The oidset API was built on top of the oidmap API which in turn is
on the hashmap API. Replace the implementation to build on top of
the khash API and gain performance.
* rs/oidset-on-khash:
oidset: uninline oidset_init()
oidset: use khash
khash: factor out kh_release_*
fetch-pack: load tip_oids eagerly iff needed
fetch-pack: factor out is_unmatched_ref()
Unlike "grep", "git grep" by default recurses to the whole tree.
The command learned "git grep --recursive" option, so that "git
grep --no-recursive" can serve as a synonym to setting the
max-depth to 0.
"git help -a" and "git help -av" give different pieces of
information, and generally the "verbose" version is more friendly
to the new users. "git help -a" by default now uses the more
verbose output (with "--no-verbose", you can go back to the
original). Also "git help -av" now lists aliases and external
commands, which it did not used to.
* nd/help-commands-verbose-by-default:
help -a: improve and make --verbose default
"git fetch $repo $object" in a partial clone did not correctly
fetch the asked-for object that is referenced by an object in
promisor packfile, which has been fixed.
* jt/fetch-tips-in-partial-clone:
fetch: in partial clone, check presence of targets
connected: document connectivity in partial clones
A new extension to the index file has been introduced, which allows
the file to be read in parallel.
* bp/read-cache-parallel:
read-cache: load cache entries on worker threads
ieot: add Index Entry Offset Table (IEOT) extension
read-cache: load cache extensions on a worker thread
config: add new index.threads config setting
eoie: add End of Index Entry (EOIE) extension
read-cache: clean up casting and byte decoding
read-cache.c: optimize reading index format v4
Some environment variables that control the runtime options of Git
used during tests are getting renamed for consistency.
* bp/rename-test-env-var:
t0000: do not get self-test disrupted by environment warnings
preload-index: update GIT_FORCE_PRELOAD_TEST support
read-cache: update TEST_GIT_INDEX_VERSION support
fsmonitor: update GIT_TEST_FSMONITOR support
preload-index: use git_env_bool() not getenv() for customization
t/README: correct spelling of "uncommon"
Code clean-up in the internal machinery used by "git status" and
"git commit --dry-run".
* ss/wt-status-committable:
roll wt_status_state into wt_status and populate in the collect phase
wt-status.c: set the committable flag in the collect phase
t7501: add test of "commit --dry-run --short"
wt-status: rename commitable to committable
wt-status.c: move has_unmerged earlier in the file
The minimum version of Windows supported by Windows port fo Git is
now set to Vista.
* js/mingw-wants-vista-or-above:
mingw: bump the minimum Windows version to Vista
mingw: set _WIN32_WINNT explicitly for Git for Windows
compat/poll: prepare for targeting Windows Vista
* ma/commit-graph-docs:
Doc: refer to the "commit-graph file" with dash
git-commit-graph.txt: refer to "*commit*-graph file"
git-commit-graph.txt: typeset more in monospace
git-commit-graph.txt: fix bullet lists
The code in "git status" sometimes hit an assertion failure. This
was caused by a structure that was reused without cleaning the data
used for the first run, which has been corrected.
* en/status-multiple-renames-to-the-same-target-fix:
commit: fix erroneous BUG, 'multiple renames on the same target? how?'
"gc --auto" ended up calling exit(-1) upon error, which has been
corrected to use exit(1). Also the error reporting behaviour when
daemonized has been updated to exit with zero status when stopping
due to a previously discovered error (which implies there is no
point running gc to improve the situation); we used to exit with
failure in such a case.
* jn/gc-auto:
gc: do not return error for prior errors in daemonized mode
* fe/doc-updates:
git-describe.1: clarify that "human readable" is also git-readable
git-column.1: clarify initial description, provide examples
git-archimport.1: specify what kind of Arch we're talking about
* en/merge-cleanup:
merge-recursive: rename merge_file_1() and merge_content()
merge-recursive: remove final remaining caller of merge_file_one()
merge-recursive: avoid wrapper function when unnecessary and wasteful
merge-recursive: set paths correctly when three-way merging content
An alias that expands to another alias has so far been forbidden,
but now it is allowed to create such an alias.
