* git://git.kernel.org/pub/scm/gitk/gitk:
Make gitk save and restore window pane position on Linux and Cygwin.
Make gitk save and restore the user set window position.
[PATCH] gitk: Use show-ref instead of ls-remote
[PATCH] Make gitk work reasonably well on Cygwin.
[PATCH] gitk - remove trailing whitespace from a few lines.
Change git repo-config to git config
Since `git add` is the approved porcelain for an end-user to invoke
when they want to manipulate the index, porcelain documentation
should steer the user to this command rather than the pure plumbing
update-index.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
Attempt to improve git-rebase lead-in description.
It was mentioned on #git this morning that the lead-in description
of git-rebase is very confusing. Too many branch this and branch
that in a very short run of text.
This new description attempts to walk the user through the command
syntax, while also describing exactly what git-rebase is doing to
their repository.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
Do not take mode bits from index after type change.
When we do not trust executable bit from lstat(2), we copied
existing ce_mode bits without checking if the filesystem object
is a regular file (which is the only thing we apply the "trust
executable bit" business) nor if the blob in the index is a
regular file (otherwise, we should do the same as registering a
new regular file, which is to default non-executable).
The 3rd branch in builtin-blame.c should also check for lacking
arguments. Running that in top dir does not trigger the problem
because the 'prefix' is NULL.
Signed-off-by: Tommi Kyntola <tommi.kyntola@ray.fi> Signed-off-by: Junio C Hamano <junkio@cox.net>
git-merge: minor fix for no_trivial_merge_strategies.
The shell loop to determine if we should skip the trivial
in-index merge stage based on what strategy is given was not
prepared to have more than one strategy listed in the variable
$no_trivial_merge_strategies.
This does not trigger unless you use a modified git but the fix
is simple and straightforward, so let's fix it before 1.5.0.1.
When somebody else extracts git tarball inside a larger project,
'git describe' would reported the version number of that upper
level project.
Sometimes, using the consistent versioning across subdirectories
of a larger project is useful, but it may not always be the
right thing to do.
This changes the script to check ./vertion file first, and then
fall back to "git describe". This way, by default, tarball
distribution will get our own version. If the upper level wants
to use consistent versioning across its subdirectories, its
Makefile can overwrite ./version file to force whatever version
number they want to give us before descending into us.
Make gitk save and restore window pane position on Linux and Cygwin.
Subtle bugs remained on both Cygwin and Linux that caused the various
window panes to be restored in positions different than where the user
last placed them. Sergey Vlasov posed a pair of suggested fixes to this,
what is done here is slightly different. The basic fix here involves
a) explicitly remembering and restoring the sash positions for the upper
window, and b) using paneconfigure to redundantly set height and width of
other elements. This redundancy is needed as Cygwin Tcl has a nasty habit
of setting pane sizes to zero if their slaves are not configured with a
specific size, but Linux Tcl does not honor the specific size given.
Signed-off-by: Mark Levedahl <mdl123@verizon.net> Signed-off-by: Junio C Hamano <junkio@cox.net>
Make gitk save and restore the user set window position.
gitk was saving widget sizes and positions when the main window was
destroyed, which is after all child widgets are destroyed. The cure
is to trap the WM_DELETE_WINDOW event before the gui is torn down. Also,
the saved geometry was captured using "winfo geometry .", rather than
"wm geometry ." Under Linux, these two return different answers and the
latter one is correct.
[jc: credit goes to Brett Schwarz for suggesting the use of "wm protocol";
I also squashed the follow-up patch to remove extraneous -0
from expressions.]
Signed-off-by: Mark Levedahl <mdl123@verizon.net> Signed-off-by: Junio C Hamano <junkio@cox.net>
It used to be ls-remote on self was the only easy way to grab
the ref information. Now we have show-ref which does not
involve fork and IPC, so use it.
Signed-off-by: Junio C Hamano <junkio@cox.net> Signed-off-by: Paul Mackerras <paulus@samba.org>
The gitk gui layout was completely broken on Cygwin. If gitk was started
without previous geometry in ~/.gitk, the user could drag the window sashes
to get a useable layout. However, if ~/.gitk existed, this was not possible
at all.
The fix was to rewrite makewindow, changing the toplevel containers and
the particular geometry information saved between sessions. Numerous bugs
in both the Cygwin and the Linux Tk versions make this a delicate
balancing act: the version here works in both but many subtle variants
are competely broken in one or the other environment.
Three user visible changes result:
1 - The viewer is fully functional under Cygwin.
2 - The search bar moves from the bottom to the top of the lower left
pane. This was necessary to get around a layout problem on Cygwin.
3 - The window size and position is saved and restored between sessions.
