use 'init' instead of 'init-db' for shipped docs and tools
While 'init-db' still is and probably will always remain a valid git
command for obvious backward compatibility reasons, it would be a good
idea to move shipped tools and docs to using 'init' instead.
Signed-off-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
Andy Parkins noticed that the error message some "whole tree"
oriented commands emit is stated misleadingly when they refused
to run from a subdirectory.
We could probably allow some of them to work from a subdirectory
but that is a semantic change that could have unintended side
effects, so let's start at first by rewording the error message
to be easier to read without doing anything else to be safe.
git-revert: Fix die before git-sh-setup defines it.
The code previously checked it's own name and called 'die' upon
an error. However 'die' was not yet defined because git-sh-setup
had not been sourced yet. Instead simply write the error message
to stderr and exit with an error as was originally desired.
Signed-off-by: Bob Proulx <bob@proulx.com> Signed-off-by: Junio C Hamano <junkio@cox.net>
Despite what the documentation claims, git-commit does not check commit
for suspicious lines: all hooks are disabled by default,
and the pre-comit hook could be changed to do something else.
Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: Junio C Hamano <junkio@cox.net>
The "read_or_die()" function would silently NOT die for a partial read,
and since it was of type "void" it obviously couldn't even return the
partial number of bytes read.
IOW, it was totally broken. This hopefully fixes it up.
Signed-off-by: Linus Torvalds <torvalds@osdl.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
With the new-and-improved write_in_full() semantics, where a partial write
simply always returns a real error (and always sets 'errno' when that
happens, including for the disk full case), a lot of the callers of
write_in_full() were just unnecessarily complex.
In particular, there's no reason to ever check for a zero length or
return: if the length was zero, we'll return zero, otherwise, if a disk
full resulted in the actual write() system call returning zero the
write_in_full() logic would have correctly turned that into a negative
return value, with 'errno' set to ENOSPC.
I really wish every "write_in_full()" user would just check against "<0"
now, but this fixes the nasty and stupid ones.
Signed-off-by: Linus Torvalds <torvalds@osdl.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
Chose better tag names in git-describe after merges.
Recently git.git itself encountered a situation on its master and
next branches where git-describe stopped reporting 'v1.5.0-rc0-gN'
and instead started reporting 'v1.4.4.4-gN'. This appeared to be
a backward jump in version numbering.
The issue is that commit C in the diagram claims it is version
1.5.0, as the tag v1.5.0 is placed on commit 5. Yet commit W
claims it is version 1.4.4.4 as the tag v1.5.0 has an older tag
date than the v1.4.4.4 tag.
As it turns out this situation is very common. A bug fix applied
to maint and later merged into master occurs frequently enough that
it should Just Work Right(tm).
Rather than taking the first tag that gets found git-describe will
now generate a list of all possible tags and select the one which
has the most number of commits in common with HEAD (or whatever
revision the user requested the description of).
This rule is based on the principle shown in the diagram above.
There are a large number of commits on the primary development branch
'master' which do not appear in the 'maint' branch, and many of
these are already tagged as part of v1.5.0-rc0. Additionally these
commits are not in v1.4.4.4, as they are part of the v1.5.0 release
still being developed. The v1.5.0-rc0 tag is more descriptive of
W than v1.4.4.4 is, and therefore should be used.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
* jc/bare:
Disallow working directory commands in a bare repository.
git-fetch: allow updating the current branch in a bare repository.
Introduce is_bare_repository() and core.bare configuration variable
Move initialization of log_all_ref_updates
* jc/detached-head:
git-checkout: handle local changes sanely when detaching HEAD
git-checkout: safety check for detached HEAD checks existing refs
git-checkout: fix branch name output from the command
git-checkout: safety when coming back from the detached HEAD state.
git-checkout: rewording comments regarding detached HEAD.
git-checkout: do not warn detaching HEAD when it is already detached.
