/git-cat-file
/git-check-attr
/git-check-ignore
+/git-check-mailmap
/git-check-ref-format
/git-checkout
/git-checkout-index
Philippe Bruhat <book@cpan.org>
Ralf Thielow <ralf.thielow@gmail.com> <ralf.thielow@googlemail.com>
Ramsay Allan Jones <ramsay@ramsay1.demon.co.uk>
-René Scharfe <rene.scharfe@lsrfire.ath.cx>
+René Scharfe <l.s.r@web.de> <rene.scharfe@lsrfire.ath.cx>
Robert Fitzsimons <robfitz@273k.net>
Robert Shearman <robertshearman@gmail.com> <rob@codeweavers.com>
Robert Zeh <robert.a.zeh@gmail.com>
not exclude them and tried to apply funny patches only to fail.
* "git blame" started missing quite a few changes from the origin
- since we stopped using the diff minimalization by default in v1.7.2
+ since we stopped using the diff minimization by default in v1.7.2
era.
* When PATH contains an unreadable directory, alias expansion code
--------------------
* The single-key mode of "git add -p" was easily fooled into thinking
- that it was told to add everthing ('a') when up-arrow was pressed by
+ that it was told to add everything ('a') when up-arrow was pressed by
mistake.
* Setting a git command that uses custom configuration via "-c var=val"
* The configuration file parser used for sizes (e.g. bigFileThreshold)
did not correctly interpret 'g' suffix.
- * The replacement implemention for snprintf used on platforms with
+ * The replacement implementation for snprintf used on platforms with
native snprintf that is broken did not use va_copy correctly.
* LF-to-CRLF streaming filter replaced all LF with CRLF, which might
- be techinically correct but not friendly to people who are trying
+ be technically correct but not friendly to people who are trying
to recover from earlier mistakes of using CRLF in the repository
data in the first place. It now refrains from doing so for LF that
follows a CR.
* Updates to bash completion scripts.
* The build procedure has been taught to take advantage of computed
- dependency automatically when the complier supports it.
+ dependency automatically when the compiler supports it.
* The date parser now accepts timezone designators that lack minutes
part and also has a colon between "hh:mm".
* Variants of "git cherry-pick" and "git revert" that take multiple
commits learned to "--continue" and "--abort".
- * "git daemon" gives more human readble error messages to clients
+ * "git daemon" gives more human readable error messages to clients
using ERR packets when appropriate.
* Errors at the network layer is logged by "git daemon".
common prefix and suffix between the two filenames overlapped.
* "git submodule update", when recursed into sub-submodules, did not
- acccumulate the prefix paths.
+ accumulate the prefix paths.
* "git am $maildir/" applied messages in an unexpected order; sort
filenames read from the maildir/ in a way that is more likely to
conflicts have been applied.
* "git bundle" did not like a bundle created using a commit without
- any message as its one of the prerequistes.
+ any message as its one of the prerequisites.
Fixes since v1.8.3.2
--------------------
+ * "git apply" parsed patches that add new files, generated by programs
+ other than Git, incorrectly. This is an old breakage in v1.7.11.
+
+ * Older cURL wanted piece of memory we call it with to be stable, but
+ we updated the auth material after handing it to a call.
+
+ * "git pull" into nothing trashed "local changes" that were in the
+ index.
+
+ * Many "git submodule" operations did not work on a submodule at a
+ path whose name is not in ASCII.
+
+ * "cherry-pick" had a small leak in its error codepath.
+
+ * Logic used by git-send-email to suppress cc mishandled names like
+ "A U. Thor" <author@example.xz>, where the human readable part
+ needs to be quoted (the user input may not have the double quotes
+ around the name, and comparison was done between quoted and
+ unquoted strings). It also mishandled names that need RFC2047
+ quoting.
+
* "gitweb" forgot to clear a global variable $search_regexp upon each
request, mistakenly carrying over the previous search to a new one
when used as a persistent CGI.
--- /dev/null
+Git v1.8.3.4 Release Notes
+==========================
+
+This update is mostly to propagate documentation fixes and test
+updates from the master front back to the maintenance track.
+
+Fixes since v1.8.3.3
+--------------------
+
+ * The bisect log listed incorrect commits when bisection ends with
+ only skipped ones.
+
+ * The test coverage framework was left broken for some time.
+
+ * The test suite for HTTP transport did not run with Apache 2.4.
+
+ * "git diff" used to fail when core.safecrlf is set and the working
+ tree contents had mixed CRLF/LF line endings. Committing such a
+ content must be prohibited, but "git diff" should help the user to
+ locate and fix such problems without failing.
Foreign interfaces, subsystems and ports.
+ * Cygwin port has been updated for more recent Cygwin 1.7.
+
* "git rebase -i" now honors --strategy and -X options.
* Git-gui has been updated to its 0.18.0 version.
* git-remote-mw (in contrib/) hints users to check the certificate,
when https:// connection failed.
+ * git-remote-mw (in contrib/) adds a command to allow previewing the
+ contents locally before pushing it out, when working with a
+ MediaWiki remote.
+
UI, Workflows & Features
+ * Sample "post-receive-email" hook script got an enhanced replacement
+ "multimail" (in contrib/).
+
+ * Also in contrib/ is a new "contacts" script that runs "git blame"
+ to find out the people who may be interested in a set of changes.
+
+ * "git clean" command learned an interactive mode.
+
+ * The "--head" option to "git show-ref" was only to add "HEAD" to the
+ list of candidate refs to be filtered by the usual rules
+ (e.g. "--heads" that only show refs under refs/heads). The meaning
+ of the option has been changed to always show "HEAD" regardless of
+ what filtering will be applied to any other ref.
+
+ This is a backward incompatible change and might cause breakages to
+ people's existing scripts.
+
+ * "git show -s" was less discoverable than it should have been. It
+ now has a natural synonym "git show --no-patch".
+
+ * "git check-mailmap" is a new command that lets you map usernames
+ and e-mail addresses through the mailmap mechanism, just like many
+ built-in commands do.
+
+ * "git name-rev" learned to name an annotated tag object back to its
+ tagname; "git name-rev $(git rev-parse v1.0.0)" gives "tags/v1.0.0",
+ for example.
+
+ * "git cat-file --batch-check=<format>" is added, primarily to allow
+ on-disk footprint of objects in packfiles (often they are a lot
+ smaller than their true size, when expressed as deltas) to be
+ reported.
+
+ * "git rebase [-i]" used to leave just "rebase" as its reflog messages
+ for some operations. They have been reworded to be more informative.
+
+ * In addition to the choice from "rebase, merge, or checkout-detach",
+ "submodule update" can allow a custom command to be used in to
+ update the working tree of submodules via the "submodule.*.update"
+ configuration variable.
+
+ * "git submodule update" can optionally clone the submodule
+ repositories shallowly.
+
+ * "git format-patch" learned "--from[=whom]" option, which sets the
+ "From: " header to the specified person (or the person who runs the
+ command, if "=whom" part is missing) and move the original author
+ information to an in-body From: header as necessary.
+
+ * The configuration variable "merge.ff" was cleary a tri-state to
+ choose one from "favor fast-forward when possible", "always create
+ a merge even when the history could fast-forward" and "do not
+ create any merge, only update when the history fast-forwards", but
+ the command line parser did not implement the usual convention of
+ "last one wins, and command line overrides the configuration"
+ correctly.
+
+ * "gitweb" learned to optionally place extra links that point at the
+ levels higher than the Gitweb pages themselves in the breadcrumbs,
+ so that it can be used as part of a larger installation.
+
+ * "git log --format=" now honors i18n.logoutputencoding configuration
+ variable.
+
* The "push.default=simple" mode of "git push" has been updated to
behave like "current" without requiring a remote tracking
information, when you push to a remote that is different from where
directly uses the 40-hex string as an object name, even if a ref
"refs/<some hierarchy>/<name>" exists. This disambiguation order
is unlikely to change, but we should warn about the ambiguity just
- like we warn when more than one refs/ hierachies share the same
+ like we warn when more than one refs/ hierarchies share the same
name.
* "git rebase" learned "--[no-]autostash" option to save local
Performance, Internal Implementation, etc.
+ * On Cygwin, we used to use our own lstat(2) emulation that is
+ allegedly faster than the platform one in codepaths where some of
+ the information it returns did not matter, but it started to bite
+ us in a few codepaths where the trick it uses to cheat does show
+ breakages. This emulation has been removed and we use the native
+ lstat(2) emulation supplied by Cygwin now.
+
+ * The function attributes extensions are used to catch mistakes in
+ use of our own variadic functions that use NULL sentinel at the end
+ (i.e. like execl(3)) and format strings (i.e. like printf(3)).
+
+ * The code to allow configuration data to be read from in-tree blob
+ objects is in. This may help working in a bare repository and
+ submodule updates.
+
+ * Fetching between repositories with many refs employed O(n^2)
+ algorithm to match up the common objects, which has been corrected.
+
* The original way to specify remote repository using .git/branches/
used to have a nifty feature. The code to support the feature was
still in a function but the caller was changed not to call it 5
track are contained in this release (see release notes to them for
details).
+ * Newer Net::SMTP::SSL module does not want the user programs to use
+ the default behaviour to let server certificate go without
+ verification, so by default enable the verification with a
+ mechanism to turn it off if needed.
+ (merge 35035bb rr/send-email-ssl-verify later to maint).
+
+ * When "git" is spawned in such a way that any of the low 3 file
+ descriptors is closed, our first open() may yield file descriptor 2,
+ and writing error message to it would screw things up in a big way.
+ (merge a11c396 tr/protect-low-3-fds later to maint).
+
+ * The mailmap mechanism unnecessarily downcased the e-mail addresses
+ in the output, and also ignored the human name when it is a single
+ character name.
+ (merge bd23794 jc/mailmap-case-insensitivity later to maint).
+
+ * In two places we did not check return value (expected to be a file
+ descriptor) correctly.
+ (merge a77f106 tr/fd-gotcha-fixes later to maint).
+
+ * Logic to auto-detect character encodings in the commit log message
+ did not reject overlong and invalid UTF-8 characters.
+ (merge 81050ac bc/commit-invalid-utf8 later to maint).
+
+ * Pass port number as a separate argument when "send-email" initializes
+ Net::SMTP, instead of as a part of the hostname, i.e. host:port.
+ This allows GSSAPI codepath to match with the hostname given.
+ (merge 1a741bf bc/send-email-use-port-as-separate-param later to maint).
+
* "git diff" refused to even show difference when core.safecrlf is
set to true (i.e. error out) and there are offending lines in the
working tree files.
* "git apply" parsed patches that add new files, generated by
programs other than Git, incorrectly. This is an old breakage in
v1.7.11 and will need to be merged down to the maintanance tracks.
- (merge 212eb96 tr/maint-apply-non-git-patch-parsefix later to maint).
* Older cURL wanted piece of memory we call it with to be stable, but
we updated the auth material after handing it to a call.
- (merge a94cf2c bc/http-keep-memory-given-to-curl later to maint).
* "git pull" into nothing trashed "local changes" that were in the
index, and this avoids it.
- (merge b4dc085 jk/pull-into-dirty-unborn later to maint).
* Many "git submodule" operations do not work on a submodule at a
path whose name is not in ASCII.
- (merge bed9470 fg/submodule-non-ascii-path later to maint).
* "cherry-pick" had a small leak in an error codepath.
- (merge 706728a fc/sequencer-plug-leak later to maint).
* Logic used by git-send-email to suppress cc mishandled names like
"A U. Thor" <author@example.xz>, where the human readable part
around the name, and comparison was done between quoted and
unquoted strings). It also mishandled names that need RFC2047
quoting.
- (merge 1495266 mt/send-email-cc-match-fix later to maint).
* Call to discard_cache/discard_index (used when we use different
contents of the index in-core, in many operations like commit,
* "gitweb" forgot to clear a global variable $search_regexp upon each
request, mistakenly carrying over the previous search to a new one
when used as a persistent CGI.
- (merge ca7a5dc cm/gitweb-project-list-persistent-cgi-fix later to maint).
* The wildmatch engine did not honor WM_CASEFOLD option correctly.
- (merge b79c0c3 ar/wildmatch-foldcase later to maint).
* "git log -c --follow $path" segfaulted upon hitting the commit that
renamed the $path being followed.
- (merge 46ec510 cb/log-follow-with-combined later to maint).
* When a reflog notation is used for implicit "current branch", we
did not say which branch and worse said "branch ''".
- (merge 305ebea rr/die-on-missing-upstream later to maint).
* "difftool --dir-diff" did not copy back changes made by the
end-user in the diff tool backend to the working tree in some
cases.
- (merge 32eaf1d ks/difftool-dir-diff-copy-fix later to maint).
* "git push $there HEAD:branch" did not resolve HEAD early enough, so
it was easy to flip it around while push is still going on and push
out a branch that the user did not originally intended when the
command was started.
- (merge 0f075b2 rr/push-head later to maint).
* The bash prompt code (in contrib/) displayed the name of the branch
being rebased when "rebase -i/-m/-p" modes are in use, but not the
plain vanilla "rebase".
- (merge 1306321 fc/show-branch-in-rebase-am later to maint).
* Handling of negative exclude pattern for directories "!dir" was
broken in the update to v1.8.3.
- (merge c3c327d kb/status-ignored-optim-2 later to maint).
* zsh prompt script that borrowed from bash prompt script did not
work due to slight differences in array variable notation between
these two shells.
- (merge d0583da tg/maint-zsh-svn-remote-prompt later to maint).
* An entry for "file://" scheme in the enumeration of URL types Git
can take in the HTML documentation was made into a clickable link
by mistake.
- (merge 4c32e36 nd/urls-doc-no-file-hyperlink-fix later to maint).
* "git push --[no-]verify" was not documented.
- (merge 90d32d1 tr/push-no-verify-doc later to maint).
* Stop installing the git-remote-testpy script that is only used for
testing.
- (merge 416fda6 fc/makefile later to maint).
* "git commit --allow-empty-message -m ''" should not start an
editor.
- (merge 2520677 rs/commit-m-no-edit later to maint).
* "git merge @{-1}~22" was rewritten to "git merge frotz@{1}~22"
incorrectly when your previous branch was "frotz" (it should be
rewritten to "git merge frotz~22" instead).
- (merge 84cf246 jc/strbuf-branchname-fix later to maint).
* "git diff -c -p" was not showing a deleted line from a hunk when
another hunk immediately begins where the earlier one ends.
- (merge aac3857 mk/combine-diff-context-horizon-fix later to maint).
* "git log --ancestry-path A...B" did not work as expected, as it did
not pay attention to the fact that the merge base between A and B
was the bottom of the range being specified.
- (merge a765499 kb/ancestry-path-threedots later to maint).
* Mac OS X does not like to write(2) more than INT_MAX number of
bytes; work it around by chopping write(2) into smaller pieces.
- (merge 6c642a8 fc/macos-x-clipped-write later to maint).
* Newer MacOS X encourages the programs to compile and link with
their CommonCrypto, not with OpenSSL.
- (merge be4c828 da/darwin later to maint).
* "git clone foo/bar:baz" cannot be a request to clone from a remote
over git-over-ssh specified in the scp style. This case is now
detected and clones from a local repository at "foo/bar:baz".
- (merge 6000334 nd/clone-local-with-colon later to maint).
* When $HOME is misconfigured to point at an unreadable directory, we
used to complain and die. Loosen the check.
- (merge 4698c8f jn/config-ignore-inaccessible later to maint).
* "git subtree" (in contrib/) had one codepath with loose error
checks to lose data at the remote side.
- (merge 3212d56 jk/subtree-do-not-push-if-split-fails later to maint).
* "git fetch" into a shallow repository from a repository that does
not know about the shallow boundary commits (e.g. a different fork
from the repository the current shallow repository was cloned from)
did not work correctly.
- (merge 71d5f93 mh/fetch-into-shallow later to maint).
* "git checkout foo" DWIMs the intended "upstream" and turns it into
"git checkout -t -b foo remotes/origin/foo". This codepath has been
updated to correctly take existing remote definitions into account.
- (merge 229177a jh/checkout-auto-tracking later to maint).
--show-stats::
Include additional statistics at the end of blame output.
--L <start>,<end>, -L :<regex>::
- Annotate only the given line range. <start> and <end> can take
- one of these forms:
+-L <start>,<end>::
+-L :<regex>::
+ Annotate only the given line range. <start> and <end> are optional.
+ ``-L <start>'' or ``-L <start>,'' spans from <start> to end of file.
+ ``-L ,<end>'' spans from start of file to <end>.
++
+<start> and <end> can take one of these forms:
include::line-range-format.txt[]
will probe and set core.fileMode false if appropriate when the
repository is created.
-core.ignoreCygwinFSTricks::
- This option is only used by Cygwin implementation of Git. If false,
- the Cygwin stat() and lstat() functions are used. This may be useful
- if your repository consists of a few separate directories joined in
- one hierarchy using Cygwin mount. If true, Git uses native Win32 API
- whenever it is possible and falls back to Cygwin functions only to
- handle symbol links. The native mode is more than twice faster than
- normal Cygwin l/stat() functions. True by default, unless core.filemode
- is true, in which case ignoreCygwinFSTricks is ignored as Cygwin's
- POSIX emulation is required to support core.filemode.
-
core.ignorecase::
If true, this option enables various workarounds to enable
Git to work better on filesystems that are not case sensitive,
color.interactive::
When set to `always`, always use colors for interactive prompts
- and displays (such as those used by "git-add --interactive").
- When false (or `never`), never. When set to `true` or `auto`, use
- colors only when the output is to the terminal. Defaults to false.
+ and displays (such as those used by "git-add --interactive" and
+ "git-clean --interactive"). When false (or `never`), never.
+ When set to `true` or `auto`, use colors only when the output is
+ to the terminal. Defaults to false.
color.interactive.<slot>::
- Use customized color for 'git add --interactive'
- output. `<slot>` may be `prompt`, `header`, `help` or `error`, for
- four distinct types of normal output from interactive
- commands. The values of these variables may be specified as
- in color.branch.<slot>.
+ Use customized color for 'git add --interactive' and 'git clean
+ --interactive' output. `<slot>` may be `prompt`, `header`, `help`
+ or `error`, for four distinct types of normal output from
+ interactive commands. The values of these variables may be
+ specified as in color.branch.<slot>.
color.pager::
A boolean to enable/disable colored output when the pager is in
Specify whether to output branch listing in `git branch` in columns.
See `column.ui` for details.
+column.clean::
+ Specify the layout when list items in `git clean -i`, which always
+ shows files and directories in columns. See `column.ui` for details.
+
column.status::
Specify whether to output untracked files in `git status` in columns.
See `column.ui` for details.
sendemail.smtpssl::
Deprecated alias for 'sendemail.smtpencryption = ssl'.
+sendemail.smtpsslcertpath::
+ Path to ca-certificates (either a directory or a single file).
+ Set it to an empty string to disable certificate verification.
+
sendemail.<identity>.*::
Identity-specific versions of the 'sendemail.*' parameters
found below, taking precedence over those when the this
{git-diff? This is the default.}
endif::git-format-patch[]
+-s::
+--no-patch::
+ Suppress diff output. Useful for commands like `git show` that
+ show the patch by default, or to cancel the effect of `--patch`.
+
-U<n>::
--unified=<n>::
Generate diffs with <n> lines of context instead of
a fraction, with a decimal point before it. I.e., `-M5` becomes
0.5, and is thus the same as `-M50%`. Similarly, `-M05` is
the same as `-M5%`. To limit detection to exact renames, use
- `-M100%`.
+ `-M100%`. The default similarity index is 50%.
-C[<n>]::
--find-copies[=<n>]::
;-)
_____________
-Acknowledgements
+Acknowledgments
----------------
Many thanks to Junio Hamano for his help in reviewing this paper, for
to apply the filter to the content recorded in the index at <path>.
--batch::
- Print the SHA-1, type, size, and contents of each object provided on
- stdin. May not be combined with any other options or arguments.
+--batch=<format>::
+ Print object information and contents for each object provided
+ on stdin. May not be combined with any other options or arguments.
+ See the section `BATCH OUTPUT` below for details.
--batch-check::
- Print the SHA-1, type, and size of each object provided on stdin. May not
- be combined with any other options or arguments.
+--batch-check=<format>::
+ Print object information for each object provided on stdin. May
+ not be combined with any other options or arguments. See the
+ section `BATCH OUTPUT` below for details.
OUTPUT
------
If <type> is specified, the raw (though uncompressed) contents of the <object>
will be returned.
-If '--batch' is specified, output of the following form is printed for each
-object specified on stdin:
+BATCH OUTPUT
+------------
+
+If `--batch` or `--batch-check` is given, `cat-file` will read objects
+from stdin, one per line, and print information about them.
+
+Each line is considered as a whole object name, and is parsed as if
+given to linkgit:git-rev-parse[1].
+
+You can specify the information shown for each object by using a custom
+`<format>`. The `<format>` is copied literally to stdout for each
+object, with placeholders of the form `%(atom)` expanded, followed by a
+newline. The available atoms are:
+
+`objectname`::
+ The 40-hex object name of the object.
+
+`objecttype`::
+ The type of of the object (the same as `cat-file -t` reports).
+
+`objectsize`::
+ The size, in bytes, of the object (the same as `cat-file -s`
+ reports).
+
+`objectsize:disk`::
+ The size, in bytes, that the object takes up on disk. See the
+ note about on-disk sizes in the `CAVEATS` section below.
+
+If no format is specified, the default format is `%(objectname)
+%(objecttype) %(objectsize)`.
+
+If `--batch` is specified, the object information is followed by the
+object contents (consisting of `%(objectsize)` bytes), followed by a
+newline.
+
+For example, `--batch` without a custom format would produce:
------------
<sha1> SP <type> SP <size> LF
<contents> LF
------------
-If '--batch-check' is specified, output of the following form is printed for
-each object specified on stdin:
+Whereas `--batch-check='%(objectname) %(objecttype)'` would produce:
------------
-<sha1> SP <type> SP <size> LF
+<sha1> SP <type> LF
------------
-For both '--batch' and '--batch-check', output of the following form is printed
-for each object specified on stdin that does not exist in the repository:
+If a name is specified on stdin that cannot be resolved to an object in
+the repository, then `cat-file` will ignore any custom format and print:
------------
<object> SP missing LF
------------
+
+CAVEATS
+-------
+
+Note that the sizes of objects on disk are reported accurately, but care
+should be taken in drawing conclusions about which refs or objects are
+responsible for disk usage. The size of a packed non-delta object may be
+much larger than the size of objects which delta against it, but the
+choice of which object is the base and which is the delta is arbitrary
+and is subject to change during a repack. Note also that multiple copies
+of an object may be present in the object database; in this case, it is
+undefined which copy's size will be reported.
+
+
GIT
---
Part of the linkgit:git[1] suite
--- /dev/null
+git-check-mailmap(1)
+====================
+
+NAME
+----
+git-check-mailmap - Show canonical names and email addresses of contacts
+
+
+SYNOPSIS
+--------
+[verse]
+'git check-mailmap' [options] <contact>...
+
+
+DESCRIPTION
+-----------
+
+For each ``Name $$<user@host>$$'' or ``$$<user@host>$$'' from the command-line
+or standard input (when using `--stdin`), look up the person's canonical name
+and email address (see "Mapping Authors" below). If found, print them;
+otherwise print the input as-is.
+
+
+OPTIONS
+-------
+--stdin::
+ Read contacts, one per line, from the standard input after exhausting
+ contacts provided on the command-line.
+
+
+OUTPUT
+------
+
+For each contact, a single line is output, terminated by a newline. If the
+name is provided or known to the 'mailmap', ``Name $$<user@host>$$'' is
+printed; otherwise only ``$$<user@host>$$'' is printed.
+
+
+MAPPING AUTHORS
+---------------
+
+include::mailmap.txt[]
+
+
+GIT
+---
+Part of the linkgit:git[1] suite
SYNOPSIS
--------
[verse]
-'git clean' [-d] [-f] [-n] [-q] [-e <pattern>] [-x | -X] [--] <path>...
+'git clean' [-d] [-f] [-
i] [-n] [-q] [-e <pattern>] [-x | -X] [--] <path>...
DESCRIPTION
-----------
-f::
--force::
If the Git configuration variable clean.requireForce is not set
- to false, 'git clean' will refuse to run unless given -f or -n.
+ to false, 'git clean' will refuse to run unless given -f, -n or
+ -i.
+
+-i::
+--interactive::
+ Show what would be done and clean files interactively. See
+ ``Interactive mode'' for details.
-n::
--dry-run::
Remove only files ignored by Git. This may be useful to rebuild
everything from scratch, but keep manually created files.
+Interactive mode
+----------------
+When the command enters the interactive mode, it shows the
+files and directories to be cleaned, and goes into its
+interactive command loop.
+
+The command loop shows the list of subcommands available, and
+gives a prompt "What now> ". In general, when the prompt ends
+with a single '>', you can pick only one of the choices given
+and type return, like this:
+
+------------
+ *** Commands ***
+ 1: clean 2: filter by pattern 3: select by numbers
+ 4: ask each 5: quit 6: help
+ What now> 1
+------------
+
+You also could say `c` or `clean` above as long as the choice is unique.
+
+The main command loop has 6 subcommands.
+
+clean::
+
+ Start cleaning files and directories, and then quit.
+
+filter by pattern::
+
+ This shows the files and directories to be deleted and issues an
+ "Input ignore patterns>>" prompt. You can input space-seperated
+ patterns to exclude files and directories from deletion.
+ E.g. "*.c *.h" will excludes files end with ".c" and ".h" from
+ deletion. When you are satisfied with the filtered result, press
+ ENTER (empty) back to the main menu.
+
+select by numbers::
+
+ This shows the files and directories to be deleted and issues an
+ "Select items to delete>>" prompt. When the prompt ends with double
+ '>>' like this, you can make more than one selection, concatenated
+ with whitespace or comma. Also you can say ranges. E.g. "2-5 7,9"
+ to choose 2,3,4,5,7,9 from the list. If the second number in a
+ range is omitted, all remaining items are selected. E.g. "7-" to
+ choose 7,8,9 from the list. You can say '*' to choose everything.
+ Also when you are satisfied with the filtered result, press ENTER
+ (empty) back to the main menu.
+
+ask each::
+
+ This will start to clean, and you must confirm one by one in order
+ to delete items. Please note that this action is not as efficient
+ as the above two actions.
+
+quit::
+
+ This lets you quit without do cleaning.
+
+help::
+
+ Show brief usage of interactive git-clean.
+
SEE ALSO
--------
linkgit:gitignore[5]
names are not.
--global::
- For writing options: write to global ~/.gitconfig file rather than
- the repository .git/config, write to $XDG_CONFIG_HOME/git/config file
- if this file exists and the ~/.gitconfig file doesn't.
+ For writing options: write to global `~/.gitconfig` file
+ rather than the repository `.git/config`, write to
+ `$XDG_CONFIG_HOME/git/config` file if this file exists and the
+ `~/.gitconfig` file doesn't.
+
-For reading options: read only from global ~/.gitconfig and from
-$XDG_CONFIG_HOME/git/config rather than from all available files.
+For reading options: read only from global `~/.gitconfig` and from
+`$XDG_CONFIG_HOME/git/config` rather than from all available files.
+
See also <<FILES>>.
--system::
- For writing options: write to system-wide $(prefix)/etc/gitconfig
- rather than the repository .git/config.
+ For writing options: write to system-wide
+ `$(prefix)/etc/gitconfig` rather than the repository
+ `.git/config`.
+
-For reading options: read only from system-wide $(prefix)/etc/gitconfig
+For reading options: read only from system-wide `$(prefix)/etc/gitconfig`
rather than from all available files.
+
See also <<FILES>>.
--local::
- For writing options: write to the repository .git/config file.
+ For writing options: write to the repository `.git/config` file.
This is the default behavior.
+
-For reading options: read only from the repository .git/config rather than
+For reading options: read only from the repository `.git/config` rather than
from all available files.
+
See also <<FILES>>.
--file config-file::
Use the given config file instead of the one specified by GIT_CONFIG.
+--blob blob::
+ Similar to '--file' but use the given blob instead of a file. E.g.
+ you can use 'master:.gitmodules' to read values from the file
+ '.gitmodules' in the master branch. See "SPECIFYING REVISIONS"
+ section in linkgit:gitrevisions[7] for a more complete list of
+ ways to spell blob names.
+
--remove-section::
Remove the given section from the configuration file.
If not set explicitly with '--file', there are four files where
'git config' will search for configuration options:
-$GIT_DIR/config::
- Repository specific configuration file.
-
-~/.gitconfig::
- User-specific configuration file. Also called "global"
- configuration file.
+$(prefix)/etc/gitconfig::
+ System-wide configuration file.
$XDG_CONFIG_HOME/git/config::
Second user-specific configuration file. If $XDG_CONFIG_HOME is not set
- or empty, $HOME/.config/git/config will be used. Any single-valued
+ or empty, `$HOME/.config/git/config` will be used. Any single-valued
variable set in this file will be overwritten by whatever is in
- ~/.gitconfig. It is a good idea not to create this file if
+ `~/.gitconfig`. It is a good idea not to create this file if
you sometimes use older versions of Git, as support for this
file was added fairly recently.
-$(prefix)/etc/gitconfig::
- System-wide configuration file.
+~/.gitconfig::
+ User-specific configuration file. Also called "global"
+ configuration file.
+
+$GIT_DIR/config::
+ Repository specific configuration file.
If no further options are given, all reading options will read all of these
files that are available. If the global or the system-wide configuration
file is not available or readable, 'git config' will exit with a non-zero
error code. However, in neither case will an error message be issued.
+The files are read in the order given above, with last value found taking
+precedence over values read earlier. When multiple values are taken then all
+values of a key from all files will be used.
+
All writing options will per default write to the repository specific
configuration file. Note that this also affects options like '--replace-all'
and '--unset'. *'git config' will only ever change one file at a time*.
The negated form `--no-cc` discards all `Cc:` headers added so
far (from config or command line).
+--from::
+--from=<ident>::
+ Use `ident` in the `From:` header of each commit email. If the
+ author ident of the commit is not textually identical to the
+ provided `ident`, place a `From:` header in the body of the
+ message with the original author. If no `ident` is given, use
+ the committer ident.
++
+Note that this option is only useful if you are actually sending the
+emails and want to identify yourself as the sender, but retain the
+original author (and `git am` will correctly pick up the in-body
+header). Note also that `git send-email` already handles this
+transformation for you, and this option should not be used if you are
+feeding the result to `git send-email`.
+
--add-header=<header>::
Add an arbitrary header to the email headers. This is in addition
to any configured headers, and may be used multiple times.
include::pretty-formats.txt[]
-Common diff options
+COMMON DIFF OPTIONS
-------------------
:git-log: 1
include::diff-generate-patch.txt[]
-Examples
+EXAMPLES
--------
`git log --no-merges`::
This makes sense only when following a strict policy of merging all
topic branches when staying on a single integration branch.
-git log -L '/int main/',/^}/:main.c::
+`git log -L '/int main/',/^}/:main.c`::
Shows how the function `main()` in the file 'main.c' evolved
over time.
`git log -3`::
Limits the number of commits to show to 3.
-Discussion
+DISCUSSION
----------
include::i18n.txt[]
-Configuration
+CONFIGURATION
-------------
See linkgit:git-config[1] for core variables and linkgit:git-diff[1]
List all commits reachable from all refs
--stdin::
- Read from stdin, append "(<rev_name>)" to all sha1's of nameable
- commits, and pass to stdout
+ Transform stdin by substituting all the 40-character SHA-1
+ hexes (say $hex) with "$hex ($rev_name)". When used with
+ --name-only, substitute with "$rev_name", omitting $hex
+ altogether. Intended for the scripter's use.
--name-only::
Instead of printing both the SHA-1 and the name, print only
These options can be used in the initial 'clone' as well as in
subsequent 'sync' operations.
---branch <branch>::
- Import changes into given branch. If the branch starts with
- 'refs/', it will be used as is. Otherwise if it does not start
- with 'p4/', that prefix is added. The branch is assumed to
- name a remote tracking, but this can be modified using
- '--import-local', or by giving a full ref name. The default
- branch is 'master'.
+--branch <ref>::
+ Import changes into <ref> instead of refs/remotes/p4/master.
+ If <ref> starts with refs/, it is used as is. Otherwise, if
+ it does not start with p4/, that prefix is added.
++
+By default a <ref> not starting with refs/ is treated as the
+name of a remote-tracking branch (under refs/remotes/). This
+behavior can be modified using the --import-local option.
++
+The default <ref> is "master".
+
This example imports a new remote "p4/proj2" into an existing
Git repository:
`$GIT_DIR/refs` directory hierarchy.
A recommended practice to deal with a repository with too many
-refs is to pack its refs with `--all --prune` once, and
-occasionally run `git pack-refs --prune`. Tags are by
+refs is to pack its refs with `--all` once, and
+occasionally run `git pack-refs`. Tags are by
definition stationary and are not expected to change. Branch
heads will be packed with the initial `pack-refs --all`, but
only the currently active branch heads will become unpacked,
`.git/objects/info/alternates`:
------------
-$ git prune $(cd ../another && $(git rev-parse --all))
+$ git prune $(cd ../another && git rev-parse --all)
------------
Notes
NAME
----
-git-pull - Fetch from and merge with another repository or a local branch
+git-pull - Fetch from and integrate with another repository or a local branch
SYNOPSIS
--------
[verse]
'git reset' [-q] [<tree-ish>] [--] <paths>...
-'git reset' (--patch | -p) [<tree-sh>] [--] [<paths>...]
+'git reset' (--patch | -p) [<tree-
ish>] [--] [<paths>...]
'git reset' [--soft | --mixed | --hard | --merge | --keep] [-q] [<commit>]
DESCRIPTION
[ \--right-only ]
[ \--cherry-mark ]
[ \--cherry-pick ]
- [ \--encoding[=<encoding>] ]
+ [ \--encoding=<encoding> ]
[ \--(author|committer|grep)=<pattern> ]
[ \--regexp-ignore-case | -i ]
[ \--extended-regexp | -E ]
+
If you want to make sure that the output actually names an object in
your object database and/or can be used as a specific type of object
-you require, you can add "^{type}" peeling operator to the parmeter.
+you require, you can add "^{type}" peeling operator to the parameter.
For example, `git rev-parse "$VAR^{commit}"` will make sure `$VAR`
names an existing object that is a commit-ish (i.e. a commit, or an
annotated tag that points at a commit). To make sure that `$VAR`
--smtp-ssl::
Legacy alias for '--smtp-encryption ssl'.
+--smtp-ssl-cert-path::
+ Path to ca-certificates (either a directory or a single file).
+ Set it to an empty string to disable certificate verification.
+ Defaults to the value set to the 'sendemail.smtpsslcertpath'
+ configuration variable, if set, or `/etc/ssl/certs` otherwise.
+
--smtp-user=<user>::
Username for SMTP-AUTH. Default is the value of 'sendemail.smtpuser';
if a username is not specified (with '--smtp-user' or 'sendemail.smtpuser'),
dereferenced into object IDs. Additionally, it can be used to test whether a
particular ref exists.
+By default, shows the tags, heads, and remote refs.
+
The --exclude-existing form is a filter that does the inverse, it shows the
refs from stdin that don't exist in the local repository.
--head::
- Show the HEAD reference.
+ Show the HEAD reference, even if it would normally be filtered out.
--tags::
--heads::
- Limit to only "refs/heads" and "refs/tags", respectively. These
- options are not mutually exclusive; when given both, references stored
- in "refs/heads" and "refs/tags" are displayed.
+ Limit to "refs/heads" and "refs/tags", respectively. These options
+ are not mutually exclusive; when given both, references stored in
+ "refs/heads" and "refs/tags" are displayed.
-d::
--dereference::
include::pretty-formats.txt[]
+COMMON DIFF OPTIONS
+-------------------
+
+:git-log: 1
+include::diff-options.txt[]
+
+include::diff-generate-patch.txt[]
+
+
EXAMPLES
--------
--------
[verse]
'git submodule' [--quiet] add [-b <branch>] [-f|--force] [--name <name>]
- [--reference <repository>] [--] <repository> [<path>]
+ [--reference <repository>] [--
depth <depth>] [--] <repository> [<path>]
'git submodule' [--quiet] status [--cached] [--recursive] [--] [<path>...]
'git submodule' [--quiet] init [--] [<path>...]
'git submodule' [--quiet] deinit [-f|--force] [--] <path>...
'git submodule' [--quiet] update [--init] [--remote] [-N|--no-fetch]
- [-f|--force] [--rebase] [--reference <repository>]
+ [-f|--force] [--rebase] [--reference <repository>] [--depth <depth>]
[--merge] [--recursive] [--] [<path>...]
'git submodule' [--quiet] summary [--cached|--files] [(-n|--summary-limit) <n>]
[commit] [--] [<path>...]
This will make the submodules HEAD be detached unless `--rebase` or
`--merge` is specified or the key `submodule.$name.update` is set to
`rebase`, `merge` or `none`. `none` can be overridden by specifying
- `--checkout`.
+ `--checkout`. Setting the key `submodule.$name.update` to `!command`
+ will cause `command` to be run. `command` can be any arbitrary shell
+ command that takes a single argument, namely the sha1 to update to.
+
If the submodule is not yet initialized, and you just want to use the
setting as stored in .gitmodules, you can automatically initialize the
--remote::
This option is only valid for the update command. Instead of using
the superproject's recorded SHA-1 to update the submodule, use the
- status of the submodule's remote tracking branch. The remote used
+ status of the submodule's remote-tracking branch. The remote used
is branch's remote (`branch.<name>.remote`), defaulting to `origin`.
The remote branch used defaults to `master`, but the branch name may
be overridden by setting the `submodule.<name>.branch` option in
only in the submodules of the current repo, but also
in any nested submodules inside those submodules (and so on).
+--depth::
+ This option is valid for add and update commands. Create a 'shallow'
+ clone with a history truncated to the specified number of revisions.
+ See linkgit:git-clone[1]
+
+
<path>...::
Paths to submodule(s). When specified this will restrict the command
to only operate on the submodules found at the specified paths.
For each patch, one may answer "yes" (accept this patch), "no" (discard this
patch), "all" (accept all patches), or "quit".
+
- 'git svn dcommit' returns immediately if answer if "no" or "quit", without
+ 'git svn dcommit' returns immediately if answer is "no" or "quit", without
committing anything to SVN.
'branch'::
GnuPG key for signing. The configuration variable `gpg.program`
is used to specify custom GnuPG binary.
+Tag objects (created with `-a`, `s`, or `-u`) are called "annotated"
+tags; they contain a creation date, the tagger name and e-mail, a
+tagging message, and an optional GnuPG signature. Whereas a
+"lightweight" tag is simply a name for an object (usually a commit
+object).
+
+Annotated tags are meant for release while lightweight tags are meant
+for private or temporary object labels. For this reason, some git
+commands for naming objects (like `git describe`) will ignore
+lightweight tags by default.
+
OPTIONS
-------
branch of the `git.git` repository.
Documentation for older releases are available here:
-* link:v1.8.3.2/git.html[documentation for release 1.8.3.2]
+* link:v1.8.3.4/git.html[documentation for release 1.8.3.4]
* release notes for
+ link:RelNotes/1.8.3.4.txt[1.8.3.4],
+ link:RelNotes/1.8.3.3.txt[1.8.3.3],
link:RelNotes/1.8.3.2.txt[1.8.3.2],
link:RelNotes/1.8.3.1.txt[1.8.3.1],
link:RelNotes/1.8.3.txt[1.8.3].
used as the first component of gitweb's "breadcrumb trail":
`<home link> / <project> / <action>`. Can be set at build time using
the `GITWEB_HOME_LINK_STR` variable. By default it is set to "projects",
- as this link leads to the list of projects. Other popular choice it to
- set it to the name of site.
+ as this link leads to the list of projects. Another popular choice is to
+ set it to the name of site. Note that it is treated as raw HTML so it
+ should not be set from untrusted sources.
+
+@extra_breadcrumbs::
+ Additional links to be added to the start of the breadcrumb trail before
+ the home link, to pages that are logically "above" the gitweb projects
+ list, such as the organization and department which host the gitweb
+ server. Each element of the list is a reference to an array, in which
+ element 0 is the link text (equivalent to `$home_link_str`) and element
+ 1 is the target URL (equivalent to `$home_link`).
++
+For example, the following setting produces a breadcrumb trail like
+"home / dev / projects / ..." where "projects" is the home link.
+----------------------------------------------------------------------------
+ our @extra_breadcrumbs = (
+ [ 'home' => 'https://www.example.org/' ],
+ [ 'dev' => 'https://dev.example.org/' ],
+ );
+----------------------------------------------------------------------------
$logo_url::
$logo_label::
The above configuration expects your public repositories to live under
'/pub/git' and will serve them as `http://git.domain.org/dir-under-pub-git`,
-both as cloneable Git URL and as browseable gitweb interface. If you then
+both as clonable Git URL and as browseable gitweb interface. If you then
start your linkgit:git-daemon[1] with `--base-path=/pub/git --export-all`
then you can even use the `git://` URL with exactly the same path.
while the HEAD is detached. They update the HEAD to point at the tip
of the updated history without affecting any branch. Commands that
update or inquire information _about_ the current branch (e.g. `git
-branch --set-upstream-to` that sets what remote tracking branch the
+branch --set-upstream-to` that sets what remote-tracking branch the
current branch integrates with) obviously do not work, as there is no
(real) current branch to ask about in this state.
The default upstream <<def_repository,repository>>. Most projects have
at least one upstream project which they track. By default
'origin' is used for that purpose. New upstream updates
- will be fetched into remote <<def_remote_tracking_branch,remote-tracking branches>> named
+ will be fetched into <<def_remote_tracking_branch,remote-tracking branches>> named
origin/name-of-upstream-branch, which you can see using
`git branch -r`.
6. There is a file command-list.txt in the distribution main directory
that categorizes commands by type, so they can be listed in appropriate
subsections in the documentation's summary command list. Add an entry
-for yours. To understand the categories, look at git-cmmands.txt
+for yours. To understand the categories, look at git-commands.txt
in the main directory.
7. Give the maintainer one paragraph to include in the RelNotes file
================================
One of the changes I pulled into the 'master' branch turns out to
-break building Git with GCC 2.95. While they were well intentioned
+break building Git with GCC 2.95. While they were well-intentioned
portability fixes, keeping things working with gcc-2.95 was also
important. Here is what I did to revert the change in the 'master'
branch and to adjust the 'pu' branch, using core Git tools and
This is a shorthand for "--pretty=oneline --abbrev-commit"
used together.
---encoding[=<encoding>]::
+--encoding=<encoding>::
The commit objects record the encoding used for the log message
in their encoding header; this option can be used to tell the
command to re-code the commit log message in the encoding
--no-min-parents::
--no-max-parents::
- Show only commits which have at least (or at most) that many
+ Show only commits which have at least (or at most) that many parent
commits. In particular, `--max-parents=1` is the same as `--no-merges`,
`--min-parents=2` is the same as `--merges`. `--max-parents=0`
gives all root commits and `--min-parents=3` all octopus merges.
* `E` changes `quux` to "xyzzy", and its merge `P` combines the
strings to "quux xyzzy". `P` is TREESAME to `O`, but not to `E`.
-* `X` is an indpendent root commit that added a new file `side`, and `Y`
+* `X` is an independent root commit that added a new file `side`, and `Y`
modified it. `Y` is TREESAME to `X`. Its merge `Q` added `side` to `P`, and
`Q` is TREESAME to `P`, but not to `Y`.
-t::
Show the tree objects in the diff output. This implies '-r'.
-
--s::
- Suppress diff output.
endif::git-rev-list[]
`reset_revision_walk`::
Reset the flags used by the revision walking api. You can use
- this to do multiple sequencial revision walks.
+ this to do multiple sequential revision walks.
Data structures
---------------
A conflict is represented in the index as a set of higher stage entries.
When a conflict is resolved (e.g. with "git add path"), these higher
- stage entries will be removed and a stage-0 entry with proper resoluton
+ stage entries will be removed and a stage-0 entry with proper resolution
is added.
When these higher stage entries are removed, they are saved in the
and server advertised. As a consequence of these rules, server MUST
NOT advertise capabilities it does not understand.
-The 'report-status' and 'delete-refs' capabilities are sent and
+The 'report-status', 'delete-refs', and 'quiet' capabilities are sent and
recognized by the receive-pack (push to server) process.
-The 'ofs-delta' capability is sent and recognized by both upload-pack
-and receive-pack protocols.
+The 'ofs-delta' and 'side-band-64k' capabilities are sent and recognized
+by both upload-pack and receive-pack protocols. The 'agent' capability
+may optionally be sent in both protocols.
All other capabilities are only recognized by the upload-pack (fetch
from server) process.
its base by position in pack rather than by an obj-id. That is, they can
send/read OBJ_OFS_DELTA (aka type 6) in a packfile.
+agent
+-----
+
+The server may optionally send a capability of the form `agent=X` to
+notify the client that the server is running version `X`. The client may
+optionally return its own agent string by responding with an `agent=Y`
+capability (but it MUST NOT do so if the server did not mention the
+agent capability). The `X` and `Y` strings may contain any printable
+ASCII characters except space (i.e., the byte range 32 < x < 127), and
+are typically of the form "package/version" (e.g., "git/1.8.3.1"). The
+agent strings are purely informative for statistics and debugging
+purposes, and MUST NOT be used to programatically assume the presence
+or absence of particular features.
+
shallow
-------
report-status
-------------
-The upload-pack process can receive a 'report-status' capability,
+The receive-pack process can receive a 'report-status' capability,
which tells it that the client wants a report of what happened after
a packfile upload and reference update. If the pushing client requests
this capability, after unpacking and updating references the server
value of a reference update. It is not sent back by the client, it
simply informs the client that it can be sent zero-id values
to delete references.
+
+quiet
+-----
+
+If the receive-pack server advertises the 'quiet' capability, it is
+capable of silencing human-readable progress output which otherwise may
+be shown when processing the received pack. A send-pack client should
+respond with the 'quiet' capability to suppress server-side progress
+reporting if the local progress reporting is also being suppressed
+(e.g., via `push -q`, or if stderr does not go to a tty).
+
+allow-tip-sha1-in-want
+----------------------
+
+If the upload-pack server advertises this capability, fetch-pack may
+send "want" lines with SHA-1s that exist at the server but are not
+advertised by upload-pack.
on-disk timestamps, resulting in meaningless changes when an
inode is evicted from the inode cache. See commit 8ce13b0
of git://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git
-([PATCH] Sync in core time granuality with filesystems,
+([PATCH] Sync in core time granularity with filesystems,
2005-01-04).
Racy Git
Alternates, clone -reference, etc.
More on recovery from repository corruption. See:
- http://marc.theaimsgroup.com/?l=git&m=117263864820799&w=2
- http://marc.theaimsgroup.com/?l=git&m=117147855503798&w=2
+ http://marc.info/?l=git&m=117263864820799&w=2
+ http://marc.info/?l=git&m=117147855503798&w=2
#!/bin/sh
GVF=GIT-VERSION-FILE
-DEF_VER=v1.8.3.GIT
+DEF_VER=v1.8.4-rc2
LF='
'
LIB_H += column.h
LIB_H += commit.h
LIB_H += compat/bswap.h
-LIB_H += compat/cygwin.h
LIB_H += compat/mingw.h
LIB_H += compat/obstack.h
LIB_H += compat/poll/poll.h
BUILTIN_OBJS += builtin/cat-file.o
BUILTIN_OBJS += builtin/check-attr.o
BUILTIN_OBJS += builtin/check-ignore.o
+BUILTIN_OBJS += builtin/check-mailmap.o
BUILTIN_OBJS += builtin/check-ref-format.o
BUILTIN_OBJS += builtin/checkout-index.o
BUILTIN_OBJS += builtin/checkout.o
{ "implicitidentity", &advice_implicit_identity },
{ "detachedhead", &advice_detached_head },
{ "setupstreamfailure", &advice_set_upstream_failure },
- { "object_name_warning", &advice_object_name_warning },
+ { "objectnamewarning", &advice_object_name_warning },
{ "rmhints", &advice_rm_hints },
/* make this an alias for backward compatibility */
extern int advice_rm_hints;
int git_default_advice_config(const char *var, const char *value);
+__attribute__((format (printf, 1, 2)))
void advise(const char *advice, ...);
int error_resolve_conflict(const char *me);
extern void NORETURN die_resolve_conflict(const char *me);
void argv_array_push(struct argv_array *, const char *);
__attribute__((format (printf,2,3)))
void argv_array_pushf(struct argv_array *, const char *fmt, ...);
+LAST_ARG_MUST_BE_NULL
void argv_array_pushl(struct argv_array *, ...);
void argv_array_pop(struct argv_array *);
void argv_array_clear(struct argv_array *);
extern int cmd_checkout_index(int argc, const char **argv, const char *prefix);
extern int cmd_check_attr(int argc, const char **argv, const char *prefix);
extern int cmd_check_ignore(int argc, const char **argv, const char *prefix);
+extern int cmd_check_mailmap(int argc, const char **argv, const char *prefix);
extern int cmd_check_ref_format(int argc, const char **argv, const char *prefix);
extern int cmd_cherry(int argc, const char **argv, const char *prefix);
extern int cmd_cherry_pick(int argc, const char **argv, const char *prefix);
argc = setup_revisions(argc, argv, &rev, NULL);
rev.diffopt.output_format = DIFF_FORMAT_PATCH;
+ rev.diffopt.use_color = 0;
DIFF_OPT_SET(&rev.diffopt, IGNORE_DIRTY_SUBMODULES);
out = open(file, O_CREAT | O_WRONLY, 0666);
if (out < 0)
/*
* Proposed "new-style" GNU patch/diff format; see
- * http://marc.theaimsgroup.com/?l=git&m=112927316408690&w=2
+ * http://marc.info/?l=git&m=112927316408690&w=2
*/
if (unquote_c_style(&name, line, NULL)) {
strbuf_release(&name);
static char *find_name_traditional(const char *line, char *def, int p_value)
{
- size_t len = strlen(line);
+ size_t len;
size_t date_len;
if (*line == '"') {
return 0;
}
-static int read_file_or_gitlink(struct cache_entry *ce, struct strbuf *buf)
+static int read_file_or_gitlink(const struct cache_entry *ce, struct strbuf *buf)
{
if (!ce)
return 0;
return previous;
}
-static int verify_index_match(struct cache_entry *ce, struct stat *st)
+static int verify_index_match(const struct cache_entry *ce, struct stat *st)
{
if (S_ISGITLINK(ce->ce_mode)) {
if (!S_ISDIR(st->st_mode))
#define SUBMODULE_PATCH_WITHOUT_INDEX 1
static int load_patch_target(struct strbuf *buf,
- struct cache_entry *ce,
+ const struct cache_entry *ce,
struct stat *st,
const char *name,
unsigned expected_mode)
* we read from the result of a previous diff.
*/
static int load_preimage(struct image *image,
- struct patch *patch, struct stat *st, struct cache_entry *ce)
+ struct patch *patch, struct stat *st,
+ const struct cache_entry *ce)
{
struct strbuf buf = STRBUF_INIT;
size_t len;
}
static int try_threeway(struct image *image, struct patch *patch,
- struct stat *st, struct cache_entry *ce)
+ struct stat *st, const struct cache_entry *ce)
{
unsigned char pre_sha1[20], post_sha1[20], our_sha1[20];
struct strbuf buf = STRBUF_INIT;
return 0;
}
-static int apply_data(struct patch *patch, struct stat *st, struct cache_entry *ce)
+static int apply_data(struct patch *patch, struct stat *st, const struct cache_entry *ce)
{
struct image image;
const char *s = buf;
if (get_sha1_hex(s + strlen("Subproject commit "), ce->sha1))
- die(_("corrupt patch for subproject %s"), path);
+ die(_("corrupt patch for submodule %s"), path);
} else {
if (!cached) {
if (lstat(path, &st) < 0)
#include "userdiff.h"
#include "streaming.h"
-#define BATCH 1
-#define BATCH_CHECK 2
-
static int cat_one_file(int opt, const char *exp_type, const char *obj_name)
{
unsigned char sha1[20];
return 0;
}
-static int batch_one_object(const char *obj_name, int print_contents)
-{
+struct expand_data {
unsigned char sha1[20];
- enum object_type type = 0;
+ enum object_type type;
unsigned long size;
- void *contents = NULL;
+ unsigned long disk_size;
+
+ /*
+ * If mark_query is true, we do not expand anything, but rather
+ * just mark the object_info with items we wish to query.
+ */
+ int mark_query;
+
+ /*
+ * After a mark_query run, this object_info is set up to be
+ * passed to sha1_object_info_extended. It will point to the data
+ * elements above, so you can retrieve the response from there.
+ */
+ struct object_info info;
+};
+
+static int is_atom(const char *atom, const char *s, int slen)
+{
+ int alen = strlen(atom);
+ return alen == slen && !memcmp(atom, s, alen);
+}
+
+static void expand_atom(struct strbuf *sb, const char *atom, int len,
+ void *vdata)
+{
+ struct expand_data *data = vdata;
+
+ if (is_atom("objectname", atom, len)) {
+ if (!data->mark_query)
+ strbuf_addstr(sb, sha1_to_hex(data->sha1));
+ } else if (is_atom("objecttype", atom, len)) {
+ if (data->mark_query)
+ data->info.typep = &data->type;
+ else
+ strbuf_addstr(sb, typename(data->type));
+ } else if (is_atom("objectsize", atom, len)) {
+ if (data->mark_query)
+ data->info.sizep = &data->size;
+ else
+ strbuf_addf(sb, "%lu", data->size);
+ } else if (is_atom("objectsize:disk", atom, len)) {
+ if (data->mark_query)
+ data->info.disk_sizep = &data->disk_size;
+ else
+ strbuf_addf(sb, "%lu", data->disk_size);
+ } else
+ die("unknown format element: %.*s", len, atom);
+}
+
+static size_t expand_format(struct strbuf *sb, const char *start, void *data)
+{
+ const char *end;
+
+ if (*start != '(')
+ return 0;
+ end = strchr(start + 1, ')');
+ if (!end)
+ die("format element '%s' does not end in ')'", start);
+
+ expand_atom(sb, start + 1, end - start - 1, data);
+
+ return end - start + 1;
+}
+
+static void print_object_or_die(int fd, const unsigned char *sha1,
+ enum object_type type, unsigned long size)
+{
+ if (type == OBJ_BLOB) {
+ if (stream_blob_to_fd(fd, sha1, NULL, 0) < 0)
+ die("unable to stream %s to stdout", sha1_to_hex(sha1));
+ }
+ else {
+ enum object_type rtype;
+ unsigned long rsize;
+ void *contents;
+
+ contents = read_sha1_file(sha1, &rtype, &rsize);
+ if (!contents)
+ die("object %s disappeared", sha1_to_hex(sha1));
+ if (rtype != type)
+ die("object %s changed type!?", sha1_to_hex(sha1));
+ if (rsize != size)
+ die("object %s change size!?", sha1_to_hex(sha1));
+
+ write_or_die(fd, contents, size);
+ free(contents);
+ }
+}
+
+struct batch_options {
+ int enabled;
+ int print_contents;
+ const char *format;
+};
+
+static int batch_one_object(const char *obj_name, struct batch_options *opt,
+ struct expand_data *data)
+{
+ struct strbuf buf = STRBUF_INIT;
if (!obj_name)
return 1;
- if (get_sha1(obj_name, sha1)) {
+ if (get_sha1(obj_name, data->sha1)) {
printf("%s missing\n", obj_name);
fflush(stdout);
return 0;
}
- if (print_contents == BATCH)
- contents = read_sha1_file(sha1, &type, &size);
- else
- type = sha1_object_info(sha1, &size);
-
- if (type <= 0) {
+ if (sha1_object_info_extended(data->sha1, &data->info) < 0) {
printf("%s missing\n", obj_name);
fflush(stdout);
- if (print_contents == BATCH)
- free(contents);
return 0;
}
- printf("%s %s %lu\n", sha1_to_hex(sha1), typename(type), size);
- fflush(stdout);
+ strbuf_expand(&buf, opt->format, expand_format, data);
+ strbuf_addch(&buf, '\n');
+ write_or_die(1, buf.buf, buf.len);
+ strbuf_release(&buf);
- if (print_contents == BATCH) {
- write_or_die(1, contents, size);
- printf("\n");
- fflush(stdout);
- free(contents);
+ if (opt->print_contents) {
+ print_object_or_die(1, data->sha1, data->type, data->size);
+ write_or_die(1, "\n", 1);
}
-
return 0;
}
-static int batch_objects(int print_contents)
+static int batch_objects(struct batch_options *opt)
{
struct strbuf buf = STRBUF_INIT;
+ struct expand_data data;
+
+ if (!opt->format)
+ opt->format = "%(objectname) %(objecttype) %(objectsize)";
+
+ /*
+ * Expand once with our special mark_query flag, which will prime the
+ * object_info to be handed to sha1_object_info_extended for each
+ * object.
+ */
+ memset(&data, 0, sizeof(data));
+ data.mark_query = 1;
+ strbuf_expand(&buf, opt->format, expand_format, &data);
+ data.mark_query = 0;
+
+ /*
+ * We are going to call get_sha1 on a potentially very large number of
+ * objects. In most large cases, these will be actual object sha1s. The
+ * cost to double-check that each one is not also a ref (just so we can
+ * warn) ends up dwarfing the actual cost of the object lookups
+ * themselves. We can work around it by just turning off the warning.
+ */
+ warn_on_object_refname_ambiguity = 0;
while (strbuf_getline(&buf, stdin, '\n') != EOF) {
- int error = batch_one_object(buf.buf, print_contents);
+ int error = batch_one_object(buf.buf, opt, &data);
if (error)
return error;
}
return git_default_config(var, value, cb);
}
+static int batch_option_callback(const struct option *opt,
+ const char *arg,
+ int unset)
+{
+ struct batch_options *bo = opt->value;
+
+ if (unset) {
+ memset(bo, 0, sizeof(*bo));
+ return 0;
+ }
+
+ bo->enabled = 1;
+ bo->print_contents = !strcmp(opt->long_name, "batch");
+ bo->format = arg;
+
+ return 0;
+}
+
int cmd_cat_file(int argc, const char **argv, const char *prefix)
{
- int opt = 0, batch = 0;
+ int opt = 0;
const char *exp_type = NULL, *obj_name = NULL;
+ struct batch_options batch = {0};
const struct option options[] = {
OPT_GROUP(N_("<type> can be one of: blob, tree, commit, tag")),
OPT_SET_INT('p', NULL, &opt, N_("pretty-print object's content"), 'p'),
OPT_SET_INT(0, "textconv", &opt,
N_("for blob objects, run textconv on object's content"), 'c'),
- OPT_SET_INT(0, "batch", &batch,
- N_("show info and content of objects fed from the standard input"),
- BATCH),
- OPT_SET_INT(0, "batch-check", &batch,
- N_("show info about objects fed from the standard input"),
- BATCH_CHECK),
+ { OPTION_CALLBACK, 0, "batch", &batch, "format",
+ N_("show info and content of objects fed from the standard input"),
+ PARSE_OPT_OPTARG, batch_option_callback },
+ { OPTION_CALLBACK, 0, "batch-check", &batch, "format",
+ N_("show info about objects fed from the standard input"),
+ PARSE_OPT_OPTARG, batch_option_callback },
OPT_END()
};
else
usage_with_options(cat_file_usage, options);
}
- if (!opt && !batch) {
+ if (!opt && !batch.enabled) {
if (argc == 2) {
exp_type = argv[0];
obj_name = argv[1];
} else
usage_with_options(cat_file_usage, options);
}
- if (batch && (opt || argc)) {
+ if (batch.enabled && (opt || argc)) {
usage_with_options(cat_file_usage, options);
}
- if (batch)
- return batch_objects(batch);
+ if (batch.enabled)
+ return batch_objects(&batch);
return cat_one_file(opt, exp_type, obj_name);
}
--- /dev/null
+#include "builtin.h"
+#include "mailmap.h"
+#include "parse-options.h"
+#include "string-list.h"
+
+static int use_stdin;
+static const char * const check_mailmap_usage[] = {
+N_("git check-mailmap [options] <contact>..."),
+NULL
+};
+
+static const struct option check_mailmap_options[] = {
+ OPT_BOOL(0, "stdin", &use_stdin, N_("also read contacts from stdin")),
+ OPT_END()
+};
+
+static void check_mailmap(struct string_list *mailmap, const char *contact)
+{
+ const char *name, *mail;
+ size_t namelen, maillen;
+ struct ident_split ident;
+
+ if (split_ident_line(&ident, contact, strlen(contact)))
+ die(_("unable to parse contact: %s"), contact);
+
+ name = ident.name_begin;
+ namelen = ident.name_end - ident.name_begin;
+ mail = ident.mail_begin;
+ maillen = ident.mail_end - ident.mail_begin;
+
+ map_user(mailmap, &mail, &maillen, &name, &namelen);
+
+ if (namelen)
+ printf("%.*s ", (int)namelen, name);
+ printf("<%.*s>\n", (int)maillen, mail);
+}
+
+int cmd_check_mailmap(int argc, const char **argv, const char *prefix)
+{
+ int i;
+ struct string_list mailmap = STRING_LIST_INIT_NODUP;
+
+ git_config(git_default_config, NULL);
+ argc = parse_options(argc, argv, prefix, check_mailmap_options,
+ check_mailmap_usage, 0);
+ if (argc == 0 && !use_stdin)
+ die(_("no contacts specified"));
+
+ read_mailmap(&mailmap, NULL);
+
+ for (i = 0; i < argc; ++i)
+ check_mailmap(&mailmap, argv[i]);
+ maybe_flush_or_die(stdout, "stdout");
+
+ if (use_stdin) {
+ struct strbuf buf = STRBUF_INIT;
+ while (strbuf_getline(&buf, stdin, '\n') != EOF) {
+ check_mailmap(&mailmap, buf.buf);
+ maybe_flush_or_die(stdout, "stdout");
+ }
+ strbuf_release(&buf);
+ }
+
+ clear_mailmap(&mailmap);
+ return 0;
+}
return 0;
}
-static int skip_same_name(struct cache_entry *ce, int pos)
+static int skip_same_name(const struct cache_entry *ce, int pos)
{
while (++pos < active_nr &&
!strcmp(active_cache[pos]->name, ce->name))
return pos;
}
-static int check_stage(int stage, struct cache_entry *ce, int pos)
+static int check_stage(int stage, const struct cache_entry *ce, int pos)
{
while (pos < active_nr &&
!strcmp(active_cache[pos]->name, ce->name)) {
return error(_("path '%s' does not have their version"), ce->name);
}
-static int check_stages(unsigned stages, struct cache_entry *ce, int pos)
+static int check_stages(unsigned stages, const struct cache_entry *ce, int pos)
{
unsigned seen = 0;
const char *name = ce->name;
/* Any unmerged paths? */
for (pos = 0; pos < active_nr; pos++) {
- struct cache_entry *ce = active_cache[pos];
+ const struct cache_entry *ce = active_cache[pos];
if (ce->ce_flags & CE_MATCHED) {
if (!ce_stage(ce))
continue;
#include "refs.h"
#include "string-list.h"
#include "quote.h"
+#include "column.h"
+#include "color.h"
static int force = -1; /* unset */
+static int interactive;
+static struct string_list del_list = STRING_LIST_INIT_DUP;
+static unsigned int colopts;
static const char *const builtin_clean_usage[] = {
- N_("git clean [-d] [-f] [-n] [-q] [-e <pattern>] [-x | -X] [--] <paths>..."),
+ N_("git clean [-d] [-f] [-
i] [-n] [-q] [-e <pattern>] [-x | -X] [--] <paths>..."),
NULL
};
static const char *msg_would_skip_git_dir = N_("Would skip repository %s\n");
static const char *msg_warn_remove_failed = N_("failed to remove %s");
+static int clean_use_color = -1;
+static char clean_colors[][COLOR_MAXLEN] = {
+ GIT_COLOR_RESET,
+ GIT_COLOR_NORMAL, /* PLAIN */
+ GIT_COLOR_BOLD_BLUE, /* PROMPT */
+ GIT_COLOR_BOLD, /* HEADER */
+ GIT_COLOR_BOLD_RED, /* HELP */
+ GIT_COLOR_BOLD_RED, /* ERROR */
+};
+enum color_clean {
+ CLEAN_COLOR_RESET = 0,
+ CLEAN_COLOR_PLAIN = 1,
+ CLEAN_COLOR_PROMPT = 2,
+ CLEAN_COLOR_HEADER = 3,
+ CLEAN_COLOR_HELP = 4,
+ CLEAN_COLOR_ERROR = 5,
+};
+
+#define MENU_OPTS_SINGLETON 01
+#define MENU_OPTS_IMMEDIATE 02
+#define MENU_OPTS_LIST_ONLY 04
+
+struct menu_opts {
+ const char *header;
+ const char *prompt;
+ int flags;
+};
+
+#define MENU_RETURN_NO_LOOP 10
+
+struct menu_item {
+ char hotkey;
+ const char *title;
+ int selected;
+ int (*fn)();
+};
+
+enum menu_stuff_type {
+ MENU_STUFF_TYPE_STRING_LIST = 1,
+ MENU_STUFF_TYPE_MENU_ITEM
+};
+
+struct menu_stuff {
+ enum menu_stuff_type type;
+ int nr;
+ void *stuff;
+};
+
+static int parse_clean_color_slot(const char *var)
+{
+ if (!strcasecmp(var, "reset"))
+ return CLEAN_COLOR_RESET;
+ if (!strcasecmp(var, "plain"))
+ return CLEAN_COLOR_PLAIN;
+ if (!strcasecmp(var, "prompt"))
+ return CLEAN_COLOR_PROMPT;
+ if (!strcasecmp(var, "header"))
+ return CLEAN_COLOR_HEADER;
+ if (!strcasecmp(var, "help"))
+ return CLEAN_COLOR_HELP;
+ if (!strcasecmp(var, "error"))
+ return CLEAN_COLOR_ERROR;
+ return -1;
+}
+
static int git_clean_config(const char *var, const char *value, void *cb)
{
- if (!strcmp(var, "clean.requireforce"))
+ if (!prefixcmp(var, "column."))
+ return git_column_config(var, value, "clean", &colopts);
+
+ /* honors the color.interactive* config variables which also
+ applied in git-add--interactive and git-stash */
+ if (!strcmp(var, "color.interactive")) {
+ clean_use_color = git_config_colorbool(var, value);
+ return 0;
+ }
+ if (!prefixcmp(var, "color.interactive.")) {
+ int slot = parse_clean_color_slot(var +
+ strlen("color.interactive."));
+ if (slot < 0)
+ return 0;
+ if (!value)
+ return config_error_nonbool(var);
+ color_parse(value, var, clean_colors[slot]);
+ return 0;
+ }
+
+ if (!strcmp(var, "clean.requireforce")) {
force = !git_config_bool(var, value);
- return git_default_config(var, value, cb);
+ return 0;
+ }
+
+ /* inspect the color.ui config variable and others */
+ return git_color_default_config(var, value, cb);
+}
+
+static const char *clean_get_color(enum color_clean ix)
+{
+ if (want_color(clean_use_color))
+ return clean_colors[ix];
+ return "";
+}
+
+static void clean_print_color(enum color_clean ix)
+{
+ printf("%s", clean_get_color(ix));
}
static int exclude_cb(const struct option *opt, const char *arg, int unset)
if ((force_flag & REMOVE_DIR_KEEP_NESTED_GIT) &&
!resolve_gitlink_ref(path->buf, "HEAD", submodule_head)) {
if (!quiet) {
- quote_path_relative(path->buf, strlen(path->buf), "ed, prefix);
+ quote_path_relative(path->buf, prefix, "ed);
printf(dry_run ? _(msg_would_skip_git_dir) : _(msg_skip_git_dir),
quoted.buf);
}
/* an empty dir could be removed even if it is unreadble */
res = dry_run ? 0 : rmdir(path->buf);
if (res) {
- quote_path_relative(path->buf, strlen(path->buf), "ed, prefix);
+ quote_path_relative(path->buf, prefix, "ed);
warning(_(msg_warn_remove_failed), quoted.buf);
*dir_gone = 0;
}
if (remove_dirs(path, prefix, force_flag, dry_run, quiet, &gone))
ret = 1;
if (gone) {
- quote_path_relative(path->buf, strlen(path->buf), "ed, prefix);
+ quote_path_relative(path->buf, prefix, "ed);
string_list_append(&dels, quoted.buf);
} else
*dir_gone = 0;
} else {
res = dry_run ? 0 : unlink(path->buf);
if (!res) {
- quote_path_relative(path->buf, strlen(path->buf), "ed, prefix);
+ quote_path_relative(path->buf, prefix, "ed);
string_list_append(&dels, quoted.buf);
} else {
- quote_path_relative(path->buf, strlen(path->buf), "ed, prefix);
+ quote_path_relative(path->buf, prefix, "ed);
warning(_(msg_warn_remove_failed), quoted.buf);
*dir_gone = 0;
ret = 1;
if (!res)
*dir_gone = 1;
else {
- quote_path_relative(path->buf, strlen(path->buf), "ed, prefix);
+ quote_path_relative(path->buf, prefix, "ed);
warning(_(msg_warn_remove_failed), quoted.buf);
*dir_gone = 0;
ret = 1;
return ret;
}
+static void pretty_print_dels(void)
+{
+ struct string_list list = STRING_LIST_INIT_DUP;
+ struct string_list_item *item;
+ struct strbuf buf = STRBUF_INIT;
+ const char *qname;
+ struct column_options copts;
+
+ for_each_string_list_item(item, &del_list) {
+ qname = quote_path_relative(item->string, NULL, &buf);
+ string_list_append(&list, qname);
+ }
+
+ /*
+ * always enable column display, we only consult column.*
+ * about layout strategy and stuff
+ */
+ colopts = (colopts & ~COL_ENABLE_MASK) | COL_ENABLED;
+ memset(&copts, 0, sizeof(copts));
+ copts.indent = " ";
+ copts.padding = 2;
+ print_columns(&list, colopts, &copts);
+ strbuf_release(&buf);
+ string_list_clear(&list, 0);
+}
+
+static void pretty_print_menus(struct string_list *menu_list)
+{
+ unsigned int local_colopts = 0;
+ struct column_options copts;
+
+ local_colopts = COL_ENABLED | COL_ROW;
+ memset(&copts, 0, sizeof(copts));
+ copts.indent = " ";
+ copts.padding = 2;
+ print_columns(menu_list, local_colopts, &copts);
+}
+
+static void prompt_help_cmd(int singleton)
+{
+ clean_print_color(CLEAN_COLOR_HELP);
+ printf_ln(singleton ?
+ _("Prompt help:\n"
+ "1 - select a numbered item\n"
+ "foo - select item based on unique prefix\n"
+ " - (empty) select nothing") :
+ _("Prompt help:\n"
+ "1 - select a single item\n"
+ "3-5 - select a range of items\n"
+ "2-3,6-9 - select multiple ranges\n"
+ "foo - select item based on unique prefix\n"
+ "-... - unselect specified items\n"
+ "* - choose all items\n"
+ " - (empty) finish selecting"));
+ clean_print_color(CLEAN_COLOR_RESET);
+}
+
+/*
+ * display menu stuff with number prefix and hotkey highlight
+ */
+static void print_highlight_menu_stuff(struct menu_stuff *stuff, int **chosen)
+{
+ struct string_list menu_list = STRING_LIST_INIT_DUP;
+ struct strbuf menu = STRBUF_INIT;
+ struct strbuf buf = STRBUF_INIT;
+ struct menu_item *menu_item;
+ struct string_list_item *string_list_item;
+ int i;
+
+ switch (stuff->type) {
+ default:
+ die("Bad type of menu_staff when print menu");
+ case MENU_STUFF_TYPE_MENU_ITEM:
+ menu_item = (struct menu_item *)stuff->stuff;
+ for (i = 0; i < stuff->nr; i++, menu_item++) {
+ const char *p;
+ int highlighted = 0;
+
+ p = menu_item->title;
+ if ((*chosen)[i] < 0)
+ (*chosen)[i] = menu_item->selected ? 1 : 0;
+ strbuf_addf(&menu, "%s%2d: ", (*chosen)[i] ? "*" : " ", i+1);
+ for (; *p; p++) {
+ if (!highlighted && *p == menu_item->hotkey) {
+ strbuf_addstr(&menu, clean_get_color(CLEAN_COLOR_PROMPT));
+ strbuf_addch(&menu, *p);
+ strbuf_addstr(&menu, clean_get_color(CLEAN_COLOR_RESET));
+ highlighted = 1;
+ } else {
+ strbuf_addch(&menu, *p);
+ }
+ }
+ string_list_append(&menu_list, menu.buf);
+ strbuf_reset(&menu);
+ }
+ break;
+ case MENU_STUFF_TYPE_STRING_LIST:
+ i = 0;
+ for_each_string_list_item(string_list_item, (struct string_list *)stuff->stuff) {
+ if ((*chosen)[i] < 0)
+ (*chosen)[i] = 0;
+ strbuf_addf(&menu, "%s%2d: %s",
+ (*chosen)[i] ? "*" : " ", i+1, string_list_item->string);
+ string_list_append(&menu_list, menu.buf);
+ strbuf_reset(&menu);
+ i++;
+ }
+ break;
+ }
+
+ pretty_print_menus(&menu_list);
+
+ strbuf_release(&menu);
+ strbuf_release(&buf);
+ string_list_clear(&menu_list, 0);
+}
+
+static int find_unique(const char *choice, struct menu_stuff *menu_stuff)
+{
+ struct menu_item *menu_item;
+ struct string_list_item *string_list_item;
+ int i, len, found = 0;
+
+ len = strlen(choice);
+ switch (menu_stuff->type) {
+ default:
+ die("Bad type of menu_stuff when parse choice");
+ case MENU_STUFF_TYPE_MENU_ITEM:
+
+ menu_item = (struct menu_item *)menu_stuff->stuff;
+ for (i = 0; i < menu_stuff->nr; i++, menu_item++) {
+ if (len == 1 && *choice == menu_item->hotkey) {
+ found = i + 1;
+ break;
+ }
+ if (!strncasecmp(choice, menu_item->title, len)) {
+ if (found) {
+ if (len == 1) {
+ /* continue for hotkey matching */
+ found = -1;
+ } else {
+ found = 0;
+ break;
+ }
+ } else {
+ found = i + 1;
+ }
+ }
+ }
+ break;
+ case MENU_STUFF_TYPE_STRING_LIST:
+ string_list_item = ((struct string_list *)menu_stuff->stuff)->items;
+ for (i = 0; i < menu_stuff->nr; i++, string_list_item++) {
+ if (!strncasecmp(choice, string_list_item->string, len)) {
+ if (found) {
+ found = 0;
+ break;
+ }
+ found = i + 1;
+ }
+ }
+ break;
+ }
+ return found;
+}
+
+
+/*
+ * Parse user input, and return choice(s) for menu (menu_stuff).
+ *
+ * Input
+ * (for single choice)
+ * 1 - select a numbered item
+ * foo - select item based on menu title
+ * - (empty) select nothing
+ *
+ * (for multiple choice)
+ * 1 - select a single item
+ * 3-5 - select a range of items
+ * 2-3,6-9 - select multiple ranges
+ * foo - select item based on menu title
+ * -... - unselect specified items
+ * * - choose all items
+ * - (empty) finish selecting
+ *
+ * The parse result will be saved in array **chosen, and
+ * return number of total selections.
+ */
+static int parse_choice(struct menu_stuff *menu_stuff,
+ int is_single,
+ struct strbuf input,
+ int **chosen)
+{
+ struct strbuf **choice_list, **ptr;
+ int nr = 0;
+ int i;
+
+ if (is_single) {
+ choice_list = strbuf_split_max(&input, '\n', 0);
+ } else {
+ char *p = input.buf;
+ do {
+ if (*p == ',')
+ *p = ' ';
+ } while (*p++);
+ choice_list = strbuf_split_max(&input, ' ', 0);
+ }
+
+ for (ptr = choice_list; *ptr; ptr++) {
+ char *p;
+ int choose = 1;
+ int bottom = 0, top = 0;
+ int is_range, is_number;
+
+ strbuf_trim(*ptr);
+ if (!(*ptr)->len)
+ continue;
+
+ /* Input that begins with '-'; unchoose */
+ if (*(*ptr)->buf == '-') {
+ choose = 0;
+ strbuf_remove((*ptr), 0, 1);
+ }
+
+ is_range = 0;
+ is_number = 1;
+ for (p = (*ptr)->buf; *p; p++) {
+ if ('-' == *p) {
+ if (!is_range) {
+ is_range = 1;
+ is_number = 0;
+ } else {
+ is_number = 0;
+ is_range = 0;
+ break;
+ }
+ } else if (!isdigit(*p)) {
+ is_number = 0;
+ is_range = 0;
+ break;
+ }
+ }
+
+ if (is_number) {
+ bottom = atoi((*ptr)->buf);
+ top = bottom;
+ } else if (is_range) {
+ bottom = atoi((*ptr)->buf);
+ /* a range can be specified like 5-7 or 5- */
+ if (!*(strchr((*ptr)->buf, '-') + 1))
+ top = menu_stuff->nr;
+ else
+ top = atoi(strchr((*ptr)->buf, '-') + 1);
+ } else if (!strcmp((*ptr)->buf, "*")) {
+ bottom = 1;
+ top = menu_stuff->nr;
+ } else {
+ bottom = find_unique((*ptr)->buf, menu_stuff);
+ top = bottom;
+ }
+
+ if (top <= 0 || bottom <= 0 || top > menu_stuff->nr || bottom > top ||
+ (is_single && bottom != top)) {
+ clean_print_color(CLEAN_COLOR_ERROR);
+ printf_ln(_("Huh (%s)?"), (*ptr)->buf);
+ clean_print_color(CLEAN_COLOR_RESET);
+ continue;
+ }
+
+ for (i = bottom; i <= top; i++)
+ (*chosen)[i-1] = choose;
+ }
+
+ strbuf_list_free(choice_list);
+
+ for (i = 0; i < menu_stuff->nr; i++)
+ nr += (*chosen)[i];
+ return nr;
+}
+
+/*
+ * Implement a git-add-interactive compatible UI, which is borrowed
+ * from git-add--interactive.perl.
+ *
+ * Return value:
+ *
+ * - Return an array of integers
+ * - , and it is up to you to free the allocated memory.
+ * - The array ends with EOF.
+ * - If user pressed CTRL-D (i.e. EOF), no selection returned.
+ */
+static int *list_and_choose(struct menu_opts *opts, struct menu_stuff *stuff)
+{
+ struct strbuf choice = STRBUF_INIT;
+ int *chosen, *result;
+ int nr = 0;
+ int eof = 0;
+ int i;
+
+ chosen = xmalloc(sizeof(int) * stuff->nr);
+ /* set chosen as uninitialized */
+ for (i = 0; i < stuff->nr; i++)
+ chosen[i] = -1;
+
+ for (;;) {
+ if (opts->header) {
+ printf_ln("%s%s%s",
+ clean_get_color(CLEAN_COLOR_HEADER),
+ _(opts->header),
+ clean_get_color(CLEAN_COLOR_RESET));
+ }
+
+ /* chosen will be initialized by print_highlight_menu_stuff */
+ print_highlight_menu_stuff(stuff, &chosen);
+
+ if (opts->flags & MENU_OPTS_LIST_ONLY)
+ break;
+
+ if (opts->prompt) {
+ printf("%s%s%s%s",
+ clean_get_color(CLEAN_COLOR_PROMPT),
+ _(opts->prompt),
+ opts->flags & MENU_OPTS_SINGLETON ? "> " : ">> ",
+ clean_get_color(CLEAN_COLOR_RESET));
+ }
+
+ if (strbuf_getline(&choice, stdin, '\n') != EOF) {
+ strbuf_trim(&choice);
+ } else {
+ eof = 1;
+ break;
+ }
+
+ /* help for prompt */
+ if (!strcmp(choice.buf, "?")) {
+ prompt_help_cmd(opts->flags & MENU_OPTS_SINGLETON);
+ continue;
+ }
+
+ /* for a multiple-choice menu, press ENTER (empty) will return back */
+ if (!(opts->flags & MENU_OPTS_SINGLETON) && !choice.len)
+ break;
+
+ nr = parse_choice(stuff,
+ opts->flags & MENU_OPTS_SINGLETON,
+ choice,
+ &chosen);
+
+ if (opts->flags & MENU_OPTS_SINGLETON) {
+ if (nr)
+ break;
+ } else if (opts->flags & MENU_OPTS_IMMEDIATE) {
+ break;
+ }
+ }
+
+ if (eof) {
+ result = xmalloc(sizeof(int));
+ *result = EOF;
+ } else {
+ int j = 0;
+
+ /*
+ * recalculate nr, if return back from menu directly with
+ * default selections.
