Serving objects from a shallow repository needs to write a
temporary file to be used, but the serving upload-pack may not have
write access to the repository which is meant to be read-only.
Instead feed these temporary shallow bounds from the standard input
of pack-objects so that we do not have to use a temporary file.
* nd/upload-pack-shallow:
upload-pack: send shallow info over stdin to pack-objects
Unify the codepaths that format new/modified/changed sections and
conflicted paths in the "git status" output and make it possible to
properly internationalize their output.
* jn/wt-status:
wt-status: lift the artificual "at least 20 columns" floor
wt-status: i18n of section labels
wt-status: extract the code to compute width for labels
wt-status: make full label string to be subject to l10n
Update implementation of skip_prefix() to scan only once; given
that most "prefix" arguments to the inline function are constant
strings whose strlen() can be determined at the compile time, this
might actually make things worse with a compiler with sufficient
intelligence.
* dk/skip-prefix-scan-only-once:
skip_prefix(): scan prefix only once
Serving objects from a shallow repository needs to write a
new file to hold the temporary shallow boundaries but it was not
cleaned when we exit due to die() or a signal.
* jk/shallow-update-fix:
shallow: verify shallow file after taking lock
shallow: automatically clean up shallow tempfiles
shallow: use stat_validity to check for up-to-date file
The version numbering scheme has changed since Git 1.9 and we
dropped the third dewey-decimal from the traditional numbering
(e.g. both 1.8.4 and 1.8.5 were major feature releases). This
release 1.9.1 is the first maintenance relase for Git 1.9.
"git difftool" misbehaved when the repository is bound to the
working tree with the ".git file" mechanism, where a textual file
".git" tells us where it is.
* da/difftool-git-files:
t7800: add a difftool test for .git-files
difftool: support repositories with .git-files
Merge branch 'jk/remote-pushremote-config-reading' into maint
"git push" did not pay attention to branch.*.pushremote if it is
defined earlier than remote.pushdefault; the order of these two
variables in the configuration file should not matter, but it did by
mistake.
* jk/remote-pushremote-config-reading:
remote: handle pushremote config in any order
Merge branch 'jk/commit-dates-parsing-fix' into maint
Codepaths that parse timestamps in commit objects have been
tightened.
* jk/commit-dates-parsing-fix:
show_ident_date: fix tz range check
log: do not segfault on gmtime errors
log: handle integer overflow in timestamps
date: check date overflow against time_t
fsck: report integer overflow in author timestamps
t4212: test bogus timestamps with git-log
Merge branch 'tr/diff-submodule-no-reuse-worktree' into maint
"git diff --external-diff" incorrectly fed the submodule directory
in the working tree to the external diff driver when it knew it is
the same as one of the versions being compared.
* tr/diff-submodule-no-reuse-worktree:
diff: do not reuse_worktree_file for submodules
"git reset" needs to refresh the index when working in a working
tree (it can also be used to match the index to the HEAD in an
otherwise bare repository), but it failed to set up the working
tree properly, causing GIT_WORK_TREE to be ignored.
* nd/reset-setup-worktree:
reset: optionally setup worktree and refresh index on --mixed
Merge branch 'jc/check-attr-honor-working-tree' into maint
"git check-attr" when working on a repository with a working tree
did not work well when the working tree was specified via the
--work-tree (and obviously with --git-dir) option.
* jc/check-attr-honor-working-tree:
check-attr: move to the top of working tree when in non-bare repository
t0003: do not chdir the whole test process
Merge branch 'bk/refresh-missing-ok-in-merge-recursive' into maint
"merge-recursive" was broken in 1.7.7 era and stopped working in an
empty (temporary) working tree, when there are renames involved.
This has been corrected.
* bk/refresh-missing-ok-in-merge-recursive:
merge-recursive.c: tolerate missing files while refreshing index
read-cache.c: extend make_cache_entry refresh flag with options
read-cache.c: refactor --ignore-missing implementation
t3030-merge-recursive: test known breakage with empty work tree
Merge branch 'jk/config-path-include-fix' into maint
include.path variable (or any variable that expects a path that can
use ~username expansion) in the configuration file is not a boolean,
but the code failed to check it.
* jk/config-path-include-fix:
handle_path_include: don't look at NULL value
expand_user_path: do not look at NULL path
Merge branch 'nd/http-fetch-shallow-fix' into maint
Attempting to deepen a shallow repository by fetching over smart
HTTP transport failed in the protocol exchange, when no-done
extension was used. The fetching side waited for the list of
shallow boundary commits after the sending end stopped talking to
it.
