Over some transports, fetching objects with an exact commit object
name can be done without first seeing the ref advertisements. The
code has been optimized to exploit this.
* jt/avoid-ls-refs:
fetch: do not list refs if fetching only hashes
transport: list refs before fetch if necessary
transport: do not list refs if possible
transport: allow skipping of ref listing
A partial clone that is configured to lazily fetch missing objects
will on-demand issue a "git fetch" request to the originating
repository to fill not-yet-obtained objects. The request has been
optimized for requesting a tree object (and not the leaf blob
objects contained in it) by telling the originating repository that
no blobs are needed.
* jt/non-blob-lazy-fetch:
fetch-pack: exclude blobs when lazy-fetching trees
fetch-pack: avoid object flags if no_dependents
The oidset API was built on top of the oidmap API which in turn is
on the hashmap API. Replace the implementation to build on top of
the khash API and gain performance.
* rs/oidset-on-khash:
oidset: uninline oidset_init()
oidset: use khash
khash: factor out kh_release_*
fetch-pack: load tip_oids eagerly iff needed
fetch-pack: factor out is_unmatched_ref()
Unlike "grep", "git grep" by default recurses to the whole tree.
The command learned "git grep --recursive" option, so that "git
grep --no-recursive" can serve as a synonym to setting the
max-depth to 0.
"git help -a" and "git help -av" give different pieces of
information, and generally the "verbose" version is more friendly
to the new users. "git help -a" by default now uses the more
verbose output (with "--no-verbose", you can go back to the
original). Also "git help -av" now lists aliases and external
commands, which it did not used to.
* nd/help-commands-verbose-by-default:
help -a: improve and make --verbose default
"git fetch $repo $object" in a partial clone did not correctly
fetch the asked-for object that is referenced by an object in
promisor packfile, which has been fixed.
* jt/fetch-tips-in-partial-clone:
fetch: in partial clone, check presence of targets
connected: document connectivity in partial clones
A new extension to the index file has been introduced, which allows
the file to be read in parallel.
* bp/read-cache-parallel:
read-cache: load cache entries on worker threads
ieot: add Index Entry Offset Table (IEOT) extension
read-cache: load cache extensions on a worker thread
config: add new index.threads config setting
eoie: add End of Index Entry (EOIE) extension
read-cache: clean up casting and byte decoding
read-cache.c: optimize reading index format v4
Some environment variables that control the runtime options of Git
used during tests are getting renamed for consistency.
* bp/rename-test-env-var:
t0000: do not get self-test disrupted by environment warnings
preload-index: update GIT_FORCE_PRELOAD_TEST support
read-cache: update TEST_GIT_INDEX_VERSION support
fsmonitor: update GIT_TEST_FSMONITOR support
preload-index: use git_env_bool() not getenv() for customization
t/README: correct spelling of "uncommon"
Code clean-up in the internal machinery used by "git status" and
"git commit --dry-run".
* ss/wt-status-committable:
roll wt_status_state into wt_status and populate in the collect phase
wt-status.c: set the committable flag in the collect phase
t7501: add test of "commit --dry-run --short"
wt-status: rename commitable to committable
wt-status.c: move has_unmerged earlier in the file
The minimum version of Windows supported by Windows port fo Git is
now set to Vista.
* js/mingw-wants-vista-or-above:
mingw: bump the minimum Windows version to Vista
mingw: set _WIN32_WINNT explicitly for Git for Windows
compat/poll: prepare for targeting Windows Vista
* ma/commit-graph-docs:
Doc: refer to the "commit-graph file" with dash
git-commit-graph.txt: refer to "*commit*-graph file"
git-commit-graph.txt: typeset more in monospace
git-commit-graph.txt: fix bullet lists
The code in "git status" sometimes hit an assertion failure. This
was caused by a structure that was reused without cleaning the data
used for the first run, which has been corrected.
