Add the 'plain' mode for move detection of code. This omits the checking
for adjacent blocks, so it is not as useful. If you have a lot of the
same blocks moved in the same patch, the 'Zebra' would end up slow as it
is O(n^2) (n is number of same blocks). So this may be useful there and
is generally easy to add. Instead be very literal at the move detection,
do not skip over short blocks here.
Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a patch consists mostly of moving blocks of code around, it can
be quite tedious to ensure that the blocks are moved verbatim, and not
undesirably modified in the move. To that end, color blocks that are
moved within the same patch differently. For example (OM, del, add,
and NM are different colors):
If the moved code is larger, it is easier to hide some permutation in the
code, which is why some alternative coloring is needed.
This patch implements the first mode:
* basic alternating 'Zebra' mode
This conveys all information needed to the user. Defer customization to
later patches.
First I implemented an alternative design, which would try to fingerprint
a line by its neighbors to detect if we are in a block or at the boundary.
This idea iss error prone as it inspected each line and its neighboring
lines to determine if the line was (a) moved and (b) if was deep inside
a hunk by having matching neighboring lines. This is unreliable as the
we can construct hunks which have equal neighbors that just exceed the
number of lines inspected. (Think of 'AXYZBXYZCXYZD..' with each letter
as a line, that is permutated to AXYZCXYZBXYZD..').
Instead this provides a dynamic programming greedy algorithm that finds
the largest moved hunk and then has several modes on highlighting bounds.
A note on the options '--submodule=diff' and '--color-words/--word-diff':
In the conversion to use emit_line in the prior patches both submodules
as well as word diff output carefully chose to call emit_line with sign=0.
All output with sign=0 is ignored for move detection purposes in this
patch, such that no weird looking output will be generated for these
cases. This leads to another thought: We could pass on '--color-moved' to
submodules such that they color up moved lines for themselves. If we'd do
so only line moves within a repository boundary are marked up.
It is useful to have moved lines colored, but there are annoying corner
cases, such as a single line moved, that is very common. For example
in a typical patch of C code, we have closing braces that end statement
blocks or functions.
While it is technically true that these lines are moved as they show up
elsewhere, it is harmful for the review as the reviewers attention is
drawn to such a minor side annoyance.
For now let's have a simple solution of hardcoding the number of
moved lines to be at least 3 before coloring them. Note, that the
length is applied across all blocks to find the 'lonely' blocks
that pollute new code, but do not interfere with a permutated
block where each permutation has less lines than 3.
Helped-by: Jonathan Tan <jonathantanmy@google.com> Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
convert: add "status=delayed" to filter process protocol
Some `clean` / `smudge` filters may require a significant amount of
time to process a single blob (e.g. the Git LFS smudge filter might
perform network requests). During this process the Git checkout
operation is blocked and Git needs to wait until the filter is done to
continue with the checkout.
Teach the filter process protocol, introduced in edcc8581 ("convert: add
filter.<driver>.process option", 2016-10-16), to accept the status
"delayed" as response to a filter request. Upon this response Git
continues with the checkout operation. After the checkout operation Git
calls "finish_delayed_checkout" which queries the filter for remaining
blobs. If the filter is still working on the completion, then the filter
is expected to block. If the filter has completed all remaining blobs
then an empty response is expected.
Git has a multiple code paths that checkout a blob. Support delayed
checkouts only in `clone` (in unpack-trees.c) and `checkout` operations
for now. The optimization is most effective in these code paths as all
files of the tree are processed.
Signed-off-by: Lars Schneider <larsxschneider@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The code to negotiate long running filter capabilities was very
repetitive for new capabilities. Replace the repetitive conditional
statements with a table-driven approach. This is useful for the
subsequent patch 'convert: add "status=delayed" to filter process
protocol'.
Suggested-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: Lars Schneider <larsxschneider@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git status" has long shown essentially the same message as "git
commit"; the message it gives while preparing for the root commit,
i.e. "Initial commit", was hard to understand for some new users.
Now it says "No commits yet" to stress more on the current status
(rather than the commit the user is preparing for, which is more in
line with the focus of "git commit").
