'pushdefault' doesn't come up. This is because "$cur" is matched with
"remote.*" and a list of remotes are completed. Add 'pushdefault' as a
candidate for completion too, using __gitcomp_nl_append ().
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
'autosetupmerge' and 'autosetuprebase' don't come up. This is because
"$cur" is matched with "branch.*" and a list of branches are
completed. Add 'autosetupmerge', 'autosetuprebase' as candidates for
completion too, using __gitcomp_nl_append ().
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The first candidate has the suffix ".", and the second/ third candidates
have the suffix " ". To facilitate completions of this kind, create a
variation of __gitcomp_nl () that appends to the existing list of
completion candidates, COMPREPLY.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
If zsh completion is being read from a location that is different from
system-wide default, it is likely that the user is trying to use a
custom version, perhaps closer to the bleeding edge, installed in her
own directory. We will more likely to find the matching bash completion
script in the same directory than in those system default places.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* fc/remote-helper-fixes:
remote-hg: test 'shared_path' in a moved clone
remote-hg: add tests for special filenames
remote-hg: fix 'shared path' path
remote-helpers: add extra safety checks
remote-hg: avoid buggy strftime()
Two packfiles that contain the same set of objects have
traditionally been named identically, but that made repacking a
repository that is already fully packed without any cruft with a
different packing parameter cumbersome. Update the convention to
name the packfile after the bytestream representation of the data,
not after the set of objects in it.
* jk/name-pack-after-byte-representation:
pack-objects doc: treat output filename as opaque
pack-objects: name pack files after trailer hash
sha1write: make buffer const-correct
"git diff ../else/where/A ../else/where/B" when ../else/where is
clearly outside the repository, and "git diff --no-index A B", do
not have to look at the index at all, but we used to read the index
unconditionally.
* tg/diff-no-index-refactor:
diff: avoid some nesting
diff: add test for --no-index executed outside repo
diff: don't read index when --no-index is given
diff: move no-index detection to builtin/diff.c
Show the total number of paths and the number of paths shown so far
when "git difftool" prompts to launch an external diff tool, which
would give users some sense of progress.
* zk/difftool-counts:
diff.c: fix some recent whitespace style violations
difftool: display the number of files in the diff queue in the prompt
Make "git push origin master" update the same ref that would be
updated by our 'master' when "git push origin" (no refspecs) is run
while the 'master' branch is checked out, which makes "git push"
more symmetric to "git fetch" and more usable for the triangular
workflow.
* jc/push-refmap:
push: also use "upstream" mapping when pushing a single ref
push: use remote.$name.push as a refmap
builtin/push.c: use strbuf instead of manual allocation
Subversion serf backend in versions 1.8.5 and below has a bug(*) that the
function creating the descriptor of a file change -- add_file() --
doesn't make a copy of its third argument when storing it on the
returned descriptor. As a result, by the time this field is used (in
transactions of file copying or renaming) it may well be released, and
the memory reused.
One of its possible manifestations is the svn assertion triggering on an
invalid path, with a message
This patch works around this bug, by storing the value to be passed as
the third argument to add_file() in a local variable with the same scope
as the file change descriptor, making sure their lifetime is the same.
* [ew: fixed in Subversion r1553376 as noted by Jonathan Nieder]
Cc: Benjamin Pabst <benjamin.pabst85@gmail.com> Signed-off-by: Eric Wong <normalperson@yhbt.net> Reviewed-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Roman Kagan <rkagan@mail.ru>
Since e71d1378 (remote-hg: fix 'shared path' path, 2013-12-07),
Mercurial 'shared_path' file is correctly updated whenever a clone is
moved. Make sure it keeps working, especially as this is depending on a
private Mercurial file.
Signed-off-by: Antoine Pelisse <apelisse@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allow gitweb to be configured to show refs out of refs/heads/ as if
they were branches.
