Fixes since v1.6.0
------------------
+* "git diff --cc" did not honor content mangling specified by
+ gitattributes and core.autocrlf when reading from the work tree.
+
* "git diff --check" incorrectly detected new trailing blank lines when
whitespace check was in effect.
* "git format-patch" peeked before the beginning of a string when
"format.headers" variable is empty (a misconfiguration).
+* "git help help" did not work correctly.
+
* "git mailinfo" (hence "git am") was unhappy when MIME multipart message
contained garbage after the finishing boundary.
* "git merge" did not refresh the index correctly when a merge resulted in
a fast-forward.
-Contains other various documentation fixes.
+* "git merge" did not resolve a truly trivial merges that can be done
+ without content level merges.
---
-exec >/var/tmp/1
-O=v1.6.0-14-g3a634dc
-echo O=$(git describe maint)
-git shortlog --no-merges $O..maint
+* "git svn dcommit" to a repository with URL that has embedded usernames
+ did not work correctly.
+
+Contains other various documentation fixes.
`EDITOR` environment variables and then finally `vi`.
core.pager::
- The command that git will use to paginate output. Can be overridden
- with the `GIT_PAGER` environment variable.
+ The command that git will use to paginate output. Can
+ be overridden with the `GIT_PAGER` environment
+ variable. Note that git sets the `LESS` environment
+ variable to `FRSX` if it is unset when it runs the
+ pager. One can change these settings by setting the
+ `LESS` variable to some other value or by giving the
+ `core.pager` option a value such as "`less -+FRSX`".
core.whitespace::
A comma separated list of common whitespace problems to
linkgit:git-repack[1].
pager.<cmd>::
- Allows to set your own pager preferences for each command, overriding
- the default. If `\--pager` or `\--no-pager` is specified on the command
- line, it takes precedence over this option.
+ Allows turning on or off pagination of the output of a
+ particular git subcommand when writing to a tty. If
+ `\--paginate` or `\--no-pager` is specified on the command line,
+ it takes precedence over this option. To disable pagination for
+ all commands, set `core.pager` or 'GIT_PAGER' to "`cat`".
pull.octopus::
The default merge strategy to use when pulling multiple branches
given. Set it to `always` if you want this behavior when the
start-point is either a local or remote branch.
+
-If no '-b' option was given, a name will be made up for you, by stripping
-the part up to the first slash of the tracked branch. For example, if you
-called 'git checkout --track origin/next', the branch name will be 'next'.
+If no '-b' option was given, the name of the new branch will be
+derived from the remote branch, by attempting to guess the name
+of the branch on remote system. If "remotes/" or "refs/remotes/"
+are prefixed, it is stripped away, and then the part up to the
+next slash (which would be the nickname of the remote) is removed.
+This would tell us to use "hack" as the local branch when branching
+off of "origin/hack" (or "remotes/origin/hack", or even
+"refs/remotes/origin/hack"). If the given name has no slash, or the above
+guessing results in an empty name, the guessing is aborted. You can
+exlicitly give a name with '-b' in such a case.
--no-track::
Ignore the branch.autosetupmerge configuration variable.
--verbose::
In addition to the number of loose objects and disk
space consumed, it reports the number of in-pack
- objects, number of packs, and number of objects that can be
- removed by running `git prune-packed`.
+ objects, number of packs, disk space consumed by those packs,
+ and number of objects that can be removed by running
+ `git prune-packed`.
Author
--stdin::
When '--stdin' is specified, the command does not take
<tree-ish> arguments from the command line. Instead, it
- reads either one <commit> or a list of <commit>
- separated with a single space from its standard input.
+ reads lines containing either two <tree>, one <commit>, or a
+ list of <commit> from its standard input. (Use a single space
+ as separator.)
+
-When a single commit is given on one line of such input, it compares
-the commit with its parents. The following flags further affects its
-behavior. The remaining commits, when given, are used as if they are
+When two trees are given, it compares the first tree with the second.
+When a single commit is given, it compares the commit with its
+parents. The remaining commits, when given, are used as if they are
parents of the first commit.
++
+When comparing two trees, the ID of both trees (separated by a space
+and terminated by a newline) is printed before the difference. When
+comparing commits, the ID of the first (or only) commit, followed by a
+newline, is printed.
++
+The following flags further affects the behavior when comparing
+commits (but not trees).
-m::
By default, 'git-diff-tree --stdin' does not show
SYNOPSIS
--------
-'git merge-base' [--all] <commit> <commit>
+'git merge-base' [--all] <commit> <commit>...
DESCRIPTION
-----------
-'git-merge-base' finds as good a common ancestor as possible between
-the two commits. That is, given two commits A and B, `git merge-base A
-B` will output a commit which is reachable from both A and B through
-the parent relationship.
+'git-merge-base' finds best common ancestor(s) between two commits to use
+in a three-way merge. One common ancestor is 'better' than another common
+ancestor if the latter is an ancestor of the former. A common ancestor
+that does not have any better common ancestor than it is a 'best common
+ancestor', i.e. a 'merge base'. Note that there can be more than one
+merge bases between two commits.
-Given a selection of equally good common ancestors it should not be
-relied on to decide in any particular way.
-
-The 'git-merge-base' algorithm is still in flux - use the source...
+Among the two commits to compute their merge bases, one is specified by
+the first commit argument on the command line; the other commit is a
+(possibly hypothetical) commit that is a merge across all the remaining
+commits on the command line. As the most common special case, giving only
+two commits from the command line means computing the merge base between
+the given two commits.
OPTIONS
-------
--all::
- Output all common ancestors for the two commits instead of
- just one.
+ Output all merge bases for the commits, instead of just one.
+
+DISCUSSION
+----------
+
+Given two commits 'A' and 'B', `git merge-base A B` will output a commit
+which is reachable from both 'A' and 'B' through the parent relationship.
+
+For example, with this topology:
+
+ o---o---o---B
+ /
+ ---o---1---o---o---o---A
+
+the merge base between 'A' and 'B' is '1'.
+
+Given three commits 'A', 'B' and 'C', `git merge-base A B C` will compute the
+merge base between 'A' and an hypothetical commit 'M', which is a merge
+between 'B' and 'C'. For example, with this topology:
+
+ o---o---o---o---C
+ /
+ / o---o---o---B
+ / /
+ ---2---1---o---o---o---A
+
+the result of `git merge-base A B C` is '1'. This is because the
+equivalent topology with a merge commit 'M' between 'B' and 'C' is:
+
+
+ o---o---o---o---o
+ / \
+ / o---o---o---o---M
+ / /
+ ---2---1---o---o---o---A
+
+and the result of `git merge-base A M` is '1'. Commit '2' is also a
+common ancestor between 'A' and 'M', but '1' is a better common ancestor,
+because '2' is an ancestor of '1'. Hence, '2' is not a merge base.
+
+When the history involves criss-cross merges, there can be more than one
+'best' common ancestors between two commits. For example, with this
+topology:
+
+ ---1---o---A
+ \ /
+ X
+ / \
+ ---2---o---o---B
+
+both '1' and '2' are merge-base of A and B. Neither one is better than
+the other (both are 'best' merge base). When `--all` option is not given,
+it is unspecified which best one is output.
Author
------
up working tree changes made by 2. and 3.; 'git-reset --hard' can
be used for this.
- * Resolve the conflicts. `git diff` would report only the
- conflicting paths because of the above 2. and 3.
- Edit the working tree files into a desirable shape
- ('git mergetool' can ease this task), 'git-add' or 'git-rm'
- them, to make the index file contain what the merge result
- should be, and run 'git-commit' to commit the result.
+ * Resolve the conflicts. Git will mark the conflicts in
+ the working tree. Edit the files into shape and
+ 'git-add' to the index. 'git-commit' to seal the deal.
+You can work through the conflict with a number of tools:
+
+ * Use a mergetool. 'git mergetool' to launch a graphical
+ mergetool which will work you through the merge.
+
+ * Look at the diffs. 'git diff' will show a three-way diff,
+ highlighting changes from both the HEAD and remote versions.
+
+ * Look at the diffs on their own. 'git log --merge -p <path>'
+ will show diffs first for the HEAD version and then the
+ remote version.
+
+ * Look at the originals. 'git show :1:filename' shows the
+ common ancestor, 'git show :2:filename' shows the HEAD
+ version and 'git show :3:filename' shows the remote version.
SEE ALSO
--------
'git submodule' [--quiet] init [--] [<path>...]
'git submodule' [--quiet] update [--init] [--] [<path>...]
'git submodule' [--quiet] summary [--summary-limit <n>] [commit] [--] [<path>...]
+'git submodule' [--quiet] foreach <command>
+'git submodule' [--quiet] sync [--] [<path>...]
DESCRIPTION
in the submodule between the given super project commit and the
index or working tree (switched by --cached) are shown.
+foreach::
+ Evaluates an arbitrary shell command in each checked out submodule.
+ The command has access to the variables $path and $sha1:
+ $path is the name of the submodule directory relative to the
+ superproject, and $sha1 is the commit as recorded in the superproject.
+ Any submodules defined in the superproject but not checked out are
+ ignored by this command. Unless given --quiet, foreach prints the name
+ of each submodule before evaluating the command.
+ A non-zero return from the command in any submodule causes
+ the processing to terminate. This can be overridden by adding '|| :'
+ to the end of the command.
++
+As an example, "git submodule foreach 'echo $path `git rev-parse HEAD`' will
+show the path and currently checked out commit for each submodule.
+
+sync::
+ Synchronizes submodules' remote URL configuration setting
+ to the value specified in .gitmodules. This is useful when
+ submodule URLs change upstream and you need to update your local
+ repositories accordingly.
++
+"git submodule sync" synchronizes all submodules while
+"git submodule sync -- A" synchronizes submodule "A" only.
+
OPTIONS
-------
-q::
branch of the `git.git` repository.
Documentation for older releases are available here:
-* link:v1.6.0/git.html[documentation for release 1.6.0]
+* link:v1.6.1/git.html[documentation for release 1.6.1]
* release notes for
+ link:RelNotes-1.6.1.txt[1.6.1],
link:RelNotes-1.6.0.txt[1.6.0].
* link:v1.5.6.5/git.html[documentation for release 1.5.6.5]
'GIT_PAGER'::
This environment variable overrides `$PAGER`. If it is set
to an empty string or to the value "cat", git will not launch
- a pager.
+ a pager. See also the `core.pager` option in
+ linkgit:git-config[1].
'GIT_SSH'::
If this environment variable is set then 'git-fetch'
- `pascal` suitable for source code in the Pascal/Delphi language.
+- `python` suitable for source code in the Python language.
+
- `ruby` suitable for source code in the Ruby language.
- `tex` suitable for source code for LaTeX documents.
+- `html` suitable for HTML/XHTML documents.
+
Performing a three-way merge
~~~~~~~~~~~~~~~~~~~~~~~~~~~~
export PERL_PATH
LIB_FILE=libgit.a
-COMPAT_LIB = compat/lib.a
XDIFF_LIB=xdiff/lib.a
LIB_H += archive.h
NO_UNSETENV = YesPlease
NO_HSTRERROR = YesPlease
NO_SYS_SELECT_H = YesPlease
+ SNPRINTF_RETURNS_BOGUS = YesPlease
endif
ifneq (,$(findstring MINGW,$(uname_S)))
NO_MMAP = YesPlease
'-DGIT_INFO_PATH="$(infodir_SQ)"' $<
$(BUILT_INS): git$X
- $(QUIET_BUILT_IN)$(RM) $@ && ln git$X $@
+ $(QUIET_BUILT_IN)$(RM) $@ && \
+ ln git$X $@ 2>/dev/null || \
+ ln -s git$X $@ 2>/dev/null || \
+ cp git$X $@
common-cmds.h: ./generate-cmdlist.sh command-list.txt
$(QUIET_LINK)$(CC) $(ALL_CFLAGS) -o $@ $(ALL_LDFLAGS) $(filter %.o,$^) \
$(LIBS) $(CURL_LIBCURL) $(EXPAT_LIBEXPAT)
-$(COMPAT_LIB): $(COMPAT_OBJS)
- $(QUIET_AR)$(RM) $@ && $(AR) rcs $@ $(COMPAT_OBJS)
-
-git-shell$X: abspath.o ctype.o exec_cmd.o quote.o strbuf.o usage.o wrapper.o shell.o $(COMPAT_LIB)
- $(QUIET_LINK)$(CC) $(ALL_CFLAGS) -o $@ $(ALL_LDFLAGS) $(filter %.o,$^) $(COMPAT_LIB)
-
$(LIB_OBJS) $(BUILTIN_OBJS): $(LIB_H)
$(patsubst git-%$X,%.o,$(PROGRAMS)): $(LIB_H) $(wildcard */*.h)
builtin-revert.o wt-status.o: wt-status.h
$(INSTALL) -d -m 755 '$(DESTDIR_SQ)$(bindir_SQ)'
$(INSTALL) -d -m 755 '$(DESTDIR_SQ)$(gitexec_instdir_SQ)'
$(INSTALL) $(ALL_PROGRAMS) '$(DESTDIR_SQ)$(gitexec_instdir_SQ)'
- $(INSTALL) git$X git-upload-pack$X git-receive-pack$X git-upload-archive$X '$(DESTDIR_SQ)$(bindir_SQ)'
+ $(INSTALL) git$X git-upload-pack$X git-receive-pack$X git-upload-archive$X git-shell$X '$(DESTDIR_SQ)$(bindir_SQ)'
$(MAKE) -C templates DESTDIR='$(DESTDIR_SQ)' install
$(MAKE) -C perl prefix='$(prefix_SQ)' DESTDIR='$(DESTDIR_SQ)' install
ifndef NO_TCLTK
endif
bindir=$$(cd '$(DESTDIR_SQ)$(bindir_SQ)' && pwd) && \
execdir=$$(cd '$(DESTDIR_SQ)$(gitexec_instdir_SQ)' && pwd) && \
- if test "z$$bindir" != "z$$execdir"; \
- then \
- ln -f "$$bindir/git$X" "$$execdir/git$X" || \
- cp "$$bindir/git$X" "$$execdir/git$X"; \
- fi && \
- { $(foreach p,$(BUILT_INS), $(RM) "$$execdir/$p" && ln "$$execdir/git$X" "$$execdir/$p" ;) } && \
- if test "z$$bindir" != "z$$execdir"; \
- then \
- $(RM) "$$execdir/git$X"; \
- fi && \
+ { $(RM) "$$execdir/git-add$X" && \
+ ln git-add$X "$$execdir/git-add$X" 2>/dev/null || \
+ cp git-add$X "$$execdir/git-add$X"; } && \
+ { $(foreach p,$(filter-out git-add,$(BUILT_INS)), $(RM) "$$execdir/$p" && \
+ ln "$$execdir/git-add$X" "$$execdir/$p" 2>/dev/null || \
+ ln -s "git-add$X" "$$execdir/$p" 2>/dev/null || \
+ cp "$$execdir/git-add$X" "$$execdir/$p" || exit;) } && \
./check_bindir "z$$bindir" "z$$execdir" "$$bindir/git-add$X"
install-doc:
clean:
$(RM) *.o mozilla-sha1/*.o arm/*.o ppc/*.o compat/*.o xdiff/*.o \
- $(LIB_FILE) $(XDIFF_LIB) $(COMPAT_LIB)
+ $(LIB_FILE) $(XDIFF_LIB)
$(RM) $(ALL_PROGRAMS) $(BUILT_INS) git$X
$(RM) $(TEST_PROGRAMS)
$(RM) *.spec *.pyc *.pyo */*.pyc */*.pyo common-cmds.h TAGS tags cscope*
#include "dir.h"
#include "exec_cmd.h"
#include "cache-tree.h"
-#include "diff.h"
-#include "diffcore.h"
-#include "commit.h"
-#include "revision.h"
#include "run-command.h"
#include "parse-options.h"
static int patch_interactive = 0, add_interactive = 0;
static int take_worktree_changes;
+static void fill_pathspec_matches(const char **pathspec, char *seen, int specs)
+{
+ int num_unmatched = 0, i;
+
+ /*
+ * Since we are walking the index as if we are warlking the directory,
+ * we have to mark the matched pathspec as seen; otherwise we will
+ * mistakenly think that the user gave a pathspec that did not match
+ * anything.
