The fixes focuses on improving the HTML output. Most noteworthy:
- Fix the Makefile to also make various *.html files depend on
included files.
- Consistently use 'NOTE: ...' instead of '[ ... ]' for additional
info.
- Fix ending '::' for description lists in OPTION section etc.
- Fix paragraphs in description lists ending up as preformated text.
- Always use listingblocks (preformatted text wrapped in lines with -----)
for examples that span empty lines, so they are put in only one HTML
block.
- Use '1.' instead of '(1)' for numbered lists.
- Fix linking to other GIT docs.
- git-rev-list.txt: put option descriptions in an OPTION section.
Signed-off-by: Jonas Fonseca <fonseca@diku.dk>
Signed-off-by: Junio C Hamano <junkio@cox.net>
$(patsubst %.txt,%.1,$(wildcard git-diff-*.txt)): \
diff-format.txt diff-options.txt
$(patsubst %,%.1,git-fetch git-pull git-push): pull-fetch-param.txt
+$(patsubst %.txt,%.html,$(wildcard git-diff-*.txt)): \
+ diff-format.txt diff-options.txt
+$(patsubst %,%.html,git-fetch git-pull git-push): pull-fetch-param.txt
git.7: ../README
clean:
"o-file.c", it would find the commit that changed the statement
when it was in "o-file.c".
-[ BTW, the current versions of "git-diff-tree -C" is not eager
+NOTE: The current versions of "git-diff-tree -C" is not eager
enough to find copies, and it will miss the fact that a-file.c
was created by copying o-file.c unless o-file.c was somehow
- changed in the same commit.]
+ changed in the same commit.
You can use the --pickaxe-all flag in addition to the -S flag.
This causes the differences from all the files contained in
nitfol();
}' --pickaxe-all
-[ Side note. This option is called "--pickaxe-all" because -S
+NOTE: This option is called "--pickaxe-all" because -S
option is internally called "pickaxe", a tool for software
- archaeologists.]
+ archaeologists.
would look like this:
------------------------------------------------
- README
- Makefile
- Documentation
- *.h
- *.c
- t
+README
+Makefile
+Documentation
+*.h
+*.c
+t
------------------------------------------------
<patch>::
The patch to apply.
-<info>:
+<info>::
Author and subject information extracted from e-mail,
used on "author" line and as the first line of the
commit log message.
Written by Linus Torvalds <torvalds@osdl.org>
Documentation
---------------
+-------------
Documentation by Junio C Hamano and the git-list <git@vger.kernel.org>.
GIT
option is used, your working tree does not have to match
the HEAD commit. The cherry-pick is done against the
beginning state of your working tree.
-
- This is useful when cherry-picking more than one commits'
- effect to your working tree in a row.
++
+This is useful when cherry-picking more than one commits'
+effect to your working tree in a row.
Author
GIT_COMMITTER_NAME
GIT_COMMITTER_EMAIL
-(nb <,> and '\n's are stripped)
+(nb "<", ">" and "\n"s are stripped)
A commit comment is read from stdin (max 999 chars). If a changelog
-entry is not provided via '<' redirection, "git-commit-tree" will just wait
-for one to be entered and terminated with ^D
+entry is not provided via "<" redirection, "git-commit-tree" will just wait
+for one to be entered and terminated with ^D.
Diagnostics
-----------
The 'HEAD' branch from CVS is imported to the 'origin' branch within
the git repository, as 'HEAD' already has a special meaning for git.
Use this option if you want to import into a different branch.
-
- Use '-o master' for continuing an import that was initially done by
- the old cvs2git tool.
++
+Use '-o master' for continuing an import that was initially done by
+the old cvs2git tool.
-p <options-for-cvsps>::
Additional options for cvsps.
The options '-u' and '-A' are implicit and should not be used here.
-
- If you need to pass multiple options, separate them with a comma.
++
+If you need to pass multiple options, separate them with a comma.