* kn/gitweb-extra-branch-refs:
gitweb: Denote non-heads, non-remotes branches
gitweb: Add a feature for adding more branch refs
gitweb: Return 1 on validation success instead of passed input
gitweb: Move check-ref-format code into separate function
Be more careful when parsing remote repository URL given in the
scp-style host:path notation.
* tb/clone-ssh-with-colon-for-port:
git_connect(): use common return point
connect.c: refactor url parsing
git_connect(): refactor the port handling for ssh
git fetch: support host:/~repo
t5500: add test cases for diag-url
git fetch-pack: add --diag-url
git_connect: factor out discovery of the protocol and its parts
git_connect: remove artificial limit of a remote command
t5601: add tests for ssh
t5601: remove clear_ssh, refactor setup_ssh_wrapper
Remove a few duplicate implementations of prefix/suffix comparison
functions, and rename them to starts_with and ends_with.
* cc/starts-n-ends-with:
replace {pre,suf}fixcmp() with {starts,ends}_with()
strbuf: introduce starts_with() and ends_with()
builtin/remote: remove postfixcmp() and use suffixcmp() instead
environment: normalize use of prefixcmp() by removing " != 0"
"git commit -v" appends the patch to the log message before
editing, and then removes the patch when the editor returned
control. However, the patch was not stripped correctly when the
first modified path was a submodule.
* jl/commit-v-strip-marker:
commit -v: strip diffs and submodule shortlogs from the commit message
SSL-related options were not passed correctly to underlying socket
layer in "git send-email".
* tr/send-email-ssl:
send-email: set SSL options through IO::Socket::SSL::set_client_defaults
send-email: --smtp-ssl-cert-path takes an argument
send-email: pass Debug to Net::SMTP::SSL::new
Merge branch 'jh/loose-object-dirs-creation-race' into maint
Two processes creating loose objects at the same time could have
failed unnecessarily when the name of their new objects started
with the same byte value, due to a race condition.
* jh/loose-object-dirs-creation-race:
sha1_file.c:create_tmpfile(): Fix race when creating loose object dirs
Merge branch 'jk/two-way-merge-corner-case-fix' into maint
"git am --abort" sometimes complained about not being able to write
a tree with an 0{40} object in it.
* jk/two-way-merge-corner-case-fix:
t1005: add test for "read-tree --reset -u A B"
t1005: reindent
unpack-trees: fix "read-tree -u --reset A B" with conflicted index
cmd_repack(): remove redundant local variable "nr_packs"
Its value is the same as the number of entries in the "names"
string_list, so just use "names.nr" in its place.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu> Acked-by: Stefan Beller <stefanbeller@googlemail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Avoid some nesting in builtin/diff.c, to make the code easier to read.
There are no functional changes.
Helped-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
diff: add test for --no-index executed outside repo
470faf9 diff: move no-index detection to builtin/diff.c breaks the error
message for "git diff --no-index", when the command is executed outside
of a git repository and the wrong number of arguments are given. 6df5762
diff: don't read index when --no-index is given fixes the problem.
Add a test to guard against similar breakages in the future.
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
After 1190a1a (pack-objects: name pack files after trailer hash,
2013-12-05), the SHA-1 used to determine the filename is calculated
differently. Update the documentation to not guarantee anything more
than that the SHA-1 depends on the pack content somehow.
Hopefully this will discourage readers from depending on the old or
the new calculation.
Reported-by: Michael Haggerty <mhagger@alum.mit.edu> Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
contrib/git-credential-gnome-keyring.c: small stylistic cleanups
Signed-off-by: John Szakmeister <john@szakmeister.net> Signed-off-by: Junio C Hamano <gitster@pobox.com> Reviewed-by: Felipe Contreras <felipe.contreras@gmail.com>
* jn/scripts-updates:
remove #!interpreter line from shell libraries
test: replace shebangs with descriptions in shell libraries
test: make FILEMODE a lazy prereq
contrib: remove git-p4import
mark contributed hooks executable
mark perl test scripts executable
mark Windows build scripts executable
* tr/commit-slab-cleanup:
commit-slab: sizeof() the right type in xrealloc
commit-slab: declare functions "static inline"
commit-slab: document clear_$slabname()
The "--tags" option to "git fetch" used to be literally a synonym to
a "refs/tags/*:refs/tags/*" refspec, which meant that (1) as an
explicit refspec given from the command line, it silenced the lazy
"git fetch" default that is configured, and (2) also as an explicit
refspec given from the command line, it interacted with "--prune"
to remove any tag that the remote we are fetching from does not
have.