+ */
+ for (i = 0; i < specs; i++)
+ if (!seen[i])
+ num_unmatched++;
+ if (!num_unmatched)
+ return;
+ for (i = 0; i < active_nr; i++) {
+ struct cache_entry *ce = active_cache[i];
+ match_pathspec(pathspec, ce->name, ce_namelen(ce), 0, seen);
+ }
+}
+
static void prune_directory(struct dir_struct *dir, const char **pathspec, int prefix)
{
char *seen;
*dst++ = entry;
}
dir->nr = dst - dir->entries;
+ fill_pathspec_matches(pathspec, seen, specs);
for (i = 0; i < specs; i++) {
if (!seen[i] && !file_exists(pathspec[i]))
prune_directory(dir, pathspec, baselen);
}
-struct update_callback_data
-{
- int flags;
- int add_errors;
-};
-
-static void update_callback(struct diff_queue_struct *q,
- struct diff_options *opt, void *cbdata)
-{
- int i;
- struct update_callback_data *data = cbdata;
-
- for (i = 0; i < q->nr; i++) {
- struct diff_filepair *p = q->queue[i];
- const char *path = p->one->path;
- switch (p->status) {
- default:
- die("unexpected diff status %c", p->status);
- case DIFF_STATUS_UNMERGED:
- case DIFF_STATUS_MODIFIED:
- case DIFF_STATUS_TYPE_CHANGED:
- if (add_file_to_cache(path, data->flags)) {
- if (!(data->flags & ADD_CACHE_IGNORE_ERRORS))
- die("updating files failed");
- data->add_errors++;
- }
- break;
- case DIFF_STATUS_DELETED:
- if (!(data->flags & ADD_CACHE_PRETEND))
- remove_file_from_cache(path);
- if (data->flags & (ADD_CACHE_PRETEND|ADD_CACHE_VERBOSE))
- printf("remove '%s'\n", path);
- break;
- }
- }
-}
-
-int add_files_to_cache(const char *prefix, const char **pathspec, int flags)
-{
- struct update_callback_data data;
- struct rev_info rev;
- init_revisions(&rev, prefix);
- setup_revisions(0, NULL, &rev, NULL);
- rev.prune_data = pathspec;
- rev.diffopt.output_format = DIFF_FORMAT_CALLBACK;
- rev.diffopt.format_callback = update_callback;
- data.flags = flags;
- data.add_errors = 0;
- rev.diffopt.format_callback_data = &data;
- run_diff_files(&rev, DIFF_RACY_IS_MODIFIED);
- return !!data.add_errors;
-}
-
static void refresh(int verbose, const char **pathspec)
{
char *seen;
{
const char **pathspec = get_pathspec(prefix, argv);
+ if (pathspec) {
+ const char **p;
+ for (p = pathspec; *p; p++) {
+ if (has_symlink_leading_path(strlen(*p), *p)) {
+ int len = prefix ? strlen(prefix) : 0;
+ die("'%s' is beyond a symbolic link", *p + len);
+ }
+ }
+ }
+
return pathspec;
}
if (addremove && take_worktree_changes)
die("-A and -u are mutually incompatible");
- if (addremove && !argc) {
+ if ((addremove || take_worktree_changes) && !argc) {
static const char *here[2] = { ".", NULL };
argc = 1;
argv = here;
flags = ((verbose ? ADD_CACHE_VERBOSE : 0) |
(show_only ? ADD_CACHE_PRETEND : 0) |
- (ignore_add_errors ? ADD_CACHE_IGNORE_ERRORS : 0));
+ (ignore_add_errors ? ADD_CACHE_IGNORE_ERRORS : 0) |
+ (!(addremove || take_worktree_changes)
+ ? ADD_CACHE_IGNORE_REMOVAL : 0));
if (require_pathspec && argc == 0) {
fprintf(stderr, "Nothing specified, nothing added.\n");
fprintf(stderr, "Maybe you wanted to say 'git add .'?\n");
return 0;
}
- pathspec = get_pathspec(prefix, argv);
-
- /*
- * If we are adding new files, we need to scan the working
- * tree to find the ones that match pathspecs; this needs
- * to be done before we read the index.
- */
- if (add_new_files)
- fill_directory(&dir, pathspec, ignored_too);
+ pathspec = validate_pathspec(argc, argv, prefix);
if (read_cache() < 0)
die("index file corrupt");
+ if (add_new_files)
+ /* This picks up the paths that are not tracked */
+ fill_directory(&dir, pathspec, ignored_too);
+
if (refresh_only) {
refresh(verbose, pathspec);
goto finish;
}
- if (take_worktree_changes || addremove)
- exit_status |= add_files_to_cache(prefix, pathspec, flags);
+ exit_status |= add_files_to_cache(prefix, pathspec, flags);
if (add_new_files)
exit_status |= add_files(&dir, flags);
int force;
int writeout_error;
- char *new_branch;
+ const char *new_branch;
int new_branch_log;
enum branch_track track;
};
git_config(git_default_config, NULL);
- opts.track = -1;
+ opts.track = BRANCH_TRACK_UNSPECIFIED;
argc = parse_options(argc, argv, options, checkout_usage,
PARSE_OPT_KEEP_DASHDASH);
/* --track without -b should DWIM */
- if (opts.track && opts.track != -1 && !opts.new_branch) {
- char *slash;
- if (!argc || !strcmp(argv[0], "--"))
+ if (0 < opts.track && !opts.new_branch) {
+ const char *argv0 = argv[0];
+ if (!argc || !strcmp(argv0, "--"))
die ("--track needs a branch name");
- slash = strchr(argv[0], '/');
- if (slash && !prefixcmp(argv[0], "refs/"))
- slash = strchr(slash + 1, '/');
- if (slash && !prefixcmp(argv[0], "remotes/"))
- slash = strchr(slash + 1, '/');
- if (!slash || !slash[1])
+ if (!prefixcmp(argv0, "refs/"))
+ argv0 += 5;
+ if (!prefixcmp(argv0, "remotes/"))
+ argv0 += 8;
+ argv0 = strchr(argv0, '/');
+ if (!argv0 || !argv0[1])
die ("Missing branch name; try -b");
- opts.new_branch = slash + 1;
+ opts.new_branch = argv0 + 1;
}
- if (opts.track == -1)
+ if (opts.track == BRANCH_TRACK_UNSPECIFIED)
opts.track = git_branch_track;
if (opts.force && opts.merge)
int commit_tree(const char *msg, unsigned char *tree,
struct commit_list *parents, unsigned char *ret)
{
+ int result;
int encoding_is_utf8;
struct strbuf buffer;
if (encoding_is_utf8 && !is_utf8(buffer.buf))
fprintf(stderr, commit_utf8_warn);
- return write_sha1_file(buffer.buf, buffer.len, commit_type, ret);
+ result = write_sha1_file(buffer.buf, buffer.len, commit_type, ret);
+ strbuf_release(&buffer);
+ return result;
}
int cmd_commit_tree(int argc, const char **argv, const char *prefix)
if (verbose) {
struct packed_git *p;
unsigned long num_pack = 0;
+ unsigned long size_pack = 0;
if (!packed_git)
prepare_packed_git();
for (p = packed_git; p; p = p->next) {
if (open_pack_index(p))
continue;
packed += p->num_objects;
+ size_pack += p->pack_size + p->index_size;
num_pack++;
}
printf("count: %lu\n", loose);
printf("size: %lu\n", loose_size / 1024);
printf("in-pack: %lu\n", packed);
printf("packs: %lu\n", num_pack);
+ printf("size-pack: %lu\n", size_pack / 1024);
printf("prune-packable: %lu\n", packed_loose);
printf("garbage: %lu\n", garbage);
}
return log_tree_commit(&log_tree_opt, commit);
}
-static int diff_tree_stdin(char *line)
+/* Diff one or more commits. */
+static int stdin_diff_commit(struct commit *commit, char *line, int len)
{
- int len = strlen(line);
unsigned char sha1[20];
- struct commit *commit;
-
- if (!len || line[len-1] != '\n')
- return -1;
- line[len-1] = 0;
- if (get_sha1_hex(line, sha1))
- return -1;
- commit = lookup_commit(sha1);
- if (!commit || parse_commit(commit))
- return -1;
if (isspace(line[40]) && !get_sha1_hex(line+41, sha1)) {
/* Graft the fake parents locally to the commit */
int pos = 41;
return log_tree_commit(&log_tree_opt, commit);
}
+/* Diff two trees. */
+static int stdin_diff_trees(struct tree *tree1, char *line, int len)
+{
+ unsigned char sha1[20];
+ struct tree *tree2;
+ if (len != 82 || !isspace(line[40]) || get_sha1_hex(line + 41, sha1))
+ return error("Need exactly two trees, separated by a space");
+ tree2 = lookup_tree(sha1);
+ if (!tree2 || parse_tree(tree2))
+ return -1;
+ printf("%s %s\n", sha1_to_hex(tree1->object.sha1),
+ sha1_to_hex(tree2->object.sha1));
+ diff_tree_sha1(tree1->object.sha1, tree2->object.sha1,
+ "", &log_tree_opt.diffopt);
+ log_tree_diff_flush(&log_tree_opt);
+ return 0;
+}
+
+static int diff_tree_stdin(char *line)
+{
+ int len = strlen(line);
+ unsigned char sha1[20];
+ struct object *obj;
+
+ if (!len || line[len-1] != '\n')
+ return -1;
+ line[len-1] = 0;
+ if (get_sha1_hex(line, sha1))
+ return -1;
+ obj = lookup_object(sha1);
+ obj = obj ? obj : parse_object(sha1);
+ if (!obj)
+ return -1;
+ if (obj->type == OBJ_COMMIT)
+ return stdin_diff_commit((struct commit *)obj, line, len);
+ if (obj->type == OBJ_TREE)
+ return stdin_diff_trees((struct tree *)obj, line, len);
+ error("Object %s is a %s, not a commit or tree",
+ sha1_to_hex(sha1), typename(obj->type));
+ return -1;
+}
+
static const char diff_tree_usage[] =
"git diff-tree [--stdin] [-m] [-c] [--cc] [-s] [-v] [--pretty] [-t] [-r] [--root] "
"[<common diff options>] <tree-ish> [<tree-ish>] [<path>...]\n"
for (i = 0; i < idnums.size; i++) {
if (deco->base && deco->base->type == 1) {
mark = ptr_to_mark(deco->decoration);
- fprintf(f, ":%u %s\n", mark, sha1_to_hex(deco->base->sha1));
+ fprintf(f, ":%"PRIu32" %s\n", mark,
+ sha1_to_hex(deco->base->sha1));
}
deco++;
}
if (rev->early_output)
finish_early_output(rev);
+ /*
+ * For --check and --exit-code, the exit code is based on CHECK_FAILED
+ * and HAS_CHANGES being accumulated in rev->diffopt, so be careful to
+ * retain that state information if replacing rev->diffopt in this loop
+ */
while ((commit = get_revision(rev)) != NULL) {
log_tree_commit(rev, commit);
if (!rev->reflog_info) {
free_commit_list(commit->parents);
commit->parents = NULL;
}
- return 0;
+ if (rev->diffopt.output_format & DIFF_FORMAT_CHECKDIFF &&
+ DIFF_OPT_TST(&rev->diffopt, CHECK_FAILED)) {
+ return 02;
+ }
+ return diff_result_code(&rev->diffopt, 0);
}
static int git_log_config(const char *var, const char *value, void *cb)
if (argc > 1)
die ("unrecognized argument: %s", argv[1]);
- if (!rev.diffopt.output_format)
+ if (!rev.diffopt.output_format
+ || rev.diffopt.output_format == DIFF_FORMAT_PATCH)
rev.diffopt.output_format = DIFF_FORMAT_DIFFSTAT | DIFF_FORMAT_SUMMARY | DIFF_FORMAT_PATCH;
if (!DIFF_OPT_TST(&rev.diffopt, TEXT) && !no_binary_diff)
#include "cache.h"
#include "commit.h"
-static int show_merge_base(struct commit *rev1, struct commit *rev2, int show_all)
+static int show_merge_base(struct commit **rev, int rev_nr, int show_all)
{
- struct commit_list *result = get_merge_bases(rev1, rev2, 0);
+ struct commit_list *result;
+
+ result = get_merge_bases_many(rev[0], rev_nr - 1, rev + 1, 0);
if (!result)
return 1;
}
static const char merge_base_usage[] =
-"git merge-base [--all] <commit-id> <commit-id>";
+"git merge-base [--all] <commit-id> <commit-id>...";
static struct commit *get_commit_reference(const char *arg)
{
int cmd_merge_base(int argc, const char **argv, const char *prefix)
{
- struct commit *rev1, *rev2;
+ struct commit **rev;
+ int rev_nr = 0;
int show_all = 0;
git_config(git_default_config, NULL);
usage(merge_base_usage);
argc--; argv++;
}
- if (argc != 3)
+ if (argc < 3)
usage(merge_base_usage);
- rev1 = get_commit_reference(argv[1]);
- rev2 = get_commit_reference(argv[2]);
- return show_merge_base(rev1, rev2, show_all);
+ rev = xmalloc((argc - 1) * sizeof(*rev));
+
+ do {
+ rev[rev_nr++] = get_commit_reference(argv[1]);
+ argc--; argv++;
+ } while (argc > 1);
+
+ return show_merge_base(rev, rev_nr, show_all);
}
const char *dst_name2 = ren2_dst;
if (string_list_has_string(¤t_directory_set, ren1_dst)) {
dst_name1 = del[delp++] = unique_path(ren1_dst, branch1);
- output(1, "%s is a directory in %s added as %s instead",
+ output(1, "%s is a directory in %s adding as %s instead",
ren1_dst, branch2, dst_name1);
remove_file(0, ren1_dst, 0);
}
if (string_list_has_string(¤t_directory_set, ren2_dst)) {
dst_name2 = del[delp++] = unique_path(ren2_dst, branch2);
- output(1, "%s is a directory in %s added as %s instead",
+ output(1, "%s is a directory in %s adding as %s instead",
ren2_dst, branch1, dst_name2);
remove_file(0, ren2_dst, 0);
}
const char *branch1)
{
char *new_path = unique_path(ren1->pair->two->path, branch1);
- output(1, "Renamed %s to %s instead", ren1->pair->one->path, new_path);
+ output(1, "Renaming %s to %s instead", ren1->pair->one->path, new_path);
remove_file(0, ren1->pair->two->path, 0);
update_file(0, ren1->pair->two->sha1, ren1->pair->two->mode, new_path);
free(new_path);
{
char *new_path1 = unique_path(ren1->pair->two->path, branch1);
