If `git commit-tree HEAD^{tree}` fails on us and produces no output on
stdout, we will substitute that empty string and execute `git tag
ninth-unsigned`, i.e., we will tag HEAD rather than a newly created
object. But we are lucky: we have a signature on HEAD, so we should
eventually fail the next test, where we verify that "ninth-unsigned" is
indeed unsigned.
We have a similar problem a few lines later. If `git commit-tree -S`
fails with no output, we will happily tag HEAD as "tenth-signed". Here,
we are not so lucky. The tag ends up on the same commit as
"eighth-signed-alt", and that's a signed commit, so t7510-signed-commit
will pass, despite `git commit-tree -S` failing.
Make these `git commit-tree` invocations a direct part of the &&-chain,
so that we can rely less on luck and set a better example for future
tests modeled after this one. Fix a 9/10 copy/paste error while at it.
Signed-off-by: Martin Ågren <martin.agren@gmail.com> Signed-off-by: Brandon Richardson <brandon1024.br@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git gc" and "git repack" did not close the open packfiles that
they found unneeded before removing them, which didn't work on a
platform incapable of removing an open file. This has been
corrected.
* js/gc-repack-close-before-remove:
gc/repack: release packs when needed
The "--format=<placeholder>" option of for-each-ref, branch and tag
learned to show a few more traits of objects that can be learned by
the object_info API.
* ot/ref-filter-object-info:
ref-filter: give uintmax_t to format with %PRIuMAX
ref-filter: add docs for new options
ref-filter: add tests for deltabase
ref-filter: add deltabase option
ref-filter: add tests for objectsize:disk
ref-filter: add check for negative file size
ref-filter: add objectsize:disk option
Flaky tests can now be repeatedly run under load with the
"--stress" option.
* sg/stress-test:
test-lib: add the '--stress' option to run a test repeatedly under load
test-lib-functions: introduce the 'test_set_port' helper function
test-lib: set $TRASH_DIRECTORY earlier
test-lib: consolidate naming of test-results paths
test-lib: parse command line options earlier
test-lib: parse options in a for loop to keep $@ intact
test-lib: extract Bash version check for '-x' tracing
test-lib: translate SIGTERM and SIGHUP to an exit
The loose object cache used to optimize existence look-up has been
updated.
* rs/loose-object-cache-perffix:
object-store: retire odb_load_loose_cache()
object-store: use one oid_array per subdirectory for loose cache
object-store: factor out odb_clear_loose_cache()
object-store: factor out odb_loose_cache()
Earlier we added "-Wformat-security" to developer builds, assuming
that "-Wall" (which includes "-Wformat" which in turn is required
to use "-Wformat-security") is always in effect. This is not true
when config.mak.autogen is in use, unfortunately. This has been
fixed by unconditionally adding "-Wall" to developer builds.
* jk/dev-build-format-security:
config.mak.dev: add -Wall, primarily for -Wformat, to help autoconf users
"git cherry-pick -m1" was forbidden when picking a non-merge
commit, even though there _is_ parent number 1 for such a commit.
This was done to avoid mistakes back when "cherry-pick" was about
picking a single commit, but is no longer useful with "cherry-pick"
that can pick a range of commits. Now the "-m$num" option is
allowed when picking any commit, as long as $num names an existing
parent of the commit.
Technically this is a backward incompatible change; hopefully
nobody is relying on the error-checking behaviour.
* so/cherry-pick-always-allow-m1:
t3506: validate '-m 1 -ff' is now accepted for non-merge commits
t3502: validate '-m 1' argument is now accepted for non-merge commits
cherry-pick: do not error on non-merge commits when '-m 1' is specified
t3510: stop using '-m 1' to force failure mid-sequence of cherry-picks
"git worktree remove" and "git worktree move" refused to work when
there is a submodule involved. This has been loosened to ignore
uninitialized submodules.
* nd/worktree-remove-with-uninitialized-submodules:
worktree: allow to (re)move worktrees with uninitialized submodules
The test suite tried to see if it is run under bash, but the check
itself failed under some other implementations of shell (notably
under NetBSD). This has been corrected.
