Earlier we added "-Wformat-security" to developer builds, assuming
that "-Wall" (which includes "-Wformat" which in turn is required
to use "-Wformat-security") is always in effect. This is not true
when config.mak.autogen is in use, unfortunately. This has been
fixed by unconditionally adding "-Wall" to developer builds.
* jk/dev-build-format-security:
config.mak.dev: add -Wall, primarily for -Wformat, to help autoconf users
"git cherry-pick -m1" was forbidden when picking a non-merge
commit, even though there _is_ parent number 1 for such a commit.
This was done to avoid mistakes back when "cherry-pick" was about
picking a single commit, but is no longer useful with "cherry-pick"
that can pick a range of commits. Now the "-m$num" option is
allowed when picking any commit, as long as $num names an existing
parent of the commit.
Technically this is a backward incompatible change; hopefully
nobody is relying on the error-checking behaviour.
* so/cherry-pick-always-allow-m1:
t3506: validate '-m 1 -ff' is now accepted for non-merge commits
t3502: validate '-m 1' argument is now accepted for non-merge commits
cherry-pick: do not error on non-merge commits when '-m 1' is specified
t3510: stop using '-m 1' to force failure mid-sequence of cherry-picks
"git worktree remove" and "git worktree move" refused to work when
there is a submodule involved. This has been loosened to ignore
uninitialized submodules.
* nd/worktree-remove-with-uninitialized-submodules:
worktree: allow to (re)move worktrees with uninitialized submodules
The test suite tried to see if it is run under bash, but the check
itself failed under some other implementations of shell (notably
under NetBSD). This has been corrected.
* sg/test-bash-version-fix:
test-lib: check Bash version for '-x' without using shell arrays
* rb/hpe:
compat/regex/regcomp.c: define intptr_t and uintptr_t on NonStop
git-compat-util.h: add FLOSS headers for HPE NonStop
config.mak.uname: support for modern HPE NonStop config.
transport-helper: drop read/write errno checks
transport-helper: use xread instead of read
With zsh, "git cmd path<TAB>" was completed to "git cmd path name"
when the completed path has a special character like SP in it,
without any attempt to keep "path name" a single filename. This
has been fixed to complete it to "git cmd path\ name" just like
Bash completion does.
* cy/zsh-completion-SP-in-path:
completion: treat results of git ls-tree as file paths
zsh: complete unquoted paths with spaces correctly
The core.worktree setting in a submodule repository should not be
pointing at a directory when the submodule loses its working tree
(e.g. getting deinit'ed), but the code did not properly maintain
this invariant.
* sb/submodule-unset-core-worktree-when-worktree-is-lost:
submodule deinit: unset core.worktree
submodule--helper: fix BUG message in ensure_core_worktree
submodule: unset core.worktree if no working tree is present
submodule update: add regression test with old style setups
"git log -G<regex>" looked for a hunk in the "git log -p" patch
output that contained a string that matches the given pattern.
Optimize this code to ignore binary files, which by default will
not show any hunk that would match any pattern (unless textconv or
the --text option is in effect, that is).
Lines that begin with a certain keyword that come over the wire, as
well as lines that consist only of one of these keywords, ought to
be painted in color for easier eyeballing, but the latter was
broken ever since the feature was introduced in 2.19, which has
been corrected.
* hn/highlight-sideband-keywords:
sideband: color lines with keyword only
"git checkout [<tree-ish>] path..." learned to report the number of
paths that have been checked out of the index or the tree-ish,
which gives it the same degree of noisy-ness as the case in which
the command checks out a branch.
* nd/checkout-noisy:
t0027: squelch checkout path run outside test_expect_* block
checkout: print something when checking out paths
The traversal over tree objects has learned to honor
":(attr:label)" pathspec match, which has been implemented only for
enumerating paths on the filesystem.
