This patch changes git-cvsimport-script so that it creates tag objects
instead of refs to commits, and adds an option, -u, to convert
underscores in branch and tag names to dots (since CVS doesn't allow
dots in branches and tags.)
[PATCH] Make git-apply understand incomplete lines in non-C locales
The message "\ No newline at end of file" used by diff(1) to mark
an incomplete line is locale dependent. We can't assume more than
that it begins with "\ ".
For example, given two files, "foo" and "bar", with appropriate
contents, 'diff -u foo bar' will produce the following output on
my system:
--- foo 2005-09-04 18:59:38.000000000 +0200
+++ bar 2005-09-04 18:59:16.000000000 +0200
@@ -1 +1 @@
-foobar
+foo
\ Ingen nyrad vid filslut
[jc: the check for the marker still uses the line length being no less
than 12 bytes for a sanity check, but I think it is safe to assume
that in other locales. I haven't checked the .po files from diff, tho'.]
Signed-off-by: Fredrik Kuivinen <freku045@student.liu.se> Signed-off-by: Junio C Hamano <junkio@cox.net>
[PATCH] archimport: avoid committing on an Arch tag
Arch tags are full commits (without any changed files) as well. Trust Arch
to have put an unchanged tree in place (which seems to do reliably), and
just add a tag & new branch. Speeds up Arch imports significantly, and leaves
history in a much saner state.
Signed-off-by: Martin Langhoff <martin@catalyst.net.nz> Signed-off-by: Junio C Hamano <junkio@cox.net>
[PATCH] NUL terminate the object data in patch_delta()
At least pretty_print_commit() expects to get NUL-terminated commit data to
work properly. unpack_sha1_rest(), which reads objects from separate files,
and unpack_non_delta_entry(), which reads non-delta-compressed objects from
pack files, already add the NUL byte after the object data, but patch_delta()
did not do it, which caused problems with, e.g., git-rev-list --pretty when
there are delta-compressed commit objects.
Signed-off-by: Sergey Vlasov <vsu@altlinux.ru> Signed-off-by: Junio C Hamano <junkio@cox.net>
[PATCH] Doc: replace read-cache with git-read-tree.
Replace references to "read-cache" with references to git-read-tree in the
documentation. I chose that because reference say "see read-cache about
stages", and stages are explained in git-read-tree.
Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: Junio C Hamano <junkio@cox.net>
Mention post-update when we first talk about publishing a repository.
There is more detailed instruction for `project lead` later in
the tutorial to talk about the same, but at this point in the
flow of tutorial, the first time reader has no way of knowing it.
Double-equal is accepted by bash built-in '[' and bash(1) suggests
using '=' for strict POSIX compliance (test(1) from coreutils does not
mention '=='). Eradicate their uses everywhere.
[jc: Somebody with a pseudonym kindly sent a message to let
me know about the problem privately; I do not have access to a NetBSD
box.]
The rewrite done while adding the shorthand support made the remote
refname recorded in the commit message too long for human consumption,
while losing information by using the shorthand not the real URL to
name the remote repository there. They were both bad changes done
without enough thinking.
[PATCH] Explain what went wrong on update-cache of new file
If somebody tries to run `git update-cache foo', where foo is a new
file, git dies with a rather cryptic error message:
fatal: Unable to add foo to database
This trivial patch makes git explain what probably went wrong. It is
not a perfect diagnosis of all error paths, but for 90% of the cases it
should provide the user with the clue they need.
[jc: I ended up wording slightly differently, and fixed another
confusing error message I noticed while reviewing the code.]
Signed-off-by: Amos Waterland <apw@rossby.metr.ou.edu> Signed-off-by: Junio C Hamano <junkio@cox.net>
It used 'die' without including git-sh-setup-script; since everything
it uses are subdirectory-aware, instead of including the script to
force it to be run from the top, use echo & exit.
Finally I bit the bullet and did a full sweep of this document.
The changes are mostly clarifications, adjusting old terminology
to the glossary compatible one, and asciidoc formatting.
Imports a project history from one or more Arch repositories, following
the branching and tagging across repositories. Note you should import
separate projects to separate GIT repositories.
Supported
- Imports, tags and simple commits.