* en/status-multiple-renames-to-the-same-target-fix:
commit: fix erroneous BUG, 'multiple renames on the same target? how?'
"gc --auto" ended up calling exit(-1) upon error, which has been
corrected to use exit(1). Also the error reporting behaviour when
daemonized has been updated to exit with zero status when stopping
due to a previously discovered error (which implies there is no
point running gc to improve the situation); we used to exit with
failure in such a case.
* jn/gc-auto:
gc: do not return error for prior errors in daemonized mode
* fe/doc-updates:
git-describe.1: clarify that "human readable" is also git-readable
git-column.1: clarify initial description, provide examples
git-archimport.1: specify what kind of Arch we're talking about
* en/merge-cleanup:
merge-recursive: rename merge_file_1() and merge_content()
merge-recursive: remove final remaining caller of merge_file_one()
merge-recursive: avoid wrapper function when unnecessary and wasteful
merge-recursive: set paths correctly when three-way merging content
An alias that expands to another alias has so far been forbidden,
but now it is allowed to create such an alias.
* ts/alias-of-alias:
t0014: introduce an alias testing suite
alias: show the call history when an alias is looping
alias: add support for aliases of an alias
The recently introduced commit-graph auxiliary data is incompatible
with mechanisms such as replace & grafts that "breaks" immutable
nature of the object reference relationship. Disable optimizations
based on its use (and updating existing commit-graph) when these
incompatible features are in use in the repository.
* ds/commit-graph-with-grafts:
commit-graph: close_commit_graph before shallow walk
commit-graph: not compatible with uninitialized repo
commit-graph: not compatible with grafts
commit-graph: not compatible with replace objects
test-repository: properly init repo
commit-graph: update design document
refs.c: upgrade for_each_replace_ref to be a each_repo_ref_fn callback
refs.c: migrate internal ref iteration to pass thru repository argument
Generation of (experimental) commit-graph files have so far been
fairly silent, even though it takes noticeable amount of time in a
meaningfully large repository. The users will now see progress
output.
This patch helps address the CPU cost of loading the index by utilizing
the Index Entry Offset Table (IEOT) to divide loading and conversion of
the cache entries across multiple threads in parallel.
I used p0002-read-cache.sh to generate some performance data:
Test w/100,000 files reduced the time by 32.24%
Test w/1,000,000 files reduced the time by -4.77%
Note that on the 1,000,000 files case, multi-threading the cache entry parsing
does not yield a performance win. This is because the cost to parse the
index extensions in this repo, far outweigh the cost of loading the cache
entries.
The high cost of parsing the index extensions is driven by the cache tree
and the untracked cache extensions. As this is currently the longest pole,
any reduction in this time will reduce the overall index load times so is
worth further investigation in another patch series.
Signed-off-by: Ben Peart <benpeart@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
ieot: add Index Entry Offset Table (IEOT) extension
This patch enables addressing the CPU cost of loading the index by adding
additional data to the index that will allow us to efficiently multi-
thread the loading and conversion of cache entries.
It accomplishes this by adding an (optional) index extension that is a
table of offsets to blocks of cache entries in the index file. To make
this work for V4 indexes, when writing the cache entries, it periodically
"resets" the prefix-compression by encoding the current entry as if the
path name for the previous entry is completely different and saves the
offset of that entry in the IEOT. Basically, with V4 indexes, it
generates offsets into blocks of prefix-compressed entries.
Signed-off-by: Ben Peart <benpeart@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
read-cache: load cache extensions on a worker thread
This patch helps address the CPU cost of loading the index by loading
the cache extensions on a worker thread in parallel with loading the cache
entries.
In some cases, loading the extensions takes longer than loading the
cache entries so this patch utilizes the new EOIE to start the thread to
load the extensions before loading all the cache entries in parallel.
This is possible because the current extensions don't access the cache
entries in the index_state structure so are OK that they don't all exist
yet.