* sg/test-bash-version-fix:
test-lib: check Bash version for '-x' without using shell arrays
* rb/hpe:
compat/regex/regcomp.c: define intptr_t and uintptr_t on NonStop
git-compat-util.h: add FLOSS headers for HPE NonStop
config.mak.uname: support for modern HPE NonStop config.
transport-helper: drop read/write errno checks
transport-helper: use xread instead of read
With zsh, "git cmd path<TAB>" was completed to "git cmd path name"
when the completed path has a special character like SP in it,
without any attempt to keep "path name" a single filename. This
has been fixed to complete it to "git cmd path\ name" just like
Bash completion does.
* cy/zsh-completion-SP-in-path:
completion: treat results of git ls-tree as file paths
zsh: complete unquoted paths with spaces correctly
The core.worktree setting in a submodule repository should not be
pointing at a directory when the submodule loses its working tree
(e.g. getting deinit'ed), but the code did not properly maintain
this invariant.
* sb/submodule-unset-core-worktree-when-worktree-is-lost:
submodule deinit: unset core.worktree
submodule--helper: fix BUG message in ensure_core_worktree
submodule: unset core.worktree if no working tree is present
submodule update: add regression test with old style setups
"git log -G<regex>" looked for a hunk in the "git log -p" patch
output that contained a string that matches the given pattern.
Optimize this code to ignore binary files, which by default will
not show any hunk that would match any pattern (unless textconv or
the --text option is in effect, that is).
Lines that begin with a certain keyword that come over the wire, as
well as lines that consist only of one of these keywords, ought to
be painted in color for easier eyeballing, but the latter was
broken ever since the feature was introduced in 2.19, which has
been corrected.
* hn/highlight-sideband-keywords:
sideband: color lines with keyword only
"git checkout [<tree-ish>] path..." learned to report the number of
paths that have been checked out of the index or the tree-ish,
which gives it the same degree of noisy-ness as the case in which
the command checks out a branch.
* nd/checkout-noisy:
t0027: squelch checkout path run outside test_expect_* block
checkout: print something when checking out paths
The traversal over tree objects has learned to honor
":(attr:label)" pathspec match, which has been implemented only for
enumerating paths on the filesystem.
* nd/attr-pathspec-in-tree-walk:
tree-walk: support :(attr) matching
dir.c: move, rename and export match_attrs()
pathspec.h: clean up "extern" in function declarations
tree-walk.c: make tree_entry_interesting() take an index
tree.c: make read_tree*() take 'struct repository *'
"git rev-list --exclude-promisor-objects" had to take an object
that does not exist locally (and is lazily available) from the
command line without barfing, but the code dereferenced NULL.
* md/list-lazy-objects-fix:
list-objects.c: don't segfault for missing cmdline objects
On Windows, files cannot be removed nor renamed if there are still
handles held by a process. To remedy that, we introduced the
close_all_packs() function.
Earlier, we made sure that the packs are released just before `git gc`
is spawned, in case that gc wants to remove no-longer needed packs.
But this developer forgot that gc itself also needs to let go of packs,
e.g. when consolidating all packs via the --aggressive option.
Likewise, `git repack -d` wants to delete obsolete packs and therefore
needs to close all pack handles, too.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Reported-by: Stefan Haller <stefan@haller-berlin.de> Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Inline odb_load_loose_cache() into its only remaining caller,
odb_loose_cache(). The latter offers a nicer interface for loading the
cache, as it doesn't require callers to deal with fanout directory
numbers directly.
Signed-off-by: Rene Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
object-store: use one oid_array per subdirectory for loose cache
The loose objects cache is filled one subdirectory at a time as needed.
It is stored in an oid_array, which has to be resorted after each add
operation. So when querying a wide range of objects, the partially
filled array needs to be resorted up to 255 times, which takes over 100
times longer than sorting once.
Use one oid_array for each subdirectory. This ensures that entries have
to only be sorted a single time. It also avoids eight binary search
steps for each cache lookup as a small bonus.
The cache is used for collision checks for the log placeholders %h, %t
and %p, and we can see the change speeding them up in a repository with
ca. 100 objects per subdirectory:
Add and use a function for loading the entries of a loose object
subdirectory for a given object ID. It frees callers from deriving the
fanout key; they can use the returned oid_array reference for lookups or
forward range scans.
