This patch allows history display of whole trees/directories a la
"git-rev-list HEAD -- <dir or file>". I find this useful especially
when a project lives in its own subdirectory, as opposed to being all
of the GIT repository (i.e. when a sub-project is merged into a
super-project).
Signed-off-by: Luben Tuikov <ltuikov@yahoo.com> Signed-off-by: Junio C Hamano <junkio@cox.net>
The rev-list command that is recent enough can filter commits
based on paths they touch, so use it instead of generating the
full list and limiting it by passing it with diff-tree --stdin.
[jc: The patch originally came from Luben Tuikov but the it was
corrupt, but it was short enough to be applied by hand. I
added the --full-history to make the output compatible with the
original while doing so.]
The hash expansion is separated out into a function of its own, the hash
array (and size) names are made more obvious, and the code is generally
made to look a bit more like the object-ref hashing.
It also gets rid of "find_object()" returning an index (or negative
position if no object is found), since that is made redundant by the
simplified object rehashing. The basic operation is now "lookup_object()"
which just returns the object itself.
There's an almost unmeasurable speed increase, but more importantly, I
think the end result is more readable.
Signed-off-by: Linus Torvalds <torvalds@osdl.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
With history simplification, we still show merges that are required
to make the history _complete_, i.e. say that you had:
a
|
b
/ \
c d
| |
and neither "a" nor "b" actually changed the file, but both "c" and "d"
did: in this case we have to leave "b" around just because otherwise there
would be no way to show the _relationship_, even if "b" itself doesn't
actually change the tree in any way what-so-ever.
It would make sense to make that further simplification if the
"--parents" flag wasn't present. In that case the user is
literally asking for a list of commits and is not interested in
the relationship between them.
This patch also fixes a real bug. Without this patch, the
"--parents --full-history" combination (which you'd get if you
do something like
gitk --full-history Makefile
or similar) will actually _drop_ merges where all children are identical.
That's wrong in the --full-history case, because it means that the graph
ends up missing lots of entries.
In the process, this also should make
git-rev-list --full-history Makefile
give just the _true_ list of all commits that changed Makefile (and
properly ignore merges that were identical in one parent), because now
we're not asking for "--parent", so we don't need the unnecessary merge
commits to keep the history together.
Signed-off-by: Linus Torvalds <torvalds@osdl.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
If no delta is attempted on some objects then it is useless to load them
in memory, neither create any delta index for them. The best thing to
do is therefore to load and index them only when really needed.
Signed-off-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
upload-pack.c: <sys/poll.h> includes <ctype.h> on OpenBSD 3.8
Merlyn reports that <sys/poll.h> on OpenBSD 3.8 includes <ctype.h>
and having our custom ctype (done in git-compat-util.h which is
included via cache.h) makes upload-pack.c uncompilable. Try to
work it around by including the system headers first.
There are a few special places where some programs accessed the object
hash array directly, which bothered me because I wanted to play with some
simple re-organizations.
So this patch makes the object hash array data structures all entirely
local to object.c, and the few users who wanted to look at it now get to
use a function to query how many object index entries there can be, and to
actually access the array.
Signed-off-by: Linus Torvalds <torvalds@osdl.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
In the repacking window, if both objects we are looking at already came
from the same (old) pack-file, don't bother delta'ing them against each
other.
That means that we'll still always check for better deltas for (and
against!) _unpacked_ objects, but assuming incremental repacks, you'll
avoid the delta creation 99% of the time.
Signed-off-by: Linus Torvalds <torvalds@osdl.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
Commit 29e4d3635709778bcc808dbad0477efad82f8d7e fixed the
underlying update-index races but git-commit was not careful
enough to preserve the index file timestamp when copying the
index file. This caused t3402 test to occasionally fail.
* js/patch:
diff.c: fix get_patch_id()
t4014: fix test commit labels.
format-patch: use clear_commit_marks() instead of some ad-hockery
t4014: fix for whitespace from "wc -l"
t4014: add format-patch --ignore-if-in-upstream test
format-patch: introduce "--ignore-if-in-upstream"
add diff_flush_patch_id() to calculate the patch id
The commit tag and commit comments used in the test claimed that
the #1 commit was merged upstream where the test actually let the
upstream merge #2 commit. Fix them.
git.c:main() relies on the value of errno being set by the last attempt to
execute the command. However, if something goes awry in handle_alias(),
that assumption is wrong. So restore errno before returning from
handle_alias().
