In a following commit we will make "local" orthogonal to the format.
Although this will not apply to "relative", which does not use the
timezone, it applies to all other formats so move the timezone
conversion to the start of the function.
Signed-off-by: John Keeping <john@keeping.me.uk> Signed-off-by: Junio C Hamano <gitster@pobox.com>
This moves the setup of the "expected" file inside the test case. The
helper function has the advantage that we can use SQ in the file content
without needing to escape the quotes.
Signed-off-by: John Keeping <john@keeping.me.uk> Signed-off-by: Junio C Hamano <gitster@pobox.com>
When fast-import emits a crash report, it does so in the
user's local timezone. But because we omit the timezone
completely for DATE_LOCAL, a reader of the report does not
immediately know which time zone was used. Let's switch this
to ISO8601 instead, which includes the time zone.
This does mean we will show the time in UTC, but that's not
a big deal. A crash report like this will either be looked
at immediately (in which case nobody even looks at the
timestamp), or it will be passed along to a developer to
debug, in which case the original timezone is less likely to
be of interest.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: John Keeping <john@keeping.me.uk> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Documentation/git-for-each-ref: don't list date formats
We are about to add a new set of supported date formats and do not want
to have to maintain the same list in several different bits of
documentation. Refer to git-rev-list(1) which contains the full list of
supported formats.
Signed-off-by: John Keeping <john@keeping.me.uk> Signed-off-by: Junio C Hamano <gitster@pobox.com>
This list is already incomplete (missing "raw") and we're about to add
new formats. Since this option sets a default for git-log's --date
option, just refer to git-log(1).
Signed-off-by: John Keeping <john@keeping.me.uk> Signed-off-by: Junio C Hamano <gitster@pobox.com>
This feeds the format directly to strftime. Besides being a
little more flexible, the main advantage is that your system
strftime may know more about your locale's preferred format
(e.g., how to spell the days of the week).
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
In preparation for adding date modes that may carry extra
information beyond the mode itself, this patch converts the
date_mode enum into a struct.
Most of the conversion is fairly straightforward; we pass
the struct as a pointer and dereference the type field where
necessary. Locations that declare a date_mode can use a "{}"
constructor. However, the tricky case is where we use the
enum labels as constants, like:
show_date(t, tz, DATE_NORMAL);
Ideally we could say:
show_date(t, tz, &{ DATE_NORMAL });
but of course C does not allow that. Likewise, we cannot
cast the constant to a struct, because we need to pass an
actual address. Our options are basically:
1. Manually add a "struct date_mode d = { DATE_NORMAL }"
definition to each caller, and pass "&d". This makes
the callers uglier, because they sometimes do not even
have their own scope (e.g., they are inside a switch
statement).
2. Provide a pre-made global "date_normal" struct that can
be passed by address. We'd also need "date_rfc2822",
"date_iso8601", and so forth. But at least the ugliness
is defined in one place.
3. Provide a wrapper that generates the correct struct on
the fly. The big downside is that we end up pointing to
a single global, which makes our wrapper non-reentrant.
But show_date is already not reentrant, so it does not
matter.
This patch implements 3, along with a minor macro to keep
the size of the callers sane.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Merge branch 'jk/make-fix-dependencies' into maint
Build clean-up.
* jk/make-fix-dependencies:
Makefile: silence perl/PM.stamp recipe
Makefile: avoid timestamp updates to GIT-BUILD-OPTIONS
Makefile: drop dependency between git-instaweb and gitweb
There was a dead code that used to handle "git pull --tags" and
show special-cased error message, which was made irrelevant when
the semantics of the option changed back in Git 1.9 days.
* pt/pull-tags-error-diag:
pull: remove --tags error in no merge candidates case
Merge branch 'jk/diagnose-config-mmap-failure' into maint
The configuration reader/writer uses mmap(2) interface to access
the files; when we find a directory, it barfed with "Out of memory?".
* jk/diagnose-config-mmap-failure:
xmmap(): drop "Out of memory?"
config.c: rewrite ENODEV into EISDIR when mmap fails
config.c: avoid xmmap error messages
config.c: fix mmap leak when writing config
read-cache.c: drop PROT_WRITE from mmap of index
Merge branch 'jk/squelch-missing-link-warning-for-unreachable' into maint
Recent "git prune" traverses young unreachable objects to safekeep
old objects in the reachability chain from them, which sometimes
caused error messages that are unnecessarily alarming.
