You may also specify this configuration several times.
+
Does not have a default value; you must configure this variable to
-enable note rewriting.
+enable note rewriting. Set it to `refs/notes/commits` to enable
+rewriting for the default commit notes.
+
This setting can be overridden with the `GIT_NOTES_REWRITE_REF`
environment variable, which must be a colon separated list of refs or
merge conflicts. It is typically run after 'git merge'.
If one or more <file> parameters are given, the merge tool program will
-be run to resolve differences on each file. If no <file> names are
-specified, 'git mergetool' will run the merge tool program on every file
-with merge conflicts.
+be run to resolve differences on each file (skipping those without
+conflicts). Specifying a directory will include all unresolved files in
+that path. If no <file> names are specified, 'git mergetool' will run
+the merge tool program on every file with merge conflicts.
OPTIONS
-------
-i::
Usually a merge requires the index file as well as the
- files in the working tree are up to date with the
+ files in the working tree to be up to date with the
current head commit, in order not to lose local
changes. This flag disables the check with the working
tree and is meant to be used when creating a merge of
--aggressive::
Usually a three-way merge by 'git read-tree' resolves
the merge for really trivial cases and leaves other
- cases unresolved in the index, so that Porcelains can
+ cases unresolved in the index, so that porcelains can
implement different merge policies. This flag makes the
- command to resolve a few more cases internally:
+ command resolve a few more cases internally:
+
* when one side removes a path and the other side leaves the path
unmodified. The resolution is to remove that path.
* when both sides remove a path. The resolution is to remove that path.
-* when both sides adds a path identically. The resolution
+* when both sides add a path identically. The resolution
is to add that path.
--prefix=<prefix>/::
Keep the current index contents, and read the contents
- of named tree-ish under directory at `<prefix>`. The
+ of the named tree-ish under the directory at `<prefix>`. The
original index file cannot have anything at the path
- `<prefix>` itself,
and have nothing in `<prefix>/`
+ `<prefix>` itself,
nor anything in the `<prefix>/`
directory. Note that the `<prefix>/` value must end
with a slash.
Sparse checkout
---------------
-"Sparse checkout" allows to sparsely populate working directory.
-It uses skip-worktree bit (see linkgit:git-update-index[1]) to tell
-Git whether a file on working directory is worth looking at.
+"Sparse checkout" allows populating the working directory sparsely.
+It uses the skip-worktree bit (see linkgit:git-update-index[1]) to tell
+Git whether a file in the working directory is worth looking at.
-"git read-tree" and other merge-based commands ("git merge", "git
-checkout"...) can help maintaining skip-worktree bitmap and working
+'git read-tree' and other merge-based commands ('git merge', 'git
+checkout'...) can help maintaining the skip-worktree bitmap and working
directory update. `$GIT_DIR/info/sparse-checkout` is used to
-define the skip-worktree reference bitmap. When "git read-tree" needs
-to update working directory, it will reset skip-worktree bit in index
+define the skip-worktree reference bitmap. When 'git read-tree' needs
+to update the working directory, it resets the skip-worktree bit in the index
based on this file, which uses the same syntax as .gitignore files.
-If an entry matches a pattern in this file, skip-worktree will be
-set on that entry. Otherwise, skip-worktree will be unset.
+If an entry matches a pattern in this file, skip-worktree will not be
+set on that entry. Otherwise, skip-worktree will be set.
Then it compares the new skip-worktree value with the previous one. If
-skip-worktree turns from unset to set, it will add the corresponding
-file back. If it turns from set to unset, that file will be removed.
+skip-worktree turns from set to unset, it will add the corresponding
+file back. If it turns from unset to set, that file will be removed.
