blame: allow to blame paths freshly added to the index
When blaming files, changes in the work tree are taken into account
and displayed as being "Not Committed Yet".
However, when blaming a file that is not known to the current HEAD,
git blame fails with `no such path 'foo' in HEAD`, even when the file
was git add'ed.
Allowing such a blame is useful when the new file added to the index
(not yet committed) was created by renaming an existing file. It
also is useful when the new file was created from pieces already in
HEAD, moved or copied from other files and blaming with copy
detection (i.e. "-C").
Signed-off-by: Mike Hommey <mh@glandium.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
cache-tree: do not generate empty trees as a result of all i-t-a subentries
If a subdirectory contains nothing but i-t-a entries, we generate an
empty tree object and add it to its parent tree. Which is wrong. Such
a subdirectory should not be added.
Note that this has a cascading effect. If subdir 'a/b/c' contains
nothing but i-t-a entries, we ignore it. But then if 'a/b' contains
only (the non-existing) 'a/b/c', then we should ignore 'a/b' while
building 'a' too. And it goes all the way up to top directory.
Noticed-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
cache-tree.c: fix i-t-a entry skipping directory updates sometimes
Commit 3cf773e (cache-tree: fix writing cache-tree when CE_REMOVE is
present - 2012-12-16) skips i-t-a entries when building trees objects
from the index. Unfortunately it may skip too much.
The code in question checks if an entry is an i-t-a one, then no tree
entry will be written. But it does not take into account that
directories can also be written with the same code. Suppose we have
this in the index.
We write an entry for a-file as normal and move on to subdir/file1,
where we realize the entry name for this level is simply just
"subdir", write down an entry for "subdir" then jump three items ahead
to the-last-file.
That is what happens normally when the first file in subdir is not an
i-t-a entry. If subdir/file1 is an i-t-a, because of the broken
condition in this code, we still think "subdir" is an i-t-a file and
not writing "subdir" down and jump to the-last-file. The result tree
now only has two items: a-file and the-last-file. subdir should be
there too (even though it only records two sub-entries, file2 and
file3).
If the i-t-a entry is subdir/file2 or subdir/file3, this is not a
problem because we jump over them anyway. Which may explain why the
bug is hidden for nearly four years.
Fix it by making sure we only skip i-t-a entries when the entry in
question is actual an index entry, not a directory.
Reported-by: Yuri Kanivetsky <yuri.kanivetsky@gmail.com> Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
We need to test linkage of pthread_create and pthread_join,
as pthread_mutex_* and pthread_key_* functions do not need
extra linkage under FreeBSD 10.3, leading to a false-positive
of the empty case.
Signed-off-by: Eric Wong <e@80x24.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
t0006: skip "far in the future" test when unsigned long is not long enough
Git's source code refers to timestamps as unsigned longs. On 32-bit
platforms, as well as on Windows, unsigned long is not large enough
to capture dates that are "absurdly far in the future".
While we can fix this issue properly by replacing unsigned long with
a larger type, we want to be a bit more conservative and just skip
those tests on the maint track.
Signed-off-by: Jeff King <peff@peff.net> Helped-by: Johannes Schindelin <Johannes.Schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
In v1.8.5 days, 7f2ea5f0 (diff: allow lowercase letter to specify
what change class to exclude, 2013-07-17) taught the "--diff-filter"
mechanism to take lowercase letters as exclusion, but we forgot to
document it.
Commit 47abd85 (fetch: Strip usernames from url's before
storing them, 2009-04-17) taught fetch to anonymize URLs.
The primary purpose there was to avoid sticking passwords in
merge-commit messages, but as a side effect, we also avoid
printing them to stderr.
The push side does not have the merge-commit problem, but it
probably should avoid printing them to stderr. We can reuse
the same anonymizing function.
Note that for this to come up, the credentials would have to
appear either on the command line or in a git config file,
neither of which is particularly secure. So people _should_
be switching to using credential helpers instead, which
makes this problem go away. But that's no excuse not to
improve the situation for people who for whatever reason end
up using credentials embedded in the URL.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
fsck: use streaming interface for large blobs in pack
For blobs, we want to make sure the on-disk data is not corrupted
(i.e. can be inflated and produce the expected SHA-1). Blob content is
opaque, there's nothing else inside to check for.
For really large blobs, we may want to avoid unpacking the entire blob
in memory, just to check whether it produces the same SHA-1. On 32-bit
systems, we may not have enough virtual address space for such memory
allocation. And even on 64-bit where it's not a problem, allocating a
lot more memory could result in kicking other parts of systems to swap
file, generating lots of I/O and slowing everything down.