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <junkio@cox.net>
commit does not always succeed, so we'll have to check for
it in the absence of set -e. This fixes a regression
introduced in 9e4bc7dd1bb9d92491c475cec55147fa0b3f954d
Signed-off-by: Eric Wong <normalperson@yhbt.net> Signed-off-by: Junio C Hamano <junkio@cox.net>
Indexes are only needed when we are about preparing to commit. Prime them
inside commit() when we have all the info we need, and remove all the
redundant index setups.
While we are at it, make sure that index handling is correct when opening
new branches, and on initial import.
Signed-off-by: Martin Langhoff <martin@catalyst.net.nz> Signed-off-by: Junio C Hamano <junkio@cox.net>
git wrapper: fix command name in an error message.
When the command execution by execv_git_cmd() fails with an errno
other than ENOENT, we used an uninitialized variable instead of
the string that holds the command name to report what failed.
git-svn: be verbose by default on fetch/commit, add -q/--quiet option
Slower connections can make git-svn look as if it's doing
nothing for a long time; leaving the user wondering if we're
actually doing anything. Now we print some file progress just
to assure the user that something is going on while they're
waiting.
Added the -q/--quiet option to users to revert to the old method
if they preferred it.
Signed-off-by: Eric Wong <normalperson@yhbt.net> Signed-off-by: Junio C Hamano <junkio@cox.net>
git-svn: add --follow-parent and --no-metadata options to fetch
--follow-parent:
This is especially helpful when we're tracking a directory
that has been moved around within the repository, or if we
started tracking a branch and never tracked the trunk it was
descended from.
This relies on the SVN::* libraries to work. We can't
reliably parse path info from the svn command-line client
without relying on XML, so it's better just to have the SVN::*
libs installed.
This also removes oldvalue verification when calling update-ref
In SVN, branches can be deleted, and then recreated under the
same path as the original one with different ancestry
information, causing parent information to be mismatched /
misordered.
Also force the current ref, if existing, to be a parent,
regardless of whether or not it was specified.
--no-metadata:
This gets rid of the git-svn-id: lines at the end of every commit.
With this, you lose the ability to use the rebuild command. If
you ever lose your .git/svn/git-svn/.rev_db file, you won't be
able to fetch again, either. This is fine for one-shot imports.
Also fix some issues with multi-fetch --follow-parent that were
exposed while testing this. Additionally, repack checking is
simplified greatly.
git-svn log will not work on repositories using this, either.
Signed-off-by: Eric Wong <normalperson@yhbt.net> Signed-off-by: Junio C Hamano <junkio@cox.net>
The 'graft-branches' command can now analyze tree matches for
merge detection after commits are done, when --branch or
--branch-all-refs options are used.
We ensure that tree joins (--branch and --branch-all-refs
options) during commit time only add SVN parents that occurred
before the commit we're importing
Also fixed branch detection via merge messages, this manner of
merge detection (a la git-svnimport) is really all fuzzy, but at
least it actually works now :)
Add some new tests to go along with these fixes, too.
Signed-off-by: Eric Wong <normalperson@yhbt.net> Signed-off-by: Junio C Hamano <junkio@cox.net>
Tested on a plain Ubuntu Hoary installation
using subversion 1.1.1-2ubuntu3
1.1.x issues I had to deal with:
* Avoid the noisy command-line client compatibility check if we
use the libraries.
* get_log() arguments differ (now using a nice wrapper from
Junio's suggestion)
* get_file() is picky about what kind of file handles it gets,
so I ended up redirecting STDOUT. I'm probably overflushing
my file handles, but that's the safest thing to do...
* BDB kept segfaulting on me during tests, so svnadmin will use FSFS
whenever we can.
* If somebody used an expanded CVS $Id$ line inside a file, then
propsetting it to use svn:keywords will cause the original CVS
$Id$ to be retained when asked for the original file. As far as
I can see, this is a server-side issue. We won't care in the
test anymore, as long as it's not expanded by SVN, a static
CVS $Id$ line is fine.
