Don't duplicate the indentation string if we're not going to use it.
This was found with asan.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk> Reviewed-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
diff --color-moved-ws: fix out of bounds string access
When adjusting the start of the string to take account of the change
in indentation the code was not checking that the string being
adjusted was in fact longer than the indentation change. This was
detected by asan.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk> Reviewed-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
results in a crash due to a double free. This happens when two
potential moved blocks start with consecutive lines. As
pmb_advance_or_null_multi_match() advances it copies the ws_delta from
the last matching line to the next. When the first of our consecutive
lines is advanced its ws_delta well be copied to the second,
overwriting the ws_delta of the block containing the second line. Then
when the second line is advanced it will copy the new ws_delta to the
line below it and so on. Eventually one of these blocks will stop
matching and the ws_delta will be freed. From then on the other block
is in a use-after-free state and when it stops matching it will try to
free the ws_delta that has already been freed by the other block.
The solution is to store the ws_delta in the array of potential moved
blocks rather than with the lines. This means that it no longer needs
to be copied around and one block cannot overwrite the ws_delta of
another. Additionally it saves some malloc/free calls as we don't keep
allocating and freeing ws_deltas.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk> Reviewed-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git add ':(attr:foo)'" is not supported and is supposed to be
rejected while the command line arguments are parsed, but we fail
to reject such a command line upfront.
* nd/attr-pathspec-fix:
add: do not accept pathspec magic 'attr'
When fsmonitor is in use, after operation on submodules updates
.gitmodules, we lost track of the fact that we did so and relied on
stale fsmonitor data.
* bp/mv-submodules-with-fsmonitor:
git-mv: allow submodules and fsmonitor to work together
"git rebase -i" did not clear the state files correctly when a run
of "squash/fixup" is aborted and then the user manually amended the
commit instead, which has been corrected.
* js/rebase-i-autosquash-fix:
rebase -i: be careful to wrap up fixup/squash chains
rebase -i --autosquash: demonstrate a problem skipping the last squash
The can_all_from_reach_with_flag() method uses 'assign_flag' as a
value we can use to mark objects temporarily during our commit walk.
The intent is that these flags are removed from all objects before
returning. However, this is not the case.
The 'from' array could also contain objects that are not commits, and
we mark those objects with 'assign_flag'. Add a loop to the 'cleanup'
section that removes these markers.
Also, we forgot to free() the memory for 'list', so add that to the
'cleanup' section.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The can_all_from_reach_with_flag() algorithm was refactored in 4fbcca4e
"commit-reach: make can_all_from_reach... linear" but incorrectly
assumed that all objects provided were commits. During a fetch
negotiation, ok_to_give_up() in upload-pack.c may provide unpeeled tags
to the 'from' array. The current code creates a segfault.
Add a direct call to can_all_from_reach_with_flag() in 'test-tool reach'
and add a test in t6600-test-reach.sh that demonstrates this segfault.
Correct the issue by peeling tags when investigating the initial list
of objects in the 'from' array.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit b0db704652 (pathspec: allow querying for attributes -
2017-03-13) adds new pathspec magic 'attr' but only with
match_pathspec(). "git add" has some pathspec related code that still
does not know about 'attr' and will bail out:
A better solution would be making this code support 'attr'. But I
don't know how much work is needed (I'm not familiar with this new
magic). For now, let's simply reject this magic with a friendlier
message:
$ git add ':(attr:foo)'
fatal: :(attr:foo): pathspec magic not supported by this command: 'attr'
Update t6135 so that the expected error message is from the
"graceful" rejection codepath, not "oops, we were supposed to reject
the request to trigger this magic" codepath.
Reported-by: smaudet@sebastianaudet.com Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The rules used by "git push" and "git fetch" to determine if a ref
can or cannot be updated were inconsistent; specifically, fetching
to update existing tags were allowed even though tags are supposed
to be unmoving anchoring points. "git fetch" was taught to forbid
updates to existing tags without the "--force" option.
This is a backward incompatible change but in a good way; it may
still need to be treated carefully.