char *new_path2 = unique_path(ren2->pair->two->path, branch2);
- output(1, "Renamed %s to %s and %s to %s instead",
+ output(1, "Renaming %s to %s and %s to %s instead",
ren1->pair->one->path, new_path1,
ren2->pair->one->path, new_path2);
remove_file(0, ren1->pair->two->path, 0);
branch1,
branch2);
if (mfi.merge || !mfi.clean)
- output(1, "Renamed %s->%s", src, ren1_dst);
+ output(1, "Renaming %s->%s", src, ren1_dst);
if (mfi.merge)
- output(2, "Auto-merged %s", ren1_dst);
+ output(2, "Auto-merging %s", ren1_dst);
if (!mfi.clean) {
output(1, "CONFLICT (content): merge conflict in %s",
if (string_list_has_string(¤t_directory_set, ren1_dst)) {
clean_merge = 0;
- output(1, "CONFLICT (rename/directory): Renamed %s->%s in %s "
+ output(1, "CONFLICT (rename/directory): Rename %s->%s in %s "
" directory %s added in %s",
ren1_src, ren1_dst, branch1,
ren1_dst, branch2);
conflict_rename_dir(ren1, branch1);
} else if (sha_eq(src_other.sha1, null_sha1)) {
clean_merge = 0;
- output(1, "CONFLICT (rename/delete): Renamed %s->%s in %s "
+ output(1, "CONFLICT (rename/delete): Rename %s->%s in %s "
"and deleted in %s",
ren1_src, ren1_dst, branch1,
branch2);
const char *new_path;
clean_merge = 0;
try_merge = 1;
- output(1, "CONFLICT (rename/add): Renamed %s->%s in %s. "
+ output(1, "CONFLICT (rename/add): Rename %s->%s in %s. "
"%s added in %s",
ren1_src, ren1_dst, branch1,
ren1_dst, branch2);
new_path = unique_path(ren1_dst, branch2);
- output(1, "Added as %s instead", new_path);
+ output(1, "Adding as %s instead", new_path);
update_file(0, dst_other.sha1, dst_other.mode, new_path);
} else if ((item = string_list_lookup(ren1_dst, renames2Dst))) {
ren2 = item->util;
clean_merge = 0;
ren2->processed = 1;
- output(1, "CONFLICT (rename/rename): Renamed %s->%s in %s. "
- "Renamed %s->%s in %s",
+ output(1, "CONFLICT (rename/rename): Rename %s->%s in %s. "
+ "Rename %s->%s in %s",
ren1_src, ren1_dst, branch1,
ren2->pair->one->path, ren2->pair->two->path, branch2);
conflict_rename_rename_2(ren1, branch1, ren2, branch2);
output(3, "Skipped %s (merged same as existing)", ren1_dst);
else {
if (mfi.merge || !mfi.clean)
- output(1, "Renamed %s => %s", ren1_src, ren1_dst);
+ output(1, "Renaming %s => %s", ren1_src, ren1_dst);
if (mfi.merge)
- output(2, "Auto-merged %s", ren1_dst);
+ output(2, "Auto-merging %s", ren1_dst);
if (!mfi.clean) {
output(1, "CONFLICT (rename/modify): Merge conflict in %s",
ren1_dst);
/* Deleted in both or deleted in one and
* unchanged in the other */
if (a_sha)
- output(2, "Removed %s", path);
+ output(2, "Removing %s", path);
/* do not touch working file if it did not exist */
remove_file(1, path, !a_sha);
} else {
const char *new_path = unique_path(path, add_branch);
clean_merge = 0;
output(1, "CONFLICT (%s): There is a directory with name %s in %s. "
- "Added %s as %s",
+ "Adding %s as %s",
conf, path, other_branch, path, new_path);
remove_file(0, path, 0);
update_file(0, sha, mode, new_path);
} else {
- output(2, "Added %s", path);
+ output(2, "Adding %s", path);
update_file(1, sha, mode, path);
}
} else if (a_sha && b_sha) {
reason = "add/add";
o_sha = (unsigned char *)null_sha1;
}
- output(2, "Auto-merged %s", path);
+ output(2, "Auto-merging %s", path);
o.path = a.path = b.path = (char *)path;
hashcpy(o.sha1, o_sha);
o.mode = o_mode;
struct dir_struct dir;
struct lock_file *lock_file = xcalloc(1, sizeof(struct lock_file));
- if (read_cache_unmerged())
- die("you need to resolve your current index first");
refresh_cache(REFRESH_QUIET);
fd = hold_locked_index(lock_file, 1);
static int merge_trivial(void)
{
unsigned char result_tree[20], result_commit[20];
- struct commit_list parent;
+ struct commit_list *parent = xmalloc(sizeof(struct commit_list *));
write_tree_trivial(result_tree);
printf("Wonderful.\n");
- parent.item = remoteheads->item;
- parent.next = NULL;
- commit_tree(merge_msg.buf, result_tree, &parent, result_commit);
+ parent->item = lookup_commit(head);
+ parent->next = xmalloc(sizeof(struct commit_list *));
+ parent->next->item = remoteheads->item;
+ parent->next->next = NULL;
+ commit_tree(merge_msg.buf, result_tree, parent, result_commit);
finish(result_commit, "In-index merge");
drop_save();
return 0;
int cnt = 0;
struct rev_info rev;
+ discard_cache();
if (read_cache() < 0)
die("failed to read the cache");
struct commit_list **remotes = &remoteheads;
setup_work_tree();
- if (unmerged_cache())
+ if (read_cache_unmerged())
die("You are in the middle of a conflicted merge.");
/*
if (argc != 1)
die("Can merge only exactly one commit into "
"empty head");
+ if (squash)
+ die("Squash commit into empty head not supported yet");
+ if (!allow_fast_forward)
+ die("Non-fast-forward commit does not make sense into "
+ "an empty head");
remote_head = peel_to_type(argv[0], 0, NULL, OBJ_COMMIT);
if (!remote_head)
die("%s - not something we can merge", argv[0]);
}
/* Automerge succeeded. */
+ discard_cache();
write_tree_trivial(result_tree);
automerge_was_ok = 1;
break;
} else {
int fd = sha1close(f, NULL, 0);
fixup_pack_header_footer(fd, sha1, pack_tmp_name, nr_written);
- fsync_or_die(fd, pack_tmp_name);
close(fd);
}
if (remote->mirror)
flags |= (TRANSPORT_PUSH_MIRROR|TRANSPORT_PUSH_FORCE);
- if ((flags & (TRANSPORT_PUSH_ALL|TRANSPORT_PUSH_MIRROR)) && refspec)
- return -1;
+ if ((flags & TRANSPORT_PUSH_ALL) && refspec) {
+ if (!strcmp(*refspec, "refs/tags/*"))
+ return error("--all and --tags are incompatible");
+ return error("--all can't be combined with refspecs");
+ }
+
+ if ((flags & TRANSPORT_PUSH_MIRROR) && refspec) {
+ if (!strcmp(*refspec, "refs/tags/*"))
+ return error("--mirror and --tags are incompatible");
+ return error("--mirror can't be combined with refspecs");
+ }
if ((flags & (TRANSPORT_PUSH_ALL|TRANSPORT_PUSH_MIRROR)) ==
(TRANSPORT_PUSH_ALL|TRANSPORT_PUSH_MIRROR)) {
free(collected.e);
}
- while (i < argc) {
- const char *ref = argv[i++];
+ for (; i < argc; i++) {
+ char *ref;
unsigned char sha1[20];
- if (!resolve_ref(ref, sha1, 1, NULL)) {
- status |= error("%s points nowhere!", ref);
+ if (!dwim_log(argv[i], strlen(argv[i]), sha1, &ref)) {
+ status |= error("%s points nowhere!", argv[i]);
continue;
}
set_reflog_expiry_param(&cb, explicit_expiry, ref);
revs.diff)
usage(rev_list_usage);
- save_commit_buffer = revs.verbose_header || revs.grep_filter;
+ save_commit_buffer = revs.verbose_header ||
+ revs.grep_filter.pattern_list;
if (bisect_list)
revs.limited = 1;
#include "cache-tree.h"
#include "diff.h"
#include "revision.h"
+#include "rerere.h"
/*
* This implements the builtins revert and cherry-pick.
die ("Error wrapping up %s", defmsg);
fprintf(stderr, "Automatic %s failed.%s\n",
me, help_msg(commit->object.sha1));
+ rerere();
exit(1);
}
if (commit_lock_file(&msg_file) < 0)
int len;
struct stat st;
+ len = strlen(path);
+ if (has_symlink_leading_path(len, path))
+ return error("'%s' is beyond a symbolic link", path);
+
/*
* First things first: get the stat information, to decide
* what to do about the pathname!
if (lstat(path, &st) < 0)
return process_lstat_error(path, errno);
- len = strlen(path);
if (S_ISDIR(st.st_mode))
return process_directory(path, len, &st);
#include "builtin.h"
#include "cache.h"
#include "pack.h"
-
+#include "pack-revindex.h"
#define MAX_CHAIN 50
else {
if (verify_one_pack(argv[1], verbose))
err = 1;
+ discard_revindex();
nothing_done = 0;
}
argc--; argv++;
#define CE_NAMEMASK (0x0fff)
#define CE_STAGEMASK (0x3000)
+#define CE_EXTENDED (0x4000)
#define CE_VALID (0x8000)
#define CE_STAGESHIFT 12
struct cache_tree *cache_tree;
time_t timestamp;
void *alloc;
- unsigned name_hash_initialized : 1;
+ unsigned name_hash_initialized : 1,
+ initialized : 1;
struct hash_table name_hash;
};
#define ADD_CACHE_VERBOSE 1
#define ADD_CACHE_PRETEND 2
#define ADD_CACHE_IGNORE_ERRORS 4
+#define ADD_CACHE_IGNORE_REMOVAL 8
extern int add_to_index(struct index_state *, const char *path, struct stat *, int flags);
extern int add_file_to_index(struct index_state *, const char *path, int flags);
extern struct cache_entry *make_cache_entry(unsigned int mode, const unsigned char *sha1, const char *path, int stage, int refresh);
extern enum safe_crlf safe_crlf;
enum branch_track {
+ BRANCH_TRACK_UNSPECIFIED = -1,
BRANCH_TRACK_NEVER = 0,
BRANCH_TRACK_REMOTE,
BRANCH_TRACK_ALWAYS,
die("early EOF '%s'", elem->path);
result[len] = 0;
+
+ /* If not a fake symlink, apply filters, e.g. autocrlf */
+ if (is_file) {
+ struct strbuf buf;
+
+ strbuf_init(&buf, 0);
+ if (convert_to_git(elem->path, result, len, &buf, safe_crlf)) {
+ free(result);
+ result = strbuf_detach(&buf, &len);
+ result_size = len;
+ }
+ }
}
else {
deleted_file:
struct commit_graft *lookup_commit_graft(const unsigned char *sha1);
extern struct commit_list *get_merge_bases(struct commit *rev1, struct commit *rev2, int cleanup);
+extern struct commit_list *get_merge_bases_many(struct commit *one, int n, struct commit **twos, int cleanup);
extern struct commit_list *get_octopus_merge_bases(struct commit_list *in);
extern int register_shallow(const unsigned char *sha1);
if (maxsize > 0) {
ret = vsnprintf(str, maxsize-SNPRINTF_SIZE_CORR, format, ap);
+ if (ret == maxsize-1)
+ ret = -1;
/* Windows does not NUL-terminate if result fills buffer */
str[maxsize-1] = 0;
}
break;
s = str;
ret = vsnprintf(str, maxsize-SNPRINTF_SIZE_CORR, format, ap);
+ if (ret == maxsize-1)
+ ret = -1;
}
free(s);
return ret;
CC = @CC@
CFLAGS = @CFLAGS@
+LDFLAGS = @LDFLAGS@
AR = @AR@
TAR = @TAR@
#INSTALL = @INSTALL@ # needs install-sh or install.sh in sources
__gitcomp "--cached --stat --numstat --shortstat --summary
--patch-with-stat --name-only --name-status --color
--no-color --color-words --no-renames --check
- --full-index --binary --abbrev --diff-filter
+ --full-index --binary --abbrev --diff-filter=
--find-copies-harder --pickaxe-all --pickaxe-regex
--text --ignore-space-at-eol --ignore-space-change
--ignore-all-space --exit-code --quiet --ext-diff
def p4_write_pipe(c, str):
real_cmd = p4_build_cmd(c)
- return write_pipe(c, str)
+ return write_pipe(real_cmd, str)
def read_pipe(c, ignore_error=False):
if verbose:
newdiff = newdiff.replace("\n", "\r\n")
tmpFile.write(submitTemplate + separatorLine + diff + newdiff)
tmpFile.close()
+ mtime = os.stat(fileName).st_mtime
defaultEditor = "vi"
if platform.system() == "Windows":
defaultEditor = "notepad"
else:
editor = os.environ.get("EDITOR", defaultEditor);
system(editor + " " + fileName)
- tmpFile = open(fileName, "rb")
- message = tmpFile.read()
- tmpFile.close()
- os.remove(fileName)
- submitTemplate = message[:message.index(separatorLine)]
- if self.isWindows:
- submitTemplate = submitTemplate.replace("\r\n", "\n")
- p4_write_pipe("submit -i", submitTemplate)
+ response = "y"
+ if os.stat(fileName).st_mtime <= mtime:
+ response = "x"
+ while response != "y" and response != "n":
+ response = raw_input("Submit template unchanged. Submit anyway? [y]es, [n]o (skip this patch) ")
+
+ if response == "y":
+ tmpFile = open(fileName, "rb")
+ message = tmpFile.read()
+ tmpFile.close()
+ submitTemplate = message[:message.index(separatorLine)]
+ if self.isWindows:
+ submitTemplate = submitTemplate.replace("\r\n", "\n")
+ p4_write_pipe("submit -i", submitTemplate)
+ else:
+ for f in editedFiles:
+ p4_system("revert \"%s\"" % f);
+ for f in filesToAdd:
+ p4_system("revert \"%s\"" % f);
+ system("rm %s" %f)
+
+ os.remove(fileName)
else:
fileName = "submit.txt"
file = open(fileName, "w+")
Usage
=====
-git-p4 supports two main modes: Importing from Perforce to a Git repository is
-done using "git-p4 sync" or "git-p4 rebase". Submitting changes from Git back
-to Perforce is done using "git-p4 submit".
