dir-iterator: add flags parameter to dir_iterator_begin
Add the possibility of giving flags to dir_iterator_begin to initialize
a dir-iterator with special options.
Currently possible flags are:
- DIR_ITERATOR_PEDANTIC, which makes dir_iterator_advance abort
immediately in the case of an error, instead of keep looking for the
next valid entry;
- DIR_ITERATOR_FOLLOW_SYMLINKS, which makes the iterator follow
symlinks and include linked directories' contents in the iteration.
These new flags will be used in a subsequent patch.
Also add tests for the flags' usage and adjust refs/files-backend.c to
the new dir_iterator_begin signature.
Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br> Signed-off-by: Junio C Hamano <gitster@pobox.com>
dir_iterator_advance() is a large function with two nested loops. Let's
improve its readability factoring out three functions and simplifying
its mechanics. The refactored model will no longer depend on
level.initialized and level.dir_state to keep track of the iteration
state and will perform on a single loop.
Also, dir_iterator_begin() currently does not check if the given string
represents a valid directory path. Since the refactored model will have
to stat() the given path at initialization, let's also check for this
kind of error and make dir_iterator_begin() return NULL, on failures,
with errno appropriately set. And add tests for this new behavior.
Improve documentation at dir-iteration.h and code comments at
dir-iterator.c to reflect the changes and eliminate possible
ambiguities.
Finally, adjust refs/files-backend.c to check for now possible
dir_iterator_begin() failures.
Original-patch-by: Daniel Ferreira <bnmvco@gmail.com> Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change warning(..., strerror(errno)) by warning_errno(...). This helps
to unify warning display besides simplifying a bit the code. Also,
improve warning messages by surrounding paths with quotation marks and
using more meaningful statements.
Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Create t/helper/test-dir-iterator.c, which prints relevant information
about a directory tree iterated over with dir-iterator.
Create t/t0066-dir-iterator.sh, which tests that dir-iterator does
iterate through a whole directory tree as expected.
Signed-off-by: Daniel Ferreira <bnmvco@gmail.com>
[matheus.bernardino: update to use test-tool and some minor aesthetics] Helped-by: Matheus Tavares <matheus.bernardino@usp.br> Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br> Signed-off-by: Junio C Hamano <gitster@pobox.com>
clone: better handle symlinked files at .git/objects/
There is currently an odd behaviour when locally cloning a repository
with symlinks at .git/objects: using --no-hardlinks all symlinks are
dereferenced but without it, Git will try to hardlink the files with the
link() function, which has an OS-specific behaviour on symlinks. On OSX
and NetBSD, it creates a hardlink to the file pointed by the symlink
whilst on GNU/Linux, it creates a hardlink to the symlink itself.
On Manjaro GNU/Linux:
$ touch a
$ ln -s a b
$ link b c
$ ls -li a b c
155 [...] a
156 [...] b -> a
156 [...] c -> a
It's not good to have the result of a local clone to be OS-dependent and
besides that, the current behaviour on GNU/Linux may result in broken
symlinks. So let's standardize this by making the hardlinks always point
to dereferenced paths, instead of the symlinks themselves. Also, add
tests for symlinked files at .git/objects/.
Note: Git won't create symlinks at .git/objects itself, but it's better
to handle this case and be friendly with users who manually create them.
Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br> Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Co-authored-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
clone: test for our behavior on odd objects/* content
Add tests for what happens when we perform a local clone on a repo
containing odd files at .git/object directory, such as symlinks to other
dirs, or unknown files.
I'm bending over backwards here to avoid a SHA-1 dependency. See [1]
for an earlier and simpler version that hardcoded SHA-1s.
This behavior has been the same for a *long* time, but hasn't been
tested for.
There's a good post-hoc argument to be made for copying over unknown
things, e.g. I'd like a git version that doesn't know about the
commit-graph to copy it under "clone --local" so a newer git version
can make use of it.