While `$GIT_DIR/info/sparse-checkout` is usually used to specify what
-files are in. You can also specify what files are _not_ in, using
-negate patterns. For example, to remove file "unwanted":
+files are in, you can also specify what files are _not_ in, using
+negate patterns. For example, to remove the file `unwanted`:
----------------
-*
+/*
!unwanted
----------------
-Another tricky thing is fully repopulating working directory when you
+Another tricky thing is fully repopulating the working directory when you
no longer want sparse checkout. You cannot just disable "sparse
-checkout" because skip-worktree are still in the index and you working
-directory is still sparsely populated. You should re-populate working
+checkout" because skip-worktree bits are still in the index and your working
+directory is still sparsely populated. You should re-populate the working
directory with the `$GIT_DIR/info/sparse-checkout` file content as
follows:
----------------
-*
+/*
----------------
-Then you can disable sparse checkout. Sparse checkout support in "git
-read-tree" and similar commands is disabled by default. You need to
+Then you can disable sparse checkout. Sparse checkout support in 'git
+read-tree' and similar commands is disabled by default. You need to
turn `core.sparseCheckout` on in order to have sparse checkout
support.
"assume unchanged" bit, either before or after you modify them.
In order to set "assume unchanged" bit, use `--assume-unchanged`
-option. To unset, use `--no-assume-unchanged`.
+option. To unset, use `--no-assume-unchanged`. To see which files
+have the "assume unchanged" bit set, use `git ls-files -v`
+(see linkgit:git-ls-files[1]).
The command looks at `core.ignorestat` configuration variable. When
this is true, paths updated with `git update-index paths...` and
SEE ALSO
--------
linkgit:git-config[1],
-linkgit:git-add[1]
+linkgit:git-add[1],
+linkgit:git-ls-files[1]
GIT
---
unsigned char orig_sha1[20];
const char *symref;
- strbuf_addf(&buf, "refs/remotes/%s", rename->old);
+ strbuf_addf(&buf, "refs/remotes/%s/", rename->old);
if (!prefixcmp(refname, buf.buf)) {
item = string_list_append(rename->remote_branches, xstrdup(refname));
symref = resolve_ref(refname, orig_sha1, 1, &flag);
OPT_END()
};
struct remote *oldremote, *newremote;
- struct strbuf buf = STRBUF_INIT, buf2 = STRBUF_INIT, buf3 = STRBUF_INIT;
+ struct strbuf buf = STRBUF_INIT, buf2 = STRBUF_INIT, buf3 = STRBUF_INIT,
+ old_remote_context = STRBUF_INIT;
struct string_list remote_branches = STRING_LIST_INIT_NODUP;
struct rename_info rename;
- int i;
+ int i, refspec_updated = 0;
if (argc != 3)
usage_with_options(builtin_remote_rename_usage, options);
strbuf_addf(&buf, "remote.%s.fetch", rename.new);
if (git_config_set_multivar(buf.buf, NULL, NULL, 1))
return error("Could not remove config section '%s'", buf.buf);
+ strbuf_addf(&old_remote_context, ":refs/remotes/%s/", rename.old);
for (i = 0; i < oldremote->fetch_refspec_nr; i++) {
char *ptr;
strbuf_reset(&buf2);
strbuf_addstr(&buf2, oldremote->fetch_refspec[i]);
- ptr = strstr(buf2.buf, rename.old);
- if (ptr)
- strbuf_splice(&buf2, ptr-buf2.buf, strlen(rename.old),
- rename.new, strlen(rename.new));
+ ptr = strstr(buf2.buf, old_remote_context.buf);
+ if (ptr) {
+ refspec_updated = 1;
+ strbuf_splice(&buf2,
+ ptr-buf2.buf + strlen(":refs/remotes/"),
+ strlen(rename.old), rename.new,
+ strlen(rename.new));
+ } else
+ warning("Not updating non-default fetch respec\n"
+ "\t%s\n"
+ "\tPlease update the configuration manually if necessary.",
+ buf2.buf);
+
if (git_config_set_multivar(buf.buf, buf2.buf, "^$", 0))
return error("Could not append '%s'", buf.buf);
}
}
}
+ if (!refspec_updated)
+ return 0;
+
/*
* First remove symrefs, then rename the rest, finally create
* the new symrefs.
