect.err.file actual.err
'
test_expect_success "'fetch.recurseSubmodules=on-demand' overrides global config" '
cd downstream &&
git config --unset fetch.recurseSubmodules
) &&
- test_cmp expect.out.sub actual.out &&
- test_cmp expect.err.2 actual.err
+ test_i18ncmp expect.out.sub actual.out &&
+ test_i18ncmp expect.err.2 actual.err
'
test_expect_success "'submodule.<sub>.fetchRecurseSubmodules=on-demand' overrides fetch.recurseSubmodules" '
cd downstream &&
git config --unset submodule.submodule.fetchRecurseSubmodules
) &&
- test_cmp expect.out.sub actual.out &&
- test_cmp expect.err.2 actual.err
+ test_i18ncmp expect.out.sub actual.out &&
+ test_i18ncmp expect.err.2 actual.err
'
test_expect_success "don't fetch submodule when newly recorded commits are already present" '
git fetch >../actual.out 2>../actual.err
) &&
! test -s actual.out &&
- test_cmp expect.err actual.err
+ test_i18ncmp expect.err actual.err
'
test_done
--- /dev/null
+#!/bin/sh
+
+test_description='fetching via git:// using core.gitproxy'
+. ./test-lib.sh
+
+test_expect_success 'setup remote repo' '
+ git init remote &&
+ (cd remote &&
+ echo content >file &&
+ git add file &&
+ git commit -m one
+ )
+'
+
+cat >proxy <<'EOF'
+#!/bin/sh
+echo >&2 "proxying for $*"
+cmd=`perl -e '
+ read(STDIN, $buf, 4);
+ my $n = hex($buf) - 4;
+ read(STDIN, $buf, $n);
+ my ($cmd, $other) = split /\0/, $buf;
+ # drop absolute-path on repo name
+ $cmd =~ s{ /}{ };
+ print $cmd;
+'`
+echo >&2 "Running '$cmd'"
+exec $cmd
+EOF
+chmod +x proxy
+test_expect_success 'setup local repo' '
+ git remote add fake git://example.com/remote &&
+ git config core.gitproxy ./proxy
+'
+
+test_expect_success 'fetch through proxy works' '
+ git fetch fake &&
+ echo one >expect &&
+ git log -1 --format=%s FETCH_HEAD >actual &&
+ test_cmp expect actual
+'
+
+test_done
grep "^ ! \[rejected\] *master -> retsam (non-fast-forward)$" output
'
-test_expect_success C_LOCALE_OUTPUT 'push fails for non-fast-forward refs unmatched by remote helper: our output' '
- grep "To prevent you from losing history, non-fast-forward updates were rejected" \
+test_expect_success 'push fails for non-fast-forward refs unmatched by remote helper: our output' '
+ test_i18ngrep "To prevent you from losing history, non-fast-forward updates were rejected" \
output
'
test_expect_success 'clone separate gitdir' '
rm -rf dst &&
git clone --separate-git-dir realgitdir src dst &&
- echo "gitdir: `pwd`/realgitdir" >expected &&
- test_cmp expected dst/.git &&
test -d realgitdir/refs
'
+test_expect_success 'clone separate gitdir: output' '
+ echo "gitdir: `pwd`/realgitdir" >expected &&
+ test_cmp expected dst/.git
+'
+
test_expect_success 'clone separate gitdir where target already exists' '
rm -rf dst &&
test_must_fail git clone --separate-git-dir realgitdir src dst
check side-3 ^side-2
check side-3 ^side-2 -- file-1
+test_expect_success 'not only --stdin' '
+ cat >expect <<-EOF &&
+ 7
+
+ file-1
+ file-2
+ EOF
+ cat >input <<-EOF &&
+ ^master^
+ --
+ file-2
+ EOF
+ git log --pretty=tformat:%s --name-only --stdin master -- file-1 \
+ <input >actual &&
+ test_cmp expect actual
+'
+
test_done
b4 ahead 2
EOF
-test_expect_success C_LOCALE_OUTPUT 'branch -v' '
+test_expect_success 'branch -v' '
(
cd test &&
git branch -v
) |
sed -n -e "$script" >actual &&
- test_cmp expect actual
+ test_i18ncmp expect actual
'
test_expect_success 'checkout' '
warning: tag 'A' is really 'Q' here
EOF
check_describe A-* HEAD
-test_expect_success C_LOCALE_OUTPUT 'warning was displayed for Q' '
- test_cmp err.expect err.actual
+test_expect_success 'warning was displayed for Q' '
+ test_i18ncmp err.expect err.actual
'
test_expect_success 'rename tag Q back to A' '
mv .git/refs/tags/Q .git/refs/tags/A
! (GIT_EDITOR=cat git tag -a initial-comment > actual)
'
-test_expect_success \
- C_LOCALE_OUTPUT \
- 'message in editor has initial comment: first line' '
+test_expect_success 'message in editor has initial comment: first line' '
# check the first line --- should be empty
echo >first.expect &&
sed -e 1q <actual >first.actual &&
- test_cmp first.expect first.actual
+ test_i18ncmp first.expect first.actual
'
test_expect_success \
Would remove expected
Would remove result
EOF
-test_expect_success C_LOCALE_OUTPUT 'git-clean, absent case' '
