The handling of `status_only` no longer interferes with the handling of
`unmatch_name_only`. `--quiet` no longer affects the exit code when using
`-L`/`--files-without-match`.
Signed-off-by: Anthony Sottile <asottile@umich.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
connect: reject paths that look like command line options
If we get a repo path like "-repo.git", we may try to invoke
"git-upload-pack -repo.git". This is going to fail, since
upload-pack will interpret it as a set of bogus options. But
let's reject this before we even run the sub-program, since
we would not want to allow any mischief with repo names that
actually are real command-line options.
You can still ask for such a path via git-daemon, but there's no
security problem there, because git-daemon enters the repo itself
and then passes "." on the command line.
Signed-off-by: Jeff King <peff@peff.net> Reviewed-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
connect: reject dashed arguments for proxy commands
If you have a GIT_PROXY_COMMAND configured, we will run it
with the host/port on the command-line. If a URL contains a
mischievous host like "--foo", we don't know how the proxy
command may handle it. It's likely to break, but it may also
do something dangerous and unwanted (technically it could
even do something useful, but that seems unlikely).
We should err on the side of caution and reject this before
we even run the command.
The hostname check matches the one we do in a similar
circumstance for ssh. The port check is not present for ssh,
but there it's not necessary because the syntax is "-p
<port>", and there's no ambiguity on the parsing side.
It's not clear whether you can actually get a negative port
to the proxy here or not. Doing:
git fetch git://remote:-1234/repo.git
keeps the "-1234" as part of the hostname, with the default
port of 9418. But it's a good idea to keep this check close
to the point of running the command to make it clear that
there's no way to circumvent it (and at worst it serves as a
belt-and-suspenders check).
Signed-off-by: Jeff King <peff@peff.net> Reviewed-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
connect: factor out "looks like command line option" check
We reject hostnames that start with a dash because they may
be confused for command-line options. Let's factor out that
notion into a helper function, as we'll use it in more
places. And while it's simple now, it's not clear if some
systems might need more complex logic to handle all cases.
Signed-off-by: Jeff King <peff@peff.net> Reviewed-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
connect: reject ssh hostname that begins with a dash
When commands like "git fetch" talk with ssh://$rest_of_URL/, the
code splits $rest_of_URL into components like host, port, etc., and
then spawns the underlying "ssh" program by formulating argv[] array
that has:
- the path to ssh command taken from GIT_SSH_COMMAND, etc.
- dashed options like '-batch' (for Tortoise), '-p <port>' as
needed.
- ssh_host, which is supposed to be the hostname parsed out of
$rest_of_URL.
- then the command to be run on the other side, e.g. git
upload-pack.
If the ssh_host ends up getting '-<anything>', the argv[] that is
used to spawn the command becomes something like:
which obviously is bogus, but depending on the actual value of
"<anything>", will make "ssh" parse and use it as an option.
Prevent this by forbidding ssh_host that begins with a "-".
Noticed-by: Joern Schneeweisz of Recurity Labs Reported-by: Brian at GitLab Signed-off-by: Junio C Hamano <gitster@pobox.com> Reviewed-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
t/lib-proto-disable: restore protocol.allow after config tests
The tests for protocol.allow actually set that variable in
the on-disk config, run a series of tests, and then never
clean up after themselves. This means that whatever tests we
run after have protocol.allow=never, which may influence
their results.
In most cases we either exit after running these tests, or
do another round of test_proto(). In the latter case, this happens to
work because:
1. Tests of the GIT_ALLOW_PROTOCOL environment variable
override the config.
2. Tests of the specific config "protocol.foo.allow"
override the protocol.allow config.
3. The next round of protocol.allow tests start off by
setting the config to a known value.
