This patch tries (but no too hard) to fit gitweb source in 80 columns,
for 2 columns wide tabs, and indent and align source for better
readibility.
While at it added comment to 'snapshot' entry defaults for %feature
hash, corrected "blobl" action in git_blame2 and git_blame to "blob",
key of argument to $cgi->a from 'class' to '-class'.
Signed-off-by: Jakub Narebski <jnareb@gmail.com> Signed-off-by: Junio C Hamano <junkio@cox.net>
"a.list" being "bold", makes a myriad of things shown by
gitweb in bold font-weight, which is a regression from
pre-17d07443188909ef5f8b8c24043cb6d9fef51bca behavior.
The fix is to add "subject" class and use this class
to replace pre-format_subject_html formatting of subject
(comment) via using (or not) <b>...</b> element. This
should go back to the pre-17d0744318... style.
Regression noticed by Luben Tuikov.
Signed-off-by: Jakub Narebski <jnareb@gmail.com> Signed-off-by: Luben Tuikov <ltuikov@yahoo.com> Signed-off-by: Junio C Hamano <junkio@cox.net>
Verify we know how to read a pack before trying to using it.
If the pack format were to ever change or be extended in the future
there is no assurance that just because the pack file lives in
objects/pack and doesn't end in .idx that we can read and decompress
its contents properly.
If we encounter what we think is a pack file and it isn't or we don't
recognize its version then die and suggest to the user that they
upgrade to a newer version of GIT which can handle that pack file.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
The little helper write_or_die() won't come back with bad news about
full disks or broken pipes. It either succeeds or terminates the
program, making additional error handling unnecessary.
This patch adds the new function and uses it to replace two similar
ones (the one in tar-tree originally has been copied from cat-file
btw.). I chose to add the fd parameter which both lacked to make
write_or_die() just as flexible as write() and thus suitable for
lib-ification.
There is a regression: error messages emitted by this function don't
show the program name, while the replaced two functions did. That's
acceptable, I think; a lot of other functions do the same.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx> Signed-off-by: Junio C Hamano <junkio@cox.net>
In the name of Standardization, this cleanses the last usage string of
mystical creatures. But they still dwell deep within the source and in
some debug messages, it is said.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx> Signed-off-by: Junio C Hamano <junkio@cox.net>
gitweb: Use parse_difftree_raw_line in git_difftree_body
Use newly introduced parse_difftree_raw_line function in the
git_difftree_body subroutine. While at it correct error in
parse_difftree_raw_line (unquote is unprototyped function), and
add comment explaining this function.
It also refactors git_difftree_body somewhat, and tries to fit
it in 80 columns.
Signed-off-by: Jakub Narebski <jnareb@gmail.com> Signed-off-by: Junio C Hamano <junkio@cox.net>
This adds blame and snapshot to the feature associative array. This
also helps in enabling or disabling these features via GITWEB_CONFIG
and overriding if allowed via project specfic config.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@gmail.com> Signed-off-by: Junio C Hamano <junkio@cox.net>
[jc: when I applied the patch I misread RFC 2616 which mildly
recommended against using the name "gzip", which was there only
for a historical reason. This fixes the mistake up and uses
the content-encoding "x-gzip" again.]
gitweb: bugfix: git_print_page_path() needs the hash base
If a file F exists in branch B, but doesn't exist
in master branch, then blob_plain needs the hash base in
order to properly get the file. The hash base is passed
on symbolically so we still preserve the "latest" quality
of the link presented by git_print_page_path().
Signed-off-by: Luben Tuikov <ltuikov@yahoo.com> Signed-off-by: Junio C Hamano <junkio@cox.net>
This adds snapshort support in gitweb. To enable one need to
set gitweb.snapshot = true in the config file. Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@hp.com> Signed-off-by: Junio C Hamano <junkio@cox.net>
Separate pretty-printing commit message (comment) into git_print_log
and git_print_simplified_log subroutines. As of now the former is used
in git_commit, the latter in git_log and git_commitdiff.
Signed-off-by: Jakub Narebski <jnareb@gmail.com> Signed-off-by: Junio C Hamano <junkio@cox.net>
The project list now uses several common header / footer generation functions.
These functions only check for "defined $project", but when PATH_INFO just
contains a "/" (which is often generated by web servers), then this test
fails.