* ts/alias-of-alias:
t0014: introduce an alias testing suite
alias: show the call history when an alias is looping
alias: add support for aliases of an alias
The recently introduced commit-graph auxiliary data is incompatible
with mechanisms such as replace & grafts that "breaks" immutable
nature of the object reference relationship. Disable optimizations
based on its use (and updating existing commit-graph) when these
incompatible features are in use in the repository.
* ds/commit-graph-with-grafts:
commit-graph: close_commit_graph before shallow walk
commit-graph: not compatible with uninitialized repo
commit-graph: not compatible with grafts
commit-graph: not compatible with replace objects
test-repository: properly init repo
commit-graph: update design document
refs.c: upgrade for_each_replace_ref to be a each_repo_ref_fn callback
refs.c: migrate internal ref iteration to pass thru repository argument
Generation of (experimental) commit-graph files have so far been
fairly silent, even though it takes noticeable amount of time in a
meaningfully large repository. The users will now see progress
output.
This patch helps address the CPU cost of loading the index by utilizing
the Index Entry Offset Table (IEOT) to divide loading and conversion of
the cache entries across multiple threads in parallel.
I used p0002-read-cache.sh to generate some performance data:
Test w/100,000 files reduced the time by 32.24%
Test w/1,000,000 files reduced the time by -4.77%
Note that on the 1,000,000 files case, multi-threading the cache entry parsing
does not yield a performance win. This is because the cost to parse the
index extensions in this repo, far outweigh the cost of loading the cache
entries.
The high cost of parsing the index extensions is driven by the cache tree
and the untracked cache extensions. As this is currently the longest pole,
any reduction in this time will reduce the overall index load times so is
worth further investigation in another patch series.
Signed-off-by: Ben Peart <benpeart@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
ieot: add Index Entry Offset Table (IEOT) extension
This patch enables addressing the CPU cost of loading the index by adding
additional data to the index that will allow us to efficiently multi-
thread the loading and conversion of cache entries.
It accomplishes this by adding an (optional) index extension that is a
table of offsets to blocks of cache entries in the index file. To make
this work for V4 indexes, when writing the cache entries, it periodically
"resets" the prefix-compression by encoding the current entry as if the
path name for the previous entry is completely different and saves the
offset of that entry in the IEOT. Basically, with V4 indexes, it
generates offsets into blocks of prefix-compressed entries.
Signed-off-by: Ben Peart <benpeart@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
read-cache: load cache extensions on a worker thread
This patch helps address the CPU cost of loading the index by loading
the cache extensions on a worker thread in parallel with loading the cache
entries.
In some cases, loading the extensions takes longer than loading the
cache entries so this patch utilizes the new EOIE to start the thread to
load the extensions before loading all the cache entries in parallel.
This is possible because the current extensions don't access the cache
entries in the index_state structure so are OK that they don't all exist
yet.
The CACHE_EXT_TREE, CACHE_EXT_RESOLVE_UNDO, and CACHE_EXT_UNTRACKED
extensions don't even get a pointer to the index so don't have access to the
cache entries.
CACHE_EXT_LINK only uses the index_state to initialize the split index.
CACHE_EXT_FSMONITOR only uses the index_state to save the fsmonitor last
update and dirty flags.
I used p0002-read-cache.sh to generate some performance data:
Test w/100,000 files reduced the time by 0.53%
Test w/1,000,000 files reduced the time by 27.78%
Signed-off-by: Ben Peart <benpeart@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add support for a new index.threads config setting which will be used to
control the threading code in do_read_index(). A value of 0 will tell the
index code to automatically determine the correct number of threads to use.
A value of 1 will make the code single threaded. A value greater than 1
will set the maximum number of threads to use.
For testing purposes, this setting can be overwritten by setting the
GIT_TEST_INDEX_THREADS=<n> environment variable to a value greater than 0.
