Submodules: Add the "fetchRecurseSubmodules" config option
The new boolean "fetchRecurseSubmodules" config option controls the
behavior for "git fetch" and "git pull". It specifies if these commands
should recurse into submodules and fetch new commits there too and can be
set separately for each submodule.
In the .gitmodules file "submodule.<name>.fetchRecurseSubmodules" entries
are read before looking for them in .git/config. Thus settings found in
.git/config will override those from .gitmodules, thereby allowing the
user to ignore settings given by the remote side while also letting
upstream set reasonable defaults for those users who don't have special
needs.
This configuration can be overridden by the command line option
"--[no-]recurse-submodules" of "git fetch" and "git pull".
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
This new boolean option can be used to override the default for "git
fetch" and "git pull", which is to not recurse into populated submodules
and fetch all new commits there too.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Until now you had to call "git submodule update" (without -N|--no-fetch
option) or something like "git submodule foreach git fetch" to fetch
new commits in populated submodules from their remote.
This could lead to "(commits not present)" messages in the output of
"git diff --submodule" (which is used by "git gui" and "gitk") after
fetching or pulling new commits in the superproject and is an obstacle for
implementing recursive checkout of submodules. Also "git submodule
update" cannot fetch changes when disconnected, so it was very easy to
forget to fetch the submodule changes before disconnecting only to
discover later that they are needed.
This patch adds the "--recurse-submodules" option to recursively fetch
each populated submodule from the url configured in the .git/config of the
submodule at the end of each "git fetch" or during "git pull" in the
superproject. The submodule paths are taken from the index.
The hidden option "--submodule-prefix" is added to "git fetch" to be able
to print out the full paths of nested submodules.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
When objectname:short was introduced, it forgot to copy the result of
find_unique_abbrev. Because the result of find_unique_abbrev is a
pointer to static buffer, this resulted in the same value being
substituted in for each ref.
Signed-off-by: Jay Soffian <jaysoffian@gmail.com> Acked-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
tree-walk: Correct bitrotted comment about tree_entry()
There was a code comment that referred to the "above two functions" but
over time the functions immediately preceding the comment have changed.
Just mention the relevant functions by name.
Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
We start the pager too early for several git commands, which results in
the errors sometimes going to the pager rather than show up as errors.
This is often hidden by the fact that we pass in '-X' to less by default,
which causes 'less' to exit for small output, but if you do
export LESS=-S
you can then clearly see the problem by doing
git log --prretty
which shows the error message ("fatal: unrecognized argument: --prretty")
being sent to the pager.
This happens for pretty much all git commands that use USE_PAGER, and then
check arguments separately. But "git diff" does it too early too (even
though it does an explicit setup_pager() call)
This only fixes it for the trivial "git log" family case.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Here "takes no argument" means "does not take an argument". The
latter phrasing might make it clearer that PARSE_OPT_NOARG does not
make an option with an argument that can optionally be left off.
Noticed-by: Ramkumar Ramachandra <artagnon@gmail.com> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The time_notes script, which uses POSIX shell features, is
currently sometimes run with a non-POSIX /bin/sh.