* nd/http-fetch-shallow-fix:
t5537: move http tests out to t5539
fetch-pack: fix deepen shallow over smart http with no-done cap
protocol-capabilities.txt: document no-done
protocol-capabilities.txt: refer multi_ack_detailed back to pack-protocol.txt
pack-protocol.txt: clarify 'obj-id' in the last ACK after 'done'
test: rename http fetch and push test files
tests: auto-set LIB_HTTPD_PORT from test name
Merge branch 'nd/submodule-pathspec-ending-with-slash' into maint
Allow "git cmd path/", when the 'path' is where a submodule is
bound to the top-level working tree, to match 'path', despite the
extra and unnecessary trailing slash (such a slash is often
given by command line completion).
* nd/submodule-pathspec-ending-with-slash:
clean: use cache_name_is_other()
clean: replace match_pathspec() with dir_path_match()
pathspec: pass directory indicator to match_pathspec_item()
match_pathspec: match pathspec "foo/" against directory "foo"
dir.c: prepare match_pathspec_item for taking more flags
pathspec: rename match_pathspec_depth() to match_pathspec()
pathspec: convert some match_pathspec_depth() to dir_path_match()
pathspec: convert some match_pathspec_depth() to ce_path_match()
* mh/simplify-cache-tree-find:
cache_tree_find(): use path variable when passing over slashes
cache_tree_find(): remove early return
cache_tree_find(): remove redundant check
cache_tree_find(): fix comment formatting
cache_tree_find(): find the end of path component using strchrnul()
cache_tree_find(): remove redundant checks
* jk/detect-push-typo-early:
push: detect local refspec errors early
match_explicit_lhs: allow a "verify only" mode
match_explicit: hoist refspec lhs checks into their own function
Replace open-coded reallocation with ALLOC_GROW() macro.
* dd/use-alloc-grow:
sha1_file.c: use ALLOC_GROW() in pretend_sha1_file()
read-cache.c: use ALLOC_GROW() in add_index_entry()
builtin/mktree.c: use ALLOC_GROW() in append_to_tree()
attr.c: use ALLOC_GROW() in handle_attr_line()
dir.c: use ALLOC_GROW() in create_simplify()
reflog-walk.c: use ALLOC_GROW()
replace_object.c: use ALLOC_GROW() in register_replace_object()
patch-ids.c: use ALLOC_GROW() in add_commit()
diffcore-rename.c: use ALLOC_GROW()
diff.c: use ALLOC_GROW()
commit.c: use ALLOC_GROW() in register_commit_graft()
cache-tree.c: use ALLOC_GROW() in find_subtree()
bundle.c: use ALLOC_GROW() in add_to_ref_list()
builtin/pack-objects.c: use ALLOC_GROW() in check_pbase_path()
Updates transport-helper, fast-import and fast-export to allow the
ref mapping and ref deletion in a way similar to the natively
supported transports.
* fc/transport-helper-fixes:
remote-bzr: support the new 'force' option
test-hg.sh: tests are now expected to pass
transport-helper.c: do not overwrite forced bit
transport-helper: check for 'forced update' message
transport-helper: add 'force' to 'export' helpers
transport-helper: don't update refs in dry-run
transport-helper: mismerge fix
Before writing the shallow file, we stat() the existing file
to make sure it has not been updated since our operation
began. However, we do not do so under a lock, so there is a
possible race:
1. Process A takes the lock.
2. Process B calls check_shallow_file_for_update and finds
no update.
3. Process A commits the lockfile.
4. Process B takes the lock, then overwrite's process A's
changes.
We can fix this by doing our check while we hold the lock.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* sr/add--interactive-term-readkey:
git-add--interactive: warn if module for interactive.singlekey is missing
git-config: document interactive.singlekey requires Term::ReadKey
* mh/replace-refs-variable-rename:
Document some functions defined in object.c
Add docstrings for lookup_replace_object() and do_lookup_replace_object()
rename read_replace_refs to check_replace_refs
"git difftool" misbehaved when the repository is bound to the
working tree with the ".git file" mechanism, where a textual
file ".git" tells us where it is.
* da/difftool-git-files:
t7800: add a difftool test for .git-files
difftool: support repositories with .git-files
* tg/index-v4-format:
read-cache: add index.version config variable
test-lib: allow setting the index format version
introduce GIT_INDEX_VERSION environment variable
* mh/object-code-cleanup:
sha1_file.c: document a bunch of functions defined in the file
sha1_file_name(): declare to return a const string
find_pack_entry(): document last_found_pack
replace_object: use struct members instead of an array
"git push" did not pay attention to branch.*.pushremote if it is
defined earlier than remote.pushdefault; the order of these two
variables in the configuration file should not matter, but it did by
mistake.