Suggested-by: Jeff King <peff@peff.net> Signed-off-by: Rene Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-am has the --keep-non-patch option to pass -b to
git-mailinfo for keeping subject prefixes intact. Allow
this option to be used with quiltimport as well.
Signed-off-by: Laura Abbott <labbott@redhat.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-p4: fix problem when p4 login is not necessary
In a perforce setup where login is not required, communication fails
because p4_check_access does not understand the response from the p4
client. Fixed by detecting and ignoring the "info" response.
Signed-off-by: Peter Osterlund <peterosterlund2@gmail.com> Acked-by: Luke Diamand <luke@diamand.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
worktree: allow to (re)move worktrees with uninitialized submodules
Uninitialized submodules have nothing valueable for us to be worried
about. They are just SHA-1. Let "worktree remove" and "worktree move"
continue in this case so that people can still use multiple worktrees
on repos with optional submodules that are never populated, like
sha1collisiondetection in git.git when checked out by doc-diff script.
Note that for "worktree remove", it is possible that a user
initializes a submodule (*), makes some commits (but not push), then
deinitializes it. At that point, the submodule is unpopulated, but the
precious new commits are still in
directory and we should not allow removing the worktree or we lose
those commits forever. The new directory check is added to prevent
this.
(*) yes they are screwed anyway by doing this since "git submodule"
would add submodule.* in $GIT_COMMON_DIR/config, which is shared
across multiple worktrees. But it does not mean we let them be
screwed even more.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
test-lib: add the '--stress' option to run a test repeatedly under load
Unfortunately, we have a few flaky tests, whose failures tend to be
hard to reproduce. We've found that the best we can do to reproduce
such a failure is to run the test script repeatedly while the machine
is under load, and wait in the hope that the load creates enough
variance in the timing of the test's commands that a failure is
evenually triggered. I have a command to do that, and I noticed that
two other contributors have rolled their own scripts to do the same,
all choosing slightly different approaches.
To help reproduce failures in flaky tests, introduce the '--stress'
option to run a test script repeatedly in multiple parallel jobs until
one of them fails, thereby using the test script itself to increase
the load on the machine.
The number of parallel jobs is determined by, in order of precedence:
the number specified as '--stress=<N>', or the value of the
GIT_TEST_STRESS_LOAD environment variable, or twice the number of
available processors (as reported by the 'getconf' utility), or 8.
Make '--stress' imply '--verbose -x --immediate' to get the most
information about rare failures; there is really no point in spending
all the extra effort to reproduce such a failure, and then not know
which command failed and why.
To prevent the several parallel invocations of the same test from
interfering with each other:
- Include the parallel job's number in the name of the trash
directory and the various output files under 't/test-results/' as
a '.stress-<Nr>' suffix.
- Add the parallel job's number to the port number specified by the
user or to the test number, so even tests involving daemons
listening on a TCP socket can be stressed.
- Redirect each parallel test run's verbose output to
't/test-results/$TEST_NAME.stress-<nr>.out', because dumping the
output of several parallel running tests to the terminal would
create a big ugly mess.
For convenience, print the output of the failed test job at the end,
and rename its trash directory to end with the '.stress-failed'
suffix, so it's easy to find in a predictable path (OTOH, all absolute
paths recorded in the trash directory become invalid; we'll see
whether this causes any issues in practice). If, in an unlikely case,
more than one jobs were to fail nearly at the same time, then print
the output of all failed jobs, and rename the trash directory of only
the last one (i.e. with the highest job number), as it is the trash
directory of the test whose output will be at the bottom of the user's
terminal.
Based on Jeff King's 'stress' script.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
test-lib-functions: introduce the 'test_set_port' helper function
Several test scripts run daemons like 'git-daemon' or Apache, and
communicate with them through TCP sockets. To have unique ports where
these daemons are accessible, the ports are usually the number of the
corresponding test scripts, unless the user overrides them via
environment variables, and thus all those tests and test libs contain
more or less the same bit of one-liner boilerplate code to find out
the port. The last patch in this series will make this a bit more
complicated.
