Merge branch 'jk/make-fix-dependencies' into maint
Build clean-up.
* jk/make-fix-dependencies:
Makefile: silence perl/PM.stamp recipe
Makefile: avoid timestamp updates to GIT-BUILD-OPTIONS
Makefile: drop dependency between git-instaweb and gitweb
There was a dead code that used to handle "git pull --tags" and
show special-cased error message, which was made irrelevant when
the semantics of the option changed back in Git 1.9 days.
* pt/pull-tags-error-diag:
pull: remove --tags error in no merge candidates case
Merge branch 'jk/diagnose-config-mmap-failure' into maint
The configuration reader/writer uses mmap(2) interface to access
the files; when we find a directory, it barfed with "Out of memory?".
* jk/diagnose-config-mmap-failure:
xmmap(): drop "Out of memory?"
config.c: rewrite ENODEV into EISDIR when mmap fails
config.c: avoid xmmap error messages
config.c: fix mmap leak when writing config
read-cache.c: drop PROT_WRITE from mmap of index
Merge branch 'jk/squelch-missing-link-warning-for-unreachable' into maint
Recent "git prune" traverses young unreachable objects to safekeep
old objects in the reachability chain from them, which sometimes
caused error messages that are unnecessarily alarming.
* jk/squelch-missing-link-warning-for-unreachable:
suppress errors on missing UNINTERESTING links
silence broken link warnings with revs->ignore_missing_links
add quieter versions of parse_{tree,commit}
Merge branch 'mm/rebase-i-post-rewrite-exec' into maint
"git rebase -i" fired post-rewrite hook when it shouldn't (namely,
when it was told to stop sequencing with 'exec' insn).
* mm/rebase-i-post-rewrite-exec:
t5407: use <<- to align the expected output
rebase -i: fix post-rewrite hook with failed exec command
rebase -i: demonstrate incorrect behavior of post-rewrite
The improved ARRAY_SIZE macro uses BARF_UNLESS_AN_ARRAY which expands
to a valid check for recent gcc versions and to 0 for older gcc
versions but is not defined on non-gcc builds.
Non-gcc builds need this macro to expand to 0 as well. The current outer
test (defined(__GNUC__) && (__GNUC__ >= 3)) is a strictly weaker
condition than the inner test (GIT_GNUC_PREREQ(3, 1)) so we can omit the
outer test and cause the BARF_UNLESS_AN_ARRAY macro to be defined
correctly on non-gcc builds as well as gcc builds with older versions.
Signed-off-by: Charles Bailey <cbailey32@bloomberg.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
More Perforce row number limit workaround for "git p4".
* ld/p4-changes-block-size:
git-p4: fixing --changes-block-size handling
git-p4: add tests for non-numeric revision range
git-p4: test with limited p4 server results
git-p4: additional testing of --changes-block-size
"git for-each-ref" reported "missing object" for 0{40} when it
encounters a broken ref. The lack of object whose name is 0{40} is
not the problem; the ref being broken is.
* mh/reporting-broken-refs-from-for-each-ref:
read_loose_refs(): treat NULL_SHA1 loose references as broken
read_loose_refs(): simplify function logic
for-each-ref: report broken references correctly
t6301: new tests of for-each-ref error handling
Various fixes around "git am" that applies a patch to a history
that is not there yet.
* pt/am-abort-fix:
am --abort: keep unrelated commits on unborn branch
am --abort: support aborting to unborn branch
am --abort: revert changes introduced by failed 3way merge
am --skip: support skipping while on unborn branch
am -3: support 3way merge on unborn branch
am --skip: revert changes introduced by failed 3way merge
Traditionally, external low-level 3-way merge drivers are expected
to produce their results based solely on the contents of the three
variants given in temporary files named by %O, %A and %B on their
command line. Additionally allow them to look at the final path
(given by %P).
* jc/ll-merge-expose-path:
ll-merge: pass the original path to external drivers
"git apply" cannot diagnose a patch corruption when the breakage is
to mark the length of the hunk shorter than it really is on the
hunk header line "@@ -l,k +m,n @@"; one special case it could is
when the hunk becomes no-op (e.g. k == n == 2 for two-line context
patch output), and it learned how to do so.