For this particular operation, not unpacking the blob and letting
check_sha1_signature, which supports streaming interface, do the job
is sufficient. check_sha1_signature() is not shown in the diff,
unfortunately. But if will be called when "data_valid && !data" is
false.
We will call the callback function "fn" with NULL as "data". The only
callback of this function is fsck_obj_buffer(), which does not touch
"data" at all if it's a blob.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
pack-objects: do not truncate result in-pack object size on 32-bit systems
A typical diff will not show what's going on and you need to see full
functions. The core code is like this, at the end of of write_one()
e->idx.offset = *offset;
size = write_object(f, e, *offset);
if (!size) {
e->idx.offset = recursing;
return WRITE_ONE_BREAK;
}
written_list[nr_written++] = &e->idx;
/* make sure off_t is sufficiently large not to wrap */
if (signed_add_overflows(*offset, size))
die("pack too large for current definition of off_t");
*offset += size;
Here we can see that the in-pack object size is returned by
write_object (or indirectly by write_reuse_object). And it's used to
calculate object offsets, which end up in the pack index file,
generated at the end.
If "size" overflows (on 32-bit sytems, unsigned long is 32-bit while
off_t can be 64-bit), we got wrong offsets and produce incorrect .idx
file, which may make it look like the .pack file is corrupted.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
index-pack: correct "offset" type in unpack_entry_data()
unpack_entry_data() receives an off_t value from unpack_raw_entry(),
which could be larger than unsigned long on 32-bit systems with large
file support. Correct the type so truncation does not happen. This
only affects bad object reporting though.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
index-pack: report correct bad object offsets even if they are large
Use the right type for offsets in this case, off_t, which makes a
difference on 32-bit systems with large file support, and change
formatting code accordingly.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
sha1_file.c: use type off_t* for object_info->disk_sizep
This field, filled by sha1_object_info() contains the on-disk size of
an object, which could go over 4GB limit of unsigned long on 32-bit
systems. Use off_t for it instead and update all callers.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
absolute_path() is a wrapper for strbuf_add_absolute_path(). Call the
latter directly for adding absolute paths to a strbuf. That's shorter
and avoids an extra string copy.
Signed-off-by: Rene Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
pack-objects: pass length to check_pack_crc() without truncation
On 32 bit systems with large file support, unsigned long is 32-bit
while the two offsets in the subtraction expression (pack-objects has
the exact same expression as in sha1_file.c but not shown in diff) are
in 64-bit. If an in-pack object is larger than 2^32 len/datalen is
truncated and we get a misleading "error: bad packed object CRC for
..." as a result.
Use off_t for len and datalen. check_pack_crc() already accepts this
argument as off_t and can deal with 4+ GB.
Noticed-by: Christoph Michelbach <michelbach94@gmail.com> Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Install the "apache" package to run the Git web server tests on
Travis-CI Linux build machines. The tests are already executed on OS X
build machines since the apache web server is installed by default.
Signed-off-by: Lars Schneider <larsxschneider@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
We forgot to adjust this code path after moving the test helpers to
t/helper/.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Acked-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
diff: fix a double off-by-one with --ignore-space-at-eol
When comparing two lines, ignoring any whitespace at the end, we first
try to match as many bytes as possible and break out of the loop only
upon mismatch, to let the remainder be handled by the code shared with
the other whitespace-ignoring code paths.
When comparing the bytes, however, we incremented the counters always,
even if the bytes did not match. And because we fall through to the
space-at-eol handling at that point, it is as if that mismatch never
happened.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The top level documentation "git help git" still pointed at the
documentation set hosted at now-defunct google-code repository.
Update it to point to https://git.github.io/htmldocs/git.html
instead.
* jn/preformatted-doc-url:
doc: git-htmldocs.googlecode.com is no more
Merge branch 'ao/p4-has-branch-prefix-fix' into maint
A bug, which caused "git p4" while running under verbose mode to
report paths that are omitted due to branch prefix incorrectly, has
been fixed; the command said "Ignoring file outside of prefix" for
paths that are _inside_.
One among four invocations of readlink(1) in our test suite has
been rewritten so that the test can run on systems without the
command (others are in valgrind test framework and t9802).
* ak/t7800-wo-readlink:
t7800: readlink may not be available
The internal code used to show local timezone offset is not
prepared to handle timestamps beyond year 2100, and gave a
bogus offset value to the caller. Use a more benign looking
+0000 instead and let "git log" going in such a case, instead
of aborting.
