Supposing that both the base and result sizes were both full size 64-bit
values, their encoding would occupy only 9.2 bytes each. Therefore
inflating 64 bytes is way overkill. Limit it to 20 bytes instead which
should be plenty enough for a couple years to come.
Signed-off-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
v1.2.0 is Ok and I personally would say it is old enough, but
the improvement between version 2 and version 3 delta is not
bit enough to justify breaking older clients.
We should resurrect this later, but when we do so we shold
make it conditional.
clone: the given repository dir should be relative to $PWD
the repository argument for git-clone should be relative to $PWD
instead of the given target directory. The old behavior gave us
surprising success and you need a few minute to know why it worked.
GIT_DIR is already exported so no need to cd into $D. And this makes
$PWD for git-fetch-pack, which is the actual command to take the given
repository dir, the same as git-clone.
Signed-off-by: Yasushi SHOJI <yashi@atmark-techno.com> Signed-off-by: Junio C Hamano <junkio@cox.net>
apply_textdelta and send_stream can use a separate pool from the
rest of the editor interface, so we'll use a separate SVN::Pool
for them and clear the pool after each file is sent to SVN.
This drastically reduces memory usage per-changeset committed,
and makes large commits (and initial imports) of several
thousand files possible.
Signed-off-by: Eric Wong <normalperson@yhbt.net> Signed-off-by: Junio C Hamano <junkio@cox.net>
Most callers of write_sha1_file_prepare() are only interested in the
resulting hash but don't care about the returned file name or the header.
This patch adds a simple wrapper named hash_sha1_file() which does just
that, and converts potential callers.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx> Signed-off-by: Junio C Hamano <junkio@cox.net>
Once a get_commit_editor has been called from an SVN session, RA
layer operations are not allowed (well, unless you're using
file:// or http(s)://). So we'll pass an alternate SVN::Ra
object to our editor object for running 'check-path'.
This should fix commits over svnserve (svn:// without ssh, too).
Closes Debian bug #392702, thanks to Pierre Habouzit for
reporting the bug.
Signed-off-by: Eric Wong <normalperson@yhbt.net> Signed-off-by: Junio C Hamano <junkio@cox.net>
When whitespace or whitespace change was ignored, the function
xdl_recmatch() returned memcmp() style differences, which is wrong,
since it should return 0 on non-match.
Also, there were three horrible off-by-one bugs, even leading to wrong
hashes in the whitespace special handling.
The issue was noticed by Ray Lehtiniemi.
For good measure, this commit adds a test.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de> Signed-off-by: Junio C Hamano <junkio@cox.net>
git-svn: add a message encouraging use of SVN::* libraries
I'm using svn 1.4.0-4 in Debian unstable and apparently there's
a regression on the SVN side that prevents a symlink from
becoming a regular file (which git supports, of course).
It's not a noticeable regression for most people, but this broke
the full-svn-tests target in t/Makefile for me.
The SVN::* Perl libraries seem to have matured and improved over
the past year, and git-svn has supported them for several months
now, so with that I encourage all users to start using the
SVN::* Perl libraries with git-svn.
Signed-off-by: Eric Wong <normalperson@yhbt.net> Signed-off-by: Junio C Hamano <junkio@cox.net>
commit: fix a segfault when displaying a commit with unreachable parents
I was running git show on various commits found by fsck-objects
when I found this bug. Since find_unique_abbrev() cannot find
an abbreviation for an object not in the database, it will
return NULL, which is bad to run strlen() on. So instead, we'll
just display the unabbreviated sha1 that we referenced in the
commit.
I'm not sure that this is the best 'fix' for it because the
commit I was trying to show was broken, but I don't think a
program should segfault even if the user tries to do something
stupid.
Signed-off-by: Eric Wong <normalperson@yhbt.net> Signed-off-by: Junio C Hamano <junkio@cox.net>
'graft-branches' is slightly longer than the rest of the
commands, so the text was squished together in the formatted
output. This patch just adds some more whitespace to make
the text look more pleasant.
Signed-off-by: Eric Wong <normalperson@yhbt.net> Signed-off-by: Junio C Hamano <junkio@cox.net>
Documentation/git-svn: document some of the newer features
I've forgotten to document many of the features added along the
way in the manpages. This fills in some holes in the
documentation and adds updates some outdated information.
Signed-off-by: Eric Wong <normalperson@yhbt.net> Signed-off-by: Junio C Hamano <junkio@cox.net>
Change the --verbose flag to more closely match svn. I was
somehow under the impression that --summary included --raw diff
output, but I was wrong. We now pass -r --raw --name-status as
arguments if passed -v/--verbose.
