$ git rebase master
Fast-forwarded autostash-fix to master.
The autostash is not applied automatically, because this codepath
forgets to call finish_rebase(). Fix this. Also add a test to guard
against regressions.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
use logical OR (||) instead of binary OR (|) in logical context
The compiler can short-circuit the evaluation of conditions strung
together with logical OR operators instead of computing the resulting
bitmask with binary ORs. More importantly, this patch makes the
intent of the changed code clearer, because the logical context (as
opposed to binary context) becomes immediately obvious.
While we're at it, simplify the check for patch->is_rename in
builtin/apply.c a bit; it can only be 0 or 1, so we don't need a
comparison operator.
Signed-off-by: René Scharfe <rene.scharfe@lsrfire.ath.cx> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Deduplicate code by moving tree_desc initialization into a helper
function, fill_tree_desc_strict. It is like fill_tree_descriptor,
except that it only accepts tree hashes and no tree references (tags,
commits). No functional change.
Signed-off-by: René Scharfe <rene.scharfe@lsrfire.ath.cx> Signed-off-by: Junio C Hamano <gitster@pobox.com>
rm: better error message on failure for multiple files
When 'git rm' fails, it now displays a single message
with the list of files involved, instead of displaying
a list of messages with one file each.
As an example, the old message:
error: 'foo.txt' has changes staged in the index
(use --cached to keep the file, or -f to force removal)
error: 'bar.txt' has changes staged in the index
(use --cached to keep the file, or -f to force removal)
would now be displayed as:
error: the following files have changes staged in the index:
foo.txt
bar.txt
(use --cached to keep the file, or -f to force removal)
Signed-off-by: Mathieu Lienard--Mayor <Mathieu.Lienard--Mayor@ensimag.imag.fr> Signed-off-by: Jorge Juan Garcia Garcia <Jorge-Juan.Garcia-Garcia@ensimag.imag.fr> Signed-off-by: Matthieu Moy <Matthieu.Moy@grenoble-inp.fr> Signed-off-by: Junio C Hamano <gitster@pobox.com>
When staging hunks interactively it is sometimes useful to use an
alternative diff algorithm which splits the changes into hunks in a more
logical manner. This is not possible because the plumbing commands
called by add--interactive ignore the "diff.algorithm" configuration
option (as they should).
Since add--interactive is a porcelain command it should respect this
configuration variable. To do this, make it read diff.algorithm and
pass its value to the underlying diff-index and diff-files invocations.
At this point, do not add options to "git add", "git reset" or "git
checkout" (all of which can call git-add--interactive). If a user
wants to override the value on the command line they can use:
git -c diff.algorithm=$ALGO ...
Signed-off-by: John Keeping <john@keeping.me.uk> Reviewed-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix `git svn` `rebase` & `dcommit` if top-level HEAD directory exist
When a file (or a directory) called HEAD exists in the working tree,
internal calls git svn makes trigger "did you mean a revision or a
path?" ambiguity check.
$ git svn rebase
fatal: ambiguous argument 'HEAD': both revision and filename
Use '--' to separate paths from revisions, like this:
'git <command> [<revision>...] -- [<file>...]'
rev-list --first-parent --pretty=medium HEAD: command returned error: 128
Explicitly disambiguate by adding "--" after the revision.
Signed-off-by: Slava Kardakov <ojab@ojab.ru> Reviewed-by: Jeff King <peff@peff.net> Acked-by: Eric Wong <normalperson@yhbt.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Blameview was a quick-and-dirty demonstration of how blame's
incremental output could be used in an interface. These days
one can find much better (and less ugly!) demonstrations in
"git gui blame" and "tig blame".
The only advantage blameview has is that its code is perhaps
simpler to read. However, that is balanced by the fact that
it probably has bugs, as nobody uses it nor has touched the
code in 6 years. An implementor is probably better off just
reading the "incremental output" section of "man git-blame".
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move create_notes_commit() from notes-merge.c into notes-utils.c
create_notes_commit() is needed by both the notes-merge code, and by
commit_notes() in notes-utils. Since it is generally useful, and not
bound to the notes-merge machinery, we move it from (the more specific)
notes-merge to (the more general) notes-utils.