Reported-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* mm/rebase-i-exec:
git-rebase--interactive.sh: use printf instead of echo to print commit message
git-rebase--interactive.sh: rework skip_unnecessary_picks
test-lib: user-friendly alternatives to test [-d|-f|-e]
rebase -i: add exec command to launch a shell command
* mm/shortopt-detached:
log: parse separate option for --glob
log: parse separate options like git log --grep foo
diff: parse separate options --stat-width n, --stat-name-width n
diff: split off a function for --stat-* option parsing
diff: parse separate options like -S foo
* nd/fix-sparse-checkout:
unpack-trees: mark new entries skip-worktree appropriately
unpack-trees: do not check for conflict entries too early
unpack-trees: let read-tree -u remove index entries outside sparse area
unpack-trees: only clear CE_UPDATE|CE_REMOVE when skip-worktree is always set
t1011 (sparse checkout): style nitpicks
* hv/submodule-find-ff-merge:
Implement automatic fast-forward merge for submodules
setup_revisions(): Allow walking history in a submodule
Teach ref iteration module about submodules
* dg/local-mod-error-messages:
t7609: test merge and checkout error messages
unpack_trees: group error messages by type
merge-recursive: distinguish "removed" and "overwritten" messages
merge-recursive: porcelain messages for checkout
Turn unpack_trees_options.msgs into an array + enum
Merge branch 'jc/maint-follow-rename-fix' into maint
* jc/maint-follow-rename-fix:
log: test for regression introduced in v1.7.2-rc0~103^2~2
diff --follow: do call diffcore_std() as necessary
diff --follow: do not waste cycles while recursing
* jn/maint-plug-leak:
write-tree: Avoid leak when index refers to an invalid object
read-tree: stop leaking tree objects
core: Stop leaking ondisk_cache_entrys
Merge branch 'bc/use-more-hardlinks-in-install' into maint
* bc/use-more-hardlinks-in-install:
Makefile: make hard/symbolic links for non-builtins too
Makefile: link builtins residing in bin directory to main git binary too
* tr/rfc-reset-doc:
Documentation/reset: move "undo permanently" example behind "make topic"
Documentation/reset: reorder examples to match description
Documentation/reset: promote 'examples' one section up
Documentation/reset: separate options by mode
Documentation/git-reset: reorder modes for soft-mixed-hard progression
builtin/checkout: Fix message when switching to an existing branch
Fix "Switched to a new branch <name>" to read "Switched to branch
<name>" when <name> corresponds to an existing branch. This bug was
introduced in 02ac983 while introducing the `-B` switch.
Cc: Tay Ray Chuan <rctay89@gmail.com> Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Out-of-memory errors can either be actual lack of memory, or bugs (like
code trying to call xmalloc(-1) by mistake). A little more information
may help tracking bugs reported by users.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/maint-follow-rename-fix:
log: test for regression introduced in v1.7.2-rc0~103^2~2
diff --follow: do call diffcore_std() as necessary
diff --follow: do not waste cycles while recursing
* cc/find-commit-subject:
blame: use find_commit_subject() instead of custom code
merge-recursive: use find_commit_subject() instead of custom code
bisect: use find_commit_subject() instead of custom code
revert: rename variables related to subject in get_message()
revert: refactor code to find commit subject in find_commit_subject()
revert: fix off by one read when searching the end of a commit subject
* jn/maint-plug-leak:
write-tree: Avoid leak when index refers to an invalid object
read-tree: stop leaking tree objects
core: Stop leaking ondisk_cache_entrys
* jl/submodule-ignore-diff:
Add tests for the diff.ignoreSubmodules config option
Add the 'diff.ignoreSubmodules' config setting
Submodules: Use "ignore" settings from .gitmodules too for diff and status
Submodules: Add the new "ignore" config option for diff and status
* tc/checkout-B:
builtin/checkout: handle -B from detached HEAD correctly
builtin/checkout: learn -B
builtin/checkout: reword hint for -b
add tests for checkout -b
When mergetool is run without path limiters it loops
over each entry in 'git ls-files -u'. This includes
autoresolved paths.
Teach mergetool to only merge files listed in 'rerere status'
when rerere is enabled.
There are some subtle but harmless changes in behavior.
We now call cd_to_toplevel when no paths are given.
We do this because 'rerere status' paths are always relative
to the root. This is beneficial for the non-rerere use as
well in that mergetool now runs against all unmerged files
regardless of the current directory.
This also slightly tweaks the output when run without paths
to be more readable.
The old output:
Merging the files: foo
bar
baz
The new output:
Merging:
foo
bar
baz
Signed-off-by: David Aguilar <davvid@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
log: test for regression introduced in v1.7.2-rc0~103^2~2
Add a regression test for the git log -M --follow $diff_option bug
introduced in v1.7.2-rc0~103^2~2, $diff_option being diff related
options like -p, --stat, --name-only etc.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently git-svn assumes that two tags created from the same
revision will have the same repo url, so it uses a ref to the
tag without checking that its url matches the current url.
This causes issues when fetching an svn repo where a tag was
created, deleted, and then recreated under the following
circumstances:
- Both tags were copied from the same revision.
- Both tags had the same name.
- Both tags had different repository paths.
- [Optional] Both tags have a file with the same name but
different content.
When all four conditions are met, a checksum mismatch error
occurs because the content of two files with the same path
differs (see t/t9155--git-svn-fetch-deleted-tag.sh):
When only the first three conditions are met, no error occurs
but the tag in git matches the first (deleted) tag instead of
the last (most recent) tag (see
t/t9156-git-svn-fetch-deleted-tag-2.sh).
