pack-objects: turn off bitmaps when we split packs
If a pack.packSizeLimit is set, we may split the pack data
across multiple packfiles. This means we cannot generate
.bitmap files, as they require that all of the reachable
objects are in the same pack. We check that condition when
we are generating the list of objects to pack (and disable
bitmaps if we are not packing everything), but we forgot to
update it when we notice that we needed to split (which
doesn't happen until the actual write phase).
The resulting bitmaps are quite bogus (they mention entries
that do not exist in the pack!) and can cause a fetch or
push to send insufficient objects.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
gitweb: use start_form, not startform that was removed in CGI.pm 4.04
CGI.pm 4.04 removed the startform method, which had previously been
deprecated in favour of start_form. Changes file for CGI.pm says:
4.04 2014-09-04
[ REMOVED / DEPRECATIONS ]
- startform and endform methods removed (previously deprecated,
you should be using the start_form and end_form methods)
Signed-off-by: Roland Mas <lolando@debian.org> Reviewed-by: Jakub Narębski <jnareb@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
mergetools/meld: make usage of `--output` configurable and more robust
Older versions of meld listed --output in `meld --help`.
Newer versions only mention `meld [OPTIONS...]`.
Improve the checks to catch these newer versions.
Add a `mergetool.meld.hasOutput` configuration to allow
overriding the heuristic.
Reported-by: Andrey Novoseltsev <novoselt@gmail.com> Helped-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: David Aguilar <davvid@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Documentation: fix misrender of pretty-formats in Asciidoctor
Neither the AsciiDoc nor the Asciidoctor documentation specify whether
the same number of delimiter characters must be used to end a block as
to begin it, although both sets of documentation show exactly matching
pairs. AsciiDoc allows mismatches, but AsciiDoctor apparently does not.
Adjust the pretty formats documentation to use matching pairs to prevent
a misrendering where the remainder of the document was rendered as a
listing block.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some MUAs mangled a line in a message that begins with "From " to
">From " when writing to a mailbox file and feeding such an input to
"git am" used to lose such a line.
* jk/mbox-from-line:
mailinfo: work around -Wstring-plus-int warning
mailinfo: make ">From" in-body header check more robust
If the user-supplied hostname can't be found then we should not use it.
We already avoid doing that in the non-NO_IPV6 case by checking if the
return value of getaddrinfo() is zero (success). Do the same in the
NO_IPV6 case and make sure the return value of gethostbyname() isn't
NULL before dereferencing this pointer.
Signed-off-by: Rene Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* so/rebase-doc:
Documentation/git-rebase.txt: <upstream> must be given to specify <branch>
Documentation/git-rebase.txt: -f forces a rebase that would otherwise be a no-op
Merge branch 'maint' of git://github.com/git-l10n/git-po into maint
* 'maint' of git://github.com/git-l10n/git-po:
l10n: de.po: use comma before "um"
l10n: de.po: change Email to E-Mail
po/TEAMS: add new member to German translation team
The just-released Apple Xcode 6.0.1 has -Wstring-plus-int enabled by
default which complains about pointer arithmetic applied to a string
literal:
builtin/mailinfo.c:303:24: warning:
adding 'long' to a string does not append to the string
return !memcmp(SAMPLE + (cp - line), cp, strlen(SAMPLE) ...
~~~~~~~^~~~~~~~~~~~~
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Merge branch 'jn/unpack-trees-checkout-m-carry-deletion' into maint
* jn/unpack-trees-checkout-m-carry-deletion:
checkout -m: attempt merge when deletion of path was staged
unpack-trees: use 'cuddled' style for if-else cascade
unpack-trees: simplify 'all other failures' case
* jc/apply-ws-prefix:
apply: omit ws check for excluded paths
apply: hoist use_patch() helper for path exclusion up
apply: use the right attribute for paths in non-Git patches
* jk/pretty-empty-format:
pretty: make empty userformats truly empty
pretty: treat "--format=" as an empty userformat
revision: drop useless string offset when parsing "--pretty"
Documentation/git-rebase.txt: <upstream> must be given to specify <branch>
Current syntax description makes one wonder if there is any
syntactic way to distinguish between <branch> and <upstream> so that
one can specify <branch> but not <upstream>, but that is not the
case.