-r (recursive) is passed by default, since users usually want
it, and accepting it causes difficulty with the -r<revision>
option used by svn users. A --non-recursive switch has been
added to disable this.
Of course, --summary, --raw, -p and any other git-log options
can still be passed directly (without --name-status).
Also, several warnings about referencing undefined variables
have been fixed.
Signed-off-by: Eric Wong <normalperson@yhbt.net> Signed-off-by: Junio C Hamano <junkio@cox.net>
git-svn: multi-init saves and reuses --tags and --branches arguments
This should make it much easier to track newly added tags and
branches. Re-running multi-init without command-line arguments
should now detect new-tags and branches.
--trunk shouldn't change often, but running multi-init on it
is now idempotent.
Signed-off-by: Eric Wong <normalperson@yhbt.net> Signed-off-by: Junio C Hamano <junkio@cox.net>
The confusion can be avoided in most cases by writing the remote message
in one go to prevent interleacing with local messages. The buffer
declaration has been moved inside recv_sideband() to avoid extra string
copies.
Signed-off-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
Martin Waitz noticed that one of the case arms had an impossible
choice. It turns out that what it was checking was redundant and
the typo did not have any effect.
> On Sat, 07 Oct 2006 21:52:02 -0700
> Junio C Hamano <junkio@cox.net> wrote:
>
>> Using DAV, if it works with the server, has the advantage of not
>> having to keep objects/info/packs up-to-date from repository
>> owner's point of view. But the repository owner ends up keeping
>> up-to-date as a side effect of keeping info/refs up-to-date
>> anyway (as I do not see a code to read that information over
>> DAV), so there is no point doing this over DAV in practice.
>>
>> Perhaps we should remove call to remote_ls() from
>> fetch_indices() unconditionally, not just protected with
>> NO_EXPAT and be done with it?
>
> That makes a lot of sense. A server really has to always provide
> a objects/info/packs anyway, just to be fetchable today by clients
> that are compiled with NO_EXPAT.
And even for an isolated group where everybody knows that
everybody else runs DAV-enabled clients, they need info/refs
prepared for ls-remote and git-fetch script, which means you
will run update-server-info to keep objects/info/packs up to
date.
Nick, do you see holes in my logic?
-- >8 --
http-fetch.c: drop remote_ls()
While doing remote_ls() over DAV potentially allows the server
side not to keep objects/info/pack up-to-date, misconfigured or
buggy servers can silently ignore or not to respond to DAV
requests and makes the client hang.
The server side (unfortunately) needs to run git-update-server-info
even if remote_ls() removes the need to keep objects/info/pack file
up-to-date, because the caller of git-http-fetch (git-fetch) and other
clients that interact with the repository (e.g. git-ls-remote) need to
read from info/refs file (there is no code to make that unnecessary by
using DAV yet).
Perhaps the right solution in the longer-term is to make info/refs
also unnecessary by using DAV, and we would want to resurrect the
code this patch removes when we do so, but let's drop remote_ls()
implementation for now. It is causing problems without really
helping anything yet.
git will keep it for us until we need it next time.
gitweb: Cleanup Git logo and Git logo target generation
Rename $githelp_url and $githelp_label to $logo_url and $logo_label to
be more obvious what they refer to; while at it add commented out
previous contents (git documentation at kernel.org). Add comment about
logo size.
Use $cgi->a(...) to generate Git logo link; it automatically escapes
attribute values when it is needed. Escape href attribute using
esc_url instead of (incorrect!) esc_html.
Move styling of git logo <img> element from "style" attribute to CSS
via setting class to "logo". Perhaps we should set it by id rather
than by class.
Signed-off-by: Jakub Narebski <jnareb@gmail.com> Signed-off-by: Junio C Hamano <junkio@cox.net>
Noted by Jiri Slaby, git-tar-tree --remote doesn't need to be run
from inside of a git archive. Since git-tar-tree is now only a
wrapper for git-archive, which calls setup_git_directory() as
needed, we should drop the flag RUN_SETUP.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx> Signed-off-by: Junio C Hamano <junkio@cox.net>
Add symlink support to ZIP file creation, and a few tests.
This implementation sets the "version made by" field
(creator_version) to Unix for symlinks, only; regular files and
directories are still marked as originating from FAT/VFAT/NTFS.