+ */
+ if (!nr) {
+ for (i = 0; i < stuff->nr; i++)
+ nr += chosen[i];
+ }
+
+ result = xmalloc(sizeof(int) * (nr + 1));
+ memset(result, 0, sizeof(int) * (nr + 1));
+ for (i = 0; i < stuff->nr && j < nr; i++) {
+ if (chosen[i])
+ result[j++] = i;
+ }
+ result[j] = EOF;
+ }
+
+ free(chosen);
+ strbuf_release(&choice);
+ return result;
+}
+
+static int clean_cmd(void)
+{
+ return MENU_RETURN_NO_LOOP;
+}
+
+static int filter_by_patterns_cmd(void)
+{
+ struct dir_struct dir;
+ struct strbuf confirm = STRBUF_INIT;
+ struct strbuf **ignore_list;
+ struct string_list_item *item;
+ struct exclude_list *el;
+ int changed = -1, i;
+
+ for (;;) {
+ if (!del_list.nr)
+ break;
+
+ if (changed)
+ pretty_print_dels();
+
+ clean_print_color(CLEAN_COLOR_PROMPT);
+ printf(_("Input ignore patterns>> "));
+ clean_print_color(CLEAN_COLOR_RESET);
+ if (strbuf_getline(&confirm, stdin, '\n') != EOF)
+ strbuf_trim(&confirm);
+ else
+ putchar('\n');
+
+ /* quit filter_by_pattern mode if press ENTER or Ctrl-D */
+ if (!confirm.len)
+ break;
+
+ memset(&dir, 0, sizeof(dir));
+ el = add_exclude_list(&dir, EXC_CMDL, "manual exclude");
+ ignore_list = strbuf_split_max(&confirm, ' ', 0);
+
+ for (i = 0; ignore_list[i]; i++) {
+ strbuf_trim(ignore_list[i]);
+ if (!ignore_list[i]->len)
+ continue;
+
+ add_exclude(ignore_list[i]->buf, "", 0, el, -(i+1));
+ }
+
+ changed = 0;
+ for_each_string_list_item(item, &del_list) {
+ int dtype = DT_UNKNOWN;
+
+ if (is_excluded(&dir, item->string, &dtype)) {
+ *item->string = '\0';
+ changed++;
+ }
+ }
+
+ if (changed) {
+ string_list_remove_empty_items(&del_list, 0);
+ } else {
+ clean_print_color(CLEAN_COLOR_ERROR);
+ printf_ln(_("WARNING: Cannot find items matched by: %s"), confirm.buf);
+ clean_print_color(CLEAN_COLOR_RESET);
+ }
+
+ strbuf_list_free(ignore_list);
+ clear_directory(&dir);
+ }
+
+ strbuf_release(&confirm);
+ return 0;
+}
+
+static int select_by_numbers_cmd(void)
+{
+ struct menu_opts menu_opts;
+ struct menu_stuff menu_stuff;
+ struct string_list_item *items;
+ int *chosen;
+ int i, j;
+
+ menu_opts.header = NULL;
+ menu_opts.prompt = N_("Select items to delete");
+ menu_opts.flags = 0;
+
+ menu_stuff.type = MENU_STUFF_TYPE_STRING_LIST;
+ menu_stuff.stuff = &del_list;
+ menu_stuff.nr = del_list.nr;
+
+ chosen = list_and_choose(&menu_opts, &menu_stuff);
+ items = del_list.items;
+ for (i = 0, j = 0; i < del_list.nr; i++) {
+ if (i < chosen[j]) {
+ *(items[i].string) = '\0';
+ } else if (i == chosen[j]) {
+ /* delete selected item */
+ j++;
+ continue;
+ } else {
+ /* end of chosen (chosen[j] == EOF), won't delete */
+ *(items[i].string) = '\0';
+ }
+ }
+
+ string_list_remove_empty_items(&del_list, 0);
+
+ free(chosen);
+ return 0;
+}
+
+static int ask_each_cmd(void)
+{
+ struct strbuf confirm = STRBUF_INIT;
+ struct strbuf buf = STRBUF_INIT;
+ struct string_list_item *item;
+ const char *qname;
+ int changed = 0, eof = 0;
+
+ for_each_string_list_item(item, &del_list) {
+ /* Ctrl-D should stop removing files */
+ if (!eof) {
+ qname = quote_path_relative(item->string, NULL, &buf);
+ printf(_("remove %s? "), qname);
+ if (strbuf_getline(&confirm, stdin, '\n') != EOF) {
+ strbuf_trim(&confirm);
+ } else {
+ putchar('\n');
+ eof = 1;
+ }
+ }
+ if (!confirm.len || strncasecmp(confirm.buf, "yes", confirm.len)) {
+ *item->string = '\0';
+ changed++;
+ }
+ }
+
+ if (changed)
+ string_list_remove_empty_items(&del_list, 0);
+
+ strbuf_release(&buf);
+ strbuf_release(&confirm);
+ return MENU_RETURN_NO_LOOP;
+}
+
+static int quit_cmd(void)
+{
+ string_list_clear(&del_list, 0);
+ printf_ln(_("Bye."));
+ return MENU_RETURN_NO_LOOP;
+}
+
+static int help_cmd(void)
+{
+ clean_print_color(CLEAN_COLOR_HELP);
+ printf_ln(_(
+ "clean - start cleaning\n"
+ "filter by pattern - exclude items from deletion\n"
+ "select by numbers - select items to be deleted by numbers\n"
+ "ask each - confirm each deletion (like \"rm -i\")\n"
+ "quit - stop cleaning\n"
+ "help - this screen\n"
+ "? - help for prompt selection"
+ ));
+ clean_print_color(CLEAN_COLOR_RESET);
+ return 0;
+}
+
+static void interactive_main_loop(void)
+{
+ while (del_list.nr) {
+ struct menu_opts menu_opts;
+ struct menu_stuff menu_stuff;
+ struct menu_item menus[] = {
+ {'c', "clean", 0, clean_cmd},
+ {'f', "filter by pattern", 0, filter_by_patterns_cmd},
+ {'s', "select by numbers", 0, select_by_numbers_cmd},
+ {'a', "ask each", 0, ask_each_cmd},
+ {'q', "quit", 0, quit_cmd},
+ {'h', "help", 0, help_cmd},
+ };
+ int *chosen;
+
+ menu_opts.header = N_("*** Commands ***");
+ menu_opts.prompt = N_("What now");
+ menu_opts.flags = MENU_OPTS_SINGLETON;
+
+ menu_stuff.type = MENU_STUFF_TYPE_MENU_ITEM;
+ menu_stuff.stuff = menus;
+ menu_stuff.nr = sizeof(menus) / sizeof(struct menu_item);
+
+ clean_print_color(CLEAN_COLOR_HEADER);
+ printf_ln(Q_("Would remove the following item:",
+ "Would remove the following items:",
+ del_list.nr));
+ clean_print_color(CLEAN_COLOR_RESET);
+
+ pretty_print_dels();
+
+ chosen = list_and_choose(&menu_opts, &menu_stuff);
+
+ if (*chosen != EOF) {
+ int ret;
+ ret = menus[*chosen].fn();
+ if (ret != MENU_RETURN_NO_LOOP) {
+ free(chosen);
+ chosen = NULL;
+ if (!del_list.nr) {
+ clean_print_color(CLEAN_COLOR_ERROR);
+ printf_ln(_("No more files to clean, exiting."));
+ clean_print_color(CLEAN_COLOR_RESET);
+ break;
+ }
+ continue;
+ }
+ } else {
+ quit_cmd();
+ }
+
+ free(chosen);
+ chosen = NULL;
+ break;
+ }
+}
+
int cmd_clean(int argc, const char **argv, const char *prefix)
{
int i, res;
int dry_run = 0, remove_directories = 0, quiet = 0, ignored = 0;
int ignored_only = 0, config_set = 0, errors = 0, gone = 1;
int rm_flags = REMOVE_DIR_KEEP_NESTED_GIT;
- struct strbuf directory = STRBUF_INIT;
+ struct strbuf abs_path = STRBUF_INIT;
struct dir_struct dir;
static const char **pathspec;
struct strbuf buf = STRBUF_INIT;
struct string_list exclude_list = STRING_LIST_INIT_NODUP;
struct exclude_list *el;
+ struct string_list_item *item;
const char *qname;
char *seen = NULL;
struct option options[] = {
OPT__QUIET(&quiet, N_("do not print names of files removed")),
OPT__DRY_RUN(&dry_run, N_("dry run")),
OPT__FORCE(&force, N_("force")),
+ OPT_BOOL('i', "interactive", &interactive, N_("interactive cleaning")),
OPT_BOOLEAN('d', NULL, &remove_directories,
N_("remove whole directories")),
{ OPTION_CALLBACK, 'e', "exclude", &exclude_list, N_("pattern"),
if (ignored && ignored_only)
die(_("-x and -X cannot be used together"));
- if (!dry_run && !force) {
+ if (!interactive && !dry_run && !force) {
if (config_set)
- die(_("clean.requireForce set to true and neither -n nor -f given; "
+ die(_("clean.requireForce set to true and neither -i, -n nor -f given; "
"refusing to clean"));
else
- die(_("clean.requireForce defaults to true and neither -n nor -f given; "
+ die(_("clean.requireForce defaults to true and neither -i, -n nor -f given; "
"refusing to clean"));
}
struct dir_entry *ent = dir.entries[i];
int len, pos;
int matches = 0;
- struct cache_entry *ce;
+ const struct cache_entry *ce;
struct stat st;
+ const char *rel;
/*
* Remove the '/' at the end that directory
continue; /* Yup, this one exists unmerged */
}
- /*
- * we might have removed this as part of earlier
- * recursive directory removal, so lstat() here could
- * fail with ENOENT.
- */
if (lstat(ent->name, &st))
- continue;
+ die_errno("Cannot lstat '%s'", ent->name);
if (pathspec) {
memset(seen, 0, argc > 0 ? argc : 1);
}
if (S_ISDIR(st.st_mode)) {
- strbuf_addstr(&directory, ent->name);
if (remove_directories || (matches == MATCHED_EXACTLY)) {
- if (remove_dirs(&directory, prefix, rm_flags, dry_run, quiet, &gone))
- errors++;
- if (gone && !quiet) {
- qname = quote_path_relative(directory.buf, directory.len, &buf, prefix);
- printf(dry_run ? _(msg_would_remove) : _(msg_remove), qname);
- }
+ rel = relative_path(ent->name, prefix, &buf);
+ string_list_append(&del_list, rel);
}
- strbuf_reset(&directory);
} else {
if (pathspec && !matches)
continue;
- res = dry_run ? 0 : unlink(ent->name);
+ rel = relative_path(ent->name, prefix, &buf);
+ string_list_append(&del_list, rel);
+ }
+ }
+
+ if (interactive && del_list.nr > 0)
+ interactive_main_loop();
+
+ for_each_string_list_item(item, &del_list) {
+ struct stat st;
+
+ if (prefix)
+ strbuf_addstr(&abs_path, prefix);
+
+ strbuf_addstr(&abs_path, item->string);
+
+ /*
+ * we might have removed this as part of earlier
+ * recursive directory removal, so lstat() here could
+ * fail with ENOENT.
+ */
+ if (lstat(abs_path.buf, &st))
+ continue;
+
+ if (S_ISDIR(st.st_mode)) {
+ if (remove_dirs(&abs_path, prefix, rm_flags, dry_run, quiet, &gone))
+ errors++;
+ if (gone && !quiet) {
+ qname = quote_path_relative(item->string, NULL, &buf);
+ printf(dry_run ? _(msg_would_remove) : _(msg_remove), qname);
+ }
+ } else {
+ res = dry_run ? 0 : unlink(abs_path.buf);
if (res) {
- qname = quote_path_relative(ent->name, -1, &buf, prefix);
+ qname = quote_path_relative(item->string, NULL, &buf);
warning(_(msg_warn_remove_failed), qname);
errors++;
} else if (!quiet) {
- qname = quote_path_relative(ent->name, -1, &buf, prefix);
+ qname = quote_path_relative(item->string, NULL, &buf);
printf(dry_run ? _(msg_would_remove) : _(msg_remove), qname);
}
}
+ strbuf_reset(&abs_path);
}
free(seen);
- strbuf_release(&directory);
+ strbuf_release(&abs_path);
+ strbuf_release(&buf);
+ string_list_clear(&del_list, 0);
string_list_clear(&exclude_list, 0);
return (errors != 0);
}
const struct ref *remote_head_points_at,
const char *branch_top,
const char *msg,
- struct transport *transport)
+ struct transport *transport,
+ int check_connectivity)
{
const struct ref *rm = mapped_refs;
- if (0 <= option_verbosity)
- printf(_("Checking connectivity... "));
- if (check_everything_connected_with_transport(iterate_ref_map,
- 0, &rm, transport))
- die(_("remote did not send all necessary objects"));
- if (0 <= option_verbosity)
- printf(_("done\n"));
+ if (check_connectivity) {
+ if (0 <= option_verbosity)
+ printf(_("Checking connectivity... "));
+ if (check_everything_connected_with_transport(iterate_ref_map,
+ 0, &rm, transport))
+ die(_("remote did not send all necessary objects"));
+ if (0 <= option_verbosity)
+ printf(_("done\n"));
+ }
if (refs) {
write_remote_refs(mapped_refs);
/*
* otherwise, the next "git fetch" will
* simply fetch from HEAD without updating
- * any remote tracking branch, which is what
+ * any remote-tracking branch, which is what
* we want.
*/
} else {
transport_fetch_refs(transport, mapped_refs);
update_remote_refs(refs, mapped_refs, remote_head_points_at,
- branch_top.buf, reflog_msg.buf, transport);
+ branch_top.buf, reflog_msg.buf, transport, !is_local);
update_head(our_head_points_at, remote_head, reflog_msg.buf);
"If you wish to commit it anyway, use:\n"
"\n"
" git commit --allow-empty\n"
+"\n");
+
+static const char empty_cherry_pick_advice_single[] =
+N_("Otherwise, please use 'git reset'\n");
+
+static const char empty_cherry_pick_advice_multi[] =
+N_("If you wish to skip this commit, use:\n"
"\n"
-"Otherwise, please use 'git reset'\n");
+" git reset\n"
+"\n"
+"Then \"git cherry-pick --continue\" will resume cherry-picking\n"
+"the remaining commits.\n");
static const char *use_message_buffer;
static const char commit_editmsg[] = "COMMIT_EDITMSG";
static const char *cleanup_arg;
static enum commit_whence whence;
+static int sequencer_in_use;
static int use_editor = 1, include_status = 1;
static int show_ignored_in_status, have_option_m;
static const char *only_include_assumed;
{
if (file_exists(git_path("MERGE_HEAD")))
whence = FROM_MERGE;
- else if (file_exists(git_path("CHERRY_PICK_HEAD")))
+ else if (file_exists(git_path("CHERRY_PICK_HEAD"))) {
whence = FROM_CHERRY_PICK;
+ if (file_exists(git_path("sequencer")))
+ sequencer_in_use = 1;
+ }
else
whence = FROM_COMMIT;
if (s)
}
for (i = 0; i < active_nr; i++) {
- struct cache_entry *ce = active_cache[i];
+ const struct cache_entry *ce = active_cache[i];
struct string_list_item *item;
if (ce->ce_flags & CE_UPDATE)
(lb - strlen(" ") -
(a + strlen("\nauthor "))));
email = xmemdupz(lb + strlen("<"), rb - (lb + strlen("<")));
- date = xmemdupz(rb + strlen("> "), eol - (rb + strlen("> ")));
len = eol - (rb + strlen("> "));
date = xmalloc(len + 2);
*date = '@';
run_status(stdout, index_file, prefix, 0, s);
if (amend)
fputs(_(empty_amend_advice), stderr);
- else if (whence == FROM_CHERRY_PICK)
+ else if (whence == FROM_CHERRY_PICK) {
fputs(_(empty_cherry_pick_advice), stderr);
+ if (!sequencer_in_use)
+ fputs(_(empty_cherry_pick_advice_single), stderr);
+ else
+ fputs(_(empty_cherry_pick_advice_multi), stderr);
+ }
return 0;
}
static int use_global_config, use_system_config, use_local_config;
static const char *given_config_file;
+static const char *given_config_blob;
static int actions, types;
static const char *get_color_slot, *get_colorbool_slot;
static int end_null;
OPT_BOOLEAN(0, "system", &use_system_config, N_("use system config file")),
OPT_BOOLEAN(0, "local", &use_local_config, N_("use repository config file")),
OPT_STRING('f', "file", &given_config_file, N_("file"), N_("use given config file")),
+ OPT_STRING(0, "blob", &given_config_blob, N_("blob-id"), N_("read config from given blob object")),
OPT_GROUP(N_("Action")),
OPT_BIT(0, "get", &actions, N_("get value: name [value-regex]"), ACTION_GET),
OPT_BIT(0, "get-all", &actions, N_("get all values: key [value-regex]"), ACTION_GET_ALL),
}
git_config_with_options(collect_config, &values,
- given_config_file, respect_includes);
+ given_config_file, given_config_blob,
+ respect_includes);
ret = !values.nr;
get_color_found = 0;
parsed_color[0] = '\0';
git_config_with_options(git_get_color_config, NULL,
- given_config_file, respect_includes);
+ given_config_file, given_config_blob,
+ respect_includes);
if (!get_color_found && def_color)
color_parse(def_color, "command line", parsed_color);
get_diff_color_found = -1;
get_color_ui_found = -1;
git_config_with_options(git_get_colorbool_config, NULL,
- given_config_file, respect_includes);
+ given_config_file, given_config_blob,
+ respect_includes);
if (get_colorbool_found < 0) {
if (!strcmp(get_colorbool_slot, "color.diff"))
return get_colorbool_found ? 0 : 1;
}
+static void check_blob_write(void)
+{
+ if (given_config_blob)
+ die("writing config blobs is not supported");
+}
+
int cmd_config(int argc, const char **argv, const char *prefix)
{
int nongit = !startup_info->have_repository;
builtin_config_usage,
PARSE_OPT_STOP_AT_NON_OPTION);
- if (use_global_config + use_system_config + use_local_config + !!given_config_file > 1) {
+ if (use_global_config + use_system_config + use_local_config +
+ !!given_config_file + !!given_config_blob > 1) {
error("only one config file at a time.");
usage_with_options(builtin_config_usage, builtin_config_options);
}
check_argc(argc, 0, 0);
if (git_config_with_options(show_all_config, NULL,
given_config_file,
+ given_config_blob,
respect_includes) < 0) {
if (given_config_file)
die_errno("unable to read config file '%s'",
check_argc(argc, 0, 0);
if (!given_config_file && nongit)
die("not in a git directory");
+ if (given_config_blob)
+ die("editing blobs is not supported");
git_config(git_default_config, NULL);
launch_editor(given_config_file ?
given_config_file : git_path("config"),
}
else if (actions == ACTION_SET) {
int ret;
+ check_blob_write();
check_argc(argc, 2, 2);
value = normalize_value(argv[0], argv[1]);
ret = git_config_set_in_file(given_config_file, argv[0], value);
return ret;
}
else if (actions == ACTION_SET_ALL) {
+ check_blob_write();
check_argc(argc, 2, 3);
value = normalize_value(argv[0], argv[1]);
return git_config_set_multivar_in_file(given_config_file,
argv[0], value, argv[2], 0);
}
else if (actions == ACTION_ADD) {
+ check_blob_write();
check_argc(argc, 2, 2);
value = normalize_value(argv[0], argv[1]);
return git_config_set_multivar_in_file(given_config_file,
argv[0], value, "^$", 0);
}
else if (actions == ACTION_REPLACE_ALL) {
+ check_blob_write();
check_argc(argc, 2, 3);
value = normalize_value(argv[0], argv[1]);
return git_config_set_multivar_in_file(given_config_file,
return get_value(argv[0], argv[1]);
}
else if (actions == ACTION_UNSET) {
+ check_blob_write();
check_argc(argc, 1, 2);
if (argc == 2)
return git_config_set_multivar_in_file(given_config_file,
argv[0], NULL);
}
else if (actions == ACTION_UNSET_ALL) {
+ check_blob_write();
check_argc(argc, 1, 2);
return git_config_set_multivar_in_file(given_config_file,
argv[0], NULL, argv[1], 1);
}
else if (actions == ACTION_RENAME_SECTION) {
int ret;
+ check_blob_write();
check_argc(argc, 2, 2);
ret = git_config_rename_section_in_file(given_config_file,
argv[0], argv[1]);
}
else if (actions == ACTION_REMOVE_SECTION) {
int ret;
+ check_blob_write();
check_argc(argc, 1, 1);
ret = git_config_rename_section_in_file(given_config_file,
argv[0], NULL);
#include "parse-options.h"
#include "diff.h"
#include "hash.h"
+#include "argv-array.h"
#define SEEN (1u<<0)
#define MAX_TAGS (FLAG_BITS - 1)
die(_("--long is incompatible with --abbrev=0"));
if (contains) {
- const char **args = xmalloc((7 + argc) * sizeof(char *));
- int i = 0;
- args[i++] = "name-rev";
- args[i++] = "--name-only";
- args[i++] = "--no-undefined";
+ struct argv_array args;
+
+ argv_array_init(&args);
+ argv_array_pushl(&args, "name-rev",
+ "--peel-tag", "--name-only", "--no-undefined",
+ NULL);
if (always)
- args[i++] = "--always";
+ argv_array_push(&args, "--always");
if (!all) {
- args[i++] = "--tags";
- if (pattern) {
- char *s = xmalloc(strlen("--refs=refs/tags/") + strlen(pattern) + 1);
- sprintf(s, "--refs=refs/tags/%s", pattern);
- args[i++] = s;
- }
+ argv_array_push(&args, "--tags");
+ if (pattern)
+ argv_array_pushf(&args, "--refs=refs/tags/%s", pattern);
+ }
+ while (*argv) {
+ argv_array_push(&args, *argv);
+ argv++;
}
- memcpy(args + i, argv, argc * sizeof(char *));
- args[i + argc] = NULL;
- return cmd_name_rev(i + argc, args, prefix);
+ return cmd_name_rev(args.argc, args.argv, prefix);
}
init_hash(&names);
int tagged_mark;
struct commit *p;
- /* Trees have no identifer in fast-export output, thus we have no way
+ /* Trees have no identifier in fast-export output, thus we have no way
* to output tags of trees, tags of tags of trees, etc. Simply omit
* such tags.
*/
struct strbuf pathbuf = STRBUF_INIT;
if (opt->relative && opt->prefix_length) {
- quote_path_relative(filename + tree_name_len, -1, &pathbuf,
- opt->prefix);
+ quote_path_relative(filename + tree_name_len, opt->prefix, &pathbuf);
strbuf_insert(&pathbuf, 0, filename, tree_name_len);
} else {
strbuf_addstr(&pathbuf, filename);
struct strbuf buf = STRBUF_INIT;
if (opt->relative && opt->prefix_length)
- quote_path_relative(filename, -1, &buf, opt->prefix);
+ quote_path_relative(filename, opt->prefix, &buf);
else
strbuf_addstr(&buf, filename);
read_cache();
for (nr = 0; nr < active_nr; nr++) {
- struct cache_entry *ce = active_cache[nr];
+ const struct cache_entry *ce = active_cache[nr];
if (!S_ISREG(ce->ce_mode))
continue;
if (!match_pathspec_depth(pathspec, ce->name, ce_namelen(ce), 0, NULL))
return 0;
}
+static int from_callback(const struct option *opt, const char *arg, int unset)
+{
+ char **from = opt->value;
+
+ free(*from);
+
+ if (unset)
+ *from = NULL;
+ else if (arg)
+ *from = xstrdup(arg);
+ else
+ *from = xstrdup(git_committer_info(IDENT_NO_DATE));
+ return 0;
+}
+
int cmd_format_patch(int argc, const char **argv, const char *prefix)
{
struct commit *commit;
int quiet = 0;
int reroll_count = -1;
char *branch_name = NULL;
+ char *from = NULL;
const struct option builtin_format_patch_options[] = {
{ OPTION_CALLBACK, 'n', "numbered", &numbered, NULL,
N_("use [PATCH n/m] even with a single patch"),
0, to_callback },
{ OPTION_CALLBACK, 0, "cc", NULL, N_("email"), N_("add Cc: header"),
0, cc_callback },
+ { OPTION_CALLBACK, 0, "from", &from, N_("ident"),
+ N_("set From address to <ident> (or committer ident if absent)"),
+ PARSE_OPT_OPTARG, from_callback },
OPT_STRING(0, "in-reply-to", &in_reply_to, N_("message-id"),
N_("make first mail a reply to <message-id>")),
{ OPTION_CALLBACK, 0, "attach", &rev, N_("boundary"),
rev.extra_headers = strbuf_detach(&buf, NULL);
+ if (from) {
+ if (split_ident_line(&rev.from_ident, from, strlen(from)))
+ die(_("invalid ident line: %s"), from);
+ }
+
if (start_number < 0)
start_number = 1;
static const char *tag_skip_worktree = "";
static const char *tag_resolve_undo = "";
-static void write_name(const char* name, size_t len)
+static void write_name(const char *name)
{
- write_name_quoted_relative(name, len, prefix, prefix_len, stdout,
- line_terminator);
+ /*
+ * With "--full-name", prefix_len=0; this caller needs to pass
+ * an empty string in that case (a NULL is good for "").
+ */
+ write_name_quoted_relative(name, prefix_len ? prefix : NULL,
+ stdout, line_terminator);
}
static void show_dir_entry(const char *tag, struct dir_entry *ent)
return;
fputs(tag, stdout);
- write_name(ent->name, ent->len);
+ write_name(ent->name);
}
static void show_other_files(struct dir_struct *dir)
}
}
-static void show_ce_entry(const char *tag, struct cache_entry *ce)
+static void show_ce_entry(const char *tag, const struct cache_entry *ce)
{
int len = max_prefix_len;
find_unique_abbrev(ce->sha1,abbrev),
ce_stage(ce));
}
- write_name(ce->name, ce_namelen(ce));
+ write_name(ce->name);
if (debug_mode) {
- struct stat_data *sd = &ce->ce_stat_data;
+ const struct stat_data *sd = &ce->ce_stat_data;
printf(" ctime: %d:%d\n", sd->sd_ctime.sec, sd->sd_ctime.nsec);
printf(" mtime: %d:%d\n", sd->sd_mtime.sec, sd->sd_mtime.nsec);
printf("%s%06o %s %d\t", tag_resolve_undo, ui->mode[i],
find_unique_abbrev(ui->sha1[i], abbrev),
i + 1);
- write_name(path, len);
+ write_name(path);
}
}
}
-static int ce_excluded(struct dir_struct *dir, struct cache_entry *ce)
+static int ce_excluded(struct dir_struct *dir, const struct cache_entry *ce)
{
int dtype = ce_to_dtype(ce);
return is_excluded(dir, ce->name, &dtype);
}
if (show_cached || show_stage) {
for (i = 0; i < active_nr; i++) {
- struct cache_entry *ce = active_cache[i];
+ const struct cache_entry *ce = active_cache[i];
if ((dir->flags & DIR_SHOW_IGNORED) &&
!ce_excluded(dir, ce))
continue;
}
if (show_deleted || show_modified) {
for (i = 0; i < active_nr; i++) {
- struct cache_entry *ce = active_cache[i];
+ const struct cache_entry *ce = active_cache[i];
struct stat st;
int err;
if ((dir->flags & DIR_SHOW_IGNORED) &&
last = active_nr;
while (last > first) {
int next = (last + first) >> 1;
- struct cache_entry *ce = active_cache[next];
+ const struct cache_entry *ce = active_cache[next];
if (!strncmp(ce->name, prefix, max_prefix_len)) {
first = next+1;
continue;
if (found_dup)
continue;
- name = quote_path_relative(pathspec[num], -1, &sb, prefix);
+ name = quote_path_relative(pathspec[num], prefix, &sb);
error("pathspec '%s' did not match any file(s) known to git.",
name);
errors++;
die("git merge-index: %s not in the cache", path);
found = 0;
do {
- struct cache_entry *ce = active_cache[pos];
+ const struct cache_entry *ce = active_cache[pos];
int stage = ce_stage(ce);
if (strcmp(ce->name, path))
{
int i;
for (i = 0; i < active_nr; i++) {
- struct cache_entry *ce = active_cache[i];
+ const struct cache_entry *ce = active_cache[i];
if (!ce_stage(ce))
continue;
i += merge_entry(i, ce->name)-1;
};
static int show_diffstat = 1, shortlog_len = -1, squash;
-static int option_commit = 1, allow_fast_forward = 1;
-static int fast_forward_only, option_edit = -1;
+static int option_commit = 1;
+static int option_edit = -1;
static int allow_trivial = 1, have_message, verify_signatures;
static int overwrite_ignore = 1;
static struct strbuf merge_msg = STRBUF_INIT;
static const char *pull_twohead, *pull_octopus;
+enum ff_type {
+ FF_NO,
+ FF_ALLOW,
+ FF_ONLY
+};
+
+static enum ff_type fast_forward = FF_ALLOW;
+
static int option_parse_message(const struct option *opt,
const char *arg, int unset)
{
return 0;
}
+static int option_parse_ff_only(const struct option *opt,
+ const char *arg, int unset)
+{
+ fast_forward = FF_ONLY;
+ return 0;
+}
+
static struct option builtin_merge_options[] = {
{ OPTION_CALLBACK, 'n', NULL, NULL, NULL,
N_("do not show a diffstat at the end of the merge"),
N_("perform a commit if the merge succeeds (default)")),
OPT_BOOL('e', "edit", &option_edit,
N_("edit message before committing")),
- OPT_BOOLEAN(0, "ff", &allow_fast_forward,
- N_("allow fast-forward (default)")),
- OPT_BOOLEAN(0, "ff-only", &fast_forward_only,
- N_("abort if fast-forward is not possible")),
+ OPT_SET_INT(0, "ff", &fast_forward, N_("allow fast-forward (default)"), FF_ALLOW),
+ { OPTION_CALLBACK, 0, "ff-only", NULL, NULL,
+ N_("abort if fast-forward is not possible"),
+ PARSE_OPT_NOARG | PARSE_OPT_NONEG, option_parse_ff_only },
OPT_RERERE_AUTOUPDATE(&allow_rerere_auto),
OPT_BOOL(0, "verify-signatures", &verify_signatures,
N_("Verify that the named commit has a valid GPG signature")),
else if (!strcmp(k, "merge.ff")) {
int boolval = git_config_maybe_bool(k, v);
if (0 <= boolval) {
- allow_fast_forward = boolval;
+ fast_forward = boolval ? FF_ALLOW : FF_NO;
} else if (v && !strcmp(v, "only")) {
- allow_fast_forward = 1;
- fast_forward_only = 1;
+ fast_forward = FF_ONLY;
} /* do not barf on values from future versions of git */
return 0;
} else if (!strcmp(k, "merge.defaulttoupstream")) {
free_commit_list(common);
parents = remoteheads;
- if (!head_subsumed || !allow_fast_forward)
+ if (!head_subsumed || fast_forward == FF_NO)
commit_list_insert(head, &parents);
strbuf_addch(&merge_msg, '\n');
prepare_to_commit(remoteheads);
die_errno(_("Could not open '%s' for writing"), filename);
fprintf(fp, "\nConflicts:\n");
for (pos = 0; pos < active_nr; pos++) {
- struct cache_entry *ce = active_cache[pos];
+ const struct cache_entry *ce = active_cache[pos];
if (ce_stage(ce)) {
fprintf(fp, "\t%s\n", ce->name);
}
/*
- * Pretend as if the user told us to merge with the tracking
+ * Pretend as if the user told us to merge with the remote-tracking
* branch we have for the upstream of the current branch
*/
static int setup_with_upstream(const char ***argv)
args = xcalloc(branch->merge_nr + 1, sizeof(char *));
for (i = 0; i < branch->merge_nr; i++) {
if (!branch->merge[i]->dst)
- die(_("No remote tracking branch for %s from %s"),
+ die(_("No remote-tracking branch for %s from %s"),
branch->merge[i]->src, branch->remote_name);
args[i] = branch->merge[i]->dst;
}
if (fd < 0)
die_errno(_("Could not open '%s' for writing"), filename);
strbuf_reset(&buf);
- if (!allow_fast_forward)
+ if (fast_forward == FF_NO)
strbuf_addf(&buf, "no-ff");
if (write_in_full(fd, buf.buf, buf.len) != buf.len)
die_errno(_("Could not write to '%s'"), filename);
show_diffstat = 0;
if (squash) {
- if (!allow_fast_forward)
+ if (fast_forward == FF_NO)
die(_("You cannot combine --squash with --no-ff."));
option_commit = 0;
}
- if (!allow_fast_forward && fast_forward_only)
- die(_("You cannot combine --no-ff with --ff-only."));
-
if (!abort_current_merge) {
if (!argc) {
if (default_to_upstream)
"empty head"));
if (squash)
die(_("Squash commit into empty head not supported yet"));
- if (!allow_fast_forward)
+ if (fast_forward == FF_NO)
die(_("Non-fast-forward commit does not make sense into "
"an empty head"));
remoteheads = collect_parents(head_commit, &head_subsumed, argc, argv);
sha1_to_hex(commit->object.sha1));
setenv(buf.buf, merge_remote_util(commit)->name, 1);
strbuf_reset(&buf);
- if (!fast_forward_only &&
+ if (fast_forward != FF_ONLY &&
merge_remote_util(commit) &&
merge_remote_util(commit)->obj &&
merge_remote_util(commit)->obj->type == OBJ_TAG)
- allow_fast_forward = 0;
+ fast_forward = FF_NO;
}
if (option_edit < 0)
for (i = 0; i < use_strategies_nr; i++) {
if (use_strategies[i]->attr & NO_FAST_FORWARD)
- allow_fast_forward = 0;
+ fast_forward = FF_NO;
if (use_strategies[i]->attr & NO_TRIVIAL)
allow_trivial = 0;
}
*/
finish_up_to_date("Already up-to-date.");
goto done;
- } else if (allow_fast_forward && !remoteheads->next &&
+ } else if (fast_forward != FF_NO && !remoteheads->next &&
!common->next &&
!hashcmp(common->item->object.sha1, head_commit->object.sha1)) {
/* Again the most common case of merging one remote. */
* only one common.
*/
refresh_cache(REFRESH_QUIET);
- if (allow_trivial && !fast_forward_only) {
+ if (allow_trivial && fast_forward != FF_ONLY) {
/* See if it is really trivial. */
git_committer_info(IDENT_STRICT);
printf(_("Trying really trivial in-index merge...\n"));
}
}
- if (fast_forward_only)
+ if (fast_forward == FF_ONLY)
die(_("Not possible to fast-forward, aborting."));
/* We are going to make a new commit. */
#include "tag.h"
#include "refs.h"
#include "parse-options.h"
+#include "sha1-lookup.h"
#define CUTOFF_DATE_SLOP 86400 /* one day */
return -1;
}
+static const char *name_ref_abbrev(const char *refname, int shorten_unambiguous)
+{
+ if (shorten_unambiguous)
+ refname = shorten_unambiguous_ref(refname, 0);
+ else if (!prefixcmp(refname, "refs/heads/"))
+ refname = refname + 11;
+ else if (!prefixcmp(refname, "refs/"))
+ refname = refname + 5;
+ return refname;
+}
+
struct name_ref_data {
int tags_only;
int name_only;
const char *ref_filter;
};
+static struct tip_table {
+ struct tip_table_entry {
+ unsigned char sha1[20];
+ const char *refname;
+ } *table;
+ int nr;
+ int alloc;
+ int sorted;
+} tip_table;
+
+static void add_to_tip_table(const unsigned char *sha1, const char *refname,
+ int shorten_unambiguous)
+{
+ refname = name_ref_abbrev(refname, shorten_unambiguous);
+
+ ALLOC_GROW(tip_table.table, tip_table.nr + 1, tip_table.alloc);
+ hashcpy(tip_table.table[tip_table.nr].sha1, sha1);
+ tip_table.table[tip_table.nr].refname = xstrdup(refname);
+ tip_table.nr++;
+ tip_table.sorted = 0;
+}
+
+static int tipcmp(const void *a_, const void *b_)
+{
+ const struct tip_table_entry *a = a_, *b = b_;
+ return hashcmp(a->sha1, b->sha1);
+}
+
static int name_ref(const char *path, const unsigned char *sha1, int flags, void *cb_data)
{
struct object *o = parse_object(sha1);
}
}
+ add_to_tip_table(sha1, path, can_abbreviate_output);
+
while (o && o->type == OBJ_TAG) {
struct tag *t = (struct tag *) o;
if (!t->tagged)
if (o && o->type == OBJ_COMMIT) {
struct commit *commit = (struct commit *)o;
- if (can_abbreviate_output)
- path = shorten_unambiguous_ref(path, 0);
- else if (!prefixcmp(path, "refs/heads/"))
- path = path + 11;
- else if (!prefixcmp(path, "refs/"))
- path = path + 5;
-
+ path = name_ref_abbrev(path, can_abbreviate_output);
name_rev(commit, xstrdup(path), 0, 0, deref);
}
return 0;
}
+static const unsigned char *nth_tip_table_ent(size_t ix, void *table_)
+{
+ struct tip_table_entry *table = table_;
+ return table[ix].sha1;
+}
+
+static const char *get_exact_ref_match(const struct object *o)
+{
+ int found;
+
+ if (!tip_table.table || !tip_table.nr)
+ return NULL;
+
+ if (!tip_table.sorted) {
+ qsort(tip_table.table, tip_table.nr, sizeof(*tip_table.table),
+ tipcmp);
+ tip_table.sorted = 1;
+ }
+
+ found = sha1_pos(o->sha1, tip_table.table, tip_table.nr,
+ nth_tip_table_ent);
+ if (0 <= found)
+ return tip_table.table[found].refname;
+ return NULL;
+}
+
/* returns a static buffer */
static const char *get_rev_name(const struct object *o)
{
struct commit *c;
if (o->type != OBJ_COMMIT)
- return NULL;
+ return get_exact_ref_match(o);
c = (struct commit *) o;
n = c->util;
if (!n)
int cmd_name_rev(int argc, const char **argv, const char *prefix)
{
struct object_array revs = OBJECT_ARRAY_INIT;
- int all = 0, transform_stdin = 0, allow_undefined = 1, always = 0;
+ int all = 0, transform_stdin = 0, allow_undefined = 1, always = 0, peel_tag = 0;
struct name_ref_data data = { 0, 0, NULL };
struct option opts[] = {
OPT_BOOLEAN(0, "name-only", &data.name_only, N_("print only names (no SHA-1)")),
OPT_BOOLEAN(0, "undefined", &allow_undefined, N_("allow to print `undefined` names")),
OPT_BOOLEAN(0, "always", &always,
N_("show abbreviated commit object as fallback")),
+ {
+ /* A Hidden OPT_BOOL */
+ OPTION_SET_INT, 0, "peel-tag", &peel_tag, NULL,
+ N_("dereference tags in the input (internal use)"),
+ PARSE_OPT_NOARG | PARSE_OPT_HIDDEN, NULL, 1,
+ },
OPT_END(),
};
for (; argc; argc--, argv++) {
unsigned char sha1[20];
- struct object *o;
+ struct object *object;
struct commit *commit;
if (get_sha1(*argv, sha1)) {
continue;
}
- o = deref_tag(parse_object(sha1), *argv, 0);
- if (!o || o->type != OBJ_COMMIT) {
- fprintf(stderr, "Could not get commit for %s. Skipping.\n",
+ commit = NULL;
+ object = parse_object(sha1);
+ if (object) {
+ struct object *peeled = deref_tag(object, *argv, 0);
+ if (peeled && peeled->type == OBJ_COMMIT)
+ commit = (struct commit *)peeled;
+ }
+
+ if (!object) {
+ fprintf(stderr, "Could not get object for %s. Skipping.\n",
*argv);
continue;
}
- commit = (struct commit *)o;
- if (cutoff > commit->date)
- cutoff = commit->date;
- add_object_array((struct object *)commit, *argv, &revs);
+ if (commit) {
+ if (cutoff > commit->date)
+ cutoff = commit->date;
+ }
+
+ if (peel_tag) {
+ if (!commit) {
+ fprintf(stderr, "Could not get commit for %s. Skipping.\n",
+ *argv);
+ continue;
+ }
+ object = (struct object *)commit;
+ }
+ add_object_array(object, *argv, &revs);
}
if (cutoff)
if (!short_upstream)
short_upstream = branch->merge[0]->src;
/*
- * Don't show advice for people who explicitely set
+ * Don't show advice for people who explicitly set
* push.default.
*/
if (push_default == PUSH_DEFAULT_UNSPECIFIED)
static const char message_advice_pull_before_push[] =
N_("Updates were rejected because the tip of your current branch is behind\n"
- "its remote counterpart. Merge the remote changes (e.g. 'git pull')\n"
- "before pushing again.\n"
+ "its remote counterpart. Integrate the remote changes (e.g.\n"
+ "'git pull ...') before pushing again.\n"
"See the 'Note about fast-forwards' in 'git push --help' for details.");
static const char message_advice_use_upstream[] =
static const char message_advice_checkout_pull_push[] =
N_("Updates were rejected because a pushed branch tip is behind its remote\n"
- "counterpart. Check out this branch and merge the remote changes\n"
- "(e.g. 'git pull') before pushing again.\n"
+ "counterpart. Check out this branch and integrate the remote changes\n"
+ "(e.g. 'git pull ...') before pushing again.\n"
"See the 'Note about fast-forwards' in 'git push --help' for details.");
static const char message_advice_ref_fetch_first[] =
N_("Updates were rejected because the remote contains work that you do\n"
"not have locally. This is usually caused by another repository pushing\n"
- "to the same ref. You may want to first merge the remote changes (e.g.,\n"
- "'git pull') before pushing again.\n"
+ "to the same ref. You may want to first integrate the remote changes\n"
+ "(e.g., 'git pull ...') before pushing again.\n"
"See the 'Note about fast-forwards' in 'git push --help' for details.");
static const char message_advice_ref_already_exists[] =
static void print_new_head_line(struct commit *commit)
{
const char *hex, *body;
+ char *msg;
hex = find_unique_abbrev(commit->object.sha1, DEFAULT_ABBREV);
printf(_("HEAD is now at %s"), hex);
- body = strstr(commit->buffer, "\n\n");
+ msg = logmsg_reencode(commit, NULL, get_log_output_encoding());
+ body = strstr(msg, "\n\n");
if (body) {
const char *eol;
size_t len;
}
else
printf("\n");
+ logmsg_free(msg, commit);
}
static void update_index_from_diff(struct diff_queue_struct *q,
ctx.date_mode = revs->date_mode;
ctx.date_mode_explicit = revs->date_mode_explicit;
ctx.fmt = revs->commit_format;
+ ctx.output_encoding = get_log_output_encoding();
pretty_print_commit(&ctx, commit, &buf);
if (revs->graph) {
if (buf.len) {
return 0;
}
+LAST_ARG_MUST_BE_NULL
static void verify_opt_compatible(const char *me, const char *base_opt, ...)
{
const char *this_opt;
die(_("%s: %s cannot be used with %s"), me, this_opt, base_opt);
}
+LAST_ARG_MUST_BE_NULL
static void verify_opt_mutually_compatible(const char *me, ...)
{
const char *opt1, *opt2 = NULL;
}
}
+static void error_removing_concrete_submodules(struct string_list *files, int *errs)
+{
+ print_error_files(files,
+ Q_("the following submodule (or one of its nested "
+ "submodules)\n"
+ "uses a .git directory:",
+ "the following submodules (or one of its nested "
+ "submodules)\n"
+ "use a .git directory:", files->nr),
+ _("\n(use 'rm -rf' if you really want to remove "
+ "it including all of its history)"),
+ errs);
+ string_list_clear(files, 0);
+}
+
static int check_submodules_use_gitfiles(void)
{
int i;
for (i = 0; i < list.nr; i++) {
const char *name = list.entry[i].name;
int pos;
- struct cache_entry *ce;
+ const struct cache_entry *ce;
struct stat st;
pos = cache_name_pos(name, strlen(name));
if (!submodule_uses_gitfile(name))
string_list_append(&files, name);
}
- print_error_files(&files,
- Q_("the following submodule (or one of its nested "
- "submodules)\n uses a .git directory:",
- "the following submodules (or one of its nested "
- "submodules)\n use a .git directory:",
- files.nr),
- _("\n(use 'rm -rf' if you really want to remove "
- "it including all of its history)"),
- &errs);
- string_list_clear(&files, 0);
+
+ error_removing_concrete_submodules(&files, &errs);
return errs;
}
for (i = 0; i < list.nr; i++) {
struct stat st;
int pos;
- struct cache_entry *ce;
+ const struct cache_entry *ce;
const char *name = list.entry[i].name;
unsigned char sha1[20];
unsigned mode;
" or -f to force removal)"),
&errs);
string_list_clear(&files_cached, 0);
- print_error_files(&files_submodule,
- Q_("the following submodule (or one of its nested "
- "submodule)\nuses a .git directory:",
- "the following submodules (or one of its nested "
- "submodule)\nuse a .git directory:",
- files_submodule.nr),
- _("\n(use 'rm -rf' if you really "
- "want to remove it including all "
- "of its history)"),
- &errs);
- string_list_clear(&files_submodule, 0);
+
+ error_removing_concrete_submodules(&files_submodule, &errs);
+
print_error_files(&files_local,
Q_("the following file has local modifications:",
"the following files have local modifications:",
seen = xcalloc(i, 1);
for (i = 0; i < active_nr; i++) {
- struct cache_entry *ce = active_cache[i];
+ const struct cache_entry *ce = active_cache[i];
if (!match_pathspec(pathspec, ce->name, ce_namelen(ce), 0, seen))
continue;
ALLOC_GROW(list.entry, list.nr + 1, list.alloc);
ctx.subject = "";
ctx.after_subject = "";
ctx.date_mode = DATE_NORMAL;
+ ctx.output_encoding = get_log_output_encoding();
pretty_print_commit(&ctx, commit, &ufbuf);
buffer = ufbuf.buf;
} else if (*buffer) {
OPT_SET_INT(0, "sparse", &dense,
N_("show merges reachable from only one tip"), 0),
OPT_SET_INT(0, "date-order", &sort_order,
- N_("show commits where no parent comes before its "
- "children"),
+ N_("topologically sort, maintaining date order "
+ "where possible"),
REV_SORT_BY_COMMIT_DATE),
{ OPTION_CALLBACK, 'g', "reflog", &reflog_base, N_("<n>[,<base>]"),
N_("show <n> most recent ref-log entries starting at "
const char *hex;
unsigned char peeled[20];
+ if (show_head && !strcmp(refname, "HEAD"))
+ goto match;
+
if (tags_only || heads_only) {
int match;
OPT_BOOLEAN(0, "verify", &verify, N_("stricter reference checking, "
"requires exact ref path")),
{ OPTION_BOOLEAN, 'h', NULL, &show_head, NULL,
- N_("show the HEAD reference"),
+ N_("show the HEAD reference, even if it would be filtered out"),
PARSE_OPT_NOARG | PARSE_OPT_HIDDEN },
- OPT_BOOLEAN(0, "head", &show_head, N_("show the HEAD reference")),
+ OPT_BOOLEAN(0, "head", &show_head,
+ N_("show the HEAD reference, even if it would be filtered out")),
OPT_BOOLEAN('d', "dereference", &deref_tags,
N_("dereference tags into object IDs")),
{ OPTION_CALLBACK, 's', "hash", &abbrev, N_("n"),
return error("lstat(\"%s\"): %s", path, strerror(errno));
}
-static int add_one_path(struct cache_entry *old, const char *path, int len, struct stat *st)
+static int add_one_path(const struct cache_entry *old, const char *path, int len, struct stat *st)
{
int option, size;
struct cache_entry *ce;
/* Exact match: file or existing gitlink */
if (pos >= 0) {
- struct cache_entry *ce = active_cache[pos];
+ const struct cache_entry *ce = active_cache[pos];
if (S_ISGITLINK(ce->ce_mode)) {
/* Do nothing to the index if there is no HEAD! */
/* Inexact match: is there perhaps a subdirectory match? */
pos = -pos-1;
while (pos < active_nr) {
- struct cache_entry *ce = active_cache[pos++];
+ const struct cache_entry *ce = active_cache[pos++];
if (strncmp(ce->name, path, len))
break;
{
int pos, len;
struct stat st;
- struct cache_entry *ce;
+ const struct cache_entry *ce;
len = strlen(path);
if (has_symlink_leading_path(path, len))
/* already merged */
pos = unmerge_cache_entry_at(pos);
if (pos < active_nr) {
- struct cache_entry *ce = active_cache[pos];
+ const struct cache_entry *ce = active_cache[pos];
if (ce_stage(ce) &&
ce_namelen(ce) == namelen &&
!memcmp(ce->name, path, namelen))
*/
pos = -pos-1;
if (pos < active_nr) {
- struct cache_entry *ce = active_cache[pos];
+ const struct cache_entry *ce = active_cache[pos];
if (ce_namelen(ce) == namelen &&
!memcmp(ce->name, path, namelen)) {
fprintf(stderr,
has_head = 0;
redo:
for (pos = 0; pos < active_nr; pos++) {
- struct cache_entry *ce = active_cache[pos];
+ const struct cache_entry *ce = active_cache[pos];
struct cache_entry *old = NULL;
int save_nr;
cache_tree_invalidate_path(down->cache_tree, slash + 1);
}
-static int verify_cache(struct cache_entry **cache,
+static int verify_cache(const struct cache_entry * const *cache,
int entries, int flags)
{
int i, funny;
/* Verify that the tree is merged */
funny = 0;
for (i = 0; i < entries; i++) {
- struct cache_entry *ce = cache[i];
+ const struct cache_entry *ce = cache[i];
if (ce_stage(ce)) {
if (silent)
return -1;
}
static int update_one(struct cache_tree *it,
- struct cache_entry **cache,
+ const struct cache_entry * const *cache,
int entries,
const char *base,
int baselen,
*/
i = 0;
while (i < entries) {
- struct cache_entry *ce = cache[i];
+ const struct cache_entry *ce = cache[i];
struct cache_tree_sub *sub;
const char *path, *slash;
int pathlen, sublen, subcnt, subskip;
i = 0;
while (i < entries) {
- struct cache_entry *ce = cache[i];
+ const struct cache_entry *ce = cache[i];
struct cache_tree_sub *sub;
const char *path, *slash;
int pathlen, entlen;
}
int cache_tree_update(struct cache_tree *it,
- struct cache_entry **cache,
+ const struct cache_entry * const *cache,
int entries,
int flags)
{
was_valid = cache_tree_fully_valid(active_cache_tree);
if (!was_valid) {
if (cache_tree_update(active_cache_tree,
- active_cache, active_nr,
- flags) < 0)
+ (const struct cache_entry * const *)active_cache,
+ active_nr, flags) < 0)
return WRITE_TREE_UNMERGED_INDEX;
if (0 <= newfd) {
if (!write_cache(newfd, active_cache, active_nr) &&
if (!the_index.cache_tree)
the_index.cache_tree = cache_tree();
return cache_tree_update(the_index.cache_tree,
- the_index.cache, the_index.cache_nr, flags);
+ (const struct cache_entry * const *)the_index.cache,
+ the_index.cache_nr, flags);
}
struct cache_tree *cache_tree_read(const char *buffer, unsigned long size);
int cache_tree_fully_valid(struct cache_tree *);
-int cache_tree_update(struct cache_tree *, struct cache_entry **, int, int);
+int cache_tree_update(struct cache_tree *, const struct cache_entry * const *, int, int);
int update_main_cache_tree(int);
extern int set_git_dir_init(const char *git_dir, const char *real_git_dir, int);
extern int init_db(const char *template_dir, unsigned int flags);
+extern void sanitize_stdfds(void);
+
#define alloc_nr(x) (((x)+16)*3/2)
/*
extern int add_to_index(struct index_state *, const char *path, struct stat *, int flags);
extern int add_file_to_index(struct index_state *, const char *path, int flags);
extern struct cache_entry *make_cache_entry(unsigned int mode, const unsigned char *sha1, const char *path, int stage, int refresh);
-extern int ce_same_name(struct cache_entry *a, struct cache_entry *b);
+extern int ce_same_name(const struct cache_entry *a, const struct cache_entry *b);
extern int index_name_is_other(const struct index_state *, const char *, int);
extern void *read_blob_data_from_index(struct index_state *, const char *, unsigned long *);
extern int ie_match_stat(const struct index_state *, const struct cache_entry *, struct stat *, unsigned int);
extern int ie_modified(const struct index_state *, const struct cache_entry *, struct stat *, unsigned int);
-#define PATHSPEC_ONESTAR 1 /* the pathspec pattern sastisfies GFNM_ONESTAR */
+#define PATHSPEC_ONESTAR 1 /* the pathspec pattern satisfies GFNM_ONESTAR */
struct pathspec {
const char **raw; /* get_pathspec() result, not freed by free_pathspec() */
extern int prefer_symlink_refs;
extern int log_all_ref_updates;
extern int warn_ambiguous_refs;
+extern int warn_on_object_refname_ambiguity;
extern int shared_repository;
extern const char *apply_default_whitespace;
extern const char *apply_default_ignorewhitespace;
const char *real_path(const char *path);
const char *real_path_if_valid(const char *path);
const char *absolute_path(const char *path);
-const char *relative_path(const char *abs, const char *base);
+const char *relative_path(const char *in, const char *prefix, struct strbuf *sb);
int normalize_path_copy(char *dst, const char *src);
int longest_ancestor_length(const char *path, struct string_list *prefixes);
char *strip_path_suffix(const char *path, const char *suffix);
struct object_info {
/* Request */
+ enum object_type *typep;
unsigned long *sizep;
+ unsigned long *disk_sizep;
/* Response */
enum {
typedef int (*config_fn_t)(const char *, const char *, void *);
extern int git_default_config(const char *, const char *, void *);
extern int git_config_from_file(config_fn_t fn, const char *, void *);
+extern int git_config_from_buf(config_fn_t fn, const char *name,
+ const char *buf, size_t len, void *data);
extern void git_config_push_parameter(const char *text);
extern int git_config_from_parameters(config_fn_t fn, void *data);
extern int git_config(config_fn_t fn, void *);
extern int git_config_with_options(config_fn_t fn, void *,
- const char *filename, int respect_includes);
+ const char *filename,
+ const char *blob_ref,
+ int respect_includes);
extern int git_config_early(config_fn_t fn, void *, const char *repo_config);
extern int git_parse_ulong(const char *, unsigned long *);
extern int git_config_int(const char *, const char *);
/*
* Coalesce new lines into base by finding the LCS
- * - Create the table to run dynamic programing
+ * - Create the table to run dynamic programming
* - Compute the LCS
* - Then reverse read the direction structure:
* - If we have MATCH, assign parent to base flag, and consume
git-cat-file plumbinginterrogators
git-check-attr purehelpers
git-check-ignore purehelpers
+git-check-mailmap purehelpers
git-checkout mainporcelain common
git-checkout-index plumbingmanipulators
git-check-ref-format purehelpers
if (!stride) \
stride = 1; \
s->stride = stride; \
- elem_size = sizeof(struct slabname) * stride; \
+ elem_size = sizeof(elemtype) * stride; \
s->slab_size = COMMIT_SLAB_SIZE / elem_size; \
s->slab_count = 0; \
s->slab = NULL; \
static elemtype *slabname## _at(struct slabname *s, \
const struct commit *c) \
{ \
- int nth_slab, nth_slot, ix; \
+ int nth_slab, nth_slot; \
\
- ix = c->index * s->stride; \
- nth_slab = ix / s->slab_size; \
- nth_slot = ix % s->slab_size; \
+ nth_slab = c->index / s->slab_size; \
+ nth_slot = c->index % s->slab_size; \
\
if (s->slab_count <= nth_slab) { \
int i; \
} \
if (!s->slab[nth_slab]) \
s->slab[nth_slab] = xcalloc(s->slab_size, \
- sizeof(**s->slab)); \
- return &s->slab[nth_slab][nth_slot]; \
+ sizeof(**s->slab) * s->stride); \
+ return &s->slab[nth_slab][nth_slot * s->stride]; \
} \
\
static int stat_ ##slabname## realloc
return 0;
}
-static int compare_commits_by_commit_date(const void *a_, const void *b_, void *unused)
+int compare_commits_by_commit_date(const void *a_, const void *b_, void *unused)
{
const struct commit *a = a_, *b = b_;
/* newer commits with larger date first */
static int find_invalid_utf8(const char *buf, int len)
{
int offset = 0;
+ static const unsigned int max_codepoint[] = {
+ 0x7f, 0x7ff, 0xffff, 0x10ffff
+ };
while (len) {
unsigned char c = *buf++;
int bytes, bad_offset;
+ unsigned int codepoint;
+ unsigned int min_val, max_val;
len--;
offset++;
bytes++;
}
- /* Must be between 1 and 5 more bytes */
- if (bytes < 1 || bytes > 5)
+ /*
+ * Must be between 1 and 3 more bytes. Longer sequences result in
+ * codepoints beyond U+10FFFF, which are guaranteed never to exist.
+ */
+ if (bytes < 1 || 3 < bytes)
return bad_offset;
/* Do we *have* that many bytes? */
if (len < bytes)
return bad_offset;
+ /*
+ * Place the encoded bits at the bottom of the value and compute the
+ * valid range.
+ */
+ codepoint = (c & 0x7f) >> bytes;
+ min_val = max_codepoint[bytes-1] + 1;
+ max_val = max_codepoint[bytes];
+
offset += bytes;
len -= bytes;
/* And verify that they are good continuation bytes */
do {
+ codepoint <<= 6;
+ codepoint |= *buf & 0x3f;
if ((*buf++ & 0xc0) != 0x80)
return bad_offset;
} while (--bytes);
- /* We could/should check the value and length here too */
+ /* Reject codepoints that are out of range for the sequence length. */
+ if (codepoint < min_val || codepoint > max_val)
+ return bad_offset;
+ /* Surrogates are only for UTF-16 and cannot be encoded in UTF-8. */
+ if ((codepoint & 0x1ff800) == 0xd800)
+ return bad_offset;
+ /* U+xxFFFE and U+xxFFFF are guaranteed non-characters. */
+ if ((codepoint & 0xfffe) == 0xfffe)
+ return bad_offset;
+ /* So are anything in the range U+FDD0..U+FDEF. */
+ if (codepoint >= 0xfdd0 && codepoint <= 0xfdef)
+ return bad_offset;
}
return -1;
}
*
* If it isn't, it assumes any non-utf8 characters are Latin1,
* and does the conversion.
- *
- * Fixme: we should probably also disallow overlong forms and
- * invalid characters. But we don't do that currently.
*/
static int verify_utf8(struct strbuf *buf)
{
#include "strbuf.h"
#include "decorate.h"
#include "gpg-interface.h"
+#include "string-list.h"
struct commit_list {
struct commit *item;
};
struct pretty_print_context {
+ /*
+ * Callers should tweak these to change the behavior of pp_* functions.
+ */
enum cmit_fmt fmt;
int abbrev;
const char *subject;
const char *output_encoding;
struct string_list *mailmap;
int color;
+ struct ident_split *from_ident;
+
+ /*
+ * Fields below here are manipulated internally by pp_* functions and
+ * should not be counted on by callers.
+ */
+ struct string_list in_body_headers;
};
struct userformat_want {
extern void format_commit_message(const struct commit *commit,
const char *format, struct strbuf *sb,
const struct pretty_print_context *context);
-extern void pretty_print_commit(const struct pretty_print_context *pp,
+extern void pretty_print_commit(struct pretty_print_context *pp,
const struct commit *commit,
struct strbuf *sb);
extern void pp_commit_easy(enum cmit_fmt fmt, const struct commit *commit,
struct strbuf *sb);
-void pp_user_info(const struct pretty_print_context *pp,
+void pp_user_info(struct pretty_print_context *pp,
const char *what, struct strbuf *sb,
const char *line, const char *encoding);
-void pp_title_line(const struct pretty_print_context *pp,
+void pp_title_line(struct pretty_print_context *pp,
const char **msg_p,
struct strbuf *sb,
const char *encoding,
int need_8bit_cte);
-void pp_remainder(const struct pretty_print_context *pp,
+void pp_remainder(struct pretty_print_context *pp,
const char **msg_p,
struct strbuf *sb,
int indent);
*/
extern void check_commit_signature(const struct commit* commit, struct signature_check *sigc);
+int compare_commits_by_commit_date(const void *a_, const void *b_, void *unused);
+
#endif /* COMMIT_H */
+++ /dev/null
-#define CYGWIN_C
-#define WIN32_LEAN_AND_MEAN
-#include <sys/stat.h>
-#include <sys/errno.h>
-#include "win32.h"
-#include "../git-compat-util.h"
-#include "../cache.h" /* to read configuration */
-
-/*
- * Return POSIX permission bits, regardless of core.ignorecygwinfstricks
- */
-int cygwin_get_st_mode_bits(const char *path, int *mode)
-{
- struct stat st;
- if (lstat(path, &st) < 0)
- return -1;
- *mode = st.st_mode;
- return 0;
-}
-
-static inline void filetime_to_timespec(const FILETIME *ft, struct timespec *ts)
-{
- long long winTime = ((long long)ft->dwHighDateTime << 32) +
- ft->dwLowDateTime;
- winTime -= 116444736000000000LL; /* Windows to Unix Epoch conversion */
- /* convert 100-nsecond interval to seconds and nanoseconds */
- ts->tv_sec = (time_t)(winTime/10000000);
- ts->tv_nsec = (long)(winTime - ts->tv_sec*10000000LL) * 100;
-}
-
-#define size_to_blocks(s) (((s)+511)/512)
-
-/* do_stat is a common implementation for cygwin_lstat and cygwin_stat.
- *
- * To simplify its logic, in the case of cygwin symlinks, this implementation
- * falls back to the cygwin version of stat/lstat, which is provided as the
- * last argument.
- */
-static int do_stat(const char *file_name, struct stat *buf, stat_fn_t cygstat)
-{
- WIN32_FILE_ATTRIBUTE_DATA fdata;
-
- if (file_name[0] == '/')
- return cygstat (file_name, buf);
-
- if (!(errno = get_file_attr(file_name, &fdata))) {
- /*
- * If the system attribute is set and it is not a directory then
- * it could be a symbol link created in the nowinsymlinks mode.
- * Normally, Cygwin works in the winsymlinks mode, so this situation
- * is very unlikely. For the sake of simplicity of our code, let's
- * Cygwin to handle it.
- */
- if ((fdata.dwFileAttributes & FILE_ATTRIBUTE_SYSTEM) &&
- !(fdata.dwFileAttributes & FILE_ATTRIBUTE_DIRECTORY))
- return cygstat(file_name, buf);
-
- /* fill out the stat structure */
- buf->st_dev = buf->st_rdev = 0; /* not used by Git */
- buf->st_ino = 0;
- buf->st_mode = file_attr_to_st_mode(fdata.dwFileAttributes);
- buf->st_nlink = 1;
- buf->st_uid = buf->st_gid = 0;
-#ifdef __CYGWIN_USE_BIG_TYPES__
- buf->st_size = ((_off64_t)fdata.nFileSizeHigh << 32) +
- fdata.nFileSizeLow;
-#else
- buf->st_size = (off_t)fdata.nFileSizeLow;
-#endif
- buf->st_blocks = size_to_blocks(buf->st_size);
- filetime_to_timespec(&fdata.ftLastAccessTime, &buf->st_atim);
- filetime_to_timespec(&fdata.ftLastWriteTime, &buf->st_mtim);
- filetime_to_timespec(&fdata.ftCreationTime, &buf->st_ctim);
- return 0;
- } else if (errno == ENOENT) {
- /*
- * In the winsymlinks mode (which is the default), Cygwin
- * emulates symbol links using Windows shortcut files. These
- * files are formed by adding .lnk extension. So, if we have
- * not found the specified file name, it could be that it is
- * a symbol link. Let's Cygwin to deal with that.
- */
- return cygstat(file_name, buf);
- }
- return -1;
-}
-
-/* We provide our own lstat/stat functions, since the provided Cygwin versions
- * of these functions are too slow. These stat functions are tailored for Git's
- * usage, and therefore they are not meant to be complete and correct emulation
- * of lstat/stat functionality.
- */
-static int cygwin_lstat(const char *path, struct stat *buf)
-{
- return do_stat(path, buf, lstat);
-}
-
-static int cygwin_stat(const char *path, struct stat *buf)
-{
- return do_stat(path, buf, stat);
-}
-
-
-/*
- * At start up, we are trying to determine whether Win32 API or cygwin stat
- * functions should be used. The choice is determined by core.ignorecygwinfstricks.
- * Reading this option is not always possible immediately as git_dir may
- * not be set yet. So until it is set, use cygwin lstat/stat functions.
- * However, if core.filemode is set, we must use the Cygwin posix
- * stat/lstat as the Windows stat functions do not determine posix filemode.
- *
- * Note that git_cygwin_config() does NOT call git_default_config() and this
- * is deliberate. Many commands read from config to establish initial
- * values in variables and later tweak them from elsewhere (e.g. command line).
- * init_stat() is called lazily on demand, typically much late in the program,
- * and calling git_default_config() from here would break such variables.
- */
-static int native_stat = 1;
-static int core_filemode = 1; /* matches trust_executable_bit default */
-
-static int git_cygwin_config(const char *var, const char *value, void *cb)
-{
- if (!strcmp(var, "core.ignorecygwinfstricks"))
- native_stat = git_config_bool(var, value);
- else if (!strcmp(var, "core.filemode"))
- core_filemode = git_config_bool(var, value);
- return 0;
-}
-
-static int init_stat(void)
-{
- if (have_git_dir() && git_config(git_cygwin_config,NULL)) {
- if (!core_filemode && native_stat) {
- cygwin_stat_fn = cygwin_stat;
- cygwin_lstat_fn = cygwin_lstat;
- } else {
- cygwin_stat_fn = stat;
- cygwin_lstat_fn = lstat;
- }
- return 0;
- }
- return 1;
-}
-
-static int cygwin_stat_stub(const char *file_name, struct stat *buf)
-{
- return (init_stat() ? stat : *cygwin_stat_fn)(file_name, buf);
-}
-
-static int cygwin_lstat_stub(const char *file_name, struct stat *buf)
-{
- return (init_stat() ? lstat : *cygwin_lstat_fn)(file_name, buf);
-}
-
-stat_fn_t cygwin_stat_fn = cygwin_stat_stub;
-stat_fn_t cygwin_lstat_fn = cygwin_lstat_stub;
-
+++ /dev/null
-#include <sys/types.h>
-#include <sys/stat.h>
-
-typedef int (*stat_fn_t)(const char*, struct stat*);
-extern stat_fn_t cygwin_stat_fn;
-extern stat_fn_t cygwin_lstat_fn;
-int cygwin_get_st_mode_bits(const char *path, int *mode);
-
-#define get_st_mode_bits(p,m) cygwin_get_st_mode_bits((p),(m))
-#ifndef CYGWIN_C
-/* cygwin.c needs the original lstat() */
-#define stat(path, buf) (*cygwin_stat_fn)(path, buf)
-#define lstat(path, buf) (*cygwin_lstat_fn)(path, buf)
-#endif
v1.04alpha_svn915 7th October 2006:
* Fixed failure to unlock thread cache list if allocating a new list failed.
-Thanks to Dmitry Chichkov for reporting this. Futher thanks to Aleksey Sanin.
+Thanks to Dmitry Chichkov for reporting this. Further thanks to Aleksey Sanin.
* Fixed realloc(0, <size>) segfaulting. Thanks to Dmitry Chichkov for
reporting this.
* Made config defines #ifndef so they can be overridden by the build system.
and choose its bk node as its replacement.
2. If x was the last node of its size, but not a leaf node, it must
be replaced with a leaf node (not merely one with an open left or
- right), to make sure that lefts and rights of descendents
- correspond properly to bit masks. We use the rightmost descendent
+ right), to make sure that lefts and rights of descendants
+ correspond properly to bit masks. We use the rightmost descendant
of x. We could use any other leaf, but this is easy to locate and
tends to counteract removal of leftmosts elsewhere, and so keeps
paths shorter than minimally guaranteed. This doesn't loop much
Build the range expression which starts from START_ELEM, and ends
at END_ELEM. The result are written to MBCSET and SBCSET.
RANGE_ALLOC is the allocated size of mbcset->range_starts, and
- mbcset->range_ends, is a pointer argument sinse we may
+ mbcset->range_ends, is a pointer argument since we may
update it. */
static reg_errcode_t
const int32_t *symb_table;
const unsigned char *extra;
- /* Local function for parse_bracket_exp used in _LIBC environement.
+ /* Local function for parse_bracket_exp used in _LIBC environment.
Seek the collating symbol entry correspondings to NAME.
Return the index of the symbol in the SYMB_TABLE. */
return UINT_MAX;
}
- /* Local function for parse_bracket_exp used in _LIBC environement.
+ /* Local function for parse_bracket_exp used in _LIBC environment.
Build the range expression which starts from START_ELEM, and ends
at END_ELEM. The result are written to MBCSET and SBCSET.
RANGE_ALLOC is the allocated size of mbcset->range_starts, and
- mbcset->range_ends, is a pointer argument sinse we may
+ mbcset->range_ends, is a pointer argument since we may
update it. */
auto inline reg_errcode_t
return REG_NOERROR;
}
- /* Local function for parse_bracket_exp used in _LIBC environement.
+ /* Local function for parse_bracket_exp used in _LIBC environment.
Build the collating element which is represented by NAME.
The result are written to MBCSET and SBCSET.
COLL_SYM_ALLOC is the allocated size of mbcset->coll_sym, is a
- pointer argument sinse we may update it. */
+ pointer argument since we may update it. */
auto inline reg_errcode_t
__attribute ((always_inline))
Build the equivalence class which is represented by NAME.
The result are written to MBCSET and SBCSET.
EQUIV_CLASS_ALLOC is the allocated size of mbcset->equiv_classes,
- is a pointer argument sinse we may update it. */
+ is a pointer argument since we may update it. */
static reg_errcode_t
#ifdef RE_ENABLE_I18N
Build the character class which is represented by NAME.
The result are written to MBCSET and SBCSET.
CHAR_CLASS_ALLOC is the allocated size of mbcset->char_classes,
- is a pointer argument sinse we may update it. */
+ is a pointer argument since we may update it. */
static reg_errcode_t
#ifdef RE_ENABLE_I18N
rval = 0;
- /* I hope we needn't fill ther regs with -1's when no match was found. */
+ /* I hope we needn't fill their regs with -1's when no match was found. */
if (result != REG_NOERROR)
rval = -1;
else if (regs != NULL)
FL_LONGEST_MATCH means we want the POSIX longest matching.
If P_MATCH_FIRST is not NULL, and the match fails, it is set to the
next place where we may want to try matching.
- Note that the matcher assume that the maching starts from the current
+ Note that the matcher assume that the matching starts from the current
index of the buffer. */
static int
dfa->nexts[node_idx]))
/* The node can't accept the `multi byte', or the
destination was already thrown away, then the node
- could't accept the current input `multi byte'. */
+ couldn't accept the current input `multi byte'. */
naccepted = 0;
/* Otherwise, it is sure that the node could accept
`naccepted' bytes input. */
void gitunsetenv (const char *name)
{
+#if !defined(__MINGW32__)
+ extern char **environ;
+#endif
int src, dst;
size_t nmln;
#include "strbuf.h"
#include "quote.h"
-typedef struct config_file {
- struct config_file *prev;
- FILE *f;
+struct config_source {
+ struct config_source *prev;
+ union {
+ FILE *file;
+ struct config_buf {
+ const char *buf;
+ size_t len;
+ size_t pos;
+ } buf;
+ } u;
const char *name;
+ int die_on_error;
int linenr;
int eof;
struct strbuf value;
struct strbuf var;
-} config_file;
-static config_file *cf;
+ int (*fgetc)(struct config_source *c);
+ int (*ungetc)(int c, struct config_source *conf);
+ long (*ftell)(struct config_source *c);
+};
+
+static struct config_source *cf;
static int zlib_compression_seen;
+static int config_file_fgetc(struct config_source *conf)
+{
+ return fgetc(conf->u.file);
+}
+
+static int config_file_ungetc(int c, struct config_source *conf)
+{
+ return ungetc(c, conf->u.file);
+}
+
+static long config_file_ftell(struct config_source *conf)
+{
+ return ftell(conf->u.file);
+}
+
+
+static int config_buf_fgetc(struct config_source *conf)
+{
+ if (conf->u.buf.pos < conf->u.buf.len)
+ return conf->u.buf.buf[conf->u.buf.pos++];
+
+ return EOF;
+}
+
+static int config_buf_ungetc(int c, struct config_source *conf)
+{
+ if (conf->u.buf.pos > 0)
+ return conf->u.buf.buf[--conf->u.buf.pos];
+
+ return EOF;
+}
+
+static long config_buf_ftell(struct config_source *conf)
+{
+ return conf->u.buf.pos;
+}
+
#define MAX_INCLUDE_DEPTH 10
static const char include_depth_advice[] =
"exceeded maximum include depth (%d) while including\n"
static int get_next_char(void)
{
- int c;
- FILE *f;
-
- c = '\n';
- if (cf && ((f = cf->f) != NULL)) {
- c = fgetc(f);
- if (c == '\r') {
- /* DOS like systems */
- c = fgetc(f);
- if (c != '\n') {
- ungetc(c, f);
- c = '\r';
- }
- }
- if (c == '\n')
- cf->linenr++;
- if (c == EOF) {
- cf->eof = 1;
- c = '\n';
+ int c = cf->fgetc(cf);
+
+ if (c == '\r') {
+ /* DOS like systems */
+ c = cf->fgetc(cf);
+ if (c != '\n') {
+ cf->ungetc(c, cf);
+ c = '\r';
}
}
+ if (c == '\n')
+ cf->linenr++;
+ if (c == EOF) {
+ cf->eof = 1;
+ c = '\n';
+ }
return c;
}
}
}
-static int git_parse_file(config_fn_t fn, void *data)
+static int git_parse_source(config_fn_t fn, void *data)
{
int comment = 0;
int baselen = 0;
if (get_value(fn, data, var) < 0)
break;
}
- die("bad config file line %d in %s", cf->linenr, cf->name);
+ if (cf->die_on_error)
+ die("bad config file line %d in %s", cf->linenr, cf->name);
+ else
+ return error("bad config file line %d in %s", cf->linenr, cf->name);
}
static int parse_unit_factor(const char *end, uintmax_t *val)
return 0;
}
+/*
+ * All source specific fields in the union, die_on_error, name and the callbacks
+ * fgetc, ungetc, ftell of top need to be initialized before calling
+ * this function.
+ */
+static int do_config_from(struct config_source *top, config_fn_t fn, void *data)
+{
+ int ret;
+
+ /* push config-file parsing state stack */
+ top->prev = cf;
+ top->linenr = 1;
+ top->eof = 0;
+ strbuf_init(&top->value, 1024);
+ strbuf_init(&top->var, 1024);
+ cf = top;
+
+ ret = git_parse_source(fn, data);
+
+ /* pop config-file parsing state stack */
+ strbuf_release(&top->value);
+ strbuf_release(&top->var);
+ cf = top->prev;
+
+ return ret;
+}
+
int git_config_from_file(config_fn_t fn, const char *filename, void *data)
{
int ret;
ret = -1;
if (f) {
- config_file top;
+ struct config_source top;
- /* push config-file parsing state stack */
- top.prev = cf;
- top.f = f;
+ top.u.file = f;
top.name = filename;
- top.linenr = 1;
- top.eof = 0;
- strbuf_init(&top.value, 1024);
- strbuf_init(&top.var, 1024);
- cf = ⊤
-
- ret = git_parse_file(fn, data);
+ top.die_on_error = 1;
+ top.fgetc = config_file_fgetc;
+ top.ungetc = config_file_ungetc;
+ top.ftell = config_file_ftell;
- /* pop config-file parsing state stack */
- strbuf_release(&top.value);
- strbuf_release(&top.var);
- cf = top.prev;
+ ret = do_config_from(&top, fn, data);
fclose(f);
}
return ret;
}
+int git_config_from_buf(config_fn_t fn, const char *name, const char *buf,
+ size_t len, void *data)
+{
+ struct config_source top;
+
+ top.u.buf.buf = buf;
+ top.u.buf.len = len;
+ top.u.buf.pos = 0;
+ top.name = name;
+ top.die_on_error = 0;
+ top.fgetc = config_buf_fgetc;
+ top.ungetc = config_buf_ungetc;
+ top.ftell = config_buf_ftell;
+
+ return do_config_from(&top, fn, data);
+}
+
+static int git_config_from_blob_sha1(config_fn_t fn,
+ const char *name,
+ const unsigned char *sha1,
+ void *data)
+{
+ enum object_type type;
+ char *buf;
+ unsigned long size;
+ int ret;
+
+ buf = read_sha1_file(sha1, &type, &size);
+ if (!buf)
+ return error("unable to load config blob object '%s'", name);
+ if (type != OBJ_BLOB) {
+ free(buf);
+ return error("reference '%s' does not point to a blob", name);
+ }
+
+ ret = git_config_from_buf(fn, name, buf, size, data);
+ free(buf);
+
+ return ret;
+}
+
+static int git_config_from_blob_ref(config_fn_t fn,
+ const char *name,
+ void *data)
+{
+ unsigned char sha1[20];
+
+ if (get_sha1(name, sha1) < 0)
+ return error("unable to resolve config blob '%s'", name);
+ return git_config_from_blob_sha1(fn, name, sha1, data);
+}
+
const char *git_etc_gitconfig(void)
{
static const char *system_wide;
}
int git_config_with_options(config_fn_t fn, void *data,
- const char *filename, int respect_includes)
+ const char *filename,
+ const char *blob_ref,
+ int respect_includes)
{
char *repo_config = NULL;
int ret;
*/
if (filename)
return git_config_from_file(fn, filename, data);
+ else if (blob_ref)
+ return git_config_from_blob_ref(fn, blob_ref, data);
repo_config = git_pathdup("config");
ret = git_config_early(fn, data, repo_config);
int git_config(config_fn_t fn, void *data)
{
- return git_config_with_options(fn, data, NULL, 1);
+ return git_config_with_options(fn, data, NULL, NULL, 1);
}
/*
{
const char *ep;
size_t section_len;
- FILE *f = cf->f;
switch (store.state) {
case KEY_SEEN:
return 1;
}
- store.offset[store.seen] = ftell(f);
+ store.offset[store.seen] = cf->ftell(cf);
store.seen++;
}
break;
* Do not increment matches: this is no match, but we
* just made sure we are in the desired section.
*/
- store.offset[store.seen] = ftell(f);
+ store.offset[store.seen] = cf->ftell(cf);
/* fallthru */
case SECTION_END_SEEN:
case START:
if (matches(key, value)) {
- store.offset[store.seen] = ftell(f);
+ store.offset[store.seen] = cf->ftell(cf);
store.state = KEY_SEEN;
store.seen++;
} else {
if (strrchr(key, '.') - key == store.baselen &&
!strncmp(key, store.key, store.baselen)) {
store.state = SECTION_SEEN;
- store.offset[store.seen] = ftell(f);
+ store.offset[store.seen] = cf->ftell(cf);
}
}
}
NO_SYMLINK_HEAD = YesPlease
NO_IPV6 = YesPlease
OLD_ICONV = UnfortunatelyYes
+ NO_THREAD_SAFE_PREAD = YesPlease
+ # There are conflicting reports about this.
+ # On some boxes NO_MMAP is needed, and not so elsewhere.
+ # Try commenting this out if you suspect MMAP is more efficient
+ NO_MMAP = YesPlease
+ else
+ NO_REGEX = UnfortunatelyYes
endif
- NO_THREAD_SAFE_PREAD = YesPlease
NEEDS_LIBICONV = YesPlease
NO_FAST_WORKING_DIRECTORY = UnfortunatelyYes
- NO_TRUSTABLE_FILEMODE = UnfortunatelyYes
NO_ST_BLOCKS_IN_STRUCT_STAT = YesPlease
- # There are conflicting reports about this.
- # On some boxes NO_MMAP is needed, and not so elsewhere.
- # Try commenting this out if you suspect MMAP is more efficient
- NO_MMAP = YesPlease
X = .exe
- COMPAT_OBJS += compat/cygwin.o
UNRELIABLE_FSTAT = UnfortunatelyYes
SPARSE_FLAGS = -isystem /usr/include/w32api -Wno-one-bit-signed-bitfield
endif
# The template used to generate the XML messages to CIA. You can make
# visible changes to the IRC-bot notification lines by hacking this.
-# The default will produce a notfication line that looks like this:
+# The default will produce a notification line that looks like this:
#
# ${project}: ${author} ${repo}:${branch} * ${rev} ${files}: ${logmsg} ${url}
#
# done
#
# The reason for the tac call is that git rev-list emits commits from
-# most recent to least - better to ship notifactions from oldest to newest.
+# most recent to least - better to ship notifications from oldest to newest.
#
# Configuration variables affecting this script:
#
# down. It is unknown whether this is still an issue in 2010, but
# XML-RPC would be annoying to do from sh in any case. (XML-RPC does
# have the advantage that it guarantees notification of multiple commits
-# shpped from an update in their actual order.)
+# shipped from an update in their actual order.)
#
# The project as known to CIA. You can set this with a -p option,
cat-file) : plumbing;;
check-attr) : plumbing;;
check-ignore) : plumbing;;
+ check-mailmap) : plumbing;;
check-ref-format) : plumbing;;
checkout-index) : plumbing;;
commit-tree) : plumbing;;
core.fileMode
core.fsyncobjectfiles
core.gitProxy
- core.ignoreCygwinFSTricks
core.ignoreStat
core.ignorecase
core.logAllRefUpdates
--*=*|*.) ;;
*) c="$c " ;;
esac
- array+=("$c")
+ array[$#array+1]="$c"
done
compset -P '*[=:]'
compadd -Q -S '' -p "${2-}" -a -- array && _ret=0
--- /dev/null
+#!/usr/bin/perl
+
+# List people who might be interested in a patch. Useful as the argument to
+# git-send-email --cc-cmd option, and in other situations.
+#
+# Usage: git contacts <file | rev-list option> ...
+
+use strict;
+use warnings;
+use IPC::Open2;
+
+my $since = '5-years-ago';
+my $min_percent = 10;
+my $labels_rx = qr/Signed-off-by|Reviewed-by|Acked-by|Cc/i;
+my %seen;
+
+sub format_contact {
+ my ($name, $email) = @_;
+ return "$name <$email>";
+}
+
+sub parse_commit {
+ my ($commit, $data) = @_;
+ my $contacts = $commit->{contacts};
+ my $inbody = 0;
+ for (split(/^/m, $data)) {
+ if (not $inbody) {
+ if (/^author ([^<>]+) <(\S+)> .+$/) {
+ $contacts->{format_contact($1, $2)} = 1;
+ } elsif (/^$/) {
+ $inbody = 1;
+ }
+ } elsif (/^$labels_rx:\s+([^<>]+)\s+<(\S+?)>$/o) {
+ $contacts->{format_contact($1, $2)} = 1;
+ }
+ }
+}
+
+sub import_commits {
+ my ($commits) = @_;
+ return unless %$commits;
+ my $pid = open2 my $reader, my $writer, qw(git cat-file --batch);
+ for my $id (keys(%$commits)) {
+ print $writer "$id\n";
+ my $line = <$reader>;
+ if ($line =~ /^([0-9a-f]{40}) commit (\d+)/) {
+ my ($cid, $len) = ($1, $2);
+ die "expected $id but got $cid\n" unless $id eq $cid;
+ my $data;
+ # cat-file emits newline after data, so read len+1
+ read $reader, $data, $len + 1;
+ parse_commit($commits->{$id}, $data);
+ }
+ }
+ close $reader;
+ close $writer;
+ waitpid($pid, 0);
+ die "git-cat-file error: $?\n" if $?;
+}
+
+sub get_blame {
+ my ($commits, $source, $start, $len, $from) = @_;
+ $len = 1 unless defined($len);
+ return if $len == 0;
+ open my $f, '-|',
+ qw(git blame --porcelain -C), '-L', "$start,+$len",
+ '--since', $since, "$from^", '--', $source or die;
+ while (<$f>) {
+ if (/^([0-9a-f]{40}) \d+ \d+ \d+$/) {
+ my $id = $1;
+ $commits->{$id} = { id => $id, contacts => {} }
+ unless $seen{$id};
+ $seen{$id} = 1;
+ }
+ }
+ close $f;
+}
+
+sub scan_patches {
+ my ($commits, $id, $f) = @_;
+ my $source;
+ while (<$f>) {
+ if (/^From ([0-9a-f]{40}) Mon Sep 17 00:00:00 2001$/) {
+ $id = $1;
+ $seen{$id} = 1;
+ }
+ next unless $id;
+ if (m{^--- (?:a/(.+)|/dev/null)$}) {
+ $source = $1;
+ } elsif (/^--- /) {
+ die "Cannot parse hunk source: $_\n";
+ } elsif (/^@@ -(\d+)(?:,(\d+))?/ && $source) {
+ get_blame($commits, $source, $1, $2, $id);
+ }
+ }
+}
+
+sub scan_patch_file {
+ my ($commits, $file) = @_;
+ open my $f, '<', $file or die "read failure: $file: $!\n";
+ scan_patches($commits, undef, $f);
+ close $f;
+}
+
+sub parse_rev_args {
+ my @args = @_;
+ open my $f, '-|',
+ qw(git rev-parse --revs-only --default HEAD --symbolic), @args
+ or die;
+ my @revs;
+ while (<$f>) {
+ chomp;
+ push @revs, $_;
+ }
+ close $f;
+ return @revs if scalar(@revs) != 1;
+ return "^$revs[0]", 'HEAD' unless $revs[0] =~ /^-/;
+ return $revs[0], 'HEAD';
+}
+
+sub scan_rev_args {
+ my ($commits, $args) = @_;
+ my @revs = parse_rev_args(@$args);
+ open my $f, '-|', qw(git rev-list --reverse), @revs or die;
+ while (<$f>) {
+ chomp;
+ my $id = $_;
+ $seen{$id} = 1;
+ open my $g, '-|', qw(git show -C --oneline), $id or die;
+ scan_patches($commits, $id, $g);
+ close $g;
+ }
+ close $f;
+}
+
+sub mailmap_contacts {
+ my ($contacts) = @_;
+ my %mapped;
+ my $pid = open2 my $reader, my $writer, qw(git check-mailmap --stdin);
+ for my $contact (keys(%$contacts)) {
+ print $writer "$contact\n";
+ my $canonical = <$reader>;
+ chomp $canonical;
+ $mapped{$canonical} += $contacts->{$contact};
+ }
+ close $reader;
+ close $writer;
+ waitpid($pid, 0);
+ die "git-check-mailmap error: $?\n" if $?;
+ return \%mapped;
+}
+
+if (!@ARGV) {
+ die "No input revisions or patch files\n";
+}
+
+my (@files, @rev_args);
+for (@ARGV) {
+ if (-e) {
+ push @files, $_;
+ } else {
+ push @rev_args, $_;
+ }
+}
+
+my %commits;
+for (@files) {
+ scan_patch_file(\%commits, $_);
+}
+if (@rev_args) {
+ scan_rev_args(\%commits, \@rev_args)
+}
+import_commits(\%commits);
+
+my $contacts = {};
+for my $commit (values %commits) {
+ for my $contact (keys %{$commit->{contacts}}) {
+ $contacts->{$contact}++;
+ }
+}
+$contacts = mailmap_contacts($contacts);
+
+my $ncommits = scalar(keys %commits);
+for my $contact (keys %$contacts) {
+ my $percent = $contacts->{$contact} * 100 / $ncommits;
+ next if $percent < $min_percent;
+ print "$contact\n";
+}
--- /dev/null
+git-contacts(1)
+===============
+
+NAME
+----
+git-contacts - List people who might be interested in a set of changes
+
+
+SYNOPSIS
+--------
+[verse]
+'git contacts' (<patch>|<range>|<rev>)...
+
+
+DESCRIPTION
+-----------
+
+Given a set of changes, specified as patch files or revisions, determine people
+who might be interested in those changes. This is done by consulting the
+history of each patch or revision hunk to find people mentioned by commits
+which touched the lines of files under consideration.
+
+Input consists of one or more patch files or revision arguments. A revision
+argument can be a range or a single `<rev>` which is interpreted as
+`<rev>..HEAD`, thus the same revision arguments are accepted as for
+linkgit:git-format-patch[1]. Patch files and revision arguments can be combined
+in the same invocation.
+
+This command can be useful for determining the list of people with whom to
+discuss proposed changes, or for finding the list of recipients to Cc: when
+submitting a patch series via `git send-email`. For the latter case, `git
+contacts` can be used as the argument to `git send-email`'s `--cc-cmd` option.
+
+
+DISCUSSION
+----------
+
+`git blame` is invoked for each hunk in a patch file or revision. For each
+commit mentioned by `git blame`, the commit message is consulted for people who
+authored, reviewed, signed, acknowledged, or were Cc:'d. Once the list of
+participants is known, each person's relevance is computed by considering how
+many commits mentioned that person compared with the total number of commits
+under consideration. The final output consists only of participants who exceed
+a minimum threshold of participation.
+
+
+OUTPUT
+------
+
+For each person of interest, a single line is output, terminated by a newline.