Again, this is necessary to get around a layout problem on Cygwin.
Signed-off-by: Mark Levedahl <mdl123@verizon.net> Signed-off-by: Junio C Hamano <junkio@cox.net> Signed-off-by: Paul Mackerras <paulus@samba.org>
Clarify two backward incompatible repository options.
It was unclear if the backward compatible features were disabled
or the configuration variables that controls them were set to
false by default from the description. Obviously we meant the
former, but the problem was made worse by the fact that one
configuration variable breaks compatibility when set to true and
the other one breaks it when set to false.
This also adds a hook in the Makefile I can use to automatically
include pointers to documentation for older releases when updating
the pages at http://kernel.org/pub/software/scm/git/docs/.
Mark places that need blob munging later for CRLF conversion.
Here's a patch that I think we can merge right now. There may be
other places that need this, but this at least points out the
three places that read/write working tree files for git
update-index, checkout and diff respectively. That should cover
a lot of it [jc: git-apply uses an entirely different codepath
both for reading and writing].
Some day we can actually implement it. In the meantime, this
points out a place for people to start. We *can* even start with
a really simple "we do CRLF conversion automatically, regardless
of filename" kind of approach, that just look at the data (all
three cases have the _full_ file data already in memory) and
says "ok, this is text, so let's convert to/from DOS format
directly".
THAT somebody can write in ten minutes, and it would already
make git much nicer on a DOS/Windows platform, I suspect.
And it would be totally zero-cost if you just make it a config
option (but please make it dynamic with the _default_ just being
0/1 depending on whether it's UNIX/Windows, just so that UNIX
people can _test_ it easily).
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
"git-fetch --tags $URL" should not overwrite existing tags
Use the same --exclude-existing filter as we use for automatic
tag following to avoid overwriting existing tags with replacement
ones the other side created.
Some of the git-svn tests can fail on fast machines due to a race in
Subversion: if a file is modified in the same second it was checked out
(or in for that matter), Subversion will not consider it modified. This
works around the problem by increasing the timestamp by one second
before each commit.
[jc: with "touch -r -d" replacement from Eric]
Acked-by: Eric Wong <normalperson@yhbt.net> Signed-off-by: Michael Spang <mspang@uwaterloo.ca> Signed-off-by: Junio C Hamano <junkio@cox.net>
Make gitk save and restore window pane position on Linux and Cygwin.
Subtle bugs remained on both Cygwin and Linux that caused the various
window panes to be restored in positions different than where the user
last placed them. Sergey Vlasov posed a pair of suggested fixes to this,
what is done here is slightly different. The basic fix here involves
a) explicitly remembering and restoring the sash positions for the upper
window, and b) using paneconfigure to redundantly set height and width of
other elements. This redundancy is needed as Cygwin Tcl has a nasty habit
of setting pane sizes to zero if their slaves are not configured with a
specific size, but Linux Tcl does not honor the specific size given.
Signed-off-by: Mark Levedahl <mdl123@verizon.net> Signed-off-by: Junio C Hamano <junkio@cox.net>
I'm exporting gitexecdir because git-gui wants to know where
it should install git-gui and git-citool. These belong under
gitexecdir, just like git-diff, as the git wrapper is able to
invoke these commands for the end-user.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
* 'master' of git://repo.or.cz/git-gui:
git-gui: Change base version to 0.6.
git-gui: Guess our version accurately as a subproject.
git-gui: Handle gitgui tags in version gen.
git-gui: Generate a version file on demand.
git-gui: Rename GIT_VERSION to GITGUI_VERSION.
git-gui: Allow gitexecdir, INSTALL to be set by the caller.
This is the start of the 0.6 series of git-gui. I'm calling it 0.6
(rather than any other value) as I already had a private tag on
one system based on 0.5, and that tag is quite a bit behind this
version.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
git-gui: Guess our version accurately as a subproject.
When we are included as a subproject, such as how git.git carries
us, we want to retain our own version number and not the version
number assigned by git.git's own tags. Consequently we need to
locate the correct tag which applies to our tree content and
its commit lineage.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
I've decided to use gitgui-0.5 as the format for tags in the
git-gui repository. The prefix of gitgui was chosen here to
make its namespace different from the namespace used by git
itself, allowing developers to pull both tag namespaces into
the same repository.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Because git-gui is being shipped as a subproject of the main
Git project and will often have a different lifecycle than
the main Git project, we should ship our own version number
in the release tarball rather than relying on the main Git
version file.
Git's master Makefile will invoke our own with the target
dist-version, asking us to save off our GITGUI_VERSION value
into our own version file, so that our GIT-VERSION-GEN script
can recover it at build time.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Now that the decision has been made to treat git-gui as a
subproject, rather than merging it directly into git, we
should use a different substitution for our version value
to avoid any possible confusion.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
git-gui: Allow gitexecdir, INSTALL to be set by the caller.