* nd/attr-pathspec-in-tree-walk:
tree-walk: support :(attr) matching
dir.c: move, rename and export match_attrs()
pathspec.h: clean up "extern" in function declarations
tree-walk.c: make tree_entry_interesting() take an index
tree.c: make read_tree*() take 'struct repository *'
"git rev-list --exclude-promisor-objects" had to take an object
that does not exist locally (and is lazily available) from the
command line without barfing, but the code dereferenced NULL.
* md/list-lazy-objects-fix:
list-objects.c: don't segfault for missing cmdline objects
Reported-by: Stefan Haller <stefan@haller-berlin.de> Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-am has the --keep-non-patch option to pass -b to
git-mailinfo for keeping subject prefixes intact. Allow
this option to be used with quiltimport as well.
Signed-off-by: Laura Abbott <labbott@redhat.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
worktree: allow to (re)move worktrees with uninitialized submodules
Uninitialized submodules have nothing valueable for us to be worried
about. They are just SHA-1. Let "worktree remove" and "worktree move"
continue in this case so that people can still use multiple worktrees
on repos with optional submodules that are never populated, like
sha1collisiondetection in git.git when checked out by doc-diff script.
Note that for "worktree remove", it is possible that a user
initializes a submodule (*), makes some commits (but not push), then
deinitializes it. At that point, the submodule is unpopulated, but the
precious new commits are still in
directory and we should not allow removing the worktree or we lose
those commits forever. The new directory check is added to prevent
this.
(*) yes they are screwed anyway by doing this since "git submodule"
would add submodule.* in $GIT_COMMON_DIR/config, which is shared
across multiple worktrees. But it does not mean we let them be
screwed even more.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
config.mak.dev: add -Wall, primarily for -Wformat, to help autoconf users
801fa63a90 ("config.mak.dev: add -Wformat-security", 2018-09-08)
added the "-Wformat-security" to the flags set in config.mak.dev.
In the gcc man page this is documented as:
If -Wformat is specified, also warn about uses of format
functions that represent possible security problems. [...]
The commit did however not add the "-Wformat" flag, but instead
relied on the fact that "-Wall" is set in the Makefile by default
and that "-Wformat" is part of "-Wall".
Unfortunately, those who use config.mak.autogen generated with the
autoconf to configure toolchain do *not* get "-Wall" in their CFLAGS
and the added -Wformat-security had no effect. Worse yet, newer
versions of gcc (gcc 8.2.1 in this particular case) warn about the
lack of "-Wformat" and thus compilation fails only with this option
set.
We could fix it by adding "-Wformat", but in general we do want all
checks included in "-Wall", so let's add it to config.mak.dev to
cover more cases.
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com> Helped-by: Jeff King <peff@peff.net> Helped-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The http-backend CGI process did not correctly clean up the child
processes it spawns to run upload-pack etc. when it dies itself,
which has been corrected.
* mk/http-backend-kill-children-before-exit:
http-backend: enable cleaning up forked upload/receive-pack on exit
A properly configured username/email is required under
user.useConfigOnly in order to create commits; now "git stash"
(even though it creates commit objects to represent stash entries)
command is exempt from the requirement.
* sd/stash-wo-user-name:
stash: tolerate missing user identity
Refspecs configured with "git -c var=val clone" did not propagate
to the resulting repository, which has been corrected.
* sg/clone-initial-fetch-configuration:
Documentation/clone: document ignored configuration variables
clone: respect additional configured fetch refspecs during initial fetch
clone: use a more appropriate variable name for the default refspec
"git checkout frotz" (without any double-dash) avoids ambiguity by
making sure 'frotz' cannot be interpreted as a revision and as a
path at the same time. This safety has been updated to check also
a unique remote-tracking branch 'frotz' in a remote, when dwimming
to create a local branch 'frotz' out of a remote-tracking branch
'frotz' from a remote.
* nd/checkout-dwim-fix:
checkout: disambiguate dwim tracking branches and local files
"git push $there $src:$dst" rejects when $dst is not a fully
qualified refname and not clear what the end user meant. The
codepath has been taught to give a clearer error message, and also
guess where the push should go by taking the type of the pushed
object into account (e.g. a tag object would want to go under
refs/tags/).
