"git grep" learned the "--column" option that gives not just the
line number but the column number of the hit.
* tb/grep-column:
contrib/git-jump/git-jump: jump to exact location
grep.c: add configuration variables to show matched option
builtin/grep.c: add '--column' option to 'git-grep(1)'
grep.c: display column number of first match
grep.[ch]: extend grep_opt to allow showing matched column
grep.c: expose {,inverted} match column in match_line()
Documentation/config.txt: camel-case lineNumber for consistency
"git submodule" did not correctly adjust core.worktree setting that
indicates whether/where a submodule repository has its associated
working tree across various state transitions, which has been
corrected.
* sb/submodule-core-worktree:
submodule deinit: unset core.worktree
submodule: ensure core.worktree is set after update
submodule: unset core.worktree if no working tree is present
gpg-interface: do not hardcode the key string len anymore
gnupg does print the keyid followed by a space and the signer comes
next. The same pattern is also used in gpgsm, but there the key length
would be 40 instead of 16. Instead of hardcoding the expected length,
find the first space and calculate it.
Input that does not match the expected format will be ignored now,
before we jumped to found+17 which might have been behind the end of an
unexpected string.
Signed-off-by: Henning Schild <henning.schild@siemens.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
gpg-interface: introduce an abstraction for multiple gpg formats
Create a struct that holds the format details for the supported formats.
At the moment that is still just "openpgp". This commit prepares for the
introduction of more formats, that might use other programs and match
other signatures.
Signed-off-by: Henning Schild <henning.schild@siemens.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a struct repository argument to the functions in commit-graph.h that
read the commit graph. (This commit does not affect functions that write
commit graphs.)
Because the commit graph functions can now read the commit graph of any
repository, the global variable core_commit_graph has been removed.
Instead, the config option core.commitGraph is now read on the first
time in a repository that a commit is attempted to be parsed using its
commit graph.
This commit includes a test that exercises the functionality on an
arbitrary repository that is not the_repository.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of storing commit graphs in static variables, store them in
struct object_store. There are no changes to the signatures of existing
functions - they all still only support the_repository, and support for
other instances of struct repository will be added in a subsequent
commit.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Two functions in the code (1) check if the repository is configured for
commit graphs, (2) call prepare_commit_graph(), and (3) check if the
graph exists. Move (1) and (3) into prepare_commit_graph(), reducing
duplication of code.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use oid_object_info_extended() to get object info instead of
read_object_file().
It will help to handle some requests faster (e.g., we do not need to
parse whole object if we need to know %(objectsize)).
It could also help us to add new atoms such as %(objectsize:disk)
and %(deltabase).
Signed-off-by: Olga Telezhnaia <olyatelezhnaya@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Atoms like "align" or "end" do not have string representation.
Earlier we had to go and parse whole object with a hope that we
could fill their string representations. It's easier to fill them
with an empty string before we start to work with whole object.
It is important to mention that we fill only these atoms that must
contain nothing. So, if we could not fill the atom because, for example,
the object is missing, we leave it with NULL.
Signed-off-by: Olga Telezhnaia <olyatelezhnaya@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add the source of object data to prevent parsing of unneeded data.
The goal is to improve performance by avoiding calling expensive
functions when we don't need the information they provide
or when we could get it by using a cheaper function.
It is stored in valid_atoms because it depends on the atoms we are
interested in.
Signed-off-by: Olga Telezhnaia <olyatelezhnaya@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
gpg-interface: add new config to select how to sign a commit
Add "gpg.format" where the user can specify which type of signature to
use for commits. At the moment only "openpgp" is supported and the value is
not even used. This commit prepares for a new types of signatures.
Signed-off-by: Henning Schild <henning.schild@siemens.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
diff.c: factor advance_or_nullify out of mark_color_as_moved
This moves the part of code that checks if we're still in a block
into its own function. We'll need a different approach on advancing
the blocks in a later patch, so having it as a separate function will
prove useful.
While at it rename the variable `p` to `prev` to indicate that it refers
to the previous line. This is as pmb[i] was assigned in the last iteration
of the outmost for loop.
Further rename `pnext` to `cur` to indicate that this should match up with
the current line of the outmost for loop.