+If the person's name is known, ``Name $$<user@host>$$'' is printed; otherwise
+only ``$$<user@host>$$'' is printed.
+
+
+EXAMPLES
+--------
+
+* Consult patch files:
++
+------------
+$ git contacts feature/*.patch
+------------
+
+* Revision range:
++
+------------
+$ git contacts R1..R2
+------------
+
+* From a single revision to `HEAD`:
++
+------------
+$ git contacts origin
+------------
+
+* Helper for `git send-email`:
++
+------------
+$ git send-email --cc-cmd='git contacts' feature/*.patch
+------------
+
+
+LIMITATIONS
+-----------
+
+Several conditions controlling a person's significance are currently
+hard-coded, such as minimum participation level (10%), blame date-limiting (5
+years), and `-C` level for detecting moved and copied lines (a single `-C`). In
+the future, these conditions may become configurable.
+
+
+GIT
+---
+Part of the linkgit:git[1] suite
os.system('git ls-files -x .hg --deleted | git update-index --remove --stdin')
# commit
- os.system(getgitenv(user, date) + 'git commit --allow-empty -a -F %s' % filecomment)
+ os.system(getgitenv(user, date) + 'git commit --allow-empty --allow-empty-message -a -F %s' % filecomment)
os.unlink(filecomment)
# tag
--- /dev/null
+ git-multimail
+ =============
+
+git-multimail is a tool for sending notification emails on pushes to a
+Git repository. It includes a Python module called git_multimail.py,
+which can either be used as a hook script directly or can be imported
+as a Python module into another script.
+
+git-multimail is derived from the Git project's old
+contrib/hooks/post-receive-email, and is mostly compatible with that
+script. See README.migrate-from-post-receive-email for details about
+the differences and for how to migrate from post-receive-email to
+git-multimail.
+
+git-multimail, like the rest of the Git project, is licensed under
+GPLv2 (see the COPYING file for details).
+
+Please note: although, as a convenience, git-multimail may be
+distributed along with the main Git project, development of
+git-multimail takes place in its own, separate project. See section
+"Getting involved" below for more information.
+
+
+By default, for each push received by the repository, git-multimail:
+
+1. Outputs one email summarizing each reference that was changed.
+ These "reference change" (called "refchange" below) emails describe
+ the nature of the change (e.g., was the reference created, deleted,
+ fast-forwarded, etc.) and include a one-line summary of each commit
+ that was added to the reference.
+
+2. Outputs one email for each new commit that was introduced by the
+ reference change. These "commit" emails include a list of the
+ files changed by the commit, followed by the diffs of files
+ modified by the commit. The commit emails are threaded to the
+ corresponding reference change email via "In-Reply-To". This style
+ (similar to the "git format-patch" style used on the Git mailing
+ list) makes it easy to scan through the emails, jump to patches
+ that need further attention, and write comments about specific
+ commits. Commits are handled in reverse topological order (i.e.,
+ parents shown before children). For example,
+
+ [git] branch master updated
+ + [git] 01/08: doc: fix xref link from api docs to manual pages
+ + [git] 02/08: api-credentials.txt: show the big picture first
+ + [git] 03/08: api-credentials.txt: mention credential.helper explicitly
+ + [git] 04/08: api-credentials.txt: add "see also" section
+ + [git] 05/08: t3510 (cherry-pick-sequence): add missing '&&'
+ + [git] 06/08: Merge branch 'rr/maint-t3510-cascade-fix'
+ + [git] 07/08: Merge branch 'mm/api-credentials-doc'
+ + [git] 08/08: Git 1.7.11-rc2
+
+ Each commit appears in exactly one commit email, the first time
+ that it is pushed to the repository. If a commit is later merged
+ into another branch, then a one-line summary of the commit is
+ included in the reference change email (as usual), but no
+ additional commit email is generated.
+
+ By default, reference change emails have their "Reply-To" field set
+ to the person who pushed the change, and commit emails have their
+ "Reply-To" field set to the author of the commit.
+
+3. Output one "announce" mail for each new annotated tag, including
+ information about the tag and optionally a shortlog describing the
+ changes since the previous tag. Such emails might be useful if you
+ use annotated tags to mark releases of your project.
+
+
+Requirements
+------------
+
+* Python 2.x, version 2.4 or later. No non-standard Python modules
+ are required. git-multimail does *not* currently work with Python
+ 3.x.
+
+ The example scripts invoke Python using the following shebang line
+ (following PEP 394 [1]):
+
+ #! /usr/bin/env python2
+
+ If your system's Python2 interpreter is not in your PATH or is not
+ called "python2", you can change the lines accordingly. Or you can
+ invoke the Python interpreter explicitly, for example via a tiny
+ shell script like
+
+ #! /bin/sh
+ /usr/local/bin/python /path/to/git_multimail.py "$@"
+
+* The "git" command must be in your PATH. git-multimail is known to
+ work with Git versions back to 1.7.1. (Earlier versions have not
+ been tested; if you do so, please report your results.)
+
+* To send emails using the default configuration, a standard sendmail
+ program must be located at '/usr/sbin/sendmail' and configured
+ correctly to send emails. If this is not the case, see the
+ multimailhook.mailer configuration variable below for how to
+ configure git-multimail to send emails via an SMTP server.
+
+
+Invocation
+----------
+
+git_multimail.py is designed to be used as a "post-receive" hook in a
+Git repository (see githooks(5)). Link or copy it to
+$GIT_DIR/hooks/post-receive within the repository for which email
+notifications are desired. Usually it should be installed on the
+central repository for a project, to which all commits are eventually
+pushed.
+
+For use on pre-v1.5.1 Git servers, git_multimail.py can also work as
+an "update" hook, taking its arguments on the command line. To use
+this script in this manner, link or copy it to $GIT_DIR/hooks/update.
+Please note that the script is not completely reliable in this mode
+[2].
+
+Alternatively, git_multimail.py can be imported as a Python module
+into your own Python post-receive script. This method is a bit more
+work, but allows the behavior of the hook to be customized using
+arbitrary Python code. For example, you can use a custom environment
+(perhaps inheriting from GenericEnvironment or GitoliteEnvironment) to
+
+* change how the user who did the push is determined
+
+* read users' email addresses from an LDAP server or from a database
+
+* decide which users should be notified about which commits based on
+ the contents of the commits (e.g., for users who want to be notified
+ only about changes affecting particular files or subdirectories)
+
+Or you can change how emails are sent by writing your own Mailer
+class. The "post-receive" script in this directory demonstrates how
+to use git_multimail.py as a Python module. (If you make interesting
+changes of this type, please consider sharing them with the
+community.)
+
+
+Configuration
+-------------
+
+By default, git-multimail mostly takes its configuration from the
+following "git config" settings:
+
+multimailhook.environment
+
+ This describes the general environment of the repository.
+ Currently supported values:
+
+ "generic" -- the username of the pusher is read from $USER and the
+ repository name is derived from the repository's path.
+
+ "gitolite" -- the username of the pusher is read from $GL_USER and
+ the repository name from $GL_REPO.
+
+ If neither of these environments is suitable for your setup, then
+ you can implement a Python class that inherits from Environment
+ and instantiate it via a script that looks like the example
+ post-receive script.
+
+ The environment value can be specified on the command line using
+ the --environment option. If it is not specified on the command
+ line or by multimailhook.environment, then it defaults to
+ "gitolite" if the environment contains variables $GL_USER and
+ $GL_REPO; otherwise "generic".
+
+multimailhook.repoName
+
+ A short name of this Git repository, to be used in various places
+ in the notification email text. The default is to use $GL_REPO
+ for gitolite repositories, or otherwise to derive this value from
+ the repository path name.
+
+multimailhook.mailinglist
+
+ The list of email addresses to which notification emails should be
+ sent, as RFC 2822 email addresses separated by commas. This
+ configuration option can be multivalued. Leave it unset or set it
+ to the empty string to not send emails by default. The next few
+ settings can be used to configure specific address lists for
+ specific types of notification email.
+
+multimailhook.refchangeList
+
+ The list of email addresses to which summary emails about
+ reference changes should be sent, as RFC 2822 email addresses
+ separated by commas. This configuration option can be
+ multivalued. The default is the value in
+ multimailhook.mailinglist. Set this value to the empty string to
+ prevent reference change emails from being sent.
+
+multimailhook.announceList
+
+ The list of email addresses to which emails about new annotated
+ tags should be sent, as RFC 2822 email addresses separated by
+ commas. This configuration option can be multivalued. The
+ default is the value in multimailhook.refchangelist or
+ multimailhook.mailinglist. Set this value to the empty string to
+ prevent annotated tag announcement emails from being sent.
+
+multimailhook.commitList
+
+ The list of email addresses to which emails about individual new
+ commits should be sent, as RFC 2822 email addresses separated by
+ commas. This configuration option can be multivalued. The
+ default is the value in multimailhook.mailinglist. Set this value
+ to the empty string to prevent notification emails about
+ individual commits from being sent.
+
+multimailhook.announceShortlog
+
+ If this option is set to true, then emails about changes to
+ annotated tags include a shortlog of changes since the previous
+ tag. This can be useful if the annotated tags represent releases;
+ then the shortlog will be a kind of rough summary of what has
+ happened since the last release. But if your tagging policy is
+ not so straightforward, then the shortlog might be confusing
+ rather than useful. Default is false.
+
+multimailhook.refchangeShowLog
+
+ If this option is set to true, then summary emails about reference
+ changes will include a detailed log of the added commits in
+ addition to the one line summary. The log is generated by running
+ "git log" with the options specified in multimailhook.logOpts.
+ Default is false.
+
+multimailhook.mailer
+
+ This option changes the way emails are sent. Accepted values are:
+
+ - sendmail (the default): use the command /usr/sbin/sendmail or
+ /usr/lib/sendmail (or sendmailCommand, if configured). This
+ mode can be further customized via the following options:
+
+ multimailhook.sendmailCommand
+
+ The command used by mailer "sendmail" to send emails. Shell
+ quoting is allowed in the value of this setting, but remember that
+ Git requires double-quotes to be escaped; e.g.,
+
+ git config multimailhook.sendmailcommand '/usr/sbin/sendmail -t -F \"Git Repo\"'
+
+ Default is '/usr/sbin/sendmail -t' or '/usr/lib/sendmail
+ -t' (depending on which file is present and executable).
+
+ multimailhook.envelopeSender
+
+ If set then pass this value to sendmail via the -f option to set
+ the envelope sender address.
+
+ - smtp: use Python's smtplib. This is useful when the sendmail
+ command is not available on the system. This mode can be
+ further customized via the following options:
+
+ multimailhook.smtpServer
+
+ The name of the SMTP server to connect to. The value can
+ also include a colon and a port number; e.g.,
+ "mail.example.com:25". Default is 'localhost' using port
+ 25.
+
+ multimailhook.envelopeSender
+
+ The sender address to be passed to the SMTP server. If
+ unset, then the value of multimailhook.from is used.
+
+multimailhook.from
+
+ If set then use this value in the From: field of generated emails.
+ If unset, then use the repository's user configuration (user.name
+ and user.email). If user.email is also unset, then use
+ multimailhook.envelopeSender.
+
+multimailhook.administrator
+
+ The name and/or email address of the administrator of the Git
+ repository; used in FOOTER_TEMPLATE. Default is
+ multimailhook.envelopesender if it is set; otherwise a generic
+ string is used.
+
+multimailhook.emailPrefix
+
+ All emails have this string prepended to their subjects, to aid
+ email filtering (though filtering based on the X-Git-* email
+ headers is probably more robust). Default is the short name of
+ the repository in square brackets; e.g., "[myrepo]".
+
+multimailhook.emailMaxLines
+
+ The maximum number of lines that should be included in the body of
+ a generated email. If not specified, there is no limit. Lines
+ beyond the limit are suppressed and counted, and a final line is
+ added indicating the number of suppressed lines.
+
+multimailhook.emailMaxLineLength
+
+ The maximum length of a line in the email body. Lines longer than
+ this limit are truncated to this length with a trailing " [...]"
+ added to indicate the missing text. The default is 500, because
+ (a) diffs with longer lines are probably from binary files, for
+ which a diff is useless, and (b) even if a text file has such long
+ lines, the diffs are probably unreadable anyway. To disable line
+ truncation, set this option to 0.
+
+multimailhook.maxCommitEmails
+
+ The maximum number of commit emails to send for a given change.
+ When the number of patches is larger that this value, only the
+ summary refchange email is sent. This can avoid accidental
+ mailbombing, for example on an initial push. To disable commit
+ emails limit, set this option to 0. The default is 500.
+
+multimailhook.emailStrictUTF8
+
+ If this boolean option is set to "true", then the main part of the
+ email body is forced to be valid UTF-8. Any characters that are
+ not valid UTF-8 are converted to the Unicode replacement
+ character, U+FFFD. The default is "true".
+
+multimailhook.diffOpts
+
+ Options passed to "git diff-tree" when generating the summary
+ information for ReferenceChange emails. Default is "--stat
+ --summary --find-copies-harder". Add -p to those options to
+ include a unified diff of changes in addition to the usual summary
+ output. Shell quoting is allowed; see multimailhook.logOpts for
+ details.
+
+multimailhook.logOpts
+
+ Options passed to "git log" to generate additional info for
+ reference change emails (used only if refchangeShowLog is set).
+ For example, adding --graph will show the graph of revisions, -p
+ will show the complete diff, etc. The default is empty.
+
+ Shell quoting is allowed; for example, a log format that contains
+ spaces can be specified using something like:
+
+ git config multimailhook.logopts '--pretty=format:"%h %aN <%aE>%n%s%n%n%b%n"'
+
+ If you want to set this by editing your configuration file
+ directly, remember that Git requires double-quotes to be escaped
+ (see git-config(1) for more information):
+
+ [multimailhook]
+ logopts = --pretty=format:\"%h %aN <%aE>%n%s%n%n%b%n\"
+
+multimailhook.emailDomain
+
+ Domain name appended to the username of the person doing the push
+ to convert it into an email address (via "%s@%s" % (username,
+ emaildomain)). More complicated schemes can be implemented by
+ overriding Environment and overriding its get_pusher_email()
+ method.
+
+multimailhook.replyTo
+multimailhook.replyToCommit
+multimailhook.replyToRefchange
+
+ Addresses to use in the Reply-To: field for commit emails
+ (replyToCommit) and refchange emails (replyToRefchange).
+ multimailhook.replyTo is used as default when replyToCommit or
+ replyToRefchange is not set. The value for these variables can be
+ either:
+
+ - An email address, which will be used directly.
+
+ - The value "pusher", in which case the pusher's address (if
+ available) will be used. This is the default for refchange
+ emails.
+
+ - The value "author" (meaningful only for replyToCommit), in which
+ case the commit author's address will be used. This is the
+ default for commit emails.
+
+ - The value "none", in which case the Reply-To: field will be
+ omitted.
+
+
+Email filtering aids
+--------------------
+
+All emails include extra headers to enable fine tuned filtering and
+give information for debugging. All emails include the headers
+"X-Git-Repo", "X-Git-Refname", and "X-Git-Reftype". ReferenceChange
+emails also include headers "X-Git-Oldrev" and "X-Git-Newrev";
+Revision emails also include header "X-Git-Rev".
+
+
+Customizing email contents
+--------------------------
+
+git-multimail mostly generates emails by expanding templates. The
+templates can be customized. To avoid the need to edit
+git_multimail.py directly, the preferred way to change the templates
+is to write a separate Python script that imports git_multimail.py as
+a module, then replaces the templates in place. See the provided
+post-receive script for an example of how this is done.
+
+
+Customizing git-multimail for your environment
+----------------------------------------------
+
+git-multimail is mostly customized via an "environment" that describes
+the local environment in which Git is running. Two types of
+environment are built in:
+
+* GenericEnvironment: a stand-alone Git repository.
+
+* GitoliteEnvironment: a Git repository that is managed by gitolite
+ [3]. For such repositories, the identity of the pusher is read from
+ environment variable $GL_USER, and the name of the repository is
+ read from $GL_REPO (if it is not overridden by
+ multimailhook.reponame).
+
+By default, git-multimail assumes GitoliteEnvironment if $GL_USER and
+$GL_REPO are set, and otherwise assumes GenericEnvironment.
+Alternatively, you can choose one of these two environments explicitly
+by setting a "multimailhook.environment" config setting (which can
+have the value "generic" or "gitolite") or by passing an --environment
+option to the script.
+
+If you need to customize the script in ways that are not supported by
+the existing environments, you can define your own environment class
+class using arbitrary Python code. To do so, you need to import
+git_multimail.py as a Python module, as demonstrated by the example
+post-receive script. Then implement your environment class; it should
+usually inherit from one of the existing Environment classes and
+possibly one or more of the EnvironmentMixin classes. Then set the
+"environment" variable to an instance of your own environment class
+and pass it to run_as_post_receive_hook().
+
+The standard environment classes, GenericEnvironment and
+GitoliteEnvironment, are in fact themselves put together out of a
+number of mixin classes, each of which handles one aspect of the
+customization. For the finest control over your configuration, you
+can specify exactly which mixin classes your own environment class
+should inherit from, and override individual methods (or even add your
+own mixin classes) to implement entirely new behaviors. If you
+implement any mixins that might be useful to other people, please
+consider sharing them with the community!
+
+
+Getting involved
+----------------
+
+git-multimail is an open-source project, built by volunteers. We
+would welcome your help!
+
+The current maintainer is Michael Haggerty <mhagger@alum.mit.edu>.
+
+General discussion of git-multimail takes place on the main Git
+mailing list,
+
+ git@vger.kernel.org
+
+Please CC emails regarding git-multimail to me so that I don't
+overlook them.
+
+The git-multimail project itself is currently hosted on GitHub:
+
+ https://github.com/mhagger/git-multimail
+
+We use the GitHub issue tracker to keep track of bugs and feature
+requests, and GitHub pull requests to exchange patches (though, if you
+prefer, you can send patches via the Git mailing list with cc to me).
+
+Please note that although a copy of git-multimail will probably be
+distributed in the "contrib" section of the main Git project,
+development takes place in the separate git-multimail repository on
+GitHub! (Whenever enough changes to git-multimail have accumulated, a
+new code-drop of git-multimail will be submitted for inclusion in the
+Git project.)
+
+
+Footnotes
+---------
+
+[1] http://www.python.org/dev/peps/pep-0394/
+
+[2] Because of the way information is passed to update hooks, the
+ script's method of determining whether a commit has already been
+ seen does not work when it is used as an "update" script. In
+ particular, no notification email will be generated for a new
+ commit that is added to multiple references in the same push.
+
+[3] https://github.com/sitaramc/gitolite
--- /dev/null
+This copy of git-multimail is distributed as part of the "contrib"
+section of the Git project as a convenience to Git users.
+git-multimail is developed as an independent project at the following
+website:
+
+ https://github.com/mhagger/git-multimail
+
+The version in this directory was obtained from the upstream project
+on 2013-07-14 and consists of the "git-multimail" subdirectory from
+revision
+
+ 1a5cb09c698a74d15a715a86b09ead5f56bf4b06
+
+Please see the README file in this directory for information about how
+to report bugs or contribute to git-multimail.
--- /dev/null
+git-multimail is close to, but not exactly, a plug-in replacement for
+the old Git project script contrib/hooks/post-receive-email. This
+document describes the differences and explains how to configure
+git-multimail to get behavior closest to that of post-receive-email.
+
+If you are in a hurry
+=====================
+
+A script called migrate-mailhook-config is included with
+git-multimail. If you run this script within a Git repository that is
+configured to use post-receive-email, it will convert the
+configuration settings into the approximate equivalent settings for
+git-multimail. For more information, run
+
+ migrate-mailhook-config --help
+
+
+Configuration differences
+=========================
+
+* The names of the config options for git-multimail are in namespace
+ "multimailhook.*" instead of "hooks.*". (Editorial comment:
+ post-receive-email should never have used such a generic top-level
+ namespace.)
+
+* In emails about new annotated tags, post-receive-email includes a
+ shortlog of all changes since the previous annotated tag. To get
+ this behavior with git-multimail, you need to set
+ multimailhook.announceshortlog to true:
+
+ git config multimailhook.announceshortlog true
+
+* multimailhook.commitlist -- This is a new configuration variable.
+ Recipients listed here will receive a separate email for each new
+ commit. However, if this variable is *not* set, it defaults to the
+ value of multimailhook.mailinglist. Therefore, if you *don't* want
+ the members of multimailhook.mailinglist to receive one email per
+ commit, then set this value to the empty string:
+
+ git config multimailhook.commitlist ''
+
+* multimailhook.emailprefix -- If this value is not set, then the
+ subjects of generated emails are prefixed with the short name of the
+ repository enclosed in square brackets; e.g., "[myrepo]".
+ post-receive-email defaults to prefix "[SCM]" if this option is not
+ set. So if you were using the old default and want to retain it
+ (for example, to avoid having to change your email filters), set
+ this variable explicitly to the old value:
+
+ git config multimailhook.emailprefix "[SCM]"
+
+* The "multimailhook.showrev" configuration option is not supported.
+ Its main use is obsoleted by the one-email-per-commit feature of
+ git-multimail.
+
+
+Other differences
+=================
+
+This section describes other differences in the behavior of
+git-multimail vs. post-receive-email. For full details, please refer
+to the main README file:
+
+* One email per commit. For each reference change, the script first
+ outputs one email summarizing the reference change (including
+ one-line summaries of the new commits), then it outputs a separate
+ email for each new commit that was introduced, including patches.
+ These one-email-per-commit emails go to the addresses listed in
+ multimailhook.commitlist. post-receive-email sends only one email
+ for each *reference* that is changed, no matter how many commits
+ were added to the reference.
+
+* Better algorithm for detecting new commits. post-receive-email
+ processes one reference change at a time, which causes it to fail to
+ describe new commits that were included in multiple branches. For
+ example, if a single push adds the "*" commits in the diagram below,
+ then post-receive-email would never include the details of the two
+ commits that are common to "master" and "branch" in its
+ notifications.
+
+ o---o---o---*---*---* <-- master
+ \
+ *---* <-- branch
+
+ git-multimail analyzes all reference modifications to determine
+ which commits were not present before the change, therefore avoiding
+ that error.
+
+* In reference change emails, git-multimail tells which commits have
+ been added to the reference vs. are entirely new to the repository,
+ and which commits that have been omitted from the reference
+ vs. entirely discarded from the repository.
+
+* The environment in which Git is running can be configured via an
+ "Environment" abstraction.
+
+* Built-in support for Gitolite-managed repositories.
+
+* Instead of using full SHA1 object names in emails, git-multimail
+ mostly uses abbreviated SHA1s, plus one-line log message summaries
+ where appropriate.
+
+* In the schematic diagrams that explain non-fast-forward commits,
+ git-multimail shows the names of the branches involved.
+
+* The emails generated by git-multimail include the name of the Git
+ repository that was modified; this is convenient for recipients who
+ are monitoring multiple repositories.
+
+* git-multimail allows the email "From" addresses to be configured.
+
+* The recipients lists (multimailhook.mailinglist,
+ multimailhook.refchangelist, multimailhook.announcelist, and
+ multimailhook.commitlist) can be comma-separated values and/or
+ multivalued settings in the config file; e.g.,
+
+ [multimailhook]
+ mailinglist = mr.brown@example.com, mr.black@example.com
+ announcelist = Him <him@example.com>
+ announcelist = Jim <jim@example.com>
+ announcelist = pop@example.com
+
+ This might make it easier to maintain short recipients lists without
+ requiring full-fledged mailing list software.
+
+* By default, git-multimail sets email "Reply-To" headers to reply to
+ the pusher (for reference updates) and to the author (for commit
+ notifications). By default, the pusher's email address is
+ constructed by appending "multimailhook.emaildomain" to the pusher's
+ username.
+
+* The generated emails contain a configurable footer. By default, it
+ lists the name of the administrator who should be contacted to
+ unsubscribe from notification emails.
+
+* New option multimailhook.emailmaxlinelength to limit the length of
+ lines in the main part of the email body. The default limit is 500
+ characters.
+
+* New option multimailhook.emailstrictutf8 to ensure that the main
+ part of the email body is valid UTF-8. Invalid characters are
+ turned into the Unicode replacement character, U+FFFD. By default
+ this option is turned on.
+
+* Written in Python. Easier to add new features.
--- /dev/null
+#! /usr/bin/env python2
+
+# Copyright (c) 2012,2013 Michael Haggerty
+# Derived from contrib/hooks/post-receive-email, which is
+# Copyright (c) 2007 Andy Parkins
+# and also includes contributions by other authors.
+#
+# This file is part of git-multimail.
+#
+# git-multimail is free software: you can redistribute it and/or
+# modify it under the terms of the GNU General Public License version
+# 2 as published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program. If not, see
+# <http://www.gnu.org/licenses/>.
+
+"""Generate notification emails for pushes to a git repository.
+
+This hook sends emails describing changes introduced by pushes to a
+git repository. For each reference that was changed, it emits one
+ReferenceChange email summarizing how the reference was changed,
+followed by one Revision email for each new commit that was introduced
+by the reference change.
+
+Each commit is announced in exactly one Revision email. If the same
+commit is merged into another branch in the same or a later push, then
+the ReferenceChange email will list the commit's SHA1 and its one-line
+summary, but no new Revision email will be generated.
+
+This script is designed to be used as a "post-receive" hook in a git
+repository (see githooks(5)). It can also be used as an "update"
+script, but this usage is not completely reliable and is deprecated.
+
+To help with debugging, this script accepts a --stdout option, which
+causes the emails to be written to standard output rather than sent
+using sendmail.
+
+See the accompanying README file for the complete documentation.
+
+"""
+
+import sys
+import os
+import re
+import bisect
+import subprocess
+import shlex
+import optparse
+import smtplib
+
+try:
+ from email.utils import make_msgid
+ from email.utils import getaddresses
+ from email.utils import formataddr
+ from email.header import Header
+except ImportError:
+ # Prior to Python 2.5, the email module used different names:
+ from email.Utils import make_msgid
+ from email.Utils import getaddresses
+ from email.Utils import formataddr
+ from email.Header import Header
+
+
+DEBUG = False
+
+ZEROS = '0' * 40
+LOGBEGIN = '- Log -----------------------------------------------------------------\n'
+LOGEND = '-----------------------------------------------------------------------\n'
+
+
+# It is assumed in many places that the encoding is uniformly UTF-8,
+# so changing these constants is unsupported. But define them here
+# anyway, to make it easier to find (at least most of) the places
+# where the encoding is important.
+(ENCODING, CHARSET) = ('UTF-8', 'utf-8')
+
+
+REF_CREATED_SUBJECT_TEMPLATE = (
+ '%(emailprefix)s%(refname_type)s %(short_refname)s created'
+ ' (now %(newrev_short)s)'
+ )
+REF_UPDATED_SUBJECT_TEMPLATE = (
+ '%(emailprefix)s%(refname_type)s %(short_refname)s updated'
+ ' (%(oldrev_short)s -> %(newrev_short)s)'
+ )
+REF_DELETED_SUBJECT_TEMPLATE = (
+ '%(emailprefix)s%(refname_type)s %(short_refname)s deleted'
+ ' (was %(oldrev_short)s)'
+ )
+
+REFCHANGE_HEADER_TEMPLATE = """\
+To: %(recipients)s
+Subject: %(subject)s
+MIME-Version: 1.0
+Content-Type: text/plain; charset=%(charset)s
+Content-Transfer-Encoding: 8bit
+Message-ID: %(msgid)s
+From: %(fromaddr)s
+Reply-To: %(reply_to)s
+X-Git-Repo: %(repo_shortname)s
+X-Git-Refname: %(refname)s
+X-Git-Reftype: %(refname_type)s
+X-Git-Oldrev: %(oldrev)s
+X-Git-Newrev: %(newrev)s
+Auto-Submitted: auto-generated
+"""
+
+REFCHANGE_INTRO_TEMPLATE = """\
+This is an automated email from the git hooks/post-receive script.
+
+%(pusher)s pushed a change to %(refname_type)s %(short_refname)s
+in repository %(repo_shortname)s.
+
+"""
+
+
+FOOTER_TEMPLATE = """\
+
+-- \n\
+To stop receiving notification emails like this one, please contact
+%(administrator)s.
+"""
+
+
+REWIND_ONLY_TEMPLATE = """\
+This update removed existing revisions from the reference, leaving the
+reference pointing at a previous point in the repository history.
+
+ * -- * -- N %(refname)s (%(newrev_short)s)
+ \\
+ O -- O -- O (%(oldrev_short)s)
+
+Any revisions marked "omits" are not gone; other references still
+refer to them. Any revisions marked "discards" are gone forever.
+"""
+
+
+NON_FF_TEMPLATE = """\
+This update added new revisions after undoing existing revisions.
+That is to say, some revisions that were in the old version of the
+%(refname_type)s are not in the new version. This situation occurs
+when a user --force pushes a change and generates a repository
+containing something like this:
+
+ * -- * -- B -- O -- O -- O (%(oldrev_short)s)
+ \\
+ N -- N -- N %(refname)s (%(newrev_short)s)
+
+You should already have received notification emails for all of the O
+revisions, and so the following emails describe only the N revisions
+from the common base, B.
+
+Any revisions marked "omits" are not gone; other references still
+refer to them. Any revisions marked "discards" are gone forever.
+"""
+
+
+NO_NEW_REVISIONS_TEMPLATE = """\
+No new revisions were added by this update.
+"""
+
+
+DISCARDED_REVISIONS_TEMPLATE = """\
+This change permanently discards the following revisions:
+"""
+
+
+NO_DISCARDED_REVISIONS_TEMPLATE = """\
+The revisions that were on this %(refname_type)s are still contained in
+other references; therefore, this change does not discard any commits
+from the repository.
+"""
+
+
+NEW_REVISIONS_TEMPLATE = """\
+The %(tot)s revisions listed above as "new" are entirely new to this
+repository and will be described in separate emails. The revisions
+listed as "adds" were already present in the repository and have only
+been added to this reference.
+
+"""
+
+
+TAG_CREATED_TEMPLATE = """\
+ at %(newrev_short)-9s (%(newrev_type)s)
+"""
+
+
+TAG_UPDATED_TEMPLATE = """\
+*** WARNING: tag %(short_refname)s was modified! ***
+
+ from %(oldrev_short)-9s (%(oldrev_type)s)
+ to %(newrev_short)-9s (%(newrev_type)s)
+"""
+
+
+TAG_DELETED_TEMPLATE = """\
+*** WARNING: tag %(short_refname)s was deleted! ***
+
+"""
+
+
+# The template used in summary tables. It looks best if this uses the
+# same alignment as TAG_CREATED_TEMPLATE and TAG_UPDATED_TEMPLATE.
+BRIEF_SUMMARY_TEMPLATE = """\
+%(action)10s %(rev_short)-9s %(text)s
+"""
+
+
+NON_COMMIT_UPDATE_TEMPLATE = """\
+This is an unusual reference change because the reference did not
+refer to a commit either before or after the change. We do not know
+how to provide full information about this reference change.
+"""
+
+
+REVISION_HEADER_TEMPLATE = """\
+To: %(recipients)s
+Subject: %(emailprefix)s%(num)02d/%(tot)02d: %(oneline)s
+MIME-Version: 1.0
+Content-Type: text/plain; charset=%(charset)s
+Content-Transfer-Encoding: 8bit
+From: %(fromaddr)s
+Reply-To: %(reply_to)s
+In-Reply-To: %(reply_to_msgid)s
+References: %(reply_to_msgid)s
+X-Git-Repo: %(repo_shortname)s
+X-Git-Refname: %(refname)s
+X-Git-Reftype: %(refname_type)s
+X-Git-Rev: %(rev)s
+Auto-Submitted: auto-generated
+"""
+
+REVISION_INTRO_TEMPLATE = """\
+This is an automated email from the git hooks/post-receive script.
+
+%(pusher)s pushed a commit to %(refname_type)s %(short_refname)s
+in repository %(repo_shortname)s.
+
+"""
+
+
+REVISION_FOOTER_TEMPLATE = FOOTER_TEMPLATE
+
+
+class CommandError(Exception):
+ def __init__(self, cmd, retcode):
+ self.cmd = cmd
+ self.retcode = retcode
+ Exception.__init__(
+ self,
+ 'Command "%s" failed with retcode %s' % (' '.join(cmd), retcode,)
+ )
+
+
+class ConfigurationException(Exception):
+ pass
+
+
+def read_git_output(args, input=None, keepends=False, **kw):
+ """Read the output of a Git command."""
+
+ return read_output(
+ ['git', '-c', 'i18n.logoutputencoding=%s' % (ENCODING,)] + args,
+ input=input, keepends=keepends, **kw
+ )
+
+
+def read_output(cmd, input=None, keepends=False, **kw):
+ if input:
+ stdin = subprocess.PIPE
+ else:
+ stdin = None
+ p = subprocess.Popen(
+ cmd, stdin=stdin, stdout=subprocess.PIPE, stderr=subprocess.PIPE, **kw
+ )
+ (out, err) = p.communicate(input)
+ retcode = p.wait()
+ if retcode:
+ raise CommandError(cmd, retcode)
+ if not keepends:
+ out = out.rstrip('\n\r')
+ return out
+
+
+def read_git_lines(args, keepends=False, **kw):
+ """Return the lines output by Git command.
+
+ Return as single lines, with newlines stripped off."""
+
+ return read_git_output(args, keepends=True, **kw).splitlines(keepends)
+
+
+class Config(object):
+ def __init__(self, section, git_config=None):
+ """Represent a section of the git configuration.
+
+ If git_config is specified, it is passed to "git config" in
+ the GIT_CONFIG environment variable, meaning that "git config"
+ will read the specified path rather than the Git default
+ config paths."""
+
+ self.section = section
+ if git_config:
+ self.env = os.environ.copy()
+ self.env['GIT_CONFIG'] = git_config
+ else:
+ self.env = None
+
+ @staticmethod
+ def _split(s):
+ """Split NUL-terminated values."""
+
+ words = s.split('\0')
+ assert words[-1] == ''
+ return words[:-1]
+
+ def get(self, name, default=None):
+ try:
+ values = self._split(read_git_output(
+ ['config', '--get', '--null', '%s.%s' % (self.section, name)],
+ env=self.env, keepends=True,
+ ))
+ assert len(values) == 1
+ return values[0]
+ except CommandError:
+ return default
+
+ def get_bool(self, name, default=None):
+ try:
+ value = read_git_output(
+ ['config', '--get', '--bool', '%s.%s' % (self.section, name)],
+ env=self.env,
+ )
+ except CommandError:
+ return default
+ return value == 'true'
+
+ def get_all(self, name, default=None):
+ """Read a (possibly multivalued) setting from the configuration.
+
+ Return the result as a list of values, or default if the name
+ is unset."""
+
+ try:
+ return self._split(read_git_output(
+ ['config', '--get-all', '--null', '%s.%s' % (self.section, name)],
+ env=self.env, keepends=True,
+ ))
+ except CommandError, e:
+ if e.retcode == 1:
+ # "the section or key is invalid"; i.e., there is no
+ # value for the specified key.
+ return default
+ else:
+ raise
+
+ def get_recipients(self, name, default=None):
+ """Read a recipients list from the configuration.
+
+ Return the result as a comma-separated list of email
+ addresses, or default if the option is unset. If the setting
+ has multiple values, concatenate them with comma separators."""
+
+ lines = self.get_all(name, default=None)
+ if lines is None:
+ return default
+ return ', '.join(line.strip() for line in lines)
+
+ def set(self, name, value):
+ read_git_output(
+ ['config', '%s.%s' % (self.section, name), value],
+ env=self.env,
+ )
+
+ def add(self, name, value):
+ read_git_output(
+ ['config', '--add', '%s.%s' % (self.section, name), value],
+ env=self.env,
+ )
+
+ def has_key(self, name):
+ return self.get_all(name, default=None) is not None
+
+ def unset_all(self, name):
+ try:
+ read_git_output(
+ ['config', '--unset-all', '%s.%s' % (self.section, name)],
+ env=self.env,
+ )
+ except CommandError, e:
+ if e.retcode == 5:
+ # The name doesn't exist, which is what we wanted anyway...
+ pass
+ else:
+ raise
+
+ def set_recipients(self, name, value):
+ self.unset_all(name)
+ for pair in getaddresses([value]):
+ self.add(name, formataddr(pair))
+
+
+def generate_summaries(*log_args):
+ """Generate a brief summary for each revision requested.
+
+ log_args are strings that will be passed directly to "git log" as
+ revision selectors. Iterate over (sha1_short, subject) for each
+ commit specified by log_args (subject is the first line of the
+ commit message as a string without EOLs)."""
+
+ cmd = [
+ 'log', '--abbrev', '--format=%h %s',
+ ] + list(log_args) + ['--']
+ for line in read_git_lines(cmd):
+ yield tuple(line.split(' ', 1))
+
+
+def limit_lines(lines, max_lines):
+ for (index, line) in enumerate(lines):
+ if index < max_lines:
+ yield line
+
+ if index >= max_lines:
+ yield '... %d lines suppressed ...\n' % (index + 1 - max_lines,)
+
+
+def limit_linelength(lines, max_linelength):
+ for line in lines:
+ # Don't forget that lines always include a trailing newline.
+ if len(line) > max_linelength + 1:
+ line = line[:max_linelength - 7] + ' [...]\n'
+ yield line
+
+
+class CommitSet(object):
+ """A (constant) set of object names.
+
+ The set should be initialized with full SHA1 object names. The
+ __contains__() method returns True iff its argument is an
+ abbreviation of any the names in the set."""
+
+ def __init__(self, names):
+ self._names = sorted(names)
+
+ def __len__(self):
+ return len(self._names)
+
+ def __contains__(self, sha1_abbrev):
+ """Return True iff this set contains sha1_abbrev (which might be abbreviated)."""
+
+ i = bisect.bisect_left(self._names, sha1_abbrev)
+ return i < len(self) and self._names[i].startswith(sha1_abbrev)
+
+
+class GitObject(object):
+ def __init__(self, sha1, type=None):
+ if sha1 == ZEROS:
+ self.sha1 = self.type = self.commit_sha1 = None
+ else:
+ self.sha1 = sha1
+ self.type = type or read_git_output(['cat-file', '-t', self.sha1])
+
+ if self.type == 'commit':
+ self.commit_sha1 = self.sha1
+ elif self.type == 'tag':
+ try:
+ self.commit_sha1 = read_git_output(
+ ['rev-parse', '--verify', '%s^0' % (self.sha1,)]
+ )
+ except CommandError:
+ # Cannot deref tag to determine commit_sha1
+ self.commit_sha1 = None
+ else:
+ self.commit_sha1 = None
+
+ self.short = read_git_output(['rev-parse', '--short', sha1])
+
+ def get_summary(self):
+ """Return (sha1_short, subject) for this commit."""
+
+ if not self.sha1:
+ raise ValueError('Empty commit has no summary')
+
+ return iter(generate_summaries('--no-walk', self.sha1)).next()
+
+ def __eq__(self, other):
+ return isinstance(other, GitObject) and self.sha1 == other.sha1
+
+ def __hash__(self):
+ return hash(self.sha1)
+
+ def __nonzero__(self):
+ return bool(self.sha1)
+
+ def __str__(self):
+ return self.sha1 or ZEROS
+
+
+class Change(object):
+ """A Change that has been made to the Git repository.
+
+ Abstract class from which both Revisions and ReferenceChanges are
+ derived. A Change knows how to generate a notification email
+ describing itself."""
+
+ def __init__(self, environment):
+ self.environment = environment
+ self._values = None
+
+ def _compute_values(self):
+ """Return a dictionary {keyword : expansion} for this Change.
+
+ Derived classes overload this method to add more entries to
+ the return value. This method is used internally by
+ get_values(). The return value should always be a new
+ dictionary."""
+
+ return self.environment.get_values()
+
+ def get_values(self, **extra_values):
+ """Return a dictionary {keyword : expansion} for this Change.
+
+ Return a dictionary mapping keywords to the values that they
+ should be expanded to for this Change (used when interpolating
+ template strings). If any keyword arguments are supplied, add
+ those to the return value as well. The return value is always
+ a new dictionary."""
+
+ if self._values is None:
+ self._values = self._compute_values()
+
+ values = self._values.copy()
+ if extra_values:
+ values.update(extra_values)
+ return values
+
+ def expand(self, template, **extra_values):
+ """Expand template.
+
+ Expand the template (which should be a string) using string
+ interpolation of the values for this Change. If any keyword
+ arguments are provided, also include those in the keywords
+ available for interpolation."""
+
+ return template % self.get_values(**extra_values)
+
+ def expand_lines(self, template, **extra_values):
+ """Break template into lines and expand each line."""
+
+ values = self.get_values(**extra_values)
+ for line in template.splitlines(True):
+ yield line % values
+
+ def expand_header_lines(self, template, **extra_values):
+ """Break template into lines and expand each line as an RFC 2822 header.
+
+ Encode values and split up lines that are too long. Silently
+ skip lines that contain references to unknown variables."""
+
+ values = self.get_values(**extra_values)
+ for line in template.splitlines():
+ (name, value) = line.split(':', 1)
+
+ try:
+ value = value % values
+ except KeyError, e:
+ if DEBUG:
+ sys.stderr.write(
+ 'Warning: unknown variable %r in the following line; line skipped:\n'
+ ' %s\n'
+ % (e.args[0], line,)
+ )
+ else:
+ try:
+ h = Header(value, header_name=name)
+ except UnicodeDecodeError:
+ h = Header(value, header_name=name, charset=CHARSET, errors='replace')
+ for splitline in ('%s: %s\n' % (name, h.encode(),)).splitlines(True):
+ yield splitline
+
+ def generate_email_header(self):
+ """Generate the RFC 2822 email headers for this Change, a line at a time.
+
+ The output should not include the trailing blank line."""
+
+ raise NotImplementedError()
+
+ def generate_email_intro(self):
+ """Generate the email intro for this Change, a line at a time.
+
+ The output will be used as the standard boilerplate at the top
+ of the email body."""
+
+ raise NotImplementedError()
+
+ def generate_email_body(self):
+ """Generate the main part of the email body, a line at a time.
+
+ The text in the body might be truncated after a specified
+ number of lines (see multimailhook.emailmaxlines)."""
+
+ raise NotImplementedError()
+
+ def generate_email_footer(self):
+ """Generate the footer of the email, a line at a time.
+
+ The footer is always included, irrespective of
+ multimailhook.emailmaxlines."""
+
+ raise NotImplementedError()
+
+ def generate_email(self, push, body_filter=None):
+ """Generate an email describing this change.
+
+ Iterate over the lines (including the header lines) of an
+ email describing this change. If body_filter is not None,
+ then use it to filter the lines that are intended for the
+ email body."""
+
+ for line in self.generate_email_header():
+ yield line
+ yield '\n'
+ for line in self.generate_email_intro():
+ yield line
+
+ body = self.generate_email_body(push)
+ if body_filter is not None:
+ body = body_filter(body)
+ for line in body:
+ yield line
+
+ for line in self.generate_email_footer():
+ yield line
+
+
+class Revision(Change):
+ """A Change consisting of a single git commit."""
+
+ def __init__(self, reference_change, rev, num, tot):
+ Change.__init__(self, reference_change.environment)
+ self.reference_change = reference_change
+ self.rev = rev
+ self.change_type = self.reference_change.change_type
+ self.refname = self.reference_change.refname
+ self.num = num
+ self.tot = tot
+ self.author = read_git_output(['log', '--no-walk', '--format=%aN <%aE>', self.rev.sha1])
+ self.recipients = self.environment.get_revision_recipients(self)
+
+ def _compute_values(self):
+ values = Change._compute_values(self)
+
+ oneline = read_git_output(
+ ['log', '--format=%s', '--no-walk', self.rev.sha1]
+ )
+
+ values['rev'] = self.rev.sha1
+ values['rev_short'] = self.rev.short
+ values['change_type'] = self.change_type
+ values['refname'] = self.refname
+ values['short_refname'] = self.reference_change.short_refname
+ values['refname_type'] = self.reference_change.refname_type
+ values['reply_to_msgid'] = self.reference_change.msgid
+ values['num'] = self.num
+ values['tot'] = self.tot
+ values['recipients'] = self.recipients
+ values['oneline'] = oneline
+ values['author'] = self.author
+
+ reply_to = self.environment.get_reply_to_commit(self)
+ if reply_to:
+ values['reply_to'] = reply_to
+
+ return values
+
+ def generate_email_header(self):
+ for line in self.expand_header_lines(REVISION_HEADER_TEMPLATE):
+ yield line
+
+ def generate_email_intro(self):
+ for line in self.expand_lines(REVISION_INTRO_TEMPLATE):
+ yield line
+
+ def generate_email_body(self, push):
+ """Show this revision."""
+
+ return read_git_lines(
+ [
+ 'log', '-C',
+ '--stat', '-p', '--cc',
+ '-1', self.rev.sha1,
+ ],
+ keepends=True,
+ )
+
+ def generate_email_footer(self):
+ return self.expand_lines(REVISION_FOOTER_TEMPLATE)
+
+
+class ReferenceChange(Change):
+ """A Change to a Git reference.
+
+ An abstract class representing a create, update, or delete of a
+ Git reference. Derived classes handle specific types of reference
+ (e.g., tags vs. branches). These classes generate the main
+ reference change email summarizing the reference change and
+ whether it caused any any commits to be added or removed.
+
+ ReferenceChange objects are usually created using the static
+ create() method, which has the logic to decide which derived class
+ to instantiate."""
+
+ REF_RE = re.compile(r'^refs\/(?P<area>[^\/]+)\/(?P<shortname>.*)$')
+
+ @staticmethod
+ def create(environment, oldrev, newrev, refname):
+ """Return a ReferenceChange object representing the change.
+
+ Return an object that represents the type of change that is being
+ made. oldrev and newrev should be SHA1s or ZEROS."""
+
+ old = GitObject(oldrev)
+ new = GitObject(newrev)
+ rev = new or old
+
+ # The revision type tells us what type the commit is, combined with
+ # the location of the ref we can decide between
+ # - working branch
+ # - tracking branch
+ # - unannotated tag
+ # - annotated tag
+ m = ReferenceChange.REF_RE.match(refname)
+ if m:
+ area = m.group('area')
+ short_refname = m.group('shortname')
+ else:
+ area = ''
+ short_refname = refname
+
+ if rev.type == 'tag':
+ # Annotated tag:
+ klass = AnnotatedTagChange
+ elif rev.type == 'commit':
+ if area == 'tags':
+ # Non-annotated tag:
+ klass = NonAnnotatedTagChange
+ elif area == 'heads':
+ # Branch:
+ klass = BranchChange
+ elif area == 'remotes':
+ # Tracking branch:
+ sys.stderr.write(
+ '*** Push-update of tracking branch %r\n'
+ '*** - incomplete email generated.\n'
+ % (refname,)
+ )
+ klass = OtherReferenceChange
+ else:
+ # Some other reference namespace:
+ sys.stderr.write(
+ '*** Push-update of strange reference %r\n'
+ '*** - incomplete email generated.\n'
+ % (refname,)
+ )
+ klass = OtherReferenceChange
+ else:
+ # Anything else (is there anything else?)
+ sys.stderr.write(
+ '*** Unknown type of update to %r (%s)\n'
+ '*** - incomplete email generated.\n'
+ % (refname, rev.type,)
+ )
+ klass = OtherReferenceChange
+
+ return klass(
+ environment,
+ refname=refname, short_refname=short_refname,
+ old=old, new=new, rev=rev,
+ )
+
+ def __init__(self, environment, refname, short_refname, old, new, rev):
+ Change.__init__(self, environment)
+ self.change_type = {
+ (False, True) : 'create',
+ (True, True) : 'update',
+ (True, False) : 'delete',
+ }[bool(old), bool(new)]
+ self.refname = refname
+ self.short_refname = short_refname
+ self.old = old
+ self.new = new
+ self.rev = rev
+ self.msgid = make_msgid()
+ self.diffopts = environment.diffopts
+ self.logopts = environment.logopts
+ self.showlog = environment.refchange_showlog
+
+ def _compute_values(self):
+ values = Change._compute_values(self)
+
+ values['change_type'] = self.change_type
+ values['refname_type'] = self.refname_type
+ values['refname'] = self.refname
+ values['short_refname'] = self.short_refname
+ values['msgid'] = self.msgid
+ values['recipients'] = self.recipients
+ values['oldrev'] = str(self.old)
+ values['oldrev_short'] = self.old.short
+ values['newrev'] = str(self.new)
+ values['newrev_short'] = self.new.short
+
+ if self.old:
+ values['oldrev_type'] = self.old.type
+ if self.new:
+ values['newrev_type'] = self.new.type
+
+ reply_to = self.environment.get_reply_to_refchange(self)
+ if reply_to:
+ values['reply_to'] = reply_to
+
+ return values
+
+ def get_subject(self):
+ template = {
+ 'create' : REF_CREATED_SUBJECT_TEMPLATE,
+ 'update' : REF_UPDATED_SUBJECT_TEMPLATE,
+ 'delete' : REF_DELETED_SUBJECT_TEMPLATE,
+ }[self.change_type]
+ return self.expand(template)
+
+ def generate_email_header(self):
+ for line in self.expand_header_lines(
+ REFCHANGE_HEADER_TEMPLATE, subject=self.get_subject(),
+ ):
+ yield line
+
+ def generate_email_intro(self):
+ for line in self.expand_lines(REFCHANGE_INTRO_TEMPLATE):
+ yield line
+
+ def generate_email_body(self, push):
+ """Call the appropriate body-generation routine.
+
+ Call one of generate_create_summary() /
+ generate_update_summary() / generate_delete_summary()."""
+
+ change_summary = {
+ 'create' : self.generate_create_summary,
+ 'delete' : self.generate_delete_summary,
+ 'update' : self.generate_update_summary,
+ }[self.change_type](push)
+ for line in change_summary:
+ yield line
+
+ for line in self.generate_revision_change_summary(push):
+ yield line
+
+ def generate_email_footer(self):
+ return self.expand_lines(FOOTER_TEMPLATE)
+
+ def generate_revision_change_log(self, new_commits_list):
+ if self.showlog:
+ yield '\n'
+ yield 'Detailed log of new commits:\n\n'
+ for line in read_git_lines(
+ ['log', '--no-walk']
+ + self.logopts
+ + new_commits_list
+ + ['--'],
+ keepends=True,
+ ):
+ yield line
+
+ def generate_revision_change_summary(self, push):
+ """Generate a summary of the revisions added/removed by this change."""
+
+ if self.new.commit_sha1 and not self.old.commit_sha1:
+ # A new reference was created. List the new revisions
+ # brought by the new reference (i.e., those revisions that
+ # were not in the repository before this reference
+ # change).
+ sha1s = list(push.get_new_commits(self))
+ sha1s.reverse()
+ tot = len(sha1s)
+ new_revisions = [
+ Revision(self, GitObject(sha1), num=i+1, tot=tot)
+ for (i, sha1) in enumerate(sha1s)
+ ]
+
+ if new_revisions:
+ yield self.expand('This %(refname_type)s includes the following new commits:\n')
+ yield '\n'
+ for r in new_revisions:
+ (sha1, subject) = r.rev.get_summary()
+ yield r.expand(
+ BRIEF_SUMMARY_TEMPLATE, action='new', text=subject,
+ )
+ yield '\n'
+ for line in self.expand_lines(NEW_REVISIONS_TEMPLATE, tot=tot):
+ yield line
+ for line in self.generate_revision_change_log([r.rev.sha1 for r in new_revisions]):
+ yield line
+ else:
+ for line in self.expand_lines(NO_NEW_REVISIONS_TEMPLATE):
+ yield line
+
+ elif self.new.commit_sha1 and self.old.commit_sha1:
+ # A reference was changed to point at a different commit.
+ # List the revisions that were removed and/or added *from
+ # that reference* by this reference change, along with a
+ # diff between the trees for its old and new values.
+
+ # List of the revisions that were added to the branch by
+ # this update. Note this list can include revisions that
+ # have already had notification emails; we want such
+ # revisions in the summary even though we will not send
+ # new notification emails for them.
+ adds = list(generate_summaries(
+ '--topo-order', '--reverse', '%s..%s'
+ % (self.old.commit_sha1, self.new.commit_sha1,)
+ ))
+
+ # List of the revisions that were removed from the branch
+ # by this update. This will be empty except for
+ # non-fast-forward updates.
+ discards = list(generate_summaries(
+ '%s..%s' % (self.new.commit_sha1, self.old.commit_sha1,)
+ ))
+
+ if adds:
+ new_commits_list = push.get_new_commits(self)
+ else:
+ new_commits_list = []
+ new_commits = CommitSet(new_commits_list)
+
+ if discards:
+ discarded_commits = CommitSet(push.get_discarded_commits(self))
+ else:
+ discarded_commits = CommitSet([])
+
+ if discards and adds:
+ for (sha1, subject) in discards:
+ if sha1 in discarded_commits:
+ action = 'discards'
+ else:
+ action = 'omits'
+ yield self.expand(
+ BRIEF_SUMMARY_TEMPLATE, action=action,
+ rev_short=sha1, text=subject,
+ )
+ for (sha1, subject) in adds:
+ if sha1 in new_commits:
+ action = 'new'
+ else:
+ action = 'adds'
+ yield self.expand(
+ BRIEF_SUMMARY_TEMPLATE, action=action,
+ rev_short=sha1, text=subject,
+ )
+ yield '\n'
+ for line in self.expand_lines(NON_FF_TEMPLATE):
+ yield line
+
+ elif discards:
+ for (sha1, subject) in discards:
+ if sha1 in discarded_commits:
+ action = 'discards'
+ else:
+ action = 'omits'
+ yield self.expand(
+ BRIEF_SUMMARY_TEMPLATE, action=action,
+ rev_short=sha1, text=subject,
+ )
+ yield '\n'
+ for line in self.expand_lines(REWIND_ONLY_TEMPLATE):
+ yield line
+
+ elif adds:
+ (sha1, subject) = self.old.get_summary()
+ yield self.expand(
+ BRIEF_SUMMARY_TEMPLATE, action='from',
+ rev_short=sha1, text=subject,
+ )
+ for (sha1, subject) in adds:
+ if sha1 in new_commits:
+ action = 'new'
+ else:
+ action = 'adds'
+ yield self.expand(
+ BRIEF_SUMMARY_TEMPLATE, action=action,
+ rev_short=sha1, text=subject,
+ )
+
+ yield '\n'
+
+ if new_commits:
+ for line in self.expand_lines(NEW_REVISIONS_TEMPLATE, tot=len(new_commits)):
+ yield line
+ for line in self.generate_revision_change_log(new_commits_list):
+ yield line
+ else:
+ for line in self.expand_lines(NO_NEW_REVISIONS_TEMPLATE):
+ yield line
+
+ # The diffstat is shown from the old revision to the new
+ # revision. This is to show the truth of what happened in
+ # this change. There's no point showing the stat from the
+ # base to the new revision because the base is effectively a
+ # random revision at this point - the user will be interested
+ # in what this revision changed - including the undoing of
+ # previous revisions in the case of non-fast-forward updates.
+ yield '\n'
+ yield 'Summary of changes:\n'
+ for line in read_git_lines(
+ ['diff-tree']
+ + self.diffopts
+ + ['%s..%s' % (self.old.commit_sha1, self.new.commit_sha1,)],
+ keepends=True,
+ ):
+ yield line
+
+ elif self.old.commit_sha1 and not self.new.commit_sha1:
+ # A reference was deleted. List the revisions that were
+ # removed from the repository by this reference change.
+
+ sha1s = list(push.get_discarded_commits(self))
+ tot = len(sha1s)
+ discarded_revisions = [
+ Revision(self, GitObject(sha1), num=i+1, tot=tot)
+ for (i, sha1) in enumerate(sha1s)
+ ]
+
+ if discarded_revisions:
+ for line in self.expand_lines(DISCARDED_REVISIONS_TEMPLATE):
+ yield line
+ yield '\n'
+ for r in discarded_revisions:
+ (sha1, subject) = r.rev.get_summary()
+ yield r.expand(
+ BRIEF_SUMMARY_TEMPLATE, action='discards', text=subject,
+ )
+ else:
+ for line in self.expand_lines(NO_DISCARDED_REVISIONS_TEMPLATE):
+ yield line
+
+ elif not self.old.commit_sha1 and not self.new.commit_sha1:
+ for line in self.expand_lines(NON_COMMIT_UPDATE_TEMPLATE):
+ yield line
+
+ def generate_create_summary(self, push):
+ """Called for the creation of a reference."""
+
+ # This is a new reference and so oldrev is not valid
+ (sha1, subject) = self.new.get_summary()
+ yield self.expand(
+ BRIEF_SUMMARY_TEMPLATE, action='at',
+ rev_short=sha1, text=subject,
+ )
+ yield '\n'
+
+ def generate_update_summary(self, push):
+ """Called for the change of a pre-existing branch."""
+
+ return iter([])
+
+ def generate_delete_summary(self, push):
+ """Called for the deletion of any type of reference."""
+
+ (sha1, subject) = self.old.get_summary()
+ yield self.expand(
+ BRIEF_SUMMARY_TEMPLATE, action='was',
+ rev_short=sha1, text=subject,
+ )
+ yield '\n'
+
+
+class BranchChange(ReferenceChange):
+ refname_type = 'branch'
+
+ def __init__(self, environment, refname, short_refname, old, new, rev):
+ ReferenceChange.__init__(
+ self, environment,
+ refname=refname, short_refname=short_refname,
+ old=old, new=new, rev=rev,
+ )
+ self.recipients = environment.get_refchange_recipients(self)
+
+
+class AnnotatedTagChange(ReferenceChange):
+ refname_type = 'annotated tag'
+
+ def __init__(self, environment, refname, short_refname, old, new, rev):
+ ReferenceChange.__init__(
+ self, environment,
+ refname=refname, short_refname=short_refname,
+ old=old, new=new, rev=rev,
+ )
+ self.recipients = environment.get_announce_recipients(self)
+ self.show_shortlog = environment.announce_show_shortlog
+
+ ANNOTATED_TAG_FORMAT = (
+ '%(*objectname)\n'
+ '%(*objecttype)\n'
+ '%(taggername)\n'
+ '%(taggerdate)'
+ )
+
+ def describe_tag(self, push):
+ """Describe the new value of an annotated tag."""
+
+ # Use git for-each-ref to pull out the individual fields from
+ # the tag
+ [tagobject, tagtype, tagger, tagged] = read_git_lines(
+ ['for-each-ref', '--format=%s' % (self.ANNOTATED_TAG_FORMAT,), self.refname],
+ )
+
+ yield self.expand(
+ BRIEF_SUMMARY_TEMPLATE, action='tagging',
+ rev_short=tagobject, text='(%s)' % (tagtype,),
+ )
+ if tagtype == 'commit':
+ # If the tagged object is a commit, then we assume this is a
+ # release, and so we calculate which tag this tag is
+ # replacing
+ try:
+ prevtag = read_git_output(['describe', '--abbrev=0', '%s^' % (self.new,)])
+ except CommandError:
+ prevtag = None
+ if prevtag:
+ yield ' replaces %s\n' % (prevtag,)
+ else:
+ prevtag = None
+ yield ' length %s bytes\n' % (read_git_output(['cat-file', '-s', tagobject]),)
+
+ yield ' tagged by %s\n' % (tagger,)
+ yield ' on %s\n' % (tagged,)
+ yield '\n'
+
+ # Show the content of the tag message; this might contain a
+ # change log or release notes so is worth displaying.
+ yield LOGBEGIN
+ contents = list(read_git_lines(['cat-file', 'tag', self.new.sha1], keepends=True))
+ contents = contents[contents.index('\n') + 1:]
+ if contents and contents[-1][-1:] != '\n':
+ contents.append('\n')
+ for line in contents:
+ yield line
+
+ if self.show_shortlog and tagtype == 'commit':
+ # Only commit tags make sense to have rev-list operations
+ # performed on them
+ yield '\n'
+ if prevtag:
+ # Show changes since the previous release
+ revlist = read_git_output(
+ ['rev-list', '--pretty=short', '%s..%s' % (prevtag, self.new,)],
+ keepends=True,
+ )
+ else:
+ # No previous tag, show all the changes since time
+ # began
+ revlist = read_git_output(
+ ['rev-list', '--pretty=short', '%s' % (self.new,)],
+ keepends=True,
+ )
+ for line in read_git_lines(['shortlog'], input=revlist, keepends=True):
+ yield line
+
+ yield LOGEND
+ yield '\n'
+
+ def generate_create_summary(self, push):
+ """Called for the creation of an annotated tag."""
+
+ for line in self.expand_lines(TAG_CREATED_TEMPLATE):
+ yield line
+
+ for line in self.describe_tag(push):
+ yield line
+
+ def generate_update_summary(self, push):
+ """Called for the update of an annotated tag.
+
+ This is probably a rare event and may not even be allowed."""
+
+ for line in self.expand_lines(TAG_UPDATED_TEMPLATE):
+ yield line
+
+ for line in self.describe_tag(push):
+ yield line
+
+ def generate_delete_summary(self, push):
+ """Called when a non-annotated reference is updated."""
+
+ for line in self.expand_lines(TAG_DELETED_TEMPLATE):
+ yield line
+
+ yield self.expand(' tag was %(oldrev_short)s\n')
+ yield '\n'
+
+
+class NonAnnotatedTagChange(ReferenceChange):
+ refname_type = 'tag'
+
+ def __init__(self, environment, refname, short_refname, old, new, rev):
+ ReferenceChange.__init__(
+ self, environment,
+ refname=refname, short_refname=short_refname,
+ old=old, new=new, rev=rev,
+ )
+ self.recipients = environment.get_refchange_recipients(self)
+
+ def generate_create_summary(self, push):
+ """Called for the creation of an annotated tag."""
+
+ for line in self.expand_lines(TAG_CREATED_TEMPLATE):
+ yield line
+
+ def generate_update_summary(self, push):
+ """Called when a non-annotated reference is updated."""
+
+ for line in self.expand_lines(TAG_UPDATED_TEMPLATE):
+ yield line
+
+ def generate_delete_summary(self, push):
+ """Called when a non-annotated reference is updated."""
+
+ for line in self.expand_lines(TAG_DELETED_TEMPLATE):
+ yield line
+
+ for line in ReferenceChange.generate_delete_summary(self, push):
+ yield line
+
+
+class OtherReferenceChange(ReferenceChange):
+ refname_type = 'reference'
+
+ def __init__(self, environment, refname, short_refname, old, new, rev):
+ # We use the full refname as short_refname, because otherwise
+ # the full name of the reference would not be obvious from the
+ # text of the email.
+ ReferenceChange.__init__(
+ self, environment,
+ refname=refname, short_refname=refname,
+ old=old, new=new, rev=rev,
+ )
+ self.recipients = environment.get_refchange_recipients(self)
+
+
+class Mailer(object):
+ """An object that can send emails."""
+
+ def send(self, lines, to_addrs):
+ """Send an email consisting of lines.
+
+ lines must be an iterable over the lines constituting the
+ header and body of the email. to_addrs is a list of recipient
+ addresses (can be needed even if lines already contains a
+ "To:" field). It can be either a string (comma-separated list
+ of email addresses) or a Python list of individual email
+ addresses.
+
+ """
+
+ raise NotImplementedError()
+
+
+class SendMailer(Mailer):
+ """Send emails using 'sendmail -t'."""
+
+ SENDMAIL_CANDIDATES = [
+ '/usr/sbin/sendmail',
+ '/usr/lib/sendmail',
+ ]
+
+ @staticmethod
+ def find_sendmail():
+ for path in SendMailer.SENDMAIL_CANDIDATES:
+ if os.access(path, os.X_OK):
+ return path
+ else:
+ raise ConfigurationException(
+ 'No sendmail executable found. '
+ 'Try setting multimailhook.sendmailCommand.'
+ )
+
+ def __init__(self, command=None, envelopesender=None):
+ """Construct a SendMailer instance.
+
+ command should be the command and arguments used to invoke
+ sendmail, as a list of strings. If an envelopesender is
+ provided, it will also be passed to the command, via '-f
+ envelopesender'."""
+
+ if command:
+ self.command = command[:]
+ else:
+ self.command = [self.find_sendmail(), '-t']
+
+ if envelopesender:
+ self.command.extend(['-f', envelopesender])
+
+ def send(self, lines, to_addrs):
+ try:
+ p = subprocess.Popen(self.command, stdin=subprocess.PIPE)
+ except OSError, e:
+ sys.stderr.write(
+ '*** Cannot execute command: %s\n' % ' '.join(self.command)
+ + '*** %s\n' % str(e)
+ + '*** Try setting multimailhook.mailer to "smtp"\n'
+ '*** to send emails without using the sendmail command.\n'
+ )
+ sys.exit(1)
+ try:
+ p.stdin.writelines(lines)
+ except:
+ sys.stderr.write(
+ '*** Error while generating commit email\n'
+ '*** - mail sending aborted.\n'
+ )
+ p.terminate()
+ raise
+ else:
+ p.stdin.close()
+ retcode = p.wait()
+ if retcode:
+ raise CommandError(self.command, retcode)
+
+
+class SMTPMailer(Mailer):
+ """Send emails using Python's smtplib."""
+
+ def __init__(self, envelopesender, smtpserver):
+ if not envelopesender:
+ sys.stderr.write(
+ 'fatal: git_multimail: cannot use SMTPMailer without a sender address.\n'
+ 'please set either multimailhook.envelopeSender or user.email\n'
+ )
+ sys.exit(1)
+ self.envelopesender = envelopesender
+ self.smtpserver = smtpserver
+ try:
+ self.smtp = smtplib.SMTP(self.smtpserver)
+ except Exception, e:
+ sys.stderr.write('*** Error establishing SMTP connection to %s***\n' % self.smtpserver)
+ sys.stderr.write('*** %s\n' % str(e))
+ sys.exit(1)
+
+ def __del__(self):
+ self.smtp.quit()
+
+ def send(self, lines, to_addrs):
+ try:
+ msg = ''.join(lines)
+ # turn comma-separated list into Python list if needed.
+ if isinstance(to_addrs, basestring):
+ to_addrs = [email for (name, email) in getaddresses([to_addrs])]
+ self.smtp.sendmail(self.envelopesender, to_addrs, msg)
+ except Exception, e:
+ sys.stderr.write('*** Error sending email***\n')
+ sys.stderr.write('*** %s\n' % str(e))
+ self.smtp.quit()
+ sys.exit(1)
+
+
+class OutputMailer(Mailer):
+ """Write emails to an output stream, bracketed by lines of '=' characters.
+
+ This is intended for debugging purposes."""
+
+ SEPARATOR = '=' * 75 + '\n'
+
+ def __init__(self, f):
+ self.f = f
+
+ def send(self, lines, to_addrs):
+ self.f.write(self.SEPARATOR)
+ self.f.writelines(lines)
+ self.f.write(self.SEPARATOR)
+
+
+def get_git_dir():
+ """Determine GIT_DIR.
+
+ Determine GIT_DIR either from the GIT_DIR environment variable or
+ from the working directory, using Git's usual rules."""
+
+ try:
+ return read_git_output(['rev-parse', '--git-dir'])
+ except CommandError:
+ sys.stderr.write('fatal: git_multimail: not in a git directory\n')
+ sys.exit(1)
+
+
+class Environment(object):
+ """Describes the environment in which the push is occurring.
+
+ An Environment object encapsulates information about the local
+ environment. For example, it knows how to determine:
+
+ * the name of the repository to which the push occurred
+
+ * what user did the push
+
+ * what users want to be informed about various types of changes.
+
+ An Environment object is expected to have the following methods:
+
+ get_repo_shortname()
+
+ Return a short name for the repository, for display
+ purposes.
+
+ get_repo_path()
+
+ Return the absolute path to the Git repository.
+
+ get_emailprefix()
+
+ Return a string that will be prefixed to every email's
+ subject.
+
+ get_pusher()
+
+ Return the username of the person who pushed the changes.
+ This value is used in the email body to indicate who
+ pushed the change.
+
+ get_pusher_email() (may return None)
+
+ Return the email address of the person who pushed the
+ changes. The value should be a single RFC 2822 email
+ address as a string; e.g., "Joe User <user@example.com>"
+ if available, otherwise "user@example.com". If set, the
+ value is used as the Reply-To address for refchange
+ emails. If it is impossible to determine the pusher's
+ email, this attribute should be set to None (in which case
+ no Reply-To header will be output).
+
+ get_sender()
+
+ Return the address to be used as the 'From' email address
+ in the email envelope.
+
+ get_fromaddr()
+
+ Return the 'From' email address used in the email 'From:'
+ headers. (May be a full RFC 2822 email address like 'Joe
+ User <user@example.com>'.)
+
+ get_administrator()
+
+ Return the name and/or email of the repository
+ administrator. This value is used in the footer as the
+ person to whom requests to be removed from the
+ notification list should be sent. Ideally, it should
+ include a valid email address.
+
+ get_reply_to_refchange()
+ get_reply_to_commit()
+
+ Return the address to use in the email "Reply-To" header,
+ as a string. These can be an RFC 2822 email address, or
+ None to omit the "Reply-To" header.
+ get_reply_to_refchange() is used for refchange emails;
+ get_reply_to_commit() is used for individual commit
+ emails.
+
+ They should also define the following attributes:
+
+ announce_show_shortlog (bool)
+
+ True iff announce emails should include a shortlog.
+
+ refchange_showlog (bool)
+
+ True iff refchanges emails should include a detailed log.
+
+ diffopts (list of strings)
+
+ The options that should be passed to 'git diff' for the
+ summary email. The value should be a list of strings
+ representing words to be passed to the command.
+
+ logopts (list of strings)
+
+ Analogous to diffopts, but contains options passed to
+ 'git log' when generating the detailed log for a set of
+ commits (see refchange_showlog)
+
+ """
+
+ REPO_NAME_RE = re.compile(r'^(?P<name>.+?)(?:\.git)$')
+
+ def __init__(self, osenv=None):
+ self.osenv = osenv or os.environ
+ self.announce_show_shortlog = False
+ self.maxcommitemails = 500
+ self.diffopts = ['--stat', '--summary', '--find-copies-harder']
+ self.logopts = []
+ self.refchange_showlog = False
+
+ self.COMPUTED_KEYS = [
+ 'administrator',
+ 'charset',
+ 'emailprefix',
+ 'fromaddr',
+ 'pusher',
+ 'pusher_email',
+ 'repo_path',
+ 'repo_shortname',
+ 'sender',
+ ]
+
+ self._values = None
+
+ def get_repo_shortname(self):
+ """Use the last part of the repo path, with ".git" stripped off if present."""
+
+ basename = os.path.basename(os.path.abspath(self.get_repo_path()))
+ m = self.REPO_NAME_RE.match(basename)
+ if m:
+ return m.group('name')
+ else:
+ return basename
+
+ def get_pusher(self):
+ raise NotImplementedError()
+
+ def get_pusher_email(self):
+ return None
+
+ def get_administrator(self):
+ return 'the administrator of this repository'
+
+ def get_emailprefix(self):
+ return ''
+
+ def get_repo_path(self):
+ if read_git_output(['rev-parse', '--is-bare-repository']) == 'true':
+ path = get_git_dir()
+ else:
+ path = read_git_output(['rev-parse', '--show-toplevel'])
+ return os.path.abspath(path)
+
+ def get_charset(self):
+ return CHARSET
+
+ def get_values(self):
+ """Return a dictionary {keyword : expansion} for this Environment.
+
+ This method is called by Change._compute_values(). The keys
+ in the returned dictionary are available to be used in any of
+ the templates. The dictionary is created by calling
+ self.get_NAME() for each of the attributes named in
+ COMPUTED_KEYS and recording those that do not return None.
+ The return value is always a new dictionary."""
+
+ if self._values is None:
+ values = {}
+
+ for key in self.COMPUTED_KEYS:
+ value = getattr(self, 'get_%s' % (key,))()
+ if value is not None:
+ values[key] = value
+
+ self._values = values
+
+ return self._values.copy()
+
+ def get_refchange_recipients(self, refchange):
+ """Return the recipients for notifications about refchange.
+
+ Return the list of email addresses to which notifications
+ about the specified ReferenceChange should be sent."""
+
+ raise NotImplementedError()
+
+ def get_announce_recipients(self, annotated_tag_change):
+ """Return the recipients for notifications about annotated_tag_change.
+
+ Return the list of email addresses to which notifications
+ about the specified AnnotatedTagChange should be sent."""
+
+ raise NotImplementedError()
+
+ def get_reply_to_refchange(self, refchange):
+ return self.get_pusher_email()
+
+ def get_revision_recipients(self, revision):
+ """Return the recipients for messages about revision.
+
+ Return the list of email addresses to which notifications
+ about the specified Revision should be sent. This method
+ could be overridden, for example, to take into account the
+ contents of the revision when deciding whom to notify about
+ it. For example, there could be a scheme for users to express
+ interest in particular files or subdirectories, and only
+ receive notification emails for revisions that affecting those
+ files."""
+
+ raise NotImplementedError()
+
+ def get_reply_to_commit(self, revision):
+ return revision.author
+
+ def filter_body(self, lines):
+ """Filter the lines intended for an email body.
+
+ lines is an iterable over the lines that would go into the
+ email body. Filter it (e.g., limit the number of lines, the
+ line length, character set, etc.), returning another iterable.
+ See FilterLinesEnvironmentMixin and MaxlinesEnvironmentMixin
+ for classes implementing this functionality."""
+
+ return lines
+
+
+class ConfigEnvironmentMixin(Environment):
+ """A mixin that sets self.config to its constructor's config argument.
+
+ This class's constructor consumes the "config" argument.
+
+ Mixins that need to inspect the config should inherit from this
+ class (1) to make sure that "config" is still in the constructor
+ arguments with its own constructor runs and/or (2) to be sure that
+ self.config is set after construction."""
+
+ def __init__(self, config, **kw):
+ super(ConfigEnvironmentMixin, self).__init__(**kw)
+ self.config = config
+
+
+class ConfigOptionsEnvironmentMixin(ConfigEnvironmentMixin):
+ """An Environment that reads most of its information from "git config"."""
+
+ def __init__(self, config, **kw):
+ super(ConfigOptionsEnvironmentMixin, self).__init__(
+ config=config, **kw
+ )
+
+ self.announce_show_shortlog = config.get_bool(
+ 'announceshortlog', default=self.announce_show_shortlog
+ )
+
+ self.refchange_showlog = config.get_bool(
+ 'refchangeshowlog', default=self.refchange_showlog
+ )
+
+ maxcommitemails = config.get('maxcommitemails')
+ if maxcommitemails is not None:
+ try:
+ self.maxcommitemails = int(maxcommitemails)
+ except ValueError:
+ sys.stderr.write(
+ '*** Malformed value for multimailhook.maxCommitEmails: %s\n' % maxcommitemails
+ + '*** Expected a number. Ignoring.\n'
+ )
+
+ diffopts = config.get('diffopts')
+ if diffopts is not None:
+ self.diffopts = shlex.split(diffopts)
+
+ logopts = config.get('logopts')
+ if logopts is not None:
+ self.logopts = shlex.split(logopts)
+
+ reply_to = config.get('replyTo')
+ self.__reply_to_refchange = config.get('replyToRefchange', default=reply_to)
+ if (
+ self.__reply_to_refchange is not None
+ and self.__reply_to_refchange.lower() == 'author'
+ ):
+ raise ConfigurationException(
+ '"author" is not an allowed setting for replyToRefchange'
+ )
+ self.__reply_to_commit = config.get('replyToCommit', default=reply_to)
+
+ def get_administrator(self):
+ return (
+ self.config.get('administrator')
+ or self.get_sender()
+ or super(ConfigOptionsEnvironmentMixin, self).get_administrator()
+ )
+
+ def get_repo_shortname(self):
+ return (
+ self.config.get('reponame')
+ or super(ConfigOptionsEnvironmentMixin, self).get_repo_shortname()
+ )
+
+ def get_emailprefix(self):
+ emailprefix = self.config.get('emailprefix')
+ if emailprefix and emailprefix.strip():
+ return emailprefix.strip() + ' '
+ else:
+ return '[%s] ' % (self.get_repo_shortname(),)
+
+ def get_sender(self):
+ return self.config.get('envelopesender')
+
+ def get_fromaddr(self):
+ fromaddr = self.config.get('from')
+ if fromaddr:
+ return fromaddr
+ else:
+ config = Config('user')
+ fromname = config.get('name', default='')
+ fromemail = config.get('email', default='')
+ if fromemail:
+ return formataddr([fromname, fromemail])
+ else:
+ return self.get_sender()
+
+ def get_reply_to_refchange(self, refchange):
+ if self.__reply_to_refchange is None:
+ return super(ConfigOptionsEnvironmentMixin, self).get_reply_to_refchange(refchange)
+ elif self.__reply_to_refchange.lower() == 'pusher':
+ return self.get_pusher_email()
+ elif self.__reply_to_refchange.lower() == 'none':
+ return None
+ else:
+ return self.__reply_to_refchange
+
+ def get_reply_to_commit(self, revision):
+ if self.__reply_to_commit is None:
+ return super(ConfigOptionsEnvironmentMixin, self).get_reply_to_commit(revision)
+ elif self.__reply_to_commit.lower() == 'author':
+ return revision.get_author()
+ elif self.__reply_to_commit.lower() == 'pusher':
+ return self.get_pusher_email()
+ elif self.__reply_to_commit.lower() == 'none':
+ return None
+ else:
+ return self.__reply_to_commit
+
+
+class FilterLinesEnvironmentMixin(Environment):
+ """Handle encoding and maximum line length of body lines.
+
+ emailmaxlinelength (int or None)
+
+ The maximum length of any single line in the email body.
+ Longer lines are truncated at that length with ' [...]'
+ appended.
+
+ strict_utf8 (bool)
+
+ If this field is set to True, then the email body text is
+ expected to be UTF-8. Any invalid characters are
+ converted to U+FFFD, the Unicode replacement character
+ (encoded as UTF-8, of course).
+
+ """
+
+ def __init__(self, strict_utf8=True, emailmaxlinelength=500, **kw):
+ super(FilterLinesEnvironmentMixin, self).__init__(**kw)
+ self.__strict_utf8 = strict_utf8
+ self.__emailmaxlinelength = emailmaxlinelength
+
+ def filter_body(self, lines):
+ lines = super(FilterLinesEnvironmentMixin, self).filter_body(lines)
+ if self.__strict_utf8:
+ lines = (line.decode(ENCODING, 'replace') for line in lines)
+ # Limit the line length in Unicode-space to avoid
+ # splitting characters:
+ if self.__emailmaxlinelength:
+ lines = limit_linelength(lines, self.__emailmaxlinelength)
+ lines = (line.encode(ENCODING, 'replace') for line in lines)
+ elif self.__emailmaxlinelength:
+ lines = limit_linelength(lines, self.__emailmaxlinelength)
+
+ return lines
+
+
+class ConfigFilterLinesEnvironmentMixin(
+ ConfigEnvironmentMixin,
+ FilterLinesEnvironmentMixin,
+ ):
+ """Handle encoding and maximum line length based on config."""
+
+ def __init__(self, config, **kw):
+ strict_utf8 = config.get_bool('emailstrictutf8', default=None)
+ if strict_utf8 is not None:
+ kw['strict_utf8'] = strict_utf8
+
+ emailmaxlinelength = config.get('emailmaxlinelength')
+ if emailmaxlinelength is not None:
+ kw['emailmaxlinelength'] = int(emailmaxlinelength)
+
+ super(ConfigFilterLinesEnvironmentMixin, self).__init__(
+ config=config, **kw
+ )
+
+
+class MaxlinesEnvironmentMixin(Environment):
+ """Limit the email body to a specified number of lines."""
+
+ def __init__(self, emailmaxlines, **kw):
+ super(MaxlinesEnvironmentMixin, self).__init__(**kw)
+ self.__emailmaxlines = emailmaxlines
+
+ def filter_body(self, lines):
+ lines = super(MaxlinesEnvironmentMixin, self).filter_body(lines)
+ if self.__emailmaxlines:
+ lines = limit_lines(lines, self.__emailmaxlines)
+ return lines
+
+
+class ConfigMaxlinesEnvironmentMixin(
+ ConfigEnvironmentMixin,
+ MaxlinesEnvironmentMixin,
+ ):
+ """Limit the email body to the number of lines specified in config."""
+
+ def __init__(self, config, **kw):
+ emailmaxlines = int(config.get('emailmaxlines', default='0'))
+ super(ConfigMaxlinesEnvironmentMixin, self).__init__(
+ config=config,
+ emailmaxlines=emailmaxlines,
+ **kw
+ )
+
+
+class PusherDomainEnvironmentMixin(ConfigEnvironmentMixin):
+ """Deduce pusher_email from pusher by appending an emaildomain."""
+
+ def __init__(self, **kw):
+ super(PusherDomainEnvironmentMixin, self).__init__(**kw)
+ self.__emaildomain = self.config.get('emaildomain')
+
+ def get_pusher_email(self):
+ if self.__emaildomain:
+ # Derive the pusher's full email address in the default way:
+ return '%s@%s' % (self.get_pusher(), self.__emaildomain)
+ else:
+ return super(PusherDomainEnvironmentMixin, self).get_pusher_email()
+
+
+class StaticRecipientsEnvironmentMixin(Environment):
+ """Set recipients statically based on constructor parameters."""
+
+ def __init__(
+ self,
+ refchange_recipients, announce_recipients, revision_recipients,
+ **kw
+ ):
+ super(StaticRecipientsEnvironmentMixin, self).__init__(**kw)
+
+ # The recipients for various types of notification emails, as
+ # RFC 2822 email addresses separated by commas (or the empty
+ # string if no recipients are configured). Although there is
+ # a mechanism to choose the recipient lists based on on the
+ # actual *contents* of the change being reported, we only
+ # choose based on the *type* of the change. Therefore we can
+ # compute them once and for all:
+ self.__refchange_recipients = refchange_recipients
+ self.__announce_recipients = announce_recipients
+ self.__revision_recipients = revision_recipients
+
+ def get_refchange_recipients(self, refchange):
+ return self.__refchange_recipients
+
+ def get_announce_recipients(self, annotated_tag_change):
+ return self.__announce_recipients
+
+ def get_revision_recipients(self, revision):
+ return self.__revision_recipients
+
+
+class ConfigRecipientsEnvironmentMixin(
+ ConfigEnvironmentMixin,
+ StaticRecipientsEnvironmentMixin
+ ):
+ """Determine recipients statically based on config."""
+
+ def __init__(self, config, **kw):
+ super(ConfigRecipientsEnvironmentMixin, self).__init__(
+ config=config,
+ refchange_recipients=self._get_recipients(
+ config, 'refchangelist', 'mailinglist',
+ ),
+ announce_recipients=self._get_recipients(
+ config, 'announcelist', 'refchangelist', 'mailinglist',
+ ),
+ revision_recipients=self._get_recipients(
+ config, 'commitlist', 'mailinglist',
+ ),
+ **kw
+ )
+
+ def _get_recipients(self, config, *names):
+ """Return the recipients for a particular type of message.
+
+ Return the list of email addresses to which a particular type
+ of notification email should be sent, by looking at the config
+ value for "multimailhook.$name" for each of names. Use the
+ value from the first name that is configured. The return
+ value is a (possibly empty) string containing RFC 2822 email
+ addresses separated by commas. If no configuration could be
+ found, raise a ConfigurationException."""
+
+ for name in names:
+ retval = config.get_recipients(name)
+ if retval is not None:
+ return retval
+ if len(names) == 1:
+ hint = 'Please set "%s.%s"' % (config.section, name)
+ else:
+ hint = (
+ 'Please set one of the following:\n "%s"'
+ % ('"\n "'.join('%s.%s' % (config.section, name) for name in names))
+ )
+
+ raise ConfigurationException(
+ 'The list of recipients for %s is not configured.\n%s' % (names[0], hint)
+ )
+
+
+class ProjectdescEnvironmentMixin(Environment):
+ """Make a "projectdesc" value available for templates.
+
+ By default, it is set to the first line of $GIT_DIR/description
+ (if that file is present and appears to be set meaningfully)."""
+
+ def __init__(self, **kw):
+ super(ProjectdescEnvironmentMixin, self).__init__(**kw)
+ self.COMPUTED_KEYS += ['projectdesc']
+
+ def get_projectdesc(self):
+ """Return a one-line descripition of the project."""
+
+ git_dir = get_git_dir()
+ try:
+ projectdesc = open(os.path.join(git_dir, 'description')).readline().strip()
+ if projectdesc and not projectdesc.startswith('Unnamed repository'):
+ return projectdesc
+ except IOError:
+ pass
+
+ return 'UNNAMED PROJECT'
+
+
+class GenericEnvironmentMixin(Environment):
+ def get_pusher(self):
+ return self.osenv.get('USER', 'unknown user')
+
+
+class GenericEnvironment(
+ ProjectdescEnvironmentMixin,
+ ConfigMaxlinesEnvironmentMixin,
+ ConfigFilterLinesEnvironmentMixin,
+ ConfigRecipientsEnvironmentMixin,
+ PusherDomainEnvironmentMixin,
+ ConfigOptionsEnvironmentMixin,
+ GenericEnvironmentMixin,
+ Environment,
+ ):
+ pass
+
+
+class GitoliteEnvironmentMixin(Environment):
+ def get_repo_shortname(self):
+ # The gitolite environment variable $GL_REPO is a pretty good
+ # repo_shortname (though it's probably not as good as a value
+ # the user might have explicitly put in his config).
