* po/maint-docs:
Doc branch: show -vv option and alternative
Doc clean: add See Also link
Doc add: link gitignore
Doc: separate gitignore pattern sources
Doc: shallow clone deepens _to_ new depth
* jc/ll-merge-binary-ours:
ll-merge: warn about inability to merge binary files only when we can't
attr: "binary" attribute should choose built-in "binary" merge driver
merge: teach -Xours/-Xtheirs to binary ll-merge driver
When we create an http active_request_slot, we can set its
"results" pointer back to local storage. The http code will
fill in the details of how the request went, and we can
access those details even after the slot has been cleaned
up.
Commit 8809703 (http: factor out http error code handling)
switched us from accessing our local results struct directly
to accessing it via the "results" pointer of the slot. That
means we're accessing the slot after it has been marked as
finished, defeating the whole purpose of keeping the results
storage separate.
Most of the time this doesn't matter, as finishing the slot
does not actually clean up the pointer. However, when using
curl's multi interface with the dumb-http revision walker,
we might actually start a new request before handing control
back to the original caller. In that case, we may reuse the
slot, zeroing its results pointer, and leading the original
caller to segfault while looking for its results inside the
slot.
Instead, we need to pass a pointer to our local results
storage to the handle_curl_result function, rather than
relying on the pointer in the slot struct. This matches what
the original code did before the refactoring (which did not
use a separate function, and therefore just accessed the
results struct directly).
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
That sets up for later tests that fetch the branch and check that git
svn mangles the refname appropriately.
Unfortunately, modern svn versions interpret path arguments with an
@-sign as an example of path@revision syntax (which pegs a path to a
particular revision) and truncate the path or error out with message
"svn: E205000: Syntax error parsing peg revision '{0}reflog'".
When using subversion 1.6.x, escaping the @ sign as %40 avoids trouble
(see 08fd28bb, 2010-07-08). Newer versions are stricter:
The recommended method for escaping a literal @ sign in a path passed
to subversion is to add an empty peg revision at the end of the path
("branches/not-a@{0}reflog@"). Do that.
Pre-1.6.12 versions of Subversion probably treat the trailing @ as
another literal @-sign (svn issue 3651). Luckily ever since
v1.8.0-rc0~155^2~7 (t9118: workaround inconsistency between SVN
versions, 2012-07-28) the test can survive that.
Tested with Debian Subversion 1.6.12dfsg-6 and 1.7.5-1 and r1395837
of Subversion trunk (1.8.x).
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Tested-by: Michael J Gruber <git@drmicha.warpmail.net> Signed-off-by: Eric Wong <normalperson@yhbt.net>
git svn: work around SVN 1.7 mishandling of svn:special changes
Subversion represents symlinks as ordinary files with content starting
with "link " and the svn:special property set to "*". Thus a file can
switch between being a symlink and a non-symlink simply by toggling
its svn:special property, and new checkouts will automatically write a
file of the appropriate type. Likewise, in subversion 1.6 and older,
running "svn update" would notice changes in filetype and update the
working copy appropriately.
Starting in subversion 1.7 (issue 4091), changes to the svn:special
property trip an assertion instead:
$ svn up svn-tree
Updating 'svn-tree':
svn: E235000: In file 'subversion/libsvn_wc/update_editor.c' \
line 1583: assertion failed (action == svn_wc_conflict_action_edit \
|| action == svn_wc_conflict_action_delete || action == \
svn_wc_conflict_action_replace)
Revisions prepared with ordinary svn commands ("svn add" and not "svn
propset") don't trip this because they represent these filetype
changes using a replace operation, which is approximately equivalent
to removal followed by adding a new file and works fine. Follow suit.
Noticed using t9100. After this change, git-svn's file-to-symlink
changes are sent in a format that modern "svn update" can handle and
tests t9100.11-13 pass again.
[ew: s,git-svn\.perl,perl/Git/SVN/Editor.pm,g]
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Eric Wong <normalperson@yhbt.net>
MALLOC_CHECK: Allow checking to be disabled from config.mak
The malloc checks can be disabled using the TEST_NO_MALLOC_CHECK
variable, either from the environment or command line of an
'make test' invocation. In order to allow the malloc checks to be
disabled from the 'config.mak' file, we add TEST_NO_MALLOC_CHECK
to the environment using an export directive.
