cvsserver: Respond to the 'editors' and 'watchers' commands
These commands list users editing and watching locked files. This trivial
implementation always returns an empty response, since git-cvsserver does not
implement file locking.
Without this, TkCVS hangs at startup, waiting forever for a response.
Signed-off-by: Damien Diederen <dash@foobox.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
Update draft release notes for 1.5.4.5
Documentation: clarify use of .git{ignore,attributes} versus .git/info/*
t/t3800-mktag.sh: use test_must_fail rather than '!'
Documentation: clarify use of .git{ignore,attributes} versus .git/info/*
gitignore patterns can be read from three different
files, while gitattributes can come from two files. Let's
provide some hints to the user about the differences and how
they are typically used.
Suggested by Toby Corkindale, but gratuitously reworded by Jeff King.
Signed-off-by: Toby Corkindale <toby.corkindale@rea-group.com> Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
test_must_fail: 129 is a valid error code from usage()
When a git command is run under test_must_fail to make sure that
the argument parser catches bogus command line, it exits with 129.
We need to catch it as a valid "graceful error exit".
imap-send: properly error out if imap.host is not set in config
If no imap host is specified in the git config, git imap-send used
to try to lookup a null pointer through gethostbyname(), causing a
segfault. Since setting the imap.host variable is mandatory,
imap-send now properly fails with an explanatory error message.
The problem has been reported by picca through
http://bugs.debian.org/472632
Signed-off-by: Gerrit Pape <pape@smarden.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Always set *nongit_ok in setup_git_directory_gently()
setup_git_directory_gently() only modified the value of its *nongit_ok
argument if we were not in a git repository. Now it will always set it
to 0 when we are inside a repository.
Also remove now unnecessary initializations in the callers of this
function.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/maint-fetch-regression-1.5.4:
git-fetch test: test tracking fetch results, not just FETCH_HEAD
Fix branches file configuration
Tighten refspec processing
Fix the wrong output of `git-show v1.3.0~155^2~4` in documentation.
git-fetch test: test tracking fetch results, not just FETCH_HEAD
We really should have done this long time ago. Existing t5515 test
was written for the specific purpose of catching regression to the
contents of generated FETCH_HEAD file, but it also is a good place
to make sure various fetch configurations do fetch what they intend
to fetch (and nothing else).
Fetched remote branch from .git/branches/foo should fetch into
refs/heads/foo. Also when partial URL is given, the fetched head should
always be remote HEAD, and the result should not be stored anywhere.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
This changes the pattern matching code to not store the required final
/ before the *, and then to require each side to be a valid ref (or
empty). In particular, any refspec that looks like it should be a
pattern but doesn't quite meet the requirements will be found to be
invalid as a fallback non-pattern.
This was cherry picked from commit ef00d15 (Tighten refspec processing,
2008-03-17), and two fix-up commits 46220ca (remote.c: Fix overtight
refspec validation, 2008-03-20) and 7d19da4 (refspec: allow colon-less
wildcard "refs/category/*", 2008-03-25) squashed in.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix the wrong output of `git-show v1.3.0~155^2~4` in documentation.
Texts between ~ and ~ will be subscripted during the asciidoc translation.
Signed-off-by: Guanqun Lu <Guanqun.Lu@Gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
(cherry picked from commit 0c829391cfcdc57172765322575804a7ad5f3116)
"git push --tags elsewhere" is implemented in terms of wildcarded refspec
"refs/tags/*" these days, and the user wants to push the tags under the
same name to the other branch. This resurrects the support for it.
init: show "Reinit" message even in an (existing) empty repository
Earlier, git-init tested for a valid HEAD ref, but if the repository
was empty, there was none. Instead, test for the existence of
the file $GIT_DIR/HEAD.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Documentation/git-checkout: Update summary to reflect current abilities
For a while now, git-checkout has been more powerful than the man-page
summary would suggest (the main text does describe the new features),
so update the summary to hopefully better reflect the current
functionality. Also update the glossary description of the word checkout.
Signed-off-by: Julian Phillips <julian@quantumfyre.co.uk> Signed-off-by: Junio C Hamano <gitster@pobox.com>
builtin-remote: Fix missing newline at end of listing of pushed branches
Without this the output of 'git remote show' does not end with a new-line:
bash> git remote show repo
* remote repo
URL: repo.or.cz:/srv/git/kdbg.git
Tracked remote branches
maint master mob
Local branch pushed with 'git push'
+master:masterbash>
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at> Acked-by: Johannes Schindelin <Johannes.Schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
RelNotes: mention checkout/branch's --track option, too
checkout and branch recently learnt to track local branches when
branch.autosetupmerge = always, but they _also_ learnt to do that when
asked explicitely with the option "--track".