* ab/fetch-tags-noclobber:
fetch doc: correct grammar in --force docs
push doc: add spacing between two words
"git checkout -b newbranch [HEAD]" should not have to do as much as
checking out a commit different from HEAD. An attempt is made to
optimize this special case.
* bp/checkout-new-branch-optim:
config doc: add missing list separator for checkout.optimizeNewBranch
Correct a grammar error (saying "the receiving" made no sense) in the
recently landed documentation added in my 0bc8d71b99 ("fetch: stop
clobbering existing tags without --force", 2018-08-31) by rephrasing
the sentence. Also correct 'fetching work the same way' by s/work/&s/;
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
config doc: add missing list separator for checkout.optimizeNewBranch
The documentation added in fa655d8411 ("checkout: optimize "git
checkout -b <new_branch>"", 2018-08-16) didn't add the double-colon
needed for the labeled list separator, as a result the added
documentation all got squashed into one paragraph. Fix that by adding
the list separator.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The rules used by "git push" and "git fetch" to determine if a ref
can or cannot be updated were inconsistent; specifically, fetching
to update existing tags were allowed even though tags are supposed
to be unmoving anchoring points. "git fetch" was taught to forbid
updates to existing tags without the "--force" option.
* ab/fetch-tags-noclobber:
fetch: stop clobbering existing tags without --force
fetch: document local ref updates with/without --force
push doc: correct lies about how push refspecs work
push doc: move mention of "tag <tag>" later in the prose
push doc: remove confusing mention of remote merger
fetch tests: add a test for clobbering tag behavior
push tests: use spaces in interpolated string
push tests: make use of unused $1 in test description
fetch: change "branch" to "reference" in --force -h output
Fix a bug in which the same path could be registered under multiple
worktree entries if the path was missing (for instance, was removed
manually). Also, as a convenience, expand the number of cases in
which --force is applicable.
* es/worktree-forced-ops-fix:
doc-diff: force worktree add
worktree: delete .git/worktrees if empty after 'remove'
worktree: teach 'remove' to override lock when --force given twice
worktree: teach 'move' to override lock when --force given twice
worktree: teach 'add' to respect --force for registered but missing path
worktree: disallow adding same path multiple times
worktree: prepare for more checks of whether path can become worktree
worktree: generalize delete_git_dir() to reduce code duplication
worktree: move delete_git_dir() earlier in file for upcoming new callers
worktree: don't die() in library function find_worktree()
Malformed or crafted data in packstream can make our code attempt
to read or write past the allocated buffer and abort, instead of
reporting an error, which has been fixed.
* jk/patch-corrupted-delta-fix:
t5303: use printf to generate delta bases
patch-delta: handle truncated copy parameters
patch-delta: consistently report corruption
patch-delta: fix oob read
t5303: test some corrupt deltas
test-delta: read input into a heap buffer
* jk/pack-objects-with-bitmap-fix:
pack-bitmap: drop "loaded" flag
traverse_bitmap_commit_list(): don't free result
t5310: test delta reuse with bitmaps
bitmap_has_sha1_in_uninteresting(): drop BUG check
spatch transformation to replace boolean uses of !hashcmp() to
newly introduced oideq() is added, and applied, to regain
performance lost due to support of multiple hash algorithms.
* jk/cocci:
show_dirstat: simplify same-content check
read-cache: use oideq() in ce_compare functions
convert hashmap comparison functions to oideq()
convert "hashcmp() != 0" to "!hasheq()"
convert "oidcmp() != 0" to "!oideq()"
convert "hashcmp() == 0" to hasheq()
convert "oidcmp() == 0" to oideq()
introduce hasheq() and oideq()
coccinelle: use <...> for function exclusion
"git format-patch" learned a new "--range-diff" option to explain
the difference between this version and the previous attempt in
the cover letter (or after the tree-dashes as a comment).