+test_expect_success 'git-clean, absent case' '
setup_absent &&
git clean -n > result &&
- test_cmp expected result
+ test_i18ncmp expected result
'
-test_expect_success C_LOCALE_OUTPUT 'git-clean, dirty case' '
+test_expect_success 'git-clean, dirty case' '
setup_dirty &&
git clean -n > result &&
- test_cmp expected result
+ test_i18ncmp expected result
'
#TODO test_expect_failure 'git-apply adds file' false
no changes added to commit (use "git add" and/or "git commit -a")
EOF
-test_expect_success C_LOCALE_OUTPUT 'M/D conflict does not segfault' '
+test_expect_success 'M/D conflict does not segfault' '
mkdir mdconflict &&
(
cd mdconflict &&
git commit -m delete &&
test_must_fail git merge master &&
test_must_fail git commit --dry-run >../actual &&
- test_cmp ../expect ../actual &&
+ test_i18ncmp ../expect ../actual &&
git status >../actual &&
- test_cmp ../expect ../actual
+ test_i18ncmp ../expect ../actual
)
'
M file2
EOF
-test_expect_success C_LOCALE_OUTPUT '--mixed refreshes the index' '
+test_expect_success '--mixed refreshes the index' '
echo 123 >> file2 &&
git reset --mixed HEAD > output &&
- test_cmp expect output
+ test_i18ncmp expect output
'
test_expect_success 'disambiguation (1)' '
# working index HEAD target working index HEAD
# ----------------------------------------------------
# file1: X U B C --keep (disallowed)
-test_expect_success C_LOCALE_OUTPUT '"reset --keep HEAD^" fails with pending merge' '
+test_expect_success '"reset --keep HEAD^" fails with pending merge' '
git reset --hard third &&
test_must_fail git merge branch1 &&
test_must_fail git reset --keep HEAD^ 2>err.log &&
- grep "middle of a merge" err.log
+ test_i18ngrep "middle of a merge" err.log
'
# The next test will test the following:
# working index HEAD target working index HEAD
# ----------------------------------------------------
# file1: X U B B --keep (disallowed)
-test_expect_success C_LOCALE_OUTPUT '"reset --keep HEAD" fails with pending merge' '
+test_expect_success '"reset --keep HEAD" fails with pending merge' '
git reset --hard third &&
test_must_fail git merge branch1 &&
test_must_fail git reset --keep HEAD 2>err.log &&
- grep "middle of a merge" err.log
+ test_i18ngrep "middle of a merge" err.log
'
test_expect_success '--merge is ok with added/deleted merge' '
git diff --exit-code --cached
'
-test_expect_success C_LOCALE_OUTPUT '--keep fails with added/deleted merge' '
+test_expect_success '--keep fails with added/deleted merge' '
git reset --hard third &&
rm -f file2 &&
test_must_fail git merge branch3 &&
git diff --exit-code file3 &&
git diff --exit-code branch3 file3 &&
test_must_fail git reset --keep HEAD 2>err.log &&
- grep "middle of a merge" err.log
+ test_i18ngrep "middle of a merge" err.log
'
test_done
test_cmp two expect
'
-test_expect_success C_LOCALE_OUTPUT 'checkout to detach HEAD (with advice declined)' '
+test_expect_success 'checkout to detach HEAD (with advice declined)' '
git config advice.detachedHead false &&
git checkout -f renamer && git clean -f &&
git checkout renamer^ 2>messages &&
- grep "HEAD is now at 7329388" messages &&
+ test_i18ngrep "HEAD is now at 7329388" messages &&
test 1 -eq $(wc -l <messages) &&
H=$(git rev-parse --verify HEAD) &&
M=$(git show-ref -s --verify refs/heads/master) &&
fi
'
-test_expect_success C_LOCALE_OUTPUT 'checkout to detach HEAD' '
+test_expect_success 'checkout to detach HEAD' '
git config advice.detachedHead true &&
git checkout -f renamer && git clean -f &&
git checkout renamer^ 2>messages &&
- grep "HEAD is now at 7329388" messages &&
+ test_i18ngrep "HEAD is now at 7329388" messages &&
test 1 -lt $(wc -l <messages) &&
H=$(git rev-parse --verify HEAD) &&
M=$(git show-ref -s --verify refs/heads/master) &&
fi
'
-test_expect_success C_LOCALE_OUTPUT 'checkout to detach HEAD with branchname^' '
+test_expect_success 'checkout to detach HEAD with branchname^' '
git checkout -f master && git clean -f &&
git checkout renamer^ &&
fi
'
-test_expect_success C_LOCALE_OUTPUT 'checkout to detach HEAD with :/message' '
+test_expect_success 'checkout to detach HEAD with :/message' '
git checkout -f master && git clean -f &&
git checkout ":/Initial" &&
fi
'
-test_expect_success C_LOCALE_OUTPUT 'checkout to detach HEAD with HEAD^0' '
+test_expect_success 'checkout to detach HEAD with HEAD^0' '