static int match_tz(const char *date, int *offp)
{
char *end;
- int offset = strtoul(date+1, &end, 10);
- int min, hour;
- int n = end - date - 1;
+ int hour = strtoul(date + 1, &end, 10);
+ int n = end - (date + 1);
+ int min = 0;
- min = offset % 100;
- hour = offset / 100;
+ if (n == 4) {
+ /* hhmm */
+ min = hour % 100;
+ hour = hour / 100;
+ } else if (n != 2) {
+ min = 99; /* random crap */
+ } else if (*end == ':') {
+ /* hh:mm? */
+ min = strtoul(end + 1, &end, 10);
+ if (end - (date + 1) != 5)
+ min = 99; /* random crap */
+ } /* otherwise we parsed "hh" */
/*
- * Don't accept any random crap.. At least 3 digits, and
- * a valid minute. We might want to check that the minutes
- * are divisible by 30 or something too.
+ * Don't accept any random crap. Even though some places have
+ * offset larger than 12 hours (e.g. Pacific/Kiritimati is at
+ * UTC+14), there is something wrong if hour part is much
+ * larger than that. We might also want to check that the
+ * minutes are divisible by 15 or something too. (Offset of
+ * Kathmandu, Nepal is UTC+5:45)
*/
- if (min < 60 && n > 2) {
- offset = hour*60+min;
+ if (min < 60 && hour < 24) {
+ int offset = hour * 60 + min;
if (*date == '-')
offset = -offset;
-
*offp = offset;
}
return end - date;
last_status=0
rollup_status=0
-rerere=false
-
-files_to_merge() {
- if test "$rerere" = true
- then
- git rerere remaining
- else
- git ls-files -u | sed -e 's/^[^ ]* //' | sort -u
- fi
-}
-
+files=
if test $# -eq 0 ; then
cd_to_toplevel
if test -e "$GIT_DIR/MERGE_RR"
then
- rerere=true
- fi
-
- files=$(files_to_merge)
- if test -z "$files" ; then
- echo "No files need merging"
- exit 0
+ files=$(git rerere remaining)
+ else
+ files=$(git ls-files -u | sed -e 's/^[^ ]* //' | sort -u)
fi
+else
+ files=$(git ls-files -u -- "$@" | sed -e 's/^[^ ]* //' | sort -u)
+fi
- # Save original stdin
- exec 3<&0
+if test -z "$files" ; then
+ echo "No files need merging"
+ exit 0
+fi
- printf "Merging:\n"
- printf "$files\n"
+printf "Merging:\n"
+printf "$files\n"
- files_to_merge |
- while IFS= read i
- do
- if test $last_status -ne 0; then
- prompt_after_failed_merge <&3 || exit 1
- fi
- printf "\n"
- merge_file "$i" <&3
- last_status=$?
- if test $last_status -ne 0; then
- rollup_status=1
- fi
- done
-else
- while test $# -gt 0; do
- if test $last_status -ne 0; then
- prompt_after_failed_merge || exit 1
- fi
- printf "\n"
- merge_file "$1"
- last_status=$?
- if test $last_status -ne 0; then
- rollup_status=1
- fi
- shift
- done
-fi
+IFS='
+'
+for i in $files
+do
+ if test $last_status -ne 0; then
+ prompt_after_failed_merge || exit 1
+ fi
+ printf "\n"
+ merge_file "$i"
+ last_status=$?