Make it explicit that these arguments are positional, i.e. the
earlier ones cannot be omitted if you want to give later ones.
Signed-off-by: Sergey Organov <sorganov@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
mailinfo: make ">From" in-body header check more robust
Since commit 81c5cf7 (mailinfo: skip bogus UNIX From line inside
body, 2006-05-21), we have treated lines like ">From" in the body as
headers. This makes "git am" work for people who erroneously paste
the whole output from format-patch:
From 12345abcd...fedcba543210 Mon Sep 17 00:00:00 2001
From: them
Subject: [PATCH] whatever
into their email body (assuming that an mbox writer then quotes
"From" as ">From", as otherwise we would actually mailsplit on the
in-body line).
However, this has false positives if somebody actually has a commit
body that starts with "From "; in this case we erroneously remove
the line entirely from the commit message. We can make this check
more robust by making sure the line actually looks like a real mbox
"From" line.
Inspect the line that begins with ">From " a more carefully to only
skip lines that match the expected pattern (note that the datestamp
part of the format-patch output is designed to be kept constant to
help those who write magic(5) entries).
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fsck tries hard to detect missing objects, and will complain
(and exit non-zero) about any inter-object links that are
missing. However, it will not exit non-zero for any missing
ref tips, meaning that a severely broken repository may
still pass "git fsck && echo ok".
The problem is that we use for_each_ref to iterate over the
ref tips, which hides broken tips. It does at least print an
error from the refs.c code, but fsck does not ever see the
ref and cannot note the problem in its exit code. We can solve
this by using for_each_rawref and noting the error ourselves.
In addition to adding tests for this case, we add tests for
all types of missing-object links (all of which worked, but
which we were not testing).
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce CONFIG_REGEX_NONE as a more explicit sentinel value to say
"we do not want to replace any existing entry" and use it in the
implementation of "git config --add".
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
index-pack: fix race condition with duplicate bases
When we are resolving deltas in an indexed pack, we do it by
first selecting a potential base (either one stored in full
in the pack, or one created by resolving another delta), and
then resolving any deltas that use that base. When we
resolve a particular delta, we flip its "real_type" field
from OBJ_{REF,OFS}_DELTA to whatever the real type is.
We assume that traversing the objects this way will visit
each delta only once. This is correct for most packs; we
visit the delta only when we process its base, and each
object (and thus each base) appears only once. However, if a
base object appears multiple times in the pack, we will try
to resolve any deltas based on it once for each instance.
We can detect this case by noting that a delta we are about
to resolve has already had its real_type field flipped, and
we already do so with an assert(). However, if multiple
threads are in use, we may race with another thread on
comparing and flipping the field. We need to synchronize the
access.
The right mechanism for doing this is a compare-and-swap (we
atomically "claim" the delta for our own and find out
whether our claim was successful). We can implement this
in C by using a pthread mutex to protect the operation. This
is not the fastest way of doing a compare-and-swap; many
processors provide instructions for this, and gcc and other
compilers provide builtins to access them. However, some
experiments showed that lock contention does not cause a
significant slowdown here. Adding c-a-s support for many
compilers would increase the maintenance burden (and we
would still end up including the pthread version as a
fallback).
Note that we only need to touch the OBJ_REF_DELTA codepath
here. An OBJ_OFS_DELTA object points to its base using an
offset, and therefore has only one base, even if another
copy of that base object appears in the pack (we do still
touch it briefly because the setting of real_type is
factored out of resolve_data).
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Pushing a large number of refs works over most transports,
because we implement send-pack as an internal function.
However, it can sometimes fail when pushing over http,
because we have to spawn "git send-pack --stateless-rpc" to
do the heavy lifting, and we pass each refspec on the
command line. This can cause us to overflow the OS limits on
the size of the command line for a large push.
