This silently adds the ".git" directory component if needed, so you
don't need to state it explicitly for the source. Also, it turns the
source into an absolute pathname when local, so that you can use
relative pathnames without losing sight of the source when we cd into
the destination.
Teach 'git-send-pack' to send new branches and tags.
The protocol always supported it, but send-pack didn't actually know how
to tell the other side about a new branch/tag.
NOTE! You'll have to name it explicitly on the command line: if you
don't name any branches, git-send-pack will default to the branches that
already exist.
[PATCH] Use sq_quote() to properly quote the parameter to call shell.
This tries to be more lenient to the users and stricter to the
attackers by quoting the input properly for shell safety,
instead of forbidding certain characters from the input.
Things to note:
- We do not quote "prog" parameter (which comes from --exec).
The user should know what he is doing. --exec='echo foo'
will supply the first two parameters to the resulting
command, while --exec="'echo foo'" will give the first
parameter, a single string with a space inside.
- We do not care too much about leaking the sq_quote() output
just before running exec().
Signed-off-by: Junio C Hamano <junkio@cox.net> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Add "git-sh-setup-script" for common git shell script setup
It sets up the normal git environment variables and a few helper
functions (currently just "die()"), and returns ok if it all looks like
a git archive. So use it something like
. git-sh-setup-script || die "Not a git archive"
to make the rest of the git scripts more careful and readable.
I still worry about just quoting things when passing it off to "ssh" or
"sh -c", so I'm being anal. But _, ^ and , are certainly ok and while
both ~ and @ can have speacial meaning to shell/ssh they are benign.
[PATCH] Prevent t6000 series from dropping useless sed.script in t/
The Makefile in the test suite directory considers any file
matching t[0-9][0-9][0-9][0-9]-*.sh as the top-level test script
to be executed. Unfortunately this was not documented, and the
common test library, t6000-lib.sh was named to match that
pattern. This caused t6000-lib.sh to be called from Makefile as
the top-level program, causing it to leave t/sed.script file
behind. Rename it to t6000lib.sh to prevent this, and document
the naming convention a bit more clearly.
Signed-off-by: Junio C Hamano <junkio@cox.net> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
[PATCH] Short-circuit git-clone-pack while cloning locally (take 2).
When we are cloning a repository on a local filesystem, it is
faster to just create a hard linkfarm of .git/object hierarchy
and copy the .git/refs files. By default, the script uses the
clone-pack method, but it can be told with the -l flag to do the
hard linkfarm (falling back on recursive file copy) to replicate
the .git/object hierarchy.
Signed-off-by: Junio C Hamano <junkio@cox.net> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Infrastructure for git rpm builds.Adds GIT_VERSION to Makefile and new make
targets: git.spec, dist, and rpm. A simple 'make rpm' will build the rpm.
Also adds git.spec.in which is used to generate git.spec.
[PATCH] Ensure list insertion method does not depend on position of --merge-order argument
This change ensures that git-rev-list --merge-order produces the same result
irrespective of what position the --merge-order argument appears in the argument
list.
Signed-off-by: Jon Seymour <jon.seymour@gmail.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
[PATCH] Write sed script directly into temp file, rather than a variable
When sed uses \n rather than ; as a separator (for BSD sed(1) compat),
it is cleaner to use a file directly, rather than an environment
variable containing \n characters.
This change changes t/t6000 write to sed.script directly and changes
the other tests to remove knowledge of sed.script.
Signed-off-by: Jon Seymour <jon.seymour@gmail.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Make gitk use --topo-order instead of --merge-order
It's cheaper to calculate, and doesn't give different results depending
on the order of the arguments passed in (and is thus more appropriate
for something like gitk that can validly take the unordered "--all" flag
to show all branches).
The previous dup fix seems to have fixed --topo-order. Holler if you
still see problems.
git-rev-list: remove the DUPCHECK logic, use SEEN instead
That's what we should have done in the first place, since it not only
avoids another unnecessary flag, it also protects the commits from
showing up as duplicates later when they show up as parents of another
commit (in the pop_most_recent_commit() path).
[PATCH] clone-pack.c:write_one_ref() - Create leading directories.
The function write_one_ref() is passed the list of refs received
from the other end, which was obtained by directory traversal
under $GIT_DIR/refs; this can contain paths other than what
git-init-db prepares and would fail to clone when there is
such.
Signed-off-by: Junio C Hamano <junkio@cox.net> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
[PATCH] Add a topological sort procedure to commit.c
This introduces an in-place topological sort procedure to commit.c.
Given a list of commits, sort_in_topological_order() will perform an in-place
topological sort of that list.
The invariant that applies to the resulting list is:
a reachable from b => ord(b) < ord(a)
This invariant is weaker than the --merge-order invariant, but is cheaper
to calculate (assuming the list has been identified) and will serve any
purpose where only a minimal topological order guarantee is required.
Signed-off-by: Jon Seymour <jon.seymour@gmail.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
[PATCH] Change the sed seperator in t/t6000-lib.sh.
This trivial patch removes the semicolon as the sed seperator in the t/t6000-lib.sh test script
and replaces it with white space. This makes BSD sed(1) much happier.
Signed-off-by: Mark Allen <mrallen1@yahoo.com> Signed-off-by: Jon Seymour <jon.seymour@gmail.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
GIT_DIR=. ends up being what some of the pack senders use, and we
sometimes messed up when cleaning up the path, ie a ".//HEAD" was
cleaned up into "/HEAD", not "HEAD" like it should be.
We should do some other cleanup, and probably also verify that symlinks
don't point to outside the git area.
Increase the number of possible heads requested from git-upload-pack
Now that git-clone-pack exists, we actually have somebody requesting
more than just a single head in a pack. So allow the Jeff's of this
world to clone things with tens of heads.
Add a "git-show-index" helper that shows the contents of a pack index
This was invaluable for debugging the zero-sized compression issue, and
might be useful for scripting too, if people want to see the contents of
a pack.
zlib actually writes a header for that case, and while ignoring that
header will get us the right data, it will also end up messing up our
stream position. So we actually want zlib to "uncompress" even an empty
object.
git-cvsimport-script: move working directory forward
If HEAD happened to point to a cvs branch, move the
working directory forward to the tip of the branch.
Additionally, if master and "origin" are equal,
move master forward to new origin first.
Make git-fetch-pack actually do all the unpacking etc.
It returns the result SHA1 on stdout, so you can do
remote=$(git-fetch-pack host:dir branchname)
and it will unpack the objects and "remote" will be the SHA1 name of the
branch on the other side. You can then save that off, or merge it, or
whatever.
git-rev-parse: support show sha1 names for pack entries
This is actually subtly wrong. If a short match is found in the object
directory, but would _also_ match another SHA1 ID in a pack (or it shows
in one pack but not another), we'll never have done the pack lookup, and
we think it's unique.
I can't find it in myself to care. You really want to use enough of a
SHA1 that there is never any ambiguity.
Make the name of a pack-file depend on the objects packed there-in.
This means that the .git/objects/pack directory is also rsync'able,
since the filenames created there-in are either unique or refer to the
same data.
Otherwise you might not be able to pull from a directory that is partly
packed without having to worry about missing objects due to pack-file
name clashes.
In particular, check that it's a symlink, and points to refs/heads/. We
depend on that these days not only for "git checkout", but also because
fsck and others only check for references in the .git/refs/
subdirectory, not things like HEAD itself.