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
gc --auto: raise default auto pack limit from 20 to 50
Recent discussion on the list, with the improvement f7c22cc (always start
looking up objects in the last used pack first, 2007-05-30) brought in,
reached the concensus that the current default 20 is too low.
Reference: http://thread.gmane.org/gmane.comp.version-control.git/77586 Signed-off-by: Junio C Hamano <gitster@pobox.com>
Merge branch 'git-p4' of git://repo.or.cz/git/git-p4
* 'git-p4' of git://repo.or.cz/git/git-p4:
git-p4: Use P4EDITOR environment variable when set
git-p4: Unset P4DIFF environment variable when using 'p4 -du diff'
git-p4: Optimize the fetching of data from perforce.
We tightened the refspec validation code in an earlier commit ef00d15
(Tighten refspec processing, 2008-03-17) per my suggestion, but the
suggestion was misguided to begin with and it broke this usage:
$ git push origin HEAD~12:master
The syntax of push refspecs and fetch refspecs are similar in that they
are both colon separated LHS and RHS (possibly prefixed with a + to
force), but the similarity ends there. For example, LHS in a push refspec
can be anything that evaluates to a valid object name at runtime (except
when colon and RHS is missing, or it is a glob), while it must be a
valid-looking refname in a fetch refspec. To validate them correctly, the
caller needs to be able to say which kind of refspecs they are. It is
unreasonable to keep a single interface that cannot tell which kind it is
dealing with, and ask it to behave sensibly.
This commit separates the parsing of the two into different functions, and
clarifies the code to implement the parsing proper (i.e. splitting into
two parts, making sure both sides are wildcard or neither side is).
This happens to also allow pushing a commit named with the esoteric "look
for that string" syntax:
fast-import: Document the effect of "merge" with no "from" in a commit
The fast-import documentation currently does not document the behaviour
of "merge" when there is no "from" in a commit. This patch adds a
description of what happens: the commit is created with a parent, but
no files. This behaviour is equivalent to "from" followed by
"filedeleteall".
Signed-off-by: Eyvind Bernhardsen <eyvind-git@orakel.ntnu.no> Acked-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Don't try and percent-escape existing percent escapes in git-svn URIs
git-svn project names are percent-escaped ever since f5530b8
(git-svn: support for funky branch and project names over HTTP(S),
2007-11-11).
Unfortunately this breaks the scenario where the user hands git-svn an
already-escaped URI. Fix the regexp to skip over what looks like
existing percent escapes, and test this scenario.
Signed-off-by: Kevin Ballard <kevin@sb.org> Acked-by: Eric Wong <normalperson@yhbt.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
For symbolic refs, a sane notion of being "stale" is that the ref
they point to no longer exists. Since this is checked already,
"remote show" does not need to show them at all.
Incidentally, this fixes the issue that "HEAD" was shown as a
stale ref by "remote show" in a freshly cloned repository.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Document the sendemail.smtpserverport config variable
Add sendemail.smtpserverport to the Configuration section
of the git-send-email manpage. It should probably be
referenced in the --smtp-server-port option as well.
Signed-off-by: Kevin Ballard <kevin@sb.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
builtin-gc.c: allow disabling all auto-gc'ing by assigning 0 to gc.auto
The gc.auto configuration variable is somewhat ambiguous now that there
is also a gc.autopacklimit setting. Some users may assume that it controls
all auto-gc'ing. Also, now users must set two configuration variables to
zero when they want to disable autopacking. Since it is unlikely that users
will want to autopack based on some threshold of pack files when they have
disabled autopacking based on the number of loose objects, be nice and allow
a setting of zero for gc.auto to disable all autopacking.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Before the second fetch-pack connection in the same process, unmark
all of the objects marked in the first connection, in order that we'll
list them as things we have instead of thinking we've already
mentioned them.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make revision limiting more robust against occasional bad commit dates
The revision limiter uses the commit date to decide when it has seen
enough commits to finalize the revision list, but that can get confused
if there are incorrect dates far in the past on some commits.