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk> Signed-off-by: Junio C Hamano <gitster@pobox.com>
40bfbde ("build: don't duplicate substitution of make variables",
2012-09-11) by mistake removed a necessary comma at the end of
"CC_LD_DYNPATH=-Wl,rpath," in line 414.
When executing "./configure --with-zlib=PATH", this resulted in
[...]
CC xdiff/xhistogram.o
AR xdiff/lib.a
LINK git-credential-store
/usr/bin/ld: bad -rpath option
collect2: ld returned 1 exit status
make: *** [git-credential-store] Error 1
$
during make.
Signed-off-by: Øyvind A. Holm <sunny@sunbase.org> Acked-by: Stefano Lattarini <stefano.lattarini@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
These tests just want a bit-for-bit identical copy; they do not need
even -H (there is no symbolic link involved) nor -p (there is no
funny permission or ownership issues involved).
Just use "cp -R" instead.
Signed-off-by: Ben Walton <bdwalton@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Git url doc: mark ftp/ftps as read-only and deprecate them
It is not even worth mentioning their removal; just discourage
people from using them.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com> Reviewed-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git fmt-merge-msg" (an internal helper reduce_heads() it uses) had
a severe performance regression; an empty "git pull" took forever to
finish as the result.
* jc/merge-bases-paint-fix:
paint_down_to_common(): parse commit before relying on its timestamp
Merge branch 'jk/receive-pack-unpack-error-to-pusher' into maint
"git receive-pack" (the counterpart to "git push") did not give
progress output while processing objects it received to the puser
when run over the smart-http protocol.
* jk/receive-pack-unpack-error-to-pusher:
receive-pack: drop "n/a" on unpacker errors
receive-pack: send pack-processing stderr over sideband
receive-pack: redirect unpack-objects stdout to /dev/null
A repository created with "git clone --single" had its fetch
refspecs set up just like a clone without "--single", leading the
subsequent "git fetch" to slurp all the other branches, defeating
the whole point of specifying "only this branch".
* rt/maint-clone-single:
clone --single: limit the fetch refspec to fetched branch
gitignore.txt: suggestions how to get literal # or ! at the beginning
We support backslash escape, but we hide the details behind the phrase
"a shell glob suitable for consumption by fnmatch(3)". So it may not
be obvious how one can get literal # or ! at the beginning of pattern.
Add a few lines on how to work around the magic characters.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-svn: keep leading slash when canonicalizing paths (fallback case)
Subversion's svn_dirent_canonicalize() and svn_path_canonicalize()
APIs keep a leading slash in the return value if one was present on
the argument, which can be useful since it allows relative and
absolute paths to be distinguished.
When git-svn's canonicalize_path() learned to use these functions if
available, its semantics changed in the corresponding way. Some new
callers rely on the leading slash --- for example, if the slash is
stripped out then _canonicalize_url_ourselves() will transform
"proto://host/path/to/resource" to "proto://hostpath/to/resource".
Unfortunately the fallback _canonicalize_path_ourselves(), used when
the appropriate SVN APIs are not usable, still follows the old
semantics, so if that code path is exercised then it breaks. Fix it
to follow the new convention.
Noticed by forcing the fallback on and running tests. Without this
patch, t9101.4 fails:
Bad URL passed to RA layer: Unable to open an ra_local session to \
URL: Local URL 'file://homejrnsrcgit-scratch/t/trash%20directory.\
t9101-git-svn-props/svnrepo' contains unsupported hostname at \
/home/jrn/src/git-scratch/perl/blib/lib/Git/SVN.pm line 148
With it, the git-svn tests pass again.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Eric Wong <normalperson@yhbt.net>
All users of $gs->{path} should have been converted to use the
accessor by now. Check our work by renaming the underlying variable
to break callers that try to use it directly.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Eric Wong <normalperson@yhbt.net>
When using the {word,[...]} style of configuration for tags and branches,
it appears the intent is to only match whole path parts, since the words
in the {} pattern are meta-character quoted.