+ return (
+ self.osenv.get('GL_REPO', None)
+ or super(GitoliteEnvironmentMixin, self).get_repo_shortname()
+ )
+
+ def get_pusher(self):
+ return self.osenv.get('GL_USER', 'unknown user')
+
+
+class GitoliteEnvironment(
+ ProjectdescEnvironmentMixin,
+ ConfigMaxlinesEnvironmentMixin,
+ ConfigFilterLinesEnvironmentMixin,
+ ConfigRecipientsEnvironmentMixin,
+ PusherDomainEnvironmentMixin,
+ ConfigOptionsEnvironmentMixin,
+ GitoliteEnvironmentMixin,
+ Environment,
+ ):
+ pass
+
+
+class Push(object):
+ """Represent an entire push (i.e., a group of ReferenceChanges).
+
+ It is easy to figure out what commits were added to a *branch* by
+ a Reference change:
+
+ git rev-list change.old..change.new
+
+ or removed from a *branch*:
+
+ git rev-list change.new..change.old
+
+ But it is not quite so trivial to determine which entirely new
+ commits were added to the *repository* by a push and which old
+ commits were discarded by a push. A big part of the job of this
+ class is to figure out these things, and to make sure that new
+ commits are only detailed once even if they were added to multiple
+ references.
+
+ The first step is to determine the "other" references--those
+ unaffected by the current push. They are computed by
+ Push._compute_other_ref_sha1s() by listing all references then
+ removing any affected by this push.
+
+ The commits contained in the repository before this push were
+
+ git rev-list other1 other2 other3 ... change1.old change2.old ...
+
+ Where "changeN.old" is the old value of one of the references
+ affected by this push.
+
+ The commits contained in the repository after this push are
+
+ git rev-list other1 other2 other3 ... change1.new change2.new ...
+
+ The commits added by this push are the difference between these
+ two sets, which can be written
+
+ git rev-list \
+ ^other1 ^other2 ... \
+ ^change1.old ^change2.old ... \
+ change1.new change2.new ...
+
+ The commits removed by this push can be computed by
+
+ git rev-list \
+ ^other1 ^other2 ... \
+ ^change1.new ^change2.new ... \
+ change1.old change2.old ...
+
+ The last point is that it is possible that other pushes are
+ occurring simultaneously to this one, so reference values can
+ change at any time. It is impossible to eliminate all race
+ conditions, but we reduce the window of time during which problems
+ can occur by translating reference names to SHA1s as soon as
+ possible and working with SHA1s thereafter (because SHA1s are
+ immutable)."""
+
+ # A map {(changeclass, changetype) : integer} specifying the order
+ # that reference changes will be processed if multiple reference
+ # changes are included in a single push. The order is significant
+ # mostly because new commit notifications are threaded together
+ # with the first reference change that includes the commit. The
+ # following order thus causes commits to be grouped with branch
+ # changes (as opposed to tag changes) if possible.
+ SORT_ORDER = dict(
+ (value, i) for (i, value) in enumerate([
+ (BranchChange, 'update'),
+ (BranchChange, 'create'),
+ (AnnotatedTagChange, 'update'),
+ (AnnotatedTagChange, 'create'),
+ (NonAnnotatedTagChange, 'update'),
+ (NonAnnotatedTagChange, 'create'),
+ (BranchChange, 'delete'),
+ (AnnotatedTagChange, 'delete'),
+ (NonAnnotatedTagChange, 'delete'),
+ (OtherReferenceChange, 'update'),
+ (OtherReferenceChange, 'create'),
+ (OtherReferenceChange, 'delete'),
+ ])
+ )
+
+ def __init__(self, changes):
+ self.changes = sorted(changes, key=self._sort_key)
+
+ # The SHA-1s of commits referred to by references unaffected
+ # by this push:
+ other_ref_sha1s = self._compute_other_ref_sha1s()
+
+ self._old_rev_exclusion_spec = self._compute_rev_exclusion_spec(
+ other_ref_sha1s.union(
+ change.old.sha1
+ for change in self.changes
+ if change.old.type in ['commit', 'tag']
+ )
+ )
+ self._new_rev_exclusion_spec = self._compute_rev_exclusion_spec(
+ other_ref_sha1s.union(
+ change.new.sha1
+ for change in self.changes
+ if change.new.type in ['commit', 'tag']
+ )
+ )
+
+ @classmethod
+ def _sort_key(klass, change):
+ return (klass.SORT_ORDER[change.__class__, change.change_type], change.refname,)
+
+ def _compute_other_ref_sha1s(self):
+ """Return the GitObjects referred to by references unaffected by this push."""
+
+ # The refnames being changed by this push:
+ updated_refs = set(
+ change.refname
+ for change in self.changes
+ )
+
+ # The SHA-1s of commits referred to by all references in this
+ # repository *except* updated_refs:
+ sha1s = set()
+ fmt = (
+ '%(objectname) %(objecttype) %(refname)\n'
+ '%(*objectname) %(*objecttype) %(refname)'
+ )
+ for line in read_git_lines(['for-each-ref', '--format=%s' % (fmt,)]):
+ (sha1, type, name) = line.split(' ', 2)
+ if sha1 and type == 'commit' and name not in updated_refs:
+ sha1s.add(sha1)
+
+ return sha1s
+
+ def _compute_rev_exclusion_spec(self, sha1s):
+ """Return an exclusion specification for 'git rev-list'.
+
+ git_objects is an iterable over GitObject instances. Return a
+ string that can be passed to the standard input of 'git
+ rev-list --stdin' to exclude all of the commits referred to by
+ git_objects."""
+
+ return ''.join(
+ ['^%s\n' % (sha1,) for sha1 in sorted(sha1s)]
+ )
+
+ def get_new_commits(self, reference_change=None):
+ """Return a list of commits added by this push.
+
+ Return a list of the object names of commits that were added
+ by the part of this push represented by reference_change. If
+ reference_change is None, then return a list of *all* commits
+ added by this push."""
+
+ if not reference_change:
+ new_revs = sorted(
+ change.new.sha1
+ for change in self.changes
+ if change.new
+ )
+ elif not reference_change.new.commit_sha1:
+ return []
+ else:
+ new_revs = [reference_change.new.commit_sha1]
+
+ cmd = ['rev-list', '--stdin'] + new_revs
+ return read_git_lines(cmd, input=self._old_rev_exclusion_spec)
+
+ def get_discarded_commits(self, reference_change):
+ """Return a list of commits discarded by this push.
+
+ Return a list of the object names of commits that were
+ entirely discarded from the repository by the part of this
+ push represented by reference_change."""
+
+ if not reference_change.old.commit_sha1:
+ return []
+ else:
+ old_revs = [reference_change.old.commit_sha1]
+
+ cmd = ['rev-list', '--stdin'] + old_revs
+ return read_git_lines(cmd, input=self._new_rev_exclusion_spec)
+
+ def send_emails(self, mailer, body_filter=None):
+ """Use send all of the notification emails needed for this push.
+
+ Use send all of the notification emails (including reference
+ change emails and commit emails) needed for this push. Send
+ the emails using mailer. If body_filter is not None, then use
+ it to filter the lines that are intended for the email
+ body."""
+
+ # The sha1s of commits that were introduced by this push.
+ # They will be removed from this set as they are processed, to
+ # guarantee that one (and only one) email is generated for
+ # each new commit.
+ unhandled_sha1s = set(self.get_new_commits())
+ for change in self.changes:
+ # Check if we've got anyone to send to
+ if not change.recipients:
+ sys.stderr.write(
+ '*** no recipients configured so no email will be sent\n'
+ '*** for %r update %s->%s\n'
+ % (change.refname, change.old.sha1, change.new.sha1,)
+ )
+ else:
+ sys.stderr.write('Sending notification emails to: %s\n' % (change.recipients,))
+ mailer.send(change.generate_email(self, body_filter), change.recipients)
+
+ sha1s = []
+ for sha1 in reversed(list(self.get_new_commits(change))):
+ if sha1 in unhandled_sha1s:
+ sha1s.append(sha1)
+ unhandled_sha1s.remove(sha1)
+
+ max_emails = change.environment.maxcommitemails
+ if max_emails and len(sha1s) > max_emails:
+ sys.stderr.write(
+ '*** Too many new commits (%d), not sending commit emails.\n' % len(sha1s)
+ + '*** Try setting multimailhook.maxCommitEmails to a greater value\n'
+ + '*** Currently, multimailhook.maxCommitEmails=%d\n' % max_emails
+ )
+ return
+
+ for (num, sha1) in enumerate(sha1s):
+ rev = Revision(change, GitObject(sha1), num=num+1, tot=len(sha1s))
+ if rev.recipients:
+ mailer.send(rev.generate_email(self, body_filter), rev.recipients)
+
+ # Consistency check:
+ if unhandled_sha1s:
+ sys.stderr.write(
+ 'ERROR: No emails were sent for the following new commits:\n'
+ ' %s\n'
+ % ('\n '.join(sorted(unhandled_sha1s)),)
+ )
+
+
+def run_as_post_receive_hook(environment, mailer):
+ changes = []
+ for line in sys.stdin:
+ (oldrev, newrev, refname) = line.strip().split(' ', 2)
+ changes.append(
+ ReferenceChange.create(environment, oldrev, newrev, refname)
+ )
+ push = Push(changes)
+ push.send_emails(mailer, body_filter=environment.filter_body)
+
+
+def run_as_update_hook(environment, mailer, refname, oldrev, newrev):
+ changes = [
+ ReferenceChange.create(
+ environment,
+ read_git_output(['rev-parse', '--verify', oldrev]),
+ read_git_output(['rev-parse', '--verify', newrev]),
+ refname,
+ ),
+ ]
+ push = Push(changes)
+ push.send_emails(mailer, body_filter=environment.filter_body)
+
+
+def choose_mailer(config, environment):
+ mailer = config.get('mailer', default='sendmail')
+
+ if mailer == 'smtp':
+ smtpserver = config.get('smtpserver', default='localhost')
+ mailer = SMTPMailer(
+ envelopesender=(environment.get_sender() or environment.get_fromaddr()),
+ smtpserver=smtpserver,
+ )
+ elif mailer == 'sendmail':
+ command = config.get('sendmailcommand')
+ if command:
+ command = shlex.split(command)
+ mailer = SendMailer(command=command, envelopesender=environment.get_sender())
+ else:
+ sys.stderr.write(
+ 'fatal: multimailhook.mailer is set to an incorrect value: "%s"\n' % mailer
+ + 'please use one of "smtp" or "sendmail".\n'
+ )
+ sys.exit(1)
+ return mailer
+
+
+KNOWN_ENVIRONMENTS = {
+ 'generic' : GenericEnvironmentMixin,
+ 'gitolite' : GitoliteEnvironmentMixin,
+ }
+
+
+def choose_environment(config, osenv=None, env=None, recipients=None):
+ if not osenv:
+ osenv = os.environ
+
+ environment_mixins = [
+ ProjectdescEnvironmentMixin,
+ ConfigMaxlinesEnvironmentMixin,
+ ConfigFilterLinesEnvironmentMixin,
+ PusherDomainEnvironmentMixin,
+ ConfigOptionsEnvironmentMixin,
+ ]
+ environment_kw = {
+ 'osenv' : osenv,
+ 'config' : config,
+ }
+
+ if not env:
+ env = config.get('environment')
+
+ if not env:
+ if 'GL_USER' in osenv and 'GL_REPO' in osenv:
+ env = 'gitolite'
+ else:
+ env = 'generic'
+
+ environment_mixins.append(KNOWN_ENVIRONMENTS[env])
+
+ if recipients:
+ environment_mixins.insert(0, StaticRecipientsEnvironmentMixin)
+ environment_kw['refchange_recipients'] = recipients
+ environment_kw['announce_recipients'] = recipients
+ environment_kw['revision_recipients'] = recipients
+ else:
+ environment_mixins.insert(0, ConfigRecipientsEnvironmentMixin)
+
+ environment_klass = type(
+ 'EffectiveEnvironment',
+ tuple(environment_mixins) + (Environment,),
+ {},
+ )
+ return environment_klass(**environment_kw)
+
+
+def main(args):
+ parser = optparse.OptionParser(
+ description=__doc__,
+ usage='%prog [OPTIONS]\n or: %prog [OPTIONS] REFNAME OLDREV NEWREV',
+ )
+
+ parser.add_option(
+ '--environment', '--env', action='store', type='choice',
+ choices=['generic', 'gitolite'], default=None,
+ help=(
+ 'Choose type of environment is in use. Default is taken from '
+ 'multimailhook.environment if set; otherwise "generic".'
+ ),
+ )
+ parser.add_option(
+ '--stdout', action='store_true', default=False,
+ help='Output emails to stdout rather than sending them.',
+ )
+ parser.add_option(
+ '--recipients', action='store', default=None,
+ help='Set list of email recipients for all types of emails.',
+ )
+ parser.add_option(
+ '--show-env', action='store_true', default=False,
+ help=(
+ 'Write to stderr the values determined for the environment '
+ '(intended for debugging purposes).'
+ ),
+ )
+
+ (options, args) = parser.parse_args(args)
+
+ config = Config('multimailhook')
+
+ try:
+ environment = choose_environment(
+ config, osenv=os.environ,
+ env=options.environment,
+ recipients=options.recipients,
+ )
+
+ if options.show_env:
+ sys.stderr.write('Environment values:\n')
+ for (k,v) in sorted(environment.get_values().items()):
+ sys.stderr.write(' %s : %r\n' % (k,v))
+ sys.stderr.write('\n')
+
+ if options.stdout:
+ mailer = OutputMailer(sys.stdout)
+ else:
+ mailer = choose_mailer(config, environment)
+
+ # Dual mode: if arguments were specified on the command line, run
+ # like an update hook; otherwise, run as a post-receive hook.
+ if args:
+ if len(args) != 3:
+ parser.error('Need zero or three non-option arguments')
+ (refname, oldrev, newrev) = args
+ run_as_update_hook(environment, mailer, refname, oldrev, newrev)
+ else:
+ run_as_post_receive_hook(environment, mailer)
+ except ConfigurationException, e:
+ sys.exit(str(e))
+
+
+if __name__ == '__main__':
+ main(sys.argv[1:])
--- /dev/null
+#! /usr/bin/env python2
+
+"""Migrate a post-receive-email configuration to be usable with git_multimail.py.
+
+See README.migrate-from-post-receive-email for more information.
+
+"""
+
+import sys
+import optparse
+
+from git_multimail import CommandError
+from git_multimail import Config
+from git_multimail import read_output
+
+
+OLD_NAMES = [
+ 'mailinglist',
+ 'announcelist',
+ 'envelopesender',
+ 'emailprefix',
+ 'showrev',
+ 'emailmaxlines',
+ 'diffopts',
+ ]
+
+NEW_NAMES = [
+ 'environment',
+ 'reponame',
+ 'mailinglist',
+ 'refchangelist',
+ 'commitlist',
+ 'announcelist',
+ 'announceshortlog',
+ 'envelopesender',
+ 'administrator',
+ 'emailprefix',
+ 'emailmaxlines',
+ 'diffopts',
+ 'emaildomain',
+ ]
+
+
+INFO = """\
+
+SUCCESS!
+
+Your post-receive-email configuration has been converted to
+git-multimail format. Please see README and
+README.migrate-from-post-receive-email to learn about other
+git-multimail configuration possibilities.
+
+For example, git-multimail has the following new options with no
+equivalent in post-receive-email. You might want to read about them
+to see if they would be useful in your situation:
+
+"""
+
+
+def _check_old_config_exists(old):
+ """Check that at least one old configuration value is set."""
+
+ for name in OLD_NAMES:
+ if old.has_key(name):
+ return True
+
+ return False
+
+
+def _check_new_config_clear(new):
+ """Check that none of the new configuration names are set."""
+
+ retval = True
+ for name in NEW_NAMES:
+ if new.has_key(name):
+ if retval:
+ sys.stderr.write('INFO: The following configuration values already exist:\n\n')
+ sys.stderr.write(' "%s.%s"\n' % (new.section, name))
+ retval = False
+
+ return retval
+
+
+def erase_values(config, names):
+ for name in names:
+ if config.has_key(name):
+ try:
+ sys.stderr.write('...unsetting "%s.%s"\n' % (config.section, name))
+ config.unset_all(name)
+ except CommandError:
+ sys.stderr.write(
+ '\nWARNING: could not unset "%s.%s". '
+ 'Perhaps it is not set at the --local level?\n\n'
+ % (config.section, name)
+ )
+
+
+def is_section_empty(section, local):
+ """Return True iff the specified configuration section is empty.
+
+ Iff local is True, use the --local option when invoking 'git
+ config'."""
+
+ if local:
+ local_option = ['--local']
+ else:
+ local_option = []
+
+ try:
+ read_output(
+ ['git', 'config']
+ + local_option
+ + ['--get-regexp', '^%s\.' % (section,)]
+ )
+ except CommandError, e:
+ if e.retcode == 1:
+ # This means that no settings were found.
+ return True
+ else:
+ raise
+ else:
+ return False
+
+
+def remove_section_if_empty(section):
+ """If the specified configuration section is empty, delete it."""
+
+ try:
+ empty = is_section_empty(section, local=True)
+ except CommandError:
+ # Older versions of git do not support the --local option, so
+ # if the first attempt fails, try without --local.
+ try:
+ empty = is_section_empty(section, local=False)
+ except CommandError:
+ sys.stderr.write(
+ '\nINFO: If configuration section "%s.*" is empty, you might want '
+ 'to delete it.\n\n'
+ % (section,)
+ )
+ return
+
+ if empty:
+ sys.stderr.write('...removing section "%s.*"\n' % (section,))
+ read_output(['git', 'config', '--remove-section', section])
+ else:
+ sys.stderr.write(
+ '\nINFO: Configuration section "%s.*" still has contents. '
+ 'It will not be deleted.\n\n'
+ % (section,)
+ )
+
+
+def migrate_config(strict=False, retain=False, overwrite=False):
+ old = Config('hooks')
+ new = Config('multimailhook')
+ if not _check_old_config_exists(old):
+ sys.exit(
+ 'Your repository has no post-receive-email configuration. '
+ 'Nothing to do.'
+ )
+ if not _check_new_config_clear(new):
+ if overwrite:
+ sys.stderr.write('\nWARNING: Erasing the above values...\n\n')
+ erase_values(new, NEW_NAMES)
+ else:
+ sys.exit(
+ '\nERROR: Refusing to overwrite existing values. Use the --overwrite\n'
+ 'option to continue anyway.'
+ )
+
+ name = 'showrev'
+ if old.has_key(name):
+ msg = 'git-multimail does not support "%s.%s"' % (old.section, name,)
+ if strict:
+ sys.exit(
+ 'ERROR: %s.\n'
+ 'Please unset that value then try again, or run without --strict.'
+ % (msg,)
+ )
+ else:
+ sys.stderr.write('\nWARNING: %s (ignoring).\n\n' % (msg,))
+
+ for name in ['mailinglist', 'announcelist']:
+ if old.has_key(name):
+ sys.stderr.write(
+ '...copying "%s.%s" to "%s.%s"\n' % (old.section, name, new.section, name)
+ )
+ new.set_recipients(name, old.get_recipients(name))
+
+ if strict:
+ sys.stderr.write(
+ '...setting "%s.commitlist" to the empty string\n' % (new.section,)
+ )
+ new.set_recipients('commitlist', '')
+ sys.stderr.write(
+ '...setting "%s.announceshortlog" to "true"\n' % (new.section,)
+ )
+ new.set('announceshortlog', 'true')
+
+ for name in ['envelopesender', 'emailmaxlines', 'diffopts']:
+ if old.has_key(name):
+ sys.stderr.write(
+ '...copying "%s.%s" to "%s.%s"\n' % (old.section, name, new.section, name)
+ )
+ new.set(name, old.get(name))
+
+ name = 'emailprefix'
+ if old.has_key(name):
+ sys.stderr.write(
+ '...copying "%s.%s" to "%s.%s"\n' % (old.section, name, new.section, name)
+ )
+ new.set(name, old.get(name))
+ elif strict:
+ sys.stderr.write(
+ '...setting "%s.%s" to "[SCM]" to preserve old subject lines\n'
+ % (new.section, name)
+ )
+ new.set(name, '[SCM]')
+
+ if not retain:
+ erase_values(old, OLD_NAMES)
+ remove_section_if_empty(old.section)
+
+ sys.stderr.write(INFO)
+ for name in NEW_NAMES:
+ if name not in OLD_NAMES:
+ sys.stderr.write(' "%s.%s"\n' % (new.section, name,))
+ sys.stderr.write('\n')
+
+
+def main(args):
+ parser = optparse.OptionParser(
+ description=__doc__,
+ usage='%prog [OPTIONS]',
+ )
+
+ parser.add_option(
+ '--strict', action='store_true', default=False,
+ help=(
+ 'Slavishly configure git-multimail as closely as possible to '
+ 'the post-receive-email configuration. Default is to turn '
+ 'on some new features that have no equivalent in post-receive-email.'
+ ),
+ )
+ parser.add_option(
+ '--retain', action='store_true', default=False,
+ help=(
+ 'Retain the post-receive-email configuration values. '
+ 'Default is to delete them after the new values are set.'
+ ),
+ )
+ parser.add_option(
+ '--overwrite', action='store_true', default=False,
+ help=(
+ 'Overwrite any existing git-multimail configuration settings. '
+ 'Default is to abort if such settings already exist.'
+ ),
+ )
+
+ (options, args) = parser.parse_args(args)
+
+ if args:
+ parser.error('Unexpected arguments: %s' % (' '.join(args),))
+
+ migrate_config(strict=options.strict, retain=options.retain, overwrite=options.overwrite)
+
+
+main(sys.argv[1:])
--- /dev/null
+#! /usr/bin/env python2
+
+"""Example post-receive hook based on git-multimail.
+
+This script is a simple example of a post-receive hook implemented
+using git_multimail.py as a Python module. It is intended to be
+customized before use; see the comments in the script to help you get
+started.
+
+It is possible to use git_multimail.py itself as a post-receive or
+update hook, configured via git config settings and/or command-line
+parameters. But for more flexibility, it can also be imported as a
+Python module by a custom post-receive script as done here. The
+latter has the following advantages:
+
+* The tool's behavior can be customized using arbitrary Python code,
+ without having to edit git_multimail.py.
+
+* Configuration settings can be read from other sources; for example,
+ user names and email addresses could be read from LDAP or from a
+ database. Or the settings can even be hardcoded in the importing
+ Python script, if this is preferred.
+
+This script is a very basic example of how to use git_multimail.py as
+a module. The comments below explain some of the points at which the
+script's behavior could be changed or customized.
+
+"""
+
+import sys
+import os
+
+# If necessary, add the path to the directory containing
+# git_multimail.py to the Python path as follows. (This is not
+# necessary if git_multimail.py is in the same directory as this
+# script):
+
+#LIBDIR = 'path/to/directory/containing/module'
+#sys.path.insert(0, LIBDIR)
+
+import git_multimail
+
+
+# It is possible to modify the output templates here; e.g.:
+
+#git_multimail.FOOTER_TEMPLATE = """\
+#
+#-- \n\
+#This email was generated by the wonderful git-multimail tool.
+#"""
+
+
+# Specify which "git config" section contains the configuration for
+# git-multimail:
+config = git_multimail.Config('multimailhook')
+
+
+# Select the type of environment:
+environment = git_multimail.GenericEnvironment(config=config)
+#environment = git_multimail.GitoliteEnvironment(config=config)
+
+
+# Choose the method of sending emails based on the git config:
+mailer = git_multimail.choose_mailer(config, environment)
+
+# Alternatively, you may hardcode the mailer using code like one of
+# the following:
+
+# Use "/usr/sbin/sendmail -t" to send emails. The envelopesender
+# argument is optional:
+#mailer = git_multimail.SendMailer(
+# command=['/usr/sbin/sendmail', '-t'],
+# envelopesender='git-repo@example.com',
+# )
+
+# Use Python's smtplib to send emails. Both arguments are required.
+#mailer = git_multimail.SMTPMailer(
+# envelopesender='git-repo@example.com',
+# # The smtpserver argument can also include a port number; e.g.,
+# # smtpserver='mail.example.com:25'
+# smtpserver='mail.example.com',
+# )
+
+# OutputMailer is intended only for testing; it writes the emails to
+# the specified file stream.
+#mailer = git_multimail.OutputMailer(sys.stdout)
+
+
+# Read changes from stdin and send notification emails:
+git_multimail.run_as_post_receive_hook(environment, mailer)
#
# Copyright (c) 2007 Andy Parkins
#
-# An example hook script to mail out commit update information. This hook
-# sends emails listing new revisions to the repository introduced by the
-# change being reported. The rule is that (for branch updates) each commit
-# will appear on one email and one email only.
+# An example hook script to mail out commit update information.
+#
+# NOTE: This script is no longer under active development. There
+# is another script, git-multimail, which is more capable and
+# configurable and is largely backwards-compatible with this script;
+# please see "contrib/hooks/multimail/". For instructions on how to
+# migrate from post-receive-email to git-multimail, please see
+# "README.migrate-from-post-receive-email" in that directory.
+#
+# This hook sends emails listing new revisions to the repository
+# introduced by the change being reported. The rule is that (for
+# branch updates) each commit will appear on one email and one email
+# only.
#
# This hook is stored in the contrib/hooks directory. Your distribution
# will have put this somewhere standard. You should make this script
--- /dev/null
+package Git::Mediawiki;
+
+use 5.008;
+use strict;
+use Git;
+
+BEGIN {
+
+our ($VERSION, @ISA, @EXPORT, @EXPORT_OK);
+
+# Totally unstable API.
+$VERSION = '0.01';
+
+require Exporter;
+
+@ISA = qw(Exporter);
+
+@EXPORT = ();
+
+# Methods which can be called as standalone functions as well:
+@EXPORT_OK = qw(clean_filename smudge_filename connect_maybe
+ EMPTY HTTP_CODE_OK HTTP_CODE_PAGE_NOT_FOUND);
+}
+
+# Mediawiki filenames can contain forward slashes. This variable decides by which pattern they should be replaced
+use constant SLASH_REPLACEMENT => '%2F';
+
+# Used to test for empty strings
+use constant EMPTY => q{};
+
+# HTTP codes
+use constant HTTP_CODE_OK => 200;
+use constant HTTP_CODE_PAGE_NOT_FOUND => 404;
+
+sub clean_filename {
+ my $filename = shift;
+ $filename =~ s{@{[SLASH_REPLACEMENT]}}{/}g;
+ # [, ], |, {, and } are forbidden by MediaWiki, even URL-encoded.
+ # Do a variant of URL-encoding, i.e. looks like URL-encoding,
+ # but with _ added to prevent MediaWiki from thinking this is
+ # an actual special character.
+ $filename =~ s/[\[\]\{\}\|]/sprintf("_%%_%x", ord($&))/ge;
+ # If we use the uri escape before
+ # we should unescape here, before anything
+
+ return $filename;
+}
+
+sub smudge_filename {
+ my $filename = shift;
+ $filename =~ s{/}{@{[SLASH_REPLACEMENT]}}g;
+ $filename =~ s/ /_/g;
+ # Decode forbidden characters encoded in clean_filename
+ $filename =~ s/_%_([0-9a-fA-F][0-9a-fA-F])/sprintf('%c', hex($1))/ge;
+ return $filename;
+}
+
+sub connect_maybe {
+ my $wiki = shift;
+ if ($wiki) {
+ return $wiki;
+ }
+
+ my $remote_name = shift;
+ my $remote_url = shift;
+ my ($wiki_login, $wiki_password, $wiki_domain);
+
+ $wiki_login = Git::config("remote.${remote_name}.mwLogin");
+ $wiki_password = Git::config("remote.${remote_name}.mwPassword");
+ $wiki_domain = Git::config("remote.${remote_name}.mwDomain");
+
+ $wiki = MediaWiki::API->new;
+ $wiki->{config}->{api_url} = "${remote_url}/api.php";
+ if ($wiki_login) {
+ my %credential = (
+ 'url' => $remote_url,
+ 'username' => $wiki_login,
+ 'password' => $wiki_password
+ );
+ Git::credential(\%credential);
+ my $request = {lgname => $credential{username},
+ lgpassword => $credential{password},
+ lgdomain => $wiki_domain};
+ if ($wiki->login($request)) {
+ Git::credential(\%credential, 'approve');
+ print {*STDERR} qq(Logged in mediawiki user "$credential{username}".\n);
+ } else {
+ print {*STDERR} qq(Failed to log in mediawiki user "$credential{username}" on ${remote_url}\n);
+ print {*STDERR} ' (error ' .
+ $wiki->{error}->{code} . ': ' .
+ $wiki->{error}->{details} . ")\n";
+ Git::credential(\%credential, 'reject');
+ exit 1;
+ }
+ }
+
+ return $wiki;
+}
+
+1; # Famous last words
# Copyright (C) 2013
# Matthieu Moy <Matthieu.Moy@imag.fr>
#
-## Build git-remote-mediawiki
+# To build and test:
+#
+# make
+# bin-wrapper/git mw preview Some_page.mw
+# bin-wrapper/git clone mediawiki::http://example.com/wiki/
+#
+# To install, run Git's toplevel 'make install' then run:
+#
+# make install
+GIT_MEDIAWIKI_PM=Git/Mediawiki.pm
SCRIPT_PERL=git-remote-mediawiki.perl
+SCRIPT_PERL+=git-mw.perl
GIT_ROOT_DIR=../..
HERE=contrib/mw-to-git/
SCRIPT_PERL_FULL=$(patsubst %,$(HERE)/%,$(SCRIPT_PERL))
+INSTLIBDIR=$(shell $(MAKE) -C $(GIT_ROOT_DIR)/perl \
+ -s --no-print-directory instlibdir)
all: build
-build install clean:
- $(MAKE) -C $(GIT_ROOT_DIR) SCRIPT_PERL=$(SCRIPT_PERL_FULL) \
- $@-perl-script
+install_pm:
+ install $(GIT_MEDIAWIKI_PM) $(INSTLIBDIR)/$(GIT_MEDIAWIKI_PM)
+
+build:
+ $(MAKE) -C $(GIT_ROOT_DIR) SCRIPT_PERL="$(SCRIPT_PERL_FULL)" \
+ build-perl-script
+
+install: install_pm
+ $(MAKE) -C $(GIT_ROOT_DIR) SCRIPT_PERL="$(SCRIPT_PERL_FULL)" \
+ install-perl-script
+
+clean:
+ $(MAKE) -C $(GIT_ROOT_DIR) SCRIPT_PERL="$(SCRIPT_PERL_FULL)" \
+ clean-perl-script
+ rm $(INSTLIBDIR)/$(GIT_MEDIAWIKI_PM)
+
perlcritic:
perlcritic -2 *.perl
--- /dev/null
+#!/bin/sh
+
+# git executable wrapper script for Git-Mediawiki to run tests without
+# installing all the scripts and perl packages.
+
+GIT_ROOT_DIR=../../..
+GIT_EXEC_PATH=$(cd "$(dirname "$0")" && cd ${GIT_ROOT_DIR} && pwd)
+
+GITPERLLIB="$GIT_EXEC_PATH"'/contrib/mw-to-git'"${GITPERLLIB:+:$GITPERLLIB}"
+PATH="$GIT_EXEC_PATH"'/contrib/mw-to-git:'"$PATH"
+
+export GITPERLLIB PATH
+
+exec "${GIT_EXEC_PATH}/bin-wrappers/git" "$@"
--- /dev/null
+#!/usr/bin/perl
+
+# Copyright (C) 2013
+# Benoit Person <benoit.person@ensimag.imag.fr>
+# Celestin Matte <celestin.matte@ensimag.imag.fr>
+# License: GPL v2 or later
+
+# Set of tools for git repo with a mediawiki remote.
+# Documentation & bugtracker: https://github.com/moy/Git-Mediawiki/
+
+use strict;
+use warnings;
+
+use Getopt::Long;
+use URI::URL qw(url);
+use LWP::UserAgent;
+use HTML::TreeBuilder;
+
+use Git;
+use MediaWiki::API;
+use Git::Mediawiki qw(clean_filename connect_maybe
+ EMPTY HTTP_CODE_PAGE_NOT_FOUND);
+
+# By default, use UTF-8 to communicate with Git and the user
+binmode STDERR, ':encoding(UTF-8)';
+binmode STDOUT, ':encoding(UTF-8)';
+
+# Global parameters
+my $verbose = 0;
+sub v_print {
+ if ($verbose) {
+ return print {*STDERR} @_;
+ }
+ return;
+}
+
+# Preview parameters
+my $file_name = EMPTY;
+my $remote_name = EMPTY;
+my $preview_file_name = EMPTY;
+my $autoload = 0;
+sub file {
+ $file_name = shift;
+ return $file_name;
+}
+
+my %commands = (
+ 'help' =>
+ [\&help, {}, \&help],
+ 'preview' =>
+ [\&preview, {
+ '<>' => \&file,
+ 'output|o=s' => \$preview_file_name,
+ 'remote|r=s' => \$remote_name,
+ 'autoload|a' => \$autoload
+ }, \&preview_help]
+);
+
+# Search for sub-command
+my $cmd = $commands{'help'};
+for (0..@ARGV-1) {
+ if (defined $commands{$ARGV[$_]}) {
+ $cmd = $commands{$ARGV[$_]};
+ splice @ARGV, $_, 1;
+ last;
+ }
+};
+GetOptions( %{$cmd->[1]},
+ 'help|h' => \&{$cmd->[2]},
+ 'verbose|v' => \$verbose);
+
+# Launch command
+&{$cmd->[0]};
+
+############################# Preview Functions ################################
+
+sub preview_help {
+ print {*STDOUT} <<'END';
+USAGE: git mw preview [--remote|-r <remote name>] [--autoload|-a]
+ [--output|-o <output filename>] [--verbose|-v]
+ <blob> | <filename>
+
+DESCRIPTION:
+Preview is an utiliy to preview local content of a mediawiki repo as if it was
+pushed on the remote.
+
+For that, preview searches for the remote name of the current branch's
+upstream if --remote is not set. If that remote is not found or if it
+is not a mediawiki, it lists all mediawiki remotes configured and asks
+you to replay your command with the --remote option set properly.
+
+Then, it searches for a file named 'filename'. If it's not found in
+the current dir, it will assume it's a blob.
+
+The content retrieved in the file (or in the blob) will then be parsed
+by the remote mediawiki and combined with a template retrieved from
+the mediawiki.
+
+Finally, preview will save the HTML result in a file. and autoload it
+in your default web browser if the option --autoload is present.
+
+OPTIONS:
+ -r <remote name>, --remote <remote name>
+ If the remote is a mediawiki, the template and the parse engine
+ used for the preview will be those of that remote.
+ If not, a list of valid remotes will be shown.
+
+ -a, --autoload
+ Try to load the HTML output in a new tab (or new window) of your
+ default web browser.
+
+ -o <output filename>, --output <output filename>
+ Change the HTML output filename. Default filename is based on the
+ input filename with its extension replaced by '.html'.
+
+ -v, --verbose
+ Show more information on what's going on under the hood.
+END
+ exit;
+}
+
+sub preview {
+ my $wiki;
+ my ($remote_url, $wiki_page_name);
+ my ($new_content, $template);
+ my $file_content;
+
+ if ($file_name eq EMPTY) {
+ die "Missing file argument, see `git mw help`\n";
+ }
+
+ v_print("### Selecting remote\n");
+ if ($remote_name eq EMPTY) {
+ $remote_name = find_upstream_remote_name();
+ if ($remote_name) {
+ $remote_url = mediawiki_remote_url_maybe($remote_name);
+ }
+
+ if (! $remote_url) {
+ my @valid_remotes = find_mediawiki_remotes();
+
+ if ($#valid_remotes == 0) {
+ print {*STDERR} "No mediawiki remote in this repo. \n";
+ exit 1;
+ } else {
+ my $remotes_list = join("\n\t", @valid_remotes);
+ print {*STDERR} <<"MESSAGE";
+There are multiple mediawiki remotes, which of:
+ ${remotes_list}
+do you want ? Use the -r option to specify the remote.
+MESSAGE
+ }
+
+ exit 1;
+ }
+ } else {
+ if (!is_valid_remote($remote_name)) {
+ die "${remote_name} is not a remote\n";
+ }
+
+ $remote_url = mediawiki_remote_url_maybe($remote_name);
+ if (! $remote_url) {
+ die "${remote_name} is not a mediawiki remote\n";
+ }
+ }
+ v_print("selected remote:\n\tname: ${remote_name}\n\turl: ${remote_url}\n");
+
+ $wiki = connect_maybe($wiki, $remote_name, $remote_url);
+
+ # Read file content
+ if (! -e $file_name) {
+ $file_content = git_cmd_try {
+ Git::command('cat-file', 'blob', $file_name); }
+ "%s failed w/ code %d";
+
+ if ($file_name =~ /(.+):(.+)/) {
+ $file_name = $2;
+ }
+ } else {
+ open my $read_fh, "<", $file_name
+ or die "could not open ${file_name}: $!\n";
+ $file_content = do { local $/ = undef; <$read_fh> };
+ close $read_fh
+ or die "unable to close: $!\n";
+ }
+
+ v_print("### Retrieving template\n");
+ ($wiki_page_name = clean_filename($file_name)) =~ s/\.[^.]+$//;
+ $template = get_template($remote_url, $wiki_page_name);
+
+ v_print("### Parsing local content\n");
+ $new_content = $wiki->api({
+ action => 'parse',
+ text => $file_content,
+ title => $wiki_page_name
+ }, {
+ skip_encoding => 1
+ }) or die "No response from remote mediawiki\n";
+ $new_content = $new_content->{'parse'}->{'text'}->{'*'};
+
+ v_print("### Merging contents\n");
+ if ($preview_file_name eq EMPTY) {
+ ($preview_file_name = $file_name) =~ s/\.[^.]+$/.html/;
+ }
+ open(my $save_fh, '>:encoding(UTF-8)', $preview_file_name)
+ or die "Could not open: $!\n";
+ print {$save_fh} merge_contents($template, $new_content, $remote_url);
+ close($save_fh)
+ or die "Could not close: $!\n";
+
+ v_print("### Results\n");
+ if ($autoload) {
+ v_print("Launching browser w/ file: ${preview_file_name}");
+ system('git', 'web--browse', $preview_file_name);
+ } else {
+ print {*STDERR} "Preview file saved as: ${preview_file_name}\n";
+ }
+
+ exit;
+}
+
+# uses global scope variable: $remote_name
+sub merge_contents {
+ my $template = shift;
+ my $content = shift;
+ my $remote_url = shift;
+ my ($content_tree, $html_tree, $mw_content_text);
+ my $template_content_id = 'bodyContent';
+
+ $html_tree = HTML::TreeBuilder->new;
+ $html_tree->parse($template);
+
+ $content_tree = HTML::TreeBuilder->new;
+ $content_tree->parse($content);
+
+ $template_content_id = Git::config("remote.${remote_name}.mwIDcontent")
+ || $template_content_id;
+ v_print("Using '${template_content_id}' as the content ID\n");
+
+ $mw_content_text = $html_tree->look_down('id', $template_content_id);
+ if (!defined $mw_content_text) {
+ print {*STDERR} <<"CONFIG";
+Could not combine the new content with the template. You might want to
+configure `mediawiki.IDContent` in your config:
+ git config --add remote.${remote_name}.mwIDcontent <id>
+and re-run the command afterward.
+CONFIG
+ exit 1;
+ }
+ $mw_content_text->delete_content();
+ $mw_content_text->push_content($content_tree);
+
+ make_links_absolute($html_tree, $remote_url);
+
+ return $html_tree->as_HTML;
+}
+
+sub make_links_absolute {
+ my $html_tree = shift;
+ my $remote_url = shift;
+ for (@{ $html_tree->extract_links() }) {
+ my ($link, $element, $attr) = @{ $_ };
+ my $url = url($link)->canonical;
+ if ($url !~ /#/) {
+ $element->attr($attr, URI->new_abs($url, $remote_url));
+ }
+ }
+ return $html_tree;
+}
+
+sub is_valid_remote {
+ my $remote = shift;
+ my @remotes = git_cmd_try {
+ Git::command('remote') }
+ "%s failed w/ code %d";
+ my $found_remote = 0;
+ foreach my $remote (@remotes) {
+ if ($remote eq $remote) {
+ $found_remote = 1;
+ last;
+ }
+ }
+ return $found_remote;
+}
+
+sub find_mediawiki_remotes {
+ my @remotes = git_cmd_try {
+ Git::command('remote'); }
+ "%s failed w/ code %d";
+ my $remote_url;
+ my @valid_remotes = ();
+ foreach my $remote (@remotes) {
+ $remote_url = mediawiki_remote_url_maybe($remote);
+ if ($remote_url) {
+ push(@valid_remotes, $remote);
+ }
+ }
+ return @valid_remotes;
+}
+
+sub find_upstream_remote_name {
+ my $current_branch = git_cmd_try {
+ Git::command_oneline('symbolic-ref', '--short', 'HEAD') }
+ "%s failed w/ code %d";
+ return Git::config("branch.${current_branch}.remote");
+}
+
+sub mediawiki_remote_url_maybe {
+ my $remote = shift;
+
+ # Find remote url
+ my $remote_url = Git::config("remote.${remote}.url");
+ if ($remote_url =~ s/mediawiki::(.*)/$1/) {
+ return url($remote_url)->canonical;
+ }
+
+ return;
+}
+
+sub get_template {
+ my $url = shift;
+ my $page_name = shift;
+ my ($req, $res, $code, $url_after);
+
+ $req = LWP::UserAgent->new;
+ if ($verbose) {
+ $req->show_progress(1);
+ }
+
+ $res = $req->get("${url}/index.php?title=${page_name}");
+ if (!$res->is_success) {
+ $code = $res->code;
+ $url_after = $res->request()->uri(); # resolve all redirections
+ if ($code == HTTP_CODE_PAGE_NOT_FOUND) {
+ if ($verbose) {
+ print {*STDERR} <<"WARNING";
+Warning: Failed to retrieve '$page_name'. Create it on the mediawiki if you want
+all the links to work properly.
+Trying to use the mediawiki homepage as a fallback template ...
+WARNING
+ }
+
+ # LWP automatically redirects GET request
+ $res = $req->get("${url}/index.php");
+ if (!$res->is_success) {
+ $url_after = $res->request()->uri(); # resolve all redirections
+ die "Failed to get homepage @ ${url_after} w/ code ${code}\n";
+ }
+ } else {
+ die "Failed to get '${page_name}' @ ${url_after} w/ code ${code}\n";
+ }
+ }
+
+ return $res->decoded_content;
+}
+
+############################## Help Functions ##################################
+
+sub help {
+ print {*STDOUT} <<'END';
+usage: git mw <command> <args>
+
+git mw commands are:
+ help Display help information about git mw
+ preview Parse and render local file into HTML
+END
+ exit;
+}
use strict;
use MediaWiki::API;
use Git;
+use Git::Mediawiki qw(clean_filename smudge_filename connect_maybe
+ EMPTY HTTP_CODE_OK);
use DateTime::Format::ISO8601;
use warnings;
use URI::Escape;
-# Mediawiki filenames can contain forward slashes. This variable decides by which pattern they should be replaced
-use constant SLASH_REPLACEMENT => '%2F';
-
# It's not always possible to delete pages (may require some
# privileges). Deleted pages are replaced with this content.
use constant DELETED_CONTENT => "[[Category:Deleted]]\n";
# Used on Git's side to reflect empty edit messages on the wiki
use constant EMPTY_MESSAGE => '*Empty MediaWiki Message*';
-use constant EMPTY => q{};
-
# Number of pages taken into account at once in submodule get_mw_page_list
use constant SLICE_SIZE => 50;
# the number of links to be returned (500 links max).
use constant BATCH_SIZE => 10;
-use constant HTTP_CODE_OK => 200;
-
if (@ARGV != 2) {
exit_error_usage();
}
# MediaWiki API instance, created lazily.
my $mediawiki;
-sub mw_connect_maybe {
- if ($mediawiki) {
- return;
- }
- $mediawiki = MediaWiki::API->new;
- $mediawiki->{config}->{api_url} = "${url}/api.php";
- if ($wiki_login) {
- my %credential = (
- 'url' => $url,
- 'username' => $wiki_login,
- 'password' => $wiki_passwd
- );
- Git::credential(\%credential);
- my $request = {lgname => $credential{username},
- lgpassword => $credential{password},
- lgdomain => $wiki_domain};
- if ($mediawiki->login($request)) {
- Git::credential(\%credential, 'approve');
- print {*STDERR} qq(Logged in mediawiki user "$credential{username}".\n);
- } else {
- print {*STDERR} qq(Failed to log in mediawiki user "$credential{username}" on ${url}\n);
- print {*STDERR} ' (error ' .
- $mediawiki->{error}->{code} . ': ' .
- $mediawiki->{error}->{details} . ")\n";
- Git::credential(\%credential, 'reject');
- exit 1;
- }
- }
- return;
-}
-
sub fatal_mw_error {
my $action = shift;
print STDERR "fatal: could not $action.\n";
# Get the list of pages to be fetched according to configuration.
sub get_mw_pages {
- mw_connect_maybe();
+ $mediawiki = connect_maybe($mediawiki, $remotename, $url);
print {*STDERR} "Listing pages on remote wiki...\n";
# avoid a loop onto all tracked pages. This is useful for the fetch-by-rev
# option.
sub get_last_global_remote_rev {
- mw_connect_maybe();
+ $mediawiki = connect_maybe($mediawiki, $remotename, $url);
my $query = {
action => 'query',
# Get the last remote revision concerning the tracked pages and the tracked
# categories.
sub get_last_remote_revision {
- mw_connect_maybe();
+ $mediawiki = connect_maybe($mediawiki, $remotename, $url);
my %pages_hash = get_mw_pages();
my @pages = values(%pages_hash);
return "${string}\n";
}
-sub mediawiki_clean_filename {
- my $filename = shift;
- $filename =~ s{@{[SLASH_REPLACEMENT]}}{/}g;
- # [, ], |, {, and } are forbidden by MediaWiki, even URL-encoded.
- # Do a variant of URL-encoding, i.e. looks like URL-encoding,
- # but with _ added to prevent MediaWiki from thinking this is
- # an actual special character.
- $filename =~ s/[\[\]\{\}\|]/sprintf("_%%_%x", ord($&))/ge;
- # If we use the uri escape before
- # we should unescape here, before anything
-
- return $filename;
-}
-
-sub mediawiki_smudge_filename {
- my $filename = shift;
- $filename =~ s{/}{@{[SLASH_REPLACEMENT]}}g;
- $filename =~ s/ /_/g;
- # Decode forbidden characters encoded in mediawiki_clean_filename
- $filename =~ s/_%_([0-9a-fA-F][0-9a-fA-F])/sprintf('%c', hex($1))/ge;
- return $filename;
-}
-
sub literal_data {
my ($content) = @_;
print {*STDOUT} 'data ', bytes::length($content), "\n", $content;
return;
}
- mw_connect_maybe();
+ $mediawiki = connect_maybe($mediawiki, $remotename, $url);
print {*STDERR} "Searching revisions...\n";
my $last_local = get_last_local_revision();
my %commit;
$commit{author} = $rev->{user} || 'Anonymous';
$commit{comment} = $rev->{comment} || EMPTY_MESSAGE;
- $commit{title} = mediawiki_smudge_filename($page_title);
+ $commit{title} = smudge_filename($page_title);
$commit{mw_revision} = $rev->{revid};
$commit{content} = mediawiki_smudge($rev->{'*'});
}
# Deleting and uploading a file requires a priviledged user
if ($file_deleted) {
- mw_connect_maybe();
+ $mediawiki = connect_maybe($mediawiki, $remotename, $url);
my $query = {
action => 'delete',
title => $path,
# Don't let perl try to interpret file content as UTF-8 => use "raw"
my $content = run_git("cat-file blob ${new_sha1}", 'raw');
if ($content ne EMPTY) {
- mw_connect_maybe();
+ $mediawiki = connect_maybe($mediawiki, $remotename, $url);
$mediawiki->{config}->{upload_url} =
"${url}/index.php/Special:Upload";
$mediawiki->edit({
my $old_sha1 = $diff_info_split[2];
my $page_created = ($old_sha1 eq NULL_SHA1);
my $page_deleted = ($new_sha1 eq NULL_SHA1);
- $complete_file_name = mediawiki_clean_filename($complete_file_name);
+ $complete_file_name = clean_filename($complete_file_name);
my ($title, $extension) = $complete_file_name =~ /^(.*)\.([^\.]*)$/;
if (!defined($extension)) {
$file_content = run_git("cat-file blob ${new_sha1}");
}
- mw_connect_maybe();
+ $mediawiki = connect_maybe($mediawiki, $remotename, $url);
my $result = $mediawiki->edit( {
action => 'edit',
}
sub get_allowed_file_extensions {
- mw_connect_maybe();
+ $mediawiki = connect_maybe($mediawiki, $remotename, $url);
my $query = {
action => 'query',
# Return MediaWiki id for a canonical namespace name.
# Ex.: "File", "Project".
sub get_mw_namespace_id {
- mw_connect_maybe();
+ $mediawiki = connect_maybe($mediawiki, $remotename, $url);
my $name = shift;
if (!exists $namespace_id{$name}) {
test_done
fi
- if [ ! -f "$GIT_BUILD_DIR"/git-remote-mediawiki ];
- then
- echo "No remote mediawiki for git found. Copying it in git"
- echo "cp $GIT_BUILD_DIR/contrib/mw-to-git/git-remote-mediawiki $GIT_BUILD_DIR/"
- ln -s "$GIT_BUILD_DIR"/contrib/mw-to-git/git-remote-mediawiki "$GIT_BUILD_DIR"
- fi
+ GIT_EXEC_PATH=$(cd "$(dirname "$0")" && cd "../.." && pwd)
+ PATH="$GIT_EXEC_PATH"'/bin-wrapper:'"$PATH"
if [ ! -d "$WIKI_DIR_INST/$WIKI_DIR_NAME" ];
then
doc: $(GIT_SUBTREE_DOC)
install: $(GIT_SUBTREE)
+ $(INSTALL) -d -m 755 $(DESTDIR)$(libexecdir)
$(INSTALL) -m 755 $(GIT_SUBTREE) $(DESTDIR)$(libexecdir)
install-doc: install-man
GIT_COMMITTER_NAME \
GIT_COMMITTER_EMAIL \
GIT_COMMITTER_DATE
- (echo -n "$annotate"; cat ) |
+ (printf "%s" "$annotate"; cat ) |
git commit-tree "$2" $3 # reads the rest of stdin
) || die "Can't copy commit $1"
}
name
You can omit the --squash flag, but doing so will increase the number
-of commits that are incldued in your local repository.
+of commits that are included in your local repository.
We now have a ~/git-extensions/git-subtree directory containing code
from the master branch of git://github.com/apenwarr/git-subtree.git
test_expect_success 'Check that prefix argument is required for split' '
echo "You must provide the --prefix option." > expected &&
test_must_fail git subtree split > actual 2>&1 &&
- test_debug "echo -n expected: " &&
+ test_debug "printf '"'"'expected: '"'"'" &&
test_debug "cat expected" &&
- test_debug "echo -n actual: " &&
+ test_debug "printf '"'"'actual: '"'"'" &&
test_debug "cat actual" &&
test_cmp expected actual &&
rm -f expected actual
test_expect_success 'Check that the <prefix> exists for a split' '
echo "'"'"'non-existent-directory'"'"'" does not exist\; use "'"'"'git subtree add'"'"'" > expected &&
test_must_fail git subtree split --prefix=non-existent-directory > actual 2>&1 &&
- test_debug "echo -n expected: " &&
+ test_debug "printf '"'"'expected: '"'"'" &&
test_debug "cat expected" &&
- test_debug "echo -n actual: " &&
+ test_debug "printf '"'"'actual: '"'"'" &&
test_debug "cat actual" &&
test_cmp expected actual
# rm -f expected actual
/*****************************************************************
*
- * Streaming converison support
+ * Streaming conversion support
*
*****************************************************************/
/*****************************************************************
*
- * Streaming converison support
+ * Streaming conversion support
*
*****************************************************************/
snprintf(portbuf, sizeof(portbuf), "REMOTE_PORT=%d",
ntohs(sin_addr->sin_port));
#ifndef NO_IPV6
- } else if (addr && addr->sa_family == AF_INET6) {
+ } else if (addr->sa_family == AF_INET6) {
struct sockaddr_in6 *sin6_addr = (void *) addr;
char *buf = addrbuf + 12;
}
}
-/* if any standard file descriptor is missing open it to /dev/null */
-static void sanitize_stdfds(void)
-{
- int fd = open("/dev/null", O_RDWR, 0);
- while (fd != -1 && fd < 2)
- fd = dup(fd);
- if (fd == -1)
- die_errno("open /dev/null or dup failed");
- if (fd > 2)
- close(fd);
-}
-
#ifdef NO_POSIX_GOODIES
struct credentials;
del = deleted;
if (graph_width <= max_change) {
- int total = add + del;
-
- total = scale_linear(add + del, graph_width, max_change);
+ int total = scale_linear(add + del, graph_width, max_change);
if (total < 2 && add && del)
/* width >= 2 due to the sanity check */
total = 2;
*/
static int reuse_worktree_file(const char *name, const unsigned char *sha1, int want_file)
{
- struct cache_entry *ce;
+ const struct cache_entry *ce;
struct stat st;
int pos, len;
return 1;
}
+static void enable_patch_output(int *fmt) {
+ *fmt &= ~DIFF_FORMAT_NO_OUTPUT;
+ *fmt |= DIFF_FORMAT_PATCH;
+}
+
int diff_opt_parse(struct diff_options *options, const char **av, int ac)
{
const char *arg = av[0];
int argcount;
/* Output format options */
- if (!strcmp(arg, "-p") || !strcmp(arg, "-u") || !strcmp(arg, "--patch"))
- options->output_format |= DIFF_FORMAT_PATCH;
- else if (opt_arg(arg, 'U', "unified", &options->context))
- options->output_format |= DIFF_FORMAT_PATCH;
+ if (!strcmp(arg, "-p") || !strcmp(arg, "-u") || !strcmp(arg, "--patch")
+ || opt_arg(arg, 'U', "unified", &options->context))
+ enable_patch_output(&options->output_format);
else if (!strcmp(arg, "--raw"))
options->output_format |= DIFF_FORMAT_RAW;
- else if (!strcmp(arg, "--patch-with-raw"))
- options->output_format |= DIFF_FORMAT_PATCH | DIFF_FORMAT_RAW;
- else if (!strcmp(arg, "--numstat"))
+ else if (!strcmp(arg, "--patch-with-raw")) {
+ enable_patch_output(&options->output_format);
+ options->output_format |= DIFF_FORMAT_RAW;
+ } else if (!strcmp(arg, "--numstat"))
options->output_format |= DIFF_FORMAT_NUMSTAT;
else if (!strcmp(arg, "--shortstat"))
options->output_format |= DIFF_FORMAT_SHORTSTAT;
options->output_format |= DIFF_FORMAT_CHECKDIFF;
else if (!strcmp(arg, "--summary"))
options->output_format |= DIFF_FORMAT_SUMMARY;
- else if (!strcmp(arg, "--patch-with-stat"))
- options->output_format |= DIFF_FORMAT_PATCH | DIFF_FORMAT_DIFFSTAT;
- else if (!strcmp(arg, "--name-only"))
+ else if (!strcmp(arg, "--patch-with-stat")) {
+ enable_patch_output(&options->output_format);
+ options->output_format |= DIFF_FORMAT_DIFFSTAT;
+ } else if (!strcmp(arg, "--name-only"))
options->output_format |= DIFF_FORMAT_NAME;
else if (!strcmp(arg, "--name-status"))
options->output_format |= DIFF_FORMAT_NAME_STATUS;
- else if (!strcmp(arg, "-s"))
+ else if (!strcmp(arg, "-s") || !strcmp(arg, "--no-patch"))
options->output_format |= DIFF_FORMAT_NO_OUTPUT;
else if (!prefixcmp(arg, "--stat"))
/* --stat, --stat-width, --stat-name-width, or --stat-count */
/* flags options */
else if (!strcmp(arg, "--binary")) {
- options->output_format |= DIFF_FORMAT_PATCH;
+ enable_patch_output(&options->output_format);
DIFF_OPT_SET(options, BINARY);
}
else if (!strcmp(arg, "--full-index"))
DIFF_OPT_TST(options, DIFF_FROM_CONTENTS)) {
/*
* run diff_flush_patch for the exit status. setting
- * options->file to /dev/null should be safe, becaue we
+ * options->file to /dev/null should be safe, because we
* aren't supposed to produce any output anyway.
*/
if (options->close_file)
return;
}
-static unsigned int contains(mmfile_t *mf, struct diff_options *o,
- regex_t *regexp, kwset_t kws)
+static unsigned int contains(mmfile_t *mf, regex_t *regexp, kwset_t kws)
{
unsigned int cnt;
unsigned long sz;
struct diff_options *o,
regex_t *regexp, kwset_t kws)
{
- if (!one)
- return contains(two, o, regexp, kws) != 0;
- if (!two)
- return contains(one, o, regexp, kws) != 0;
- return contains(one, o, regexp, kws) != contains(two, o, regexp, kws);
+ unsigned int one_contains = one ? contains(one, regexp, kws) : 0;
+ unsigned int two_contains = two ? contains(two, regexp, kws) : 0;
+ return one_contains != two_contains;
}
static int pickaxe_match(struct diff_filepair *p, struct diff_options *o,
*/
static enum exist_status directory_exists_in_index_icase(const char *dirname, int len)
{
- struct cache_entry *ce = index_name_exists(&the_index, dirname, len + 1, ignore_case);
+ const struct cache_entry *ce = index_name_exists(&the_index, dirname, len + 1, ignore_case);
unsigned char endchar;
if (!ce)
if (pos < 0)
pos = -pos-1;
while (pos < active_nr) {
- struct cache_entry *ce = active_cache[pos++];
+ const struct cache_entry *ce = active_cache[pos++];
unsigned char endchar;
if (strncmp(ce->name, dirname, len))
static int get_index_dtype(const char *path, int len)
{
int pos;
- struct cache_entry *ce;
+ const struct cache_entry *ce;
ce = cache_name_exists(path, len, 0);
if (ce) {
return open(path, O_WRONLY | O_CREAT | O_EXCL, mode);
}
-static void *read_blob_entry(struct cache_entry *ce, unsigned long *size)
+static void *read_blob_entry(const struct cache_entry *ce, unsigned long *size)
{
enum object_type type;
void *new = read_sha1_file(ce->sha1, &type, size);
return NULL;
}
-static int open_output_fd(char *path, struct cache_entry *ce, int to_tempfile)
+static int open_output_fd(char *path, const struct cache_entry *ce, int to_tempfile)
{
int symlink = (ce->ce_mode & S_IFMT) != S_IFREG;
if (to_tempfile) {
return 0;
}
-static int streaming_write_entry(struct cache_entry *ce, char *path,
+static int streaming_write_entry(const struct cache_entry *ce, char *path,
struct stream_filter *filter,
const struct checkout *state, int to_tempfile,
int *fstat_done, struct stat *statbuf)
return result;
}
-static int write_entry(struct cache_entry *ce, char *path, const struct checkout *state, int to_tempfile)
+static int write_entry(struct cache_entry *ce,
+ char *path, const struct checkout *state, int to_tempfile)
{
unsigned int ce_mode_s_ifmt = ce->ce_mode & S_IFMT;
int fd, ret, fstat_done = 0;
break;
case S_IFGITLINK:
if (to_tempfile)
- return error("cannot create temporary subproject %s", path);
+ return error("cannot create temporary submodule %s", path);
if (mkdir(path, 0777) < 0)
- return error("cannot create subproject directory %s", path);
+ return error("cannot create submodule directory %s", path);
break;
default:
return error("unknown file mode for %s in index", path);
return lstat(path, st);
}
-int checkout_entry(struct cache_entry *ce, const struct checkout *state, char *topath)
+int checkout_entry(struct cache_entry *ce,
+ const struct checkout *state, char *topath)
{
static char path[PATH_MAX + 1];
struct stat st;
int is_bare_repository_cfg = -1; /* unspecified */
int log_all_ref_updates = -1; /* unspecified */
int warn_ambiguous_refs = 1;
+int warn_on_object_refname_ambiguity = 1;
int repository_format_version;
const char *git_commit_encoding;
const char *git_log_output_encoding;
extern void setup_path(void);
extern const char **prepare_git_cmd(const char **argv);
extern int execv_git_cmd(const char **argv); /* NULL terminated */
+LAST_ARG_MUST_BE_NULL
extern int execl_git_cmd(const char *cmd, ...);
extern const char *system_path(const char *path);
#include "run-command.h"
#include "transport.h"
#include "version.h"
+#include "prio-queue.h"
static int transfer_unpack_limit = -1;
static int fetch_unpack_limit = -1;
*/
#define MAX_IN_VAIN 256
-static struct commit_list *rev_list;
+static struct prio_queue rev_list = { compare_commits_by_commit_date };
static int non_common_revs, multi_ack, use_sideband, allow_tip_sha1_in_want;
static void rev_list_push(struct commit *commit, int mark)
if (parse_commit(commit))
return;
- commit_list_insert_by_date(commit, &rev_list);
+ prio_queue_put(&rev_list, commit);
if (!(commit->object.flags & COMMON))
non_common_revs++;
unsigned int mark;
struct commit_list *parents;
- if (rev_list == NULL || non_common_revs == 0)
+ if (rev_list.nr == 0 || non_common_revs == 0)
return NULL;
- commit = rev_list->item;
+ commit = prio_queue_get(&rev_list);
if (!commit->object.parsed)
parse_commit(commit);
parents = commit->parents;
mark_common(parents->item, 1, 0);
parents = parents->next;
}
-
- rev_list = rev_list->next;
}
return commit->object.sha1;
in_vain = 0;
got_continue = 1;
if (ack == ACK_ready) {
- rev_list = NULL;
+ clear_prio_queue(&rev_list);
got_ready = 1;
}
break;
struct commit *commit = (struct commit *)o;
if (!(commit->object.flags & COMPLETE)) {
commit->object.flags |= COMPLETE;
- commit_list_insert_by_date(commit, &complete);
+ commit_list_insert(commit, &complete);
}
}
return 0;
if (!args->depth) {
for_each_ref(mark_complete, NULL);
for_each_alternate_ref(mark_alternate_complete, NULL);
+ commit_list_sort_by_date(&complete);
if (cutoff)
mark_recent_complete_commits(args, cutoff);
}
#include <poll.h>
#endif
-extern int get_st_mode_bits(const char *path, int *mode);
-
#if defined(__MINGW32__)
/* pull in Windows compatibility stuff */
#include "compat/mingw.h"
#undef _XOPEN_SOURCE
#include <grp.h>
#define _XOPEN_SOURCE 600
-#include "compat/cygwin.h"
#else
#undef _ALL_SOURCE /* AIX 5.3L defines a struct list with _ALL_SOURCE. */
#include <grp.h>
#endif
#endif
+/* The sentinel attribute is valid from gcc version 4.0 */
+#if defined(__GNUC__) && (__GNUC__ >= 4)
+#define LAST_ARG_MUST_BE_NULL __attribute__((sentinel))
+#else
+#define LAST_ARG_MUST_BE_NULL
+#endif
+
#include "compat/bswap.h"
#ifdef USE_WILDMATCH
setup_tool () {
tool="$1"
- # Fallback definitions, to be overriden by tools.
+ # Fallback definitions, to be overridden by tools.
can_merge () {
return 0
}
missingGitTags = gitTags - p4Labels
self.exportGitTags(missingGitTags)
- # exit with error unless everything applied perfecly
+ # exit with error unless everything applied perfectly
if len(commits) != len(applied):
sys.exit(1)
# Fetch one or more remote refs and merge it/them into the current HEAD.
USAGE='[-n | --no-stat] [--[no-]commit] [--[no-]squash] [--[no-]ff] [-s strategy]... [<fetch-options>] <repo> <head>...'
-LONG_USAGE='Fetch one or more remote refs and merge it/them into the current HEAD.'
+LONG_USAGE='Fetch one or more remote refs and integrate it/them with the current HEAD.'
SUBDIRECTORY_OK=Yes
OPTIONS_SPEC=
. git-sh-setup
if test ! -z "$switch_to"
then
+ GIT_REFLOG_ACTION="$GIT_REFLOG_ACTION: checkout $switch_to"
output git checkout "$switch_to" -- ||
- die "Could not checkout $switch_to"
+ die "Could not checkout $switch_to"
+
+ comment_for_reflog start
fi
orig_head=$(git rev-parse --verify HEAD) || die "No HEAD?"
test -d "$rewritten" || test -n "$force_rebase" || skip_unnecessary_picks
+GIT_REFLOG_ACTION="$GIT_REFLOG_ACTION: checkout $onto_name"
output git checkout $onto || die_abort "could not detach HEAD"
git update-ref ORIG_HEAD $orig_head
do_rest
die "$(eval_gettext "Cannot store \$stash_sha1")"
gettext 'Applying autostash resulted in conflicts.
Your changes are safe in the stash.
-You can run "git stash pop" or "git stash drop" it at any time.
+You can run "git stash pop" or "git stash drop" at any time.
'
fi
fi
if test -z "$force_rebase"
then
# Lazily switch to the target branch if needed...
- test -z "$switch_to" || git checkout "$switch_to" --
+ test -z "$switch_to" ||
+ GIT_REFLOG_ACTION="$GIT_REFLOG_ACTION: checkout $switch_to" \
+ git checkout "$switch_to" --
say "$(eval_gettext "Current branch \$branch_name is up to date.")"
finish_rebase
exit 0
# Detach HEAD and reset the tree
say "$(gettext "First, rewinding head to replay your work on top of it...")"
-git checkout -q "$onto^0" || die "could not detach HEAD"
+
+GIT_REFLOG_ACTION="$GIT_REFLOG_ACTION: checkout $onto_name" \
+ git checkout -q "$onto^0" || die "could not detach HEAD"
git update-ref ORIG_HEAD $orig_head
# If the $onto is a proper descendant of the tip of the branch, then
tag_name=$(git describe --exact "$head^0" 2>/dev/null)
test -n "$base" && test -n "$url" || usage
-baserev=$(git rev-parse --verify "$base"^0) &&
-headrev=$(git rev-parse --verify "$head"^0) || exit
+
+baserev=$(git rev-parse --verify --quiet "$base"^0)
+if test -z "$baserev"
+then
+ die "fatal: Not a valid revision: $base"
+fi
+
+headrev=$(git rev-parse --verify --quiet "$head"^0)
+if test -z "$headrev"
+then
+ die "fatal: Not a valid revision: $head"
+fi
merge_base=$(git merge-base $baserev $headrev) ||
die "fatal: No commits in common between $base and $head"
--smtp-pass <str> * Password for SMTP-AUTH; not necessary.
--smtp-encryption <str> * tls or ssl; anything else disables.
--smtp-ssl * Deprecated. Use '--smtp-encryption ssl'.
+ --smtp-ssl-cert-path <str> * Path to ca-certificates (either directory or file).
+ Pass an empty string to disable certificate
+ verification.
--smtp-domain <str> * The domain name sent to HELO/EHLO handshake
--smtp-debug <0|1> * Disable, enable Net::SMTP debug.
my ($thread, $chain_reply_to, $suppress_from, $signed_off_by_cc);
my ($to_cmd, $cc_cmd);
my ($smtp_server, $smtp_server_port, @smtp_server_options);
-my ($smtp_authuser, $smtp_encryption);
+my ($smtp_authuser, $smtp_encryption, $smtp_ssl_cert_path);
my ($identity, $aliasfiletype, @alias_files, $smtp_domain);
my ($validate, $confirm);
my (@suppress_cc);
"smtpserveroption" => \@smtp_server_options,
"smtpuser" => \$smtp_authuser,
"smtppass" => \$smtp_authpass,
+ "smtpsslcertpath" => \$smtp_ssl_cert_path,
"smtpdomain" => \$smtp_domain,
"to" => \@initial_to,
"tocmd" => \$to_cmd,
"smtp-pass:s" => \$smtp_authpass,
"smtp-ssl" => sub { $smtp_encryption = 'ssl' },
"smtp-encryption=s" => \$smtp_encryption,
+ "smtp-ssl-cert-path" => \$smtp_ssl_cert_path,
"smtp-debug:i" => \$debug_net_smtp,
"smtp-domain:s" => \$smtp_domain,
"identity=s" => \$identity,
return $auth;
}
+sub ssl_verify_params {
+ eval {
+ require IO::Socket::SSL;
+ IO::Socket::SSL->import(qw/SSL_VERIFY_PEER SSL_VERIFY_NONE/);
+ };
+ if ($@) {
+ print STDERR "Not using SSL_VERIFY_PEER due to out-of-date IO::Socket::SSL.\n";
+ return;
+ }
+
+ if (!defined $smtp_ssl_cert_path) {
+ $smtp_ssl_cert_path = "/etc/ssl/certs";
+ }
+
+ if ($smtp_ssl_cert_path eq "") {
+ return (SSL_verify_mode => SSL_VERIFY_NONE());
+ } elsif (-d $smtp_ssl_cert_path) {
+ return (SSL_verify_mode => SSL_VERIFY_PEER(),
+ SSL_ca_path => $smtp_ssl_cert_path);
+ } elsif (-f $smtp_ssl_cert_path) {
+ return (SSL_verify_mode => SSL_VERIFY_PEER(),
+ SSL_ca_file => $smtp_ssl_cert_path);
+ } else {
+ print STDERR "Not using SSL_VERIFY_PEER because the CA path does not exist.\n";
+ return (SSL_verify_mode => SSL_VERIFY_NONE());
+ }
+}
+
# Returns 1 if the message was sent, and 0 otherwise.
# In actuality, the whole program dies when there
# is an error sending a message.
$smtp_domain ||= maildomain();
$smtp ||= Net::SMTP::SSL->new($smtp_server,
Hello => $smtp_domain,
- Port => $smtp_server_port);
+ Port => $smtp_server_port,
+ ssl_verify_params());
}
else {
require Net::SMTP;
$smtp_domain ||= maildomain();
- $smtp ||= Net::SMTP->new(smtp_host_string(),
+ $smtp_server_port ||= 25;
+ $smtp ||= Net::SMTP->new($smtp_server,
Hello => $smtp_domain,
- Debug => $debug_net_smtp);
+ Debug => $debug_net_smtp,
+ Port => $smtp_server_port);
if ($smtp_encryption eq 'tls' && $smtp) {
require Net::SMTP::SSL;
$smtp->command('STARTTLS');
$smtp->response();
if ($smtp->code == 220) {
- $smtp = Net::SMTP::SSL->start_SSL($smtp)
+ $smtp = Net::SMTP::SSL->start_SSL($smtp,
+ ssl_verify_params())
or die "STARTTLS failed! ".$smtp->message;
$smtp_encryption = '';
# Send EHLO again to receive fresh
update=
prefix=
custom_name=
+depth=
# The function takes at most 2 arguments. The first argument is the
# URL that navigates to the submodule origin repo. When relative, this URL
name=$2
url=$3
reference="$4"
+ depth="$5"
quiet=
if test -n "$GIT_QUIET"
then
mkdir -p "$gitdir_base"
(
clear_local_git_env
- git clone $quiet -n ${reference:+"$reference"} \
+ git clone $quiet ${depth:+"$depth"} -n ${reference:+"$reference"} \
--separate-git-dir "$gitdir" "$url" "$sm_path"
) ||
die "$(eval_gettext "Clone of '\$url' into submodule path '\$sm_path' failed")"
custom_name=$2
shift
;;
+ --depth)
+ case "$2" in '') usage ;; esac
+ depth="--depth=$2"
+ shift
+ ;;
+ --depth=*)
+ depth=$1
+ ;;
--)
shift
break
echo "$(eval_gettext "Reactivating local git directory for submodule '\$sm_name'.")"
fi
fi
- module_clone "$sm_path" "$sm_name" "$realrepo" "$reference" || exit
+ module_clone "$sm_path" "$sm_name" "$realrepo" "$reference" "$depth" || exit
(
clear_local_git_env
cd "$sm_path" &&
--checkout)
update="checkout"
;;
+ --depth)
+ case "$2" in '') usage ;; esac
+ depth="--depth=$2"
+ shift
+ ;;
+ --depth=*)
+ depth=$1
+ ;;
--)
shift
break
if ! test -d "$sm_path"/.git -o -f "$sm_path"/.git
then
- module_clone "$sm_path" "$name" "$url" "$reference" || exit
+ module_clone "$sm_path" "$name" "$url" "$reference" "$depth" || exit
cloned_modules="$cloned_modules;$name"
subsha1=
else
say_msg="$(eval_gettext "Submodule path '\$displaypath': merged in '\$sha1'")"
must_die_on_failure=yes
;;
+ !*)
+ command="${update_module#!}"
+ die_msg="$(eval_gettext "Execution of '\$command \$sha1' failed in submodule path '\$prefix\$sm_path'")"
+ say_msg="$(eval_gettext "Submodule path '\$prefix\$sm_path': '\$command \$sha1'")"
+ must_die_on_failure=yes
+ ;;
*)
command="git checkout $subforce -q"
die_msg="$(eval_gettext "Unable to checkout '\$sha1' in submodule path '\$displaypath'")"
{ "cat-file", cmd_cat_file, RUN_SETUP },
{ "check-attr", cmd_check_attr, RUN_SETUP },
{ "check-ignore", cmd_check_ignore, RUN_SETUP | NEED_WORK_TREE },
+ { "check-mailmap", cmd_check_mailmap, RUN_SETUP },
{ "check-ref-format", cmd_check_ref_format },
{ "checkout", cmd_checkout, RUN_SETUP | NEED_WORK_TREE },
{ "checkout-index", cmd_checkout_index,
if (!cmd)
cmd = "git-help";
+ /*
+ * Always open file descriptors 0/1/2 to avoid clobbering files
+ * in die(). It also avoids messing up when the pipes are dup'ed
+ * onto stdin/stdout/stderr in the child processes we spawn.
+ */
+ sanitize_stdfds();
+
git_setup_gettext();
/*
# string of the home link on top of all pages
our $home_link_str = "++GITWEB_HOME_LINK_STR++";
+# extra breadcrumbs preceding the home link
+our @extra_breadcrumbs = ();
+
# name of your site or organization to appear in page titles
# replace this with something more descriptive for clearer bookmarks
our $site_name = "++GITWEB_SITENAME++"
sub print_nav_breadcrumbs {
my %opts = @_;
- print $cgi->a({-href => esc_url($home_link)}, $home_link_str) . " / ";
+ for my $crumb (@extra_breadcrumbs, [ $home_link_str => $home_link ]) {
+ print $cgi->a({-href => esc_url($crumb->[1])}, $crumb->[0]) . " / ";
+ }
if (defined $project) {
my @dirname = split '/', $project;
my $projectbasename = pop @dirname;
!S_ISREG(st.st_mode))
return 0;
-#if defined(GIT_WINDOWS_NATIVE) || defined(__CYGWIN__)
-#if defined(__CYGWIN__)
-if ((st.st_mode & S_IXUSR) == 0)
-#endif
+#if defined(GIT_WINDOWS_NATIVE)
{ /* cannot trust the executable bit, peek into the file instead */
char buf[3] = { 0 };
int n;
static int add_send_request(struct object *obj, struct remote_lock *lock)
{
- struct transfer_request *request = request_queue_head;
+ struct transfer_request *request;
struct packed_git *target;
/* Keep locks active */
struct trie *fail; /* Aho-Corasick failure function. */
int depth; /* Depth of this node from the root. */
int shift; /* Shift function for search failures. */
- int maxshift; /* Max shift of self and descendents. */
+ int maxshift; /* Max shift of self and descendants. */
};
/* Structure returned opaquely to the caller, containing everything. */
treefails(tree->rlink, fail, recourse);
/* Find, in the chain of fails going back to the root, the first
- node that has a descendent on the current label. */
+ node that has a descendant on the current label. */
while (fail)
{
link = fail->links;
computing the delta table, failure function, and shift function. */
for (curr = last = kwset->trie; curr; curr = curr->next)
{
- /* Enqueue the immediate descendents in the level order queue. */
+ /* Enqueue the immediate descendants in the level order queue. */
enqueue(curr->links, &last);
curr->shift = kwset->mind;
curr->maxshift = kwset->mind;
- /* Update the delta table for the descendents of this node. */
+ /* Update the delta table for the descendants of this node. */
treedelta(curr->links, curr->depth, delta);
/* Compute the failure function for the descendants of this node. */
fail->shift = curr->depth - fail->depth;
/* If the current node is accepting then the shift at the
- fail and its descendents should be no larger than the
+ fail and its descendants should be no larger than the
difference of their depths. */
if (curr->accepting && fail->maxshift > curr->depth - fail->depth)
fail->maxshift = curr->depth - fail->depth;
static void sort_and_merge_range_set(struct range_set *rs)
{
int i;
- int o = 1; /* output cursor */
+ int o = 0; /* output cursor */
qsort(rs->ranges, rs->nr, sizeof(struct range), range_cmp);
- for (i = 1; i < rs->nr; i++) {
- if (rs->ranges[i].start <= rs->ranges[o-1].end) {
- rs->ranges[o-1].end = rs->ranges[i].end;
+ for (i = 0; i < rs->nr; i++) {
+ if (rs->ranges[i].start == rs->ranges[i].end)
+ continue;
+ if (o > 0 && rs->ranges[i].start <= rs->ranges[o-1].end) {
+ if (rs->ranges[o-1].end < rs->ranges[i].end)
+ rs->ranges[o-1].end = rs->ranges[i].end;
} else {
rs->ranges[o].start = rs->ranges[i].start;
rs->ranges[o].end = rs->ranges[i].end;
p = xcalloc(1, sizeof(struct line_log_data));
p->path = path;
range_set_append(&p->ranges, begin, end);
+ sort_and_merge_range_set(&p->ranges);
if (ip) {
p->next = ip->next;
ip->next = p;
void *cb_data, long lines, long *begin, long *end,
const char *path)
{
+ *begin = *end = 0;
+
if (*arg == ':') {
arg = parse_range_funcname(arg, nth_line_cb, cb_data, lines, begin, end, path);
if (!arg || *arg)
if (*arg)
return -1;
+ if (*begin && *end && *end < *begin) {
+ long tmp;
+ tmp = *end; *end = *begin; *begin = tmp;
+ }
+
return 0;
}
ctx.fmt = opt->commit_format;
ctx.mailmap = opt->mailmap;
ctx.color = opt->diffopt.use_color;
+ ctx.output_encoding = get_log_output_encoding();
+ if (opt->from_ident.mail_begin && opt->from_ident.name_begin)
+ ctx.from_ident = &opt->from_ident;
pretty_print_commit(&ctx, commit, &msgbuf);
if (opt->add_signoff)
#define DEBUG_MAILMAP 0
#if DEBUG_MAILMAP
#define debug_mm(...) fprintf(stderr, __VA_ARGS__)
+#define debug_str(X) ((X) ? (X) : "(none)")
#else
static inline void debug_mm(const char *format, ...) {}
+static inline const char *debug_str(const char *s) { return s; }
#endif
const char *git_mailmap_file;
static void free_mailmap_info(void *p, const char *s)
{
struct mailmap_info *mi = (struct mailmap_info *)p;
- debug_mm("mailmap: -- complex: '%s' -> '%s' <%s>\n", s, mi->name, mi->email);
+ debug_mm("mailmap: -- complex: '%s' -> '%s' <%s>\n",
+ s, debug_str(mi->name), debug_str(mi->email));
free(mi->name);
free(mi->email);
}
static void free_mailmap_entry(void *p, const char *s)
{
struct mailmap_entry *me = (struct mailmap_entry *)p;
- debug_mm("mailmap: removing entries for <%s>, with %d sub-entries\n", s, me->namemap.nr);
- debug_mm("mailmap: - simple: '%s' <%s>\n", me->name, me->email);
+ debug_mm("mailmap: removing entries for <%s>, with %d sub-entries\n",
+ s, me->namemap.nr);
+ debug_mm("mailmap: - simple: '%s' <%s>\n",
+ debug_str(me->name), debug_str(me->email));
+
free(me->name);
free(me->email);
}
static void add_mapping(struct string_list *map,
- char *new_name, char *new_email, char *old_name, char *old_email)
+ char *new_name, char *new_email,
+ char *old_name, char *old_email)
{
struct mailmap_entry *me;
int index;
- char *p;
-
- if (old_email)
- for (p = old_email; *p; p++)
- *p = tolower(*p);
- if (new_email)
- for (p = new_email; *p; p++)
- *p = tolower(*p);
if (old_email == NULL) {
old_email = new_email;
if ((index = string_list_find_insert_index(map, old_email, 1)) < 0) {
/* mailmap entry exists, invert index value */
index = -1 - index;
+ me = (struct mailmap_entry *)map->items[index].util;
} else {
/* create mailmap entry */
- struct string_list_item *item = string_list_insert_at_index(map, index, old_email);
- item->util = xcalloc(1, sizeof(struct mailmap_entry));
- ((struct mailmap_entry *)item->util)->namemap.strdup_strings = 1;
+ struct string_list_item *item;
+
+ item = string_list_insert_at_index(map, index, old_email);
+ me = xcalloc(1, sizeof(struct mailmap_entry));
+ me->namemap.strdup_strings = 1;
+ me->namemap.cmp = strcasecmp;
+ item->util = me;
}
- me = (struct mailmap_entry *)map->items[index].util;
if (old_name == NULL) {
- debug_mm("mailmap: adding (simple) entry for %s at index %d\n", old_email, index);
+ debug_mm("mailmap: adding (simple) entry for %s at index %d\n",
+ old_email, index);
/* Replace current name and new email for simple entry */
if (new_name) {
free(me->name);
}
} else {
struct mailmap_info *mi = xcalloc(1, sizeof(struct mailmap_info));
- debug_mm("mailmap: adding (complex) entry for %s at index %d\n", old_email, index);
+ debug_mm("mailmap: adding (complex) entry for %s at index %d\n",
+ old_email, index);
if (new_name)
mi->name = xstrdup(new_name);
if (new_email)
}
debug_mm("mailmap: '%s' <%s> -> '%s' <%s>\n",
- old_name, old_email, new_name, new_email);
+ debug_str(old_name), old_email,
+ debug_str(new_name), debug_str(new_email));
}
static char *parse_name_and_email(char *buffer, char **name,
- char **email, int allow_empty_email)
+ char **email, int allow_empty_email)
{
char *left, *right, *nstart, *nend;
*name = *email = NULL;
while (nend > nstart && isspace(*nend))
--nend;
- *name = (nstart < nend ? nstart : NULL);
+ *name = (nstart <= nend ? nstart : NULL);
*email = left+1;
*(nend+1) = '\0';
*right++ = '\0';
}
int map_user(struct string_list *map,
- const char **email, size_t *emaillen,
- const char **name, size_t *namelen)
+ const char **email, size_t *emaillen,
+ const char **name, size_t *namelen)
{
struct string_list_item *item;
struct mailmap_entry *me;
debug_mm("map_user: map '%.*s' <%.*s>\n",
- *name, *namelen, *emaillen, *email);
+ (int)*namelen, debug_str(*name),
+ (int)*emaillen, debug_str(*email));
item = lookup_prefix(map, *email, *emaillen);
if (item != NULL) {
me = (struct mailmap_entry *)item->util;
if (me->namemap.nr) {
- /* The item has multiple items, so we'll look up on name too */
- /* If the name is not found, we choose the simple entry */
+ /*
+ * The item has multiple items, so we'll look up on
+ * name too. If the name is not found, we choose the
+ * simple entry.
+ */
struct string_list_item *subitem;
subitem = lookup_prefix(&me->namemap, *name, *namelen);
if (subitem)
*name = mi->name;
*namelen = strlen(*name);
}
- debug_mm("map_user: to '%.*s' <.*%s>\n", *namelen, *name,
- *emaillen, *email);
+ debug_mm("map_user: to '%.*s' <%.*s>\n",
+ (int)*namelen, debug_str(*name),
+ (int)*emaillen, debug_str(*email));
return 1;
}
debug_mm("map_user: --\n");
int i;
fprintf(stderr, "BUG: There are unmerged index entries:\n");
for (i = 0; i < active_nr; i++) {
- struct cache_entry *ce = active_cache[i];
+ const struct cache_entry *ce = active_cache[i];
if (ce_stage(ce))
fprintf(stderr, "BUG: %d %.*s\n", ce_stage(ce),
(int)ce_namelen(ce), ce->name);
if (!cache_tree_fully_valid(active_cache_tree) &&
cache_tree_update(active_cache_tree,
- active_cache, active_nr, 0) < 0)
+ (const struct cache_entry * const *)active_cache,
+ active_nr, 0) < 0)
die(_("error building trees"));
result = lookup_tree(active_cache_tree->sha1);
for (i = 0; i < active_nr; i++) {
struct string_list_item *item;
struct stage_data *e;
- struct cache_entry *ce = active_cache[i];
+ const struct cache_entry *ce = active_cache[i];
if (!ce_stage(ce))
continue;
* variable is used, and if that is missing, the default notes ref is used
* ("refs/notes/commits").