Also replace the advancement of pmb[i] to reuse `cur` instead of
using `p->next` (which is how the name for pnext could be explained.
Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
diff.c: decouple white space treatment from move detection algorithm
In the original implementation of the move detection logic the choice for
ignoring white space changes is the same for the move detection as it is
for the regular diff. Some cases came up where different treatment would
have been nice.
Allow the user to specify that white space should be ignored differently
during detection of moved lines than during generation of added and removed
lines. This is done by providing analogs to the --ignore-space-at-eol,
-b, and -w options by introducing the option --color-moved-ws=<modes>
with the modes named "ignore-space-at-eol", "ignore-space-change" and
"ignore-all-space", which is used only during the move detection phase.
As we change the default, we'll adjust the tests.
For now we do not infer any options to treat white spaces in the move
detection from the generic white space options given to diff.
This can be tuned later to reasonable default.
As we plan on adding more white space related options in a later patch,
that interferes with the current white space options, use a flag field
and clamp it down to XDF_WHITESPACE_FLAGS, as that (a) allows to easily
check at parse time if we give invalid combinations and (b) can reuse
parts of this patch.
By having the white space treatment in its own option, we'll also
make it easier for a later patch to have an config option for
spaces in the move detection.
Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
diff.c: add a blocks mode for moved code detection
The new "blocks" mode provides a middle ground between plain and zebra.
It is as intuitive (few colors) as plain, but still has the requirement
for a minimum of lines/characters to count a block as moved.
Suggested-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
(https://public-inbox.org/git/87o9j0uljo.fsf@evledraar.gmail.com/) Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
diff.c: do not pass diff options as keydata to hashmap
When we initialize the hashmap, we give it a pointer to the
diff_options, which it then passes along to each call of the
hashmap_cmp_fn function. There's no need to pass it a second time as
the "keydata" parameter, and our comparison functions never look at
keydata.
This was a mistake left over from an earlier round of 2e2d5ac184
(diff.c: color moved lines differently, 2017-06-30), before hashmap
learned to pass the data pointer for us.
Explanation-by: Jeff King <peff@peff.net> Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
git diff [<options, related to color>] |
grep -v "index" |
test_decode_color >actual &&
to produce output that we want to test against. This pattern was introduced
in 86b452e2769 (diff.c: add dimming to moved line detection, 2017-06-30)
as then the focus on getting the colors right. However the pattern used
is not best practice as we do care about the exit code of Git. So let's
not have Git as the upstream of a pipe. Piping the output of grep to
some function is fine as we assume grep to be un-flawed in our test suite.
Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
gc: do not return error for prior errors in daemonized mode
Some build machines started consistently failing to fetch updated
source using "repo sync", with error
error: The last gc run reported the following. Please correct the root cause
and remove /build/.repo/projects/tools/git.git/gc.log.
Automatic cleanup will not be performed until the file is removed.
warning: There are too many unreachable loose objects; run 'git prune' to remove them.
The cause takes some time to describe.
In v2.0.0-rc0~145^2 (gc: config option for running --auto in
background, 2014-02-08), "git gc --auto" learned to run in the
background instead of blocking the invoking command. In this mode, it
closed stderr to avoid interleaving output with any subsequent
commands, causing warnings like the above to be swallowed; v2.6.3~24^2
(gc: save log from daemonized gc --auto and print it next time,
2015-09-19) addressed that by storing any diagnostic output in
.git/gc.log and allowing the next "git gc --auto" run to print it.
To avoid wasteful repeated fruitless gcs, when gc.log is present, the
subsequent "gc --auto" would die after printing its contents. Most
git commands, such as "git fetch", ignore the exit status from "git gc
--auto" so all is well at this point: the user gets to see the error
message, and the fetch succeeds, without a wasteful additional attempt
at an automatic gc.
External tools like repo[1], though, do care about the exit status
from "git gc --auto". In non-daemonized mode, the exit status is
straightforward: if there is an error, it is nonzero, but after a
warning like the above, the status is zero. The daemonized mode, as a
side effect of the other properties provided, offers a very strange
exit code convention:
- if no housekeeping was required, the exit status is 0
- the first real run, after forking into the background, returns exit
status 0 unconditionally. The parent process has no way to know
whether gc will succeed.
