--- /dev/null
+Git v1.7.0.7 Release Notes
+==========================
+
+Fixes since v1.7.0.6
+--------------------
+
+ * "make NO_CURL=NoThanks install" was broken.
+
+ * An overlong line after ".gitdir: " in a git file caused out of bounds
+ access to an array on the stack.
+
+ * "git config --path conf.var" to attempt to expand a variable conf.var
+ that uses "~/" short-hand segfaulted when $HOME environment variable
+ was not set.
+
+And other minor fixes and documentation updates.
* "git rev-parse --parseopt --stop-at-non-option" did not stop at non option
when --keep-dashdash was in effect.
+
+ * An overlong line after ".gitdir: " in a git file caused out of bounds
+ access to an array on the stack.
+
+ * "git config --path conf.var" to attempt to expand a variable conf.var
+ that uses "~/" short-hand segfaulted when $HOME environment variable
+ was not set.
+
+And other minor fixes and documentation updates.
--- /dev/null
+Git v1.7.2.1 Release Notes
+==========================
+
+Fixes since v1.7.2
+------------------
+
+ * "git instaweb" wasn't useful when your Apache was installed under a
+ name other than apache2 (e.g. "httpd").
+
+ * Similarly, "git web--browse" (invoked by "git help -w") learned that
+ chrome browser is sometimes called google-chrome.
+
+ * An overlong line after ".gitdir: " in a git file caused out of bounds
+ access to an array on the stack.
+
+ * "git config --path conf.var" to attempt to expand a variable conf.var
+ that uses "~/" short-hand segfaulted when $HOME environment variable
+ was not set.
+
+ * Documentation on Cygwin failed to build.
+
+ * The error message from "git pull blarg" when 'blarg' is an unknown
+ remote name has been improved.
+
+And other minor fixes and documentation updates.
-Git v1.7.2 Release Notes (draft)
-================================
+Git v1.7.2 Release Notes
+========================
Updates since v1.7.1
--------------------
* The test harness has been updated to produce TAP-friendly output.
+ * Many documentation improvement patches are also included.
+
Fixes since v1.7.1
------------------
* "git read-tree -m A B" used to switch to branch B while retaining
local changes added an incorrect cache-tree information (b1f47514).
-
---
-exec >/var/tmp/1
-O=v1.7.2-rc2-17-gc9a9766
-echo O=$(git describe HEAD)
-git shortlog --no-merges HEAD ^maint ^$O
before committing
- do not check in commented out code or unneeded files
- the first line of the commit message should be a short
- description and should skip the full stop
+ description (50 characters is the soft limit, see DISCUSSION
+ in git-commit(1)), and should skip the full stop
- the body should provide a meaningful commit message, which:
- uses the imperative, present tense: "change",
not "changed" or "changes".
- includes motivation for the change, and contrasts
its implementation with previous behaviour
- - if you want your work included in git.git, add a
- "Signed-off-by: Your Name <you@example.com>" line to the
- commit message (or just use the option "-s" when
- committing) to confirm that you agree to the Developer's
- Certificate of Origin
+ - add a "Signed-off-by: Your Name <you@example.com>" line to the
+ commit message (or just use the option "-s" when committing)
+ to confirm that you agree to the Developer's Certificate of Origin
- make sure that you have tests for the bug you are fixing
- make sure that the test suite passes after your commit
If set to true, git-receive-pack will deny a ref update that deletes
the ref. Use this to prevent such a ref deletion via a push.
+receive.denyDeleteCurrent::
+ If set to true, git-receive-pack will deny a ref update that
+ deletes the currently checked out branch of a non-bare repository.
+
receive.denyCurrentBranch::
If set to true or "refuse", git-receive-pack will deny a ref update
to the currently checked out branch of a non-bare repository.
the diff-patch output format. Non default number of
digits can be specified with `--abbrev=<n>`.
--B::
- Break complete rewrite changes into pairs of delete and create.
-
--M::
+-B[<n>][/<m>]::
+ Break complete rewrite changes into pairs of delete and
+ create. This serves two purposes:
++
+It affects the way a change that amounts to a total rewrite of a file
+not as a series of deletion and insertion mixed together with a very
+few lines that happen to match textually as the context, but as a
+single deletion of everything old followed by a single insertion of
+everything new, and the number `m` controls this aspect of the -B
+option (defaults to 60%). `-B/70%` specifies that less than 30% of the
+original should remain in the result for git to consider it a total
+rewrite (i.e. otherwise the resulting patch will be a series of
+deletion and insertion mixed together with context lines).
++
+When used with -M, a totally-rewritten file is also considered as the
+source of a rename (usually -M only considers a file that disappeared
+as the source of a rename), and the number `n` controls this aspect of
+the -B option (defaults to 50%). `-B20%` specifies that a change with
+addition and deletion compared to 20% or more of the file's size are
+eligible for being picked up as a possible source of a rename to
+another file.
+
+-M[<n>]::
ifndef::git-log[]
Detect renames.
endif::git-log[]
For following files across renames while traversing history, see
`--follow`.
endif::git-log[]
+ If `n` is specified, it is a is a threshold on the similarity
+ index (i.e. amount of addition/deletions compared to the
+ file's size). For example, `-M90%` means git should consider a
+ delete/add pair to be a rename if more than 90% of the file
+ hasn't changed.
--C::
+-C[<n>]::
Detect copies as well as renames. See also `--find-copies-harder`.
+ If `n` is specified, it has the same meaning as for `-M<n>`.
ifndef::git-format-patch[]
--diff-filter=[ACDMRTUXB*]::
[verse]
'git add' [-n] [-v] [--force | -f] [--interactive | -i] [--patch | -p]
[--edit | -e] [--all | [--update | -u]] [--intent-to-add | -N]
- [--refresh] [--ignore-errors] [--] [<filepattern>...]
+ [--refresh] [--ignore-errors] [--ignore-missing] [--]
+ [<filepattern>...]
DESCRIPTION
-----------
-n::
--dry-run::
- Don't actually add the file(s), just show if they exist.
+ Don't actually add the file(s), just show if they exist and/or will
+ be ignored.
-v::
--verbose::
them, do not abort the operation, but continue adding the
others. The command shall still exit with non-zero status.
+--ignore-missing::
+ This option can only be used together with --dry-run. By using
+ this option the user can check if any of the given files would
+ be ignored, no matter if they are already present in the work
+ tree or not.
+
\--::
This option can be used to separate command-line options from
the list of files, (useful when filenames might be mistaken
Without these options, the command applies the patch only to files,
and does not require them to be in a git repository.
+This command applies the patch but does not create a commit. Use
+linkgit:git-am[1] to create commits from patches generated by
+linkgit:git-format-patch[1] and/or received by email.
+
OPTIONS
-------
<patch>...::
are ignored and only the absence or presence of the corresponding
subdirectory is checked and (if possible) updated.
+
+SEE ALSO
+--------
+linkgit:git-am[1].
+
+
Author
------
Written by Linus Torvalds <torvalds@osdl.org>
linkgit:git-web--browse[1] for more information about this. If
the script fails, the URL will be printed to stdout.
+start::
--start::
Start the httpd instance and exit. This does not generate
any of the configuration files for spawning a new instance.
+stop::
--stop::
Stop the httpd instance and exit. This does not generate
any of the configuration files for spawning a new instance,
nor does it close the browser.
+restart::
--restart::
Restart the httpd instance and exit. This does not generate
any of the configuration files for spawning a new instance.
paths. With this, the full diff is shown for commits that touch
the specified paths; this means that "<path>..." limits only
commits, and doesn't limit diff for those commits.
++
+Note that this affects all diff-based output types, e.g. those
+produced by --stat etc.
--log-size::
Before the log message print out its size in bytes. Intended
with `-s` or `-u` options does not make any sense.
-t::
- Identify the file status with the following tags (followed by
- a space) at the start of each line:
+ This feature is semi-deprecated. For scripting purpose,
+ linkgit:git-status[1] `--porcelain` and
+ linkgit:git-diff-files[1] `--name-status` are almost always
+ superior alternatives, and users should look at
+ linkgit:git-status[1] `--short` or linkgit:git-diff[1]
+ `--name-status` for more user-friendly alternatives.
++
+This option identifies the file status with the following tags (followed by
+a space) at the start of each line:
+
H:: cached
S:: skip-worktree
M:: unmerged
lines, show only a partial prefix.
Non default number of digits can be specified with --abbrev=<n>.
+--debug::
+ After each line that describes a file, add more data about its
+ cache entry. This is intended to show as much information as
+ possible for manual inspection; the exact format may change at
+ any time.
+
\--::
Do not interpret any more arguments as options.
This is the default behaviour; the option is provided to
override any configuration settings.
+TEMPORARY FILES
+---------------
+`git mergetool` creates `*.orig` backup files while resolving merges.
+These are safe to remove once a file has been merged and its
+`git mergetool` session has completed.
+
+Setting the `mergetool.keepBackup` configuration variable to `false`
+causes `git mergetool` to automatically remove the backup as files
+are successfully merged.
+
Author
------
Written by Theodore Y Ts'o <tytso@mit.edu>
is taken to be in `refs/notes/` if it is not qualified.
-n::
+--dry-run::
Do not remove anything; just report the object names whose notes
would be removed.
-v::
+--verbose::
Report all object names whose notes are removed.
-------
-n::
+--dry-run::
Do not remove anything; just report what it would
remove.
-v::
+--verbose::
Report all removed objects.
\--::
For a successfully pushed ref, the summary shows the old and new
values of the ref in a form suitable for using as an argument to
`git log` (this is `<old>..<new>` in most cases, and
- `<old>...<new>` for forced non-fast-forward updates). For a
- failed update, more details are given for the failure.
- The string `rejected` indicates that git did not try to send the
- ref at all (typically because it is not a fast-forward). The
- string `remote rejected` indicates that the remote end refused
- the update; this rejection is typically caused by a hook on the
- remote side. The string `remote failure` indicates that the
- remote end did not report the successful update of the ref
- (perhaps because of a temporary error on the remote side, a
- break in the network connection, or other transient error).
+ `<old>...<new>` for forced non-fast-forward updates).
++
+For a failed update, more details are given:
++
+--
+rejected::
+ Git did not try to send the ref at all, typically because it
+ is not a fast-forward and you did not force the update.
+
+remote rejected::
+ The remote end refused the update. Usually caused by a hook
+ on the remote side, or because the remote repository has one
+ of the following safety options in effect:
+ `receive.denyCurrentBranch` (for pushes to the checked out
+ branch), `receive.denyNonFastForwards` (for forced
+ non-fast-forward updates), `receive.denyDeletes` or
+ `receive.denyDeleteCurrent`. See linkgit:git-config[1].
+
+remote failure::
+ The remote end did not report the successful update of the ref,
+ perhaps because of a temporary error on the remote side, a
+ break in the network connection, or other transient error.
+--
from::
The name of the local ref being pushed, minus its
support.
+BUGS
+----
+In order to match a directory with $GIT_DIR/info/sparse-checkout,
+trailing slash must be used. The form without trailing slash, while
+works with .gitignore, does not work with sparse checkout.