Factor out finding the port for a daemon into the common helper
function 'test_set_port' to avoid repeating ourselves.
Take special care of test scripts with "low" numbers:
- Test numbers below 1024 would result in a port that's only usable
as root, so set their port to '10000 + test-nr' to make sure it
doesn't interfere with other tests in the test suite. This makes
the hardcoded port number in 't0410-partial-clone.sh' unnecessary,
remove it.
- The shell's arithmetic evaluation interprets numbers with leading
zeros as octal values, which means that test number below 1000 and
containing the digits 8 or 9 will trigger an error. Remove all
leading zeros from the test numbers to prevent this.
Note that the 'git p4' tests are unlike the other tests involving
daemons in that:
- 'lib-git-p4.sh' doesn't use the test's number for unique port as
is, but does a bit of additional arithmetic on top [1].
- The port is not overridable via an environment variable.
With this patch even 'git p4' tests will use the test's number as
default port, and it will be overridable via the P4DPORT environment
variable.
[1] Commit fc00233071 (git-p4 tests: refactor and cleanup, 2011-08-22)
introduced that "unusual" unique port computation without
explaining why it was necessary (as opposed to simply using the
test number as is). It seems to be just unnecessary complication,
and in any case that commit came way before the "test nr as unique
port" got "standardized" for other daemons in commits c44132fcf3
(tests: auto-set git-daemon port, 2014-02-10), 3bb486e439 (tests:
auto-set LIB_HTTPD_PORT from test name, 2014-02-10), and bf9d7df950 (t/lib-git-svn.sh: improve svnserve tests with parallel
make test, 2017-12-01).
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
test-lib: consolidate naming of test-results paths
There are two places where we strip off any leading path components
and the '.sh' suffix from the test script's pathname, and there are
four places where we construct the name of the 't/test-results'
directory or the name of various test-specific files in there. The
last patch in this series will add even more.
Factor these out into helper variables to avoid repeating ourselves.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
'test-lib.sh' looks for the presence of certain options like '--tee'
and '--verbose-log', so it can execute the test script again to save
its standard output and error. It looks for '--valgrind' as well, to
set up some Valgrind-specific stuff. These all happen before the
actual option parsing loop, and the conditions looking for these
options look a bit odd, too. They are not completely correct, either,
because in a bogus invocation like './t1234-foo.sh -r --tee' they
recognize '--tee', although it should be handled as the required
argument of the '-r' option. This patch series will add two more
options to look out for early, and, in addition, will have to extract
these options' stuck arguments (i.e. '--opt=arg') as well.
So let's move the option parsing loop and the couple of related
conditions following it earlier in 'test-lib.sh', before the place
where the test script is executed again for '--tee' and its friends.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
test-lib: parse options in a for loop to keep $@ intact
'test-lib.sh' looks for the presence of certain options like '--tee'
and '--verbose-log', so it can execute the test script again to save
its standard output and error, and to do so it needs the original
command line options the test was invoked with.
The next patch is about to move the option parsing loop earlier in
'test-lib.sh', but it is implemented using 'shift' in a while loop,
effecively destroying "$@" by the end of the option parsing. Not
good.
As a preparatory step, turn that option parsing loop into a 'for opt
in "$@"' loop to preserve "$@" intact while iterating over the
options, and taking extra care to handle the '-r' option's required
argument (or the lack thereof).
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
test-lib: extract Bash version check for '-x' tracing
One of our test scripts, 't1510-repo-setup.sh' [1], still can't be
reliably run with '-x' tracing enabled, unless it's executed with a
Bash version supporting BASH_XTRACEFD (since v4.1). We have a lengthy
condition to check the version of the shell running the test script,
and disable tracing if it's not executed with a suitable Bash version
[2].
Move this check out from the option parsing loop, so other options can
imply '-x' by setting 'trace=t', without missing this Bash version
check.
[1] 5827506928 (t1510-repo-setup: mark as untraceable with '-x',
2018-02-24)
[2] 5fc98e79fc (t: add means to disable '-x' tracing for individual
test scripts, 2018-02-24)
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
config.mak.dev: add -Wall, primarily for -Wformat, to help autoconf users
801fa63a90 ("config.mak.dev: add -Wformat-security", 2018-09-08)
added the "-Wformat-security" to the flags set in config.mak.dev.
