--
core.fileMode::
- If false, the executable bit differences between the index and
- the working tree are ignored; useful on broken filesystems like FAT.
- See linkgit:git-update-index[1].
+ Tells Git if the executable bit of files in the working tree
+ is to be honored.
+
-The default is true, except linkgit:git-clone[1] or linkgit:git-init[1]
-will probe and set core.fileMode false if appropriate when the
-repository is created.
+Some filesystems lose the executable bit when a file that is
+marked as executable is checked out, or checks out an
+non-executable file with executable bit on.
+linkgit:git-clone[1] or linkgit:git-init[1] probe the filesystem
+to see if it handles the executable bit correctly
+and this variable is automatically set as necessary.
++
+A repository, however, may be on a filesystem that handles
+the filemode correctly, and this variable is set to 'true'
+when created, but later may be made accessible from another
+environment that loses the filemode (e.g. exporting ext4 via
+CIFS mount, visiting a Cygwin created repository with
+Git for Windows or Eclipse).
+In such a case it may be necessary to set this variable to 'false'.
+See linkgit:git-update-index[1].
++
+The default is true (when core.filemode is not specified in the config file).
core.ignorecase::
If true, this option enables various workarounds to enable
proxy use, while defaulting to a common proxy for external domains.
core.ignoreStat::
- If true, commands which modify both the working tree and the index
- will mark the updated paths with the "assume unchanged" bit in the
- index. These marked files are then assumed to stay unchanged in the
- working tree, until you mark them otherwise manually - Git will not
- detect the file changes by lstat() calls. This is useful on systems
- where those are very slow, such as Microsoft Windows.
- See linkgit:git-update-index[1].
- False by default.
+ If true, Git will avoid using lstat() calls to detect if files have
+ changed by setting the "assume-unchanged" bit for those tracked files
+ which it has updated identically in both the index and working tree.
++
+When files are modified outside of Git, the user will need to stage
+the modified files explicitly (e.g. see 'Examples' section in
+linkgit:git-update-index[1]).
+Git will not normally detect changes to those files.
++
+This is useful on systems where lstat() calls are very slow, such as
+CIFS/Microsoft Windows.
++
+False by default.
core.preferSymlinkRefs::
Instead of the default "symref" format for HEAD
Files larger than this size are stored deflated, without
attempting delta compression. Storing large files without
delta compression avoids excessive memory usage, at the
- slight expense of increased disk usage.
+ slight expense of increased disk usage. Additionally files
+ larger than this size are always treated as binary.
+
Default is 512 MiB on all platforms. This should be reasonable
for most projects as source code and other text files can still
for abbreviated object names to stay unique for sufficiently long
time.
- add.ignore-errors::
add.ignoreErrors::
+ add.ignore-errors (deprecated)::
Tells 'git add' to continue adding files when some files cannot be
added due to indexing errors. Equivalent to the '--ignore-errors'
- option of linkgit:git-add[1]. Older versions of Git accept only
- `add.ignore-errors`, which does not follow the usual naming
- convention for configuration variables. Newer versions of Git
- honor `add.ignoreErrors` as well.
+ option of linkgit:git-add[1]. `add.ignore-errors` is deprecated,
+ as it does not follow the usual naming convention for configuration
+ variables.
alias.*::
Command aliases for the linkgit:git[1] command wrapper - e.g.
`magenta`, `cyan` and `white`; the attributes are `bold`, `dim`, `ul`,
`blink` and `reverse`. The first color given is the foreground; the
second is the background. The position of the attribute, if any,
-doesn't matter.
+doesn't matter. Attributes may be turned off specifically by prefixing
+them with `no` (e.g., `noreverse`, `noul`, etc).
++
+Colors (foreground and background) may also be given as numbers between
+0 and 255; these use ANSI 256-color mode (but note that not all
+terminals may support this). If your terminal supports it, you may also
+specify 24-bit RGB values as hex, like `#ff0ab3`.
color.diff::
Whether to use ANSI escape sequences to add color to patches.
`linenumber`;;
line number prefix (when using `-n`)
`match`;;
- matching text
+ matching text (same as setting `matchContext` and `matchSelected`)
+`matchContext`;;
+ matching text in context lines
+`matchSelected`;;
+ matching text in selected lines
`selected`;;
non-matching text in selected lines
`separator`;;
default value is 50. Setting this to 0 disables it.
gc.autodetach::
- Make `git gc --auto` return immediately andrun in background
+ Make `git gc --auto` return immediately and run in background
if the system supports it. Default is true.
gc.packrefs::
same command-line interface as GPG, namely, to verify a detached
signature, "gpg --verify $file - <$signature" is run, and the
program is expected to signal a good signature by exiting with
- code 0, and to generate an ascii-armored detached signature, the
+ code 0, and to generate an ASCII-armored detached signature, the
standard input of "gpg -bsau $key" is fed with the contents to be
signed, and the program is expected to send the result to its
standard output.