+
+
SEE ALSO
--------
linkgit:git-write-tree[1]; linkgit:git-ls-files[1];
SYNOPSIS
--------
-'git request-pull' <start> <url> [<end>]
+'git request-pull' [-p] <start> <url> [<end>]
DESCRIPTION
-----------
OPTIONS
-------
+-p::
+ Show patch text
+
<start>::
Commit to start at.
(e.g. splits single switches aggregate values), a bit like `getopt(1)` does.
It takes on the standard input the specification of the options to parse and
-understand, and echoes on the standard output a line suitable for `sh(1)` `eval`
+understand, and echoes on the standard output a string suitable for `sh(1)` `eval`
to replace the arguments with normalized ones. In case of error, it outputs
usage on the standard error stream, and exits with code 129.
+Note: Make sure you quote the result when passing it to `eval`. See
+below for an example.
+
Input Format
~~~~~~~~~~~~
An option group Header
C? option C with an optional argument"
-eval `echo "$OPTS_SPEC" | git rev-parse --parseopt -- "$@" || echo exit $?`
+eval "$(echo "$OPTS_SPEC" | git rev-parse --parseopt -- "$@" || echo exit $?)"
------------
SQ-QUOTE
to get a listing of all tags together with what they dereference.
+FILES
+-----
+`.git/refs/*`, `.git/packed-refs`
+
SEE ALSO
--------
-linkgit:git-ls-remote[1]
+linkgit:git-ls-remote[1],
+linkgit:git-update-ref[1],
+linkgit:gitrepository-layout[5]
AUTHORS
-------
SYNOPSIS
--------
[verse]
-'git submodule' [--quiet] add [-b branch]
+'git submodule' [--quiet] add [-b branch] [-f|--force]
[--reference <repository>] [--] <repository> [<path>]
'git submodule' [--quiet] status [--cached] [--recursive] [--] [<path>...]
'git submodule' [--quiet] init [--] [<path>...]
together in the same relative location, and only the
superproject's URL needs to be provided: git-submodule will correctly
locate the submodule using the relative URL in .gitmodules.
-+
-The submodule will be added with "git add --force <path>". I.e. git
-doesn't care if the new path is in a `gitignore`. Your invocation of
-"git submodule add" is considered enough to override it.
status::
Show the status of the submodules. This will print the SHA-1 of the
--branch::
Branch of repository to add as submodule.
+-f::
+--force::
+ This option is only valid for the add command.
+ Allow adding an otherwise ignored submodule path.
+
--cached::
This option is only valid for status and summary commands. These
commands typically use the commit found in the submodule HEAD, but
revision fetched. If unset, 'git svn' assumes this option to
be "true".
+svn.pathnameencoding::
+ This instructs git svn to recode pathnames to a given encoding.
+ It can be used by windows users and by those who work in non-utf8
+ locales to avoid corrupted file names with non-ASCII characters.
+ Valid encodings are the ones supported by Perl's Encode module.
+
Since the noMetadata, rewriteRoot, rewriteUUID, useSvnsyncProps and useSvmProps
options all affect the metadata generated and used by 'git svn'; they
*must* be set in the configuration file before any history is imported
branch of the `git.git` repository.
Documentation for older releases are available here:
-* link:v1.7.1.1/git.html[documentation for release 1.7.1.1]
+* link:v1.7.2.1/git.html[documentation for release 1.7.2.1]
* release notes for
+ link:RelNotes-1.7.2.1.txt[1.7.2.1],
+ link:RelNotes-1.7.2.txt[1.7.2].
+
+* link:v1.7.1.2/git.html[documentation for release 1.7.1.2]
+
+* release notes for
+ link:RelNotes-1.7.1.2.txt[1.7.1.2],
link:RelNotes-1.7.1.1.txt[1.7.1.1],
link:RelNotes-1.7.1.txt[1.7.1].
-* link:v1.7.0.6/git.html[documentation for release 1.7.0.6]
+* link:v1.7.0.7/git.html[documentation for release 1.7.0.7]
* release notes for
+ link:RelNotes-1.7.0.7.txt[1.7.0.7],
link:RelNotes-1.7.0.6.txt[1.7.0.6],
link:RelNotes-1.7.0.5.txt[1.7.0.5],
link:RelNotes-1.7.0.4.txt[1.7.0.4],
<david@dgreaves.com>, and later enhanced greatly by the
contributors on the git-list <git@vger.kernel.org>.
+Reporting Bugs
+--------------
+
+Report bugs to the Git mailing list <git@vger.kernel.org> where the
+development and maintenance is primarily done. You do not have to be
+subscribed to the list to send a message there.
+
SEE ALSO
--------
linkgit:gittutorial[7], linkgit:gittutorial-2[7],
--pretty[='<format>']::
---format[='<format>']::
+--format='<format>'::
Pretty-print the contents of the commit logs in a given format,
where '<format>' can be one of 'oneline', 'short', 'medium',
#!/bin/sh
GVF=GIT-VERSION-FILE
-DEF_VER=v1.7.1.GIT
+DEF_VER=v1.7.2.GIT
LF='
'
It has been reported that docbook-xsl version 1.72 and 1.73 are
buggy; 1.72 misformats manual pages for callouts, and 1.73 needs
the patch in contrib/patches/docbook-xsl-manpages-charmap.patch
+
+ Users attempting to build the documentation on Cygwin may need to ensure
+ that the /etc/xml/catalog file looks something like this:
+
+ <?xml version="1.0"?>
+ <!DOCTYPE catalog PUBLIC
+ "-//OASIS//DTD Entity Resolution XML Catalog V1.0//EN"
+ "http://www.oasis-open.org/committees/entity/release/1.0/catalog.dtd"
+ >
+ <catalog xmlns="urn:oasis:names:tc:entity:xmlns:xml:catalog">
+ <rewriteURI
+ uriStartString = "http://docbook.sourceforge.net/release/xsl/current"
+ rewritePrefix = "/usr/share/sgml/docbook/xsl-stylesheets"
+ />
+ <rewriteURI
+ uriStartString="http://www.oasis-open.org/docbook/xml/4.5"
+ rewritePrefix="/usr/share/sgml/docbook/xml-dtd-4.5"
+ />
+ </catalog>
+
+ This can be achieved with the following two xmlcatalog commands:
+
+ xmlcatalog --noout \
+ --add rewriteURI \
+ http://docbook.sourceforge.net/release/xsl/current \
+ /usr/share/sgml/docbook/xsl-stylesheets \
+ /etc/xml/catalog
+
+ xmlcatalog --noout \
+ --add rewriteURI \
+ http://www.oasis-open.org/docbook/xml/4.5/xsl/current \
+ /usr/share/sgml/docbook/xml-dtd-4.5 \
+ /etc/xml/catalog
builtin/commit.o builtin/revert.o wt-status.o: wt-status.h
builtin/tar-tree.o archive-tar.o: tar.h
builtin/pack-objects.o: thread-utils.h
+connect.o transport.o http-backend.o: url.h
http-fetch.o http-walker.o remote-curl.o transport.o walker.o: walker.h
-http.o http-walker.o http-push.o remote-curl.o: http.h
+http.o http-walker.o http-push.o http-fetch.o remote-curl.o: http.h
xdiff-interface.o $(XDIFF_OBJS): \
xdiff/xinclude.h xdiff/xmacros.h xdiff/xdiff.h xdiff/xtypes.h \
documented,gitglossary | \
documented,githooks | \
documented,gitrepository-layout | \
+ documented,gitrevisions | \
documented,gittutorial | \
documented,gittutorial-2 | \
documented,git-bisect-lk2009 | \
-Documentation/RelNotes-1.7.2.txt
\ No newline at end of file
+Documentation/RelNotes-1.7.2.1.txt
\ No newline at end of file
#define say1(a,b) fprintf(stderr, a, b)
#define say2(a,b,c) fprintf(stderr, a, b, c)
#else
-#define say(a) do {} while(0)
-#define say1(a,b) do {} while(0)
-#define say2(a,b,c) do {} while(0)
+#define say(a) do { /* nothing */ } while (0)
+#define say1(a,b) do { /* nothing */ } while (0)
+#define say2(a,b,c) do { /* nothing */ } while (0)
#endif
static const char en85[] = {
"The following paths are ignored by one of your .gitignore files:\n";
static int verbose = 0, show_only = 0, ignored_too = 0, refresh_only = 0;
-static int ignore_add_errors, addremove, intent_to_add;
+static int ignore_add_errors, addremove, intent_to_add, ignore_missing = 0;
static struct option builtin_add_options[] = {
OPT__DRY_RUN(&show_only),
OPT_BOOLEAN('A', "all", &addremove, "add all, noticing removal of tracked files"),
OPT_BOOLEAN( 0 , "refresh", &refresh_only, "don't add, only refresh the index"),
OPT_BOOLEAN( 0 , "ignore-errors", &ignore_add_errors, "just skip files which cannot be added because of errors"),
+ OPT_BOOLEAN( 0 , "ignore-missing", &ignore_missing, "check if - even missing - files are ignored in dry run"),
OPT_END(),
};
if (addremove && take_worktree_changes)
die("-A and -u are mutually incompatible");
+ if (!show_only && ignore_missing)
+ die("Option --ignore-missing can only be used together with --dry-run");
if ((addremove || take_worktree_changes) && !argc) {
static const char *here[2] = { ".", NULL };
argc = 1;
seen = find_used_pathspec(pathspec);
for (i = 0; pathspec[i]; i++) {
if (!seen[i] && pathspec[i][0]
- && !file_exists(pathspec[i]))
- die("pathspec '%s' did not match any files",
- pathspec[i]);
+ && !file_exists(pathspec[i])) {
+ if (ignore_missing) {
+ if (excluded(&dir, pathspec[i], DT_UNKNOWN))
+ dir_add_ignored(&dir, pathspec[i], strlen(pathspec[i]));
+ } else
+ die("pathspec '%s' did not match any files",
+ pathspec[i]);
+ }
}
free(seen);
}
*dst = '\0';
}
+static int check_ref_format_branch(const char *arg)
+{
+ struct strbuf sb = STRBUF_INIT;
+ int nongit;
+
+ setup_git_directory_gently(&nongit);
+ if (strbuf_check_branch_ref(&sb, arg))
+ die("'%s' is not a valid branch name", arg);
+ printf("%s\n", sb.buf + 11);
+ return 0;
+}
+
+static int check_ref_format_print(const char *arg)
+{
+ char *refname = xmalloc(strlen(arg) + 1);
+
+ if (check_ref_format(arg))
+ return 1;
+ collapse_slashes(refname, arg);
+ printf("%s\n", refname);
+ return 0;
+}
+
int cmd_check_ref_format(int argc, const char **argv, const char *prefix)
{
if (argc == 2 && !strcmp(argv[1], "-h"))
usage(builtin_check_ref_format_usage);
- if (argc == 3 && !strcmp(argv[1], "--branch")) {
- struct strbuf sb = STRBUF_INIT;
-
- if (strbuf_check_branch_ref(&sb, argv[2]))
- die("'%s' is not a valid branch name", argv[2]);
- printf("%s\n", sb.buf + 11);
- exit(0);
- }
- if (argc == 3 && !strcmp(argv[1], "--print")) {
- char *refname = xmalloc(strlen(argv[2]) + 1);
-
- if (check_ref_format(argv[2]))
- exit(1);
- collapse_slashes(refname, argv[2]);
- printf("%s\n", refname);
- exit(0);
- }
+ if (argc == 3 && !strcmp(argv[1], "--branch"))
+ return check_ref_format_branch(argv[2]);
+ if (argc == 3 && !strcmp(argv[1], "--print"))
+ return check_ref_format_print(argv[2]);
if (argc != 2)
usage(builtin_check_ref_format_usage);
return !!check_ref_format(argv[1]);
"terminate entries with NUL"),
OPT_BOOLEAN(0, "amend", &amend, "amend previous commit"),
OPT_BOOLEAN(0, "no-post-rewrite", &no_post_rewrite, "bypass post-rewrite hook"),
- { OPTION_STRING, 'u', "untracked-files", &untracked_files_arg, "mode", "show untracked files, optional modes: all, normal, no. (Default: all)", PARSE_OPT_OPTARG, NULL, (intptr_t)"all" },
+ { OPTION_STRING, 'u', "untracked-files", &untracked_files_arg, "mode", "show untracked files, optional modes: all, normal, no (Default: all)", PARSE_OPT_OPTARG, NULL, (intptr_t)"all" },
/* end commit contents options */
{ OPTION_BOOLEAN, 0, "allow-empty", &allow_empty, NULL,
else if (ents == 2)
result = builtin_diff_tree(&rev, argc, argv, ent);
else if (ent[0].item->flags & UNINTERESTING) {
- /*
- * Perhaps the user gave us A...B, which expands
- * to a list of negative merge bases followed by
- * A (symmetric-left) and B? Let's make sure...
