diff.c: prepare to use parse_options() for parsing
This is a preparation step to start using parse_options() to parse
diff/revision options instead of what we have now. There are a couple
of good things from using parse_options():
- better help usage
- easier to add new options
- better completion support
- help usage generation
- better integration with main command option parser. We can just
concat the main command's option array and diffopt's together and
parse all in one go.
- detect colidding options (e.g. --reverse is used by revision code,
so diff code can't use it as long name for -R)
- consistent syntax, e.g. option that takes mandatory argument will
now accept both "--option=value" and "--option value".
The plan is migrate all diff/rev options to parse_options(). Then we
could get rid of diff_opt_parse() and expose parseopts[] directly to
the caller.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Bitfield addresses cannot be passed around in a pointer. This makes it
hard to use parse-options to set/unset them. Turn this struct to
normal integers. This of course increases the size of this struct
multiple times, but since we only have a handful of diff_options
variables around, memory consumption is not at all a concern.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
parse-options: allow ll_callback with OPTION_CALLBACK
OPTION_CALLBACK is much simpler/safer to use, but parse_opt_cb does
not allow access to parse_opt_ctx_t, which sometimes is useful
(e.g. to obtain the prefix).
Extending parse_opt_cb to take parse_opt_cb could result in a lot of
changes. Instead let's just allow ll_callback to be used with
OPTION_CALLBACK. The user will have to be careful, not to change
anything in ctx, or return wrong result code. But that's the price for
ll_callback.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Give names to these magic negative numbers. Make parse_opt_ll_cb
return an enum to make clear it can actually control parse_options()
with different return values (parse_opt_cb can too, but nobody needs
it).
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
parse-options: disable option abbreviation with PARSE_OPT_KEEP_UNKNOWN
parse-options can unambiguously find an abbreviation only if it sees
all available options. This is usually the case when you use
parse_options(). But there are other callers like blame or shortlog
which uses parse_options_start() in combination with a custom option
parser, like rev-list. parse-options cannot see all options in this
case and will get abbrev detection wrong. Disable it.
t7800 needs update because --symlink no longer expands to --symlinks
and will be passed down to git-diff, which will not recognize it. I
still think this is the correct thing to do. But if --symlink has been
actually used in the wild, we would just add an option alias for it.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is to help reimplement diff_opt_parse() using parse_options().
The behavior of parse_options() is changed to be the same as the
other:
- no argv0 in argv[], everything can be processed
- argv[] must not be updated, it's the caller's job to do that
- return the number of arguments processed
- leave all unknown options / non-options alone (this one can already
be achieved with PARSE_OPT_KEEP_UNKNOWN and
PARSE_OPT_STOP_AT_NON_OPTION)
This mode is NOT supposed to stay here for long. It's to help
converting diff/rev option parsing. Once that work is over and we can
just use parse_options() throughout the code base, this will be
deleted.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git gc" and "git repack" did not close the open packfiles that
they found unneeded before removing them, which didn't work on a
platform incapable of removing an open file. This has been
corrected.
* js/gc-repack-close-before-remove:
gc/repack: release packs when needed
The "--format=<placeholder>" option of for-each-ref, branch and tag
learned to show a few more traits of objects that can be learned by
the object_info API.
* ot/ref-filter-object-info:
ref-filter: give uintmax_t to format with %PRIuMAX
ref-filter: add docs for new options
ref-filter: add tests for deltabase
ref-filter: add deltabase option
ref-filter: add tests for objectsize:disk
ref-filter: add check for negative file size
ref-filter: add objectsize:disk option
Flaky tests can now be repeatedly run under load with the
"--stress" option.
* sg/stress-test:
test-lib: add the '--stress' option to run a test repeatedly under load
test-lib-functions: introduce the 'test_set_port' helper function
test-lib: set $TRASH_DIRECTORY earlier
test-lib: consolidate naming of test-results paths
test-lib: parse command line options earlier
test-lib: parse options in a for loop to keep $@ intact
test-lib: extract Bash version check for '-x' tracing
test-lib: translate SIGTERM and SIGHUP to an exit
The loose object cache used to optimize existence look-up has been
updated.
* rs/loose-object-cache-perffix:
object-store: retire odb_load_loose_cache()
object-store: use one oid_array per subdirectory for loose cache
object-store: factor out odb_clear_loose_cache()
object-store: factor out odb_loose_cache()
Earlier we added "-Wformat-security" to developer builds, assuming
that "-Wall" (which includes "-Wformat" which in turn is required
to use "-Wformat-security") is always in effect. This is not true
when config.mak.autogen is in use, unfortunately. This has been
fixed by unconditionally adding "-Wall" to developer builds.
* jk/dev-build-format-security:
config.mak.dev: add -Wall, primarily for -Wformat, to help autoconf users
"git cherry-pick -m1" was forbidden when picking a non-merge
commit, even though there _is_ parent number 1 for such a commit.
This was done to avoid mistakes back when "cherry-pick" was about
picking a single commit, but is no longer useful with "cherry-pick"
that can pick a range of commits. Now the "-m$num" option is
allowed when picking any commit, as long as $num names an existing
parent of the commit.
Technically this is a backward incompatible change; hopefully
nobody is relying on the error-checking behaviour.
* so/cherry-pick-always-allow-m1:
t3506: validate '-m 1 -ff' is now accepted for non-merge commits
t3502: validate '-m 1' argument is now accepted for non-merge commits
cherry-pick: do not error on non-merge commits when '-m 1' is specified
t3510: stop using '-m 1' to force failure mid-sequence of cherry-picks
"git worktree remove" and "git worktree move" refused to work when
there is a submodule involved. This has been loosened to ignore
uninitialized submodules.
* nd/worktree-remove-with-uninitialized-submodules:
worktree: allow to (re)move worktrees with uninitialized submodules
The test suite tried to see if it is run under bash, but the check
itself failed under some other implementations of shell (notably
under NetBSD). This has been corrected.
* sg/test-bash-version-fix:
test-lib: check Bash version for '-x' without using shell arrays
* rb/hpe:
compat/regex/regcomp.c: define intptr_t and uintptr_t on NonStop
git-compat-util.h: add FLOSS headers for HPE NonStop
config.mak.uname: support for modern HPE NonStop config.
transport-helper: drop read/write errno checks
transport-helper: use xread instead of read
With zsh, "git cmd path<TAB>" was completed to "git cmd path name"
when the completed path has a special character like SP in it,
without any attempt to keep "path name" a single filename. This
has been fixed to complete it to "git cmd path\ name" just like
Bash completion does.
* cy/zsh-completion-SP-in-path:
completion: treat results of git ls-tree as file paths
zsh: complete unquoted paths with spaces correctly
The core.worktree setting in a submodule repository should not be
pointing at a directory when the submodule loses its working tree
(e.g. getting deinit'ed), but the code did not properly maintain
this invariant.
* sb/submodule-unset-core-worktree-when-worktree-is-lost:
submodule deinit: unset core.worktree
submodule--helper: fix BUG message in ensure_core_worktree
submodule: unset core.worktree if no working tree is present
submodule update: add regression test with old style setups
"git log -G<regex>" looked for a hunk in the "git log -p" patch
output that contained a string that matches the given pattern.
Optimize this code to ignore binary files, which by default will
not show any hunk that would match any pattern (unless textconv or
the --text option is in effect, that is).
Lines that begin with a certain keyword that come over the wire, as
well as lines that consist only of one of these keywords, ought to
be painted in color for easier eyeballing, but the latter was
broken ever since the feature was introduced in 2.19, which has
been corrected.
* hn/highlight-sideband-keywords:
sideband: color lines with keyword only