* ab/push-dwim-dst:
push doc: document the DWYM behavior pushing to unqualified <dst>
push: test that <src> doesn't DWYM if <dst> is unqualified
push: add an advice on unqualified <dst> push
push: move unqualified refname error into a function
push: improve the error shown on unqualified <dst> push
i18n: remote.c: mark error(...) messages for translation
remote.c: add braces in anticipation of a follow-up change
Small fixes and features for fast-export and fast-import, mostly on
the fast-export side.
* en/fast-export-import:
fast-export: add a --show-original-ids option to show original names
fast-import: remove unmaintained duplicate documentation
fast-export: add --reference-excluded-parents option
fast-export: ensure we export requested refs
fast-export: when using paths, avoid corrupt stream with non-existent mark
fast-export: move commit rewriting logic into a function for reuse
fast-export: avoid dying when filtering by paths and old tags exist
fast-export: use value from correct enum
git-fast-export.txt: clarify misleading documentation about rev-list args
git-fast-import.txt: fix documentation for --quiet option
fast-export: convert sha1 to oid
Code clean-up with optimization for the codepath that checks
(non-)existence of loose objects.
* jk/loose-object-cache:
odb_load_loose_cache: fix strbuf leak
fetch-pack: drop custom loose object cache
sha1-file: use loose object cache for quick existence check
object-store: provide helpers for loose_objects_cache
sha1-file: use an object_directory for the main object dir
handle alternates paths the same as the main object dir
sha1_file_name(): overwrite buffer instead of appending
rename "alternate_object_database" to "object_directory"
submodule--helper: prefer strip_suffix() to ends_with()
fsck: do not reuse child_process structs
The "http.version" configuration variable can be used with recent
enough cURL library to force the version of HTTP used to talk when
fetching and pushing.
* fc/http-version:
http: add support selecting http version
* nd/i18n:
fsck: mark strings for translation
fsck: reduce word legos to help i18n
parse-options.c: mark more strings for translation
parse-options.c: turn some die() to BUG()
parse-options: replace opterror() with optname()
repack: mark more strings for translation
remote.c: mark messages for translation
remote.c: turn some error() or die() to BUG()
reflog: mark strings for translation
read-cache.c: add missing colon separators
read-cache.c: mark more strings for translation
read-cache.c: turn die("internal error") to BUG()
attr.c: mark more string for translation
archive.c: mark more strings for translation
alias.c: mark split_cmdline_strerror() strings for translation
git.c: mark more strings for translation
compat/regex/regcomp.c: define intptr_t and uintptr_t on NonStop
The system definition header files on HPE NonStop do not define
intptr_t and uintptr_t as do other platforms. These typedefs
are added specifically wrapped in a __TANDEM ifdef.
Signed-off-by: Randall S. Becker <rsbecker@nexbridge.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-compat-util.h: add FLOSS headers for HPE NonStop
The HPE NonStop (a.k.a. __TANDEM) platform cannot build git without
using the FLOSS package supplied by HPE. The convenient location
for including the relevant headers is in this file.
The NSIG define is also not defined on __TANDEM, so we define it
here as 100 if it is not defined only for __TANDEM builds.
Signed-off-by: Randall S. Becker <rsbecker@nexbridge.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
config.mak.uname: support for modern HPE NonStop config.
A number of configuration options are not automatically detected by
configure mechanisms, including the location of Perl and Python.
There was a problem at a specific set of operating system versions
that caused getopt to have compile errors. Account for this by
providing emulation defines for those versions.
Signed-off-by: Randall S. Becker <rsbecker@nexbridge.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since we use xread() and xwrite() here, EINTR, EAGAIN, and
EWOULDBLOCK retries are already handled for us, and we will
never see these errno values ourselves. We can drop these
conditions entirely, making the code easier to follow.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
This fix was needed on HPE NonStop NSE and NSX where SSIZE_MAX is less than
BUFFERSIZE resulting in EINVAL. The call to read in transport-helper.c
was the only place outside of wrapper.c where it is used instead of xread.