Also set "external file attributes" (attr2) to 0 for regular
files and 16 for directories (FAT attribute), and to the file
mode for symlinks.
We could always set the creator_version to Unix and include the
mode, but then Info-ZIP unzip would set the mode of the extracted
files to *exactly* the value stored in attr2. The FAT trick
makes it apply the umask instead. Note: FAT has no executable
bit, so this information is not stored in the ZIP file.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx> Signed-off-by: Junio C Hamano <junkio@cox.net>
Use 10 for the "version needed to extract" field. This is the
default value, and we want to use it because we don't do anything
special. Info-ZIP's zip uses it, too.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx> Signed-off-by: Junio C Hamano <junkio@cox.net>
test-lib: separate individual test better in verbose mode.
When running tests with --verbose it is difficult to see where
one test starts and where it ends because everything is printed
in one big lump.
Fix that by printing one single newline between each test.
Signed-off-by: Martin Waitz <tali@admingilde.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
Add default values for --window and --depth to the docs
Currently, you actually have to read the source to find out the
default values. While at it, fix two typos and suggest that these
options actually take a parameter in git-pack-objects.txt.
Signed-off-by: Dennis Stosberg <dennis@stosberg.net> Signed-off-by: Junio C Hamano <junkio@cox.net>
Minimize vertical table row padding for blame only. I
discovered this while having the browser's blame output
right next to my editor's window, only to notice how much
vertically stretched the blame output was.
Blame most likely shows source code and is in this way
more "spartan" than the rest of the tables gitweb shows.
This patch makes the blame table more vertically compact,
thus being closer to what you'd see in your editor's window,
as well as reusing more window estate to show more
information (which in turn minimizes scrolling).
Signed-off-by: Luben Tuikov <ltuikov@yahoo.com> Signed-off-by: Junio C Hamano <junkio@cox.net>
gitweb: Do not print "log" and "shortlog" redundantly in commit view
Do not print "log" and "shortlog" redundantly in commit
view. This is passed into the $extra argument of
git_print_page_nav from git_commit, but git_print_page_nav
prints "log" and "shortlog" already with the same head.
Noticed by Junio.
Signed-off-by: Luben Tuikov <ltuikov@yahoo.com> Signed-off-by: Junio C Hamano <junkio@cox.net>
It is silly to keep using git-tar-tree in dist target when the
command gives a big deprecation warning when called. Instead,
use "git-archive --format=tar" which we recommend to our users.
Update gitweb's snapshot feature to use git-archive for the same
reason.
lock_ref_sha1_basic does not remove empty directories on BSD
lock_ref_sha1_basic relies on errno beeing set to EISDIR by the
call to read() in resolve_ref() to detect directories. But calling
read() on a directory under NetBSD returns EPERM, and even succeeds
for local filesystems on FreeBSD.
Signed-off-by: Dennis Stosberg <dennis@stosberg.net> Signed-off-by: Junio C Hamano <junkio@cox.net>
git-push: .git/remotes/ file does not require SP after colon
Although most people would have one after colon if only for
readability, we never required it in git-parse-remote, so let's
not require one only in git-push.
* jc/gitpm: (52 commits)
Remove -fPIC which was only needed for Git.xs
Git.pm: Kill Git.xs for now
Revert "Make it possible to set up libgit directly (instead of from the environment)"
Revert "Git.pm: Introduce fast get_object() method"
Revert "Convert git-annotate to use Git.pm"
Fix compilation with Sun CC
pass DESTDIR to the generated perl/Makefile
Eliminate Scalar::Util usage from private-Error.pm
Convert git-annotate to use Git.pm
Git.pm: Introduce fast get_object() method
Make it possible to set up libgit directly (instead of from the environment)
Work around sed and make interactions on the backslash at the end of line.
Git.pm: Introduce ident() and ident_person() methods
Convert git-send-email to use Git.pm
Git.pm: Add config() method
Use $GITPERLLIB instead of $RUNNING_GIT_TESTS and centralize @INC munging
INSTALL: a tip for running after building but without installing.
Perly Git: make sure we do test the freshly built one.
Git.pm: Don't #define around die
Git.xs: older perl do not know const char *
...
* jc/diff-stat:
diff --stat: ensure at least one '-' for deletions, and one '+' for additions
diff --stat=width[,name-width]: allow custom diffstat output width.
diff --stat: color output.
diff --stat: allow custom diffstat output width.
