Merge branch 'jc/fsck-retire-require-eoh' into maint
A fix to a minor regression to "git fsck" in v2.2 era that started
complaining about a body-less tag object when it lacks a separator
empty line after its header to separate it with a non-existent body.
* jc/fsck-retire-require-eoh:
fsck: it is OK for a tag and a commit to lack the body
We used to ask libCURL to use the most secure authentication method
available when talking to an HTTP proxy only when we were told to
talk to one via configuration variables. We now ask libCURL to
always use the most secure authentication method, because the user
can tell libCURL to use an HTTP proxy via an environment variable
without using configuration variables.
* et/http-proxyauth:
http: always use any proxy auth method available
Merge branch 'jc/unexport-git-pager-in-use-in-pager' into maint
When you say "!<ENTER>" while running say "git log", you'd confuse
yourself in the resulting shell, that may look as if you took
control back to the original shell you spawned "git log" from but
that isn't what is happening. To that new shell, we leaked
GIT_PAGER_IN_USE environment variable that was meant as a local
communication between the original "Git" and subprocesses that was
spawned by it after we launched the pager, which caused many
"interesting" things to happen, e.g. "git diff | cat" still paints
its output in color by default.
Stop leaking that environment variable to the pager's half of the
fork; we only need it on "Git" side when we spawn the pager.
* jc/unexport-git-pager-in-use-in-pager:
pager: do not leak "GIT_PAGER_IN_USE" to the pager
Merge branch 'rh/test-color-avoid-terminfo-in-original-home' into maint
An ancient test framework enhancement to allow color was not
entirely correct; this makes it work even when tput needs to read
from the ~/.terminfo under the user's real HOME directory.
* rh/test-color-avoid-terminfo-in-original-home:
test-lib.sh: fix color support when tput needs ~/.terminfo
Revert "test-lib.sh: do tests for color support after changing HOME"
Merge branch 'me/fetch-into-shallow-safety' into maint
"git fetch --depth=<depth>" and "git clone --depth=<depth>" issued
a shallow transfer request even to an upload-pack that does not
support the capability.
* me/fetch-into-shallow-safety:
fetch-pack: check for shallow if depth given
When we want to write out a loose object file, we have
always first made sure we don't already have the object
somewhere. Since 33d4221 (write_sha1_file: freshen existing
objects, 2014-10-15), we also update the timestamp on the
file, so that a simultaneous prune knows somebody is
likely to reference it soon.
If our utime() call fails, we treat this the same as not
having the object in the first place; the safe thing to do
is write out another copy. However, the loose-object check
accidentally inverts the utime() check; it returns failure
_only_ when the utime() call actually succeeded. Thus it was
failing to protect us there, and in the normal case where
utime() succeeds, it caused us to pointlessly write out and
link the object.
This passed our freshening tests, because writing out the
new object is certainly _one_ way of updating its utime. So
the normal case was inefficient, but not wrong.
While we're here, let's also drop a comment in front of the
check_and_freshen functions, making a note of their return
type (since it is not our usual "0 for success, -1 for
error").
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
rebase: return non-zero error code if format-patch fails
Since e481af06 (rebase: Handle cases where format-patch fails) we
notice if format-patch fails and return immediately from
git-rebase--am. We save the return value with ret=$?, but then we
return $?, which is usually zero in this case.
Fix this by returning $ret instead.
Cc: Andrew Wong <andrew.kw.w@gmail.com> Signed-off-by: Clemens Buchacher <clemens.buchacher@intel.com> Helped-by: Jorge Nunes <jorge.nunes@intel.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Documentation/branch: document -M and -D in terms of --force
Now that we have proper documentation for --force's interaction with -d
and -m, we can avoid duplication and consider -M and -D as convenience
aliases for -m --force and -d --force.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr> Signed-off-by: Junio C Hamano <gitster@pobox.com>
pager: do not leak "GIT_PAGER_IN_USE" to the pager
Since 2e6c012e (setup_pager: set GIT_PAGER_IN_USE, 2011-08-17), we
export GIT_PAGER_IN_USE so that a process that becomes the upstream
of the spawned pager can still tell that we have spawned the pager
and decide to do colored output even when its output no longer goes
to a terminal (i.e. isatty(1)).
But we forgot to clear it from the enviornment of the spawned pager.
This is not a problem in a sane world, but if you have a handful of
thousands Git users in your organization, somebody is bound to do
strange things, e.g. typing "!<ENTER>" instead of 'q' to get control
back from $LESS. GIT_PAGER_IN_USE is still set in that subshell
spawned by "less", and all sorts of interesting things starts
happening, e.g. "git diff | cat" starts coloring its output.