This demotes it to an option; with it, we fetch all tags in
addition to what would be fetched without the option, and it does
not interact with the decision "--prune" makes to see what
remote-tracking refs the local has are missing the remote
counterpart.
* mh/fetch-tags-in-addition-to-normal-refs: (23 commits)
fetch: improve the error messages emitted for conflicting refspecs
handle_duplicate(): mark error message for translation
ref_remote_duplicates(): extract a function handle_duplicate()
ref_remove_duplicates(): simplify loop logic
t5536: new test of refspec conflicts when fetching
ref_remove_duplicates(): avoid redundant bisection
git-fetch.txt: improve description of tag auto-following
fetch-options.txt: simplify ifdef/ifndef/endif usage
fetch, remote: properly convey --no-prune options to subprocesses
builtin/remote.c:update(): use struct argv_array
builtin/remote.c: reorder function definitions
query_refspecs(): move some constants out of the loop
fetch --prune: prune only based on explicit refspecs
fetch --tags: fetch tags *in addition to* other stuff
fetch: only opportunistically update references based on command line
get_expanded_map(): avoid memory leak
get_expanded_map(): add docstring
builtin/fetch.c: reorder function definitions
get_ref_map(): rename local variables
api-remote.txt: correct section "struct refspec"
...
Given two branches residing in refs/heads/master and refs/wip/feature
the list-of-branches view will present them in following way:
master
feature (wip)
When getting a snapshot of a 'feature' branch, the tarball is going to
have name like 'project-wip-feature-<short hash>.tgz'.
Signed-off-by: Krzesimir Nowak <krzesimir@endocode.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
gitweb: Return 1 on validation success instead of passed input
Users of validate_* passing "0" might get failures on correct name
because of coercion of "0" to false in code like:
die_error(500, "invalid ref") unless (check_ref_format ("0"));
Also, the validate_foo subs are renamed to is_valid_foo.
Signed-off-by: Krzesimir Nowak <krzesimir@endocode.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
git diff --no-index ... currently reads the index, during setup, when
calling gitmodules_config(). This results in worse performance when the
index is not actually needed. This patch avoids calling
gitmodules_config() when the --no-index option is given. The times for
executing "git diff --no-index" in the WebKit repository are improved as
follows:
Test HEAD~3 HEAD
------------------------------------------------------------------
4001.1: diff --no-index 0.24(0.15+0.09) 0.01(0.00+0.00) -95.8%
An additional improvement of this patch is that "git diff --no-index" no
longer breaks when the index file is corrupt, which makes it possible to
use it for investigating the broken repository.
To improve the possible usage as investigation tool for broken
repositories, setup_git_directory_gently() is also not called when the
--no-index option is given.
Also add a test to guard against future breakages, and a performance
test to show the improvements.
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently the --no-index option is parsed in diff_no_index(). Move the
detection if a no-index diff should be executed to builtin/diff.c, where
we can use it for executing diff_no_index() conditionally. This will
also allow us to execute other operations conditionally, which will be
done in the next patch.
There are no functional changes.
Helped-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
cat-file: handle --batch format with missing type/size
Commit 98e2092 taught cat-file to stream blobs with --batch,
which requires that we look up the object type before
loading it into memory. As a result, we now print the
object header from information in sha1_object_info, and the
actual contents from the read_sha1_file. We double-check
that the information we printed in the header matches the
content we are about to show.