In follow-up commits we'll look at changing some of this behavior, but
for now, let's just assert it as-is so we'll notice what we'll change
later.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
[matheus.bernardino: improved and split tests in more than one patch] Helped-by: Matheus Tavares <matheus.bernardino@usp.br> Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jk/unused-params-final-batch:
verify-commit: simplify parameters to run_gpg_verify()
show-branch: drop unused parameter from show_independent()
rev-list: drop unused void pointer from finish_commit()
remove_all_fetch_refspecs(): drop unused "remote" parameter
receive-pack: drop unused "commands" from prepare_shallow_update()
pack-objects: drop unused rev_info parameters
name-rev: drop unused parameters from is_better_name()
mktree: drop unused length parameter
wt-status: drop unused status parameter
read-cache: drop unused parameter from threaded load
clone: drop dest parameter from copy_alternates()
submodule: drop unused prefix parameter from some functions
builtin: consistently pass cmd_* prefix to parse_options
cmd_{read,write}_tree: rename "unused" variable that is used
The "--base" option of "format-patch" computed the patch-ids for
prerequisite patches in an unstable way, which has been updated to
compute in a way that is compatible with "git patch-id --stable".
* sb/format-patch-base-patch-id-fix:
format-patch: make --base patch-id output stable
format-patch: inform user that patch-id generation is unstable
A relative pathname given to "git init --template=<path> <repo>"
ought to be relative to the directory "git init" gets invoked in,
but it instead was made relative to the repository, which has been
corrected.
* nd/init-relative-template-fix:
init: make --template path relative to $CWD
Since "git send-email" learned to take 'auto' as the value for the
transfer-encoding, it by mistake stopped honoring the values given
to the configuration variables sendemail.transferencoding and/or
sendemail.<ident>.transferencoding. This has been corrected to
(finally) redoing the order of setting the default, reading the
configuration and command line options.
* ab/send-email-transferencoding-fix:
send-email: fix regression in sendemail.identity parsing
send-email: document --no-[to|cc|bcc]
send-email: fix broken transferEncoding tests
send-email: remove cargo-culted multi-patch pattern in tests
send-email: do defaults -> config -> getopt in that order
send-email: rename the @bcclist variable for consistency
send-email: move the read_config() function above getopts
merge-recursive: restore accidentally dropped setting of path
In commit 8daec1df03de ("merge-recursive: switch from (oid,mode) pairs
to a diff_filespec", 2019-04-05), we actually switched from
(oid,mode,path) triplets to a diff_filespec -- but most callsites in the
patch only needed to worry about oid and mode so the commit message
focused on that. The oversight in the commit message apparently spilled
over to the code as well; one of the dozen or so callsites accidentally
dropped the setting of the path in the conversion. Restore the path
setting in that location.
Also, this pointed out that our testsuite was lacking a good rename/add
test, at least one that involved the need for merge content with the
rename. Add such a test, and since rename/add vs. add/rename could
possibly be important, redo the merge the opposite direction to make
sure we don't have issues with the direction of the merge. These
testcases failed before restoring the setting of path, but with the
paths appropriately set the testcases both pass.
Reported-by: Ben Humphreys <behumphreys@atlassian.com> Based-on-patch-by: SZEDER Gábor <szeder.dev@gmail.com> Tested-by: Ben Humphreys <behumphreys@atlassian.com> Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* 'master' of git://git.kernel.org/pub/scm/git/git:
Git 2.22-rc3
i18n: fix typos found during l10n for git 2.22.0
RelNotes: minor typo fixes in 2.22.0 draft
list-objects-filter: disable 'sparse:path' filters
Fix two typos introduced by the following commits:
+ 31fba9d3b4 (diff-parseopt: convert --[src|dst]-prefix, 2019-03-24)
+ ed8b4132c8 (remote-curl: mark all error messages for translation,
2019-03-05)
Signed-off-by: Jiang Xin <worldhello.net@gmail.com> Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
A bit more leftover clean-up to deprepcate "rebase -p".