Signed-off-by: Johan Herland <johan@herland.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move copy_note_for_rewrite + friends from builtin/notes.c to notes-utils.c
This is a pure code movement of the machinery for copying notes to
rewritten objects. This code was located in builtin/notes.c for
historical reasons. In order to make it available to builtin/commit.c
it was declared in builtin.h. This was more of an accident of history
than a concious design, and we now want to make this machinery more
widely available.
Hence, this patch moves the code into the new notes-utils.[hc] files
which are included into libgit.a. Except for adjusting #includes
accordingly, this patch merely moves the relevant functions verbatim
into the new files.
Cc: Thomas Rast <trast@inf.ethz.ch> Signed-off-by: Johan Herland <johan@herland.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
finish_copy_notes_for_rewrite(): Let caller provide commit message
When copying notes for a rewritten object, the resulting notes commit
would have the following hardcoded commit message:
Notes added by 'git notes copy'
This is obviously bogus when the notes rewriting is performed by
'git commit --amend'.
Therefore, let the caller specify an appropriate notes commit message
instead of hardcoding it. The above message is used for 'git notes copy',
but when calling finish_copy_notes_for_rewrite() from builtin/commit.c,
we use the following message instead:
Notes added by 'git commit --amend'
Cc: Thomas Rast <trast@inf.ethz.ch> Signed-off-by: Johan Herland <johan@herland.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use the prio-queue data structure to implement a priority queue of
commits sorted by committer date, when handling --date-order. The
structure can also be used as a simple LIFO stack, which is a good
match for --topo-order processing.
Traditionally we used a singly linked list of commits to hold a set
of in-flight commits while traversing history. The most typical use
of the list is to add commits that are newly discovered to it, keep
the list sorted by commit timestamp, pick up the newest one from the
list, and keep digging. The cost of keeping the singly linked list
sorted is nontrivial, and this typical use pattern better matches a
priority queue.
Introduce a prio-queue structure, that can be used either as a LIFO
stack, or a priority queue. This will be used in the next patch to
hold in-flight commits during sort-in-topological-order.
Tests and the idea to make it usable for any "void *" pointers to
"things" are by Jeff King. Bugs are mine.
The primary invariant of sort_in_topological_order() is that a
parent commit is not emitted until all children of it are. When
traversing a forked history like this with "git log C E":
A----B----C
\
D----E
we ensure that A is emitted after all of B, C, D, and E are done, B
has to wait until C is done, and D has to wait until E is done.
In some applications, however, we would further want to control how
these child commits B, C, D and E on two parallel ancestry chains
are shown.
Most of the time, we would want to see C and B emitted together, and
then E and D, and finally A (i.e. the --topo-order output). The
"lifo" parameter of the sort_in_topological_order() function is used
to control this behaviour. We start the traversal by knowing two
commits, C and E. While keeping in mind that we also need to
inspect E later, we pick C first to inspect, and we notice and
record that B needs to be inspected. By structuring the "work to be
done" set as a LIFO stack, we ensure that B is inspected next,
before other in-flight commits we had known that we will need to
inspect, e.g. E.
When showing in --date-order, we would want to see commits ordered
by timestamps, i.e. show C, E, B and D in this order before showing
A, possibly mixing commits from two parallel histories together.
When "lifo" parameter is set to false, the function keeps the "work
to be done" set sorted in the date order to realize this semantics.
After inspecting C, we add B to the "work to be done" set, but the
next commit we inspect from the set is E which is newer than B.
The name "lifo", however, is too strongly tied to the way how the
function implements its behaviour, and does not describe what the
behaviour _means_.
Replace this field with an enum rev_sort_order, with two possible
values: REV_SORT_IN_GRAPH_ORDER and REV_SORT_BY_COMMIT_DATE, and
update the existing code. The mechanical replacement rule is:
"lifo == 0" is equivalent to "sort_order == REV_SORT_BY_COMMIT_DATE"
"lifo == 1" is equivalent to "sort_order == REV_SORT_IN_GRAPH_ORDER"
git-remote-mediawiki: display message when launched directly
Users may be confused when they run the perl script directly.
A good way to detect this is to check the number of parameters used to call the
script, which is never different from 2 in a normal use.
Display a proper error message to avoid any confusion.
