Commit 43eb920 switched one of the sub-repository in this
test to matching to prepare for a world where the default
becomes "simple". However, the main repository needs a
similar change.
We did not notice any test failure when merged with b2ed944
(push: switch default from "matching" to "simple", 2013-01-04)
because t5531.6 is trying to provoke a failure of "git push"
due to a submodule check. When combined with b2ed944 the
push still fails, but for the wrong reason (because our
upstream setup does not exist, not because of the submodule).
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
diff test: reading a directory as a file need not error out
There is no guarantee that strbuf_read_file must error out for
directories. On some operating systems (e.g., Debian GNU/kFreeBSD
wheezy), reading a directory gives its raw content:
$ head -c5 < / | cat -A
^AM-|^_^@^L$
As a result, 'git diff -O/' succeeds instead of erroring out on
these systems, causing t4056.5 "orderfile is a directory" to fail.
On some weird OS it might even make sense to pass a directory to the
-O option and this is not a common user mistake that needs catching.
Remove the test.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
mv: let 'git mv file no-such-dir/' error out on Windows, too
The previous commit c57f628 (mv: let 'git mv file no-such-dir/' error out)
relies on that rename("file", "no-such-dir/") fails if the directory does not
exist (note the trailing slash). This does not work as expected on Windows:
This rename() call does not fail, but renames "file" to "no-such-dir" (not to
"no-such-dir/file"). Insert an explicit check for this case to force an error.
This changes the error message from
$ git mv file no-such-dir/
fatal: renaming 'file' failed: Not a directory
to
$ git mv file no-such-dir/
fatal: destination directory does not exist, source=file, destination=no-such-dir/
Signed-off-by: Johannes Sixt <j6t@kdbg.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git help $cmd" unnecessarily enumerated potential command names
from the filesystem, even when $cmd is known to be a built-in.
Ideas for further optimization, primarily by killing the use of
is_in_cmdlist(), were suggested in the discussion, but they can
come as follow-ups on top of this series.
* ss/builtin-cleanup:
builtin/help.c: speed up is_git_command() by checking for builtin commands first
builtin/help.c: call load_command_list() only when it is needed
git.c: consistently use the term "builtin" instead of "internal command"
Two-level configuration variable names in "branch.*" and "remote.*"
hierarchies whose variables are predominantly three-level where not
completed by hitting a <TAB> in bash and zsh completions.
"git merge-base --octopus" used to leave cleaning up suboptimal
result to the caller, but now it does the clean-up itself.
* bm/merge-base-octopus-dedup:
merge-base --octopus: reduce the result from get_octopus_merge_bases()
merge-base: separate "--independent" codepath into its own helper
Fetching 'frotz' branch with "git fetch", while having
'frotz/nitfol' remote-tracking branch from an earlier fetch, would
error out, primarily because the command has not been told to
remove anything on our side. In such a case, "git fetch --prune"
can be used to remove 'frotz/nitfol' to make room to fetch and
store 'frotz' remote-tracking branch.
* tm/fetch-prune:
fetch --prune: Run prune before fetching
fetch --prune: always print header url
Allow "git diff -O<file>" to be configured with a new configuration
variable.
* sb/diff-orderfile-config:
diff: add diff.orderfile configuration variable
diff: let "git diff -O" read orderfile from any file and fail properly
t4056: add new tests for "git diff -O"
When we figure out how many file descriptors to allocate for
keeping packfiles open, a system with non-working getrlimit() could
cause us to die(), but because we make this call only to get a
rough estimate of how many is available and we do not even attempt
to use up all file descriptors available ourselves, it is nicer to
fall back to a reasonable low value rather than dying.
* jh/rlimit-nofile-fallback:
get_max_fd_limit(): fall back to OPEN_MAX upon getrlimit/sysconf failure
read_sha1_file() that is the workhorse to read the contents given
an object name honoured object replacements, but there is no
corresponding mechanism to sha1_object_info() that is used to
obtain the metainfo (e.g. type & size) about the object, leading
callers to weird inconsistencies.