Now explicitly undef $project if there is none so that the tests in other
gitweb parts work again.
Signed-off-by: Martin Waitz <tali@admingilde.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
If the webserver is configured to use gitweb even for the root directory
of the site, then my_uri is empty which leads to a non-functional home
link. Fix that by defaulting to "/" in this case.
Signed-off-by: Martin Waitz <tali@admingilde.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
With the new flag "--reject", hunks that do not apply are sent to
the standard output, and the usable hunks are applied. The command
itself exits with non-zero status when this happens, so that the
user or wrapper can take notice and sort the remaining mess out.
This patch avoids problems if vc-git.el is installed and activated, but
the git executable is not available, for example
http://list-archive.xemacs.org/xemacs-beta/200608/msg00062.html
Signed-off-by: Ville Skyttä <scop@xemacs.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
* jc/racy:
Remove the "delay writing to avoid runtime penalty of racy-git avoidance"
Add check program "git-check-racy"
Documentation/technical/racy-git.txt
avoid nanosleep(2)
It is now possible for project to have individual clone/fetch URLs.
They are provided in new file 'cloneurl' added below project's
$GIT_DIR directory.
If there is no cloneurl file, concatenation of git base URLs with
project name is used.
This is merge of Jakub Narebski and David Rientjes
gitweb: Show project's git URL on summary page
with Aneesh Kumar
gitweb: Add support for cloneurl.
gitweb: Support multiple clone urls
patches.
Signed-off-by: Jakub Narebski <jnareb@gmail.com> Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@gmail.com> Signed-off-by: Junio C Hamano <junkio@cox.net>
Use the href() function instead of string concatenation to generate
most URLs to our own CGI.
This is a work in progress, not everything has been converted yet.
Signed-off-by: Martin Waitz <tali@admingilde.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
gitweb: provide function to format the URL for an action link.
Provide a new function which can be used to generate an URL for the CGI.
This makes it possible to consolidate the URL generation in order to make
it easier to change the encoding of actions into URLs.
Signed-off-by: Martin Waitz <tali@admingilde.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
* maint:
finish_connect(): thinkofix
git-mv: succeed even if source is a prefix of destination
Solaris does not support C99 format strings before version 10
All but one callers have ignore the return value from this
function, but the only caller, builtin-tar-tree.c::remote_tar(),
assumed it returns non-zero on failure and zero on success. The
implementation however was returning either the waited pid
(which must be the same as its input) or -1 (an error).
Fix this thinko, while getting rid of an assignment of return
value from waitpid() into a variable of type int.
On Solaris nanosleep(2) is not available in libc; you need to
link with -lrt to get it.
The purpose of the loop is to wait until the next filesystem
timestamp granularity, and the code uses subsecond sleep in the
hope that it can shorten the delay to 0.5 seconds on average
instead of a full second. It is probably not worth depending on
an extra library for this.
We might want to yank out the whole "racy-git avoidance is
costly later at runtime, so let's delay writing the index out"
codepath later, but that is a separate issue and needs some
testing on large trees to figure it out. After playing with the
kernel tree, I have a feeling that the whole thing may not be
worth it.
git-apply --binary: clean up and prepare for --reverse
This cleans up the implementation of "git-apply --binary", and
implements reverse application of binary patches (when git-diff
is converted to emit reversible binary patches).
Earlier, the types of encoding (either deflated literal or
deflated delta) were stored in is_binary field in struct patch,
which meant that we cannot store more than one fragment that
differ in the encoding for a patch. This moves the information
to a field in struct fragment that is otherwise unused for
binary patches, and makes it possible to hang two (or more, but
two is enough) hunks for a binary patch.
The original "binary patch" output from git-diff is internally
parsed into an "is_binary" patch with one fragment. Upcoming
reversible binary patch output will have two fragments, the
first one being the forward patch and the second one the reverse
patch.
On Solaris and the BSDs the definition of "struct sockaddr_storage"
is not available from "netinet/in.h". On Solaris "sys/socket.h" is
enough, at least OpenBSD needs "sys/types.h", too.
Using "sys/types.h" and "sys/socket.h" seems to be a more portable
way.
Signed-off-by: Dennis Stosberg <dennis@stosberg.net> Signed-off-by: Junio C Hamano <junkio@cox.net>
I've always found difficult to figure out git URL for clone from
gitweb URL because git:// and http:// are different on many site
including kernel.org.