Signed-off-by: Célestin Matte <celestin.matte@ensimag.fr> Signed-off-by: Matthieu Moy <matthieu.moy@grenoble-inp.fr> Signed-off-by: Junio C Hamano <gitster@pobox.com>
t0070 "mktemp to unwritable directory" needs SANITY
Use the SANITY prerequisite when testing if a temp file can
be created in a read only directory.
Skip the test under CYGWIN, or skip it under Unix/Linux when
it is run as root.
Signed-off-by: Torsten Bögershausen <tboegi@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
"gitweb" forgot to clear a global variable $search_regexp upon each
request, mistakenly carrying over the previous search to a new one
when used as a persistent CGI.
* cm/gitweb-project-list-persistent-cgi-fix:
gitweb: fix problem causing erroneous project list
* rr/rebase-autostash:
rebase: implement --[no-]autostash and rebase.autostash
rebase --merge: return control to caller, for housekeeping
rebase -i: return control to caller, for housekeeping
am: return control to caller, for housekeeping
rebase: prepare to do generic housekeeping
rebase -i: don't error out if $state_dir already exists
am: tighten a conditional that checks for $dotest
"git cmd <name>", when <name> happens to be a 40-hex string,
directly uses the 40-hex string as an object name, even if a ref
"refs/<some hierarchy>/<name>" exists. This disambiguation order
is unlikely to change, but we should warn about the ambiguity just
like we warn when more than one refs/ hierachies share the same
name.
* nd/warn-ambiguous-object-name:
get_sha1: warn about full or short object names that look like refs
These days, "git --work-tree=there cmd" without specifying an
explicit --git-dir=here will do the usual discovery, but we had a
description of older behaviour in the documentation.
* cr/git-work-tree-sans-git-dir:
git.txt: remove stale comment regarding GIT_WORK_TREE
* fc/remote-bzr:
remote-bzr: add fallback check for a partial clone
remote-bzr: reorganize the way 'wanted' works
remote-bzr: trivial cleanups
remote-bzr: change global repo
remote-bzr: delay cloning/pulling
remote-bzr: simplify get_remote_branch()
remote-bzr: fix for files with spaces
remote-bzr: recover from failed clones
* rs/unpack-trees-plug-leak:
unpack-trees: free cache_entry array members for merges
diff-lib, read-tree, unpack-trees: mark cache_entry array paramters const
diff-lib, read-tree, unpack-trees: mark cache_entry pointers const
unpack-trees: create working copy of merge entry in merged_entry
unpack-trees: factor out dup_entry
read-cache: mark cache_entry pointers const
cache: mark cache_entry pointers const
Primarily to push out two regression issues that seem to affect many
people, namely, the ".gitignore !directory" bug and "daemon cannot
read from $HOME owned by root" bug.
Most users seem to like having colors enabled, and colors can help
beginners to understand the output of some commands (e.g. notice
immediately the boundary between commits in the output of "git log").
Many tutorials tell the users to set color.ui=auto as a very first step,
which tend to indicate that color.ui=none is not the recommanded value,
hence should not be the default.
These tutorials would benefit from skipping this step and starting the
real Git manipulations earlier. Other beginners do not know about
color.ui=auto, and may not discover it by themselves, hence live with
black&white outputs while they may have preferred colors.
A few people (e.g. color-blind) prefer having no colors, but they can
easily set color.ui=never for this (and googling "disable colors in git"
already tells them how to do so), but this needs not occupy space in
beginner-oriented documentations.
A transition period with Git emitting a warning when color.ui is unset
would be possible, but the discomfort of having the warning seems
superior to the benefit: users may be surprised by the change, but not
harmed by it.
The default value is changed, and the documentation is reworded to
mention "color.ui=false" first, since the primary use of color.ui after
this change is to disable colors, not to enable it.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Merge branch 'jn/config-ignore-inaccessible' into maint
A git daemon that starts as "root" and then drops privilege often
leaves $HOME set to that of the root user, which is unreadable by
the daemon process, which was diagnosed as a configuration error.
Make per-user configuration files that are inaccessible due to
EACCES as though these files do not exist to avoid this issue, as
the tightening which was originally meant as an additional security
has annoyed enough sysadmins.