* js/rebase-deprecate-preserve-merges:
rebase docs: recommend `-r` over `-p`
docs: say that `--rebase=preserve` is deprecated
tests: mark a couple more test cases as requiring `rebase -p`
A brown-paper-bag bugfix to a change already in 'master'.
* nd/diff-parseopt:
parse-options: check empty value in OPT_INTEGER and OPT_ABBREV
diff-parseopt: restore -U (no argument) behavior
diff-parseopt: correct variable types that are used by parseopt
If someone wants to use as a filter a sparse file that is in the
repository, something like "--filter=sparse:oid=<ref>:<path>"
already works.
So 'sparse:path' is only interesting if the sparse file is not in
the repository. In this case though the current implementation has
a big security issue, as it makes it possible to ask the server to
read any file, like for example /etc/password, and to explore the
filesystem, as well as individual lines of files.
If someone is interested in using a sparse file that is not in the
repository as a filter, then at the minimum a config option, such
as "uploadpack.sparsePathFilter", should be implemented first to
restrict the directory from which the files specified by
'sparse:path' can be read.
For now though, let's just disable 'sparse:path' filters.
Helped-by: Matthew DeVore <matvore@google.com> Helped-by: Jeff Hostetler <git@jeffhostetler.com> Signed-off-by: Christian Couder <chriscool@tuxfamily.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
parse-options: check empty value in OPT_INTEGER and OPT_ABBREV
When parsing the argument for OPT_INTEGER and OPT_ABBREV, we check if we
can parse the entire argument to a number with "if (*s)". There is one
missing check: if "arg" is empty to begin with, we fail to notice.
This could happen with long option by writing like
git diff --inter-hunk-context= blah blah
Before 16ed6c97cc (diff-parseopt: convert --inter-hunk-context,
2019-03-24), --inter-hunk-context is handled by a custom parser
opt_arg() and does detect this correctly.
This restores the bahvior for --inter-hunk-context and make sure all
other integer options are handled the same (sane) way. For OPT_ABBREV
this is new behavior. But it makes it consistent with the rest.
PS. OPT_MAGNITUDE has similar code but git_parse_ulong() does detect
empty "arg". So it's good to go.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Before d473e2e0e8 (diff.c: convert -U|--unified, 2019-01-27), -U and
--unified are implemented with a custom parser opt_arg() in diff.c. I
didn't check this code carefully and not realize that it's the
equivalent of PARSE_OPT_NONEG | PARSE_OPT_OPTARG.
In other words, if -U is specified without any argument, the option
should be accepted, and the default value should be used. Without
PARSE_OPT_OPTARG, parse_options() will reject this case and cause a
regression.
Reported-by: Bryan Turner <bturner@atlassian.com> Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
diff-parseopt: correct variable types that are used by parseopt
Most number-related OPT_ macros store the value in an 'int'
variable. Many of the variables in 'struct diff_options' have a
different type, but during the conversion to using parse_options() I
failed to notice and correct.
The problem was reported on s360x which is a big-endian
architechture. The variable to store '-w' option in this case is
xdl_opts, 'long' type, 8 bytes. But since parse_options() assumes
'int' (4 bytes), it will store bits in the wrong part of xdl_opts. The
problem was found on little-endian platforms because parse_options()
will accidentally store at the right part of xdl_opts.
There aren't much to say about the type change (except that 'int' for
xdl_opts should still be big enough, since Windows' long is the same
size as 'int' and nobody has complained so far). Some safety checks may
be implemented in the future to prevent class of bugs.
Reported-by: Todd Zullinger <tmz@pobox.com> Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
send-email: fix regression in sendemail.identity parsing
Fix a regression in my recent 3494dfd3ee ("send-email: do defaults ->
config -> getopt in that order", 2019-05-09). I missed that the
$identity variable needs to be extracted from the command-line before
we do the config reading, as it determines which config variable we
should read first. See [1] for the report.
The sendemail.identity feature was added back in 34cc60ce2b ("send-email: Add support for SSL and SMTP-AUTH",
2007-09-03), there were no tests to assert that it worked properly.