However, it's a land-mine waiting to trap somebody adding
new tests to one of the t581x test scripts. Let's make sure
we clean up after ourselves.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a remote server uses git-shell, the client side will
connect to it like:
ssh server "git-upload-pack 'foo.git'"
and we literally exec ("git-upload-pack", "foo.git"). In
early versions of upload-pack and receive-pack, we took a
repository argument and nothing else. But over time they
learned to accept dashed options. If the user passes a
repository name that starts with a dash, the results are
confusing at best (we complain of a bogus option instead of
a non-existent repository) and malicious at worst (the user
can start an interactive pager via "--help").
We could pass "--" to the sub-process to make sure the
user's argument is interpreted as a branch name. I.e.:
git-upload-pack -- -foo.git
But adding "--" automatically would make us inconsistent
with a normal shell (i.e., when git-shell is not in use),
where "-foo.git" would still be an error. For that case, the
client would have to specify the "--", but they can't do so
reliably, as existing versions of git-shell do not allow
more than a single argument.
The simplest thing is to simply disallow "-" at the start of
the repo name argument. This hasn't worked either with or
without git-shell since version 1.0.0, and nobody has
complained.
Note that this patch just applies to do_generic_cmd(), which
runs upload-pack, receive-pack, and upload-archive. There
are two other types of commands that git-shell runs:
- do_cvs_cmd(), but this already restricts the argument to
be the literal string "server"
- admin-provided commands in the git-shell-commands
directory. We'll pass along arbitrary arguments there,
so these commands could have similar problems. But these
commands might actually understand dashed arguments, so
we cannot just block them here. It's up to the writer of
the commands to make sure they are safe. With great
power comes great responsibility.
Reported-by: Timo Schmid <tschmid@ernw.de> Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jk/pack-name-cleanups:
index-pack: make pointer-alias fallbacks safer
replace snprintf with odb_pack_name()
odb_pack_keep(): stop generating keepfile name
sha1_file.c: make pack-name helper globally accessible
move odb_* declarations out of git-compat-util.h
* jk/rev-parse-cleanup:
rev-parse: simplify parsing of ref options
rev-parse: add helper for parsing "--foo/--foo="
rev-parse: use skip_prefix when parsing options
Merge branch 'ew/http-alternates-as-redirects-warning' into maint
Recent versions of Git treats http alternates (used in dumb http
transport) just like HTTP redirects and requires the client to
enable following it, due to security concerns. But we forgot to
give a warning when we decide not to honor the alternates.
* ew/http-alternates-as-redirects-warning:
http: release strbuf on disabled alternates
http: inform about alternates-as-redirects behavior
Merge branch 'dp/filter-branch-prune-empty' into maint
"git filter-branch --prune-empty" drops a single-parent commit that
becomes a no-op, but did not drop a root commit whose tree is empty.
* dp/filter-branch-prune-empty:
p7000: add test for filter-branch with --prune-empty
filter-branch: fix --prune-empty on parentless commits
t7003: ensure --prune-empty removes entire branch when applicable
t7003: ensure --prune-empty can prune root commit
Merge branch 'mm/fetch-show-error-message-on-unadvertised-object' into maint
"git fetch" that requests a commit by object name, when the other
side does not allow such an request, failed without much
explanation.
* mm/fetch-show-error-message-on-unadvertised-object:
fetch-pack: add specific error for fetching an unadvertised object
fetch_refs_via_pack: call report_unmatched_refs
fetch-pack: move code to report unmatched refs to a function
Merge branch 'jk/interpret-branch-name' into maint
"git branch @" created refs/heads/@ as a branch, and in general the
code that handled @{-1} and @{upstream} was a bit too loose in
disambiguating.
* jk/interpret-branch-name:
checkout: restrict @-expansions when finding branch
strbuf_check_ref_format(): expand only local branches
branch: restrict @-expansions when deleting
t3204: test git-branch @-expansion corner cases
interpret_branch_name: allow callers to restrict expansions
strbuf_branchname: add docstring
strbuf_branchname: drop return value
interpret_branch_name: move docstring to header file
interpret_branch_name(): handle auto-namelen for @{-1}
A few tests were run conditionally under (rare) conditions where
they cannot be run (like running cvs tests under 'root' account).