Later, commit 93d2a60 allowed custom header lines for
--batch, and commit 5b08640 made type lookups optional. As a
result, specifying a header line without the type or size
means that we will not look up those items at all.
This causes our double-checking to erroneously die with an
error; we think the type or size has changed, when in fact
it was simply left at "0".
For the size, we can fix this by only doing the consistency
double-check when we have retrieved the size via
sha1_object_info. In the case that we have not retrieved the
value, that means we also did not print it, so there is
nothing for us to check that we are consistent with.
We could do the same for the type. However, besides our
consistency check, we also care about the type in deciding
whether to stream or not. So instead of handling the case
where we do not know the type, this patch instead makes sure
that we always trigger a type lookup when we are printing,
so that even a format without the type will stream as we
would in the normal case.
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
We currently individually pass the sha1, type, and size
fields calculated by sha1_object_info. However, if we pass
the whole struct, the called function can make more
intelligent decisions about which fields were actually
filled by sha1_object_info.
This patch takes that first refactoring step, passing the
whole struct, so further patches can make those decisions
with less noise in their diffs. There should be no
functional change to this patch (aside from a minor typo fix
in the error message).
As a side effect, we can rename the local variables in the
function to "type" and "size", since the names are no longer
taken.
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
rebase: use reflog to find common base with upstream
Commit 15a147e (rebase: use @{upstream} if no upstream specified,
2011-02-09) says:
Make it default to 'git rebase @{upstream}'. That is also what
'git pull [--rebase]' defaults to, so it only makes sense that
'git rebase' defaults to the same thing.
but that isn't actually the case. Since commit d44e712 (pull: support
rebased upstream + fetch + pull --rebase, 2009-07-19), pull has actually
chosen the most recent reflog entry which is an ancestor of the current
branch if it can find one.
Add a '--fork-point' argument to git-rebase that can be used to trigger
this behaviour. This option is turned on by default if no non-option
arguments are specified on the command line, otherwise we treat an
upstream specified on the command-line literally.
Signed-off-by: John Keeping <john@keeping.me.uk> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* git://repo.or.cz/git-gui:
git-gui: correct spelling errors in comments
git-gui: add menu item to launch a bash shell on Windows.
git-gui: corrected setup of git worktree under cygwin.
git-gui: right half window is paned
git-gui: Add gui.displayuntracked option
git-gui: show the maxrecentrepo config option in the preferences dialog
git-gui: added gui.maxrecentrepo to extend the number of remembered repos
git-gui: Improve font rendering on retina macbooks
* git://ozlabs.org/~paulus/gitk:
gitk: Recognize -L option
gitk: Support showing the gathered inline diffs
gitk: Split out diff part in $commitinfo
gitk: Refactor per-line part of getblobdiffline and its support
gitk: Support -G option from the command line
gitk: Tag display improvements
Use only one return point from git_connect(), doing the
free();
return conn;
only at one place in the code.
There may be a little confusion what the variable "host" is for. At
some places it is only the host part, at other places it may include
the port number, so change host into hostandport here.
Signed-off-by: Torsten Bögershausen <tboegi@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make the function is_local() in transport.c public, rename it into
url_is_local_not_ssh() and use it in both transport.c and connect.c
Use a protocol "local" for URLs for the local file system.
One note about using file:// under Windows:
The (absolute) path on Unix like system typically starts with "/".
When the host is empty, it can be omitted, so that a shell scriptlet
url=file://$pwd
will give a URL like "file:///home/user/repo".
Windows does not have the same concept of a root directory located in "/".
When parsing the URL allow "file://C:/user/repo"
(even if RFC1738 indicates that "file:///C:/user/repo" should be used).
Signed-off-by: Torsten Bögershausen <tboegi@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use get_host_and_port() even for ssh.
Remove the variable port git_connect(), and simplify parse_connect_url()
Use only one return point in git_connect(), doing the free() and return conn.
t5601 had 2 corner test cases which now pass.
Signed-off-by: Torsten Bögershausen <tboegi@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
"ssh://host:/~repo",
"host:/~repo" or
"host:~repo"
specify the repository "repo" in the home directory at "host".