In the gcc man page this is documented as:
If -Wformat is specified, also warn about uses of format
functions that represent possible security problems. [...]
The commit did however not add the "-Wformat" flag, but instead
relied on the fact that "-Wall" is set in the Makefile by default
and that "-Wformat" is part of "-Wall".
Unfortunately, those who use config.mak.autogen generated with the
autoconf to configure toolchain do *not* get "-Wall" in their CFLAGS
and the added -Wformat-security had no effect. Worse yet, newer
versions of gcc (gcc 8.2.1 in this particular case) warn about the
lack of "-Wformat" and thus compilation fails only with this option
set.
We could fix it by adding "-Wformat", but in general we do want all
checks included in "-Wall", so let's add it to config.mak.dev to
cover more cases.
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com> Helped-by: Jeff King <peff@peff.net> Helped-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
sha1-file: close fd of empty file in map_sha1_file_1()
map_sha1_file_1() checks if the file it is about to mmap() is empty and
errors out in that case and explains the situation in an error message.
It leaks the private handle to that empty file, though.
Have the function clean up after itself and close the file descriptor
before exiting early.
Signed-off-by: Rene Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
This reverts commit 314a73d658 (t/lib-git-daemon: record daemon log,
2018-01-25), which let tests use the output of git-daemon.
The previous commit removed the last user of deamon.log in the tests,
there's no good way to make checking for output in the log
race-proof. Revert this commit as well, to make sure others are not
tempted to use daemon.log in tests in the future, which would lead to
racy tests.
The original commit had one change that still makes sense, namely
switching read/echo for "read -r" and "printf", which relays the data
more faithfully. Don't revert that piece here, as it is still a
useful change.
Suggested-by: Jeff King <peff@peff.net> Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The http-backend CGI process did not correctly clean up the child
processes it spawns to run upload-pack etc. when it dies itself,
which has been corrected.
* mk/http-backend-kill-children-before-exit:
http-backend: enable cleaning up forked upload/receive-pack on exit
A properly configured username/email is required under
user.useConfigOnly in order to create commits; now "git stash"
(even though it creates commit objects to represent stash entries)
command is exempt from the requirement.
* sd/stash-wo-user-name:
stash: tolerate missing user identity
Refspecs configured with "git -c var=val clone" did not propagate
to the resulting repository, which has been corrected.
* sg/clone-initial-fetch-configuration:
Documentation/clone: document ignored configuration variables
clone: respect additional configured fetch refspecs during initial fetch
clone: use a more appropriate variable name for the default refspec
"git checkout frotz" (without any double-dash) avoids ambiguity by
making sure 'frotz' cannot be interpreted as a revision and as a
path at the same time. This safety has been updated to check also
a unique remote-tracking branch 'frotz' in a remote, when dwimming
to create a local branch 'frotz' out of a remote-tracking branch
'frotz' from a remote.
* nd/checkout-dwim-fix:
checkout: disambiguate dwim tracking branches and local files
"git push $there $src:$dst" rejects when $dst is not a fully
qualified refname and not clear what the end user meant. The
codepath has been taught to give a clearer error message, and also
guess where the push should go by taking the type of the pushed
object into account (e.g. a tag object would want to go under
refs/tags/).
* ab/push-dwim-dst:
push doc: document the DWYM behavior pushing to unqualified <dst>
push: test that <src> doesn't DWYM if <dst> is unqualified
push: add an advice on unqualified <dst> push
push: move unqualified refname error into a function
push: improve the error shown on unqualified <dst> push
i18n: remote.c: mark error(...) messages for translation
remote.c: add braces in anticipation of a follow-up change
Small fixes and features for fast-export and fast-import, mostly on
the fast-export side.