The CACHE_EXT_TREE, CACHE_EXT_RESOLVE_UNDO, and CACHE_EXT_UNTRACKED
extensions don't even get a pointer to the index so don't have access to the
cache entries.
CACHE_EXT_LINK only uses the index_state to initialize the split index.
CACHE_EXT_FSMONITOR only uses the index_state to save the fsmonitor last
update and dirty flags.
I used p0002-read-cache.sh to generate some performance data:
Test w/100,000 files reduced the time by 0.53%
Test w/1,000,000 files reduced the time by 27.78%
Signed-off-by: Ben Peart <benpeart@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add support for a new index.threads config setting which will be used to
control the threading code in do_read_index(). A value of 0 will tell the
index code to automatically determine the correct number of threads to use.
A value of 1 will make the code single threaded. A value greater than 1
will set the maximum number of threads to use.
For testing purposes, this setting can be overwritten by setting the
GIT_TEST_INDEX_THREADS=<n> environment variable to a value greater than 0.
Signed-off-by: Ben Peart <benpeart@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The End of Index Entry (EOIE) is used to locate the end of the variable
length index entries and the beginning of the extensions. Code can take
advantage of this to quickly locate the index extensions without having
to parse through all of the index entries.
The EOIE extension is always written out to the index file including to
the shared index when using the split index feature. Because it is always
written out, the SHA checksums in t/t1700-split-index.sh were updated
to reflect its inclusion.
It is written as an optional extension to ensure compatibility with other
git implementations that do not yet support it. It is always written out
to ensure it is available as often as possible to speed up index operations.
Because it must be able to be loaded before the variable length cache
entries and other index extensions, this extension must be written last.
The signature for this extension is { 'E', 'O', 'I', 'E' }.
The extension consists of:
- 32-bit offset to the end of the index entries
- 160-bit SHA-1 over the extension types and their sizes (but not
their contents). E.g. if we have "TREE" extension that is N-bytes
long, "REUC" extension that is M-bytes long, followed by "EOIE",
then the hash would be:
SHA-1("TREE" + <binary representation of N> +
"REUC" + <binary representation of M>)
Signed-off-by: Ben Peart <benpeart@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update fsck.skipList implementation and documentation.
* ab/fsck-skiplist:
fsck: support comments & empty lines in skipList
fsck: use oidset instead of oid_array for skipList
fsck: use strbuf_getline() to read skiplist file
fsck: add a performance test for skipList
fsck: add a performance test
fsck: document that skipList input must be unabbreviated
fsck: document and test commented & empty line skipList input
fsck: document and test sorted skipList input
fsck tests: add a test for no skipList input
fsck tests: setup of bogus commit object
Various tests have been updated to make it easier to swap the
hash function used for object identification.
* bc/hash-independent-tests:
t5318: use test_oid for HASH_LEN
t1407: make hash size independent
t1406: make hash-size independent
t1405: make hash size independent
t1400: switch hard-coded object ID to variable
t1006: make hash size independent
t0064: make hash size independent
t0002: abstract away SHA-1 specific constants
t0000: update tests for SHA-256
t0000: use hash translation table
t: add test functions to translate hash-related values
* nd/test-tool:
Makefile: add a hint about TEST_BUILTINS_OBJS
t/helper: merge test-dump-fsmonitor into test-tool
t/helper: merge test-parse-options into test-tool
t/helper: merge test-pkt-line into test-tool
t/helper: merge test-dump-untracked-cache into test-tool
t/helper: keep test-tool command list sorted
Split Documentation/config.txt for easier maintenance.
* nd/config-split:
config.txt: move submodule part out to a separate file
config.txt: move sequence.editor out of "core" part
config.txt: move sendemail part out to a separate file
config.txt: move receive part out to a separate file
config.txt: move push part out to a separate file
config.txt: move pull part out to a separate file
config.txt: move gui part out to a separate file
config.txt: move gitcvs part out to a separate file
config.txt: move format part out to a separate file
config.txt: move fetch part out to a separate file
config.txt: follow camelCase naming
The sample code calls `get_revision()' followed by `graph_update()',
but the documentation and source code indicate that `get_revision()'
already calls `graph_update()' for you.