* ks/status-initial-commit:
status: contextually notify user about an initial commit
Traditionally, the default die() routine had a code to prevent it
from getting called multiple times, which interacted badly when a
threaded program used it (one downside is that the real error may
be hidden and instead the only error message given to the user may
end up being "die recursion detected", which is not very useful).
* ab/die-errors-in-threaded:
die(): stop hiding errors due to overzealous recursion guard
Fix a recent regression to "git rebase -i" and add tests that would
have caught it and others.
* pw/rebase-i-regression-fix-tests:
t3420: fix under GETTEXT_POISON build
rebase: add more regression tests for console output
rebase: add regression tests for console output
rebase -i: add test for reflog message
sequencer: print autostash messages to stderr
Introduce a new option 'emitted_symbols' in the struct diff_options which
controls whether all output is buffered up until all output is available.
It is set internally in diff.c when necessary.
We'll have a new struct 'emitted_string' in diff.c which will be used to
buffer each line. The emitted_string will duplicate the memory of the
line to buffer as that is easiest to reason about for now. In a future
patch we may want to decrease the memory usage by not duplicating all
output for buffering but rather we may want to store offsets into the
file or in case of hunk descriptions such as the similarity score, we
could just store the relevant number and reproduce the text later on.
This approach was chosen as a first step because it is quite simple
compared to the alternative with less memory footprint.
emit_diff_symbol factors out the emission part and depending on the
diff_options->emitted_symbols the emission will be performed directly
when calling emit_diff_symbol or after the whole process is done, i.e.
by buffering we have add the possibility for a second pass over the
whole output before doing the actual output.
In 6440d34 (2012-03-14, diff: tweak a _copy_ of diff_options with
word-diff) we introduced a duplicate diff options struct for word
emissions as we may have different regex settings in there.
When buffering the output, we need to operate on just one buffer,
so we have to copy back the emissions of the word buffer into the
main buffer.
Unconditionally enable output via buffer in this patch as it yields
a great opportunity for testing, i.e. all the diff tests from the
test suite pass without having reordering issues (i.e. only parts
of the output got buffered, and we forgot to buffer other parts).
The test suite passes, which gives confidence that we converted all
functions to use emit_string for output.
Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
diff.c: convert word diffing to use emit_diff_symbol
The word diffing is not line oriented and would need some serious
effort to be transformed into a line oriented approach, so
just go with a symbol DIFF_SYMBOL_WORD_DIFF that is a partial line.
Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
diff.c: convert show_stats to use emit_diff_symbol
We call print_stat_summary from builtin/apply, so we still
need the version with a file pointer, so introduce
print_stat_summary_0 that uses emit_string machinery and
keep print_stat_summary with the same arguments around.
Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
submodule.c: migrate diff output to use emit_diff_symbol
As the submodule process is no longer attached to the same file pointer
'o->file' as the superprojects process, there is a different result in
color.c::check_auto_color. That is why we need to pass coloring explicitly,
such that the submodule coloring decision will be made by the child process
processing the submodule. Only DIFF_SYMBOL_SUBMODULE_PIPETHROUGH contains
color, the other symbols are for embedding the submodule output into the
superprojects output.
Remove the colors from the function signatures, as all the coloring
decisions will be made either inside the child process or the final
emit_diff_symbol, but not in the functions driving the submodule diff.
Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
diff.c: emit_diff_symbol learns about DIFF_SYMBOL_BINARY_FILES
we could save a little bit of memory when buffering in a later mode
by just passing the inner part ("%s and %s", file1, file 2), but
those a just a few bytes, so instead let's reuse the implementation from
DIFF_SYMBOL_HEADER and keep the whole line around.
Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
We have to use fprintf instead of emit_line, because we want to emit the
tab after the color. This is important for ancient versions of gnu patch
AFAICT, although we probably do not want to feed colored output to the
patch utility, such that it would not matter if the trailing tab is
colored. Keep the corner case as-is though.
Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
diff.c: migrate emit_line_checked to use emit_diff_symbol
Add a new flags field to emit_diff_symbol, that will be used by
context lines for:
* white space rules that are applicable (The first 12 bits)
Take a note in cahe.c as well, when this ws rules are extended we have
to fix the bits in the flags field.
