Partial clone support of "git clone" has been updated to correctly
validate the objects it receives from the other side. The server
side has been corrected to send objects that are directly
requested, even if they may match the filtering criteria (e.g. when
doing a "lazy blob" partial clone).
* jt/partial-clone-fsck-connectivity:
clone: check connectivity even if clone is partial
upload-pack: send refs' objects despite "filter"
The content-transfer-encoding of the message "git send-email" sends
out by default was 8bit, which can cause trouble when there is an
overlong line to bust RFC 5322/2822 limit. A new option 'auto' to
automatically switch to quoted-printable when there is such a line
in the payload has been introduced and is made the default.
* bc/send-email-auto-cte:
docs: correct RFC specifying email line length
send-email: automatically determine transfer-encoding
send-email: accept long lines with suitable transfer encoding
send-email: add an auto option for transfer encoding
The codebase has been updated to compile cleanly with -pedantic
option.
* bb/pedantic:
utf8.c: avoid char overflow
string-list.c: avoid conversion from void * to function pointer
sequencer.c: avoid empty statements at top level
convert.c: replace "\e" escapes with "\033".
fixup! refs/refs-internal.h: avoid forward declaration of an enum
refs/refs-internal.h: avoid forward declaration of an enum
fixup! connect.h: avoid forward declaration of an enum
connect.h: avoid forward declaration of an enum
"git fetch" failed to correctly validate the set of objects it
received when making a shallow history deeper, which has been
corrected.
* jt/connectivity-check-after-unshallow:
fetch-pack: write shallow, then check connectivity
fetch-pack: implement ref-in-want
fetch-pack: put shallow info in output parameter
fetch: refactor to make function args narrower
fetch: refactor fetch_refs into two functions
fetch: refactor the population of peer ref OIDs
upload-pack: test negotiation with changing repository
upload-pack: implement ref-in-want
test-pkt-line: add unpack-sideband subcommand
The "--ignore-case" option of "git for-each-ref" (and its friends)
did not work correctly, which has been fixed.
* jk/for-each-ref-icase:
ref-filter: avoid backend filtering with --ignore-case
for-each-ref: consistently pass WM_IGNORECASE flag
t6300: add a test for --ignore-case
"git rebase" behaved slightly differently depending on which one of
the three backends gets used; this has been documented and an
effort to make them more uniform has begun.
* en/rebase-consistency:
git-rebase: make --allow-empty-message the default
t3401: add directory rename testcases for rebase and am
git-rebase.txt: document behavioral differences between modes
directory-rename-detection.txt: technical docs on abilities and limitations
git-rebase.txt: address confusion between --no-ff vs --force-rebase
git-rebase: error out when incompatible options passed
t3422: new testcases for checking when incompatible options passed
git-rebase.sh: update help messages a bit
git-rebase.txt: document incompatible options
"git checkout --recurse-submodules another-branch" did not report
in which submodule it failed to update the working tree, which
resulted in an unhelpful error message.
* sb/submodule-move-head-error-msg:
submodule.c: report the submodule that an error occurs in
"fsck.skipList" did not prevent a blob object listed there from
being inspected for is contents (e.g. we recently started to
inspect the contents of ".gitmodules" for certain malicious
patterns), which has been corrected.
* rj/submodule-fsck-skip:
fsck: check skiplist for object in fsck_blob()
* en/rebase-i-microfixes:
git-rebase--merge: modernize "git-$cmd" to "git $cmd"
Fix use of strategy options with interactive rebases
t3418: add testcase showing problems with rebase -i and strategy options
"git filter-branch" when used with the "--state-branch" option
still attempted to rewrite the commits whose filtered result is
known from the previous attempt (which is recorded on the state
branch); the command has been corrected not to waste cycles doing
so.
* mb/filter-branch-optim:
filter-branch: skip commits present on --state-branch
Tighten the API to make it harder to misuse in-tree .gitmodules
file, even though it shares the same syntax with configuration
files, to read random configuration items from it.
* ao/config-from-gitmodules:
submodule-config: reuse config_from_gitmodules in repo_read_gitmodules
submodule-config: pass repository as argument to config_from_gitmodules
submodule-config: make 'config_from_gitmodules' private
submodule-config: add helper to get 'update-clone' config from .gitmodules
submodule-config: add helper function to get 'fetch' config from .gitmodules
config: move config_from_gitmodules to submodule-config.c
The "-l" option in "git branch -l" is an unfortunate short-hand for
"--create-reflog", but many users, both old and new, somehow expect
it to be something else, perhaps "--list". This step warns when "-l"
is used as a short-hand for "--create-reflog" and warns about the
future repurposing of the it when it is used.