+git-p4 can be used in two different ways:
+
+1) To import changes from Perforce to a Git repository, using "git-p4 sync".
+
+2) To submit changes from Git back to Perforce, using "git-p4 submit".
Importing
=========
-You can simply start with
+Simply start with
git-p4 clone //depot/path/project
git-p4 clone //depot/path/project myproject
-This will create an empty git repository in a subdirectory called "project" (or
-"myproject" with the second command), import the head revision from the
-specified perforce path into a git "p4" branch (remotes/p4 actually), create a
-master branch off it and check it out. If you want the entire history (not just
-the head revision) then you can simply append a "@all" to the depot path:
+This will:
+
+1) Create an empty git repository in a subdirectory called "project" (or
+"myproject" with the second command)
+
+2) Import the head revision from the given Perforce path into a git branch
+called "p4" (remotes/p4 actually)
+
+3) Create a master branch based on it and check it out.
+
+If you want the entire history (not just the head revision) then you can simply
+append a "@all" to the depot path:
git-p4 clone //depot/project/main@all myproject
This will import the current head revision of the specified depot path into a
"remotes/p4/master" branch of your git repository. You can use the
---branch=mybranch option to use a different branch.
+--branch=mybranch option to import into a different branch.
-If you want to import the entire history of a given depot path just use
+If you want to import the entire history of a given depot path simply use:
git-p4 sync //path/in/depot@all
+
+Note:
+
To achieve optimal compression you may want to run 'git repack -a -d -f' after
a big import. This may take a while.
-Support for Perforce integrations is still work in progress. Don't bother
-trying it unless you want to hack on it :)
-
Incremental Imports
===================
-After an initial import you can easily synchronize your git repository with
-newer changes from the Perforce depot by just calling
+After an initial import you can continue to synchronize your git repository
+with newer changes from the Perforce depot by just calling
git-p4 sync
in your git repository. By default the "remotes/p4/master" branch is updated.
-It is recommended to run 'git repack -a -d -f' from time to time when using
-incremental imports to optimally combine the individual git packs that each
-incremental import creates through the use of git-fast-import.
+Advanced Setup
+==============
+
+Suppose you have a periodically updated git repository somewhere, containing a
+complete import of a Perforce project. This repository can be cloned and used
+with git-p4. When updating the cloned repository with the "sync" command,
+git-p4 will try to fetch changes from the original repository first. The git
+protocol used with this is usually faster than importing from Perforce
+directly.
+
+This behaviour can be disabled by setting the "git-p4.syncFromOrigin" git
+configuration variable to "false".
Updating
========
==========
git-p4 has support for submitting changes from a git repository back to the
-Perforce depot. This requires a Perforce checkout separate to your git
+Perforce depot. This requires a Perforce checkout separate from your git
repository. To submit all changes that are in the current git branch but not in
the "p4" branch (or "origin" if "p4" doesn't exist) simply call
git-p4 submit --continue
-After submitting you should sync your perforce import branch ("p4" or "origin")
-from Perforce using git-p4's sync command.
-
-If you have changes in your working directory that you haven't committed into
-git yet but that you want to commit to Perforce directly ("quick fixes") then
-you do not have to go through the intermediate step of creating a git commit
-first but you can just call
-
- git-p4 submit --direct
-
-
Example
=======
*/
#include "cache.h"
+/* Just so that no insane platform contaminate namespace with these symbols */
+#undef SS
+#undef AA
+#undef DD
+
#define SS GIT_SPACE
#define AA GIT_ALPHA
#define DD GIT_DIGIT
const char *name;
const char *pattern;
} builtin_funcname_pattern[] = {
+ { "bibtex", "\\(@[a-zA-Z]\\{1,\\}[ \t]*{\\{0,1\\}[ \t]*[^ \t\"@',\\#}{~%]*\\).*$" },
+ { "html", "^\\s*\\(<[Hh][1-6]\\s.*>.*\\)$" },
{ "java", "!^[ ]*\\(catch\\|do\\|for\\|if\\|instanceof\\|"
"new\\|return\\|switch\\|throw\\|while\\)\n"
"^[ ]*\\(\\([ ]*"
"\\|"
"^\\(.*=[ \t]*\\(class\\|record\\).*\\)$"
},
- { "bibtex", "\\(@[a-zA-Z]\\{1,\\}[ \t]*{\\{0,1\\}[ \t]*[^ \t\"@',\\#}{~%]*\\).*$" },
- { "tex", "^\\(\\\\\\(\\(sub\\)*section\\|chapter\\|part\\)\\*\\{0,1\\}{.*\\)$" },
+ { "python", "^\\s*\\(\\(class\\|def\\)\\s.*\\)$" },
{ "ruby", "^\\s*\\(\\(class\\|module\\|def\\)\\s.*\\)$" },
+ { "tex", "^\\(\\\\\\(\\(sub\\)*section\\|chapter\\|part\\)\\*\\{0,1\\}{.*\\)$" },
};
static const char *diff_funcname_pattern(struct diff_filespec *one)
int read_directory(struct dir_struct *dir, const char *path, const char *base, int baselen, const char **pathspec)
{
- struct path_simplify *simplify = create_simplify(pathspec);
+ struct path_simplify *simplify;
+ if (has_symlink_leading_path(strlen(path), path))
+ return dir->nr;
+
+ simplify = create_simplify(pathspec);
read_directory_recursive(dir, path, base, baselen, 0, simplify);
free_simplify(simplify);
qsort(dir->entries, dir->nr, sizeof(struct dir_entry *), cmp_name);
echo "$ref -> $new_ref ($sha1 -> $new_sha1)"
if [ "$type" = "tag" ]; then
- new_sha1=$(git cat-file tag "$ref" |
+ new_sha1=$( ( printf 'object %s\ntype commit\ntag %s\n' \
+ "$new_sha1" "$new_ref"
+ git cat-file tag "$ref" |
sed -n \
-e "1,/^$/{
- s/^object .*/object $new_sha1/
- s/^type .*/type commit/
- s/^tag .*/tag $new_ref/
+ /^object /d
+ /^type /d
+ /^tag /d
}" \
-e '/^-----BEGIN PGP SIGNATURE-----/q' \
- -e 'p' |
+ -e 'p' ) |
git mktag) ||
die "Could not create new tag object for $ref"
if git cat-file tag "$ref" | \
exit 2
esac
- common=$(git merge-base --all $MRC $SHA1) ||
+ common=$(git merge-base --all $SHA1 $MRC) ||
die "Unable to find common commit with $SHA1"
case "$LF$common$LF" in
next=$(git write-tree 2>/dev/null)
fi
- # We have merged the other branch successfully. Ideally
- # we could implement OR'ed heads in merge-base, and keep
- # a list of commits we have merged so far in MRC to feed
- # them to merge-base, but we approximate it by keep using
- # the current MRC. We used to update it to $common, which
- # was incorrectly doing AND'ed merge-base here, which was
- # unneeded.
-
+ MRC="$MRC $SHA1"
MRT=$next
done
USAGE="[--quiet] [--cached] \
[add <repo> [-b branch] <path>]|[status|init|update [-i|--init]|summary [-n|--summary-limit <n>] [<commit>]] \
-[--] [<path>...]"
+[--] [<path>...]|[foreach <command>]|[sync [--] [<path>...]]"
OPTIONS_SPEC=
. git-sh-setup
+. git-parse-remote
require_work_tree
command=
# Resolve relative url by appending to parent's url
resolve_relative_url ()
{
- branch="$(git symbolic-ref HEAD 2>/dev/null)"
- remote="$(git config branch.${branch#refs/heads/}.remote)"
- remote="${remote:-origin}"
+ remote=$(get_default_remote)
remoteurl=$(git config "remote.$remote.url") ||
die "remote ($remote) does not have a url defined in .git/config"
url="$1"
echo "$remoteurl/${url%/}"
}
+#
+# Get submodule info for registered submodules
+# $@ = path to limit submodule list
+#
+module_list()
+{
+ git ls-files --stage -- "$@" | grep '^160000 '
+}
+
#
# Map submodule path to submodule name
#
die "Failed to register submodule '$path'"
}
+#
+# Execute an arbitrary command sequence in each checked out
+# submodule
+#
+# $@ = command to execute
+#
+cmd_foreach()
+{
+ module_list |
+ while read mode sha1 stage path
+ do
+ if test -e "$path"/.git
+ then
+ say "Entering '$path'"
+ (cd "$path" && eval "$@") ||
+ die "Stopping at '$path'; script returned non-zero status."
+ fi
+ done
+}
+
#
# Register submodules in .git/config
#
shift
done
- git ls-files --stage -- "$@" | grep '^160000 ' |
+ module_list "$@" |
while read mode sha1 stage path
do
# Skip already registered paths
esac
done
- git ls-files --stage -- "$@" | grep '^160000 ' |
+ module_list "$@" |
while read mode sha1 stage path
do
name=$(module_name "$path") || exit
shift
done
- git ls-files --stage -- "$@" | grep '^160000 ' |
+ module_list "$@" |
while read mode sha1 stage path
do
name=$(module_name "$path") || exit
fi
done
}
+#
+# Sync remote urls for submodules
+# This makes the value for remote.$remote.url match the value
+# specified in .gitmodules.
+#
+cmd_sync()
+{
+ while test $# -ne 0
+ do
+ case "$1" in
+ -q|--quiet)
+ quiet=1
+ shift
+ ;;
+ --)
+ shift
+ break
+ ;;
+ -*)
+ usage
+ ;;
+ *)
+ break
+ ;;
+ esac
+ done
+ cd_to_toplevel
+ module_list "$@" |
+ while read mode sha1 stage path
+ do
+ name=$(module_name "$path")
+ url=$(git config -f .gitmodules --get submodule."$name".url)
+ if test -e "$path"/.git
+ then
+ (
+ unset GIT_DIR
+ cd "$path"
+ remote=$(get_default_remote)
+ say "Synchronizing submodule url for '$name'"
+ git config remote."$remote".url "$url"
+ )
+ fi
+ done
+}
# This loop parses the command line arguments to find the
# subcommand name to dispatch. Parsing of the subcommand specific
while test $# != 0 && test -z "$command"
do
case "$1" in
- add | init | update | status | summary)
+ add | foreach | init | update | status | summary | sync)
command=$1
;;
-q|--quiet)
$head ||= 'HEAD';
my @refs;
my ($url, $rev, $uuid, $gs) = working_head_info($head, \@refs);
- $url = $_commit_url if defined $_commit_url;
+ $url = defined $_commit_url ? $_commit_url : $gs->full_url;
my $last_rev = $_revision if defined $_revision;
if ($url) {
print "Committing to $url ...\n";
"If these changes depend on each other, re-running ",
"without --no-rebase may be required."
}
+ my $expect_url = $url;
+ Git::SVN::remove_username($expect_url);
while (1) {
my $d = shift @$linear_refs or last;
unless (defined $last_rev) {
$gs->refname,
"\nBefore dcommitting";
}
- if ($url_ ne $url) {
+ if ($url_ ne $expect_url) {
fatal "URL mismatch after rebase: ",
- "$url_ != $url";
+ "$url_ != $expect_url";
}
if ($uuid_ ne $uuid) {
fatal "uuid mismatch after rebase: ",
{
load_command_list();
return is_in_cmdlist(&main_cmds, s) ||
- is_in_cmdlist(&other_cmds, s);
+ is_in_cmdlist(&other_cmds, s) ||
+ !strcmp(s, "help");
}
static const char *prepend(const char *prefix, const char *cmd)
char *index_name_buf = NULL, *keep_name_buf = NULL;
struct pack_idx_entry **idx_objects;
unsigned char sha1[20];
+ int nongit = 0;
+ setup_git_directory_gently(&nongit);
git_config(git_index_pack_config, NULL);
for (i = 1; i < argc; i++) {
struct commit_list *parents;
unsigned const char *sha1 = commit->object.sha1;
- if (!opt->diff)
+ if (!opt->diff && !DIFF_OPT_TST(&opt->diffopt, EXIT_WITH_STATUS))
return 0;
/* Root commit? */
} while (lo < hi);
die("internal error: pack revindex corrupt");
}
+
+void discard_revindex(void)
+{
+ if (pack_revindex_hashsz) {
+ int i;
+ for (i = 0; i < pack_revindex_hashsz; i++)
+ if (pack_revindex[i].revindex)
+ free(pack_revindex[i].revindex);
+ free(pack_revindex);
+ pack_revindex_hashsz = 0;
+ }
+}
};
struct revindex_entry *find_pack_revindex(struct packed_git *p, off_t ofs);
+void discard_revindex(void);
#endif
SHA1_Final(pack_file_sha1, &c);
write_or_die(pack_fd, pack_file_sha1, 20);
+ fsync_or_die(pack_fd, pack_name);
}
char *index_pack_lockfile(int ip_out)
#include "cache-tree.h"
#include "refs.h"
#include "dir.h"
+#include "tree.h"
+#include "commit.h"
+#include "diff.h"
+#include "diffcore.h"
+#include "revision.h"
/* Index extensions.