- */
- for (i = 1; i < ents; i++)
- if (!(ent[i].item->flags & UNINTERESTING))
- break;
- if (ents != i + 2 ||
- (ent[i+1].item->flags & UNINTERESTING) ||
- (!(ent[i].item->flags & SYMMETRIC_LEFT)) ||
- (ent[i+1].item->flags & SYMMETRIC_LEFT))
- die("what do you mean by that?");
/*
* diff A...B where there is at least one merge base
* between A and B. We have ent[0] == merge-base,
int exit_code;
if (!remote)
- die("Where do you want to fetch from today?");
+ die("No remote repository specified. Please, specify either a URL or a\n"
+ "remote name from which new revisions should be fetched.");
transport = transport_get(remote, NULL);
transport_set_verbosity(transport, verbosity, progress);
if (!path)
path = "emacsclient";
strbuf_addf(&man_page, "(woman \"%s\")", page);
- execlp(path, "emacsclient", "-e", man_page.buf, NULL);
+ execlp(path, "emacsclient", "-e", man_page.buf, (char *)NULL);
warning("failed to exec '%s': %s", path, strerror(errno));
}
}
} else
path = "kfmclient";
strbuf_addf(&man_page, "man:%s(1)", page);
- execlp(path, filename, "newTab", man_page.buf, NULL);
+ execlp(path, filename, "newTab", man_page.buf, (char *)NULL);
warning("failed to exec '%s': %s", path, strerror(errno));
}
}
{
if (!path)
path = "man";
- execlp(path, "man", page, NULL);
+ execlp(path, "man", page, (char *)NULL);
warning("failed to exec '%s': %s", path, strerror(errno));
}
{
struct strbuf shell_cmd = STRBUF_INIT;
strbuf_addf(&shell_cmd, "%s %s", cmd, page);
- execl("/bin/sh", "sh", "-c", shell_cmd.buf, NULL);
+ execl("/bin/sh", "sh", "-c", shell_cmd.buf, (char *)NULL);
warning("failed to exec '%s': %s", cmd, strerror(errno));
}
{
const char *page = cmd_to_page(git_cmd);
setenv("INFOPATH", system_path(GIT_INFO_PATH), 1);
- execlp("info", "info", "gitman", page, NULL);
+ execlp("info", "info", "gitman", page, (char *)NULL);
die("no info viewer handled the request");
}
#ifndef open_html
static void open_html(const char *path)
{
- execl_git_cmd("web--browse", "-c", "help.browser", path, NULL);
+ execl_git_cmd("web--browse", "-c", "help.browser", path, (char *)NULL);
}
#endif
if (argc == 2 && !strcmp(argv[1], "-h"))
usage(index_pack_usage);
+ read_replace_refs = 0;
+
/*
* We wish to read the repository's config file if any, and
* for that it is necessary to call setup_git_directory_gently().
static int show_killed;
static int show_valid_bit;
static int line_terminator = '\n';
+static int debug_mode;
static const char *prefix;
static int max_prefix_len;
ce_stage(ce));
}
write_name(ce->name, ce_namelen(ce));
+ if (debug_mode) {
+ printf(" ctime: %d:%d\n", ce->ce_ctime.sec, ce->ce_ctime.nsec);
+ printf(" mtime: %d:%d\n", ce->ce_mtime.sec, ce->ce_mtime.nsec);
+ printf(" dev: %d\tino: %d\n", ce->ce_dev, ce->ce_ino);
+ printf(" uid: %d\tgid: %d\n", ce->ce_uid, ce->ce_gid);
+ printf(" size: %d\tflags: %x\n", ce->ce_size, ce->ce_flags);
+ }
}
static int show_one_ru(struct string_list_item *item, void *cbdata)
OPT_STRING(0, "with-tree", &with_tree, "tree-ish",
"pretend that paths removed since <tree-ish> are still present"),
OPT__ABBREV(&abbrev),
+ OPT_BOOLEAN(0, "debug", &debug_mode, "show debugging data"),
OPT_END()
};
struct notes_tree *t;
int show_only = 0, verbose = 0;
struct option options[] = {
- OPT_BOOLEAN('n', NULL, &show_only, "do not remove, show only"),
- OPT_BOOLEAN('v', NULL, &verbose, "report pruned notes"),
+ OPT_BOOLEAN('n', "dry-run", &show_only,
+ "do not remove, show only"),
+ OPT_BOOLEAN('v', "verbose", &verbose, "report pruned notes"),
OPT_END()
};
{
struct rev_info revs;
const struct option options[] = {
- OPT_BOOLEAN('n', NULL, &show_only,
+ OPT_BOOLEAN('n', "dry-run", &show_only,
"do not remove, show only"),
- OPT_BOOLEAN('v', NULL, &verbose,
- "report pruned objects"),
+ OPT_BOOLEAN('v', "verbose", &verbose, "report pruned objects"),
OPT_DATE(0, "expire", &expire,
"expire objects older than <time>"),
OPT_END()
static const char **refspec;
static int refspec_nr;
+static int refspec_alloc;
static void add_refspec(const char *ref)
{
- int nr = refspec_nr + 1;
- refspec = xrealloc(refspec, nr * sizeof(char *));
- refspec[nr-1] = ref;
- refspec_nr = nr;
+ refspec_nr++;
+ ALLOC_GROW(refspec, refspec_nr, refspec_alloc);
+ refspec[refspec_nr-1] = ref;
}
static void set_refspecs(const char **refs, int nr)
if (nonfastforward && advice_push_nonfastforward) {
fprintf(stderr, "To prevent you from losing history, non-fast-forward updates were rejected\n"
- "Merge the remote changes before pushing again. See the 'Note about\n"
- "fast-forwards' section of 'git push --help' for details.\n");
+ "Merge the remote changes (e.g. 'git pull') before pushing again. See the\n"
+ "'Note about fast-forwards' section of 'git push --help' for details.\n");
}
return 1;
alloc = alloc_nr(alloc); \
x = xrealloc((x), alloc * sizeof(*(x))); \
} \
- } while(0)
+ } while (0)
/* Initialize and use the cache information */
extern int read_index(struct index_state *);
# Generate header
cat <<-EOF
To: $recipients
- Subject: ${emailprefix}$projectdesc $refname_type, $short_refname, ${change_type}d. $describe
+ Subject: ${emailprefix}$projectdesc $refname_type $short_refname ${change_type}d. $describe
X-Git-Refname: $refname
X-Git-Reftype: $refname_type
X-Git-Oldrev: $oldrev
--- /dev/null
+/*.xml
+/*.1
+/*.html
+/svn-fe
--- /dev/null
+all:: svn-fe$X
+
+CC = gcc
+RM = rm -f
+MV = mv
+
+CFLAGS = -g -O2 -Wall
+LDFLAGS =
+ALL_CFLAGS = $(CFLAGS)
+ALL_LDFLAGS = $(LDFLAGS)
+EXTLIBS =
+
+GIT_LIB = ../../libgit.a
+VCSSVN_LIB = ../../vcs-svn/lib.a
+LIBS = $(VCSSVN_LIB) $(GIT_LIB) $(EXTLIBS)
+
+QUIET_SUBDIR0 = +$(MAKE) -C # space to separate -C and subdir
+QUIET_SUBDIR1 =
+
+ifneq ($(findstring $(MAKEFLAGS),w),w)
+PRINT_DIR = --no-print-directory
+else # "make -w"
+NO_SUBDIR = :
+endif
+
+ifneq ($(findstring $(MAKEFLAGS),s),s)
+ifndef V
+ QUIET_CC = @echo ' ' CC $@;
+ QUIET_LINK = @echo ' ' LINK $@;
+ QUIET_SUBDIR0 = +@subdir=
+ QUIET_SUBDIR1 = ;$(NO_SUBDIR) echo ' ' SUBDIR $$subdir; \
+ $(MAKE) $(PRINT_DIR) -C $$subdir
+endif
+endif
+
+svn-fe$X: svn-fe.o $(VCSSVN_LIB) $(GIT_LIB)
+ $(QUIET_LINK)$(CC) $(ALL_CFLAGS) -o $@ svn-fe.o \
+ $(ALL_LDFLAGS) $(LIBS)
+
+svn-fe.o: svn-fe.c ../../vcs-svn/svndump.h
+ $(QUIET_CC)$(CC) -I../../vcs-svn -o $*.o -c $(ALL_CFLAGS) $<
+
+svn-fe.html: svn-fe.txt
+ $(QUIET_SUBDIR0)../../Documentation $(QUIET_SUBDIR1) \
+ MAN_TXT=../contrib/svn-fe/svn-fe.txt \
+ ../contrib/svn-fe/$@
+
+svn-fe.1: svn-fe.txt
+ $(QUIET_SUBDIR0)../../Documentation $(QUIET_SUBDIR1) \
+ MAN_TXT=../contrib/svn-fe/svn-fe.txt \
+ ../contrib/svn-fe/$@
+ $(MV) ../../Documentation/svn-fe.1 .
+
+../../vcs-svn/lib.a: FORCE
+ $(QUIET_SUBDIR0)../.. $(QUIET_SUBDIR1) vcs-svn/lib.a
+
+../../libgit.a: FORCE
+ $(QUIET_SUBDIR0)../.. $(QUIET_SUBDIR1) libgit.a
+
+clean:
+ $(RM) svn-fe$X svn-fe.o svn-fe.html svn-fe.xml svn-fe.1
+
+.PHONY: all clean FORCE
--- /dev/null
+/*
+ * This file is in the public domain.
+ * You may freely use, modify, distribute, and relicense it.