* jk/branch-l-0-deprecation:
branch: deprecate "-l" option
t: switch "branch -l" to "branch --create-reflog"
t3200: unset core.logallrefupdates when testing reflog creation
"git grep" learned the "--column" option that gives not just the
line number but the column number of the hit.
* tb/grep-column:
contrib/git-jump/git-jump: jump to exact location
grep.c: add configuration variables to show matched option
builtin/grep.c: add '--column' option to 'git-grep(1)'
grep.c: display column number of first match
grep.[ch]: extend grep_opt to allow showing matched column
grep.c: expose {,inverted} match column in match_line()
Documentation/config.txt: camel-case lineNumber for consistency
"git submodule" did not correctly adjust core.worktree setting that
indicates whether/where a submodule repository has its associated
working tree across various state transitions, which has been
corrected.
* sb/submodule-core-worktree:
submodule deinit: unset core.worktree
submodule: ensure core.worktree is set after update
submodule: unset core.worktree if no working tree is present
When cherry-picking a single commit, we go through a special
code path that avoids creating a sequencer todo list at all.
This path expects our revision parsing to turn up exactly
one commit, and dies with a BUG if it doesn't.
But it's actually quite easy to fool. For example:
$ git cherry-pick --author=no.such.person HEAD
error: BUG: expected exactly one commit from walk
fatal: cherry-pick failed
This isn't a bug; it's just bogus input.
The condition to trigger this message actually has two
parts:
1. We saw no commits. That's the case in the example
above. Let's drop the "BUG" here to make it clear that
the input is the problem. And let's also use the phrase
"empty commit set passed", which matches what we say
when we do a real revision walk and it turns up empty.
2. We saw more than one commit. That one _should_ be
impossible to trigger, since we fed at most one tip and
provided the no_walk option (and we'll have already
expanded options like "--branches" that can turn into
multiple tips). If this ever triggers, it's an
indication that the conditional added by 7acaaac275
(revert: allow single-pick in the middle of cherry-pick
sequence, 2011-12-10) needs to more carefully define
the single-pick case.
So this can remain a bug, but we'll upgrade it to use
the BUG() macro, which would make it easier to detect
and analyze if it does trigger.
Signed-off-by: Jeff King <peff@peff.net> Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the user gives us a set that prepare_revision_walk()
takes to be empty, like:
git cherry-pick base..base
then we report an error. It's nonsense, and there's nothing
to pick.
But if they use revision options that later cull the list,
like:
git cherry-pick --author=nobody base~2..base
then we quietly create an empty todo list and return
success.
Arguably either behavior is acceptable, but we should
definitely be consistent about it. Reporting an error
seems to match the original intent, which dates all the way
back to 7e2bfd3f99 (revert: allow cherry-picking more than
one commit, 2010-06-02). That in turn was trying to match
the single-commit case that existed before then (and which
continues to issue an error).
Signed-off-by: Jeff King <peff@peff.net> Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since we don't care about how many bytes were written, simplify the return
value logic.
log_ref_write_fd() was written long before strbuf was fleshed out. Remove
the old manual buffer management code and replace it with strbuf(). Also
update copy_reflog_msg() which is called only by log_ref_write_fd() to use
strbuf as it keeps things consistent.
Signed-off-by: Ben Peart <Ben.Peart@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
clone: check connectivity even if clone is partial
The commit that introduced the partial clone feature - 548719fbdc
("clone: partial clone", 2017-12-08) - excluded connectivity checks
for partial clones, but this also meant that it is possible for a clone
to succeed, yet not have all objects either present or promised.
Specifically, if cloning with --filter=blob:none from a repository that
has a tag pointing to a blob, and the blob is not sent in the packfile,
the clone will pass, even if the blob is not referenced by any tree in
the packfile.
Turn on connectivity checks for partial clone.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
A filter line in a request to upload-pack filters out objects regardless
of whether they are directly referenced by a "want" line or not. This
means that cloning with "--filter=blob:none" (or another filter that
excludes blobs) from a repository with at least one ref pointing to a
blob (for example, the Git repository itself) results in output like the
following:
error: missing object referenced by 'refs/tags/junio-gpg-pub'
and if that particular blob is not referenced by a fetched tree, the
resulting clone fails fsck because there is no object from the remote to
vouch that the missing object is a promisor object.