* jc/apply-reject-noop-hunk:
apply: reject a hunk that does not do anything
It turns out that many other commands that need to interact with the
result of running diff-files and diff-index, e.g. "git apply", "git
rm", etc., need to be adjusted to the new world order it brings in.
For example, it would break this sequence to correct a whitespace
breakage in the parts you changed:
In the old world order, "diff" showed a patch to modify an existing
empty file by adding its full contents, and "apply" updated the
index by modifying the existing empty blob (which is what an
Intent-to-Add entry records in the index) with that patch.
In the new world order, "diff" shows a patch to create a new file
with its full contents, but because "apply" thinks that the i-t-a
entry already exists in the index, it refused to accept a creation.
Adjusting "apply" to this new world order is easy, but we need to
assess the extent of the damage to the rest of the system the new
world order brought in before going forward and adjust them all,
after which we can resurrect the commit being reverted here.
When no diff nor merge tool is specified (config, option), mergetool-lib
is supposed to choose a default tool from a set of tools. That set is
constructed dynamically depending on the environment (graphical, editor
setting) as a space separated string of tool names.
719518f (mergetool--lib: set IFS for difftool and mergetool, 2015-05-20)
introduced a newline as IFS which breaks the parsing of the space
separated list into items, resulting in a failed search for an available
tool.
Set IFS to a space locally for the tool search.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Merge branch 'jk/http-backend-deadlock' into maint
Communication between the HTTP server and http_backend process can
lead to a dead-lock when relaying a large ref negotiation request.
Diagnose the situation better, and mitigate it by reading such a
request first into core (to a reasonable limit).
* jk/http-backend-deadlock:
http-backend: spool ref negotiation requests to buffer
t5551: factor out tag creation
http-backend: fix die recursion with custom handler
Merge branch 'jh/filter-empty-contents' into maint
The clean/smudge interface did not work well when filtering an
empty contents (failed and then passed the empty input through).
It can be argued that a filter that produces anything but empty for
an empty input is nonsense, but if the user wants to do strange
things, then why not?
* jh/filter-empty-contents:
sha1_file: pass empty buffer to index empty file
* jk/make-fix-dependencies:
Makefile: silence perl/PM.stamp recipe
Makefile: avoid timestamp updates to GIT-BUILD-OPTIONS
Makefile: drop dependency between git-instaweb and gitweb
git describe does not show 'the most recent tag that is reachable from a
commit', but a descriptive name based on this tag. Fix the description to
reflect that.
Suggested-by: Albert Netymk <albertnetymk@gmail.com> Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr> Signed-off-by: Junio C Hamano <gitster@pobox.com>
That commit was an attempt to improve the safety of applying
a stash, because the application process may create
conflicted index entries, after which it is hard to restore
the original index state.
Unfortunately, this hurts some common workflows around "git
stash -k", like:
git add -p ;# (1) stage set of proposed changes
git stash -k ;# (2) get rid of everything else
make test ;# (3) make sure proposal is reasonable
git stash apply ;# (4) restore original working tree
If you "git commit" between steps (3) and (4), then this
just works. However, if these steps are part of a pre-commit
hook, you don't have that opportunity (you have to restore
the original state regardless of whether the tests passed or
failed).
It's possible that we could provide better tools for this
sort of workflow. In particular, even before ed178ef, it
could fail with a conflict if there were conflicting hunks
in the working tree and index (since the "stash -k" puts the
index version into the working tree, and we then attempt to
apply the differences between HEAD and the old working tree
on top of that). But the fact remains that people have been
using it happily for a while, and the safety provided by ed178ef is simply not that great. Let's revert it for now.
In the long run, people can work on improving stash for this
sort of workflow, but the safety tradeoff is not worth it in
the meantime.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
hooks/pre-auto-gc: adjust power checking for newer OS X
The output of "pmset -g batt" changed at some point from "Currently
drawing from 'AC Power'" to the slightly different "Now drawing from
'AC Power'". Starting the match from "drawing" makes the check work
in both old and new versions of OS X.
Signed-off-by: Panagiotis Astithas <pastith@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
l10n: de.po: change error message from "sagen" to "Meinten Sie"
We should not use "sagen" if someone has written something wrong.
Although it's "say" in English, we should not use it in German
and instead use our normal error message.
Recent "git prune" traverses young unreachable objects to safekeep
old objects in the reachability chain from them, which sometimes
caused error messages that are unnecessarily alarming.
