When "git bundle" aborts due to an empty commit ranges
(i.e. resulting in an empty pack), it left a file descriptor to an
lockfile open, which resulted in leftover lockfile on Windows where
you cannot remove a file with an open file descriptor. This has
been corrected.
* jk/close-duped-fd-before-unlock-for-bundle:
bundle: dup() output descriptor closer to point-of-use
The recently merged "rebase in C" has an escape hatch to use the
scripted version when necessary, but it hasn't been documented,
which has been corrected.
* ab/rebase-in-c-escape-hatch:
tests: add a special setup where rebase.useBuiltin is off
rebase doc: document rebase.useBuiltin
The way "git rebase" parses and forwards the command line options
meant for underlying "git am" has been revamped, which fixed for
options with parameters that were not passed correctly.
* js/rebase-am-options:
rebase: validate -C<n> and --whitespace=<mode> parameters early
rebase: really just passthru the `git am` options
"git ls-remote --sort=<thing>" can feed an object that is not yet
available into the comparison machinery and segfault, which has
been corrected to check such a request upfront and reject it.
* sg/ref-filter-wo-repository:
ref-filter: don't look for objects when outside of a repository
Bugfix for the recently graduated "git rebase --rebase-merges".
* js/rebase-r-and-merge-head:
status: rebase and merge can be in progress at the same time
built-in rebase --skip/--abort: clean up stale .git/<name> files
rebase -i: include MERGE_HEAD into files to clean up
rebase -r: do not write MERGE_HEAD unless needed
rebase -r: demonstrate bug with conflicting merges
When editing a patch in a "git add -i" session, a hunk could be
made to no-op. The "git apply" program used to reject a patch with
such a no-op hunk to catch user mistakes, but it is now updated to
explicitly allow a no-op hunk in an edited patch.
"git rebase --autostash" did not correctly re-attach the HEAD at times.
* js/rebase-autostash-detach-fix:
built-in rebase --autostash: leave the current branch alone if possible
built-in rebase: demonstrate regression with --autostash
The "--no-patch" option, which can be used to get a high-level
overview without the actual line-by-line patch difference shown, of
the "range-diff" command was earlier broken, which has been
corrected.
* ab/range-diff-no-patch:
range-diff: make diff option behavior (e.g. --stat) consistent
range-diff: fix regression in passing along diff options
range-diff doc: add a section about output stability
Various functions have been audited for "-Wunused-parameter" warnings
and bugs in them got fixed.
* jk/unused-parameter-fixes:
midx: double-check large object write loop
assert NOARG/NONEG behavior of parse-options callbacks
parse-options: drop OPT_DATE()
apply: return -1 from option callback instead of calling exit(1)
cat-file: report an error on multiple --batch options
tag: mark "--message" option with NONEG
show-branch: mark --reflog option as NONEG
format-patch: mark "--no-numbered" option with NONEG
status: mark --find-renames option with NONEG
cat-file: mark batch options with NONEG
pack-objects: mark index-version option as NONEG
ls-files: mark exclude options as NONEG
am: handle --no-patch-format option
apply: mark include/exclude options as NONEG
bundle: dup() output descriptor closer to point-of-use
When writing a bundle to a file, the bundle code actually creates
"your.bundle.lock" using our lockfile interface. We feed that output
descriptor to a child git-pack-objects via run-command, which has the
quirk that it closes the output descriptor in the parent.
To avoid confusing the lockfile code (which still thinks the descriptor
is valid), we dup() it, and operate on the duplicate.
However, this has a confusing side effect: after the dup() but before we
call pack-objects, we have _two_ descriptors open to the lockfile. If we
call die() during that time, the lockfile code will try to clean up the
partially-written file. It knows to close() the file before unlinking,
since on some platforms (i.e., Windows) the open file would block the
deletion. But it doesn't know about the duplicate descriptor. On
Windows, triggering an error at the right part of the code will result
in the cleanup failing and the lockfile being left in the filesystem.