Update both the protocol and the upload-pack implementation to include
all explicitly specified "want" objects in the packfile regardless of
the filter specification.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The git send-email documentation specifies RFC 2821 (the SMTP RFC) as
providing line length limits, but the specification that restricts line
length to 998 octets is RFC 2822 (the email message format RFC). Since
RFC 2822 has been obsoleted by RFC 5322, update the text to refer to RFC
5322 instead of RFC 2821.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
git send-email, when invoked without a --transfer-encoding option, sends
8bit data without a MIME version or a transfer encoding. This has
several downsides.
First, unless the transfer encoding is specified, it defaults to 7bit,
meaning that non-ASCII data isn't allowed. Second, if lines longer than
998 bytes are used, we will send an message that is invalid according to
RFC 5322. The --validate option, which is the default, catches this
issue, but it isn't clear to many people how to resolve this.
To solve these issues, default the transfer encoding to "auto", so that
we explicitly specify 8bit encoding when lines don't exceed 998 bytes
and quoted-printable otherwise. This means that we now always emit
Content-Transfer-Encoding and MIME-Version headers, so remove the
conditionals from this portion of the code.
It is unlikely that the unconditional inclusion of these two headers
will affect the deliverability of messages in anything but a positive
way, since MIME is already widespread and well understood by most email
programs.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
send-email: accept long lines with suitable transfer encoding
With --validate (which is the default), we warn about lines exceeding
998 characters due to the limits specified in RFC 5322. However, if
we're using a suitable transfer encoding (quoted-printable or base64),
we're guaranteed not to have lines exceeding 76 characters, so there's
no need to fail in this case. The auto transfer encoding handles this
specific case, so accept it as well.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
send-email: add an auto option for transfer encoding
For most patches, using a transfer encoding of 8bit provides good
compatibility with most servers and makes it as easy as possible to view
patches. However, there are some patches for which 8bit is not a valid
encoding: RFC 5322 specifies that a message must not have lines
exceeding 998 octets.
Add a transfer encoding value, auto, which indicates that a patch should
use 8bit where allowed and quoted-printable otherwise. Choose
quoted-printable instead of base64, since base64-encoded plain text is
treated as suspicious by some spam filters.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Recent version of PHP supports interface, trait, abstract class and
final class. This patch fixes the PHP hunk header regexp to support
all of these keywords.
Signed-off-by: Kana Natsuno <dev@whileimautomaton.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
builtin/config: work around an unsized array forward declaration
As reported here[0], Microsoft Visual Studio 2017.2 and "gcc -pedantic"
don't understand the forward declaration of an unsized static array.
They insist on an array size:
The thread [1] explains that this is due to the single-pass nature of
old compilers.
To work around this error, introduce the forward-declared function
usage_builtin_config() instead that uses the array
builtin_config_options only after it has been defined.
Also use this function in all other places where usage_with_options() is
called with the same arguments.
git-rebase--preserve-merges: fix formatting of todo help message
Part of the todo help message in git-rebase--preserve-merges.sh is
unnecessarily indented, making the message look weird. Remove the
extra lines and trailing indent.
This was a minor regression introduced by d48f97aa ("rebase:
reindent function git_rebase__interactive", 2018-03-23) in the 2.18
timeframe. The same issue exists in "rebase -i", but it is being
addressed separately as part of the rewrite of the subcommand into C.
Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Reviewed-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
We don't need to use backslash continuation, as the "&&"
already provides continuation (and happily soaks up empty
lines between commands).
We can also expand the multi-line printf into a
here-document, which lets us use line breaks more naturally
(and avoids another continuation that required us to break
the natural indentation).
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
fast-import: do not call diff_delta() with empty buffer
We know diff_delta() returns NULL, saying "no good delta exists for
it", when fed an empty data. Check the length of the data in the
caller to avoid such a call.
This incidentally reduces the number of attempted deltification we
see in the final statistics.
Signed-off-by: Mike Hommey <mh@glandium.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
fetch-pack: write shallow, then check connectivity
When fetching, connectivity is checked after the shallow file is
updated. There are 2 issues with this: (1) the connectivity check is
only performed up to ancestors of existing refs (which is not thorough
enough if we were deepening an existing ref in the first place), and (2)
there is no rollback of the shallow file if the connectivity check
fails.
