sub run_git_apply {
my $cmd = shift;
my $fh;
- open $fh, '| git ' . $cmd . " --recount --allow-overlap";
+ open $fh, '| git ' . $cmd . " --allow-overlap";
print $fh @_;
return close $fh;
}
}
my (@hunk) = { TEXT => [], DISPLAY => [], TYPE => 'header' };
+ if (@colored && @colored != @diff) {
+ print STDERR
+ "fatal: mismatched output from interactive.diffFilter\n",
+ "hint: Your filter must maintain a one-to-one correspondence\n",
+ "hint: between its input and output lines.\n";
+ exit 1;
+ }
+
for (my $i = 0; $i < @diff; $i++) {
if ($diff[$i] =~ /^@@ /) {
push @hunk, { TEXT => [], DISPLAY => [],
return ($o_ofs, $o_cnt, $n_ofs, $n_cnt);
}
+sub format_hunk_header {
+ my ($o_ofs, $o_cnt, $n_ofs, $n_cnt) = @_;
+ return ("@@ -$o_ofs" .
+ (($o_cnt != 1) ? ",$o_cnt" : '') .
+ " +$n_ofs" .
+ (($n_cnt != 1) ? ",$n_cnt" : '') .
+ " @@\n");
+}
+
sub split_hunk {
my ($text, $display) = @_;
my @split = ();
while (++$i < @$text) {
my $line = $text->[$i];
my $display = $display->[$i];
+ if ($line =~ /^\\/) {
+ push @{$this->{TEXT}}, $line;
+ push @{$this->{DISPLAY}}, $display;
+ next;
+ }
if ($line =~ /^ /) {
if ($this->{ADDDEL} &&
!defined $next_hunk_start) {
my $o_cnt = $hunk->{OCNT};
my $n_cnt = $hunk->{NCNT};
- my $head = ("@@ -$o_ofs" .
- (($o_cnt != 1) ? ",$o_cnt" : '') .
- " +$n_ofs" .
- (($n_cnt != 1) ? ",$n_cnt" : '') .
- " @@\n");
+ my $head = format_hunk_header($o_ofs, $o_cnt, $n_ofs, $n_cnt);
my $display_head = $head;
unshift @{$hunk->{TEXT}}, $head;
if ($diff_use_color) {
$n_cnt++;
push @line, $line;
next;
+ } elsif ($line =~ /^\\/) {
+ push @line, $line;
+ next;
}
last if ($o1_ofs <= $ofs);
$n_cnt++;
push @line, $line;
next;
+ } elsif ($line =~ /^\\/) {
+ push @line, $line;
+ next;
}
$ofs++;
$o_cnt++;
}
push @line, $line;
}
- my $head = ("@@ -$o0_ofs" .
- (($o_cnt != 1) ? ",$o_cnt" : '') .
- " +$n0_ofs" .
- (($n_cnt != 1) ? ",$n_cnt" : '') .
- " @@\n");
+ my $head = format_hunk_header($o0_ofs, $o_cnt, $n0_ofs, $n_cnt);
@{$prev->{TEXT}} = ($head, @line);
}
my @out = ();
my ($last_o_ctx, $last_was_dirty);
+ my $ofs_delta = 0;
- for (grep { $_->{USE} } @in) {
+ for (@in) {
if ($_->{TYPE} ne 'hunk') {
push @out, $_;
next;
}
my $text = $_->{TEXT};
- my ($o_ofs) = parse_hunk_header($text->[0]);
+ my ($o_ofs, $o_cnt, $n_ofs, $n_cnt) =
+ parse_hunk_header($text->[0]);
+ unless ($_->{USE}) {
+ $ofs_delta += $o_cnt - $n_cnt;
+ # If this hunk has been edited then subtract
+ # the delta that is due to the edit.
+ if ($_->{OFS_DELTA}) {
+ $ofs_delta -= $_->{OFS_DELTA};
+ }
+ next;
+ }
+ if ($ofs_delta) {
+ $n_ofs += $ofs_delta;
+ $_->{TEXT}->[0] = format_hunk_header($o_ofs, $o_cnt,
+ $n_ofs, $n_cnt);
+ }
+ # If this hunk was edited then adjust the offset delta
+ # to reflect the edit.