Signed-off-by: Randall S. Becker <rsbecker@nexbridge.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
test-lib: check Bash version for '-x' without using shell arrays
One of our test scripts, 't1510-repo-setup.sh' [1], still can't be
reliably run with '-x' tracing enabled, unless it's executed with a
Bash version supporting BASH_XTRACEFD (since v4.1). We have a lengthy
condition to check the version of the shell running the test script,
and disable tracing if it's not executed with a suitable Bash version
[2].
This condition uses non-portable shell array accesses to easily get
Bash's major and minor version number. This didn't seem to be
problematic, because the simple commands expanding those array
accesses are only executed when the test script is actually run with
Bash. When run with Dash, the only shell I have at hand that doesn't
support shell arrays, there are no issues, as it apparently skips
right over the non-executed simple commands without noticing the
non-supported constructs.
Alas, it has been reported that NetBSD's /bin/sh does complain about
them:
./test-lib.sh: 327: Syntax error: Bad substitution
where line 327 contains the first ${BASH_VERSINFO[0]} array access.
To my understanding both shells are right and conform to POSIX,
because the standard allows both behaviors by stating the following
under '2.8.1 Consequences of Shell Errors' [3]:
"An expansion error is one that occurs when the shell expansions
define in wordexp are carried out (for example, "${x!y}", because
'!' is not a valid operator); an implementation may treat these as
syntax errors if it is able to detect them during tokenization,
rather than during expansion."
Avoid this issue with NetBSD's /bin/sh (and potentially with other,
less common shells) by hiding the shell array syntax behind 'eval'
that is only executed with Bash.
[1] 5827506928 (t1510-repo-setup: mark as untraceable with '-x',
2018-02-24)
[2] 5fc98e79fc (t: add means to disable '-x' tracing for individual
test scripts, 2018-02-24)
[3] http://pubs.opengroup.org/onlinepubs/9699919799/utilities/V3_chap02.html#tag_18_08_01
Reported-by: Max Kirillov <max@max630.net> Helped-by: Johannes Sixt <j6t@kdbg.org> Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
completion: treat results of git ls-tree as file paths
Let's say there are files named 'foo bar.txt', and 'abc def/test.txt' in
repository. When following commands trigger a completion:
git show HEAD:fo<Tab>
git show HEAD:ab<Tab>
The completion results in bash/zsh:
git show HEAD:foo bar.txt
git show HEAD:abc def/
Where the both of them have an unescaped space in paths, so they'll be
misread by git. All entries of git ls-tree either a filename or a
directory, so __gitcomp_file() is proper rather than __gitcomp_nl().
Note the commit f12785a3, which handles quoted paths properly. Like this
case, we should dequote $cur_ for ?*:* case. For example, let's say
there is untracked directory 'abc deg', then trigger a completion:
git show HEAD:abc\ de<Tab>
git show HEAD:'abc de<Tab>
git show HEAD:"abc de<Tab>
should uniquely complete 'abc def', but bash completes 'abc def' and
'abc deg' instead. In zsh, triggering a completion:
git show HEAD:abc\ def/<Tab>
should complete 'test.txt', but nothing comes. The both problems will be
resolved by dequoting paths.
__git_complete_revlist_file() passes arguments to __gitcomp_nl() where
the first one is a list something like:
abc def/Z
foo bar.txt Z
where Z is the mark of the EOL.
- The trailing space of blob in __git ls-tree | sed.
It makes the completion results become:
git show HEAD:foo\ bar.txt\ <CURSOR>
So git will try to find a file named 'foo bar.txt ' instead.
- The trailing slash of tree in __git ls-tree | sed.
It makes the completion results on zsh become:
git show HEAD:abc\ def/ <CURSOR>
So that the last space on command like should be removed on zsh to
complete filenames under 'abc def/'.
Signed-off-by: Chayoung You <yousbe@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
zsh: complete unquoted paths with spaces correctly
The following is the description of -Q flag of zsh compadd [1]:
This flag instructs the completion code not to quote any
metacharacters in the words when inserting them into the command
line.