-m::
Attempt to detect merges based on the commit message. This option
a "git-write-tree" + "git-diff-tree". Thus that's the default mode.
The non-cached version asks the question:
- show me the differences between HEAD and the currently checked out
- tree - index contents _and_ files that aren't up-to-date
+ show me the differences between HEAD and the currently checked out
+ tree - index contents _and_ files that aren't up-to-date
which is obviously a very useful question too, since that tells you what
you *could* commit. Again, the output matches the "git-diff-tree -r"
get the real diff, you need to look at the object in the working directory
directly rather than do an object-to-object diff.
-NOTE! As with other commands of this type, "git-diff-index" does not
+NOTE: As with other commands of this type, "git-diff-index" does not
actually look at the contents of the file at all. So maybe
`kernel/sched.c` hasn't actually changed, and it's just that you
touched it. In either case, it's a note that you need to
"git-upate-cache" it to make the cache be in sync.
-NOTE 2! You can have a mixture of files show up as "has been updated"
+NOTE: You can have a mixture of files show up as "has been updated"
and "is still dirty in the working directory" together. You can always
tell which file is in which state, since the "has been updated" ones
show a valid sha1, and the "not in sync with the index" ones will
which tells you that the last commit changed just one file (it's from
this one:
- commit 3c6f7ca19ad4043e9e72fa94106f352897e651a8
- tree 5319e4d609cdd282069cc4dce33c1db559539b03
- parent b4e628ea30d5ab3606119d2ea5caeab141d38df7
- author Linus Torvalds <torvalds@ppc970.osdl.org> Sat Apr 9 12:02:30 2005
- committer Linus Torvalds <torvalds@ppc970.osdl.org> Sat Apr 9 12:02:30 2005
-
- Make "git-fsck-objects" print out all the root commits it finds.
-
- Once I do the reference tracking, I'll also make it print out all the
- HEAD commits it finds, which is even more interesting.
+-----------------------------------------------------------------------------
+commit 3c6f7ca19ad4043e9e72fa94106f352897e651a8
+tree 5319e4d609cdd282069cc4dce33c1db559539b03
+parent b4e628ea30d5ab3606119d2ea5caeab141d38df7
+author Linus Torvalds <torvalds@ppc970.osdl.org> Sat Apr 9 12:02:30 2005
+committer Linus Torvalds <torvalds@ppc970.osdl.org> Sat Apr 9 12:02:30 2005
+
+Make "git-fsck-objects" print out all the root commits it finds.
+
+Once I do the reference tracking, I'll also make it print out all the
+HEAD commits it finds, which is even more interesting.
+-----------------------------------------------------------------------------
in case you care).
Junio C Hamano <junkio@cox.net>
Documentation
---------------
+-------------
Documentation by David Greaves, Junio C Hamano and the git-list <git@vger.kernel.org>.
GIT
-------
<object>::
An object to treat as the head of an unreachability trace.
-
- If no objects are given, git-fsck-objects defaults to using the
- index file and all SHA1 references in .git/refs/* as heads.
++
+If no objects are given, git-fsck-objects defaults to using the
+index file and all SHA1 references in .git/refs/* as heads.
--unreachable::
Print out objects that exist but that aren't readable from any
GIT_INDEX_FILE::
used to specify the index file of the cache
-GIT_ALTERNATE_OBJECT_DIRECTORIES:
+GIT_ALTERNATE_OBJECT_DIRECTORIES::
used to specify additional object database roots (usually unset)
Author
-t::
Identify the file status with the following tags (followed by
a space) at the start of each line:
- H cached
- M unmerged
- R removed/deleted
- C modifed/changed
- K to be killed
+ H:: cached
+ M:: unmerged
+ R:: removed/deleted
+ C:: modifed/changed
+ K:: to be killed
? other
--::
These exclude patterns come from these places:
-
(1) command line flag --exclude=<pattern> specifies a single
+
1. command line flag --exclude=<pattern> specifies a single
pattern.