* cc/replace-object-info:
replace info: rename 'full' to 'long' and clarify in-code symbols
Documentation/git-replace: describe --format option
builtin/replace: unset read_replace_refs
t6050: add tests for listing with --format
builtin/replace: teach listing using short, medium or full formats
sha1_file: perform object replacement in sha1_object_info_extended()
t6050: show that git cat-file --batch fails with replace objects
sha1_object_info_extended(): add an "unsigned flags" parameter
sha1_file.c: add lookup_replace_object_extended() to pass flags
replace_object: don't check read_replace_refs twice
rename READ_SHA1_FILE_REPLACE flag to LOOKUP_REPLACE_OBJECT
Introduce "negative pathspec" magic, to allow "git log -- . ':!dir'" to
tell us "I am interested in everything but 'dir' directory".
* nd/negative-pathspec:
pathspec.c: support adding prefix magic to a pathspec with mnemonic magic
Support pathspec magic :(exclude) and its short form :!
glossary-content.txt: rephrase magic signature part
When no arguments are specified, $switch_to is empty so we end up
passing the empty string to "git merge-base --fork-point", which causes
an error. git-rebase carries on at this point, but in fact we have
failed to apply the fork-point operation.
It turns out that the test in t3400 that was meant to test this didn't
actually need the fork-point behaviour, so enhance it to make sure that
the fork-point is applied correctly. The modified test fails without
the change to git-rebase.sh in this patch.
Reported-by: Andreas Krey <a.krey@gmx.de> Signed-off-by: John Keeping <john@keeping.me.uk> Signed-off-by: Junio C Hamano <gitster@pobox.com>
shorten_unambiguous_ref(): introduce a new local variable
When filling the scanf_fmts array, use a separate variable to keep
track of the offset to avoid clobbering total_len (which we will need
in the next commit).
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 48d25ca adds a new commit "7" to the repo that the next test case
in commit 1609488 clones from. But the next test case does not expect
this commit. For these tests, it's the bottom that's important, not
the top. Fix the expected commit list.
While at it, fix the default http port number to 5537. Otherwise when
t5536 learns to test httpd, running test in parallel may fail.
References:
48d25ca fetch: add --update-shallow to accept... - 2013-12-05 1609488 smart-http: support shallow fetch/clone - 2013-12-05
Noticed-by: Jeff King <peff@peff.net> Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
rm: better document side effects when removing a submodule
The "Submodules" section of the "git rm" documentation mentions what will
happen when a submodule with a gitfile gets removed with newer git. But it
doesn't talk about what happens when the user changes between commits
before and after the removal, which does not remove the submodule from the
work tree like using the rm command did the first time.
Explain what happens and what the user has to do manually to fix that in
the new BUGS section. Also document this behavior in a new test.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
mv: better document side effects when moving a submodule
The "Submodules" section of the "git mv" documentation mentions what will
happen when a submodule with a gitfile gets moved with newer git. But it
doesn't talk about what happens when the user changes between commits
before and after the move, which does not update the work tree like using
the mv command did the first time.
Explain what happens and what the user has to do manually to fix that in
the new BUGS section. Also document this behavior in a new test.
Reported-by: George Papanikolaou <g3orge.app@gmail.com> Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
When trying to pop/apply a stash specified with an argument
containing IFS whitespace, git-stash will throw an error:
$ git stash pop 'stash@{two hours ago}'
Too many revisions specified: stash@{two hours ago}
This happens because word splitting is used to count non-option
arguments. Make use of rev-parse's --sq option to quote the arguments
for us to ensure a correct count. Add quotes where necessary.
Also add a test that verifies correct behaviour.