*
ce->ce_size = ntohl(ondisk->size);
/* On-disk flags are just 16 bits */
ce->ce_flags = ntohs(ondisk->flags);
+
+ /* For future extension: we do not understand this entry yet */
+ if (ce->ce_flags & CE_EXTENDED)
+ die("Unknown index entry format");
hashcpy(ce->sha1, ondisk->sha1);
len = ce->ce_flags & CE_NAMEMASK;
size_t mmap_size;
errno = EBUSY;
- if (istate->alloc)
+ if (istate->initialized)
return istate->cache_nr;
errno = ENOENT;
* index size
*/
istate->alloc = xmalloc(estimate_cache_size(mmap_size, istate->cache_nr));
+ istate->initialized = 1;
src_offset = sizeof(*hdr);
dst_offset = 0;
cache_tree_free(&(istate->cache_tree));
free(istate->alloc);
istate->alloc = NULL;
+ istate->initialized = 0;
/* no need to throw away allocated active_cache */
return 0;
istate->cache_nr = dst - istate->cache;
return !!last;
}
+
+struct update_callback_data
+{
+ int flags;
+ int add_errors;
+};
+
+static void update_callback(struct diff_queue_struct *q,
+ struct diff_options *opt, void *cbdata)
+{
+ int i;
+ struct update_callback_data *data = cbdata;
+
+ for (i = 0; i < q->nr; i++) {
+ struct diff_filepair *p = q->queue[i];
+ const char *path = p->one->path;
+ switch (p->status) {
+ default:
+ die("unexpected diff status %c", p->status);
+ case DIFF_STATUS_UNMERGED:
+ case DIFF_STATUS_MODIFIED:
+ case DIFF_STATUS_TYPE_CHANGED:
+ if (add_file_to_index(&the_index, path, data->flags)) {
+ if (!(data->flags & ADD_CACHE_IGNORE_ERRORS))
+ die("updating files failed");
+ data->add_errors++;
+ }
+ break;
+ case DIFF_STATUS_DELETED:
+ if (data->flags & ADD_CACHE_IGNORE_REMOVAL)
+ break;
+ if (!(data->flags & ADD_CACHE_PRETEND))
+ remove_file_from_index(&the_index, path);
+ if (data->flags & (ADD_CACHE_PRETEND|ADD_CACHE_VERBOSE))
+ printf("remove '%s'\n", path);
+ break;
+ }
+ }
+}
+
+int add_files_to_cache(const char *prefix, const char **pathspec, int flags)
+{
+ struct update_callback_data data;
+ struct rev_info rev;
+ init_revisions(&rev, prefix);
+ setup_revisions(0, NULL, &rev, NULL);
+ rev.prune_data = pathspec;
+ rev.diffopt.output_format = DIFF_FORMAT_CALLBACK;
+ rev.diffopt.format_callback = update_callback;
+ data.flags = flags;
+ data.add_errors = 0;
+ rev.diffopt.format_callback_data = &data;
+ run_diff_files(&rev, DIFF_RACY_IS_MODIFIED);
+ return !!data.add_errors;
+}
+
return result;
}
+/*
+ * This function frees a refspec array.
+ * Warning: code paths should be checked to ensure that the src
+ * and dst pointers are always freeable pointers as well
+ * as the refspec pointer itself.
+ */
+void free_refspecs(struct refspec *refspec, int nr_refspec)
+{
+ int i;
+
+ if (!refspec)
+ return;
+
+ for (i = 0; i < nr_refspec; i++) {
+ free(refspec[i].src);
+ free(refspec[i].dst);
+ }
+ free(refspec);
+}
+
static struct refspec *parse_refspec_internal(int nr_refspec, const char **refspec, int fetch, int verify)
{
int i;
invalid:
if (verify) {
- free(rs);
+ /*
+ * nr_refspec must be greater than zero and i must be valid
+ * since it is only possible to reach this point from within
+ * the for loop above.
+ */
+ free_refspecs(rs, i+1);
return NULL;
}
die("Invalid refspec '%s'", refspec[i]);
struct refspec *refspec;
refspec = parse_refspec_internal(1, fetch_refspec, 1, 1);
- free(refspec);
+ free_refspecs(refspec, 1);
return !!refspec;
}
int valid_fetch_refspec(const char *refspec);
struct refspec *parse_fetch_refspec(int nr_refspec, const char **refspec);
struct refspec *parse_push_refspec(int nr_refspec, const char **refspec);
+void free_refspecs(struct refspec *refspec, int nr_refspec);
int match_refs(struct ref *src, struct ref *dst, struct ref ***dst_tail,
int nr_refspec, const char **refspec, int all);
revs->commit_format = CMIT_FMT_DEFAULT;
+ revs->grep_filter.status_only = 1;
+ revs->grep_filter.pattern_tail = &(revs->grep_filter.pattern_list);
+ revs->grep_filter.regflags = REG_NEWLINE;
+
diff_setup(&revs->diffopt);
if (prefix && !revs->diffopt.prefix) {
revs->diffopt.prefix = prefix;
static void add_grep(struct rev_info *revs, const char *ptn, enum grep_pat_token what)
{
- if (!revs->grep_filter) {
- struct grep_opt *opt = xcalloc(1, sizeof(*opt));
- opt->status_only = 1;
- opt->pattern_tail = &(opt->pattern_list);
- opt->regflags = REG_NEWLINE;
- revs->grep_filter = opt;
- }
- append_grep_pattern(revs->grep_filter, ptn,
- "command line", 0, what);
+ append_grep_pattern(&revs->grep_filter, ptn, "command line", 0, what);
}
static void add_header_grep(struct rev_info *revs, const char *field, const char *pattern)
} else if (!prefixcmp(arg, "--grep=")) {
add_message_grep(revs, arg+7);
} else if (!strcmp(arg, "--extended-regexp") || !strcmp(arg, "-E")) {
- if (revs->grep_filter)
- revs->grep_filter->regflags |= REG_EXTENDED;
+ revs->grep_filter.regflags |= REG_EXTENDED;
} else if (!strcmp(arg, "--regexp-ignore-case") || !strcmp(arg, "-i")) {
- if (revs->grep_filter)
- revs->grep_filter->regflags |= REG_ICASE;
+ revs->grep_filter.regflags |= REG_ICASE;
} else if (!strcmp(arg, "--fixed-strings") || !strcmp(arg, "-F")) {
- if (revs->grep_filter)
- revs->grep_filter->fixed = 1;
+ revs->grep_filter.fixed = 1;
} else if (!strcmp(arg, "--all-match")) {
- if (revs->grep_filter)
- revs->grep_filter->all_match = 1;
+ revs->grep_filter.all_match = 1;
} else if (!prefixcmp(arg, "--encoding=")) {
arg += 11;
if (strcmp(arg, "none"))
if (diff_setup_done(&revs->diffopt) < 0)
die("diff_setup_done failed");
- if (revs->grep_filter) {
- compile_grep_patterns(revs->grep_filter);
- }
+ compile_grep_patterns(&revs->grep_filter);
if (revs->reverse && revs->reflog_info)
die("cannot combine --reverse with --walk-reflogs");
static int commit_match(struct commit *commit, struct rev_info *opt)
{
- if (!opt->grep_filter)
+ if (!opt->grep_filter.pattern_list)
return 1;
- return grep_buffer(opt->grep_filter,
+ return grep_buffer(&opt->grep_filter,
NULL, /* we say nothing, not even filename */
commit->buffer, strlen(commit->buffer));
}
#define REVISION_H
#include "parse-options.h"
+#include "grep.h"
#define SEEN (1u<<0)
#define UNINTERESTING (1u<<1)
int show_log_size;
/* Filter by commit log message */
- struct grep_opt *grep_filter;
+ struct grep_opt grep_filter;
/* Display history graph */
struct git_graph *graph;
void read_revisions_from_stdin(struct rev_info *revs);
typedef void (*show_early_output_fn_t)(struct rev_info *, struct commit_list *);
-volatile show_early_output_fn_t show_early_output;
+extern volatile show_early_output_fn_t show_early_output;
extern void init_revisions(struct rev_info *revs, const char *prefix);
extern int setup_revisions(int argc, const char **argv, struct rev_info *revs, const char *def);
void reprepare_packed_git(void)
{
+ discard_revindex();
prepare_packed_git_run_once = 0;
prepare_packed_git();
}
else
nth = -1;
}
- if (0 <= nth)
+ if (100000000 <= nth) {
+ at_time = nth;
+ nth = -1;
+ } else if (0 <= nth)
at_time = 0;
else {
char *tmp = xstrndup(str + at + 2, reflog_len);
#include "exec_cmd.h"
#include "strbuf.h"
-/* Stubs for functions that make no sense for git-shell. These stubs
- * are provided here to avoid linking in external redundant modules.
- */
-void release_pack_memory(size_t need, int fd){}
-void trace_argv_printf(const char **argv, const char *fmt, ...){}
-void trace_printf(const char *fmt, ...){}
-
-
static int do_generic_cmd(const char *me, char *arg)
{
const char *my_argv[4];
-/trash directory
+/trash directory*
/test-results
T = $(wildcard t[0-9][0-9][0-9][0-9]-*.sh)
TSVN = $(wildcard t91[0-9][0-9]-*.sh)
-all: pre-clean $(T) aggregate-results clean
+all: pre-clean
+ $(MAKE) aggregate-results-and-cleanup
$(T):
@echo "*** $@ ***"; GIT_CONFIG=.git/config '$(SHELL_PATH_SQ)' $@ $(GIT_TEST_OPTS)
clean:
$(RM) -r 'trash directory' test-results
+aggregate-results-and-cleanup: $(T)
+ $(MAKE) aggregate-results
+ $(MAKE) clean
+
aggregate-results:
'$(SHELL_PATH_SQ)' ./aggregate-results.sh test-results/t*-*
$(MAKE) $(TSVN) GIT_SVN_NO_OPTIMIZE_COMMITS=0 LC_ALL=en_US.UTF-8
.PHONY: pre-clean $(T) aggregate-results clean
-.NOTPARALLEL:
LIB_HTTPD_PATH=${LIB_HTTPD_PATH-'/usr/sbin/apache2'}
LIB_HTTPD_PORT=${LIB_HTTPD_PORT-'8111'}
-TEST_PATH="$PWD"/../lib-httpd
+TEST_PATH="$TEST_DIRECTORY"/lib-httpd
HTTPD_ROOT_PATH="$PWD"/httpd
HTTPD_DOCUMENT_ROOT_PATH=$HTTPD_ROOT_PATH/www
test_expect_success setup '
- cat ../t0022-crlf-rename.sh >sample &&
+ cat "$TEST_DIRECTORY"/t0022-crlf-rename.sh >sample &&
git add sample &&
test_tick &&
git commit -m Initial &&
- sed -e "s/\$/\r/" ../t0022-crlf-rename.sh >elpmas &&
+ sed -e "s/\$/\r/" "$TEST_DIRECTORY"/t0022-crlf-rename.sh >elpmas &&
git add elpmas &&
rm -f sample &&
--- /dev/null
+#!/bin/sh
+
+test_description='update-index and add refuse to add beyond symlinks'
+
+. ./test-lib.sh
+
+test_expect_success setup '
+ >a &&
+ mkdir b &&
+ ln -s b c &&
+ >c/d &&
+ git update-index --add a b/d
+'
+
+test_expect_success 'update-index --add beyond symlinks' '
+ test_must_fail git update-index --add c/d &&
+ ! ( git ls-files | grep c/d )
+'
+
+test_expect_success 'add beyond symlinks' '
+ test_must_fail git add c/d &&
+ ! ( git ls-files | grep c/d )
+'
+
+test_done
'
. ./test-lib.sh
-. ../lib-read-tree-m-3way.sh
+. "$TEST_DIRECTORY"/lib-read-tree-m-3way.sh
################################################################
# Trivial "majority when 3 stages exist" merge plus #2ALT, #3ALT
'
+test_expect_success 'fail if the index has unresolved entries' '
+
+ rm -fr [abcd] &&
+ git checkout -f "$c1" &&
+
+ test_must_fail git merge "$c5" &&
+ test_must_fail git merge "$c5" 2> out &&
+ grep "You are in the middle of a conflicted merge" out
+
+'
+
test_expect_success 'merge-recursive remove conflict' '
rm -fr [abcd] &&
3. A quick brown fox jumps over the lazy cat, oops dog.
EOF
-cat >"$p1" "$p0"
+cat 2>/dev/null >"$p1" "$p0"
echo 'Foo Bar Baz' >"$p2"
test -f "$p1" && cmp "$p0" "$p1" || {
--- /dev/null
+#!/bin/sh
+
+test_description='cherry-pick should rerere for conflicts'
+
+. ./test-lib.sh
+
+test_expect_success setup '
+ echo foo >foo &&
+ git add foo && test_tick && git commit -q -m 1 &&
+ echo foo-master >foo &&
+ git add foo && test_tick && git commit -q -m 2 &&
+
+ git checkout -b dev HEAD^ &&
+ echo foo-dev >foo &&
+ git add foo && test_tick && git commit -q -m 3 &&
+ git config rerere.enabled true
+'
+
+test_expect_success 'conflicting merge' '
+ test_must_fail git merge master
+'
+
+test_expect_success 'fixup' '
+ echo foo-dev >foo &&
+ git add foo && test_tick && git commit -q -m 4 &&
+ git reset --hard HEAD^
+ echo foo-dev >expect
+'
+
+test_expect_success 'cherry-pick conflict' '
+ test_must_fail git cherry-pick master &&
+ test_cmp expect foo
+'
+
+test_expect_success 'reconfigure' '
+ git config rerere.enabled false
+ git reset --hard
+'
+
+test_expect_success 'cherry-pick conflict without rerere' '
+ test_must_fail git cherry-pick master &&
+ test_must_fail test_cmp expect foo
+'
+
+test_done
: >F &&
git add F &&
T=$(git write-tree) &&
- C=$(git commit-tree $T <../t3900/1-UTF-8.txt) &&
+ C=$(git commit-tree $T <"$TEST_DIRECTORY"/t3900/1-UTF-8.txt) &&
git update-ref HEAD $C &&
git-tag C0
'
git config i18n.commitencoding $H &&
git-checkout -b $H C0 &&
echo $H >F &&
- git-commit -a -F ../t3900/$H.txt
+ git-commit -a -F "$TEST_DIRECTORY"/t3900/$H.txt
'
done
'
test_expect_success 'ISO-8859-1 should be shown in UTF-8 now' '
- compare_with ISO-8859-1 ../t3900/1-UTF-8.txt
+ compare_with ISO-8859-1 "$TEST_DIRECTORY"/t3900/1-UTF-8.txt
'
for H in EUCJP ISO-2022-JP
do
test_expect_success "$H should be shown in UTF-8 now" '
- compare_with '$H' ../t3900/2-UTF-8.txt
+ compare_with '$H' "$TEST_DIRECTORY"/t3900/2-UTF-8.txt
'
done
do
test_expect_success "$H should be shown in itself now" '
git config i18n.commitencoding '$H' &&
- compare_with '$H' ../t3900/'$H'.txt
+ compare_with '$H' "$TEST_DIRECTORY"/t3900/'$H'.txt
'
done
'
test_expect_success 'ISO-8859-1 should be shown in UTF-8 now' '
- compare_with ISO-8859-1 ../t3900/1-UTF-8.txt
+ compare_with ISO-8859-1 "$TEST_DIRECTORY"/t3900/1-UTF-8.txt
'
for H in EUCJP ISO-2022-JP
do
test_expect_success "$H should be shown in UTF-8 now" '
- compare_with '$H' ../t3900/2-UTF-8.txt
+ compare_with '$H' "$TEST_DIRECTORY"/t3900/2-UTF-8.txt
'
done
for H in EUCJP ISO-2022-JP
do
test_expect_success "$H should be shown in $J now" '
- compare_with '$H' ../t3900/'$J'.txt
+ compare_with '$H' "$TEST_DIRECTORY"/t3900/'$J'.txt
'
done
done
for H in ISO-8859-1 EUCJP ISO-2022-JP
do
test_expect_success "No conversion with $H" '
- compare_with "--encoding=none '$H'" ../t3900/'$H'.txt
+ compare_with "--encoding=none '$H'" "$TEST_DIRECTORY"/t3900/'$H'.txt
'