Signed-off-by: Ben Peart <benpeart@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The End of Index Entry (EOIE) is used to locate the end of the variable
length index entries and the beginning of the extensions. Code can take
advantage of this to quickly locate the index extensions without having
to parse through all of the index entries.
The EOIE extension is always written out to the index file including to
the shared index when using the split index feature. Because it is always
written out, the SHA checksums in t/t1700-split-index.sh were updated
to reflect its inclusion.
It is written as an optional extension to ensure compatibility with other
git implementations that do not yet support it. It is always written out
to ensure it is available as often as possible to speed up index operations.
Because it must be able to be loaded before the variable length cache
entries and other index extensions, this extension must be written last.
The signature for this extension is { 'E', 'O', 'I', 'E' }.
The extension consists of:
- 32-bit offset to the end of the index entries
- 160-bit SHA-1 over the extension types and their sizes (but not
their contents). E.g. if we have "TREE" extension that is N-bytes
long, "REUC" extension that is M-bytes long, followed by "EOIE",
then the hash would be:
SHA-1("TREE" + <binary representation of N> +
"REUC" + <binary representation of M>)
Signed-off-by: Ben Peart <benpeart@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update fsck.skipList implementation and documentation.
* ab/fsck-skiplist:
fsck: support comments & empty lines in skipList
fsck: use oidset instead of oid_array for skipList
fsck: use strbuf_getline() to read skiplist file
fsck: add a performance test for skipList
fsck: add a performance test
fsck: document that skipList input must be unabbreviated
fsck: document and test commented & empty line skipList input
fsck: document and test sorted skipList input
fsck tests: add a test for no skipList input
fsck tests: setup of bogus commit object
Various tests have been updated to make it easier to swap the
hash function used for object identification.
* bc/hash-independent-tests:
t5318: use test_oid for HASH_LEN
t1407: make hash size independent
t1406: make hash-size independent
t1405: make hash size independent
t1400: switch hard-coded object ID to variable
t1006: make hash size independent
t0064: make hash size independent
t0002: abstract away SHA-1 specific constants
t0000: update tests for SHA-256
t0000: use hash translation table
t: add test functions to translate hash-related values
* nd/test-tool:
Makefile: add a hint about TEST_BUILTINS_OBJS
t/helper: merge test-dump-fsmonitor into test-tool
t/helper: merge test-parse-options into test-tool
t/helper: merge test-pkt-line into test-tool
t/helper: merge test-dump-untracked-cache into test-tool
t/helper: keep test-tool command list sorted
Split Documentation/config.txt for easier maintenance.
* nd/config-split:
config.txt: move submodule part out to a separate file
config.txt: move sequence.editor out of "core" part
config.txt: move sendemail part out to a separate file
config.txt: move receive part out to a separate file
config.txt: move push part out to a separate file
config.txt: move pull part out to a separate file
config.txt: move gui part out to a separate file
config.txt: move gitcvs part out to a separate file
config.txt: move format part out to a separate file
config.txt: move fetch part out to a separate file
config.txt: follow camelCase naming
The sample code calls `get_revision()' followed by `graph_update()',
but the documentation and source code indicate that `get_revision()'
already calls `graph_update()' for you.
Signed-off-by: Michael Witten <mfwitten@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is a common mistake to put positional arguments before flags when
invoking git-rev-list. Order the positional arguments last.
This patch skips git-rev-list invocations which include the --not flag,
since the ordering of flags and positional arguments affects the
behavior. This patch also skips invocations of git-rev-list that occur
in command substitution in which the exit code is discarded, since
fixing those properly will require a more involved cleanup.
Signed-off-by: Matthew DeVore <matvore@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
'git ... | foo' will mask any errors or crashes in git, so split up such
pipes in this file.
One testcase uses several separate pipe sequences in a row which are
awkward to split up. Wrap the split-up pipe in a function so the
awkwardness is not repeated. Also change that testcase's surrounding
quotes from double to single to avoid premature string interpolation.