We can solve this by giving send-pack a --stdin option and
using it from remote-curl. We already dealt with this on
the fetch-pack side in 078b895 (fetch-pack: new --stdin
option to read refs from stdin, 2012-04-02). The stdin
option (and in particular, its use of packet-lines for
stateless-rpc input) is modeled after that solution.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
checkout -m: attempt merge when deletion of path was staged
twoway_merge() is missing an o->gently check in the case where a file
that needs to be modified is missing from the index but present in the
old and new trees. As a result, in this case 'git checkout -m' errors
out instead of trying to perform a merge.
Fix it by checking o->gently. While at it, inline the o->gently check
into reject_merge to prevent future call sites from making the same
mistake.
Noticed by code inspection. The test for the motivating case was
added by JC.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-prompt: do not look for refs/stash in $GIT_DIR
Since dd0b72c (bash prompt: use bash builtins to check stash
state, 2011-04-01), git-prompt checks whether we have a
stash by looking for $GIT_DIR/refs/stash. Generally external
programs should never do this, because they would miss
packed-refs.
That commit claims that packed-refs does not pack
refs/stash, but that is not quite true. It does pack the
ref, but due to a bug, fails to prune the ref. When we fix
that bug, we would want to be doing the right thing here.
Signed-off-by: Jeff King <peff@peff.net> Reviewed-by: Michael Haggerty <mhagger@alum.mit.edu> Reviewed-by: Ronnie Sahlberg <sahlberg@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
When creating a new annotated tag, we sprintf the refname
into a static-sized buffer. If we have an absurdly long
tagname, like:
git init repo &&
cd repo &&
git commit --allow-empty -m foo &&
git tag -m message mytag &&
git fast-export mytag |
perl -lpe '/^tag/ and s/mytag/"a" x 8192/e' |
git fast-import <input
we'll overflow the buffer. We can fix it by using a strbuf.
Signed-off-by: Jeff King <peff@peff.net> Reviewed-by: Michael Haggerty <mhagger@alum.mit.edu> Reviewed-by: Ronnie Sahlberg <sahlberg@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
fast-import: clean up pack_data pointer in end_packfile
We have a global pointer pack_data pointing to the current
pack we have open. Inside end_packfile we have two new
pointers, old_p and new_p. The latter points to pack_data,
and the former points to the new "installed" version of the
packfile we get when we hand the file off to the regular
sha1_file machinery. When then free old_p.
Presumably the extra old_p pointer was there so that we
could overwrite pack_data with new_p and still free old_p,
but we don't do that. We just leave pack_data pointing to
bogus memory, and don't overwrite it until we call
start_packfile again (if ever).
This can cause problems for our die routine, which calls
end_packfile to clean things up. If we die at the wrong
moment, we can end up looking at invalid memory in
pack_data left after the last end_packfile().
Instead, let's make sure we set pack_data to NULL after we
free it, and make calling endfile() again with a NULL
pack_data a noop (there is nothing to end).
We can further make things less confusing by dropping old_p
entirely, and moving new_p closer to its point of use.
Signed-off-by: Jeff King <peff@peff.net> Reviewed-by: Ronnie Sahlberg <sahlberg@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
After we have packed all refs, we prune any loose refs that
correspond to what we packed. We do so by first taking a
lock with lock_ref_sha1, and then deleting the loose ref
file.
However, lock_ref_sha1 will refuse to take a lock on any
refs that exist at the top-level of the "refs/" directory,
and we skip pruning the ref. This is almost certainly not
what we want to happen here. The criteria to be pruned
should not differ from that to be packed; if a ref makes it
to prune_ref, it's because we want it both packed and
pruned (if there are refs you do not want to be packed, they
should be omitted much earlier by pack_ref_is_possible,
which we do in this case if --all is not given).
We can fix this by switching to lock_any_ref_for_update.
This behaves exactly the same with the exception of this
top-level check.
Signed-off-by: Jeff King <peff@peff.net> Reviewed-by: Michael Haggerty <mhagger@alum.mit.edu> Reviewed-by: Ronnie Sahlberg <sahlberg@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Keep poll's timeout at -1 when uploadpack.keepalive = 0, instead of
setting it to -1000, since some pedantic old systems (eg HP-UX) and
the gnulib compat/poll will treat only -1 as the valid value for
an infinite timeout.
