When we are rebasing without options ('am' mode), the head rebased lives
in '$g/rebase-apply/head-name', so lets use that information so it's
reported the same way as if we were doing other rebases (-i or -m).
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
rebase: implement --[no-]autostash and rebase.autostash
This new feature allows a rebase to be executed on a dirty worktree or
index. It works by creating a temporary "dangling merge commit" out
of the worktree and index changes (via 'git stash create'), and
automatically applying it after a successful rebase or abort.
rebase stores the SHA-1 hex of the temporary merge commit, along with
the rest of the rebase state, in either
.git/{rebase-merge,rebase-apply}/autostash depending on the kind of
rebase. Since $state_dir is automatically removed at the end of a
successful rebase or abort, so is the autostash.
The advantage of this approach is that we do not affect the normal
stash's reflogs, making the autostash invisible to the end-user. This
means that you can use 'git stash' during a rebase as usual.
When the autostash application results in a conflict, we push
$state_dir/autostash onto the normal stash and remove $state_dir
ending the rebase. The user can inspect the stash, and pop or drop at
any time.
Most significantly, this feature means that a caller like pull (with
pull.rebase set to true) can easily be patched to remove the
require_clean_work_tree restriction.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-remote-mediawiki: better error message when HTTP(S) access fails
My use-case is an invalid SSL certificate. Pulling from the wiki with a
recent version of libwww-perl fails, and git-remote-mediawiki gave no
clue about the reason. Give the mediawiki API detailed error message, and
since it is not so informative, hint the user about an invalid SSL
certificate on https:// urls.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr> Signed-off-by: Junio C Hamano <gitster@pobox.com>
commit: don't start editor if empty message is given with -m
If an empty message is specified with the option -m of git commit then
the editor is started. That's unexpected and unnecessary. Instead of
using the length of the message string for checking if the user
specified one, directly remember if the option -m was given.
Reported-by: Mislav Marohnić <mislav.marohnic@gmail.com> Signed-off-by: René Scharfe <rene.scharfe@lsrfire.ath.cx> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add protocol imap, imaps, ftp and smtp for credential-osxkeychain.
Signed-off-by: Xidorn Quan <quanxunzhen@gmail.com> Acked-by: John Szakmeister <john@szakmeister.net> Acked-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
In diff_tree_combined we make a copy of diffopts. In
try_to_follow_renames, called via diff_tree_sha1, we free and
re-initialize diffopts->pathspec->items. Since we did not make a deep
copy of diffopts in diff_tree_combined, the original diffopts does not
get the update. By the time we return from diff_tree_combined,
rev->diffopt->pathspec->items points to an invalid memory address. We
get a segfault next time we try to access that pathspec.
Instead, along with the copy of diffopts, make a copy pathspec->items as
well.
We would also have to make a copy of pathspec->raw to keep it consistent
with pathspec->items, but nobody seems to rely on that.
Signed-off-by: Clemens Buchacher <drizzd@aon.at> Signed-off-by: Junio C Hamano <gitster@pobox.com>
send-email: remove warning about unset chainreplyto
Three years and a half is probably more than enough time to give users
the opportunity to configure Git to do what they want. If they haven't
changed the configuration by now, this warning message is not going to
do anything for them anyway.
This effectively reverts commit 528fb08 (prepare send-email for smoother
change of --chain-reply-to default).
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
, which wedged a pointer to parent into the object_array_entry's name
field. The parent pointer was passed to traverse_one_object(), even
though that function *didn't use it*.
The useless code has been deleted over time. Commit
a1cdc25172 fsck: drop unused parameter from traverse_one_object()
removed the parent pointer from traverse_one_object()'s
signature. Commit
object_array_remove_duplicates(): rewrite to reduce copying
The old version copied one entry to its destination position, then
deleted any matching entries from the tail of the array. This
required the tail of the array to be copied multiple times. It didn't
affect the complexity of the algorithm because the whole tail has to
be searched through anyway. But all the copying was unnecessary.
Instead, check for the existence of an entry with the same name in the
*head* of the list before copying an entry to its final position.
This way each entry has to be copied at most one time.