Let's say there is a file named 'foo bar.txt' in repository, but it's
not yet added to the repository. Then the following command triggers a
completion:
The first one, where the pathname is not enclosed in quotes, should
escape the space with a backslash, just like bash completion does.
Otherwise, this leads git to think there are two files; foo, and
bar.txt.
The main cause of this behavior is __gitcomp_file_direct(). The both
implementions of bash and zsh are called with an argument 'foo bar.txt',
but only bash adds a backslash before a space on command line.
Simplify handling of setup_git_directory_gently() failure cases.
setup_git_directory_gently() expects two types of failures to
discover a git directory (e.g. .git/):
- GIT_DIR_HIT_CEILING: could not find a git directory in any
parent directories of the cwd.
- GIT_DIR_HIT_MOUNT_POINT: could not find a git directory in
any parent directories up to the mount point of the cwd.
Both cases are handled in a similar way, but there are misleading
and unimportant differences. In both cases, setup_git_directory_gently()
should:
- Die if we are not in a git repository. Otherwise:
- Set nongit_ok = 1, indicating that we are not in a git repository
but this is ok.
- Call strbuf_release() on any non-static struct strbufs that we
allocated.
Before this change are two misleading additional behaviors:
- GIT_DIR_HIT_CEILING: setup_nongit() changes to the cwd for no
apparent reason. We never had the chance to change directories
up to this point so chdir(current cwd) is pointless.
- GIT_DIR_HIT_MOUNT_POINT: strbuf_release() frees the buffer
of a static struct strbuf (cwd). This is unnecessary because the
struct is static so its buffer is always reachable. This is also
misleading because nowhere else in the function is this buffer
released.
This change eliminates these two misleading additional behaviors and
deletes setup_nogit() because the code is clearer without it. The
result is that we can see clearly that GIT_DIR_HIT_CEILING and
GIT_DIR_HIT_MOUNT_POINT lead to the same behavior (ignoring the
different help messages).
During review, this change was amended to additionally include:
- Neither GIT_DIR_HIT_CEILING nor GIT_DIR_HIT_MOUNT_POINT may
return early from setup_git_directory_gently() before the
GIT_PREFIX environment variable is reset. Change both cases to
break instead of return. See GIT_PREFIX below for more details.
- GIT_DIR_NONE: setup_git_directory_gently_1() never returns this
value, but if it ever did, setup_git_directory_gently() would
incorrectly record that it had found a repository. Explicitly
BUG on this case because it is underspecified.
- GIT_PREFIX: this environment variable must always match the
value of startup_info->prefix and the prefix returned from
setup_git_directory_gently(). Make how we handle this slightly
more repetitive but also more clear.
- setup_git_env() and repo_set_hash_algo(): Add comments showing
that only GIT_DIR_EXPLICIT, GIT_DIR_DISCOVERED, and GIT_DIR_BARE
will cause setup_git_directory_gently() to call these setup
functions. This was obvious (but partly incorrect) before this
change when GIT_DIR_HIT_MOUNT_POINT returned early from
setup_git_directory_gently().
When writing a commit-graph, we write GRAPH_MISSING_PARENT if the
parent's object id does not appear in the list of commits to be
written into the commit-graph. This was done as the initial design
allowed commits to have missing parents, but the final version
requires the commit-graph to be closed under reachability. Thus,
this GRAPH_MISSING_PARENT value should never be written.
However, there are reasons why it could be written! These range
from a bug in the reachable-closure code to a memory error causing
the binary search into the list of object ids to fail. In either
case, we should fail fast and avoid writing the commit-graph file
with bad data.
Remove the GRAPH_MISSING_PARENT constant in favor of the constant
GRAPH_EDGE_LAST_MASK, which has the same value.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
strncat() has the same quadratic behavior as strcat() and is
difficult-to-read and bug-prone. While it hasn't yet been a
problem in git iself, strncat() found it's way into 'master'
of cgit and caused segfaults on my system.