This makes the logic a bit more robust by
- we always walk an extra SLOP commits from the source list even if we
decide that the source list is probably all done (unless the source is
entirely empty, of course, because then we really can't do anything at
all)
- we keep track of the date of the last commit we added to the
destination list (this will *generally* be the oldest entry we've seen
so far)
- we compare that with the youngest entry (the first one) of the source
list, and if the destination is older than the source, we know we want
to look at the source.
which causes occasional date mishaps to be handled cleanly.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git-config name = value" doesn't do anything most of the time. The
test meant "git-config name value", but that leaves the configuration
such that later tests will be confused, so move it to the end.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
This changes the pattern matching code to not store the required final
/ before the *, and then to require each side to be a valid ref (or
empty). In particular, any refspec that looks like it should be a
pattern but doesn't quite meet the requirements will be found to be
invalid as a fallback non-pattern.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix possible Solaris problem in 'checkout_entry()'
Currently when checking out an entry "path", we try to unlink(2) it first
(because there could be stale file), and if there is a directory there,
try to deal with it (typically we run recursive rmdir). We ignore the
error return from this unlink because there may not even be any file
there.
However if you are root on Solaris, you can unlink(2) a directory
successfully and corrupt your filesystem.
This moves the code around and check the directory first, and then
unlink(2). Also we check the error code from it.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
When your test creates an unwritable directory that test framework cannot
clean out by "rm -fr trash", later tests cannot start in a fresh state
they expect to. Detect this and error out early.
When a merge result creates a new file, and when our side already has a
file in the path, taking the merge result may clobber the untracked file.
However, the logic to detect this situation was totally the wrong way. We
should complain when the file exists, not when the file does not exist.
In commit 34110cd4e394e3f92c01a4709689b384c34645d8 ("Make 'unpack_trees()'
have a separate source and destination index") I introduced a really
stupid bug in that it would always add merged entries with the CE_UPDATE
flag set. That caused us to always re-write the file, even when it was
already up-to-date in the source index.
Not only is that really stupid from a performance angle, but more
importantly it's actively wrong: if we have dirty state in the tree when
we merge, overwriting it with the result of the merge will incorrectly
overwrite that dirty state.
This trivially fixes the problem - simply don't set the CE_UPDATE flag
when the merge result matches the old state.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
fast-import: Allow "reset" to delete a new branch without error
Creating a branch in fast-import and then resetting it without making
any further commits to it currently causes an error message at the
end of the import.
This error is triggered by cvs2svn's git backend, which uses a
temporary fixup branch when it creates tags, because the fixup branch
is reset after each tag.
This patch prevents the error, allowing "reset" to be used to delete
temporary branches.
Signed-off-by: Eyvind Bernhardsen <eyvind-git@orakel.ntnu.no> Acked-by: Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
When rebasing changes that contain issues that the pre-commit hook flags
as problematic, the rebase cannot be continued. However, rebase is about
transplanting commits that are already made with as little distortion as
possible, and pre-commit check should not interfere.
Earlier, c5b09fe (Avoid update hook during git-rebase --interactive,
2007-12-19) fixed "rebase -i", but "rebase -m" shared the same issue.
* 'master' of git://repo.or.cz/git-gui:
git-gui: Improve directions regarding POT update in po/README
git-gui: Update Japanese translation
git-gui: Adjusted Japanese translation to updated POT
git-gui: Update Japanese translation
git-gui: Don't translate the special Apple menu
git-gui: Updated Hungarian translation (e5fba18)
git-gui: update russian translation
git-gui: remove spurious "fuzzy" attributes in po/it.po
git-gui: updated Swedish translation
git-gui: Regenerated po template and merged translations with it
Update Hungarian translation. 100% completed.
git-gui: update Italian translation
git-gui: Improve directions regarding POT update in po/README
Keeping POT up to date relative to the software is absolutely
necessary. What is unwarranted is updating language files at
the same time by running msgmerge without checking if there is
any outstanding translation work first. If we assume that the
translators do not have access to msgmerge, that is a good service
to them (the less they have to do, the better), but otherwise,
it is better to be leave po/${language}.po files alone.
Signed-off-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
* jk/portable:
t6000lib: re-fix tr portability
t7505: use SHELL_PATH in hook
t9112: add missing #!/bin/sh header
filter-branch: use $SHELL_PATH instead of 'sh'
filter-branch: don't use xargs -0
add NO_EXTERNAL_GREP build option
t6000lib: tr portability fix
t4020: don't use grep -a
add test_cmp function for test scripts
remove use of "tail -n 1" and "tail -1"
grep portability fix: don't use "-e" or "-q"
more tr portability test script fixes
t0050: perl portability fix
tr portability fixes
format-patch: generate MIME header as needed even when there is format.header
Earlier, the callchain from pretty_print_commit() down to pp_title_line()
had an unwarranted assumption that the presense of "after_subject"
parameter, means the caller has already output MIME headers for
attachments. The parameter's primary purpose is to give extra header
lines the caller wants to place after pp_title_line() generates the
"Subject: " line.
This assumption does not hold when the user used the format.header
configuration variable to pass extra headers, and caused a message with
non-ASCII character to lack proper MIME headers (e.g. 8-bit CTE header).