Helped-by: Thomas Rast <tr@thomasrast.ch> Signed-off-by: Øystein Walle <oystwa@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
sha1_name: don't resolve refs when core.warnambiguousrefs is false
When seeing a full 40-hex object name, get_sha1_basic()
unconditionally checks if the string can also be interpreted as a
refname, but the result will not be used unless warn_ambiguous_refs
is in effect.
Omitting this unnecessary ref resolution provides a substantial
performance improvement, especially when passing many hashes to a
command (like "git rev-list --stdin") and core.warnambiguousrefs is
set to false. The check incurs 6 stat()s for every hash supplied,
which can be costly over NFS.
Signed-off-by: Brodie Rao <brodie@sf.io> Acked-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Acked-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
On systems with lv configured as the preferred pager (i.e.,
DEFAULT_PAGER=lv at build time, or PAGER=lv exported in the
environment) git commands that use color show control codes instead of
color in the pager:
"less" avoids this problem because git uses the LESS environment
variable to pass the -R option ('output ANSI color escapes in raw
form') by default. Use the LV environment variable to pass 'lv' the
-c option ('allow ANSI escape sequences for text decoration / color')
to fix it for lv, too.
Noticed when the default value for color.ui flipped to 'auto' in
v1.8.4-rc0~36^2~1 (2013-06-10).
Reported-by: Olaf Meeuwissen <olaf.meeuwissen@avasys.jp> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-submodule.sh: 'checkout' is a valid update mode
'checkout' is documented as one of the valid values for the
'submodule.<name>.update' variable, and in a repository with the
variable set to 'checkout', "git submodule update" command does
update using the 'checkout' mode.
However, it has been an accident that the implementation works this
way; any unknown value would trigger the same codepath and update
using the 'checkout' mode.
Explicitly list 'checkout' as one of the known update modes, and
error out when an unknown update mode is used.
Teach the codepath that initializes the configuration variable from
an in-tree .gitmodules that 'checkout' is one of the valid values.
The code since ac1fbbda (submodule: do not copy unknown update mode
from .gitmodules, 2013-12-02) used to treat the value 'checkout' as
unknown and mapped it to 'none', which made little sense. With this
change, 'checkout' specified in .gitmodules will stay to be 'checkout'.
Signed-off-by: Francesco Pretto <ceztko@gmail.com> Signed-off-by: Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use asciidoc style 'article' instead of 'book' and change asciidoc
title level. This removes blank first page and superfluous "Part I"
page (there is no "Part II") in pdf output. Also pdf size is
decreased by this from 77 to 67 pages. In html output this removes
unnecessary sub-tocs and chapter numbering.
Signed-off-by: Thomas Ackermann <th.acker@arcor.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
builtin/help.c: speed up is_git_command() by checking for builtin commands first
Since 2dce956 is_git_command() is a bit slow as it does file I/O in
the call to list_commands_in_dir(). Avoid the file I/O by adding an
early check for the builtin commands.
Signed-off-by: Sebastian Schuberth <sschuberth@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
safe_create_leading_directories(): add new error value SCLD_VANISHED
Add a new possible error result that can be returned by
safe_create_leading_directories() and
safe_create_leading_directories_const(): SCLD_VANISHED. This value
indicates that a file or directory on the path existed at one point
(either it already existed or the function created it), but then it
disappeared. This probably indicates that another process deleted the
directory while we were working. If SCLD_VANISHED is returned, the
caller might want to retry the function call, as there is a chance
that a new attempt will succeed.