+ */
+
+#include <stdlib.h>
+#include "svndump.h"
+
+int main(int argc, char **argv)
+{
+ svndump_init(NULL);
+ svndump_read((argc > 1) ? argv[1] : NULL);
+ svndump_reset();
+ return 0;
+}
--- /dev/null
+svn-fe(1)
+=========
+
+NAME
+----
+svn-fe - convert an SVN "dumpfile" to a fast-import stream
+
+SYNOPSIS
+--------
+svnadmin dump --incremental REPO | svn-fe [url] | git fast-import
+
+DESCRIPTION
+-----------
+
+Converts a Subversion dumpfile (version: 2) into input suitable for
+git-fast-import(1) and similar importers. REPO is a path to a
+Subversion repository mirrored on the local disk. Remote Subversion
+repositories can be mirrored on local disk using the `svnsync`
+command.
+
+INPUT FORMAT
+------------
+Subversion's repository dump format is documented in full in
+`notes/dump-load-format.txt` from the Subversion source tree.
+Files in this format can be generated using the 'svnadmin dump' or
+'svk admin dump' command.
+
+OUTPUT FORMAT
+-------------
+The fast-import format is documented by the git-fast-import(1)
+manual page.
+
+NOTES
+-----
+Subversion dumps do not record a separate author and committer for
+each revision, nor a separate display name and email address for
+each author. Like git-svn(1), 'svn-fe' will use the name
+
+---------
+user <user@UUID>
+---------
+
+as committer, where 'user' is the value of the `svn:author` property
+and 'UUID' the repository's identifier.
+
+To support incremental imports, 'svn-fe' will put a `git-svn-id`
+line at the end of each commit log message if passed an url on the
+command line. This line has the form `git-svn-id: URL@REVNO UUID`.
+
+Empty directories and unknown properties are silently discarded.
+
+The resulting repository will generally require further processing
+to put each project in its own repository and to separate the history
+of each branch. The 'git filter-branch --subdirectory-filter' command
+may be useful for this purpose.
+
+BUGS
+----
+Litters the current working directory with .bin files for
+persistence. Will be fixed when the svn-fe infrastructure is aware of
+a Git working directory.
+
+SEE ALSO
+--------
+git-svn(1), svn2git(1), svk(1), git-filter-branch(1), git-fast-import(1),
+https://svn.apache.org/repos/asf/subversion/trunk/notes/dump-load-format.txt
static void strip_prefix(int prefix_length, const char **namep, const char **otherp)
{
/* Strip the prefix but do not molest /dev/null and absolute paths */
- if (*namep && **namep != '/')
+ if (*namep && **namep != '/') {
*namep += prefix_length;
- if (*otherp && **otherp != '/')
+ if (**namep == '/')
+ ++*namep;
+ }
+ if (*otherp && **otherp != '/') {
*otherp += prefix_length;
+ if (**otherp == '/')
+ ++*otherp;
+ }
}
static void run_diff(struct diff_filepair *p, struct diff_options *o)
void diff_setup(struct diff_options *options)
{
memset(options, 0, sizeof(*options));
- memset(&diff_queued_diff, 0, sizeof(diff_queued_diff));
options->file = stdout;
#define MAX_SCORE 60000.0
#define DEFAULT_RENAME_SCORE 30000 /* rename/copy similarity minimum (50%) */
#define DEFAULT_BREAK_SCORE 30000 /* minimum for break to happen (50%) */
-#define DEFAULT_MERGE_SCORE 36000 /* maximum for break-merge to happen 60%) */
+#define DEFAULT_MERGE_SCORE 36000 /* maximum for break-merge to happen (60%) */
#define MINIMUM_BREAK_SIZE 400 /* do not break a file smaller than this */
(q)->queue = NULL; \
(q)->nr = (q)->alloc = 0; \
(q)->run = 0; \
- } while(0);
+ } while (0)
extern struct diff_queue_struct diff_queued_diff;
extern struct diff_filepair *diff_queue(struct diff_queue_struct *,
void diff_debug_filepair(const struct diff_filepair *, int);
void diff_debug_queue(const char *, struct diff_queue_struct *);
#else
-#define diff_debug_filespec(a,b,c) do {} while(0)
-#define diff_debug_filepair(a,b) do {} while(0)
-#define diff_debug_queue(a,b) do {} while(0)
+#define diff_debug_filespec(a,b,c) do { /* nothing */ } while (0)
+#define diff_debug_filepair(a,b) do { /* nothing */ } while (0)
+#define diff_debug_queue(a,b) do { /* nothing */ } while (0)
#endif
extern int diffcore_count_changes(struct diff_filespec *src,
return dir->entries[dir->nr++] = dir_entry_new(pathname, len);
}
-static struct dir_entry *dir_add_ignored(struct dir_struct *dir, const char *pathname, int len)
+struct dir_entry *dir_add_ignored(struct dir_struct *dir, const char *pathname, int len)
{
if (!cache_name_is_other(pathname, len))
return NULL;
extern int excluded_from_list(const char *pathname, int pathlen, const char *basename,
int *dtype, struct exclude_list *el);
extern int excluded(struct dir_struct *, const char *, int *);
+struct dir_entry *dir_add_ignored(struct dir_struct *dir, const char *pathname, int len);
extern int add_excludes_from_file_to_list(const char *fname, const char *base, int baselen,
char **buf_p, struct exclude_list *which, int check_index);
extern void add_excludes_from_file(struct dir_struct *, const char *fname);
if (m->shift) {
for (k = 0; k < 1024; k++) {
if (m->data.sets[k])
- dump_marks_helper(f, (base + k) << m->shift,
+ dump_marks_helper(f, base + (k << m->shift),
m->data.sets[k]);
}
} else {
tk_messageBox \
-icon error \
-type ok \
- -title [mc "git-gui: fatal error"] \
+ -title "git-gui: fatal error" \
-message $err
exit 1
}
}
}
+proc is_config_false {name} {
+ global repo_config
+ if {[catch {set v $repo_config($name)}]} {
+ return 0
+ } elseif {$v eq {false} || $v eq {0} || $v eq {no}} {
+ return 1
+ } else {
+ return 0
+ }
+}
+
proc get_config {name} {
global repo_config
if {[catch {set v $repo_config($name)}]} {
puts stderr $d
}
+#'" fix poor old emacs font-lock mode
+
proc _git_cmd {name} {
global _git_cmd_path
if {![info exists _nice]} {
set _nice [_which nice]
+ if {[catch {exec $_nice git version}]} {
+ set _nice {}
+ }
}
if {$_nice ne {}} {
lappend cmd $_nice
return $text
}
+wm withdraw .
set root_exists 0
bind . <Visibility> {
bind . <Visibility> {}
set default_config(gui.encoding) [encoding system]
set default_config(gui.matchtrackingbranch) false
+set default_config(gui.textconv) true
set default_config(gui.pruneduringfetch) false
set default_config(gui.trustmtime) false
set default_config(gui.fastcopyblame) false
# try to set work tree from environment, falling back to core.worktree
if {[catch { set _gitworktree $env(GIT_WORK_TREE) }]} {
set _gitworktree [get_config core.worktree]
+ if {$_gitworktree eq ""} {
+ set _gitworktree [file dirname [file normalize $_gitdir]]
+ }
}
if {$_prefix ne {}} {
if {$_gitworktree eq {}} {
# freedesktop.org-conforming system is our best shot
set explorer "xdg-open"
}
- eval exec $explorer $_gitworktree &
+ eval exec $explorer [list [file nativename $_gitworktree]] &
}
set is_quitting 0
set current_branch $head
}
+ wm deiconify .
switch -- $subcommand {
browser {
if {$jump_spec ne {}} usage
$ctxmsm add separator
create_common_diff_popup $ctxmsm
+proc has_textconv {path} {
+ if {[is_config_false gui.textconv]} {
+ return 0
+ }
+ set filter [gitattr $path diff set]
+ set textconv [get_config [join [list diff $filter textconv] .]]
+ if {$filter ne {set} && $textconv ne {}} {
+ return 1
+ } else {
+ return 0
+ }
+}
+
proc popup_diff_menu {ctxm ctxmmg ctxmsm x y X Y} {
global current_diff_path file_states
set ::cursorX $x
|| {__} eq $state
|| {_O} eq $state
|| {_T} eq $state
- || {T_} eq $state} {
+ || {T_} eq $state
+ || [has_textconv $current_diff_path]} {
set s disabled
} else {
set s normal
# -- Load geometry
#
-catch {
-set gm $repo_config(gui.geometry)
-wm geometry . [lindex $gm 0]
-if {$use_ttk} {
- .vpane sashpos 0 [lindex $gm 1]
- .vpane.files sashpos 0 [lindex $gm 2]
-} else {
- .vpane sash place 0 \
- [lindex $gm 1] \
- [lindex [.vpane sash coord 0] 1]
- .vpane.files sash place 0 \
- [lindex [.vpane.files sash coord 0] 0] \
- [lindex $gm 2]
+proc on_ttk_pane_mapped {w pane pos} {
+ bind $w <Map> {}
+ after 0 [list after idle [list $w sashpos $pane $pos]]
+}
+proc on_tk_pane_mapped {w pane x y} {
+ bind $w <Map> {}
+ after 0 [list after idle [list $w sash place $pane $x $y]]
+}
+proc on_application_mapped {} {
+ global repo_config use_ttk
+ bind . <Map> {}
+ set gm $repo_config(gui.geometry)
+ if {$use_ttk} {
+ bind .vpane <Map> \
+ [list on_ttk_pane_mapped %W 0 [lindex $gm 1]]
+ bind .vpane.files <Map> \
+ [list on_ttk_pane_mapped %W 0 [lindex $gm 2]]
+ } else {
+ bind .vpane <Map> \
+ [list on_tk_pane_mapped %W 0 \
+ [lindex $gm 1] \
+ [lindex [.vpane sash coord 0] 1]]
+ bind .vpane.files <Map> \
+ [list on_tk_pane_mapped %W 0 \
+ [lindex [.vpane.files sash coord 0] 0] \
+ [lindex $gm 2]]
+ }
+ wm geometry . [lindex $gm 0]
}
-unset gm
+if {[info exists repo_config(gui.geometry)]} {
+ bind . <Map> [list on_application_mapped]
+ wm geometry . [lindex $repo_config(gui.geometry) 0]
}
# -- Load window state
#
-catch {
-set gws $repo_config(gui.wmstate)
-wm state . $gws
-unset gws
+if {[info exists repo_config(gui.wmstate)]} {
+ catch {wm state . $repo_config(gui.wmstate)}
}
# -- Key Bindings
$status show [mc "Reading %s..." "$commit:[escape_path $path]"]
$w_path conf -text [escape_path $path]
+
+ set do_textconv 0
+ if {![is_config_false gui.textconv] && [git-version >= 1.7.2]} {
+ set filter [gitattr $path diff set]
+ set textconv [get_config [join [list diff $filter textconv] .]]
+ if {$filter ne {set} && $textconv ne {}} {
+ set do_textconv 1
+ }
+ }
if {$commit eq {}} {
- set fd [open $path r]
+ if {$do_textconv ne 0} {
+ set fd [open |[list $textconv $path] r]
+ } else {
+ set fd [open $path r]
+ }
fconfigure $fd -eofchar {}
} else {
- set fd [git_read cat-file blob "$commit:$path"]
+ if {$do_textconv ne 0} {
+ set fd [git_read cat-file --textconv "$commit:$path"]
+ } else {
+ set fd [git_read cat-file blob "$commit:$path"]
+ }
}
fconfigure $fd \
-blocking 0 \
$opts insert end [mc "Clone Existing Repository"] link_clone
$opts insert end "\n"
if {$m_repo ne {}} {
+ if {[tk windowingsystem] eq "win32"} {
+ set key L
+ } else {
+ set key C
+ }
$m_repo add command \
-command [cb _next clone] \
- -accelerator $M1T-C \
+ -accelerator $M1T-$key \
-label [mc "Clone..."]