git checkout -f master && git clean -f &&
git checkout HEAD^0 &&
printf "%s" "$(git log --pretty=format:%s%b -1)" >$expect &&
printf "%s" "$1" >$actual &&
- test_cmp $expect $actual
+ test_i18ncmp $expect $actual
}
# A sanity check to see if commit is working at all.
)
'
-test_expect_success C_LOCALE_OUTPUT 'adding real content to a template should commit' '
+test_expect_success 'adding real content to a template should commit' '
(
test_set_editor "$TEST_DIRECTORY"/t7500/add-content &&
git commit --template "$TEMPLATE"
commit_msg_is "template linecommit message"
'
-test_expect_success C_LOCALE_OUTPUT '-t option should be short for --template' '
+test_expect_success '-t option should be short for --template' '
echo "short template" > "$TEMPLATE" &&
echo "new content" >> foo &&
git add foo &&
commit_msg_is "short templatecommit message"
'
-test_expect_success C_LOCALE_OUTPUT 'config-specified template should commit' '
+test_expect_success 'config-specified template should commit' '
echo "new template" > "$TEMPLATE" &&
git config commit.template "$TEMPLATE" &&
echo "more content" >> foo &&
commit_msg_is "squash! edited commit"
'
-test_expect_success C_LOCALE_OUTPUT 'commit --squash works with editor' '
+test_expect_success 'commit --squash works with editor' '
commit_for_rebase_autosquash_setup &&
test_set_editor "$TEST_DIRECTORY"/t7500/add-content &&
git commit --squash HEAD~1 &&
"echo 'bongo bongo' >file &&
git add file"
-test_expect_success C_LOCALE_OUTPUT \
- "Constructing initial commit" \
- "git status | grep 'Initial commit'"
+test_expect_success "Constructing initial commit" '
+ git status >actual &&
+ test_i18ngrep "Initial commit" actual
+'
test_expect_success \
"fail initial amend" \
SUMMARY_POSTFIX="$(git log -1 --pretty='format:%h')"
echo "[$SUMMARY_PREFIX $SUMMARY_POSTFIX] $2" >exp &&
- if test_have_prereq C_LOCALE_OUTPUT
- then
- test_cmp exp act
- fi
+ test_i18ncmp exp act
}
test_expect_success 'output summary format' '
# Please enter the commit message for your changes. Lines starting
# with '#' will be ignored, and an empty message aborts the commit." >expect
-test_expect_success C_LOCALE_OUTPUT 'cleanup commit messages (strip,-F,-e): output' '
- test_cmp expect actual
+test_expect_success 'cleanup commit messages (strip,-F,-e): output' '
+ test_i18ncmp expect actual
'
echo "#
# Author: $GIT_AUTHOR_NAME <$GIT_AUTHOR_EMAIL>
#" >> expect
-test_expect_success C_LOCALE_OUTPUT 'author different from committer' '
-
+test_expect_success 'author different from committer' '
echo >>negative &&
- git commit -e -m "sample"
- head -n 7 .git/COMMIT_EDITMSG >actual
-'
-
-test_expect_success C_LOCALE_OUTPUT 'author different from committer: output' '
- test_cmp expect actual
+ test_might_fail git commit -e -m "sample" &&
+ head -n 7 .git/COMMIT_EDITMSG >actual &&
+ test_i18ncmp expect actual
'
mv expect expect.tmp
echo "# Committer:
#" >> expect
-test_expect_success C_LOCALE_OUTPUT 'committer is automatic' '
+test_expect_success 'committer is automatic' '
echo >>negative &&
(
) &&
head -n 8 .git/COMMIT_EDITMSG | \
sed "s/^# Committer: .*/# Committer:/" >actual
-'
-
-test_expect_success C_LOCALE_OUTPUT 'committer is automatic: output' '
- test_cmp expect actual
+ test_i18ncmp expect actual
'
pwd=`pwd`
GIT_EDITOR=.git/FAKE_EDITOR git commit -a $* $use_template &&
case "$use_template" in
'')
- ! grep "^## Custom template" .git/COMMIT_EDITMSG ;;
+ test_i18ngrep ! "^## Custom template" .git/COMMIT_EDITMSG ;;
*)
- grep "^## Custom template" .git/COMMIT_EDITMSG ;;
+ test_i18ngrep "^## Custom template" .git/COMMIT_EDITMSG ;;
esac
}
try_commit_status_combo () {
- test_expect_success C_LOCALE_OUTPUT 'commit' '
+ test_expect_success 'commit' '
clear_config commit.status &&
try_commit "" &&
- grep "^# Changes to be committed:" .git/COMMIT_EDITMSG
+ test_i18ngrep "^# Changes to be committed:" .git/COMMIT_EDITMSG
'
- test_expect_success C_LOCALE_OUTPUT 'commit' '
+ test_expect_success 'commit' '
clear_config commit.status &&
try_commit "" &&
- grep "^# Changes to be committed:" .git/COMMIT_EDITMSG
+ test_i18ngrep "^# Changes to be committed:" .git/COMMIT_EDITMSG
'
- test_expect_success C_LOCALE_OUTPUT 'commit --status' '
+ test_expect_success 'commit --status' '
clear_config commit.status &&
try_commit --status &&
- grep "^# Changes to be committed:" .git/COMMIT_EDITMSG
+ test_i18ngrep "^# Changes to be committed:" .git/COMMIT_EDITMSG
'
- test_expect_success C_LOCALE_OUTPUT 'commit --no-status' '
+ test_expect_success 'commit --no-status' '
clear_config commit.status &&
try_commit --no-status &&
- ! grep "^# Changes to be committed:" .git/COMMIT_EDITMSG
+ test_i18ngrep ! "^# Changes to be committed:" .git/COMMIT_EDITMSG
'
- test_expect_success C_LOCALE_OUTPUT 'commit with commit.status = yes' '
+ test_expect_success 'commit with commit.status = yes' '
clear_config commit.status &&
git config commit.status yes &&
try_commit "" &&
- grep "^# Changes to be committed:" .git/COMMIT_EDITMSG
+ test_i18ngrep "^# Changes to be committed:" .git/COMMIT_EDITMSG
'
- test_expect_success C_LOCALE_OUTPUT 'commit with commit.status = no' '
+ test_expect_success 'commit with commit.status = no' '
clear_config commit.status &&
git config commit.status no &&
try_commit "" &&
- ! grep "^# Changes to be committed:" .git/COMMIT_EDITMSG
+ test_i18ngrep ! "^# Changes to be committed:" .git/COMMIT_EDITMSG
'