* lt/web:
gitweb: tree view: hash_base and hash are now context sensitive
gitweb: History: blob and tree are first, then commitdiff, etc
gitweb: Remove redundant "commit" from history
gitweb: Don't use quotemeta on internally generated strings
gitweb: Add snapshot to shortlog
gitweb: Factor out gitweb_have_snapshot()
gitweb: Remove redundant "commit" link from shortlog
gitweb: "alternate" starts with shade (i.e. 1)
gitweb: Add history and blame to git_difftree_body()
gitweb: Remove excessively redundant entries from git_difftree_body
Revert "gitweb: extend blame to show links to diff and previous"
gitweb: Quote filename in HTTP Content-Disposition: header
gitweb: Add git_url subroutine, and use it to quote full URLs
gitweb: Split validate_input into validate_pathname and validate_refname
gitweb: Use "return" instead of "return undef" for some subs
gitweb: Strip trailing slashes from $path in git_get_hash_by_path
gitweb: extend blame to show links to diff and previous
gitweb: Remove redundant "tree" link
gitweb: tree view: eliminate redundant "blob"
gitweb: tree view: hash_base and hash are now context sensitive
In tree view, by default, hash_base is HEAD and hash is the
entry equivalent. Else the user had selected a hash_base or
hash, say by clicking on a revision or commit, in which case
those values are used.
Signed-off-by: Luben Tuikov <ltuikov@yahoo.com> Signed-off-by: Junio C Hamano <junkio@cox.net>
The distinction between BASIC_ vs ALL_ is still kept, since it
is not Git.xs specific -- we could face the same issue when we
do other language bindings (e.g. Python).
Fix approxidate() to understand 12:34 AM/PM are 00:34 and 12:34
It just simplifies the whole thing to say
"hour = (hour % 12) + X"
where X is 12 for PM and 0 for AM.
It also fixes the "exact date" parsing, which didn't parse AM at all, and
as such would do the same "12:30 AM" means "12:30 24-hour-format" bug. Of
course, I hope that no exact dates use AM/PM anyway, but since we support
the PM format, let's just get it right.
Signed-off-by: Linus Torvalds <torvalds@osdl.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
diff --stat: ensure at least one '-' for deletions, and one '+' for additions
The number of '-' and '+' is still linear. The idea is that
scaled-length := floor(a * length + b) with the following constraints: if
length == 1, scaled-length == 1, and the combined length of plusses
and minusses should not be larger than the width by a small margin. Thus,
a + b == 1
and
a * max_plusses + b + a * max_minusses + b = width + 1
The solution is
a * x + b = ((width - 1) * (x - 1) + max_change - 1)
/ (max_change - 1)
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de> Signed-off-by: Junio C Hamano <junkio@cox.net>
Remove redundant "commit" from history -- it can be had
by clicking on the title of the commit. This commit
makes visualization consistent with shortlog, log, etc.
Signed-off-by: Luben Tuikov <ltuikov@yahoo.com> Signed-off-by: Junio C Hamano <junkio@cox.net>
http/ftp: optionally ask curl to not use EPSV command
If http.noEPSV config variable is defined and true, or if
GIT_CURL_FTP_NO_EPSV environment variable is defined, disable using
of EPSV ftp command (PASV will be used instead). This is helpful with
some "poor" ftp servers which does not support EPSV mode.
Signed-off-by: Sasha Khapyorsky <sashak@voltaire.com> Signed-off-by: Junio C Hamano <junkio@cox.net>
gitweb: Don't use quotemeta on internally generated strings
Do not use quotemeta on internally generated strings
such as filenames of snapshot, blobs, etc.
quotemeta quotes any characters not matching /A-Za-z_0-9/.
Which means that we get strings like this:
When displaying a list of rows (difftree, shortlog, etc),
the first entry is now printed shaded, i.e. alternate is
initialized to 1, as opposed to non-shaded (alternate
initialized to 0).
This solves the problem when there is only one row to
display -- it is displayed shaded to visually indicate that
it is "active", part of a "list", etc.
(Compare this to the trivial case of more than one entry,
where the rows have alternating shade, thus suggesting
being part of a "list" of "active" entries, etc.)
Signed-off-by: Luben Tuikov <ltuikov@yahoo.com> Signed-off-by: Junio C Hamano <junkio@cox.net>
Our approxidate cannot handle simple times like "5 PM yesterday", and to
fix that, we will need to add some logic for number handling. This just
splits that out into a function of its own (the same way the _real_ date
parsing works).
Signed-off-by: Linus Torvalds <torvalds@osdl.org> Signed-off-by: Junio C Hamano <junkio@cox.net>