- bind $top <$M1B-c> [cb _next clone]
- bind $top <$M1B-C> [cb _next clone]
+ bind $top <$M1B-[string tolower $key]> [cb _next clone]
+ bind $top <$M1B-[string toupper $key]> [cb _next clone]
}
$opts tag conf link_open -foreground blue -underline 1
set path $current_diff_path
set s $file_states($path)
- if {[lindex $s 0] ne {_M}} return
+ if {[lindex $s 0] ne {_M} || [has_textconv $path]} return
# Prevent infinite rescan loops
incr diff_empty_count
lappend cmd diff-files
}
}
+ if {![is_config_false gui.textconv] && [git-version >= 1.6.1]} {
+ lappend cmd --textconv
+ }
if {[string match {160000 *} [lindex $s 2]]
|| [string match {160000 *} [lindex $s 3]]} {
{b gui.trustmtime {mc "Trust File Modification Timestamps"}}
{b gui.pruneduringfetch {mc "Prune Tracking Branches During Fetch"}}
{b gui.matchtrackingbranch {mc "Match Tracking Branches"}}
+ {b gui.textconv {mc "Use Textconv For Diffs and Blames"}}
{b gui.fastcopyblame {mc "Blame Copy Only On Changed Files"}}
{i-20..200 gui.copyblamethreshold {mc "Minimum Letters To Blame Copy On"}}
{i-0..300 gui.blamehistoryctx {mc "Blame History Context Radius (days)"}}
[info nameofexecutable] \
[file normalize $::argv0] \
] \
- [file normalize [$_gitworktree]]
+ [file normalize $_gitworktree]
} err]} {
error_popup [strcat [mc "Cannot write shortcut:"] "\n\n$err"]
}
$sh -c \
"CHERE_INVOKING=1 source /etc/profile;[sq $me] &" \
] \
- [file normalize [$_gitworktree]]
+ [file normalize $_gitworktree]
} err]} {
error_popup [strcat [mc "Cannot write shortcut:"] "\n\n$err"]
}
}
constructor two_line {path} {
+ global NS
set w $path
set w_l $w.l
set w_c $w.c
eval [list exec wscript.exe \
/E:jscript \
/nologo \
- [file join $oguilib win32_shortcut.js] \
+ [file nativename [file join $oguilib win32_shortcut.js]] \
$lnk_path \
- [file join $oguilib git-gui.ico] \
+ [file nativename [file join $oguilib git-gui.ico]] \
$lnk_dir \
$lnk_exec] $lnk_args
}
incr argc -2
}
-set bindir [file dirname \
+set basedir [file dirname \
[file dirname \
[file dirname [info script]]]]
-set bindir [file join $bindir bin]
+set bindir [file join $basedir bin]
+set bindir "$bindir;[file join $basedir mingw bin]"
regsub -all ";" $bindir "\\;" bindir
set env(PATH) "$bindir;$env(PATH)"
unset bindir
resolve_full_httpd () {
case "$httpd" in
- *apache2*|*lighttpd*)
+ *apache2*|*lighttpd*|*httpd*)
+ # yes, *httpd* covers *lighttpd* above, but it is there for clarity
# ensure that the apache2/lighttpd command ends with "-f"
if ! echo "$httpd" | sane_grep -- '-f *$' >/dev/null 2>&1
then
httpd_only="${httpd%% *}" # cut on first space
return
;;
+ *webrick*)
+ # server is started by running via generated webrick.rb in
+ # $fqgitdir/gitweb
+ full_httpd="$fqgitdir/gitweb/webrick.rb"
+ httpd_only="${httpd%% *}" # cut on first space
+ return
+ ;;
esac
httpd_only="$(echo $httpd | cut -f1 -d' ')"
export GIT_EXEC_PATH GIT_DIR GITWEB_CONFIG
webrick_conf () {
+ # webrick seems to have no way of passing arbitrary environment
+ # variables to the underlying CGI executable, so we wrap the
+ # actual gitweb.cgi using a shell script to force it
+ wrapper="$fqgitdir/gitweb/$httpd/wrapper.sh"
+ cat > "$wrapper" <<EOF
+#!/bin/sh
+# we use this shell script wrapper around the real gitweb.cgi since
+# there appears to be no other way to pass arbitrary environment variables
+# into the CGI process
+GIT_EXEC_PATH=$GIT_EXEC_PATH GIT_DIR=$GIT_DIR GITWEB_CONFIG=$GITWEB_CONFIG
+export GIT_EXEC_PATH GIT_DIR GITWEB_CONFIG
+exec $root/gitweb.cgi
+EOF
+ chmod +x "$wrapper"
+
+ # This assumes _ruby_ is in the user's $PATH. that's _one_
+ # portable way to run ruby, which could be installed anywhere, really.
# generate a standalone server script in $fqgitdir/gitweb.
cat >"$fqgitdir/gitweb/$httpd.rb" <<EOF
+#!/usr/bin/env ruby
require 'webrick'
-require 'yaml'
-options = YAML::load_file(ARGV[0])
-options[:StartCallback] = proc do
- File.open(options[:PidFile],"w") do |f|
- f.puts Process.pid
- end
-end
-options[:ServerType] = WEBrick::Daemon
+require 'logger'
+options = {
+ :Port => $port,
+ :DocumentRoot => "$root",
+ :Logger => Logger.new('$fqgitdir/gitweb/error.log'),
+ :AccessLog => [
+ [ Logger.new('$fqgitdir/gitweb/access.log'),
+ WEBrick::AccessLog::COMBINED_LOG_FORMAT ]
+ ],
+ :DirectoryIndex => ["gitweb.cgi"],
+ :CGIInterpreter => "$wrapper",
+ :StartCallback => lambda do
+ File.open("$fqgitdir/pid", "w") { |f| f.puts Process.pid }
+ end,
+ :ServerType => WEBrick::Daemon,
+}
+options[:BindAddress] = '127.0.0.1' if "$local" == "true"
server = WEBrick::HTTPServer.new(options)
['INT', 'TERM'].each do |signal|
trap(signal) {server.shutdown}
end
server.start
EOF
- # generate a shell script to invoke the above ruby script,
- # which assumes _ruby_ is in the user's $PATH. that's _one_
- # portable way to run ruby, which could be installed anywhere,
- # really.
- cat >"$fqgitdir/gitweb/$httpd" <<EOF
-#!/bin/sh
-exec ruby "$fqgitdir/gitweb/$httpd.rb" \$*
-EOF
- chmod +x "$fqgitdir/gitweb/$httpd"
-
- cat >"$conf" <<EOF
-:Port: $port
-:DocumentRoot: "$root"
-:DirectoryIndex: ["gitweb.cgi"]
-:PidFile: "$fqgitdir/pid"
-EOF
- test "$local" = true && echo ':BindAddress: "127.0.0.1"' >> "$conf"
+ chmod +x "$fqgitdir/gitweb/$httpd.rb"
+ # configuration is embedded in server script file, webrick.rb
+ rm -f "$conf"
}
lighttpd_conf () {
}
apache2_conf () {
- test -z "$module_path" && module_path=/usr/lib/apache2/modules
+ if test -z "$module_path"
+ then
+ test -d "/usr/lib/httpd/modules" &&
+ module_path="/usr/lib/httpd/modules"
+ test -d "/usr/lib/apache2/modules" &&
+ module_path="/usr/lib/apache2/modules"
+ fi
bind=
test x"$local" = xtrue && bind='127.0.0.1:'
echo 'text/css css' > "$fqgitdir/mime.types"
Listen $bind$port
EOF
- for mod in mime dir; do
- if test -e $module_path/mod_${mod}.so; then
+ for mod in mime dir env log_config
+ do
+ if test -e $module_path/mod_${mod}.so
+ then
echo "LoadModule ${mod}_module " \
"$module_path/mod_${mod}.so" >> "$conf"
fi
cat >> "$conf" <<EOF
LoadModule perl_module $module_path/mod_perl.so
PerlPassEnv GIT_DIR
-PerlPassEnv GIT_EXEC_DIR
+PerlPassEnv GIT_EXEC_PATH
PerlPassEnv GITWEB_CONFIG
<Location /gitweb.cgi>
SetHandler perl-script
echo "ScriptSock logs/gitweb.sock" >> "$conf"
fi
cat >> "$conf" <<EOF
+PassEnv GIT_DIR
+PassEnv GIT_EXEC_PATH
+PassEnv GITWEB_CONFIG
AddHandler cgi-script .cgi
<Location /gitweb.cgi>
Options +ExecCGI
*lighttpd*)
lighttpd_conf
;;
-*apache2*)
+*apache2*|*httpd*)
apache2_conf
;;
webrick)
export GIT_CHERRY_PICK_HELP
warn () {
- echo "$*" >&2
+ printf '%s\n' "$*" >&2
}
output () {
fd=1
;;
esac
- echo "$command${sha1:+ }$sha1${rest:+ }$rest" >&$fd
+ printf '%s\n' "$command${sha1:+ }$sha1${rest:+ }$rest" >&$fd
done <"$TODO" >"$TODO.new" 3>>"$DONE" &&
mv -f "$TODO".new "$TODO" &&
case "$(peek_next_command)" in
case " $used" in
*" $sha1 "*) continue ;;
esac
- echo "$pick $sha1 $message"
+ printf '%s\n' "$pick $sha1 $message"
while read -r squash action msg
do
case "$message" in
"$msg"*)
- echo "$action $squash $action! $msg"
+ printf '%s\n' "$action $squash $action! $msg"
used="$used$squash "
;;
esac
do
if test t != "$PRESERVE_MERGES"
then
- echo "pick $shortsha1 $rest" >> "$TODO"
+ printf '%s\n' "pick $shortsha1 $rest" >> "$TODO"
else
sha1=$(git rev-parse $shortsha1)
if test -z "$REBASE_ROOT"
if test f = "$preserve"
then
touch "$REWRITTEN"/$sha1
- echo "pick $shortsha1 $rest" >> "$TODO"
+ printf '%s\n' "pick $shortsha1 $rest" >> "$TODO"
fi
fi
done
test -d "$dotest" -o -d "$GIT_DIR"/rebase-apply ||
die "No rebase in progress?"