* ab/cond-skip-tests:
gitweb tests: skip tests when we don't have Time::HiRes
gitweb tests: change confusing "skip_all" phrasing
cvs tests: skip tests that call "cvs commit" when running as root
user.email that consists of only cruft chars should consistently
error out, but didn't.
* jk/ident-empty:
ident: do not ignore empty config name/email
ident: reject all-crud ident name
ident: handle NULL email when complaining of empty name
ident: mark error messages for translation
The t/perf performance test suite was not prepared to test not so
old versions of Git, but now it covers versions of Git that are not
so ancient.
* jt/perf-updates:
t/perf: add fallback for pre-bin-wrappers versions of git
t/perf: use $MODERN_GIT for all repo-copying steps
t/perf: export variable used in other blocks
Merge branch 'jk/parse-config-key-cleanup' into maint
The "parse_config_key()" API function has been cleaned up.
* jk/parse-config-key-cleanup:
parse_hide_refs_config: tell parse_config_key we don't want a subsection
parse_config_key: allow matching single-level config
parse_config_key: use skip_prefix instead of starts_with
refs: parse_hide_refs_config to use parse_config_key
Merge branch 'jc/config-case-cmdline-take-2' into maint
The code to parse "git -c VAR=VAL cmd" and set configuration
variable for the duration of cmd had two small bugs, which have
been fixed.
This supersedes jc/config-case-cmdline topic that has been discarded.
* jc/config-case-cmdline-take-2:
config: use git_config_parse_key() in git_config_parse_parameter()
config: move a few helper functions up
The code to parse the command line "git grep <patterns>... <rev>
[[--] <pathspec>...]" has been cleaned up, and a handful of bugs
have been fixed (e.g. we used to check "--" if it is a rev).
* jk/grep-no-index-fix:
grep: treat revs the same for --untracked as for --no-index
grep: do not diagnose misspelt revs with --no-index
grep: avoid resolving revision names in --no-index case
grep: fix "--" rev/pathspec disambiguation
grep: re-order rev-parsing loop
grep: do not unnecessarily query repo for "--"
grep: move thread initialization a little lower
Merge branch 'jn/remote-helpers-with-git-dir' into maint
"git ls-remote" and "git archive --remote" are designed to work
without being in a directory under Git's control. However, recent
updates revealed that we randomly look into a directory called
.git/ without actually doing necessary set-up when working in a
repository. Stop doing so.
* jn/remote-helpers-with-git-dir:
remote helpers: avoid blind fall-back to ".git" when setting GIT_DIR
remote: avoid reading $GIT_DIR config in non-repo
Merge branch 'jk/push-deadlock-regression-fix' into maint
"git push" had a handful of codepaths that could lead to a deadlock
when unexpected error happened, which has been fixed.
* jk/push-deadlock-regression-fix:
send-pack: report signal death of pack-objects
send-pack: read "unpack" status even on pack-objects failure
send-pack: improve unpack-status error messages
send-pack: use skip_prefix for parsing unpack status
send-pack: extract parsing of "unpack" response
receive-pack: fix deadlock when we cannot create tmpdir
Map both old addresses to the new, hopefully more permanent one.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net> Signed-off-by: Michael J Gruber <git@grubix.eu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jan Palus noticed that some here-doc are spelled incorrectly,
resulting the entire remainder of the test snippet being slurped
into the "expect" file as if it were data, e.g. in this sequence
the last command of the test is "cat" that sends everything to
'expect' and succeeds.
Fixing these issues in t7004 and t7030 reveals that "git tag -v"
and "git verify-tag" with their --format option do not work as the
test was expecting originally. Instead of showing both valid tags
and tags with incorrect signatures on their output, tags that do not
pass verification are omitted from the output. Another breakage that
is uncovered is that these tests must be restricted to environment
where gpg is available.
Arguably, that is a safer behaviour, and because the format
specifiers like %(tag) do not have a way to show if the signature
verifies correctly, the command with the --format option cannot be
used to get a list of tags annotated with their signature validity
anyway.
