Merge branch 'sb/submodule-helper-clone-regression-fix' into maint
A partial rewrite of "git submodule" in the 2.7 timeframe changed
the way the gitdir: pointer in the submodules point at the real
repository location to use absolute paths by accident. This has
been corrected.
* sb/submodule-helper-clone-regression-fix:
submodule--helper, module_clone: catch fprintf failure
submodule--helper: do not borrow absolute_path() result for too long
submodule--helper, module_clone: always operate on absolute paths
submodule--helper clone: create the submodule path just once
submodule--helper: fix potential NULL-dereference
recursive submodules: test for relative paths
Merge branch 'jk/branch-shortening-funny-symrefs' into maint
A change back in version 2.7 to "git branch" broke display of a
symbolic ref in a non-standard place in the refs/ hierarchy (we
expect symbolic refs to appear in refs/remotes/*/HEAD to point at
the primary branch the remote has, and as .git/HEAD to point at the
branch we locally checked out).
* jk/branch-shortening-funny-symrefs:
branch: fix shortening of non-remote symrefs
Merge branch 'es/format-patch-doc-hide-no-patch' into maint
"git format-patch --help" showed `-s` and `--no-patch` as if these
are valid options to the command. We already hide `--patch` option
from the documentation, because format-patch is about showing the
diff, and the documentation now hides these options as well.
* es/format-patch-doc-hide-no-patch:
git-format-patch.txt: don't show -s as shorthand for multiple options
When "git worktree" feature is in use, "git branch -m" renamed a
branch that is checked out in another worktree without adjusting
the HEAD symbolic ref for the worktree.
* ky/branch-m-worktree:
set_worktree_head_symref(): fix error message
branch -m: update all per-worktree HEADs
refs: add a new function set_worktree_head_symref
Merge branch 'jk/check-repository-format' into maint
The repository set-up sequence has been streamlined (the biggest
change is that there is no longer git_config_early()), so that we
do not attempt to look into refs/* when we know we do not have a
Git repository.
* jk/check-repository-format:
verify_repository_format: mark messages for translation
setup: drop repository_format_version global
setup: unify repository version callbacks
init: use setup.c's repo version verification
setup: refactor repo format reading and verification
config: drop git_config_early
check_repository_format_gently: stop using git_config_early
lazily load core.sharedrepository
wrap shared_repository global in get/set accessors
setup: document check_repository_format()
The last test added to 't5510-fetch' in 0898c9628104 (fetch: release
pack files before garbage-collecting, 2016-01-13) may sporadically
trigger following error message from the test harness:
rm: cannot remove 'trash directory.t5510-fetch/auto-gc/.git': Directory not empty
The test in question forces an auto-gc, which, if the system supports
it, runs in the background by default, and occasionally takes long
enough for the test to finish and for 'test_done' to start
housekeeping. This can lead to the test's 'git gc --auto' in the
background and 'test_done's 'rm -rf $trash' in the foreground racing
each other to create and delete files and directories. It might just
happen that 'git gc' re-creates a directory that 'rm -rf' already
visited and removed, which ultimately triggers the above error.
Disable detaching the auto-gc process to ensure that it finishes
before the test can continue, thus avoiding this racy situation.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de> Reviewed-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
A previous change introduced a call to pthread_sigmask() in order to block
SIGPIPE in a thread. Since there are no signal facilities on Windows that
are similar to POSIX signals, just ignore the request to block the signal.
In the particular case, the effect of blocking SIGPIPE on POSIX is that
write() calls return EPIPE when the reader closes the pipe. This is how
write() behaves on Windows.
Signed-off-by: Johannes Sixt <j6t@kdbg.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Merge branch 'tb/blame-force-read-cache-to-workaround-safe-crlf' into maint
When running "git blame $path" with unnormalized data in the index
for the path, the data in the working tree was blamed, even though
"git add" would not have changed what is already in the index, due
to "safe crlf" that disables the line-end conversion. It has been
corrected.
* tb/blame-force-read-cache-to-workaround-safe-crlf:
correct blame for files commited with CRLF
Merge branch 'sg/diff-multiple-identical-renames' into maint
"git diff -M" used to work better when two originally identical
files A and B got renamed to X/A and X/B by pairing A to X/A and B
to X/B, but this was broken in the 2.0 timeframe.