* en/fast-export-import:
fast-export: add a --show-original-ids option to show original names
fast-import: remove unmaintained duplicate documentation
fast-export: add --reference-excluded-parents option
fast-export: ensure we export requested refs
fast-export: when using paths, avoid corrupt stream with non-existent mark
fast-export: move commit rewriting logic into a function for reuse
fast-export: avoid dying when filtering by paths and old tags exist
fast-export: use value from correct enum
git-fast-export.txt: clarify misleading documentation about rev-list args
git-fast-import.txt: fix documentation for --quiet option
fast-export: convert sha1 to oid
Code clean-up with optimization for the codepath that checks
(non-)existence of loose objects.
* jk/loose-object-cache:
odb_load_loose_cache: fix strbuf leak
fetch-pack: drop custom loose object cache
sha1-file: use loose object cache for quick existence check
object-store: provide helpers for loose_objects_cache
sha1-file: use an object_directory for the main object dir
handle alternates paths the same as the main object dir
sha1_file_name(): overwrite buffer instead of appending
rename "alternate_object_database" to "object_directory"
submodule--helper: prefer strip_suffix() to ends_with()
fsck: do not reuse child_process structs
The "http.version" configuration variable can be used with recent
enough cURL library to force the version of HTTP used to talk when
fetching and pushing.
* fc/http-version:
http: add support selecting http version
* nd/i18n:
fsck: mark strings for translation
fsck: reduce word legos to help i18n
parse-options.c: mark more strings for translation
parse-options.c: turn some die() to BUG()
parse-options: replace opterror() with optname()
repack: mark more strings for translation
remote.c: mark messages for translation
remote.c: turn some error() or die() to BUG()
reflog: mark strings for translation
read-cache.c: add missing colon separators
read-cache.c: mark more strings for translation
read-cache.c: turn die("internal error") to BUG()
attr.c: mark more string for translation
archive.c: mark more strings for translation
alias.c: mark split_cmdline_strerror() strings for translation
git.c: mark more strings for translation
Right now if a test script receives SIGTERM or SIGHUP (e.g., because a
test was hanging and the user 'kill'-ed it or simply closed the
terminal window the test was running in), the shell exits immediately.
This can be annoying if the test script did any global setup, like
starting apache or git-daemon, as it will not have an opportunity to
clean up after itself. A subsequent run of the test won't be able to
start its own daemon, and will either fail or skip the tests.
Instead, let's trap SIGTERM and SIGHUP as well to make sure we do a
clean shutdown, and just chain it to a normal exit (which will trigger
any cleanup).
This patch follows suit of da706545f7 (t: translate SIGINT to an exit,
2015-03-13), and even stole its commit message as well.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
compat/regex/regcomp.c: define intptr_t and uintptr_t on NonStop
The system definition header files on HPE NonStop do not define
intptr_t and uintptr_t as do other platforms. These typedefs
are added specifically wrapped in a __TANDEM ifdef.
Signed-off-by: Randall S. Becker <rsbecker@nexbridge.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-compat-util.h: add FLOSS headers for HPE NonStop
The HPE NonStop (a.k.a. __TANDEM) platform cannot build git without
using the FLOSS package supplied by HPE. The convenient location
for including the relevant headers is in this file.
The NSIG define is also not defined on __TANDEM, so we define it
here as 100 if it is not defined only for __TANDEM builds.
Signed-off-by: Randall S. Becker <rsbecker@nexbridge.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
config.mak.uname: support for modern HPE NonStop config.
A number of configuration options are not automatically detected by
configure mechanisms, including the location of Perl and Python.
There was a problem at a specific set of operating system versions
that caused getopt to have compile errors. Account for this by
providing emulation defines for those versions.
Signed-off-by: Randall S. Becker <rsbecker@nexbridge.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since we use xread() and xwrite() here, EINTR, EAGAIN, and
EWOULDBLOCK retries are already handled for us, and we will
never see these errno values ourselves. We can drop these
conditions entirely, making the code easier to follow.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
This fix was needed on HPE NonStop NSE and NSX where SSIZE_MAX is less than
BUFFERSIZE resulting in EINVAL. The call to read in transport-helper.c
was the only place outside of wrapper.c where it is used instead of xread.