* es/format-patch-rangediff:
format-patch: allow --range-diff to apply to a lone-patch
format-patch: add --creation-factor tweak for --range-diff
format-patch: teach --range-diff to respect -v/--reroll-count
format-patch: extend --range-diff to accept revision range
format-patch: add --range-diff option to embed diff in cover letter
range-diff: relieve callers of low-level configuration burden
range-diff: publish default creation factor
range-diff: respect diff_option.file rather than assuming 'stdout'
"git format-patch" learned a new "--interdiff" option to explain
the difference between this version and the previous atttempt in
the cover letter (or after the tree-dashes as a comment).
* es/format-patch-interdiff:
format-patch: allow --interdiff to apply to a lone-patch
log-tree: show_log: make commentary block delimiting reusable
interdiff: teach show_interdiff() to indent interdiff
format-patch: teach --interdiff to respect -v/--reroll-count
format-patch: add --interdiff option to embed diff in cover letter
format-patch: allow additional generated content in make_cover_letter()
Lift code from GitHub to restrict delta computation so that an
object that exists in one fork is not made into a delta against
another object that does not appear in the same forked repository.
* cc/delta-islands:
pack-objects: move 'layer' into 'struct packing_data'
pack-objects: move tree_depth into 'struct packing_data'
t5320: tests for delta islands
repack: add delta-islands support
pack-objects: add delta-islands support
pack-objects: refactor code into compute_layer_order()
Add delta-islands.{c,h}
"git interpret-trailers" and its underlying machinery had a buggy
code that attempted to ignore patch text after commit log message,
which triggered in various codepaths that will always get the log
message alone and never get such an input.
* jk/trailer-fixes:
append_signoff: use size_t for string offsets
sequencer: ignore "---" divider when parsing trailers
pretty, ref-filter: format %(trailers) with no_divider option
interpret-trailers: allow suppressing "---" divider
interpret-trailers: tighten check for "---" patch boundary
trailer: pass process_trailer_opts to trailer_info_get()
trailer: use size_t for iterating trailer list
trailer: use size_t for string offsets
The color output support for recently introduced "range-diff"
command got tweaked a bit.
* sb/range-diff-colors:
range-diff: indent special lines as context
range-diff: make use of different output indicators
diff.c: add --output-indicator-{new, old, context}
diff.c: rewrite emit_line_0 more understandably
diff.c: omit check for line prefix in emit_line_0
diff: use emit_line_0 once per line
diff.c: add set_sign to emit_line_0
diff.c: reorder arguments for emit_line_ws_markup
diff.c: simplify caller of emit_line_0
t3206: add color test for range-diff --dual-color
test_decode_color: understand FAINT and ITALIC
When creating a thin pack, which allows objects to be made into a
delta against another object that is not in the resulting pack but
is known to be present on the receiving end, the code learned to
take advantage of the reachability bitmap; this allows the server
to send a delta against a base beyond the "boundary" commit.
* jk/pack-delta-reuse-with-bitmap:
pack-objects: reuse on-disk deltas for thin "have" objects
pack-bitmap: save "have" bitmap from walk
t/perf: add perf tests for fetches from a bitmapped server
t/perf: add infrastructure for measuring sizes
t/perf: factor out percent calculations
t/perf: factor boilerplate out of test_perf
The unpack_trees() API used in checking out a branch and merging
walks one or more trees along with the index. When the cache-tree
in the index tells us that we are walking a tree whose flattened
contents is known (i.e. matches a span in the index), as linearly
scanning a span in the index is much more efficient than having to
open tree objects recursively and listing their entries, the walk
can be optimized, which is done in this topic.
* nd/unpack-trees-with-cache-tree:
Document update for nd/unpack-trees-with-cache-tree
cache-tree: verify valid cache-tree in the test suite
unpack-trees: add missing cache invalidation
unpack-trees: reuse (still valid) cache-tree from src_index
unpack-trees: reduce malloc in cache-tree walk
unpack-trees: optimize walking same trees with cache-tree
unpack-trees: add performance tracing
trace.h: support nested performance tracing
The code for computing history reachability has been shuffled,
obtained a bunch of new tests to cover them, and then being
improved.