We can solve this by moving the dup() much closer to start_command(),
shrinking the window in which we have the second descriptor open. It's
easy to place this in such a way that no die() is possible. We could
still die due to a signal in the exact wrong moment, but we already
tolerate races there (e.g., a signal could come before we manage to put
the file on the cleanup list in the first place).
As a bonus, this shields create_bundle() itself from the duplicate-fd
trick, and we can simplify its error handling (note that the lock
rollback now happens unconditionally, but that's OK; it's a noop if we
didn't open the lock in the first place).
The included test uses an empty bundle to cause a failure at the right
spot in the code, because that's easy to trigger (the other likely
errors are write() problems like ENOSPC). Note that it would already
pass on non-Windows systems (because they are happy to unlink an
already-open file).
Based-on-a-patch-by: Gaël Lhez <gael.lhez@gmail.com> Signed-off-by: Jeff King <peff@peff.net> Tested-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
tests: add a special setup where rebase.useBuiltin is off
Add a GIT_TEST_REBASE_USE_BUILTIN=false test mode which is equivalent
to running with rebase.useBuiltin=false. This is needed to spot that
we're not introducing any regressions in the legacy rebase version
while we're carrying both it and the new builtin version.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The rebase.useBuiltin variable introduced in 55071ea248 ("rebase:
start implementing it as a builtin", 2018-08-07) was turned on by
default in 5541bd5b8f ("rebase: default to using the builtin rebase",
2018-08-08), but had no documentation.
Let's document it so that users who run into any stability issues with
the C rewrite know there's an escape hatch[1], and make it clear that
needing to turn off builtin rebase means you've found a bug in git.
mingw: replace an obsolete link with the superseding one
The MSDN documentation has been superseded by Microsoft Docs (which is
backed by a repository on GitHub containing many, many files in Markdown
format).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
doc: move extensions.worktreeConfig to the right place
All config extensions are described in technical/repository-version.txt.
I made a mistake of adding it in config.txt instead. This patch moves
it back to where it belongs.
Since repository-version.txt is not part of officially generated
documents (it's not even part of DOC_HTML target), it's only visible
to developers who read plain .txt files. Let's include it in
gitrepository-layout.5 for more visibility. Some minor asciidoc fixes
are required in repository-version.txt to make this happen.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
ref-filter: don't look for objects when outside of a repository
The command 'git ls-remote --sort=authordate <remote>' segfaults when
run outside of a repository, ever since the introduction of its
'--sort' option in 1fb20dfd8e (ls-remote: create '--sort' option,
2018-04-09).
While in general the 'git ls-remote' command can be run outside of a
repository just fine, its '--sort=<key>' option with certain keys does
require access to the referenced objects. This sorting is implemented
using the generic ref-filter sorting facility, which already handles
missing objects gracefully with the appropriate 'missing object deadbeef for HEAD' message. However, being generic means that it
checks replace refs while trying to retrieve an object, and while
doing so it accesses the 'git_replace_ref_base' variable, which has
not been initialized and is still a NULL pointer when outside of a
repository, thus causing the segfault.
Make ref-filter more careful upfront while parsing the format string,
and make it error out when encountering a format atom requiring object
access when we are not in a repository. Also add a test to ensure
that 'git ls-remote --sort' fails gracefully when executed outside of
a repository.
Reported-by: H.Merijn Brand <h.m.brand@xs4all.nl> Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
config: report a bug if git_dir exists without commondir
This did happen at some stage, and was fixed relatively quickly. Make
sure that we detect very quickly, too, should that happen again.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Reviewed-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
rebase: validate -C<n> and --whitespace=<mode> parameters early
It is a good idea to error out early upon seeing, say, `-Cbad`, rather
than starting the rebase only to have the `--am` backend complain later.
Let's do this.