* jk/remote-pushremote-config-reading:
remote: handle pushremote config in any order
Tighten codepaths that parse timestamps in commit objects.
* jk/commit-dates-parsing-fix:
show_ident_date: fix tz range check
log: do not segfault on gmtime errors
log: handle integer overflow in timestamps
date: check date overflow against time_t
fsck: report integer overflow in author timestamps
t4212: test bogus timestamps with git-log
"git diff --external-diff" incorrectly fed the submodule directory
in the working tree to the external diff driver when it knew it is
the same as one of the versions being compared.
* tr/diff-submodule-no-reuse-worktree:
diff: do not reuse_worktree_file for submodules
"git reset" needs to refresh the index when working in a working
tree (it can also be used to match the index to the HEAD in an
otherwise bare repository), but it failed to set up the working
tree properly, causing GIT_WORK_TREE to be ignored.
* nd/reset-setup-worktree:
reset: optionally setup worktree and refresh index on --mixed
"git config" learned to read from the standard input when "-" is
given as the value to its "--file" parameter (attempting an
operation to update the configuration in the standard input of
course is rejected).
* ks/config-file-stdin:
config: teach "git config --file -" to read from the standard input
config: change git_config_with_options() interface
builtin/config.c: rename check_blob_write() -> check_write()
config: disallow relative include paths from blobs
* jk/janitorial-fixes:
open_istream(): do not dereference NULL in the error case
builtin/mv: don't use memory after free
utf8: use correct type for values in interval table
utf8: fix iconv error detection
notes-utils: handle boolean notes.rewritemode correctly
Uses of curl's "multi" interface and "easy" interface do not mix
well when we attempt to reuse outgoing connections. Teach the RPC
over http code, used in the smart HTTP transport, not to use the
"easy" interface.
* jk/http-no-curl-easy:
http: never use curl_easy_perform
Trailing whitespaces in .gitignore files, unless they are quoted for
fnmatch(3), e.g. "path\ ", are warned and ignored.
Strictly speaking, this is a backward incompatible change, but very
unlikely to bite any sane user and adjusting should be obvious and
easy.
* nd/gitignore-trailing-whitespace:
t0008: skip trailing space test on Windows
dir: ignore trailing spaces in exclude patterns
dir: warn about trailing spaces in exclude patterns
"git check-attr" when (trying to) work on a repository with a
working tree did not work well when the working tree was specified
via --work-tree (and obviously with --git-dir).
The command also works in a bare repository but it reads from the
(possibly stale, irrelevant and/or nonexistent) index, which may
need to be fixed to read from HEAD, but that is a completely
separate issue. As a related tangent to this separate issue, we
may want to also fix "check-ignore", which refuses to work in a
bare repository, to also operate in a bare one.
* jc/check-attr-honor-working-tree:
check-attr: move to the top of working tree when in non-bare repository
t0003: do not chdir the whole test process
This static function has no callers, nor has it had any since its
introduction in ba67aaf2d05d (git-sh-i18n--envsubst: our own envsubst(1)
for eval_gettext(), 2011-05-14). Remove it.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
wt-status: lift the artificual "at least 20 columns" floor
When we show unmerged paths, we had an artificial 20 columns floor
for the width of labels (e.g. "both deleted:") shown next to the
pathnames. Depending on the locale, this may result in a label that
is too wide when all the label strings are way shorter than 20
columns, or no-op when a label string is longer than 20 columns.
Just drop the artificial floor. The screen real estate is better
utilized this way when all the strings are shorter.
(1) the number of bytes written is the width of a string, so they
can line up;
(2) the "how" string is always <= 19 bytes.
Neither of which we should assume.
Using the same approach as the earlier 3651e45c (wt-status: take the
alignment burden off translators, 2013-11-05), compute the necessary
column width to hold the longest label and use that for alignment.
cf. http://bugs.debian.org/725777
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Helped-by: Sandy Carter Signed-off-by: Junio C Hamano <gitster@pobox.com>
wt-status: make full label string to be subject to l10n
Earlier in 3651e45c (wt-status: take the alignment burden off
translators, 2013-11-05), we assumed that it is OK to make the
string before the colon in a label string we give as the section
header of various kinds of changes (e.g. "new file:") translatable.
This assumption apparently does not hold for some languages,
e.g. ones that want to have spaces around the colon.