Signed-off-by: Eric Wong <e@80x24.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
doc/config: do a better job of introducing 'worktree.guessRemote'
The documentation for this option jumps right in with "With `add`",
without explaining that `add` is a sub-command of "git worktree".
Together with rather odd grammatical structure of the remainder of the
sentence, the description can be difficult for newcomers to understand.
Clarify by improving the grammar and mentioning "git worktree add"
explicitly.
Reported-by: Олег Самойлов <splarv@ya.ru> Signed-off-by: Eric Sunshine <sunshine@sunshineco.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
v2.11.0-rc3~3^2~1 (stripspace: respect repository config, 2016-11-21)
improved stripspace --strip-comments / --comentlines by teaching them
to read repository config, but it went a little too far: when running
stripspace outside any repository, the result is
$ git stripspace --strip-comments <test-input
fatal: not a git repository (or any parent up to mount point /tmp)
That makes experimenting with the stripspace command unnecessarily
fussy. Fix it by discovering the git directory gently, as intended
all along.
Reported-by: Han-Wen Nienhuys <hanwen@google.com> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-status.txt: render tables correctly under Asciidoctor
Asciidoctor removes the indentation of each line in these tables, so the
last lines of each table have a completely broken alignment.
Similar to 379805051d ("Documentation: render revisions correctly under
Asciidoctor", 2018-05-06), use an explicit literal block to indicate
that we want to keep the leading whitespace in the tables.
Because this gives us some extra indentation, we can remove the one that
we have been carrying explicitly. That is, drop the first four spaces of
indentation on each line. With Asciidoc (8.6.10), this results in
identical rendering before and after this commit, both for git-status.1
and git-status.html.
Signed-off-by: Martin Ågren <martin.agren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
It appears we try to nest open blocks, but that does not work well with
Asciidoctor, which fails to indent the inner blocks. As a result, they
do not visually seem to relate (as much) to the preceding paragraph as
they should. Drop the outer blocks to fix the rendering of the inner
ones. Asciidoc renders identically before and after this patch, both
man-pages and html.
This also makes Asciidoctor stop rendering a literal '+' before "Under
--pretty=oneline ..." in the manuals for git-log and git-rev-list.
Signed-off-by: Martin Ågren <martin.agren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
We have too few dashes under "Examples", which causes Asciidoctor to not
pick it up as a section header. Instead, it thinks we are starting a
code listing block, which ends up containing the remainder of the
document. The result is quite ugly.
Make sure we have as many dashes as we have characters in "Examples".
Asciidoc renders identically before and after this patch, both man-page
and html.
Signed-off-by: Martin Ågren <martin.agren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
git clone <url> C:\cygwin\home\USER\repo' is working (again)
A regression for cygwin users was introduced with commit 05b458c,
"real_path: resolve symlinks by hand".
In the the commit message we read:
The current implementation of real_path uses chdir() in order to resolve
symlinks. Unfortunately this isn't thread-safe as chdir() affects a
process as a whole...
The old (and non-thread-save) OS calls chdir()/pwd() had been
replaced by a string operation.
The cygwin layer "knows" that "C:\cygwin" is an absolute path,
but the new string operation does not.
The solution is to implement has_dos_drive_prefix(), skip_dos_drive_prefix()
is_dir_sep(), offset_1st_component() and convert_slashes() for cygwin
in the same way as it is done in 'Git for Windows' in compat/mingw.[ch]
Extract the needed code into compat/win32/path-utils.[ch] and use it
for cygwin as well.
Reported-by: Steven Penny <svnpenn@gmail.com> Helped-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Torsten Bögershausen <tboegi@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The -G<regex> option of log looks for the differences whose patch text
contains added/removed lines that match regex.
Currently -G looks also into patches of binary files (which
according to [1]) is binary as well.