* jk/tzoffset-fix:
local_tzoffset: detect errors from tm_to_time_t
t0006: test various date formats
t0006: rename test-date's "show" to "relative"
Merge branch 'sb/clone-shallow-passthru' into maint
Fix an unintended regression in v2.9 that breaks "clone --depth"
that recurses down to submodules by forcing the submodules to also
be cloned shallowly, which many server instances that host upstream
of the submodules are not prepared for.
* sb/clone-shallow-passthru:
clone: do not let --depth imply --shallow-submodules
Formats of the various data (and how to validate them) where we use
GPG signature have been documented.
* mg/signature-doc:
Documentation/technical: signed merge tag format
Documentation/technical: signed commit format
Documentation/technical: signed tag format
Documentation/technical: describe signature formats
"git bisect" makes an internal call to "git diff-tree" when
bisection finds the culprit, but this call did not initialize the
data structure to pass to the diff-tree API correctly.
* jk/bisect-show-tree:
bisect: always call setup_revisions after init_revisions
"log --graph --format=" learned that "%>|(N)" specifies the width
relative to the terminal's left edge, not relative to the area to
draw text that is to the right of the ancestry-graph section. It
also now accepts negative N that means the column limit is relative
to the right border.
* nd/graph-width-padded:
pretty.c: support <direction>|(<negative number>) forms
pretty: pass graph width to pretty formatting for use in '%>|(N)'
Since 47f0b6d5 (Fall back to three-way merge when applying a patch.,
2005-10-06), i.e. for almost 11 years already, we used a male form
to describe "the other tree".
While it was unintended, this gave the erroneous impression as if
the Git developers thought of users as male, and were unaware of the
important role in software development played by female actors such
as Ada Lovelace, Grace Hopper and Margaret Hamilton. In fact, the
first professional software developers were all female.
Let's change those unfortunate references to the gender neutral
"their tree". Doing so also makes the fallback_merge_recursive(),
which is an oddball, more in line with the other parts of the system
where we contrast what we have vs what we obtain from others by
saying "ours" vs "theirs". This inconsistency was also unintended.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
notes-merge: use O_EXCL to avoid overwriting existing files
Use the open(2) flag O_EXCL to ensure the file doesn't already exist
instead of (racily) calling stat(2) through file_exists(). While at it
switch to xopen() to reduce code duplication and get more consistent
error messages.
Signed-off-by: Rene Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Set the diff attribute for C source file to "cpp" in order to improve
git's ability to determine hunk headers. In particular it helps avoid
showing unindented labels in hunk headers. That in turn is useful for
git diff -W and git grep -W, which show whole functions now instead of
stopping at a label.
Signed-off-by: Rene Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git update-index --add --chmod=+x file" may be usable as an escape
hatch, but not a friendly thing to force for people who do need to
use it regularly. "git add --chmod=+x file" can be used instead.
The documentation set has been updated so that literal commands,
configuration variables and environment variables are consistently
typeset in fixed-width font and bold in manpages.
* tr/doc-tt:
doc: change configuration variables format
doc: more consistency in environment variables format
doc: change environment variables format
doc: clearer rule about formatting literals
mktemp is not available on all platforms, so the test
'temporary filenames are used with mergetool.writeToTemp'
fails there.
This patch does not replace mktemp but just disables
the test that otherwise would fail.
mergetool checks itself before executing mktemp and
reports an error.
Signed-off-by: Armin Kunaschik <megabreit@googlemail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Makefile: drop extra dependencies for test helpers
A few test-helpers have Makefile dependencies on specific
object files. But since these files are part of libgit.a
(which all of the helpers link against), the inclusion is
simply redundant.
These were once necessary, but became redundant due to 5c5ba73 (Makefile: Use generic rule to build test programs,
2007-05-31), which added the $(GITLIBS) dependency (but
didn't prune the extra dependency lines). Later commits then
cargo-culted the practice (e.g., b4285c7).
Note that we _do_ need to leave the dependencies on the svn
library, as that is not part of the usual link command.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
parse_options: allocate a new array when concatenating
In exactly one callers (builtin/revert.c), we build up the
options list dynamically from multiple arrays. We do so by
manually inserting "filler" entries into one array, and then
copying the other array into the allocated space.
This is tedious and error-prone, as you have to adjust the
filler any time the second array is modified (although we do
at least check and die() when the counts do not match up).
Instead, let's just allocate a new array.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
When git-daemon exits, we expect it to be with the SIGTERM
we just sent it. If we see anything else, we'll complain.