Signed-off-by: Randall S. Becker <rsbecker@nexbridge.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
test-lib: check Bash version for '-x' without using shell arrays
One of our test scripts, 't1510-repo-setup.sh' [1], still can't be
reliably run with '-x' tracing enabled, unless it's executed with a
Bash version supporting BASH_XTRACEFD (since v4.1). We have a lengthy
condition to check the version of the shell running the test script,
and disable tracing if it's not executed with a suitable Bash version
[2].
This condition uses non-portable shell array accesses to easily get
Bash's major and minor version number. This didn't seem to be
problematic, because the simple commands expanding those array
accesses are only executed when the test script is actually run with
Bash. When run with Dash, the only shell I have at hand that doesn't
support shell arrays, there are no issues, as it apparently skips
right over the non-executed simple commands without noticing the
non-supported constructs.
Alas, it has been reported that NetBSD's /bin/sh does complain about
them:
./test-lib.sh: 327: Syntax error: Bad substitution
where line 327 contains the first ${BASH_VERSINFO[0]} array access.
To my understanding both shells are right and conform to POSIX,
because the standard allows both behaviors by stating the following
under '2.8.1 Consequences of Shell Errors' [3]:
"An expansion error is one that occurs when the shell expansions
define in wordexp are carried out (for example, "${x!y}", because
'!' is not a valid operator); an implementation may treat these as
syntax errors if it is able to detect them during tokenization,
rather than during expansion."
Avoid this issue with NetBSD's /bin/sh (and potentially with other,
less common shells) by hiding the shell array syntax behind 'eval'
that is only executed with Bash.
[1] 5827506928 (t1510-repo-setup: mark as untraceable with '-x',
2018-02-24)
[2] 5fc98e79fc (t: add means to disable '-x' tracing for individual
test scripts, 2018-02-24)
[3] http://pubs.opengroup.org/onlinepubs/9699919799/utilities/V3_chap02.html#tag_18_08_01
Reported-by: Max Kirillov <max@max630.net> Helped-by: Johannes Sixt <j6t@kdbg.org> Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
completion: treat results of git ls-tree as file paths
Let's say there are files named 'foo bar.txt', and 'abc def/test.txt' in
repository. When following commands trigger a completion:
git show HEAD:fo<Tab>
git show HEAD:ab<Tab>
The completion results in bash/zsh:
git show HEAD:foo bar.txt
git show HEAD:abc def/
Where the both of them have an unescaped space in paths, so they'll be
misread by git. All entries of git ls-tree either a filename or a
directory, so __gitcomp_file() is proper rather than __gitcomp_nl().
Note the commit f12785a3, which handles quoted paths properly. Like this
case, we should dequote $cur_ for ?*:* case. For example, let's say
there is untracked directory 'abc deg', then trigger a completion:
git show HEAD:abc\ de<Tab>
git show HEAD:'abc de<Tab>
git show HEAD:"abc de<Tab>
should uniquely complete 'abc def', but bash completes 'abc def' and
'abc deg' instead. In zsh, triggering a completion:
git show HEAD:abc\ def/<Tab>
should complete 'test.txt', but nothing comes. The both problems will be
resolved by dequoting paths.
__git_complete_revlist_file() passes arguments to __gitcomp_nl() where
the first one is a list something like:
abc def/Z
foo bar.txt Z
where Z is the mark of the EOL.
- The trailing space of blob in __git ls-tree | sed.
It makes the completion results become:
git show HEAD:foo\ bar.txt\ <CURSOR>
So git will try to find a file named 'foo bar.txt ' instead.
- The trailing slash of tree in __git ls-tree | sed.
It makes the completion results on zsh become:
git show HEAD:abc\ def/ <CURSOR>
So that the last space on command like should be removed on zsh to
complete filenames under 'abc def/'.
Signed-off-by: Chayoung You <yousbe@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
zsh: complete unquoted paths with spaces correctly
The following is the description of -Q flag of zsh compadd [1]:
This flag instructs the completion code not to quote any
metacharacters in the words when inserting them into the command
line.
Let's say there is a file named 'foo bar.txt' in repository, but it's
not yet added to the repository. Then the following command triggers a
completion:
The first one, where the pathname is not enclosed in quotes, should
escape the space with a backslash, just like bash completion does.
Otherwise, this leads git to think there are two files; foo, and
bar.txt.