Why doesn't safe_create_leading_directories() do the retrying
internally? Because an empty directory isn't really ever safe until
it holds a file. So even if safe_create_leading_directories() were
absolutely sure that the directory existed before it returned, there
would be no guarantee that the directory still existed when the caller
tried to write something in it.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
cmd_init_db(): when creating directories, handle errors conservatively
safe_create_leading_directories_const() returns a non-zero value on
error. The old code at this calling site recognized a couple of
particular error values, and treated all other return values as
success. Instead, be more conservative: recognize the errors we are
interested in, but treat any other nonzero values as failures. This
is more robust in case somebody adds another possible return value
without telling us.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
safe_create_leading_directories(): introduce enum for return values
Instead of returning magic integer values (which a couple of callers
go to the trouble of distinguishing), return values from an enum. Add
a docstring.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
safe_create_leading_directories(): always restore slash at end of loop
Always restore the slash that we scribbled over at the end of the
loop, rather than also fixing it up at each premature exit from the
loop. This makes it harder to forget to do the cleanup as new paths
are added to the code.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
safe_create_leading_directories(): split on first of multiple slashes
If the input path has multiple slashes between path components (e.g.,
"foo//bar"), then the old code was breaking the path at the last
slash, not the first one. So in the above example, the second slash
was overwritten with NUL, resulting in the parent directory being
sought as "foo/".
When stat() is called on "foo/", it fails with ENOTDIR if "foo" exists
but is not a directory. This caused the wrong path to be taken in the
subsequent logic.
So instead, split path components at the first intercomponent slash
rather than the last one.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Keep track of the position of the slash character independently of
"pos", thereby making the purpose of each variable clearer and
working towards other upcoming changes.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
'pushdefault' doesn't come up. This is because "$cur" is matched with
"remote.*" and a list of remotes are completed. Add 'pushdefault' as a
candidate for completion too, using __gitcomp_nl_append ().
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
'autosetupmerge' and 'autosetuprebase' don't come up. This is because
"$cur" is matched with "branch.*" and a list of branches are
completed. Add 'autosetupmerge', 'autosetuprebase' as candidates for
completion too, using __gitcomp_nl_append ().
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The first candidate has the suffix ".", and the second/ third candidates
have the suffix " ". To facilitate completions of this kind, create a
variation of __gitcomp_nl () that appends to the existing list of
completion candidates, COMPREPLY.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
If zsh completion is being read from a location that is different from
system-wide default, it is likely that the user is trying to use a
custom version, perhaps closer to the bleeding edge, installed in her
own directory. We will more likely to find the matching bash completion
script in the same directory than in those system default places.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Documentation/gitmodules: Only 'update' and 'url' are required
Descriptions for all the settings fell under the initial "Each
submodule section also contains the following required keys:". The
example shows sections with just 'path' and 'url' entries, which are
indeed required, but we should still make the required/optional
distinction explicit to clarify that the rest of them are optional.
Signed-off-by: W. Trevor King <wking@tremily.us> Reviewed-by: Heiko Voigt <hvoigt@hvoigt.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 58babfff ("shallow.c: the 8 steps to select new commits for
.git/shallow", 05-12-2013) added a function to implement step 5 of
the quoted eight steps, namely 'remove_nonexistent_ours_in_pack()'.
This function implements an optional optimization step in the new
shallow commit selection algorithm. However, this function has no
callers. (The commented out call sites would need to change, in
order to provide information required by the function.)
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk> Acked-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit f2c681cf ("send-pack: support pushing from a shallow clone
via http", 05-12-2013) adds the 'advertise_shallow_grafts_buf'
function as an external symbol.
Noticed by sparse. ("'advertise_shallow_grafts_buf' was not declared.
Should it be static?")
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk> Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we have a remote-tracking branch named "frotz/nitfol" from a
previous fetch, and the upstream now has a branch named "frotz",
fetch would fail to remove "frotz/nitfol" with a "git fetch --prune"
from the upstream. git would inform the user to use "git remote
prune" to fix the problem.
Change the way "fetch --prune" works by moving the pruning operation
before the fetching operation. This way, instead of warning the user
of a conflict, it autmatically fixes it.
Signed-off-by: Tom Miller <jackerran@gmail.com> Tested-by: Thomas Rast <tr@thomasrast.ch> Signed-off-by: Junio C Hamano <gitster@pobox.com>
If "fetch --prune" is run with no new refs to fetch, but it has refs
to prune. Then, the header url is not printed as it would if there were
new refs to fetch.