Detached HEAD (experimental)
git-branch: show detached HEAD
git-status: show detached HEAD
Often the user would do "/bin/rm foo" before telling git, but
then want to tell git about it. "git rm foo" however would fail
because it cannot unlink(2) foo.
Treat ENOENT error return from unlink(2) as if a successful
removal happened.
This fixes another problem that Andy's case showed: git-fsck-objects
reports nonsensical results for corrupt objects.
There were actually two independent and confusing problems:
- when we had a zero-sized file and used map_sha1_file, mmap() would
return EINVAL, and git-fsck-objects would report that as an insane and
confusing error. I don't know when this was introduced, it might have
been there forever.
- when "parse_object()" returned NULL, fsck would say "object not found",
which can be very confusing, since obviously the object might "exist",
it's just unparseable because it's totally corrupt.
So this just makes "xmmap()" return NULL for a zero-sized object (which is
a valid thing pointer, exactly the same way "malloc()" can return NULL for
a zero-sized allocation). That fixes the first problem (but we could have
fixed it in the caller too - I don't personally much care whichever way it
goes, but maybe somebody should check that the NO_MMAP case does
something sane in this case too?).
And the second problem is solved by just making the error message slightly
clearer - the failure to parse an object may be because it's missing or
corrupt, not necessarily because it's not "found".
Signed-off-by: Linus Torvalds <torvalds@osdl.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
These days, the command does a lot more than just initialise the
object database (such as setting default config-variables,
installing template hooks...), and "git init" is actually a more
sensible name nowadays.
Disallow working directory commands in a bare repository.
If the user tries to run a porcelainish command which requires
a working directory in a bare repository they may get unexpected
results which are difficult to predict and may differ from command
to command.
Instead we should detect that the current repository is a bare
repository and refuse to run the command there, as there is no
working directory associated with it.
[jc: updated Shawn's original somewhat -- bugs are mine.]
Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
There is no need to write out the index until the very end just
once from merge-recursive. Also there is no need to write out
the resulting tree object for the simple case of merging with a
single merge base.
Speed-up recursive by flushing index only once for all entries
The merge-recursive implementation in C inherited the invariant
that the on-file index file is written out and later read back
after any index operations and writing trees from the original
Python implementation. But it was only because the original
implementation worked at the scripting level.
There is no need to write out the index file after handling
every path.
Signed-off-by: Alex Riesen <raa.lkml@gmail.com> Signed-off-by: Junio C Hamano <junkio@cox.net>
Since wt-status is already computing all the information needed go the whole
way and actually track the (non-)emptiness of all three sections separately,
unify the code, and provide useful messages for each individual case.
Thanks to Junio and Michael Loeffler for suggestions.
Makefile: remove $foo when $foo.exe is built/installed.
On Cygwin, newly builtins are not recognized, because there exist both
the executable binaries (with .exe extension) _and_ the now-obsolete
scripts (without extension), but the script is executed.
send-email: work around double encoding of in-body From field.
git-send-email sends out the message taken from format-patch
output without quoting nor encoding. When copying the From:
line to form in-body From: field, it should not copy it
verbatim, because the From: for the header is quoted according
to RFC 2047 when not ASCII.
The original came from Jürgen Rühle, but I moved the
string munging into a separate function so that later other
people can tweak it more easily. Bugs introduced during the
translation are mine.
Since c869753e, core.filemode is hardwired to false on Cygwin.
So this test had no chance to succeed, since an early commit
(changing just the filemode) failed, and therefore all subsequent
tests.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de> Signed-off-by: Junio C Hamano <junkio@cox.net>
git-checkout: handle local changes sanely when detaching HEAD
When switching branches, we usually first try read-tree to make
sure that we do not lose the local changes and then updated the
HEAD using update-ref. However, we detached and updated HEAD
before these checks, which was quite bad in a repository with
local changes.
My sp/mmap changes to pack-check.c modified the function such that
it expects packed_git.pack_size to be populated with the total
bytecount of the packfile by the caller.