When the pattern word appears in the beginning or middle of the url,
it's matched completely, since the left side, pattern, and (non-empty)
right side are joined together with path separators.
However, when the pattern word appears at the end of the URL, the
right side is an empty pattern, and the resulting regex matches
more than just the specified pattern.
For example, if you specify something along the lines of
branches = branches/project/{release_1,release_2}
and your repository also contains "branches/project/release_1_2", you
will also get the release_1_2 branch. By restricting the match regex
with anchors, this is avoided.
Signed-off-by: Ammon Riley <ammon.riley@gmail.com> Signed-off-by: Eric Wong <normalperson@yhbt.net>
git-svn.perl: keep processing all commits in parents_exclude
This fixes a bug where git finds the incorrect merge parent. Consider a
repository with trunk, branch1 of trunk, and branch2 of branch1.
Without this change, git interprets a merge of branch2 into trunk as a
merge of branch1 into trunk.
Signed-off-by: Steven Walter <stevenrwalter@gmail.com> Reviewed-by: Sam Vilain <sam@vilain.net> Signed-off-by: Eric Wong <normalperson@yhbt.net>
git-svn.perl: consider all ranges for a given merge, instead of only tip-by-tip
Consider the case where you have trunk, branch1 of trunk, and branch2 of
branch1. trunk is merged back into branch2, and then branch2 is
reintegrated into trunk. The merge of branch2 into trunk will have
svn:mergeinfo property references to both branch1 and branch2. When
git-svn fetches the commit that merges branch2 (check_cherry_pick),
it is necessary to eliminate the merged contents of branch1 as well as
branch2, or else the merge will be incorrectly ignored as a cherry-pick.
Signed-off-by: Steven Walter <stevenrwalter@gmail.com> Reviewed-by: Sam Vilain <sam@vilain.net> Signed-off-by: Eric Wong <normalperson@yhbt.net>
paint_down_to_common(): parse commit before relying on its timestamp
When refactoring the merge-base computation to reduce the pairwise
O(n*(n-1)) traversals to parallel O(n) traversals, the code forgot
that timestamp based heuristics needs each commit to have been
parsed. This caused an empty "git pull" to spend cycles, traversing
the history all the way down to 0 (because an unparsed commit object
has 0 timestamp, and any other commit object with positive timestamp
will be processed for its parents, all getting parsed), only to come
up with a merge message to be used.
Teach the commands from the "log" family the "--grep-reflog" option
to limit output by string that appears in the reflog entry when the
"--walk-reflogs" option is in effect.
* nd/grep-reflog:
revision: make --grep search in notes too if shown
log --grep-reflog: reject the option without -g
revision: add --grep-reflog to filter commits by reflog messages
grep: prepare for new header field filter
t1450: the order the objects are checked is undefined
When a tag T points at an object X that is of a type that is
different from what the tag records as, fsck should report it as an
error.
However, depending on the order X and T are checked individually,
the actual error message can be different. If X is checked first,
fsck remembers X's type and then when it checks T, it notices that T
records X as a wrong type (i.e. the complaint is about a broken tag
T). If T is checked first, on the other hand, fsck remembers that we
need to verify X is of the type tag records, and when it later
checks X, it notices that X is of a wrong type (i.e. the complaint
is about a broken object X).
The important thing is that fsck notices such an error and diagnoses
the issue on object X, but the test was expecting that we happen to
check objects in the order to make us detect issues with tag T, not
with object X. Remove this unwarranted assumption.
Merge branch 'rr/maint-submodule-unknown-cmd' into maint
"git submodule frotz" was not diagnosed as "frotz" being an unknown
subcommand to "git submodule"; the user instead got a complaint that
"git submodule status" was run with an unknown path "frotz".
* rr/maint-submodule-unknown-cmd:
submodule: if $command was not matched, don't parse other args
Merge branch 'sp/maint-http-enable-gzip' into maint
"git fetch" over http advertised that it supports "deflate", which
is much less common, and did not advertise more common "gzip" on its
Accept-Encoding header.
* sp/maint-http-enable-gzip:
Enable info/refs gzip decompression in HTTP client
Merge branch 'sp/maint-http-info-refs-no-retry' into maint
"git fetch" over http had an old workaround for an unlikely server
misconfiguration; it turns out that this hurts debuggability of the
configuration in general, and has been reverted.