The only options accepting parameters which we pass through to `git am`
(which may, or may not, forward them to `git apply`) are `-C` and
`--whitespace`. The other options we pass through do not accept
parameters, so we do not have to validate them here.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, we parse the options intended for `git am` as if we wanted to
handle them in `git rebase`, and then reconstruct them painstakingly to
define the `git_am_opt` variable.
However, there is a much better way (that I was unaware of, at the time
when I mentored Pratik to implement these options): OPT_PASSTHRU_ARGV.
It is intended for exactly this use case, where command-line options
want to be parsed into a separate `argv_array`.
Let's use this feature.
Incidentally, this also allows us to address a bug discovered by Phillip
Wood, where the built-in rebase failed to understand that the `-C`
option takes an optional argument.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
range-diff: make diff option behavior (e.g. --stat) consistent
Make the behavior when diff options (e.g. "--stat") are passed
consistent with how "diff" behaves.
Before 73a834e9e2 ("range-diff: relieve callers of low-level
configuration burden", 2018-07-22) running range-diff with "--stat"
would produce stat output and the diff output, as opposed to how
"diff" behaves where once "--stat" is specified "--patch" also needs
to be provided to emit the patch output.
As noted in a previous change ("range-diff doc: add a section about
output stability", 2018-11-07) the "--stat" output with "range-diff"
is useless at the moment.
But we should behave consistently with "diff" in anticipation of such
output being useful in the future, because it would make for confusing
UI if "diff" and "range-diff" behaved differently when it came to how
they interpret diff options.
The new behavior is also consistent with the existing documentation
added in ba931edd28 ("range-diff: populate the man page",
2018-08-13). See "[...]also accepts the regular diff options[...]" in
git-range-diff(1).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
win32: replace pthread_cond_*() with much simpler code
The Win32 CONDITION_VARIABLE has better performance and is easier to
maintain, as the code is a lot shorter now (the semantics of the
CONDITION_VARIABLE matches the pthread_cond_t very well).
Note: CONDITION_VARIABLE is not available in Windows XP and below,
but the declared minimal Windows version required to build and run
Git for Windows is Windows Vista (which is also beyond its
end-of-life, but for less long than Windows XP), so that's okay.
Signed-off-by: Loo Rong Jie <loorongjie@gmail.com> Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The function `CreateHardLink()` is available in all supported Windows
versions (even since Windows XP), so there is no more need to resolve it
at runtime.
Helped-by: Max Kirillov <max@max630.net> Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The procedure to install dependencies before testing at Travis CI
is getting revamped for both simplicity and flexibility, taking
advantage of the recent move to the vm-based environment.
* sg/travis-install-dependencies:
travis-ci: install packages in 'ci/install-dependencies.sh'
"git add" needs to internally run "diff-files" equivalent, and the
codepath learned the same optimization as "diff-files" has to run
lstat(2) in parallel to find which paths have been updated in the
working tree.
* bp/add-diff-files-optim:
add: speed up cmd_add() by utilizing read_cache_preload()
The interface into "xdiff" library used to discover the offset and
size of a generated patch hunk by first formatting it into the
textual hunk header "@@ -n,m +k,l @@" and then parsing the numbers
out. A new interface has been introduced to allow callers a more
direct access to them.
* jk/xdiff-interface:
xdiff-interface: drop parse_hunk_header()
range-diff: use a hunk callback
diff: convert --check to use a hunk callback
combine-diff: use an xdiff hunk callback
diff: use hunk callback for word-diff
diff: discard hunk headers for patch-ids earlier
diff: avoid generating unused hunk header lines
xdiff-interface: provide a separate consume callback for hunks
xdiff: provide a separate emit callback for hunks
Assorted fixes for bugs found while auditing -Wunused-parameter
warnings.
* jk/misc-unused-fixes:
approxidate: fix NULL dereference in date_time()
pathspec: handle non-terminated strings with :(attr)
approxidate: handle pending number for "specials"
rev-list: handle flags for --indexed-objects
The code to traverse objects for reachability, used to decide what
objects are unreferenced and expendable, have been taught to also
consider per-worktree refs of other worktrees as starting points to
prevent data loss.