We can clear the environment variable in the half of the fork that
runs the pager to avoid the confusion.
Signed-off-by: Junio C Hamano <gitster@pobox.com> Acked-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
rev-list: disable --use-bitmap-index when pruning commits
The reachability bitmaps do not have enough information to
tell us which commits might have changed path "foo", so the
current code produces wrong answers for:
git rev-list --use-bitmap-index --count HEAD -- foo
(it silently ignores the "foo" limiter). Instead, we should
fall back to doing a normal traversal (it is OK to fall
back rather than complain, because --use-bitmap-index is a
pure optimization, and might not kick in for other reasons,
such as there being no bitmaps in the repository).
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
config.c: fix writing config files on Windows network shares
Renaming to an existing file doesn't work on Windows network shares if the
target file is open.
munmap() the old config file before commit_lock_file.
Signed-off-by: Karsten Blees <blees@dcon.de> Acked-by: Jeff King <peff@peff.net> Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
We set CURLOPT_PROXYAUTH to use the most secure authentication
method available only when the user has set configuration variables
to specify a proxy. However, libcurl also supports specifying a
proxy through environment variables. In that case libcurl defaults
to only using the Basic proxy authentication method, because we do
not use CURLOPT_PROXYAUTH.
Set CURLOPT_PROXYAUTH to always use the most secure authentication
method available, even when there is no git configuration telling us
to use a proxy. This allows the user to use environment variables to
configure a proxy that requires an authentication method different
from Basic.
Signed-off-by: Enrique A. Tobis <etobis@twosigma.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
fsck: it is OK for a tag and a commit to lack the body
When fsck validates a commit or a tag, it scans each line in the
header of the object using helper functions such as "start_with()",
etc. that work on a NUL terminated buffer, but before a1e920a0
(index-pack: terminate object buffers with NUL, 2014-12-08), the
validation functions were fed the object data in a piece of memory
that is not necessarily terminated with a NUL.
We added a helper function require_end_of_header() to be called at
the beginning of these validation functions to insist that the
object data contains an empty line before its end. The theory is
that the validating functions will notice and stop when it hits an
empty line as a normal end of header (or a required header line that
is missing) without scanning past the end of potentially not
NUL-terminated buffer.
But the theory forgot that in the older days, Git itself happily
created objects with only the header lines without a body. This
caused Git 2.2 and later to issue an unnecessary warning in some
existing repositories.
With a1e920a0, we do not need to require an empty line (or the body)
in these objects to safely parse and validate them. Drop the
offending "must have an empty line" check from this helper function,
while keeping the other check to make sure that there is no NUL in
the header part of the object, and adjust the name of the helper to
what it does accordingly.
Noticed-by: Wolfgang Denk <wd@denx.de> Helped-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Merge branch 'jk/make-fix-dependencies' into maint
Build clean-up.
* jk/make-fix-dependencies:
Makefile: silence perl/PM.stamp recipe
Makefile: avoid timestamp updates to GIT-BUILD-OPTIONS
Makefile: drop dependency between git-instaweb and gitweb
There was a dead code that used to handle "git pull --tags" and
show special-cased error message, which was made irrelevant when
the semantics of the option changed back in Git 1.9 days.
* pt/pull-tags-error-diag:
pull: remove --tags error in no merge candidates case
Merge branch 'jk/diagnose-config-mmap-failure' into maint
The configuration reader/writer uses mmap(2) interface to access
the files; when we find a directory, it barfed with "Out of memory?".
* jk/diagnose-config-mmap-failure:
xmmap(): drop "Out of memory?"
config.c: rewrite ENODEV into EISDIR when mmap fails
config.c: avoid xmmap error messages
config.c: fix mmap leak when writing config
read-cache.c: drop PROT_WRITE from mmap of index
Merge branch 'jk/squelch-missing-link-warning-for-unreachable' into maint
Recent "git prune" traverses young unreachable objects to safekeep
old objects in the reachability chain from them, which sometimes
caused error messages that are unnecessarily alarming.
* jk/squelch-missing-link-warning-for-unreachable:
suppress errors on missing UNINTERESTING links
silence broken link warnings with revs->ignore_missing_links
add quieter versions of parse_{tree,commit}
Merge branch 'mm/rebase-i-post-rewrite-exec' into maint
"git rebase -i" fired post-rewrite hook when it shouldn't (namely,
when it was told to stop sequencing with 'exec' insn).