* ds/reachable:
commit-reach: correct accidental #include of C file
commit-reach: use can_all_from_reach
commit-reach: make can_all_from_reach... linear
commit-reach: replace ref_newer logic
test-reach: test commit_contains
test-reach: test can_all_from_reach_with_flags
test-reach: test reduce_heads
test-reach: test get_merge_bases_many
test-reach: test is_descendant_of
test-reach: test in_merge_bases
test-reach: create new test tool for ref_newer
commit-reach: move can_all_from_reach_with_flags
upload-pack: generalize commit date cutoff
upload-pack: refactor ok_to_give_up()
upload-pack: make reachable() more generic
commit-reach: move commit_contains from ref-filter
commit-reach: move ref_newer from remote.c
commit.h: remove method declarations
commit-reach: move walk methods from commit.c
"git submodule update" is getting rewritten piece-by-piece into C.
* sb/submodule-update-in-c:
submodule--helper: introduce new update-module-mode helper
submodule--helper: replace connect-gitdir-workingtree by ensure-core-worktree
builtin/submodule--helper: factor out method to update a single submodule
builtin/submodule--helper: store update_clone information in a struct
builtin/submodule--helper: factor out submodule updating
git-submodule.sh: rename unused variables
git-submodule.sh: align error reporting for update mode to use path
Fixes to "git rerere" corner cases, especially when conflict
markers cannot be parsed in the file.
* tg/rerere:
rerere: recalculate conflict ID when unresolved conflict is committed
rerere: teach rerere to handle nested conflicts
rerere: return strbuf from handle path
rerere: factor out handle_conflict function
rerere: only return whether a path has conflicts or not
rerere: fix crash with files rerere can't handle
rerere: add documentation for conflict normalization
rerere: mark strings for translation
rerere: wrap paths in output in sq
rerere: lowercase error messages
rerere: unify error messages when read_cache fails
When there are too many packfiles in a repository (which is not
recommended), looking up an object in these would require
consulting many pack .idx files; a new mechanism to have a single
file that consolidates all of these .idx files is introduced.
* ds/multi-pack-index: (32 commits)
pack-objects: consider packs in multi-pack-index
midx: test a few commands that use get_all_packs
treewide: use get_all_packs
packfile: add all_packs list
midx: fix bug that skips midx with alternates
midx: stop reporting garbage
midx: mark bad packed objects
multi-pack-index: store local property
multi-pack-index: provide more helpful usage info
midx: clear midx on repack
packfile: skip loading index if in multi-pack-index
midx: prevent duplicate packfile loads
midx: use midx in approximate_object_count
midx: use existing midx when writing new one
midx: use midx in abbreviation calculations
midx: read objects from multi-pack-index
config: create core.multiPackIndex setting
midx: write object offsets
midx: write object id fanout chunk
midx: write object ids in a chunk
...
"git rev-list --stdin </dev/null" used to be an error; it now shows
no output without an error. "git rev-list --stdin --default HEAD"
still falls back to the given default when nothing is given on the
standard input.
* jk/rev-list-stdin-noop-is-ok:
rev-list: make empty --stdin not an error
"git checkout -b newbranch [HEAD]" should not have to do as much as
checking out a commit different from HEAD. An attempt is made to
optimize this special case.
Running "git clone" against a project that contain two files with
pathnames that differ only in cases on a case insensitive
filesystem would result in one of the files lost because the
underlying filesystem is incapable of holding both at the same
time. An attempt is made to detect such a case and warn.
* nd/clone-case-smashing-warning:
clone: report duplicate entries on case-insensitive filesystems
Revert "doc/Makefile: drop doc-diff worktree and temporary files on "make clean""
This reverts commit 6f924265a0bf6efa677e9a684cebdde958e5ba06, which
started to require that we have an executable git available in order
to say "make clean", which gives us a chicken-and-egg problem.
Having to have Git installed, or be in a repository, in order to be
able to run an optional "doc-diff" tool is fine. Requiring either
in order to run "make clean" is a different story.
linear-assignment: fix potential out of bounds memory access
Currently the 'compute_assignment()' function may read memory out
of bounds, even if used correctly. Namely this happens when we only
have one column. In that case we try to calculate the initial
minimum cost using '!j1' as column in the reduction transfer code.