* nd/per-worktree-ref-iteration:
git-worktree.txt: correct linkgit command name
reflog expire: cover reflog from all worktrees
fsck: check HEAD and reflog from other worktrees
fsck: move fsck_head_link() to get_default_heads() to avoid some globals
revision.c: better error reporting on ref from different worktrees
revision.c: correct a parameter name
refs: new ref types to make per-worktree refs visible to all worktrees
Add a place for (not) sharing stuff between worktrees
refs.c: indent with tabs, not spaces
The helper function to refresh the cached stat information in the
in-core index has learned to perform the lstat() part of the
operation in parallel on multi-core platforms.
* bp/refresh-index-using-preload:
refresh_index: remove unnecessary calls to preload_index()
speed up refresh_index() by utilizing preload_index()
"git send-email --transfer-encoding=..." in recent versions of Git
sometimes produced an empty "Content-Transfer-Encoding:" header,
which has been corrected.
* al/send-email-auto-cte-fixup:
send-email: avoid empty transfer encoding header
In preparation to the day when we can deprecate and remove the
"rebase -p", make sure we can skip and later remove tests for
it.
* js/rebase-p-tests:
tests: optionally skip `git rebase -p` tests
t3418: decouple test cases from a previous `rebase -p` test case
t3404: decouple some test cases from outcomes of previous test cases
"git rev-parse --exclude=* --branches --branches" (i.e. first
saying "add only things that do not match '*' out of all branches"
and then adding all branches, without any exclusion this time")
worked as expected, but "--exclude=* --all --all" did not work the
same way, which has been fixed.
* ag/rev-parse-all-exclude-fix:
rev-parse: clear --exclude list after 'git rev-parse --all'
The submodule support has been updated to read from the blob at
HEAD:.gitmodules when the .gitmodules file is missing from the
working tree.
* ao/submodule-wo-gitmodules-checked-out:
t/helper: add test-submodule-nested-repo-config
submodule: support reading .gitmodules when it's not in the working tree
submodule: add a helper to check if it is safe to write to .gitmodules
t7506: clean up .gitmodules properly before setting up new scenario
submodule: use the 'submodule--helper config' command
submodule--helper: add a new 'config' subcommand
t7411: be nicer to future tests and really clean things up
t7411: merge tests 5 and 6
submodule: factor out a config_set_in_gitmodules_file_gently function
submodule: add a print_config_from_gitmodules() helper
* nb/worktree-api-doc:
worktree: rename is_worktree_locked to worktree_lock_reason
worktree: update documentation for lock_reason and lock_reason_valid
A couple of tests used to leave the repository in a state that is
deliberately corrupt, which have been corrected.
* ab/pack-tests-cleanup:
index-pack tests: don't leave test repo dirty at end
pack-objects tests: don't leave test .git corrupt at end
pack-objects test: modernize style
Tests for the recently introduced multi-pack index machinery.
* ds/test-multi-pack-index:
packfile: close multi-pack-index in close_all_packs
multi-pack-index: define GIT_TEST_MULTI_PACK_INDEX
midx: close multi-pack-index on repack
midx: fix broken free() in close_midx()
A pattern with '**' that does not have a slash on either side used
to be an invalid one, but the code now treats such double-asterisks
the same way as two normal asterisks that happen to be adjacent to
each other.
* nd/wildmatch-double-asterisk:
wildmatch: change behavior of "foo**bar" in WM_PATHNAME mode
A fourth class of configuration files (in addition to the
traditional "system wide", "per user in the $HOME directory" and
"per repository in the $GIT_DIR/config") has been introduced so
that different worktrees that share the same repository (hence the
same $GIT_DIR/config file) can use different customization.
* nd/per-worktree-config:
worktree: add per-worktree config files
t1300: extract and use test_cmp_config()
"git ls-remote $there foo" was broken by recent update for the
protocol v2 and stopped showing refs that match 'foo' that are not
refs/{heads,tags}/foo, which has been fixed.