- test_expect_success C_LOCALE_OUTPUT 'commit --status with commit.status = yes' '
+ test_expect_success 'commit --status with commit.status = yes' '
clear_config commit.status &&
git config commit.status yes &&
try_commit --status &&
- grep "^# Changes to be committed:" .git/COMMIT_EDITMSG
+ test_i18ngrep "^# Changes to be committed:" .git/COMMIT_EDITMSG
'
- test_expect_success C_LOCALE_OUTPUT 'commit --no-status with commit.status = yes' '
+ test_expect_success 'commit --no-status with commit.status = yes' '
clear_config commit.status &&
git config commit.status yes &&
try_commit --no-status &&
- ! grep "^# Changes to be committed:" .git/COMMIT_EDITMSG
+ test_i18ngrep ! "^# Changes to be committed:" .git/COMMIT_EDITMSG
'
- test_expect_success C_LOCALE_OUTPUT 'commit --status with commit.status = no' '
+ test_expect_success 'commit --status with commit.status = no' '
clear_config commit.status &&
git config commit.status no &&
try_commit --status &&
- grep "^# Changes to be committed:" .git/COMMIT_EDITMSG
+ test_i18ngrep "^# Changes to be committed:" .git/COMMIT_EDITMSG
'
- test_expect_success C_LOCALE_OUTPUT 'commit --no-status with commit.status = no' '
+ test_expect_success 'commit --no-status with commit.status = no' '
clear_config commit.status &&
git config commit.status no &&
try_commit --no-status &&
- ! grep "^# Changes to be committed:" .git/COMMIT_EDITMSG
+ test_i18ngrep ! "^# Changes to be committed:" .git/COMMIT_EDITMSG
'
}
git commit -m "Add submodule sub"
'
-test_expect_success C_LOCALE_OUTPUT 'status clean' '
+test_expect_success 'status clean' '
git status >output &&
- grep "nothing to commit" output
+ test_i18ngrep "nothing to commit" output
'
-test_expect_success C_LOCALE_OUTPUT 'commit --dry-run -a clean' '
+test_expect_success 'commit --dry-run -a clean' '
test_must_fail git commit --dry-run -a >output &&
- grep "nothing to commit" output
+ test_i18ngrep "nothing to commit" output
'
-test_expect_success C_LOCALE_OUTPUT 'status with modified file in submodule' '
+test_expect_success 'status with modified file in submodule' '
(cd sub && git reset --hard) &&
echo "changed" >sub/foo &&
git status >output &&
- grep "modified: sub (modified content)" output
+ test_i18ngrep "modified: sub (modified content)" output
'
test_expect_success 'status with modified file in submodule (porcelain)' '
EOF
'
-test_expect_success C_LOCALE_OUTPUT 'status with added file in submodule' '
+test_expect_success 'status with added file in submodule' '
(cd sub && git reset --hard && echo >foo && git add foo) &&
git status >output &&
- grep "modified: sub (modified content)" output
+ test_i18ngrep "modified: sub (modified content)" output
'
test_expect_success 'status with added file in submodule (porcelain)' '
EOF
'
-test_expect_success C_LOCALE_OUTPUT 'status with untracked file in submodule' '
+test_expect_success 'status with untracked file in submodule' '
(cd sub && git reset --hard) &&
echo "content" >sub/new-file &&
git status >output &&
- grep "modified: sub (untracked content)" output
+ test_i18ngrep "modified: sub (untracked content)" output
'
-test_expect_success C_LOCALE_OUTPUT 'status -uno with untracked file in submodule' '
+test_expect_success 'status -uno with untracked file in submodule' '
git status -uno >output &&
- grep "^nothing to commit" output
+ test_i18ngrep "^nothing to commit" output
'
test_expect_success 'status with untracked file in submodule (porcelain)' '
EOF
'
-test_expect_success C_LOCALE_OUTPUT 'status with added and untracked file in submodule' '
+test_expect_success 'status with added and untracked file in submodule' '
(cd sub && git reset --hard && echo >foo && git add foo) &&
echo "content" >sub/new-file &&
git status >output &&
- grep "modified: sub (modified content, untracked content)" output
+ test_i18ngrep "modified: sub (modified content, untracked content)" output
'
test_expect_success 'status with added and untracked file in submodule (porcelain)' '
EOF
'
-test_expect_success C_LOCALE_OUTPUT 'status with modified file in modified submodule' '
+test_expect_success 'status with modified file in modified submodule' '
(cd sub && git reset --hard) &&
rm sub/new-file &&
(cd sub && echo "next change" >foo && git commit -m "next change" foo) &&
echo "changed" >sub/foo &&
git status >output &&
- grep "modified: sub (new commits, modified content)" output
+ test_i18ngrep "modified: sub (new commits, modified content)" output
'
test_expect_success 'status with modified file in modified submodule (porcelain)' '
EOF
'
-test_expect_success C_LOCALE_OUTPUT 'status with added file in modified submodule' '
+test_expect_success 'status with added file in modified submodule' '
(cd sub && git reset --hard && echo >foo && git add foo) &&
git status >output &&
- grep "modified: sub (new commits, modified content)" output
+ test_i18ngrep "modified: sub (new commits, modified content)" output
'
test_expect_success 'status with added file in modified submodule (porcelain)' '
EOF
'
-test_expect_success C_LOCALE_OUTPUT 'status with untracked file in modified submodule' '
+test_expect_success 'status with untracked file in modified submodule' '
(cd sub && git reset --hard) &&
echo "content" >sub/new-file &&
git status >output &&
- grep "modified: sub (new commits, untracked content)" output
+ test_i18ngrep "modified: sub (new commits, untracked content)" output
'
test_expect_success 'status with untracked file in modified submodule (porcelain)' '