- if there is any diagnostic output in gc.log, subsequent runs return
a nonzero exit status to indicate that gc was not triggered.
There's nothing for the calling program to act on on the basis of that
error. Use status 0 consistently instead, to indicate that we decided
not to run a gc (just like if no housekeeping was required). This
way, repo and similar tools can get the benefit of the same behavior
as tools like "git fetch" that ignore the exit status from gc --auto.
Once the period of time described by gc.pruneExpire elapses, the
unreachable loose objects will be removed by "git gc --auto"
automatically.
Reported-by: Andrii Dehtiarov <adehtiarov@google.com> Helped-by: Jeff King <peff@peff.net> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
A value of -1 returned from cmd_gc gets propagated to exit(),
resulting in an exit status of 255. Use die instead for a clearer
error message and a controlled exit.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
- use an error message in lower case, following the usual style
- quote filenames in error messages to make them easier to read and to
decrease translation load by matching other 'stat' error messages
- check for and report errors from 'read', too
- avoid being confused by a gc.log larger than INT_MAX bytes
Noticed by code inspection.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
t/chainlint: add chainlint "specialized" test cases
The --chain-lint option uses heuristics and knowledge of shell syntax to
detect broken &&-chains in subshells by pure textual inspection. The
heuristics handle a range of stylistic variations in existing tests
(evolved over the years), however, they are still best-guesses. As such,
it is possible for future changes to accidentally break assumptions upon
which the heuristics are based. Protect against this possibility by
adding tests which check the linter itself for correctness.
In addition to protecting against regressions, these tests help document
(for humans) expected behavior, which is important since the linter's
implementation language ('sed') does not necessarily lend itself to easy
comprehension.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The --chain-lint option uses heuristics and knowledge of shell syntax to
detect broken &&-chains in subshells by pure textual inspection. The
heuristics handle a range of stylistic variations in existing tests
(evolved over the years), however, they are still best-guesses. As such,
it is possible for future changes to accidentally break assumptions upon
which the heuristics are based. Protect against this possibility by
adding tests which check the linter itself for correctness.
In addition to protecting against regressions, these tests help document
(for humans) expected behavior, which is important since the linter's
implementation language ('sed') does not necessarily lend itself to easy
comprehension.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The --chain-lint option uses heuristics and knowledge of shell syntax to
detect broken &&-chains in subshells by pure textual inspection. The
heuristics handle a range of stylistic variations in existing tests
(evolved over the years), however, they are still best-guesses. As such,
it is possible for future changes to accidentally break assumptions upon
which the heuristics are based. Protect against this possibility by
adding tests which check the linter itself for correctness.
In addition to protecting against regressions, these tests help document
(for humans) expected behavior, which is important since the linter's
implementation language ('sed') does not necessarily lend itself to easy
comprehension.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
t/chainlint: add chainlint "loop" and "conditional" test cases
The --chain-lint option uses heuristics and knowledge of shell syntax to
detect broken &&-chains in subshells by pure textual inspection. The
heuristics handle a range of stylistic variations in existing tests
(evolved over the years), however, they are still best-guesses. As such,
it is possible for future changes to accidentally break assumptions upon
which the heuristics are based. Protect against this possibility by
adding tests which check the linter itself for correctness.
In addition to protecting against regressions, these tests help document
(for humans) expected behavior, which is important since the linter's
implementation language ('sed') does not necessarily lend itself to easy
comprehension.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
t/chainlint: add chainlint "nested subshell" test cases
The --chain-lint option uses heuristics and knowledge of shell syntax to
detect broken &&-chains in subshells by pure textual inspection. The
heuristics handle a range of stylistic variations in existing tests
(evolved over the years), however, they are still best-guesses. As such,
it is possible for future changes to accidentally break assumptions upon
which the heuristics are based. Protect against this possibility by
adding tests which check the linter itself for correctness.