* sp/maint-http-info-refs-no-retry:
Revert "retry request without query when info/refs?query fails"
Documentation: mention `push.default` in git-push.txt
It already is listed in the "git config" documentation, but people
interested in pushing would first look at "git push" documentation.
Noticed-by: David Glasser Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com> Acked-by: Matthieu Moy <Matthieu.Moy@grenoble-inp.fr> Fixed-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The actual external command to run for mergetool backend can be
specified with difftool/mergetool.$name.cmd configuration
variables, but this mechanism was ignored for the backends we
natively support.
* da/mergetool-custom:
mergetool--lib: Allow custom commands to override built-ins
Send errors from "unpack-objects" and "index-pack" back to the "git
push" over the git and smart-http protocols, just like it is done
for a push over the ssh protocol.
* jk/receive-pack-unpack-error-to-pusher:
receive-pack: drop "n/a" on unpacker errors
receive-pack: send pack-processing stderr over sideband
receive-pack: redirect unpack-objects stdout to /dev/null
mailinfo: don't require "text" mime type for attachments
Currently "git am" does insane things if the mbox it is given contains
attachments with a MIME type that aren't "text/*".
In particular, it will still decode them, and pass them "one line at a
time" to the mail body filter, but because it has determined that they
aren't text (without actually looking at the contents, just at the mime
type) the "line" will be the encoding line (eg 'base64') rather than a
line of *content*.
Which then will cause the text filtering to fail, because we won't
correctly notice when the attachment text switches from the commit message
to the actual patch. Resulting in a patch failure, even if patch may be a
perfectly well-formed attachment, it's just that the message type may be
(for example) "application/octet-stream" instead of "text/plain".
Just remove all the bogus games with the message_type. The only difference
that code creates is how the data is passed to the filter function
(chunked per-pred-code line or per post-decode line), and that difference
is *wrong*, since chunking things per pre-decode line can never be a
sensible operation, and cannot possibly matter for binary data anyway.
This code goes all the way back to March of 2007, in commit 87ab79923463
("builtin-mailinfo.c infrastrcture changes"), and apparently Don used to
pass random mbox contents to git. However, the pre-decode vs post-decode
logic really shouldn't matter even for that case, and more importantly, "I
fed git am crap" is not a valid reason to break *real* patch attachments.
If somebody really cares, and determines that some attachment is binary
data (by looking at the data, not the MIME-type), the whole attachment
should be dismissed, rather than fed in random-sized chunks to
"handle_filter()".
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Don Zickus <dzickus@redhat.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Merge branch 'maint' of git://github.com/git-l10n/git-po into maint
Update German and Simplified Chinese translations.
* 'maint' of git://github.com/git-l10n/git-po:
l10n: de.po: correct translation of a 'rebase' message
l10n: Improve many translation for zh_CN
l10n: Unify the translation for '(un)expected'
Merge branch 'jc/maint-log-grep-all-match-1' into maint
* jc/maint-log-grep-all-match-1:
grep.c: make two symbols really file-scope static this time
t7810-grep: test --all-match with multiple --grep and --author options
t7810-grep: test interaction of multiple --grep and --author options
t7810-grep: test multiple --author with --all-match
t7810-grep: test multiple --grep with and without --all-match
t7810-grep: bring log --grep tests in common form
grep.c: mark private file-scope symbols as static
log: document use of multiple commit limiting options
log --grep/--author: honor --all-match honored for multiple --grep patterns
grep: show --debug output only once
grep: teach --debug option to dump the parse tree
Teach an option to edit the insn sheet to "git rebase -i".
* aw/rebase-i-edit-todo:
rebase -i: suggest using --edit-todo to fix an unknown instruction
rebase -i: Add tests for "--edit-todo"
rebase -i: Teach "--edit-todo" action
rebase -i: Refactor help messages for todo file
rebase usage: subcommands can not be combined with -i
revision: make --grep search in notes too if shown
Notes are shown after commit body. From user perspective it looks
pretty much like commit body and they may assume --grep would search
in that part too.
Make it so.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>