- File renames
- Arch tags
- Binary files
- Large trees
- Multiple repositories
- Branches
TODO:
- Allow re-running the import on an already-imported project
- Follow merges using Arch data
- Audit shell escaping of filenames
- Better support for file metadata
- Better/safer creation of temp directories
Unsupported:
- Arch 'configuration'
[jc: my arch/tla is very rusty and after Tom announced he is stepping
down as the maintainer I have very little motivation to relearn it,
so I would appreciate if people discuss any bugs or enhancements
directly with Martin. Of course I can help with the git end of the
issues.]
Signed-off-by: Martin Langhoff <martin@catalyst.net.nz> Signed-off-by: Junio C Hamano <junkio@cox.net>
I'm testing bisection to find a bug that causes my G5 to no longer boot,
and during the process have found this command line very nice:
gitk bisect/bad --not $(cd .git/refs ; ls bisect/good-*)
it basically shows the state of bisection with the known bad commit as the
top, and cutting off all the good commits - so what you see are the
potential buggy commits.
When testing bisection and using gitk to visualize the result, it was
obvious that the termination condition was broken.
We know what the bad entry is only when the bisection ends up telling us
to test the known-bad entry again.
Also, add a safety net: if somebody marks as good something that includes
the known-bad point, we now notice and complain, instead of writing an
empty revision to the new bisection branch.
Signed-off-by: Linus Torvalds <torvalds@osdl.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
parse-remote: trivial fix to allow refs/{heads,tags}/ spelled easier.
Earlier we always prefixed refs/heads to the token given to "git fetch"
(and "git pull") as refspec. This was a mistake. Allow them to be
spelled like "master:refs/tags/paulus" to mean "I want to fetch the
master there and store it as my local "paulus" tag.
When we resolve a merge between two branches, and it removes a file in the
current branch, we notify the person doing the resolve with a big nice
notice like
Removing xyzzy
which is all well and good.
HOWEVER, we also do this when the file was actually removed in the current
branch, and we're merging with another branch that didn't have it removed
(or, indeed, if the other branch _did_ have it removed, but the common
parent was far enough back that the file still existed in there).
And that just doesn't make sense. In that case we're not removing
anything: the file didn't exist in the branch we're merging into in the
first place. So the message just makes people nervous, and makes no sense.
This has been around forever, but I never bothered to do anything about
it.
Until now.
The trivial fix is to only talk about removing files if the file existed
in the branch we're merging into, but will not exist in the result.
Signed-off-by: Linus Torvalds <torvalds@osdl.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
Do not verify reverted/cherry-picked/rebased patches.
The original committer may have used validation criteria that is less
stricter than yours. You do not want to lose the changes even if they
are done in substandard way from your 'commit -v' verifier's point of
view.
git-repack-script: Add option to repack all objects.
This originally came from Frank Sorenson, but with a bit of rework to
allow future enhancements without changing the external interface for
pack pruning part.
With the '-a' option, all objects in the current repository are packed
into a single pack. When the '-d' option is given at the same time,
existing packs that were made redundant by this round of repacking are
deleted.
Since we currently have only two repacking strategies, one with '-a'
(everything into one) and the other without '-a' (incrementally pack
only the unpacked ones), the '-d' option is meaningful only when used
with '-a'; it removes the packs existed before we did the "everything
into one" repacking. At least for now.
Signed-off-by: Junio C Hamano <junkio@cox.net> Acked-by: Frank Sorenson <frank@tuxrocks.com>
(cherry picked from bfed505327e31221d8de796b3af880bad696b149 commit)
Earlier show-branch gave names only to commits reachable via first
parent ancestry chain. Change the naming code to name everybody.
The original idea was to stop at the first merge point in the
topological order, and --more=<n> to show commits until we show <n>
more extra merge points. However depending on the order of how we
discover the commits, it additionally showed parents of the <n>th
merge points, which was unnecessary.
This attempts to minimally cope with a subset of MIME "features" often
seen in patches sent to our mailing lists. Namely:
- People's name spelled in characters outside ASCII (both on From:
header and the signed-off-by line).
- Content-transfer-encoding using quoted-printable (both in
multipart and non-multipart messages).
These MIME features are detected and decoded by "git mailinfo".