+ if ($_->{OFS_DELTA}) {
+ $ofs_delta += $_->{OFS_DELTA};
+ }
if (defined $last_o_ctx &&
$o_ofs <= $last_o_ctx &&
!$_->{DIRTY} &&
marked for applying."),
);
+sub recount_edited_hunk {
+ local $_;
+ my ($oldtext, $newtext) = @_;
+ my ($o_cnt, $n_cnt) = (0, 0);
+ for (@{$newtext}[1..$#{$newtext}]) {
+ my $mode = substr($_, 0, 1);
+ if ($mode eq '-') {
+ $o_cnt++;
+ } elsif ($mode eq '+') {
+ $n_cnt++;
+ } elsif ($mode eq ' ') {
+ $o_cnt++;
+ $n_cnt++;
+ }
+ }
+ my ($o_ofs, undef, $n_ofs, undef) =
+ parse_hunk_header($newtext->[0]);
+ $newtext->[0] = format_hunk_header($o_ofs, $o_cnt, $n_ofs, $n_cnt);
+ my (undef, $orig_o_cnt, undef, $orig_n_cnt) =
+ parse_hunk_header($oldtext->[0]);
+ # Return the change in the number of lines inserted by this hunk
+ return $orig_o_cnt - $orig_n_cnt - $o_cnt + $n_cnt;
+}
+
sub edit_hunk_manually {
my ($oldtext) = @_;
}
sub edit_hunk_loop {
- my ($head, $hunk, $ix) = @_;
- my $text = $hunk->[$ix]->{TEXT};
+ my ($head, $hunks, $ix) = @_;
+ my $hunk = $hunks->[$ix];
+ my $text = $hunk->{TEXT};
while (1) {
- $text = edit_hunk_manually($text);
- if (!defined $text) {
+ my $newtext = edit_hunk_manually($text);
+ if (!defined $newtext) {
return undef;
}
my $newhunk = {
- TEXT => $text,
- TYPE => $hunk->[$ix]->{TYPE},
+ TEXT => $newtext,
+ TYPE => $hunk->{TYPE},
USE => 1,
DIRTY => 1,
};
+ $newhunk->{OFS_DELTA} = recount_edited_hunk($text, $newtext);
+ # If this hunk has already been edited then add the
+ # offset delta of the previous edit to get the real
+ # delta from the original unedited hunk.
+ $hunk->{OFS_DELTA} and
+ $newhunk->{OFS_DELTA} += $hunk->{OFS_DELTA};
if (diff_applies($head,
- @{$hunk}[0..$ix-1],
+ @{$hunks}[0..$ix-1],
$newhunk,
- @{$hunk}[$ix+1..$#{$hunk}])) {
- $newhunk->{DISPLAY} = [color_diff(@{$text})];
+ @{$hunks}[$ix+1..$#{$hunks}])) {
+ $newhunk->{DISPLAY} = [color_diff(@{$newtext})];
return $newhunk;
}
else {
);
sub help_patch_cmd {
- print colored $help_color, __($help_patch_modes{$patch_mode}), "\n", __ <<EOF ;
+ local $_;
+ my $other = $_[0] . ",?";
+ print colored $help_color, __($help_patch_modes{$patch_mode}), "\n",
+ map { "$_\n" } grep {
+ my $c = quotemeta(substr($_, 0, 1));
+ $other =~ /,$c/
+ } split "\n", __ <<EOF ;
g - select a hunk to go to
/ - search for a hunk matching the given regex
j - leave this hunk undecided, see next undecided hunk
my %patch_update_prompt_modes = (
stage => {
- mode => N__("Stage mode change [y,n,q,a,d,/%s,?]? "),
- deletion => N__("Stage deletion [y,n,q,a,d,/%s,?]? "),
- hunk => N__("Stage this hunk [y,n,q,a,d,/%s,?]? "),
+ mode => N__("Stage mode change [y,n,q,a,d%s,?]? "),
+ deletion => N__("Stage deletion [y,n,q,a,d%s,?]? "),
+ hunk => N__("Stage this hunk [y,n,q,a,d%s,?]? "),
},
stash => {
- mode => N__("Stash mode change [y,n,q,a,d,/%s,?]? "),
- deletion => N__("Stash deletion [y,n,q,a,d,/%s,?]? "),
- hunk => N__("Stash this hunk [y,n,q,a,d,/%s,?]? "),
+ mode => N__("Stash mode change [y,n,q,a,d%s,?]? "),
+ deletion => N__("Stash deletion [y,n,q,a,d%s,?]? "),
+ hunk => N__("Stash this hunk [y,n,q,a,d%s,?]? "),
},
reset_head => {