While we're at making ourselves more compatible, avoid grep
along with the -q flag, which is GNU-specific. (grep avoidance
tip from Junio, too)
Signed-off-by: Eric Wong <normalperson@yhbt.net> Signed-off-by: Junio C Hamano <junkio@cox.net>
- combine_diff() took cnt (count) which is unsigned in nature but the
parameter type was declared as "int";
- find_next() took "uninteresting" parameter, which masked a static
function of the same name;
- show_parent_lno() took an unused parameter "cnt";
- show_patch_diff() used a local variable in nested inner scope with
the same name with different type, masking the one in the outer scope;
- the last loop in show_patch_diff iterated over lines so it should use
the local variable "lno"
* ew/rebase:
rebase: allow --skip to work with --merge
rebase: cleanup rebasing with --merge
rebase: allow --merge option to handle patches merged upstream
pkt-line.h uses GCC's __attribute__ extension but does not include
git-compat-util.h. So it will not compile with a compiler that does
not support this extension.
git-repack: Be careful when updating the same pack as an existing one.
After a clone, packfiles are read-only by default and "mv" to
replace the pack with a new one goes interactive, asking if the
user wants to replace it. If one is successfully moved and the
other is not, the pack and its idx would become out-of-sync and
corrupts the repository.
Recovering is straightforward -- it is just the matter of
finding the remaining .tmp-pack-* and make sure they are both
moved -- but we should be extra careful not to do something so
alarming to the users.
This lets you use something like this in your $GIT_DIR/config
file.
[diff]
color = auto
[diff.color]
new = blue
old = yellow
frag = reverse
When diff.color is set to "auto", colored diff is enabled when
the standard output is the terminal. Other choices are "always",
and "never". Usual boolean true/false can also be used.
The colormap entries can specify colors for the following slots:
plain - lines that appear in both old and new file (context)
meta - diff --git header and extended git diff headers
frag - @@ -n,m +l,k @@ lines (hunk header)
old - lines deleted from old file
new - lines added to new file
We no longer have to recommit each patch to remove the parent
information we're rebasing since we're using the low-level merge
strategies directly instead of git-merge.
Signed-off-by: Eric Wong <normalperson@yhbt.net> Signed-off-by: Junio C Hamano <junkio@cox.net>
git-commit: filter out log message lines only when editor was run.
The current behaviour strips out lines starting with a # even when fed
through stdin or -m. This is particularly bad when importing history from
another SCM (tailor 0.9.23 uses git-commit). In the best cases all lines
are stripped and the commit fails with a confusing "empty log message"
error, but in many cases the commit is done, with loss of information.
Note that it is quite peculiar to just have "#" handled as a leading
comment char here. One commonly meet CVS: or CG: or STG: as prefixes, and
using GIT: would be more robust as well as consistent with other commit
tools. However, that would break any tool relying on the # (if any).
Signed-off-by: Yann Dirson <ydirson@altern.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
This cleans up the use of safe_strncpy() even more. Since it has the
same semantics as strlcpy() use this name instead. Also move the
definition from inside path.c to its own file compat/strlcpy.c, and use
it conditionally at compile time, since some platforms already has
strlcpy(). It's included in the same way as compat/setenv.c.
Signed-off-by: Peter Eriksen <s022018@student.dtu.dk> Signed-off-by: Junio C Hamano <junkio@cox.net>
apply: replace NO_ACCURATE_DIFF with --inaccurate-eof runtime flag.
It does not make much sense to build git whose behaviour is
different depending on the brokenness of diff implementation of
the platform because the brokenness of the patch that is applied
with the tool depends on brokenness of the diff the person who
generates the patch uses. So we do not use NO_ACCURATE_DIFF
anymore, but help people to apply patches that do not record
incomplete lines correctly with a runtime flag.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de> Signed-off-by: Junio C Hamano <junkio@cox.net>
cvsimport: setup indexes correctly for ancestors and incremental imports
Two bugs had slipped in the "keep one index per branch during import"
patch. Both incremental imports and new branches would see an
empty tree for their initial commit. Now we cover all the relevant
cases, checking whether we actually need to setup the index before
preparing the actual commit, and doing it.
Signed-off-by: Martin Langhoff <martin@catalyst.net.nz> Signed-off-by: Junio C Hamano <junkio@cox.net>
When a bool variable appears without any value, it means true.