* how the rules are evaluated (actually this double encodes the sign
of the line, but the code is easier to keep this way, bits 13,14,15)
* if the line a blank line at EOF (bit 16)
The check if new lines need to be marked up as extra lines at the end of
file, is now done unconditionally. That should be ok, as
'new_blank_line_at_eof' has a quick early return.
Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
In a later patch we want to buffer all output before emitting it as a
new feature ("markup moved lines") conceptually cannot be implemented
in a single pass over the output.
There are different approaches to buffer all output such as:
* Buffering on the char level, i.e. we'd have a char[] which would
grow at approximately 80 characters a line. This would keep the
output completely unstructured, but might be very easy to implement,
such as redirecting all output to a temporary file and working off
that. The later passes over the buffer are quite complicated though,
because we have to parse back any output and then decide if it should
be modified.
* Buffer on a line level. As the output is mostly line oriented already,
this would make sense, but it still is a bit awkward as we'd have to
make sense of it again by looking at the first characters of a line
to decide what part of a diff a line is.
* Buffer semantically. Imagine there is a formal grammar for the diff
output and we'd keep the symbols of this grammar around. This keeps
the highest level of structure in the buffered data, such that the
actual memory requirements are less than say the first option. Instead
of buffering the characters of the line, we'll buffer what we intend
to do plus additional information for the specifics. An output of
diff --git a/new.txt b/new.txt
index fa69b07..412428c 100644
Binary files a/new.txt and b/new.txt differ
could be buffered as
DIFF_SYMBOL_DIFF_START + new.txt
DIFF_SYMBOL_INDEX_MODE + fa69b07412428c "non-executable" flag
DIFF_SYMBOL_BINARY_FILES + new.txt
This and the following patches introduce the third option of buffering
by first moving any output to emit_diff_symbol, and then introducing the
buffering in this function.
Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
diff.c: factor out diff_flush_patch_all_file_pairs
In a later patch we want to do more things before and after all filepairs
are flushed. So factor flushing out all file pairs into its own function
that the new code can be plugged in easily.
Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
diff.c: move line ending check into emit_hunk_header
The emit_hunk_header() function is responsible for assembling a
hunk header and calling emit_line() to send the hunk header
to the output file. Its only caller fn_out_consume() needs
to prepare for a case where the function emits an incomplete
line and add the terminating LF.
Instead make sure emit_hunk_header() to always send a
completed line to emit_line().
Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Merge branch 'sb/hashmap-customize-comparison' into sb/diff-color-move
* sb/hashmap-customize-comparison: (566 commits)
hashmap: migrate documentation from Documentation/technical into header
patch-ids.c: use hashmap correctly
hashmap.h: compare function has access to a data field
Twelfth batch for 2.14
Git 2.13.2
Eleventh batch for 2.14
Revert "split-index: add and use unshare_split_index()"
Tenth batch for 2.14
add--interactive: quote commentChar regex
add--interactive: handle EOF in prompt_yesno
auto-correct: tweak phrasing
docs: update 64-bit core.packedGitLimit default
t7508: fix a broken indentation
grep: fix erroneously copy/pasted variable in check/assert pattern
Ninth batch for 2.14
glossary: define 'stash entry'
status: add optional stash count information
stash: update documentation to use 'stash entry'
for_each_bisect_ref(): don't trim refnames
mergetools/meld: improve compatibiilty with Meld on macOS X
...
As alluded to in the previous patch, the code in patch-ids.c is
using the hashmaps API wrong.
Luckily we do not have a bug, as all hashmap functionality that we use
here (hashmap_get) passes through the keydata. If hashmap_get_next were
to be used, a bug would occur as that passes NULL for the key_data.
So instead use the hashmap API correctly and provide the caller required
data in the compare function via the first argument that always gets
passed and was setup via the hashmap_init function.
Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
hashmap.h: compare function has access to a data field
When using the hashmap a common need is to have access to caller provided
data in the compare function. A couple of times we abuse the keydata field
to pass in the data needed. This happens for example in patch-ids.c.
This patch changes the function signature of the compare function
to have one more void pointer available. The pointer given for each
invocation of the compare function must be defined in the init function
of the hashmap and is just passed through.
Documentation of this new feature is deferred to a later patch.
This is a rather mechanical conversion, just adding the new pass-through
parameter. However while at it improve the naming of the fields of all
compare functions used by hashmaps by ensuring unused parameters are
prefixed with 'unused_' and naming the parameters what they are (instead
of 'unused' make it 'unused_keydata').
Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
grep: remove redundant REG_NEWLINE when compiling fixed regex
Remove the redundant REG_NEWLINE regcomp() flag from the code that
compiles a fixed-string regular-expression.
The REG_NEWLINE causes metacharacters such as "." to match a newline,
since the basic_regex_quote_buf() function being called here escapes
all metacharacters using REG_NEWLINE is confusing and redundant.
The use of this flag was introduced as an unintended emergent property
of 793dc676e0 ("grep/icase: avoid kwsset when -F is specified",
2016-06-25).
That change amended the existing regflags, which were initialized to
REG_NEWLINE in init_grep_defaults() assuming a subsequent non-fixed
regcomp().
Manual testing reveals that this was always redundant, since no flags
of any use were inherited from opt->regflags even back
then. 793dc676e0 passes all tests with this on top:
grep: remove regflags from the public grep_opt API
Refactor calls to the grep machinery to always pass opt.ignore_case &
opt.extended_regexp_option instead of setting the equivalent regflags
bits.
The bug fixed when making -i work with -P in commit 9e3cbc59d5 ("log:
make --regexp-ignore-case work with --perl-regexp", 2017-05-20) was
really just plastering over the code smell which this change fixes.
The reason for adding the extensive commentary here is that I
discovered some subtle complexity in implementing this that really
should be called out explicitly to future readers.
Before this change we'd rely on the difference between
`extended_regexp_option` and `regflags` to serve as a membrane between
our preliminary parsing of grep.extendedRegexp and grep.patternType,
and what we decided to do internally.
Now that those two are the same thing, it's necessary to unset
`extended_regexp_option` just before we commit in cases where both of
those config variables are set. See 84befcd0a4 ("grep: add a
grep.patternType configuration setting", 2012-08-03) for the code and
documentation related to that.
The explanation of why the if/else branches in
grep_commit_pattern_type() are ordered the way they are exists in that
commit message, but I think it's worth calling this subtlety out
explicitly with a comment for future readers.
Even though grep_commit_pattern_type() is the only caller of
grep_set_pattern_type_option() it's simpler to reset the
extended_regexp_option flag in the latter, since 2/3 branches in the
former would otherwise need to reset it, this way we can do it in one
place.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
grep: remove redundant and verbose re-assignments to 0
Remove the redundant re-assignments of the fixed/pcre1/pcre2 fields to
zero right after the entire struct has been set to zero via
memset(...).
See an earlier related cleanup commit e0b9f8ae09 ("grep: remove
redundant regflags assignments", 2017-05-25) for an explanation of why
the code was structured like this to begin with.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
grep: remove redundant "fixed" field re-assignment to 0
Remove the redundant re-assignment of the fixed field to zero right
after the entire struct has been set to zero via memset(...).
Unlike some nearby commits this pattern doesn't date back to the
pattern described in e0b9f8ae09 ("grep: remove redundant regflags
assignments", 2017-05-25), instead it was apparently cargo-culted in 9eceddeec6 ("Use kwset in grep", 2011-08-21).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
grep: adjust a redundant grep pattern type assignment
Adjust a now-redundant assignment to extended_regexp_option to make it
zero if grep.extendedRegexp is not set. This is always called right
after init_grep_defaults() which memsets the entire structure to 0, so
there's no need to set it again to zero.
However the reason for the if/else pattern is a holdover from[1] where
this was adjusted from a bitfield assignment to a boolean. Rather than
getting rid of the assignment to 0 in all cases, let's just use the
value returned by git_config_bool(), which is more idiomatic and in
sync with the rest of the boolean handling in this function.
This is a logical follow-up to my commit to remove redundant regflags
assignments[2]. This logic was originally introduced in [3], but as
explained in the former commit it's working around a pattern in our
code that no longer exists, and is now confusing as it leads the
reader to think that this needs to be flipped back & forth.
1. 84befcd0a4 ("grep: add a grep.patternType configuration setting",
2012-08-03)
2. e0b9f8ae09 ("grep: remove redundant regflags assignments",
2017-05-25)
3. b22520a37c ("grep: allow -E and -n to be turned on by default via
configuration", 2011-03-30)
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Stop assigning 0 to the extended_regexp_option field right after we've
zeroed out the entire struct with memset() just a few lines earlier.