Output before this patch:
$ git fetch --prune remote-with-no-new-refs
x [deleted] (none) -> origin/world
Output after this patch:
$ git fetch --prune remote-with-no-new-refs
From https://github.com/git/git
x [deleted] (none) -> origin/test
Signed-off-by: Tom Miller <jackerran@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 64a99eb4 git gc refuses to run without the --force option if
another gc process on the same repository is already running.
However, if the repository is shared and user A runs git gc on the
repository and while that gc is still running user B runs git gc on
the same repository the gc process run by user A will not be noticed
and the gc run by user B will go ahead and run.
The problem is that the kill(pid, 0) test fails with an EPERM error
since user B is not allowed to signal processes owned by user A
(unless user B is root).
Update the test to recognize an EPERM error as meaning the process
exists and another gc should not be run (unless --force is given).
Signed-off-by: Kyle J. McKay <mackyle@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Having a simulated "known breakage" test means that the test
suite will always tell us there is a bug to be fixed, even
though it is only simulated.
The right way to test this is in a sub-test, that can also
check that we provide the correct exit status and output.
Fortunately, we already have such a test (added much later
by 5ebf89e).
We could arguably get rid of the simulated success test
immediately above, as well, as it is also redundant with the
tests added in 5ebf89e. However, it does not have the
annoying behavior of the "known breakage" test. It may also
be easier to debug if the test suite is truly broken, since
it is not a test-within-a-test, as the later tests are.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 517cd55 set HARNESS_ACTIVE unconditionally in
sub-tests, because that value affects the output of
"--verbose". t0000 needs stable output from its sub-tests,
and we may or may not be running under a TAP harness.
That commit made the decision to always set the variable,
since it has another useful side effect, which is
suppressing writes to t/test-results by the sub-tests (which
would just pollute the real results).
Since the last commit, though, the sub-tests have their own
test-results directories, so this is no longer an issue. We
can now update a few comments that are no longer accurate
nor necessary.
We can also revisit the choice of HARNESS_ACTIVE. Since we
must choose one value for stability, it's probably saner to
have it off. This means that future patches could test
things like the test-results writing, or the "--quiet"
option, which is currently ignored when run under a harness.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
These scratch areas for sub-tests should be under the t0000 trash
directory, but because TEST_OUTPUT_DIRECTORY defaults to
TEST_DIRECTORY, which is exported to help sub-tests find
test-lib.sh, the sub-test trash directories are created under the
toplevel t/ directory instead. Because some of the sub-tests
simulate failures, their trash directories are kept around.
Fix it by explicitly setting TEST_OUTPUT_DIRECTORY appropriately for
sub-tests.
An alternative fix would be to pass the --root parameter that only
specifies where to put the trash directories, which would also work.
However, using TEST_OUTPUT_DIRECTORY is more futureproof in case
tests want to write more output in addition to the test-results/
(which are already suppressed in sub-tests using the HARNESS_ACTIVE
setting) and trash directories.
This fixes a regression introduced by 38b074d (t/test-lib.sh: fix
TRASH_DIRECTORY handling, 2013-04-14). Before that commit, the
TEST_OUTPUT_DIRECTORY setting was not respected consistently so most
tests did their work in a "trash" subdirectory of the current
directory instead of the output dir.
Signed-off-by: Jeff King <peff@peff.net> Clarified-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
use distinct username/password for http auth tests
The httpd server we set up to test git's http client code
knows about a single account, in which both the username and
password are "user@host" (the unusual use of the "@" here is
to verify that we handle the character correctly when URL
escaped).
This means that we may miss a certain class of errors in
which the username and password are mixed up internally by
git. We can make our tests more robust by having distinct
values for the username and password.