Extract a helper function contains_name() to do a bit of the work.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a function that allows unwanted entries in an object_array to be
removed. This encapsulation is a step towards giving object_array
ownership of its entries' name memory.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
cmd_diff(): make it obvious which cases are exclusive of each other
At first glance the OBJ_COMMIT, OBJ_TREE, and OBJ_BLOB cases look like
they might be mutually exclusive. But the OBJ_COMMIT case doesn't end
the loop iteration with "continue" like the other two cases, but
rather falls through. So use if...else if...else construct to make it
more obvious that only the last two cases are mutually exclusive.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
add_rev_cmdline(): make a copy of the name argument
Instead of assuming that the memory pointed to by the name argument
will live forever, make a local copy of it before storing it in the
ref_cmdline_info.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Do not retain a reference to the refname passed to the each_ref_fn
callback get_name(), because there is no guarantee of the lifetimes of
these names. Instead, make a local copy when needed.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
prune-packed: avoid implying "1" is DRY_RUN in prune_packed_objects()
Commit b60daf0 (Make git-prune-packed a bit more chatty. - 2007-01-12)
changes the meaning of prune_packed_objects()'s argument, from "dry
run or not dry run" to a bitmap.
It however forgot to update prune_packed_objects() caller in
builtin/prune.c to use new DRY_RUN macro. It's fine (for a long time!)
but there is a risk that someday someone may change the value of
DRY_RUN to something else and builtin/prune.c suddenly breaks. Avoid
that possibility.
While at there, change "opts == VERBOSE" to "opts & VERBOSE" as there
is no obvious reason why we only be chatty when DRY_RUN is not set.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
fetch: don't try to update unfetched tracking refs
Since commit f269048 (fetch: opportunistically update tracking refs,
2013-05-11) we update tracking refs opportunistically when fetching
remote branches. However, if there is a configured non-pattern refspec
that does not match any of the refspecs given on the command line then a
fatal error occurs.
Fix this by setting the "missing_ok" flag when calling get_fetch_map.
Test-added-by: Jeff King <peff@peff.net> Signed-off-by: John Keeping <john@keeping.me.uk> Acked-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
In order to make sure the cloned repository is good, we run "rev-list
--objects --not --all $new_refs" on the repository. This is expensive
on large repositories. This patch attempts to mitigate the impact in
this special case.
In the "good" clone case, we only have one pack. If all of the
following are met, we can be sure that all objects reachable from the
new refs exist, which is the intention of running "rev-list ...":
- all refs point to an object in the pack
- there are no dangling pointers in any object in the pack
- no objects in the pack point to objects outside the pack
The second and third checks can be done with the help of index-pack as
a slight variation of --strict check (which introduces a new condition
for the shortcut: pack transfer must be used and the number of objects
large enough to call index-pack). The first is checked in
check_everything_connected after we get an "ok" from index-pack.
"index-pack + new checks" is still faster than the current "index-pack
+ rev-list", which is the whole point of this patch. If any of the
conditions fail, we fall back to the good old but expensive "rev-list
..". In that case it's even more expensive because we have to pay for
the new checks in index-pack. But that should only happen when the
other side is either buggy or malicious.
Cloning linux-2.6 over file://
before after
real 3m25.693s 2m53.050s
user 5m2.037s 4m42.396s
sys 0m13.750s 0m16.574s
A more realistic test with ssh:// over wireless
before after
real 11m26.629s 10m4.213s
user 5m43.196s 5m19.444s
sys 0m35.812s 0m37.630s
This shortcut is not applied to shallow clones, partly because shallow
clones should have no more objects than a usual fetch and the cost of
rev-list is acceptable, partly to avoid dealing with corner cases when
grafting is involved.
This shortcut does not apply to unpack-objects code path either
because the number of objects must be small in order to trigger that
code path.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
fetch-pack: prepare updated shallow file before fetching the pack
index-pack --strict looks up and follows parent commits. If shallow
information is not ready by the time index-pack is run, index-pack may
be led to non-existent objects. Make fetch-pack save shallow file to
disk before invoking index-pack.
git learns new global option --shallow-file to pass on the alternate
shallow file path. Undocumented (and not even support --shallow-file=
syntax) because it's unlikely to be used again elsewhere.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The one from mercurial does a ton of things we are not interested in,
and we need some special modifications which are impossible otherwise.
Most of the code is borrowed from Mercurial, and cleaned up, but should
be functionally the same for our purposes, except that multiple heads
are not detected.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
If we update the 'old' node, we might be updating the remote bookmark
even when our 'new' node is not related at all to what the remote has,
effectively forcing an update.