Signed-off-by: Matthew DeVore <matvore@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some pipes in tests lose the exit code of git processes, which can mask
unexpected behavior like crashes. Split these pipes up so that git
commands are only at the end of pipes rather than the beginning or
middle.
The violations fixed in this patch were found in the process of fixing
pipe placement in a prior patch.
Signed-off-by: Matthew DeVore <matvore@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of using a line-continuation and pipe on the second line, take
advantage of the shell's implicit line continuation after a pipe
character. So for example, instead of
some long line \
| next line
use
some long line |
next line
And add a blank line before and after the pipe where it aids readability
(it usually does).
This better matches the coding style documented in
Documentation/CodingGuidelines and used in shell scripts elsewhere in
the tree.
Signed-off-by: Matthew DeVore <matvore@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The list of Don'ts for test writing has grown large such that it is hard
to see at a glance which section an item is in. In other words, if I
ignore a little bit of surrounding context, the "don'ts" look like
"do's."
To make the list more readable, prefix "Don't" in front of every first
sentence in the items.
Also, the "Keep in mind" list is out of place and awkward, because it
was a very short "list" beneath two very long ones, and it seemed easy
to miss under the list of "don'ts," and it only had one item. So move
this item to the list of "do's" and phrase as "Remember..."
Signed-off-by: Matthew DeVore <matvore@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Free the hashmap items as well as the hashmap itself. This was found
with asan.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk> Reviewed-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is obvious in retrospect, it was found with asan.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk> Reviewed-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Don't duplicate the indentation string if we're not going to use it.
This was found with asan.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk> Reviewed-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
diff --color-moved-ws: fix out of bounds string access
When adjusting the start of the string to take account of the change
in indentation the code was not checking that the string being
adjusted was in fact longer than the indentation change. This was
detected by asan.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk> Reviewed-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
results in a crash due to a double free. This happens when two
potential moved blocks start with consecutive lines. As
pmb_advance_or_null_multi_match() advances it copies the ws_delta from
the last matching line to the next. When the first of our consecutive
lines is advanced its ws_delta well be copied to the second,
overwriting the ws_delta of the block containing the second line. Then
when the second line is advanced it will copy the new ws_delta to the
line below it and so on. Eventually one of these blocks will stop
matching and the ws_delta will be freed. From then on the other block
is in a use-after-free state and when it stops matching it will try to
free the ws_delta that has already been freed by the other block.
The solution is to store the ws_delta in the array of potential moved
blocks rather than with the lines. This means that it no longer needs
to be copied around and one block cannot overwrite the ws_delta of
another. Additionally it saves some malloc/free calls as we don't keep
allocating and freeing ws_deltas.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk> Reviewed-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
There is no need to inline oidset_init(), as it's typically only called
twice in the lifetime of an oidset (once at the beginning and at the end
by oidset_clear()) and kh_resize_* is quite big, so move its definition
to oidset.c. Document it while we're at it.
Signed-off-by: Rene Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
tip_oids_contain() lazily loads refs into an oidset at its first call.
It abuses the internal (sub)member .map.tablesize of that oidset to
check if it has done that already.
Determine if the oidset needs to be populated upfront and then do that
instead. This duplicates a loop, but simplifies the existing one by
separating concerns between the two.
Signed-off-by: Rene Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Quite some time ago, a last plea to the XP users out there who want to
see Windows XP support in Git for Windows, asking them to get engaged
and help, vanished into the depths of the universe.
We tried for a long time to play nice with the last remaining XP users
who somehow manage to build Git from source, but a recent update of
mingw-w64 (7.0.0.5233.e0c09544 -> 7.0.0.5245.edf66197) finally dropped
the last sign of XP support, and Git for Windows' SDK is no longer able
to build core Git's `master` branch as a consequence. (Git for Windows'
`master` branch already bumped the minimum Windows version to Vista a
while ago, so it is fine.)
It is time to require Windows Vista or later to build Git from source.
This, incidentally, lets us use quite a few nice new APIs.