EOF
'
-test_expect_success C_LOCALE_OUTPUT 'status with added and untracked file in modified submodule' '
+test_expect_success 'status with added and untracked file in modified submodule' '
(cd sub && git reset --hard && echo >foo && git add foo) &&
echo "content" >sub/new-file &&
git status >output &&
- grep "modified: sub (new commits, modified content, untracked content)" output
+ test_i18ngrep "modified: sub (new commits, modified content, untracked content)" output
'
test_expect_success 'status with added and untracked file in modified submodule (porcelain)' '
git commit -m "added .real to .gitignore" .gitignore
'
-test_expect_success C_LOCALE_OUTPUT 'status with added file in modified submodule with .git file' '
+test_expect_success 'status with added file in modified submodule with .git file' '
(cd sub && git reset --hard && echo >foo && git add foo) &&
git status >output &&
- grep "modified: sub (new commits, modified content)" output
+ test_i18ngrep "modified: sub (new commits, modified content)" output
'
test_expect_success 'rm submodule contents' '
rm -rf sub/* sub/.git
'
-test_expect_success C_LOCALE_OUTPUT 'status clean (empty submodule dir)' '
+test_expect_success 'status clean (empty submodule dir)' '
git status >output &&
- grep "nothing to commit" output
+ test_i18ngrep "nothing to commit" output
'
-test_expect_success C_LOCALE_OUTPUT 'status -a clean (empty submodule dir)' '
+test_expect_success 'status -a clean (empty submodule dir)' '
test_must_fail git commit --dry-run -a >output &&
- grep "nothing to commit" output
+ test_i18ngrep "nothing to commit" output
'
test_done
echo "[status] showuntrackedfiles = CORRUPT" >>.git/config &&
test_expect_code 129 git status -h >usage 2>&1
) &&
- grep "[Uu]sage" broken/usage
+ test_i18ngrep "[Uu]sage" broken/usage
'
test_expect_success 'commit -h in broken repository' '
echo "[status] showuntrackedfiles = CORRUPT" >>.git/config &&
test_expect_code 129 git commit -h >usage 2>&1
) &&
- grep "[Uu]sage" broken/usage
+ test_i18ngrep "[Uu]sage" broken/usage
'
test_expect_success 'setup' '
git add dir2/added
'
-test_expect_success C_LOCALE_OUTPUT 'status (1)' '
-
- grep "use \"git rm --cached <file>\.\.\.\" to unstage" output
-
+test_expect_success 'status (1)' '
+ test_i18ngrep "use \"git rm --cached <file>\.\.\.\" to unstage" output
'
cat >expect <<\EOF
# untracked
EOF
-test_expect_success C_LOCALE_OUTPUT 'status (2)' '
-
+test_expect_success 'status (2)' '
git status >output &&
- test_cmp expect output
-
+ test_i18ncmp expect output
'
cat >expect <<\EOF
# untracked
EOF
-git config advice.statusHints false
-
-test_expect_success C_LOCALE_OUTPUT 'status (advice.statusHints false)' '
-
+test_expect_success 'status (advice.statusHints false)' '
+ test_when_finished "git config --unset advice.statusHints" &&
+ git config advice.statusHints false &&
git status >output &&
- test_cmp expect output
+ test_i18ncmp expect output
'
-git config --unset advice.statusHints
-
cat >expect <<\EOF
M dir1/modified
A dir2/added
#
# Untracked files not listed (use -u option to show untracked files)
EOF
-test_expect_success C_LOCALE_OUTPUT 'status -uno' '
+test_expect_success 'status -uno' '
git status -uno >output &&
- test_cmp expect output
+ test_i18ncmp expect output
'
-test_expect_success C_LOCALE_OUTPUT 'status (status.showUntrackedFiles no)' '
+test_expect_success 'status (status.showUntrackedFiles no)' '
git config status.showuntrackedfiles no
test_when_finished "git config --unset status.showuntrackedfiles" &&
git status >output &&
- test_cmp expect output
+ test_i18ncmp expect output
'
cat >expect <<EOF
# Untracked files not listed
EOF
git config advice.statusHints false
-test_expect_success C_LOCALE_OUTPUT 'status -uno (advice.statusHints false)' '
+test_expect_success 'status -uno (advice.statusHints false)' '
git status -uno >output &&
- test_cmp expect output
+ test_i18ncmp expect output
'
git config --unset advice.statusHints
# output
# untracked
EOF
-test_expect_success C_LOCALE_OUTPUT 'status -unormal' '
+test_expect_success 'status -unormal' '
git status -unormal >output &&
- test_cmp expect output
+ test_i18ncmp expect output
'
-test_expect_success C_LOCALE_OUTPUT 'status (status.showUntrackedFiles normal)' '
+test_expect_success 'status (status.showUntrackedFiles normal)' '
git config status.showuntrackedfiles normal
test_when_finished "git config --unset status.showuntrackedfiles" &&
git status >output &&
- test_cmp expect output
+ test_i18ncmp expect output
'
cat >expect <<EOF
# output
# untracked
EOF
-test_expect_success C_LOCALE_OUTPUT 'status -uall' '
+test_expect_success 'status -uall' '
git status -uall >output &&
- test_cmp expect output
+ test_i18ncmp expect output
'
-test_expect_success C_LOCALE_OUTPUT 'status (status.showUntrackedFiles all)' '
+
+test_expect_success 'status (status.showUntrackedFiles all)' '
git config status.showuntrackedfiles all
test_when_finished "git config --unset status.showuntrackedfiles" &&
git status >output &&
- test_cmp expect output
+ test_i18ncmp expect output
'
test_expect_success 'teardown dir3' '
# ../untracked
EOF
-test_expect_success C_LOCALE_OUTPUT 'status with relative paths' '
-
+test_expect_success 'status with relative paths' '
(cd dir1 && git status) >output &&
- test_cmp expect output
-
+ test_i18ncmp expect output
'
cat >expect <<\EOF
# <BLUE>untracked<RESET>
EOF