*
- * If you need to re-intialize a notes_tree structure (e.g. when switching from
+ * If you need to re-initialize a notes_tree structure (e.g. when switching from
* one notes ref to another), you must first de-initialize the notes_tree
* structure by calling free_notes(struct notes_tree *).
*
struct object *parse_object_buffer(const unsigned char *sha1, enum object_type type, unsigned long size, void *buffer, int *eaten_p)
{
struct object *obj;
- int eaten = 0;
+ *eaten_p = 0;
obj = NULL;
if (type == OBJ_BLOB) {
if (!tree->object.parsed) {
if (parse_tree_buffer(tree, buffer, size))
return NULL;
- eaten = 1;
+ *eaten_p = 1;
}
}
} else if (type == OBJ_COMMIT) {
return NULL;
if (!commit->buffer) {
commit->buffer = buffer;
- eaten = 1;
+ *eaten_p = 1;
}
obj = &commit->object;
}
}
if (obj && obj->type == OBJ_NONE)
obj->type = type;
- *eaten_p = eaten;
return obj;
}
/* revindex elements are lazily initialized */
}
-static int cmp_offset(const void *a_, const void *b_)
+/*
+ * This is a least-significant-digit radix sort.
+ *
+ * It sorts each of the "n" items in "entries" by its offset field. The "max"
+ * parameter must be at least as large as the largest offset in the array,
+ * and lets us quit the sort early.
+ */
+static void sort_revindex(struct revindex_entry *entries, unsigned n, off_t max)
{
- const struct revindex_entry *a = a_;
- const struct revindex_entry *b = b_;
- return (a->offset < b->offset) ? -1 : (a->offset > b->offset) ? 1 : 0;
+ /*
+ * We use a "digit" size of 16 bits. That keeps our memory
+ * usage reasonable, and we can generally (for a 4G or smaller
+ * packfile) quit after two rounds of radix-sorting.
+ */
+#define DIGIT_SIZE (16)
+#define BUCKETS (1 << DIGIT_SIZE)
+ /*
+ * We want to know the bucket that a[i] will go into when we are using
+ * the digit that is N bits from the (least significant) end.
+ */
+#define BUCKET_FOR(a, i, bits) (((a)[(i)].offset >> (bits)) & (BUCKETS-1))
+
+ /*
+ * We need O(n) temporary storage. Rather than do an extra copy of the
+ * partial results into "entries", we sort back and forth between the
+ * real array and temporary storage. In each iteration of the loop, we
+ * keep track of them with alias pointers, always sorting from "from"
+ * to "to".
+ */
+ struct revindex_entry *tmp = xmalloc(n * sizeof(*tmp));
+ struct revindex_entry *from = entries, *to = tmp;
+ int bits;
+ unsigned *pos = xmalloc(BUCKETS * sizeof(*pos));
+
+ /*
+ * If (max >> bits) is zero, then we know that the radix digit we are
+ * on (and any higher) will be zero for all entries, and our loop will
+ * be a no-op, as everybody lands in the same zero-th bucket.
+ */
+ for (bits = 0; max >> bits; bits += DIGIT_SIZE) {
+ struct revindex_entry *swap;
+ unsigned i;
+
+ memset(pos, 0, BUCKETS * sizeof(*pos));
+
+ /*
+ * We want pos[i] to store the index of the last element that
+ * will go in bucket "i" (actually one past the last element).
+ * To do this, we first count the items that will go in each
+ * bucket, which gives us a relative offset from the last
+ * bucket. We can then cumulatively add the index from the
+ * previous bucket to get the true index.
+ */
+ for (i = 0; i < n; i++)
+ pos[BUCKET_FOR(from, i, bits)]++;
+ for (i = 1; i < BUCKETS; i++)
+ pos[i] += pos[i-1];
+
+ /*
+ * Now we can drop the elements into their correct buckets (in
+ * our temporary array). We iterate the pos counter backwards
+ * to avoid using an extra index to count up. And since we are
+ * going backwards there, we must also go backwards through the
+ * array itself, to keep the sort stable.
+ *
+ * Note that we use an unsigned iterator to make sure we can
+ * handle 2^32-1 objects, even on a 32-bit system. But this
+ * means we cannot use the more obvious "i >= 0" loop condition
+ * for counting backwards, and must instead check for
+ * wrap-around with UINT_MAX.
+ */
+ for (i = n - 1; i != UINT_MAX; i--)
+ to[--pos[BUCKET_FOR(from, i, bits)]] = from[i];
+
+ /*
+ * Now "to" contains the most sorted list, so we swap "from" and
+ * "to" for the next iteration.
+ */
+ swap = from;
+ from = to;
+ to = swap;
+ }
+
+ /*
+ * If we ended with our data in the original array, great. If not,
+ * we have to move it back from the temporary storage.
+ */
+ if (from != entries)
+ memcpy(entries, tmp, n * sizeof(*entries));
+ free(tmp);
+ free(pos);
+
+#undef BUCKET_FOR
+#undef BUCKETS
+#undef DIGIT_SIZE
}
/*
static void create_pack_revindex(struct pack_revindex *rix)
{
struct packed_git *p = rix->p;
- int num_ent = p->num_objects;
- int i;
+ unsigned num_ent = p->num_objects;
+ unsigned i;
const char *index = p->index_data;
rix->revindex = xmalloc(sizeof(*rix->revindex) * (num_ent + 1));
*/
rix->revindex[num_ent].offset = p->pack_size - 20;
rix->revindex[num_ent].nr = -1;
- qsort(rix->revindex, num_ent, sizeof(*rix->revindex), cmp_offset);
+ sort_revindex(rix->revindex, num_ent, p->pack_size);
}
struct revindex_entry *find_pack_revindex(struct packed_git *p, off_t ofs)
{
int num;
- int lo, hi;
+ unsigned lo, hi;
struct pack_revindex *rix;
struct revindex_entry *revindex;
lo = 0;
hi = p->num_objects + 1;
do {
- int mi = (lo + hi) / 2;
+ unsigned mi = lo + (hi - lo) / 2;
if (revindex[mi].offset == ofs) {
return revindex + mi;
} else if (ofs < revindex[mi].offset)
#include "strbuf.h"
#include "string-list.h"
-#ifndef get_st_mode_bits
-/*
- * The replacement lstat(2) we use on Cygwin is incomplete and
- * may return wrong permission bits. Most of the time we do not care,
- * but the callsites of this wrapper do care.
- */
-int get_st_mode_bits(const char *path, int *mode)
+static int get_st_mode_bits(const char *path, int *mode)
{
struct stat st;
if (lstat(path, &st) < 0)
*mode = st.st_mode;
return 0;
}
-#endif
static char bad_path[] = "/bad-path/";
return 0;
}
-const char *relative_path(const char *abs, const char *base)
+/*
+ * Give path as relative to prefix.
+ *
+ * The strbuf may or may not be used, so do not assume it contains the
+ * returned path.
+ */
+const char *relative_path(const char *in, const char *prefix,
+ struct strbuf *sb)
{
- static char buf[PATH_MAX + 1];
+ int in_len = in ? strlen(in) : 0;
+ int prefix_len = prefix ? strlen(prefix) : 0;
+ int in_off = 0;
+ int prefix_off = 0;
int i = 0, j = 0;
- if (!base || !base[0])
- return abs;
- while (base[i]) {
- if (is_dir_sep(base[i])) {
- if (!is_dir_sep(abs[j]))
- return abs;
- while (is_dir_sep(base[i]))
+ if (!in_len)
+ return "./";
+ else if (!prefix_len)
+ return in;
+
+ while (i < prefix_len && j < in_len && prefix[i] == in[j]) {
+ if (is_dir_sep(prefix[i])) {
+ while (is_dir_sep(prefix[i]))
i++;
- while (is_dir_sep(abs[j]))
+ while (is_dir_sep(in[j]))
+ j++;
+ prefix_off = i;
+ in_off = j;
+ } else {
+ i++;
+ j++;
+ }
+ }
+
+ if (
+ /* "prefix" seems like prefix of "in" */
+ i >= prefix_len &&
+ /*
+ * but "/foo" is not a prefix of "/foobar"
+ * (i.e. prefix not end with '/')
+ */
+ prefix_off < prefix_len) {
+ if (j >= in_len) {
+ /* in="/a/b", prefix="/a/b" */
+ in_off = in_len;
+ } else if (is_dir_sep(in[j])) {
+ /* in="/a/b/c", prefix="/a/b" */
+ while (is_dir_sep(in[j]))
j++;
+ in_off = j;
+ } else {
+ /* in="/a/bbb/c", prefix="/a/b" */
+ i = prefix_off;
+ }
+ } else if (
+ /* "in" is short than "prefix" */
+ j >= in_len &&
+ /* "in" not end with '/' */
+ in_off < in_len) {
+ if (is_dir_sep(prefix[i])) {
+ /* in="/a/b", prefix="/a/b/c/" */
+ while (is_dir_sep(prefix[i]))
+ i++;
+ in_off = in_len;
+ }
+ }
+ in += in_off;
+ in_len -= in_off;
+
+ if (i >= prefix_len) {
+ if (!in_len)
+ return "./";
+ else
+ return in;
+ }
+
+ strbuf_reset(sb);
+ strbuf_grow(sb, in_len);
+
+ while (i < prefix_len) {
+ if (is_dir_sep(prefix[i])) {
+ strbuf_addstr(sb, "../");
+ while (is_dir_sep(prefix[i]))
+ i++;
continue;
- } else if (abs[j] != base[i]) {
- return abs;
}
i++;
- j++;
}
- if (
- /* "/foo" is a prefix of "/foo" */
- abs[j] &&
- /* "/foo" is not a prefix of "/foobar" */
- !is_dir_sep(base[i-1]) && !is_dir_sep(abs[j])
- )
- return abs;
- while (is_dir_sep(abs[j]))
- j++;
- if (!abs[j])
- strcpy(buf, ".");
- else
- strcpy(buf, abs + j);
- return buf;
+ if (!is_dir_sep(prefix[prefix_len - 1]))
+ strbuf_addstr(sb, "../");
+
+ strbuf_addstr(sb, in);
+
+ return sb->buf;
}
/*
if (!num_unmatched)
return;
for (i = 0; i < active_nr; i++) {
- struct cache_entry *ce = active_cache[i];
+ const struct cache_entry *ce = active_cache[i];
match_pathspec(pathspec, ce->name, ce_namelen(ce), 0, seen);
}
}
{
int i, path_len = strlen(path);
for (i = 0; i < active_nr; i++) {
- struct cache_entry *ce = active_cache[i];
+ const struct cache_entry *ce = active_cache[i];
if (S_ISGITLINK(ce->ce_mode)) {
int ce_len = ce_namelen(ce);
if (path_len <= ce_len || path[ce_len] != '/' ||
msgstr ""
"Project-Id-Version: PACKAGE VERSION\n"
"Report-Msgid-Bugs-To: Git Mailing List <git@vger.kernel.org>\n"
-"POT-Creation-Date: 2013-04-30 08:25+0800\n"
+"POT-Creation-Date: 2013-07-26 14:19+0800\n"
"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
"Language-Team: LANGUAGE <LL@li.org>\n"
"Content-Transfer-Encoding: 8bit\n"
"Plural-Forms: nplurals=INTEGER; plural=EXPRESSION;\n"
-#: advice.c:53
+#: advice.c:57
#, c-format
msgid "hint: %.*s\n"
msgstr ""
#. * Message used both when 'git commit' fails and when
#. * other commands doing a merge do.
#.
-#: advice.c:83
+#: advice.c:87
msgid ""
"Fix them up in the work tree,\n"
"and then use 'git add/rm <file>' as\n"
msgid "archive format"
msgstr ""
-#: archive.c:324 builtin/log.c:1126
+#: archive.c:324 builtin/log.c:1173
msgid "prefix"
msgstr ""
msgid "prepend prefix to each pathname in the archive"
msgstr ""
-#: archive.c:326 builtin/archive.c:88 builtin/blame.c:2371
-#: builtin/blame.c:2372 builtin/config.c:55 builtin/fast-export.c:665
-#: builtin/fast-export.c:667 builtin/grep.c:715 builtin/hash-object.c:77
-#: builtin/ls-files.c:490 builtin/ls-files.c:493 builtin/notes.c:536
-#: builtin/notes.c:693 builtin/read-tree.c:107 parse-options.h:149
+#: archive.c:326 builtin/archive.c:88 builtin/blame.c:2292
+#: builtin/blame.c:2293 builtin/config.c:56 builtin/fast-export.c:673
+#: builtin/fast-export.c:675 builtin/grep.c:714 builtin/hash-object.c:77
+#: builtin/ls-files.c:496 builtin/ls-files.c:499 builtin/notes.c:408
+#: builtin/notes.c:565 builtin/read-tree.c:108 parse-options.h:152
msgid "file"
msgstr ""
msgid "list supported archive formats"
msgstr ""
-#: archive.c:345 builtin/archive.c:90 builtin/clone.c:86
+#: archive.c:345 builtin/archive.c:90 builtin/clone.c:85
msgid "repo"
msgstr ""
msgid "retrieve the archive from remote repository <repo>"
msgstr ""
-#: archive.c:347 builtin/archive.c:92 builtin/notes.c:615
+#: archive.c:347 builtin/archive.c:92 builtin/notes.c:487
msgid "command"
msgstr ""
msgid "Cannot force update the current branch."
msgstr ""
-#: branch.c:201
+#: branch.c:216
#, c-format
msgid "Cannot setup tracking information; starting point '%s' is not a branch."
msgstr ""
-#: branch.c:203
+#: branch.c:218
#, c-format
msgid "the requested upstream branch '%s' does not exist"
msgstr ""
-#: branch.c:205
+#: branch.c:220
msgid ""
"\n"
"If you are planning on basing your work on an upstream\n"
"\"git push -u\" to set the upstream config as you push."
msgstr ""
-#: branch.c:250
+#: branch.c:265
#, c-format
msgid "Not a valid object name: '%s'."
msgstr ""
-#: branch.c:270
+#: branch.c:285
#, c-format
msgid "Ambiguous object name: '%s'."
msgstr ""
-#: branch.c:275
+#: branch.c:290
#, c-format
msgid "Not a valid branch point: '%s'."
msgstr ""
-#: branch.c:281
+#: branch.c:296
msgid "Failed to lock ref for update"
msgstr ""
-#: branch.c:299
+#: branch.c:314
msgid "Failed to write ref"
msgstr ""
msgid "unrecognized header: %s%s (%d)"
msgstr ""
-#: bundle.c:89 builtin/commit.c:676
+#: bundle.c:89 builtin/commit.c:683
#, c-format
msgid "could not open '%s'"
msgstr ""
msgid "Repository lacks these prerequisite commits:"
msgstr ""
-#: bundle.c:164 sequencer.c:651 sequencer.c:1101 builtin/log.c:300
-#: builtin/log.c:770 builtin/log.c:1344 builtin/log.c:1570 builtin/merge.c:349
-#: builtin/shortlog.c:155
+#: bundle.c:164 sequencer.c:661 sequencer.c:1111 builtin/log.c:331
+#: builtin/log.c:801 builtin/log.c:1399 builtin/log.c:1625 builtin/merge.c:364
+#: builtin/shortlog.c:156
msgid "revision walk setup failed"
msgstr ""
msgid "rev-list died"
msgstr ""
-#: bundle.c:300 builtin/log.c:1255 builtin/shortlog.c:258
+#: bundle.c:300 builtin/log.c:1310 builtin/shortlog.c:259
#, c-format
msgid "unrecognized argument: %s"
msgstr ""
msgid "index-pack died"
msgstr ""
-#: commit.c:50
+#: commit.c:53
#, c-format
msgid "could not parse %s"
msgstr ""
-#: commit.c:52
+#: commit.c:55
#, c-format
msgid "%s %s is not a commit!"
msgstr ""
msgid "memory exhausted"
msgstr ""
-#: connected.c:39
+#: connected.c:60
msgid "Could not run 'git rev-list'"
msgstr ""
-#: connected.c:48
+#: connected.c:80
#, c-format
msgid "failed write to rev-list: %s"
msgstr ""
-#: connected.c:56
+#: connected.c:88
#, c-format
msgid "failed to close rev-list's stdin: %s"
msgstr ""
"%s"
msgstr ""
-#: diff.c:3481
+#: diff.c:3487
#, c-format
msgid ""
"Failed to parse --dirstat/-X option parameter:\n"
"%s"
msgstr ""
-#: diff.c:3495
+#: diff.c:3501
#, c-format
msgid "Failed to parse --submodule option parameter: '%s'"
msgstr ""
msgid "'%s': short read %s"
msgstr ""
-#: help.c:212
+#: help.c:213
#, c-format
msgid "available git commands in '%s'"
msgstr ""
-#: help.c:219
+#: help.c:220
msgid "git commands available from elsewhere on your $PATH"
msgstr ""
-#: help.c:235
+#: help.c:236
msgid "The most commonly used git commands are:"
msgstr ""
-#: help.c:292
+#: help.c:293
#, c-format
msgid ""
"'%s' appears to be a git command, but we were not\n"
"able to execute it. Maybe git-%s is broken?"
msgstr ""
-#: help.c:349
+#: help.c:350
msgid "Uh oh. Your system reports no Git commands at all."
msgstr ""
-#: help.c:371
+#: help.c:372
#, c-format
msgid ""
"WARNING: You called a Git command named '%s', which does not exist.\n"
"Continuing under the assumption that you meant '%s'"
msgstr ""
-#: help.c:376
+#: help.c:377
#, c-format
msgid "in %0.1f seconds automatically..."
msgstr ""
-#: help.c:383
+#: help.c:384
#, c-format
msgid "git: '%s' is not a git command. See 'git --help'."
msgstr ""
-#: help.c:387
+#: help.c:388 help.c:447
msgid ""
"\n"
"Did you mean this?"
msgstr[0] ""
msgstr[1] ""
+#: help.c:443
+#, c-format
+msgid "%s: %s - %s"
+msgstr ""
+
#: merge.c:56
msgid "failed to read the cache"
msgstr ""
#: merge.c:110 builtin/checkout.c:365 builtin/checkout.c:566
-#: builtin/clone.c:645
+#: builtin/clone.c:656
msgid "unable to write new index file"
msgstr ""
msgid "addinfo_cache failed for path '%s'"
msgstr ""
-#: merge-recursive.c:268
+#: merge-recursive.c:269
msgid "error building trees"
msgstr ""
-#: merge-recursive.c:672
+#: merge-recursive.c:673
#, c-format
msgid "failed to create path '%s'%s"
msgstr ""
-#: merge-recursive.c:683
+#: merge-recursive.c:684
#, c-format
msgid "Removing %s to make room for subdirectory\n"
msgstr ""
#. something else exists
#. .. but not some other error (who really cares what?)
-#: merge-recursive.c:697 merge-recursive.c:718
+#: merge-recursive.c:698 merge-recursive.c:719
msgid ": perhaps a D/F conflict?"
msgstr ""
-#: merge-recursive.c:708
+#: merge-recursive.c:709
#, c-format
msgid "refusing to lose untracked file at '%s'"
msgstr ""
-#: merge-recursive.c:748
+#: merge-recursive.c:749
#, c-format
msgid "cannot read object %s '%s'"
msgstr ""
-#: merge-recursive.c:750
+#: merge-recursive.c:751
#, c-format
msgid "blob expected for %s '%s'"
msgstr ""
-#: merge-recursive.c:773 builtin/clone.c:313
+#: merge-recursive.c:774 builtin/clone.c:312
#, c-format
msgid "failed to open '%s'"
msgstr ""
-#: merge-recursive.c:781
+#: merge-recursive.c:782
#, c-format
msgid "failed to symlink '%s'"
msgstr ""
-#: merge-recursive.c:784
+#: merge-recursive.c:785
#, c-format
msgid "do not know what to do with %06o %s '%s'"
msgstr ""
-#: merge-recursive.c:922
+#: merge-recursive.c:923
msgid "Failed to execute internal merge"
msgstr ""
-#: merge-recursive.c:926
+#: merge-recursive.c:927
#, c-format
msgid "Unable to add %s to database"
msgstr ""
-#: merge-recursive.c:942
+#: merge-recursive.c:943
msgid "unsupported object type in the tree"
msgstr ""
-#: merge-recursive.c:1021 merge-recursive.c:1035
+#: merge-recursive.c:1022 merge-recursive.c:1036
#, c-format
msgid ""
"CONFLICT (%s/delete): %s deleted in %s and %s in %s. Version %s of %s left "
"in tree."
msgstr ""
-#: merge-recursive.c:1027 merge-recursive.c:1040
+#: merge-recursive.c:1028 merge-recursive.c:1041
#, c-format
msgid ""
"CONFLICT (%s/delete): %s deleted in %s and %s in %s. Version %s of %s left "
"in tree at %s."
msgstr ""
-#: merge-recursive.c:1081
+#: merge-recursive.c:1082
msgid "rename"
msgstr ""
-#: merge-recursive.c:1081
+#: merge-recursive.c:1082
msgid "renamed"
msgstr ""
-#: merge-recursive.c:1137
+#: merge-recursive.c:1138
#, c-format
msgid "%s is a directory in %s adding as %s instead"
msgstr ""
-#: merge-recursive.c:1159
+#: merge-recursive.c:1160
#, c-format
msgid ""
"CONFLICT (rename/rename): Rename \"%s\"->\"%s\" in branch \"%s\" rename \"%s"
"\"->\"%s\" in \"%s\"%s"
msgstr ""
-#: merge-recursive.c:1164
+#: merge-recursive.c:1165
msgid " (left unresolved)"
msgstr ""
-#: merge-recursive.c:1218
+#: merge-recursive.c:1219
#, c-format
msgid "CONFLICT (rename/rename): Rename %s->%s in %s. Rename %s->%s in %s"
msgstr ""
-#: merge-recursive.c:1248
+#: merge-recursive.c:1249
#, c-format
msgid "Renaming %s to %s and %s to %s instead"
msgstr ""
-#: merge-recursive.c:1447
+#: merge-recursive.c:1448
#, c-format
msgid "CONFLICT (rename/add): Rename %s->%s in %s. %s added in %s"
msgstr ""
-#: merge-recursive.c:1457
+#: merge-recursive.c:1458
#, c-format
msgid "Adding merged %s"
msgstr ""
-#: merge-recursive.c:1462 merge-recursive.c:1660
+#: merge-recursive.c:1463 merge-recursive.c:1661
#, c-format
msgid "Adding as %s instead"
msgstr ""
-#: merge-recursive.c:1513
+#: merge-recursive.c:1514
#, c-format
msgid "cannot read object %s"
msgstr ""
-#: merge-recursive.c:1516
+#: merge-recursive.c:1517
#, c-format
msgid "object %s is not a blob"
msgstr ""
-#: merge-recursive.c:1564
+#: merge-recursive.c:1565
msgid "modify"
msgstr ""
-#: merge-recursive.c:1564
+#: merge-recursive.c:1565
msgid "modified"
msgstr ""
-#: merge-recursive.c:1574
+#: merge-recursive.c:1575
msgid "content"
msgstr ""
-#: merge-recursive.c:1581
+#: merge-recursive.c:1582
msgid "add/add"
msgstr ""
-#: merge-recursive.c:1615
+#: merge-recursive.c:1616
#, c-format
msgid "Skipped %s (merged same as existing)"
msgstr ""
-#: merge-recursive.c:1629
+#: merge-recursive.c:1630
#, c-format
msgid "Auto-merging %s"
msgstr ""
-#: merge-recursive.c:1633 git-submodule.sh:1029
+#: merge-recursive.c:1634 git-submodule.sh:1118
msgid "submodule"
msgstr ""
-#: merge-recursive.c:1634
+#: merge-recursive.c:1635
#, c-format
msgid "CONFLICT (%s): Merge conflict in %s"
msgstr ""
-#: merge-recursive.c:1724
+#: merge-recursive.c:1725
#, c-format
msgid "Removing %s"
msgstr ""
-#: merge-recursive.c:1749
+#: merge-recursive.c:1750
msgid "file/directory"
msgstr ""
-#: merge-recursive.c:1755
+#: merge-recursive.c:1756
msgid "directory/file"
msgstr ""
-#: merge-recursive.c:1760
+#: merge-recursive.c:1761
#, c-format
msgid "CONFLICT (%s): There is a directory with name %s in %s. Adding %s as %s"
msgstr ""
-#: merge-recursive.c:1770
+#: merge-recursive.c:1771
#, c-format
msgid "Adding %s"
msgstr ""
-#: merge-recursive.c:1787
+#: merge-recursive.c:1788
msgid "Fatal merge failure, shouldn't happen."
msgstr ""
-#: merge-recursive.c:1806
+#: merge-recursive.c:1807
msgid "Already up-to-date!"
msgstr ""
-#: merge-recursive.c:1815
+#: merge-recursive.c:1816
#, c-format
msgid "merging of trees %s and %s failed"
msgstr ""
-#: merge-recursive.c:1845
+#: merge-recursive.c:1846
#, c-format
msgid "Unprocessed path??? %s"
msgstr ""
-#: merge-recursive.c:1890
+#: merge-recursive.c:1891
msgid "Merging:"
msgstr ""
-#: merge-recursive.c:1903
+#: merge-recursive.c:1904
#, c-format
msgid "found %u common ancestor:"
msgid_plural "found %u common ancestors:"
msgstr[0] ""
msgstr[1] ""
-#: merge-recursive.c:1940
+#: merge-recursive.c:1941
msgid "merge returned no commit"
msgstr ""
-#: merge-recursive.c:1997
+#: merge-recursive.c:1998
#, c-format
msgid "Could not parse object '%s'"
msgstr ""
-#: merge-recursive.c:2009 builtin/merge.c:658
+#: merge-recursive.c:2010 builtin/merge.c:672
msgid "Unable to write index."
msgstr ""
-#: object.c:195
+#: notes-utils.c:40
+msgid "Cannot commit uninitialized/unreferenced notes tree"
+msgstr ""
+
+#: notes-utils.c:81
+#, c-format
+msgid "Bad notes.rewriteMode value: '%s'"
+msgstr ""
+
+#: notes-utils.c:91
+#, c-format
+msgid "Refusing to rewrite notes in %s (outside of refs/notes/)"
+msgstr ""
+
+#. TRANSLATORS: The first %s is the name of the
+#. environment variable, the second %s is its value
+#: notes-utils.c:118
+#, c-format
+msgid "Bad %s value: '%s'"
+msgstr ""
+
+#: object.c:204
#, c-format
msgid "unable to parse object: %s"
msgstr ""
msgid "'%s' is beyond a symbolic link"
msgstr ""
-#: remote.c:1781
+#: remote.c:1788
#, c-format
msgid "Your branch is ahead of '%s' by %d commit.\n"
msgid_plural "Your branch is ahead of '%s' by %d commits.\n"
msgstr[0] ""
msgstr[1] ""
-#: remote.c:1787
+#: remote.c:1794
msgid " (use \"git push\" to publish your local commits)\n"
msgstr ""
-#: remote.c:1790
+#: remote.c:1797
#, c-format
msgid "Your branch is behind '%s' by %d commit, and can be fast-forwarded.\n"
msgid_plural ""
msgstr[0] ""
msgstr[1] ""
-#: remote.c:1798
+#: remote.c:1805
msgid " (use \"git pull\" to update your local branch)\n"
msgstr ""
-#: remote.c:1801
+#: remote.c:1808
#, c-format
msgid ""
"Your branch and '%s' have diverged,\n"
msgstr[0] ""
msgstr[1] ""
-#: remote.c:1811
+#: remote.c:1818
msgid " (use \"git pull\" to merge the remote branch into yours)\n"
msgstr ""
-#: sequencer.c:206 builtin/merge.c:776 builtin/merge.c:889 builtin/merge.c:999
-#: builtin/merge.c:1009
+#: run-command.c:80
+msgid "open /dev/null failed"
+msgstr ""
+
+#: run-command.c:82
+#, c-format
+msgid "dup2(%d,%d) failed"
+msgstr ""
+
+#: sequencer.c:206 builtin/merge.c:790 builtin/merge.c:903
+#: builtin/merge.c:1013 builtin/merge.c:1023
#, c-format
msgid "Could not open '%s' for writing"
msgstr ""
-#: sequencer.c:208 builtin/merge.c:335 builtin/merge.c:779
-#: builtin/merge.c:1001 builtin/merge.c:1014
+#: sequencer.c:208 builtin/merge.c:350 builtin/merge.c:793
+#: builtin/merge.c:1015 builtin/merge.c:1028
#, c-format
msgid "Could not write to '%s'"
msgstr ""
"and commit the result with 'git commit'"
msgstr ""
-#: sequencer.c:245 sequencer.c:859 sequencer.c:942
+#: sequencer.c:245 sequencer.c:869 sequencer.c:952
#, c-format
msgid "Could not write to %s"
msgstr ""
msgstr ""
#. TRANSLATORS: %s will be "revert" or "cherry-pick"
-#: sequencer.c:319
+#: sequencer.c:324
#, c-format
msgid "%s: Unable to write new index file"
msgstr ""
-#: sequencer.c:350
+#: sequencer.c:355
msgid "Could not resolve HEAD commit\n"
msgstr ""
-#: sequencer.c:371
+#: sequencer.c:377
msgid "Unable to update cache tree\n"
msgstr ""
-#: sequencer.c:416
+#: sequencer.c:422
#, c-format
msgid "Could not parse commit %s\n"
msgstr ""
-#: sequencer.c:421
+#: sequencer.c:427
#, c-format
msgid "Could not parse parent commit %s\n"
msgstr ""
-#: sequencer.c:487
+#: sequencer.c:493
msgid "Your index file is unmerged."
msgstr ""
-#: sequencer.c:506
+#: sequencer.c:512
#, c-format
msgid "Commit %s is a merge but no -m option was given."
msgstr ""
-#: sequencer.c:514
+#: sequencer.c:520
#, c-format
msgid "Commit %s does not have parent %d"
msgstr ""
-#: sequencer.c:518
+#: sequencer.c:524
#, c-format
msgid "Mainline was specified but commit %s is not a merge."
msgstr ""
#. TRANSLATORS: The first %s will be "revert" or
#. "cherry-pick", the second %s a SHA1
-#: sequencer.c:531
+#: sequencer.c:537
#, c-format
msgid "%s: cannot parse parent commit %s"
msgstr ""
-#: sequencer.c:535
+#: sequencer.c:541
#, c-format
msgid "Cannot get commit message for %s"
msgstr ""
-#: sequencer.c:621
+#: sequencer.c:627
#, c-format
msgid "could not revert %s... %s"
msgstr ""
-#: sequencer.c:622
+#: sequencer.c:628
#, c-format
msgid "could not apply %s... %s"
msgstr ""
-#: sequencer.c:654
+#: sequencer.c:664
msgid "empty commit set passed"
msgstr ""
-#: sequencer.c:662
+#: sequencer.c:672
#, c-format
msgid "git %s: failed to read the index"
msgstr ""
-#: sequencer.c:667
+#: sequencer.c:677
#, c-format
msgid "git %s: failed to refresh the index"
msgstr ""
-#: sequencer.c:725
+#: sequencer.c:735
#, c-format
msgid "Cannot %s during a %s"
msgstr ""
-#: sequencer.c:747
+#: sequencer.c:757
#, c-format
msgid "Could not parse line %d."
msgstr ""
-#: sequencer.c:752
+#: sequencer.c:762
msgid "No commits parsed."
msgstr ""
-#: sequencer.c:765
+#: sequencer.c:775
#, c-format
msgid "Could not open %s"
msgstr ""
-#: sequencer.c:769
+#: sequencer.c:779
#, c-format
msgid "Could not read %s."
msgstr ""
-#: sequencer.c:776
+#: sequencer.c:786
#, c-format
msgid "Unusable instruction sheet: %s"
msgstr ""
-#: sequencer.c:804
+#: sequencer.c:814
#, c-format
msgid "Invalid key: %s"
msgstr ""
-#: sequencer.c:807
+#: sequencer.c:817
#, c-format
msgid "Invalid value for %s: %s"
msgstr ""
-#: sequencer.c:819
+#: sequencer.c:829
#, c-format
msgid "Malformed options sheet: %s"
msgstr ""
-#: sequencer.c:840
+#: sequencer.c:850
msgid "a cherry-pick or revert is already in progress"
msgstr ""
-#: sequencer.c:841
+#: sequencer.c:851
msgid "try \"git cherry-pick (--continue | --quit | --abort)\""
msgstr ""
-#: sequencer.c:845
+#: sequencer.c:855
#, c-format
msgid "Could not create sequencer directory %s"
msgstr ""
-#: sequencer.c:861 sequencer.c:946
+#: sequencer.c:871 sequencer.c:956
#, c-format
msgid "Error wrapping up %s."
msgstr ""
-#: sequencer.c:880 sequencer.c:1014
+#: sequencer.c:890 sequencer.c:1024
msgid "no cherry-pick or revert in progress"
msgstr ""
-#: sequencer.c:882
+#: sequencer.c:892
msgid "cannot resolve HEAD"
msgstr ""
-#: sequencer.c:884
+#: sequencer.c:894
msgid "cannot abort from a branch yet to be born"
msgstr ""
-#: sequencer.c:906 builtin/apply.c:4060
+#: sequencer.c:916 builtin/apply.c:4061
#, c-format
msgid "cannot open %s: %s"
msgstr ""
-#: sequencer.c:909
+#: sequencer.c:919
#, c-format
msgid "cannot read %s: %s"
msgstr ""
-#: sequencer.c:910
+#: sequencer.c:920
msgid "unexpected end of file"
msgstr ""
-#: sequencer.c:916
+#: sequencer.c:926
#, c-format
msgid "stored pre-cherry-pick HEAD file '%s' is corrupt"
msgstr ""
-#: sequencer.c:939
+#: sequencer.c:949
#, c-format
msgid "Could not format %s."
msgstr ""
-#: sequencer.c:1083
+#: sequencer.c:1092
#, c-format
msgid "%s: can't cherry-pick a %s"
msgstr ""
-#: sequencer.c:1085
+#: sequencer.c:1095
#, c-format
msgid "%s: bad revision"
msgstr ""
-#: sequencer.c:1119
+#: sequencer.c:1129
msgid "Can't revert as initial commit"
msgstr ""
-#: sequencer.c:1120
+#: sequencer.c:1130
msgid "Can't cherry-pick into empty head"
msgstr ""
-#: sha1_name.c:1036
+#: sha1_name.c:440
+msgid ""
+"Git normally never creates a ref that ends with 40 hex characters\n"
+"because it will be ignored when you just specify 40-hex. These refs\n"
+"may be created by mistake. For example,\n"
+"\n"
+" git checkout -b $br $(git rev-parse ...)\n"
+"\n"
+"where \"$br\" is somehow empty and a 40-hex ref is created. Please\n"
+"examine these refs and maybe delete them. Turn this message off by\n"
+"running \"git config advice.object_name_warning false\""
+msgstr ""
+
+#: sha1_name.c:1097
msgid "HEAD does not point to a branch"
msgstr ""
-#: sha1_name.c:1039
+#: sha1_name.c:1100
#, c-format
msgid "No such branch: '%s'"
msgstr ""
-#: sha1_name.c:1041
+#: sha1_name.c:1102
#, c-format
msgid "No upstream configured for branch '%s'"
msgstr ""
-#: sha1_name.c:1044
+#: sha1_name.c:1106
#, c-format
msgid "Upstream branch '%s' not stored as a remote-tracking branch"
msgstr ""
msgid "unable to access '%s': %s"
msgstr ""
-#: wrapper.c:423
+#: wrapper.c:429
#, c-format
msgid "unable to access '%s'"
msgstr ""
-#: wrapper.c:434
+#: wrapper.c:440
#, c-format
msgid "unable to look up current user in the passwd file: %s"
msgstr ""
-#: wrapper.c:435
+#: wrapper.c:441
msgid "no such user"
msgstr ""
-#: wt-status.c:140
+#: wt-status.c:141
msgid "Unmerged paths:"
msgstr ""
-#: wt-status.c:167 wt-status.c:194
+#: wt-status.c:168 wt-status.c:195
#, c-format
msgid " (use \"git reset %s <file>...\" to unstage)"
msgstr ""
-#: wt-status.c:169 wt-status.c:196
+#: wt-status.c:170 wt-status.c:197
msgid " (use \"git rm --cached <file>...\" to unstage)"
msgstr ""
-#: wt-status.c:173
+#: wt-status.c:174
msgid " (use \"git add <file>...\" to mark resolution)"
msgstr ""
-#: wt-status.c:175 wt-status.c:179
+#: wt-status.c:176 wt-status.c:180
msgid " (use \"git add/rm <file>...\" as appropriate to mark resolution)"
msgstr ""
-#: wt-status.c:177
+#: wt-status.c:178
msgid " (use \"git rm <file>...\" to mark resolution)"
msgstr ""
-#: wt-status.c:188
+#: wt-status.c:189
msgid "Changes to be committed:"
msgstr ""
-#: wt-status.c:206
+#: wt-status.c:207
msgid "Changes not staged for commit:"
msgstr ""
-#: wt-status.c:210
+#: wt-status.c:211
msgid " (use \"git add <file>...\" to update what will be committed)"
msgstr ""
-#: wt-status.c:212
+#: wt-status.c:213
msgid " (use \"git add/rm <file>...\" to update what will be committed)"
msgstr ""
-#: wt-status.c:213
+#: wt-status.c:214
msgid ""
" (use \"git checkout -- <file>...\" to discard changes in working directory)"
msgstr ""
-#: wt-status.c:215
+#: wt-status.c:216
msgid " (commit or discard the untracked or modified content in submodules)"
msgstr ""
-#: wt-status.c:227
+#: wt-status.c:228
#, c-format
msgid " (use \"git %s <file>...\" to include in what will be committed)"
msgstr ""
-#: wt-status.c:244
+#: wt-status.c:245
msgid "bug"
msgstr ""
-#: wt-status.c:249
+#: wt-status.c:250
msgid "both deleted:"
msgstr ""
-#: wt-status.c:250
+#: wt-status.c:251
msgid "added by us:"
msgstr ""
-#: wt-status.c:251
+#: wt-status.c:252
msgid "deleted by them:"
msgstr ""
-#: wt-status.c:252
+#: wt-status.c:253
msgid "added by them:"
msgstr ""
-#: wt-status.c:253
+#: wt-status.c:254
msgid "deleted by us:"
msgstr ""
-#: wt-status.c:254
+#: wt-status.c:255
msgid "both added:"
msgstr ""
-#: wt-status.c:255
+#: wt-status.c:256
msgid "both modified:"
msgstr ""
-#: wt-status.c:285
+#: wt-status.c:286
msgid "new commits, "
msgstr ""
-#: wt-status.c:287
+#: wt-status.c:288
msgid "modified content, "
msgstr ""
-#: wt-status.c:289
+#: wt-status.c:290
msgid "untracked content, "
msgstr ""
-#: wt-status.c:306
+#: wt-status.c:307
#, c-format
msgid "new file: %s"
msgstr ""
-#: wt-status.c:309
+#: wt-status.c:310
#, c-format
msgid "copied: %s -> %s"
msgstr ""
-#: wt-status.c:312
+#: wt-status.c:313
#, c-format
msgid "deleted: %s"
msgstr ""
-#: wt-status.c:315
+#: wt-status.c:316
#, c-format
msgid "modified: %s"
msgstr ""
-#: wt-status.c:318
+#: wt-status.c:319
#, c-format
msgid "renamed: %s -> %s"
msgstr ""
-#: wt-status.c:321
+#: wt-status.c:322
#, c-format
msgid "typechange: %s"
msgstr ""
-#: wt-status.c:324
+#: wt-status.c:325
#, c-format
msgid "unknown: %s"
msgstr ""
-#: wt-status.c:327
+#: wt-status.c:328
#, c-format
msgid "unmerged: %s"
msgstr ""
-#: wt-status.c:330
+#: wt-status.c:331
#, c-format
msgid "bug: unhandled diff status %c"
msgstr ""
msgid "You have unmerged paths."
msgstr ""
-#: wt-status.c:806 wt-status.c:958
+#: wt-status.c:806
msgid " (fix conflicts and run \"git commit\")"
msgstr ""
msgstr ""
#: wt-status.c:829
-msgid " (fix conflicts and then run \"git am --resolved\")"
+msgid " (fix conflicts and then run \"git am --continue\")"
msgstr ""
#: wt-status.c:831
msgid "You are currently cherry-picking."
msgstr ""
+#: wt-status.c:958
+msgid " (fix conflicts and run \"git cherry-pick --continue\")"
+msgstr ""
+
#: wt-status.c:961
-msgid " (all conflicts fixed: run \"git commit\")"
+msgid " (all conflicts fixed: run \"git cherry-pick --continue\")"
+msgstr ""
+
+#: wt-status.c:963
+msgid " (use \"git cherry-pick --abort\" to cancel the cherry-pick operation)"
msgstr ""
-#: wt-status.c:970
+#: wt-status.c:972
#, c-format
msgid "You are currently reverting commit %s."
msgstr ""
-#: wt-status.c:975
+#: wt-status.c:977
msgid " (fix conflicts and run \"git revert --continue\")"
msgstr ""
-#: wt-status.c:978
+#: wt-status.c:980
msgid " (all conflicts fixed: run \"git revert --continue\")"
msgstr ""
-#: wt-status.c:980
+#: wt-status.c:982
msgid " (use \"git revert --abort\" to cancel the revert operation)"
msgstr ""
-#: wt-status.c:991
+#: wt-status.c:993
#, c-format
msgid "You are currently bisecting, started from branch '%s'."
msgstr ""
-#: wt-status.c:995
+#: wt-status.c:997
msgid "You are currently bisecting."
msgstr ""
-#: wt-status.c:998
+#: wt-status.c:1000
msgid " (use \"git bisect reset\" to get back to the original branch)"
msgstr ""
msgid "On branch "
msgstr ""
-#: wt-status.c:1184
+#: wt-status.c:1180
+msgid "rebase in progress; onto "
+msgstr ""
+
+#: wt-status.c:1187
msgid "HEAD detached at "
msgstr ""
-#: wt-status.c:1186
+#: wt-status.c:1189
msgid "HEAD detached from "
msgstr ""
-#: wt-status.c:1189
+#: wt-status.c:1192
msgid "Not currently on any branch."
msgstr ""
-#: wt-status.c:1206
+#: wt-status.c:1209
msgid "Initial commit"
msgstr ""
-#: wt-status.c:1220
+#: wt-status.c:1223
msgid "Untracked files"
msgstr ""
-#: wt-status.c:1222
+#: wt-status.c:1225
msgid "Ignored files"
msgstr ""
-#: wt-status.c:1226
+#: wt-status.c:1229
#, c-format
msgid ""
"It took %.2f seconds to enumerate untracked files. 'status -uno'\n"
"new files yourself (see 'git help status')."
msgstr ""
-#: wt-status.c:1232
+#: wt-status.c:1235
#, c-format
msgid "Untracked files not listed%s"
msgstr ""
-#: wt-status.c:1234
+#: wt-status.c:1237
msgid " (use -u option to show untracked files)"
msgstr ""
-#: wt-status.c:1240
+#: wt-status.c:1243
msgid "No changes"
msgstr ""
-#: wt-status.c:1245
+#: wt-status.c:1248
#, c-format
msgid "no changes added to commit (use \"git add\" and/or \"git commit -a\")\n"
msgstr ""
-#: wt-status.c:1248
+#: wt-status.c:1251
#, c-format
msgid "no changes added to commit\n"
msgstr ""
-#: wt-status.c:1251
+#: wt-status.c:1254
#, c-format
msgid ""
"nothing added to commit but untracked files present (use \"git add\" to "
"track)\n"
msgstr ""
-#: wt-status.c:1254
+#: wt-status.c:1257
#, c-format
msgid "nothing added to commit but untracked files present\n"
msgstr ""
-#: wt-status.c:1257
+#: wt-status.c:1260
#, c-format
msgid "nothing to commit (create/copy files and use \"git add\" to track)\n"
msgstr ""
-#: wt-status.c:1260 wt-status.c:1265
+#: wt-status.c:1263 wt-status.c:1268
#, c-format
msgid "nothing to commit\n"
msgstr ""
-#: wt-status.c:1263
+#: wt-status.c:1266
#, c-format
msgid "nothing to commit (use -u to show untracked files)\n"
msgstr ""
-#: wt-status.c:1267
+#: wt-status.c:1270
#, c-format
msgid "nothing to commit, working directory clean\n"
msgstr ""
-#: wt-status.c:1375
+#: wt-status.c:1378
msgid "HEAD (no branch)"
msgstr ""
-#: wt-status.c:1381
+#: wt-status.c:1384
msgid "Initial commit on "
msgstr ""
-#: wt-status.c:1396
+#: wt-status.c:1399
msgid "behind "
msgstr ""
-#: wt-status.c:1399 wt-status.c:1402
+#: wt-status.c:1402 wt-status.c:1405
msgid "ahead "
msgstr ""
-#: wt-status.c:1404
+#: wt-status.c:1407
msgid ", behind "
msgstr ""
-#: compat/precompose_utf8.c:58 builtin/clone.c:352
+#: compat/precompose_utf8.c:58 builtin/clone.c:351
#, c-format
msgid "failed to unlink '%s'"
msgstr ""
msgid "unexpected diff status %c"
msgstr ""
-#: builtin/add.c:149 builtin/commit.c:233
+#: builtin/add.c:149 builtin/commit.c:238
msgid "updating files failed"
msgstr ""
msgid "Unstaged changes after refreshing the index:"
msgstr ""
-#: builtin/add.c:256 builtin/add.c:572 builtin/rm.c:275
+#: builtin/add.c:256 builtin/add.c:573 builtin/rm.c:337
#, c-format
msgid "pathspec '%s' did not match any files"
msgstr ""
msgid "Could not read the index"
msgstr ""
-#: builtin/add.c:349
+#: builtin/add.c:350
#, c-format
msgid "Could not open '%s' for writing."
msgstr ""
-#: builtin/add.c:353
+#: builtin/add.c:354
msgid "Could not write patch"
msgstr ""
-#: builtin/add.c:358
+#: builtin/add.c:359
#, c-format
msgid "Could not stat '%s'"
msgstr ""
-#: builtin/add.c:360
+#: builtin/add.c:361
msgid "Empty patch. Aborted."
msgstr ""
-#: builtin/add.c:366
+#: builtin/add.c:367
#, c-format
msgid "Could not apply '%s'"
msgstr ""
-#: builtin/add.c:376
+#: builtin/add.c:377
msgid "The following paths are ignored by one of your .gitignore files:\n"
msgstr ""
-#: builtin/add.c:393 builtin/clean.c:161 builtin/fetch.c:78 builtin/mv.c:63
-#: builtin/prune-packed.c:76 builtin/push.c:425 builtin/remote.c:1253
-#: builtin/rm.c:206
+#: builtin/add.c:394 builtin/clean.c:851 builtin/fetch.c:78 builtin/mv.c:63
+#: builtin/prune-packed.c:73 builtin/push.c:451 builtin/remote.c:1253
+#: builtin/rm.c:268
msgid "dry run"
msgstr ""
-#: builtin/add.c:394 builtin/apply.c:4409 builtin/check-ignore.c:19
-#: builtin/commit.c:1152 builtin/count-objects.c:95 builtin/fsck.c:613
-#: builtin/log.c:1518 builtin/mv.c:62 builtin/read-tree.c:112
+#: builtin/add.c:395 builtin/apply.c:4410 builtin/check-ignore.c:19
+#: builtin/commit.c:1201 builtin/count-objects.c:95 builtin/fsck.c:613
+#: builtin/log.c:1573 builtin/mv.c:62 builtin/read-tree.c:113
msgid "be verbose"
msgstr ""
-#: builtin/add.c:396
+#: builtin/add.c:397
msgid "interactive picking"
msgstr ""
-#: builtin/add.c:397 builtin/checkout.c:1063 builtin/reset.c:258
+#: builtin/add.c:398 builtin/checkout.c:1073 builtin/reset.c:261
msgid "select hunks interactively"
msgstr ""
-#: builtin/add.c:398
+#: builtin/add.c:399
msgid "edit current diff and apply"
msgstr ""
-#: builtin/add.c:399
+#: builtin/add.c:400
msgid "allow adding otherwise ignored files"
msgstr ""
-#: builtin/add.c:400
+#: builtin/add.c:401
msgid "update tracked files"
msgstr ""
-#: builtin/add.c:401
+#: builtin/add.c:402
msgid "record only the fact that the path will be added later"
msgstr ""
-#: builtin/add.c:402
+#: builtin/add.c:403
msgid "add changes from all tracked and untracked files"
msgstr ""
#. takes no arguments
-#: builtin/add.c:405
+#: builtin/add.c:406
msgid "ignore paths removed in the working tree (same as --no-all)"
msgstr ""
-#: builtin/add.c:407
+#: builtin/add.c:408
msgid "don't add, only refresh the index"
msgstr ""
-#: builtin/add.c:408
+#: builtin/add.c:409
msgid "just skip files which cannot be added because of errors"
msgstr ""
-#: builtin/add.c:409
+#: builtin/add.c:410
msgid "check if - even missing - files are ignored in dry run"
msgstr ""
-#: builtin/add.c:431
+#: builtin/add.c:432
#, c-format
msgid "Use -f if you really want to add them.\n"
msgstr ""
-#: builtin/add.c:432
+#: builtin/add.c:433
msgid "no files added"
msgstr ""
-#: builtin/add.c:438
+#: builtin/add.c:439
msgid "adding files failed"
msgstr ""
-#: builtin/add.c:477
+#: builtin/add.c:478
msgid "-A and -u are mutually incompatible"
msgstr ""
-#: builtin/add.c:495
+#: builtin/add.c:496
msgid "Option --ignore-missing can only be used together with --dry-run"
msgstr ""
-#: builtin/add.c:525
+#: builtin/add.c:526
#, c-format
msgid "Nothing specified, nothing added.\n"
msgstr ""
-#: builtin/add.c:526
+#: builtin/add.c:527
#, c-format
msgid "Maybe you wanted to say 'git add .'?\n"
msgstr ""
-#: builtin/add.c:532 builtin/check-ignore.c:66 builtin/clean.c:204
-#: builtin/commit.c:293 builtin/mv.c:82 builtin/rm.c:235
+#: builtin/add.c:533 builtin/check-ignore.c:161 builtin/clean.c:895
+#: builtin/commit.c:298 builtin/mv.c:82 builtin/rm.c:297
msgid "index file corrupt"
msgstr ""
-#: builtin/add.c:604 builtin/apply.c:4505 builtin/mv.c:229 builtin/rm.c:370
+#: builtin/add.c:605 builtin/apply.c:4506 builtin/mv.c:229 builtin/rm.c:432
msgid "Unable to write new index file"
msgstr ""
msgid "cannot checkout %s"
msgstr ""
-#: builtin/apply.c:3140 builtin/apply.c:3149 builtin/apply.c:3193
+#: builtin/apply.c:3140 builtin/apply.c:3149 builtin/apply.c:3194
#, c-format
msgid "read of %s failed"
msgstr ""
-#: builtin/apply.c:3173 builtin/apply.c:3395
+#: builtin/apply.c:3174 builtin/apply.c:3396
#, c-format
msgid "path %s has been renamed/deleted"
msgstr ""
-#: builtin/apply.c:3254 builtin/apply.c:3409
+#: builtin/apply.c:3255 builtin/apply.c:3410
#, c-format
msgid "%s: does not exist in index"
msgstr ""
-#: builtin/apply.c:3258 builtin/apply.c:3401 builtin/apply.c:3423
+#: builtin/apply.c:3259 builtin/apply.c:3402 builtin/apply.c:3424
#, c-format
msgid "%s: %s"
msgstr ""
-#: builtin/apply.c:3263 builtin/apply.c:3417
+#: builtin/apply.c:3264 builtin/apply.c:3418
#, c-format
msgid "%s: does not match index"
msgstr ""
-#: builtin/apply.c:3365
+#: builtin/apply.c:3366
msgid "removal patch leaves file contents"
msgstr ""
-#: builtin/apply.c:3434
+#: builtin/apply.c:3435
#, c-format
msgid "%s: wrong type"
msgstr ""
-#: builtin/apply.c:3436
+#: builtin/apply.c:3437
#, c-format
msgid "%s has type %o, expected %o"
msgstr ""
-#: builtin/apply.c:3537
+#: builtin/apply.c:3538
#, c-format
msgid "%s: already exists in index"
msgstr ""
-#: builtin/apply.c:3540
+#: builtin/apply.c:3541
#, c-format
msgid "%s: already exists in working directory"
msgstr ""
-#: builtin/apply.c:3560
+#: builtin/apply.c:3561
#, c-format
msgid "new mode (%o) of %s does not match old mode (%o)"
msgstr ""
-#: builtin/apply.c:3565
+#: builtin/apply.c:3566
#, c-format
msgid "new mode (%o) of %s does not match old mode (%o) of %s"
msgstr ""
-#: builtin/apply.c:3573
+#: builtin/apply.c:3574
#, c-format
msgid "%s: patch does not apply"
msgstr ""
-#: builtin/apply.c:3586
+#: builtin/apply.c:3587
#, c-format
msgid "Checking patch %s..."
msgstr ""
-#: builtin/apply.c:3679 builtin/checkout.c:216 builtin/reset.c:124
+#: builtin/apply.c:3680 builtin/checkout.c:216 builtin/reset.c:127
#, c-format
msgid "make_cache_entry failed for path '%s'"
msgstr ""
-#: builtin/apply.c:3822
+#: builtin/apply.c:3823
#, c-format
msgid "unable to remove %s from index"
msgstr ""
-#: builtin/apply.c:3850
+#: builtin/apply.c:3851
#, c-format
-msgid "corrupt patch for subproject %s"
+msgid "corrupt patch for submodule %s"
msgstr ""
-#: builtin/apply.c:3854
+#: builtin/apply.c:3855
#, c-format
msgid "unable to stat newly created file '%s'"
msgstr ""
-#: builtin/apply.c:3859
+#: builtin/apply.c:3860
#, c-format
msgid "unable to create backing store for newly created file %s"
msgstr ""
-#: builtin/apply.c:3862 builtin/apply.c:3970
+#: builtin/apply.c:3863 builtin/apply.c:3971
#, c-format
msgid "unable to add cache entry for %s"
msgstr ""
-#: builtin/apply.c:3895
+#: builtin/apply.c:3896
#, c-format
msgid "closing file '%s'"
msgstr ""
-#: builtin/apply.c:3944
+#: builtin/apply.c:3945
#, c-format
msgid "unable to write file '%s' mode %o"
msgstr ""
-#: builtin/apply.c:4031
+#: builtin/apply.c:4032
#, c-format
msgid "Applied patch %s cleanly."
msgstr ""
-#: builtin/apply.c:4039
+#: builtin/apply.c:4040
msgid "internal error"
msgstr ""
#. Say this even without --verbose
-#: builtin/apply.c:4042
+#: builtin/apply.c:4043
#, c-format
msgid "Applying patch %%s with %d reject..."
msgid_plural "Applying patch %%s with %d rejects..."
msgstr[0] ""
msgstr[1] ""
-#: builtin/apply.c:4052
+#: builtin/apply.c:4053
#, c-format
msgid "truncating .rej filename to %.*s.rej"
msgstr ""
-#: builtin/apply.c:4073
+#: builtin/apply.c:4074
#, c-format
msgid "Hunk #%d applied cleanly."
msgstr ""
-#: builtin/apply.c:4076
+#: builtin/apply.c:4077
#, c-format
msgid "Rejected hunk #%d."
msgstr ""
-#: builtin/apply.c:4226
+#: builtin/apply.c:4227
msgid "unrecognized input"
msgstr ""
-#: builtin/apply.c:4237
+#: builtin/apply.c:4238
msgid "unable to read index file"
msgstr ""
-#: builtin/apply.c:4356 builtin/apply.c:4359 builtin/clone.c:92
+#: builtin/apply.c:4357 builtin/apply.c:4360 builtin/clone.c:91
#: builtin/fetch.c:63
msgid "path"
msgstr ""
-#: builtin/apply.c:4357
+#: builtin/apply.c:4358
msgid "don't apply changes matching the given path"
msgstr ""
-#: builtin/apply.c:4360
+#: builtin/apply.c:4361
msgid "apply changes matching the given path"
msgstr ""
-#: builtin/apply.c:4362
+#: builtin/apply.c:4363
msgid "num"
msgstr ""
-#: builtin/apply.c:4363
+#: builtin/apply.c:4364
msgid "remove <num> leading slashes from traditional diff paths"
msgstr ""
-#: builtin/apply.c:4366
+#: builtin/apply.c:4367
msgid "ignore additions made by the patch"
msgstr ""
-#: builtin/apply.c:4368
+#: builtin/apply.c:4369
msgid "instead of applying the patch, output diffstat for the input"
msgstr ""
-#: builtin/apply.c:4372
+#: builtin/apply.c:4373
msgid "show number of added and deleted lines in decimal notation"
msgstr ""
-#: builtin/apply.c:4374
+#: builtin/apply.c:4375
msgid "instead of applying the patch, output a summary for the input"
msgstr ""
-#: builtin/apply.c:4376
+#: builtin/apply.c:4377
msgid "instead of applying the patch, see if the patch is applicable"
msgstr ""
-#: builtin/apply.c:4378
+#: builtin/apply.c:4379
msgid "make sure the patch is applicable to the current index"
msgstr ""
-#: builtin/apply.c:4380
+#: builtin/apply.c:4381
msgid "apply a patch without touching the working tree"
msgstr ""
-#: builtin/apply.c:4382
+#: builtin/apply.c:4383
msgid "also apply the patch (use with --stat/--summary/--check)"
msgstr ""
-#: builtin/apply.c:4384
+#: builtin/apply.c:4385
msgid "attempt three-way merge if a patch does not apply"
msgstr ""
-#: builtin/apply.c:4386
+#: builtin/apply.c:4387
msgid "build a temporary index based on embedded index information"
msgstr ""
-#: builtin/apply.c:4388 builtin/checkout-index.c:197 builtin/ls-files.c:456
+#: builtin/apply.c:4389 builtin/checkout-index.c:197 builtin/ls-files.c:462
msgid "paths are separated with NUL character"
msgstr ""
-#: builtin/apply.c:4391
+#: builtin/apply.c:4392
msgid "ensure at least <n> lines of context match"
msgstr ""
-#: builtin/apply.c:4392
+#: builtin/apply.c:4393
msgid "action"
msgstr ""
-#: builtin/apply.c:4393
+#: builtin/apply.c:4394
msgid "detect new or modified lines that have whitespace errors"
msgstr ""
-#: builtin/apply.c:4396 builtin/apply.c:4399
+#: builtin/apply.c:4397 builtin/apply.c:4400
msgid "ignore changes in whitespace when finding context"
msgstr ""
-#: builtin/apply.c:4402
+#: builtin/apply.c:4403
msgid "apply the patch in reverse"
msgstr ""
-#: builtin/apply.c:4404
+#: builtin/apply.c:4405
msgid "don't expect at least one line of context"
msgstr ""
-#: builtin/apply.c:4406
+#: builtin/apply.c:4407
msgid "leave the rejected hunks in corresponding *.rej files"
msgstr ""
-#: builtin/apply.c:4408
+#: builtin/apply.c:4409
msgid "allow overlapping hunks"
msgstr ""
-#: builtin/apply.c:4411
+#: builtin/apply.c:4412
msgid "tolerate incorrectly detected missing new-line at the end of file"
msgstr ""
-#: builtin/apply.c:4414
+#: builtin/apply.c:4415
msgid "do not trust the line counts in the hunk headers"
msgstr ""
-#: builtin/apply.c:4416
+#: builtin/apply.c:4417
msgid "root"
msgstr ""
-#: builtin/apply.c:4417
+#: builtin/apply.c:4418
msgid "prepend <root> to all filenames"
msgstr ""
-#: builtin/apply.c:4439
+#: builtin/apply.c:4440
msgid "--3way outside a repository"
msgstr ""
-#: builtin/apply.c:4447
+#: builtin/apply.c:4448
msgid "--index outside a repository"
msgstr ""
-#: builtin/apply.c:4450
+#: builtin/apply.c:4451
msgid "--cached outside a repository"
msgstr ""
-#: builtin/apply.c:4466
+#: builtin/apply.c:4467
#, c-format
msgid "can't open patch '%s'"
msgstr ""
-#: builtin/apply.c:4480
+#: builtin/apply.c:4481
#, c-format
msgid "squelched %d whitespace error"
msgid_plural "squelched %d whitespace errors"
msgstr[0] ""
msgstr[1] ""
-#: builtin/apply.c:4486 builtin/apply.c:4496
+#: builtin/apply.c:4487 builtin/apply.c:4497
#, c-format
msgid "%d line adds whitespace errors."
msgid_plural "%d lines add whitespace errors."
msgid "update BISECT_HEAD instead of checking out the current commit"
msgstr ""
-#: builtin/blame.c:25
+#: builtin/blame.c:26
msgid "git blame [options] [rev-opts] [rev] [--] file"
msgstr ""
-#: builtin/blame.c:30
+#: builtin/blame.c:31
msgid "[rev-opts] are documented in git-rev-list(1)"
msgstr ""
-#: builtin/blame.c:2355
+#: builtin/blame.c:2276
msgid "Show blame entries as we find them, incrementally"
msgstr ""
-#: builtin/blame.c:2356
+#: builtin/blame.c:2277
msgid "Show blank SHA-1 for boundary commits (Default: off)"
msgstr ""
-#: builtin/blame.c:2357
+#: builtin/blame.c:2278
msgid "Do not treat root commits as boundaries (Default: off)"
msgstr ""
-#: builtin/blame.c:2358
+#: builtin/blame.c:2279
msgid "Show work cost statistics"
msgstr ""
-#: builtin/blame.c:2359
+#: builtin/blame.c:2280
msgid "Show output score for blame entries"
msgstr ""
-#: builtin/blame.c:2360
+#: builtin/blame.c:2281
msgid "Show original filename (Default: auto)"
msgstr ""
-#: builtin/blame.c:2361
+#: builtin/blame.c:2282
msgid "Show original linenumber (Default: off)"
msgstr ""
-#: builtin/blame.c:2362
+#: builtin/blame.c:2283
msgid "Show in a format designed for machine consumption"
msgstr ""
-#: builtin/blame.c:2363
+#: builtin/blame.c:2284
msgid "Show porcelain format with per-line commit information"
msgstr ""
-#: builtin/blame.c:2364
+#: builtin/blame.c:2285
msgid "Use the same output mode as git-annotate (Default: off)"
msgstr ""
-#: builtin/blame.c:2365
+#: builtin/blame.c:2286
msgid "Show raw timestamp (Default: off)"
msgstr ""
-#: builtin/blame.c:2366
+#: builtin/blame.c:2287
msgid "Show long commit SHA1 (Default: off)"
msgstr ""
-#: builtin/blame.c:2367
+#: builtin/blame.c:2288
msgid "Suppress author name and timestamp (Default: off)"
msgstr ""
-#: builtin/blame.c:2368
+#: builtin/blame.c:2289
msgid "Show author email instead of name (Default: off)"
msgstr ""
-#: builtin/blame.c:2369
+#: builtin/blame.c:2290
msgid "Ignore whitespace differences"
msgstr ""
-#: builtin/blame.c:2370
+#: builtin/blame.c:2291
msgid "Spend extra cycles to find better match"
msgstr ""
-#: builtin/blame.c:2371
+#: builtin/blame.c:2292
msgid "Use revisions from <file> instead of calling git-rev-list"
msgstr ""
-#: builtin/blame.c:2372
+#: builtin/blame.c:2293
msgid "Use <file>'s contents as the final image"
msgstr ""
-#: builtin/blame.c:2373 builtin/blame.c:2374
+#: builtin/blame.c:2294 builtin/blame.c:2295
msgid "score"
msgstr ""
-#: builtin/blame.c:2373
+#: builtin/blame.c:2294
msgid "Find line copies within and across files"
msgstr ""
-#: builtin/blame.c:2374
+#: builtin/blame.c:2295
msgid "Find line movements within and across files"
msgstr ""
-#: builtin/blame.c:2375
+#: builtin/blame.c:2296
msgid "n,m"
msgstr ""
-#: builtin/blame.c:2375
+#: builtin/blame.c:2296
msgid "Process only line range n,m, counting from 1"
msgstr ""
msgstr ""
#: builtin/branch.c:805 builtin/branch.c:811 builtin/branch.c:832
-#: builtin/branch.c:838 builtin/commit.c:1368 builtin/commit.c:1369
-#: builtin/commit.c:1370 builtin/commit.c:1371 builtin/tag.c:468
+#: builtin/branch.c:838 builtin/commit.c:1414 builtin/commit.c:1415
+#: builtin/commit.c:1416 builtin/commit.c:1417 builtin/tag.c:468
msgid "commit"
msgstr ""
msgid "Failed to resolve HEAD as a valid ref."
msgstr ""
-#: builtin/branch.c:860 builtin/clone.c:619
+#: builtin/branch.c:860 builtin/clone.c:630
msgid "HEAD not found below refs/heads!"
msgstr ""
msgid "Need a repository to unbundle."
msgstr ""
-#: builtin/cat-file.c:176
+#: builtin/cat-file.c:303
msgid "git cat-file (-t|-s|-e|-p|<type>|--textconv) <object>"
msgstr ""
-#: builtin/cat-file.c:177
+#: builtin/cat-file.c:304
msgid "git cat-file (--batch|--batch-check) < <list_of_objects>"
msgstr ""
-#: builtin/cat-file.c:195
+#: builtin/cat-file.c:341
msgid "<type> can be one of: blob, tree, commit, tag"
msgstr ""
-#: builtin/cat-file.c:196
+#: builtin/cat-file.c:342
msgid "show object type"
msgstr ""
-#: builtin/cat-file.c:197
+#: builtin/cat-file.c:343
msgid "show object size"
msgstr ""
-#: builtin/cat-file.c:199
+#: builtin/cat-file.c:345
msgid "exit with zero when there's no error"
msgstr ""
-#: builtin/cat-file.c:200
+#: builtin/cat-file.c:346
msgid "pretty-print object's content"
msgstr ""
-#: builtin/cat-file.c:202
+#: builtin/cat-file.c:348
msgid "for blob objects, run textconv on object's content"
msgstr ""
-#: builtin/cat-file.c:204
+#: builtin/cat-file.c:350
msgid "show info and content of objects fed from the standard input"
msgstr ""
-#: builtin/cat-file.c:207
+#: builtin/cat-file.c:353
msgid "show info about objects fed from the standard input"
msgstr ""
msgid "input paths are terminated by a null character"
msgstr ""
-#: builtin/check-ignore.c:18 builtin/checkout.c:1044 builtin/gc.c:177
+#: builtin/check-ignore.c:18 builtin/checkout.c:1054 builtin/gc.c:177
msgid "suppress progress reporting"
msgstr ""
-#: builtin/check-ignore.c:146
+#: builtin/check-ignore.c:26
+msgid "show non-matching input paths"
+msgstr ""
+
+#: builtin/check-ignore.c:143
msgid "cannot specify pathnames with --stdin"
msgstr ""
-#: builtin/check-ignore.c:149
+#: builtin/check-ignore.c:146
msgid "-z only makes sense with --stdin"
msgstr ""
-#: builtin/check-ignore.c:151
+#: builtin/check-ignore.c:148
msgid "no path specified"
msgstr ""
-#: builtin/check-ignore.c:155
+#: builtin/check-ignore.c:152
msgid "--quiet is only valid with a single pathname"
msgstr ""
-#: builtin/check-ignore.c:157
+#: builtin/check-ignore.c:154
msgid "cannot have both --quiet and --verbose"
msgstr ""
+#: builtin/check-ignore.c:157
+msgid "--non-matching is only valid with --verbose"
+msgstr ""
+
+#: builtin/check-mailmap.c:8
+msgid "git check-mailmap [options] <contact>..."
+msgstr ""
+
+#: builtin/check-mailmap.c:13
+msgid "also read contacts from stdin"
+msgstr ""
+
+#: builtin/check-mailmap.c:24
+#, c-format
+msgid "unable to parse contact: %s"
+msgstr ""
+
+#: builtin/check-mailmap.c:47
+msgid "no contacts specified"
+msgstr ""
+
#: builtin/checkout-index.c:126
msgid "git checkout-index [options] [--] [<file>...]"
msgstr ""
msgid "Can not do reflog for '%s'\n"
msgstr ""
-#: builtin/checkout.c:634
+#: builtin/checkout.c:639
msgid "HEAD is now at"
msgstr ""
-#: builtin/checkout.c:641
+#: builtin/checkout.c:646
#, c-format
msgid "Reset branch '%s'\n"
msgstr ""
-#: builtin/checkout.c:644
+#: builtin/checkout.c:649
#, c-format
msgid "Already on '%s'\n"
msgstr ""
-#: builtin/checkout.c:648
+#: builtin/checkout.c:653
#, c-format
msgid "Switched to and reset branch '%s'\n"
msgstr ""
-#: builtin/checkout.c:650 builtin/checkout.c:987
+#: builtin/checkout.c:655 builtin/checkout.c:997
#, c-format
msgid "Switched to a new branch '%s'\n"
msgstr ""
-#: builtin/checkout.c:652
+#: builtin/checkout.c:657
#, c-format
msgid "Switched to branch '%s'\n"
msgstr ""
-#: builtin/checkout.c:708
+#: builtin/checkout.c:713
#, c-format
msgid " ... and %d more.\n"
msgstr ""
#. The singular version
-#: builtin/checkout.c:714
+#: builtin/checkout.c:719
#, c-format
msgid ""
"Warning: you are leaving %d commit behind, not connected to\n"
msgstr[0] ""
msgstr[1] ""
-#: builtin/checkout.c:732
+#: builtin/checkout.c:737
#, c-format
msgid ""
"If you want to keep them by creating a new branch, this may be a good time\n"
"\n"
msgstr ""
-#: builtin/checkout.c:762
+#: builtin/checkout.c:767
msgid "internal error in revision walk"
msgstr ""
-#: builtin/checkout.c:766
+#: builtin/checkout.c:771
msgid "Previous HEAD position was"
msgstr ""
-#: builtin/checkout.c:793 builtin/checkout.c:982
+#: builtin/checkout.c:798 builtin/checkout.c:992
msgid "You are on a branch yet to be born"
msgstr ""
#. case (1)
-#: builtin/checkout.c:918
+#: builtin/checkout.c:928
#, c-format
msgid "invalid reference: %s"
msgstr ""
#. case (1): want a tree
-#: builtin/checkout.c:957
+#: builtin/checkout.c:967
#, c-format
msgid "reference is not a tree: %s"
msgstr ""
-#: builtin/checkout.c:996
+#: builtin/checkout.c:1006
msgid "paths cannot be used with switching branches"
msgstr ""
-#: builtin/checkout.c:999 builtin/checkout.c:1003
+#: builtin/checkout.c:1009 builtin/checkout.c:1013
#, c-format
msgid "'%s' cannot be used with switching branches"
msgstr ""
-#: builtin/checkout.c:1007 builtin/checkout.c:1010 builtin/checkout.c:1015
-#: builtin/checkout.c:1018
+#: builtin/checkout.c:1017 builtin/checkout.c:1020 builtin/checkout.c:1025
+#: builtin/checkout.c:1028
#, c-format
msgid "'%s' cannot be used with '%s'"
msgstr ""
-#: builtin/checkout.c:1023
+#: builtin/checkout.c:1033
#, c-format
msgid "Cannot switch branch to a non-commit '%s'"
msgstr ""
-#: builtin/checkout.c:1045 builtin/checkout.c:1047 builtin/clone.c:90
+#: builtin/checkout.c:1055 builtin/checkout.c:1057 builtin/clone.c:89
#: builtin/remote.c:169 builtin/remote.c:171
msgid "branch"
msgstr ""
-#: builtin/checkout.c:1046
+#: builtin/checkout.c:1056
msgid "create and checkout a new branch"
msgstr ""
-#: builtin/checkout.c:1048
+#: builtin/checkout.c:1058
msgid "create/reset and checkout a branch"
msgstr ""
-#: builtin/checkout.c:1049
+#: builtin/checkout.c:1059
msgid "create reflog for new branch"
msgstr ""
-#: builtin/checkout.c:1050
+#: builtin/checkout.c:1060
msgid "detach the HEAD at named commit"
msgstr ""
-#: builtin/checkout.c:1051
+#: builtin/checkout.c:1061
msgid "set upstream info for new branch"
msgstr ""
-#: builtin/checkout.c:1053
+#: builtin/checkout.c:1063
msgid "new branch"
msgstr ""
-#: builtin/checkout.c:1053
+#: builtin/checkout.c:1063
msgid "new unparented branch"
msgstr ""
-#: builtin/checkout.c:1054
+#: builtin/checkout.c:1064
msgid "checkout our version for unmerged files"
msgstr ""
-#: builtin/checkout.c:1056
+#: builtin/checkout.c:1066
msgid "checkout their version for unmerged files"
msgstr ""
-#: builtin/checkout.c:1058
+#: builtin/checkout.c:1068
msgid "force checkout (throw away local modifications)"
msgstr ""
-#: builtin/checkout.c:1059
+#: builtin/checkout.c:1069
msgid "perform a 3-way merge with the new branch"
msgstr ""
-#: builtin/checkout.c:1060 builtin/merge.c:217
+#: builtin/checkout.c:1070 builtin/merge.c:232
msgid "update ignored files (default)"
msgstr ""
-#: builtin/checkout.c:1061 builtin/log.c:1158 parse-options.h:245
+#: builtin/checkout.c:1071 builtin/log.c:1208 parse-options.h:249
msgid "style"
msgstr ""
-#: builtin/checkout.c:1062
+#: builtin/checkout.c:1072
msgid "conflict style (merge or diff3)"
msgstr ""
-#: builtin/checkout.c:1065
+#: builtin/checkout.c:1075
msgid "do not limit pathspecs to sparse entries only"
msgstr ""
-#: builtin/checkout.c:1067
+#: builtin/checkout.c:1077
msgid "second guess 'git checkout no-such-branch'"
msgstr ""
-#: builtin/checkout.c:1091
+#: builtin/checkout.c:1101
msgid "-b, -B and --orphan are mutually exclusive"
msgstr ""
-#: builtin/checkout.c:1108
+#: builtin/checkout.c:1118
msgid "--track needs a branch name"
msgstr ""
-#: builtin/checkout.c:1115
+#: builtin/checkout.c:1125
msgid "Missing branch name; try -b"
msgstr ""
-#: builtin/checkout.c:1150
+#: builtin/checkout.c:1160
msgid "invalid path specification"
msgstr ""
-#: builtin/checkout.c:1157
+#: builtin/checkout.c:1167
#, c-format
msgid ""
"Cannot update paths and switch to branch '%s' at the same time.\n"
"Did you intend to checkout '%s' which can not be resolved as commit?"
msgstr ""
-#: builtin/checkout.c:1162
+#: builtin/checkout.c:1172
#, c-format
msgid "git checkout: --detach does not take a path argument '%s'"
msgstr ""
-#: builtin/checkout.c:1166
+#: builtin/checkout.c:1176
msgid ""
"git checkout: --ours/--theirs, --force and --merge are incompatible when\n"
"checking out of the index."
msgstr ""
-#: builtin/clean.c:20
-msgid "git clean [-d] [-f] [-n] [-q] [-e <pattern>] [-x | -X] [--] <paths>..."
+#: builtin/clean.c:25
+msgid ""
+"git clean [-d] [-f] [-i] [-n] [-q] [-e <pattern>] [-x | -X] [--] <paths>..."
msgstr ""
-#: builtin/clean.c:24
+#: builtin/clean.c:29
#, c-format
msgid "Removing %s\n"
msgstr ""
-#: builtin/clean.c:25
+#: builtin/clean.c:30
#, c-format
msgid "Would remove %s\n"
msgstr ""
-#: builtin/clean.c:26
+#: builtin/clean.c:31
#, c-format
msgid "Skipping repository %s\n"
msgstr ""
-#: builtin/clean.c:27
+#: builtin/clean.c:32
#, c-format
msgid "Would skip repository %s\n"
msgstr ""
-#: builtin/clean.c:28
+#: builtin/clean.c:33
#, c-format
msgid "failed to remove %s"
msgstr ""
-#: builtin/clean.c:160
+#: builtin/clean.c:293
+msgid ""
+"Prompt help:\n"
+"1 - select a numbered item\n"
+"foo - select item based on unique prefix\n"
+" - (empty) select nothing"
+msgstr ""
+
+#: builtin/clean.c:297
+msgid ""
+"Prompt help:\n"
+"1 - select a single item\n"
+"3-5 - select a range of items\n"
+"2-3,6-9 - select multiple ranges\n"
+"foo - select item based on unique prefix\n"
+"-... - unselect specified items\n"
+"* - choose all items\n"
+" - (empty) finish selecting"
+msgstr ""
+
+#: builtin/clean.c:491
+#, c-format
+msgid "Huh (%s)?"
+msgstr ""
+
+#: builtin/clean.c:634
+#, c-format
+msgid "Input ignore patterns>> "
+msgstr ""
+
+#: builtin/clean.c:671
+#, c-format
+msgid "WARNING: Cannot find items matched by: %s"
+msgstr ""
+
+#: builtin/clean.c:692
+msgid "Select items to delete"
+msgstr ""
+
+#: builtin/clean.c:732
+#, c-format
+msgid "remove %s? "
+msgstr ""
+
+#: builtin/clean.c:757
+msgid "Bye."
+msgstr ""
+
+#: builtin/clean.c:765
+msgid ""
+"clean - start cleaning\n"
+"filter by pattern - exclude items from deletion\n"
+"select by numbers - select items to be deleted by numbers\n"
+"ask each - confirm each deletion (like \"rm -i\")\n"
+"quit - stop cleaning\n"
+"help - this screen\n"
+"? - help for prompt selection"
+msgstr ""
+
+#: builtin/clean.c:792
+msgid "*** Commands ***"
+msgstr ""
+
+#: builtin/clean.c:793
+msgid "What now"
+msgstr ""
+
+#: builtin/clean.c:801
+msgid "Would remove the following item:"
+msgid_plural "Would remove the following items:"
+msgstr[0] ""
+msgstr[1] ""
+
+#: builtin/clean.c:818
+msgid "No more files to clean, exiting."