Signed-off-by: Michael Witten <mfwitten@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
If only hash literals are given on a "git fetch" command-line, tag
following is not requested, and the fetch is done using protocol v2, a
list of refs is not required from the remote. Therefore, optimize by
invoking transport_get_remote_refs() only if we need the refs.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The built-in bundle transport and the transport helper interface do not
work when transport_fetch_refs() is called immediately after transport
creation. This will be needed in a subsequent patch, so fix this.
Evidence: fetch_refs_from_bundle() relies on data->header being
initialized in get_refs_from_bundle(), and fetch() in transport-helper.c
relies on either data->fetch or data->import being set by get_helper(),
but neither transport_helper_init() nor fetch() calls get_helper().
Up until the introduction of the partial clone feature, this has not
been a problem, because transport_fetch_refs() is always called after
transport_get_remote_refs(). With the introduction of the partial clone
feature, which involves calling transport_fetch_refs() (to fetch objects
by their OIDs) without transport_get_remote_refs(), this is still not a
problem, but only coincidentally - we do not support partially cloning a
bundle, and as for cloning using a transport-helper-using protocol, it
so happens that before transport_fetch_refs() is called, fetch_refs() in
fetch-object.c calls transport_set_option(), which means that the
aforementioned get_helper() is invoked through set_helper_option() in
transport-helper.c.
This could be fixed by fixing the transports themselves, but it doesn't
seem like a good idea to me to open up previously untested code paths;
also, there may be transport helpers in the wild that assume that "list"
is always called before "fetch". Instead, fix this by having
transport_fetch_refs() call transport_get_remote_refs() to ensure that
the latter is always called at least once, unless the transport
explicitly states that it supports fetching without listing refs.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
When all refs to be fetched are exact OIDs, it is possible to perform a
fetch without requiring the remote to list refs if protocol v2 is used.
Teach Git to do this.
This currently has an effect only for lazy fetches done from partial
clones. The change necessary to likewise optimize "git fetch <remote>
<sha-1>" will be done in a subsequent patch.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The get_refs_via_connect() function both performs the handshake
(including determining the protocol version) and obtaining the list of
remote refs. However, the fetch protocol v2 supports fetching objects
without the listing of refs, so make it possible for the user to skip
the listing by creating a new handshake() function. This will be used in
a subsequent commit.
It is a common mistake to put positional arguments before flags when
invoking git-rev-list. Order the positional arguments last.
This patch skips git-rev-list invocations which include the --not flag,
since the ordering of flags and positional arguments affects the
behavior. This patch also skips invocations of git-rev-list that occur
in command substitution in which the exit code is discarded, since
fixing those properly will require a more involved cleanup.
Signed-off-by: Matthew DeVore <matvore@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
'git ... | foo' will mask any errors or crashes in git, so split up such
pipes in this file.
One testcase uses several separate pipe sequences in a row which are
awkward to split up. Wrap the split-up pipe in a function so the
awkwardness is not repeated. Also change that testcase's surrounding
quotes from double to single to avoid premature string interpolation.
Signed-off-by: Matthew DeVore <matvore@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some pipes in tests lose the exit code of git processes, which can mask
unexpected behavior like crashes. Split these pipes up so that git
commands are only at the end of pipes rather than the beginning or
middle.
The violations fixed in this patch were found in the process of fixing
pipe placement in a prior patch.
Signed-off-by: Matthew DeVore <matvore@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of using a line-continuation and pipe on the second line, take
advantage of the shell's implicit line continuation after a pipe
character. So for example, instead of
some long line \
| next line
use
some long line |
next line
And add a blank line before and after the pipe where it aids readability
(it usually does).