* mm/rebase-i-post-rewrite-exec:
t5407: use <<- to align the expected output
rebase -i: fix post-rewrite hook with failed exec command
rebase -i: demonstrate incorrect behavior of post-rewrite
The improved ARRAY_SIZE macro uses BARF_UNLESS_AN_ARRAY which expands
to a valid check for recent gcc versions and to 0 for older gcc
versions but is not defined on non-gcc builds.
Non-gcc builds need this macro to expand to 0 as well. The current outer
test (defined(__GNUC__) && (__GNUC__ >= 3)) is a strictly weaker
condition than the inner test (GIT_GNUC_PREREQ(3, 1)) so we can omit the
outer test and cause the BARF_UNLESS_AN_ARRAY macro to be defined
correctly on non-gcc builds as well as gcc builds with older versions.
Signed-off-by: Charles Bailey <cbailey32@bloomberg.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
test-lib.sh: fix color support when tput needs ~/.terminfo
If tput needs ~/.terminfo for the current $TERM, then tput will
succeed before HOME is changed to $TRASH_DIRECTORY (causing color to
be set to 't') but fail afterward.
One possible way to fix this is to treat HOME like TERM: back up the
original value and temporarily restore it before say_color() runs
tput.
Instead, pre-compute and save the color control sequences before
changing either TERM or HOME. Use the saved control sequences in
say_color() rather than call tput each time. This avoids the need to
back up and restore the TERM and HOME variables, and it avoids the
overhead of a subshell and two invocations of tput per call to
say_color().
Signed-off-by: Richard Hansen <rhansen@bbn.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
docs: clarify that --encoding can produce invalid sequences
In the common case that the commit encoding matches the
output encoding, we do not touch the buffer at all, which
makes things much more efficient. But it might be unclear to
a consumer that we will pass through bogus sequences.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a repository is first fetched as a shallow clone, either by
git-clone or by fetching into an empty repo, the server's capabilities
are not currently consulted. The client will send shallow requests even
if the server does not understand them, and the resulting error may be
unhelpful to the user. This change pre-emptively checks so we can exit
with a helpful error if necessary.
Signed-off-by: Mike Edgar <adgar@google.com> Reviewed-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Merge branch 'jk/http-backend-deadlock' into maint
Communication between the HTTP server and http_backend process can
lead to a dead-lock when relaying a large ref negotiation request.
Diagnose the situation better, and mitigate it by reading such a
request first into core (to a reasonable limit).
* jk/http-backend-deadlock:
http-backend: spool ref negotiation requests to buffer
t5551: factor out tag creation
http-backend: fix die recursion with custom handler
Merge branch 'jh/filter-empty-contents' into maint
The clean/smudge interface did not work well when filtering an
empty contents (failed and then passed the empty input through).
It can be argued that a filter that produces anything but empty for
an empty input is nonsense, but if the user wants to do strange
things, then why not?
* jh/filter-empty-contents:
sha1_file: pass empty buffer to index empty file
git describe does not show 'the most recent tag that is reachable from a
commit', but a descriptive name based on this tag. Fix the description to
reflect that.
Suggested-by: Albert Netymk <albertnetymk@gmail.com> Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr> Signed-off-by: Junio C Hamano <gitster@pobox.com>
That commit was an attempt to improve the safety of applying
a stash, because the application process may create
conflicted index entries, after which it is hard to restore
the original index state.
Unfortunately, this hurts some common workflows around "git
stash -k", like:
git add -p ;# (1) stage set of proposed changes
git stash -k ;# (2) get rid of everything else
make test ;# (3) make sure proposal is reasonable
git stash apply ;# (4) restore original working tree
If you "git commit" between steps (3) and (4), then this
just works. However, if these steps are part of a pre-commit
hook, you don't have that opportunity (you have to restore
the original state regardless of whether the tests passed or
failed).
It's possible that we could provide better tools for this
sort of workflow. In particular, even before ed178ef, it
could fail with a conflict if there were conflicting hunks
in the working tree and index (since the "stash -k" puts the
index version into the working tree, and we then attempt to
apply the differences between HEAD and the old working tree
on top of that). But the fact remains that people have been
using it happily for a while, and the safety provided by ed178ef is simply not that great. Let's revert it for now.