This has a couple of issues:
- It makes the pickaxe search slow. In a proprietary repository of the
author with only ~5500 commits and a total .git size of ~300MB
searching takes ~13 seconds
$time git log -Gwave > /dev/null
real 0m13,241s
user 0m12,596s
sys 0m0,644s
whereas when we ignore binary files with this patch it takes ~4s
$time ~/devel/git/git log -Gwave > /dev/null
real 0m3,713s
user 0m3,608s
sys 0m0,105s
which is a speedup of more than fourfold.
- The internally used algorithm for generating patch text is based on
xdiff and its states in [1]
> The output format of the binary patch file is proprietary
> (and binary) and it is basically a collection of copy and insert
> commands [..]
which means that the current format could change once the internal
algorithm is changed as the format is not standardized. In addition
the git binary patch format used for preparing patches for git apply
is *different* from the xdiff format as can be seen by comparing
To resolve these issues this patch makes -G<regex> ignore binary files
by default. Textconv filters are supported and also -a/--text for
getting the old and broken behaviour back.
The -S<block of text> option of log looks for differences that changes
the number of occurrences of the specified block of text (i.e.
addition/deletion) in a file. As we want to keep the current behaviour,
add a test to ensure it stays that way.
[1]: http://www.xmailserver.org/xdiff.html
Signed-off-by: Thomas Braun <thomas.braun@virtuell-zuhause.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
cherry-pick: do not error on non-merge commits when '-m 1' is specified
When cherry-picking multiple commits, it's impossible to have both
merge- and non-merge commits on the same command-line. Not specifying
'-m 1' results in cherry-pick refusing to handle merge commits, while
specifying '-m 1' fails on non-merge commits.
This patch allows '-m 1' for non-merge commits. As mainline is always
the only parent for a non-merge commit, it makes little sense to
disable it.
Signed-off-by: Sergey Organov <sorganov@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a submodule is deinit'd, the working tree is gone, so the setting of
core.worktree is bogus. Unset it. As we covered the only other case in
which a submodule loses its working tree in the earlier step
(i.e. switching branches of top-level project to move to a commit that did
not have the submodule), this makes the code always maintain
core.worktree correctly unset when there is no working tree
for a submodule.
This re-introduces 984cd77ddb (submodule deinit: unset core.worktree,
2018-06-18), which was reverted as part of f178c13fda (Revert "Merge
branch 'sb/submodule-core-worktree'", 2018-09-07)
The whole series was reverted as the offending commit e98317508c
(submodule: ensure core.worktree is set after update, 2018-06-18)
was relied on by other commits such as 984cd77ddb.
Keep the offending commit reverted, but its functionality came back via 4d6d6ef1fc (Merge branch 'sb/submodule-update-in-c', 2018-09-17), such
that we can reintroduce 984cd77ddb now.
Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
submodule: unset core.worktree if no working tree is present
When a submodules work tree is removed, we should unset its core.worktree
setting as the worktree is no longer present. This is not just in line
with the conceptual view of submodules, but it fixes an inconvenience
for looking at submodules that are not checked out:
git clone --recurse-submodules git://github.com/git/git && cd git &&
git checkout --recurse-submodules v2.13.0
git -C .git/modules/sha1collisiondetection log
fatal: cannot chdir to '../../../sha1collisiondetection': \
No such file or directory
With this patch applied, the final call to git log works instead of dying
in its setup, as the checkout will unset the core.worktree setting such
that following log will be run in a bare repository.
This patch covers all commands that are in the unpack machinery, i.e.
checkout, read-tree, reset. A follow up patch will address
"git submodule deinit", which will also make use of the new function
submodule_unset_core_worktree(), which is why we expose it in this patch.
This patch was authored as 4fa4f90ccd (submodule: unset core.worktree if
no working tree is present, 2018-06-12), which was reverted as part of f178c13fda (Revert "Merge branch 'sb/submodule-core-worktree'",
2018-09-07). The revert was needed as the nearby commit e98317508c
(submodule: ensure core.worktree is set after update, 2018-06-18) is
faulty and at the time of 7e25437d35 (Merge branch
'sb/submodule-core-worktree', 2018-07-18) we could not revert the faulty
commit only, as they were depending on each other: If core.worktree is
unset, we have to have ways to ensure that it is set again once
the working tree reappears again.