This better matches the coding style documented in
Documentation/CodingGuidelines and used in shell scripts elsewhere in
the tree.
Signed-off-by: Matthew DeVore <matvore@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The list of Don'ts for test writing has grown large such that it is hard
to see at a glance which section an item is in. In other words, if I
ignore a little bit of surrounding context, the "don'ts" look like
"do's."
To make the list more readable, prefix "Don't" in front of every first
sentence in the items.
Also, the "Keep in mind" list is out of place and awkward, because it
was a very short "list" beneath two very long ones, and it seemed easy
to miss under the list of "don'ts," and it only had one item. So move
this item to the list of "do's" and phrase as "Remember..."
Signed-off-by: Matthew DeVore <matvore@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
While writing a commit-graph file, we store the full list of
commits in a flat list. We use this list for sorting and ensuring
we are closed under reachability.
The initial allocation assumed that (at most) one in four objects
is a commit. This is a dramatic over-count for many repos,
especially large ones. Since we grow the repo dynamically, reduce
this count by a factor of eight. We still set it to a minimum of
1024 before allocating.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
`graph_verify()`, `graph_read()` and `graph_write()` do the hard work of
`cmd_commit_graph()`. As soon as these return, so does
`cmd_commit_graph()`.
`strbuf_getline()` may allocate memory in the strbuf, yet return EOF.
We need to release the strbuf or UNLEAK it. Go for the latter since we
are close to returning from `graph_write()`.
`graph_write()` also fails to free the strings in the string list. They
have been added to the list with `strdup_strings` set to 0. We could
flip `strdup_strings` before clearing the list, which is our usual hack
in situations like this. But since we are about to exit, let's just
UNLEAK the whole string list instead.
UNLEAK `graph` in `graph_verify`. While at it, and for consistency,
UNLEAK in `graph_read()` as well, and remove an unnecessary UNLEAK just
before dying.
Signed-off-by: Martin Ågren <martin.agren@gmail.com> Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The write_commit_graph() method in commit-graph.c leaks some lits
and strings during execution. In addition, a list of strings is
leaked in write_commit_graph_reachable(). Clean these up so our
memory checking is cleaner.
Further, if we use a list of pack-files to find the commits, we
can leak the packed_git structs after scanning them for commits.
Running the following commands demonstrates the leak before and
the fix after:
Signed-off-by: Martin Ågren <martin.agren@gmail.com> Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Free the hashmap items as well as the hashmap itself. This was found
with asan.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk> Reviewed-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is obvious in retrospect, it was found with asan.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk> Reviewed-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Don't duplicate the indentation string if we're not going to use it.
This was found with asan.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk> Reviewed-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
diff --color-moved-ws: fix out of bounds string access
When adjusting the start of the string to take account of the change
in indentation the code was not checking that the string being
adjusted was in fact longer than the indentation change. This was
detected by asan.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk> Reviewed-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
results in a crash due to a double free. This happens when two
potential moved blocks start with consecutive lines. As
pmb_advance_or_null_multi_match() advances it copies the ws_delta from
the last matching line to the next. When the first of our consecutive
lines is advanced its ws_delta well be copied to the second,
overwriting the ws_delta of the block containing the second line. Then
when the second line is advanced it will copy the new ws_delta to the
line below it and so on. Eventually one of these blocks will stop
matching and the ws_delta will be freed. From then on the other block
is in a use-after-free state and when it stops matching it will try to
free the ws_delta that has already been freed by the other block.
The solution is to store the ws_delta in the array of potential moved
blocks rather than with the lines. This means that it no longer needs
to be copied around and one block cannot overwrite the ws_delta of
another. Additionally it saves some malloc/free calls as we don't keep
allocating and freeing ws_deltas.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk> Reviewed-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
There is no need to inline oidset_init(), as it's typically only called
twice in the lifetime of an oidset (once at the beginning and at the end
by oidset_clear()) and kh_resize_* is quite big, so move its definition
to oidset.c. Document it while we're at it.