The fix is to verify that the repo url for the ref matches the
current url. If the urls do not match, then a "tail" is grown
on the tag name by appending a dash and rechecking the new ref's
repo url until either a matching repo url is found or a new tag
is created.
Signed-off-by: David D. Kilzer <ddkilzer@kilzer.net> Acked-by: Eric Wong <normalperson@yhbt.net>
Fix a regular expression used to remove the revision from the
end of an svn tag or branch name. The regex did not account for
any "tail" (dashes) that may have been added to the end of the
tag name (which first appeared in v1.4.1-rc2~11). If not fixed,
tags with names like "tags/mytag@5--@2" may be created.
Signed-off-by: David D. Kilzer <ddkilzer@kilzer.net> Acked-by: Eric Wong <normalperson@yhbt.net>
git-rebase--interactive.sh: use printf instead of echo to print commit message
Replace the echo statements that operate on $rest with printf's to restore
what was lost from 938791cd. This avoids any mangling that XSI-conformant
echo's may introduce.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit cd035b1c introduced the exec command to interactive rebase. In
doing so, it modified the way that skip_unnecessary_picks iterates through
the list of rebase commands so that it avoided collapsing multiple spaces
into a single space. This is necessary for example if the argument to the
exec command contains a path with multiple spaces in it.
The way it did this was by reading each line of rebase commands into a
single variable, and then breaking the individual components out using
echo, sed, and cut. It used the individual broken-out components for
decision making, and was still able to write the original line to the
output file from the variable it had saved it in. But, since we only
really need to look at anything other than the first element of the line
when a 'pick' command is encountered, and even that is only necessary when
we are still searching for "unnecessary" picks, and since newer rebase
commands like 'exec' may not even require a sha1 field, let's make our read
statement parse its input into a "command" variable, and a "rest" variable,
and then only break out the sha1 from $rest, and call git-rev-parse, when
absolutely necessary.
I think this future proofs this subroutine, avoids calling git-rev-parse
unnecessarily, and possibly with bogus arguments, and still accomplishes
the goal of not mangling the $rest of the rebase command.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil> Signed-off-by: Junio C Hamano <gitster@pobox.com>
diff --follow: do call diffcore_std() as necessary
Usually, diff frontends populate the output queue with filepairs without
any rename information and call diffcore_std() to sort the renames out.
When --follow is in effect, however, diff-tree family of frontend has a
hack that looks like this:
diff-tree frontend
-> diff_tree_sha1()
. populate diff_queued_diff
. if --follow is in effect and there is only one change that
creates the target path, then
-> try_to_follow_renames()
-> diff_tree_sha1() with no pathspec but with -C
-> diffcore_std() to find renames
. if rename is found, tweak diff_queued_diff and put a
single filepair that records the found rename there
-> diffcore_std()
. tweak elements on diff_queued_diff by
- rename detection
- path ordering
- pickaxe filtering
We need to skip parts of the second call to diffcore_std() that is related
to rename detection, and do so only when try_to_follow_renames() did find
a rename. Earlier 1da6175 (Make diffcore_std only can run once before a
diff_flush, 2010-05-06) tried to deal with this issue incorrectly; it
unconditionally disabled any second call to diffcore_std().
diff --follow: do not waste cycles while recursing
The "--follow" logic is called from diff_tree_sha1() function, but the
input trees to diff_tree_sha1() are not necessarily the top-level trees
(compare_tree_entry() calls it while it recursively descends into
subtrees). When a newly created path lives in somewhere deep in the
source hierarchy, e.g. "platform/", but the rename source is in a totally
different place in the destination hierarchy, e.g. "lang-api/src/com/...",
running "try_to_find_renames()" while base is set to "platform/" is a
wasted call.
We only need to run the rename following at the very top level.