So let's fix both the regression, and add some tests to assert that
this is being parsed properly. While I'm at it I'm adding a
--no-identity option to go with --[to|cc|bcc] variable, since the
semantics are similar. It's like to/cc/bcc except that unlike those we
don't support multiple identities, but we could now easily add it
support for it if anyone cares.
In just fixing the --identity command-line parsing bug I discovered
that a narrow fix to that wouldn't do. In read_config() we had a state
machine that would only set config values if they weren't set already,
and thus by proxy we wouldn't e.g. set "to" based on sendemail.to if
we'd seen sendemail.gmail.to before, with --identity=gmail.
I'd modified some of the relevant code in 3494dfd3ee, but just
reverting to that wouldn't do, since it would bring back the
regression fixed in that commit.
Refactor read_config() do what we actually mean here. We don't want to
set a given sendemail.VAR if a sendemail.$identity.VAR previously set
it. The old code was conflating this desire with the hardcoded
defaults for these variables, and as discussed in 3494dfd3ee that was
never going to work. Instead pass along the state of whether an
identity config set something before, as distinguished from the state
of the default just being false, or the default being a non-bool or
true (e.g. --transferencoding).
I'm still not happy with the test coverage here, e.g. there's nothing
testing sendemail.smtpEncryption, but I only have so much time to fix
this code.
As of Git v2.22.0, the `--preserve-merges` backend of `git rebase` will
be officially deprecated in favor of the `--rebase-merges` backend.
Consequently, `git pull --rebase=preserve` will also be deprected. State
this explicitly.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
tests: mark a couple more test cases as requiring `rebase -p`
The `--preserve-merges` option has been deprecated, and as a consequence
we started to mark test cases that require that option to be supported,
in preparation for removing that support eventually.
Since we marked those test cases, a couple more crept into the test
suite, and with this patch, we mark them, too.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, if any server options are specified during a protocol v2
fetch, server options will be sent before "command=fetch". Write server
options to the request buffer in send_fetch_request() so that the
components of the request are sent in the correct order.
The protocol documentation states that the command must come first. The
Git server implementation in serve.c (see process_request() in that
file) tolerates any order of command and capability, which is perhaps
why we haven't noticed this. This was noticed when testing against a
JGit server implementation, which follows the documentation in this
regard.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com> Acked-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
rebase: replace incorrect logical negation by correct bitwise one
In bff014dac7d9 (builtin rebase: support the `verbose` and `diffstat`
options, 2018-09-04), we added a line that wanted to remove the
`REBASE_DIFFSTAT` bit from the flags, but it used an incorrect negation.
Found by Coverity.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
progress: avoid empty line when breaking the progress line
Since commit 545dc345eb (progress: break too long progress bar lines,
2019-04-12) when splitting a too long progress line, sometimes it
looks as if a superfluous empty line were added between the title
line and the counters.
To make sure that the previously displayed progress line is completely
covered up when writing the new, shorter title line, we calculate how
many characters need to be overwritten with spaces. Alas, this
calculation doesn't account for the newline character at the end of
the new title line, and resulted in printing one more space than
strictly necessary. This extra space character doesn't matter, if the
length of the previous progress line was shorter than the width of the
terminal. However, if the previous line matched the terminal width,
then this extra space made the new line longer, effectively adding
that empty line after the title line.
Fix this off-by-one to avoid that spurious empty line.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
trace2: document the supported values of GIT_TRACE2* env variables
The descriptions of the GIT_TRACE2* environment variables link to the
technical docs for further details on the supported values. However,
a link like this only really works if the docs are viewed in a browser
and the full documentation is available. OTOH, in 'man git' there are
no links to conveniently click on, and distro-shipped git packages
tend to include only the man pages, while the technical docs and the
docs in html format are in a separate 'git-doc' package.
So let's describe the supported values to make the manpage more
self-contained, but still keep the references to the technical docs
because the details of the SID, and the JSON and perf output formats
are definitely beyond the scope of 'man git'.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
trace2: rename environment variables to GIT_TRACE2*
For an environment variable that is supposed to be set by users, the
GIT_TR2* env vars are just too unclear, inconsistent, and ugly.