When used as a subproject within git.git our Makefile must honor
the gitexecdir which git.git's Makefile is passing down to us,
ensuring that we install our executables into the libexec chosen
by the end-user or packager.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
fast-import: Support reusing 'from' and brown paper bag fix reset.
It was suggested on the mailing list that being able to use `from`
in any commit to reset the current branch is useful in some types of
importers, such as a darcs importer.
We originally did not permit resetting an existing branch with a
new `from` command during a `commit` command, but this restriction
was only to help debug the hacked up cvs2svn that Jon Smirl was
developing in parallel with git-fast-import. It is probably more
of a problem to disallow it than to allow it. So now we permit a
`from` during any `commit`.
While making the changes required to permit multiple `from`
commands on the same branch, I discovered we no longer needed the
last_commit field to be set to 0 during a reset, so that was removed.
(Reset was originally setting the field to 0 to signal cmd_from()
that it was OK to execute on the branch.)
While poking around in this section of fast-import I also realized
the `reset` command was not working as intended if the corresponding
`from` command was omitted (as allowed by the BNF grammar and the
code). If `from` was omitted we cleared out the tree but we left
the tree SHA-1 and parent commit SHA-1 intact. This is not what
the user intended in this case. Instead they would be trying to
reset the branch to have no parent and to have no tree, making the
branch look new-born during the next commit. We now clear these
SHA-1 values during `reset`, ensuring the branch looks new-born if
`from` does not get supplied.
New test cases for these were also added.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Merge branch 'master' of git://repo.or.cz/git/fastimport
* 'master' of git://repo.or.cz/git/fastimport:
bash: Hide git-fast-import.
fast-import: Add tip about importing renames.
fast-import: Hide the pack boundary commits by default.
The new git-fast-import command is not intended to be invoked
directly by an end user. So offering it as a possible completion
for a subcommand is not very useful.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
fast-import: Hide the pack boundary commits by default.
Most users don't need the pack boundary information that fast-import
was printing to standard output, especially if they were calling
it with --quiet.
Those users who do want this information probably want it captured
so they can go back and use it to repack the imported repository.
So dumping the boundary commits to a log file makes more sense then
printing them to standard output.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Now that git 1.5.0 and later contains a version of gitk that uses
correct geometry on Windows platforms, even if ~/.gitk exists, we
should not delete the user's ~/.gitk to work around the bug. It
is downright mean to remove a user's preferences for another app.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Make gitk save and restore the user set window position.
gitk was saving widget sizes and positions when the main window was
destroyed, which is after all child widgets are destroyed. The cure
is to trap the WM_DELETE_WINDOW event before the gui is torn down. Also,
the saved geometry was captured using "winfo geometry .", rather than
"wm geometry ." Under Linux, these two return different answers and the
latter one is correct.
[jc: credit goes to Brett Schwarz for suggesting the use of "wm protocol";
I also squashed the follow-up patch to remove extraneous -0
from expressions.]
Signed-off-by: Mark Levedahl <mdl123@verizon.net> Signed-off-by: Junio C Hamano <junkio@cox.net>
Some of the short help texts that are shown e.g. when running 'git'
without any parameters wrap on a 80-column terminal. They are just
one character over the line. This patch avoids it by decreasing the
number of spaces around the preceding command name from four to
three (on both sides for symmetry).
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx> Signed-off-by: Junio C Hamano <junkio@cox.net>
This adds the support for automatically updating the buffer while editing.
A configuration variable git-blame-autoupdate controls whether this should
be enabled or not.
Signed-off-by: David Kågedal <davidk@lysator.liu.se> Signed-off-by: Junio C Hamano <junkio@cox.net>
Make git-blame use the current buffer contents for the blame, instead of
the saved file. This makes the blame correct even if there are unsaved
changes.
Also added a git-reblame command.
Signed-off-by: David Kågedal <davidk@lysator.liu.se> Signed-off-by: Junio C Hamano <junkio@cox.net>
Change installation instructions to using either "(require 'git-blame)"
or appropriate autoload instruction in GNU Emacs init file, .emacs
This required adding "(provide 'git-blame)" at the end of git-blame.el
and adding [preliminary] docstring to `git-blame-mode' function for
consistency (to mark function as interactive in `autoload' we have to
provide docstring as DOCSTRING is third arg, and INTERACTIVE fourth,
and both are optional). `git-blame-mode' is marked to autoload.
While at it ensure that we add `git-blame-mode' to `minor-mode-alist'
only once (in a way that does not depend on `cl' package).