Unlike some of the code being refactored in subsequent commits, this
was always completely redundant. See the original code introduced in 84befcd0a4 ("grep: add a grep.patternType configuration setting",
2012-08-03).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
unquote_path() does not handle quoted paths containing '\a',
even though quote.c::unquote_c_style() does, and quote.c:sq_lookup[]
tells quote.c::sq_must_quote() that '\007' must be quoted as '\a'.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move unquote_path() from git-add--interactive to Git.pm so it can be
used by other scripts. Note this is a straight copy, it does not
handle '\a'. That will be fixed in the next commit.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk> Signed-off-by: Junio C Hamano <gitster@pobox.com>
commit-template: distinguish status information unconditionally
The commit template adds the status information without
adding a new line to distinguish them in the absence
of optional parts. This results in difficulty in interpreting
it's content, specifically for inexperienced users.
Unconditionally, add new lines to separate the status message
from the other parts of the commit-template to make it more
readable.
Signed-off-by: Kaartic Sivaraam <kaarticsivaraam91196@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
commit-template: remove outdated notice about explicit paths
The notice that "git commit <paths>" default to "git commit
--only <paths>" was there since 756e3ee0 ("Merge branch
'jc/commit'", 2006-02-14). Back then, existing users of Git
expected the command doing "git commit --include <paths>", and
after the behaviour of the command was changed to align with
other people's "$scm commit <paths>", the text was added to help
them transition their expectations.
Remove the message that now has outlived its usefulness.
Signed-off-by: Kaartic Sivaraam <kaarticsivaraam91196@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
"rot13-filter.pl" always writes "OUT <size>" to the debug log at the end
of a response.
This works perfectly for the existing responses "abort", "error", and
"success". A new response "delayed", that will be introduced in a
subsequent patch, accepts the input without giving the filtered result
right away. At this point we cannot know the size of the response.
Therefore, we do not write "OUT <size>" for "delayed" responses.
To simplify the code we do not write "OUT <size>" for "abort" and
"error" responses either as their size is always zero.
Signed-off-by: Lars Schneider <larsxschneider@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are two rules for using FREE_AND_NULL in free.cocci, one for
pointer types and one for expressions. Both cause coccinelle to remove
empty lines and even newline characters between replacements for some
reason; consecutive "free(x);/x=NULL;" sequences end up as multiple
FREE_AND_NULL calls on the same time.
Remove the type rule, as the expression rule already covers it, and
rearrange the lines of the latter to place the addition of FREE_AND_NULL
between the removals, which causes coccinelle to leave surrounding
whitespace untouched.
Signed-off-by: Rene Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
submodule--helper: do not call utf8_fprintf() unnecessarily
The helper function utf8_fprintf(fp, ...) has exactly the same
effect to the output stream fp as fprintf(fp, ...) does, and the
only difference is that its return value counts in display columns
consumed (assuming that the payload is encoded in UTF-8), as opposed
to number of bytes.
There is no reason to call it unless the caller cares about its
return value.
GNU grep allows "\(A\|B\)" as alternation in BRE, but this is an
extension not understood by some other implementations of grep
(Michael Kebe reported an breakage on Solaris).
Rewrite the offending test to ERE and use egrep instead.
Noticed-by: Michael Kebe <michael.kebe@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Defining USE_ASCIIDOCTOR=1 when building Git uses asciidoctor over
asciidoc when generating DocBook and man page documentation. However,
the contrib/subtree module does not presently honour that flag.
This causes a build failure when asciidoc is not present on the build
system. Instead, adapt the main Documentation/Makefile logic to use
asciidoctor when requested.
Signed-off-by: A. Wilcox <AWilcox@Wilcox-Tech.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
builtin/fetch cleanup: always set default value for submodule recursing
The check for the default was introduced with 88a21979c5 (fetch/pull:
recurse into submodules when necessary, 2011-03-06), which replaced an
older construct (builtin/fetchs own implementation of the super-prefix)
introduced in be254a0ea9 (Add the 'fetch.recurseSubmodules' config setting,
2010-11-11) which made sense at the time as there was no default fetch
option for submodules at the time.