Most of the established GIT_* environment variables don't use
abbreviations, and in case of the few that do (GIT_DIR,
GIT_COMMON_DIR, GIT_DIFF_OPTS) it's quite obvious what the
abbreviations (DIR and OPTS) stand for. But what does TR stand for?
Track, traditional, trailer, transaction, transfer, transformation,
transition, translation, transplant, transport, traversal, tree,
trigger, truncate, trust, or ...?!
The trace2 facility, as the '2' suffix in its name suggests, is
supposed to eventually supercede Git's original trace facility. It's
reasonable to expect that the corresponding environment variables
follow suit, and after the original GIT_TRACE variables they are
called GIT_TRACE2; there is no such thing is 'GIT_TR'.
All trace2-specific config variables are, very sensibly, in the
'trace2' section, not in 'tr2'.
OTOH, we don't gain anything at all by omitting the last three
characters of "trace" from the names of these environment variables.
So let's rename all GIT_TR2* environment variables to GIT_TRACE2*,
before they make their way into a stable release.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
There appears to be a bug in the toolchain generating manpages from
lettered lists. When a list is enumerated with letters, the resulting
nroff shows numbers instead. Mostly this is harmless, but in the case of
gitsubmodules, the paragraph following the list refers back to each
bullet by letter. As a result, reading this documentation via `man
gitsubmodules` is hard to parse - readers must infer that a bug exists
and a refers to 1, b refers to 2, and c refers to 3 in the list above.
The problem specifically was introduced in ad47194; previously rather
than generating numerated lists the bulleted area was entirely
monospaced in HTML and shown in plaintext in nroff.
The bug seems to exist in docbook-xml - I've reported it on May 1 via
the docbook-apps mail list - but for now it may make more sense to just
work around the issue.
Signed-off-by: Emily Shaffer <emilyshaffer@google.com> Reviewed-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The fsmonitor interface got out of sync after the in-core index
file gets discarded, which has been corrected.
* js/fsmonitor-refresh-after-discarding-index:
fsmonitor: force a refresh after the index was discarded
fsmonitor: demonstrate that it is not refreshed after discard_index()
To run tests for Git SVN, our scripts for CI used to install the
git-svn package (in the hope that it would bring in the right
dependencies). This has been updated to install the more direct
dependency, namely, libsvn-perl.
* sg/ci-libsvn-perl:
ci: install 'libsvn-perl' instead of 'git-svn'
On a filesystem like HFS+, the names of the refs stored as filesystem
entities may become different from what the end-user expects, just
like files in the working tree get "renamed". Work around the
mismatch by paying attention to the core.precomposeUnicode
configuration.
* en/unicode-in-refnames:
Honor core.precomposeUnicode in more places
Update "git difftool" and "git mergetool" so that the combinations
of {diff,merge}.{tool,guitool} configuration variables serve as
fallback settings of each other in a sensible order.
* dl/difftool-mergetool:
difftool: fallback on merge.guitool
difftool: make --gui, --tool and --extcmd mutually exclusive
mergetool: fallback to tool when guitool unavailable
mergetool--lib: create gui_mode function
mergetool: use get_merge_tool function
t7610: add mergetool --gui tests
t7610: unsuppress output
Attempt to use an abbreviated option in "git clone --recurs" is
responded by a request to disambiguate between --recursive and
--recurse-submodules, which is bad because these two are synonyms.
The parse-options API has been extended to define such synonyms
more easily and not produce an unnecessary failure.
* nd/parse-options-aliases:
parse-options: don't emit "ambiguous option" for aliases
"git branch new A...B" and "git checkout -b new A...B" have been
taught that in their contexts, the notation A...B means "the merge
base between these two commits", just like "git checkout A...B"
detaches HEAD at that commit.
* dl/branch-from-3dot-merge-base:
branch: make create_branch accept a merge base rev
t2018: cleanup in current test