To solve (1), update the connectivity check to check the ancestry chain
completely in the case of a deepening fetch by refraining from passing
"--not --all" when invoking rev-list in connected.c.
To solve (2), have fetch_pack() perform its own connectivity check
before updating the shallow file. To support existing use cases in which
"git fetch-pack" is used to download objects without much regard as to
the connectivity of the resulting objects with respect to the existing
repository, the connectivity check is only done if necessary (that is,
the fetch is not a clone, and the fetch involves shallow/deepen
functionality). "git fetch" still performs its own connectivity check,
preserving correctness but sometimes performing redundant work. This
redundancy is mitigated by the fact that fetch_pack() reports if it has
performed a connectivity check itself, and if the transport supports
connect or stateless-connect, it will bubble up that report so that "git
fetch" knows not to perform the connectivity check in such a case.
This was noticed when a user tried to deepen an existing repository by
fetching with --no-shallow from a server that did not send all necessary
objects - the connectivity check as run by "git fetch" succeeded, but a
subsequent "git fsck" failed.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
ref-filter: avoid backend filtering with --ignore-case
When for-each-ref is used with --ignore-case, we expect
match_name_as_path() to do a case-insensitive match. But
there's an extra layer of filtering that happens before we
even get there. Since commit cfe004a5a9 (ref-filter: limit
traversal to prefix, 2017-05-22), we feed the prefix to the
ref backend so that it can optimize the ref iteration.
There's no mechanism for us to tell the backend we're matching
case-insensitively. Nor is there likely to be one anytime soon,
since the packed backend relies on binary-searching the sorted list
of refs. Let's just punt on this case. The extra filtering is an
optimization that we simply can't do. We'll still give the correct
answer via the filtering in match_name_as_path().
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
for-each-ref: consistently pass WM_IGNORECASE flag
The match_name_as_path() function learned to set
WM_IGNORECASE in the "flags" field when the user passed
--ignore-case. But it forgot to actually pass the flags to
wildmatch()!
As a result, the --ignore-case feature has been broken since
it was added in 3bb16a8bf2 (tag, branch, for-each-ref: add
--ignore-case for sorting and filtering, 2016-12-04). We
didn't notice because we added tests only for git-branch and
git-tag. Whereas git-for-each-ref has slightly different
matching rules, and thus uses a different function (the
related function match_pattern() does it correctly).
Incidentally, this also caused clang's scan-build to
complain about the code; the assignment to "flags" was dead
code.
Note that we can't flip the test in t6300 to expect_success
yet. There's another bug, which will be dealt with in the
next patch.
Commit-message-by: Jeff King <peff@peff.net> Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The --ignore-case option was added by 3bb16a8bf2 (tag,
branch, for-each-ref: add --ignore-case for sorting and
filtering, 2016-12-04), but it was never tested. And indeed,
it does not work due to multiple bugs (which will be fixed
in subsequent patches).
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since commit ed8b10f631 ("fsck: check .gitmodules content", 2018-05-02),
fsck will issue an error message for '.gitmodules' content that cannot
be parsed correctly. This is the case, even when the corresponding blob
object has been included on the skiplist. For example, using the cgit
repository, we see the following:
$ git fsck
Checking object directories: 100% (256/256), done.
error: bad config line 5 in blob .gitmodules
error in blob 51dd1eff1edc663674df9ab85d2786a40f7ae3a5: gitmodulesParse: could not parse gitmodules blob
Checking objects: 100% (6626/6626), done.
$
$ git fsck
Checking object directories: 100% (256/256), done.
error: bad config line 5 in blob .gitmodules
Checking objects: 100% (6626/6626), done.
$
Note that the error message issued by the config parser is still
present, despite adding the object-id of the blob to the skiplist.
One solution would be to provide a means of suppressing the messages
issued by the config parser. However, given that (logically) we are
asking fsck to ignore this object, a simpler approach is to just not
call the config parser if the object is to be skipped. Add a check to
the 'fsck_blob()' processing function, to determine if the object is
on the skiplist and, if so, exit the function early.
Signed-off-by: Ramsay Jones <ramsay@ramsayjones.plus.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is a continuation of 94b410bba86 (.mailmap: Map email
addresses to names, 2013-07-12), merging names that are
spelled differently but have the same author email to the
same person.
Most spellings differed in accents or the order of names.
Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
In ed32b788c06 (version --build-options: report commit, too, if
possible, 2017-12-15), we introduced code to let `git version
--build-options` report the current commit from which the binaries were
built, if any.
To prevent erroneous commits from being reported (e.g. when unpacking
Git's source code from a .tar.gz file into a subdirectory of a different
Git project, as e.g. git_osx_installer does), we painstakingly set
GIT_CEILING_DIRECTORIES when trying to determine the current commit.
Except that we got the quoting wrong, and that variable therefore does
not have the desired effect.
The issue is that the $(shell) is resolved before the output is stuffed
into the command-line with -DGIT_BUILT_FROM_COMMIT, and therefore is
*not* inside quotes. And thus backslashing the quotes is wrong, as the
quote gets literally inserted into the CEILING_DIRECTORIES variable.
Let's fix that quoting, and while at it, also suppress the unhelpful
message
fatal: not a git repository (or any of the parent directories): .git
that gets printed to stderr if no current commit could be determined,
and might scare the occasional developer who simply tries to build Git
from scratch.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Helped-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Test 8 in t5407 appears to be an accidental exact duplicate of of test 5;
the testcode is identical and has identical repo state, but the test
description is different and suggests that rebase -m followed by rebase
--skip was what was actually supposed to be tested. Modify the test to
include the -m option.
Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The code to try seeing if a fetch is necessary in a submodule
during a fetch with --recurse-submodules got confused when the path
to the submodule was changed in the range of commits in the
superproject, sometimes showing "(null)". This has been corrected.
* sb/fix-fetching-moved-submodules:
t5526: test recursive submodules when fetching moved submodules
submodule: fix NULL correctness in renamed broken submodules
Build and test procedure for netrc credential helper (in contrib/)
has been updated.
* tz/cred-netrc-cleanup:
git-credential-netrc: make "all" default target of Makefile
git-credential-netrc: fix exit status when tests fail
git-credential-netrc: use in-tree Git.pm for tests
git-credential-netrc: minor whitespace cleanup in test script
Continuing with the idea to programmatically enumerate various
pieces of data required for command line completion, the codebase
has been taught to enumerate options prefixed with "--no-" to
negate them.
* nd/completion-negation:
completion: collapse extra --no-.. options
completion: suppress some -no- options
parse-options: option to let --git-completion-helper show negative form
When user edits the patch in "git add -p" and the user's editor is
set to strip trailing whitespaces indiscriminately, an empty line
that is unchanged in the patch would become completely empty
(instead of a line with a sole SP on it). The code introduced in
Git 2.17 timeframe failed to parse such a patch, but now it learned
to notice the situation and cope with it.
"git fetch-pack --all" used to unnecessarily fail upon seeing an
annotated tag that points at an object other than a commit.
* jk/fetch-all-peeled-fix:
fetch-pack: test explicitly that --all can fetch tag references pointing to non-commits
fetch-pack: don't try to fetch peel values with --all
"git send-pack --signed" (hence "git push --signed" over the http
transport) did not read user ident from the config mechanism to
determine whom to sign the push certificate as, which has been
corrected.
* ms/send-pack-honor-config:
builtin/send-pack: populate the default configs
The recent addition of "partial clone" experimental feature kicked
in when it shouldn't, namely, when there is no partial-clone filter
defined even if extensions.partialclone is set.
* jh/partial-clone:
list-objects: check if filter is NULL before using
* ab/refspec-init-fix:
refspec: initalize `refspec_item` in `valid_fetch_refspec()`
refspec: add back a refspec_item_init() function
refspec: s/refspec_item_init/&_or_die/g
Documentation: declare "core.ignoreCase" as internal variable
The current description of "core.ignoreCase" reads like an option which
is intended to be changed by the user while it's actually expected to
be set by Git on initialization only. Subsequently, Git relies on the
proper configuration of this variable, as noted by Bryan Turner [1]:
Git on a case-insensitive filesystem (APFS, HFS+, FAT32, exFAT,
vFAT, NTFS, etc.) is not designed to be run with anything other
than core.ignoreCase=true.
The commit-graph feature shipped in Git 2.18 has some inconsistencies in
the constants used by the implementation and specified by the format
document.
The commit data chunk uses the key "CDAT" in the file format, but was
previously documented to say "CGET".
The commit data chunk stores commit parents using two 32-bit fields that
typically store the integer position of the parent in the list of commit
ids within the commit-graph file. When a parent does not exist, we had
documented the value 0xffffffff, but implemented the value 0x70000000.