* jn/config-ignore-inaccessible:
config: allow inaccessible configuration under $HOME
discard_cache doesn't have to free the array of cache entries, because
the next call of read_cache can simply reuse it, as they all operate on
the global variable the_index.
discard_index on the other hand does have to free it, because it can be
used e.g. with index_state variables on the stack, in which case a
missing free would cause an unrecoverable leak. This patch releases the
memory and removes a comment that was relevant for discard_cache but has
become outdated.
Since discard_cache is just a wrapper around discard_index nowadays, we
lose the optimization that avoids reallocation of that array within
loops of read_cache and discard_cache. That doesn't cause a performance
regression for me, however (HEAD = this patch, HEAD^ = master + p0002):
Test // HEAD^ HEAD
---------------\\-----------------------------------------------------
0002.1: read_ca// 1000 times 0.62(0.58+0.04) 0.61(0.58+0.02) -1.6%
Suggested-by: Felipe Contreras <felipe.contreras@gmail.com> Signed-off-by: René Scharfe <rene.scharfe@lsrfire.ath.cx> Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are quite a lot places where an output file is expected to be
empty, and we fail the test when it is not. The output from running
the test script with -i -v can be helped if we showed the unexpected
contents at that point.
We could of course do
>expected.empty && test_cmp expected.empty actual
but this is commmon enough to be done with a dedicated helper.
core: use env variable instead of config var to turn on logging pack access
5f44324 (core: log offset pack data accesses happened - 2011-07-06)
provides a way to observe pack access patterns via a config
switch. Setting an environment variable looks more obvious than a
config var, especially when you just need to _observe_, and more
inline with other tracing knobs we have.
Document it as it may be useful for remote troubleshooting.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The 'git show' completion uses __git_complete_file (aliased to
__git_complete_revlist_file), because accepts <tree-ish>:<path> as
well as <commit-ish>. But the command also accepts range of commits
in A..B notation, so using __git_complete_revlist_file is more
appropriate.
There still remain two users of __git_complete_file, completions for
"archive" and "ls-tree". As these commands do not take range
notation, and "git show" no longer uses __git_complete_file, the
implementation of it can be updated not to complete ranges, but that
is a separate topic.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 416fda6 (build: do not install git-remote-testpy) made it so
git-remote-testpy is not only not installed, but also not generated
by default. From a fresh checkout, "make --test=5800 test" would
have failed.
This was not found primarily because "make clean" failed to remove
git-remote-testpy, which is another bug in the same commit.
Fix the former by having 'all' target depend on $(NO_INSTALL) and
the latter by removing $(NO_INSTALL) in the 'clean' target.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Merge branch 'js/transport-helper-error-reporting-fix' into fc/makefile
* js/transport-helper-error-reporting-fix:
git-remote-testgit: build it to run under $SHELL_PATH
git-remote-testgit: further remove some bashisms
git-remote-testgit: avoid process substitution
t5801: "VAR=VAL shell_func args" is forbidden
transport-helper: update remote helper namespace
transport-helper: trivial code shuffle
transport-helper: warn when refspec is not used
transport-helper: clarify pushing without refspecs
transport-helper: update refspec documentation
transport-helper: clarify *:* refspec
transport-helper: improve push messages
transport-helper: mention helper name when it dies
transport-helper: report errors properly
git-gui: fix file name handling with non-empty prefix
Commit e3d06ca (git-gui: Detect full path when parsing arguments -
2012-10-02) fixed the handling of absolute paths passed to the browser
and blame subcommands by checking whether the file exists without the
prefix before prepending the prefix and checking again. Since we have
chdir'd to the top level of the working tree before doing this, this
does not work if a file with the same name exists in a subdirectory and
at the top level (for example Makefile in git.git's t/ directory).
Instead of doing this, revert that patch and fix absolute path issue by
using "file join" to prepend the prefix to the supplied path. This will
correctly handle absolute paths by skipping the prefix in that case.
Acked-by: Andrew Wong <andrew.kw.w@gmail.com> Signed-off-by: John Keeping <john@keeping.me.uk> Signed-off-by: Pat Thoyts <patthoyts@users.sourceforge.net>
The part of the test that is about symbolic links in the index does not
require that the corresponding file system entry is actually a symbolic
link. Use test_ln_s_add to insert a symbolic link in the index. When
the file system does not support symbolic links, we actually have a
regular file in the worktree, which we can update as if it were a
symbolic link. diff-index picks up the symbolic link property from the
index.