- (2) command line flag --exclude-from=<file> specifies a list of
+ 2. command line flag --exclude-from=<file> specifies a list of
patterns stored in a file.
- (3) command line flag --exclude-per-directory=<name> specifies
+ 3. command line flag --exclude-per-directory=<name> specifies
a name of the file in each directory 'git-ls-files'
examines, and if exists, its contents are used as an
additional list of patterns.
- otherwise, it is a shell glob pattern, suitable for
consumption by fnmatch(3) with FNM_PATHNAME flag. I.e. a
slash in the pattern must match a slash in the pathname.
- "Documentation/*.html" matches "Documentation/git.html" but
+ "Documentation/\*.html" matches "Documentation/git.html" but
not "ppc/ppc.html". As a natural exception, "/*.c" matches
"cat-file.c" but not "mozilla-sha1/sha1.c".
An example:
+--------------------------------------------------------------
$ cat .git/ignore
# ignore objects and archives, anywhere in the tree.
*.[oa]
--exclude='Documentation/*.[0-9]' \
--exclude-from=.git/ignore \
--exclude-per-directory=.gitignore
+--------------------------------------------------------------
See Also
See-Also
--------
-git-repack(1) git-prune-packed(1)
+gitlink:git-repack[1]
+gitlink:git-prune-packed[1]
GIT
---
See-Also
--------
-git-pack-objects(1) git-repack(1)
+gitlink:git-pack-objects[1]
+gitlink:git-repack[1]
GIT
---
When two trees are specified, the user is telling git-read-tree
the following:
- (1) The current index and work tree is derived from $H, but
+ 1. The current index and work tree is derived from $H, but
the user may have local changes in them since $H;
- (2) The user wants to fast-forward to $M.
+ 2. The user wants to fast-forward to $M.
In this case, the "git-read-tree -m $H $M" command makes sure
that no local change is lost as the result of this "merge".
See-Also
--------
-git-pack-objects(1) git-prune-packed(1)
+gitlink:git-pack-objects[1]
+gitlink:git-prune-packed[1]
GIT
---
means "list all the commits which are included in 'foo' and 'bar', but
not in 'baz'".
-If *--pretty* is specified, print the contents of the commit changesets
-in human-readable form.
-
-The *--objects* flag causes 'git-rev-list' to print the object IDs of
-any object referenced by the listed commits. 'git-rev-list --objects foo
-^bar' thus means "send me all object IDs which I need to download if
-I have the commit object 'bar', but not 'foo'".
-
-The *--bisect* flag limits output to the one commit object which is
-roughly halfway between the included and excluded commits. Thus,
-if 'git-rev-list --bisect foo ^bar
-^baz' outputs 'midpoint', the output
-of 'git-rev-list foo ^midpoint' and 'git-rev-list midpoint
-^bar
-^baz'
-would be of roughly the same length. Finding the change which introduces
-a regression is thus reduced to a binary search: repeatedly generate and
-test new 'midpoint's until the commit chain is of length one.
-
-If *--merge-order* is specified, the commit history is decomposed into a
-unique sequence of minimal, non-linear epochs and maximal, linear epochs.
-Non-linear epochs are then linearised by sorting them into merge order, which
-is described below.
-
+OPTIONS
+-------
+--pretty::
+ Print the contents of the commit changesets in human-readable form.
+
+--objects::
+ Print the object IDs of any object referenced by the listed commits.
+ 'git-rev-list --objects foo ^bar' thus means "send me all object IDs
+ which I need to download if I have the commit object 'bar', but
+ not 'foo'".
+
+--bisect::
+ Limit output to the one commit object which is roughly halfway
+ between the included and excluded commits. Thus, if 'git-rev-list
+ --bisect foo ^bar ^baz' outputs 'midpoint', the output
+ of 'git-rev-list foo ^midpoint' and 'git-rev-list midpoint
+ ^bar ^baz' would be of roughly the same length. Finding the change
+ which introduces a regression is thus reduced to a binary search:
+ repeatedly generate and test new 'midpoint's until the commit chain
+ is of length one.