It also means that we no longer need the inet_pton() and inet_ntop()
emulation, which is nice.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Windows Vista (and later) actually have a working poll(), but we still
cannot use it because it only works on sockets.
So let's detect when we are targeting Windows Vista and undefine those
constants, and define `pollfd` so that we can declare our own pollfd
struct.
We also need to make sure that we override those constants *after*
`winsock2.h` has been `#include`d (otherwise we would not really
override those constants).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
We added faster equality-comparison functions for hashes in 14438c4497 (introduce hasheq() and oideq(), 2018-08-28). A
few topics were in-flight at the time, and can now be
converted. This covers all spots found by "make coccicheck"
in master (the coccicheck results were tweaked by hand for
style).
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
roll wt_status_state into wt_status and populate in the collect phase
Status variables were initialized in the collect phase and some
variables were later freed in the print functions.
A "struct wt_status" used to be sufficient for the output phase to
work. It was designed to be filled in the collect phase and consumed
in the output phase, but over time some fields were added and output
phase started filling the fields.
A "struct wt_status_state" that was used in other codepaths turned out
to be useful in the "git status" output. This is not tied to "struct
wt_status", so filling in the collect phase was not consistently
followed.
Move the status state structure variables into the status state
structure and populate them in the collect functions.
Create a new function to free the buffers that were being freed in the
print function. Call this new function in commit.c where both the
collect and print functions were being called.
Based on a patch suggestion by Junio C Hamano. [1]
Recognize -r and --recursive as synonyms for --max-depth=-1 for
compatibility with GNU grep; it's still the default for git grep.
This also adds --no-recursive as synonym for --max-depth=0 for free,
which is welcome for completeness and consistency.
Fix the description for --max-depth, while we're at it -- negative
values other than -1 actually disable recursion, i.e. they are
equivalent to --max-depth=0.
Requested-by: Christoph Berg <myon@debian.org> Suggested-by: Junio C Hamano <gitster@pobox.com> Initial-patch-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Rene Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
When you type "git help" (or just "git") you are greeted with a list
with commonly used commands and their short description and are
suggested to use "git help -a" or "git help -g" for more details.
"git help -av" would be more friendly and inline with what is shown
with "git help" since it shows list of commands with description as
well, and commands are properly grouped.
"help -av" does not show everything "help -a" shows though. Add
external command section in "help -av" for this. While at there, add a
section for aliases as well (until now aliases have no UI, just "git
config").
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Reviewed-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
oidset_insert() returns 1 if the object ID is already in the set and
doesn't add it again, or 0 if it hadn't been present. Make use of that
fact instead of checking with an extra oidset_contains() call.
Signed-off-by: Rene Scharfe <l.s.r@web.de> Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
config.txt: correct the note about uploadpack.packObjectsHook
Document for uploadpack.packObjectsHook is added in [1] and consists
of two paragraphs, the second one is quite important about where this
variable can stay.
When the paragraph about uploadpack.allowFilter is added in [2], it's
added in between the two paragraphs. This makes the "this is non-repo
level config" note incorrectly apply to allowFilter instead of
packObjectsHook. Move allowFilter paragraph down to fix this.
[1] 20b20a22f8 (upload-pack: provide a hook for running pack-objects -
2016-05-18)
git doc: direct bug reporters to mailing list archive
The mailing list archive can help a user encountering a bug to tell
whether a recent regression has already been reported and whether a
longstanding bug has already had some discussion to start their
thinking.
Based-on-patch-by: Martin Ågren <martin.agren@gmail.com> Improved-by: Junio C Hamano <gitster@pobox.com> Improved-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
It makes it harder to let the API description and the reality drift
apart if the doc is kept close to the implementation or the header
of the API. We have been slowly migrating API docs out of the
Documentation/technical/api-* to *.h files, and the development
community generally considers that how inline docs in strbuf.h is
done the best current practice.
We recommend documenting in the header over documenting near the
implementation to encourage people to write the docs that are
readable without peeking at the implemention.