Signed-off-by: Johannes Sixt <j6t@kdbg.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
t6035: use test_ln_s_add to remove SYMLINKS prerequisite
All tests in t6035 are protected by SYMLINKS. But that is not necessary,
because a lot of the functionality can be tested provided symbolic link
entries enter the index and object data base. Use test_ln_s_add for this
purpose.
Some test cases do test the presence of symbolic links on the file system.
Move these tests into separate test cases that remain protected by
SYMLINKS.
There is one instance of expect_failure. There is a possibility that this
test case fails differently depending on whether SYMLINKS is present or
not; but this is not the case.
Signed-off-by: Johannes Sixt <j6t@kdbg.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
t3509, t4023, t4114: use test_ln_s_add to remove SYMLINKS prerequisite
In t4023 and t4114, we have to remove the entries using 'git rm' because
otherwise the entries that must turn from symbolic links to regular files
would stay symbolic links in the index. For the same reason, we have to
use 'git mv' instead of plain 'mv' in t3509.
Signed-off-by: Johannes Sixt <j6t@kdbg.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
t3030: use test_ln_s_add to remove SYMLINKS prerequisite
The test cases include many corner-cases of merge-recursive's behavior,
some of them involve type changes and symbolic links. All cases, including
those that are protected by SYMLINKS check only whether the result of
merge-recursive is correctly stored in the database and the index; the
file system is not investigated. Use test_ln_s_add to enter a symbolic
link in the index in the test setup and run the tests without the
SYMLINKS prerequisite.
Notice that one test that has the SYMLINKS protection removed is an
expect_failure. There is a possibility that the test fails differently
depending on whether SYMLINKS is present or not; but this is not the case
presently.
Signed-off-by: Johannes Sixt <j6t@kdbg.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
t0000: use test_ln_s_add to remove SYMLINKS prerequisite
t0000-basic hard-codes many object IDs. To cater to file systems that do
not support symbolic links, different IDs are used depending on the
SYMLINKS prerequisite. But we can observe the symbolic links are only
needed to generate index entries. Use test_ln_s_add to generate the
index entries and get rid of explicit SYMLINKS checks.
This undoes the special casing introduced in this test by 704a3143
(Use prerequisite tags to skip tests that depend on symbolic links,
2009-03-04).
Signed-off-by: Johannes Sixt <j6t@kdbg.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
tests: use test_ln_s_add to remove SYMLINKS prerequisite (trivial cases)
There are many instances where the treatment of symbolic links in the
object model and the algorithms are tested, but where it is not
necessary to actually have a symbolic link in the worktree. Make
adjustments to the tests and remove the SYMLINKS prerequisite when
appropriate in trivial cases, where "trivial" means:
- merely a replacement of 'ln -s a b && git add b' by test_ln_s_add
is needed;
- a test for symbolic link on the file system can be split off (and
remains protected by SYMLINKS);
- existing code is equivalent to test_ln_s_add.
Signed-off-by: Johannes Sixt <j6t@kdbg.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a new function that creates a symbolic link and adds it to the index
to be used in cases where a symbolic link is not required on the file
system. We will use it to remove many SYMLINKS prerequisites from test
cases.
Signed-off-by: Johannes Sixt <j6t@kdbg.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
commit-slab: introduce a macro to define a slab for new type
Introduce a header file to define a macro that can define the struct
type, initializer, accessor and cleanup functions to manage a commit
slab. Update the "indegree" topological sort facility using it.
To associate 32 flag bits with each commit, you can write:
define_commit_slab(flag32, uint32);
to declare "struct flag32" type, define an instance of it with
struct flag32 flags;
and initialize it by calling
init_flag32(&flags);
After that, a call to flag32_at() function
uint32 *fp = flag32_at(&flags, commit);
will return a pointer pointing at a uint32 for that commit. Once
you are done with these flags, clean them up with
clear_flag32(&flags);
Callers that cannot hard-code how wide the data to be associated
with the commit be at compile time can use the "_with_stride"
variant to initialize the slab.
Suppose you want to give one bit per existing ref, and paint commits
down to find which refs are descendants of each commit. Saying
tests: move test for rebase messages from t3400 to t3406
t3406 is supposed to test "messages from rebase operation", so let's
move tests in t3400 that fit that description into 3406. Most of the
functionality they tested, except for the messages, has now been
subsumed by t3420.