The earlier logic also failed to suppress duplicated MIME headers when
"format-patch -s --attach" is asked for and the signer's name demanded
8-bit clean transport.
This patch fixes the logic by introducing a separate need_8bit_cte
parameter passed down the callchain. This can have one of these values:
-1 : we've already done MIME crap and we do not want to add extra header
to say this is 8bit in pp_title_line();
0 : we haven't done MIME and we have not seen anything that is 8bit yet;
1 : we haven't done MIME and we have seen something that is 8bit;
pp_title_line() must add MIME header.
It adds two tests by Jeff King who independently diagnosed this issue.
* maint:
Make man page building quiet when DOCBOOK_XSL_172 is defined
git-new-workdir: Share SVN meta data between work dirs and the repository
rev-parse: fix meaning of rev~ vs rev~0.
git-svn: don't blindly append '*' to branch/tags config
git-new-workdir: Share SVN meta data between work dirs and the repository
Multiple work dirs with git svn caused each work dir to have its own
stale copy of the SVN meta data in .git/svn
git svn rebase updates commits with git-svn-id: in the repository and
stores the SVN meta data information only in that work dir. Attempting to
git svn rebase in other work dirs for the same branch would fail because
the last revision fetched according to the git-svn-id is greater than the
revision in the SVN meta data for that work directory.
Signed-off-by: Bernt Hansen <bernt@norang.ca> Acked-by: Eric Wong <normalperson@yhbt.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
On Sat, 15 Mar 2008, SZEDER G?bor wrote:
>
> The testcase usually fails during the first 25 run, but sometimes it
> runs more than 100 times before failing.
Damn, this series has had more subtle issues than I ever expected.
'git stash' creates its saved working tree object with:
# state of the working tree
w_tree=$( (
rm -f "$TMP-index" &&
cp -p ${GIT_INDEX_FILE-"$GIT_DIR/index"} "$TMP-index" &&
GIT_INDEX_FILE="$TMP-index" &&
export GIT_INDEX_FILE &&
git read-tree -m $i_tree &&
git add -u &&
git write-tree &&
rm -f "$TMP-index"
) ) ||
die "Cannot save the current worktree state"
which creates a new index file with the updates, and writes the tree from
that.
We have this logic where we compare the timestamp of the index with the
timestamp of the files and we then write them out "smudged" if they are
the same, and it basically depends on the fact that the date on the index
file is compared with the date encoded in the stat information itself.
And what is going on is:
- we create a new index file with that "cp". We are careful to preserve
the timestamps by using "-p", so this one should be all ok.
- then we *update* that index by resetting it to the tree with git
read-tree, but now we do *not* preserve the timestamp on this new copy
any more, even though we copy over all the timestamps on the files that
are indexed from the stat information!
Now, we always had that problem when re-writing the index, but we had this
clever workaround in the writing part: if the source had racily clean
entries, then when we wrote those out (and thus can't depend on the index
fiel timestamp showing that they are racily clean any more!), we would
smudge them when writing.
IOW, we handle this issue by having write_index() do this:
for (i = 0; i < entries; i++) {
...
if (is_racy_timestamp(istate, ce))
ce_smudge_racily_clean_entry(ce);
..
when writing out entries. And that all took care of it, because now when
we wrote the new index, we'd change the timestamp on the index, yes, but
we'd smudge the entries we wrote out, so now the resulting index would
still show that file as not-up-to-date any more.
But with commit 34110cd4e394e3f92c01a4709689b384c34645d8 ("Make
'unpack_trees()' have a separate source and destination index"), this
logic no longer triggers, because we now write out the "result" index, and
that one never got its timestamp updated from the source index, so it had
lost all that "is_racy_timestamp()" information!
This trivial patch fixes it. It looks trivial, and it's a simple fix, but
boy did it take me way too much thinking and explaining to myself to
explain why there was a problem in the first place!
The trivial fix is to just copy the index timestamp from the source index
into the result index. But we only do this if we *have* a source index, of
course, and if we will even bother to use the result.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Peter Karlsson pointed out there is no value in translating the
string "Apple", as this is used as the dummy label for the Apple
menu on Mac OS X systems.
The Apple menu is actually not the menu with the Apple corporate
logo, but the menu next to it, which shows the name of the
application and is typically called the application menu. Most users
of git-gui see this menu titled as "Git Gui". The actual label of
this menu comes from our Info.plist file and cannot be specified
by any other means. Translating this string in the Tcl PO files
is not necessary.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
I think it would make more sense for rev~ to have the same guarantees that
rev^ has, namely to always return a commit. I would also suggest that not
giving a number would have the same effect of defaulting to 1, not 0.