Signed-off-by: Jakub Narebski <jnareb@gmail.com> Signed-off-by: Junio C Hamano <junkio@cox.net>
git-blame: Add Emacs Lisp file headers and GNU GPL boilerplate
Add Emacs Lisp file headers, according to "Coding Conventions" chapter
in Emacs Lisp Reference Manual and Elisp Area Convetions for
EmacsWiki:
http://www.emacswiki.org/cgi-bin/wiki/ElispAreaConventions
Those include: copyright notice, GNU GPL boilerplate, description and
instalation instructions as provided in email and in commit message
introducing git-blame.el, compatibility notes from another email by
David Kågedal about what to change to use it in GNU Emacs 20, and
"git-blame ends here" to detect if file was truncated. First line
includes setting file encoding via first line local variable values
(file variables).
Added comment to "(require 'cl)" to note why it is needed; "Coding
Conventions" advises to avoid require the `cl' package of Common Lisp
extensions at run time.
Signed-off-by: Jakub Narebski <jnareb@gmail.com> Signed-off-by: Junio C Hamano <junkio@cox.net>
reflog: handle $name => remotes/%s/HEAD mapping consistently for logs
When refs/remotes/gfi/master and refs/remotes/gfi/HEAD exist,
and the latter is a symref that points at the former, dwim_ref()
resolves string "gfi" to "refs/remotes/gfi/master" as expected,
but dwim_log() does not understand "gfi@{1.day}" and needs to be
told "gfi/master@{1.day}". This is confusing.
Rather than trying to mark the background color of the line numbers
to show which lines have annotated data loaded, we now show a ruler
between the line numbers and the file data. This ruler is just 1
character wide and its background color is set to grey to denote
which lines have annotation ready. I had to make this change as I
kept loosing the annotation marker when a line was no longer colored
as part of the current selection.
We now color the lines blamed on the current commit in yellow, the
lines in the commit which came after (descendant) in red (hotter,
less tested) and the lines in the commit before (ancestor) in blue
(cooler, better tested).
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
git-gui: Jump to the first annotation block as soon as its available.
To help clue users into the fact that annotation data arrives
incrementally, and that they should try to locate the region
they want while the tool is running, we jump to the first line
of the first annotation if the user has not already clicked on
a line they are interested in and if the window is still looking
at the very top of the file.
Since it takes a second (at least on my PowerBook) to even generate
the first annotation for git-gui.sh, the user should have plenty of
time to adjust the scrollbar or click on a line even before we get
that first annotation record in, which allows the user to bypass
our automatic jumping.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Using 180 columns worth of screen space to display just 20 columns of
file data and 160 columns worth of annotation information is not
practically useful. Users need/want to see the file data, and have
the anotation associated with it displayed in a detail pane only when
they have focused on a particular region of the file.
Now our file viewer has a small 10-line high pane below the file
which shows the commit message for the commit this line was blamed
on. The columns have all been removed, except the current line
number column as that has some real value when trying to locate an
interesting block.
To keep the user entertained we have a progress meter in the status
bar of the viewer which lets them know how many lines have been
annotated, and how much has been completed. We use a grey background
on the line numbers for lines which we have obtained annotation from,
and we color all lines in the current commit with a yellow background,
so they stand out when scanning through the file. All other lines
are kept with a white background, making the yellow really pop.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Now that core Git has "renamed" git-repo-config to git-config,
we should do the same. I don't know how long core Git will
keep the repo-config command, and since git-gui's userbase
is so small and almost entirely on some flavor of 1.5.0-rc2
or later, where the rename has already taken place, it should
be OK to rename now.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
One user that I spoke with recently was confused why the 'Add All'
button did not add all of his 'Changed But Not Updated' files.
The particular files in question were new, and thus not known to
Git. Since the 'Add All' routine only updates files which are
already tracked, they were not added automatically.
I suspect that calling this action 'Add Existing' would be less
confusing, so I'm renaming it.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
If we are invoked as `git-foo`, then we should run the `foo` subcommand,
as the user has made some sort of link from `git-foo` to our actual
program code. So we should honor their request.
If we are invoked as `git-gui foo`, the user has not made a link (or
did, but is not using it right now) so we should execute the `foo`
subcommand.
We now can start the single commit UI mode via `git-citool` and also
through `git gui citool`.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Viewing annotated files is one of those tasks that is relatively
difficult to do in a simple vt100 terminal emulator. The user
really wants to be able to browse through a lot of information,
and to interact with it by navigating through revisions.
Now users can start our file viewer with annotations by running
'git gui blame commit path', thereby seeing the contents of the
given file at the given commit. Right now I am being lazy by
not allowing the user to omit the commit name (and have us thus
assume HEAD).
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>