done
# use UTF-8 in author and committer name to match the
# i18n.commitencoding settings
- . ../t3901-utf8.txt &&
+ . "$TEST_DIRECTORY"/t3901-utf8.txt &&
test_tick &&
echo "$GIT_AUTHOR_NAME" >mine &&
# the second one on the side branch is ISO-8859-1
git config i18n.commitencoding ISO-8859-1 &&
# use author and committer name in ISO-8859-1 to match it.
- . ../t3901-8859-1.txt &&
+ . "$TEST_DIRECTORY"/t3901-8859-1.txt &&
test_tick &&
echo Yet another >theirs &&
git add theirs &&
# The result will be committed by GIT_COMMITTER_NAME --
# we want UTF-8 encoded name.
- . ../t3901-utf8.txt &&
+ . "$TEST_DIRECTORY"/t3901-utf8.txt &&
git checkout -b test &&
git-rebase master &&
test_expect_success 'rebase (U/L)' '
git config i18n.commitencoding UTF-8 &&
git config i18n.logoutputencoding ISO-8859-1 &&
- . ../t3901-utf8.txt &&
+ . "$TEST_DIRECTORY"/t3901-utf8.txt &&
git reset --hard side &&
git-rebase master &&
# In this test we want ISO-8859-1 encoded commits as the result
git config i18n.commitencoding ISO-8859-1 &&
git config i18n.logoutputencoding ISO-8859-1 &&
- . ../t3901-8859-1.txt &&
+ . "$TEST_DIRECTORY"/t3901-8859-1.txt &&
git reset --hard side &&
git-rebase master &&
# to get ISO-8859-1 results.
git config i18n.commitencoding ISO-8859-1 &&
git config i18n.logoutputencoding UTF-8 &&
- . ../t3901-8859-1.txt &&
+ . "$TEST_DIRECTORY"/t3901-8859-1.txt &&
git reset --hard side &&
git-rebase master &&
git config i18n.commitencoding UTF-8 &&
git config i18n.logoutputencoding UTF-8 &&
- . ../t3901-utf8.txt &&
+ . "$TEST_DIRECTORY"/t3901-utf8.txt &&
git reset --hard master &&
git cherry-pick side^ &&
git config i18n.commitencoding ISO-8859-1 &&
git config i18n.logoutputencoding ISO-8859-1 &&
- . ../t3901-8859-1.txt &&
+ . "$TEST_DIRECTORY"/t3901-8859-1.txt &&
git reset --hard master &&
git cherry-pick side^ &&
git config i18n.commitencoding UTF-8 &&
git config i18n.logoutputencoding ISO-8859-1 &&
- . ../t3901-utf8.txt &&
+ . "$TEST_DIRECTORY"/t3901-utf8.txt &&
git reset --hard master &&
git cherry-pick side^ &&
git config i18n.commitencoding ISO-8859-1 &&
git config i18n.logoutputencoding UTF-8 &&
- . ../t3901-8859-1.txt &&
+ . "$TEST_DIRECTORY"/t3901-8859-1.txt &&
git reset --hard master &&
git cherry-pick side^ &&
test_expect_success 'rebase --merge (U/U)' '
git config i18n.commitencoding UTF-8 &&
git config i18n.logoutputencoding UTF-8 &&
- . ../t3901-utf8.txt &&
+ . "$TEST_DIRECTORY"/t3901-utf8.txt &&
git reset --hard side &&
git-rebase --merge master &&
test_expect_success 'rebase --merge (U/L)' '
git config i18n.commitencoding UTF-8 &&
git config i18n.logoutputencoding ISO-8859-1 &&
- . ../t3901-utf8.txt &&
+ . "$TEST_DIRECTORY"/t3901-utf8.txt &&
git reset --hard side &&
git-rebase --merge master &&
# In this test we want ISO-8859-1 encoded commits as the result
git config i18n.commitencoding ISO-8859-1 &&
git config i18n.logoutputencoding ISO-8859-1 &&
- . ../t3901-8859-1.txt &&
+ . "$TEST_DIRECTORY"/t3901-8859-1.txt &&
git reset --hard side &&
git-rebase --merge master &&
# to get ISO-8859-1 results.
git config i18n.commitencoding ISO-8859-1 &&
git config i18n.logoutputencoding UTF-8 &&
- . ../t3901-8859-1.txt &&
+ . "$TEST_DIRECTORY"/t3901-8859-1.txt &&
git reset --hard side &&
git-rebase --merge master &&
. ./test-lib.sh
-P1='pathname with HT'
-: >"$P1" 2>&1 && test -f "$P1" && rm -f "$P1" || {
- echo >&2 'Filesystem does not support HT in names'
- test_done
-}
-
FN='濱野'
GN='純'
HT=' '
'
DQ='"'
-echo foo > "Name and an${HT}HT"
+echo foo 2>/dev/null > "Name and an${HT}HT"
test -f "Name and an${HT}HT" || {
# since FAT/NTFS does not allow tabs in filenames, skip this test
say 'Your filesystem does not allow tabs in filenames, test skipped.'
'
. ./test-lib.sh
-. ../diff-lib.sh
+. "$TEST_DIRECTORY"/diff-lib.sh
echo >path0 'Line 1
Line 2
'
. ./test-lib.sh
-. ../diff-lib.sh
+. "$TEST_DIRECTORY"/diff-lib.sh
echo >path0 'Line 1
Line 2
'
. ./test-lib.sh
-. ../lib-read-tree-m-3way.sh
+. "$TEST_DIRECTORY"/lib-read-tree-m-3way.sh
cat >.test-plain-OA <<\EOF
:000000 100644 0000000000000000000000000000000000000000 ccba72ad3888a3520b39efcf780b9ee64167535d A AA
'git diff-tree -r $tree_A $tree_B >.test-a &&
cmp -s .test-a .test-recursive-AB'
+test_expect_success \
+ 'diff-tree --stdin of known trees.' \
+ 'echo $tree_A $tree_B | git diff-tree --stdin > .test-a &&
+ echo $tree_A $tree_B > .test-plain-ABx &&
+ cat .test-plain-AB >> .test-plain-ABx &&
+ cmp -s .test-a .test-plain-ABx'
+
+test_expect_success \
+ 'diff-tree --stdin of known trees.' \
+ 'echo $tree_A $tree_B | git diff-tree -r --stdin > .test-a &&
+ echo $tree_A $tree_B > .test-recursive-ABx &&
+ cat .test-recursive-AB >> .test-recursive-ABx &&
+ cmp -s .test-a .test-recursive-ABx'
+
test_expect_success \
'diff-cache O with A in cache' \
'git read-tree $tree_A &&
'
. ./test-lib.sh
-. ../diff-lib.sh ;# test-lib chdir's into trash
+. "$TEST_DIRECTORY"/diff-lib.sh ;# test-lib chdir's into trash
test_expect_success \
'prepare reference tree' \
- 'cat ../../COPYING >COPYING &&
+ 'cat "$TEST_DIRECTORY"/../COPYING >COPYING &&
echo frotz >rezrov &&
git update-index --add COPYING rezrov &&
tree=$(git write-tree) &&
test_expect_success \
'prepare work tree once again' \
- 'cat ../../COPYING >COPYING &&
+ 'cat "$TEST_DIRECTORY"/../COPYING >COPYING &&
git update-index --add --remove COPYING COPYING.1'
# tree has COPYING and rezrov. work tree has COPYING and COPYING.1,
by an edit for them.
'
. ./test-lib.sh
-. ../diff-lib.sh
+. "$TEST_DIRECTORY"/diff-lib.sh
test_expect_success \
'prepare reference tree' \
'
. ./test-lib.sh
-. ../diff-lib.sh ;# test-lib chdir's into trash
+. "$TEST_DIRECTORY"/diff-lib.sh ;# test-lib chdir's into trash
test_expect_success \
'prepare reference tree' \
- 'cat ../../COPYING >COPYING &&
+ 'cat "$TEST_DIRECTORY"/../COPYING >COPYING &&
echo frotz >rezrov &&
git update-index --add COPYING rezrov &&
tree=$(git write-tree) &&
test_expect_success \
'prepare work tree once again' \
- 'cat ../../COPYING >COPYING &&
+ 'cat "$TEST_DIRECTORY"/../COPYING >COPYING &&
git update-index --add --remove COPYING COPYING.1'
git diff-index -C --find-copies-harder $tree >current
'
. ./test-lib.sh
-. ../diff-lib.sh ;# test-lib chdir's into trash
+. "$TEST_DIRECTORY"/diff-lib.sh ;# test-lib chdir's into trash
test_expect_success \
'prepare reference tree' \
'mkdir path0 path1 &&
- cp ../../COPYING path0/COPYING &&
+ cp "$TEST_DIRECTORY"/../COPYING path0/COPYING &&
git update-index --add path0/COPYING &&
tree=$(git write-tree) &&
echo $tree'
Further, with -B and -M together, these should turn into two renames.
'
. ./test-lib.sh
-. ../diff-lib.sh ;# test-lib chdir's into trash
+. "$TEST_DIRECTORY"/diff-lib.sh ;# test-lib chdir's into trash
test_expect_success \
setup \
- 'cat ../../README >file0 &&
- cat ../../COPYING >file1 &&
+ 'cat "$TEST_DIRECTORY"/../README >file0 &&
+ cat "$TEST_DIRECTORY"/../COPYING >file1 &&
git update-index --add file0 file1 &&
tree=$(git write-tree) &&
echo "$tree"'
'
. ./test-lib.sh
-. ../diff-lib.sh ;# test-lib chdir's into trash
+. "$TEST_DIRECTORY"/diff-lib.sh ;# test-lib chdir's into trash
test_expect_success \
'prepare reference tree' \
- 'cat ../../COPYING >COPYING &&
+ 'cat "$TEST_DIRECTORY"/../COPYING >COPYING &&
echo frotz >rezrov &&
git update-index --add COPYING rezrov &&
tree=$(git write-tree) &&
test_expect_success \
'prepare work tree once again' \
- 'cat ../../COPYING >COPYING &&
+ 'cat "$TEST_DIRECTORY"/../COPYING >COPYING &&
git update-index --add --remove COPYING COPYING.1'
git diff-index -z -C --find-copies-harder $tree >current
path1/file1
'
. ./test-lib.sh
-. ../diff-lib.sh ;# test-lib chdir's into trash
+. "$TEST_DIRECTORY"/diff-lib.sh ;# test-lib chdir's into trash
test_expect_success \
setup \
'
. ./test-lib.sh
-. ../diff-lib.sh
+. "$TEST_DIRECTORY"/diff-lib.sh
cat > expected << EOF
diff --git a/frotz b/frotz
'echo AIT >a && echo BIT >b && echo CIT >c && echo DIT >d &&
git update-index --add a b c d &&
echo git >a &&
- cat ../test4012.png >b &&
+ cat "$TEST_DIRECTORY"/test4012.png >b &&
echo git >c &&
cat b b >d'
test=`echo "$cmd" | sed -e 's|[/ ][/ ]*|_|g'`
cnt=`expr $test_count + 1`
pfx=`printf "%04d" $cnt`
- expect="../t4013/diff.$test"
+ expect="$TEST_DIRECTORY/t4013/diff.$test"
actual="$pfx-diff.$test"
test_expect_success "git $cmd" '
'
+cat > expect << EOF
+---
+ file | 16 ++++++++++++++++
+ 1 files changed, 16 insertions(+), 0 deletions(-)
+
+diff --git a/file b/file
+index 40f36c6..2dc5c23 100644
+--- a/file
++++ b/file
+@@ -13,4 +13,20 @@ C
+ 10
+ D
+ E
+ F
++5
+EOF
+
+test_expect_success 'format-patch respects -U' '
+
+ git format-patch -U4 -2 &&
+ sed -e "1,/^$/d" -e "/^+5/q" < 0001-This-is-an-excessively-long-subject-line-for-a-messa.patch > output &&
+ test_cmp expect output
+
+'
+
test_done
'
. ./test-lib.sh
-. ../diff-lib.sh
+. "$TEST_DIRECTORY"/diff-lib.sh
# Ray Lehtiniemi's example
git diff --check
'
+test_expect_success 'combined diff with autocrlf conversion' '
+
+ git reset --hard &&
+ echo >x hello &&
+ git commit -m "one side" x &&
+ git checkout HEAD^ &&
+ echo >x goodbye &&
+ git commit -m "the other side" x &&
+ git config core.autocrlf true &&
+ test_must_fail git merge master &&
+
+ git diff | sed -e "1,/^@@@/d" >actual &&
+ ! grep "^-" actual
+
+'
+
test_done
P2='pathname with SP'
P3='pathname
with LF'
-: >"$P1" 2>&1 && test -f "$P1" && rm -f "$P1" || {
- echo >&2 'Filesystem does not support tabs in names'
+: 2>/dev/null >"$P1" && test -f "$P1" && rm -f "$P1" || {
+ say 'Your filesystem does not allow tabs in filenames, test skipped.'