-test_expect_success C_LOCALE_OUTPUT 'status with color.ui' '
-
+test_expect_success 'status with color.ui' '
git config color.ui always &&
test_when_finished "git config --unset color.ui" &&
git status | test_decode_color >output &&
- test_cmp expect output
-
+ test_i18ncmp expect output
'
-test_expect_success C_LOCALE_OUTPUT 'status with color.status' '
-
+test_expect_success 'status with color.status' '
git config color.status always &&
test_when_finished "git config --unset color.status" &&
git status | test_decode_color >output &&
- test_cmp expect output
-
+ test_i18ncmp expect output
'
cat >expect <<\EOF
EOF
-test_expect_success C_LOCALE_OUTPUT 'status without relative paths' '
+test_expect_success 'status without relative paths' '
git config status.relativePaths false &&
test_when_finished "git config --unset status.relativePaths" &&
(cd dir1 && git status) >output &&
- test_cmp expect output
+ test_i18ncmp expect output
'
# untracked
EOF
test_expect_success 'dry-run of partial commit excluding new file in index' '
- git commit --dry-run dir1/modified >output
-'
-
-test_expect_success C_LOCALE_OUTPUT 'dry-run of partial commit excluding new file in index: output' '
- test_cmp expect output
+ git commit --dry-run dir1/modified >output &&
+ test_i18ncmp expect output
'
cat >expect <<EOF
# output
# untracked
EOF
-test_expect_success C_LOCALE_OUTPUT 'status submodule summary is disabled by default' '
+test_expect_success 'status submodule summary is disabled by default' '
git status >output &&
- test_cmp expect output
+ test_i18ncmp expect output
'
# we expect the same as the previous test
-test_expect_success C_LOCALE_OUTPUT 'status --untracked-files=all does not show submodule' '
+test_expect_success 'status --untracked-files=all does not show submodule' '
git status --untracked-files=all >output &&
- test_cmp expect output
+ test_i18ncmp expect output
'
cat >expect <<EOF
# output
# untracked
EOF
-test_expect_success C_LOCALE_OUTPUT 'status submodule summary' '
+test_expect_success 'status submodule summary' '
git config status.submodulesummary 10 &&
git status >output &&
- test_cmp expect output
+ test_i18ncmp expect output
'
cat >expect <<EOF
no changes added to commit (use "git add" and/or "git commit -a")
EOF
test_expect_success 'status submodule summary (clean submodule): commit' '
- git commit -m "commit submodule"
-'
-
-test_expect_success C_LOCALE_OUTPUT 'status submodule summary (clean submodule): output' '
+ git commit -m "commit submodule" &&
git config status.submodulesummary 10 &&
test_must_fail git commit --dry-run >output &&
- test_cmp expect output &&
+ test_i18ncmp expect output &&
git status >output &&
- test_cmp expect output
+ test_i18ncmp expect output
'
cat >expect <<EOF
# output
# untracked
EOF
-test_expect_success C_LOCALE_OUTPUT 'commit --dry-run submodule summary (--amend)' '
+test_expect_success 'commit --dry-run submodule summary (--amend)' '
git config status.submodulesummary 10 &&
git commit --dry-run --amend >output &&
- test_cmp expect output
+ test_i18ncmp expect output
'
test_expect_success POSIXPERM,SANITY 'status succeeds in a read-only repository' '
# untracked
EOF
-test_expect_success C_LOCALE_OUTPUT '--ignore-submodules=untracked suppresses submodules with untracked content' '
- echo modified > sm/untracked &&
- git status --ignore-submodules=untracked > output &&
- test_cmp expect output
+test_expect_success '--ignore-submodules=untracked suppresses submodules with untracked content' '
+ echo modified sm/untracked &&
+ git status --ignore-submodules=untracked >output &&
+ test_i18ncmp expect output
'
-test_expect_success C_LOCALE_OUTPUT '.gitmodules ignore=untracked suppresses submodules with untracked content' '
+test_expect_success '.gitmodules ignore=untracked suppresses submodules with untracked content' '
git config diff.ignoreSubmodules dirty &&
git status >output &&
- test_cmp expect output &&
+ test_i18ncmp expect output &&
git config --add -f .gitmodules submodule.subname.ignore untracked &&
git config --add -f .gitmodules submodule.subname.path sm &&
- git status > output &&
- test_cmp expect output &&
+ git status >output &&
+ test_i18ncmp expect output &&
git config -f .gitmodules --remove-section submodule.subname &&
git config --unset diff.ignoreSubmodules
'
-test_expect_success C_LOCALE_OUTPUT '.git/config ignore=untracked suppresses submodules with untracked content' '
+test_expect_success '.git/config ignore=untracked suppresses submodules with untracked content' '
git config --add -f .gitmodules submodule.subname.ignore none &&
git config --add -f .gitmodules submodule.subname.path sm &&
git config --add submodule.subname.ignore untracked &&
git config --add submodule.subname.path sm &&
- git status > output &&
- test_cmp expect output &&
+ git status >output &&
+ test_i18ncmp expect output &&
git config --remove-section submodule.subname &&
git config --remove-section -f .gitmodules submodule.subname
'
-test_expect_success C_LOCALE_OUTPUT '--ignore-submodules=dirty suppresses submodules with untracked content' '
- git status --ignore-submodules=dirty > output &&
- test_cmp expect output
+test_expect_success '--ignore-submodules=dirty suppresses submodules with untracked content' '
+ git status --ignore-submodules=dirty >output &&
+ test_i18ncmp expect output
'
-test_expect_success C_LOCALE_OUTPUT '.gitmodules ignore=dirty suppresses submodules with untracked content' '