* sg/diff-multiple-identical-renames:
diffcore: fix iteration order of identical files during rename detection
0492eb48 (t9824: fix broken &&-chain in a subshell, 2016-04-24)
revealed a test that was broken from the beginning, as it expected a
wrong size. The expected size of the file under test is 39
bytes. The test checked that the size is 13 bytes, but this was not
noticed because it was breaking the &&-chain.
Fix the reference value to make the test pass.
Signed-off-by: Lars Schneider <larsxschneider@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Git LFS 1.2.0 removed a preamble from the output of the 'git lfs pointer'
command [1] which broke the parsing of this output. Adjust the parser
to support the old and the new format.
Please note that this patch slightly changes the second return parameter
from a list of LF terminated strings to a single string that contains
a number of LF characters.
Signed-off-by: Lars Schneider <larsxschneider@gmail.com> Helped-by: Sebastian Schuberth <sschuberth@gmail.com> Helped-by: Ben Woosley <ben.woosley@gmail.com> Signed-off-by: Lars Schneider <larsxschneider@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
travis-ci: express Linux/OS X dependency versions more clearly
The Git Travis CI OSX build always installs the latest versions of Git LFS and
Perforce via brew and the Linux build installs fixed versions. Consequently new
LFS/Perforce versions can break the OS X build even if there is no change in
Git.
Signed-off-by: Lars Schneider <larsxschneider@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
pack-objects: warn on split packs disabling bitmaps
It can be tempting for a server admin to want a stable set of
long-lived packs for dumb clients; but also want to enable bitmaps
to serve smart clients more quickly.
Unfortunately, such a configuration is impossible; so at least warn
users of this incompatibility since commit 21134714 (pack-objects:
turn off bitmaps when we split packs, 2014-10-16).
Tested the warning by inspecting the output of:
make -C t t5310-pack-bitmaps.sh GIT_TEST_OPTS=-v
Signed-off-by: Eric Wong <normalperson@yhbt.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Lots of internal functions in submodule-confic.c have a first parameter
`struct submodule_cache *cache`, which currently always refers to the
global variable `cache` in the file. To avoid confusion rename the
global `cache` variable.
Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The possible reasons for exiting are now ordered by the exit code value.
While at it, rewrite the `can not write to the config file` to
`the config file cannot be written` to be grammatically correct and a
proper sentence.
Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-p4 tests: time_in_seconds should use $PYTHON_PATH
The time_in_seconds script should use $PYTHON_PATH, rather than
just hard-coded python, so that users can override which version
gets used, as is done for other python invocations.
Signed-off-by: Luke Diamand <luke@diamand.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-p4 tests: work with python3 as well as python2
Update the git-p4 tests so that they work with both
Python2 and Python3.
We have to be explicit about the difference between
Unicode text strings (Python3 default) and raw binary
strings which will be exchanged with Perforce.
Additionally, print always takes parentheses in Python3.
Signed-off-by: Luke Diamand <luke@diamand.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
We want to tell the compiler that error_buf() uses
printf()-style arguments via the __attribute__ mechanism,
but the original commit (3a429d0), forgot the trailing "__".
This happens to work with real GNUC-compatible compilers
like gcc and clang, but confuses our fallback macro in
git-compat-util.h, which only matches the official name (and
thus the build fails on compilers like Visual Studio).
Reported-by: Philip Oakley <philipoakley@iee.org> Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
difftool/mergetool: make the form of yes/no questions consistent
Every yes/no question in difftool/mergetool scripts has slightly
different form, and none of them is consistent with the form git
itself uses.
Make the form of all the questions consistent with the form used
by git.
Reviewed-by: John Keeping <john@keeping.me.uk> Signed-off-by: Nikola Forró <nforro@redhat.com> Acked-by: David Aguilar <davvid@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Merge tag 'l10n-2.8.0-rnd3-fr' of git://github.com/git-l10n/git-po into maint
l10n-2.8.0-rnd3-fr
* tag 'l10n-2.8.0-rnd3-fr' of git://github.com/git-l10n/git-po:
l10n: fr: don't translate "merge" as a parameter
l10n: fr: change "id de clé" to match "id-clé"
l10n: fr: fix wrongly translated option name
l10n: fr: fix transcation of "dir"
When the ident attributes is set, get_stream_filter() did not obey
core.autocrlf=true, and the file was checked out with LF.