That in turn causes us to try and get the cost from column 1 in the
cost matrix, which does not exist, and thus results in an out of
bounds memory read.
In the original paper [1], the example code initializes that minimum
cost to "infinite". We could emulate something similar by setting the
minimum cost to INT_MAX, which would result in the same minimum cost
as the current algorithm, as we'd always go into the if condition at
least once, except when we only have one column, and column_count thus
equals 1.
If column_count does equal 1, the condition in the loop would always
be false, and we'd end up with a minimum of INT_MAX, which may lead to
integer overflows later in the algorithm.
For a column count of 1, we however do not even really need to go
through the whole algorithm. A column count of 1 means that there's
no possible assignments, and we can just zero out the column2row and
row2column arrays, and return early from the function, while keeping
the reduction transfer part of the function the same as it is
currently.
Another solution would be to just not call the 'compute_assignment()'
function from the range diff code in this case, however it's better to
make the compute_assignment function more robust, so future callers
don't run into this potential problem.
Note that the test only fails under valgrind on Linux, but the same
command has been reported to segfault on Mac OS.
[1]: Jonker, R., & Volgenant, A. (1987). A shortest augmenting path
algorithm for dense and sparse linear assignment
problems. Computing, 38(4), 325–340.
Reported-by: ryenus <ryenus@gmail.com> Helped-by: Derrick Stolee <stolee@gmail.com> Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
fetch_objects() currently does not set exact_oid in struct ref when
invoking transport_fetch_refs(). If the server supports ref-in-want,
fetch_pack() uses this field to determine whether a wanted ref should be
requested as a "want-ref" line or a "want" line; without the setting of
exact_oid, the wrong line will be sent.
Set exact_oid, so that the correct line is sent.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are fetch_object() and fetch_objects() helpers in
fetch-object.h; as the latter takes "struct oid_array",
the former cannot be made into a thin wrapper around the
latter without an extra allocation and set-up cost.
Update fetch_objects() to take an array of "struct object_id"
and number of elements in it as separate parameters, remove
fetch_object(), and adjust all existing callers of these
functions to use the new fetch_objects().
Signed-off-by: Jonathan Tan <jonathantanmy@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
sequencer: fix --allow-empty-message behavior, make it smarter
In commit b00bf1c9a8dd ("git-rebase: make --allow-empty-message the
default", 2018-06-27), several arguments were given for transplanting
empty commits without halting and asking the user for confirmation on
each commit. These arguments were incomplete because the logic clearly
assumed the only cases under consideration were transplanting of commits
with empty messages (see the comment about "There are two sources for
commits with empty messages). It didn't discuss or even consider
rewords, squashes, etc. where the user is explicitly asked for a new
commit message and provides an empty one. (My bad, I totally should
have thought about that at the time, but just didn't.)
Rewords and squashes are significantly different, though, as described
by SZEDER:
Let's suppose you start an interactive rebase, choose a commit to
squash, save the instruction sheet, rebase fires up your editor, and
then you notice that you mistakenly chose the wrong commit to
squash. What do you do, how do you abort?
Before [that commit] you could clear the commit message, exit the
editor, and then rebase would say "Aborting commit due to empty
commit message.", and you get to run 'git rebase --abort', and start
over.
But [since that commit, ...] saving the commit message as is would
let rebase continue and create a bunch of unnecessary objects, and
then you would have to use the reflog to return to the pre-rebase
state.
Also, he states:
The instructions in the commit message template, which is shown for
'reword' and 'squash', too, still say...
# Please enter the commit message for your changes. Lines starting
# with '#' will be ignored, and an empty message aborts the commit.
These are sound arguments that when editing commit messages during a
sequencer operation, that if the commit message is empty then the
operation should halt and ask the user to correct. The arguments in
commit b00bf1c9a8dd (referenced above) still apply when transplanting
previously created commits with empty commit messages, so the sequencer
should not halt for those.