+msgstr ""
+
+#: builtin/clean.c:850
msgid "do not print names of files removed"
msgstr ""
-#: builtin/clean.c:162
+#: builtin/clean.c:852
msgid "force"
msgstr ""
-#: builtin/clean.c:164
+#: builtin/clean.c:853
+msgid "interactive cleaning"
+msgstr ""
+
+#: builtin/clean.c:855
msgid "remove whole directories"
msgstr ""
-#: builtin/clean.c:165 builtin/describe.c:412 builtin/grep.c:717
-#: builtin/ls-files.c:487 builtin/name-rev.c:231 builtin/show-ref.c:182
+#: builtin/clean.c:856 builtin/describe.c:420 builtin/grep.c:716
+#: builtin/ls-files.c:493 builtin/name-rev.c:315 builtin/show-ref.c:186
msgid "pattern"
msgstr ""
-#: builtin/clean.c:166
+#: builtin/clean.c:857
msgid "add <pattern> to ignore rules"
msgstr ""
-#: builtin/clean.c:167
+#: builtin/clean.c:858
msgid "remove ignored files, too"
msgstr ""
-#: builtin/clean.c:169
+#: builtin/clean.c:860
msgid "remove only ignored files"
msgstr ""
-#: builtin/clean.c:187
+#: builtin/clean.c:878
msgid "-x and -X cannot be used together"
msgstr ""
-#: builtin/clean.c:191
+#: builtin/clean.c:882
msgid ""
-"clean.requireForce set to true and neither -n nor -f given; refusing to clean"
+"clean.requireForce set to true and neither -i, -n nor -f given; refusing to "
+"clean"
msgstr ""
-#: builtin/clean.c:194
+#: builtin/clean.c:885
msgid ""
-"clean.requireForce defaults to true and neither -n nor -f given; refusing to "
-"clean"
+"clean.requireForce defaults to true and neither -i, -n nor -f given; "
+"refusing to clean"
msgstr ""
-#: builtin/clone.c:37
+#: builtin/clone.c:36
msgid "git clone [options] [--] <repo> [<dir>]"
msgstr ""
-#: builtin/clone.c:65 builtin/fetch.c:82 builtin/merge.c:214
-#: builtin/push.c:436
+#: builtin/clone.c:64 builtin/fetch.c:82 builtin/merge.c:229
+#: builtin/push.c:462
msgid "force progress reporting"
msgstr ""
-#: builtin/clone.c:67
+#: builtin/clone.c:66
msgid "don't create a checkout"
msgstr ""
-#: builtin/clone.c:68 builtin/clone.c:70 builtin/init-db.c:488
+#: builtin/clone.c:67 builtin/clone.c:69 builtin/init-db.c:488
msgid "create a bare repository"
msgstr ""
-#: builtin/clone.c:73
+#: builtin/clone.c:72
msgid "create a mirror repository (implies bare)"
msgstr ""
-#: builtin/clone.c:75
+#: builtin/clone.c:74
msgid "to clone from a local repository"
msgstr ""
-#: builtin/clone.c:77
+#: builtin/clone.c:76
msgid "don't use local hardlinks, always copy"
msgstr ""
-#: builtin/clone.c:79
+#: builtin/clone.c:78
msgid "setup as shared repository"
msgstr ""
-#: builtin/clone.c:81 builtin/clone.c:83
+#: builtin/clone.c:80 builtin/clone.c:82
msgid "initialize submodules in the clone"
msgstr ""
-#: builtin/clone.c:84 builtin/init-db.c:485
+#: builtin/clone.c:83 builtin/init-db.c:485
msgid "template-directory"
msgstr ""
-#: builtin/clone.c:85 builtin/init-db.c:486
+#: builtin/clone.c:84 builtin/init-db.c:486
msgid "directory from which templates will be used"
msgstr ""
-#: builtin/clone.c:87
+#: builtin/clone.c:86
msgid "reference repository"
msgstr ""
-#: builtin/clone.c:88 builtin/column.c:26 builtin/merge-file.c:44
+#: builtin/clone.c:87 builtin/column.c:26 builtin/merge-file.c:44
msgid "name"
msgstr ""
-#: builtin/clone.c:89
+#: builtin/clone.c:88
msgid "use <name> instead of 'origin' to track upstream"
msgstr ""
-#: builtin/clone.c:91
+#: builtin/clone.c:90
msgid "checkout <branch> instead of the remote's HEAD"
msgstr ""
-#: builtin/clone.c:93
+#: builtin/clone.c:92
msgid "path to git-upload-pack on the remote"
msgstr ""
-#: builtin/clone.c:94 builtin/fetch.c:83 builtin/grep.c:662
+#: builtin/clone.c:93 builtin/fetch.c:83 builtin/grep.c:661
msgid "depth"
msgstr ""
-#: builtin/clone.c:95
+#: builtin/clone.c:94
msgid "create a shallow clone of that depth"
msgstr ""
-#: builtin/clone.c:97
+#: builtin/clone.c:96
msgid "clone only one branch, HEAD or --branch"
msgstr ""
-#: builtin/clone.c:98 builtin/init-db.c:494
+#: builtin/clone.c:97 builtin/init-db.c:494
msgid "gitdir"
msgstr ""
-#: builtin/clone.c:99 builtin/init-db.c:495
+#: builtin/clone.c:98 builtin/init-db.c:495
msgid "separate git dir from working tree"
msgstr ""
-#: builtin/clone.c:100
+#: builtin/clone.c:99
msgid "key=value"
msgstr ""
-#: builtin/clone.c:101
+#: builtin/clone.c:100
msgid "set config inside the new repository"
msgstr ""
-#: builtin/clone.c:254
+#: builtin/clone.c:253
#, c-format
msgid "reference repository '%s' is not a local repository."
msgstr ""
-#: builtin/clone.c:317
+#: builtin/clone.c:316
#, c-format
msgid "failed to create directory '%s'"
msgstr ""
-#: builtin/clone.c:319 builtin/diff.c:77
+#: builtin/clone.c:318 builtin/diff.c:77
#, c-format
msgid "failed to stat '%s'"
msgstr ""
-#: builtin/clone.c:321
+#: builtin/clone.c:320
#, c-format
msgid "%s exists and is not a directory"
msgstr ""
-#: builtin/clone.c:335
+#: builtin/clone.c:334
#, c-format
msgid "failed to stat %s\n"
msgstr ""
-#: builtin/clone.c:357
+#: builtin/clone.c:356
#, c-format
msgid "failed to create link '%s'"
msgstr ""
-#: builtin/clone.c:361
+#: builtin/clone.c:360
#, c-format
msgid "failed to copy file to '%s'"
msgstr ""
-#: builtin/clone.c:384
+#: builtin/clone.c:383
#, c-format
msgid "done.\n"
msgstr ""
-#: builtin/clone.c:397
+#: builtin/clone.c:396
msgid ""
"Clone succeeded, but checkout failed.\n"
"You can inspect what was checked out with 'git status'\n"
"and retry the checkout with 'git checkout -f HEAD'\n"
msgstr ""
-#: builtin/clone.c:476
+#: builtin/clone.c:475
#, c-format
msgid "Could not find remote branch %s to clone."
msgstr ""
-#: builtin/clone.c:550
+#: builtin/clone.c:555
+#, c-format
+msgid "Checking connectivity... "
+msgstr ""
+
+#: builtin/clone.c:558
msgid "remote did not send all necessary objects"
msgstr ""
-#: builtin/clone.c:610
+#: builtin/clone.c:560
+#, c-format
+msgid "done\n"
+msgstr ""
+
+#: builtin/clone.c:621
msgid "remote HEAD refers to nonexistent ref, unable to checkout.\n"
msgstr ""
-#: builtin/clone.c:641
+#: builtin/clone.c:652
msgid "unable to checkout working tree"
msgstr ""
-#: builtin/clone.c:749
+#: builtin/clone.c:760
msgid "Too many arguments."
msgstr ""
-#: builtin/clone.c:753
+#: builtin/clone.c:764
msgid "You must specify a repository to clone."
msgstr ""
-#: builtin/clone.c:764
+#: builtin/clone.c:775
#, c-format
msgid "--bare and --origin %s options are incompatible."
msgstr ""
-#: builtin/clone.c:767
+#: builtin/clone.c:778
msgid "--bare and --separate-git-dir are incompatible."
msgstr ""
-#: builtin/clone.c:780
+#: builtin/clone.c:791
#, c-format
msgid "repository '%s' does not exist"
msgstr ""
-#: builtin/clone.c:785
+#: builtin/clone.c:796
msgid "--depth is ignored in local clones; use file:// instead."
msgstr ""
-#: builtin/clone.c:795
+#: builtin/clone.c:798
+msgid "--local is ignored"
+msgstr ""
+
+#: builtin/clone.c:808
#, c-format
msgid "destination path '%s' already exists and is not an empty directory."
msgstr ""
-#: builtin/clone.c:805
+#: builtin/clone.c:818
#, c-format
msgid "working tree '%s' already exists."
msgstr ""
-#: builtin/clone.c:818 builtin/clone.c:830
+#: builtin/clone.c:831 builtin/clone.c:843
#, c-format
msgid "could not create leading directories of '%s'"
msgstr ""
-#: builtin/clone.c:821
+#: builtin/clone.c:834
#, c-format
msgid "could not create work tree dir '%s'."
msgstr ""
-#: builtin/clone.c:840
+#: builtin/clone.c:853
#, c-format
msgid "Cloning into bare repository '%s'...\n"
msgstr ""
-#: builtin/clone.c:842
+#: builtin/clone.c:855
#, c-format
msgid "Cloning into '%s'...\n"
msgstr ""
-#: builtin/clone.c:877
+#: builtin/clone.c:890
#, c-format
msgid "Don't know how to clone %s"
msgstr ""
-#: builtin/clone.c:926
+#: builtin/clone.c:942
#, c-format
msgid "Remote branch %s not found in upstream %s"
msgstr ""
-#: builtin/clone.c:933
+#: builtin/clone.c:949
msgid "You appear to have cloned an empty repository."
msgstr ""
msgid "--command must be the first argument"
msgstr ""
-#: builtin/commit.c:34
+#: builtin/commit.c:35
msgid "git commit [options] [--] <pathspec>..."
msgstr ""
-#: builtin/commit.c:39
+#: builtin/commit.c:40
msgid "git status [options] [--] <pathspec>..."
msgstr ""
-#: builtin/commit.c:44
+#: builtin/commit.c:45
msgid ""
"Your name and email address were configured automatically based\n"
"on your username and hostname. Please check that they are accurate.\n"
" git commit --amend --reset-author\n"
msgstr ""
-#: builtin/commit.c:56
+#: builtin/commit.c:57
msgid ""
"You asked to amend the most recent commit, but doing so would make\n"
"it empty. You can repeat your command with --allow-empty, or you can\n"
"remove the commit entirely with \"git reset HEAD^\".\n"
msgstr ""
-#: builtin/commit.c:61
+#: builtin/commit.c:62
msgid ""
"The previous cherry-pick is now empty, possibly due to conflict resolution.\n"
"If you wish to commit it anyway, use:\n"
"Otherwise, please use 'git reset'\n"
msgstr ""
-#: builtin/commit.c:260
+#: builtin/commit.c:265
msgid "failed to unpack HEAD tree object"
msgstr ""
-#: builtin/commit.c:302
+#: builtin/commit.c:307
msgid "unable to create temporary index"
msgstr ""
-#: builtin/commit.c:308
+#: builtin/commit.c:313
msgid "interactive add failed"
msgstr ""
-#: builtin/commit.c:341 builtin/commit.c:362 builtin/commit.c:412
+#: builtin/commit.c:346 builtin/commit.c:367 builtin/commit.c:417
msgid "unable to write new_index file"
msgstr ""
-#: builtin/commit.c:393
+#: builtin/commit.c:398
msgid "cannot do a partial commit during a merge."
msgstr ""
-#: builtin/commit.c:395
+#: builtin/commit.c:400
msgid "cannot do a partial commit during a cherry-pick."
msgstr ""
-#: builtin/commit.c:405
+#: builtin/commit.c:410
msgid "cannot read the index"
msgstr ""
-#: builtin/commit.c:425
+#: builtin/commit.c:430
msgid "unable to write temporary index file"
msgstr ""
-#: builtin/commit.c:513 builtin/commit.c:519
+#: builtin/commit.c:521 builtin/commit.c:527
#, c-format
msgid "invalid commit: %s"
msgstr ""
-#: builtin/commit.c:542
+#: builtin/commit.c:549
msgid "malformed --author parameter"
msgstr ""
-#: builtin/commit.c:562
+#: builtin/commit.c:569
#, c-format
msgid "Malformed ident string: '%s'"
msgstr ""
-#: builtin/commit.c:600 builtin/commit.c:633 builtin/commit.c:956
+#: builtin/commit.c:607 builtin/commit.c:640 builtin/commit.c:963
#, c-format
msgid "could not lookup commit %s"
msgstr ""
-#: builtin/commit.c:612 builtin/shortlog.c:270
+#: builtin/commit.c:619 builtin/shortlog.c:271
#, c-format
msgid "(reading log message from standard input)\n"
msgstr ""
-#: builtin/commit.c:614
+#: builtin/commit.c:621
msgid "could not read log from standard input"
msgstr ""
-#: builtin/commit.c:618
+#: builtin/commit.c:625
#, c-format
msgid "could not read log file '%s'"
msgstr ""
-#: builtin/commit.c:624
+#: builtin/commit.c:631
msgid "commit has empty message"
msgstr ""
-#: builtin/commit.c:640
+#: builtin/commit.c:647
msgid "could not read MERGE_MSG"
msgstr ""
-#: builtin/commit.c:644
+#: builtin/commit.c:651
msgid "could not read SQUASH_MSG"
msgstr ""
-#: builtin/commit.c:648
+#: builtin/commit.c:655
#, c-format
msgid "could not read '%s'"
msgstr ""
-#: builtin/commit.c:709
+#: builtin/commit.c:716
msgid "could not write commit template"
msgstr ""
-#: builtin/commit.c:720
+#: builtin/commit.c:727
#, c-format
msgid ""
"\n"
"and try again.\n"
msgstr ""
-#: builtin/commit.c:725
+#: builtin/commit.c:732
#, c-format
msgid ""
"\n"
"and try again.\n"
msgstr ""
-#: builtin/commit.c:737
+#: builtin/commit.c:744
#, c-format
msgid ""
"Please enter the commit message for your changes. Lines starting\n"
"with '%c' will be ignored, and an empty message aborts the commit.\n"
msgstr ""
-#: builtin/commit.c:742
+#: builtin/commit.c:749
#, c-format
msgid ""
"Please enter the commit message for your changes. Lines starting\n"
"An empty message aborts the commit.\n"
msgstr ""
-#: builtin/commit.c:755
+#: builtin/commit.c:762
#, c-format
msgid "%sAuthor: %s"
msgstr ""
-#: builtin/commit.c:762
+#: builtin/commit.c:769
#, c-format
msgid "%sCommitter: %s"
msgstr ""
-#: builtin/commit.c:782
+#: builtin/commit.c:789
msgid "Cannot read index"
msgstr ""
-#: builtin/commit.c:819
+#: builtin/commit.c:826
msgid "Error building trees"
msgstr ""
-#: builtin/commit.c:834 builtin/tag.c:359
+#: builtin/commit.c:841 builtin/tag.c:359
#, c-format
msgid "Please supply the message using either -m or -F option.\n"
msgstr ""
-#: builtin/commit.c:931
+#: builtin/commit.c:938
#, c-format
msgid "No existing author found with '%s'"
msgstr ""
-#: builtin/commit.c:946 builtin/commit.c:1140
+#: builtin/commit.c:953 builtin/commit.c:1189
#, c-format
msgid "Invalid untracked files mode '%s'"
msgstr ""
-#: builtin/commit.c:976
+#: builtin/commit.c:990
+msgid "--long and -z are incompatible"
+msgstr ""
+
+#: builtin/commit.c:1020
msgid "Using both --reset-author and --author does not make sense"
msgstr ""
-#: builtin/commit.c:987
+#: builtin/commit.c:1031
msgid "You have nothing to amend."
msgstr ""
-#: builtin/commit.c:990
+#: builtin/commit.c:1034
msgid "You are in the middle of a merge -- cannot amend."
msgstr ""
-#: builtin/commit.c:992
+#: builtin/commit.c:1036
msgid "You are in the middle of a cherry-pick -- cannot amend."
msgstr ""
-#: builtin/commit.c:995
+#: builtin/commit.c:1039
msgid "Options --squash and --fixup cannot be used together"
msgstr ""
-#: builtin/commit.c:1005
+#: builtin/commit.c:1049
msgid "Only one of -c/-C/-F/--fixup can be used."
msgstr ""
-#: builtin/commit.c:1007
+#: builtin/commit.c:1051
msgid "Option -m cannot be combined with -c/-C/-F/--fixup."
msgstr ""
-#: builtin/commit.c:1015
+#: builtin/commit.c:1059
msgid "--reset-author can be used only with -C, -c or --amend."
msgstr ""
-#: builtin/commit.c:1032
+#: builtin/commit.c:1076
msgid "Only one of --include/--only/--all/--interactive/--patch can be used."
msgstr ""
-#: builtin/commit.c:1034
+#: builtin/commit.c:1078
msgid "No paths with --include/--only does not make sense."
msgstr ""
-#: builtin/commit.c:1036
+#: builtin/commit.c:1080
msgid "Clever... amending the last one with dirty index."
msgstr ""
-#: builtin/commit.c:1038
+#: builtin/commit.c:1082
msgid "Explicit paths specified without -i nor -o; assuming --only paths..."
msgstr ""
-#: builtin/commit.c:1048 builtin/tag.c:575
+#: builtin/commit.c:1092 builtin/tag.c:575
#, c-format
msgid "Invalid cleanup mode %s"
msgstr ""
-#: builtin/commit.c:1053
+#: builtin/commit.c:1097
msgid "Paths with -a does not make sense."
msgstr ""
-#: builtin/commit.c:1059 builtin/commit.c:1194
-msgid "--long and -z are incompatible"
-msgstr ""
-
-#: builtin/commit.c:1154 builtin/commit.c:1390
+#: builtin/commit.c:1203 builtin/commit.c:1436
msgid "show status concisely"
msgstr ""
-#: builtin/commit.c:1156 builtin/commit.c:1392
+#: builtin/commit.c:1205 builtin/commit.c:1438
msgid "show branch information"
msgstr ""
-#: builtin/commit.c:1158 builtin/commit.c:1394 builtin/push.c:426
+#: builtin/commit.c:1207 builtin/commit.c:1440 builtin/push.c:452
msgid "machine-readable output"
msgstr ""
-#: builtin/commit.c:1161 builtin/commit.c:1396
+#: builtin/commit.c:1210 builtin/commit.c:1442
msgid "show status in long format (default)"
msgstr ""
-#: builtin/commit.c:1164 builtin/commit.c:1399
+#: builtin/commit.c:1213 builtin/commit.c:1445
msgid "terminate entries with NUL"
msgstr ""
-#: builtin/commit.c:1166 builtin/commit.c:1402 builtin/fast-export.c:659
-#: builtin/fast-export.c:662 builtin/tag.c:459
+#: builtin/commit.c:1215 builtin/commit.c:1448 builtin/fast-export.c:667
+#: builtin/fast-export.c:670 builtin/tag.c:459
msgid "mode"
msgstr ""
-#: builtin/commit.c:1167 builtin/commit.c:1402
+#: builtin/commit.c:1216 builtin/commit.c:1448
msgid "show untracked files, optional modes: all, normal, no. (Default: all)"
msgstr ""
-#: builtin/commit.c:1170
+#: builtin/commit.c:1219
msgid "show ignored files"
msgstr ""
-#: builtin/commit.c:1171 parse-options.h:151
+#: builtin/commit.c:1220 parse-options.h:154
msgid "when"
msgstr ""
-#: builtin/commit.c:1172
+#: builtin/commit.c:1221
msgid ""
"ignore changes to submodules, optional when: all, dirty, untracked. "
"(Default: all)"
msgstr ""
-#: builtin/commit.c:1174
+#: builtin/commit.c:1223
msgid "list untracked files in columns"
msgstr ""
-#: builtin/commit.c:1248
+#: builtin/commit.c:1294
msgid "couldn't look up newly created commit"
msgstr ""
-#: builtin/commit.c:1250
+#: builtin/commit.c:1296
msgid "could not parse newly created commit"
msgstr ""
-#: builtin/commit.c:1291
+#: builtin/commit.c:1337
msgid "detached HEAD"
msgstr ""
-#: builtin/commit.c:1293
+#: builtin/commit.c:1339
msgid " (root-commit)"
msgstr ""
-#: builtin/commit.c:1360
+#: builtin/commit.c:1406
msgid "suppress summary after successful commit"
msgstr ""
-#: builtin/commit.c:1361
+#: builtin/commit.c:1407
msgid "show diff in commit message template"
msgstr ""
-#: builtin/commit.c:1363
+#: builtin/commit.c:1409
msgid "Commit message options"
msgstr ""
-#: builtin/commit.c:1364 builtin/tag.c:457
+#: builtin/commit.c:1410 builtin/tag.c:457
msgid "read message from file"
msgstr ""
-#: builtin/commit.c:1365
+#: builtin/commit.c:1411
msgid "author"
msgstr ""
-#: builtin/commit.c:1365
+#: builtin/commit.c:1411
msgid "override author for commit"
msgstr ""
-#: builtin/commit.c:1366 builtin/gc.c:178
+#: builtin/commit.c:1412 builtin/gc.c:178
msgid "date"
msgstr ""
-#: builtin/commit.c:1366
+#: builtin/commit.c:1412
msgid "override date for commit"
msgstr ""
-#: builtin/commit.c:1367 builtin/merge.c:208 builtin/notes.c:533
-#: builtin/notes.c:690 builtin/tag.c:455
+#: builtin/commit.c:1413 builtin/merge.c:223 builtin/notes.c:405
+#: builtin/notes.c:562 builtin/tag.c:455
msgid "message"
msgstr ""
-#: builtin/commit.c:1367
+#: builtin/commit.c:1413
msgid "commit message"
msgstr ""
-#: builtin/commit.c:1368
+#: builtin/commit.c:1414
msgid "reuse and edit message from specified commit"
msgstr ""
-#: builtin/commit.c:1369
+#: builtin/commit.c:1415
msgid "reuse message from specified commit"
msgstr ""
-#: builtin/commit.c:1370
+#: builtin/commit.c:1416
msgid "use autosquash formatted message to fixup specified commit"
msgstr ""
-#: builtin/commit.c:1371
+#: builtin/commit.c:1417
msgid "use autosquash formatted message to squash specified commit"
msgstr ""
-#: builtin/commit.c:1372
+#: builtin/commit.c:1418
msgid "the commit is authored by me now (used with -C/-c/--amend)"
msgstr ""
-#: builtin/commit.c:1373 builtin/log.c:1113 builtin/revert.c:109
+#: builtin/commit.c:1419 builtin/log.c:1160 builtin/revert.c:111
msgid "add Signed-off-by:"
msgstr ""
-#: builtin/commit.c:1374
+#: builtin/commit.c:1420
msgid "use specified template file"
msgstr ""
-#: builtin/commit.c:1375
+#: builtin/commit.c:1421
msgid "force edit of commit"
msgstr ""
-#: builtin/commit.c:1376
+#: builtin/commit.c:1422
msgid "default"
msgstr ""
-#: builtin/commit.c:1376 builtin/tag.c:460
+#: builtin/commit.c:1422 builtin/tag.c:460
msgid "how to strip spaces and #comments from message"
msgstr ""
-#: builtin/commit.c:1377
+#: builtin/commit.c:1423
msgid "include status in commit message template"
msgstr ""
-#: builtin/commit.c:1378 builtin/merge.c:215 builtin/tag.c:461
+#: builtin/commit.c:1424 builtin/merge.c:230 builtin/tag.c:461
msgid "key id"
msgstr ""
-#: builtin/commit.c:1379 builtin/merge.c:216
+#: builtin/commit.c:1425 builtin/merge.c:231
msgid "GPG sign commit"
msgstr ""
#. end commit message options
-#: builtin/commit.c:1382
+#: builtin/commit.c:1428
msgid "Commit contents options"
msgstr ""
-#: builtin/commit.c:1383
+#: builtin/commit.c:1429
msgid "commit all changed files"
msgstr ""
-#: builtin/commit.c:1384
+#: builtin/commit.c:1430
msgid "add specified files to index for commit"
msgstr ""
-#: builtin/commit.c:1385
+#: builtin/commit.c:1431
msgid "interactively add files"
msgstr ""
-#: builtin/commit.c:1386
+#: builtin/commit.c:1432
msgid "interactively add changes"
msgstr ""
-#: builtin/commit.c:1387
+#: builtin/commit.c:1433
msgid "commit only specified files"
msgstr ""
-#: builtin/commit.c:1388
+#: builtin/commit.c:1434
msgid "bypass pre-commit hook"
msgstr ""
-#: builtin/commit.c:1389
+#: builtin/commit.c:1435
msgid "show what would be committed"
msgstr ""
-#: builtin/commit.c:1400
+#: builtin/commit.c:1446
msgid "amend previous commit"
msgstr ""
-#: builtin/commit.c:1401
+#: builtin/commit.c:1447
msgid "bypass post-rewrite hook"
msgstr ""
-#: builtin/commit.c:1406
+#: builtin/commit.c:1452
msgid "ok to record an empty change"
msgstr ""
-#: builtin/commit.c:1409
+#: builtin/commit.c:1455
msgid "ok to record a change with an empty message"
msgstr ""
-#: builtin/commit.c:1441
+#: builtin/commit.c:1488
msgid "could not parse HEAD commit"
msgstr ""
-#: builtin/commit.c:1479 builtin/merge.c:510
+#: builtin/commit.c:1526 builtin/merge.c:525
#, c-format
msgid "could not open '%s' for reading"
msgstr ""
-#: builtin/commit.c:1486
+#: builtin/commit.c:1533
#, c-format
msgid "Corrupt MERGE_HEAD file (%s)"
msgstr ""
-#: builtin/commit.c:1493
+#: builtin/commit.c:1540
msgid "could not read MERGE_MODE"
msgstr ""
-#: builtin/commit.c:1512
+#: builtin/commit.c:1559
#, c-format
msgid "could not read commit message: %s"
msgstr ""
-#: builtin/commit.c:1526
+#: builtin/commit.c:1573
#, c-format
msgid "Aborting commit; you did not edit the message.\n"
msgstr ""
-#: builtin/commit.c:1531
+#: builtin/commit.c:1578
#, c-format
msgid "Aborting commit due to empty commit message.\n"
msgstr ""
-#: builtin/commit.c:1546 builtin/merge.c:847 builtin/merge.c:872
+#: builtin/commit.c:1593 builtin/merge.c:861 builtin/merge.c:886
msgid "failed to write commit object"
msgstr ""
-#: builtin/commit.c:1567
+#: builtin/commit.c:1614
msgid "cannot lock HEAD ref"
msgstr ""
-#: builtin/commit.c:1571
+#: builtin/commit.c:1618
msgid "cannot update HEAD ref"
msgstr ""
-#: builtin/commit.c:1582
+#: builtin/commit.c:1629
msgid ""
"Repository has been updated, but unable to write\n"
"new_index file. Check that disk is not full or quota is\n"
msgid "git config [options]"
msgstr ""
-#: builtin/config.c:51
+#: builtin/config.c:52
msgid "Config file location"
msgstr ""
-#: builtin/config.c:52
+#: builtin/config.c:53
msgid "use global config file"
msgstr ""
-#: builtin/config.c:53
+#: builtin/config.c:54
msgid "use system config file"
msgstr ""
-#: builtin/config.c:54
+#: builtin/config.c:55
msgid "use repository config file"
msgstr ""
-#: builtin/config.c:55
+#: builtin/config.c:56
msgid "use given config file"
msgstr ""
-#: builtin/config.c:56
-msgid "Action"
+#: builtin/config.c:57
+msgid "blob-id"
msgstr ""
#: builtin/config.c:57
-msgid "get value: name [value-regex]"
+msgid "read config from given blob object"
msgstr ""
#: builtin/config.c:58
-msgid "get all values: key [value-regex]"
+msgid "Action"
msgstr ""
#: builtin/config.c:59
-msgid "get values for regexp: name-regex [value-regex]"
+msgid "get value: name [value-regex]"
msgstr ""
#: builtin/config.c:60
-msgid "replace all matching variables: name value [value_regex]"
+msgid "get all values: key [value-regex]"
msgstr ""
#: builtin/config.c:61
-msgid "add a new variable: name value"
+msgid "get values for regexp: name-regex [value-regex]"
msgstr ""
#: builtin/config.c:62
-msgid "remove a variable: name [value-regex]"
+msgid "replace all matching variables: name value [value_regex]"
msgstr ""
#: builtin/config.c:63
-msgid "remove all matches: name [value-regex]"
+msgid "add a new variable: name value"
msgstr ""
#: builtin/config.c:64
-msgid "rename section: old-name new-name"
+msgid "remove a variable: name [value-regex]"
msgstr ""
#: builtin/config.c:65
-msgid "remove a section: name"
+msgid "remove all matches: name [value-regex]"
msgstr ""
#: builtin/config.c:66
-msgid "list all"
+msgid "rename section: old-name new-name"
msgstr ""
#: builtin/config.c:67
+msgid "remove a section: name"
+msgstr ""
+
+#: builtin/config.c:68
+msgid "list all"
+msgstr ""
+
+#: builtin/config.c:69
msgid "open an editor"
msgstr ""
-#: builtin/config.c:68 builtin/config.c:69
+#: builtin/config.c:70 builtin/config.c:71
msgid "slot"
msgstr ""
-#: builtin/config.c:68
+#: builtin/config.c:70
msgid "find the color configured: [default]"
msgstr ""
-#: builtin/config.c:69
+#: builtin/config.c:71
msgid "find the color setting: [stdout-is-tty]"
msgstr ""
-#: builtin/config.c:70
+#: builtin/config.c:72
msgid "Type"
msgstr ""
-#: builtin/config.c:71
+#: builtin/config.c:73
msgid "value is \"true\" or \"false\""
msgstr ""
-#: builtin/config.c:72
+#: builtin/config.c:74
msgid "value is decimal number"
msgstr ""
-#: builtin/config.c:73
+#: builtin/config.c:75
msgid "value is --bool or --int"
msgstr ""
-#: builtin/config.c:74
+#: builtin/config.c:76
msgid "value is a path (file or directory name)"
msgstr ""
-#: builtin/config.c:75
+#: builtin/config.c:77
msgid "Other"
msgstr ""
-#: builtin/config.c:76
+#: builtin/config.c:78
msgid "terminate values with NUL byte"
msgstr ""
-#: builtin/config.c:77
+#: builtin/config.c:79
msgid "respect include directives on lookup"
msgstr ""
msgid "print sizes in human readable format"
msgstr ""
-#: builtin/describe.c:15
+#: builtin/describe.c:16
msgid "git describe [options] <committish>*"
msgstr ""
-#: builtin/describe.c:16
+#: builtin/describe.c:17
msgid "git describe [options] --dirty"
msgstr ""
-#: builtin/describe.c:233
+#: builtin/describe.c:237
#, c-format
msgid "annotated tag %s not available"
msgstr ""
-#: builtin/describe.c:237
+#: builtin/describe.c:241
#, c-format
msgid "annotated tag %s has no embedded name"
msgstr ""
-#: builtin/describe.c:239
+#: builtin/describe.c:243
#, c-format
msgid "tag '%s' is really '%s' here"
msgstr ""
-#: builtin/describe.c:266
+#: builtin/describe.c:270
#, c-format
msgid "Not a valid object name %s"
msgstr ""
-#: builtin/describe.c:269
+#: builtin/describe.c:273
#, c-format
msgid "%s is not a valid '%s' object"
msgstr ""
-#: builtin/describe.c:286
+#: builtin/describe.c:290
#, c-format
msgid "no tag exactly matches '%s'"
msgstr ""
-#: builtin/describe.c:288
+#: builtin/describe.c:292
#, c-format
msgid "searching to describe %s\n"
msgstr ""
-#: builtin/describe.c:328
+#: builtin/describe.c:332
#, c-format
msgid "finished search at %s\n"
msgstr ""
-#: builtin/describe.c:352
+#: builtin/describe.c:359
#, c-format
msgid ""
"No annotated tags can describe '%s'.\n"
"However, there were unannotated tags: try --tags."
msgstr ""
-#: builtin/describe.c:356
+#: builtin/describe.c:363
#, c-format
msgid ""
"No tags can describe '%s'.\n"
"Try --always, or create some tags."
msgstr ""
-#: builtin/describe.c:377
+#: builtin/describe.c:384
#, c-format
msgid "traversed %lu commits\n"
msgstr ""
-#: builtin/describe.c:380
+#: builtin/describe.c:387
#, c-format
msgid ""
"more than %i tags found; listed %i most recent\n"
"gave up search at %s\n"
msgstr ""
-#: builtin/describe.c:402
+#: builtin/describe.c:409
msgid "find the tag that comes after the commit"
msgstr ""
-#: builtin/describe.c:403
+#: builtin/describe.c:410
msgid "debug search strategy on stderr"
msgstr ""
-#: builtin/describe.c:404
+#: builtin/describe.c:411
msgid "use any ref"
msgstr ""
-#: builtin/describe.c:405
+#: builtin/describe.c:412
msgid "use any tag, even unannotated"
msgstr ""
-#: builtin/describe.c:406
+#: builtin/describe.c:413
msgid "always use long format"
msgstr ""
-#: builtin/describe.c:409
+#: builtin/describe.c:414
+msgid "only follow first parent"
+msgstr ""
+
+#: builtin/describe.c:417
msgid "only output exact matches"
msgstr ""
-#: builtin/describe.c:411
+#: builtin/describe.c:419
msgid "consider <n> most recent tags (default: 10)"
msgstr ""
-#: builtin/describe.c:413
+#: builtin/describe.c:421
msgid "only consider tags matching <pattern>"
msgstr ""
-#: builtin/describe.c:415 builtin/name-rev.c:238
+#: builtin/describe.c:423 builtin/name-rev.c:322
msgid "show abbreviated commit object as fallback"
msgstr ""
-#: builtin/describe.c:416
+#: builtin/describe.c:424
msgid "mark"
msgstr ""
-#: builtin/describe.c:417
+#: builtin/describe.c:425
msgid "append <mark> on dirty working tree (default: \"-dirty\")"
msgstr ""
-#: builtin/describe.c:435
+#: builtin/describe.c:443
msgid "--long is incompatible with --abbrev=0"
msgstr ""
-#: builtin/describe.c:461
+#: builtin/describe.c:469
msgid "No names found, cannot describe anything."
msgstr ""
-#: builtin/describe.c:481
+#: builtin/describe.c:489
msgid "--dirty is incompatible with committishes"
msgstr ""
msgid "'%s': not a regular file or symlink"
msgstr ""
-#: builtin/diff.c:228
+#: builtin/diff.c:230
#, c-format
msgid "invalid option: %s"
msgstr ""
-#: builtin/diff.c:305
+#: builtin/diff.c:307
msgid "Not a git repository"
msgstr ""
-#: builtin/diff.c:348
+#: builtin/diff.c:350
#, c-format
msgid "invalid object '%s' given."
msgstr ""
-#: builtin/diff.c:353
-#, c-format
-msgid "more than %d trees given: '%s'"
-msgstr ""
-
-#: builtin/diff.c:363
+#: builtin/diff.c:359
#, c-format
msgid "more than two blobs given: '%s'"
msgstr ""
-#: builtin/diff.c:371
+#: builtin/diff.c:366
#, c-format
msgid "unhandled object '%s' given."
msgstr ""
msgid "git fast-export [rev-list-opts]"
msgstr ""
-#: builtin/fast-export.c:658
+#: builtin/fast-export.c:666
msgid "show progress after <n> objects"
msgstr ""
-#: builtin/fast-export.c:660
+#: builtin/fast-export.c:668
msgid "select handling of signed tags"
msgstr ""
-#: builtin/fast-export.c:663
+#: builtin/fast-export.c:671
msgid "select handling of tags that tag filtered objects"
msgstr ""
-#: builtin/fast-export.c:666
+#: builtin/fast-export.c:674
msgid "Dump marks to this file"
msgstr ""
-#: builtin/fast-export.c:668
+#: builtin/fast-export.c:676
msgid "Import marks from this file"
msgstr ""
-#: builtin/fast-export.c:670
+#: builtin/fast-export.c:678
msgid "Fake a tagger when tags lack one"
msgstr ""
-#: builtin/fast-export.c:672
+#: builtin/fast-export.c:680
msgid "Output full tree for each commit"
msgstr ""
-#: builtin/fast-export.c:674
+#: builtin/fast-export.c:682
msgid "Use the done feature to terminate the stream"
msgstr ""
-#: builtin/fast-export.c:675
+#: builtin/fast-export.c:683
msgid "Skip output of blob data"
msgstr ""
msgid "convert to a complete repository"
msgstr ""
-#: builtin/fetch.c:88 builtin/log.c:1130
+#: builtin/fetch.c:88 builtin/log.c:1177
msgid "dir"
msgstr ""
msgid "default mode for recursion"
msgstr ""
-#: builtin/fetch.c:204
+#: builtin/fetch.c:220
msgid "Couldn't find remote ref HEAD"
msgstr ""
-#: builtin/fetch.c:257
+#: builtin/fetch.c:273
#, c-format
msgid "object %s not found"
msgstr ""
-#: builtin/fetch.c:262
+#: builtin/fetch.c:278
msgid "[up to date]"
msgstr ""
-#: builtin/fetch.c:276
+#: builtin/fetch.c:292
#, c-format
msgid "! %-*s %-*s -> %s (can't fetch in current branch)"
msgstr ""
-#: builtin/fetch.c:277 builtin/fetch.c:363
+#: builtin/fetch.c:293 builtin/fetch.c:379
msgid "[rejected]"
msgstr ""
-#: builtin/fetch.c:288
+#: builtin/fetch.c:304
msgid "[tag update]"
msgstr ""
-#: builtin/fetch.c:290 builtin/fetch.c:325 builtin/fetch.c:343
+#: builtin/fetch.c:306 builtin/fetch.c:341 builtin/fetch.c:359
msgid " (unable to update local ref)"
msgstr ""
-#: builtin/fetch.c:308
+#: builtin/fetch.c:324
msgid "[new tag]"
msgstr ""
-#: builtin/fetch.c:311
+#: builtin/fetch.c:327
msgid "[new branch]"
msgstr ""
-#: builtin/fetch.c:314
+#: builtin/fetch.c:330
msgid "[new ref]"
msgstr ""
-#: builtin/fetch.c:359
+#: builtin/fetch.c:375
msgid "unable to update local ref"
msgstr ""
-#: builtin/fetch.c:359
+#: builtin/fetch.c:375
msgid "forced update"
msgstr ""
-#: builtin/fetch.c:365
+#: builtin/fetch.c:381
msgid "(non-fast-forward)"
msgstr ""
-#: builtin/fetch.c:396 builtin/fetch.c:688
+#: builtin/fetch.c:412 builtin/fetch.c:718
#, c-format
msgid "cannot open %s: %s\n"
msgstr ""
-#: builtin/fetch.c:405
+#: builtin/fetch.c:421
#, c-format
msgid "%s did not send all necessary objects\n"
msgstr ""
-#: builtin/fetch.c:491
+#: builtin/fetch.c:520
#, c-format
msgid "From %.*s\n"
msgstr ""
-#: builtin/fetch.c:502
+#: builtin/fetch.c:531
#, c-format
msgid ""
"some local refs could not be updated; try running\n"
" 'git remote prune %s' to remove any old, conflicting branches"
msgstr ""
-#: builtin/fetch.c:552
+#: builtin/fetch.c:581
#, c-format
msgid " (%s will become dangling)"
msgstr ""
-#: builtin/fetch.c:553
+#: builtin/fetch.c:582
#, c-format
msgid " (%s has become dangling)"
msgstr ""
-#: builtin/fetch.c:560
+#: builtin/fetch.c:589
msgid "[deleted]"
msgstr ""
-#: builtin/fetch.c:561 builtin/remote.c:1055
+#: builtin/fetch.c:590 builtin/remote.c:1055
msgid "(none)"
msgstr ""
-#: builtin/fetch.c:678
+#: builtin/fetch.c:708
#, c-format
msgid "Refusing to fetch into current branch %s of non-bare repository"
msgstr ""
-#: builtin/fetch.c:712
+#: builtin/fetch.c:742
#, c-format
msgid "Don't know how to fetch from %s"
msgstr ""
-#: builtin/fetch.c:789
+#: builtin/fetch.c:823
#, c-format
msgid "Option \"%s\" value \"%s\" is not valid for %s"
msgstr ""
-#: builtin/fetch.c:792
+#: builtin/fetch.c:826
#, c-format
msgid "Option \"%s\" is ignored for %s\n"
msgstr ""
-#: builtin/fetch.c:894
+#: builtin/fetch.c:928
#, c-format
msgid "Fetching %s\n"
msgstr ""
-#: builtin/fetch.c:896 builtin/remote.c:100
+#: builtin/fetch.c:930 builtin/remote.c:100
#, c-format
msgid "Could not fetch %s"
msgstr ""
-#: builtin/fetch.c:915
+#: builtin/fetch.c:949
msgid ""
"No remote repository specified. Please, specify either a URL or a\n"
"remote name from which new revisions should be fetched."
msgstr ""
-#: builtin/fetch.c:935
+#: builtin/fetch.c:969
msgid "You need to specify a tag name."
msgstr ""
-#: builtin/fetch.c:981
+#: builtin/fetch.c:1015
msgid "--depth and --unshallow cannot be used together"
msgstr ""
-#: builtin/fetch.c:983
+#: builtin/fetch.c:1017
msgid "--unshallow on a complete repository does not make sense"
msgstr ""
-#: builtin/fetch.c:1002
+#: builtin/fetch.c:1036
msgid "fetch --all does not take a repository argument"
msgstr ""
-#: builtin/fetch.c:1004
+#: builtin/fetch.c:1038
msgid "fetch --all does not make sense with refspecs"
msgstr ""
-#: builtin/fetch.c:1015
+#: builtin/fetch.c:1049
#, c-format
msgid "No such remote or remote group: %s"
msgstr ""
-#: builtin/fetch.c:1023
+#: builtin/fetch.c:1057
msgid "Fetching a group and specifying refspecs does not make sense"
msgstr ""
msgid "git fmt-merge-msg [-m <message>] [--log[=<n>]|--no-log] [--file <file>]"
msgstr ""
-#: builtin/fmt-merge-msg.c:663 builtin/fmt-merge-msg.c:666 builtin/grep.c:701
-#: builtin/merge.c:188 builtin/show-branch.c:655 builtin/show-ref.c:175
-#: builtin/tag.c:446 parse-options.h:133 parse-options.h:239
+#: builtin/fmt-merge-msg.c:663 builtin/fmt-merge-msg.c:666 builtin/grep.c:700
+#: builtin/merge.c:203 builtin/show-branch.c:655 builtin/show-ref.c:179
+#: builtin/tag.c:446 parse-options.h:133 parse-options.h:243
msgid "n"
msgstr ""
msgid "grep: failed to create thread: %s"
msgstr ""
-#: builtin/grep.c:365
+#: builtin/grep.c:364
#, c-format
msgid "Failed to chdir: %s"
msgstr ""
-#: builtin/grep.c:443 builtin/grep.c:478
+#: builtin/grep.c:442 builtin/grep.c:477
#, c-format
msgid "unable to read tree (%s)"
msgstr ""
-#: builtin/grep.c:493
+#: builtin/grep.c:492
#, c-format
msgid "unable to grep from object of type %s"
msgstr ""
-#: builtin/grep.c:551
+#: builtin/grep.c:550
#, c-format
msgid "switch `%c' expects a numerical value"
msgstr ""
-#: builtin/grep.c:568
+#: builtin/grep.c:567
#, c-format
msgid "cannot open '%s'"
msgstr ""
-#: builtin/grep.c:643
+#: builtin/grep.c:642
msgid "search in index instead of in the work tree"
msgstr ""
-#: builtin/grep.c:645
+#: builtin/grep.c:644
msgid "find in contents not managed by git"
msgstr ""
-#: builtin/grep.c:647
+#: builtin/grep.c:646
msgid "search in both tracked and untracked files"
msgstr ""
-#: builtin/grep.c:649
+#: builtin/grep.c:648
msgid "search also in ignored files"
msgstr ""
-#: builtin/grep.c:652
+#: builtin/grep.c:651
msgid "show non-matching lines"
msgstr ""
-#: builtin/grep.c:654
+#: builtin/grep.c:653
msgid "case insensitive matching"
msgstr ""
-#: builtin/grep.c:656
+#: builtin/grep.c:655
msgid "match patterns only at word boundaries"
msgstr ""
-#: builtin/grep.c:658
+#: builtin/grep.c:657
msgid "process binary files as text"
msgstr ""
-#: builtin/grep.c:660
+#: builtin/grep.c:659
msgid "don't match patterns in binary files"
msgstr ""
-#: builtin/grep.c:663
+#: builtin/grep.c:662
msgid "descend at most <depth> levels"
msgstr ""
-#: builtin/grep.c:667
+#: builtin/grep.c:666
msgid "use extended POSIX regular expressions"
msgstr ""
-#: builtin/grep.c:670
+#: builtin/grep.c:669
msgid "use basic POSIX regular expressions (default)"
msgstr ""
-#: builtin/grep.c:673
+#: builtin/grep.c:672
msgid "interpret patterns as fixed strings"
msgstr ""
-#: builtin/grep.c:676
+#: builtin/grep.c:675
msgid "use Perl-compatible regular expressions"
msgstr ""
-#: builtin/grep.c:679
+#: builtin/grep.c:678
msgid "show line numbers"
msgstr ""
-#: builtin/grep.c:680
+#: builtin/grep.c:679
msgid "don't show filenames"
msgstr ""
-#: builtin/grep.c:681
+#: builtin/grep.c:680
msgid "show filenames"
msgstr ""
-#: builtin/grep.c:683
+#: builtin/grep.c:682
msgid "show filenames relative to top directory"
msgstr ""
-#: builtin/grep.c:685
+#: builtin/grep.c:684
msgid "show only filenames instead of matching lines"
msgstr ""
-#: builtin/grep.c:687
+#: builtin/grep.c:686
msgid "synonym for --files-with-matches"
msgstr ""
-#: builtin/grep.c:690
+#: builtin/grep.c:689
msgid "show only the names of files without match"
msgstr ""
-#: builtin/grep.c:692
+#: builtin/grep.c:691
msgid "print NUL after filenames"
msgstr ""
-#: builtin/grep.c:694
+#: builtin/grep.c:693
msgid "show the number of matches instead of matching lines"
msgstr ""
-#: builtin/grep.c:695
+#: builtin/grep.c:694
msgid "highlight matches"
msgstr ""
-#: builtin/grep.c:697
+#: builtin/grep.c:696
msgid "print empty line between matches from different files"
msgstr ""
-#: builtin/grep.c:699
+#: builtin/grep.c:698
msgid "show filename only once above matches from same file"
msgstr ""
-#: builtin/grep.c:702
+#: builtin/grep.c:701
msgid "show <n> context lines before and after matches"
msgstr ""
-#: builtin/grep.c:705
+#: builtin/grep.c:704
msgid "show <n> context lines before matches"
msgstr ""
-#: builtin/grep.c:707
+#: builtin/grep.c:706
msgid "show <n> context lines after matches"
msgstr ""
-#: builtin/grep.c:708
+#: builtin/grep.c:707
msgid "shortcut for -C NUM"
msgstr ""
-#: builtin/grep.c:711
+#: builtin/grep.c:710
msgid "show a line with the function name before matches"
msgstr ""
-#: builtin/grep.c:713
+#: builtin/grep.c:712
msgid "show the surrounding function"
msgstr ""
-#: builtin/grep.c:716
+#: builtin/grep.c:715
msgid "read patterns from file"
msgstr ""
-#: builtin/grep.c:718
+#: builtin/grep.c:717
msgid "match <pattern>"
msgstr ""
-#: builtin/grep.c:720
+#: builtin/grep.c:719
msgid "combine patterns specified with -e"
msgstr ""
-#: builtin/grep.c:732
+#: builtin/grep.c:731
msgid "indicate hit with exit status without output"
msgstr ""
-#: builtin/grep.c:734
+#: builtin/grep.c:733
msgid "show only matches from files that match all patterns"
msgstr ""
-#: builtin/grep.c:736
+#: builtin/grep.c:735
msgid "show parse tree for grep expression"
msgstr ""
-#: builtin/grep.c:740
+#: builtin/grep.c:739
msgid "pager"
msgstr ""
-#: builtin/grep.c:740
+#: builtin/grep.c:739
msgid "show matching files in the pager"
msgstr ""
-#: builtin/grep.c:743
+#: builtin/grep.c:742
msgid "allow calling of grep(1) (ignored by this build)"
msgstr ""
-#: builtin/grep.c:744 builtin/show-ref.c:184
+#: builtin/grep.c:743 builtin/show-ref.c:188
msgid "show usage"
msgstr ""
-#: builtin/grep.c:811
+#: builtin/grep.c:810
msgid "no pattern given."
msgstr ""
-#: builtin/grep.c:866
+#: builtin/grep.c:865
msgid "--open-files-in-pager only works on the worktree"
msgstr ""
-#: builtin/grep.c:889
+#: builtin/grep.c:888
msgid "--cached or --untracked cannot be used with --no-index."
msgstr ""
-#: builtin/grep.c:894
+#: builtin/grep.c:893
msgid "--no-index or --untracked cannot be used with revs."
msgstr ""
-#: builtin/grep.c:897
+#: builtin/grep.c:896
msgid "--[no-]exclude-standard cannot be used for tracked contents."
msgstr ""
-#: builtin/grep.c:905
+#: builtin/grep.c:904
msgid "both --cached and trees are given."
msgstr ""
msgid "process file as it were from this path"
msgstr ""
-#: builtin/help.c:43
+#: builtin/help.c:41
msgid "print all available commands"
msgstr ""
-#: builtin/help.c:44
+#: builtin/help.c:42
msgid "print list of useful guides"
msgstr ""
-#: builtin/help.c:45
+#: builtin/help.c:43
msgid "show man page"
msgstr ""
-#: builtin/help.c:46
+#: builtin/help.c:44
msgid "show manual in web browser"
msgstr ""
-#: builtin/help.c:48
+#: builtin/help.c:46
msgid "show info page"
msgstr ""
-#: builtin/help.c:54
+#: builtin/help.c:52
msgid "git help [--all] [--guides] [--man|--web|--info] [command]"
msgstr ""
-#: builtin/help.c:66
+#: builtin/help.c:64
#, c-format
msgid "unrecognized help format '%s'"
msgstr ""
-#: builtin/help.c:94
+#: builtin/help.c:92
msgid "Failed to start emacsclient."
msgstr ""
-#: builtin/help.c:107
+#: builtin/help.c:105
msgid "Failed to parse emacsclient version."
msgstr ""
-#: builtin/help.c:115
+#: builtin/help.c:113
#, c-format
msgid "emacsclient version '%d' too old (< 22)."
msgstr ""
-#: builtin/help.c:133 builtin/help.c:161 builtin/help.c:170 builtin/help.c:178
+#: builtin/help.c:131 builtin/help.c:159 builtin/help.c:168 builtin/help.c:176
#, c-format
msgid "failed to exec '%s': %s"
msgstr ""
-#: builtin/help.c:218
+#: builtin/help.c:216
#, c-format
msgid ""
"'%s': path for unsupported man viewer.\n"
"Please consider using 'man.<tool>.cmd' instead."
msgstr ""
-#: builtin/help.c:230
+#: builtin/help.c:228
#, c-format
msgid ""
"'%s': cmd for supported man viewer.\n"
"Please consider using 'man.<tool>.path' instead."
msgstr ""
-#: builtin/help.c:351
+#: builtin/help.c:349
#, c-format
msgid "'%s': unknown man viewer."
msgstr ""
-#: builtin/help.c:368
+#: builtin/help.c:366
msgid "no man viewer handled the request"
msgstr ""
-#: builtin/help.c:376
+#: builtin/help.c:374
msgid "no info viewer handled the request"
msgstr ""
-#: builtin/help.c:422
+#: builtin/help.c:420
msgid "Defining attributes per path"
msgstr ""
-#: builtin/help.c:423
+#: builtin/help.c:421
msgid "A Git glossary"
msgstr ""
-#: builtin/help.c:424
+#: builtin/help.c:422
msgid "Specifies intentionally untracked files to ignore"
msgstr ""
-#: builtin/help.c:425
+#: builtin/help.c:423
msgid "Defining submodule properties"
msgstr ""
-#: builtin/help.c:426
+#: builtin/help.c:424
msgid "Specifying revisions and ranges for Git"
msgstr ""
-#: builtin/help.c:427
+#: builtin/help.c:425
msgid "A tutorial introduction to Git (for version 1.5.1 or newer)"
msgstr ""
-#: builtin/help.c:428
+#: builtin/help.c:426
msgid "An overview of recommended workflows with Git"
msgstr ""
-#: builtin/help.c:440
+#: builtin/help.c:438
msgid "The common Git guides are:\n"
msgstr ""
-#: builtin/help.c:462 builtin/help.c:478
+#: builtin/help.c:460 builtin/help.c:476
#, c-format
msgid "usage: %s%s"
msgstr ""
-#: builtin/help.c:494
+#: builtin/help.c:492
#, c-format
msgid "`git %s' is aliased to `%s'"
msgstr ""
-#: builtin/index-pack.c:182
+#: builtin/index-pack.c:184
#, c-format
msgid "object type mismatch at %s"
msgstr ""
-#: builtin/index-pack.c:202
+#: builtin/index-pack.c:204
msgid "object of unexpected type"
msgstr ""
-#: builtin/index-pack.c:239
+#: builtin/index-pack.c:244
#, c-format
msgid "cannot fill %d byte"
msgid_plural "cannot fill %d bytes"
msgstr[0] ""
msgstr[1] ""
-#: builtin/index-pack.c:249
+#: builtin/index-pack.c:254
msgid "early EOF"
msgstr ""
-#: builtin/index-pack.c:250
+#: builtin/index-pack.c:255
msgid "read error on input"
msgstr ""
-#: builtin/index-pack.c:262
+#: builtin/index-pack.c:267
msgid "used more bytes than were available"
msgstr ""
-#: builtin/index-pack.c:269
+#: builtin/index-pack.c:274
msgid "pack too large for current definition of off_t"
msgstr ""
-#: builtin/index-pack.c:285
+#: builtin/index-pack.c:290
#, c-format
msgid "unable to create '%s'"
msgstr ""
-#: builtin/index-pack.c:290
+#: builtin/index-pack.c:295
#, c-format
msgid "cannot open packfile '%s'"
msgstr ""
-#: builtin/index-pack.c:304
+#: builtin/index-pack.c:309
msgid "pack signature mismatch"
msgstr ""
-#: builtin/index-pack.c:306
+#: builtin/index-pack.c:311
#, c-format
msgid "pack version %<PRIu32> unsupported"
msgstr ""
-#: builtin/index-pack.c:324
+#: builtin/index-pack.c:329
#, c-format
msgid "pack has bad object at offset %lu: %s"
msgstr ""
-#: builtin/index-pack.c:446
+#: builtin/index-pack.c:451
#, c-format
msgid "inflate returned %d"
msgstr ""
-#: builtin/index-pack.c:495
+#: builtin/index-pack.c:500
msgid "offset value overflow for delta base object"
msgstr ""
-#: builtin/index-pack.c:503
+#: builtin/index-pack.c:508
msgid "delta base offset is out of bound"
msgstr ""
-#: builtin/index-pack.c:511
+#: builtin/index-pack.c:516
#, c-format
msgid "unknown object type %d"
msgstr ""
-#: builtin/index-pack.c:542
+#: builtin/index-pack.c:547
msgid "cannot pread pack file"
msgstr ""
-#: builtin/index-pack.c:544
+#: builtin/index-pack.c:549
#, c-format
msgid "premature end of pack file, %lu byte missing"
msgid_plural "premature end of pack file, %lu bytes missing"
msgstr[0] ""
msgstr[1] ""
-#: builtin/index-pack.c:570
+#: builtin/index-pack.c:575
msgid "serious inflate inconsistency"
msgstr ""
-#: builtin/index-pack.c:661 builtin/index-pack.c:667 builtin/index-pack.c:690
-#: builtin/index-pack.c:724 builtin/index-pack.c:733
+#: builtin/index-pack.c:666 builtin/index-pack.c:672 builtin/index-pack.c:695
+#: builtin/index-pack.c:729 builtin/index-pack.c:738
#, c-format
msgid "SHA1 COLLISION FOUND WITH %s !"
msgstr ""
-#: builtin/index-pack.c:664 builtin/pack-objects.c:170
+#: builtin/index-pack.c:669 builtin/pack-objects.c:170
#: builtin/pack-objects.c:262
#, c-format
msgid "unable to read %s"
msgstr ""
-#: builtin/index-pack.c:730
+#: builtin/index-pack.c:735
#, c-format
msgid "cannot read existing object %s"
msgstr ""
-#: builtin/index-pack.c:744
+#: builtin/index-pack.c:749
#, c-format
msgid "invalid blob object %s"
msgstr ""
-#: builtin/index-pack.c:759
+#: builtin/index-pack.c:763
#, c-format
msgid "invalid %s"
msgstr ""
-#: builtin/index-pack.c:761
+#: builtin/index-pack.c:766
msgid "Error in object"
msgstr ""
-#: builtin/index-pack.c:763
+#: builtin/index-pack.c:768
#, c-format
msgid "Not all child objects of %s are reachable"
msgstr ""
-#: builtin/index-pack.c:833 builtin/index-pack.c:863
+#: builtin/index-pack.c:838 builtin/index-pack.c:868
msgid "failed to apply delta"
msgstr ""
-#: builtin/index-pack.c:1004
+#: builtin/index-pack.c:1009
msgid "Receiving objects"
msgstr ""
-#: builtin/index-pack.c:1004
+#: builtin/index-pack.c:1009
msgid "Indexing objects"
msgstr ""
-#: builtin/index-pack.c:1030
+#: builtin/index-pack.c:1035
msgid "pack is corrupted (SHA1 mismatch)"
msgstr ""
-#: builtin/index-pack.c:1035
+#: builtin/index-pack.c:1040
msgid "cannot fstat packfile"
msgstr ""
-#: builtin/index-pack.c:1038
+#: builtin/index-pack.c:1043
msgid "pack has junk at the end"
msgstr ""
-#: builtin/index-pack.c:1049
+#: builtin/index-pack.c:1054
msgid "confusion beyond insanity in parse_pack_objects()"
msgstr ""
-#: builtin/index-pack.c:1072
+#: builtin/index-pack.c:1077
msgid "Resolving deltas"
msgstr ""
-#: builtin/index-pack.c:1082
+#: builtin/index-pack.c:1087
#, c-format
msgid "unable to create thread: %s"
msgstr ""
-#: builtin/index-pack.c:1124
+#: builtin/index-pack.c:1129
msgid "confusion beyond insanity"
msgstr ""
-#: builtin/index-pack.c:1132
+#: builtin/index-pack.c:1137
#, c-format
msgid "completed with %d local objects"
msgstr ""
-#: builtin/index-pack.c:1142
+#: builtin/index-pack.c:1147
#, c-format
msgid "Unexpected tail checksum for %s (disk corruption?)"
msgstr ""
-#: builtin/index-pack.c:1146
+#: builtin/index-pack.c:1151
#, c-format
msgid "pack has %d unresolved delta"
msgid_plural "pack has %d unresolved deltas"
msgstr[0] ""
msgstr[1] ""
-#: builtin/index-pack.c:1171
+#: builtin/index-pack.c:1176
#, c-format
msgid "unable to deflate appended object (%d)"
msgstr ""
-#: builtin/index-pack.c:1250
+#: builtin/index-pack.c:1255
#, c-format
msgid "local object %s is corrupt"
msgstr ""
-#: builtin/index-pack.c:1274
+#: builtin/index-pack.c:1279
msgid "error while closing pack file"
msgstr ""
-#: builtin/index-pack.c:1287
+#: builtin/index-pack.c:1292
#, c-format
msgid "cannot write keep file '%s'"
msgstr ""
-#: builtin/index-pack.c:1295
+#: builtin/index-pack.c:1300
#, c-format
msgid "cannot close written keep file '%s'"
msgstr ""
-#: builtin/index-pack.c:1308
+#: builtin/index-pack.c:1313
msgid "cannot store pack file"
msgstr ""
-#: builtin/index-pack.c:1319
+#: builtin/index-pack.c:1324
msgid "cannot store index file"
msgstr ""
-#: builtin/index-pack.c:1352
+#: builtin/index-pack.c:1357
#, c-format
msgid "bad pack.indexversion=%<PRIu32>"
msgstr ""
-#: builtin/index-pack.c:1358
+#: builtin/index-pack.c:1363
#, c-format
msgid "invalid number of threads specified (%d)"
msgstr ""
-#: builtin/index-pack.c:1362 builtin/index-pack.c:1535
+#: builtin/index-pack.c:1367 builtin/index-pack.c:1545
#, c-format
msgid "no threads support, ignoring %s"
msgstr ""
-#: builtin/index-pack.c:1420
+#: builtin/index-pack.c:1425
#, c-format
msgid "Cannot open existing pack file '%s'"
msgstr ""
-#: builtin/index-pack.c:1422
+#: builtin/index-pack.c:1427
#, c-format
msgid "Cannot open existing pack idx file for '%s'"
msgstr ""
-#: builtin/index-pack.c:1469
+#: builtin/index-pack.c:1474
#, c-format
msgid "non delta: %d object"
msgid_plural "non delta: %d objects"
msgstr[0] ""
msgstr[1] ""
-#: builtin/index-pack.c:1476
+#: builtin/index-pack.c:1481
#, c-format
msgid "chain length = %d: %lu object"
msgid_plural "chain length = %d: %lu objects"
msgstr[0] ""
msgstr[1] ""
-#: builtin/index-pack.c:1503
+#: builtin/index-pack.c:1509
msgid "Cannot come back to cwd"
msgstr ""
-#: builtin/index-pack.c:1547 builtin/index-pack.c:1550
-#: builtin/index-pack.c:1562 builtin/index-pack.c:1566
+#: builtin/index-pack.c:1557 builtin/index-pack.c:1560
+#: builtin/index-pack.c:1572 builtin/index-pack.c:1576
#, c-format
msgid "bad %s"
msgstr ""
-#: builtin/index-pack.c:1580
+#: builtin/index-pack.c:1590
msgid "--fix-thin cannot be used without --stdin"
msgstr ""
-#: builtin/index-pack.c:1584 builtin/index-pack.c:1594
+#: builtin/index-pack.c:1594 builtin/index-pack.c:1604
#, c-format
msgid "packfile name '%s' does not end with '.pack'"
msgstr ""
-#: builtin/index-pack.c:1603
+#: builtin/index-pack.c:1613
msgid "--verify with no packfile name given"
msgstr ""
msgid "specify that the git repository is to be shared amongst several users"
msgstr ""
-#: builtin/init-db.c:493 builtin/prune-packed.c:77
+#: builtin/init-db.c:493 builtin/prune-packed.c:75
msgid "be quiet"
msgstr ""
msgid "Cannot access work tree '%s'"
msgstr ""
-#: builtin/log.c:40
+#: builtin/log.c:41
msgid "git log [<options>] [<revision range>] [[--] <path>...]\n"
msgstr ""
-#: builtin/log.c:41
+#: builtin/log.c:42
msgid " or: git show [options] <object>..."
msgstr ""
-#: builtin/log.c:103
+#: builtin/log.c:124
msgid "suppress diff output"
msgstr ""
-#: builtin/log.c:104
+#: builtin/log.c:125
msgid "show source"
msgstr ""
-#: builtin/log.c:105
+#: builtin/log.c:126
msgid "Use mail map file"
msgstr ""
-#: builtin/log.c:106
+#: builtin/log.c:127
msgid "decorate options"
msgstr ""
-#: builtin/log.c:199
+#: builtin/log.c:230
#, c-format
msgid "Final output: %d %s\n"
msgstr ""
-#: builtin/log.c:422 builtin/log.c:514
+#: builtin/log.c:453 builtin/log.c:545
#, c-format
msgid "Could not read object %s"
msgstr ""
-#: builtin/log.c:538
+#: builtin/log.c:569
#, c-format
msgid "Unknown type: %d"
msgstr ""
-#: builtin/log.c:638
+#: builtin/log.c:669
msgid "format.headers without value"
msgstr ""
-#: builtin/log.c:720
+#: builtin/log.c:751
msgid "name of output directory is too long"
msgstr ""
-#: builtin/log.c:736
+#: builtin/log.c:767
#, c-format
msgid "Cannot open patch file %s"
msgstr ""
-#: builtin/log.c:750
+#: builtin/log.c:781
msgid "Need exactly one range."
msgstr ""
-#: builtin/log.c:758
+#: builtin/log.c:789
msgid "Not a range."
msgstr ""
-#: builtin/log.c:860
+#: builtin/log.c:891
msgid "Cover letter needs email format"
msgstr ""
-#: builtin/log.c:936
+#: builtin/log.c:967
#, c-format
msgid "insane in-reply-to: %s"
msgstr ""
-#: builtin/log.c:964
+#: builtin/log.c:995
msgid "git format-patch [options] [<since> | <revision range>]"
msgstr ""
-#: builtin/log.c:1009
+#: builtin/log.c:1040
msgid "Two output directories?"
msgstr ""
-#: builtin/log.c:1108
+#: builtin/log.c:1155
msgid "use [PATCH n/m] even with a single patch"
msgstr ""
-#: builtin/log.c:1111
+#: builtin/log.c:1158
msgid "use [PATCH] even with multiple patches"
msgstr ""
-#: builtin/log.c:1115
+#: builtin/log.c:1162
msgid "print patches to standard out"
msgstr ""
-#: builtin/log.c:1117
+#: builtin/log.c:1164
msgid "generate a cover letter"
msgstr ""
-#: builtin/log.c:1119
+#: builtin/log.c:1166
msgid "use simple number sequence for output file names"
msgstr ""
-#: builtin/log.c:1120
+#: builtin/log.c:1167
msgid "sfx"
msgstr ""
-#: builtin/log.c:1121
+#: builtin/log.c:1168
msgid "use <sfx> instead of '.patch'"
msgstr ""
-#: builtin/log.c:1123
+#: builtin/log.c:1170
msgid "start numbering patches at <n> instead of 1"
msgstr ""
-#: builtin/log.c:1125
+#: builtin/log.c:1172
msgid "mark the series as Nth re-roll"
msgstr ""
-#: builtin/log.c:1127
+#: builtin/log.c:1174
msgid "Use [<prefix>] instead of [PATCH]"
msgstr ""
-#: builtin/log.c:1130
+#: builtin/log.c:1177
msgid "store resulting files in <dir>"
msgstr ""
-#: builtin/log.c:1133
+#: builtin/log.c:1180
msgid "don't strip/add [PATCH]"
msgstr ""
-#: builtin/log.c:1136
+#: builtin/log.c:1183
msgid "don't output binary diffs"
msgstr ""
-#: builtin/log.c:1138
+#: builtin/log.c:1185
msgid "don't include a patch matching a commit upstream"
msgstr ""
-#: builtin/log.c:1140
+#: builtin/log.c:1187
msgid "show patch format instead of default (patch + stat)"
msgstr ""
-#: builtin/log.c:1142
+#: builtin/log.c:1189
msgid "Messaging"
msgstr ""
-#: builtin/log.c:1143
+#: builtin/log.c:1190
msgid "header"
msgstr ""
-#: builtin/log.c:1144
+#: builtin/log.c:1191
msgid "add email header"
msgstr ""
-#: builtin/log.c:1145 builtin/log.c:1147
+#: builtin/log.c:1192 builtin/log.c:1194
msgid "email"
msgstr ""
-#: builtin/log.c:1145
+#: builtin/log.c:1192
msgid "add To: header"
msgstr ""
-#: builtin/log.c:1147
+#: builtin/log.c:1194
msgid "add Cc: header"
msgstr ""
-#: builtin/log.c:1149
+#: builtin/log.c:1196
+msgid "ident"
+msgstr ""
+
+#: builtin/log.c:1197
+msgid "set From address to <ident> (or committer ident if absent)"
+msgstr ""
+
+#: builtin/log.c:1199
msgid "message-id"
msgstr ""
-#: builtin/log.c:1150
+#: builtin/log.c:1200
msgid "make first mail a reply to <message-id>"
msgstr ""
-#: builtin/log.c:1151 builtin/log.c:1154
+#: builtin/log.c:1201 builtin/log.c:1204
msgid "boundary"
msgstr ""
-#: builtin/log.c:1152
+#: builtin/log.c:1202
msgid "attach the patch"
msgstr ""
-#: builtin/log.c:1155
+#: builtin/log.c:1205
msgid "inline the patch"
msgstr ""
-#: builtin/log.c:1159
+#: builtin/log.c:1209
msgid "enable message threading, styles: shallow, deep"
msgstr ""
-#: builtin/log.c:1161
+#: builtin/log.c:1211
msgid "signature"
msgstr ""
-#: builtin/log.c:1162
+#: builtin/log.c:1212
msgid "add a signature"
msgstr ""
-#: builtin/log.c:1164
+#: builtin/log.c:1214
msgid "don't print the patch filenames"
msgstr ""
-#: builtin/log.c:1248
+#: builtin/log.c:1288
+#, c-format
+msgid "invalid ident line: %s"
+msgstr ""
+
+#: builtin/log.c:1303
msgid "-n and -k are mutually exclusive."
msgstr ""
-#: builtin/log.c:1250
+#: builtin/log.c:1305
msgid "--subject-prefix and -k are mutually exclusive."
msgstr ""
-#: builtin/log.c:1258
+#: builtin/log.c:1313
msgid "--name-only does not make sense"
msgstr ""
-#: builtin/log.c:1260
+#: builtin/log.c:1315
msgid "--name-status does not make sense"
msgstr ""
-#: builtin/log.c:1262
+#: builtin/log.c:1317
msgid "--check does not make sense"
msgstr ""
-#: builtin/log.c:1285
+#: builtin/log.c:1340
msgid "standard output, or directory, which one?"
msgstr ""
-#: builtin/log.c:1287
+#: builtin/log.c:1342
#, c-format
msgid "Could not create directory '%s'"
msgstr ""
-#: builtin/log.c:1435
+#: builtin/log.c:1490
msgid "Failed to create output files"
msgstr ""
-#: builtin/log.c:1484
+#: builtin/log.c:1539
msgid "git cherry [-v] [<upstream> [<head> [<limit>]]]"
msgstr ""
-#: builtin/log.c:1539
+#: builtin/log.c:1594
#, c-format
msgid ""
"Could not find a tracked remote branch, please specify <upstream> manually.\n"
msgstr ""
-#: builtin/log.c:1552 builtin/log.c:1554 builtin/log.c:1566
+#: builtin/log.c:1607 builtin/log.c:1609 builtin/log.c:1621
#, c-format
msgid "Unknown commit %s"
msgstr ""
-#: builtin/ls-files.c:402
+#: builtin/ls-files.c:408
msgid "git ls-files [options] [<file>...]"
msgstr ""
-#: builtin/ls-files.c:459
+#: builtin/ls-files.c:465
msgid "identify the file status with tags"
msgstr ""
-#: builtin/ls-files.c:461
+#: builtin/ls-files.c:467
msgid "use lowercase letters for 'assume unchanged' files"
msgstr ""
-#: builtin/ls-files.c:463
+#: builtin/ls-files.c:469
msgid "show cached files in the output (default)"
msgstr ""
-#: builtin/ls-files.c:465
+#: builtin/ls-files.c:471
msgid "show deleted files in the output"
msgstr ""
-#: builtin/ls-files.c:467
+#: builtin/ls-files.c:473
msgid "show modified files in the output"
msgstr ""
-#: builtin/ls-files.c:469
+#: builtin/ls-files.c:475
msgid "show other files in the output"
msgstr ""
-#: builtin/ls-files.c:471
+#: builtin/ls-files.c:477
msgid "show ignored files in the output"
msgstr ""
-#: builtin/ls-files.c:474
+#: builtin/ls-files.c:480
msgid "show staged contents' object name in the output"
msgstr ""
-#: builtin/ls-files.c:476
+#: builtin/ls-files.c:482
msgid "show files on the filesystem that need to be removed"
msgstr ""
-#: builtin/ls-files.c:478
+#: builtin/ls-files.c:484
msgid "show 'other' directories' name only"
msgstr ""
-#: builtin/ls-files.c:481
+#: builtin/ls-files.c:487
msgid "don't show empty directories"
msgstr ""
-#: builtin/ls-files.c:484
+#: builtin/ls-files.c:490
msgid "show unmerged files in the output"
msgstr ""
-#: builtin/ls-files.c:486
+#: builtin/ls-files.c:492
msgid "show resolve-undo information"
msgstr ""
-#: builtin/ls-files.c:488
+#: builtin/ls-files.c:494
msgid "skip files matching pattern"
msgstr ""
-#: builtin/ls-files.c:491
+#: builtin/ls-files.c:497
msgid "exclude patterns are read from <file>"
msgstr ""
-#: builtin/ls-files.c:494
+#: builtin/ls-files.c:500
msgid "read additional per-directory exclude patterns in <file>"
msgstr ""
-#: builtin/ls-files.c:496
+#: builtin/ls-files.c:502
msgid "add the standard git exclusions"
msgstr ""
-#: builtin/ls-files.c:499
+#: builtin/ls-files.c:505
msgid "make the output relative to the project top directory"
msgstr ""
-#: builtin/ls-files.c:502
+#: builtin/ls-files.c:508
msgid "if any <file> is not in the index, treat this as an error"
msgstr ""
-#: builtin/ls-files.c:503
+#: builtin/ls-files.c:509
msgid "tree-ish"
msgstr ""
-#: builtin/ls-files.c:504
+#: builtin/ls-files.c:510
msgid "pretend that paths removed since <tree-ish> are still present"
msgstr ""
-#: builtin/ls-files.c:506
+#: builtin/ls-files.c:512
msgid "show debugging data"
msgstr ""
msgid "git merge --abort"
msgstr ""
-#: builtin/merge.c:90
+#: builtin/merge.c:98
msgid "switch `m' requires a value"
msgstr ""
-#: builtin/merge.c:127
+#: builtin/merge.c:135
#, c-format
msgid "Could not find merge strategy '%s'.\n"
msgstr ""
-#: builtin/merge.c:128
+#: builtin/merge.c:136
#, c-format
msgid "Available strategies are:"
msgstr ""
-#: builtin/merge.c:133
+#: builtin/merge.c:141
#, c-format
msgid "Available custom strategies are:"
msgstr ""
-#: builtin/merge.c:183
+#: builtin/merge.c:198
msgid "do not show a diffstat at the end of the merge"
msgstr ""
-#: builtin/merge.c:186
+#: builtin/merge.c:201
msgid "show a diffstat at the end of the merge"
msgstr ""
-#: builtin/merge.c:187
+#: builtin/merge.c:202
msgid "(synonym to --stat)"
msgstr ""
-#: builtin/merge.c:189
+#: builtin/merge.c:204
msgid "add (at most <n>) entries from shortlog to merge commit message"
msgstr ""
-#: builtin/merge.c:192
+#: builtin/merge.c:207
msgid "create a single commit instead of doing a merge"
msgstr ""
-#: builtin/merge.c:194
+#: builtin/merge.c:209
msgid "perform a commit if the merge succeeds (default)"
msgstr ""
-#: builtin/merge.c:196
+#: builtin/merge.c:211
msgid "edit message before committing"
msgstr ""
-#: builtin/merge.c:198
+#: builtin/merge.c:212
msgid "allow fast-forward (default)"
msgstr ""
-#: builtin/merge.c:200
+#: builtin/merge.c:214
msgid "abort if fast-forward is not possible"
msgstr ""
-#: builtin/merge.c:203
+#: builtin/merge.c:218
msgid "Verify that the named commit has a valid GPG signature"
msgstr ""
-#: builtin/merge.c:204 builtin/notes.c:866 builtin/revert.c:112
+#: builtin/merge.c:219 builtin/notes.c:738 builtin/revert.c:114
msgid "strategy"
msgstr ""
-#: builtin/merge.c:205
+#: builtin/merge.c:220
msgid "merge strategy to use"
msgstr ""
-#: builtin/merge.c:206
+#: builtin/merge.c:221
msgid "option=value"
msgstr ""
-#: builtin/merge.c:207
+#: builtin/merge.c:222
msgid "option for selected merge strategy"
msgstr ""
-#: builtin/merge.c:209
+#: builtin/merge.c:224
msgid "merge commit message (for a non-fast-forward merge)"
msgstr ""
-#: builtin/merge.c:213
+#: builtin/merge.c:228
msgid "abort the current in-progress merge"
msgstr ""
-#: builtin/merge.c:242
+#: builtin/merge.c:257
msgid "could not run stash."
msgstr ""
-#: builtin/merge.c:247
+#: builtin/merge.c:262
msgid "stash failed"
msgstr ""
-#: builtin/merge.c:252
+#: builtin/merge.c:267
#, c-format
msgid "not a valid object: %s"
msgstr ""
-#: builtin/merge.c:271 builtin/merge.c:288
+#: builtin/merge.c:286 builtin/merge.c:303
msgid "read-tree failed"
msgstr ""
-#: builtin/merge.c:318
+#: builtin/merge.c:333
msgid " (nothing to squash)"
msgstr ""
-#: builtin/merge.c:331
+#: builtin/merge.c:346
#, c-format
msgid "Squash commit -- not updating HEAD\n"
msgstr ""
-#: builtin/merge.c:363
+#: builtin/merge.c:378
msgid "Writing SQUASH_MSG"
msgstr ""
-#: builtin/merge.c:365
+#: builtin/merge.c:380
msgid "Finishing SQUASH_MSG"
msgstr ""
-#: builtin/merge.c:388
+#: builtin/merge.c:403
#, c-format
msgid "No merge message -- not updating HEAD\n"
msgstr ""
-#: builtin/merge.c:438
+#: builtin/merge.c:453
#, c-format
msgid "'%s' does not point to a commit"
msgstr ""
-#: builtin/merge.c:550
+#: builtin/merge.c:565
#, c-format
msgid "Bad branch.%s.mergeoptions string: %s"
msgstr ""
-#: builtin/merge.c:643
+#: builtin/merge.c:657
msgid "git write-tree failed to write a tree"
msgstr ""
-#: builtin/merge.c:671
+#: builtin/merge.c:685
msgid "Not handling anything other than two heads merge."
msgstr ""
-#: builtin/merge.c:685
+#: builtin/merge.c:699
#, c-format
msgid "Unknown option for merge-recursive: -X%s"
msgstr ""
-#: builtin/merge.c:699
+#: builtin/merge.c:713
#, c-format
msgid "unable to write %s"
msgstr ""
-#: builtin/merge.c:788
+#: builtin/merge.c:802
#, c-format
msgid "Could not read from '%s'"
msgstr ""
-#: builtin/merge.c:797
+#: builtin/merge.c:811
#, c-format
msgid "Not committing merge; use 'git commit' to complete the merge.\n"
msgstr ""
-#: builtin/merge.c:803
+#: builtin/merge.c:817
#, c-format
msgid ""
"Please enter a commit message to explain why this merge is necessary,\n"
"the commit.\n"
msgstr ""
-#: builtin/merge.c:827
+#: builtin/merge.c:841
msgid "Empty commit message."
msgstr ""
-#: builtin/merge.c:839
+#: builtin/merge.c:853
#, c-format
msgid "Wonderful.\n"
msgstr ""
-#: builtin/merge.c:904
+#: builtin/merge.c:918
#, c-format
msgid "Automatic merge failed; fix conflicts and then commit the result.\n"
msgstr ""
-#: builtin/merge.c:920
+#: builtin/merge.c:934
#, c-format
msgid "'%s' is not a commit"
msgstr ""
-#: builtin/merge.c:961
+#: builtin/merge.c:975
msgid "No current branch."
msgstr ""
-#: builtin/merge.c:963
+#: builtin/merge.c:977
msgid "No remote for the current branch."
msgstr ""
-#: builtin/merge.c:965
+#: builtin/merge.c:979
msgid "No default upstream defined for the current branch."
msgstr ""
-#: builtin/merge.c:970
+#: builtin/merge.c:984
#, c-format
-msgid "No remote tracking branch for %s from %s"
+msgid "No remote-tracking branch for %s from %s"
msgstr ""
-#: builtin/merge.c:1057 builtin/merge.c:1214
-#, c-format
-msgid "%s - not something we can merge"
-msgstr ""
-
-#: builtin/merge.c:1125
+#: builtin/merge.c:1140
msgid "There is no merge to abort (MERGE_HEAD missing)."
msgstr ""
-#: builtin/merge.c:1141 git-pull.sh:31
+#: builtin/merge.c:1156 git-pull.sh:31
msgid ""
"You have not concluded your merge (MERGE_HEAD exists).\n"
"Please, commit your changes before you can merge."
msgstr ""
-#: builtin/merge.c:1144 git-pull.sh:34
+#: builtin/merge.c:1159 git-pull.sh:34
msgid "You have not concluded your merge (MERGE_HEAD exists)."
msgstr ""
-#: builtin/merge.c:1148
+#: builtin/merge.c:1163
msgid ""
"You have not concluded your cherry-pick (CHERRY_PICK_HEAD exists).\n"
"Please, commit your changes before you can merge."
msgstr ""
-#: builtin/merge.c:1151
+#: builtin/merge.c:1166
msgid "You have not concluded your cherry-pick (CHERRY_PICK_HEAD exists)."
msgstr ""
-#: builtin/merge.c:1160
+#: builtin/merge.c:1175
msgid "You cannot combine --squash with --no-ff."
msgstr ""
-#: builtin/merge.c:1165
-msgid "You cannot combine --no-ff with --ff-only."