+ if test $last_status -ne 0; then
+ rollup_status=1
+ fi
+done
exit $rollup_status
* and other reasons to not add 'js=1' param at the end of link
* @constant
*/
-var jsExceptionsRe = /[;?]js=[01]$/;
+var jsExceptionsRe = /[;?]js=[01](#.*)?$/;
/**
* Add '?js=1' or ';js=1' to the end of every link in the document
var allLinks = document.getElementsByTagName("a") || document.links;
for (var i = 0, len = allLinks.length; i < len; i++) {
var link = allLinks[i];
- if (!jsExceptionsRe.test(link)) { // =~ /[;?]js=[01]$/;
- link.href +=
- (link.href.indexOf('?') === -1 ? '?' : ';') + 'js=1';
+ if (!jsExceptionsRe.test(link)) {
+ link.href = link.href.replace(/(#|$)/,
+ (link.href.indexOf('?') === -1 ? '?' : ';') + 'js=1$1');
}
}
}
check_parse 2008-02-14 bad
check_parse '2008-02-14 20:30:45' '2008-02-14 20:30:45 +0000'
check_parse '2008-02-14 20:30:45 -0500' '2008-02-14 20:30:45 -0500'
+check_parse '2008-02-14 20:30:45 -0015' '2008-02-14 20:30:45 -0015'
+check_parse '2008-02-14 20:30:45 -5' '2008-02-14 20:30:45 +0000'
+check_parse '2008-02-14 20:30:45 -5:' '2008-02-14 20:30:45 +0000'
+check_parse '2008-02-14 20:30:45 -05' '2008-02-14 20:30:45 -0500'
+check_parse '2008-02-14 20:30:45 -:30' '2008-02-14 20:30:45 +0000'
+check_parse '2008-02-14 20:30:45 -05:00' '2008-02-14 20:30:45 -0500'
check_parse '2008-02-14 20:30:45' '2008-02-14 20:30:45 -0500' EST5
check_approxidate() {
'
+test_expect_success 'rename does not update a non-default fetch refspec' '
+
+ git clone one four.one &&
+ (cd four.one &&
+ git config remote.origin.fetch +refs/heads/*:refs/heads/origin/* &&
+ git remote rename origin upstream &&
+ test "$(git config remote.upstream.fetch)" = "+refs/heads/*:refs/heads/origin/*" &&
+ git rev-parse -q origin/master)
+
+'
+
+test_expect_success 'rename a remote with name part of fetch spec' '
+
+ git clone one four.two &&
+ (cd four.two &&
+ git remote rename origin remote &&
+ git remote rename remote upstream &&
+ test "$(git config remote.upstream.fetch)" = "+refs/heads/*:refs/remotes/upstream/*")
+
+'
+
+test_expect_success 'rename a remote with name prefix of other remote' '
+
+ git clone one four.three &&
+ (cd four.three &&
+ git remote add o git://example.com/repo.git &&
+ git remote rename o upstream &&
+ test "$(git rev-parse origin/master)" = "$(git rev-parse master)")
+
+'
+
cat > remotes_origin << EOF
URL: $(pwd)/one
Push: refs/heads/master:refs/heads/upstream
sub
sub2
Please move or remove them before you can merge.
+Aborting
EOF
test_expect_success 'will not overwrite untracked file in leading path' '
three
two
Please move or remove them before you can merge.
+Aborting
EOF
test_expect_success 'untracked files overwritten by merge (fast and non-fast forward)' '
error: The following untracked working tree files would be overwritten by merge:
five
Please move or remove them before you can merge.
+Aborting
EOF
test_expect_success 'untracked files or local changes ovewritten by merge' '
rep/one
rep/two
Please, commit your changes or stash them before you can switch branches.
+Aborting
EOF
test_expect_success 'cannot switch branches because of local changes' '
rep/one
rep/two
Please, commit your changes or stash them before you can switch branches.