* jk/squelch-missing-link-warning-for-unreachable:
suppress errors on missing UNINTERESTING links
silence broken link warnings with revs->ignore_missing_links
add quieter versions of parse_{tree,commit}
Merge branch 'mm/rebase-i-post-rewrite-exec' into maint
"git rebase -i" fired post-rewrite hook when it shouldn't (namely,
when it was told to stop sequencing with 'exec' insn).
* mm/rebase-i-post-rewrite-exec:
t5407: use <<- to align the expected output
rebase -i: fix post-rewrite hook with failed exec command
rebase -i: demonstrate incorrect behavior of post-rewrite
The improved ARRAY_SIZE macro uses BARF_UNLESS_AN_ARRAY which expands
to a valid check for recent gcc versions and to 0 for older gcc
versions but is not defined on non-gcc builds.
Non-gcc builds need this macro to expand to 0 as well. The current outer
test (defined(__GNUC__) && (__GNUC__ >= 3)) is a strictly weaker
condition than the inner test (GIT_GNUC_PREREQ(3, 1)) so we can omit the
outer test and cause the BARF_UNLESS_AN_ARRAY macro to be defined
correctly on non-gcc builds as well as gcc builds with older versions.
Signed-off-by: Charles Bailey <cbailey32@bloomberg.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
More Perforce row number limit workaround for "git p4".
* ld/p4-changes-block-size:
git-p4: fixing --changes-block-size handling
git-p4: add tests for non-numeric revision range
git-p4: test with limited p4 server results
git-p4: additional testing of --changes-block-size
"git for-each-ref" reported "missing object" for 0{40} when it
encounters a broken ref. The lack of object whose name is 0{40} is
not the problem; the ref being broken is.
* mh/reporting-broken-refs-from-for-each-ref:
read_loose_refs(): treat NULL_SHA1 loose references as broken
read_loose_refs(): simplify function logic
for-each-ref: report broken references correctly
t6301: new tests of for-each-ref error handling
Various fixes around "git am" that applies a patch to a history
that is not there yet.
* pt/am-abort-fix:
am --abort: keep unrelated commits on unborn branch
am --abort: support aborting to unborn branch
am --abort: revert changes introduced by failed 3way merge
am --skip: support skipping while on unborn branch
am -3: support 3way merge on unborn branch
am --skip: revert changes introduced by failed 3way merge
Traditionally, external low-level 3-way merge drivers are expected
to produce their results based solely on the contents of the three
variants given in temporary files named by %O, %A and %B on their
command line. Additionally allow them to look at the final path
(given by %P).
* jc/ll-merge-expose-path:
ll-merge: pass the original path to external drivers
"git apply" cannot diagnose a patch corruption when the breakage is
to mark the length of the hunk shorter than it really is on the
hunk header line "@@ -l,k +m,n @@"; one special case it could is
when the hunk becomes no-op (e.g. k == n == 2 for two-line context
patch output), and it learned how to do so.
* jc/apply-reject-noop-hunk:
apply: reject a hunk that does not do anything
It turns out that many other commands that need to interact with the
result of running diff-files and diff-index, e.g. "git apply", "git
rm", etc., need to be adjusted to the new world order it brings in.
For example, it would break this sequence to correct a whitespace
breakage in the parts you changed:
In the old world order, "diff" showed a patch to modify an existing
empty file by adding its full contents, and "apply" updated the
index by modifying the existing empty blob (which is what an
Intent-to-Add entry records in the index) with that patch.
In the new world order, "diff" shows a patch to create a new file
with its full contents, but because "apply" thinks that the i-t-a
entry already exists in the index, it refused to accept a creation.
Adjusting "apply" to this new world order is easy, but we need to
assess the extent of the damage to the rest of the system the new
world order brought in before going forward and adjust them all,
after which we can resurrect the commit being reverted here.
Merge branch 'jk/http-backend-deadlock' into maint
Communication between the HTTP server and http_backend process can
lead to a dead-lock when relaying a large ref negotiation request.
Diagnose the situation better, and mitigate it by reading such a
request first into core (to a reasonable limit).