-msgstr ""
-
-#: builtin/merge.c:1172
+#: builtin/merge.c:1184
msgid "No commit specified and merge.defaultToUpstream not set."
msgstr ""
-#: builtin/merge.c:1204
+#: builtin/merge.c:1216
msgid "Can merge only exactly one commit into empty head"
msgstr ""
-#: builtin/merge.c:1207
+#: builtin/merge.c:1219
msgid "Squash commit into empty head not supported yet"
msgstr ""
-#: builtin/merge.c:1209
+#: builtin/merge.c:1221
msgid "Non-fast-forward commit does not make sense into an empty head"
msgstr ""
-#: builtin/merge.c:1265
+#: builtin/merge.c:1226
+#, c-format
+msgid "%s - not something we can merge"
+msgstr ""
+
+#: builtin/merge.c:1277
#, c-format
msgid "Commit %s has an untrusted GPG signature, allegedly by %s."
msgstr ""
-#: builtin/merge.c:1268
+#: builtin/merge.c:1280
#, c-format
msgid "Commit %s has a bad GPG signature allegedly by %s."
msgstr ""
#. 'N'
-#: builtin/merge.c:1271
+#: builtin/merge.c:1283
#, c-format
msgid "Commit %s does not have a GPG signature."
msgstr ""
-#: builtin/merge.c:1274
+#: builtin/merge.c:1286
#, c-format
msgid "Commit %s has a good GPG signature by %s\n"
msgstr ""
-#: builtin/merge.c:1358
+#: builtin/merge.c:1370
#, c-format
msgid "Updating %s..%s\n"
msgstr ""
-#: builtin/merge.c:1397
+#: builtin/merge.c:1409
#, c-format
msgid "Trying really trivial in-index merge...\n"
msgstr ""
-#: builtin/merge.c:1404
+#: builtin/merge.c:1416
#, c-format
msgid "Nope.\n"
msgstr ""
-#: builtin/merge.c:1436
+#: builtin/merge.c:1448
msgid "Not possible to fast-forward, aborting."
msgstr ""
-#: builtin/merge.c:1459 builtin/merge.c:1538
+#: builtin/merge.c:1471 builtin/merge.c:1550
#, c-format
msgid "Rewinding the tree to pristine...\n"
msgstr ""
-#: builtin/merge.c:1463
+#: builtin/merge.c:1475
#, c-format
msgid "Trying merge strategy %s...\n"
msgstr ""
-#: builtin/merge.c:1529
+#: builtin/merge.c:1541
#, c-format
msgid "No merge strategy handled the merge.\n"
msgstr ""
-#: builtin/merge.c:1531
+#: builtin/merge.c:1543
#, c-format
msgid "Merge with strategy %s failed.\n"
msgstr ""
-#: builtin/merge.c:1540
+#: builtin/merge.c:1552
#, c-format
msgid "Using the %s to prepare resolving by hand.\n"
msgstr ""
-#: builtin/merge.c:1552
+#: builtin/merge.c:1564
#, c-format
msgid "Automatic merge went well; stopped before committing as requested\n"
msgstr ""
msgid "renaming '%s' failed"
msgstr ""
-#: builtin/name-rev.c:175
+#: builtin/name-rev.c:259
msgid "git name-rev [options] <commit>..."
msgstr ""
-#: builtin/name-rev.c:176
+#: builtin/name-rev.c:260
msgid "git name-rev [options] --all"
msgstr ""
-#: builtin/name-rev.c:177
+#: builtin/name-rev.c:261
msgid "git name-rev [options] --stdin"
msgstr ""
-#: builtin/name-rev.c:229
+#: builtin/name-rev.c:313
msgid "print only names (no SHA-1)"
msgstr ""
-#: builtin/name-rev.c:230
+#: builtin/name-rev.c:314
msgid "only use tags to name the commits"
msgstr ""
-#: builtin/name-rev.c:232
+#: builtin/name-rev.c:316
msgid "only use refs matching <pattern>"
msgstr ""
-#: builtin/name-rev.c:234
+#: builtin/name-rev.c:318
msgid "list all commits reachable from all refs"
msgstr ""
-#: builtin/name-rev.c:235
+#: builtin/name-rev.c:319
msgid "read from stdin"
msgstr ""
-#: builtin/name-rev.c:236
+#: builtin/name-rev.c:320
msgid "allow to print `undefined` names"
msgstr ""
-#: builtin/notes.c:26
+#: builtin/name-rev.c:326
+msgid "dereference tags in the input (internal use)"
+msgstr ""
+
+#: builtin/notes.c:24
msgid "git notes [--ref <notes_ref>] [list [<object>]]"
msgstr ""
-#: builtin/notes.c:27
+#: builtin/notes.c:25
msgid ""
"git notes [--ref <notes_ref>] add [-f] [-m <msg> | -F <file> | (-c | -C) "
"<object>] [<object>]"
msgstr ""
-#: builtin/notes.c:28
+#: builtin/notes.c:26
msgid "git notes [--ref <notes_ref>] copy [-f] <from-object> <to-object>"
msgstr ""
-#: builtin/notes.c:29
+#: builtin/notes.c:27
msgid ""
"git notes [--ref <notes_ref>] append [-m <msg> | -F <file> | (-c | -C) "
"<object>] [<object>]"
msgstr ""
-#: builtin/notes.c:30
+#: builtin/notes.c:28
msgid "git notes [--ref <notes_ref>] edit [<object>]"
msgstr ""
-#: builtin/notes.c:31
+#: builtin/notes.c:29
msgid "git notes [--ref <notes_ref>] show [<object>]"
msgstr ""
-#: builtin/notes.c:32
+#: builtin/notes.c:30
msgid ""
"git notes [--ref <notes_ref>] merge [-v | -q] [-s <strategy> ] <notes_ref>"
msgstr ""
-#: builtin/notes.c:33
+#: builtin/notes.c:31
msgid "git notes merge --commit [-v | -q]"
msgstr ""
-#: builtin/notes.c:34
+#: builtin/notes.c:32
msgid "git notes merge --abort [-v | -q]"
msgstr ""
-#: builtin/notes.c:35
+#: builtin/notes.c:33
msgid "git notes [--ref <notes_ref>] remove [<object>...]"
msgstr ""
-#: builtin/notes.c:36
+#: builtin/notes.c:34
msgid "git notes [--ref <notes_ref>] prune [-n | -v]"
msgstr ""
-#: builtin/notes.c:37
+#: builtin/notes.c:35
msgid "git notes [--ref <notes_ref>] get-ref"
msgstr ""
-#: builtin/notes.c:42
+#: builtin/notes.c:40
msgid "git notes [list [<object>]]"
msgstr ""
-#: builtin/notes.c:47
+#: builtin/notes.c:45
msgid "git notes add [<options>] [<object>]"
msgstr ""
-#: builtin/notes.c:52
+#: builtin/notes.c:50
msgid "git notes copy [<options>] <from-object> <to-object>"
msgstr ""
-#: builtin/notes.c:53
+#: builtin/notes.c:51
msgid "git notes copy --stdin [<from-object> <to-object>]..."
msgstr ""
-#: builtin/notes.c:58
+#: builtin/notes.c:56
msgid "git notes append [<options>] [<object>]"
msgstr ""
-#: builtin/notes.c:63
+#: builtin/notes.c:61
msgid "git notes edit [<object>]"
msgstr ""
-#: builtin/notes.c:68
+#: builtin/notes.c:66
msgid "git notes show [<object>]"
msgstr ""
-#: builtin/notes.c:73
+#: builtin/notes.c:71
msgid "git notes merge [<options>] <notes_ref>"
msgstr ""
-#: builtin/notes.c:74
+#: builtin/notes.c:72
msgid "git notes merge --commit [<options>]"
msgstr ""
-#: builtin/notes.c:75
+#: builtin/notes.c:73
msgid "git notes merge --abort [<options>]"
msgstr ""
-#: builtin/notes.c:80
+#: builtin/notes.c:78
msgid "git notes remove [<object>]"
msgstr ""
-#: builtin/notes.c:85
+#: builtin/notes.c:83
msgid "git notes prune [<options>]"
msgstr ""
-#: builtin/notes.c:90
+#: builtin/notes.c:88
msgid "git notes get-ref"
msgstr ""
-#: builtin/notes.c:139
+#: builtin/notes.c:137
#, c-format
msgid "unable to start 'show' for object '%s'"
msgstr ""
-#: builtin/notes.c:143
+#: builtin/notes.c:141
msgid "could not read 'show' output"
msgstr ""
-#: builtin/notes.c:151
+#: builtin/notes.c:149
#, c-format
msgid "failed to finish 'show' for object '%s'"
msgstr ""
-#: builtin/notes.c:169 builtin/tag.c:341
+#: builtin/notes.c:167 builtin/tag.c:341
#, c-format
msgid "could not create file '%s'"
msgstr ""
-#: builtin/notes.c:188
+#: builtin/notes.c:186
msgid "Please supply the note contents using either -m or -F option"
msgstr ""
-#: builtin/notes.c:209 builtin/notes.c:972
+#: builtin/notes.c:207 builtin/notes.c:844
#, c-format
msgid "Removing note for object %s\n"
msgstr ""
-#: builtin/notes.c:214
+#: builtin/notes.c:212
msgid "unable to write note object"
msgstr ""
-#: builtin/notes.c:216
+#: builtin/notes.c:214
#, c-format
msgid "The note contents has been left in %s"
msgstr ""
-#: builtin/notes.c:250 builtin/tag.c:540
+#: builtin/notes.c:248 builtin/tag.c:540
#, c-format
msgid "cannot read '%s'"
msgstr ""
-#: builtin/notes.c:252 builtin/tag.c:543
+#: builtin/notes.c:250 builtin/tag.c:543
#, c-format
msgid "could not open or read '%s'"
msgstr ""
-#: builtin/notes.c:271 builtin/notes.c:444 builtin/notes.c:446
-#: builtin/notes.c:506 builtin/notes.c:560 builtin/notes.c:643
-#: builtin/notes.c:648 builtin/notes.c:723 builtin/notes.c:765
-#: builtin/notes.c:967 builtin/tag.c:556
+#: builtin/notes.c:269 builtin/notes.c:316 builtin/notes.c:318
+#: builtin/notes.c:378 builtin/notes.c:432 builtin/notes.c:515
+#: builtin/notes.c:520 builtin/notes.c:595 builtin/notes.c:637
+#: builtin/notes.c:839 builtin/tag.c:556
#, c-format
msgid "Failed to resolve '%s' as a valid ref."
msgstr ""
-#: builtin/notes.c:274
+#: builtin/notes.c:272
#, c-format
msgid "Failed to read object '%s'."
msgstr ""
-#: builtin/notes.c:298
-msgid "Cannot commit uninitialized/unreferenced notes tree"
-msgstr ""
-
-#: builtin/notes.c:339
-#, c-format
-msgid "Bad notes.rewriteMode value: '%s'"
-msgstr ""
-
-#: builtin/notes.c:349
-#, c-format
-msgid "Refusing to rewrite notes in %s (outside of refs/notes/)"
-msgstr ""
-
-#. TRANSLATORS: The first %s is the name of the
-#. environment variable, the second %s is its value
-#: builtin/notes.c:376
-#, c-format
-msgid "Bad %s value: '%s'"
-msgstr ""
-
-#: builtin/notes.c:440
+#: builtin/notes.c:312
#, c-format
msgid "Malformed input line: '%s'."
msgstr ""
-#: builtin/notes.c:455
+#: builtin/notes.c:327
#, c-format
msgid "Failed to copy notes from '%s' to '%s'"
msgstr ""
-#: builtin/notes.c:499 builtin/notes.c:553 builtin/notes.c:626
-#: builtin/notes.c:638 builtin/notes.c:711 builtin/notes.c:758
-#: builtin/notes.c:1032
+#: builtin/notes.c:371 builtin/notes.c:425 builtin/notes.c:498
+#: builtin/notes.c:510 builtin/notes.c:583 builtin/notes.c:630
+#: builtin/notes.c:904
msgid "too many parameters"
msgstr ""
-#: builtin/notes.c:512 builtin/notes.c:771
+#: builtin/notes.c:384 builtin/notes.c:643
#, c-format
msgid "No note found for object %s."
msgstr ""
-#: builtin/notes.c:534 builtin/notes.c:691
+#: builtin/notes.c:406 builtin/notes.c:563
msgid "note contents as a string"
msgstr ""
-#: builtin/notes.c:537 builtin/notes.c:694
+#: builtin/notes.c:409 builtin/notes.c:566
msgid "note contents in a file"
msgstr ""
-#: builtin/notes.c:539 builtin/notes.c:542 builtin/notes.c:696
-#: builtin/notes.c:699 builtin/tag.c:474
+#: builtin/notes.c:411 builtin/notes.c:414 builtin/notes.c:568
+#: builtin/notes.c:571 builtin/tag.c:474
msgid "object"
msgstr ""
-#: builtin/notes.c:540 builtin/notes.c:697
+#: builtin/notes.c:412 builtin/notes.c:569
msgid "reuse and edit specified note object"
msgstr ""
-#: builtin/notes.c:543 builtin/notes.c:700
+#: builtin/notes.c:415 builtin/notes.c:572
msgid "reuse specified note object"
msgstr ""
-#: builtin/notes.c:545 builtin/notes.c:613
+#: builtin/notes.c:417 builtin/notes.c:485
msgid "replace existing notes"
msgstr ""
-#: builtin/notes.c:579
+#: builtin/notes.c:451
#, c-format
msgid ""
"Cannot add notes. Found existing notes for object %s. Use '-f' to overwrite "
"existing notes"
msgstr ""
-#: builtin/notes.c:584 builtin/notes.c:661
+#: builtin/notes.c:456 builtin/notes.c:533
#, c-format
msgid "Overwriting existing notes for object %s\n"
msgstr ""
-#: builtin/notes.c:614
+#: builtin/notes.c:486
msgid "read objects from stdin"
msgstr ""
-#: builtin/notes.c:616
+#: builtin/notes.c:488
msgid "load rewriting config for <command> (implies --stdin)"
msgstr ""
-#: builtin/notes.c:634
+#: builtin/notes.c:506
msgid "too few parameters"
msgstr ""
-#: builtin/notes.c:655
+#: builtin/notes.c:527
#, c-format
msgid ""
"Cannot copy notes. Found existing notes for object %s. Use '-f' to overwrite "
"existing notes"
msgstr ""
-#: builtin/notes.c:667
+#: builtin/notes.c:539
#, c-format
msgid "Missing notes on source object %s. Cannot copy."
msgstr ""
-#: builtin/notes.c:716
+#: builtin/notes.c:588
#, c-format
msgid ""
"The -m/-F/-c/-C options have been deprecated for the 'edit' subcommand.\n"
"Please use 'git notes add -f -m/-F/-c/-C' instead.\n"
msgstr ""
-#: builtin/notes.c:863
+#: builtin/notes.c:735
msgid "General options"
msgstr ""
-#: builtin/notes.c:865
+#: builtin/notes.c:737
msgid "Merge options"
msgstr ""
-#: builtin/notes.c:867
+#: builtin/notes.c:739
msgid ""
"resolve notes conflicts using the given strategy (manual/ours/theirs/union/"
"cat_sort_uniq)"
msgstr ""
-#: builtin/notes.c:869
+#: builtin/notes.c:741
msgid "Committing unmerged notes"
msgstr ""
-#: builtin/notes.c:871
+#: builtin/notes.c:743
msgid "finalize notes merge by committing unmerged notes"
msgstr ""
-#: builtin/notes.c:873
+#: builtin/notes.c:745
msgid "Aborting notes merge resolution"
msgstr ""
-#: builtin/notes.c:875
+#: builtin/notes.c:747
msgid "abort notes merge"
msgstr ""
-#: builtin/notes.c:970
+#: builtin/notes.c:842
#, c-format
msgid "Object %s has no note\n"
msgstr ""
-#: builtin/notes.c:982
+#: builtin/notes.c:854
msgid "attempt to remove non-existent note is not an error"
msgstr ""
-#: builtin/notes.c:985
+#: builtin/notes.c:857
msgid "read object names from the standard input"
msgstr ""
-#: builtin/notes.c:1066
+#: builtin/notes.c:938
msgid "notes_ref"
msgstr ""
-#: builtin/notes.c:1067
+#: builtin/notes.c:939
msgid "use notes from <notes_ref>"
msgstr ""
-#: builtin/notes.c:1102 builtin/remote.c:1598
+#: builtin/notes.c:974 builtin/remote.c:1598
#, c-format
msgid "Unknown subcommand: %s"
msgstr ""
"%s"
msgstr ""
-#: builtin/push.c:121
+#: builtin/push.c:117
#, c-format
msgid ""
"You are not currently on a branch.\n"
" git push %s HEAD:<name-of-remote-branch>\n"
msgstr ""
-#: builtin/push.c:128
+#: builtin/push.c:131
#, c-format
msgid ""
"The current branch %s has no upstream branch.\n"
" git push --set-upstream %s %s\n"
msgstr ""
-#: builtin/push.c:136
+#: builtin/push.c:139
#, c-format
msgid "The current branch %s has multiple upstream branches, refusing to push."
msgstr ""
-#: builtin/push.c:139
+#: builtin/push.c:142
#, c-format
msgid ""
"You are pushing to remote '%s', which is not the upstream of\n"
"to update which remote branch."
msgstr ""
-#: builtin/push.c:151
+#: builtin/push.c:165
msgid ""
"push.default is unset; its implicit value is changing in\n"
"Git 2.0 from 'matching' to 'simple'. To squelch this message\n"
"'current' instead of 'simple' if you sometimes use older versions of Git)"
msgstr ""
-#: builtin/push.c:199
+#: builtin/push.c:225
msgid ""
"You didn't specify any refspecs to push, and push.default is \"nothing\"."
msgstr ""
-#: builtin/push.c:206
+#: builtin/push.c:232
msgid ""
"Updates were rejected because the tip of your current branch is behind\n"
-"its remote counterpart. Merge the remote changes (e.g. 'git pull')\n"
-"before pushing again.\n"
+"its remote counterpart. Integrate the remote changes (e.g.\n"
+"'git pull ...') before pushing again.\n"
"See the 'Note about fast-forwards' in 'git push --help' for details."
msgstr ""
-#: builtin/push.c:212
+#: builtin/push.c:238
msgid ""
"Updates were rejected because a pushed branch tip is behind its remote\n"
"counterpart. If you did not intend to push that branch, you may want to\n"
"to 'simple', 'current' or 'upstream' to push only the current branch."
msgstr ""
-#: builtin/push.c:218
+#: builtin/push.c:244
msgid ""
"Updates were rejected because a pushed branch tip is behind its remote\n"
-"counterpart. Check out this branch and merge the remote changes\n"
-"(e.g. 'git pull') before pushing again.\n"
+"counterpart. Check out this branch and integrate the remote changes\n"
+"(e.g. 'git pull ...') before pushing again.\n"
"See the 'Note about fast-forwards' in 'git push --help' for details."
msgstr ""
-#: builtin/push.c:224
+#: builtin/push.c:250
msgid ""
"Updates were rejected because the remote contains work that you do\n"
"not have locally. This is usually caused by another repository pushing\n"
-"to the same ref. You may want to first merge the remote changes (e.g.,\n"
-"'git pull') before pushing again.\n"
+"to the same ref. You may want to first integrate the remote changes\n"
+"(e.g., 'git pull ...') before pushing again.\n"
"See the 'Note about fast-forwards' in 'git push --help' for details."
msgstr ""
-#: builtin/push.c:231
+#: builtin/push.c:257
msgid "Updates were rejected because the tag already exists in the remote."
msgstr ""
-#: builtin/push.c:234
+#: builtin/push.c:260
msgid ""
"You cannot update a remote ref that points at a non-commit object,\n"
"or update a remote ref to make it point at a non-commit object,\n"
"without using the '--force' option.\n"
msgstr ""
-#: builtin/push.c:294
+#: builtin/push.c:320
#, c-format
msgid "Pushing to %s\n"
msgstr ""
-#: builtin/push.c:298
+#: builtin/push.c:324
#, c-format
msgid "failed to push some refs to '%s'"
msgstr ""
-#: builtin/push.c:331
+#: builtin/push.c:357
#, c-format
msgid "bad repository '%s'"
msgstr ""
-#: builtin/push.c:332
+#: builtin/push.c:358
msgid ""
"No configured push destination.\n"
"Either specify the URL from the command-line or configure a remote "
" git push <name>\n"
msgstr ""
-#: builtin/push.c:347
+#: builtin/push.c:373
msgid "--all and --tags are incompatible"
msgstr ""
-#: builtin/push.c:348
+#: builtin/push.c:374
msgid "--all can't be combined with refspecs"
msgstr ""
-#: builtin/push.c:353
+#: builtin/push.c:379
msgid "--mirror and --tags are incompatible"
msgstr ""
-#: builtin/push.c:354
+#: builtin/push.c:380
msgid "--mirror can't be combined with refspecs"
msgstr ""
-#: builtin/push.c:359
+#: builtin/push.c:385
msgid "--all and --mirror are incompatible"
msgstr ""
-#: builtin/push.c:419
+#: builtin/push.c:445
msgid "repository"
msgstr ""
-#: builtin/push.c:420
+#: builtin/push.c:446
msgid "push all refs"
msgstr ""
-#: builtin/push.c:421
+#: builtin/push.c:447
msgid "mirror all refs"
msgstr ""
-#: builtin/push.c:423
+#: builtin/push.c:449
msgid "delete refs"
msgstr ""
-#: builtin/push.c:424
+#: builtin/push.c:450
msgid "push tags (can't be used with --all or --mirror)"
msgstr ""
-#: builtin/push.c:427
+#: builtin/push.c:453
msgid "force updates"
msgstr ""
-#: builtin/push.c:428
+#: builtin/push.c:454
msgid "check"
msgstr ""
-#: builtin/push.c:429
+#: builtin/push.c:455
msgid "control recursive pushing of submodules"
msgstr ""
-#: builtin/push.c:431
+#: builtin/push.c:457
msgid "use thin pack"
msgstr ""
-#: builtin/push.c:432 builtin/push.c:433
+#: builtin/push.c:458 builtin/push.c:459
msgid "receive pack program"
msgstr ""
-#: builtin/push.c:434
+#: builtin/push.c:460
msgid "set upstream for git pull/status"
msgstr ""
-#: builtin/push.c:437
+#: builtin/push.c:463
msgid "prune locally removed refs"
msgstr ""
-#: builtin/push.c:439
+#: builtin/push.c:465
msgid "bypass pre-push hook"
msgstr ""
-#: builtin/push.c:440
+#: builtin/push.c:466
msgid "push missing but relevant tags"
msgstr ""
-#: builtin/push.c:450
+#: builtin/push.c:476
msgid "--delete is incompatible with --all, --mirror and --tags"
msgstr ""
-#: builtin/push.c:452
+#: builtin/push.c:478
msgid "--delete doesn't make sense without any refs"
msgstr ""
"index-output=<file>] (--empty | <tree-ish1> [<tree-ish2> [<tree-ish3>]])"
msgstr ""
-#: builtin/read-tree.c:108
+#: builtin/read-tree.c:109
msgid "write resulting index to <file>"
msgstr ""
-#: builtin/read-tree.c:111
+#: builtin/read-tree.c:112
msgid "only empty the index"
msgstr ""
-#: builtin/read-tree.c:113
+#: builtin/read-tree.c:114
msgid "Merging"
msgstr ""
-#: builtin/read-tree.c:115
+#: builtin/read-tree.c:116
msgid "perform a merge in addition to a read"
msgstr ""
-#: builtin/read-tree.c:117
+#: builtin/read-tree.c:118
msgid "3-way merge if no file level merging required"
msgstr ""
-#: builtin/read-tree.c:119
+#: builtin/read-tree.c:120
msgid "3-way merge in presence of adds and removes"
msgstr ""
-#: builtin/read-tree.c:121
+#: builtin/read-tree.c:122
msgid "same as -m, but discard unmerged entries"
msgstr ""
-#: builtin/read-tree.c:122
+#: builtin/read-tree.c:123
msgid "<subdirectory>/"
msgstr ""
-#: builtin/read-tree.c:123
+#: builtin/read-tree.c:124
msgid "read the tree into the index under <subdirectory>/"
msgstr ""
-#: builtin/read-tree.c:126
+#: builtin/read-tree.c:127
msgid "update working tree with merge result"
msgstr ""
-#: builtin/read-tree.c:128
+#: builtin/read-tree.c:129
msgid "gitignore"
msgstr ""
-#: builtin/read-tree.c:129
+#: builtin/read-tree.c:130
msgid "allow explicitly ignored files to be overwritten"
msgstr ""
-#: builtin/read-tree.c:132
+#: builtin/read-tree.c:133
msgid "don't check the working tree after merging"
msgstr ""
-#: builtin/read-tree.c:133
+#: builtin/read-tree.c:134
msgid "don't update the index or the work tree"
msgstr ""
-#: builtin/read-tree.c:135
+#: builtin/read-tree.c:136
msgid "skip applying sparse checkout filter"
msgstr ""
-#: builtin/read-tree.c:137
+#: builtin/read-tree.c:138
msgid "debug unpack-trees"
msgstr ""
+#: builtin/reflog.c:500
+#, c-format
+msgid "%s' for '%s' is not a valid timestamp"
+msgstr ""
+
+#: builtin/reflog.c:616 builtin/reflog.c:621
+#, c-format
+msgid "'%s' is not a valid timestamp"
+msgstr ""
+
#: builtin/remote.c:11
msgid "git remote [-v | --verbose]"
msgstr ""
msgid "Failed to find tree of %s."
msgstr ""
-#: builtin/reset.c:98
+#: builtin/reset.c:99
#, c-format
msgid "HEAD is now at %s"
msgstr ""
-#: builtin/reset.c:169
+#: builtin/reset.c:172
#, c-format
msgid "Cannot do a %s reset in the middle of a merge."
msgstr ""
-#: builtin/reset.c:248
+#: builtin/reset.c:251
msgid "be quiet, only report errors"
msgstr ""
-#: builtin/reset.c:250
+#: builtin/reset.c:253
msgid "reset HEAD and index"
msgstr ""
-#: builtin/reset.c:251
+#: builtin/reset.c:254
msgid "reset only HEAD"
msgstr ""
-#: builtin/reset.c:253 builtin/reset.c:255
+#: builtin/reset.c:256 builtin/reset.c:258
msgid "reset HEAD, index and working tree"
msgstr ""
-#: builtin/reset.c:257
+#: builtin/reset.c:260
msgid "reset HEAD but keep local changes"
msgstr ""
-#: builtin/reset.c:275
+#: builtin/reset.c:278
#, c-format
msgid "Failed to resolve '%s' as a valid revision."
msgstr ""
-#: builtin/reset.c:278 builtin/reset.c:286
+#: builtin/reset.c:281 builtin/reset.c:289
#, c-format
msgid "Could not parse object '%s'."
msgstr ""
-#: builtin/reset.c:283
+#: builtin/reset.c:286
#, c-format
msgid "Failed to resolve '%s' as a valid tree."
msgstr ""
-#: builtin/reset.c:292
+#: builtin/reset.c:295
msgid "--patch is incompatible with --{hard,mixed,soft}"
msgstr ""
-#: builtin/reset.c:301
+#: builtin/reset.c:304
msgid "--mixed with paths is deprecated; use 'git reset -- <paths>' instead."
msgstr ""
-#: builtin/reset.c:303
+#: builtin/reset.c:306
#, c-format
msgid "Cannot do %s reset with paths."
msgstr ""
-#: builtin/reset.c:313
+#: builtin/reset.c:316
#, c-format
msgid "%s reset is not allowed in a bare repository"
msgstr ""
-#: builtin/reset.c:333
+#: builtin/reset.c:336
#, c-format
msgid "Could not reset index file to revision '%s'."
msgstr ""
-#: builtin/reset.c:339
+#: builtin/reset.c:342
msgid "Unstaged changes after reset:"
msgstr ""
-#: builtin/reset.c:344
+#: builtin/reset.c:347
msgid "Could not write new index file."
msgstr ""
-#: builtin/rev-parse.c:339
+#: builtin/rev-parse.c:345
msgid "git rev-parse --parseopt [options] -- [<args>...]"
msgstr ""
-#: builtin/rev-parse.c:344
+#: builtin/rev-parse.c:350
msgid "keep the `--` passed as an arg"
msgstr ""
-#: builtin/rev-parse.c:346
+#: builtin/rev-parse.c:352
msgid "stop parsing after the first non-option argument"
msgstr ""
-#: builtin/rev-parse.c:464
+#: builtin/rev-parse.c:470
msgid ""
"git rev-parse --parseopt [options] -- [<args>...]\n"
" or: git rev-parse --sq-quote [<arg>...]\n"
msgid "git cherry-pick <subcommand>"
msgstr ""
-#: builtin/revert.c:70 builtin/revert.c:92
+#: builtin/revert.c:71 builtin/revert.c:94
#, c-format
msgid "%s: %s cannot be used with %s"
msgstr ""
-#: builtin/revert.c:103
+#: builtin/revert.c:105
msgid "end revert or cherry-pick sequence"
msgstr ""
-#: builtin/revert.c:104
+#: builtin/revert.c:106
msgid "resume revert or cherry-pick sequence"
msgstr ""
-#: builtin/revert.c:105
+#: builtin/revert.c:107
msgid "cancel revert or cherry-pick sequence"
msgstr ""
-#: builtin/revert.c:106
+#: builtin/revert.c:108
msgid "don't automatically commit"
msgstr ""
-#: builtin/revert.c:107
+#: builtin/revert.c:109
msgid "edit the commit message"
msgstr ""
-#: builtin/revert.c:110
+#: builtin/revert.c:112
msgid "parent number"
msgstr ""
-#: builtin/revert.c:112
+#: builtin/revert.c:114
msgid "merge strategy"
msgstr ""
-#: builtin/revert.c:113
+#: builtin/revert.c:115
msgid "option"
msgstr ""
-#: builtin/revert.c:114
+#: builtin/revert.c:116
msgid "option for merge strategy"
msgstr ""
-#: builtin/revert.c:125
+#: builtin/revert.c:127
msgid "append commit name"
msgstr ""
-#: builtin/revert.c:126
+#: builtin/revert.c:128
msgid "allow fast-forward"
msgstr ""
-#: builtin/revert.c:127
+#: builtin/revert.c:129
msgid "preserve initially empty commits"
msgstr ""
-#: builtin/revert.c:128
+#: builtin/revert.c:130
msgid "allow commits with empty messages"
msgstr ""
-#: builtin/revert.c:129
+#: builtin/revert.c:131
msgid "keep redundant, empty commits"
msgstr ""
-#: builtin/revert.c:133
+#: builtin/revert.c:135
msgid "program error"
msgstr ""
-#: builtin/revert.c:223
+#: builtin/revert.c:225
msgid "revert failed"
msgstr ""
-#: builtin/revert.c:238
+#: builtin/revert.c:240
msgid "cherry-pick failed"
msgstr ""
-#: builtin/rm.c:15
+#: builtin/rm.c:16
msgid "git rm [options] [--] <file>..."
msgstr ""
-#: builtin/rm.c:64 builtin/rm.c:186
-#, c-format
+#: builtin/rm.c:64
msgid ""
-"submodule '%s' (or one of its nested submodules) uses a .git directory\n"
+"the following submodule (or one of its nested submodules)\n"
+"uses a .git directory:"
+msgid_plural ""
+"the following submodules (or one of its nested submodules)\n"
+"use a .git directory:"
+msgstr[0] ""
+msgstr[1] ""
+
+#: builtin/rm.c:70
+msgid ""
+"\n"
"(use 'rm -rf' if you really want to remove it including all of its history)"
msgstr ""
-#: builtin/rm.c:174
-#, c-format
+#: builtin/rm.c:230
msgid ""
-"'%s' has staged content different from both the file and the HEAD\n"
-"(use -f to force removal)"
-msgstr ""
+"the following file has staged content different from both the\n"
+"file and the HEAD:"
+msgid_plural ""
+"the following files have staged content different from both the\n"
+"file and the HEAD:"
+msgstr[0] ""
+msgstr[1] ""
-#: builtin/rm.c:180
-#, c-format
+#: builtin/rm.c:235
msgid ""
-"'%s' has changes staged in the index\n"
-"(use --cached to keep the file, or -f to force removal)"
+"\n"
+"(use -f to force removal)"
msgstr ""
-#: builtin/rm.c:191
-#, c-format
+#: builtin/rm.c:239
+msgid "the following file has changes staged in the index:"
+msgid_plural "the following files have changes staged in the index:"
+msgstr[0] ""
+msgstr[1] ""
+
+#: builtin/rm.c:243 builtin/rm.c:254
msgid ""
-"'%s' has local modifications\n"
+"\n"
"(use --cached to keep the file, or -f to force removal)"
msgstr ""
-#: builtin/rm.c:207
+#: builtin/rm.c:251
+msgid "the following file has local modifications:"
+msgid_plural "the following files have local modifications:"
+msgstr[0] ""
+msgstr[1] ""
+
+#: builtin/rm.c:269
msgid "do not list removed files"
msgstr ""
-#: builtin/rm.c:208
+#: builtin/rm.c:270
msgid "only remove from the index"
msgstr ""
-#: builtin/rm.c:209
+#: builtin/rm.c:271
msgid "override the up-to-date check"
msgstr ""
-#: builtin/rm.c:210
+#: builtin/rm.c:272
msgid "allow recursive removal"
msgstr ""
-#: builtin/rm.c:212
+#: builtin/rm.c:274
msgid "exit with a zero status even if nothing matched"
msgstr ""
-#: builtin/rm.c:283
+#: builtin/rm.c:345
#, c-format
msgid "not removing '%s' recursively without -r"
msgstr ""
-#: builtin/rm.c:322
+#: builtin/rm.c:384
#, c-format
msgid "git rm: unable to remove %s"
msgstr ""
msgid "Missing author: %s"
msgstr ""
-#: builtin/shortlog.c:227
+#: builtin/shortlog.c:228
msgid "sort output according to the number of commits per author"
msgstr ""
-#: builtin/shortlog.c:229
+#: builtin/shortlog.c:230
msgid "Suppress commit descriptions, only provides commit count"
msgstr ""
-#: builtin/shortlog.c:231
+#: builtin/shortlog.c:232
msgid "Show the email address of each author"
msgstr ""
-#: builtin/shortlog.c:232
+#: builtin/shortlog.c:233
msgid "w[,i1[,i2]]"
msgstr ""
-#: builtin/shortlog.c:233
+#: builtin/shortlog.c:234
msgid "Linewrap output"
msgstr ""
msgid "show commits in topological order"
msgstr ""
-#: builtin/show-branch.c:671
+#: builtin/show-branch.c:672
msgid "show only commits not on the first branch"
msgstr ""
-#: builtin/show-branch.c:673
+#: builtin/show-branch.c:674
msgid "show merges reachable from only one tip"
msgstr ""
-#: builtin/show-branch.c:675
-msgid "show commits where no parent comes before its children"
+#: builtin/show-branch.c:676
+msgid "topologically sort, maintaining date order where possible"
msgstr ""
-#: builtin/show-branch.c:677
+#: builtin/show-branch.c:679
msgid "<n>[,<base>]"
msgstr ""
-#: builtin/show-branch.c:678
+#: builtin/show-branch.c:680
msgid "show <n> most recent ref-log entries starting at base"
msgstr ""
msgid "git show-ref --exclude-existing[=pattern] < ref-list"
msgstr ""
-#: builtin/show-ref.c:165
+#: builtin/show-ref.c:168
msgid "only show tags (can be combined with heads)"
msgstr ""
-#: builtin/show-ref.c:166
+#: builtin/show-ref.c:169
msgid "only show heads (can be combined with tags)"
msgstr ""
-#: builtin/show-ref.c:167
+#: builtin/show-ref.c:170
msgid "stricter reference checking, requires exact ref path"
msgstr ""
-#: builtin/show-ref.c:170 builtin/show-ref.c:172
-msgid "show the HEAD reference"
+#: builtin/show-ref.c:173 builtin/show-ref.c:176
+msgid "show the HEAD reference, even if it would be filtered out"
msgstr ""
-#: builtin/show-ref.c:174
+#: builtin/show-ref.c:178
msgid "dereference tags into object IDs"
msgstr ""
-#: builtin/show-ref.c:176
+#: builtin/show-ref.c:180
msgid "only show SHA1 hash using <n> digits"
msgstr ""
-#: builtin/show-ref.c:180
+#: builtin/show-ref.c:184
msgid "do not print results to stdout (useful with --verify)"
msgstr ""
-#: builtin/show-ref.c:182
+#: builtin/show-ref.c:186
msgid "show refs from stdin that aren't in local repository"
msgstr ""
msgid "only useful for debugging"
msgstr ""
-#: git.c:16
+#: git.c:17
msgid ""
"'git help -a' and 'git help -g' lists available subcommands and some\n"
"concept guides. See 'git help <command>' or 'git help <concept>'\n"
"to read about a specific subcommand or concept."
msgstr ""
-#: parse-options.h:156
+#: parse-options.h:144
+msgid "expiry date"
+msgstr ""
+
+#: parse-options.h:159
msgid "no-op (backward compatibility)"
msgstr ""
-#: parse-options.h:232
+#: parse-options.h:236
msgid "be more verbose"
msgstr ""
-#: parse-options.h:234
+#: parse-options.h:238
msgid "be more quiet"
msgstr ""
-#: parse-options.h:240
+#: parse-options.h:244
msgid "use <n> digits to display SHA-1s"
msgstr ""
msgstr ""
#: common-cmds.h:21
-msgid "Fetch from and merge with another repository or a local branch"
+msgid "Fetch from and integrate with another repository or a local branch"
msgstr ""
#: common-cmds.h:22
#: git-am.sh:105
#, sh-format
msgid ""
-"When you have resolved this problem, run \"$cmdline --resolved\".\n"
+"When you have resolved this problem, run \"$cmdline --continue\".\n"
"If you prefer to skip this patch, run \"$cmdline --skip\" instead.\n"
"To restore the original branch and stop patching, run \"$cmdline --abort\"."
msgstr ""
"it will be removed. Please do not use it anymore."
msgstr ""
-#: git-am.sh:477
+#: git-am.sh:479
#, sh-format
msgid "previous rebase directory $dotest still exists but mbox given."
msgstr ""
-#: git-am.sh:482
+#: git-am.sh:484
msgid "Please make up your mind. --skip or --abort?"
msgstr ""
-#: git-am.sh:509
+#: git-am.sh:520
+#, sh-format
+msgid ""
+"Stray $dotest directory found.\n"
+"Use \"git am --abort\" to remove it."
+msgstr ""
+
+#: git-am.sh:528
msgid "Resolve operation not in progress, we are not resuming."
msgstr ""
-#: git-am.sh:575
+#: git-am.sh:594
#, sh-format
msgid "Dirty index: cannot apply patches (dirty: $files)"
msgstr ""
-#: git-am.sh:679
+#: git-am.sh:698
#, sh-format
msgid ""
"Patch is empty. Was it split wrong?\n"
"To restore the original branch and stop patching run \"$cmdline --abort\"."
msgstr ""
-#: git-am.sh:706
+#: git-am.sh:725
msgid "Patch does not have a valid e-mail address."
msgstr ""
-#: git-am.sh:753
+#: git-am.sh:772
msgid "cannot be interactive without stdin connected to a terminal."
msgstr ""
-#: git-am.sh:757
+#: git-am.sh:776
msgid "Commit Body is:"
msgstr ""
#. TRANSLATORS: Make sure to include [y], [n], [e], [v] and [a]
#. in your translation. The program will only accept English
#. input at this point.
-#: git-am.sh:764
+#: git-am.sh:783
msgid "Apply? [y]es/[n]o/[e]dit/[v]iew patch/[a]ccept all "
msgstr ""
-#: git-am.sh:800
+#: git-am.sh:819
#, sh-format
msgid "Applying: $FIRSTLINE"
msgstr ""
-#: git-am.sh:821
+#: git-am.sh:840
msgid ""
"No changes - did you forget to use 'git add'?\n"
"If there is nothing left to stage, chances are that something else\n"
"already introduced the same changes; you might want to skip this patch."
msgstr ""
-#: git-am.sh:829
+#: git-am.sh:848
msgid ""
"You still have unmerged paths in your index\n"
"did you forget to use 'git add'?"
msgstr ""
-#: git-am.sh:845
+#: git-am.sh:864
msgid "No changes -- Patch already applied."
msgstr ""
-#: git-am.sh:855
+#: git-am.sh:874
#, sh-format
msgid "Patch failed at $msgnum $FIRSTLINE"
msgstr ""
-#: git-am.sh:858
+#: git-am.sh:877
#, sh-format
msgid ""
"The copy of the patch that failed is found in:\n"
" $dotest/patch"
msgstr ""
-#: git-am.sh:876
+#: git-am.sh:895
msgid "applying to an empty history"
msgstr ""
msgid "Cannot rebase onto multiple branches"
msgstr ""
-#: git-rebase.sh:53
+#: git-rebase.sh:54
msgid ""
"When you have resolved this problem, run \"git rebase --continue\".\n"
"If you prefer to skip this patch, run \"git rebase --skip\" instead.\n"
"\"."
msgstr ""
+#: git-rebase.sh:156
+msgid "Applied autostash."
+msgstr ""
+
+#: git-rebase.sh:159
+#, sh-format
+msgid "Cannot store $stash_sha1"
+msgstr ""
+
#: git-rebase.sh:160
+msgid ""
+"Applying autostash resulted in conflicts.\n"
+"Your changes are safe in the stash.\n"
+"You can run \"git stash pop\" or \"git stash drop\" it at any time.\n"
+msgstr ""
+
+#: git-rebase.sh:190
msgid "The pre-rebase hook refused to rebase."
msgstr ""
-#: git-rebase.sh:165
+#: git-rebase.sh:195
msgid "It looks like git-am is in progress. Cannot rebase."
msgstr ""
-#: git-rebase.sh:296
+#: git-rebase.sh:329
msgid "The --exec option must be used with the --interactive option"
msgstr ""
-#: git-rebase.sh:301
+#: git-rebase.sh:334
msgid "No rebase in progress?"
msgstr ""
-#: git-rebase.sh:312
+#: git-rebase.sh:345
msgid "The --edit-todo action can only be used during interactive rebase."
msgstr ""
-#: git-rebase.sh:319
+#: git-rebase.sh:352
msgid "Cannot read HEAD"
msgstr ""
-#: git-rebase.sh:322
+#: git-rebase.sh:355
msgid ""
"You must edit all merge conflicts and then\n"
"mark them as resolved using git add"
msgstr ""
-#: git-rebase.sh:340
+#: git-rebase.sh:373
#, sh-format
msgid "Could not move back to $head_name"
msgstr ""
-#: git-rebase.sh:359
+#: git-rebase.sh:392
#, sh-format
msgid ""
"It seems that there is already a $state_dir_base directory, and\n"
"valuable there."
msgstr ""
-#: git-rebase.sh:404
+#: git-rebase.sh:437
#, sh-format
msgid "invalid upstream $upstream_name"
msgstr ""
-#: git-rebase.sh:428
+#: git-rebase.sh:461
#, sh-format
msgid "$onto_name: there are more than one merge bases"
msgstr ""
-#: git-rebase.sh:431 git-rebase.sh:435
+#: git-rebase.sh:464 git-rebase.sh:468
#, sh-format
msgid "$onto_name: there is no merge base"
msgstr ""
-#: git-rebase.sh:440
+#: git-rebase.sh:473
#, sh-format
msgid "Does not point to a valid commit: $onto_name"
msgstr ""
-#: git-rebase.sh:463
+#: git-rebase.sh:496
#, sh-format
msgid "fatal: no such branch: $branch_name"
msgstr ""
-#: git-rebase.sh:483
+#: git-rebase.sh:519
+msgid "Cannot autostash"
+msgstr ""
+
+#: git-rebase.sh:524
+#, sh-format
+msgid "Created autostash: $stash_abbrev"
+msgstr ""
+
+#: git-rebase.sh:528
msgid "Please commit or stash them."
msgstr ""
-#: git-rebase.sh:501
+#: git-rebase.sh:548
#, sh-format
msgid "Current branch $branch_name is up to date."
msgstr ""
-#: git-rebase.sh:504
+#: git-rebase.sh:552
#, sh-format
msgid "Current branch $branch_name is up to date, rebase forced."
msgstr ""
-#: git-rebase.sh:515
+#: git-rebase.sh:563
#, sh-format
msgid "Changes from $mb to $onto:"
msgstr ""
#. Detach HEAD and reset the tree
-#: git-rebase.sh:524
+#: git-rebase.sh:572
msgid "First, rewinding head to replay your work on top of it..."
msgstr ""
-#: git-rebase.sh:532
+#: git-rebase.sh:582
#, sh-format
msgid "Fast-forwarded $branch_name to $onto_name."
msgstr ""
msgid "Cannot record working tree state"
msgstr ""
+#: git-stash.sh:190
+#, sh-format
+msgid "Cannot update $ref_stash with $w_commit"
+msgstr ""
+
#. TRANSLATORS: $option is an invalid option, like
#. `--blah-blah'. The 7 spaces at the beginning of the
#. second line correspond to "error: ". So you should line
#. $ git stash save --blah-blah 2>&1 | head -n 2
#. error: unknown option for 'stash save': --blah-blah
#. To provide a message, use git stash save -- '--blah-blah'
-#: git-stash.sh:202
+#: git-stash.sh:241
#, sh-format
msgid ""
"error: unknown option for 'stash save': $option\n"
" To provide a message, use git stash save -- '$option'"
msgstr ""
-#: git-stash.sh:223
+#: git-stash.sh:262
msgid "No local changes to save"
msgstr ""
-#: git-stash.sh:227
+#: git-stash.sh:268
+msgid ""
+"The following untracked files would NOT be saved but need to be removed by "
+"stash save:"
+msgstr ""
+
+#: git-stash.sh:270
+msgid ""
+"Aborting. Consider using either the --force or --include-untracked option."
+msgstr ""
+
+#: git-stash.sh:274
msgid "Cannot initialize stash"
msgstr ""
-#: git-stash.sh:235
+#: git-stash.sh:278
msgid "Cannot save the current status"
msgstr ""
-#: git-stash.sh:253
+#: git-stash.sh:296
msgid "Cannot remove worktree changes"
msgstr ""
-#: git-stash.sh:352
+#: git-stash.sh:395
msgid "No stash found."
msgstr ""
-#: git-stash.sh:359
+#: git-stash.sh:402
#, sh-format
msgid "Too many revisions specified: $REV"
msgstr ""
-#: git-stash.sh:365
+#: git-stash.sh:408
#, sh-format
msgid "$reference is not valid reference"
msgstr ""
-#: git-stash.sh:393
+#: git-stash.sh:436
#, sh-format
msgid "'$args' is not a stash-like commit"
msgstr ""
-#: git-stash.sh:404
+#: git-stash.sh:447
#, sh-format
msgid "'$args' is not a stash reference"
msgstr ""
-#: git-stash.sh:412
+#: git-stash.sh:455
msgid "unable to refresh index"
msgstr ""
-#: git-stash.sh:416
+#: git-stash.sh:459
msgid "Cannot apply a stash in the middle of a merge"
msgstr ""
-#: git-stash.sh:424
+#: git-stash.sh:467
msgid "Conflicts in index. Try without --index."
msgstr ""
-#: git-stash.sh:426
+#: git-stash.sh:469
msgid "Could not save index tree"
msgstr ""
-#: git-stash.sh:460
+#: git-stash.sh:503
msgid "Cannot unstage modified files"
msgstr ""
-#: git-stash.sh:475
+#: git-stash.sh:518
msgid "Index was not unstashed."
msgstr ""
-#: git-stash.sh:492
+#: git-stash.sh:535
#, sh-format
msgid "Dropped ${REV} ($s)"
msgstr ""
-#: git-stash.sh:493
+#: git-stash.sh:536
#, sh-format
msgid "${REV}: Could not drop stash entry"
msgstr ""
-#: git-stash.sh:500
+#: git-stash.sh:543
msgid "No branch name specified"
msgstr ""
-#: git-stash.sh:571
+#: git-stash.sh:615
msgid "(To restore them type \"git stash apply\")"
msgstr ""
-#: git-submodule.sh:91
+#: git-submodule.sh:95
#, sh-format
msgid "cannot strip one component off url '$remoteurl'"
msgstr ""
-#: git-submodule.sh:196
+#: git-submodule.sh:237
#, sh-format
msgid "No submodule mapping found in .gitmodules for path '$sm_path'"
msgstr ""
-#: git-submodule.sh:239
+#: git-submodule.sh:281
#, sh-format
msgid "Clone of '$url' into submodule path '$sm_path' failed"
msgstr ""
-#: git-submodule.sh:251
+#: git-submodule.sh:293
#, sh-format
msgid "Gitdir '$a' is part of the submodule path '$b' or vice versa"
msgstr ""
-#: git-submodule.sh:349
+#: git-submodule.sh:403
+msgid "Relative path can only be used from the toplevel of the working tree"
+msgstr ""
+
+#: git-submodule.sh:413
#, sh-format
msgid "repo URL: '$repo' must be absolute or begin with ./|../"
msgstr ""
-#: git-submodule.sh:366
+#: git-submodule.sh:430
#, sh-format
msgid "'$sm_path' already exists in the index"
msgstr ""
-#: git-submodule.sh:370
+#: git-submodule.sh:434
#, sh-format
msgid ""
"The following path is ignored by one of your .gitignore files:\n"
"Use -f if you really want to add it."
msgstr ""
-#: git-submodule.sh:388
+#: git-submodule.sh:452
#, sh-format
msgid "Adding existing repo at '$sm_path' to the index"
msgstr ""
-#: git-submodule.sh:390
+#: git-submodule.sh:454
#, sh-format
msgid "'$sm_path' already exists and is not a valid git repo"
msgstr ""
-#: git-submodule.sh:398
+#: git-submodule.sh:462
#, sh-format
msgid "A git directory for '$sm_name' is found locally with remote(s):"
msgstr ""
-#: git-submodule.sh:400
+#: git-submodule.sh:464
#, sh-format
msgid ""
"If you want to reuse this local git directory instead of cloning again from"
msgstr ""
-#: git-submodule.sh:402
+#: git-submodule.sh:466
#, sh-format
msgid ""
"use the '--force' option. If the local git directory is not the correct repo"
msgstr ""
-#: git-submodule.sh:403
+#: git-submodule.sh:467
#, sh-format
msgid ""
"or you are unsure what this means choose another name with the '--name' "
"option."
msgstr ""
-#: git-submodule.sh:405
+#: git-submodule.sh:469
#, sh-format
msgid "Reactivating local git directory for submodule '$sm_name'."
msgstr ""
-#: git-submodule.sh:417
+#: git-submodule.sh:481
#, sh-format
msgid "Unable to checkout submodule '$sm_path'"
msgstr ""
-#: git-submodule.sh:422
+#: git-submodule.sh:486
#, sh-format
msgid "Failed to add submodule '$sm_path'"
msgstr ""
-#: git-submodule.sh:431
+#: git-submodule.sh:495
#, sh-format
msgid "Failed to register submodule '$sm_path'"
msgstr ""
-#: git-submodule.sh:474
+#: git-submodule.sh:539
#, sh-format
-msgid "Entering '$prefix$sm_path'"
+msgid "Entering '$prefix$displaypath'"
msgstr ""
-#: git-submodule.sh:488
+#: git-submodule.sh:554
#, sh-format
-msgid "Stopping at '$sm_path'; script returned non-zero status."
+msgid "Stopping at '$prefix$displaypath'; script returned non-zero status."
msgstr ""
-#: git-submodule.sh:532
+#: git-submodule.sh:600
#, sh-format
-msgid "No url found for submodule path '$sm_path' in .gitmodules"
+msgid "No url found for submodule path '$displaypath' in .gitmodules"
msgstr ""
-#: git-submodule.sh:541
+#: git-submodule.sh:609
#, sh-format
-msgid "Failed to register url for submodule path '$sm_path'"
+msgid "Failed to register url for submodule path '$displaypath'"
msgstr ""
-#: git-submodule.sh:543
+#: git-submodule.sh:611
#, sh-format
-msgid "Submodule '$name' ($url) registered for path '$sm_path'"
+msgid "Submodule '$name' ($url) registered for path '$displaypath'"
msgstr ""
-#: git-submodule.sh:551
+#: git-submodule.sh:619
#, sh-format
-msgid "Failed to register update mode for submodule path '$sm_path'"
+msgid "Failed to register update mode for submodule path '$displaypath'"
msgstr ""
-#: git-submodule.sh:588
+#: git-submodule.sh:656
#, sh-format
msgid "Use '.' if you really want to deinitialize all submodules"
msgstr ""
-#: git-submodule.sh:603
+#: git-submodule.sh:673
#, sh-format
-msgid "Submodule work tree '$sm_path' contains a .git directory"
+msgid "Submodule work tree '$displaypath' contains a .git directory"
msgstr ""
-#: git-submodule.sh:604
+#: git-submodule.sh:674
#, sh-format
msgid ""
"(use 'rm -rf' if you really want to remove it including all of its history)"
msgstr ""
-#: git-submodule.sh:610
+#: git-submodule.sh:680
#, sh-format
msgid ""
-"Submodule work tree '$sm_path' contains local modifications; use '-f' to "
+"Submodule work tree '$displaypath' contains local modifications; use '-f' to "
"discard them"
msgstr ""
-#: git-submodule.sh:613
+#: git-submodule.sh:683
#, sh-format
-msgid "Cleared directory '$sm_path'"
+msgid "Cleared directory '$displaypath'"
msgstr ""
-#: git-submodule.sh:614
+#: git-submodule.sh:684
#, sh-format
-msgid "Could not remove submodule work tree '$sm_path'"
+msgid "Could not remove submodule work tree '$displaypath'"
msgstr ""
-#: git-submodule.sh:617
+#: git-submodule.sh:687
#, sh-format
-msgid "Could not create empty submodule directory '$sm_path'"
+msgid "Could not create empty submodule directory '$displaypath'"
msgstr ""
-#: git-submodule.sh:626
+#: git-submodule.sh:696
#, sh-format
-msgid "Submodule '$name' ($url) unregistered for path '$sm_path'"
+msgid "Submodule '$name' ($url) unregistered for path '$displaypath'"
msgstr ""
-#: git-submodule.sh:731
+#: git-submodule.sh:811
#, sh-format
msgid ""
-"Submodule path '$prefix$sm_path' not initialized\n"
+"Submodule path '$displaypath' not initialized\n"
"Maybe you want to use 'update --init'?"
msgstr ""
-#: git-submodule.sh:744
+#: git-submodule.sh:824
#, sh-format
-msgid "Unable to find current revision in submodule path '$prefix$sm_path'"
+msgid "Unable to find current revision in submodule path '$displaypath'"
msgstr ""
-#: git-submodule.sh:753
+#: git-submodule.sh:833
#, sh-format
msgid "Unable to fetch in submodule path '$sm_path'"
msgstr ""
-#: git-submodule.sh:777
+#: git-submodule.sh:857
#, sh-format
-msgid "Unable to fetch in submodule path '$prefix$sm_path'"
+msgid "Unable to fetch in submodule path '$displaypath'"
msgstr ""
-#: git-submodule.sh:791
+#: git-submodule.sh:871
#, sh-format
-msgid "Unable to rebase '$sha1' in submodule path '$prefix$sm_path'"
+msgid "Unable to rebase '$sha1' in submodule path '$displaypath'"
msgstr ""
-#: git-submodule.sh:792
+#: git-submodule.sh:872
#, sh-format
-msgid "Submodule path '$prefix$sm_path': rebased into '$sha1'"
+msgid "Submodule path '$displaypath': rebased into '$sha1'"
msgstr ""
-#: git-submodule.sh:797
+#: git-submodule.sh:877
#, sh-format
-msgid "Unable to merge '$sha1' in submodule path '$prefix$sm_path'"
+msgid "Unable to merge '$sha1' in submodule path '$displaypath'"
msgstr ""
-#: git-submodule.sh:798
+#: git-submodule.sh:878
#, sh-format
-msgid "Submodule path '$prefix$sm_path': merged in '$sha1'"
+msgid "Submodule path '$displaypath': merged in '$sha1'"
msgstr ""
-#: git-submodule.sh:803
+#: git-submodule.sh:883
#, sh-format
-msgid "Unable to checkout '$sha1' in submodule path '$prefix$sm_path'"
+msgid ""
+"Execution of '$command $sha1' failed in submodule path '$prefix$sm_path'"
msgstr ""
-#: git-submodule.sh:804
+#: git-submodule.sh:884
#, sh-format
-msgid "Submodule path '$prefix$sm_path': checked out '$sha1'"
+msgid "Submodule path '$prefix$sm_path': '$command $sha1'"
msgstr ""
-#: git-submodule.sh:831
+#: git-submodule.sh:889
#, sh-format
-msgid "Failed to recurse into submodule path '$prefix$sm_path'"
+msgid "Unable to checkout '$sha1' in submodule path '$displaypath'"
msgstr ""
-#: git-submodule.sh:939
+#: git-submodule.sh:890
+#, sh-format
+msgid "Submodule path '$displaypath': checked out '$sha1'"
+msgstr ""
+
+#: git-submodule.sh:917
+#, sh-format
+msgid "Failed to recurse into submodule path '$displaypath'"
+msgstr ""
+
+#: git-submodule.sh:1025
msgid "The --cached option cannot be used with the --files option"
msgstr ""
#. unexpected type
-#: git-submodule.sh:979
+#: git-submodule.sh:1066
#, sh-format
msgid "unexpected mode $mod_dst"
msgstr ""
-#: git-submodule.sh:997
+#: git-submodule.sh:1086
#, sh-format
-msgid " Warn: $name doesn't contain commit $sha1_src"
+msgid " Warn: $display_name doesn't contain commit $sha1_src"
msgstr ""
-#: git-submodule.sh:1000
+#: git-submodule.sh:1089
#, sh-format
-msgid " Warn: $name doesn't contain commit $sha1_dst"
+msgid " Warn: $display_name doesn't contain commit $sha1_dst"
msgstr ""
-#: git-submodule.sh:1003
+#: git-submodule.sh:1092
#, sh-format
-msgid " Warn: $name doesn't contain commits $sha1_src and $sha1_dst"
+msgid " Warn: $display_name doesn't contain commits $sha1_src and $sha1_dst"
msgstr ""
-#: git-submodule.sh:1028
+#: git-submodule.sh:1117
msgid "blob"
msgstr ""
-#: git-submodule.sh:1066
+#: git-submodule.sh:1155
msgid "Submodules changed but not updated:"
msgstr ""
-#: git-submodule.sh:1068
+#: git-submodule.sh:1157
msgid "Submodule changes to be committed:"
msgstr ""
-#: git-submodule.sh:1153
+#: git-submodule.sh:1242
#, sh-format
msgid "Failed to recurse into submodule path '$sm_path'"
msgstr ""
-#: git-submodule.sh:1216
+#: git-submodule.sh:1306
#, sh-format
-msgid "Synchronizing submodule url for '$prefix$sm_path'"
+msgid "Synchronizing submodule url for '$displaypath'"
msgstr ""
# Vietnamese translation for GIT-CORE.
-# Copyright (C) 2012-2013 Trần Ngọc Quân.
# This file is distributed under the same license as the git-core package.
# First translated by Trần Ngọc Quân <vnwildman@gmail.com>, 2012-2013.
# Nguyễn Thái Ngọc Duy <pclouds@gmail.com>, 2012.
#
msgid ""
msgstr ""
-"Project-Id-Version: git-v1.8.3-rc0-20-gc6bc7\n"
+"Project-Id-Version: git-v1.8.4-rc0-1-g28b3cff\n"
"Report-Msgid-Bugs-To: Git Mailing List <git@vger.kernel.org>\n"
-"POT-Creation-Date: 2013-04-30 08:25+0800\n"
-"PO-Revision-Date: 2013-05-01 14:26+0700\n"
+"POT-Creation-Date: 2013-07-26 14:19+0800\n"
+"PO-Revision-Date: 2013-07-27 09:44+0700\n"
"Last-Translator: Trần Ngọc Quân <vnwildman@gmail.com>\n"
"Language-Team: Vietnamese <translation-team-vi@lists.sourceforge.net>\n"
"Language: vi\n"
"X-Poedit-Basepath: ../\n"
"X-Generator: Poedit 1.5.5\n"
-#: advice.c:53
+#: advice.c:57
#, c-format
msgid "hint: %.*s\n"
msgstr "gợi ý: %.*s\n"
#. * Message used both when 'git commit' fails and when
#. * other commands doing a merge do.
#.
-#: advice.c:83
+#: advice.c:87
msgid ""
"Fix them up in the work tree,\n"
"and then use 'git add/rm <file>' as\n"
msgid "archive format"
msgstr "định dạng lưu trữ"
-#: archive.c:324 builtin/log.c:1126
+#: archive.c:324 builtin/log.c:1173
msgid "prefix"
msgstr "tiền tố"
msgid "prepend prefix to each pathname in the archive"
msgstr "nối thêm tiền tố vào từng đường dẫn tập tin trong kho lưu"
-#: archive.c:326 builtin/archive.c:88 builtin/blame.c:2371
-#: builtin/blame.c:2372 builtin/config.c:55 builtin/fast-export.c:665
-#: builtin/fast-export.c:667 builtin/grep.c:715 builtin/hash-object.c:77
-#: builtin/ls-files.c:490 builtin/ls-files.c:493 builtin/notes.c:536
-#: builtin/notes.c:693 builtin/read-tree.c:107 parse-options.h:149
+#: archive.c:326 builtin/archive.c:88 builtin/blame.c:2292
+#: builtin/blame.c:2293 builtin/config.c:56 builtin/fast-export.c:673
+#: builtin/fast-export.c:675 builtin/grep.c:714 builtin/hash-object.c:77
+#: builtin/ls-files.c:496 builtin/ls-files.c:499 builtin/notes.c:408
+#: builtin/notes.c:565 builtin/read-tree.c:108 parse-options.h:152
msgid "file"
msgstr "tập-tin"
msgid "list supported archive formats"
msgstr "liệt kê các kiểu nén được hỗ trợ"
-#: archive.c:345 builtin/archive.c:90 builtin/clone.c:86
+#: archive.c:345 builtin/archive.c:90 builtin/clone.c:85
msgid "repo"
msgstr "kho"
msgid "retrieve the archive from remote repository <repo>"
msgstr "nhận kho lưu từ kho chứa <kho> trên máy chủ"
-#: archive.c:347 builtin/archive.c:92 builtin/notes.c:615
+#: archive.c:347 builtin/archive.c:92 builtin/notes.c:487
msgid "command"
msgstr "lệnh"
msgid "Cannot force update the current branch."
msgstr "Không thể ép buộc cập nhật nhánh hiện hành."
-#: branch.c:201
+#: branch.c:216
#, c-format
msgid "Cannot setup tracking information; starting point '%s' is not a branch."
msgstr ""
"Không thể cài đặt thông tin theo vết; điểm bắt đầu “%s” không phải là một "
"nhánh."
-#: branch.c:203
+#: branch.c:218
#, c-format
msgid "the requested upstream branch '%s' does not exist"
msgstr "nhánh dòng ngược đã yêu cầu “%s” chưa sẵn có"
-#: branch.c:205
+#: branch.c:220
msgid ""
"\n"
"If you are planning on basing your work on an upstream\n"
"sẽ theo dõi bản đối chiếu máy chủ của nó, bạn cần dùng lệnh\n"
"\"git push -u\" để đặt cấu hình dòng ngược bạn muốn push."
-#: branch.c:250
+#: branch.c:265
#, c-format
msgid "Not a valid object name: '%s'."
msgstr "Không phải tên đối tượng hợp lệ: “%s”."
-#: branch.c:270
+#: branch.c:285
#, c-format
msgid "Ambiguous object name: '%s'."
msgstr "Tên đối tượng chưa rõ ràng: “%s”."
-#: branch.c:275
+#: branch.c:290
#, c-format
msgid "Not a valid branch point: '%s'."
msgstr "Nhánh không hợp lệ: “%s”."
-#: branch.c:281
+#: branch.c:296
msgid "Failed to lock ref for update"
msgstr "Gặp lỗi khi khóa tham chiếu (ref) để cập nhật"
-#: branch.c:299
+#: branch.c:314
msgid "Failed to write ref"
msgstr "Gặp lỗi khi ghi tham chiếu (ref)"
msgid "unrecognized header: %s%s (%d)"
msgstr "phần đầu (header) không được thừa nhận: %s%s (%d)"
-#: bundle.c:89 builtin/commit.c:676
+#: bundle.c:89 builtin/commit.c:683
#, c-format
msgid "could not open '%s'"
msgstr "không thể mở “%s”"
msgid "Repository lacks these prerequisite commits:"
msgstr "Kho chứa thiếu những lần chuyển giao (commit) cần trước hết này:"
-#: bundle.c:164 sequencer.c:651 sequencer.c:1101 builtin/log.c:300
-#: builtin/log.c:770 builtin/log.c:1344 builtin/log.c:1570 builtin/merge.c:349
-#: builtin/shortlog.c:155
+#: bundle.c:164 sequencer.c:661 sequencer.c:1111 builtin/log.c:331
+#: builtin/log.c:801 builtin/log.c:1399 builtin/log.c:1625 builtin/merge.c:364
+#: builtin/shortlog.c:156
msgid "revision walk setup failed"
-msgstr "cài đặt việc di chuyển qua các điểm xét lại gặp lỗi"
+msgstr "cài đặt việc di chuyển qua các điểm xét duyệt gặp lỗi"
#: bundle.c:186
#, c-format
msgid "rev-list died"
msgstr "rev-list đã chết"
-#: bundle.c:300 builtin/log.c:1255 builtin/shortlog.c:258
+#: bundle.c:300 builtin/log.c:1310 builtin/shortlog.c:259
#, c-format
msgid "unrecognized argument: %s"
msgstr "đối số không được thừa nhận: %s"
msgid "index-pack died"
msgstr "index-pack đã chết"
-#: commit.c:50
+#: commit.c:53
#, c-format
msgid "could not parse %s"
msgstr "không thể phân tích %s"
-#: commit.c:52
+#: commit.c:55
#, c-format
msgid "%s %s is not a commit!"
msgstr "%s %s không phải là một lần commit!"
msgid "memory exhausted"
msgstr "hết bộ nhớ"
-#: connected.c:39
+#: connected.c:60
msgid "Could not run 'git rev-list'"
msgstr "Không thể chạy “git rev-list”"
-#: connected.c:48
+#: connected.c:80
#, c-format
msgid "failed write to rev-list: %s"
msgstr "gặp lỗi khi ghi vào rev-list: %s"
-#: connected.c:56
+#: connected.c:88
#, c-format
msgid "failed to close rev-list's stdin: %s"
msgstr "gặp lỗi khi đóng đầu vào chuẩn stdin của rev-list: %s"
"Tìm thấy các lỗi trong biến cấu hình “diff.dirstat”:\n"
"%s"
-#: diff.c:3481
+#: diff.c:3487
#, c-format
msgid ""
"Failed to parse --dirstat/-X option parameter:\n"
"Gặp lỗi khi phân tích đối số tùy chọn --dirstat/-X:\n"
"%s"
-#: diff.c:3495
+#: diff.c:3501
#, c-format
msgid "Failed to parse --submodule option parameter: '%s'"
msgstr "Gặp lỗi khi phân tích đối số tùy chọn --submodule: “%s”"
msgid "'%s': short read %s"
msgstr "“%s”: đọc ngắn %s"
-#: help.c:212
+#: help.c:213
#, c-format
msgid "available git commands in '%s'"
-msgstr "các lệnh git sẵn sàng để dùng trong “%s”"
+msgstr "các lệnh git sẵn có trong thư mục “%s”:"
-#: help.c:219
+#: help.c:220
msgid "git commands available from elsewhere on your $PATH"
msgstr "các lệnh git sẵn sàng để dùng từ một nơi khác trong $PATH của bạn"
-#: help.c:235
+#: help.c:236
msgid "The most commonly used git commands are:"
msgstr "Những lệnh git hay được sử dụng nhất là:"
-#: help.c:292
+#: help.c:293
#, c-format
msgid ""
"'%s' appears to be a git command, but we were not\n"
"“%s” trông như là một lệnh git, nhưng chúng tôi không\n"
"thể thực thi nó. Có lẽ là lệnh git-%s đã bị hỏng?"
-#: help.c:349
+#: help.c:350
msgid "Uh oh. Your system reports no Git commands at all."
msgstr "Ối chà. Hệ thống của bạn báo rằng chẳng có lệnh Git nào cả."
-#: help.c:371
+#: help.c:372
#, c-format
msgid ""
"WARNING: You called a Git command named '%s', which does not exist.\n"
"CẢNH BÁO: Bạn đã gọi lệnh Git có tên “%s”, mà nó lại không có sẵn.\n"
"Giả định rằng ý bạn là “%s”"
-#: help.c:376
+#: help.c:377
#, c-format
msgid "in %0.1f seconds automatically..."
msgstr "trong %0.1f giây một cách tự động..."
-#: help.c:383
+#: help.c:384
#, c-format
msgid "git: '%s' is not a git command. See 'git --help'."
msgstr "git: “%s” không phải là một lệnh của git. Xem “git --help”."
-#: help.c:387
+#: help.c:388 help.c:447
msgid ""
"\n"
"Did you mean this?"
"\n"
"Có phải ý bạn là một trong số những cái này không?"
+#: help.c:443
+#, c-format
+msgid "%s: %s - %s"
+msgstr "%s: %s - %s"
+
#: merge.c:56
msgid "failed to read the cache"
msgstr "gặp lỗi khi đọc bộ nhớ tạm"
#: merge.c:110 builtin/checkout.c:365 builtin/checkout.c:566
-#: builtin/clone.c:645
+#: builtin/clone.c:656
msgid "unable to write new index file"
msgstr "không thể ghi tập tin lưu bảng mục lục mới"
msgid "addinfo_cache failed for path '%s'"
msgstr "addinfo_cache gặp lỗi đối với đường dẫn “%s”"
-#: merge-recursive.c:268
+#: merge-recursive.c:269
msgid "error building trees"
msgstr "gặp lỗi khi xây dựng cây"
-#: merge-recursive.c:672
+#: merge-recursive.c:673
#, c-format
msgid "failed to create path '%s'%s"
msgstr "gặp lỗi khi tạo đường dẫn “%s”%s"
-#: merge-recursive.c:683
+#: merge-recursive.c:684
#, c-format
msgid "Removing %s to make room for subdirectory\n"
msgstr "Gỡ bỏ %s để tạo chỗ (room) cho thư mục con\n"
#. something else exists
#. .. but not some other error (who really cares what?)
-#: merge-recursive.c:697 merge-recursive.c:718
+#: merge-recursive.c:698 merge-recursive.c:719
msgid ": perhaps a D/F conflict?"
msgstr ": có lẽ là một xung đột D/F?"
-#: merge-recursive.c:708
+#: merge-recursive.c:709
#, c-format
msgid "refusing to lose untracked file at '%s'"
msgstr "từ chối đóng tập tin không được theo vết tại “%s”"
-#: merge-recursive.c:748
+#: merge-recursive.c:749
#, c-format
msgid "cannot read object %s '%s'"
msgstr "không thể đọc đối tượng %s “%s”"
-#: merge-recursive.c:750
+#: merge-recursive.c:751
#, c-format
msgid "blob expected for %s '%s'"
msgstr "đối tượng blob được mong đợi cho %s “%s”"
-#: merge-recursive.c:773 builtin/clone.c:313
+#: merge-recursive.c:774 builtin/clone.c:312
#, c-format
msgid "failed to open '%s'"
msgstr "gặp lỗi khi mở “%s”"
-#: merge-recursive.c:781
+#: merge-recursive.c:782
#, c-format
msgid "failed to symlink '%s'"
msgstr "gặp lỗi khi tạo liên kết tượng trưng (symlink) “%s”"
-#: merge-recursive.c:784
+#: merge-recursive.c:785
#, c-format
msgid "do not know what to do with %06o %s '%s'"
msgstr "không hiểu phải làm gì với %06o %s “%s”"
-#: merge-recursive.c:922
+#: merge-recursive.c:923
msgid "Failed to execute internal merge"
msgstr "Gặp lỗi khi thực hiện trộn nội bộ"
-#: merge-recursive.c:926
+#: merge-recursive.c:927
#, c-format
msgid "Unable to add %s to database"
msgstr "Không thể thêm %s vào cơ sở dữ liệu"
-#: merge-recursive.c:942
+#: merge-recursive.c:943
msgid "unsupported object type in the tree"
msgstr "kiểu đối tượng không được hỗ trợ trong cây (tree)"
-#: merge-recursive.c:1021 merge-recursive.c:1035
+#: merge-recursive.c:1022 merge-recursive.c:1036
#, c-format
msgid ""
"CONFLICT (%s/delete): %s deleted in %s and %s in %s. Version %s of %s left "
"XUNG ĐỘT (%s/xóa): %s bị xóa trong %s và %s trong %s. Phiên bản %s của %s "
"còn lại trong cây (tree)."
-#: merge-recursive.c:1027 merge-recursive.c:1040
+#: merge-recursive.c:1028 merge-recursive.c:1041
#, c-format
msgid ""
"CONFLICT (%s/delete): %s deleted in %s and %s in %s. Version %s of %s left "
"XUNG ĐỘT (%s/xóa): %s bị xóa trong %s và %s trong %s. Phiên bản %s của %s "
"còn lại trong cây (tree) tại %s."
-#: merge-recursive.c:1081
+#: merge-recursive.c:1082
msgid "rename"
msgstr "đổi tên"
-#: merge-recursive.c:1081
+#: merge-recursive.c:1082
msgid "renamed"
msgstr "đã đổi tên"
-#: merge-recursive.c:1137
+#: merge-recursive.c:1138
#, c-format
msgid "%s is a directory in %s adding as %s instead"
msgstr "%s là một thư mục trong %s thay vào đó thêm vào như là %s"
-#: merge-recursive.c:1159
+#: merge-recursive.c:1160
#, c-format
msgid ""
"CONFLICT (rename/rename): Rename \"%s\"->\"%s\" in branch \"%s\" rename \"%s"
"XUNG ĐỘT (đổi-tên/đổi-tên): Đổi tên \"%s\"->\"%s\" trong nhánh \"%s\" đổi "
"tên \"%s\"->\"%s\" trong \"%s\"%s"
-#: merge-recursive.c:1164
+#: merge-recursive.c:1165
msgid " (left unresolved)"
msgstr " (cần giải quyết)"
-#: merge-recursive.c:1218
+#: merge-recursive.c:1219
#, c-format
msgid "CONFLICT (rename/rename): Rename %s->%s in %s. Rename %s->%s in %s"
msgstr ""
"XUNG ĐỘT (đổi-tên/đổi-tên): Đổi tên %s->%s trong %s. Đổi tên %s->%s trong %s"
-#: merge-recursive.c:1248
+#: merge-recursive.c:1249
#, c-format
msgid "Renaming %s to %s and %s to %s instead"
msgstr "Đang đổi tên %s thành %s thay vì %s thành %s"
-#: merge-recursive.c:1447
+#: merge-recursive.c:1448
#, c-format
msgid "CONFLICT (rename/add): Rename %s->%s in %s. %s added in %s"
msgstr ""
"XUNG ĐỘT (đổi-tên/thêm): Đổi tên %s->%s trong %s. %s được thêm vào trong %s"
-#: merge-recursive.c:1457
+#: merge-recursive.c:1458
#, c-format
msgid "Adding merged %s"
msgstr "Thêm hòa trộn %s"
-#: merge-recursive.c:1462 merge-recursive.c:1660
+#: merge-recursive.c:1463 merge-recursive.c:1661
#, c-format
msgid "Adding as %s instead"
msgstr "Thay vào đó thêm vào %s"
-#: merge-recursive.c:1513
+#: merge-recursive.c:1514
#, c-format
msgid "cannot read object %s"
msgstr "không thể đọc đối tượng %s"
-#: merge-recursive.c:1516
+#: merge-recursive.c:1517
#, c-format
msgid "object %s is not a blob"
msgstr "đối tượng %s không phải là một blob"
-#: merge-recursive.c:1564
+#: merge-recursive.c:1565
msgid "modify"
msgstr "sửa đổi"
-#: merge-recursive.c:1564
+#: merge-recursive.c:1565
msgid "modified"
msgstr "đã sửa"
-#: merge-recursive.c:1574
+#: merge-recursive.c:1575
msgid "content"
msgstr "nội dung"
-#: merge-recursive.c:1581
+#: merge-recursive.c:1582
msgid "add/add"
msgstr "thêm/thêm"
-#: merge-recursive.c:1615
+#: merge-recursive.c:1616
#, c-format
msgid "Skipped %s (merged same as existing)"
msgstr "Đã bỏ qua %s (đã có sẵn lần hòa trộn này)"
-#: merge-recursive.c:1629
+#: merge-recursive.c:1630
#, c-format
msgid "Auto-merging %s"
msgstr "Tự-động-hòa-trộn %s"
-#: merge-recursive.c:1633 git-submodule.sh:1029
+#: merge-recursive.c:1634 git-submodule.sh:1118
msgid "submodule"
msgstr "mô-đun-con"
-#: merge-recursive.c:1634
+#: merge-recursive.c:1635
#, c-format
msgid "CONFLICT (%s): Merge conflict in %s"
msgstr "XUNG ĐỘT (%s): Xung đột hòa trộn trong %s"
-#: merge-recursive.c:1724
+#: merge-recursive.c:1725
#, c-format
msgid "Removing %s"
msgstr "Đang xóa %s"
-#: merge-recursive.c:1749
+#: merge-recursive.c:1750
msgid "file/directory"
msgstr "tập-tin/thư-mục"
-#: merge-recursive.c:1755
+#: merge-recursive.c:1756
msgid "directory/file"
msgstr "thư-mục/tập tin"
-#: merge-recursive.c:1760
+#: merge-recursive.c:1761
#, c-format
msgid "CONFLICT (%s): There is a directory with name %s in %s. Adding %s as %s"
msgstr ""
"XUNG ĐỘT (%s): Ở đây không có thư mục nào có tên %s trong %s. Thêm %s như là "
"%s"
-#: merge-recursive.c:1770
+#: merge-recursive.c:1771
#, c-format
msgid "Adding %s"
msgstr "Thêm \"%s\""
-#: merge-recursive.c:1787
+#: merge-recursive.c:1788
msgid "Fatal merge failure, shouldn't happen."
msgstr "Việc hòa trộn hỏng nghiêm trọng, không nên để xảy ra."
-#: merge-recursive.c:1806
+#: merge-recursive.c:1807
msgid "Already up-to-date!"
msgstr "Đã cập nhật rồi!"
-#: merge-recursive.c:1815
+#: merge-recursive.c:1816
#, c-format
msgid "merging of trees %s and %s failed"
msgstr "hòa trộn cây (tree) %s và %s gặp lỗi"
-#: merge-recursive.c:1845
+#: merge-recursive.c:1846
#, c-format
msgid "Unprocessed path??? %s"
msgstr "Đường dẫn chưa được xử lý??? %s"
-#: merge-recursive.c:1890
+#: merge-recursive.c:1891
msgid "Merging:"
msgstr "Đang trộn:"
-#: merge-recursive.c:1903
+#: merge-recursive.c:1904
#, c-format
msgid "found %u common ancestor:"
msgid_plural "found %u common ancestors:"
msgstr[0] "tìm thấy %u tổ tiên chung:"
msgstr[1] "tìm thấy %u tổ tiên chung:"
-#: merge-recursive.c:1940
+#: merge-recursive.c:1941
msgid "merge returned no commit"
msgstr "hòa trộn không trả về lần chuyển giao (commit) nào"
-#: merge-recursive.c:1997
+#: merge-recursive.c:1998
#, c-format
msgid "Could not parse object '%s'"
msgstr "Không thể phân tích đối tượng “%s”"
-#: merge-recursive.c:2009 builtin/merge.c:658
+#: merge-recursive.c:2010 builtin/merge.c:672
msgid "Unable to write index."
msgstr "Không thể ghi bảng mục lục"
-#: object.c:195
+#: notes-utils.c:40
+msgid "Cannot commit uninitialized/unreferenced notes tree"
+msgstr ""
+"Không thể chuyển giao (commit) chưa được khởi tạo hoặc không được tham chiếu "
+"cây ghi chú"
+
+#: notes-utils.c:81
+#, c-format
+msgid "Bad notes.rewriteMode value: '%s'"
+msgstr "Giá trị notes.rewriteMode sai: “%s”"
+
+#: notes-utils.c:91
+#, c-format
+msgid "Refusing to rewrite notes in %s (outside of refs/notes/)"
+msgstr "Từ chối ghi đè ghi chú trong %s (nằm ngoài của refs/notes/)"
+
+#. TRANSLATORS: The first %s is the name of the
+#. environment variable, the second %s is its value
+#: notes-utils.c:118
+#, c-format
+msgid "Bad %s value: '%s'"
+msgstr "Giá trị %s sai: “%s”"
+
+#: object.c:204
#, c-format
msgid "unable to parse object: %s"
msgstr "không thể phân tích đối tượng: “%s”"
msgid "'%s' is beyond a symbolic link"
msgstr "“%s” nằm ngoài một liên kết tượng trưng"
-#: remote.c:1781
+#: remote.c:1788
#, c-format
msgid "Your branch is ahead of '%s' by %d commit.\n"
msgid_plural "Your branch is ahead of '%s' by %d commits.\n"
msgstr[0] "Nhánh của bạn là đầu của “%s” bởi %d lần chuyển giao (commit).\n"
msgstr[1] "Nhánh của bạn là đầu của “%s” bởi %d lần chuyển giao (commit).\n"
-#: remote.c:1787
+#: remote.c:1794
msgid " (use \"git push\" to publish your local commits)\n"
msgstr " (dùng \"git push\" để xuất bản các lần chuyển giao nội bộ của bạn)\n"
-#: remote.c:1790
+#: remote.c:1797
#, c-format
msgid "Your branch is behind '%s' by %d commit, and can be fast-forwarded.\n"
msgid_plural ""
"Nhánh của bạn thì ở đằng sau “%s” bởi %d lần chuyển giao (commit), và có thể "
"được fast-forward.\n"
-#: remote.c:1798
+#: remote.c:1805
msgid " (use \"git pull\" to update your local branch)\n"
msgstr " (dùng \"git pull\" để cập nhật nhánh nội bộ của bạn)\n"
-#: remote.c:1801
+#: remote.c:1808
#, c-format
msgid ""
"Your branch and '%s' have diverged,\n"
"Your branch and “%s” have diverged,\n"
"and have %d and %d different commit each, respectively.\n"
-#: remote.c:1811
+#: remote.c:1818
msgid " (use \"git pull\" to merge the remote branch into yours)\n"
msgstr ""
" (dùng \"git pull\" để hòa trộn nhánh trên máy chủ vào trong nhánh của "
"bạn)\n"
-#: sequencer.c:206 builtin/merge.c:776 builtin/merge.c:889 builtin/merge.c:999
-#: builtin/merge.c:1009
+#: run-command.c:80
+msgid "open /dev/null failed"
+msgstr "gặp lỗi khi mở /dev/null"
+
+#: run-command.c:82
+#, c-format
+msgid "dup2(%d,%d) failed"
+msgstr "dup2(%d,%d) gặp lỗi"
+
+#: sequencer.c:206 builtin/merge.c:790 builtin/merge.c:903
+#: builtin/merge.c:1013 builtin/merge.c:1023
#, c-format
msgid "Could not open '%s' for writing"
msgstr "Không thể mở “%s” để ghi"
-#: sequencer.c:208 builtin/merge.c:335 builtin/merge.c:779
-#: builtin/merge.c:1001 builtin/merge.c:1014
+#: sequencer.c:208 builtin/merge.c:350 builtin/merge.c:793
+#: builtin/merge.c:1015 builtin/merge.c:1028
#, c-format
msgid "Could not write to '%s'"
msgstr "Không thể ghi vào “%s”"
"với lệnh “git add <đường_dẫn>” hoặc “git rm <đường_dẫn>”\n"
"và chuyển giao (commit) kết quả bằng lệnh “git commit”"
-#: sequencer.c:245 sequencer.c:859 sequencer.c:942
+#: sequencer.c:245 sequencer.c:869 sequencer.c:952
#, c-format
msgid "Could not write to %s"
msgstr "Không thể ghi vào %s"
msgstr "Chuyển giao (commit) các thay đổi của bạn hay stash chúng để xử lý."
#. TRANSLATORS: %s will be "revert" or "cherry-pick"
-#: sequencer.c:319
+#: sequencer.c:324
#, c-format
msgid "%s: Unable to write new index file"
msgstr "%s: Không thể ghi tập tin lưu bảng mục lục mới"
-#: sequencer.c:350
+#: sequencer.c:355
msgid "Could not resolve HEAD commit\n"
msgstr "Không thể phân giải commit (lần chuyển giao) HEAD\n"
-#: sequencer.c:371
+#: sequencer.c:377
msgid "Unable to update cache tree\n"
msgstr "Không thể cập nhật cây bộ nhớ đệm\n"
-#: sequencer.c:416
+#: sequencer.c:422
#, c-format
msgid "Could not parse commit %s\n"
msgstr "Không thể phân tích commit (lần chuyển giao) %s\n"
-#: sequencer.c:421
+#: sequencer.c:427
#, c-format
msgid "Could not parse parent commit %s\n"
msgstr "Không thể phân tích commit (lần chuyển giao) cha mẹ %s\n"
-#: sequencer.c:487
+#: sequencer.c:493
msgid "Your index file is unmerged."
msgstr "Tập tin lưu mục lục của bạn không được hòa trộn."
-#: sequencer.c:506
+#: sequencer.c:512
#, c-format
msgid "Commit %s is a merge but no -m option was given."
msgstr ""
"Lần chuyển giao (commit) %s là một lần hòa trộn nhưng không đưa ra tùy chọn -"
"m."
-#: sequencer.c:514
+#: sequencer.c:520
#, c-format
msgid "Commit %s does not have parent %d"
msgstr "Lần chuyển giao (commit) %s không có cha mẹ %d"
-#: sequencer.c:518
+#: sequencer.c:524
#, c-format
msgid "Mainline was specified but commit %s is not a merge."
msgstr ""
#. TRANSLATORS: The first %s will be "revert" or
#. "cherry-pick", the second %s a SHA1
-#: sequencer.c:531
+#: sequencer.c:537
#, c-format
msgid "%s: cannot parse parent commit %s"
msgstr "%s: không thể phân tích lần chuyển giao mẹ của %s"
-#: sequencer.c:535
+#: sequencer.c:541
#, c-format
msgid "Cannot get commit message for %s"
msgstr "Không thể lấy thông điệp lần chuyển giao (commit) cho %s"
-#: sequencer.c:621
+#: sequencer.c:627
#, c-format
msgid "could not revert %s... %s"
msgstr "không thể revert %s... %s"
-#: sequencer.c:622
+#: sequencer.c:628
#, c-format
msgid "could not apply %s... %s"
msgstr "không thể apply (áp dụng miếng vá) %s... %s"
-#: sequencer.c:654
+#: sequencer.c:664
msgid "empty commit set passed"
msgstr "lần chuyển giao (commit) trống rỗng đặt là hợp quy cách"
-#: sequencer.c:662
+#: sequencer.c:672
#, c-format
msgid "git %s: failed to read the index"
msgstr "git %s: gặp lỗi đọc bảng mục lục"
-#: sequencer.c:667
+#: sequencer.c:677
#, c-format
msgid "git %s: failed to refresh the index"
msgstr "git %s: gặp lỗi khi làm tươi mới bảng mục lục"
-#: sequencer.c:725
+#: sequencer.c:735
#, c-format
msgid "Cannot %s during a %s"
msgstr "Không thể %s trong khi %s"
-#: sequencer.c:747
+#: sequencer.c:757
#, c-format
msgid "Could not parse line %d."
msgstr "Không phân tích được dòng %d."
-#: sequencer.c:752
+#: sequencer.c:762
msgid "No commits parsed."
msgstr "Không có lần chuyển giao (commit) nào được phân tích."
-#: sequencer.c:765
+#: sequencer.c:775
#, c-format
msgid "Could not open %s"
msgstr "Không thể mở %s"
-#: sequencer.c:769
+#: sequencer.c:779
#, c-format
msgid "Could not read %s."
msgstr "Không thể đọc %s."
-#: sequencer.c:776
+#: sequencer.c:786
#, c-format
msgid "Unusable instruction sheet: %s"
msgstr "Bảng chỉ thị không thể dùng được: %s"
-#: sequencer.c:804
+#: sequencer.c:814
#, c-format
msgid "Invalid key: %s"
msgstr "Khóa không đúng: %s"
-#: sequencer.c:807
+#: sequencer.c:817
#, c-format
msgid "Invalid value for %s: %s"
msgstr "Giá trị không hợp lệ %s: %s"
-#: sequencer.c:819
+#: sequencer.c:829
#, c-format
msgid "Malformed options sheet: %s"
msgstr "Bảng tùy chọn dị hình: %s"
-#: sequencer.c:840
+#: sequencer.c:850
msgid "a cherry-pick or revert is already in progress"
msgstr "một thao tác cherry-pick hoặc revert đang được thực hiện"
-#: sequencer.c:841
+#: sequencer.c:851
msgid "try \"git cherry-pick (--continue | --quit | --abort)\""
msgstr "hãy thử \"git cherry-pick (--continue | --quit | --abort)\""
-#: sequencer.c:845
+#: sequencer.c:855
#, c-format
msgid "Could not create sequencer directory %s"
msgstr "Không thể tạo thư mục xếp dãy %s"
-#: sequencer.c:861 sequencer.c:946
+#: sequencer.c:871 sequencer.c:956
#, c-format
msgid "Error wrapping up %s."
msgstr "Lỗi bao bọc %s."
-#: sequencer.c:880 sequencer.c:1014
+#: sequencer.c:890 sequencer.c:1024
msgid "no cherry-pick or revert in progress"
msgstr "không cherry-pick hay revert trong tiến trình"
-#: sequencer.c:882
+#: sequencer.c:892
msgid "cannot resolve HEAD"
msgstr "không thể phân giải HEAD"
-#: sequencer.c:884
+#: sequencer.c:894
msgid "cannot abort from a branch yet to be born"
msgstr "không thể hủy bỏ từ một nhánh mà nó còn chưa được tạo ra"
-#: sequencer.c:906 builtin/apply.c:4060
+#: sequencer.c:916 builtin/apply.c:4061
#, c-format
msgid "cannot open %s: %s"
msgstr "không thể mở %s: %s"
-#: sequencer.c:909
+#: sequencer.c:919
#, c-format
msgid "cannot read %s: %s"
msgstr "không thể đọc %s: %s"
-#: sequencer.c:910
+#: sequencer.c:920
msgid "unexpected end of file"
msgstr "kết thúc tập tin đột xuất"
-#: sequencer.c:916
+#: sequencer.c:926
#, c-format
msgid "stored pre-cherry-pick HEAD file '%s' is corrupt"
msgstr "tập tin HEAD “pre-cherry-pick” đã lưu “%s” bị hỏng"
-#: sequencer.c:939
+#: sequencer.c:949
#, c-format
msgid "Could not format %s."
msgstr "Không thể định dạng %s."