Now that 4d6d6ef1fc (Merge branch 'sb/submodule-update-in-c', 2018-09-17),
specifically 74d4731da1 (submodule--helper: replace
connect-gitdir-workingtree by ensure-core-worktree, 2018-08-13) is
present, we already check and ensure core.worktree is set when
populating a new work tree, such that we can re-introduce the commits
that unset core.worktree when removing the worktree.
Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
submodule update: add regression test with old style setups
As f178c13fda (Revert "Merge branch 'sb/submodule-core-worktree'",
2018-09-07) was produced shortly before a release, nobody asked for
a regression test to be included. Add a regression test that makes sure
that the invocation of `git submodule update` on old setups doesn't
produce errors as pointed out in f178c13fda.
The place to add such a regression test may look odd in t7412, but
that is the best place as there we setup old style submodule setups
explicitly.
Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
Git 2.20.1
.gitattributes: ensure t/oid-info/* has eol=lf
t9902: 'send-email' test case requires PERL
t4256: mark support files as LF-only
parse-options: fix SunCC compiler warning
help -a: handle aliases with long names gracefully
help.h: fix coding style
run-command: report exec failure
The new test_oid machinery in the test library requires reading
some information from t/oid-info/hash-info and t/oid-info/oid.
The logic to read from these files in shell uses built-in "read"
command, which leaves CR at the end of these text files when they
are checked out with CRLF line endings, at least when run with bash
shipped with Git for Windows. This results in an unexpected value
in the variable these lines are read into, leading the tests to
fail.
Mark them to be checked out always with the LF line endings.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The oneline notwithstanding, 13374987dd (completion: use _gitcompbuiltin
for format-patch, 2018-11-03) changed also the way send-email options
are completed, by asking the git send-email command itself what options
it offers.
Necessarily, this must fail when built with NO_PERL because send-email
itself is a Perl script. Which means that we need the PERL prerequisite
for the send-email test case in t9902.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
submodule update: run at most one fetch job unless otherwise set
In a028a1930c (fetching submodules: respect `submodule.fetchJobs`
config option, 2016-02-29), we made sure to keep the default
behavior of fetching at most one submodule at once when not setting
the newly introduced `submodule.fetchJobs` config.
This regressed in 90efe595c5 (builtin/submodule--helper: factor
out submodule updating, 2018-08-03). Fix it.
Reported-by: Sjon Hortensius <sjon@parse.nl> Signed-off-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The test t4256-am-format-flowed.sh requires carefully applying a
patch after ignoring padding whitespace. This breaks if the file
is munged to include CRLF line endings instead of LF.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The compiler reports this because show_gitcomp() never actually
returns a value:
"parse-options.c", line 520: warning: Function has no return
statement : show_gitcomp
We could shut the compiler up. But instead let's not bury exit() too
deep. Do the same as internal -h handling, return a special error code
and handle the exit() in parse_options() (and other
parse_options_step() callers) instead.
Reported-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
help -a: handle aliases with long names gracefully
We take pains to determine the longest command beforehand, so that we
can align the category column after printing the command names.
However, then we re-use that value when printing the aliases. If any
alias name is longer than the longest command name, we consequently try
to add a negative number of spaces (but `mput_char()` does not expect
any negative values and simply decrements until the value is 0, i.e.
it tries to add close to 2**31 spaces).
Let's fix this by adjusting the `longest` variable before printing the
aliases.
This fixes https://github.com/git-for-windows/git/issues/1975.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 321fd823 ("run-command: mark path lookup errors with ENOENT",
2018-10-24), we rewrote the logic to execute a command by looking
in the directories on $PATH; as a side effect, a request to run a
command that is not found on $PATH is noticed even before a child
process is forked to execute it.
We however stopped to report an exec failure in such a case by
mistake. Add a logic to report the error unless silent-exec-failure
is requested, to match the original code.
Reported-by: John Passaro <john.a.passaro@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>