* jk/http-backend-deadlock:
http-backend: spool ref negotiation requests to buffer
t5551: factor out tag creation
http-backend: fix die recursion with custom handler
Merge branch 'jh/filter-empty-contents' into maint
The clean/smudge interface did not work well when filtering an
empty contents (failed and then passed the empty input through).
It can be argued that a filter that produces anything but empty for
an empty input is nonsense, but if the user wants to do strange
things, then why not?
* jh/filter-empty-contents:
sha1_file: pass empty buffer to index empty file
* jk/make-fix-dependencies:
Makefile: silence perl/PM.stamp recipe
Makefile: avoid timestamp updates to GIT-BUILD-OPTIONS
Makefile: drop dependency between git-instaweb and gitweb
That commit was an attempt to improve the safety of applying
a stash, because the application process may create
conflicted index entries, after which it is hard to restore
the original index state.
Unfortunately, this hurts some common workflows around "git
stash -k", like:
git add -p ;# (1) stage set of proposed changes
git stash -k ;# (2) get rid of everything else
make test ;# (3) make sure proposal is reasonable
git stash apply ;# (4) restore original working tree
If you "git commit" between steps (3) and (4), then this
just works. However, if these steps are part of a pre-commit
hook, you don't have that opportunity (you have to restore
the original state regardless of whether the tests passed or
failed).
It's possible that we could provide better tools for this
sort of workflow. In particular, even before ed178ef, it
could fail with a conflict if there were conflicting hunks
in the working tree and index (since the "stash -k" puts the
index version into the working tree, and we then attempt to
apply the differences between HEAD and the old working tree
on top of that). But the fact remains that people have been
using it happily for a while, and the safety provided by ed178ef is simply not that great. Let's revert it for now.
In the long run, people can work on improving stash for this
sort of workflow, but the safety tradeoff is not worth it in
the meantime.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
hooks/pre-auto-gc: adjust power checking for newer OS X
The output of "pmset -g batt" changed at some point from "Currently
drawing from 'AC Power'" to the slightly different "Now drawing from
'AC Power'". Starting the match from "drawing" makes the check work
in both old and new versions of OS X.
Signed-off-by: Panagiotis Astithas <pastith@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
l10n: de.po: change error message from "sagen" to "Meinten Sie"
We should not use "sagen" if someone has written something wrong.
Although it's "say" in English, we should not use it in German
and instead use our normal error message.
Recent "git prune" traverses young unreachable objects to safekeep
old objects in the reachability chain from them, which sometimes
caused error messages that are unnecessarily alarming.
* jk/squelch-missing-link-warning-for-unreachable:
suppress errors on missing UNINTERESTING links
silence broken link warnings with revs->ignore_missing_links
add quieter versions of parse_{tree,commit}
* pt/pull-tests:
t5520: check reflog action in fast-forward merge
t5521: test --dry-run does not make any changes
t5520: test --rebase failure on unborn branch with index
t5520: test --rebase with multiple branches
t5520: test work tree fast-forward when fetch updates head
t5520: test for failure if index has unresolved entries
t5520: test no merge candidates cases
t5520: prevent field splitting in content comparisons
The configuration reader/writer uses mmap(2) interface to access
the files; when we find a directory, it barfed with "Out of memory?".
* jk/diagnose-config-mmap-failure:
xmmap(): drop "Out of memory?"
config.c: rewrite ENODEV into EISDIR when mmap fails
config.c: avoid xmmap error messages
config.c: fix mmap leak when writing config
read-cache.c: drop PROT_WRITE from mmap of index
Bring consistency to error reporting mechanism used in "refs" API.
* mh/verify-lock-error-report:
ref_transaction_commit(): do not capitalize error messages
verify_lock(): do not capitalize error messages
verify_lock(): report errors via a strbuf
verify_lock(): on errors, let the caller unlock the lock
verify_lock(): return 0/-1 rather than struct ref_lock *
Allow whitespace breakages in deleted and context lines to be also
painted in the output.
* jc/diff-ws-error-highlight:
diff.c: --ws-error-highlight=<kind> option
diff.c: add emit_del_line() and emit_context_line()
t4015: separate common setup and per-test expectation
t4015: modernise style