Furthermore, all rationale so far applies equally for cherry-pick as for
rebase. Therefore, make the code default to --allow-empty-message when
transplanting an existing commit, and to default to halting when the
user is asked to edit a commit message and provides an empty one -- for
both rebase and cherry-pick.
Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
If passed both --no-deref and --stdin, update-ref would error out with a
general usage message that did not at all suggest these options were
incompatible. The manpage for update-ref did suggest through its
synopsis line that --no-deref and --stdin were incompatible, but it sadly
also incorrectly suggested that -d and --no-deref were incompatible. So
the help around the --no-deref option is buggy in a few ways.
The --stdin option did provide a different mechanism for avoiding
dereferencing symbolic-refs: adding a line reading
option no-deref
before every other directive in the input. (Technically, if the user
wants to do the extra work of first determining which refs they want to
update or delete are symbolic, then they only need to put the extra
"option no-deref" lines before the updates of those refs. But in some
cases, that's more work than just adding the "option no-deref" before
every other directive.)
It's easier to allow the user to just pass --no-deref along with --stdin
in order to tell update-ref that the user doesn't want any symbolic ref
to be dereferenced. It also makes the update-ref documentation simpler.
Implement that, and update the documentation to match.
Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
update-ref: fix type of update_flags variable to match its usage
The ref_transaction_*() family of functions expect a flags parameter
which is of type unsigned int. Make the update_flags variable, which
is passed as that parameter, be of the same type.
Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
git_check_attr() returns always 0.
Remove all the error handling code of the callers, which is never executed.
Change git_check_attr() to be a void function.
Signed-off-by: Torsten Bögershausen <tboegi@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
t0090: disable GIT_TEST_SPLIT_INDEX for the test checking split index
The test 'switching trees does not invalidate shared index' in
't0090-cache-tree.sh' is about verifying the behaviour of the split
index feature, therefore it should be in full control of when index
splitting is performed, like all the tests in 't1700-split-index.sh'.
Unset GIT_TEST_SPLIT_INDEX for this test to avoid unintended random
index splitting.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The commit 40ce4160 "format-patch: allow --range-diff to apply to
a lone-patch" added the ability to see a range-diff as commentary
after the commit message of a single patch series (i.e. [PATCH]
instead of [PATCH X/N]). However, this functionality was not
covered by a test case.
Add a simple test case that checks that a range-diff is written as
commentary to the patch.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
breaks as the fsmonitor data is out of sync with the state of the .gitmodules
file. Update is_staging_gitmodules_ok() so that it no longer tells
ie_match_stat() to ignore refreshing the fsmonitor data.
Reported-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Helped-by: Stefan Beller <sbeller@google.com> Signed-off-by: Ben Peart <benpeart@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Create a test-tool helper to create the server side of
a windows named pipe, wait for a client connection, and
copy data written to the pipe to stdout.
Create t0051 test to route GIT_TRACE output of a command
to a named pipe using the above test-tool helper.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
check_one_conflict() compares `i` to `active_nr` in two places to avoid
buffer overruns, but left out an important third location.
The code did used to have a check here comparing i to active_nr, back
before commit fb70a06da2f1 ("rerere: fix an off-by-one non-bug",
2015-06-28), however the code at the time used an 'if' rather than a
'while' meaning back then that this loop could not have read past the
end of the array, making the check unnecessary and it was removed.
Unfortunately, in commit 5eda906b2873 ("rerere: handle conflicts with
multiple stage #1 entries", 2015-07-24), the 'if' was changed to a
'while' and the check comparing i and active_nr was not re-instated,
leading to this problem.
Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
If there is more than one potential moved block and the longest block
is not the first element of the array of potential blocks then the
block is cut short. With --color-moved=blocks this can leave moved
lines unpainted if the shortened block does not meet the block length
requirement. With --color-moved=zebra then in addition to the
unpainted lines the moved color can change in the middle of a single
block.