Change the rule when a streaming filter can be used:
- if an external filter is specified, don't use a stream filter.
- if the worktree eol is CRLF and "auto" is active, don't use a stream filter.
- Otherwise the stream filter can be used.
Add test cases in t0027.
Signed-off-by: Torsten Bögershausen <tboegi@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add more test cases for the not normalized files ("NNO"). The
"text" attribute is most important, use it as the first parameter.
"ident", if set, is the second paramater followed by the eol
attribute. The eol attribute overrides core.autocrlf, which
overrides core.eol.
indent is not yet used, this will be done in the next commit.
Use loops to test more combinations of attributes, like
"* text eol=crlf" or especially "*text=auto eol=crlf".
Signed-off-by: Torsten Bögershausen <tboegi@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
convert: allow core.autocrlf=input and core.eol=crlf
Even though the configuration parser errors out when core.autocrlf
is set to 'input' when core.eol is set to 'crlf', there is no need
to do so, because the core.autocrlf setting trumps core.eol.
Allow all combinations of core.crlf and core.eol and document
that core.autocrlf overrides core.eol.
Signed-off-by: Torsten Bögershausen <tboegi@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the content of a commited file is unchanged and the attributes
are changed, Git may not detect that the next commit must treat the
file as changed. This happens when lstat() doesn't detect a change,
since neither inode, mtime nor size are changed.
Add a single "Z" character to change the file size and content.
When the files are compared later in checkout_files(), the "Z" is
removed before the comparison.
Signed-off-by: Torsten Bögershausen <tboegi@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
string_list: use string-list API in unsorted_string_list_lookup()
Using the string-list API in function unsorted_string_list_lookup()
makes the code more readable.
Signed-off-by: Ralf Thielow <ralf.thielow@gmail.com> Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Merge branch 'fr_v2.8.0_r3' of git://github.com/jnavila/git into maint
* 'fr_v2.8.0_r3' of git://github.com/jnavila/git:
l10n: fr: don't translate "merge" as a parameter
l10n: fr: change "id de clé" to match "id-clé"
l10n: fr: fix wrongly translated option name
l10n: fr: fix transcation of "dir"
mmap(win32): avoid copy-on-write when it is unnecessary
Often we are mmap()ing read-only. In those cases, it is wasteful to map in
copy-on-write mode. Even worse: it can cause errors where we run out of
space in the page file.
So let's be extra careful to map files in read-only mode whenever
possible.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is not really helpful when a `git fetch` fails with the message:
fatal: mmap failed: No error
In the particular instance encountered by a colleague of yours truly,
the Win32 error code was ERROR_COMMITMENT_LIMIT which means that the
page file is not big enough.
Let's make the message
fatal: mmap failed: File too large
instead, which is only marginally better, but which can be associated
with the appropriate work-around: setting `core.packedGitWindowSize` to
a relatively small value.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Its last call site was replaced by mks_tempfile_ts() in 284098f (diff:
use tempfile module - 2015-08-12) and there's a good chance
mks_tempfile_ts will continue to successfully handle this job. Delete
it.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
It was largely replaced by fnmatch_icase_mem() and its last use was in 84b8b5d (remove match_pathspec() in favor of match_pathspec_depth() -
2013-07-14).
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
To get the 'value' from '--option=value', test-lib.sh parses said
option running 'expr' with a regexp. This involves a subshell, an
external process, and a lot of non-alphanumeric characters in the
regexp.
Use a much simpler POSIX-defined shell parameter expansion instead to
do the same.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
name-rev: include taggerdate in considering the best name
We most likely want the oldest tag that contained the commit to be
reported. So let's remember the taggerdate, and make it more important
than anything else when choosing the best name for a given commit.
Suggested by Linus Torvalds.
Note that we need to update t9903 because it tested for the old behavior
(which preferred the description "b1~1" over "tags/t2~1").
We might want to introduce a --heed-taggerdate option, and make the new
behavior dependent on that, if it turns out that some scripts rely on the
old name-rev method.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
These were added by 8bf4bec (add "ok=sigpipe" to
test_must_fail and use it to fix flaky tests, 2015-11-27)
because we would racily die via SIGPIPE when the pack was
rejected by the other side.