Optionally, with the '-u' flag, the output to .info and .msg is
transliterated from its original chaset to utf-8. This is to
encourage people to use utf8 in their commit messages for
interoperability.
Applymbox accepts additional flag '-u' which is passed to mailinfo.
Signed-off-by: Junio C Hamano / 濱野 純 <junkio@cox.net>
Now the rebase is rewritten to use git cherry-pick, there is no user
for that ancient script. I've checked Cogito and StGIT to make sure
they do not use it.
The reverse patch application using "git apply" sometimes is too
rigid. Since the user would get used to resolving conflicting merges
by hand during the normal merge experience, using the same machinery
would be more helpful rather than just giving up.
Cherry-picking and reverting are essentially the same operation.
You pick one commit, and apply the difference that commit introduces
to its own commit ancestry chain to the current tree. Revert applies
the diff in reverse while cherry-pick applies it forward. They share
the same logic, just different messages and merge direction.
Not that I ignore portability to compilers that are properly C99, but
keeping compilation with GCC working is more important, at least for
now. We would probably end up declaring with "name[1]" and teach the
allocator to subtract one if we really aimed for portability, but that
is left for later rounds.
Teach git-status-script about git-ls-files --others
When there is non-empty $GIT_DIR/info/exclude file, use it along
with .gitignore per-directory exclude pattern files (which was
a convention agreed on the list while ago and is compatible with
Cogito) to generate a list of ignored files as well.
[PATCH] Make .git directory validation code test HEAD
Inspired by a report by Kalle Valo, this changes git-sh-setup-script and
the "setup_git_directory()" function to test that $GIT_DIR/HEAD is a
symlink, since a number of core git features depend on that these days.
We used to allow a regular file there, but git-fsck-cache has been
complaining about that for a while, and anything that uses branches
depends on the HEAD file being a symlink, so let's just encode that as a
fundamental requirement.
Before, a non-symlink HEAD file would appear to work, but have subtle bugs
like not having the HEAD show up as a valid reference (because it wasn't
under "refs"). Now, we will complain loudly, and the user can fix it up
trivially instead of getting strange behaviour.
This also removes the tests for "$GIT_DIR" and "$GIT_OBJECT_DIRECTORY"
being directories, since the other tests will implicitly test for that
anyway (ie the tests for HEAD, refs and 00 would fail).
Signed-off-by: Linus Torvalds <torvalds@osdl.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
When the "git pull" command updates the branch head you are
currently on, before doing anything else, first update your
index file and the working tree contents to that of the new
branch head. Otherwise, the later resolving steps would think
your index file is attempting to revert the change between the
original head commit and the updated head commit.
It uses two-tree fast-forward form of "read-tree -m -u" to
prevent losing whatever local changes you may have in the
working tree to do this update. I think this would at least
make things safer (a lot safer), and prevent mistakes.
Also "git fetch" command is forbidden from fetching and fast
forwarding the current branch head unless --update-head-ok flag
is given. "git pull" passes the flag when it internally calls
"git fetch".
You can define WITH_SEND_EMAIL to include the send-email command as
part of the installation. Since Debian, unlike RPM/Fedora, has the
two necessary Perl modules available as part of the mainline
distribution, there is no reason for us to shy away from shipping
send-email.
Gitzilla updated bunch of undocumented command pages, so move the
entries in the main documentation index around to put them in proper
category. Ordering within category will be fixed later.
Various updates and cleanups for my howto on using branches in GIT
as a Linux subsystem maintainer. Three categories of changes:
1) Updates for new features in GIT 0.99.5
2) Changes to use "git fetch" rather than "git pull" to update
local linus branch.
3) Cleanups suggested by Len Brown
Signed-off-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Junio C Hamano <junkio@cox.net>
The "verify_pathspec()" function doesn't test for ending NUL character in
the pathspec, causing some really funky and unexpected behaviour. It just
happened to work in the cases I had tested.
Signed-off-by: Linus Torvalds <torvalds@osdl.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
[PATCH] Allow "+remote:local" refspec to cause --force when fetching.
With this we could say:
Pull: master:ko-master +pu:ko-pu
to mean "fast forward ko-master with master, overwrite ko-pu with pu",
and the latter one does not require the remote "pu" to be descendant
of local "ko-pu".