- mode => N__("Unstage mode change [y,n,q,a,d,/%s,?]? "),
- deletion => N__("Unstage deletion [y,n,q,a,d,/%s,?]? "),
- hunk => N__("Unstage this hunk [y,n,q,a,d,/%s,?]? "),
+ mode => N__("Unstage mode change [y,n,q,a,d%s,?]? "),
+ deletion => N__("Unstage deletion [y,n,q,a,d%s,?]? "),
+ hunk => N__("Unstage this hunk [y,n,q,a,d%s,?]? "),
},
reset_nothead => {
- mode => N__("Apply mode change to index [y,n,q,a,d,/%s,?]? "),
- deletion => N__("Apply deletion to index [y,n,q,a,d,/%s,?]? "),
- hunk => N__("Apply this hunk to index [y,n,q,a,d,/%s,?]? "),
+ mode => N__("Apply mode change to index [y,n,q,a,d%s,?]? "),
+ deletion => N__("Apply deletion to index [y,n,q,a,d%s,?]? "),
+ hunk => N__("Apply this hunk to index [y,n,q,a,d%s,?]? "),
},
checkout_index => {
- mode => N__("Discard mode change from worktree [y,n,q,a,d,/%s,?]? "),
- deletion => N__("Discard deletion from worktree [y,n,q,a,d,/%s,?]? "),
- hunk => N__("Discard this hunk from worktree [y,n,q,a,d,/%s,?]? "),
+ mode => N__("Discard mode change from worktree [y,n,q,a,d%s,?]? "),
+ deletion => N__("Discard deletion from worktree [y,n,q,a,d%s,?]? "),
+ hunk => N__("Discard this hunk from worktree [y,n,q,a,d%s,?]? "),
},
checkout_head => {
- mode => N__("Discard mode change from index and worktree [y,n,q,a,d,/%s,?]? "),
- deletion => N__("Discard deletion from index and worktree [y,n,q,a,d,/%s,?]? "),
- hunk => N__("Discard this hunk from index and worktree [y,n,q,a,d,/%s,?]? "),
+ mode => N__("Discard mode change from index and worktree [y,n,q,a,d%s,?]? "),
+ deletion => N__("Discard deletion from index and worktree [y,n,q,a,d%s,?]? "),
+ hunk => N__("Discard this hunk from index and worktree [y,n,q,a,d%s,?]? "),
},
checkout_nothead => {
- mode => N__("Apply mode change to index and worktree [y,n,q,a,d,/%s,?]? "),
- deletion => N__("Apply deletion to index and worktree [y,n,q,a,d,/%s,?]? "),
- hunk => N__("Apply this hunk to index and worktree [y,n,q,a,d,/%s,?]? "),
+ mode => N__("Apply mode change to index and worktree [y,n,q,a,d%s,?]? "),
+ deletion => N__("Apply deletion to index and worktree [y,n,q,a,d%s,?]? "),
+ hunk => N__("Apply this hunk to index and worktree [y,n,q,a,d%s,?]? "),
},
);
$other .= ',J';
}
if ($num > 1) {
- $other .= ',g';
+ $other .= ',g,/';
}
for ($i = 0; $i < $num; $i++) {
if (!defined $hunk[$i]{USE}) {
}
next;
}
- elsif ($other =~ /g/ && $line =~ /^g(.*)/) {
+ elsif ($line =~ /^g(.*)/) {
my $response = $1;
+ unless ($other =~ /g/) {
+ error_msg __("No other hunks to goto\n");
+ next;
+ }
my $no = $ix > 10 ? $ix - 10 : 0;
while ($response eq '') {
$no = display_hunks(\@hunk, $no);
}
elsif ($line =~ m|^/(.*)|) {
my $regex = $1;
+ unless ($other =~ m|/|) {
+ error_msg __("No other hunks to search\n");
+ next;
+ }
if ($1 eq "") {
print colored $prompt_color, __("search for regex? ");
$regex = <STDIN>;
next;
}
}
- elsif ($other =~ /s/ && $line =~ /^s/) {
+ elsif ($line =~ /^s/) {
+ unless ($other =~ /s/) {
+ error_msg __("Sorry, cannot split this hunk\n");
+ next;
+ }
my @split = split_hunk($hunk[$ix]{TEXT}, $hunk[$ix]{DISPLAY});
if (1 < @split) {
print colored $header_color, sprintf(