But our check against exit code "143" is not portable. For
example:
In 8bf4bec (add "ok=sigpipe" to test_must_fail and use it to
fix flaky tests, 2015-11-27), test_must_fail learned to
recognize "141" as a sigpipe failure. However, testing for
a signal is more complicated than that; we should use
test_match_signal to implement more portable checking.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The first test already uses this more portable construct
(that was where it was factored from initially), but the
later tests do a raw comparison against 141 to look for
SIGPIPE, which can fail on some shells and platforms.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
In POSIX shells, a program which exits due to a signal
generally has an exit code of 128 plus the signal number.
However, ksh uses 256 plus the signal number. We've
accounted for that in t0005, but not in other tests. Let's
pull out the logic so we can use it elsewhere.
It would be nice for debugging if this additionally printed
errors to stderr, like our other test_* helpers. But we're
going to need to use it in other places besides the innards
of a test_expect block. So let's leave it as generic as
possible.
Note that we also leave the magic "3" for Windows out of the
generic helper. This is an artifact of the way we use
raise() to kill ourselves in test-sigchain.c, and will not
necessarily apply to all programs. So it's better to keep it
out of the helper, to reduce the chance of confusing it with
a real call to exit(3).
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
This reverts commit 4d5520053 (grep: make it clear i-t-a entries are
ignored, 2015-12-27) and adds an alternative fix to maintain the -L
--cached behavior.
4d5520053 caused 'git grep' to no longer find matches in new files in
the working tree where the corresponding index entry had the "intent to
add" bit set, despite the fact that these files are tracked.
The content in the index of a file for which the "intent to add" bit is
set is considered indeterminate and not empty. For most grep queries we
want these to behave the same, however for -L --cached (files without a
match) we don't want to respond positively for "intent to add" files as
their contents are indeterminate. This is in contrast to files with
empty contents in the index (no lines implies no matches for any grep
query expression) which should be reported in the output of a grep -L
--cached invocation.
Add tests to cover this case and a few related cases which previously
lacked coverage.
Helped-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Charles Bailey <cbailey32@bloomberg.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
We used character buffer manipulations to split messages from the
sideband at line breaks and insert "remote: " at the beginning of
each line, using the packet size to determine the end of a message.
However, since it is safe to assume that diagnostic messages from
the sideband never contain NUL characters, we can also NUL-terminate
the buffer, use strpbrk() for splitting lines and use format strings
to insert the prefix, to make the code easier to read and maintain.
A strbuf is used for accumulating the output which is then printed
using a single write(2) call to ensure the atomicity of the output.
See 9ac13ec (atomic write for sideband remote messages, 2006-10-11)
for details.
Helped-by: Jeff King <peff@peff.net> Helped-by: Junio C Hamano <gitster@pobox.com> Helped-by: Nicolas Pitre <nico@fluxnic.net> Signed-off-by: Lukas Fleischer <lfleischer@lfos.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
diffcore-pickaxe: support case insensitive match on non-ascii
Similar to the "grep -F -i" case, we can't use kws on icase search
outside ascii range, so we quote the string and pass it to regcomp as
a basic regexp and let regex engine deal with case sensitivity.
The new test is put in t7812 instead of t4209-log-pickaxe because
lib-gettext.sh might cause problems elsewhere, probably.
Noticed-by: Plamen Totev <plamen.totev@abv.bg> Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
There's another regcomp code block coming in this function that needs
the same error handling. This function can help avoid duplicating
error handling code.
Helped-by: Jeff King <peff@peff.com> Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the previous change in this function, we add locale support for
single-byte encodings only. It looks like pcre only supports utf-* as
multibyte encodings, the others are left in the cold (which is
fine).
We need to enable PCRE_UTF8 so pcre can find character boundary
correctly. It's needed for case folding (when --ignore-case is used)
or '*', '+' or similar syntax is used.
The "has_non_ascii()" check is to be on the conservative side. If
there's non-ascii in the pattern, the searched content could still be
in utf-8, but we can treat it just like a byte stream and everything
should work. If we force utf-8 based on locale only and pcre validates
utf-8 and the file content is in non-utf8 encoding, things break.
Noticed-by: Plamen Totev <plamen.totev@abv.bg> Helped-by: Plamen Totev <plamen.totev@abv.bg> Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
This function returns true if git is running under an UTF-8
locale. pcre in the next patch will need this.
is_encoding_utf8() is used instead of strcmp() to catch both "utf-8"
and "utf8" suffixes.