* jk/proto-v2-ref-prefix-fix:
ls-remote: pass heads/tags prefixes to transport
ls-remote: do not send ref prefixes for patterns
Split the overly large Documentation/config.txt file into million
little pieces. This potentially allows each individual piece
included into the manual page of the command it affects more easily.
* nd/config-split: (81 commits)
config.txt: remove config/dummy.txt
config.txt: move worktree.* to a separate file
config.txt: move web.* to a separate file
config.txt: move versionsort.* to a separate file
config.txt: move user.* to a separate file
config.txt: move url.* to a separate file
config.txt: move uploadpack.* to a separate file
config.txt: move uploadarchive.* to a separate file
config.txt: move transfer.* to a separate file
config.txt: move tag.* to a separate file
config.txt: move submodule.* to a separate file
config.txt: move stash.* to a separate file
config.txt: move status.* to a separate file
config.txt: move splitIndex.* to a separate file
config.txt: move showBranch.* to a separate file
config.txt: move sequencer.* to a separate file
config.txt: move sendemail-config.txt to config/
config.txt: move reset.* to a separate file
config.txt: move rerere.* to a separate file
config.txt: move repack.* to a separate file
...
built-in rebase: reinstate `checkout -q` behavior where appropriate
When we converted a `git checkout -q $onto^0` call to use
`reset_head()`, we inadvertently incurred a change from a twoway_merge
to a oneway_merge, as if we wanted a `git reset --hard` instead.
This has performance ramifications under certain, though, as the
oneway_merge needs to lstat() every single index entry whereas
twoway_merge does not.
So let's go back to the old behavior.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, we only accept the flag indicating whether the HEAD should be
detached not. In the next commit, we want to introduce another flag: to
toggle between emulating `reset --hard` vs `checkout -q`.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
`--exclude` from rev-list and rev-parse fails to exclude references if
the next `--branches`, `--tags` or `--remotes` use the optional
inclusive glob because those options are implemented as particular cases
of `--glob=`, which itself requires that exclude patterns begin with
'refs/'.
But it makes sense for `--branches=glob` and friends to be aware that
exclusions patterns for them shouldn't be 'refs/<type>/' prefixed, the
same way exclude patterns for `--branches` and friends (without the
optional glob) already are.
Let's record in 'refs.c:struct ref_filter' which context the exclude
pattern is tied to, so refs.c:filter_refs() can decide if it should
ignore the prefix when trying to match.
Signed-off-by: Rafael Ascensão <rafa.almas@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
refs: show --exclude failure with --branches/tags/remotes=glob
The documentation of `--exclude=` option from rev-list and rev-parse
explicitly states that exclude patterns *should not* start with 'refs/'
when used with `--branches`, `--tags` or `--remotes`.
However, following this advice results in refereces not being excluded
if the next `--branches`, `--tags`, `--remotes` use the optional
inclusive glob.
Demonstrate this failure.
Signed-off-by: Rafael Ascensão <rafa.almas@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
When editing patches e.g. in `git add -e`, it is quite common that a
hunk ends up having no -/+ lines, i.e. it is now supposed to do nothing.
This use case was broken by ad6e8ed37bc1 (apply: reject a hunk that does
not do anything, 2015-06-01) with the good intention of catching a very
real, different issue in hand-edited patches.
So let's use the `--recount` option as the tell-tale whether the user
would actually be okay with no-op hunks.
Add a test case to make sure that this use case does not regress again.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Reviewed-by: Josh Steadmon <steadmon@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
status: rebase and merge can be in progress at the same time
Since `git rebase -r` was introduced, that is possible. But our
machinery did not think that possible, and failed to say anything about
the rebase in progress when in the middle of a merge.