But since we have recently de-flaked send-pack, we should be
able to tighten up these tests (including re-adding the
expected output checks).
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
In commit 9ff18fa (fetch-pack: ignore SIGPIPE in sideband
demuxer, 2016-02-24), we started using sigchain_push() to
ignore SIGPIPE in the async demuxer thread. However, this is
rather clumsy, as it ignores SIGPIPE for the entire process,
including the main thread. At the time we didn't have any
per-thread signal support, but we now we do. Let's use it.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
If we get an error from pack-objects, we may exit
send_pack() early, before reading the server's status
response. In such a case, we may racily see SIGPIPE from our
async demuxer (which is trying to write that status back to
us), and we'd prefer to continue pushing the error up the
call stack, rather than taking down the whole process with
signal death.
This is safe to do because our demuxer just calls
recv_sideband, whose data writes are all done with
write_or_die(), which will notice SIGPIPE.
We do also write sideband 2 to stderr, and we would no
longer die on SIGPIPE there (if it were piped in the first
place, and if the piped program went away). But that's
probably a good thing, as it likewise should not abort the
push process at all (neither immediately by signal, nor
eventually by reporting failure back to the main thread).
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
run-command: teach async threads to ignore SIGPIPE
Async processes can be implemented as separate forked
processes, or as threads (depending on the NO_PTHREADS
setting). In the latter case, if an async thread gets
SIGPIPE, it takes down the whole process. This is obviously
bad if the main process was not otherwise going to die, but
even if we were going to die, it means the main process does
not have a chance to report a useful error message.
There's also the small matter that forked async processes
will not take the main process down on a signal, meaning git
will behave differently depending on the NO_PTHREADS
setting.
This patch fixes it by adding a new flag to "struct async"
to block SIGPIPE just in the async thread. In theory, this
should always be on (which makes async threads behave more
like async processes), but we would first want to make sure
that each async process we spawn is careful about checking
return codes from write() and would not spew endlessly into
a dead pipe. So let's start with it as optional, and we can
enable it for specific sites in future patches.
The natural name for this option would be "ignore_sigpipe",
since that's what it does for the threaded case. But since
that name might imply that we are ignoring it in all cases
(including the separate-process one), let's call it
"isolate_sigpipe". What we are really asking for is
isolation. I.e., not to have our main process taken down by
signals spawned by the async process. How that is
implemented is up to the run-command code.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
send-pack: close demux pipe before finishing async process
This fixes a deadlock on the client side when pushing a
large number of refs from a corrupted repo. There's a
reproduction script below, but let's start with a
human-readable explanation.
The client side of a push goes something like this:
1. Start an async process to demux sideband coming from
the server.
2. Run pack-objects to send the actual pack, and wait for
its status via finish_command().
3. If pack-objects failed, abort immediately.
4. If pack-objects succeeded, read the per-ref status from
the server, which is actually coming over a pipe from
the demux process started in step 1.
We run finish_async() to wait for and clean up the demux
process in two places. In step 3, if we see an error, we
want it to end early. And after step 4, it should be done
writing any data and we are just cleaning it up.
Let's focus on the error case first. We hand the output
descriptor to the server over to pack-objects. So by the
time it has returned an error to us, it has closed the
descriptor and the server has gotten EOF. The server will
mark all refs as failed with "unpacker error" and send us
back the status for each (followed by EOF).
This status goes to the demuxer thread, which relays it over
a pipe to the main thread. But the main thread never even
tries reading the status. It's trying to bail because of the
pack-objects error, and is waiting for the demuxer thread to
finish. If there are a small number of refs, that's OK; the
demuxer thread writes into the pipe buffer, sees EOF from
the server, and quits. But if there are a large number of
refs, it may block on write() back to the main thread,
leading to a deadlock (the main thread is waiting for the
demuxer to finish, the demuxer is waiting for the main
thread to read).
We can break this deadlock by closing the pipe between the
demuxer and the main thread before calling finish_async().
Then the demuxer gets a write() error and exits.
The non-error case usually just works, because we will have
read all of the data from the other side. We do close
demux.out already, but we only do so _after_ calling
finish_async(). This is OK because there shouldn't be any
more data coming from the server. But technically we've only
read to a flush packet, and a broken or malicious server
could be sending more cruft. In such a case, we would hit
the same deadlock. Closing the pipe first doesn't affect the
normal case, and means that for a cruft-sending server,
we'll notice a write() error rather than deadlocking.