+test_expect_success '.gitmodules ignore=dirty suppresses submodules with untracked content' '
git config diff.ignoreSubmodules dirty &&
git status >output &&
! test -s actual &&
git config --add -f .gitmodules submodule.subname.ignore dirty &&
git config --add -f .gitmodules submodule.subname.path sm &&
- git status > output &&
- test_cmp expect output &&
+ git status >output &&
+ test_i18ncmp expect output &&
git config -f .gitmodules --remove-section submodule.subname &&
git config --unset diff.ignoreSubmodules
'
-test_expect_success C_LOCALE_OUTPUT '.git/config ignore=dirty suppresses submodules with untracked content' '
+test_expect_success '.git/config ignore=dirty suppresses submodules with untracked content' '
git config --add -f .gitmodules submodule.subname.ignore none &&
git config --add -f .gitmodules submodule.subname.path sm &&
git config --add submodule.subname.ignore dirty &&
git config --add submodule.subname.path sm &&
- git status > output &&
- test_cmp expect output &&
+ git status >output &&
+ test_i18ncmp expect output &&
git config --remove-section submodule.subname &&
git config -f .gitmodules --remove-section submodule.subname
'
-test_expect_success C_LOCALE_OUTPUT '--ignore-submodules=dirty suppresses submodules with modified content' '
- echo modified > sm/foo &&
- git status --ignore-submodules=dirty > output &&
- test_cmp expect output
+test_expect_success '--ignore-submodules=dirty suppresses submodules with modified content' '
+ echo modified >sm/foo &&
+ git status --ignore-submodules=dirty >output &&
+ test_i18ncmp expect output
'
-test_expect_success C_LOCALE_OUTPUT '.gitmodules ignore=dirty suppresses submodules with modified content' '
+test_expect_success '.gitmodules ignore=dirty suppresses submodules with modified content' '
git config --add -f .gitmodules submodule.subname.ignore dirty &&
git config --add -f .gitmodules submodule.subname.path sm &&
- git status > output &&
- test_cmp expect output &&
+ git status >output &&
+ test_i18ncmp expect output &&
git config -f .gitmodules --remove-section submodule.subname
'
-test_expect_success C_LOCALE_OUTPUT '.git/config ignore=dirty suppresses submodules with modified content' '
+test_expect_success '.git/config ignore=dirty suppresses submodules with modified content' '
git config --add -f .gitmodules submodule.subname.ignore none &&
git config --add -f .gitmodules submodule.subname.path sm &&
git config --add submodule.subname.ignore dirty &&
git config --add submodule.subname.path sm &&
- git status > output &&
- test_cmp expect output &&
+ git status >output &&
+ test_i18ncmp expect output &&
git config --remove-section submodule.subname &&
git config -f .gitmodules --remove-section submodule.subname
'
# untracked
EOF
-test_expect_success C_LOCALE_OUTPUT "--ignore-submodules=untracked doesn't suppress submodules with modified content" '
+test_expect_success "--ignore-submodules=untracked doesn't suppress submodules with modified content" '
git status --ignore-submodules=untracked > output &&
- test_cmp expect output
+ test_i18ncmp expect output
'
-test_expect_success C_LOCALE_OUTPUT ".gitmodules ignore=untracked doesn't suppress submodules with modified content" '
+test_expect_success ".gitmodules ignore=untracked doesn't suppress submodules with modified content" '
git config --add -f .gitmodules submodule.subname.ignore untracked &&
git config --add -f .gitmodules submodule.subname.path sm &&
- git status > output &&
- test_cmp expect output &&
+ git status >output &&
+ test_i18ncmp expect output &&
git config -f .gitmodules --remove-section submodule.subname
'
-test_expect_success C_LOCALE_OUTPUT ".git/config ignore=untracked doesn't suppress submodules with modified content" '
+test_expect_success ".git/config ignore=untracked doesn't suppress submodules with modified content" '
git config --add -f .gitmodules submodule.subname.ignore none &&
git config --add -f .gitmodules submodule.subname.path sm &&
git config --add submodule.subname.ignore untracked &&
git config --add submodule.subname.path sm &&
- git status > output &&
- test_cmp expect output &&
+ git status >output &&
+ test_i18ncmp expect output &&
git config --remove-section submodule.subname &&
git config -f .gitmodules --remove-section submodule.subname
'
# untracked
EOF
-test_expect_success C_LOCALE_OUTPUT "--ignore-submodules=untracked doesn't suppress submodule summary" '
+test_expect_success "--ignore-submodules=untracked doesn't suppress submodule summary" '
git status --ignore-submodules=untracked > output &&
- test_cmp expect output
+ test_i18ncmp expect output
'
-test_expect_success C_LOCALE_OUTPUT ".gitmodules ignore=untracked doesn't suppress submodule summary" '
+test_expect_success ".gitmodules ignore=untracked doesn't suppress submodule summary" '
git config --add -f .gitmodules submodule.subname.ignore untracked &&
git config --add -f .gitmodules submodule.subname.path sm &&
- git status > output &&
- test_cmp expect output &&
+ git status >output &&
+ test_i18ncmp expect output &&
git config -f .gitmodules --remove-section submodule.subname
'
-test_expect_success C_LOCALE_OUTPUT ".git/config ignore=untracked doesn't suppress submodule summary" '
+test_expect_success ".git/config ignore=untracked doesn't suppress submodule summary" '
git config --add -f .gitmodules submodule.subname.ignore none &&