But that isn't the case for packs obtained by git-http-fetch as
pack_size was not initialized before being accessed. This caused
verify_pack to think it had 2^32-21 bytes available when the
downloaded pack perhaps was only 305 bytes in length. The use_pack
function then later dies with "offset beyond end of packfile"
when computing the overall file checksum.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
Replacing the system call pread() with lseek()/xread()/lseek() sequence.
Using cygwin with cygwin.dll before 1.5.22 the system call pread() is buggy.
This patch introduces NO_PREAD. If NO_PREAD is set git uses a sequence of
lseek()/xread()/lseek() to emulate pread.
Signed-off-by: Stefan-W. Hahn <stefan.hahn@s-hahn.de> Signed-off-by: Junio C Hamano <junkio@cox.net>
It used to ignore the return value of the helper function; now, it
expects it to return 0, and stops iteration upon non-zero return
values; this value is then passed on as the return value of
for_each_reflog_ent().
Further, it makes no sense to force the parsing upon the helper
functions; for_each_reflog_ent() now calls the helper function with
old and new sha1, the email, the timestamp & timezone, and the message.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <junkio@cox.net>
find_header() function is used to read and parse the patchfile
and it detects errors in the patch, but one place ignored the
error and went ahead, which was quite bad.
Auto-quote config values in config.c:store_write_pair()
Suggested by Jakub Narebski <jnareb@gmail.com> on the list.
When we send a value to store_write_pair(), make sure that the value
that gets read out matches the one passed in. This means that for any
value that contains leading or trailing whitespace or any comment
character (# and ;), we need to surround it in quotes.
Signed-off-by: Brian Gernhardt <benji@silverinsanity.com> Signed-off-by: Junio C Hamano <junkio@cox.net>
With this patch, cvs add / cvs commit echoes back to the client
the correct file version (1.1) so that the file in the checkout
is recognised as up-to-date.
Signed-off-by: Martin Langhoff <martin@catalyst.net.nz> Signed-off-by: Junio C Hamano <junkio@cox.net>
* jc/reflog:
reflog --fix-stale: do not check the same trees and commits repeatedly.
reflog expire --fix-stale
Move traversal of reachable objects into a separate library.
builtin-prune: separate ref walking from reflog walking.
builtin-prune: make file-scope static struct to an argument.
short i/o: fix calls to write to use xwrite or write_in_full
We have a number of badly checked write() calls. Often we are
expecting write() to write exactly the size we requested or fail,
this fails to handle interrupts or short writes. Switch to using
the new write_in_full(). Otherwise we at a minimum need to check
for EINTR and EAGAIN, where this is appropriate use xwrite().
Note, the changes to config handling are much larger and handled
in the next patch in the sequence.
Signed-off-by: Andy Whitcroft <apw@shadowen.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
short i/o: fix calls to read to use xread or read_in_full
We have a number of badly checked read() calls. Often we are
expecting read() to read exactly the size we requested or fail, this
fails to handle interrupts or short reads. Add a read_in_full()
providing those semantics. Otherwise we at a minimum need to check
for EINTR and EAGAIN, where this is appropriate use xread().
Signed-off-by: Andy Whitcroft <apw@shadowen.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
short i/o: clean up the naming for the write_{in,or}_xxx family
We recently introduced a write_in_full() which would either write
the specified object or emit an error message and fail. In order
to fix the read side we now want to introduce a read_in_full()
but without an error emit. This patch cleans up the naming
of this family of calls:
1) convert the existing write_or_whine() to write_or_whine_pipe()
to better indicate its pipe specific nature,
2) convert the existing write_in_full() calls to write_or_whine()
to better indicate its nature,
3) introduce a write_in_full() providing a write or fail semantic,
and
4) convert write_or_whine() and write_or_whine_pipe() to use
write_in_full().
Signed-off-by: Andy Whitcroft <apw@shadowen.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
git-checkout: safety when coming back from the detached HEAD state.