Let's do that only when forced push is configured.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Neither mercurial nor git allows pushing to a remote when it's a
non-fast-forward push. We should be able to detect these errors and
report them properly, as opposed to throwing an exception
stack-trace.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The logic when working with a local repository is totally different from
the one where we work with a remote repository; we need to pull and push
from it.
All this logic is currently not tested at all, so let's introduce a
variable to force the remote behavior.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Mercurial always checks out the 'default' branch, so there's no point in
complicating our lives trying to do something fancier, which causes
different behavior depending on whether the repository is local or
remote.
So let's always use 'default' (which we translate to 'master'), unless
we are in hg-git mode, which expects us to use the 'master' bookmark
instead.
Also, update the tests that used to check for different checkout
behaviors to simply check that the refs are there, remove unnecessary
ones, and fix the ones that expect something different.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the user specified a list of branches, we ignore what the remote
repository lists, and simply use the branches directly. Since some
remotes don't report the branches correctly, this is useful.
Otherwise either fetch the repo, or the branch.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
bisect: Fix log output for multi-parent skip ranges
The bisect log output of skipped commits introduced in f989cac "bisect:
Log possibly bad, skipped commits at bisection end" should obtain the range of
skipped commits from
git rev-list bad --not good-1 good-2
not
git rev-list bad --not good-1 --not good-2
when the skipped range contains a merge with good points in each parent.
Signed-off-by: Torstein Hegge <hegge@resisty.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, when no (valid) upstream is configured for a branch, you get
an error like:
$ git show @{u}
error: No upstream configured for branch 'upstream-error'
error: No upstream configured for branch 'upstream-error'
fatal: ambiguous argument '@{u}': unknown revision or path not in the working tree.
Use '--' to separate paths from revisions, like this:
'git <command> [<revision>...] -- [<file>...]'
The "error: " line actually appears twice, and the rest of the error
message is useless. In sha1_name.c:interpret_branch_name(), there is
really no point in processing further if @{u} couldn't be resolved, and
we might as well die() instead of returning an error(). After making
this change, you get:
$ git show @{u}
fatal: No upstream configured for branch 'upstream-error'
Also tweak a few tests in t1507 to expect this output.
This only turns error() that may be called after we know we are
dealing with an @{upstream} marker into die(), without touching
silent error returns "return -1" from the function. Any caller that
wants to handle an error condition itself will not be hurt by this
change, unless they want to see the message from error() and then
exit silently without giving its own message, which needs to be
fixed anyway.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently the __git_ps1 git prompt gives the following error with a
repository converted by git-svn, when used with zsh:
__git_ps1_show_upstream:19: bad pattern: svn_remote[
__git_ps1_show_upstream:45: bad substitution
To reproduce the problem, the __git_ps1_show_upstream function can be
executed in a repository converted with git-svn. Both those errors are
triggered by spaces after the '['.
Zsh also doesn't support initializing an array with `local var=(...)`.
This triggers the following error:
__git_ps1_show_upstream:41: bad pattern: svn_upstream=(commit
Use
local -a
var=(...)
instead to make is compatible.
This was introduced by 6d158cba (bash completion: Support "divergence
from upstream" messages in __git_ps1), when the script was for bash
only.
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com> Acked-by: Felipe Contreras <felipe.contreras@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
imap-send: eliminate HMAC deprecation warnings on Mac OS X
As of Mac OS X 10.7, Apple deprecated all OpenSSL functions due to
OpenSSL ABI instability. Silence the warnings by using Apple's
CommonCrypto HMAC replacement functions.
[es: reworded commit message; check APPLE_COMMON_CRYPTO instead of
abusing COMMON_DIGEST_FOR_OPENSSL]
Signed-off-by: David Aguilar <davvid@gmail.com> Signed-off-by: Eric Sunshine <sunshine@sunshineco.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
These remote helpers use 'env python', not PYTHON_PATH, so that's where
we should check for the extensions. Otherwise, if 'python' is not
PYTHON_PATH (e.g. /usr/bin/python: Makefile's default), there will be a
mismatch between the python libraries actually accessible to the remote
helpers.
Suggested by: Torsten Bögershausen <tboegi@web.de> Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>