+ git update-index --ignore-submodules --refresh &&
git diff-files --quiet --ignore-submodules || {
echo "You must edit all merge conflicts and then"
echo "mark them as resolved using git add"
--root)
rebase_root=t
;;
- -f|--f|--fo|--for|--forc|force|--force-r|--force-re|--force-reb|--force-reba|--force-rebas|--force-rebase|--no-ff)
+ -f|--f|--fo|--for|--forc|--force|--force-r|--force-re|--force-reb|--force-reba|--force-rebas|--force-rebase|--no-ff)
force_rebase=t
;;
--rerere-autoupdate|--no-rerere-autoupdate)
# Copyright (c) 2007 Lars Hjemli
dashless=$(basename "$0" | sed -e 's/-/ /')
-USAGE="[--quiet] add [-b branch] [--reference <repository>] [--] <repository> [<path>]
+USAGE="[--quiet] add [-b branch] [-
f|--force] [--reference <repository>] [--] <repository> [<path>]
or: $dashless [--quiet] status [--cached] [--recursive] [--] [<path>...]
or: $dashless [--quiet] init [--] [<path>...]
or: $dashless [--quiet] update [--init] [-N|--no-fetch] [--rebase] [--reference <repository>] [--merge] [--recursive] [--] [<path>...]
command=
branch=
+force=
reference=
cached=
recursive=
branch=$2
shift
;;
+ -f | --force)
+ force=$1
+ ;;
-q|--quiet)
GIT_QUIET=1
;;
git ls-files --error-unmatch "$path" > /dev/null 2>&1 &&
die "'$path' already exists in the index"
+ if test -z "$force" && ! git add --dry-run --ignore-missing "$path" > /dev/null 2>&1
+ then
+ echo >&2 "The following path is ignored by one of your .gitignore files:" &&
+ echo >&2 $path &&
+ echo >&2 "Use -f if you really want to add it."
+ exit 1
+ fi
+
# perhaps the path exists and is already a git repo, else clone it
if test -e "$path"
then
) || die "Unable to checkout submodule '$path'"
fi
- git add --force "$path" ||
+ git add $force "$path" ||
die "Failed to add submodule '$path'"
git config -f .gitmodules submodule."$path".path "$path" &&
sub cmd_dcommit {
my $head = shift;
+ command_noisy(qw/update-index --refresh/);
git_cmd_try { command_oneline(qw/diff-index --quiet HEAD/) }
'Cannot dcommit with a dirty index. Commit your changes first, '
. "or stash them with `git stash'.\n";
die("svn-remote.$remote: remote ref '$remote_ref' "
. "must start with 'refs/'\n")
unless $remote_ref =~ m{^refs/};
+ $local_ref = uri_decode($local_ref);
$r->{$remote}->{fetch}->{$local_ref} = $remote_ref;
$r->{$remote}->{svm} = {} if $use_svm_props;
} elsif (m!^(.+)\.usesvmprops=\s*(.*)\s*$!) {
die("svn-remote.$remote: remote ref '$remote_ref' ($t) "
. "must start with 'refs/'\n")
unless $remote_ref =~ m{^refs/};
+ $local_ref = uri_decode($local_ref);
my $rs = {
t => $t,
remote => $remote,
LIST_CACHE => 'FAULT',
;
}
+
+ sub unmemoize_svn_mergeinfo_functions {
+ return if not $memoized;
+ $memoized = 0;
+
+ Memoize::unmemoize 'lookup_svn_merge';
+ Memoize::unmemoize 'check_cherry_pick';
+ Memoize::unmemoize 'has_no_changes';
+ }
+}
+
+END {
+ # Force cache writeout explicitly instead of waiting for
+ # global destruction to avoid segfault in Storable:
+ # http://rt.cpan.org/Public/Bug/Display.html?id=36087
+ unmemoize_svn_mergeinfo_functions();
}
sub parents_exclude {
$self->{absent_dir} = {};
$self->{absent_file} = {};
$self->{gii} = $git_svn->tmp_index_do(sub { Git::IndexInfo->new });
+ $self->{pathnameencoding} = Git::config('svn.pathnameencoding');
$self;
}
sub git_path {
my ($self, $path) = @_;
+ if (my $enc = $self->{pathnameencoding}) {
+ require Encode;
+ Encode::from_to($path, 'UTF-8', $enc);
+ }
if ($self->{path_strip}) {
$path =~ s!$self->{path_strip}!! or
die "Failed to strip path '$path' ($self->{path_strip})\n";
sub repo_path {
my ($self, $path) = @_;
+ if (my $enc = $self->{pathnameencoding}) {
+ require Encode;
+ Encode::from_to($path, $enc, 'UTF-8');
+ }
$self->{path_prefix}.(defined $path ? $path : '');
}
valid_tool() {
case "$1" in
- firefox | iceweasel | chrome | chromium | konqueror | w3m | links | lynx | dillo | open | start)
+ firefox | iceweasel | chrome | google-chrome | chromium | konqueror | w3m | links | lynx | dillo | open | start)
;; # happy
*)
valid_custom_tool "$1" || return 1
if test -z "$browser" ; then
if test -n "$DISPLAY"; then
- browser_candidates="firefox iceweasel chrome chromium konqueror w3m links lynx dillo"
+ browser_candidates="firefox iceweasel google-chrome chrome chromium konqueror w3m links lynx dillo"
if test "$KDE_FULL_SESSION" = "true"; then
browser_candidates="konqueror $browser_candidates"
fi
test "$vers" -lt 2 && NEWTAB=''
"$browser_path" $NEWTAB "$@" &
;;
- chrome|chromium)
+ google-chrome|chrome|chromium)
# Actual command for chromium is chromium-browser.
# No need to specify newTab. It's default in chromium
eval "$browser_path" "$@" &
"git [--version] [--exec-path[=GIT_EXEC_PATH]] [--html-path]\n"
" [-p|--paginate|--no-pager] [--no-replace-objects]\n"
" [--bare] [--git-dir=GIT_DIR] [--work-tree=GIT_WORK_TREE]\n"
- " [-c name=value\n"
- " [--help] COMMAND [ARGS]";
+ " [-c name=value] [--help]\n"
+ " COMMAND [ARGS]";
const char git_more_info_string[] =
"See 'git help COMMAND' for more information on a specific command.";
# Leave it undefined (or set to 'undef') to turn off load checking.
our $maxload = 300;
+# configuration for 'highlight' (http://www.andre-simon.de/)
+# match by basename
+our %highlight_basename = (
+ #'Program' => 'py',
+ #'Library' => 'py',
+ 'SConstruct' => 'py', # SCons equivalent of Makefile
+ 'Makefile' => 'make',
+);
+# match by extension
+our %highlight_ext = (
+ # main extensions, defining name of syntax;
+ # see files in /usr/share/highlight/langDefs/ directory
+ map { $_ => $_ }
+ qw(py c cpp rb java css php sh pl js tex bib xml awk bat ini spec tcl),
+ # alternate extensions, see /etc/highlight/filetypes.conf
+ 'h' => 'c',
+ map { $_ => 'cpp' } qw(cxx c++ cc),
+ map { $_ => 'php' } qw(php3 php4),
+ map { $_ => 'pl' } qw(perl pm), # perhaps also 'cgi'
+ 'mak' => 'make',
+ map { $_ => 'xml' } qw(xhtml html htm),
+);
+
# You define site-wide feature defaults here; override them with
# $GITWEB_CONFIG as necessary.
our %feature = (
run_request();
- $pre_dispatch_hook->()
+ $post_dispatch_hook->()
if $post_dispatch_hook;
last REQUEST if ($is_last_request->());
sub guess_file_syntax {
my ($highlight, $mimetype, $file_name) = @_;
return undef unless ($highlight && defined $file_name);
-
- # configuration for 'highlight' (http://www.andre-simon.de/)
- # match by basename
- my %highlight_basename = (
- #'Program' => 'py',
- #'Library' => 'py',
- 'SConstruct' => 'py', # SCons equivalent of Makefile
- 'Makefile' => 'make',
- );
- # match by extension
- my %highlight_ext = (
- # main extensions, defining name of syntax;
- # see files in /usr/share/highlight/langDefs/ directory
- map { $_ => $_ }
- qw(py c cpp rb java css php sh pl js tex bib xml awk bat ini spec tcl),
- # alternate extensions, see /etc/highlight/filetypes.conf
- 'h' => 'c',
- map { $_ => 'cpp' } qw(cxx c++ cc),
- map { $_ => 'php' } qw(php3 php4),
- map { $_ => 'pl' } qw(perl pm), # perhaps also 'cgi'
- 'mak' => 'make',
- map { $_ => 'xml' } qw(xhtml html htm),
- );
-
my $basename = basename($file_name, '.in');
return $highlight_basename{$basename}
if exists $highlight_basename{$basename};
$paging_nav .= " ⋅ next";
}
- if ($#commitlist >= 100) {
- }
-
git_print_page_nav('','', $hash,$co{'tree'},$hash, $paging_nav);
git_print_header_div('commit', esc_html($co{'title'}), $hash);
- git_search_grep_body(\@commitlist, 0, 99, $next_link);
+ if ($page == 0 && !@commitlist) {
+ print "<p>No match.</p>\n";
+ } else {
+ git_search_grep_body(\@commitlist, 0, 99, $next_link);
+ }
}
if ($searchtype eq 'pickaxe') {
#endif
#if LIBCURL_VERSION_NUM < 0x070704
-#define curl_global_cleanup() do { /* nothing */ } while(0)
+#define curl_global_cleanup() do { /* nothing */ } while (0)
#endif
#if LIBCURL_VERSION_NUM < 0x070800
-#define curl_global_init(a) do { /* nothing */ } while(0)
+#define curl_global_init(a) do { /* nothing */ } while (0)
#endif
#if (LIBCURL_VERSION_NUM < 0x070c04) || (LIBCURL_VERSION_NUM == 0x071000)
while (imap->literal_pending)
get_cmd_result(ctx, NULL);
- bufl = nfsnprintf(buf, sizeof(buf), cmd->cb.data ? CAP(LITERALPLUS) ?
- "%d %s{%d+}\r\n" : "%d %s{%d}\r\n" : "%d %s\r\n",
- cmd->tag, cmd->cmd, cmd->cb.dlen);
+ if (!cmd->cb.data)
+ bufl = nfsnprintf(buf, sizeof(buf), "%d %s\r\n", cmd->tag, cmd->cmd);
+ else
+ bufl = nfsnprintf(buf, sizeof(buf), "%d %s{%d%s}\r\n",
+ cmd->tag, cmd->cmd, cmd->cb.dlen,
+ CAP(LITERALPLUS) ? "+" : "");
+
if (Verbose) {
if (imap->num_in_progress)
printf("(%d in progress) ", imap->num_in_progress);
int gai;
char portstr[6];
- snprintf(portstr, sizeof(portstr), "%hu", srvc->port);
+ snprintf(portstr, sizeof(portstr), "%d", srvc->port);
memset(&hints, 0, sizeof(hints));
hints.ai_socktype = SOCK_STREAM;
return 0;
}
+/*
+ * Remove empty parents, but spare refs/ and immediate subdirs.
+ * Note: munges *name.