Signed-off-by: Martin von Zweigbergk <martinvonz@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
- Quote 'setup'
- Remove blank lines within test case body
- Use test_commit instead of custom quick_one
- Create branch "topic" from tag created by test_commit
Signed-off-by: Martin von Zweigbergk <martinvonz@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
gitweb: fix problem causing erroneous project list
The bug is manifest when running gitweb in a persistent process (e.g.
FastCGI, PSGI), and it's easy to reproduce. If a gitweb request
includes the searchtext parameter (i.e. s), subsequent requests using
the project_list action--which is the default action--and without
a searchtext parameter will be filtered by the searchtext value of the
first request. This is because the value of the $search_regexp global
(the value of which is based on the searchtext parameter) is currently
being persisted between requests.
Instead, clear $search_regexp before dispatching each request.
Signed-off-by: Charles McGarvey <chazmcgarvey@brokenzipper.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
fetch-options.txt: prevent a wildcard refspec from getting misformatted
When explaining the "--tags" option as an equivalent to giving an
explicit "refs/tags/*:refs/tags/*" refspec, the two asterisks were
misinterpreted by AsciiDoc as a request to typeset the string
segment between them in bold.
We could fix it in two ways. We can replace them with {asterisk}s
while keeping the string as body text, or we can mark it as a
literal string with backquotes around it.
Let's do the latter, as it is teaching the user an "exactly as
typed" alternative.
Noticed-by: Ramkumar Ramachandra <artagnon@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Merge tag 'post183-for-junio' of github.com/msysgit/git
Collected msysgit build patches for upstream
This set of patches collects a number of build fixes that have been
used on the msysgit port for a while and merging upstream should
simplify future maintenance.
* tag 'post183-for-junio' of http://github.com/msysgit/git:
Set the default help format to html for msys builds.
Ensure the resource file is rebuilt when the version changes.
Windows resource: handle dashes in the Git version gracefully
Provide a Windows version resource for the git executables.
msysgit: Add the --large-address-aware linker directive to the makefile.
Define NO_GETTEXT for Git for Windows
Makefile: Do not use OLD_ICONV on MINGW anymore
On Mac OS X, any application that is started from the Terminal will open
behind all running applications; as a work-around, manually bring ourselves
to the front. (Stolen from gitk, commit 76bf6ff93e.)
We do this as the very first thing, so that any message boxes that might pop
up during the rest of the startup sequence are actually seen by the user.
[PT: added catch and moved down to ensure Tk has been loaded]
Signed-off-by: Stefan Haller <stefan@haller-berlin.de> Signed-off-by: Pat Thoyts <patthoyts@users.sourceforge.net>
"git push $there HEAD:branch" did not resolve HEAD early enough, so
it was easy to flip it around while push is still going on and push
out a branch that the user did not originally intended when the
command was started.
* rr/push-head:
push: make push.default = current use resolved HEAD
push: fail early with detached HEAD and current
push: factor out the detached HEAD error message
The bash prompt code (in contrib/) displayed the name of the branch
being rebased when "rebase -i/-m/-p" modes are in use, but not the
plain vanilla "rebase".
* fc/show-branch-in-rebase-am:
prompt: fix for simple rebase
Special case "git clone" and use lighter-weight implementation to
check the completeness of the history behind refs.
* nd/clone-connectivity-shortcut:
clone: open a shortcut for connectivity check
index-pack: remove dead code (it should never happen)
fetch-pack: prepare updated shallow file before fetching the pack
clone: let the user know when check_everything_connected is run
t0005: skip signal death exit code test on Windows
The test case depends on that test-sigchain can commit suicide by a
call to raise(SIGTERM) in a way that run-command.c::wait_or_whine()
can detect as death through a signal. There are no POSIX signals on
Windows, and a sufficiently close emulation is not available in the
Microsoft C runtime (and probably not even possible).
The particular deficiency is that when a signal is raise()d whose
SIG_DFL action will cause process death (SIGTERM in this case), the
implementation of raise() in msvcrt just calls exit(3).
We could check for exit code 3 in addition to 143, but that would
miss the point of the test entirely. Hence, just skip it on Windows.
Signed-off-by: Johannes Sixt <j6t@kdbg.org> Acked-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>