+Aborting
EOF
test_expect_success 'not uptodate file porcelain checkout error' '
rep
rep2
+Aborting
EOF
test_expect_success 'not_uptodate_dir porcelain checkout error' '
test_expect_success 'setup' '
git config rerere.enabled true &&
echo master >file1 &&
+ echo master spaced >"spaced name" &&
echo master file11 >file11 &&
echo master file12 >file12 &&
echo master file13 >file13 &&
git commit -m "Add foo"
) &&
git submodule add git://example.com/submod submod &&
- git add file1 file1[1-4] subdir/file3 .gitmodules submod &&
+ git add file1 "spaced name" file1[1-4] subdir/file3 .gitmodules submod &&
git commit -m "add initial versions" &&
git checkout -b branch1 master &&
git submodule update -N &&
echo branch1 change >file1 &&
echo branch1 newfile >file2 &&
+ echo branch1 spaced >"spaced name" &&
echo branch1 change file11 >file11 &&
echo branch1 change file13 >file13 &&
echo branch1 sub >subdir/file3 &&
git commit -m "Add bar on branch1" &&
git checkout -b submod-branch1
) &&
- git add file1 file11 file13 file2 subdir/file3 submod &&
+ git add file1 "spaced name" file11 file13 file2 subdir/file3 submod &&
git rm file12 &&
git commit -m "branch1 changes" &&
git submodule update -N &&
echo master updated >file1 &&
echo master new >file2 &&
+ echo master updated spaced >"spaced name" &&
echo master updated file12 >file12 &&
echo master updated file14 >file14 &&
echo master new sub >subdir/file3 &&
git commit -m "Add bar on master" &&
git checkout -b submod-master
) &&
- git add file1 file12 file14 file2 subdir/file3 submod &&
+ git add file1 "spaced name" file12 file14 file2 subdir/file3 submod &&
git rm file11 &&
git commit -m "master updates" &&
git checkout -b test1 branch1 &&
git submodule update -N &&
test_must_fail git merge master >/dev/null 2>&1 &&
- ( yes "" | git mergetool file1 >/dev/null 2>&1 ) &&
- ( yes "" | git mergetool file2 >/dev/null 2>&1 ) &&
+ ( yes "" | git mergetool file1 file1 ) &&
+ ( yes "" | git mergetool file2 "spaced name" >/dev/null 2>&1 ) &&
( yes "" | git mergetool subdir/file3 >/dev/null 2>&1 ) &&
( yes "d" | git mergetool file11 >/dev/null 2>&1 ) &&
( yes "d" | git mergetool file12 >/dev/null 2>&1 ) &&
test_must_fail git merge master >/dev/null 2>&1 &&
( yes "" | git mergetool file1 >/dev/null 2>&1 ) &&
( yes "" | git mergetool file2 >/dev/null 2>&1 ) &&
+ ( yes "" | git mergetool "spaced name" >/dev/null 2>&1 ) &&
( yes "" | git mergetool subdir/file3 >/dev/null 2>&1 ) &&
( yes "d" | git mergetool file11 >/dev/null 2>&1 ) &&
( yes "d" | git mergetool file12 >/dev/null 2>&1 ) &&
(
cd subdir &&
( yes "" | git mergetool ../file1 >/dev/null 2>&1 ) &&
- ( yes "" | git mergetool ../file2 >/dev/null 2>&1 ) &&
+ ( yes "" | git mergetool ../file2 ../spaced\ name >/dev/null 2>&1 ) &&
( yes "d" | git mergetool ../file11 >/dev/null 2>&1 ) &&
( yes "d" | git mergetool ../file12 >/dev/null 2>&1 ) &&
( yes "l" | git mergetool ../submod >/dev/null 2>&1 ) &&
git reset --hard
'
+test_expect_success 'mergetool takes partial path' '
+ git config rerere.enabled false &&
+ git checkout -b test12 branch1 &&
+ git submodule update -N &&
+ test_must_fail git merge master &&
+
+ #shouldnt need these lines