This swap is easy to correct in the documentation, but unfortunately
reduces the number of commits that we can store in the commit-graph.
Update that estimate, too.
Reported-by: Grant Welch <gwelch925@gmail.com> Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Implement ref-in-want on the client side so that when a server supports
the "ref-in-want" feature, a client will send "want-ref" lines for each
reference the client wants to fetch. This feature allows clients to
tolerate inconsistencies that exist when a remote repository's refs
change during the course of negotiation.
This allows a client to request to request a particular ref without
specifying the OID of the ref. This means that instead of hitting an
error when a ref no longer points at the OID it did at the beginning of
negotiation, negotiation can continue and the value of that ref will be
sent at the termination of negotiation, just before a packfile is sent.
More information on the ref-in-want feature can be found in
Documentation/technical/protocol-v2.txt.
Signed-off-by: Brandon Williams <bmwill@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Expand the transport fetch method signature, by adding an output
parameter, to allow transports to return information about the refs they
have fetched. Then communicate shallow status information through this
mechanism instead of by modifying the input list of refs.
This does require clients to sometimes generate the ref map twice: once
from the list of refs provided by the remote (as is currently done) and
potentially once from the new list of refs that the fetch mechanism
provides.
Signed-off-by: Brandon Williams <bmwill@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Refactor find_non_local_tags and get_ref_map to only take the
information they need instead of the entire transport struct. Besides
improving code clarity, this also improves their flexibility, allowing
for a different set of refs to be used instead of relying on the ones
stored in the transport struct.
Signed-off-by: Brandon Williams <bmwill@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Refactor the fetch_refs function into a function that does the fetching
of refs and another function that stores them. This is in preparation
for allowing additional processing of the fetched refs before updating
the local ref store.
Signed-off-by: Brandon Williams <bmwill@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Populate peer ref OIDs in get_ref_map instead of do_fetch. Besides
tightening scopes of variables in the code, this also prepares for
get_ref_map being able to be called multiple times within do_fetch.
Signed-off-by: Brandon Williams <bmwill@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
upload-pack: test negotiation with changing repository
Add tests to check the behavior of fetching from a repository which
changes between rounds of negotiation (for example, when different
servers in a load-balancing agreement participate in the same stateless
RPC negotiation). This forms a baseline of comparison to the ref-in-want
functionality (which will be introduced to the client in subsequent
commits), and ensures that subsequent commits do not change existing
behavior.
As part of this effort, a mechanism to substitute strings in a single
HTTP response is added.
Signed-off-by: Brandon Williams <bmwill@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, while performing packfile negotiation, clients are only
allowed to specify their desired objects using object ids. This causes
a vulnerability to failure when an object turns non-existent during
negotiation, which may happen if, for example, the desired repository is
provided by multiple Git servers in a load-balancing arrangement and
there exists replication delay.
In order to eliminate this vulnerability, implement the ref-in-want
feature for the 'fetch' command in protocol version 2. This feature
enables the 'fetch' command to support requests in the form of ref names
through a new "want-ref <ref>" parameter. At the conclusion of
negotiation, the server will send a list of all of the wanted references
(as provided by "want-ref" lines) in addition to the generated packfile.
Signed-off-by: Brandon Williams <bmwill@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix use of strategy options with interactive rebases
git-rebase.sh wrote strategy options to .git/rebase/merge/strategy_opts
in the following format:
'--ours' '--renormalize'
Note the double spaces.
git-rebase--interactive uses sequencer.c to parse that file, and
sequencer.c used split_cmdline() to get the individual strategy options.
After splitting, sequencer.c prefixed each "option" with a double dash,
so, concatenating all its options would result in:
-- --ours -- --renormalize
So, when it ended up calling try_merge_strategy(), that in turn would run
git merge-$strategy -- --ours -- --renormalize $merge_base -- $head $remote
instead of the expected/desired
git merge-$strategy --ours --renormalize $merge_base -- $head $remote
Remove the extra spaces so that when it goes through split_cmdline() we end
up with the desired command line.
Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
t3418: add testcase showing problems with rebase -i and strategy options
We are not passing the same args to merge strategies when we are doing an
--interactive rebase as we do with a --merge rebase. The merge strategy
should not need to be aware of which type of rebase is in effect. Add a
testcase which checks for the appropriate args.
Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>