Let's work around that in the minimal fashion.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
built-in rebase --skip/--abort: clean up stale .git/<name> files
The scripted version of the rebase used to execute `git reset --hard`
when skipping or aborting. When we ported this to C, we did update the
worktree and some reflogs, but we failed to imitate `git reset --hard`'s
behavior regarding files in .git/ such as MERGE_HEAD.
Let's address this oversight.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
rebase -i: include MERGE_HEAD into files to clean up
Every once in a while, the interactive rebase makes sure that no stale
files are lying around. These days, we need to include MERGE_HEAD into
that set of files, as the `merge` command will generate them.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we detect that a `merge` can be skipped because the merged commit
is already an ancestor of HEAD, we do not need to commit, therefore
writing the MERGE_HEAD file is useless.
It is actually worse than useless: a subsequent `git commit` will pick
it up and think that we want to merge that commit, still.
To avoid that, move the code that writes the MERGE_HEAD file to a
location where we already know that the `merge` cannot be skipped.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
rebase -r: demonstrate bug with conflicting merges
When calling `merge` on a branch that has already been merged, that
`merge` is skipped quietly, but currently a MERGE_HEAD file is being
left behind and will then be grabbed by the next `pick` (that did
not want to create a *merge* commit).
Demonstrate this.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
511726e4b1 ("builtin/notes: fix premature failure when trying to add
the empty blob", 2014-11-09) removed the check for !len but left a
call to free the buffer that will be otherwise NULL
Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com> Acked-by: Johan Herland <johan@herland.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
p3400: replace calls to `git checkout -b' by `git checkout -B'
p3400 makes a copy of the current repository to test git-rebase
performance, and creates new branches in the copy with `git checkout
-b'. If the original repository has branches with the same name as the
script is trying to create, this operation will fail.
This replaces these calls by `git checkout -B' to force the creation and
update of these branches.
Signed-off-by: Alban Gruin <alban.gruin@gmail.com> Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
build: fix broken command-list.h generation with core.autocrlf
The script generate-cmdlist.sh needs input text files in UNIX line
ending to work correctly. It's been fine even with core.autocrlf set
because Documentation/git-*.txt is forced LF conversion.
But this leaves out gitk.txt and also Documentation/*config.txt that
recently becomes new input for this script. Update the attribute file
to force LF on all *.txt files to be on the safe side.
For more details, please see 00ddc9d13c (Fix build with
core.autocrlf=true - 2017-05-09)
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch makes the output of `git shortlog -nse v2.10.0..master`
duplicate-free by taking/guessing the current and preferred
addresses for authors that appear with more than one address.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
range-diff: fix regression in passing along diff options
In 73a834e9e2 ("range-diff: relieve callers of low-level configuration
burden", 2018-07-22) we broke passing down options like --no-patch,
--stat etc.
Fix that regression, and add a test asserting the pre-73a834e9e2
behavior for some of these diff options.
As noted in a change leading up to this ("range-diff doc: add a
section about output stability", 2018-11-07) the output is not meant
to be stable. So this regression test will likely need to be tweaked
once we get a "proper" --stat option.
See
https://public-inbox.org/git/nycvar.QRO.7.76.6.1811071202480.39@tvgsbejvaqbjf.bet/
for a further explanation of the regression. The fix here is not the
same as in Johannes's on-list patch, for reasons that'll be explained
in a follow-up commit.
The quoting of "EOF" here mirrors that of an earlier test. Perhaps
that should be fixed, but let's leave that up to a later cleanup
change.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
range-diff doc: add a section about output stability
The range-diff command is already advertised as porcelain, but let's
make it really clear that the output is completely subject to change,
particularly when it comes to diff options such as --stat. Right now
that option doesn't work, but fixing that is the subject of a later
change.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
built-in rebase --autostash: leave the current branch alone if possible
When we converted a `git reset --hard` call in the original Unix shell
script to built-in code, we asked to reset the worktree and the index
and explicitly *not* to detach the HEAD. By mistake, though, we still
did. Let's fix this.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
built-in rebase: demonstrate regression with --autostash
An unnamed colleague of Ævar Arnfjörð Bjarmason reported a breakage
where a `pull --rebase` (which did not really need to do anything but
stash, see that nothing was changed, and apply the stash again) also
detached the HEAD.