Set builtin/fetch.c#recurse_submodules_default to the same value as
submodule.c#config_fetch_recurse_submodules which is set via
set_config_fetch_recurse_submodules, such that the condition for checking
whether we have to set the default value becomes unnecessary.
Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
apply: check git diffs for mutually exclusive header lines
A file can either be added, removed, copied, or renamed, but no two of
these actions can be done by the same patch. Some of these combinations
provoke error messages due to missing file names, and some are only
caught by an assertion. Check git patches already as they are parsed
and report conflicting lines on sight.
Found by Vegard Nossum using AFL.
Reported-by: Vegard Nossum <vegard.nossum@oracle.com> Signed-off-by: Rene Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
An empty string as mode specification is accepted silently by git apply,
as Vegard Nossum found out using AFL. It's interpreted as zero. Reject
such bogus file modes, and only accept ones consisting exclusively of
octal digits.
Reported-by: Vegard Nossum <vegard.nossum@oracle.com> Signed-off-by: Rene Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2c93286a (fix "git apply --index ..." not to deref NULL) added a check
for git patches missing a +++ line, preventing a segfault. Check for
missing --- lines as well, and add a test for each case.
Found by Vegard Nossum using AFL.
Original-patch-by: Vegard Nossum <vegard.nossum@oracle.com> Signed-off-by: Rene Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git add -p" were updated in 2.12 timeframe to cope with custom
core.commentchar but the implementation was buggy and a
metacharacter like $ and * did not work.
The preceding bitmap entries have a 1-byte XOR-offset and 1-byte flags,
so their size is not a multiple of 4. Thus the name-hash cache is only
guaranteed to be 2-byte aligned and so we must use get_be32 rather than
indexing the array directly.
Signed-off-by: James Clarke <jrtc27@jrtc27.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "rot13-filter.pl" helper wrote its debug logs always to "rot13-filter.log".
Make this configurable by defining the log file as first parameter of
"rot13-filter.pl".
This is useful if "rot13-filter.pl" is configured multiple times similar to the
subsequent patch 'convert: add "status=delayed" to filter process protocol'.
Signed-off-by: Lars Schneider <larsxschneider@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The filter log files are modified on comparison. That might be
unexpected by the caller. It would be even undesirable if the caller
wants to reuse the original log files.
Address these issues by using temp files for modifications. This is
useful for the subsequent patch 'convert: add "status=delayed" to
filter process protocol'.
Signed-off-by: Lars Schneider <larsxschneider@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
has_sha1_file_with_flags() implements many mechanisms in common with
sha1_object_info_extended(). Make has_sha1_file_with_flags() a
convenience function for sha1_object_info_extended() instead.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, regardless of the contents of the "struct object_info" passed
to sha1_object_info_extended(), that function always accesses the
packfile whenever it returns information about a packed object, since it
needs to populate "u.packed".
Add the ability to pass NULL, and use NULL-ness of the argument to
activate an optimization in which sha1_object_info_extended() does not
needlessly access the packfile. A subsequent patch will make use of this
optimization.
A similar optimization is not made for the cached and loose cases as it
would not cause a significant performance improvement.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
sha1_file: teach sha1_object_info_extended more flags
Improve sha1_object_info_extended() by supporting additional
flags. This allows has_sha1_file_with_flags() to be modified to use
sha1_object_info_extended() in a subsequent patch.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
t1700: make sure split-index respects core.sharedrepository
Add a few tests to check that both the split-index file and the
shared-index file are created using the right permissions when
core.sharedrepository is set.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
read-cache: use shared perms when writing shared index
Since f6ecc62dbf (write_shared_index(): use tempfile module, 2015-08-10)
write_shared_index() has been using mks_tempfile() to create the
temporary file that will become the shared index.
But even before that, it looks like the functions used to create this
file didn't call adjust_shared_perm(), which means that the shared
index file has always been created with 600 permissions regardless
of the shared permission settings.
Because of that, on repositories created with `git init --shared=all`
and using the split index feature, one gets an error like:
Merge branch 'sg/revision-parser-skip-prefix' into maint
Code clean-up.