Signed-off-by: Rene Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
tip_oids_contain() lazily loads refs into an oidset at its first call.
It abuses the internal (sub)member .map.tablesize of that oidset to
check if it has done that already.
Determine if the oidset needs to be populated upfront and then do that
instead. This duplicates a loop, but simplifies the existing one by
separating concerns between the two.
Signed-off-by: Rene Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
fetch-pack: exclude blobs when lazy-fetching trees
A partial clone with missing trees can be obtained using "git clone
--filter=tree:none <repo>". In such a repository, when a tree needs to
be lazily fetched, any tree or blob it directly or indirectly references
is fetched as well, regardless of whether the original command required
those objects, or if the local repository already had some of them.
This is because the fetch protocol, which the lazy fetch uses, does not
allow clients to request that only the wanted objects be sent, which
would be the ideal solution. This patch implements a partial solution:
specify the "blob:none" filter, somewhat reducing the fetch payload.
This change has no effect when lazily fetching blobs (due to how filters
work). And if lazily fetching a commit (such repositories are difficult
to construct and is not a use case we support very well, but it is
possible), referenced commits and trees are still fetched - only the
blobs are not fetched.
The necessary code change is done in fetch_pack() instead of somewhere
closer to where the "filter" instruction is written to the wire so that
only one part of the code needs to be changed in order for users of all
protocol versions to benefit from this optimization.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
When fetch_pack() is invoked as part of another Git command (due to a
lazy fetch from a partial clone, for example), it uses object flags that
may already be used by the outer Git command.
The commit that introduced the lazy fetch feature (88e2f9ed8e
("introduce fetch-object: fetch one promisor object", 2017-12-05)) tried
to avoid this overlap, but it did not avoid it totally. It was
successful in avoiding writing COMPLETE, but did not avoid reading
COMPLETE, and did not avoid writing and reading ALTERNATE.
Ensure that no flags are written or read by fetch_pack() in the case
where it is used to perform a lazy fetch. To do this, it is sufficient
to avoid checking completeness of wanted refs (unnecessary in the case
of lazy fetches), and to avoid negotiation-related work (in the current
implementation, already, no negotiation is performed). After that was
done, the lack of overlap was verified by checking all direct and
indirect usages of COMPLETE and ALTERNATE - that they are read or
written only if no_dependents is false.
There are other possible solutions to this issue:
(1) Split fetch-pack.{c,h} into a flag-using part and a non-flag-using
part, and whenever no_dependents is set, only use the
non-flag-using part.
(2) Make fetch_pack() be able to be used with arbitrary repository
objects. fetch_pack() should then create its own repository object
based on the given repository object, with its own object
hashtable, so that the flags do not conflict.
(1) is possible but invasive - some functions would need to be split;
and such invasiveness would potentially be unnecessary if we ever were
to need (2) anyway. (2) would be useful if we were to support, say,
submodules that were partial clones themselves, but I don't know when or
if the Git project plans to support those.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Quite some time ago, a last plea to the XP users out there who want to
see Windows XP support in Git for Windows, asking them to get engaged
and help, vanished into the depths of the universe.
We tried for a long time to play nice with the last remaining XP users
who somehow manage to build Git from source, but a recent update of
mingw-w64 (7.0.0.5233.e0c09544 -> 7.0.0.5245.edf66197) finally dropped
the last sign of XP support, and Git for Windows' SDK is no longer able
to build core Git's `master` branch as a consequence. (Git for Windows'
`master` branch already bumped the minimum Windows version to Vista a
while ago, so it is fine.)
It is time to require Windows Vista or later to build Git from source.
This, incidentally, lets us use quite a few nice new APIs.
It also means that we no longer need the inet_pton() and inet_ntop()
emulation, which is nice.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Windows Vista (and later) actually have a working poll(), but we still
cannot use it because it only works on sockets.