For now, let's fix the here-doc syntax, update the expectation to
match the reality, and update the test prerequisite.
Maybe later when we extend the --format language available to "git
tag -v" and "git verify-tag" to include things like "%(gpg:status)",
we may want to change the behaviour so that piping a list of tag
names into
becomes a good way to produce such a list, but that is a separate
topic.
Noticed-by: Jan Palus <jan.palus@gmail.com> Helped-by: Jeff King <peff@peff.net> Signed-off-by: Santiago Torres <santiago@nyu.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
t7406: correct test case for submodule-update initial population
There are three issues with the test:
* The syntax of the here-doc was wrong, such that the entire test was
sucked into the here-doc, which is why the test succeeded.
* The variable $submodulesha1 was not expanded as it was inside a quoted
here text. We do not want to quote EOF marker for this.
* The redirection from the git command to the output file for comparison
was wrong as the -C operator from git doesn't apply to the redirect path.
Also we're interested in stderr of that command.
Noticed-by: Jan Palus <jan.palus@gmail.com> Signed-off-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
This was an oversight in 55856a35b2 (rm: absorb a submodules git dir
before deletion, 2016-12-27), as the body of the test changed without
adapting the test subject.
Signed-off-by: Stefan Beller <sbeller@google.com> Reviewed-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
"Cc:" on the trailer part does not have to conform to RFC strictly,
unlike in the e-mail header. "git send-email" has been updated to
ignore anything after '>' when picking addresses, to allow non-address
cruft like " # stable 4.4" after the address.
* jh/send-email-one-cc:
send-email: only allow one address per body tag
Merge branch 'jk/show-branch-lift-name-len-limit' into maint
"git show-branch" expected there were only very short branch names
in the repository and used a fixed-length buffer to hold them
without checking for overflow.
* jk/show-branch-lift-name-len-limit:
show-branch: use skip_prefix to drop magic numbers
show-branch: store resolved head in heap buffer
show-branch: drop head_len variable
Merge branch 'jk/tempfile-ferror-fclose-confusion' into maint
A caller of tempfile API that uses stdio interface to write to
files may ignore errors while writing, which is detected when
tempfile is closed (with a call to ferror()). By that time, the
original errno that may have told us what went wrong is likely to
be long gone and was overwritten by an irrelevant value.
close_tempfile() now resets errno to EIO to make errno at least
predictable.
* jk/tempfile-ferror-fclose-confusion:
tempfile: set errno to a known value before calling ferror()
Merge branch 'rl/remote-allow-missing-branch-name-merge' into maint
"git remote rm X", when a branch has remote X configured as the
value of its branch.*.remote, tried to remove branch.*.remote and
branch.*.merge and failed if either is unset.
* rl/remote-allow-missing-branch-name-merge:
remote: ignore failure to remove missing branch.<name>.merge
Merge branch 'dt/gc-ignore-old-gc-logs' into maint
A "gc.log" file left by a backgrounded "gc --auto" disables further
automatic gc; it has been taught to run at least once a day (by
default) by ignoring a stale "gc.log" file that is too old.
* dt/gc-ignore-old-gc-logs:
gc: ignore old gc.log files
Merge branch 'jt/upload-pack-error-report' into maint
"git upload-pack", which is a counter-part of "git fetch", did not
report a request for a ref that was not advertised as invalid.
This is generally not a problem (because "git fetch" will stop
before making such a request), but is the right thing to do.
* jt/upload-pack-error-report:
upload-pack: report "not our ref" to client
Merge branch 'jc/diff-populate-filespec-size-only-fix' into maint
"git diff --quiet" relies on the size field in diff_filespec to be
correctly populated, but diff_populate_filespec() helper function
made an incorrect short-cut when asked only to populate the size
field for paths that need to go through convert_to_git() (e.g. CRLF
conversion).
* jc/diff-populate-filespec-size-only-fix:
diff: do not short-cut CHECK_SIZE_ONLY check in diff_populate_filespec()