In addition to protecting against regressions, these tests help document
(for humans) expected behavior, which is important since the linter's
implementation language ('sed') does not necessarily lend itself to easy
comprehension.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The --chain-lint option uses heuristics and knowledge of shell syntax to
detect broken &&-chains in subshells by pure textual inspection. The
heuristics handle a range of stylistic variations in existing tests
(evolved over the years), however, they are still best-guesses. As such,
it is possible for future changes to accidentally break assumptions upon
which the heuristics are based. Protect against this possibility by
adding tests which check the linter itself for correctness.
In addition to protecting against regressions, these tests help document
(for humans) expected behavior, which is important since the linter's
implementation language ('sed') does not necessarily lend itself to easy
comprehension.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
t/chainlint: add chainlint "whitespace" test cases
The --chain-lint option uses heuristics and knowledge of shell syntax to
detect broken &&-chains in subshells by pure textual inspection. The
heuristics handle a range of stylistic variations in existing tests
(evolved over the years), however, they are still best-guesses. As such,
it is possible for future changes to accidentally break assumptions upon
which the heuristics are based. Protect against this possibility by
adding tests which check the linter itself for correctness.
In addition to protecting against regressions, these tests help document
(for humans) expected behavior, which is important since the linter's
implementation language ('sed') does not necessarily lend itself to easy
comprehension.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The --chain-lint option uses heuristics and knowledge of shell syntax to
detect broken &&-chains in subshells by pure textual inspection. The
heuristics handle a range of stylistic variations in existing tests
(evolved over the years), however, they are still best-guesses. As such,
it is possible for future changes to accidentally break assumptions upon
which the heuristics are based. Protect against this possibility by
adding tests which check the linter itself for correctness.
In addition to protecting against regressions, these tests help document
(for humans) expected behavior, which is important since the linter's
implementation language ('sed') does not necessarily lend itself to easy
comprehension.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
t/Makefile: add machinery to check correctness of chainlint.sed
The --chain-lint option uses heuristics and knowledge of shell syntax to
detect broken &&-chains in subshells by pure textual inspection.
Although the heuristics work well, they are still best-guesses and
future changes could accidentally break assumptions upon which they are
based. To protect against this possibility, tests checking correctness
of the linter itself will be added. As preparation, add a new makefile
"check-chainlint" target and associated machinery.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
t/test-lib: teach --chain-lint to detect broken &&-chains in subshells
The --chain-lint option detects broken &&-chains by forcing the test to
exit early (as the very first step) with a sentinel value. If that
sentinel is the test's overall exit code, then the &&-chain is intact;
if not, then the chain is broken. Unfortunately, this detection does not
extend to &&-chains within subshells even when the subshell itself is
properly linked into the outer &&-chain.
Address this shortcoming by feeding the body of the test to a
lightweight "linter" which can peer inside subshells and identify broken
&&-chains by pure textual inspection. Although the linter does not
actually parse shell scripts, it has enough knowledge of shell syntax to
reliably deal with formatting style variations (as evolved over the
years) and to avoid being fooled by non-shell content (such as inside
here-docs and multi-line strings). It recognizes modern subshell
formatting:
Heuristics are employed to properly identify the extent of a subshell
formatted in the old-style since a number of legitimate constructs may
superficially appear to close the subshell even though they don't. For
example, it understands that neither "x=$(command)" nor "case $x in *)"
end a subshell, despite the ")" at the end of line.
Due to limitations of the tool used ('sed') and its inherent
line-by-line processing, only subshells one level deep are handled, as
well as one-liner subshells one level below that. Subshells deeper than
that or multi-line subshells at level two are passed through as-is, thus
&&-chains in their bodies are not checked.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
One-shot environment variable assignments, such as 'FOO' in
"FOO=bar cmd", exist only during the invocation of 'cmd'. However, if
'cmd' happens to be a shell function, then 'FOO' is assigned in the
executing shell itself, and that assignment remains until the process
exits (unless explicitly unset). Since this side-effect of
"FOO=bar shell_func" is unlikely to be intentional, detect and report
such usage.