git config --add -f .gitmodules submodule.subname.path sm &&
git config --add submodule.subname.ignore untracked &&
git config --add submodule.subname.path sm &&
- git status > output &&
- test_cmp expect output &&
+ git status >output &&
+ test_i18ncmp expect output &&
git config --remove-section submodule.subname &&
git config -f .gitmodules --remove-section submodule.subname
'
-test_expect_success C_LOCALE_OUTPUT "--ignore-submodules=dirty doesn't suppress submodule summary" '
+test_expect_success "--ignore-submodules=dirty doesn't suppress submodule summary" '
git status --ignore-submodules=dirty > output &&
- test_cmp expect output
+ test_i18ncmp expect output
'
-test_expect_success C_LOCALE_OUTPUT ".gitmodules ignore=dirty doesn't suppress submodule summary" '
+test_expect_success ".gitmodules ignore=dirty doesn't suppress submodule summary" '
git config --add -f .gitmodules submodule.subname.ignore dirty &&
git config --add -f .gitmodules submodule.subname.path sm &&
- git status > output &&
- test_cmp expect output &&
+ git status >output &&
+ test_i18ncmp expect output &&
git config -f .gitmodules --remove-section submodule.subname
'
-test_expect_success C_LOCALE_OUTPUT ".git/config ignore=dirty doesn't suppress submodule summary" '
+test_expect_success ".git/config ignore=dirty doesn't suppress submodule summary" '
git config --add -f .gitmodules submodule.subname.ignore none &&
git config --add -f .gitmodules submodule.subname.path sm &&
git config --add submodule.subname.ignore dirty &&
git config --add submodule.subname.path sm &&
- git status > output &&
- test_cmp expect output &&
+ git status >output &&
+ test_i18ncmp expect output &&
git config --remove-section submodule.subname &&
git config -f .gitmodules --remove-section submodule.subname
'
no changes added to commit (use "git add" and/or "git commit -a")
EOF
-test_expect_success C_LOCALE_OUTPUT "--ignore-submodules=all suppresses submodule summary" '
+test_expect_success "--ignore-submodules=all suppresses submodule summary" '
git status --ignore-submodules=all > output &&
- test_cmp expect output
+ test_i18ncmp expect output
'
test_expect_failure '.gitmodules ignore=all suppresses submodule summary' '
test_debug 'git log --graph --decorate --oneline --all'
-test_expect_success C_LOCALE_OUTPUT 'in-index merge' '
+test_expect_success 'in-index merge' '
git reset --hard c0 &&
git merge --no-ff -s resolve c1 >out &&
- grep "Wonderful." out &&
+ test_i18ngrep "Wonderful." out &&
verify_parents $c0 $c1
'
git rm -fr . &&
git checkout --orphan new &&
cp important c0.c &&
- test_must_fail git merge c0 2>out
-'
-
-test_expect_success C_LOCALE_OUTPUT 'will not overwrite untracked file on unborn branch: output' '
- test_cmp out expect
+ test_must_fail git merge c0 2>out &&
+ test_i18ncmp out expect
'
test_expect_success 'will not overwrite untracked file on unborn branch .git/MERGE_HEAD sanity etc.' '
pre_merge_head="$(git rev-parse HEAD)"
test_expect_success 'fails without MERGE_HEAD (unstarted merge)' '
- test_must_fail git merge --abort 2>output
-'
-
-test_expect_success C_LOCALE_OUTPUT 'fails without MERGE_HEAD (unstarted merge): fatal output' '
- grep -q MERGE_HEAD output
+ test_must_fail git merge --abort 2>output &&
+ test_i18ngrep MERGE_HEAD output
'
test_expect_success 'fails without MERGE_HEAD (unstarted merge): .git/MERGE_HEAD sanity' '
test ! -f .git/MERGE_HEAD &&
# Merge successfully completed
post_merge_head="$(git rev-parse HEAD)" &&
- test_must_fail git merge --abort 2>output
-'
-
-test_expect_success C_LOCALE_OUTPUT 'fails without MERGE_HEAD (completed merge): output' '
- grep -q MERGE_HEAD output
+ test_must_fail git merge --abort 2>output &&
+ test_i18ngrep MERGE_HEAD output
'
test_expect_success 'fails without MERGE_HEAD (completed merge): .git/MERGE_HEAD sanity' '
test_cmp empty out
'
-test_expect_success C_LOCALE_OUTPUT 'git grep -O --cached' '
+test_expect_success 'git grep -O --cached' '
test_must_fail git grep --cached -O GREP_PATTERN >out 2>msg &&
- grep open-files-in-pager msg
+ test_i18ngrep open-files-in-pager msg
'
test_expect_success 'git grep -O --no-index' '
test_set_prereq C_LOCALE_OUTPUT
fi
+# Use this instead of test_cmp to compare files that contain expected and
+# actual output from git commands that can be translated. When running
+# under GETTEXT_POISON this pretends that the command produced expected
+# results.
+test_i18ncmp () {
+ test -n "$GETTEXT_POISON" || test_cmp "$@"
+}
+
+# Use this instead of "grep expected-string actual" to see if the
+# output from a git command that can be translated either contains an
+# expected string, or does not contain an unwanted one. When running
+# under GETTEXT_POISON this pretends that the command produced expected
+# results.
+test_i18ngrep () {
+ if test -n "$GETTEXT_POISON"
+ then
+ : # pretend success
+ elif test "x!" = "x$1"
+ then
+ shift
+ ! grep "$@"
+ else
+ grep "$@"
+ fi
+}
+
# test whether the filesystem supports symbolic links
ln -s x y 2>/dev/null && test -h y 2>/dev/null && test_set_prereq SYMLINKS
rm -f y
fprintf(stderr, "FAIL %s\n", argv[1]);
return 1;
}
+ if (!strcmp(argv[1], "run-command"))
+ exit(run_command(&proc));
fprintf(stderr, "check usage\n");
return 1;
continue;
if (!ref->peer_ref)
continue;
- if (!ref->new_sha1 || is_null_sha1(ref->new_sha1))
+ if (is_null_sha1(ref->new_sha1))
continue;
/* Follow symbolic refs (mainly for HEAD). */