Right now it's a bit illogical, but at least it's an _undocumented_
illogical behaviour.
This patch makes '^' and '~' act the same for the default count (i.e. both
default to 1), and also have the same behaviour for a count of zero.
Thanks to martin f krafft for the bug report:
> My git-svn target configuration is
>
> [svn-remote "svn"]
> url = svn://svn.berlios.de/docutils
> fetch = trunk/docutils:refs/remotes/trunk
> branches = branches/*/docutils:refs/remotes/*
> tags = tags/*/docutils:refs/remotes/tags/*
>
> Unfortunately, when I run
>
> git-svn init -T trunk/docutils -t 'tags/*/docutils'
> -b 'branches/*/docutils'
>
> then I get (note the two asterisks on the left hand side):
>
> branches = branches/*/docutils/*:refs/remotes/*
> tags = tags/*/docutils/*:refs/remotes/tags/*
>
> I took a brief stab at the code but I can't even figure out where
> the /* is appended, so I defer to you.
>
> It should be trivial to keep git-svn from appending /* if the left
> side already contains an asterisk.
Signed-off-by: Eric Wong <normalperson@yhbt.net> Tested-by: martin f krafft <madduck@madduck.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* git://git.kernel.org/pub/scm/gitk/gitk:
gitk: initial Italian translation
gitk: Default to using po2msg.sh if msgfmt doesn't grok --tcl, -l and -d
gitk: Avoid Tcl error when switching views
[PATCH] gitk: Don't show local changes when we there is no work tree
[PATCH] gitk: Add horizontal scrollbar to the diff view
[PATCH] gitk: make autoselect optional
[PATCH] gitk: Mark another string for translation
[PATCH] Add an --argscmd flag to get the list of refs to show
gitk: Only restore window size from ~/.gitk, not position
gitk: Default to using po2msg.sh if msgfmt doesn't grok --tcl, -l and -d
This is a similar change to that submitted by Junio C Hamano for
git-gui. It tests whether the msgfmt command can be run successfully
with --tcl, -l and -d, and if not, falls back to using po/po2msg.sh.
web--browse: use custom commands defined at config time
Currently "git web--browse" is restricted to a set of commands defined
in the script. You can subvert the "browser.<tool>.path" to force "git
web--browse" to use a different command, but if you have a command
whose invocation syntax does not match one of the current tools then
you would have to write a wrapper script for it.
This patch adds a git config variable "browser.<tool>.cmd" which
allows a more flexible browser choice.
If you run "git web--browse" with -t/--tool, -b/--browser or the
"web.browser" config variable set to an unrecognized tool then "git
web--browse" will query the "browser.<tool>.cmd" config variable. If
this variable exists, then "git web--browse" will treat the specified
tool as a custom command and will use a shell eval to run the command
with the URLs added as extra parameters.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
merge-file: handle empty files gracefully
merge-recursive: handle file mode changes
Minor wording changes in the keyboard descriptions in git-add --interactive.
git fetch: Take '-n' to mean '--no-tags'
quiltimport: fix misquoting of parsed -p<num> parameter
git-quiltimport: better parser to grok "enhanced" series files.
read-tree() and unpack_trees(): use consistent limit
read-tree -m can read up to MAX_TREES, which was arbitrarily set to 8 since
August 2007 (4 is needed to deal with 2 merge-base case).
However, the updated unpack_trees() code had an advertised limit of 4
(which it enforced). In reality the code was prepared to take only 3
trees and giving 4 caused it to stomp on its stack. Rename the MAX_TREES
constant to MAX_UNPACK_TREES, move it to the unpack-trees.h common header
file, and use it from both places to avoid future confusion.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Earlier, it would error out while trying to read and/or writing them.
Now, calling merge-file with empty files is neither interesting nor
useful, but it is a bug that needed fixing.
Noticed by Clemens Buchacher.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
File mode changes should be handled similarly to changes of content.
That is, if the file mode changed in only one branch, keep the changed
version, and if both branch changed to different mode, mark it as a
conflict.
Signed-off-by: Clemens Buchacher <drizzd@aon.at> Signed-off-by: Junio C Hamano <gitster@pobox.com>
pack-objects: proper pack time stamping with --max-pack-size
Runtime pack access is done in the pack file mtime order since recent
packs are more likely to contain frequently used objects than old packs.
However the --max-pack-size option can produce multiple packs with mtime
in the reversed order as newer objects are always written first.
Let's modify mtime of later pack files (when any) so they appear older
than preceding ones when a repack creates multiple packs.