After making commits in the detached HEAD state, if you run "git
checkout" to switch to an existing branch, you will lose your
work. Make sure the switched-to branch is a fast-forward of the
current HEAD, or require -f when switching.
We used to say "you are not on a branch" before the initial
commit. This is incorrect -- the user is on a branch yet to be
born, but its name has been already determined.
This allows "git checkout v1.4.3" to dissociate the HEAD of
repository from any branch. After this point, "git branch"
starts reporting that you are not on any branch. You can go
back to an existing branch by saying "git checkout master", for
example.
This is still experimental. While I think it makes sense to
allow commits on top of detached HEAD, it is rather dangerous
unless you are careful in the current form. Next "git checkout
master" will obviously lose what you have done, so we might want
to require "git checkout -f" out of a detached HEAD if we find
that the HEAD commit is not an ancestor of any other branches.
There is no such safety valve implemented right now.
On the other hand, the reason the user did not start the ad-hoc
work on a new branch with "git checkout -b" was probably because
the work was of a throw-away nature, so the convenience of not
having that safety valve might be even better. The user, after
accumulating some commits on top of a detached HEAD, can always
create a new branch with "git checkout -b" not to lose useful
work done while the HEAD was detached.
git-fetch: allow updating the current branch in a bare repository.
Sometimes, people have only fetch access into a bare repository
that is used as a back-up location (or a distribution point) but
does not have a push access for networking reasons, e.g. one end
being behind a firewall, and updating the "current branch" in
such a case is perfectly fine.
This allows such a fetch without --update-head-ok, which is a
flag that should never be used by end users otherwise.
Introduce is_bare_repository() and core.bare configuration variable
This removes the old is_bare_git_dir(const char *) to ask if a
directory, if it is a GIT_DIR, is a bare repository, and
replaces it with is_bare_repository(void *). The function looks
at core.bare configuration variable if exists but uses the old
heuristics: if it is ".git" or ends with "/.git", then it does
not look like a bare repository, otherwise it does.
The patches to prevent Porcelainish that require working tree
from doing any damage in a bare repository make a lot of sense,
and I want to make the is_bare_git_dir() function more reliable.
In order to allow the repository owner override the heuristic
implemented in is_bare_git_dir() if/when it misidentifies a
particular repository, it would make sense to introduce a new
configuration variable "[core] bare = true/false", and make
is_bare_git_dir() notice it.
The scripts would do a 'repo-config --bool --get core.bare' and
iff the command fails (i.e. there is no such variable in the
configuration file), it would use the heuristic implemented at
the script level [*1*].
However, setup_git_env() which is called a lot earlier than we
even read from the repository configuration currently makes a
call to is_bare_git_dir(), in order to change the default
setting for log_all_ref_updates. It somehow feels that this is
a hack.
By the way, [*1*] is another thing I hate about the current
config mechanism. "git-repo-config --get" does not know what
the possible configuration variables are, let alone what the
default values for them are. It allows us not to maintain a
centralized configuration table, which makes it easy to
introduce ad-hoc variables and gives a warm fuzzy feeling of
being modular, but my feeling is that it is turning out to be a
rather high price to pay for scripts.
With this patch, cvsimport will skip commits made
in the last 10 minutes. The recent-ness test is of
5 minutes + cvsps fuzz window (5 minutes default).
When working with a CVS repository that is in use,
importing commits that are too recent can lead to
partially incorrect trees. This is mainly due to
- Commits that are within the cvsps fuzz window may later
be found to have affected more files.
- When performing incremental imports, clock drift between
the systems may lead to skipped commits.
This commit helps keep incremental imports of in-use
CVS repositories sane.
Signed-off-by: Martin Langhoff <martin@catalyst.net.nz> Signed-off-by: Junio C Hamano <junkio@cox.net>
Remove unnecessary git-rm --cached reference from status output
Since git-reset has learned restoring the absence of paths git-rm --cached is
no longer necessary. Therefore remove it from the cached content header hint.