test_done
}
test_expect_success 'force diff with "diff"' '
echo >.gitattributes "file diff" &&
git diff >actual &&
- test_cmp ../t4020/diff.NUL actual
+ test_cmp "$TEST_DIRECTORY"/t4020/diff.NUL actual
'
test_done
test_expect_success setup '
- cat ../../COPYING >test &&
+ cat "$TEST_DIRECTORY"/../COPYING >test &&
git add test &&
tr \
"abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ" \
"nopqrstuvwxyzabcdefghijklmNOPQRSTUVWXYZABCDEFGHIJKLM" \
- <../../COPYING >test
+ <"$TEST_DIRECTORY"/../COPYING >test
'
test_expect_success setup '
rm -f foo bar &&
- cat ../../COPYING >foo &&
+ cat "$TEST_DIRECTORY"/../COPYING >foo &&
ln -s linklink bar &&
git add foo bar &&
git commit -a -m Initial &&
git tag one &&
rm -f foo bar &&
- cat ../../COPYING >bar &&
+ cat "$TEST_DIRECTORY"/../COPYING >bar &&
ln -s linklink foo &&
git add foo bar &&
git commit -a -m Second &&
git tag two &&
rm -f foo bar &&
- cat ../../COPYING >foo &&
+ cat "$TEST_DIRECTORY"/../COPYING >foo &&
git add foo &&
git commit -a -m Third &&
git tag three &&
# This is purely for sanity check
rm -f foo bar &&
- cat ../../COPYING >foo &&
- cat ../../Makefile >bar &&
+ cat "$TEST_DIRECTORY"/../COPYING >foo &&
+ cat "$TEST_DIRECTORY"/../Makefile >bar &&
git add foo bar &&
git commit -a -m Fifth &&
git tag five &&
rm -f foo bar &&
- cat ../../Makefile >foo &&
- cat ../../COPYING >bar &&
+ cat "$TEST_DIRECTORY"/../Makefile >foo &&
+ cat "$TEST_DIRECTORY"/../COPYING >bar &&
git add foo bar &&
git commit -a -m Sixth &&
git tag six
test_description='difference in submodules'
. ./test-lib.sh
-. ../diff-lib.sh
+. "$TEST_DIRECTORY"/diff-lib.sh
_z40=0000000000000000000000000000000000000000
test_expect_success setup '
test_expect_success "$title" '
git apply --stat --summary \
<"$TEST_DIRECTORY/t4100/t-apply-$num.patch" >current &&
- test_cmp ../t4100/t-apply-$num.expect current
+ test_cmp "$TEST_DIRECTORY"/t4100/t-apply-$num.expect current
'
test_expect_success "$title with recount" '
sed -e "$UNC" <"$TEST_DIRECTORY/t4100/t-apply-$num.patch" |
git apply --recount --stat --summary >current &&
- test_cmp ../t4100/t-apply-$num.expect current
+ test_cmp "$TEST_DIRECTORY"/t4100/t-apply-$num.expect current
'
done <<\EOF
rename
do
test $i -eq $j && continue
cat frotz.$i >frotz
- test_expect_success \
- "apply diff between $i and $j" \
- "git apply <../t4101/diff.$i-$j && diff frotz.$j frotz"
+ test_expect_success "apply diff between $i and $j" '
+ git apply <"$TEST_DIRECTORY"/t4101/diff.$i-$j &&
+ test_cmp frotz.$j frotz
+ '
done
done
'
+test_expect_success 'setup case sensitivity tests' '
+ echo case >one &&
+ test_tick &&
+ git commit -a -m Second
+'
+
+test_expect_success 'log --grep' '
+ echo second >expect &&
+ git log -1 --pretty="tformat:%s" --grep=sec >actual &&
+ test_cmp expect actual
+'
+test_expect_success 'log -i --grep' '
+ echo Second >expect &&
+ git log -1 --pretty="tformat:%s" -i --grep=sec >actual &&
+ test_cmp expect actual
+'
+
+test_expect_success 'log --grep -i' '
+ echo Second >expect &&
+ git log -1 --pretty="tformat:%s" --grep=sec -i >actual &&
+ test_cmp expect actual
+'
test_done
. ./test-lib.sh
test_expect_success 'split sample box' \
- 'git mailsplit -o. ../t5100/sample.mbox >last &&
+ 'git mailsplit -o. "$TEST_DIRECTORY"/t5100/sample.mbox >last &&
last=`cat last` &&
echo total is $last &&
test `cat last` = 11'
for mail in `echo 00*`
do
- test_expect_success "mailinfo $mail" \
- "git mailinfo -u msg$mail patch$mail <$mail >info$mail &&
+ test_expect_success "mailinfo $mail" '
+ git mailinfo -u msg$mail patch$mail <$mail >info$mail &&
echo msg &&
- diff ../t5100/msg$mail msg$mail &&
+ test_cmp "$TEST_DIRECTORY"/t5100/msg$mail msg$mail &&
echo patch &&
- diff ../t5100/patch$mail patch$mail &&
+ test_cmp "$TEST_DIRECTORY"/t5100/patch$mail patch$mail &&
echo info &&
- diff ../t5100/info$mail info$mail"
+ test_cmp "$TEST_DIRECTORY"/t5100/info$mail info$mail
+ '
done
test_expect_success 'respect NULs' '
- git mailsplit -d3 -o. ../t5100/nul-plain &&
- cmp ../t5100/nul-plain 001 &&
+ git mailsplit -d3 -o. "$TEST_DIRECTORY"/t5100/nul-plain &&
+ test_cmp "$TEST_DIRECTORY"/t5100/nul-plain 001 &&
(cat 001 | git mailinfo msg patch) &&
test 4 = $(wc -l < patch)
test_expect_success 'Preserve NULs out of MIME encoded message' '
- git mailsplit -d5 -o. ../t5100/nul-b64.in &&
- cmp ../t5100/nul-b64.in 00001 &&
+ git mailsplit -d5 -o. "$TEST_DIRECTORY"/t5100/nul-b64.in &&
+ test_cmp "$TEST_DIRECTORY"/t5100/nul-b64.in 00001 &&
git mailinfo msg patch <00001 &&
- cmp ../t5100/nul-b64.expect patch
+ test_cmp "$TEST_DIRECTORY"/t5100/nul-b64.expect patch
'
test-2-${packname_2}.idx \
test-3-${packname_3}.idx'
+test_expect_success \
+ 'verify pack -v' \
+ 'git verify-pack -v test-1-${packname_1}.idx \
+ test-2-${packname_2}.idx \
+ test-3-${packname_3}.idx'
+
test_expect_success \
'verify-pack catches mismatched .idx and .pack files' \
'cat test-1-${packname_1}.idx >test-3.idx &&
"test \"in-pack: 18\" = \"$(grep in-pack count.shallow)\""
count_output () {
- sed -e '/^in-pack:/d' -e '/^packs:/d' -e '/: 0$/d' "$1"
+ sed -e '/^in-pack:/d' -e '/^packs:/d' -e '/^size-pack:/d' -e '/: 0$/d' "$1"
}
test_expect_success "clone shallow object count (part 2)" '
test=`echo "$cmd" | sed -e 's|[/ ][/ ]*|_|g'`
cnt=`expr $test_count + 1`
pfx=`printf "%04d" $cnt`
- expect_f="../../t5515/fetch.$test"
+ expect_f="$TEST_DIRECTORY/t5515/fetch.$test"
actual_f="$pfx-fetch.$test"
- expect_r="../../t5515/refs.$test"
+ expect_r="$TEST_DIRECTORY/t5515/refs.$test"
actual_r="$pfx-refs.$test"
test_expect_success "$cmd" '
exit
fi
-. ../lib-httpd.sh
+. "$TEST_DIRECTORY"/lib-httpd.sh
if ! start_httpd >&3 2>&4
then
test_description='Tests git rev-list --bisect functionality'
. ./test-lib.sh
-. ../t6000lib.sh # t6xxx specific functions
+. "$TEST_DIRECTORY"/t6000lib.sh # t6xxx specific functions
# usage: test_bisection max-diff bisect-option head ^prune...
#
test_description='Tests git rev-list --topo-order functionality'
. ./test-lib.sh
-. ../t6000lib.sh # t6xxx specific functions
+. "$TEST_DIRECTORY"/t6000lib.sh # t6xxx specific functions
list_duplicates()
{
'MB=$(git merge-base --all PL PR) &&
expr "$(git name-rev "$MB")" : "[0-9a-f]* tags/C2"'
+# Another set to demonstrate base between one commit and a merge
+# in the documentation.
+
+test_expect_success 'merge-base for octopus-step (setup)' '
+ test_tick && git commit --allow-empty -m root && git tag MMR &&
+ test_tick && git commit --allow-empty -m 1 && git tag MM1 &&
+ test_tick && git commit --allow-empty -m o &&
+ test_tick && git commit --allow-empty -m o &&
+ test_tick && git commit --allow-empty -m o &&
+ test_tick && git commit --allow-empty -m A && git tag MMA &&
+ git checkout MM1 &&
+ test_tick && git commit --allow-empty -m o &&
+ test_tick && git commit --allow-empty -m o &&
+ test_tick && git commit --allow-empty -m o &&
+ test_tick && git commit --allow-empty -m B && git tag MMB &&
+ git checkout MMR &&
+ test_tick && git commit --allow-empty -m o &&
+ test_tick && git commit --allow-empty -m o &&
+ test_tick && git commit --allow-empty -m o &&
+ test_tick && git commit --allow-empty -m o &&
+ test_tick && git commit --allow-empty -m C && git tag MMC
+'
+
+test_expect_success 'merge-base A B C' '
+ MB=$(git merge-base --all MMA MMB MMC) &&
+ MM1=$(git rev-parse --verify MM1) &&
+ test "$MM1" = "$MB"
+'
+
+test_expect_success 'criss-cross merge-base for octopus-step (setup)' '
+ git reset --hard MMR &&
+ test_tick && git commit --allow-empty -m 1 && git tag CC1 &&
+ git reset --hard E &&
+ test_tick && git commit --allow-empty -m 2 && git tag CC2 &&
+ test_tick && git merge -s ours CC1 &&
+ test_tick && git commit --allow-empty -m o &&
+ test_tick && git commit --allow-empty -m B && git tag CCB &&
+ git reset --hard CC1 &&
+ test_tick && git merge -s ours CC2 &&
+ test_tick && git commit --allow-empty -m A && git tag CCA
+'
+
+test_expect_success 'merge-base B A^^ A^^2' '
+ MB0=$(git merge-base --all CCB CCA^^ CCA^^2 | sort) &&
+ MB1=$(git rev-parse CC1 CC2 | sort) &&
+ test "$MB0" = "$MB1"
+'
+
test_done
test_expect_success 'binary files cannot be merged' '
test_must_fail git merge-file -p \
- orig.txt ../test4012.png new1.txt 2> merge.err &&
+ orig.txt "$TEST_DIRECTORY"/test4012.png new1.txt 2> merge.err &&
grep "Cannot merge binary files" merge.err
'
test_expect_success setup '
- cat ../test4012.png >m &&
+ cat "$TEST_DIRECTORY"/test4012.png >m &&
git add m &&
git ls-files -s | sed -e "s/ 0 / 1 /" >E1 &&
test_tick &&
test_description='Test git rev-parse with different parent options'
. ./test-lib.sh
-. ../t6000lib.sh # t6xxx specific functions
+. "$TEST_DIRECTORY"/t6000lib.sh # t6xxx specific functions
date >path0
git update-index --add path0
'
cat >expected <<EOF
-Merge branch 'left' of ../$test
+Merge branch 'left' of $TEST_DIRECTORY/$test
EOF
test_expect_success 'merge-msg test #2' '
git checkout master &&
- git fetch ../"$test" left &&
+ git fetch "$TEST_DIRECTORY/$test" left &&
git fmt-merge-msg <.git/FETCH_HEAD >actual &&
test_cmp expected actual
test_expect_success \
'prepare reference tree' \
'mkdir path0 path1 &&
- cp ../../COPYING path0/COPYING &&
+ cp "$TEST_DIRECTORY"/../COPYING path0/COPYING &&
git add path0/COPYING &&
git-commit -m add -a'
test_expect_success \
'adding another file' \
- 'cp ../../README path0/README &&
+ 'cp "$TEST_DIRECTORY"/../README path0/README &&
git add path0/README &&
git-commit -m add2 -a'
test_cmp expect actual
'
+test_expect_success 'Tag name filtering allows slashes in tag names' '
+ git tag -m tag-with-slash X/1 &&
+ git cat-file tag X/1 | sed -e s,X/1,X/2, > expect &&
+ git filter-branch -f --tag-name-filter "echo X/2" &&
+ git cat-file tag X/2 > actual &&
+ test_cmp expect actual
+'