So let's detect when we are targeting Windows Vista and undefine those
constants, and define `pollfd` so that we can declare our own pollfd
struct.
We also need to make sure that we override those constants *after*
`winsock2.h` has been `#include`d (otherwise we would not really
override those constants).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
We added faster equality-comparison functions for hashes in 14438c4497 (introduce hasheq() and oideq(), 2018-08-28). A
few topics were in-flight at the time, and can now be
converted. This covers all spots found by "make coccicheck"
in master (the coccicheck results were tweaked by hand for
style).
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
roll wt_status_state into wt_status and populate in the collect phase
Status variables were initialized in the collect phase and some
variables were later freed in the print functions.
A "struct wt_status" used to be sufficient for the output phase to
work. It was designed to be filled in the collect phase and consumed
in the output phase, but over time some fields were added and output
phase started filling the fields.
A "struct wt_status_state" that was used in other codepaths turned out
to be useful in the "git status" output. This is not tied to "struct
wt_status", so filling in the collect phase was not consistently
followed.
Move the status state structure variables into the status state
structure and populate them in the collect functions.
Create a new function to free the buffers that were being freed in the
print function. Call this new function in commit.c where both the
collect and print functions were being called.
Based on a patch suggestion by Junio C Hamano. [1]
Recognize -r and --recursive as synonyms for --max-depth=-1 for
compatibility with GNU grep; it's still the default for git grep.
This also adds --no-recursive as synonym for --max-depth=0 for free,
which is welcome for completeness and consistency.
Fix the description for --max-depth, while we're at it -- negative
values other than -1 actually disable recursion, i.e. they are
equivalent to --max-depth=0.
Requested-by: Christoph Berg <myon@debian.org> Suggested-by: Junio C Hamano <gitster@pobox.com> Initial-patch-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Rene Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
When you type "git help" (or just "git") you are greeted with a list
with commonly used commands and their short description and are
suggested to use "git help -a" or "git help -g" for more details.
"git help -av" would be more friendly and inline with what is shown
with "git help" since it shows list of commands with description as
well, and commands are properly grouped.
"help -av" does not show everything "help -a" shows though. Add
external command section in "help -av" for this. While at there, add a
section for aliases as well (until now aliases have no UI, just "git
config").
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Reviewed-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
oidset_insert() returns 1 if the object ID is already in the set and
doesn't add it again, or 0 if it hadn't been present. Make use of that
fact instead of checking with an extra oidset_contains() call.
Signed-off-by: Rene Scharfe <l.s.r@web.de> Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
config.txt: correct the note about uploadpack.packObjectsHook
Document for uploadpack.packObjectsHook is added in [1] and consists
of two paragraphs, the second one is quite important about where this
variable can stay.
When the paragraph about uploadpack.allowFilter is added in [2], it's
added in between the two paragraphs. This makes the "this is non-repo
level config" note incorrectly apply to allowFilter instead of
packObjectsHook. Move allowFilter paragraph down to fix this.
[1] 20b20a22f8 (upload-pack: provide a hook for running pack-objects -
2016-05-18)
git doc: direct bug reporters to mailing list archive
The mailing list archive can help a user encountering a bug to tell
whether a recent regression has already been reported and whether a
longstanding bug has already had some discussion to start their
thinking.
Based-on-patch-by: Martin Ågren <martin.agren@gmail.com> Improved-by: Junio C Hamano <gitster@pobox.com> Improved-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
It makes it harder to let the API description and the reality drift
apart if the doc is kept close to the implementation or the header
of the API. We have been slowly migrating API docs out of the
Documentation/technical/api-* to *.h files, and the development
community generally considers that how inline docs in strbuf.h is
done the best current practice.
We recommend documenting in the header over documenting near the
implementation to encourage people to write the docs that are
readable without peeking at the implemention.
Helped-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>