Also remove the unfortunate wording 'Cached' from the header itself.
Signed-off-by: Jürgen Rühle <j-r@online.de> Signed-off-by: Junio C Hamano <junkio@cox.net>
* sp/mmap: (27 commits)
Spell default packedgitlimit slightly differently
Increase packedGit{Limit,WindowSize} on 64 bit systems.
Update packedGit config option documentation.
mmap: set FD_CLOEXEC for file descriptors we keep open for mmap()
pack-objects: fix use of use_pack().
Fix random segfaults in pack-objects.
Cleanup read_cache_from error handling.
Replace mmap with xmmap, better handling MAP_FAILED.
Release pack windows before reporting out of memory.
Default core.packdGitWindowSize to 1 MiB if NO_MMAP.
Test suite for sliding window mmap implementation.
Create pack_report() as a debugging aid.
Support unmapping windows on 'temporary' packfiles.
Improve error message when packfile mmap fails.
Ensure core.packedGitWindowSize cannot be less than 2 pages.
Load core configuration in git-verify-pack.
Fully activate the sliding window pack access.
Unmap individual windows rather than entire files.
Document why header parsing won't exceed a window.
Loop over pack_windows when inflating/accessing data.
...
* jr/status:
Improve cached content header of status output
Support --amend on initial commit in status output
Improve "nothing to commit" part of status output
Clarify syntax and role of git-add in status output
git-reset <tree> -- <path> restores absense of <path> in <tree>
When <path> exists in the index (either merged or unmerged), and
<tree> does not have it, git-reset should be usable to restore
the absense of it from the tree. This implements it.
diff-index --cached --raw: show tree entry on the LHS for unmerged entries.
This updates the way diffcore represents an unmerged pair
somewhat. It used to be that entries with mode=0 on both sides
were used to represent an unmerged pair, but now it has an
explicit flag. This is to allow diff-index --cached to report
the entry from the tree when the path is unmerged in the index.
This is used in updating "git reset <tree> -- <path>" to restore
absense of the path in the index from the tree.
reflog --fix-stale: do not check the same trees and commits repeatedly.
Since we use the reachability tracking machinery now, we should
keep the already checked trees and commits whose completeness is
known, to avoid checking the same thing over and over again.
The logic in an earlier round to detect reflog entries that
point at a broken commit was not sufficient. Just like we do
not trust presense of a commit during pack transfer (we trust
only our refs), we should not trust a commit's presense, even if
the tree of that commit is complete.
A repository that had reflog enabled on some of the refs that
was rewound and then run git-repack or git-prune from older
versions of git can have reflog entries that point at a commit
that still exist but lack commits (or trees and blobs needed for
that commit) between it and some commit that is reachable from
one of the refs.
This revamps the logic -- the definition of "broken commit"
becomes: a commit that is not reachable from any of the refs and
there is a missing object among the commit, tree, or blob
objects reachable from it that is not reachable from any of the
refs. Entries in the reflog that refer to such a commit are
expired.
Since this computation involves traversing all the reachable
objects, i.e. it has the same cost as 'git prune', it is enabled
only when a new option --fix-stale. Fortunately, once this is
run, we should not have to ever worry about missing objects,
because the current prune and pack-objects know about reflogs
and protect objects referred by them.
Unfortunately, this will be absolutely necessary to help people
migrate to the newer prune and repack.
Move traversal of reachable objects into a separate library.
This moves major part of builtin-prune into a separate file,
reachable.c. It is used to mark the objects that are reachable
from refs, and optionally from reflogs.
The patch looks very large, but if you look at it with diff -C,
which this message is formatted in, most of them are copied
lines and there are very little additions.
builtin-prune: separate ref walking from reflog walking.
This is necessary for the next step, because the reason I am
making the connectivity walker into a library is because I want
to use it for cleaning up stale reflog entries.