To distinguish shell functions from other commands, perform a pre-scan
of shell scripts named as input, gleaning a list of function names by
recognizing lines of the form (loosely matching whitespace):
shell_func () {
and later report suspect lines of the form (loosely matching quoted
values):
FOO=bar [BAR=foo ...] shell_func
Also take care to stitch together incomplete lines (those ending with
"\") since suspect invocations may be split over multiple lines:
FOO=bar BAR=foo \
shell_func
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The line of failed shell text, usually coming from within a test body,
is often indented by one or two TABs, with the result that the actual
(important) text is separated from <explanation> by a good deal of empty
space. This can make for a difficult read, especially on typical
80-column terminals.
Make the messages more compact and perhaps a bit easier to digest by
folding out the leading whitespace from <failed-shell-text>.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Many problem explanations ask the reader to "please" use a suggested
alternative, however, such politeness is unnecessary and just adds to
the noise and length of the line, so drop "please" to make the message a
bit more concise.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
t6046/t9833: fix use of "VAR=VAL cmd" with a shell function
Unlike "FOO=bar cmd" one-shot environment variable assignments
which exist only for the invocation of 'cmd', those assigned by
"FOO=bar shell_func" exist within the running shell and continue to
do so until the process exits (or are explicitly unset). It is
unlikely that this behavior was intended by the test author.
In these particular tests, the "FOO=bar shell_func" invocations are
already in subshells, so the assignments don't last too long, don't
appear to harm subsequent commands in the same subshells, and don't
affect other tests in the same scripts, however, the usage is
nevertheless misleading and poor practice, so fix the tests to assign
and export the environment variables in the usual fashion.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce a new negotiation algorithm used during fetch that skips
commits in an effort to find common ancestors faster. The skips grow
similarly to the Fibonacci sequence as the commit walk proceeds further
away from the tips. The skips may cause unnecessary commits to be
included in the packfile, but the negotiation step typically ends more
quickly.
Usage of this algorithm is guarded behind the configuration flag
fetch.negotiationAlgorithm.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
t9814: simplify convoluted check that command correctly errors out
This test uses a convoluted method to verify that "p4 help" errors
out when asked for help about an unknown command. In doing so, it
intentionally breaks the &&-chain. Simplify by employing the typical
"! command" idiom and a normal &&-chain instead.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
This test has been dysfunctional since it was added by 6489660b4b
(send-email: support validate hook, 2017-05-12), however, the problem
went unnoticed due to a broken &&-chain late in the test.
The test wants to verify that a non-zero exit code from the
'sendemail-validate' hook causes git-send-email to abort with a
particular error message. A command which is expected to fail should be
run with 'test_must_fail', however, the test neglects to do so.
Fix this problem, as well as the broken &&-chain behind which the
problem hid.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
t7810: use test_expect_code() instead of hand-rolled comparison
This test manually checks the exit code of git-grep for a particular
value. In doing so, it intentionally breaks the &&-chain. Modernize the
test by taking advantage of test_expect_code() and a normal &&-chain.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
t7400: fix broken "submodule add/reconfigure --force" test
This test has been dysfunctional since it was added by 619acfc78c
(submodule add: extend force flag to add existing repos, 2016-10-06),
however, two problems early in the test went unnoticed due to a broken
&&-chain later in the test.
First, it tries configuring the submodule with repository "bogus-url",
however, "git submodule add" insists that the repository be either an
absolute URL or a relative pathname requiring prefix "./" or "../" (this
is true even with --force), but "bogus-url" does not meet those
criteria, thus the command fails.
Second, it then tries configuring a submodule with a path which is
.gitignore'd, which is disallowed. This restriction can be overridden
with --force, but the test neglects to use that option.
Fix both problems, as well as the broken &&-chain behind which they hid.
Reviewed-by: Stefan Beller <sbeller@google.com> Signed-off-by: Eric Sunshine <sunshine@sunshineco.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use GIT_MAX_HEXSZ instead of GIT_SHA1_HEXSZ for an allocation so that it
is sufficiently large. Switch a comparison to use the_hash_algo to
determine the length of a hex object ID.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert several uses of GIT_SHA1_HEXSZ into references to the_hash_algo.
Switch other uses into a use of parse_oid_hex and uses of its computed
pointer.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
cache: update object ID functions for the_hash_algo
Most of our code has been converted to use struct object_id for object
IDs. However, there are some places that still have not, and there are
a variety of places that compare equivalently sized hashes that are not
object IDs. All of these hashes are artifacts of the internal hash
algorithm in use, and when we switch to NewHash for object storage, all
of these uses will also switch.