Note that when write() sees this error, we'll actually
deliver SIGPIPE to the thread, which will take down the
whole process (unless we're compiled with NO_PTHREADS). This
isn't ideal, but it's an improvement over the status quo,
which is deadlocking. And SIGPIPE handling in async threads
is a bigger problem that we can deal with separately.
A simple reproduction for the error case is below. It's
technically racy (we could exit the main process and take
down the async thread with us before it even reads the
status), though in practice it seems to fail pretty
consistently.
git init repo &&
cd repo &&
# make some commits; we need two so we can simulate corruption
# in the history later.
git commit --allow-empty -m one &&
one=$(git rev-parse HEAD) &&
git commit --allow-empty -m two &&
two=$(git rev-parse HEAD) &&
# now make a ton of refs; our goal here is to overflow the pipe buffer
# when reporting the ref status, which will cause the demuxer to block
# on write()
for i in $(seq 20000); do
echo "create refs/heads/this-is-a-really-long-branch-name-$i $two"
done |
git update-ref --stdin &&
# now make a corruption in the history such that pack-objects will fail
rm -vf .git/objects/$(echo $one | sed 's}..}&/}') &&
# and then push the result
git init --bare dst.git &&
git push --mirror dst.git
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
i18n: builtin/pull.c: split strings marked for translation
Split string "If you wish to set tracking information
for this branch you can do so with:\n" to match occurring string in
git-parse-remote.sh. In this case, the translator handles it only once.
On the other hand, the translations of the string that were already made
are mark as fuzzy and the translator needs to correct it herself.
Signed-off-by: Vasco Almeida <vascomalmeida@sapo.pt> Signed-off-by: Junio C Hamano <gitster@pobox.com>
When directories are moved using `git mv` all files in the directory
have been just moved, but no further action was taken on them. This
was done by assigning the mode = WORKING_DIRECTORY to the files
inside a moved directory.
submodules however need to update their link to the git directory as
well as updates to the .gitmodules file. By removing the condition of
`mode != INDEX` (the remaining modes are BOTH and WORKING_DIRECTORY) for
the required submodule actions, we perform these for submodules in a
moved directory.
Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Merge branch 'jv/merge-nothing-into-void' into maint
"git merge FETCH_HEAD" dereferenced NULL pointer when merging
nothing into an unborn history (which is arguably unusual usage,
which perhaps was the reason why nobody noticed it).
* jv/merge-nothing-into-void:
merge: fix NULL pointer dereference when merging nothing into void
When "git merge --squash" stopped due to conflict, the concluding
"git commit" failed to read in the SQUASH_MSG that shows the log
messages from all the squashed commits.
* ss/commit-squash-msg:
commit: do not lose SQUASH_MSG contents
The startup_info data, which records if we are working inside a
repository (among other things), are now uniformly available to Git
subcommand implementations, and Git avoids attempting to touch
references when we are not in a repository.
* jk/startup-info:
use setup_git_directory() in test-* programs
grep: turn off gitlink detection for --no-index
mailmap: do not resolve blobs in a non-repository
remote: don't resolve HEAD in non-repository
setup: set startup_info->have_repository more reliably
setup: make startup_info available everywhere
Merge branch 'jk/rev-parse-local-env-vars' into maint
The "--local-env-vars" and "--resolve-git-dir" options of "git
rev-parse" failed to work outside a repository when the command's
option parsing was rewritten in 1.8.5 era.
* jk/rev-parse-local-env-vars:
rev-parse: let some options run outside repository
t1515: add tests for rev-parse out-of-repo helpers
"git config --get-urlmatch", unlike other variants of the "git
config --get" family, did not signal error with its exit status
when there was no matching configuration.
* jk/config-get-urlmatch:
Documentation/git-config: fix --get-all description
Documentation/git-config: use bulleted list for exit codes
config: fail if --get-urlmatch finds no value
fsck_commit_buffer(): do not special case the last validation
The pattern taken by all the validations in this function is:
if (notice a violation exists) {
err = report(... VIOLATION_KIND ...);
if (err)
return err;
}
where report() returns zero if specified kind of violation is set to
be ignored, and otherwise shows an error message and returns non-zero.
