cvsserver: Make always-binary mode a config file option

The config option gitcvs.allbinary may be set to force all entries to
get the -kb flag.

In the future the gitattributes system will probably be a more
appropriate way of doing this, but that will easily slot in as the
entries lines sent to the CVS client now have their kopts set via the
function kopts_from_path().

In the interim it might be better to not just have a all-or-nothing
approach, but rather detect based on file extension (or file contents?).
That would slot in easily here as well.  However, I personally prefer
everything to be binary-safe, so I just switch the switch.

Signed-off-by: Andy Parkins <andyparkins@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>

diff --git a/git-cvsserver.perl b/git-cvsserver.perl
index 8db6e23c5517f62de8019a3a4a881adba628a689..1bf892e4c130b20d39e4962595fa9040001d9fad 100755 (executable)
--- a/git-cvsserver.perl
+++ b/git-cvsserver.perl
@@ -374,7 +374,8 @@ sub req_add
 
         print "Checked-in $dirpart\n";
         print "$filename\n";
 
         print "Checked-in $dirpart\n";
         print "$filename\n";

-        print "/$filepart/0///\n";
+        my $kopts = kopts_from_path($filepart);
+        print "/$filepart/0//$kopts/\n";

 
         $addcount++;
     }
 
         $addcount++;
     }


@@ -455,7 +456,8 @@ sub req_remove
 
         print "Checked-in $dirpart\n";
         print "$filename\n";
 
         print "Checked-in $dirpart\n";
         print "$filename\n";

-        print "/$filepart/-1.$wrev///\n";
+        my $kopts = kopts_from_path($filepart);
+        print "/$filepart/-1.$wrev//$kopts/\n";

 
         $rmcount++;
     }
 
         $rmcount++;
     }


@@ -726,7 +728,8 @@ sub req_co
        print $state->{CVSROOT} . "/$module/" . ( defined ( $git->{dir} ) and $git->{dir} ne "./" ? $git->{dir} . "/" : "" ) . "$git->{name}\n";
 
         # this is an "entries" line
        print $state->{CVSROOT} . "/$module/" . ( defined ( $git->{dir} ) and $git->{dir} ne "./" ? $git->{dir} . "/" : "" ) . "$git->{name}\n";
 
         # this is an "entries" line

-        print "/$git->{name}/1.$git->{revision}///\n";
+        my $kopts = kopts_from_path($git->{name});
+        print "/$git->{name}/1.$git->{revision}//$kopts/\n";

         # permissions
         print "u=$git->{mode},g=$git->{mode},o=$git->{mode}\n";
 
         # permissions
         print "u=$git->{mode},g=$git->{mode},o=$git->{mode}\n";
 


@@ -917,8 +920,9 @@ sub req_update
                print $state->{CVSROOT} . "/$state->{module}/$filename\n";
 
                # this is an "entries" line
                print $state->{CVSROOT} . "/$state->{module}/$filename\n";
 
                # this is an "entries" line

-               $log->debug("/$filepart/1.$meta->{revision}///");
-               print "/$filepart/1.$meta->{revision}///\n";
+               my $kopts = kopts_from_path($filepart);
+               $log->debug("/$filepart/1.$meta->{revision}//$kopts/");
+               print "/$filepart/1.$meta->{revision}//$kopts/\n";

 
                # permissions
                $log->debug("SEND : u=$meta->{mode},g=$meta->{mode},o=$meta->{mode}");
 
                # permissions
                $log->debug("SEND : u=$meta->{mode},g=$meta->{mode},o=$meta->{mode}");


@@ -961,8 +965,9 @@ sub req_update
                     print "Update-existing $dirpart\n";
                     $log->debug($state->{CVSROOT} . "/$state->{module}/$filename");
                     print $state->{CVSROOT} . "/$state->{module}/$filename\n";
                     print "Update-existing $dirpart\n";
                     $log->debug($state->{CVSROOT} . "/$state->{module}/$filename");
                     print $state->{CVSROOT} . "/$state->{module}/$filename\n";

-                    $log->debug("/$filepart/1.$meta->{revision}///");
-                    print "/$filepart/1.$meta->{revision}///\n";
+                    my $kopts = kopts_from_path($filepart);
+                    $log->debug("/$filepart/1.$meta->{revision}//$kopts/");
+                    print "/$filepart/1.$meta->{revision}//$kopts/\n";

                 }
             }
             elsif ( $return == 1 )
                 }
             }
             elsif ( $return == 1 )


@@ -975,7 +980,8 @@ sub req_update
                 {
                     print "Update-existing $dirpart\n";
                     print $state->{CVSROOT} . "/$state->{module}/$filename\n";
                 {
                     print "Update-existing $dirpart\n";
                     print $state->{CVSROOT} . "/$state->{module}/$filename\n";

-                    print "/$filepart/1.$meta->{revision}/+//\n";
+                    my $kopts = kopts_from_path($filepart);
+                    print "/$filepart/1.$meta->{revision}/+/$kopts/\n";

                 }
             }
             else
                 }
             }
             else


@@ -1206,7 +1212,8 @@ sub req_ci
         } else {
             print "Checked-in $dirpart\n";
             print "$filename\n";
         } else {
             print "Checked-in $dirpart\n";
             print "$filename\n";

-            print "/$filepart/1.$meta->{revision}///\n";
+            my $kopts = kopts_from_path($filepart);
+            print "/$filepart/1.$meta->{revision}//$kopts/\n";

         }
     }
 
         }
     }
 


@@ -1887,6 +1894,28 @@ sub filecleanup
     return $filename;
 }
 
     return $filename;
 }
 

+# Given a path, this function returns a string containing the kopts
+# that should go into that path's Entries line.  For example, a binary
+# file should get -kb.
+sub kopts_from_path
+{
+       my ($path) = @_;
+
+       # Once it exists, the git attributes system should be used to look up
+       # what attributes apply to this path.
+
+       # Until then, take the setting from the config file
+    unless ( defined ( $cfg->{gitcvs}{allbinary} ) and $cfg->{gitcvs}{allbinary} =~ /^\s*(1|true|yes)\s*$/i )
+    {
+               # Return "" to give no special treatment to any path
+               return "";
+    } else {
+               # Alternatively, to have all files treated as if they are binary (which
+               # is more like git itself), always return the "-kb" option
+               return "-kb";
+    }
+}
+

 package GITCVS::log;
 
 ####
 package GITCVS::log;
 
 ####