Update the hashcpy, hashclr, and hashcmp functions to use the_hash_algo,
since they are used in a variety of places to copy and manipulate
buffers that need to move data into or out of struct object_id. This
has the effect of making the corresponding oid* functions use
the_hash_algo as well.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
It looks like most paths in the output in the git codebase are wrapped
in single quotes. Standardize on that in rerere as well.
Apart from being more consistent, this also makes some of the strings
match strings that are already translated in other parts of the
codebase, thus reducing the work for translators, when the strings are
marked for translation in a subsequent commit.
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Documentation/CodingGuidelines mentions that error messages should be
lowercase. Prior to marking them for translation follow that pattern
in rerere as well, so translators won't have to translate messages
that don't conform to our guidelines.
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
rerere: unify error messages when read_cache fails
We have multiple different variants of the error message we show to
the user if 'read_cache' fails. The "Could not read index" variant we
are using in 'rerere.c' is currently not used anywhere in translated
form.
As a subsequent commit will mark all output that comes from 'rerere.c'
for translation, make the life of the translators a little bit easier
by using a string that is used elsewhere, and marked for translation
there, and thus most likely already translated.
"index file corrupt" seems to be the most common error message we show
when 'read_cache' fails, so use that here as well.
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Our color buffers are all COLOR_MAXLEN, which fits the
largest possible color. So we can never overflow the buffer
by copying an existing color. However, using strcpy() makes
it harder to audit the code-base for calls that _are_
problems. We should use something like xsnprintf(), which
shows the reader that we expect this never to fail (and
provides a run-time assertion if it does, just in case).
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add "struct json_writer" and a series of jw_ routines to compose JSON
data into a string buffer. The resulting string may then be printed by
commands wanting to support a JSON-like output format.
The json_writer is limited to correctly formatting structured data for
output. It does not attempt to build an object model of the JSON data.
We say "JSON-like" because we do not enforce the Unicode (usually UTF-8)
requirement on string fields. Internally, Git does not necessarily have
Unicode/UTF-8 data for most fields, so it is currently unclear the best
way to enforce that requirement. For example, on Linux pathnames can
contain arbitrary 8-bit character data, so a command like "status" would
not know how to encode the reported pathnames. We may want to revisit
this (or double encode such strings) in the future.
Helped-by: Eric Sunshine <sunshine@sunshineco.com> Helped-by: René Scharfe <l.s.r@web.de> Helped-by: Wink Saville <wink@saville.com> Helped-by: Ramsay Jones <ramsay@ramsayjones.plus.com> Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
deref_tag() prints a warning if the object that a tag refers to does not
exist. However, when a partial clone has an annotated tag from its
promisor remote, but not the object that it refers to, printing a
warning on such a tag is incorrect.
This occurs, for example, when the checkout that happens after a partial
clone causes some objects to be fetched - and as part of the fetch, all
local refs are read. The test included in this patch demonstrates this
situation.
Therefore, do not print a warning in this case.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
In handle_commit(), it is fatal for an annotated tag to point to a
non-existent object. --exclude-promisor-objects should relax this rule
and allow non-existent objects that are promisor objects, but this is
not the case. Update handle_commit() to tolerate this situation.
This was observed when cloning from a repository with an annotated tag
pointing to a blob. The test included in this patch demonstrates this
case.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
sequencer: pass absolute GIT_WORK_TREE to exec commands
The sequencer currently passes GIT_DIR, but not GIT_WORK_TREE, to exec
commands. In that configuration, we assume that whatever directory
we're in is the top level of the work tree, and git rev-parse
--show-toplevel responds accordingly. However, when we're in a
subdirectory, that isn't correct: we respond with the subdirectory as
the top level, resulting in unexpected behavior.
Ensure that we pass GIT_WORK_TREE as well as GIT_DIR so that git
operations within subdirectories work correctly.
Note that we are guaranteed to have a work tree in this case: the
relevant sequencer functions are called only from revert, cherry-pick,
and rebase--helper; all of these commands require a working tree.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>