This patch adds a minimal reproducer for this regression.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Windows: force-recompile git.res for differing architectures
When git.rc is compiled into git.res, the result is actually dependent
on the architecture. That is, you cannot simply link a 32-bit git.res
into a 64-bit git.exe.
Therefore, to allow 32-bit and 64-bit builds in the same directory, we
let git.res depend on GIT-PREFIX so that it gets recompiled when
compiling for a different architecture (this works because the exec path
changes based on the architecture: /mingw32/libexec/git-core for 32-bit
and /mingw64/libexec/git-core for 64-bit).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we see a time like "noon", we pass "12" to our date_time() helper,
which sets the hour to 12pm. If the current time is before noon, then we
wrap around to yesterday using date_yesterday(). But unlike the normal
calls to date_yesterday() from approxidate_alpha(), we pass a NULL "num"
parameter. Since c27cc94fad (approxidate: handle pending number for
"specials", 2018-11-02), that causes a segfault.
One way to fix this is by checking for NULL. But arguably date_time() is
abusing our helper by passing NULL in the first place (and this is the
only case where one of these "special" parsers is used this way). So
instead, let's have it just do the 1-day subtraction itself. It's still
just a one-liner due to our update_tm() helper.
Note that the test added here is a little funny, as we say "10am noon",
which makes the "10am" seem pointless. But this bug can only be
triggered when it the currently-parsed hour is before the special time.
The latest special time is "tea" at 1700, but t0006 uses a hard-coded
TEST_DATE_NOW of 1900. We could reset TEST_DATE_NOW, but that may lead
to confusion in other tests. Just saying "10am noon" makes this test
self-contained.
Reported-by: Carlo Arenas <carenas@gmail.com> Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
pull: handle --verify-signatures for unborn branch
We usually just forward the --verify-signatures option along to
git-merge, and trust it to do the right thing. However, when we are on
an unborn branch (i.e., there is no HEAD yet), we handle this case
ourselves without even calling git-merge. And in this code path, we do
not respect the verification option at all.
It may be more maintainable in the long run to call git-merge for the
unborn case. That would fix this bug, as well as prevent similar ones in
the future. But unfortunately it's not easy to do. As t5520.3
demonstrates, there are some special cases that git-merge does not
handle, like "git pull .. master:master" (by the time git-merge is
invoked, we've overwritten the unborn HEAD).
So for now let's just teach git-pull to handle this feature.
Reported-by: Felix Eckhofer <felix@eckhofer.com> Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
merge: handle --verify-signatures for unborn branch
When git-merge sees that we are on an unborn branch (i.e., there is no
HEAD), it follows a totally separate code path than the usual merge
logic. This code path does not know about verify_signatures, and so we
fail to notice bad or missing signatures.
This has been broken since --verify-signatures was added in efed002249
(merge/pull: verify GPG signatures of commits being merged, 2013-03-31).
In an ideal world, we'd unify the flow for this case with the regular
merge logic, which would fix this bug and avoid introducing similar
ones. But because the unborn case is so different, it would be a burden
on the rest of the function to continually handle the missing HEAD. So
let's just port the verification check to this special case.
Reported-by: Felix Eckhofer <felix@eckhofer.com> Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The logic to implement "merge --verify-signatures" is inline in
cmd_merge(), but this site misses some cases. Let's extract the logic
into a function so we can call it from more places.
We'll move it to commit.[ch], since one of the callers (git-pull) is
outside our source file. This function isn't all that general (after
all, its main function is to exit the program) but it's not worth trying
to fix that. The heavy lifting is done by check_commit_signature(), and
our purpose here is just sharing the die() logic. We'll mark it with a
comment to make that clear.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>