$num = scalar @hunk;
next;
}
- elsif ($other =~ /e/ && $line =~ /^e/) {
+ elsif ($line =~ /^e/) {
+ unless ($other =~ /e/) {
+ error_msg __("Sorry, cannot edit this hunk\n");
+ next;
+ }
my $newhunk = edit_hunk_loop($head, \@hunk, $ix);
if (defined $newhunk) {
splice @hunk, $ix, 1, $newhunk;
test_done
fi
+diff_cmp () {
+ for x
+ do
+ sed -e '/^index/s/[0-9a-f]*[1-9a-f][0-9a-f]*\.\./1234567../' \
+ -e '/^index/s/\.\.[0-9a-f]*[1-9a-f][0-9a-f]*/..9abcdef/' \
+ -e '/^index/s/ 00*\.\./ 0000000../' \
+ -e '/^index/s/\.\.00*$/..0000000/' \
+ -e '/^index/s/\.\.00* /..0000000 /' \
+ "$x" >"$x.filtered"
+ done
+ test_cmp "$1.filtered" "$2.filtered"
+}
+
test_expect_success 'setup (initial)' '
echo content >file &&
git add file &&
'
test_expect_success 'setup expected' '
-cat >expected <<EOF
-new file mode 100644
-index 0000000..d95f3ad
---- /dev/null
-+++ b/file
-@@ -0,0 +1 @@
-+content
-EOF
+ cat >expected <<-\EOF
+ new file mode 100644
+ index 0000000..d95f3ad
+ --- /dev/null
+ +++ b/file
+ @@ -0,0 +1 @@
+ +content
+ EOF
'
test_expect_success 'diff works (initial)' '
(echo d; echo 1) | git add -i >output &&
sed -ne "/new file/,/content/p" <output >diff &&
- test_cmp expected diff
+ diff_cmp expected diff
'
test_expect_success 'revert works (initial)' '
git add file &&
'
test_expect_success 'setup expected' '
-cat >expected <<EOF
-index 180b47c..b6f2c08 100644
---- a/file
-+++ b/file
-@@ -1 +1,2 @@
- baseline
-+content
-EOF
+ cat >expected <<-\EOF
+ index 180b47c..b6f2c08 100644
+ --- a/file
+ +++ b/file
+ @@ -1 +1,2 @@
+ baseline
+ +content
+ EOF
'
test_expect_success 'diff works (commit)' '
(echo d; echo 1) | git add -i >output &&
sed -ne "/^index/,/content/p" <output >diff &&
- test_cmp expected diff
+ diff_cmp expected diff
'
test_expect_success 'revert works (commit)' '
git add file &&
test_expect_success 'setup expected' '
-cat >expected <<EOF
-EOF
-'
-
-test_expect_success 'setup fake editor' '
- >fake_editor.sh &&
- chmod a+x fake_editor.sh &&
- test_set_editor "$(pwd)/fake_editor.sh"
+ cat >expected <<-\EOF
+ EOF
'
test_expect_success 'dummy edit works' '
+ test_set_editor : &&
(echo e; echo a) | git add -p &&
git diff > diff &&
- test_cmp expected diff
+ diff_cmp expected diff
'
test_expect_success 'setup patch' '
-cat >patch <<EOF
-@@ -1,1 +1,4 @@
- this
-+patch
--does not
- apply
-EOF
+ cat >patch <<-\EOF
+ @@ -1,1 +1,4 @@
+ this
+ +patch
+ -does not
+ apply
+ EOF
'
test_expect_success 'setup fake editor' '
- echo "#!$SHELL_PATH" >fake_editor.sh &&
- cat >>fake_editor.sh <<\EOF &&
-mv -f "$1" oldpatch &&
-mv -f patch "$1"
-EOF
- chmod a+x fake_editor.sh &&
+ write_script "fake_editor.sh" <<-\EOF &&
+ mv -f "$1" oldpatch &&
+ mv -f patch "$1"
+ EOF
test_set_editor "$(pwd)/fake_editor.sh"
'
'
test_expect_success 'setup patch' '
-cat >patch <<EOF
-this patch
-is garbage
-EOF
+ cat >patch <<-\EOF
+ this patch
+ is garbage
+ EOF
'
test_expect_success 'garbage edit rejected' '
'
test_expect_success 'setup patch' '
-cat >patch <<EOF
-@@ -1,0 +1,0 @@
- baseline
-+content
-+newcontent
-+lines
-EOF
+ cat >patch <<-\EOF
+ @@ -1,0 +1,0 @@
+ baseline
+ +content