* sg/revision-parser-skip-prefix:
revision.c: use skip_prefix() in handle_revision_pseudo_opt()
revision.c: use skip_prefix() in handle_revision_opt()
revision.c: stricter parsing of '--early-output'
revision.c: stricter parsing of '--no-{min,max}-parents'
revision.h: turn rev_info.early_output back into an unsigned int
The result from "git diff" that compares two blobs, e.g. "git diff
$commit1:$path $commit2:$path", used to be shown with the full
object name as given on the command line, but it is more natural to
use the $path in the output and use it to look up .gitattributes.
* jk/diff-blob:
diff: use blob path for blob/file diffs
diff: use pending "path" if it is available
diff: use the word "path" instead of "name" for blobs
diff: pass whole pending entry in blobinfo
handle_revision_arg: record paths for pending objects
handle_revision_arg: record modes for "a..b" endpoints
t4063: add tests of direct blob diffs
get_sha1_with_context: dynamically allocate oc->path
get_sha1_with_context: always initialize oc->symlink_path
sha1_name: consistently refer to object_context as "oc"
handle_revision_arg: add handle_dotdot() helper
handle_revision_arg: hoist ".." check out of range parsing
handle_revision_arg: stop using "dotdot" as a generic pointer
handle_revision_arg: simplify commit reference lookups
handle_revision_arg: reset "dotdot" consistently
"git describe --contains" penalized light-weight tags so much that
they were almost never considered. Instead, give them about the
same chance to be considered as an annotated tag that is the same
age as the underlying commit would.
* jc/name-rev-lw-tag:
name-rev: favor describing with tags and use committer date to tiebreak
name-rev: refactor logic to see if a new candidate is a better name
A common pattern to free a piece of memory and assign NULL to the
pointer that used to point at it has been replaced with a new
FREE_AND_NULL() macro.
* ab/free-and-null:
*.[ch] refactoring: make use of the FREE_AND_NULL() macro
coccinelle: make use of the "expression" FREE_AND_NULL() rule
coccinelle: add a rule to make "expression" code use FREE_AND_NULL()
coccinelle: make use of the "type" FREE_AND_NULL() rule
coccinelle: add a rule to make "type" code use FREE_AND_NULL()
git-compat-util: add a FREE_AND_NULL() wrapper around free(ptr); ptr = NULL
Using "git add d/i/r" when d/i/r is the top of the working tree of
a separate repository would create a gitlink in the index, which
would appear as a not-quite-initialized submodule to others. We
learned to give warnings when this happens.
* jk/warn-add-gitlink:
t: move "git add submodule" into test blocks
add: warn when adding an embedded repository
Fix configuration codepath to pay proper attention to commondir
that is used in multi-worktree situation, and isolate config API
into its own header file.
* bw/config-h:
config: don't implicitly use gitdir or commondir
config: respect commondir
setup: teach discover_git_directory to respect the commondir
config: don't include config.h by default
config: remove git_config_iter
config: create config.h
* bw/ls-files-sans-the-index:
ls-files: factor out tag calculation
ls-files: factor out debug info into a function
ls-files: convert show_files to take an index
ls-files: convert show_ce_entry to take an index
ls-files: convert prune_cache to take an index
ls-files: convert ce_excluded to take an index
ls-files: convert show_ru_info to take an index
ls-files: convert show_other_files to take an index
ls-files: convert show_killed_files to take an index
ls-files: convert write_eolinfo to take an index
ls-files: convert overlay_tree_on_cache to take an index
tree: convert read_tree to take an index parameter
convert: convert renormalize_buffer to take an index
convert: convert convert_to_git to take an index
convert: convert convert_to_git_filter_fd to take an index
convert: convert crlf_to_git to take an index
convert: convert get_cached_convert_stats_ascii to take an index
The code to pick up and execute command alias definition from the
configuration used to switch to the top of the working tree and
then come back when the expanded alias was executed, which was
unnecessarilyl complex. Attempt to simplify the logic by using the
early-config mechanism that does not chdir around.
* js/alias-early-config:
alias: use the early config machinery to expand aliases
t7006: demonstrate a problem with aliases in subdirectories
t1308: relax the test verifying that empty alias values are disallowed
help: use early config when autocorrecting aliases
config: report correct line number upon error
discover_git_directory(): avoid setting invalid git_dir