Signed-off-by: Junio C Hamano <gitster@pobox.com> Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
perl/Makefile: Unset INSTALL_BASE when making perl.mak
PREFIX and INSTALL_BASE are mutually exclusive. If both are supplied
by INSTALL_BASE being set in PERL_MM_OPT ExtUtils::MakeMaker will
produce an error:
$ echo $PERL_MM_OPT
INSTALL_BASE=/home/avar/perl5
$ make -C perl PERL_PATH='/usr/bin/perl' prefix='/home/avar' perl.mak
make: Entering directory `/home/avar/g/git/perl'
/usr/bin/perl Makefile.PL PREFIX='/home/avar'
Only one of PREFIX or INSTALL_BASE can be given. Not both.
make: *** [perl.mak] Error 255
make: Leaving directory `/home/avar/g/git/perl'
Change the perl Makefile to work around this by explicitly unsetting
INSTALL_BASE.
INSTALL_BASE is set in PERL_MM_OPT by e.g. the popular local::lib
package, from its documentation:
This resulted in patches from $merge_head..$cur_branch being applied, as
long as they did not already exist in $cur_branch..$merge_head.
Unfortunately, when upstream is rebased, $merge_head..$cur_branch also
refers to "old" commits that have already been rebased upstream, meaning
that many patches that were already fixed upstream would be reapplied.
This could result in many spurious conflicts, as well as reintroduce
patches that were intentionally dropped upstream.
So the algorithm was changed in c85c792 (pull --rebase: be cleverer with
rebased upstream branches, 2008-01-26) and d44e712 (pull: support rebased
upstream + fetch + pull --rebase, 2009-07-19). Defining $old_remote_ref to
be the most recent entry in the reflog for @{upstream} that is an ancestor
of $cur_branch, pull --rebase was changed to run
The whole point of this change was to reduce the number of commits being
reapplied, by avoiding commits that upstream already has or had.
In the rebased upstream case, this change achieved that purpose. It is
worth noting, though, that since $old_remote_ref is always an ancestor of
$cur_branch (by its definition), format-patch will not know what upstream
is and thus will not be able to determine if any patches are already
upstream; they will all be reapplied.
In the non-rebased upstream case, this new form is usually the same as the
original code but in some cases $old_remote_ref can be an ancestor of
$(git merge-base $merge_head $cur_branch)
meaning that instead of avoiding reapplying commits that upstream already
has, it actually includes more such commits. Combined with the fact that
format-patch can no longer detect commits that are already upstream (since
it is no longer told what upstream is), results in lots of confusion for
users (e.g. "git is giving me lots of conflicts in stuff I didn't even
change since my last push.")
Cases where additional commits could be reapplied include forking from a
commit other than the tracking branch, or amending/rebasing after pushing.
Cases where the inability to detect upstreamed commits cause problems
include independent discovery of a fix and having your patches get
upstreamed by some alternative route (e.g. pulling your changes to a third
machine, pushing from there, and then going back to your original machine
and trying to pull --rebase).
Fix the non-rebased upstream case by ignoring $old_remote_ref whenever it
is contained in $(git merge-base $merge_head $cur_branch). This should
have no affect on the rebased upstream case.
Acked-by: Santi Béjar <santi@agolina.net> Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* bc/use-more-hardlinks-in-install:
Makefile: make hard/symbolic links for non-builtins too
Makefile: link builtins residing in bin directory to main git binary too
* tr/rfc-reset-doc:
Documentation/reset: move "undo permanently" example behind "make topic"
Documentation/reset: reorder examples to match description
Documentation/reset: promote 'examples' one section up
Documentation/reset: separate options by mode
Documentation/git-reset: reorder modes for soft-mixed-hard progression
* maint:
push: mention "git pull" in error message for non-fast forwards
Standardize do { ... } while (0) style
t/t7003: replace \t with literal tab in sed expression
index-pack: Don't follow replace refs.
push: mention "git pull" in error message for non-fast forwards
The message remains fuzzy to include "git pull", "git pull --rebase" and
others, but directs the user to the simplest solution in the vast
majority of cases.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr> Signed-off-by: Junio C Hamano <gitster@pobox.com>
t/t7003: replace \t with literal tab in sed expression
The sed utilities on IRIX and Solaris do not interpret the sequence '\t'
to mean a tab character; they read a literal character 't'. So, use a
literal tab instead.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Without this, attempting to index a pack containing objects that have been
replaced results in a fatal error that looks like:
fatal: SHA1 COLLISION FOUND WITH <replaced-object> !