I've found this enhancement at http://dev.laptop.org/git when I was on
git channel, and thought that it'd be nice if all public gitweb site
show it's git URL on its page.
This patch allow us to change the home link string. The current
default is "projects" as we all see on gitweb now.
ie. kernel.org might set this variable to "git://git.kernel.org/pub/scm/"
Signed-off-by: Yasushi SHOJI <yashi@atmark-techno.com> Signed-off-by: Junio C Hamano <junkio@cox.net>
gitweb: Separate printing difftree in git_commit into git_difftree_body
Separate printing difftree in git_commit into separate
git_difftree_body subroutine. Add support for "C" (copied) status. For
"M" and "C" add parameter 'fp' (filename parent) to the "diff" link;
currently not supported by git_blobdiff ("blobdiff" action).
Reindented, realigned, added comments.
Signed-off-by: Jakub Narebski <jnareb@gmail.com> Signed-off-by: Junio C Hamano <junkio@cox.net>
gitweb: Change appereance of marker of refs pointing to given object
Change git_get_references to include type of ref in the %refs value, which
means putting everything after 'refs/' as a ref name, not only last
part of the name. Instead of separating refs pointing to the same
object by " / " separator, use anonymous array reference to store all
refs pointing to given object.
Use 'git-ls-remote .' if $projectroot/$project/info/refs does not
exist. (Perhaps it should be used always.)
Refs are now in separate span elements. Class is dependent on the ref
type: currently known classes are 'tag', 'head', 'remote', and 'ref'
(last one for HEAD and other refs in the main directory). There is
encompassing span element of class refs, just in case of unknown ref
type.
This might be considered cleaner separating of git_get_references into
filling %refs hash only, and not taking part in formatting ref marker.
Signed-off-by: Jakub Narebski <jnareb@gmail.com> Signed-off-by: Junio C Hamano <junkio@cox.net>
gitweb: Separate main part of git_history into git_history_body
Separates main part of git_history into git_history_body subroutine,
and makes output more similar to git_shortlog. Adds "diff to current"
link only for history of regular file (blob).
Signed-off-by: Jakub Narebski <jnareb@gmail.com> Signed-off-by: Junio C Hamano <junkio@cox.net>
gitweb: Separate ref parsing in git_get_refs_list into parse_ref
Note that for each ref there are usually two calls to git subroutines:
first to get the type of ref, second to parse ref if ref is of commit
or tag type.
Signed-off-by: Jakub Narebski <jnareb@gmail.com> Signed-off-by: Junio C Hamano <junkio@cox.net>
Rename some of subroutines to better reflect what they do.
Some renames were not performed because subroutine name
reflects hash key.
Subroutines name guideline:
* git_ prefix for subroutines related to git commands,
git repository, or to gitweb actions
* git_get_ prefix for inner subroutines calling git command
or reading some file in the repository and returning some output
* parse_ prefix for subroutines parsing some text (or reading and
parsing some text) into hash or list
* format_ prefix for subroutines formatting, post-processing
or generating some HTML/text fragment
* _get_ infix for subroutines which return result
* _print_ infix for subroutines which print fragment of output
* _body suffix for subroutines which outputs main part (body)
of related action (usually table)
* _nav suffix for subroutines related to navigation bars
* _div suffix for subroutines returning or printing div element
* subroutine names should not be based on how the result is obtained,
as this might change easily
Add a newline before appending "Signed-off-by: " line
Whef the last line of the commit log message does not end with
"^[-A-Za-z]+: [^@]+@", append a newline after it to separate
the body of the commit log message from the run of sign-off and
ack lines. e.g. "Signed-off-by: A U Thor <au.thor@example.com>" or
"Acked-by: Me <myself@example.org>".
sample commit-msg hook: no silent exit on duplicate Signed-off-by lines
git-commit would silently exit if duplicate Signed-off-by
lines were found. Users of git-commit would not know it,
unless they checked '$?'. This patch makes git-commit
actually print out a message that nothing was commited
since duplicate Signed-off-lines were found.
Signed-off-by: Luben Tuikov <ltuikov@yahoo.com> Signed-off-by: Junio C Hamano <junkio@cox.net>