+ */
+static void try_remove_empty_parents(char *name)
+{
+ char *p, *q;
+ int i;
+ p = name;
+ for (i = 0; i < 2; i++) { /* refs/{heads,tags,...}/ */
+ while (*p && *p != '/')
+ p++;
+ /* tolerate duplicate slashes; see check_ref_format() */
+ while (*p == '/')
+ p++;
+ }
+ for (q = p; *q; q++)
+ ;
+ while (1) {
+ while (q > p && *q != '/')
+ q--;
+ while (q > p && *(q-1) == '/')
+ q--;
+ if (q == p)
+ break;
+ *q = '\0';
+ if (rmdir(git_path("%s", name)))
+ break;
+ }
+}
+
/* make sure nobody touched the ref, and unlink */
static void prune_ref(struct ref_to_prune *r)
{
if (lock) {
unlink_or_warn(git_path("%s", r->name));
unlock_ref(lock);
+ try_remove_empty_parents(r->name);
}
}
size_t username_len = first_slash - username;
if (username_len == 0) {
const char *home = getenv("HOME");
+ if (!home)
+ goto return_null;
strbuf_add(&user_path, home, strlen(home));
} else {
struct passwd *pw = getpw_str(username, username_len);
rpc->len = n;
err |= post_rpc(rpc);
}
- strbuf_read(&rpc->result, client.out, 0);
close(client.in);
- close(client.out);
client.in = -1;
+ strbuf_read(&rpc->result, client.out, 0);
+
+ close(client.out);
client.out = -1;
err |= finish_command(&client);
goto out_stale;
break;
case 'D': /* we used to emit D but that was misguided. */
- goto out_stale;
- break;
case 'T': /* we used to emit T but nobody uses it. */
goto out_stale;
- break;
default:
error("unrecognized: %s", line);
break;
char path[PATH_MAX];
size_t len = strlen(suspect);
+ if (PATH_MAX <= len + strlen("/objects"))
+ die("Too long path: %.*s", 60, suspect);
strcpy(path, suspect);
if (getenv(DB_ENVIRONMENT)) {
if (access(getenv(DB_ENVIRONMENT), X_OK))
/trash directory*
/test-results
+/.prove
$(RM) -r 'trash directory'.* test-results
$(RM) t????/cvsroot/CVSROOT/?*
$(RM) -r valgrind/bin
+ $(RM) .prove
aggregate-results-and-cleanup: $(T)
$(MAKE) aggregate-results
$(MAKE) clean
aggregate-results:
- for f in test-results/t*-*; do \
+ for f in test-results/t*-*.counts; do \
echo "$$f"; \
done | '$(SHELL_PATH_SQ)' ./aggregate-results.sh
test ...
That way all of the commands in your tests will succeed or fail. If
- you must ignore the return value of something (e.g. the return
- value of export is unportable) it's best to indicate so explicitly
- with a semicolon:
+ you must ignore the return value of something (e.g., the return
+ after unsetting a variable that was already unset is unportable) it's
+ best to indicate so explicitly with a semicolon:
- export HLAGH;
+ unset HLAGH;
git merge hla &&
git push gh &&
test ...
- test_must_fail <git-command>
Run a git command and ensure it fails in a controlled way. Use
- this instead of "! <git-command>" to fail when git commands
- segfault.
+ this instead of "! <git-command>". When git-command dies due to a
+ segfault, test_must_fail diagnoses it as an error; "! <git-command>"
+ treats it as just another expected failure, which would let such a
+ bug go unnoticed.
- test_might_fail <git-command>
GIT_DIR=$PWD/.git
GIT_SVN_DIR=$GIT_DIR/svn/refs/remotes/git-svn
SVN_TREE=$GIT_SVN_DIR/svn-tree
-PERL=${PERL:-perl}
svn >/dev/null 2>&1
if test $? -ne 1
svnconf=$PWD/svnconf
export svnconf
-$PERL -w -e "
+"$PERL_PATH" -w -e "
use SVN::Core;
use SVN::Repos;
\$SVN::Core::VERSION gt '1.1.0' or exit(42);
}
convert_to_rev_db () {
- $PERL -w -- - "$@" <<\EOF
+ "$PERL_PATH" -w -- - "$@" <<\EOF
use strict;
@ARGV == 2 or die "Usage: convert_to_rev_db <input> <output>";
open my $wr, '+>', $ARGV[1] or die "$!: couldn't open: $ARGV[1]";
echo "changed" > path2 &&
git commit -a -m path2 --amend &&
- !(git push -v origin >output 2>&1) &&
+ test_must_fail git push -v origin >output 2>&1 &&
(cd "$REMOTE_REPO" &&
test $HEAD = $(git rev-parse --verify HEAD))
'
git config --path path.trailingtilde "foo~" &&
test_cmp expect .git/config'
+if test "${HOME+set}"
+then
+ test_set_prereq HOMEVAR
+fi
+
cat >expect <<EOF
$HOME/
/dev/null
foo~
EOF
-test_expect_success 'get --path' '
+test_expect_success HOMEVAR 'get --path' '
git config --get --path path.home > result &&
git config --get --path path.normal >> result &&
git config --get --path path.trailingtilde >> result &&
test_cmp expect result
'
+cat >expect <<\EOF
+/dev/null
+foo~
+EOF
+
+test_expect_success 'get --path copes with unset $HOME' '
+ (
+ unset HOME;
+ test_must_fail git config --get --path path.home \
+ >result 2>msg &&
+ git config --get --path path.normal >>result &&
+ git config --get --path path.trailingtilde >>result
+ ) &&
+ grep "[Ff]ailed to expand.*~/" msg &&
+ test_cmp expect result
+'
+
rm .git/config
git config quote.leading " test"
refname2=$(git check-ref-format --branch @{-2}) &&
test "$refname2" = master'
+test_expect_success 'check-ref-format --branch from subdir' '
+ mkdir subdir &&
+
+ T=$(git write-tree) &&
+ sha1=$(echo A | git commit-tree $T) &&
+ git update-ref refs/heads/master $sha1 &&
+ git update-ref refs/remotes/origin/master $sha1
+ git checkout master &&
+ git checkout origin/master &&
+ git checkout master &&
+ refname=$(
+ cd subdir &&
+ git check-ref-format --branch @{-1}
+ ) &&
+ test "$refname" = "$sha1"
+'
+
valid_ref_normalized() {
test_expect_success "ref name '$1' simplifies to '$2'" "
refname=\$(git check-ref-format --print '$1') &&
git checkout master &&
git config --unset core.logAllRefUpdates &&
git checkout --orphan delta &&
- ! test -f .git/logs/refs/heads/delta &&
- test_must_fail PAGER= git reflog show delta &&
+ test_must_fail git rev-parse --verify delta@{0} &&
git commit -m Delta &&
- test -f .git/logs/refs/heads/delta &&
- PAGER= git reflog show delta
+ git rev-parse --verify delta@{0}
'
test_expect_success '--orphan does not make reflog when core.logAllRefUpdates = false' '
git checkout master &&
git config core.logAllRefUpdates false &&
git checkout --orphan epsilon &&
- ! test -f .git/logs/refs/heads/epsilon &&
- test_must_fail PAGER= git reflog show epsilon &&
+ test_must_fail git rev-parse --verify epsilon@{0} &&
git commit -m Epsilon &&
- ! test -f .git/logs/refs/heads/epsilon &&
- test_must_fail PAGER= git reflog show epsilon
+ test_must_fail git rev-parse --verify epsilon@{0}
'
test_expect_success '--orphan with -l makes reflog when core.logAllRefUpdates = false' '
git checkout master &&
git checkout -l --orphan zeta &&
- test -f .git/logs/refs/heads/zeta &&
- test_must_fail PAGER= git reflog show zeta &&
+ test_must_fail git rev-parse --verify zeta@{0} &&
git commit -m Zeta &&
- PAGER= git reflog show zeta
+ git rev-parse --verify zeta@{0}
'
test_expect_success 'giving up --orphan not committed when -l and core.logAllRefUpdates = false deletes reflog' '
git checkout master &&
git checkout -l --orphan eta &&
- test -f .git/logs/refs/heads/eta &&
- test_must_fail PAGER= git reflog show eta &&
+ test_must_fail git rev-parse --verify eta@{0} &&
git checkout master &&
- ! test -f .git/logs/refs/heads/eta &&
- test_must_fail PAGER= git reflog show eta
+ test_must_fail git rev-parse --verify eta@{0}
'
test_expect_success '--orphan is rejected with an existing name' '
git checkout master &&
git config --unset core.logAllRefUpdates &&
git checkout -b alpha &&
- test -f .git/logs/refs/heads/alpha &&
- PAGER= git reflog show alpha
+ git rev-parse --verify alpha@{0}
'
test_expect_success 'checkout -b does not make reflog when core.logAllRefUpdates = false' '
git checkout master &&
git config core.logAllRefUpdates false &&
git checkout -b beta &&
- ! test -f .git/logs/refs/heads/beta &&
- test_must_fail PAGER= git reflog show beta
+ test_must_fail git rev-parse --verify beta@{0}
'
test_expect_success 'checkout -b with -l makes reflog when core.logAllRefUpdates = false' '
git checkout master &&
git checkout -lb gamma &&
git config --unset core.logAllRefUpdates &&
- test -f .git/logs/refs/heads/gamma &&
- PAGER= git reflog show gamma
+ git rev-parse --verify gamma@{0}
'
test_expect_success 'avoid ambiguous track' '
! test -f .git/refs/heads/f
'
+test_expect_success 'see if git pack-refs --prune removes empty dirs' '
+ git branch r/s/t &&
+ git pack-refs --all --prune &&
+ ! test -e .git/refs/heads/r
+'
+
test_expect_success \
'git branch g should work when git branch g/h has been deleted' \
'git branch g/h &&
git add a10 &&
test_tick &&
git commit -m 10th &&
- test_must_fail MSG="yet another note" git notes add -c deadbeef &&
+ (
+ MSG="yet another note" &&
+ export MSG &&
+ test_must_fail git notes add -c deadbeef
+ ) &&
test_must_fail git notes list HEAD
'
git commit -a -m "end with slash\\" &&
echo >>file1 &&
test_tick &&
+ git commit -a -m "something (\000) that looks like octal" &&
+ echo >>file1 &&
+ test_tick &&
+ git commit -a -m "something (\n) that looks like a newline" &&
+ echo >>file1 &&
+ test_tick &&
git commit -a -m "another commit"
'
test_expect_success 'rebase-i history with funny messages' '
git rev-list A..funny >expect &&
test_tick &&
- FAKE_LINES="1 2" git rebase -i A &&
+ FAKE_LINES="1 2 3 4" git rebase -i A &&
git rev-list A.. >actual &&
test_cmp expect actual
'
--- /dev/null
+#!/bin/sh
+
+test_description='git rebase --continue tests'
+
+. ./test-lib.sh
+
+. "$TEST_DIRECTORY"/lib-rebase.sh
+
+set_fake_editor
+
+test_expect_success 'setup' '
+ test_commit "commit-new-file-F1" F1 1 &&
+ test_commit "commit-new-file-F2" F2 2 &&
+
+ git checkout -b topic HEAD^ &&
+ test_commit "commit-new-file-F2-on-topic-branch" F2 22 &&
+
+ git checkout master
+'
+
+test_expect_success 'interactive rebase --continue works with touched file' '
+ rm -fr .git/rebase-* &&
+ git reset --hard &&
+ git checkout master &&
+
+ FAKE_LINES="edit 1" git rebase -i HEAD^ &&
+ test-chmtime =-60 F1 &&
+ git rebase --continue
+'
+
+test_expect_success 'non-interactive rebase --continue works with touched file' '
+ rm -fr .git/rebase-* &&
+ git reset --hard &&
+ git checkout master &&
+
+ test_must_fail git rebase --onto master master topic &&
+ echo "Resolved" >F2 &&
+ git add F2 &&
+ test-chmtime =-60 F1 &&
+ git rebase --continue
+'
+
+test_done
! (git ls-files | grep "non-existent")
'
+test_expect_success 'git add --dry-run of existing changed file' "
+ echo new >>track-this &&
+ git add --dry-run track-this >actual 2>&1 &&
+ echo \"add 'track-this'\" | test_cmp - actual
+"
+
+test_expect_success 'git add --dry-run of non-existing file' "
+ echo ignored-file >>.gitignore &&
+ test_must_fail git add --dry-run track-this ignored-file >actual 2>&1 &&
+ echo \"fatal: pathspec 'ignored-file' did not match any files\" | test_cmp - actual
+"
+
+cat >expect.err <<\EOF
+The following paths are ignored by one of your .gitignore files:
+ignored-file
+Use -f if you really want to add them.