Signed-off-by: Nelson Elhage <nelhage@ksplice.com> Acked-by: Christian Couder <chriscool@tuxfamily.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some firewalls restrict HTTP connections based on the clients user agent. This
commit provides the user the ability to modify the user agent string via either
a new config option (http.useragent) or by an environment variable
(GIT_HTTP_USER_AGENT).
Relevant documentation is added to Documentation/config.txt.
Signed-off-by: Spencer E. Olson <olsonse@umich.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
post-receive-email: remove spurious commas in email subject
fast-import: export correctly marks larger than 2^20-1
t/lib-git-svn.sh: use $PERL_PATH for perl, not perl from $PATH
diff: strip extra "/" when stripping prefix
fast-import: export correctly marks larger than 2^20-1
dump_marks_helper() has a bug when dumping marks larger than 2^20-1,
i.e., when the sparse array has more than two levels. The bug was
that the 'base' counter was being shifted by 20 bits at level 3, and
then again by 10 bits at level 2, rather than a total shift of 20 bits
in this argument to the recursive call:
(base + k) << m->shift
There are two ways to fix this correctly, the elegant:
(base + k) << 10
and the one I chose due to edit distance:
base + (k << m->shift)
Signed-off-by: Raja R Harinath <harinath@hurrynot.org> Acked-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
t/lib-git-svn.sh: use $PERL_PATH for perl, not perl from $PATH
Change the git-svn tests to use $PERL_PATH, not the "perl" in $PATH.
Using perl in $PATH was added by Sam Vilain in v1.6.6-rc0~95^2~3,
Philippe Bruhat introduced $PERL_PATH to the test suite in
v1.6.6-rc0~9^2, but the lib-git-svn.sh tests weren't updated to use
the new convention.
This resulted in the git-svn tests always being skipped on my
system. My /usr/bin/perl has access to SVN::Core and SVN::Repos, but
the perl in my $PATH does not.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
When an error is encountered, it calls add_rejected_file() which either
- directly displays the error message and stops if in plumbing mode
(i.e. if show_all_errors is not initialized at 1)
- or stores it so that it will be displayed at the end with display_error_msgs(),
Storing the files by error type permits to have a list of files for
which there is the same error instead of having a serie of almost
identical errors.
As each bind_overlap error combines a file and an old file, a list cannot be
done, therefore, theses errors are not stored but directly displayed.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr> Signed-off-by: Junio C Hamano <gitster@pobox.com>
merge-recursive: distinguish "removed" and "overwritten" messages
To limit the number of possible error messages, the error messages for
the case would_lose_untracked_file and would_lose_orphaned in
unpack_trees_options.msgs were handled with a single string,
parameterized by an action string ("overwritten" or "removed").
Instead, we consider them as two different cases, with unparameterized
string. This will make it easier to make separate lists sorted by error
types later.
Only the bind_overlap case still takes two %s parameters, but that's
unavoidable.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr> Signed-off-by: Junio C Hamano <gitster@pobox.com>
A porcelain message was first added in checkout.c in the commit 8ccba008 (Junio C Hamano, Sat May 17 21:03:49 2008, unpack-trees:
allow Porcelain to give different error messages) to give better feedback
in the case of merge errors.
This patch adapts the porcelain messages for the case of checkout
instead. This way, when having a checkout error, "merge" no longer
appears in the error message.
While we're there, we add an advice in the case of
would_lose_untracked_file.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Turn unpack_trees_options.msgs into an array + enum
The list of error messages was introduced as a structure, but an array
indexed over an enum is more flexible, since it allows one to store a
type of error message (index in the array) in a variable.
This change needs to rename would_lose_untracked ->
would_lose_untracked_file to avoid a clash with the function
would_lose_untracked in merge-recursive.c.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr> Signed-off-by: Junio C Hamano <gitster@pobox.com>
rebase -i: add exec command to launch a shell command
The typical usage pattern would be to run a test (or simply a compilation
command) at given points in history.
The shell command is ran (from the worktree root), and the rebase is
stopped when the command fails, to give the user an opportunity to fix
the problem before continuing with "git rebase --continue".
This needs a little rework of skip_unnecessary_picks, which wasn't robust
enough to deal with lines like
exec >"file name with many spaces"
in the todolist. The new version extracts command, sha1 and rest from
each line, but outputs the line itself verbatim to avoid changing the
whitespace layout.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr> Signed-off-by: Junio C Hamano <gitster@pobox.com>