The last validation in the function immediately before the function
returns 0 to declare "all good" can cheat and directly return the
return value from report(), and the current code does so, i.e.
if (notice a violation exists)
return report(... VIOLATION_KIND ...);
return 0;
But that is a selfish code that declares it is the ultimate and
final form of the function, never to be enhanced later. To allow
and invite future enhancements, make the last test follow the same
pattern.
Remove extra + 1 from resp_len, the length of the byte sequence to be
Base64 encoded and passed to the server as the response. Or the response
incorrectly contains an extra \0.
Signed-off-by: Kazuki Yamaguchi <k@rhe.jp> Signed-off-by: Junio C Hamano <gitster@pobox.com>
imap-send: check for NOLOGIN capability only when using LOGIN command
Don't check for NOLOGIN (LOGINDISABLED) capability when imap.authMethod
is specified.
LOGINDISABLED capability doesn't forbid using AUTHENTICATE, so it should
be allowed, or we can't connect to IMAP servers which only accepts
AUTHENTICATE command.
Signed-off-by: Kazuki Yamaguchi <k@rhe.jp> Signed-off-by: Junio C Hamano <gitster@pobox.com>
i18n: builtin/rm.c: remove a comma ',' from string
Remove a comma from string marked for translation. Make the string match the
one in builtin/mv.c. Now translators have do handle this string only once.
Signed-off-by: Vasco Almeida <vascomalmeida@sapo.pt> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The test uses hardcoded #!/bin/sh to create a pre-commit hook
script. Because the generated script uses $(command substitution),
which is not supported by /bin/sh on some platforms (e.g. Solaris),
the resulting pre-commit always fails.
Which is not noticeable as the test that uses the hook is about
checking the behaviour of the command when the hook fails ;-), but
nevertheless it is not testing what we wanted to test.
Use write_script so that the resulting script is run under the same
shell our scripted Porcelain commands are run, which must support
the necessary $(construct).
Helped-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The test prepares a sample file "dir/two" with a single incomplete
line in it with "printf", and also prepares a small helper script
"diff" to create a file with a single incomplete line in it, again
with "printf". The output from the latter is compared with an
expected output, again prepared with "printf" hence lacking the
final LF. There is no reason for this test to be using files with
an incomplete line at the end, and these look more like a mistake
of not using
printf "%s\n" "string to be written"
and using
printf "string to be written"
Depending on what would be in $GIT_PREFIX, using the latter form
could be a bug waiting to happen. Correct them.
Also, the test uses hardcoded #!/bin/sh to create a small helper
script. For a small task like what the generated script does, it
does not matter too much in that what appears as /bin/sh would not
be _so_ broken, but while we are at it, use write_script instead,
which happens to make the result easier to read by reducing need
of one level of quoting.
The recent cleanup in b7cbbff switched t5532's use of
backticks to $(). This matches our normal shell style, which
is good. But it also breaks the test on Solaris, where
/bin/sh does not understand $().
Our normal shell style assumes a modern-ish shell which
knows about $(). However, some tests create small helper
scripts and just write "#!/bin/sh" into them. These scripts
either need to go back to using backticks, or they need to
respect $SHELL_PATH. The easiest way to do the latter is to
use write_script.
While we're at it, let's also stick the script creation
inside a test_expect block (our usual style), and split the
perl snippet into its own script (to prevent quoting
madness).
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
We pass off to the "_gently" form to do the real work, and
just die() if it returned an error. However, our die message
de-references "value", which may be NULL if the request was
to unset a variable. Nobody using glibc noticed, because it
simply prints "(null)", which is good enough for the test
suite (and presumably very few people run across this in
practice). But other libc implementations (like Solaris) may
segfault.
Let's not only fix that, but let's make the message more
clear about what is going on in the "unset" case.
Reported-by: "Tom G. Christensen" <tgc@jupiterrise.com> Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
git_config_set_multivar_in_file: all non-zero returns are errors
This function is just a thin wrapper for the "_gently" form
of the function. But the gently form is designed to feed
builtin/config.c, which passes our return code directly to
its exit status, and thus uses positive error values for
some cases. We check only negative values, meaning we would
fail to die in some cases (e.g., a malformed key).
This may or may not be triggerable in practice; we tend to
use this non-gentle form only when setting internal
variables, which would not have malformed keys.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>