+ +newcontent
+ +lines
+ EOF
'
test_expect_success 'setup expected' '
-cat >expected <<EOF
-diff --git a/file b/file
-index b5dd6c9..f910ae9 100644
---- a/file
-+++ b/file
-@@ -1,4 +1,4 @@
- baseline
- content
--newcontent
-+more
- lines
-EOF
+ cat >expected <<-\EOF
+ diff --git a/file b/file
+ index b5dd6c9..f910ae9 100644
+ --- a/file
+ +++ b/file
+ @@ -1,4 +1,4 @@
+ baseline
+ content
+ -newcontent
+ +more
+ lines
+ EOF
'
test_expect_success 'real edit works' '
(echo e; echo n; echo d) | git add -p &&
git diff >output &&
- test_cmp expected output
+ diff_cmp expected output
'
test_expect_success 'skip files similarly as commit -a' '
git reset &&
git commit -am commit &&
git diff >expected &&
- test_cmp expected output &&
+ diff_cmp expected output &&
git reset --hard HEAD^
'
rm -f .gitignore
# Write the patch file with a new line at the top and bottom
test_expect_success 'setup patch' '
-cat >patch <<EOF
-index 180b47c..b6f2c08 100644
---- a/file
-+++ b/file
-@@ -1,2 +1,4 @@
-+firstline
- baseline
- content
-+lastline
-EOF
-'
-
-# Expected output, similar to the patch but w/ diff at the top
+ cat >patch <<-\EOF
+ index 180b47c..b6f2c08 100644
+ --- a/file
+ +++ b/file
+ @@ -1,2 +1,4 @@
+ +firstline
+ baseline
+ content
+ +lastline
+ \ No newline at end of file
+ EOF
+'
+
+# Expected output, diff is similar to the patch but w/ diff at the top
test_expect_success 'setup expected' '
-cat >expected <<EOF
-diff --git a/file b/file
-index b6f2c08..61b9053 100755
---- a/file
-+++ b/file
-@@ -1,2 +1,4 @@
-+firstline
- baseline
- content
-+lastline
-EOF
+ echo diff --git a/file b/file >expected &&
+ cat patch |sed "/^index/s/ 100644/ 100755/" >>expected &&
+ cat >expected-output <<-\EOF
+ --- a/file
+ +++ b/file
+ @@ -1,2 +1,4 @@
+ +firstline
+ baseline
+ content
+ +lastline
+ \ No newline at end of file
+ @@ -1,2 +1,3 @@
+ +firstline
+ baseline
+ content
+ @@ -1,2 +2,3 @@
+ baseline
+ content
+ +lastline
+ \ No newline at end of file
+ EOF
'
# Test splitting the first patch, then adding both
-test_expect_success 'add first line works' '
+test_expect_success C_LOCALE_OUTPUT 'add first line works' '
git commit -am "clear local changes" &&
git apply patch &&
- (echo s; echo y; echo y) | git add -p file &&
- git diff --cached > diff &&
- test_cmp expected diff
+ printf "%s\n" s y y | git add -p file 2>error |
+ sed -n -e "s/^Stage this hunk[^@]*\(@@ .*\)/\1/" \
+ -e "/^[-+@ \\\\]"/p >output &&
+ test_must_be_empty error &&
+ git diff --cached >diff &&
+ diff_cmp expected diff &&
+ test_cmp expected-output output
'
test_expect_success 'setup expected' '
-cat >expected <<EOF
-diff --git a/non-empty b/non-empty
-deleted file mode 100644
-index d95f3ad..0000000
---- a/non-empty
-+++ /dev/null
-@@ -1 +0,0 @@
--content
-EOF
+ cat >expected <<-\EOF
+ diff --git a/non-empty b/non-empty
+ deleted file mode 100644
+ index d95f3ad..0000000
+ --- a/non-empty
+ +++ /dev/null
+ @@ -1 +0,0 @@
+ -content
+ EOF
'
test_expect_success 'deleting a non-empty file' '
rm non-empty &&
echo y | git add -p non-empty &&
git diff --cached >diff &&
- test_cmp expected diff
+ diff_cmp expected diff