Signed-off-by: Edward Thomson <ethomson@microsoft.com> Acked-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we do a combined diff, we individually diff against
each parent, and then use intersect_paths to do a parallel
walk through the sorted results and come up with a final
list of interesting paths.
The sort order here is that returned by the diffs, which
means it is in git's tree-order which sorts sub-trees as if
their paths have "/" at the end. When we do our parallel
walk, we need to use a comparison function which provides
the same order.
Since 8518ff8 (combine-diff: optimize combine_diff_path sets
intersection, 2014-01-20), we use a simple strcmp to
compare the pathnames, and get this wrong. It's somewhat
hard to trigger because normally a diff does not produce
tree entries at all, and therefore the sort order is the
same as a strcmp. However, if the "-t" option is used with
the diff, then we will produce diff_filepairs for both trees
and files.
We can use base_name_compare to do the comparison, just as
the tree-diff code does. Even though what we have are not
technically base names (they are full paths within the
tree), the end result is the same (we do not care about
interior slashes at all, only about the final character).
However, since we do not have the length of each path
stored, we take a slight shortcut: if neither of the entries
is a sub-tree then the comparison is equivalent to a strcmp.
This lets us skip the extra strlen calls in the common case
without having to reimplement base_name_compare from
scratch.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Makefile: make perf tests optional for profile build
The perf tests need a repository to operate on; if none is
defined, we fall back to the repository containing our build
directory. That fails, though, for an exported tarball of
git.git, which has no repository.
Since 5d7fd6d we run the perf tests as part of "make
profile". Therefore "make profile" fails out of the box on
released tarballs of v2.1.0.
We can fix this by making the perf tests optional; if they
are skipped, we still run the regular test suite, which
should give a lot of profile data (and is what we used to do
prior to 5d7fd6d anyway).
Signed-off-by: Jeff King <peff@peff.net> Acked-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
make config --add behave correctly for empty and NULL values
Currently if we have a config file like,
[foo]
baz
bar =
and we try something like, "git config --add foo.baz roll", Git will
segfault. Moreover, for "git config --add foo.bar roll", it will
overwrite the original value instead of appending after the existing
empty value.
The problem lies with the regexp used for simulating --add in
`git_config_set_multivar_in_file()`, "^$", which in ideal case should
not match with any string but is true for empty strings. Instead use a
regexp like "a^" which can not be true for any string, empty or not.
For removing the segfault add a check for NULL values in `matches()` in
config.c.
Signed-off-by: Tanay Abhra <tanayabh@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Noticed-by: Matthew Flaschen <mflaschen@wikimedia.org> Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The helper function test_i18ngrep pretends that it found the expected
results when it is running under GETTEXT_POISON. For this reason, it must
not be used negated like so
! test_i18ngrep foo bar
because the test case would fail under GETTEXT_POISON. The function offers
a special syntax to test that a pattern is *not* found:
test_i18ngrep ! foo bar
Convert incorrect uses to this syntax.
Signed-off-by: Johannes Sixt <j6t@kdbg.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
unpack-trees: use 'cuddled' style for if-else cascade
Match the predominant style in git by following K&R style for if/else
cascades. Documentation/CodingStyle from linux.git explains:
Note that the closing brace is empty on a line of its own, _except_ in
the cases where it is followed by a continuation of the same statement,
ie a "while" in a do-statement or an "else" in an if-statement, like
this:
if (x == y) {
..
} else if (x > y) {
...
} else {
....
}
Rationale: K&R.
Also, note that this brace-placement also minimizes the number of empty
(or almost empty) lines, without any loss of readability.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the 'if (current)' block of twoway_merge, we handle the boring
errors by checking if the entry from the old tree, current index, and
new tree are present, to get a pathname for the error message from one
of them:
if (oldtree)
return o->gently ? -1 : reject_merge(oldtree, o);
if (current)
return o->gently ? -1 : reject_merge(current, o);
if (newtree)
return o->gently ? -1 : reject_merge(newtree, o);
return -1;
Since this is guarded by 'if (current)', the second test is guaranteed
to succeed. Moreover, any of the three entries, if present, would
have the same path because there is no rename detection in this code
path. Even if some day in the future the entries' paths differ, the
'current' path used in the index and worktree would presumably be the
most recognizable for the end user.