Helped-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
rev-parse: --show-superproject-working-tree should work during a merge
Invoking 'git rev-parse --show-superproject-working-tree' exits with
"fatal: BUG: returned path string doesn't match cwd?"
when the superproject has an unmerged entry for the current submodule,
instead of displaying the superproject's working tree.
The problem is due to the fact that when a merge of the submodule reference
is in progress, "git ls-files --stage —full-name <submodule-relative-path>”
returns three seperate entries for the submodule (one for each stage) rather
than a single entry; e.g.,
The code in get_superproject_working_tree() expected exactly one entry to
be returned; this patch makes it use the first entry if multiple entries
are returned.
Test t1500-rev-parse is extended to cover this case.
Signed-off-by: Sam McKelvie <sammck@gmail.com> Reviewed-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
t1400: drop debug `echo` to actually execute `test`
Instead of running `test "foo" = "$(bar)"`, we prefix the whole thing
with `echo`. Comparing to nearby tests makes it clear that this is just
debug leftover. This line has actually been modified four times since it
was introduced in e52290428b (General ref log reading improvements.,
2006-05-19) and the `echo` has always survived. Let's finally drop it.
This script could need some more cleanups. This is just an immediate fix
so that we actually test what we intend to.
All other hits for `git grep "\<echo test " -- t/` seem fine. They want
to create some input or expected output data.
Signed-off-by: Martin Ågren <martin.agren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
t0000: do not get self-test disrupted by environment warnings
The test framework test-lib.sh itself would want to give warnings
and hints, e.g. when it sees a deprecated environment variable is in
use that we want to encourage users to migrate to another variable.
The self-test of test framework done in t0000 however do not expect
to see these warnings and hints, so depending on the settings of
environment variables, a running test may or may not produce these
messages to the standard error output, breaking the expectations of
self-test test framework does on itself. Here is what we see:
$ TEST_GIT_INDEX_VERSION=4 sh t0000-basic.sh -i -v
...
'err' is not empty, it contains:
warning: TEST_GIT_INDEX_VERSION is now GIT_TEST_INDEX_VERSION
hint: set GIT_TEST_INDEX_VERSION too during the transition period
not ok 5 - pretend we have a fully passing test suite
The following quick attempt to work it around does not work, because
some tests in t0000 do want to see expected errors from the test
framework itself.
# Point to the t/test-lib.sh, which isn't in ../ as usual
- . "\$TEST_DIRECTORY"/test-lib.sh
+ . "\$TEST_DIRECTORY"/test-lib.sh >/dev/null 2>&1
EOF
cat >>"$name.sh" &&
chmod +x "$name.sh" &&
There are a few possible ways to work this around:
* We could strip the warning: and hint: unconditionally from the
error output before the error messages are checked in the
self-test (helper functions check_sub_test_lib_test_err and
check_sub_test_lib_test); the problem with this approach is that
it will make it impossible to write self-tests to ensure that
right warnings and hints are given.
* We could force a sane environment settings before the test helper
_run_sub_test_lib_test_common dot-sources test-lib.sh; the
problem with this approach is that _run_sub_test_lib_test_common
now needs to be aware of what pairs of environment variables are
checked in test-lib.sh using check_var_migration helper.
The final patch I came up with is probably the solution that is
least bad. Set a variable to tell test-lib.sh that we are running
a self-test, so that various pieces in test-lib.sh can react to keep
the output stable.
preload-index: update GIT_FORCE_PRELOAD_TEST support
Rename GIT_FORCE_PRELOAD_TEST to GIT_TEST_PRELOAD_INDEX for consistency with
the other GIT_TEST_ special setups and properly document its use.
Add logic in t/test-lib.sh to give a warning when the old variable is set to
let people know they need to update their environment to use the new
variable.
Signed-off-by: Ben Peart <Ben.Peart@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rename TEST_GIT_INDEX_VERSION to GIT_TEST_INDEX_VERSION for consistency with
the other GIT_TEST_ special setups and properly document its use.