The main cause of this behavior is __gitcomp_file_direct(). The both
implementions of bash and zsh are called with an argument 'foo bar.txt',
but only bash adds a backslash before a space on command line.
Simplify handling of setup_git_directory_gently() failure cases.
setup_git_directory_gently() expects two types of failures to
discover a git directory (e.g. .git/):
- GIT_DIR_HIT_CEILING: could not find a git directory in any
parent directories of the cwd.
- GIT_DIR_HIT_MOUNT_POINT: could not find a git directory in
any parent directories up to the mount point of the cwd.
Both cases are handled in a similar way, but there are misleading
and unimportant differences. In both cases, setup_git_directory_gently()
should:
- Die if we are not in a git repository. Otherwise:
- Set nongit_ok = 1, indicating that we are not in a git repository
but this is ok.
- Call strbuf_release() on any non-static struct strbufs that we
allocated.
Before this change are two misleading additional behaviors:
- GIT_DIR_HIT_CEILING: setup_nongit() changes to the cwd for no
apparent reason. We never had the chance to change directories
up to this point so chdir(current cwd) is pointless.
- GIT_DIR_HIT_MOUNT_POINT: strbuf_release() frees the buffer
of a static struct strbuf (cwd). This is unnecessary because the
struct is static so its buffer is always reachable. This is also
misleading because nowhere else in the function is this buffer
released.
This change eliminates these two misleading additional behaviors and
deletes setup_nogit() because the code is clearer without it. The
result is that we can see clearly that GIT_DIR_HIT_CEILING and
GIT_DIR_HIT_MOUNT_POINT lead to the same behavior (ignoring the
different help messages).
During review, this change was amended to additionally include:
- Neither GIT_DIR_HIT_CEILING nor GIT_DIR_HIT_MOUNT_POINT may
return early from setup_git_directory_gently() before the
GIT_PREFIX environment variable is reset. Change both cases to
break instead of return. See GIT_PREFIX below for more details.
- GIT_DIR_NONE: setup_git_directory_gently_1() never returns this
value, but if it ever did, setup_git_directory_gently() would
incorrectly record that it had found a repository. Explicitly
BUG on this case because it is underspecified.
- GIT_PREFIX: this environment variable must always match the
value of startup_info->prefix and the prefix returned from
setup_git_directory_gently(). Make how we handle this slightly
more repetitive but also more clear.
- setup_git_env() and repo_set_hash_algo(): Add comments showing
that only GIT_DIR_EXPLICIT, GIT_DIR_DISCOVERED, and GIT_DIR_BARE
will cause setup_git_directory_gently() to call these setup
functions. This was obvious (but partly incorrect) before this
change when GIT_DIR_HIT_MOUNT_POINT returned early from
setup_git_directory_gently().
When writing a commit-graph, we write GRAPH_MISSING_PARENT if the
parent's object id does not appear in the list of commits to be
written into the commit-graph. This was done as the initial design
allowed commits to have missing parents, but the final version
requires the commit-graph to be closed under reachability. Thus,
this GRAPH_MISSING_PARENT value should never be written.
However, there are reasons why it could be written! These range
from a bug in the reachable-closure code to a memory error causing
the binary search into the list of object ids to fail. In either
case, we should fail fast and avoid writing the commit-graph file
with bad data.
Remove the GRAPH_MISSING_PARENT constant in favor of the constant
GRAPH_EDGE_LAST_MASK, which has the same value.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
strncat() has the same quadratic behavior as strcat() and is
difficult-to-read and bug-prone. While it hasn't yet been a
problem in git iself, strncat() found it's way into 'master'
of cgit and caused segfaults on my system.
Signed-off-by: Eric Wong <e@80x24.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
doc/config: do a better job of introducing 'worktree.guessRemote'
The documentation for this option jumps right in with "With `add`",
without explaining that `add` is a sub-command of "git worktree".
Together with rather odd grammatical structure of the remainder of the
sentence, the description can be difficult for newcomers to understand.
Clarify by improving the grammar and mentioning "git worktree add"
explicitly.
Reported-by: Олег Самойлов <splarv@ya.ru> Signed-off-by: Eric Sunshine <sunshine@sunshineco.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>