+ #( yes "d" | git mergetool file11 >/dev/null 2>&1 ) &&
+ #( yes "d" | git mergetool file12 >/dev/null 2>&1 ) &&
+ #( yes "l" | git mergetool submod >/dev/null 2>&1 ) &&
+ #( yes "" | git mergetool file1 file2 >/dev/null 2>&1 ) &&
+
+ ( yes "" | git mergetool subdir ) &&
+
+ test "$(cat subdir/file3)" = "master new sub" &&
+ git reset --hard
+'
+
test_expect_success 'deleted vs modified submodule' '
git checkout -b test6 branch1 &&
git submodule update -N &&
git checkout -b test6.a test6 &&
test_must_fail git merge master &&
test -n "$(git ls-files -u)" &&
- ( yes "" | git mergetool file1 file2 subdir/file3 >/dev/null 2>&1 ) &&
+ ( yes "" | git mergetool file1 file2 spaced\ name subdir/file3 >/dev/null 2>&1 ) &&
( yes "d" | git mergetool file11 file12 >/dev/null 2>&1 ) &&
( yes "r" | git mergetool submod ) &&
rmdir submod && mv submod-movedaside submod &&
git submodule update -N &&
test_must_fail git merge master &&
test -n "$(git ls-files -u)" &&
- ( yes "" | git mergetool file1 file2 subdir/file3 >/dev/null 2>&1 ) &&
+ ( yes "" | git mergetool file1 file2 spaced\ name subdir/file3 >/dev/null 2>&1 ) &&
( yes "d" | git mergetool file11 file12 >/dev/null 2>&1 ) &&
( yes "l" | git mergetool submod ) &&
test ! -e submod &&
git submodule update -N &&
test_must_fail git merge test6 &&
test -n "$(git ls-files -u)" &&
- ( yes "" | git mergetool file1 file2 subdir/file3 >/dev/null 2>&1 ) &&
+ ( yes "" | git mergetool file1 file2 spaced\ name subdir/file3 >/dev/null 2>&1 ) &&
( yes "d" | git mergetool file11 file12 >/dev/null 2>&1 ) &&
( yes "r" | git mergetool submod ) &&
test ! -e submod &&
git submodule update -N &&
test_must_fail git merge test6 &&
test -n "$(git ls-files -u)" &&
- ( yes "" | git mergetool file1 file2 subdir/file3 >/dev/null 2>&1 ) &&
+ ( yes "" | git mergetool file1 file2 spaced\ name subdir/file3 >/dev/null 2>&1 ) &&
( yes "d" | git mergetool file11 file12 >/dev/null 2>&1 ) &&
( yes "l" | git mergetool submod ) &&
test "$(cat submod/bar)" = "master submodule" &&
git checkout -b test7.a branch1 &&
test_must_fail git merge master &&
test -n "$(git ls-files -u)" &&
- ( yes "" | git mergetool file1 file2 subdir/file3 >/dev/null 2>&1 ) &&
+ ( yes "" | git mergetool file1 file2 spaced\ name subdir/file3 >/dev/null 2>&1 ) &&
( yes "d" | git mergetool file11 file12 >/dev/null 2>&1 ) &&
( yes "r" | git mergetool submod ) &&
rmdir submod && mv submod-movedaside submod &&
git checkout -b test7.b test7 &&
test_must_fail git merge master &&
test -n "$(git ls-files -u)" &&
- ( yes "" | git mergetool file1 file2 subdir/file3 >/dev/null 2>&1 ) &&
+ ( yes "" | git mergetool file1 file2 spaced\ name subdir/file3 >/dev/null 2>&1 ) &&
( yes "d" | git mergetool file11 file12 >/dev/null 2>&1 ) &&
( yes "l" | git mergetool submod ) &&
git submodule update -N &&
git submodule update -N &&
test_must_fail git merge test7 &&
test -n "$(git ls-files -u)" &&
- ( yes "" | git mergetool file1 file2 subdir/file3 >/dev/null 2>&1 ) &&
+ ( yes "" | git mergetool file1 file2 spaced\ name subdir/file3 >/dev/null 2>&1 ) &&
( yes "d" | git mergetool file11 file12 >/dev/null 2>&1 ) &&
( yes "r" | git mergetool submod ) &&
test -d submod.orig &&
git submodule update -N &&