Add logic in t/test-lib.sh to give a warning when the old variable is set to
let people know they need to update their environment to use the new
variable.
Signed-off-by: Ben Peart <Ben.Peart@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rename GIT_FSMONITOR_TEST to GIT_TEST_FSMONITOR for consistency with the
other GIT_TEST_ special setups and properly document its use.
Add logic in t/test-lib.sh to give a warning when the old variable is set to
let people know they need to update their environment to use the new
variable.
Remove the outdated instructions on how to run the test suite utilizing
fsmonitor now that it is properly documented in t/README.
Signed-off-by: Ben Peart <Ben.Peart@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The file processed by `git commit-graph` is referred to as the
"commit-graph file", also with a dash. We have a few references to the
"commit graph file", though, without the dash. These occur in
git-commit-graph.txt as well as in Doc/technical/commit-graph.txt. Fix
them.
Do not change the references to the "commit graph" (without "... file")
as a data structure.
Signed-off-by: Martin Ågren <martin.agren@gmail.com> Reviewed-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-commit-graph.txt: refer to "*commit*-graph file"
This document sometimes refers to the "commit-graph file" as just "the
graph file". This saves a couple of words here and there at the risk of
confusion. In particular, the documentation for `git commit-graph read`
appears to suggest that there are indeed different types of graph files.
Let's just write out the full name everywhere.
The full name, by the way, is not the dash-less "commit graph file".
Use the dashed form. (The next commit will fix the remaining few
instances of the "commit graph file" in this document.)
Signed-off-by: Martin Ågren <martin.agren@gmail.com> Reviewed-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
While we're here, fix an instance of "folder" to be "directory".
Signed-off-by: Martin Ågren <martin.agren@gmail.com> Reviewed-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
We have a couple of bullet items which span multiple lines, and where we
have prefixed each line with a `*`. (This might be the result of a text
editor trying to help.) This results in each line being typeset as a
separate bullet item. Drop the extra `*`.
Signed-off-by: Martin Ågren <martin.agren@gmail.com> Reviewed-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The gitcredentials documentation implied that the config file's
"pattern" URL might include a path component, but did not explain that
it must match exactly (potentially leaving readers with the false hope
that it would support a more flexible prefix match).
Signed-off-by: David Zych <dmrz@illinois.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
commit: fix erroneous BUG, 'multiple renames on the same target? how?'
builtin/commit.c:prepare_to_commit() can call run_status() twice if
using the editor, including status, and the user attempts to record a
non-merge empty commit without explicit --allow-empty. If there is also
a rename involved as well (due to using 'git add -N'), then a BUG in
wt-status.c is triggered:
BUG: wt-status.c:476: multiple renames on the same target? how?
The reason we hit this bug is that both run_status() calls use the same
struct wt_status * (named s), and s->change is not freed between runs.
Changes are inserted into s with string_list_insert, which usually means
that the second run just recomputes all the same results and overwrites
what was computed the first time. However, ever since commit 176ea7479309 ("wt-status.c: handle worktree renames", 2017-12-27),
wt-status started checking for renames and copies but also added a
preventative check that d->rename_status wasn't already set and output a
BUG message if it was. The problem isn't that there are multiple rename
targets to a single path as the error implies, the problem is that 's'
is not freed/cleared between the two run_status() calls.
Ever since commit dc6b1d92ca9c ("wt-status: use settings from
git_diff_ui_config", 2018-05-04), which stopped hardcoding
DIFF_DETECT_RENAME and allowed users to ask for copy detection, this bug
has also been triggerable with a copy instead of a rename.
Fix the bug by clearing s->change. A better change might be to clean up
all of s between the two run_status() calls. A good first step towards
such a goal might be writing a function to free the necessary fields in
the wt_status * struct; a cursory glance at the code suggests all of its
allocated data is probably leaked. However, doing all that cleanup is a
bigger task for someone else interested to tackle; just fix the bug for
now.
Reported-by: Andrea Stacchiotti <andreastacchiotti@gmail.com> Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>