This has not been working for "host:/~repo".
Before commit 356bec "Support [address] in URLs", the comparison
"url != hostname" could be used to determine if the URL had a scheme
or not: "ssh://host/host" != "host".
However, after 356bec "[::1]" was converted into "::1", yielding
url != hostname as well. To fix this regression, don't use
"if (url != hostname)", but look at the separator instead.
Rename the variable "c" into "separator" to make it easier to read.
Signed-off-by: Torsten Bögershausen <tboegi@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
- parse out host and path for URLs with a scheme (git:// file:// ssh://)
- parse host names embedded by [] correctly
- extract the port number, if present
- separate URLs like "file" (which are local)
from URLs like "host:repo" which should use ssh
Signed-off-by: Torsten Bögershausen <tboegi@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The main purpose is to trace the URL parser called by git_connect() in
connect.c
The main features of the parser can be listed as this:
- parse out host and path for URLs with a scheme (git:// file:// ssh://)
- parse host names embedded by [] correctly
- extract the port number, if present
- separate URLs like "file" (which are local)
from URLs like "host:repo" which should use ssh
Add the new parameter "--diag-url" to "git fetch-pack", which prints
the value for protocol, host and path to stderr and exits.
Signed-off-by: Torsten Bögershausen <tboegi@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
git_connect: factor out discovery of the protocol and its parts
git_connect has grown large due to the many different protocols syntaxes
that are supported. Move the part of the function that parses the URL to
connect to into a separate function for readability.
Signed-off-by: Johannes Sixt <j6t@kdbg.org> Signed-off-by: Torsten Bögershausen <tboegi@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
git_connect: remove artificial limit of a remote command
Since day one, function git_connect() had a limit on the command line of
the command that is invoked to make a connection. 7a33bcbe converted the
code that constructs the command to strbuf. This would have been the
right time to remove the limit, but it did not happen. Remove it now.
git_connect() uses start_command() to invoke the command; consequently,
the limits of the system still apply, but are diagnosed only at execve()
time. But these limits are more lenient than the 1K that git_connect()
imposed.
Signed-off-by: Johannes Sixt <j6t@kdbg.org> Signed-off-by: Torsten Bögershausen <tboegi@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
When rev-parse looks at whether an argument like "foo..bar" or
"foobar^@" is a difference or parent-shorthand, it internally
munges the arguments so that it can pass the individual rev
arguments to get_sha1(). However, we do not consistently un-munge
the result.
For cases where we do not match (e.g., "doesnotexist..HEAD"), we
would then want to try to treat the argument as a filename.
try_difference gets() this right, and always unmunges in this case.
However, try_parent_shorthand() never unmunges, leading to incorrect
error messages, or even incorrect results:
$ git rev-parse foobar^@
foobar
fatal: ambiguous argument 'foobar': unknown revision or path not in the working tree.
Use '--' to separate paths from revisions, like this:
'git <command> [<revision>...] -- [<file>...]'
$ >foobar
$ git rev-parse foobar^@
foobar
For cases where we do match, neither function unmunges. This does
not currently matter, since we are done with the argument. However,
a future patch will do further processing, and this prepares for
it. In addition, it's simply a confusing interface for some cases to
modify the const argument, and others not to.
Signed-off-by: Jeff King <peff@peff.net> Reviewed-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 66713ef (pull: allow pull to preserve merges when rebasing)
didn't include an update so 'git remote status' parses branch.<name>.rebase=preserve
correctly, let's do that.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Oftentimes people will make the same change in two branches, revert the change
in one branch, and then be surprised when a merge reinstitutes that change when
the branches are merged. Add an explanatory paragraph that explains that this
occurs and the reason why, so people are not surprised.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the repository is moved, the absolute path of the shared repository
would fail.
Make sure it's always up-to-date.