In addition to tweaking the server passwd file and the
client URL, we must teach the "askpass" harness to accept
multiple values. As a bonus, this makes the setup of some
tests more obvious; when we are expecting git to ask
only about the password, we can seed the username askpass
response with a bogus value.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
That commit taught do_askpass to hand ownership of our
buffer back to the caller rather than simply return a
pointer into our internal strbuf. What it failed to notice,
though, was that our internal strbuf is static, because we
are trying to emulate the getpass() interface.
By handing off ownership, we created a memory leak that
cannot be solved. Sometimes git_prompt returns a static
buffer from getpass() (or our smarter git_terminal_prompt
wrapper), and sometimes it returns an allocated string from
do_askpass.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add an entry into the table of supported OSes. Do not set _XOPEN_SOURCE
(contrary to OpenBSD) because that disables the u_short and u_long
typedefs, which are used unconditionally in various other header files.
Signed-off-by: Benny Siegert <bsiegert@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
replace info: rename 'full' to 'long' and clarify in-code symbols
Enum names SHORT/MEDIUM/FULL were too broad to be descriptive. And
they clashed with built-in symbols on platforms like Windows.
Clarify by giving them REPLACE_FORMAT_ prefix.
Rename 'full' format in "git replace --format=<name>" to 'long', to
match others (i.e. 'short' and 'medium').
Signed-off-by: Christian Couder <chriscool@tuxfamily.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
merge-base --octopus: reduce the result from get_octopus_merge_bases()
Scripts that use "merge-base --octopus" could do the reducing
themselves, but most of them are expected to want to get the reduced
results without having to do any work themselves.
Tests are taken from a message by Василий Макаров
<einmalfel@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
---
We might want to vet the existing callers of the underlying
get_octopus_merge_bases() and find out if _all_ of them are doing
anything extra (like deduping) because the machinery can return
duplicate results. And if that is the case, then we may want to
move the dedupling down the callchain instead of having it here.
merge-base: separate "--independent" codepath into its own helper
It piggybacks on an unrelated handle_octopus() function only because
there are some similarities between the way they need to preprocess
their input and output their result. There is nothing similar in
the true logic between these two operations.
Support for grafts predates Git's strbuf, and hence it is understandable
that there was a hard-coded line length limit of 1023 characters (which
was chosen a bit awkwardly, given that it is *exactly* one byte short of
aligning with the 41 bytes occupied by a commit name and the following
space or new-line character).
While regular commit histories hardly win comprehensibility in general
if they merge more than twenty-two branches in one go, it is not Git's
business to limit grafts in such a way.
In this particular developer's case, the use case that requires
substantially longer graft lines to be supported is the visualization of
the commits' order implied by their changes: commits are considered to
have an implicit relationship iff exchanging them in an interactive
rebase would result in merge conflicts.
Thusly implied branches tend to be very shallow in general, and the
resulting thicket of implied branches is usually very wide; It is
actually quite common that *most* of the commits in a topic branch have
not even one implied parent, so that a final merge commit has about as
many implied parents as there are commits in said branch.
[jc: squashed in tests by Jonathan]
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Reviewed-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* fc/remote-helper-fixes:
remote-hg: test 'shared_path' in a moved clone
remote-hg: add tests for special filenames
remote-hg: fix 'shared path' path
remote-helpers: add extra safety checks
remote-hg: avoid buggy strftime()
Two packfiles that contain the same set of objects have
traditionally been named identically, but that made repacking a
repository that is already fully packed without any cruft with a
different packing parameter cumbersome. Update the convention to
name the packfile after the bytestream representation of the data,
not after the set of objects in it.
* jk/name-pack-after-byte-representation:
pack-objects doc: treat output filename as opaque
pack-objects: name pack files after trailer hash
sha1write: make buffer const-correct
"git diff ../else/where/A ../else/where/B" when ../else/where is
clearly outside the repository, and "git diff --no-index A B", do
not have to look at the index at all, but we used to read the index
unconditionally.