However, replacing the NULL value with an empty string, an earlier
commit f067a13745fbeae1aa357876348a00e5edd0a629 broke show-config.
git-repack was passing the -q along to pack-objects but ignoring it
itself. Correct the oversight. Signed-off-by: Martin Langhoff <martin@catalyst.net.nz> Signed-off-by: Junio C Hamano <junkio@cox.net>
Some people tend to do many little commits on a topic branch,
recording all the trials and errors, and when the topic is
reasonably cooked well, would want to record the net effect of
the series as one commit on top of the mainline, removing the
cruft from the history. The topic is then abandoned or forked
off again from that point at the mainline.
The barebone porcelainish that comes with core git tools does
not officially support such operation, but you can fake it by
using "git pull --no-merge" when such a topic branch is not a
strict superset of the mainline, like this:
git checkout mainline
git pull --no-commit . that-topic-branch
: fix conflicts if any
rm -f .git/MERGE_HEAD
git commit -a -m 'consolidated commit log message'
git branch -f that-topic-branch ;# now fully merged
This however does not work when the topic branch is a fast
forward of the mainline, because normal "git pull" will never
create a merge commit in such a case, and there is nothing
special --no-commit could do to begin with.
This patch introduces a new option, --squash, to support such a
workflow officially in both fast-forward case and true merge
case. The user-level operation would be the same in both cases:
git checkout mainline
git pull --squash . that-topic-branch
: fix conflicts if any -- naturally, there would be
: no conflict if fast forward.
git commit -a -m 'consolidated commit log message'
git branch -f that-topic-branch ;# now fully merged
When the current branch is already up-to-date with respect to
the other branch, there truly is nothing to do, so the new
option does not have any effect.
* pb/error:
usage: minimum type fix.
Customizable error handlers
git-merge: Don't use -p when outputting summary
git-commit: allow -e option anywhere on command line
patch-id: take "commit" prefix as well as "diff-tree" prefix
This patch makes the usage(), die() and error() handlers customizable.
Nothing in the git code itself uses that but many other libgit users
(like Git.pm) will.
This is implemented using the mutator functions primarily because you
cannot directly modifying global variables of libgit from a program that
dlopen()ed it, apparently. But having functions for that is a better API
anyway.
Signed-off-by: Petr Baudis <pasky@suse.cz> Signed-off-by: Junio C Hamano <junkio@cox.net>
This adds -b (--ignore-space-change) and -w (--ignore-all-space) flags to
diff. The main part of the patch is teaching libxdiff about it.
[jc: renamed xdl_line_match() to xdl_recmatch() since the former is used
for different purposes in xpatchi.c which is in the parts of the upstream
source we do not use.]
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de> Signed-off-by: Junio C Hamano <junkio@cox.net>
git-commit: allow -e option anywhere on command line
Previously, the command 'git-commit -e -m foo' would ignore the '-e' option
because the '-m' option overwrites the no_edit flag during sequential
option parsing. Now we cause -e to reset the no_edit flag after all
options are parsed.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <junkio@cox.net>
- always reset the color _before_ printing out the newline.
This is actually important. You (and Johannes) didn't see it, because
it only matters if you set the background, but if you don't do this,
you get some random and funky behaviour if you pick a color with a
non-default background (which still potentially has problems with tabs
etc, but less so).
- allow people to have a different color for the "file headers"
(DIFF_METAINFO) and for the "fragment header" (DIFF_FRAGINFO). Also,
make a difference between "normal color" and "reset colors"
- default to red/green for old/new lines. That's the norm, I'd think.
- instead of that eye-popping (and eye-ball-with-a-fondue-fork-popping)
purple color for metadata, use bold-face for file headers, and cyan for
the frag headers. I actually prefer the "gray background" for that, but
it only works well in xterms, so COLOR_CYAN it is..
Signed-off-by: Linus Torvalds <torvalds@osdl.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
* master:
git-svn: fix commit --edit flag when using SVN:: libraries
Makefile: do not force unneeded recompilation upon GIT_VERSION changes
Check and document the options to prevent mistakes.
Pass -DDEFAULT_GIT_TEMPLATE_DIR only where actually used.