+
+--merge-order::
+ When specified the commit history is decomposed into a unique
+ sequence of minimal, non-linear epochs and maximal, linear epochs.
+ Non-linear epochs are then linearised by sorting them into merge
+ order, which is described below.
++
Maximal, linear epochs correspond to periods of sequential development.
Minimal, non-linear epochs correspond to periods of divergent development
followed by a converging merge. The theory of epochs is described in more
detail at
link:http://blackcubes.dyndns.org/epoch/[http://blackcubes.dyndns.org/epoch/].
-
++
The merge order for a non-linear epoch is defined as a linearisation for which
the following invariants are true:
-
++
1. if a commit P is reachable from commit N, commit P sorts after commit N
in the linearised list.
2. if Pi and Pj are any two parents of a merge M (with i < j), then any
commit N, such that N is reachable from Pj but not reachable from Pi,
sorts before all commits reachable from Pi.
-
++
Invariant 1 states that later commits appear before earlier commits they are
derived from.
-
++
Invariant 2 states that commits unique to "later" parents in a merge, appear
before all commits from "earlier" parents of a merge.
-If *--show-breaks* is specified, each item of the list is output with a
-2-character prefix consisting of one of: (|), (^), (=) followed by a space.
-
+--show-breaks::
+ Each item of the list is output with a 2-character prefix consisting
+ of one of: (|), (^), (=) followed by a space.
++
Commits marked with (=) represent the boundaries of minimal, non-linear epochs
and correspond either to the start of a period of divergent development or to
the end of such a period.
-
++
Commits marked with (|) are direct parents of commits immediately preceding
the marked commit in the list.
-
++
Commits marked with (^) are not parents of the immediately preceding commit.
These "breaks" represent necessary discontinuities implied by trying to
represent an arbtirary DAG in a linear form.
-
++
*--show-breaks* is only valid if *--merge-order* is also specified.
Author
working tree does not have to match the HEAD commit.
The revert is done against the beginning state of your
working tree.
-
- This is useful when reverting more than one commits'
- effect to your working tree in a row.
++
+This is useful when reverting more than one commits'
+effect to your working tree in a row.
Author
specified on the command line, the user will be prompted with a ReadLine
enabled interface to provide the necessary information.
+OPTIONS
+-------
The options available are:
- --to
+--to::
Specify the primary recipient of the emails generated.
Generally, this will be the upstream maintainer of the
project involved.
- --from
+--from::
Specify the sender of the emails. This will default to
the value GIT_COMMITTER_IDENT, as returned by "git-var -l".
The user will still be prompted to confirm this entry.
- --compose
+--compose::
Use \$EDITOR to edit an introductory message for the
patch series.
- --subject
+--subject::
Specify the initial subject of the email thread.
Only necessary if --compose is also set. If --compose
is not set, this will be prompted for.
- --in-reply-to
+--in-reply-to::
Specify the contents of the first In-Reply-To header.
Subsequent emails will refer to the previous email
instead of this if --chain-reply-to is set (the default)
Only necessary if --compose is also set. If --compose
is not set, this will be prompted for.
- --chain-reply-to, --no-chain-reply-to
+--chain-reply-to, --no-chain-reply-to::
If this is set, each email will be sent as a reply to the previous
email sent. If disabled with "--no-chain-reply-to", all emails after
the first will be sent as replies to the first email sent. When using
entire patch series.
Default is --chain-reply-to
- --smtp-server
+--smtp-server::
If set, specifies the outgoing SMTP server to use. Defaults to
localhost.
Without '--all' and without any '<ref>', the refs that exist
both on the local side and on the remote side are updated.
-When '<ref>'s are specified explicitly, it can be either a
+When one or more '<ref>' are specified explicitly, it can be either a
single pattern, or a pair of such pattern separated by a colon
-':' (this means that a ref name cannot have a colon in it). A
+":" (this means that a ref name cannot have a colon in it). A
single pattern '<name>' is just a shorthand for '<name>:<name>'.