In the long run, people can work on improving stash for this
sort of workflow, but the safety tradeoff is not worth it in
the meantime.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
hooks/pre-auto-gc: adjust power checking for newer OS X
The output of "pmset -g batt" changed at some point from "Currently
drawing from 'AC Power'" to the slightly different "Now drawing from
'AC Power'". Starting the match from "drawing" makes the check work
in both old and new versions of OS X.
Signed-off-by: Panagiotis Astithas <pastith@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
l10n: de.po: change error message from "sagen" to "Meinten Sie"
We should not use "sagen" if someone has written something wrong.
Although it's "say" in English, we should not use it in German
and instead use our normal error message.
index-pack: avoid excessive re-reading of pack directory
Since 45e8a74 (has_sha1_file: re-check pack directory before
giving up, 2013-08-30), we spend extra effort for
has_sha1_file to give the right answer when somebody else is
repacking. Usually this effort does not matter, because
after finding that the object does not exist, the next step
is usually to die().
However, some code paths make a large number of
has_sha1_file checks which are _not_ expected to return 1.
The collision test in index-pack.c is such a case. On a
local system, this can cause a performance slowdown of
around 5%. But on a system with high-latency system calls
(like NFS), it can be much worse.
This patch introduces a "quick" flag to has_sha1_file which
callers can use when they would prefer high performance at
the cost of false negatives during repacks. There may be
other code paths that can use this, but the index-pack one
is the most obviously critical, so we'll start with
switching that one.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
commit: cope with scissors lines in commit message
The diff and submodule shortlog appended to the commit message template
by 'git commit --verbose' are not stripped when the commit message
contains an indented scissors line.
When cleaning up a commit message with 'git commit --verbose' or
'--cleanup=scissors' the code is careful and triggers only on a pure
scissors line, i.e. a line containing nothing but a comment character, a
space, and the scissors cut. This is good, because people can embed
scissors lines in the commit message while using 'git commit --verbose',
and the text they write after their indented scissors line doesn't get
deleted.
While doing so, however, the cleanup function only looks at the first
line matching the scissors pattern and if it doesn't start at the
beginning of the line, then the function just returns without performing
any cleanup. This is wrong, because a "real" scissors line added by
'git commit --verbose' might follow, and in that case the diff and
submodule shortlog get included in the commit message.
Fix this by changing the scissors pattern to match only at the beginning
of the line, yet be careful to catch scissors on the first line as well.
Helped-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: SZEDER Gábor <szeder@ira.uka.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
tcsh users who happen to have 'set noclobber' elsewhere in their
~/.tcshrc or ~/.cshrc startup files get a 'File exist' error, and
the tcsh completion file doesn't get generated/updated.
Adding a `!` in the redirect works correctly for both clobber (default)
and 'set noclobber' users.
Reviewed-by: Christian Couder <christian.couder@gmail.com> Signed-off-by: Ariel Faigon <github.2009@yendor.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
fsck: report errors if reflog entries point at invalid objects
Previously, if a reflog entry's old or new SHA-1 was not resolvable to
an object, that SHA-1 was silently ignored. Instead, report such cases
as errors.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
New function, extracted from fsck_handle_reflog_ent(). The extra
is_null_sha1() test for the new reference is currently unnecessary, as
reflogs are deleted when the reference itself is deleted. But it
doesn't hurt, either.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The last argument of reencode_string_len() is an 'int *' which is
assigned the length of the converted string. When NO_ICONV is defined,
however, reencode_string_len() is stubbed out by the macro:
#define reencode_string_len(a,b,c,d,e) NULL
which never assigns a value to the final argument. When called like
this:
int n;
char *s = reencode_string_len(..., &n);
if (s)
do_something(s, n);
some compilers complain that 'n' is used uninitialized within the
conditional.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com> Reviewed-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Merge branch 'rs/plug-leak-in-pack-bitmaps' into maint
The code to read pack-bitmap wanted to allocate a few hundred
pointers to a structure, but by mistake allocated and leaked memory
enough to hold that many actual structures. Correct the allocation
size and also have it on stack, as it is small enough.
Various documentation mark-up fixes to make the output more
consistent in general and also make AsciiDoctor (an alternative
formatter) happier.
* jk/asciidoc-markup-fix:
doc: convert AsciiDoc {?foo} to ifdef::foo[]
doc: put example URLs and emails inside literal backticks
doc: drop backslash quoting of some curly braces
doc: convert \--option to --option
doc/add: reformat `--edit` option
doc: fix length of underlined section-title
doc: fix hanging "+"-continuation
doc: fix unquoted use of "{type}"
doc: fix misrendering due to `single quote'