When built with no gettext support, we peek in several env variables
to detect UTF-8. pcre library might support utf-8 even if libc is
built without locale support.. The peeking code is a copy from
compat/regex/regcomp.c
Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
grep/pcre: prepare locale-dependent tables for icase matching
The default tables are usually built with C locale and only suitable
for LANG=C or similar. This should make case insensitive search work
correctly for all single-byte charsets.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
grep: rewrite an if/else condition to avoid duplicate expression
"!icase || ascii_only" is repeated twice in this if/else chain as this
series evolves. Rewrite it (and basically revert the first if
condition back to before the "grep: break down an "if" stmt..." commit).
Helped-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Similar to the previous commit, we can't use kws on icase search
outside ascii range. But we can't simply pass the pattern to
regcomp/pcre like the previous commit because it may contain regex
special characters, so we need to quote the regex first.
To avoid misquote traps that could lead to undefined behavior, we
always stick to basic regex engine in this case. We don't need fancy
features for grepping a literal string anyway.
basic_regex_quote_buf() assumes that if the pattern is in a multibyte
encoding, ascii chars must be unambiguously encoded as single
bytes. This is true at least for UTF-8. For others, let's wait until
people yell up. Chances are nobody uses multibyte, non utf-8 charsets
anymore.
Noticed-by: Plamen Totev <plamen.totev@abv.bg> Helped-by: René Scharfe <l.s.r@web.de> Helped-by: Eric Sunshine <sunshine@sunshineco.com> Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
commit -S: avoid invalid pointer with empty message
While it is not recommended, fsck.c says:
Not having a body is not a crime [...]
... which means that we cannot assume that the commit buffer
contains an empty line to separate header from body. A commit
object with only a header without any body, not even without
a blank line after the header, is valid.
So let's tread carefully here. strstr("\n\n") may find nothing
and return NULL.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
reset --hard: skip blank lines when reporting the commit subject
When there are blank lines at the beginning of a commit message, the
pretty printing machinery already skips them when showing a commit
subject (or the complete commit message). We shall henceforth do the
same when reporting the commit subject after the user called
git reset --hard <commit>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
sequencer: use skip_blank_lines() to find the commit subject
Just like we already taught the find_commit_subject() function (to make
it consistent with the code in pretty.c), we now simply skip leading
blank lines of the commit message.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
commit -C: skip blank lines at the beginning of the message
Consistent with the pretty-printing machinery, we skip leading blank
lines (if any) of existing commit messages.
While Git itself only produces commit objects with a single empty line
between commit header and commit message, it is legal to have more than
one blank line (i.e. lines containing only white space, or no
characters) at the beginning of the commit message, and the
pretty-printing code already handles that.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we abort an interactive rebase we do so by calling
`die_abort`, which cleans up after us by removing the rebase
state directory. If the user has requested to use the autostash
feature, though, the state directory may also contain a reference
to the autostash, which will now be deleted.
Fix the issue by trying to re-apply the autostash in `die_abort`.
This will also handle the case where the autostash does not apply
cleanly anymore by recording it in a user-visible stash.
Reported-by: Daniel Hahler <git@thequod.de> Signed-off-by: Patrick Steinhardt <ps@pks.im> Signed-off-by: Junio C Hamano <gitster@pobox.com>
contrib/subtree: Add a test for subtree rebase that loses commits
This test merges an external tree in as a subtree, makes some commits
on top of it and splits it back out. In the process the added commits
are lost or the rebase aborts with an internal error. The tests are
marked to expect failure so that we don't forget to fix it.
Signed-off-by: David A. Greene <greened@obbligato.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
color.h: remove obsolete comment about limitations on Windows
Originally, ANSI color sequences were supported on Windows only by
overriding the printf() and fprintf() functions, as mentioned in e7821d7
(Add a notice that only certain functions can print color escape codes,
2009-11-27).
As of eac14f8 (Win32: Thread-safe windows console output, 2012-01-14),
however, this is no longer the case, as the ANSI color sequence support
code needed to be replaced with a thread-safe version, one side effect
being that stdout and stderr handled no matter which function is used to
write to it.
So let's just remove the comment that is now obsolete.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
doc: typeset short command-line options as literal
It was common in our documentation to surround short option names with
forward quotes, which renders as italic in HTML. Instead, use backquotes
which renders as monospace. This is one more step toward conformance to
Documentation/CodingGuidelines.
This was obtained with:
perl -pi -e "s/'(-[a-z])'/\`\$1\`/g" *.txt
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr> Signed-off-by: Junio C Hamano <gitster@pobox.com>