Each pattern pair consists of the source side (before the colon)
- If <dst> does not match any remote ref, either
- - it has to start with "refs/"; <dst> is used as the
+ * it has to start with "refs/"; <dst> is used as the
destination literally in this case.
- - <src> == <dst> and the ref that matched the <src> must not
+ * <src> == <dst> and the ref that matched the <src> must not
exist in the set of remote refs; the ref matched <src>
locally is used as the name of the destination.
Sets up the normal git environment variables and a few helper functions
(currently just "die()"), and returns ok if it all looks like a git archive.
-So use it something like
+So, to make the rest of the git scripts more careful and readable,
+use it as follows:
- . git-sh-setup || die "Not a git archive"
-
-to make the rest of the git scripts more careful and readable.
+-------------------------------------------------
+. git-sh-setup || die "Not a git archive"
+-------------------------------------------------
Author
------
current working directory. This is useful for minimum-checkout
merging.
- To pretend you have a file with mode and sha1 at path, say:
+To pretend you have a file with mode and sha1 at path, say:
$ git-update-index --cacheinfo mode sha1 path
-----------
Prints a git logical variable.
--l causes the logical variables to be listed.
+OPTIONS
+-------
+-l::
+ Cause the logical variables to be listed.
EXAMPLE
--------
-$git-var GIT_AUTHOR_IDENT
-
-Eric W. Biederman <ebiederm@lnxi.com> 1121223278 -0600
+ $ git-var GIT_AUTHOR_IDENT
+ Eric W. Biederman <ebiederm@lnxi.com> 1121223278 -0600
VARIABLES
----------
-GIT_AUTHOR_IDENT
+GIT_AUTHOR_IDENT::
The author of a piece of code.
-GIT_COMMITTER_IDENT
+GIT_COMMITTER_IDENT::
The person who put a piece of code into git.
Diagnostics
-v::
After verifying the pack, show list of objects contained
- in the pack. The format used is:
+ in the pack.
- SHA1 type size offset-in-packfile
+OUTPUT FORMAT
+-------------
+When specifying the -v option the format used is:
- for objects that are not deltified in the pack, and
+ SHA1 type size offset-in-packfile
- SHA1 type size offset-in-packfile depth base-SHA1
+for objects that are not deltified in the pack, and
- for objects that are deltified.
+ SHA1 type size offset-in-packfile depth base-SHA1
+
+for objects that are deltified.
Author
------
The "remote" repository to pull from. One of the
following notations can be used to name the repository
to pull from:
-
- Rsync URL
- rsync://remote.machine/path/to/repo.git/
-
- HTTP(s) URL
- http://remote.machine/path/to/repo.git/
-
- GIT URL
- git://remote.machine/path/to/repo.git/
- remote.machine:/path/to/repo.git/
-
- Local directory
- /path/to/repo.git/
-
- In addition to the above, as a short-hand, the name of a
- file in $GIT_DIR/remotes directory can be given; the
- named file should be in the following format:
-
- URL: one of the above URL format
- Push: <refspec>...
- Pull: <refspec>...
-
- When such a short-hand is specified in place of
- <repository> without <refspec> parameters on the command
- line, <refspec>... specified on Push lines or Pull lines
- are used for "git push" and "git fetch/pull",
- respectively.
-
- The name of a file in $GIT_DIR/branches directory can be
- specified as an older notation short-hand; the named
- file should contain a single line, a URL in one of the
- above formats, optionally followed by a hash '#' and the
- name of remote head (URL fragment notation).