* tg/diff-no-index-refactor:
diff: avoid some nesting
diff: add test for --no-index executed outside repo
diff: don't read index when --no-index is given
diff: move no-index detection to builtin/diff.c
Show the total number of paths and the number of paths shown so far
when "git difftool" prompts to launch an external diff tool, which
would give users some sense of progress.
* zk/difftool-counts:
diff.c: fix some recent whitespace style violations
difftool: display the number of files in the diff queue in the prompt
Make "git push origin master" update the same ref that would be
updated by our 'master' when "git push origin" (no refspecs) is run
while the 'master' branch is checked out, which makes "git push"
more symmetric to "git fetch" and more usable for the triangular
workflow.
* jc/push-refmap:
push: also use "upstream" mapping when pushing a single ref
push: use remote.$name.push as a refmap
builtin/push.c: use strbuf instead of manual allocation
Subversion serf backend in versions 1.8.5 and below has a bug(*) that the
function creating the descriptor of a file change -- add_file() --
doesn't make a copy of its third argument when storing it on the
returned descriptor. As a result, by the time this field is used (in
transactions of file copying or renaming) it may well be released, and
the memory reused.
One of its possible manifestations is the svn assertion triggering on an
invalid path, with a message
This patch works around this bug, by storing the value to be passed as
the third argument to add_file() in a local variable with the same scope
as the file change descriptor, making sure their lifetime is the same.
* [ew: fixed in Subversion r1553376 as noted by Jonathan Nieder]
Cc: Benjamin Pabst <benjamin.pabst85@gmail.com> Signed-off-by: Eric Wong <normalperson@yhbt.net> Reviewed-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Roman Kagan <rkagan@mail.ru>
It can be useful for debugging or analysis to see which
objects are stored as delta bases on top of others. This
information is available by running `git verify-pack`, but
that is extremely expensive (and is harder than necessary to
parse).
Instead, let's make it available as a cat-file query format,
which makes it fast and simple to get the bases for a subset
of the objects.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
sha1_object_info_extended: provide delta base sha1s
A caller of sha1_object_info_extended technically has enough
information to determine the base sha1 from the results of
the call. It knows the pack, offset, and delta type of the
object, which is sufficient to find the base.
However, the functions to do so are not publicly available,
and the code itself is intimate enough with the pack details
that it should be abstracted away. We could add a public
helper to allow callers to query the delta base separately,
but it is simpler and slightly more efficient to optionally
grab it along with the rest of the object_info data.
For cases where the object is not stored as a delta, we
write the null sha1 into the query field. A careful caller
could check "oi.whence == OI_PACKED && oi.u.packed.is_delta"
before looking at the base sha1, but using the null sha1
provides a simple alternative (and gives a better sanity
check for a non-careful caller than simply returning random
bytes).
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The sha1write function returns an int, but it will always be
"0". The failure-prone parts of the function happen in the
"flush" callback, which cannot pass an error back to us. So
we just end up calling die() during the flush.
Let's just drop the return value altogether, as it only
confuses callers into thinking that it might be useful.
Only one call site actually checked the return value. We can
drop that check, since it just led to a die() anyway.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
add: don't complain when adding empty project root
This behavior was added in 07d7bed (add: don't complain when adding
empty project root - 2009-04-28) then broken by 84b8b5d (remove
match_pathspec() in favor of match_pathspec_depth() -
2013-07-14). Reinstate it.
Noticed-by: Thomas Ferris Nicolaisen <tfnico@gmail.com> Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Reviewed-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since e71d1378 (remote-hg: fix 'shared path' path, 2013-12-07),
Mercurial 'shared_path' file is correctly updated whenever a clone is
moved. Make sure it keeps working, especially as this is depending on a
private Mercurial file.
Signed-off-by: Antoine Pelisse <apelisse@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>