Reported-by: Michael Davis <mjmdavis@gmail.com> Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Suggested-by: Roman Ovchinnikov <coolthecold@gmail.com> Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
pull: use merge-base --fork-point when appropriate
Since commit d96855f (merge-base: teach "--fork-point" mode, 2013-10-23)
we can replace a shell loop in git-pull with a single call to
git-merge-base. So let's do so.
Signed-off-by: John Keeping <john@keeping.me.uk> Signed-off-by: Junio C Hamano <gitster@pobox.com>
After a86a8b9 (sb/parseopt-boolean-removal), the deprecated
OPT_BOOLEAN is not used anywhere except by OPT__* macros. Kill
OPT_BOOLEAN and make OPT__* use OPT_COUNTUP directly instead. This
should stop OPT_BOOLEAN from entering the tree again in new patches.
OPT__DRY_RUN() is converted to use OPT_BOOL though because it does not
make sense to increase the level of dryness. All OPT__DRY_RUN call
sites have been checked and they look safe for OPT_BOOL.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Reviewed-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
rev-parse: correctly diagnose revision errors before "--"
Rev-parse understands that a "--" may separate revisions and
filenames, and that anything after the "--" is taken as-is.
However, it does not understand that anything before the
token must be a revision (which is the usual rule
implemented by the setup_revisions parser).
Since rev-parse prefers revisions to files when parsing
before the "--", we end up with the correct result (if such
an argument is a revision, we parse it as one, and if it is
not, it is an error either way). However, we misdiagnose
the errors:
$ git rev-parse foobar -- >/dev/null
fatal: ambiguous argument 'foobar': unknown revision or path not in the working tree.
Use '--' to separate paths from revisions, like this:
'git <command> [<revision>...] -- [<file>...]'
$ >foobar
$ git rev-parse foobar -- >/dev/null
fatal: bad flag '--' used after filename
In both cases, we should know that the real error is that
"foobar" is meant to be a revision, but could not be
resolved.
Signed-off-by: Jeff King <peff@peff.net> Reviewed-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
difftool: display the number of files in the diff queue in the prompt
When --prompt option is set, git-difftool displays a prompt for each
modified file to be viewed in an external diff program. At that
point, it could be useful to display a counter and the total number
of files in the diff queue.
Below is the current difftool prompt for the first of 5 modified files:
Viewing: 'diff.c'
Launch 'vimdiff' [Y/n]:
Consider the modified prompt:
Viewing (1/5): 'diff.c'
Launch 'vimdiff' [Y/n]:
The current GIT_EXTERNAL_DIFF mechanism does not tell the number of
paths in the diff queue nor the current counter. To make this
"counter/total" info available for GIT_EXTERNAL_DIFF programs
without breaking existing ones by doing the following:
- Keep track of the number of paths shown so far in diff_options;
- Export two new environment variables from run_external_diff() to
show the total number of paths (from diff_queue_struct) and the
current value of the counter (from diff_options); and
- Update git-difftool--helper to use these two environment variables.
Signed-off-by: Zoltan Klinger <zoltan.klinger@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
clone,fetch: catch non positive --depth option value
Instead of simply ignoring the value passed to --depth option when
it is zero or negative, catch and report it as an error to let
people know that they were using the option incorrectly.
Original-patch-by: Andrés G. Aragoneses <knocte@gmail.com> Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
config: arbitrary number of matches for --unset and --replace-all
git-config used a static match array to hold the matches we want to
unset/replace when using --unset or --replace-all. Use a
variable-sized array instead.
This in particular fixes the symptoms git-svn had when storing large
numbers of svn-remote.*.added-placeholder entries in the config file.
While the tests are rather more paranoid than just --unset and
--replace-all, the other operations already worked. Indeed git-svn's
usage only breaks the first time *after* creating so many entries,
when it wants to unset and re-add them all.
Reported-by: Jess Hottenstein <jess.hottenstein@gmail.com> Signed-off-by: Thomas Rast <tr@thomasrast.ch> Signed-off-by: Junio C Hamano <gitster@pobox.com>