+fatal: no files added
+EOF
+cat >expect.out <<\EOF
+add 'track-this'
+EOF
+
+test_expect_success 'git add --dry-run --ignore-missing of non-existing file' '
+ test_must_fail git add --dry-run --ignore-missing track-this ignored-file >actual.out 2>actual.err &&
+ test_cmp expect.out actual.out &&
+ test_cmp expect.err actual.err
+'
+
test_done
--- /dev/null
+#!/bin/sh
+
+test_description='diff --relative tests'
+. ./test-lib.sh
+
+test_expect_success 'setup' '
+ git commit --allow-empty -m empty &&
+ echo content >file1 &&
+ mkdir subdir &&
+ echo other content >subdir/file2 &&
+ git add . &&
+ git commit -m one
+'
+
+check_diff() {
+expect=$1; shift
+cat >expected <<EOF
+diff --git a/$expect b/$expect
+new file mode 100644
+index 0000000..25c05ef
+--- /dev/null
++++ b/$expect
+@@ -0,0 +1 @@
++other content
+EOF
+test_expect_success "-p $*" "
+ git diff -p $* HEAD^ >actual &&
+ test_cmp expected actual
+"
+}
+
+check_stat() {
+expect=$1; shift
+cat >expected <<EOF
+ $expect | 1 +
+ 1 files changed, 1 insertions(+), 0 deletions(-)
+EOF
+test_expect_success "--stat $*" "
+ git diff --stat $* HEAD^ >actual &&
+ test_cmp expected actual
+"
+}
+
+check_raw() {
+expect=$1; shift
+cat >expected <<EOF
+:000000 100644 0000000000000000000000000000000000000000 25c05ef3639d2d270e7fe765a67668f098092bc5 A $expect
+EOF
+test_expect_success "--raw $*" "
+ git diff --no-abbrev --raw $* HEAD^ >actual &&
+ test_cmp expected actual
+"
+}
+
+for type in diff stat raw; do
+ check_$type file2 --relative=subdir/
+ check_$type file2 --relative=subdir
+ check_$type dir/file2 --relative=sub
+done
+
+test_done
grep "bad tree object" output.err
'
+test_expect_success 'upload-pack error message when bad ref requested' '
+
+ printf "0045want %s multi_ack_detailed\n00000009done\n0000" \
+ "deadbeefdeadbeefdeadbeefdeadbeefdeadbeef" >input &&
+ test_must_fail git upload-pack . <input >output 2>output.err &&
+ grep -q "not our ref" output.err &&
+ ! grep -q multi_ack_detailed output.err
+'
+
test_expect_success 'upload-pack fails due to error in pack-objects enumeration' '
printf "0032want %s\n00000009done\n0000" \
# push master too; this ensures there is at least one '"'push'"' command to
# the remote helper and triggers interaction with the helper.
- !(git push -v origin +master master:retsam >output 2>&1) &&
+ test_must_fail git push -v origin +master master:retsam >output 2>&1 &&
grep "^ + [a-f0-9]*\.\.\.[a-f0-9]* *master -> master (forced update)$" output &&
grep "^ ! \[rejected\] *master -> retsam (non-fast-forward)$" output &&
git bisect reset
'
+test_expect_success 'index-pack and replacements' '
+ git --no-replace-objects rev-list --objects HEAD |
+ git --no-replace-objects pack-objects test- &&
+ git index-pack test-*.pack
+'
+
#
#
test_done
test_expect_success 'use index-filter to move into a subdirectory' '
git branch directorymoved &&
git filter-branch -f --index-filter \
- "git ls-files -s | sed \"s-\\t-&newsubdir/-\" |
+ "git ls-files -s | sed \"s- -&newsubdir/-\" |
GIT_INDEX_FILE=\$GIT_INDEX_FILE.new \
git update-index --index-info &&
mv \"\$GIT_INDEX_FILE.new\" \"\$GIT_INDEX_FILE\"" directorymoved &&
- test -z "$(git diff HEAD directorymoved:newsubdir)"'
+ git diff --exit-code HEAD directorymoved:newsubdir
+'
test_expect_success 'stops when msg filter fails' '
old=$(git rev-parse HEAD) &&
test_cmp empty untracked
'
-test_expect_success 'submodule add to .gitignored path' '
- echo "refs/heads/master" >expect &&
- >empty &&
-
+test_expect_success 'submodule add to .gitignored path fails' '
(
cd addtest-ignore &&
+ cat <<-\EOF >expect &&
+ The following path is ignored by one of your .gitignore files:
+ submod
+ Use -f if you really want to add it.
+ EOF
# Does not use test_commit due to the ignore
echo "*" > .gitignore &&
git add --force .gitignore &&
git commit -m"Ignore everything" &&
- git submodule add "$submodurl" submod &&
- git submodule init
- ) &&
+ ! git submodule add "$submodurl" submod >actual 2>&1 &&
+ test_cmp expect actual
+ )
+'
- rm -f heads head untracked &&
- inspect addtest/submod ../.. &&
- test_cmp expect heads &&
- test_cmp expect head &&
- test_cmp empty untracked
+test_expect_success 'submodule add to .gitignored path with --force' '
+ (
+ cd addtest-ignore &&
+ git submodule add --force "$submodurl" submod
+ )
'
test_expect_success 'submodule add --branch' '
test -z \"\`git diff refs/heads/my-bar refs/remotes/bar\`\"
"
+test_expect_success 'dcommit should not fail with a touched file' '
+ test_commit "commit-new-file-foo2" foo2 &&
+ test-chmtime =-60 foo &&
+ git svn dcommit
+'
+
+test_expect_success 'rebase should not fail with a touched file' '
+ test-chmtime =-60 foo &&
+ git svn rebase
+'
+
test_expect_success 'able to set-tree to a subdirectory' "
echo cba > d &&
git update-index d &&
test `git rev-parse --verify master:file2` \
= `git rev-parse --verify verify--import-marks:copy-of-file2`'
+test_tick
+mt=$(git hash-object --stdin < /dev/null)
+: >input.blob
+: >marks.exp
+: >tree.exp
+
+cat >input.commit <<EOF
+commit refs/heads/verify--dump-marks
+committer $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> $GIT_COMMITTER_DATE
+data <<COMMIT
+test the sparse array dumping routines with exponentially growing marks
+COMMIT
+EOF
+
+i=0
+l=4
+m=6
+n=7
+while test "$i" -lt 27; do
+ cat >>input.blob <<EOF
+blob
+mark :$l
+data 0
+blob
+mark :$m
+data 0
+blob
+mark :$n
+data 0
+EOF
+ echo "M 100644 :$l l$i" >>input.commit
+ echo "M 100644 :$m m$i" >>input.commit
+ echo "M 100644 :$n n$i" >>input.commit
+
+ echo ":$l $mt" >>marks.exp
+ echo ":$m $mt" >>marks.exp
+ echo ":$n $mt" >>marks.exp
+
+ printf "100644 blob $mt\tl$i\n" >>tree.exp
+ printf "100644 blob $mt\tm$i\n" >>tree.exp
+ printf "100644 blob $mt\tn$i\n" >>tree.exp
+
+ l=$(($l + $l))
+ m=$(($m + $m))
+ n=$(($l + $n))
+
+ i=$((1 + $i))
+done
+
+sort tree.exp > tree.exp_s
+
+test_expect_success 'A: export marks with large values' '
+ cat input.blob input.commit | git fast-import --export-marks=marks.large &&
+ git ls-tree refs/heads/verify--dump-marks >tree.out &&
+ test_cmp tree.exp_s tree.out &&
+ test_cmp marks.exp marks.large'
+
###
### series B
###
-v|--v|--ve|--ver|--verb|--verbo|--verbos|--verbose)
verbose=t; shift ;;
-q|--q|--qu|--qui|--quie|--quiet)
- quiet=t; shift ;;
+ # Ignore --quiet under a TAP::Harness. Saying how many tests
+ # passed without the ok/not ok details is always an error.
+ test -z "$HARNESS_ACTIVE" && quiet=t; shift ;;
--with-dashes)
with_dashes=t; shift ;;
--no-color)
color=; shift ;;
- --no-python)
- # noop now...
- shift ;;
--va|--val|--valg|--valgr|--valgri|--valgrin|--valgrind)
valgrind=t; verbose=t; shift ;;
--tee)
GIT_EXIT_OK=t
test_results_dir="$TEST_DIRECTORY/test-results"
mkdir -p "$test_results_dir"
- test_results_path="$test_results_dir/${0%.sh}-$$"
+ test_results_path="$test_results_dir/${0%.sh}-$$.counts"
echo "total $test_count" >> $test_results_path
echo "success $test_success" >> $test_results_path
fprintf(pack_pipe, "-%s\n", sha1_to_hex(commit->object.sha1));
}
-static int do_rev_list(int in, int out, void *create_full_pack)
+static int do_rev_list(int in, int out, void *user_data)
{
int i;
struct rev_info revs;
if (use_thin_pack)
revs.edge_hint = 1;
- if (create_full_pack) {
- const char *args[] = {"rev-list", "--all", NULL};
- setup_revisions(2, args, &revs, NULL);
- } else {
- for (i = 0; i < want_obj.nr; i++) {
- struct object *o = want_obj.objects[i].item;
- /* why??? */
- o->flags &= ~UNINTERESTING;
- add_pending_object(&revs, o, NULL);
- }
- for (i = 0; i < have_obj.nr; i++) {
- struct object *o = have_obj.objects[i].item;
- o->flags |= UNINTERESTING;
- add_pending_object(&revs, o, NULL);
- }
- setup_revisions(0, NULL, &revs, NULL);
+ for (i = 0; i < want_obj.nr; i++) {
+ struct object *o = want_obj.objects[i].item;
+ /* why??? */
+ o->flags &= ~UNINTERESTING;
+ add_pending_object(&revs, o, NULL);
+ }
+ for (i = 0; i < have_obj.nr; i++) {
+ struct object *o = have_obj.objects[i].item;
+ o->flags |= UNINTERESTING;
+ add_pending_object(&revs, o, NULL);
}
+ setup_revisions(0, NULL, &revs, NULL);
if (prepare_revision_walk(&revs))
die("revision walk setup failed");
mark_edges_uninteresting(revs.commits, &revs, show_edge);
*/
o = lookup_object(sha1_buf);
if (!o || !(o->flags & OUR_REF))
- die("git upload-pack: not our ref %s", line+5);
+ die("git upload-pack: not our ref %s",
+ sha1_to_hex(sha1_buf));
if (!(o->flags & WANTED)) {
o->flags |= WANTED;
add_object_array(o, NULL, &want_obj);