Also introduce a static label_width to avoid having to run
strlen(padding) over and over.
Some tests in t7810-grep.sh are in a loop that runs them against HEAD and
the work tree. In order for that to work the test code should use the
variables $L (display name), $H (HEAD or empty string) and $HC (revision
prefix for result lines); otherwise tests are just repeated with the same
target. Add the variables where they're missing and make sure the test
description is wrapped in double quotes (instead of single quotes) to
allow variables to be expanded.
Signed-off-by: Rene Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
upload-pack: send shallow info over stdin to pack-objects
Before cdab485 (upload-pack: delegate rev walking in shallow fetch to
pack-objects - 2013-08-16) upload-pack does not write to the source
repository. cdab485 starts to write $GIT_DIR/shallow_XXXXXX if it's a
shallow fetch, so the source repo must be writable.
git:// servers do not need write access to repos and usually don't
have it, which means cdab485 breaks shallow clone over git://
Instead of using a temporary file as the media for shallow points, we
can send them over stdin to pack-objects as well. Prepend shallow
SHA-1 with --shallow so pack-objects knows what is what.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we get a list of paths from read_directory, we further
prune it to create the final list of items to remove. The
code paths for directories and non-directories repeat the
same "add to list" code.
This patch restructures the code so that we don't repeat
ourselves. Also, by following a "if (condition) continue"
pattern like the pathspec check above, it makes it more
obvious that the conditional is about excluding directories
under certain circumstances.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-clean uses read_directory to fill in a `struct dir` with
potential hits. However, read_directory does not actually
check against our pathspec. It uses a simplified version
that may turn up false positives. As a result, we need to
check that any hits match our pathspec. We do so reliably
for non-directories. For directories, if "-d" is not given
we check that the pathspec matched exactly (i.e., we are
even stricter, and require an explicit "git clean foo" to
clean "foo/"). But if "-d" is given, rather than relaxing
the exact match to allow a recursive match, we do not check
the pathspec at all.
This regression was introduced in 113f10f (Make git-clean a
builtin, 2007-11-11).
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Windows API does not preserve file names with trailing spaces (and
dots), but rather strips them. Our tools (MSYS bash, git) base the POSIX
emulation on the Windows API. As a consequence, it is impossible for bash
on Windows to allocate a file whose name has trailing spaces, and for git
to stat such a file. Both operate on a file whose name has the spaces
stripped. Skip the test that needs such a file name.
Note that we do not use (another incarnation of) prerequisite FUNNYNAMES.
The reason is that FUNNYNAMES is intended to represent a property of the
file system. But the inability to have trailing spaces in a file name is
a property of the Windows API. The file system (NTFS) does not have this
limitation.
Signed-off-by: Johannes Sixt <j6t@kdbg.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Just like "git branch" can be told to list the branches that has the
named commit by "git branch --with <commit>", teach the same
short-hand to "git tag", so that "git tag --with <commit>" shows the
releases with the named commit.
Commit 1dca155fe3fa (log: handle integer overflow in
timestamps, 2014-02-24) tried to catch integer overflow
coming from strtol() on the timezone field by comparing against
LONG_MIN/LONG_MAX. However, the intermediate "tz" variable
is an "int", which means it can never be LONG_MAX on LP64
systems; we would truncate the output from strtol before the
comparison.
Clang's -Wtautological-constant-out-of-range-compare notices
this and rightly complains.
Let's instead store the result of strtol in a long, and then
compare it against INT_MIN/INT_MAX. This will catch overflow
from strtol, and also overflow when we pass the result as an
int to show_date.
Reported-by: Eric Sunshine <sunshine@sunshineco.com> Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
In a bourne shell script, "VAR=VAL command" is sufficient to run
'command' with environment variable VAR set to value VAL without
affecting the environment of the shell itself; there is no need
to say "env VAR=VAL command".
We invented hashcpy() to keep the abstraction of "object name"
behind it. Use it instead of calling memcpy() with hard-coded
20-byte length when moving object names between pieces of memory.
Leave ppc/sha1.c as-is, because the function is about the SHA-1 hash
algorithm whose output is and will always be 20 bytes.
Helped-by: Michael Haggerty <mhagger@alum.mit.edu> Helped-by: Duy Nguyen <pclouds@gmail.com> Signed-off-by: Sun He <sunheehnus@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
branch: use skip_prefix() in install_branch_config()
The install_branch_config() function reimplemented the skip_prefix()
function inline.
Reported-by: Michael Haggerty <mhagger@alum.mit.edu> Signed-off-by: Brian Gesiak <modocache@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>