Fix this by freeing the whitespace delta of the match we're discarding
rather than the one we're keeping.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk> Acked-by: Stefan Beller <sbeller@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
t3701-add-interactive: tighten the check of trace output
The test 'add -p does not expand argument lists' in
't3701-add-interactive.sh', added in 7288e12cce (add--interactive: do
not expand pathspecs with ls-files, 2017-03-14), checks the GIT_TRACE
of 'git add -p' to ensure that the name of a tracked file wasn't
passed around as argument to any of the commands executed as a result
of undesired pathspec expansion. This check is done with 'grep' using
the filename on its own as the pattern, which is too loose a pattern,
and would match any occurrences of the filename in the trace output,
not just those as command arguments. E.g. if a developer were to
litter the index handling code with trace_printf()s printing, among
other things, the name of the just processed cache entry, then that
pattern would mistakenly match these as well, and would fail the test.
Tighten this 'grep' pattern to only match trace lines that show the
executed commands.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
We currently build cleanly with -Wformat-security, and it's
a good idea to make sure we continue to do so (since calls
that trigger the warning may be security vulnerabilities).
Note that we cannot use the stronger -Wformat-nonliteral, as
there are case where we are clever with passing around
pointers to string literals. E.g., bisect_rev_setup() takes
bad_format and good_format parameters. These ultimately come
from literals, but they still trigger the warning.
Some of these might be fixable (e.g., by passing flags from
which we locally select a format), and might even be worth
fixing (not because of security, but just because it's an
easy mistake to pass the wrong format). But there are other
cases which are likely quite hard to fix (we actually
generate formats in a local buffer in some cases). So let's
punt on that for now and start with -Wformat-security, which
is supposed to catch the most important cases.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
string-list: remove unused function print_string_list
A removal of this helper function was proposed 3 years ago [1]; the
function was never used since it was introduced in 2006 back then,
and there is no new callers since. Now time has proven we really do
not need the function.
Update the config documentation to note the value `2` as an acceptable
value for the protocol.version config.
Signed-off-by: Brandon Williams <bmwill@google.com> Signed-off-by: Josh Steadmon <steadmon@google.com> Reviewed-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The earlier attempt barfed when given a CONTENT_LENGTH that is
set to an empty string. RFC 3875 is fairly clear that in this
case we should not read any message body, but we've been reading
through to the EOF in previous versions (which did not even pay
attention to the environment variable), so keep that behaviour for
now in this late update.
v2.19.0-rc0~165^2~1 (submodule: ensure core.worktree is set after
update, 2018-06-18) assumes an "absorbed" submodule layout, where the
submodule's Git directory is in the superproject's .git/modules/
directory and .git in the submodule worktree is a .git file pointing
there. In particular, it uses $GIT_DIR/modules/$name to find the
submodule to find out whether it already has core.worktree set, and it
uses connect_work_tree_and_git_dir if not, resulting in
fatal: could not open sub/.git for writing
The context behind that patch: v2.19.0-rc0~165^2~2 (submodule: unset
core.worktree if no working tree is present, 2018-06-12) unsets
core.worktree when running commands like "git checkout
--recurse-submodules" to switch to a branch without the submodule. If
a user then uses "git checkout --no-recurse-submodules" to switch back
to a branch with the submodule and runs "git submodule update", this
patch is needed to ensure that commands using the submodule directly
are aware of the path to the worktree.
It is late in the release cycle, so revert the whole 3-patch series.
We can try again later for 2.20.
Reported-by: Allan Sandfeld Jensen <allan.jensen@qt.io> Helped-by: Stefan Beller <sbeller@google.com> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
According to RFC3875, empty environment variable is equivalent to unset,
and for CONTENT_LENGTH it should mean zero body to read.
However, unset CONTENT_LENGTH is also used for chunked encoding to indicate
reading until EOF. At least, the test "large fetch-pack requests can be split
across POSTs" from t5551 starts faliing, if unset or empty CONTENT_LENGTH is
treated as zero length body. So keep the existing behavior as much as possible.
Add a test for the case.
Reported-By: Jelmer Vernooij <jelmer@jelmer.uk> Signed-off-by: Max Kirillov <max@max630.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>