+
test_done
# Name and email: C O Mitter <committer@example.com>
# No password given, to enable non-interactive operation.
-cp -R ../t7004 ./gpghome
+cp -R "$TEST_DIRECTORY"/t7004 ./gpghome
chmod 0700 gpghome
GNUPGHOME="$(pwd)/gpghome"
export GNUPGHOME
test_expect_success \
'creating initial files' \
'mkdir path0 &&
- cp ../../COPYING path0/COPYING &&
+ cp "$TEST_DIRECTORY"/../COPYING path0/COPYING &&
git add path0/COPYING &&
git-commit -m add -a'
'creating second files' \
'mkdir path1 &&
mkdir path1/path2 &&
- cp ../../COPYING path1/path2/COPYING &&
- cp ../../COPYING path1/COPYING &&
- cp ../../COPYING COPYING &&
- cp ../../COPYING path0/COPYING-TOO &&
+ cp "$TEST_DIRECTORY"/../COPYING path1/path2/COPYING &&
+ cp "$TEST_DIRECTORY"/../COPYING path1/COPYING &&
+ cp "$TEST_DIRECTORY"/../COPYING COPYING &&
+ cp "$TEST_DIRECTORY"/../COPYING path0/COPYING-TOO &&
git add path1/path2/COPYING &&
git add path1/COPYING &&
git add COPYING &&
test_expect_success \
'checkout with --track fakes a sensible -b <name>' '
git update-ref refs/remotes/origin/koala/bear renamer &&
+ git update-ref refs/new/koala/bear renamer &&
+
git checkout --track origin/koala/bear &&
test "refs/heads/koala/bear" = "$(git symbolic-ref HEAD)" &&
- test "$(git rev-parse HEAD)" = "$(git rev-parse renamer)"'
+ test "$(git rev-parse HEAD)" = "$(git rev-parse renamer)" &&
+
+ git checkout master && git branch -D koala/bear &&
+
+ git checkout --track refs/remotes/origin/koala/bear &&
+ test "refs/heads/koala/bear" = "$(git symbolic-ref HEAD)" &&
+ test "$(git rev-parse HEAD)" = "$(git rev-parse renamer)" &&
+
+ git checkout master && git branch -D koala/bear &&
+
+ git checkout --track remotes/origin/koala/bear &&
+ test "refs/heads/koala/bear" = "$(git symbolic-ref HEAD)" &&
+ test "$(git rev-parse HEAD)" = "$(git rev-parse renamer)" &&
+
+ git checkout master && git branch -D koala/bear &&
+
+ git checkout --track refs/new/koala/bear &&
+ test "refs/heads/koala/bear" = "$(git symbolic-ref HEAD)" &&
+ test "$(git rev-parse HEAD)" = "$(git rev-parse renamer)"
+'
test_expect_success \
'checkout with --track, but without -b, fails with too short tracked name' '
'
test_expect_success 'a Signed-off-by line by itself should not commit' '
- ! GIT_EDITOR=../t7500/add-signed-off git commit --template "$TEMPLATE"
+ (
+ test_set_editor "$TEST_DIRECTORY"/t7500/add-signed-off &&
+ test_must_fail git commit --template "$TEMPLATE"
+ )
'
test_expect_success 'adding comments to a template should not commit' '
- ! GIT_EDITOR=../t7500/add-comments git commit --template "$TEMPLATE"
+ (
+ test_set_editor "$TEST_DIRECTORY"/t7500/add-comments &&
+ test_must_fail git commit --template "$TEMPLATE"
+ )
'
test_expect_success 'adding real content to a template should commit' '
- GIT_EDITOR=../t7500/add-content git commit --template "$TEMPLATE" &&
+ (
+ test_set_editor "$TEST_DIRECTORY"/t7500/add-content &&
+ git commit --template "$TEMPLATE"
+ ) &&
commit_msg_is "template linecommit message"
'
echo "short template" > "$TEMPLATE" &&
echo "new content" >> foo &&
git add foo &&
- GIT_EDITOR=../t7500/add-content git commit -t "$TEMPLATE" &&
+ (
+ test_set_editor "$TEST_DIRECTORY"/t7500/add-content &&
+ git commit -t "$TEMPLATE"
+ ) &&
commit_msg_is "short templatecommit message"
'
git config commit.template "$TEMPLATE" &&
echo "more content" >> foo &&
git add foo &&
- GIT_EDITOR=../t7500/add-content git commit &&
+ (
+ test_set_editor "$TEST_DIRECTORY"/t7500/add-content &&
+ git commit
+ ) &&
git config --unset commit.template &&
commit_msg_is "new templatecommit message"
'
test_expect_success 'explicit commit message should override template' '
echo "still more content" >> foo &&
git add foo &&
- GIT_EDITOR=../t7500/add-content git commit --template "$TEMPLATE" \
+ GIT_EDITOR="$TEST_DIRECTORY"/t7500/add-content git commit --template "$TEMPLATE" \
-m "command line msg" &&
commit_msg_is "command line msg"
'
echo "content galore" >> foo &&
git add foo &&
echo "standard input msg" |
- GIT_EDITOR=../t7500/add-content git commit \
- --template "$TEMPLATE" --file - &&
+ (
+ test_set_editor "$TEST_DIRECTORY"/t7500/add-content &&
+ git commit --template "$TEMPLATE" --file -
+ ) &&
commit_msg_is "standard input msg"
'
test_expect_success '--signoff' '
echo "yet another content *narf*" >> foo &&
- echo "zort" |
- GIT_EDITOR=../t7500/add-content git commit -s -F - foo &&
+ echo "zort" | (
+ test_set_editor "$TEST_DIRECTORY"/t7500/add-content &&
+ git commit -s -F - foo
+ ) &&
git cat-file commit HEAD | sed "1,/^$/d" > output &&
- diff expect output
+ test_cmp expect output
'
test_expect_success 'commit message from file (1)' '
test_debug 'gitk --all'
+test_expect_success 'in-index merge' '
+ git reset --hard c0 &&
+ git merge --no-ff -s resolve c1 > out &&
+ grep "Wonderful." out &&
+ verify_parents $c0 $c1
+'
+
+test_debug 'gitk --all'
+
test_done
git diff --exit-code &&
test -f c0.c &&
test -f c1.c &&
- test -f c2.c
+ test -f c2.c &&
+ test 3 = $(git ls-tree -r HEAD | wc -l) &&
+ test 3 = $(git ls-files | wc -l)
'
test_expect_success 'merge c2 to c3 (fails)' '
. ./test-lib.sh
PROG='git annotate'
-. ../annotate-tests.sh
+. "$TEST_DIRECTORY"/annotate-tests.sh
test_expect_success \
'Annotating an old revision works' \
. ./test-lib.sh
PROG='git blame -c'
-. ../annotate-tests.sh
+. "$TEST_DIRECTORY"/annotate-tests.sh
test_done
. ./lib-git-svn.sh
test_expect_success 'load svm repo' '
- svnadmin load -q "$rawsvnrepo" < ../t9110/svm.dump &&
+ svnadmin load -q "$rawsvnrepo" < "$TEST_DIRECTORY"/t9110/svm.dump &&
git-svn init --minimize-url -R arr -i bar "$svnrepo"/mirror/arr &&
git-svn init --minimize-url -R argh -i dir "$svnrepo"/mirror/argh &&
git-svn init --minimize-url -R argh -i e \
. ./lib-git-svn.sh
test_expect_success 'load svnsync repo' '
- svnadmin load -q "$rawsvnrepo" < ../t9111/svnsync.dump &&
+ svnadmin load -q "$rawsvnrepo" < "$TEST_DIRECTORY"/t9111/svnsync.dump &&
git-svn init --minimize-url -R arr -i bar "$svnrepo"/bar &&
git-svn init --minimize-url -R argh -i dir "$svnrepo"/dir &&
git-svn init --minimize-url -R argh -i e "$svnrepo"/dir/a/b/c/d/e &&
. ./lib-git-svn.sh
test_expect_success 'load repository with strange names' '
- svnadmin load -q "$rawsvnrepo" < ../t9115/funky-names.dump &&
+ svnadmin load -q "$rawsvnrepo" < "$TEST_DIRECTORY"/t9115/funky-names.dump &&
start_httpd gtk+
'
. ./lib-git-svn.sh
test_expect_success 'load repository with renamed directory' '
- svnadmin load -q "$rawsvnrepo" < ../t9121/renamed-dir.dump
+ svnadmin load -q "$rawsvnrepo" < "$TEST_DIRECTORY"/t9121/renamed-dir.dump
'
test_expect_success 'init and fetch repository' '
'mkdir A B C D E F &&
echo hello1 >A/newfile1.txt &&
echo hello2 >B/newfile2.txt &&
- cp ../test9200a.png C/newfile3.png &&
- cp ../test9200a.png D/newfile4.png &&
+ cp "$TEST_DIRECTORY"/test9200a.png C/newfile3.png &&
+ cp "$TEST_DIRECTORY"/test9200a.png D/newfile4.png &&
git add A/newfile1.txt &&
git add B/newfile2.txt &&
git add C/newfile3.png &&
rm -f B/newfile2.txt &&
rm -f C/newfile3.png &&
echo Hello5 >E/newfile5.txt &&
- cp ../test9200b.png D/newfile4.png &&
- cp ../test9200a.png F/newfile6.png &&
+ cp "$TEST_DIRECTORY"/test9200b.png D/newfile4.png &&
+ cp "$TEST_DIRECTORY"/test9200a.png F/newfile6.png &&
git add E/newfile5.txt &&
git add F/newfile6.png &&
git commit -a -m "Test: Remove, add and update" &&
'mkdir "G g" &&
echo ok then >"G g/with spaces.txt" &&
git add "G g/with spaces.txt" && \
- cp ../test9200a.png "G g/with spaces.png" && \
+ cp "$TEST_DIRECTORY"/test9200a.png "G g/with spaces.png" && \
git add "G g/with spaces.png" &&
git commit -a -m "With spaces" &&
id=$(git rev-list --max-count=1 HEAD) &&
test_expect_success \
'Update file with spaces in file name' \
'echo Ok then >>"G g/with spaces.txt" &&
- cat ../test9200a.png >>"G g/with spaces.png" && \
+ cat "$TEST_DIRECTORY"/test9200a.png >>"G g/with spaces.png" && \
git add "G g/with spaces.png" &&
git commit -a -m "Update with spaces" &&
id=$(git rev-list --max-count=1 HEAD) &&
'mkdir -p Å/goo/a/b/c/d/e/f/g/h/i/j/k/l/m/n/o/p/q/r/s/t/u/v/w/x/y/z/å/ä/ö &&
echo Foo >Å/goo/a/b/c/d/e/f/g/h/i/j/k/l/m/n/o/p/q/r/s/t/u/v/w/x/y/z/å/ä/ö/gårdetsågårdet.txt &&
git add Å/goo/a/b/c/d/e/f/g/h/i/j/k/l/m/n/o/p/q/r/s/t/u/v/w/x/y/z/å/ä/ö/gårdetsågårdet.txt &&
- cp ../test9200a.png Å/goo/a/b/c/d/e/f/g/h/i/j/k/l/m/n/o/p/q/r/s/t/u/v/w/x/y/z/å/ä/ö/gårdetsågårdet.png &&
+ cp "$TEST_DIRECTORY"/test9200a.png Å/goo/a/b/c/d/e/f/g/h/i/j/k/l/m/n/o/p/q/r/s/t/u/v/w/x/y/z/å/ä/ö/gårdetsågårdet.png &&
git add Å/goo/a/b/c/d/e/f/g/h/i/j/k/l/m/n/o/p/q/r/s/t/u/v/w/x/y/z/å/ä/ö/gårdetsågårdet.png &&
git commit -a -m "Går det så går det" && \
id=$(git rev-list --max-count=1 HEAD) &&
test_description='test git-fast-import utility'
. ./test-lib.sh
-. ../diff-lib.sh ;# test-lib chdir's into trash
+. "$TEST_DIRECTORY"/diff-lib.sh ;# test-lib chdir's into trash
file2_data='file2
second line of EOF'
git config i18n.commitencoding ISO-8859-1 &&
# use author and committer name in ISO-8859-1 to match it.
- . ../t3901-8859-1.txt &&
+ . "$TEST_DIRECTORY"/t3901-8859-1.txt &&
test_tick &&
echo rosten >file &&
git commit -s -m den file &&
our \$site_header = "";
our \$site_footer = "";
our \$home_text = "indextext.html";
-our @stylesheets = ("file:///$safe_pwd/../../gitweb/gitweb.css");
-our \$logo = "file:///$safe_pwd/../../gitweb/git-logo.png";
-our \$favicon = "file:///$safe_pwd/../../gitweb/git-favicon.png";
+our @stylesheets = ("file:///$TEST_DIRECTORY/../gitweb/gitweb.css");
+our \$logo = "file:///$TEST_DIRECTORY/../gitweb/git-logo.png";
+our \$favicon = "file:///$TEST_DIRECTORY/../gitweb/git-favicon.png";
our \$projects_list = "";
our \$export_ok = "";
our \$strict_export = "";
# written to web server logs, so we are not interested in that:
# we are interested only in properly formatted errors/warnings
rm -f gitweb.log &&
- perl -- "$(pwd)/../../gitweb/gitweb.perl" \
+ perl -- "$TEST_DIRECTORY/../gitweb/gitweb.perl" \
>/dev/null 2>gitweb.log &&
if grep -q -s "^[[]" gitweb.log >/dev/null; then false; else true; fi
test_expect_success \
'encode(commit): utf8' \
- '. ../t3901-utf8.txt &&
+ '. "$TEST_DIRECTORY"/t3901-utf8.txt &&
echo "UTF-8" >> file &&
git add file &&
- git commit -F ../t3900/1-UTF-8.txt &&
+ git commit -F "$TEST_DIRECTORY"/t3900/1-UTF-8.txt &&
gitweb_run "p=.git;a=commit"'
test_debug 'cat gitweb.log'
test_expect_success \
'encode(commit): iso-8859-1' \
- '. ../t3901-8859-1.txt &&
+ '. "$TEST_DIRECTORY"/t3901-8859-1.txt &&
echo "ISO-8859-1" >> file &&
git add file &&
git config i18n.commitencoding ISO-8859-1 &&
- git commit -F ../t3900/ISO-8859-1.txt &&
+ git commit -F "$TEST_DIRECTORY"/t3900/ISO-8859-1.txt &&
git config --unset i18n.commitencoding &&
gitweb_run "p=.git;a=commit"'
test_debug 'cat gitweb.log'
test_external_without_stderr \
'Perl API' \
- perl ../t9700/test.pl
+ perl "$TEST_DIRECTORY"/t9700/test.pl
test_done
BEGIN { use_ok('Git') }
# set up
-our $repo_dir = "trash directory";
our $abs_repo_dir = Cwd->cwd;
-die "this must be run by calling the t/t97* shell script(s)\n"
- if basename(Cwd->cwd) ne $repo_dir;
ok(our $r = Git->repository(Directory => "."), "open repository");
# config
error "bug in the test script: not 1 parameter to test-create-repo"
owd=`pwd`
repo="$1"
- mkdir "$repo"
+ mkdir -p "$repo"
cd "$repo" || error "Cannot setup test environment"
"$GIT_EXEC_PATH/git" init "--template=$GIT_EXEC_PATH/templates/blt/" >&3 2>&4 ||
error "cannot run git init -- have you built things yet?"
# we will leave things as they are.
say_color pass "passed all $msg"
+
+ test -d "$remove_trash" &&
+ cd "$(dirname "$remove_trash")" &&
+ rm -rf "$(basename "$remove_trash")"
+
exit 0 ;;
*)
. ../GIT-BUILD-OPTIONS
# Test repository
-test="trash directory"
+test="trash directory.$(basename "$0" .sh)"
+test ! -z "$debug" || remove_trash="$TEST_DIRECTORY/$test"
rm -fr "$test" || {
trap - exit
echo >&5 "FATAL: Cannot prepare test area"
bpsrc = $(filter-out %~,$(wildcard *--*))
boilerplates.made : $(bpsrc)
- $(QUIET)ls *--* 2>/dev/null | \
+ $(QUIET)umask 022 && ls *--* 2>/dev/null | \
while read boilerplate; \
do \
case "$$boilerplate" in *~) continue ;; esac && \
dst=`echo "$$boilerplate" | sed -e 's|^this|.|;s|--|/|g'` && \
dir=`expr "$$dst" : '\(.*\)/'` && \
- $(INSTALL) -d -m 755 blt/$$dir && \
+ mkdir -p blt/$$dir && \
case "$$boilerplate" in \
*--) ;; \
*) cp -p $$boilerplate blt/$$dst ;; \
state.refresh_cache = 1;
memset(&o->result, 0, sizeof(o->result));
+ o->result.initialized = 1;
if (o->src_index)
o->result.timestamp = o->src_index->timestamp;
o->merge_size = len;