Simplify by just using 'current'.
Noticed by coverity, Id:290002
Signed-off-by: Stefan Beller <stefanbeller@gmail.com> Improved-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Documentation/git-rebase.txt: -f forces a rebase that would otherwise be a no-op
"Current branch is a descendant of the commit you are rebasing onto"
does not necessarily mean "rebase" requires "--force". For a plain
vanilla "history flattening" rebase, the rebase can be done without
forcing if there is a merge between the tip of the branch being
rebased and the commit you are rebasing onto, even if the tip is
descendant of the other.
[jc: reworded both the text and the log description]
Signed-off-by: Sergey Organov <sorganov@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
pack-objects: turn off bitmaps when we see --shallow lines
Reachability bitmaps do not work with shallow operations,
because they cache a view of the object reachability that
represents the true objects. Whereas a shallow repository
(or a shallow operation in a repository) is inherently
cutting off the object graph with a graft.
We explicitly disallow the use of bitmaps in shallow
repositories by checking is_repository_shallow(), and we
should continue to do that. However, we also want to
disallow bitmaps when we are serving a fetch to a shallow
client, since we momentarily take on their grafted view of
the world.
It used to be enough to call is_repository_shallow at the
start of pack-objects. Upload-pack wrote the other side's
shallow state to a temporary file and pointed the whole
pack-objects process at this state with "git --shallow-file",
and from the perspective of pack-objects, we really were
in a shallow repo. But since b790e0f (upload-pack: send
shallow info over stdin to pack-objects, 2014-03-11), we do
it differently: we send --shallow lines to pack-objects over
stdin, and it registers them itself.
This means that our is_repository_shallow check is way too
early (we have not been told about the shallowness yet), and
that it is insufficient (calling is_repository_shallow is
not enough, as the shallow grafts we register do not change
its return value). Instead, we can just turn off bitmaps
explicitly when we see these lines.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
read-cache: check for leading symlinks when refreshing index
Don't add paths with leading symlinks to the index while refreshing; we
only track those symlinks themselves. We already ignore them while
preloading (see read_index_preload.c).
Reported-by: Nikolay Avdeev <avdeev@math.vsu.ru> Signed-off-by: Rene Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
In commit c9a42c4 (bundle: allow rev-list options to exclude annotated
tags, 2009-01-02), support for excluding annotated tags outside the
specified date range was added. However, the wrong order of parameters
was chosen when calling memchr().
Fix this by swapping the character to search for with the maximum length
parameter. Also cover this behavior with an additional test.
Signed-off-by: Lukas Fleischer <git@cryptocrack.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Whitespace breakages are checked while the patch is being parsed.
Disable them at the beginning of parse_chunk(), where each
individual patch is parsed, immediately after we learn the name of
the file the patch applies to and before we start parsing the diff
contained in the patch.
One may naively think that we should be able to not just skip the
whitespace checks but simply fast-forward to the next patch without
doing anything once use_patch() tells us that this patch is not
going to be used. But in reality we cannot really skip much of the
parsing in order to do such a "fast-forward", primarily because
parsing "@@ -k,l +m,n @@" lines and counting the input lines is how
we determine the boundaries of individual patches.
apply: use the right attribute for paths in non-Git patches
We parse each patchfile and find the name of the path the patch
applies to, and then use that name to consult the attribute system
to find the whitespace rules to be used, and also the target file
(either in the working tree or in the index) to replay the changes
against.
Unlike a Git-generated patch, a non-Git patch is taken to have the
pathnames relative to the current working directory. The names
found in such a patch are modified by prepending the prefix by the
prefix_patches() helper function introduced in 56185f49 (git-apply:
require -p<n> when working in a subdirectory., 2007-02-19).
However, this prefixing is done after the patch is fully parsed and
affects only what target files are patched. Because the attributes
are checked against the names found in the patch during the parsing,
not against the final pathname, the whitespace check that is done
during parsing ends up using attributes for a wrong path for non-Git
patches.
Fix this by doing the prefix much earlier, immediately after the
header part of each patch is parsed and we learn the name of the
path the patch affects.