* jk/squelch-missing-link-warning-for-unreachable:
suppress errors on missing UNINTERESTING links
silence broken link warnings with revs->ignore_missing_links
add quieter versions of parse_{tree,commit}
* pt/pull-tests:
t5520: check reflog action in fast-forward merge
t5521: test --dry-run does not make any changes
t5520: test --rebase failure on unborn branch with index
t5520: test --rebase with multiple branches
t5520: test work tree fast-forward when fetch updates head
t5520: test for failure if index has unresolved entries
t5520: test no merge candidates cases
t5520: prevent field splitting in content comparisons
The configuration reader/writer uses mmap(2) interface to access
the files; when we find a directory, it barfed with "Out of memory?".
* jk/diagnose-config-mmap-failure:
xmmap(): drop "Out of memory?"
config.c: rewrite ENODEV into EISDIR when mmap fails
config.c: avoid xmmap error messages
config.c: fix mmap leak when writing config
read-cache.c: drop PROT_WRITE from mmap of index
Bring consistency to error reporting mechanism used in "refs" API.
* mh/verify-lock-error-report:
ref_transaction_commit(): do not capitalize error messages
verify_lock(): do not capitalize error messages
verify_lock(): report errors via a strbuf
verify_lock(): on errors, let the caller unlock the lock
verify_lock(): return 0/-1 rather than struct ref_lock *
Allow whitespace breakages in deleted and context lines to be also
painted in the output.
* jc/diff-ws-error-highlight:
diff.c: --ws-error-highlight=<kind> option
diff.c: add emit_del_line() and emit_context_line()
t4015: separate common setup and per-test expectation
t4015: modernise style
The --changes-block-size handling was intended to help when
a user has a limited "maxscanrows" (see "p4 group"). It used
"p4 changes -m $maxchanges" to limit the number of results.
Unfortunately, it turns out that the "maxscanrows" and "maxresults"
limits are actually applied *before* the "-m maxchanges" parameter
is considered (experimentally).
Fix the block-size handling so that it gets blocks of changes
limited by revision number ($Start..$Start+$N, etc). This limits
the number of results early enough that both sets of tests pass.
Note that many other Perforce operations can fail for the same
reason (p4 print, p4 files, etc) and it's probably not possible
to workaround this. In the real world, this is probably not
usually a problem.
Signed-off-by: Luke Diamand <luke@diamand.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
index-pack: avoid excessive re-reading of pack directory
Since 45e8a74 (has_sha1_file: re-check pack directory before
giving up, 2013-08-30), we spend extra effort for
has_sha1_file to give the right answer when somebody else is
repacking. Usually this effort does not matter, because
after finding that the object does not exist, the next step
is usually to die().
However, some code paths make a large number of
has_sha1_file checks which are _not_ expected to return 1.
The collision test in index-pack.c is such a case. On a
local system, this can cause a performance slowdown of
around 5%. But on a system with high-latency system calls
(like NFS), it can be much worse.
This patch introduces a "quick" flag to has_sha1_file which
callers can use when they would prefer high performance at
the cost of false negatives during repacks. There may be
other code paths that can use this, but the index-pack one
is the most obviously critical, so we'll start with
switching that one.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
commit: cope with scissors lines in commit message
The diff and submodule shortlog appended to the commit message template
by 'git commit --verbose' are not stripped when the commit message
contains an indented scissors line.
When cleaning up a commit message with 'git commit --verbose' or
'--cleanup=scissors' the code is careful and triggers only on a pure
scissors line, i.e. a line containing nothing but a comment character, a
space, and the scissors cut. This is good, because people can embed
scissors lines in the commit message while using 'git commit --verbose',
and the text they write after their indented scissors line doesn't get
deleted.
While doing so, however, the cleanup function only looks at the first
line matching the scissors pattern and if it doesn't start at the
beginning of the line, then the function just returns without performing
any cleanup. This is wrong, because a "real" scissors line added by
'git commit --verbose' might follow, and in that case the diff and
submodule shortlog get included in the commit message.
Fix this by changing the scissors pattern to match only at the beginning
of the line, yet be careful to catch scissors on the first line as well.
Helped-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: SZEDER Gábor <szeder@ira.uka.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>