* js/lsfix:
Initialize lock_file struct to all zero.
Make git-update-ref a builtin
Make git-update-index a builtin
Make git-stripspace a builtin
Make git-mailinfo a builtin
Make git-mailsplit a builtin
Make git-write-tree a builtin
* ew/rebase:
rebase --merge: fix for rebasing more than 7 commits.
rebase: error out for NO_PYTHON if they use recursive merge
Add renaming-rebase test.
rebase: Allow merge strategies to be used when rebasing
* jn/web:
gitweb: whitespace cleanup around '='
gitweb: Use $hash_base as $search_hash if possible
gitweb: Make use of $PATH_INFO for project parameter
Move $gitbin earlier in gitweb.cgi
Add git version to gitweb output
gitweb: whitespace cleanup
gitweb: style done with stylesheet
gitweb: A couple of page title tweaking
Fix: Support for the standard mime.types map in gitweb
gitweb: add type="text/css" to stylesheet link
Make CSS file gitweb/gitweb.css more readable
Fix gitweb stylesheet
Support for the standard mime.types map in gitweb
gitweb: text files for 'blob_plain' action without charset by default
gitweb: safely output binary files for 'blob_plain' action
Move gitweb style to gitweb.css
* jc/upload-corrupt:
daemon: send stderr to /dev/null instead of closing.
upload-pack/fetch-pack: support side-band communication
Retire git-clone-pack
upload-pack: prepare for sideband message support.
upload-pack: avoid sending an incomplete pack upon failure
* ff/c99:
Remove all void-pointer arithmetic.
Change types used in bitfields to be `int's.
Don't use empty structure initializers.
Cast pointers to `void *' when used in a format.
Don't instantiate structures with FAMs.
Initialize FAMs using `FLEX_ARRAY'.
Remove ranges from switch statements.
* pb/config:
git_config: access() returns 0 on success, not > 0
repo-config: Fix late-night bug
Read configuration also from $HOME/.gitconfig
Fix setting config variables with an alternative GIT_CONFIG
Support for extracting configuration from different files
rebase --merge: fix for rebasing more than 7 commits.
Instead of using 4-digit numbers to name commits being rebased,
just use "cmt.$msgnum" string, with $msgnum as a decimal number
without leading zero padding. This makes it possible to rebase
more than 9999 commits, but of more practical importance is that
the earlier code used "printf" to format already formatted
$msgnum and barfed when it counted up to 0008. In other words,
the old code was incapable of rebasing more than 7 commits, and
this fixes that problem.
Check and document the options to prevent mistakes.
When multiple recipients are given to git-send-email on the same
--cc line the code does not properly handle it.
Full and proper parsing of the email addresses so I can detect
which commas mean a new email address is more than I care to implement.
In particular this email address: "bibo,mao" <bibo.mao@intel.com>
must not be treated as two email addresses.
So this patch simply treats all commas in recipient lists as
an error and fails if one is given.
At the same time it documents that git-send-email wants multiple
instances of --cc specified on the command line if you want to
cc multiple recipients.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Junio C Hamano <junkio@cox.net>
Pass -DDEFAULT_GIT_TEMPLATE_DIR only where actually used.
Before this patch, -DDEFAULT_GIT_TEMPLATE_DIR was passed on compilation
command line to all and every .c file compiled. In fact the macro
is used by only one .c file, and unused by all other .c files.
Remove -DDEFAULT_GIT_TEMPLATE_DIR where unused. Follow the example of
exec_cmd.o. Pass -DDEFAULT_GIT_TEMPLATE_DIR only where actually used.
Signed-off-by: Yakov Lerner <iler.ml@gmail.com> Signed-off-by: Junio C Hamano <junkio@cox.net>
gitweb: Make use of $PATH_INFO for project parameter
Allow to have project name in the path part of URL, just after the name of
script. For example instead of gitweb.cgi?p=git.git you can write
gitweb.cgi/git.git or gitweb.cgi/git.git/
Not used in URLs inside gitweb; it means that the above alternate syntax
must be generated by hand, at least for now.
Side effect: project name parameter is now stripped of leading and
trailing slash before validation.
Signed-off-by: Jakub Narebski <jnareb@gmail.com> Signed-off-by: Junio C Hamano <junkio@cox.net>