Can be overridden by the 'GIT_HTTP_USER_AGENT' environment variable.
http.<url>.*::
- Any of the http.* options above can be applied selectively to some urls.
+ Any of the http.* options above can be applied selectively to some URLs.
For a config key to match a URL, each element of the config key is
compared to that of the URL, in the following order:
+
+
All URLs are normalized before attempting any matching (the password part,
if embedded in the URL, is always ignored for matching purposes) so that
-equivalent urls that are simply spelled differently will match properly.
-Environment variable settings always override any matches. The urls that are
+equivalent URLs that are simply spelled differently will match properly.
+Environment variable settings always override any matches. The URLs that are
matched against are those given directly to Git commands. This means any URLs
visited as a result of a redirection do not participate in matching.
preserved, otherwise they will be removed after the tool has
exited. Defaults to `false`.
+mergetool.writeToTemp::
+ Git writes temporary 'BASE', 'LOCAL', and 'REMOTE' versions of
+ conflicting files in the worktree by default. Git will attempt
+ to use a temporary directory for these files when set `true`.
+ Defaults to `false`.
+
mergetool.prompt::
Prompt before each invocation of the merge resolution program.
maximum depth is given on the command line. Defaults to 50.
pack.windowMemory::
- The window memory size limit used by linkgit:git-pack-objects[1]
- when no limit is given on the command line. The value can be
- suffixed with "k", "m", or "g". Defaults to 0, meaning no
- limit.
+ The maximum size of memory that is consumed by each thread
+ in linkgit:git-pack-objects[1] for pack window memory when
+ no limit is given on the command line. The value can be
+ suffixed with "k", "m", or "g". When left unconfigured (or
+ set explicitly to 0), there will be no limit.
pack.compression::
An integer -1..9, indicating the compression level for objects
true. You should not generally need to turn this off unless
you are debugging pack bitmaps.
- pack.writebitmaps::
+ pack.writebitmaps (deprecated)::
This is a deprecated synonym for `repack.writeBitmaps`.
pack.writeBitmapHashCache::
receiving data from git-push and updating refs. You can stop
it by setting this variable to false.
+receive.certnonceseed::
+ By setting this variable to a string, `git receive-pack`
+ will accept a `git push --signed` and verifies it by using
+ a "nonce" protected by HMAC using this string as a secret
+ key.
+
+receive.certnonceslop::
+ When a `git push --signed` sent a push certificate with a
+ "nonce" that was issued by a receive-pack serving the same
+ repository within this many seconds, export the "nonce"
+ found in the certificate to `GIT_PUSH_CERT_NONCE` to the
+ hooks (instead of what the receive-pack asked the sending
+ side to include). This may allow writing checks in
+ `pre-receive` and `post-receive` a bit easier. Instead of
+ checking `GIT_PUSH_CERT_NONCE_SLOP` environment variable
+ that records by how many seconds the nonce is stale to
+ decide if they want to accept the certificate, they only
+ can check `GIT_PUSH_CERT_NONCE_STATUS` is `OK`.
+
receive.fsckObjects::
If it is set to true, git-receive-pack will check all received
objects. It will abort in the case of a malformed object or a
print a warning of such a push to stderr, but allow the push to
proceed. If set to false or "ignore", allow such pushes with no
message. Defaults to "refuse".
++
+Another option is "updateInstead" which will update the working
+directory (must be clean) if pushing into the current branch. This option is
+intended for synchronizing working directories when one side is not easily
+accessible via interactive ssh (e.g. a live web site, hence the requirement
+that the working directory be clean). This mode also comes in handy when
+developing inside a VM to test and fix code on different Operating Systems.
receive.denyNonFastForwards::
If set to true, git-receive-pack will deny a ref update which is
See linkgit:git-send-email[1] for description. Note that this
setting is not subject to the 'identity' mechanism.
- sendemail.smtpssl::
+ sendemail.smtpssl (deprecated)::
Deprecated alias for 'sendemail.smtpencryption = ssl'.
sendemail.smtpsslcertpath::
sendemail.smtpserveroption::
sendemail.smtpuser::
sendemail.thread::
+sendemail.transferencoding::
sendemail.validate::
+sendemail.xmailer::
See linkgit:git-send-email[1] for description.
- sendemail.signedoffcc::
+ sendemail.signedoffcc (deprecated)::
Deprecated alias for 'sendemail.signedoffbycc'.
showbranch.default::