'
test_expect_success 'setup expected' '
-cat >expected <<EOF
-diff --git a/empty b/empty
-deleted file mode 100644
-index e69de29..0000000
-EOF
+ cat >expected <<-\EOF
+ diff --git a/empty b/empty
+ deleted file mode 100644
+ index e69de29..0000000
+ EOF
'
test_expect_success 'deleting an empty file' '
rm empty &&
echo y | git add -p empty &&
git diff --cached >diff &&
- test_cmp expected diff
+ diff_cmp expected diff
'
test_expect_success 'split hunk setup' '
git reset --hard &&
- for i in 10 20 30 40 50 60
- do
- echo $i
- done >test &&
+ test_write_lines 10 20 30 40 50 60 >test &&
git add test &&
test_tick &&
git commit -m test &&
- for i in 10 15 20 21 22 23 24 30 40 50 60
- do
- echo $i
- done >test
+ test_write_lines 10 15 20 21 22 23 24 30 40 50 60 >test
'
test_expect_success 'split hunk "add -p (edit)"' '
'
test_expect_failure 'split hunk "add -p (no, yes, edit)"' '
- cat >test <<-\EOF &&
- 5
- 10
- 20
- 21
- 30
- 31
- 40
- 50
- 60
- EOF
+ test_write_lines 5 10 20 21 30 31 40 50 60 >test &&
git reset &&
# test sequence is s(plit), n(o), y(es), e(dit)
# q n q q is there to make sure we exit at the end.
+changed
EOF
git diff --cached >diff &&
- test_cmp expected diff
+ diff_cmp expected diff
'
test_expect_success TTY 'diffs can be colorized' '
grep "$(printf "\\033")" output
'
+ test_expect_success TTY 'diffFilter filters diff' '
+ git reset --hard &&
+
+ echo content >test &&
+ test_config interactive.diffFilter "sed s/^/foo:/" &&
+ printf y | test_terminal git add -p >output 2>&1 &&
+
+ # avoid depending on the exact coloring or content of the prompts,
+ # and just make sure we saw our diff prefixed
+ grep foo:.*content output
+ '
+
+ test_expect_success TTY 'detect bogus diffFilter output' '
+ git reset --hard &&
+
+ echo content >test &&
+ test_config interactive.diffFilter "echo too-short" &&
+ printf y | test_must_fail test_terminal git add -p
+ '
+
test_expect_success 'patch-mode via -i prompts for files' '
git reset --hard &&
echo test >expect &&
git diff --cached --name-only >actual &&
- test_cmp expect actual
+ diff_cmp expect actual
'
test_expect_success 'add -p handles globs' '
! grep dirty-otherwise output
'
+test_expect_success 'set up pathological context' '
+ git reset --hard &&
+ test_write_lines a a a a a a a a a a a >a &&
+ git add a &&
+ git commit -m a &&
+ test_write_lines c b a a a a a a a b a a a a >a &&
+ test_write_lines a a a a a a a b a a a a >expected-1 &&
+ test_write_lines b a a a a a a a b a a a a >expected-2 &&
+ # check editing can cope with missing header and deleted context lines
+ # as well as changes to other lines
+ test_write_lines +b " a" >patch
+'
+
+test_expect_success 'add -p works with pathological context lines' '
+ git reset &&
+ printf "%s\n" n y |
+ git add -p &&
+ git cat-file blob :a >actual &&
+ test_cmp expected-1 actual
+'
+
+test_expect_success 'add -p patch editing works with pathological context lines' '
+ git reset &&
+ # n q q below is in case edit fails
+ printf "%s\n" e y n q q |
+ git add -p &&
+ git cat-file blob :a >actual &&
+ test_cmp expected-2 actual
+'
+
test_done