- $GIT_DIR/branches/<remote> file that stores a <url>
- without the fragment is equivalent to have this in the
- corresponding file in the $GIT_DIR/remotes/ directory
-
- URL: <url>
- Pull: refs/heads/master:<remote>
-
- while having <url>#<head> is equivalent to
-
- URL: <url>
- Pull: refs/heads/<head>:<remote>
++
+===============================================================
+- Rsync URL: rsync://remote.machine/path/to/repo.git/
+- HTTP(s) URL: http://remote.machine/path/to/repo.git/
+- GIT URL: git://remote.machine/path/to/repo.git/
+ or remote.machine:/path/to/repo.git/
+- Local directory: /path/to/repo.git/
+===============================================================
++
+In addition to the above, as a short-hand, the name of a
+file in $GIT_DIR/remotes directory can be given; the
+named file should be in the following format:
++
+ URL: one of the above URL format
+ Push: <refspec>...
+ Pull: <refspec>...
++
+When such a short-hand is specified in place of
+<repository> without <refspec> parameters on the command
+line, <refspec>... specified on Push lines or Pull lines
+are used for "git push" and "git fetch/pull",
+respectively.
++
+The name of a file in $GIT_DIR/branches directory can be
+specified as an older notation short-hand; the named
+file should contain a single line, a URL in one of the
+above formats, optionally followed by a hash '#' and the
+name of remote head (URL fragment notation).
+$GIT_DIR/branches/<remote> file that stores a <url>
+without the fragment is equivalent to have this in the
+corresponding file in the $GIT_DIR/remotes/ directory
++
+ URL: <url>
+ Pull: refs/heads/master:<remote>
++
+while having <url>#<head> is equivalent to
++
+ URL: <url>
+ Pull: refs/heads/<head>:<remote>
<refspec>::
The canonical format of a <refspec> parameter is
'+?<src>:<dst>'; that is, an optional plus '+', followed
by the source ref, followed by a colon ':', followed by
the destination ref.
-
- When used in "git push", the <src> side can be an
- arbitrary "SHA1 expression" that can be used as an
- argument to "git-cat-file -t". E.g. "master~4" (push
- four parents before the current master head).
-
- For "git push", the local ref that matches <src> is used
- to fast forward the remote ref that matches <dst>. If
- the optional plus '+' is used, the remote ref is updated
- even if it does not result in a fast forward update.
-
- For "git fetch/pull", the remote ref that matches <src>
- is fetched, and if <dst> is not empty string, the local
- ref that matches it is fast forwarded using <src>.
- Again, if the optional plus '+' is used, the local ref
- is updated even if it does not result in a fast forward
- update.
-
- Some short-cut notations are also supported.
-
- * For backward compatibility, "tag" is almost ignored;
- it just makes the following parameter <tag> to mean a
- refspec "refs/tags/<tag>:refs/tags/<tag>".
-
- * A parameter <ref> without a colon is equivalent to
- <ref>: when pulling/fetching, and <ref>:<ref> when
- pushing. That is, do not store it locally if
- fetching, and update the same name if pushing.
++
+When used in "git push", the <src> side can be an
+arbitrary "SHA1 expression" that can be used as an
+argument to "git-cat-file -t". E.g. "master~4" (push
+four parents before the current master head).
++
+For "git push", the local ref that matches <src> is used
+to fast forward the remote ref that matches <dst>. If
+the optional plus '+' is used, the remote ref is updated
+even if it does not result in a fast forward update.
++
+For "git fetch/pull", the remote ref that matches <src>
+is fetched, and if <dst> is not empty string, the local
+ref that matches it is fast forwarded using <src>.
+Again, if the optional plus '+' is used, the local ref
+is updated even if it does not result in a fast forward
+update.
++
+Some short-cut notations are also supported.
++
+* For backward compatibility, "tag" is almost ignored;
+ it just makes the following parameter <tag> to mean a
+ refspec "refs/tags/<tag>:refs/tags/<tag>".
+* A parameter <ref> without a colon is equivalent to
+ <ref>: when pulling/fetching, and <ref>:<ref> when
+ pushing. That is, do not store it locally if
+ fetching, and update the same name if pushing.
-a, \--append::
Append ref names and object names of fetched refs to the