test_must_fail git merge test7 &&
test -n "$(git ls-files -u)" &&
- ( yes "" | git mergetool file1 file2 subdir/file3 >/dev/null 2>&1 ) &&
+ ( yes "" | git mergetool file1 file2 spaced\ name subdir/file3 >/dev/null 2>&1 ) &&
( yes "d" | git mergetool file11 file12 >/dev/null 2>&1 ) &&
( yes "l" | git mergetool submod ) &&
test "$(cat submod/bar)" = "master submodule" &&
test "$(cat submod/file16)" = "not a submodule" &&
rm -rf submod.orig &&
- git reset --hard &&
+ git reset --hard >/dev/null 2>&1 &&
test_must_fail git merge master &&
test -n "$(git ls-files -u)" &&
test ! -e submod.orig &&
( cd submod && git clean -f && git reset --hard ) &&
git submodule update -N &&
test "$(cat submod/bar)" = "master submodule" &&
- git reset --hard && rm -rf submod-movedaside &&
+ git reset --hard >/dev/null 2>&1 && rm -rf submod-movedaside &&
git checkout -b test11.c master &&
git submodule update -N &&
git submodule update -N &&
test "$(cat submod/bar)" = "master submodule" &&
- git reset --hard &&
+ git reset --hard >/dev/null 2>&1 &&
git submodule update -N &&
test_must_fail git merge test11 &&
test -n "$(git ls-files -u)" &&
( yes "r" | git mergetool submod ) &&
test "$(cat submod/file16)" = "not a submodule" &&
- git reset --hard master &&
+ git reset --hard master >/dev/null 2>&1 &&
( cd submod && git clean -f && git reset --hard ) &&
git submodule update -N
'
test_description='git svn handling of root commits in merge ranges'
. ./lib-git-svn.sh
+svn_ver="$(svn --version --quiet)"
+case $svn_ver in
+0.* | 1.[0-4].*)
+ skip_all="skipping git-svn test - SVN too old ($svn_ver)"
+ test_done
+ ;;
+esac
+
test_expect_success 'test handling of root commits in merge ranges' '
mkdir -p init/trunk init/branches init/tags &&
echo "r1" > init/trunk/file.txt &&
# If you want to allow non-ascii filenames set this variable to true.
allownonascii=$(git config hooks.allownonascii)
+# Redirect output to stderr.
+exec 1>&2
+
# Cross platform projects tend to avoid non-ascii filenames; prevent
# them from being added to the repository. We exploit the fact that the
# printable range starts at the space character and ends with tilde.
# Note that the use of brackets around a tr range is ok here, (it's
# even required, for portability to Solaris 10's /usr/bin/tr), since
# the square bracket bytes happen to fall in the designated range.
- test "$(git diff --cached --name-only --diff-filter=A -z $against |
- LC_ALL=C tr -d '[ -~]\0')"
+ test $(git diff --cached --name-only --diff-filter=A -z $against |
+ LC_ALL=C tr -d '[ -~]\0' | wc -c) != 0
then
echo "Error: Attempt to add a non-ascii file name."
echo
exit 1
fi
+# If there are whitespace errors, print the offending file names and fail.
exec git diff-index --check --cached $against --
string_list_clear(rejects, 0);
}
if (something_displayed)
- printf("Aborting\n");
+ fprintf(stderr, "Aborting\n");
}
/*
if (s->ignore_submodule_arg) {
DIFF_OPT_SET(&rev.diffopt, OVERRIDE_SUBMODULE_CONFIG);
handle_ignore_submodules_arg(&rev.diffopt, s->ignore_submodule_arg);
- }
+ }
rev.diffopt.format_callback = wt_status_collect_changed_cb;
rev.diffopt.format_callback_data = s;
init_pathspec(&rev.prune_data, s->pathspec);