-#: sequencer.c:1083
+#: sequencer.c:1092
#, c-format
msgid "%s: can't cherry-pick a %s"
msgstr "%s: không thể cherry-pick một %s"
-#: sequencer.c:1085
+#: sequencer.c:1095
#, c-format
msgid "%s: bad revision"
msgstr "%s: điểm xét duyệt sai"
-#: sequencer.c:1119
+#: sequencer.c:1129
msgid "Can't revert as initial commit"
msgstr "Không thể revert một lần chuyển giao (commit) khởi tạo"
-#: sequencer.c:1120
+#: sequencer.c:1130
msgid "Can't cherry-pick into empty head"
msgstr "Không thể cherry-pick vào một đầu (head) trống rỗng"
-#: sha1_name.c:1036
+#: sha1_name.c:440
+msgid ""
+"Git normally never creates a ref that ends with 40 hex characters\n"
+"because it will be ignored when you just specify 40-hex. These refs\n"
+"may be created by mistake. For example,\n"
+"\n"
+" git checkout -b $br $(git rev-parse ...)\n"
+"\n"
+"where \"$br\" is somehow empty and a 40-hex ref is created. Please\n"
+"examine these refs and maybe delete them. Turn this message off by\n"
+"running \"git config advice.object_name_warning false\""
+msgstr ""
+"Git thường không bao giờ tạo tham chiếu mà nó kết thúc với 40 ký tự hex\n"
+"bởi vì nó sẽ bị bỏ qua khi bạn chỉ định 40-hex. Những tham chiếu này\n"
+"có lẽ được tạo ra bởi một sai sót nào đó. Ví dụ,\n"
+"\n"
+" git checkout -b $br $(git rev-parse ...)\n"
+"\n"
+"với \"$br\" không hiểu lý do vì sao trống rỗng và một tham chiếu 40-hex được "
+"tạo ra.\n"
+"Xin hãy kiểm tra những tham chiếu này và có thể xóa chúng đi. Tắt lời nhắn "
+"này\n"
+"bằng cách chạy lệnh \"git config advice.object_name_warning false\""
+
+#: sha1_name.c:1097
msgid "HEAD does not point to a branch"
msgstr "HEAD không chỉ đến một nhánh nào cả"
-#: sha1_name.c:1039
+#: sha1_name.c:1100
#, c-format
msgid "No such branch: '%s'"
msgstr "Không có nhánh nào như thế: “%s”"
-#: sha1_name.c:1041
+#: sha1_name.c:1102
#, c-format
msgid "No upstream configured for branch '%s'"
msgstr "Không có thượng nguồn (upstream) được cấu hình cho nhánh “%s”"
-#: sha1_name.c:1044
+#: sha1_name.c:1106
#, c-format
msgid "Upstream branch '%s' not stored as a remote-tracking branch"
msgstr ""
msgid "unable to access '%s': %s"
msgstr "không thể truy cập “%s”: %s"
-#: wrapper.c:423
+#: wrapper.c:429
#, c-format
msgid "unable to access '%s'"
msgstr "không thể truy cập “%s”"
-#: wrapper.c:434
+#: wrapper.c:440
#, c-format
msgid "unable to look up current user in the passwd file: %s"
msgstr "không tìm thấy người dùng hiện tại trong tập tin passwd: %s"
-#: wrapper.c:435
+#: wrapper.c:441
msgid "no such user"
msgstr "không có người dùng như vậy"
-#: wt-status.c:140
+#: wt-status.c:141
msgid "Unmerged paths:"
msgstr "Những đường dẫn chưa được hòa trộn:"
-#: wt-status.c:167 wt-status.c:194
+#: wt-status.c:168 wt-status.c:195
#, c-format
msgid " (use \"git reset %s <file>...\" to unstage)"
msgstr " (dùng \"git reset %s <tập-tin>...\" để bỏ một stage (trạng thái))"
-#: wt-status.c:169 wt-status.c:196
+#: wt-status.c:170 wt-status.c:197
msgid " (use \"git rm --cached <file>...\" to unstage)"
msgstr " (dùng \"git rm --cached <tập-tin>...\" để bỏ trạng thái (stage))"
-#: wt-status.c:173
+#: wt-status.c:174
msgid " (use \"git add <file>...\" to mark resolution)"
msgstr " (dùng \"git add <tập-tin>...\" để đánh dấu là cần giải quyết)"
-#: wt-status.c:175 wt-status.c:179
+#: wt-status.c:176 wt-status.c:180
msgid " (use \"git add/rm <file>...\" as appropriate to mark resolution)"
msgstr ""
" (dùng \"git add/rm <tập-tin>...\" như là một cách thích hợp để đánh dấu "
"là cần được giải quyết)"
-#: wt-status.c:177
+#: wt-status.c:178
msgid " (use \"git rm <file>...\" to mark resolution)"
msgstr " (dùng \"git rm <tập-tin>...\" để đánh dấu là cần giải quyết)"
-#: wt-status.c:188
+#: wt-status.c:189
msgid "Changes to be committed:"
msgstr "Những thay đổi sẽ được chuyển giao:"
-#: wt-status.c:206
+#: wt-status.c:207
msgid "Changes not staged for commit:"
msgstr ""
"Các thay đổi không được đặt trạng thái (stage) cho lần chuyển giao (commit):"
-#: wt-status.c:210
+#: wt-status.c:211
msgid " (use \"git add <file>...\" to update what will be committed)"
msgstr ""
" (dùng \"git add <tập-tin>...\" để cập nhật những gì cần chuyển giao "
"(commit))"
-#: wt-status.c:212
+#: wt-status.c:213
msgid " (use \"git add/rm <file>...\" to update what will be committed)"
msgstr ""
" (dùng \"git add/rm <tập-tin>...\" để cập nhật những gì sẽ được chuyển giao)"
-#: wt-status.c:213
+#: wt-status.c:214
msgid ""
" (use \"git checkout -- <file>...\" to discard changes in working directory)"
msgstr ""
" (dùng \"git checkout -- <tập-tin>...\" để bỏ thay đổi trong thư mục làm "
"việc)"
-#: wt-status.c:215
+#: wt-status.c:216
msgid " (commit or discard the untracked or modified content in submodules)"
msgstr ""
" (chuyển giao (commit) hoặc là loại bỏ các nội dung không-bị-theo-vết hay "
"đã bị chỉnh sửa trong mô-đun-con)"
-#: wt-status.c:227
+#: wt-status.c:228
#, c-format
msgid " (use \"git %s <file>...\" to include in what will be committed)"
msgstr ""
" (dùng \"git %s <tập-tin>...\" để thêm vào những gì cần chuyển giao "
"(commit))"
-#: wt-status.c:244
+#: wt-status.c:245
msgid "bug"
msgstr "lỗi"
-#: wt-status.c:249
+#: wt-status.c:250
msgid "both deleted:"
msgstr "bị xóa bởi cả hai:"
-#: wt-status.c:250
+#: wt-status.c:251
msgid "added by us:"
msgstr "được thêm vào bởi chúng ta:"
-#: wt-status.c:251
+#: wt-status.c:252
msgid "deleted by them:"
msgstr "bị xóa đi bởi họ:"
-#: wt-status.c:252
+#: wt-status.c:253
msgid "added by them:"
msgstr "được thêm vào bởi họ:"
-#: wt-status.c:253
+#: wt-status.c:254
msgid "deleted by us:"
msgstr "bị xóa bởi chúng ta:"
-#: wt-status.c:254
+#: wt-status.c:255
msgid "both added:"
msgstr "được thêm vào bởi cả hai:"
-#: wt-status.c:255
+#: wt-status.c:256
msgid "both modified:"
msgstr "bị sửa bởi cả hai:"
-#: wt-status.c:285
+#: wt-status.c:286
msgid "new commits, "
msgstr "lần chuyển giao (commit) mới, "
-#: wt-status.c:287
+#: wt-status.c:288
msgid "modified content, "
msgstr "nội dung bị sửa đổi, "
-#: wt-status.c:289
+#: wt-status.c:290
msgid "untracked content, "
msgstr "nội dung chưa được theo dõi, "
-#: wt-status.c:306
+#: wt-status.c:307
#, c-format
msgid "new file: %s"
msgstr "tập tin mới: %s"
-#: wt-status.c:309
+#: wt-status.c:310
#, c-format
msgid "copied: %s -> %s"
msgstr "đã sao chép: %s -> %s"
-#: wt-status.c:312
+#: wt-status.c:313
#, c-format
msgid "deleted: %s"
msgstr "đã xóa: %s"
-#: wt-status.c:315
+#: wt-status.c:316
#, c-format
msgid "modified: %s"
msgstr "đã sửa đổi: %s"
-#: wt-status.c:318
+#: wt-status.c:319
#, c-format
msgid "renamed: %s -> %s"
msgstr "đã đổi tên: %s -> %s"
-#: wt-status.c:321
+#: wt-status.c:322
#, c-format
msgid "typechange: %s"
msgstr "đổi-kiểu: %s"
-#: wt-status.c:324
+#: wt-status.c:325
#, c-format
msgid "unknown: %s"
msgstr "không hiểu: %s"
-#: wt-status.c:327
+#: wt-status.c:328
#, c-format
msgid "unmerged: %s"
msgstr "chưa hòa trộn: %s"
-#: wt-status.c:330
+#: wt-status.c:331
#, c-format
msgid "bug: unhandled diff status %c"
msgstr "lỗi: không lấy được trạng thái lệnh diff %c"
msgid "You have unmerged paths."
msgstr "Bạn có những đường dẫn chưa được hòa trộn."
-#: wt-status.c:806 wt-status.c:958
+#: wt-status.c:806
msgid " (fix conflicts and run \"git commit\")"
msgstr " (sửa các xung đột sau đó chạy \"git commit\")"
msgstr "Miếng vá hiện tại bị trống rỗng."
#: wt-status.c:829
-msgid " (fix conflicts and then run \"git am --resolved\")"
-msgstr " (sửa các xung đột và sau đó chạy lệnh \"git am --resolved\")"
+msgid " (fix conflicts and then run \"git am --continue\")"
+msgstr " (sửa các xung đột và sau đó chạy lệnh \"git am --continue\")"
#: wt-status.c:831
msgid " (use \"git am --skip\" to skip this patch)"
msgid "You are currently cherry-picking."
msgstr "Bạn hiện nay đang thực hiện việc cherry-pick."
+#: wt-status.c:958
+msgid " (fix conflicts and run \"git cherry-pick --continue\")"
+msgstr ""
+" (sửa các xung đột và sau đó chạy lệnh \"git cherry-pick --continue\")"
+
#: wt-status.c:961
-msgid " (all conflicts fixed: run \"git commit\")"
-msgstr " (khi tất cả các xung đột đã sửa xong: chạy lệnh \"git commit\")"
+msgid " (all conflicts fixed: run \"git cherry-pick --continue\")"
+msgstr ""
+" (khi tất cả các xung đột đã sửa xong: chạy lệnh \"git cherry-pick --"
+"continue\")"
-#: wt-status.c:970
+#: wt-status.c:963
+msgid " (use \"git cherry-pick --abort\" to cancel the cherry-pick operation)"
+msgstr " (dùng \"git cherry-pick --abort\" để hủy bỏ thao tác cherry-pick)"
+
+#: wt-status.c:972
#, c-format
msgid "You are currently reverting commit %s."
msgstr "Bạn hiện nay đang thực hiện thao tác revert lần chuyển giao “%s”."
-#: wt-status.c:975
+#: wt-status.c:977
msgid " (fix conflicts and run \"git revert --continue\")"
msgstr " (sửa các xung đột và sau đó chạy lệnh \"git revert --continue\")"
-#: wt-status.c:978
+#: wt-status.c:980
msgid " (all conflicts fixed: run \"git revert --continue\")"
msgstr ""
" (khi tất cả các xung đột đã sửa xong: chạy lệnh \"git revert --continue\")"
-#: wt-status.c:980
+#: wt-status.c:982
msgid " (use \"git revert --abort\" to cancel the revert operation)"
msgstr " (dùng \"git revert --abort\" để hủy bỏ thao tác revert)"
-#: wt-status.c:991
+#: wt-status.c:993
#, c-format
msgid "You are currently bisecting, started from branch '%s'."
msgstr ""
"Bạn hiện nay đang thực hiện thao tác di chuyển nửa bước (bisect), bắt đầu từ "
"nhánh “%s”."
-#: wt-status.c:995
+#: wt-status.c:997
msgid "You are currently bisecting."
msgstr "Bạn hiện tại đang thực hiện việc bisect (chia đôi)."
-#: wt-status.c:998
+#: wt-status.c:1000
msgid " (use \"git bisect reset\" to get back to the original branch)"
msgstr " (dùng \"git bisect reset\" để quay trở lại nhánh nguyên thủy)"
msgid "On branch "
msgstr "Trên nhánh "
-#: wt-status.c:1184
+#: wt-status.c:1180
+msgid "rebase in progress; onto "
+msgstr "rebase đang được thực hiện: lên trên"
+
+#: wt-status.c:1187
msgid "HEAD detached at "
msgstr "HEAD được tách rời tại"
-#: wt-status.c:1186
+#: wt-status.c:1189
msgid "HEAD detached from "
msgstr "HEAD được tách rời từ"
-#: wt-status.c:1189
+#: wt-status.c:1192
msgid "Not currently on any branch."
msgstr "Hiện tại chẳng ở nhánh nào cả."
-#: wt-status.c:1206
+#: wt-status.c:1209
msgid "Initial commit"
msgstr "Lần chuyển giao (commit) khởi đầu"
-#: wt-status.c:1220
+#: wt-status.c:1223
msgid "Untracked files"
msgstr "Những tập tin chưa được theo dõi"
-#: wt-status.c:1222
+#: wt-status.c:1225
msgid "Ignored files"
msgstr "Những tập tin bị lờ đi"
-#: wt-status.c:1226
+#: wt-status.c:1229
#, c-format
msgid ""
"It took %.2f seconds to enumerate untracked files. 'status -uno'\n"
"có lẽ làm nó nhanh hơn, nhưng bạn phải cẩn thận đừng quên mình phải\n"
"tự thêm các tập tin mới (xem “git help status”.."
-#: wt-status.c:1232
+#: wt-status.c:1235
#, c-format
msgid "Untracked files not listed%s"
msgstr "Những tập tin không bị theo vết không được liệt kê ra %s"
-#: wt-status.c:1234
+#: wt-status.c:1237
msgid " (use -u option to show untracked files)"
msgstr " (dùng tùy chọn -u để hiển thị các tập tin chưa được theo dõi)"
-#: wt-status.c:1240
+#: wt-status.c:1243
msgid "No changes"
msgstr "Không có thay đổi nào"
-#: wt-status.c:1245
+#: wt-status.c:1248
#, c-format
msgid "no changes added to commit (use \"git add\" and/or \"git commit -a\")\n"
msgstr ""
"không có thay đổi nào được thêm vào commit (dùng \"git add\" và/hoặc \"git "
"commit -a\")\n"
-#: wt-status.c:1248
+#: wt-status.c:1251
#, c-format
msgid "no changes added to commit\n"
msgstr "không có thay đổi nào được thêm vào lần chuyển giao (commit)\n"
-#: wt-status.c:1251
+#: wt-status.c:1254
#, c-format
msgid ""
"nothing added to commit but untracked files present (use \"git add\" to "
"không có gì được thêm vào lần chuyển giao (commit) nhưng có những tập tin "
"không được theo dấu vết hiện diện (dùng \"git add\" để đưa vào theo dõi)\n"
-#: wt-status.c:1254
+#: wt-status.c:1257
#, c-format
msgid "nothing added to commit but untracked files present\n"
msgstr ""
"không có gì được thêm vào lần chuyển giao (commit) nhưng có những tập tin "
"không được theo dấu vết hiện diện\n"
-#: wt-status.c:1257
+#: wt-status.c:1260
#, c-format
msgid "nothing to commit (create/copy files and use \"git add\" to track)\n"
msgstr ""
" không có gì để commit (tạo/sao-chép các tập tin và dùng \"git add\" để theo "
"dõi dấu vết)\n"
-#: wt-status.c:1260 wt-status.c:1265
+#: wt-status.c:1263 wt-status.c:1268
#, c-format
msgid "nothing to commit\n"
msgstr "không có gì để chuyển giao (commit)\n"
-#: wt-status.c:1263
+#: wt-status.c:1266
#, c-format
msgid "nothing to commit (use -u to show untracked files)\n"
msgstr ""
"không có gì để chuyển giao (commit) (dùng -u để bỏ các tập tin cần theo dấu "
"vết)\n"
-#: wt-status.c:1267
+#: wt-status.c:1270
#, c-format
msgid "nothing to commit, working directory clean\n"
msgstr "không có gì để chuyển giao (commit), thư mục làm việc sạch sẽ\n"
-#: wt-status.c:1375
+#: wt-status.c:1378
msgid "HEAD (no branch)"
msgstr "HEAD (không nhánh)"
-#: wt-status.c:1381
+#: wt-status.c:1384
msgid "Initial commit on "
msgstr "Lần chuyển giao (commit) khởi tạo trên "
-#: wt-status.c:1396
+#: wt-status.c:1399
msgid "behind "
msgstr "đằng sau "
-#: wt-status.c:1399 wt-status.c:1402
+#: wt-status.c:1402 wt-status.c:1405
msgid "ahead "
msgstr "phía trước "
-#: wt-status.c:1404
+#: wt-status.c:1407
msgid ", behind "
msgstr ", đằng sau "
-#: compat/precompose_utf8.c:58 builtin/clone.c:352
+#: compat/precompose_utf8.c:58 builtin/clone.c:351
#, c-format
msgid "failed to unlink '%s'"
msgstr "bỏ liên kết (unlink) %s không thành công"
msgid "unexpected diff status %c"
msgstr "trạng thái lệnh diff không như mong đợi %c"
-#: builtin/add.c:149 builtin/commit.c:233
+#: builtin/add.c:149 builtin/commit.c:238
msgid "updating files failed"
msgstr "Cập nhật tập tin gặp lỗi"
msgstr ""
"Các thay đổi không được lưu trạng thái sau khi làm tươi mới lại bảng mục lục:"
-#: builtin/add.c:256 builtin/add.c:572 builtin/rm.c:275
+#: builtin/add.c:256 builtin/add.c:573 builtin/rm.c:337
#, c-format
msgid "pathspec '%s' did not match any files"
msgstr "pathspec “%s” không khớp với bất kỳ tập tin nào"
msgid "Could not read the index"
msgstr "Không thể đọc bảng mục lục"
-#: builtin/add.c:349
+#: builtin/add.c:350
#, c-format
msgid "Could not open '%s' for writing."
msgstr "Không thể mở “%s” để ghi."
-#: builtin/add.c:353
+#: builtin/add.c:354
msgid "Could not write patch"
msgstr "Không thể ghi ra miếng vá"
-#: builtin/add.c:358
+#: builtin/add.c:359
#, c-format
msgid "Could not stat '%s'"
msgstr "không thể lấy trạng thái về “%s”"
-#: builtin/add.c:360
+#: builtin/add.c:361
msgid "Empty patch. Aborted."
msgstr "Miếng vá trống rỗng. Đã bỏ qua."
-#: builtin/add.c:366
+#: builtin/add.c:367
#, c-format
msgid "Could not apply '%s'"
msgstr "Không thể apply (áp dụng miếng vá) “%s”"
-#: builtin/add.c:376
+#: builtin/add.c:377
msgid "The following paths are ignored by one of your .gitignore files:\n"
msgstr ""
"Các đường dẫn theo sau đây sẽ bị lờ đi bởi một trong các tập tin .gitignore "
"của bạn:\n"
-#: builtin/add.c:393 builtin/clean.c:161 builtin/fetch.c:78 builtin/mv.c:63
-#: builtin/prune-packed.c:76 builtin/push.c:425 builtin/remote.c:1253
-#: builtin/rm.c:206
+#: builtin/add.c:394 builtin/clean.c:851 builtin/fetch.c:78 builtin/mv.c:63
+#: builtin/prune-packed.c:73 builtin/push.c:451 builtin/remote.c:1253
+#: builtin/rm.c:268
msgid "dry run"
msgstr "chạy thử"
-#: builtin/add.c:394 builtin/apply.c:4409 builtin/check-ignore.c:19
-#: builtin/commit.c:1152 builtin/count-objects.c:95 builtin/fsck.c:613
-#: builtin/log.c:1518 builtin/mv.c:62 builtin/read-tree.c:112
+#: builtin/add.c:395 builtin/apply.c:4410 builtin/check-ignore.c:19
+#: builtin/commit.c:1201 builtin/count-objects.c:95 builtin/fsck.c:613
+#: builtin/log.c:1573 builtin/mv.c:62 builtin/read-tree.c:113
msgid "be verbose"
msgstr "chi tiết"
-#: builtin/add.c:396
+#: builtin/add.c:397
msgid "interactive picking"
msgstr "sửa bằng cách tương tác"
-#: builtin/add.c:397 builtin/checkout.c:1063 builtin/reset.c:258
+#: builtin/add.c:398 builtin/checkout.c:1073 builtin/reset.c:261
msgid "select hunks interactively"
msgstr "chọn “hunks” một cách tương tác"
-#: builtin/add.c:398
+#: builtin/add.c:399
msgid "edit current diff and apply"
msgstr "sửa diff hiện nay và áp dụng nó"
-#: builtin/add.c:399
+#: builtin/add.c:400
msgid "allow adding otherwise ignored files"
msgstr "cho phép thêm các tập tin bị bỏ qua khác"
-#: builtin/add.c:400
+#: builtin/add.c:401
msgid "update tracked files"
msgstr "cập nhật các tập tin được theo vết"
-#: builtin/add.c:401
+#: builtin/add.c:402
msgid "record only the fact that the path will be added later"
msgstr "chỉ ghi lại sự việc mà đường dẫn sẽ được thêm vào sau"
-#: builtin/add.c:402
+#: builtin/add.c:403
msgid "add changes from all tracked and untracked files"
msgstr ""
"thêm các thay đổi từ tất cả các tập tin có cũng như không được theo dõi dấu "
"vết"
#. takes no arguments
-#: builtin/add.c:405
+#: builtin/add.c:406
msgid "ignore paths removed in the working tree (same as --no-all)"
msgstr ""
"lờ đi các đường dẫn bị gỡ bỏ trong cây thư mục làm việc (giống với --no-all)"
-#: builtin/add.c:407
+#: builtin/add.c:408
msgid "don't add, only refresh the index"
msgstr "không thêm, chỉ làm tươi mới bảng mục lục"
-#: builtin/add.c:408
+#: builtin/add.c:409
msgid "just skip files which cannot be added because of errors"
msgstr "chie bỏ qua những tập tin mà nó không thể được thêm vào bởi vì gặp lỗi"
-#: builtin/add.c:409
+#: builtin/add.c:410
msgid "check if - even missing - files are ignored in dry run"
msgstr ""
"kiểm tra xem - thậm chí thiếu - tập tin bị bỏ qua trong quá trình chạy thử"
-#: builtin/add.c:431
+#: builtin/add.c:432
#, c-format
msgid "Use -f if you really want to add them.\n"
msgstr "Sử dụng tùy chọn -f nếu bạn thực sự muốn thêm chúng vào.\n"
-#: builtin/add.c:432
+#: builtin/add.c:433
msgid "no files added"
msgstr "chưa có tập tin nào được thêm vào"
-#: builtin/add.c:438
+#: builtin/add.c:439
msgid "adding files failed"
msgstr "thêm tập tin gặp lỗi"
-#: builtin/add.c:477
+#: builtin/add.c:478
msgid "-A and -u are mutually incompatible"
msgstr "-A và -u xung khắc nhau"
-#: builtin/add.c:495
+#: builtin/add.c:496
msgid "Option --ignore-missing can only be used together with --dry-run"
msgstr "Tùy chọn --ignore-missing chỉ có thể được dùng cùng với --dry-run"
-#: builtin/add.c:525
+#: builtin/add.c:526
#, c-format
msgid "Nothing specified, nothing added.\n"
msgstr "Không có gì được chỉ ra, không có gì được thêm vào.\n"
-#: builtin/add.c:526
+#: builtin/add.c:527
#, c-format
msgid "Maybe you wanted to say 'git add .'?\n"
msgstr "Có lẽ bạn muốn là “git add .” phải không?\n"
-#: builtin/add.c:532 builtin/check-ignore.c:66 builtin/clean.c:204
-#: builtin/commit.c:293 builtin/mv.c:82 builtin/rm.c:235
+#: builtin/add.c:533 builtin/check-ignore.c:161 builtin/clean.c:895
+#: builtin/commit.c:298 builtin/mv.c:82 builtin/rm.c:297
msgid "index file corrupt"
msgstr "tập tin ghi bảng mục lục bị hỏng"
-#: builtin/add.c:604 builtin/apply.c:4505 builtin/mv.c:229 builtin/rm.c:370
+#: builtin/add.c:605 builtin/apply.c:4506 builtin/mv.c:229 builtin/rm.c:432
msgid "Unable to write new index file"
msgstr "Không thể ghi tập tin lưu bảng mục lục mới"
msgid "cannot checkout %s"
msgstr "không thể \"checkout\" %s"
-#: builtin/apply.c:3140 builtin/apply.c:3149 builtin/apply.c:3193
+#: builtin/apply.c:3140 builtin/apply.c:3149 builtin/apply.c:3194
#, c-format
msgid "read of %s failed"
msgstr "đọc %s gặp lỗi"
-#: builtin/apply.c:3173 builtin/apply.c:3395
+#: builtin/apply.c:3174 builtin/apply.c:3396
#, c-format
msgid "path %s has been renamed/deleted"
msgstr "đường dẫn %s đã bị xóa/đổi tên"
-#: builtin/apply.c:3254 builtin/apply.c:3409
+#: builtin/apply.c:3255 builtin/apply.c:3410
#, c-format
msgid "%s: does not exist in index"
msgstr "%s: không tồn tại trong bảng mục lục"
-#: builtin/apply.c:3258 builtin/apply.c:3401 builtin/apply.c:3423
+#: builtin/apply.c:3259 builtin/apply.c:3402 builtin/apply.c:3424
#, c-format
msgid "%s: %s"
msgstr "%s: %s"
-#: builtin/apply.c:3263 builtin/apply.c:3417
+#: builtin/apply.c:3264 builtin/apply.c:3418
#, c-format
msgid "%s: does not match index"
msgstr "%s: không khớp trong mục lục"
-#: builtin/apply.c:3365
+#: builtin/apply.c:3366
msgid "removal patch leaves file contents"
msgstr "loại bỏ miếng vá để lại nội dung tập tin"
-#: builtin/apply.c:3434
+#: builtin/apply.c:3435
#, c-format
msgid "%s: wrong type"
msgstr "%s: sai kiểu"
-#: builtin/apply.c:3436
+#: builtin/apply.c:3437
#, c-format
msgid "%s has type %o, expected %o"
msgstr "%s có kiểu %o, mong chờ %o"
-#: builtin/apply.c:3537
+#: builtin/apply.c:3538
#, c-format
msgid "%s: already exists in index"
msgstr "%s: đã có từ trước trong bảng mục lục"
-#: builtin/apply.c:3540
+#: builtin/apply.c:3541
#, c-format
msgid "%s: already exists in working directory"
msgstr "%s: đã sẵn có trong thư mục đang làm việc"
-#: builtin/apply.c:3560
+#: builtin/apply.c:3561
#, c-format
msgid "new mode (%o) of %s does not match old mode (%o)"
msgstr "chế độ mới (%o) của %s không khớp với chế độ cũ (%o)"
-#: builtin/apply.c:3565
+#: builtin/apply.c:3566
#, c-format
msgid "new mode (%o) of %s does not match old mode (%o) of %s"
msgstr "chế độ mới (%o) của %s không khớp với chế độ cũ (%o) của %s"
-#: builtin/apply.c:3573
+#: builtin/apply.c:3574
#, c-format
msgid "%s: patch does not apply"
msgstr "%s: miếng vá không được áp dụng"
-#: builtin/apply.c:3586
+#: builtin/apply.c:3587
#, c-format
msgid "Checking patch %s..."
msgstr "Đang kiểm tra miếng vá %s..."
-#: builtin/apply.c:3679 builtin/checkout.c:216 builtin/reset.c:124
+#: builtin/apply.c:3680 builtin/checkout.c:216 builtin/reset.c:127
#, c-format
msgid "make_cache_entry failed for path '%s'"
msgstr "make_cache_entry gặp lỗi đối với đường dẫn “%s”"
-#: builtin/apply.c:3822
+#: builtin/apply.c:3823
#, c-format
msgid "unable to remove %s from index"
msgstr "không thể gỡ bỏ %s từ mục lục"
-#: builtin/apply.c:3850
+#: builtin/apply.c:3851
#, c-format
-msgid "corrupt patch for subproject %s"
-msgstr "miếng vá sai hỏng cho dự án con (subproject) %s"
+msgid "corrupt patch for submodule %s"
+msgstr "miếng vá sai hỏng cho mô-đun-con (subproject) %s"
-#: builtin/apply.c:3854
+#: builtin/apply.c:3855
#, c-format
msgid "unable to stat newly created file '%s'"
msgstr "không thể lấy trạng thái về tập tin %s mới hơn đã được tạo"
-#: builtin/apply.c:3859
+#: builtin/apply.c:3860
#, c-format
msgid "unable to create backing store for newly created file %s"
msgstr "không thể tạo “backing store” cho tập tin được tạo mới hơn %s"
-#: builtin/apply.c:3862 builtin/apply.c:3970
+#: builtin/apply.c:3863 builtin/apply.c:3971
#, c-format
msgid "unable to add cache entry for %s"
msgstr "không thể thêm mục nhớ tạm cho %s"
-#: builtin/apply.c:3895
+#: builtin/apply.c:3896
#, c-format
msgid "closing file '%s'"
msgstr "đang đóng tập tin “%s”"
-#: builtin/apply.c:3944
+#: builtin/apply.c:3945
#, c-format
msgid "unable to write file '%s' mode %o"
msgstr "không thể ghi vào tập tin “%s” chế độ (mode) %o"
-#: builtin/apply.c:4031
+#: builtin/apply.c:4032
#, c-format
msgid "Applied patch %s cleanly."
msgstr "Đã áp dụng miếng và %s một cách sạch sẽ."
-#: builtin/apply.c:4039
+#: builtin/apply.c:4040
msgid "internal error"
msgstr "lỗi nội bộ"
#. Say this even without --verbose
-#: builtin/apply.c:4042
+#: builtin/apply.c:4043
#, c-format
msgid "Applying patch %%s with %d reject..."
msgid_plural "Applying patch %%s with %d rejects..."
msgstr[0] "Đang áp dụng miếng vá %%s với %d lần từ chối..."
msgstr[1] "Đang áp dụng miếng vá %%s với %d lần từ chối..."
-#: builtin/apply.c:4052
+#: builtin/apply.c:4053
#, c-format
msgid "truncating .rej filename to %.*s.rej"
msgstr "đang cắt cụt tên tập tin .rej thành %.*s.rej"
-#: builtin/apply.c:4073
+#: builtin/apply.c:4074
#, c-format
msgid "Hunk #%d applied cleanly."
msgstr "Khối nhớ #%d được áp dụng gọn gàng."
-#: builtin/apply.c:4076
+#: builtin/apply.c:4077
#, c-format
msgid "Rejected hunk #%d."
msgstr "hunk #%d bị từ chối."
-#: builtin/apply.c:4226
+#: builtin/apply.c:4227
msgid "unrecognized input"
msgstr "không thừa nhận đầu vào"
-#: builtin/apply.c:4237
+#: builtin/apply.c:4238
msgid "unable to read index file"
msgstr "không thể đọc tập tin lưu bảng mục lục"
-#: builtin/apply.c:4356 builtin/apply.c:4359 builtin/clone.c:92
+#: builtin/apply.c:4357 builtin/apply.c:4360 builtin/clone.c:91
#: builtin/fetch.c:63
msgid "path"
msgstr "đường-dẫn"
-#: builtin/apply.c:4357
+#: builtin/apply.c:4358
msgid "don't apply changes matching the given path"
msgstr "không áp dụng các thay đổi khớp với đường dẫn đã cho"
-#: builtin/apply.c:4360
+#: builtin/apply.c:4361
msgid "apply changes matching the given path"
msgstr "áp dụng các thay đổi khớp với đường dẫn đã cho"
-#: builtin/apply.c:4362
+#: builtin/apply.c:4363
msgid "num"
msgstr "số"
-#: builtin/apply.c:4363
+#: builtin/apply.c:4364
msgid "remove <num> leading slashes from traditional diff paths"
msgstr "gỡ bỏ <số> phần dẫn đầu (slashe) từ đường dẫn diff cổ điển"
-#: builtin/apply.c:4366
+#: builtin/apply.c:4367
msgid "ignore additions made by the patch"
msgstr "lờ đi phần phụ thêm tạo ra bởi miếng vá"
-#: builtin/apply.c:4368
+#: builtin/apply.c:4369
msgid "instead of applying the patch, output diffstat for the input"
msgstr ""
"thay vì áp dụng một miếng vá, kết xuất kết quả từ lệnh diffstat cho đầu ra"
-#: builtin/apply.c:4372
+#: builtin/apply.c:4373
msgid "show number of added and deleted lines in decimal notation"
msgstr ""
"hiển thị số lượng các dòng được thêm vào và xóa đi theo ký hiệu thập phân"
-#: builtin/apply.c:4374
+#: builtin/apply.c:4375
msgid "instead of applying the patch, output a summary for the input"
msgstr "thay vì áp dụng một miếng vá, kết xuất kết quả cho đầu vào"
-#: builtin/apply.c:4376
+#: builtin/apply.c:4377
msgid "instead of applying the patch, see if the patch is applicable"
msgstr "thay vì áp dụng miếng vá, hãy xem xem miếng vá có thích hợp không"
-#: builtin/apply.c:4378
+#: builtin/apply.c:4379
msgid "make sure the patch is applicable to the current index"
msgstr "hãy chắc chắn là miếng vá thích hợp với bảng mục lục hiện hành"
-#: builtin/apply.c:4380
+#: builtin/apply.c:4381
msgid "apply a patch without touching the working tree"
msgstr "áp dụng một miếng vá mà không động chạm đến cây làm việc"
-#: builtin/apply.c:4382
+#: builtin/apply.c:4383
msgid "also apply the patch (use with --stat/--summary/--check)"
msgstr ""
"đồng thời áp dụng miếng vá (dùng với tùy chọn --stat/--summary/--check)"
-#: builtin/apply.c:4384
+#: builtin/apply.c:4385
msgid "attempt three-way merge if a patch does not apply"
msgstr "thử hòa trộn kiểu three-way nếu việc vá không thể thực hiện được"
-#: builtin/apply.c:4386
+#: builtin/apply.c:4387
msgid "build a temporary index based on embedded index information"
msgstr ""
"xây dựng bảng mục lục tạm thời trên cơ sở thông tin bảng mục lục được nhúng"
-#: builtin/apply.c:4388 builtin/checkout-index.c:197 builtin/ls-files.c:456
+#: builtin/apply.c:4389 builtin/checkout-index.c:197 builtin/ls-files.c:462
msgid "paths are separated with NUL character"
msgstr "các đường dẫn bị ngăn cách bởi ký tự NULL"
-#: builtin/apply.c:4391
+#: builtin/apply.c:4392
msgid "ensure at least <n> lines of context match"
msgstr "đảm bảo rằng có ít nhất <n> dòng nội dung khớp"
-#: builtin/apply.c:4392
+#: builtin/apply.c:4393
msgid "action"
msgstr "hành động"
-#: builtin/apply.c:4393
+#: builtin/apply.c:4394
msgid "detect new or modified lines that have whitespace errors"
msgstr "tìm thấy một dòng mới hoặc bị sửa đổi mà nó có lỗi do khoảng trắng"
-#: builtin/apply.c:4396 builtin/apply.c:4399
+#: builtin/apply.c:4397 builtin/apply.c:4400
msgid "ignore changes in whitespace when finding context"
msgstr "lờ đi sự thay đổi do khoảng trắng khi quét nội dung"
-#: builtin/apply.c:4402
+#: builtin/apply.c:4403
msgid "apply the patch in reverse"
msgstr "áp dụng miếng vá theo chiều ngược"
-#: builtin/apply.c:4404
+#: builtin/apply.c:4405
msgid "don't expect at least one line of context"
msgstr "đừng hy vọng có ít nhất một dòng nội dung"
-#: builtin/apply.c:4406
+#: builtin/apply.c:4407
msgid "leave the rejected hunks in corresponding *.rej files"
msgstr "để lại khối dữ liệu bị từ chối trong các tập tin *.rej tương ứng"
-#: builtin/apply.c:4408
+#: builtin/apply.c:4409
msgid "allow overlapping hunks"
msgstr "cho phép chồng khối nhớ"
-#: builtin/apply.c:4411
+#: builtin/apply.c:4412
msgid "tolerate incorrectly detected missing new-line at the end of file"
msgstr ""
"đã dò tìm thấy dung sai không chính xác thiếu dòng mới tại cuối tập tin"
-#: builtin/apply.c:4414
+#: builtin/apply.c:4415
msgid "do not trust the line counts in the hunk headers"
msgstr "không tin số lượng dòng trong phần đầu khối dữ liệu"
-#: builtin/apply.c:4416
+#: builtin/apply.c:4417
msgid "root"
msgstr "root"
-#: builtin/apply.c:4417
+#: builtin/apply.c:4418
msgid "prepend <root> to all filenames"
msgstr "treo thêm <root> vào tất cả các tên tập tin"
-#: builtin/apply.c:4439
+#: builtin/apply.c:4440
msgid "--3way outside a repository"
msgstr "--3way ở ngoài một kho chứa"
-#: builtin/apply.c:4447
+#: builtin/apply.c:4448
msgid "--index outside a repository"
msgstr "--index ở ngoài một kho chứa"
-#: builtin/apply.c:4450
+#: builtin/apply.c:4451
msgid "--cached outside a repository"
msgstr "--cached ở ngoài một kho chứa"
-#: builtin/apply.c:4466
+#: builtin/apply.c:4467
#, c-format
msgid "can't open patch '%s'"
msgstr "không thể mở miếng vá “%s”"
-#: builtin/apply.c:4480
+#: builtin/apply.c:4481
#, c-format
msgid "squelched %d whitespace error"
msgid_plural "squelched %d whitespace errors"
msgstr[0] "đã chấm dứt %d lỗi khoảng trắng"
msgstr[1] "đã chấm dứt %d lỗi khoảng trắng"
-#: builtin/apply.c:4486 builtin/apply.c:4496
+#: builtin/apply.c:4487 builtin/apply.c:4497
#, c-format
msgid "%d line adds whitespace errors."
msgid_plural "%d lines add whitespace errors."
"cập nhật BISECT_HEAD thay vì lấy ra (checking out) lần chuyển giao (commit) "
"hiện hành"
-#: builtin/blame.c:25
+#: builtin/blame.c:26
msgid "git blame [options] [rev-opts] [rev] [--] file"
msgstr "git blame [các-tùy-chọn] [rev-opts] [rev] [--] tập-tin"
-#: builtin/blame.c:30
+#: builtin/blame.c:31
msgid "[rev-opts] are documented in git-rev-list(1)"
msgstr "[rev-opts] được mô tả trong git-rev-list(1)"
-#: builtin/blame.c:2355
+#: builtin/blame.c:2276
msgid "Show blame entries as we find them, incrementally"
msgstr "Hiển thị các mục “blame” như là chúng ta thấy chúng, tăng dần"
-#: builtin/blame.c:2356
+#: builtin/blame.c:2277
msgid "Show blank SHA-1 for boundary commits (Default: off)"
msgstr ""
"Hiển thị SHA-1 trắng cho những lần chuyển giao biên giới (Mặc định: off)"
-#: builtin/blame.c:2357
+#: builtin/blame.c:2278
msgid "Do not treat root commits as boundaries (Default: off)"
msgstr "Không coi các lần chuyển giao gốc là giới hạn (Mặc định: off)"
-#: builtin/blame.c:2358
+#: builtin/blame.c:2279
msgid "Show work cost statistics"
msgstr "Hiển thị thống kê công sức làm việc"
-#: builtin/blame.c:2359
+#: builtin/blame.c:2280
msgid "Show output score for blame entries"
msgstr "Hiển thị kết xuất điểm số có các mục tin “blame”"
-#: builtin/blame.c:2360
+#: builtin/blame.c:2281
msgid "Show original filename (Default: auto)"
msgstr "Hiển thị tên tập tin gốc (Mặc định: auto)"
-#: builtin/blame.c:2361
+#: builtin/blame.c:2282
msgid "Show original linenumber (Default: off)"
msgstr "Hiển thị số dòng gốc (Mặc định: off)"
-#: builtin/blame.c:2362
+#: builtin/blame.c:2283
msgid "Show in a format designed for machine consumption"
msgstr "Hiển thị ở định dạng đã thiết kế cho sự tiêu dùng bằng máy"
-#: builtin/blame.c:2363
+#: builtin/blame.c:2284
msgid "Show porcelain format with per-line commit information"
msgstr "Hiển thị định dạng “porcelain” với thông tin chuyển giao mỗi dòng"
-#: builtin/blame.c:2364
+#: builtin/blame.c:2285
msgid "Use the same output mode as git-annotate (Default: off)"
msgstr "Dùng cùng chế độ xuất ra vóigit-annotate (Mặc định: off)"
-#: builtin/blame.c:2365
+#: builtin/blame.c:2286
msgid "Show raw timestamp (Default: off)"
msgstr "Hiển thị dấu vết thời gian dạng thô (Mặc định: off)"
-#: builtin/blame.c:2366
+#: builtin/blame.c:2287
msgid "Show long commit SHA1 (Default: off)"
msgstr "Hiển thị SHA1 của lần chuyển giao (commit) dạng dài (Mặc định: off)"
-#: builtin/blame.c:2367
+#: builtin/blame.c:2288
msgid "Suppress author name and timestamp (Default: off)"
msgstr "Không hiển thị tên tác giả và dấu vết thời gian (Mặc định: off)"
-#: builtin/blame.c:2368
+#: builtin/blame.c:2289
msgid "Show author email instead of name (Default: off)"
msgstr "Hiển thị thư điện tử của tác giả thay vì tên (Mặc định: off)"
-#: builtin/blame.c:2369
+#: builtin/blame.c:2290
msgid "Ignore whitespace differences"
msgstr "Bỏ qua các khác biệt do khoảng trắng gây ra"
-#: builtin/blame.c:2370
+#: builtin/blame.c:2291
msgid "Spend extra cycles to find better match"
msgstr "Tiêu thụ thêm năng tài nguyên máy móc để tìm kiếm tốt hơn nữa"
-#: builtin/blame.c:2371
+#: builtin/blame.c:2292
msgid "Use revisions from <file> instead of calling git-rev-list"
msgstr ""
"Sử dụng điểm xét duyệt (revision) từ <tập tin> thay vì gọi “git-rev-list”"
-#: builtin/blame.c:2372
+#: builtin/blame.c:2293
msgid "Use <file>'s contents as the final image"
msgstr "Sử dụng nội dung của <tập tin> như là ảnh cuối cùng"
-#: builtin/blame.c:2373 builtin/blame.c:2374
+#: builtin/blame.c:2294 builtin/blame.c:2295
msgid "score"
msgstr "điểm số"
-#: builtin/blame.c:2373
+#: builtin/blame.c:2294
msgid "Find line copies within and across files"
msgstr "Tìm các bản sao chép dòng trong và ngang qua tập tin"
-#: builtin/blame.c:2374
+#: builtin/blame.c:2295
msgid "Find line movements within and across files"
msgstr "Tìm các di chuyển dòng trong và ngang qua tập tin"
-#: builtin/blame.c:2375
+#: builtin/blame.c:2296
msgid "n,m"
msgstr "n,m"
-#: builtin/blame.c:2375
+#: builtin/blame.c:2296
msgid "Process only line range n,m, counting from 1"
msgstr "Xử lý chỉ dòng vùng n,m, tính từ 1"
msgstr "thao tác trên nhánh “remote-tracking”"
#: builtin/branch.c:805 builtin/branch.c:811 builtin/branch.c:832
-#: builtin/branch.c:838 builtin/commit.c:1368 builtin/commit.c:1369
-#: builtin/commit.c:1370 builtin/commit.c:1371 builtin/tag.c:468
+#: builtin/branch.c:838 builtin/commit.c:1414 builtin/commit.c:1415
+#: builtin/commit.c:1416 builtin/commit.c:1417 builtin/tag.c:468
msgid "commit"
msgstr "commit"
msgid "Failed to resolve HEAD as a valid ref."
msgstr "Gặp lỗi khi phân giải HEAD như là một tham chiếu (ref) hợp lệ."
-#: builtin/branch.c:860 builtin/clone.c:619
+#: builtin/branch.c:860 builtin/clone.c:630
msgid "HEAD not found below refs/heads!"
msgstr "không tìm thấy HEAD ở dưới refs/heads!"
msgid "Need a repository to unbundle."
msgstr "Cần một kho chứa để mà bung một bundle."
-#: builtin/cat-file.c:176
+#: builtin/cat-file.c:303
msgid "git cat-file (-t|-s|-e|-p|<type>|--textconv) <object>"
msgstr "git cat-file (-t|-s|-e|-p|<kiểu>|--textconv) <đối tượng>"
-#: builtin/cat-file.c:177
+#: builtin/cat-file.c:304
msgid "git cat-file (--batch|--batch-check) < <list_of_objects>"
msgstr "git cat-file (--batch|--batch-check) < <danh-sách-đối-tượng>"
-#: builtin/cat-file.c:195
+#: builtin/cat-file.c:341
msgid "<type> can be one of: blob, tree, commit, tag"
msgstr "<kiểu> là một trong số: blob, tree, commit, tag"
-#: builtin/cat-file.c:196
+#: builtin/cat-file.c:342
msgid "show object type"
msgstr "hiển thị kiểu đối tượng"
-#: builtin/cat-file.c:197
+#: builtin/cat-file.c:343
msgid "show object size"
msgstr "hiển thị kích thước đối tượng"
-#: builtin/cat-file.c:199
+#: builtin/cat-file.c:345
msgid "exit with zero when there's no error"
msgstr "thoát với 0 khi không có lỗi"
-#: builtin/cat-file.c:200
+#: builtin/cat-file.c:346
msgid "pretty-print object's content"
msgstr "in nội dung đối tượng dạng dễ đọc"
-#: builtin/cat-file.c:202
+#: builtin/cat-file.c:348
msgid "for blob objects, run textconv on object's content"
msgstr "với đối tượng blob, chạy lệnh textconv trên nội dung của đối tượng"
-#: builtin/cat-file.c:204
+#: builtin/cat-file.c:350
msgid "show info and content of objects fed from the standard input"
msgstr ""
"hiển thị thông tin và nội dung của các đối tượng lấy từ đầu vào tiêu chuẩn"
-#: builtin/cat-file.c:207
+#: builtin/cat-file.c:353
msgid "show info about objects fed from the standard input"
msgstr "hiển thị các thông tin về đối tượng fed từ đầu vào tiêu chuẩn"
msgid "input paths are terminated by a null character"
msgstr "các đường dẫn được ngăn cách bởi ký tự null"
-#: builtin/check-ignore.c:18 builtin/checkout.c:1044 builtin/gc.c:177
+#: builtin/check-ignore.c:18 builtin/checkout.c:1054 builtin/gc.c:177
msgid "suppress progress reporting"
msgstr "chặn các báo cáo tiến trình hoạt động"
-#: builtin/check-ignore.c:146
+#: builtin/check-ignore.c:26
+msgid "show non-matching input paths"
+msgstr "hiển thị những đường dẫn đầu vào không khớp với mẫu"
+
+#: builtin/check-ignore.c:143
msgid "cannot specify pathnames with --stdin"
msgstr "không thể chỉ định các tên đường dẫn với --stdin"
-#: builtin/check-ignore.c:149
+#: builtin/check-ignore.c:146
msgid "-z only makes sense with --stdin"
msgstr "-z chỉ hợp lý với --stdin"
-#: builtin/check-ignore.c:151
+#: builtin/check-ignore.c:148
msgid "no path specified"
msgstr "chưa ghi rõ đường dẫn"
-#: builtin/check-ignore.c:155
+#: builtin/check-ignore.c:152
msgid "--quiet is only valid with a single pathname"
msgstr "--quiet chỉ hợp lệ với tên đường dẫn đơn"
-#: builtin/check-ignore.c:157
+#: builtin/check-ignore.c:154
msgid "cannot have both --quiet and --verbose"
msgstr "không thể dùng cả hai tùy chọn --quiet và --verbose"
+#: builtin/check-ignore.c:157
+msgid "--non-matching is only valid with --verbose"
+msgstr "tùy-chọn --non-matching chỉ hợp lệ khi dùng với --verbose"
+
+#: builtin/check-mailmap.c:8
+msgid "git check-mailmap [options] <contact>..."
+msgstr "git check-mailmap [các-tùy-chọn] <danh-bạ>..."
+
+#: builtin/check-mailmap.c:13
+msgid "also read contacts from stdin"
+msgstr "đồng thời đọc các danh bạ từ đầu vào tiêu chuẩn"
+
+#: builtin/check-mailmap.c:24
+#, c-format
+msgid "unable to parse contact: %s"
+msgstr "không thể phân tích danh bạ: “%s”"
+
+#: builtin/check-mailmap.c:47
+msgid "no contacts specified"
+msgstr "chưa chỉ ra danh bạ"
+
#: builtin/checkout-index.c:126
msgid "git checkout-index [options] [--] [<file>...]"
msgstr "git checkout-index [các-tùy-chọn] [--] [<tập-tin>...]"
msgid "Can not do reflog for '%s'\n"
msgstr "Không thể thực hiện reflog cho “%s”\n"
-#: builtin/checkout.c:634
+#: builtin/checkout.c:639
msgid "HEAD is now at"
msgstr "HEAD hiện giờ tại"
-#: builtin/checkout.c:641
+#: builtin/checkout.c:646
#, c-format
msgid "Reset branch '%s'\n"
msgstr "Đặt lại nhánh “%s”\n"
-#: builtin/checkout.c:644
+#: builtin/checkout.c:649
#, c-format
msgid "Already on '%s'\n"
msgstr "Đã sẵn sàng trên “%s”\n"
-#: builtin/checkout.c:648
+#: builtin/checkout.c:653
#, c-format
msgid "Switched to and reset branch '%s'\n"
msgstr "Đã chuyển tới và reset nhánh “%s”\n"
-#: builtin/checkout.c:650 builtin/checkout.c:987
+#: builtin/checkout.c:655 builtin/checkout.c:997
#, c-format
msgid "Switched to a new branch '%s'\n"
msgstr "Đã chuyển đến nhánh mới “%s”\n"
-#: builtin/checkout.c:652
+#: builtin/checkout.c:657
#, c-format
msgid "Switched to branch '%s'\n"
msgstr "Đã chuyển đến nhánh “%s”\n"
-#: builtin/checkout.c:708
+#: builtin/checkout.c:713
#, c-format
msgid " ... and %d more.\n"
msgstr " ... và nhiều hơn %d.\n"
#. The singular version
-#: builtin/checkout.c:714
+#: builtin/checkout.c:719
#, c-format
msgid ""
"Warning: you are leaving %d commit behind, not connected to\n"
"\n"
"%s\n"
-#: builtin/checkout.c:732
+#: builtin/checkout.c:737
#, c-format
msgid ""
"If you want to keep them by creating a new branch, this may be a good time\n"
" git branch tên_nhánh_mới %s\n"
"\n"
-#: builtin/checkout.c:762
+#: builtin/checkout.c:767
msgid "internal error in revision walk"
-msgstr "lỗi nội bộ trong khi di chuyển qua các điểm xét lại"
+msgstr "lỗi nội bộ trong khi di chuyển qua các điểm xét duyệt"
-#: builtin/checkout.c:766
+#: builtin/checkout.c:771
msgid "Previous HEAD position was"
msgstr "Vị trí kế trước của HEAD là"
-#: builtin/checkout.c:793 builtin/checkout.c:982
+#: builtin/checkout.c:798 builtin/checkout.c:992
msgid "You are on a branch yet to be born"
msgstr "Bạn tại nhánh mà nó chưa hề được sinh ra"
#. case (1)
-#: builtin/checkout.c:918
+#: builtin/checkout.c:928
#, c-format
msgid "invalid reference: %s"
msgstr "tham chiếu sai: %s"
#. case (1): want a tree
-#: builtin/checkout.c:957
+#: builtin/checkout.c:967
#, c-format
msgid "reference is not a tree: %s"
msgstr "tham chiếu không phải là một cây (tree):%s"
-#: builtin/checkout.c:996
+#: builtin/checkout.c:1006
msgid "paths cannot be used with switching branches"
msgstr "các đường dẫn không thể dùng cùng với các nhánh chuyển"
-#: builtin/checkout.c:999 builtin/checkout.c:1003
+#: builtin/checkout.c:1009 builtin/checkout.c:1013
#, c-format
msgid "'%s' cannot be used with switching branches"
msgstr "“%s” không thể được sử dụng với các nhánh chuyển"
-#: builtin/checkout.c:1007 builtin/checkout.c:1010 builtin/checkout.c:1015
-#: builtin/checkout.c:1018
+#: builtin/checkout.c:1017 builtin/checkout.c:1020 builtin/checkout.c:1025
+#: builtin/checkout.c:1028
#, c-format
msgid "'%s' cannot be used with '%s'"
msgstr "“%s” không thể được sử dụng với “%s”"
-#: builtin/checkout.c:1023
+#: builtin/checkout.c:1033
#, c-format
msgid "Cannot switch branch to a non-commit '%s'"
msgstr "Không thể chuyển nhánh đến một non-commit “%s”"
-#: builtin/checkout.c:1045 builtin/checkout.c:1047 builtin/clone.c:90
+#: builtin/checkout.c:1055 builtin/checkout.c:1057 builtin/clone.c:89
#: builtin/remote.c:169 builtin/remote.c:171
msgid "branch"
msgstr "nhánh"
-#: builtin/checkout.c:1046
+#: builtin/checkout.c:1056
msgid "create and checkout a new branch"
msgstr "tạo và checkout một nhánh mới"
-#: builtin/checkout.c:1048
+#: builtin/checkout.c:1058
msgid "create/reset and checkout a branch"
msgstr "create/reset và checkout một nhánh"
-#: builtin/checkout.c:1049
+#: builtin/checkout.c:1059
msgid "create reflog for new branch"
msgstr "tạo reflog cho nhánh mới"
-#: builtin/checkout.c:1050
+#: builtin/checkout.c:1060
msgid "detach the HEAD at named commit"
msgstr "rời bỏ HEAD tại lần chuyển giao danh nghĩa"
-#: builtin/checkout.c:1051
+#: builtin/checkout.c:1061
msgid "set upstream info for new branch"
msgstr "đặt thông tin thượng nguồn (upstream) cho nhánh mới"
-#: builtin/checkout.c:1053
+#: builtin/checkout.c:1063
msgid "new branch"
msgstr "nhánh mới"
-#: builtin/checkout.c:1053
+#: builtin/checkout.c:1063
msgid "new unparented branch"
msgstr "nhánh mồ côi mới"
-#: builtin/checkout.c:1054
+#: builtin/checkout.c:1064
msgid "checkout our version for unmerged files"
msgstr ""
"lấy ra (checkout) phiên bản của chúng ta cho các tập tin chưa được hòa trộn"
-#: builtin/checkout.c:1056
+#: builtin/checkout.c:1066
msgid "checkout their version for unmerged files"
msgstr ""
"lấy ra (checkout) phiên bản của chúng họ cho các tập tin chưa được hòa trộn"
-#: builtin/checkout.c:1058
+#: builtin/checkout.c:1068
msgid "force checkout (throw away local modifications)"
msgstr "ép buộc lấy ra (checkout) (bỏ đi những thay đổi nội bộ)"
-#: builtin/checkout.c:1059
+#: builtin/checkout.c:1069
msgid "perform a 3-way merge with the new branch"
msgstr "thực hiện hòa trộn kiểu 3-way với nhánh mới"
-#: builtin/checkout.c:1060 builtin/merge.c:217
+#: builtin/checkout.c:1070 builtin/merge.c:232
msgid "update ignored files (default)"
msgstr "cập nhật các tập tin bị bỏ qua (mặc định)"
-#: builtin/checkout.c:1061 builtin/log.c:1158 parse-options.h:245
+#: builtin/checkout.c:1071 builtin/log.c:1208 parse-options.h:249
msgid "style"
msgstr "kiểu"
-#: builtin/checkout.c:1062
+#: builtin/checkout.c:1072
msgid "conflict style (merge or diff3)"
msgstr "xung đột kiểu (hòa trộn hay diff3)"
-#: builtin/checkout.c:1065
+#: builtin/checkout.c:1075
msgid "do not limit pathspecs to sparse entries only"
msgstr "không giới hạn pathspecs chỉ thành các mục thưa thớt"
-#: builtin/checkout.c:1067
+#: builtin/checkout.c:1077
msgid "second guess 'git checkout no-such-branch'"
msgstr "gợi ý thứ hai “git checkout không-nhánh-nào-như-vậy”"
-#: builtin/checkout.c:1091
+#: builtin/checkout.c:1101
msgid "-b, -B and --orphan are mutually exclusive"
msgstr "Tùy chọn -b|-B và --orphan loại từ lẫn nhau"
-#: builtin/checkout.c:1108
+#: builtin/checkout.c:1118
msgid "--track needs a branch name"
msgstr "--track cần tên một nhánh"
-#: builtin/checkout.c:1115
+#: builtin/checkout.c:1125
msgid "Missing branch name; try -b"
msgstr "Thiếu tên nhánh; hãy thử -b"
-#: builtin/checkout.c:1150
+#: builtin/checkout.c:1160
msgid "invalid path specification"
msgstr "đường dẫn đã cho không hợp lệ"
-#: builtin/checkout.c:1157
+#: builtin/checkout.c:1167
#, c-format
msgid ""
"Cannot update paths and switch to branch '%s' at the same time.\n"
"Bạn đã có ý định checkout “%s” cái mà không thể được phân giải như là lần "
"chuyển giao (commit)?"
-#: builtin/checkout.c:1162
+#: builtin/checkout.c:1172
#, c-format
msgid "git checkout: --detach does not take a path argument '%s'"
msgstr "git checkout: --detach không nhận một đối số đường dẫn “%s”"
-#: builtin/checkout.c:1166
+#: builtin/checkout.c:1176
msgid ""
"git checkout: --ours/--theirs, --force and --merge are incompatible when\n"
"checking out of the index."
"git checkout: --ours/--theirs, --force và --merge là xung khắc với nhau khi\n"
"checkout bảng mục lục (index)."
-#: builtin/clean.c:20
-msgid "git clean [-d] [-f] [-n] [-q] [-e <pattern>] [-x | -X] [--] <paths>..."
-msgstr "git clean [-d] [-f] [-n] [-q] [-e <mẫu>] [-x | -X] [--] <đường-dẫn>..."
+#: builtin/clean.c:25
+msgid ""
+"git clean [-d] [-f] [-i] [-n] [-q] [-e <pattern>] [-x | -X] [--] <paths>..."
+msgstr ""
+"git clean [-d] [-f] [-i] [-n] [-q] [-e <mẫu>] [-x | -X] [--] <đường-dẫn>..."
-#: builtin/clean.c:24
+#: builtin/clean.c:29
#, c-format
msgid "Removing %s\n"
msgstr "Đang gỡ bỏ %s\n"
-#: builtin/clean.c:25
+#: builtin/clean.c:30
#, c-format
msgid "Would remove %s\n"
msgstr "Có thể gỡ bỏ %s\n"
-#: builtin/clean.c:26
+#: builtin/clean.c:31
#, c-format
msgid "Skipping repository %s\n"
msgstr "Đang bỏ qua kho chứa %s\n"
-#: builtin/clean.c:27
+#: builtin/clean.c:32
#, c-format
msgid "Would skip repository %s\n"
msgstr "Nên bỏ qua kho chứa %s\n"
-#: builtin/clean.c:28
+#: builtin/clean.c:33
#, c-format
msgid "failed to remove %s"
msgstr "gặp lỗi khi gỡ bỏ %s"
-#: builtin/clean.c:160
+#: builtin/clean.c:293
+msgid ""
+"Prompt help:\n"
+"1 - select a numbered item\n"
+"foo - select item based on unique prefix\n"
+" - (empty) select nothing"
+msgstr ""
+"Trợ giúp về nhắc:\n"
+"1 - chọn một mục được đánh số\n"
+"foo - chọn mục trên cơ sở tiền tố duy nhất\n"
+" - (trống rỗng) không chọn gì cả"
+
+#: builtin/clean.c:297
+msgid ""
+"Prompt help:\n"
+"1 - select a single item\n"
+"3-5 - select a range of items\n"
+"2-3,6-9 - select multiple ranges\n"
+"foo - select item based on unique prefix\n"
+"-... - unselect specified items\n"
+"* - choose all items\n"
+" - (empty) finish selecting"
+msgstr ""
+"Trợ giúp về nhắc:\n"
+"1 - chọn một mục đơn\n"
+"3-5 - chọn một vùng\n"
+"2-3,6-9 - chọn nhiều vùng\n"
+"foo - chọn mục dựa trên tiền tố duy nhất\n"
+"-... - không chọn các mục đã chỉ ra\n"
+"* - chọn tất\n"
+" - (trống rỗng) kết thúc việc chọn"
+
+#: builtin/clean.c:491
+#, c-format
+msgid "Huh (%s)?"
+msgstr "Hả (%s)?"
+
+#: builtin/clean.c:634
+#, c-format
+msgid "Input ignore patterns>> "
+msgstr "Mẫu để lọc các tập tin cần lờ đi đầu vào>>"
+
+#: builtin/clean.c:671
+#, c-format
+msgid "WARNING: Cannot find items matched by: %s"
+msgstr "CẢNH BÁO: Không tìm thấy các mục được khớp bởi: %s"
+
+#: builtin/clean.c:692
+msgid "Select items to delete"
+msgstr "Chọn mục muốn xóa"
+
+#: builtin/clean.c:732
+#, c-format
+msgid "remove %s? "
+msgstr "gỡ bỏ “%s”?"
+
+#: builtin/clean.c:757
+msgid "Bye."
+msgstr "Tạm biệt."
+
+#: builtin/clean.c:765
+msgid ""
+"clean - start cleaning\n"
+"filter by pattern - exclude items from deletion\n"
+"select by numbers - select items to be deleted by numbers\n"
+"ask each - confirm each deletion (like \"rm -i\")\n"
+"quit - stop cleaning\n"
+"help - this screen\n"
+"? - help for prompt selection"
+msgstr ""
+"clean - bắt đầu dọn dẹp\n"
+"filter by pattern - loại trừ các mục khỏi việc xóa\n"
+"select by numbers - chọn các mục cần xóa bằng số\n"
+"ask each - xác nhận trước mỗi lần xóa (giống như \"rm -i\")\n"
+"quit - dừng việc dọn dẹp lại\n"
+"help - hiển thị chính trợ giúp này\n"
+"? - trợ giúp dành cho chọn bằng cách nhắc"
+
+#: builtin/clean.c:792
+msgid "*** Commands ***"
+msgstr "*** Lệnh ***"
+
+#: builtin/clean.c:793
+msgid "What now"
+msgstr "Giờ thì sao"
+
+#: builtin/clean.c:801
+msgid "Would remove the following item:"
+msgid_plural "Would remove the following items:"
+msgstr[0] "Có muốn gỡ bỏ mục sau đây không:"
+msgstr[1] "Có muốn gỡ bỏ các mục sau đây không:"
+
+#: builtin/clean.c:818
+msgid "No more files to clean, exiting."
+msgstr "Không còn tập-tin nào để dọn dẹp, đang thoát ra."
+
+#: builtin/clean.c:850
msgid "do not print names of files removed"
msgstr "không hiển thị tên của các tập tin đã gỡ bỏ"
-#: builtin/clean.c:162
+#: builtin/clean.c:852
msgid "force"
msgstr "ép buộc"
-#: builtin/clean.c:164
+#: builtin/clean.c:853
+msgid "interactive cleaning"
+msgstr "sửa bằng cách tương tác"
+
+#: builtin/clean.c:855
msgid "remove whole directories"
msgstr "gỡ bỏ toàn bộ thư mục"
-#: builtin/clean.c:165 builtin/describe.c:412 builtin/grep.c:717
-#: builtin/ls-files.c:487 builtin/name-rev.c:231 builtin/show-ref.c:182
+#: builtin/clean.c:856 builtin/describe.c:420 builtin/grep.c:716
+#: builtin/ls-files.c:493 builtin/name-rev.c:315 builtin/show-ref.c:186
msgid "pattern"
msgstr "mẫu"
-#: builtin/clean.c:166
+#: builtin/clean.c:857
msgid "add <pattern> to ignore rules"
msgstr "thêm <mẫu> vào trong qui tắc bỏ qua"
-#: builtin/clean.c:167
+#: builtin/clean.c:858
msgid "remove ignored files, too"
msgstr "đồng thời gỡ bỏ cả các tập tin bị bỏ qua"
-#: builtin/clean.c:169
+#: builtin/clean.c:860
msgid "remove only ignored files"
msgstr "chỉ gỡ bỏ những tập tin bị bỏ qua"
-#: builtin/clean.c:187
+#: builtin/clean.c:878
msgid "-x and -X cannot be used together"
msgstr "-x và -X không thể dùng cùng một lúc với nhau"
-#: builtin/clean.c:191
+#: builtin/clean.c:882
msgid ""
-"clean.requireForce set to true and neither -n nor -f given; refusing to clean"
+"clean.requireForce set to true and neither -i, -n nor -f given; refusing to "
+"clean"
msgstr ""
-"clean.requireForce được đặt thành true và không đưa ra tùy chọn -n mà cũng "
+"clean.requireForce được đặt thành true và không đưa ra tùy chọn -n mà cũng "
"không -f; từ chối lệnh dọn dẹp (clean)"
-#: builtin/clean.c:194
+#: builtin/clean.c:885
msgid ""
-"clean.requireForce defaults to true and neither -n nor -f given; refusing to "
-"clean"
+"clean.requireForce defaults to true and neither -i, -n nor -f given; "
+"refusing to clean"
msgstr ""
-"clean.requireForce mặc định được đặt thành true và không đưa ra tùy chọn -n "
-"mà cũng không -f; từ chối lệnh dọn dẹp (clean)"
+"clean.requireForce mặc định được đặt là true và không đưa ra tùy chọn -n mà "
+"cũng không -f; từ chối lệnh dọn dẹp (clean)"
-#: builtin/clone.c:37
+#: builtin/clone.c:36
msgid "git clone [options] [--] <repo> [<dir>]"
msgstr "git clone [các-tùy-chọn] [--] <kho> [<t.mục>]"
-#: builtin/clone.c:65 builtin/fetch.c:82 builtin/merge.c:214
-#: builtin/push.c:436
+#: builtin/clone.c:64 builtin/fetch.c:82 builtin/merge.c:229
+#: builtin/push.c:462
msgid "force progress reporting"
msgstr "ép buộc báo cáo tiến trình"
-#: builtin/clone.c:67
+#: builtin/clone.c:66
msgid "don't create a checkout"
msgstr "không tạo một checkout"
-#: builtin/clone.c:68 builtin/clone.c:70 builtin/init-db.c:488
+#: builtin/clone.c:67 builtin/clone.c:69 builtin/init-db.c:488
msgid "create a bare repository"
msgstr "tạo kho chứa bare"
-#: builtin/clone.c:73
+#: builtin/clone.c:72
msgid "create a mirror repository (implies bare)"
msgstr "tạo kho bản sao (mirror) (ngụ ý là bare)"
-#: builtin/clone.c:75
+#: builtin/clone.c:74
msgid "to clone from a local repository"
msgstr "để nhân bản từ kho nội bộ"
-#: builtin/clone.c:77
+#: builtin/clone.c:76
msgid "don't use local hardlinks, always copy"
msgstr "không sử dụng liên kết cứng nội bộ, luôn sao chép"
-#: builtin/clone.c:79
+#: builtin/clone.c:78
msgid "setup as shared repository"
msgstr "cài đặt đây là kho chia sẻ"
-#: builtin/clone.c:81 builtin/clone.c:83
+#: builtin/clone.c:80 builtin/clone.c:82
msgid "initialize submodules in the clone"
msgstr "khởi tạo mô-đun-con trong bản sao"
-#: builtin/clone.c:84 builtin/init-db.c:485
+#: builtin/clone.c:83 builtin/init-db.c:485
msgid "template-directory"
msgstr "thư-mục-tạm"
-#: builtin/clone.c:85 builtin/init-db.c:486
+#: builtin/clone.c:84 builtin/init-db.c:486
msgid "directory from which templates will be used"
msgstr "thư mục mà tại đó các mẫu sẽ được dùng"
-#: builtin/clone.c:87
+#: builtin/clone.c:86
msgid "reference repository"
msgstr "kho tham chiếu"
-#: builtin/clone.c:88 builtin/column.c:26 builtin/merge-file.c:44
+#: builtin/clone.c:87 builtin/column.c:26 builtin/merge-file.c:44
msgid "name"
msgstr "tên"
-#: builtin/clone.c:89
+#: builtin/clone.c:88
msgid "use <name> instead of 'origin' to track upstream"
msgstr "dùng <tên> thay vì “origin” để theo dõi thượng nguồn (uptream)"
-#: builtin/clone.c:91
+#: builtin/clone.c:90
msgid "checkout <branch> instead of the remote's HEAD"
msgstr "lấy ra nhánh (checkout <nhánh>) thay vì HEAD của máy chủ"
-#: builtin/clone.c:93
+#: builtin/clone.c:92
msgid "path to git-upload-pack on the remote"
msgstr "đường dẫn đến git-upload-pack trên máy chủ"
-#: builtin/clone.c:94 builtin/fetch.c:83 builtin/grep.c:662
+#: builtin/clone.c:93 builtin/fetch.c:83 builtin/grep.c:661
msgid "depth"
msgstr "độ sâu"
-#: builtin/clone.c:95
+#: builtin/clone.c:94
msgid "create a shallow clone of that depth"
msgstr "tạo bản sao không đầy đủ cho mức sâu đã cho"
-#: builtin/clone.c:97
+#: builtin/clone.c:96
msgid "clone only one branch, HEAD or --branch"
msgstr "nhân bản (clone) chỉ một nhánh, HEAD hoặc --branch"
-#: builtin/clone.c:98 builtin/init-db.c:494
+#: builtin/clone.c:97 builtin/init-db.c:494
msgid "gitdir"
msgstr "gitdir"
-#: builtin/clone.c:99 builtin/init-db.c:495
+#: builtin/clone.c:98 builtin/init-db.c:495
msgid "separate git dir from working tree"
msgstr "không dùng chung thư mục dành riêng cho git và thư mục làm việc"
-#: builtin/clone.c:100
+#: builtin/clone.c:99
msgid "key=value"
msgstr "khóa=giá trị"
-#: builtin/clone.c:101
+#: builtin/clone.c:100
msgid "set config inside the new repository"
msgstr "đặt cấu hình bên trong một kho chứa mới"
-#: builtin/clone.c:254
+#: builtin/clone.c:253
#, c-format
msgid "reference repository '%s' is not a local repository."
msgstr "kho tham chiếu “%s” không phải là một kho nội bộ."
-#: builtin/clone.c:317
+#: builtin/clone.c:316
#, c-format
msgid "failed to create directory '%s'"
msgstr "tạo thư mục \"%s\" gặp lỗi"
-#: builtin/clone.c:319 builtin/diff.c:77
+#: builtin/clone.c:318 builtin/diff.c:77
#, c-format
msgid "failed to stat '%s'"
msgstr "gặp lỗi stat (lấy trạng thái về) “%s”"
-#: builtin/clone.c:321
+#: builtin/clone.c:320
#, c-format
msgid "%s exists and is not a directory"
msgstr "%s tồn tại nhưng không phải là một thư mục"
-#: builtin/clone.c:335
+#: builtin/clone.c:334
#, c-format
msgid "failed to stat %s\n"
msgstr "lỗi stat (lấy trạng thái về) %s\n"
-#: builtin/clone.c:357
+#: builtin/clone.c:356
#, c-format
msgid "failed to create link '%s'"
msgstr "gặp lỗi khi tạo được liên kết mềm %s"
-#: builtin/clone.c:361
+#: builtin/clone.c:360
#, c-format
msgid "failed to copy file to '%s'"
msgstr "gặp lỗi khi chép tập tin tới “%s”"
-#: builtin/clone.c:384
+#: builtin/clone.c:383
#, c-format
msgid "done.\n"
msgstr "hoàn tất.\n"
-#: builtin/clone.c:397
+#: builtin/clone.c:396
msgid ""
"Clone succeeded, but checkout failed.\n"
"You can inspect what was checked out with 'git status'\n"
"Bạn kiểm tra kỹ xem cái gì được lấy ra bằng lệnh “git status”\n"
"và thử checkout với lệnh “git checkout -f HEAD”\n"
-#: builtin/clone.c:476
+#: builtin/clone.c:475
#, c-format
msgid "Could not find remote branch %s to clone."
msgstr "Không tìm thấy nhánh máy chủ %s để nhân bản (clone)."
-#: builtin/clone.c:550
+#: builtin/clone.c:555
+#, c-format
+msgid "Checking connectivity... "
+msgstr "Đang kiểm tra kết nối..."
+
+#: builtin/clone.c:558
msgid "remote did not send all necessary objects"
msgstr "máy chủ đã không gửi tất cả các đối tượng cần thiết"
-#: builtin/clone.c:610
+#: builtin/clone.c:560
+#, c-format
+msgid "done\n"
+msgstr "xong.\n"
+
+#: builtin/clone.c:621
msgid "remote HEAD refers to nonexistent ref, unable to checkout.\n"
msgstr "refers HEAD máy chủ chỉ đến ref không tồn tại, không thể checkout.\n"
-#: builtin/clone.c:641
+#: builtin/clone.c:652
msgid "unable to checkout working tree"
msgstr "không thể lấy ra (checkout) cây làm việc"
-#: builtin/clone.c:749
+#: builtin/clone.c:760
msgid "Too many arguments."
msgstr "Có quá nhiều đối số."
-#: builtin/clone.c:753
+#: builtin/clone.c:764
msgid "You must specify a repository to clone."
msgstr "Bạn phải chỉ định một kho để mà nhân bản (clone)."
-#: builtin/clone.c:764
+#: builtin/clone.c:775
#, c-format
msgid "--bare and --origin %s options are incompatible."
msgstr "tùy chọn --bare và --origin %s xung khắc nhau."
-#: builtin/clone.c:767
+#: builtin/clone.c:778
msgid "--bare and --separate-git-dir are incompatible."
msgstr "tùy chọn --bare và --separate-git-dir xung khắc nhau."
-#: builtin/clone.c:780
+#: builtin/clone.c:791
#, c-format
msgid "repository '%s' does not exist"
msgstr "kho chứa “%s” chưa tồn tại"
-#: builtin/clone.c:785
+#: builtin/clone.c:796
msgid "--depth is ignored in local clones; use file:// instead."
msgstr "--depth bị lờ đi khi nhân bản nội bộ; hãy sử dụng file:// để thay thế."
-#: builtin/clone.c:795
+#: builtin/clone.c:798
+msgid "--local is ignored"
+msgstr "--local bị lờ đi"
+
+#: builtin/clone.c:808
#, c-format
msgid "destination path '%s' already exists and is not an empty directory."
msgstr "đường dẫn đích “%s” đã có từ trước và không phải là một thư mục rỗng."
-#: builtin/clone.c:805
+#: builtin/clone.c:818
#, c-format
msgid "working tree '%s' already exists."
msgstr "cây làm việc “%s” đã sẵn tồn tại rồi."
-#: builtin/clone.c:818 builtin/clone.c:830
+#: builtin/clone.c:831 builtin/clone.c:843
#, c-format
msgid "could not create leading directories of '%s'"
msgstr "không thể tạo các thư mục dẫn đầu của “%s”"
-#: builtin/clone.c:821
+#: builtin/clone.c:834
#, c-format
msgid "could not create work tree dir '%s'."
msgstr "không thể tạo cây thư mục làm việc dir “%s”."
-#: builtin/clone.c:840
+#: builtin/clone.c:853
#, c-format
msgid "Cloning into bare repository '%s'...\n"
msgstr "Đang nhân bản thành kho chứa bare “%s”...\n"
-#: builtin/clone.c:842
+#: builtin/clone.c:855
#, c-format
msgid "Cloning into '%s'...\n"
msgstr "Đang nhân bản thành “%s”...\n"
-#: builtin/clone.c:877
+#: builtin/clone.c:890
#, c-format
msgid "Don't know how to clone %s"
msgstr "Không biết làm cách nào để nhân bản (clone) %s"
-#: builtin/clone.c:926
+#: builtin/clone.c:942
#, c-format
msgid "Remote branch %s not found in upstream %s"
msgstr "Nhánh máy chủ %s không tìm thấy trong thượng nguồn (upstream) %s"
-#: builtin/clone.c:933
+#: builtin/clone.c:949
msgid "You appear to have cloned an empty repository."
msgstr "Bạn hình như là đã nhân bản một kho trống rỗng."
msgid "--command must be the first argument"
msgstr "--command phải là đối số đầu tiên"
-#: builtin/commit.c:34
+#: builtin/commit.c:35
msgid "git commit [options] [--] <pathspec>..."
msgstr "git commit [các-tùy-chọn] [--] <pathspec>..."
-#: builtin/commit.c:39
+#: builtin/commit.c:40
msgid "git status [options] [--] <pathspec>..."
msgstr "git status [các-tùy-chọn] [--] <pathspec>..."
-#: builtin/commit.c:44
+#: builtin/commit.c:45
msgid ""
"Your name and email address were configured automatically based\n"
"on your username and hostname. Please check that they are accurate.\n"
"\n"
" git commit --amend --reset-author\n"
-#: builtin/commit.c:56
+#: builtin/commit.c:57
msgid ""
"You asked to amend the most recent commit, but doing so would make\n"
"it empty. You can repeat your command with --allow-empty, or you can\n"
"hoặc là bạn gỡ bỏ các lần chuyển giao một cách hoàn toàn bằng lệnh:\n"
"\"git reset HEAD^\".\n"
-#: builtin/commit.c:61
+#: builtin/commit.c:62
msgid ""
"The previous cherry-pick is now empty, possibly due to conflict resolution.\n"
"If you wish to commit it anyway, use:\n"
"\n"
"Nếu không, hãy thử dùng “git reset”\n"
-#: builtin/commit.c:260
+#: builtin/commit.c:265
msgid "failed to unpack HEAD tree object"
msgstr "gặp lỗi khi tháo dỡ HEAD đối tượng cây"
-#: builtin/commit.c:302
+#: builtin/commit.c:307
msgid "unable to create temporary index"
msgstr "không thể tạo bảng mục lục tạm thời"
-#: builtin/commit.c:308
+#: builtin/commit.c:313
msgid "interactive add failed"
msgstr "việc thêm tương tác gặp lỗi"
-#: builtin/commit.c:341 builtin/commit.c:362 builtin/commit.c:412
+#: builtin/commit.c:346 builtin/commit.c:367 builtin/commit.c:417
msgid "unable to write new_index file"
msgstr "không thể ghi tập tin lưu bảng mục lục mới (new_index)"
-#: builtin/commit.c:393
+#: builtin/commit.c:398
msgid "cannot do a partial commit during a merge."
msgstr ""
"không thể thực hiện việc chuyển giao (commit) cục bộ trong khi đang được hòa "
"trộn."
-#: builtin/commit.c:395
+#: builtin/commit.c:400
msgid "cannot do a partial commit during a cherry-pick."
msgstr ""
"không thể thực hiện việc chuyển giao (commit) bộ phận trong khi đang cherry-"
"pick."
-#: builtin/commit.c:405
+#: builtin/commit.c:410
msgid "cannot read the index"
msgstr "không đọc được bảng mục lục"
-#: builtin/commit.c:425
+#: builtin/commit.c:430
msgid "unable to write temporary index file"
msgstr "không thể ghi tập tin lưu bảng mục lục tạm thời"
-#: builtin/commit.c:513 builtin/commit.c:519
+#: builtin/commit.c:521 builtin/commit.c:527
#, c-format
msgid "invalid commit: %s"
msgstr "lần chuyển giao (commit) không hợp lệ: %s"
-#: builtin/commit.c:542
+#: builtin/commit.c:549
msgid "malformed --author parameter"
msgstr "đối số --author bị dị hình"
-#: builtin/commit.c:562
+#: builtin/commit.c:569
#, c-format
msgid "Malformed ident string: '%s'"
msgstr "Chuỗi thụt lề đầu dòng dị hình: “%s”"
-#: builtin/commit.c:600 builtin/commit.c:633 builtin/commit.c:956
+#: builtin/commit.c:607 builtin/commit.c:640 builtin/commit.c:963
#, c-format
msgid "could not lookup commit %s"
msgstr "không thể tìm kiếm commit (lần chuyển giao) %s"
-#: builtin/commit.c:612 builtin/shortlog.c:270
+#: builtin/commit.c:619 builtin/shortlog.c:271
#, c-format
msgid "(reading log message from standard input)\n"
msgstr "(đang đọc thông điệp nhật ký từ đầu vào tiêu chuẩn)\n"
-#: builtin/commit.c:614
+#: builtin/commit.c:621
msgid "could not read log from standard input"
msgstr "không thể đọc nhật ký từ đầu vào tiêu chuẩn"
-#: builtin/commit.c:618
+#: builtin/commit.c:625
#, c-format
msgid "could not read log file '%s'"
msgstr "không đọc được tệp nhật ký “%s”"
-#: builtin/commit.c:624
+#: builtin/commit.c:631
msgid "commit has empty message"
msgstr "lần chuyển giao (commit) có ghi chú trống rỗng"
-#: builtin/commit.c:640
+#: builtin/commit.c:647
msgid "could not read MERGE_MSG"
msgstr "không thể đọc MERGE_MSG"
-#: builtin/commit.c:644
+#: builtin/commit.c:651
msgid "could not read SQUASH_MSG"
msgstr "không thể đọc SQUASH_MSG"
-#: builtin/commit.c:648
+#: builtin/commit.c:655
#, c-format
msgid "could not read '%s'"
msgstr "Không thể đọc “%s”."
-#: builtin/commit.c:709
+#: builtin/commit.c:716
msgid "could not write commit template"
msgstr "không thể ghi mẫu commit"
-#: builtin/commit.c:720
+#: builtin/commit.c:727
#, c-format
msgid ""
"\n"
"\t%s\n"
"và thử lại.\n"
-#: builtin/commit.c:725
+#: builtin/commit.c:732
#, c-format
msgid ""
"\n"
"\t%s\n"
"và thử lại.\n"
-#: builtin/commit.c:737
+#: builtin/commit.c:744
#, c-format
msgid ""
"Please enter the commit message for your changes. Lines starting\n"
"bắt đầu bằng “%c” sẽ được bỏ qua, nếu phần chú thích rỗng sẽ hủy bỏ lần "
"chuyển giao (commit).\n"
-#: builtin/commit.c:742
+#: builtin/commit.c:749
#, c-format
msgid ""
"Please enter the commit message for your changes. Lines starting\n"
"bắt đầu bằng “%c” sẽ được bỏ qua; bạn có thể xóa chúng đi nếu muốn thế.\n"
"Phần chú thích này nếu trống rỗng sẽ hủy bỏ lần chuyển giao (commit).\n"
-#: builtin/commit.c:755
+#: builtin/commit.c:762
#, c-format
msgid "%sAuthor: %s"
msgstr "%sTác giả: %s"
-#: builtin/commit.c:762
+#: builtin/commit.c:769
#, c-format
msgid "%sCommitter: %s"
msgstr "%sNgười chuyển giao (commit): %s"
-#: builtin/commit.c:782
+#: builtin/commit.c:789
msgid "Cannot read index"
msgstr "không đọc được bảng mục lục"
-#: builtin/commit.c:819
+#: builtin/commit.c:826
msgid "Error building trees"
msgstr "Gặp lỗi khi xây dựng cây"
-#: builtin/commit.c:834 builtin/tag.c:359
+#: builtin/commit.c:841 builtin/tag.c:359
#, c-format
msgid "Please supply the message using either -m or -F option.\n"
msgstr "Xin hãy áp dụng thông điệp sử dụng hoặc là tùy chọn -m hoặc là -F.\n"
-#: builtin/commit.c:931
+#: builtin/commit.c:938
#, c-format
msgid "No existing author found with '%s'"
msgstr "Không tìm thấy tác giả có sẵn với “%s”"
-#: builtin/commit.c:946 builtin/commit.c:1140
+#: builtin/commit.c:953 builtin/commit.c:1189
#, c-format
msgid "Invalid untracked files mode '%s'"
msgstr "Chế độ cho các tập tin không bị theo vết không hợp lệ “%s”"
-#: builtin/commit.c:976
+#: builtin/commit.c:990
+msgid "--long and -z are incompatible"
+msgstr "hai tùy chọn -long và -z không tương thích với nhau"
+
+#: builtin/commit.c:1020
msgid "Using both --reset-author and --author does not make sense"
msgstr "Sử dụng cả hai tùy chọn --reset-author và --author không hợp lý"
-#: builtin/commit.c:987
+#: builtin/commit.c:1031
msgid "You have nothing to amend."
msgstr "Không có gì để amend (tu bổ) cả."
-#: builtin/commit.c:990
+#: builtin/commit.c:1034
msgid "You are in the middle of a merge -- cannot amend."
msgstr ""
"Bạn đang ở giữa của quá trình hòa trộn -- không thể thực hiện amend (tu bổ)."
-#: builtin/commit.c:992
+#: builtin/commit.c:1036
msgid "You are in the middle of a cherry-pick -- cannot amend."
msgstr ""
"Bạn đang ở giữa của quá trình cherry-pick -- không thể thực hiện amend (tu "
"bổ)."
-#: builtin/commit.c:995
+#: builtin/commit.c:1039
msgid "Options --squash and --fixup cannot be used together"
msgstr "Các tùy chọn --squash và --fixup không thể sử dụng cùng với nhau"
-#: builtin/commit.c:1005
+#: builtin/commit.c:1049
msgid "Only one of -c/-C/-F/--fixup can be used."
msgstr "Chỉ một tùy chọn trong số -c/-C/-F/--fixup được sử dụng"
-#: builtin/commit.c:1007
+#: builtin/commit.c:1051
msgid "Option -m cannot be combined with -c/-C/-F/--fixup."
msgstr "Tùy chọn -m không thể được tổ hợp cùng với -c/-C/-F/--fixup."
-#: builtin/commit.c:1015
+#: builtin/commit.c:1059
msgid "--reset-author can be used only with -C, -c or --amend."
msgstr ""
"--reset-author chỉ có thể được sử dụng với tùy chọn -C, -c hay --amend."
-#: builtin/commit.c:1032
+#: builtin/commit.c:1076
msgid "Only one of --include/--only/--all/--interactive/--patch can be used."
msgstr ""
"Chỉ một trong các tùy chọn --include/--only/--all/--interactive/--patch được "
"sử dụng."
-#: builtin/commit.c:1034
+#: builtin/commit.c:1078
msgid "No paths with --include/--only does not make sense."
msgstr "Không đường dẫn với các tùy chọn --include/--only không hợp lý."
-#: builtin/commit.c:1036
+#: builtin/commit.c:1080
msgid "Clever... amending the last one with dirty index."
msgstr "Giỏi... tu bổ cái cuối với bảng mục lục phi nghĩa."
-#: builtin/commit.c:1038
+#: builtin/commit.c:1082
msgid "Explicit paths specified without -i nor -o; assuming --only paths..."
msgstr ""
"Những đường dẫn rõ ràng được chỉ ra không có tùy chọn -i cũng không -o; đang "
"giả định --only những-đường-dẫn..."
-#: builtin/commit.c:1048 builtin/tag.c:575
+#: builtin/commit.c:1092 builtin/tag.c:575
#, c-format
msgid "Invalid cleanup mode %s"
msgstr "Chế độ dọn dẹp không hợp lệ %s"
-#: builtin/commit.c:1053
+#: builtin/commit.c:1097
msgid "Paths with -a does not make sense."
msgstr "Các đường dẫn với tùy chọn -a không hợp lý."
-#: builtin/commit.c:1059 builtin/commit.c:1194
-msgid "--long and -z are incompatible"
-msgstr "hai tùy chọn -long và -z không tương thích với nhau"
-
-#: builtin/commit.c:1154 builtin/commit.c:1390
+#: builtin/commit.c:1203 builtin/commit.c:1436
msgid "show status concisely"
msgstr "hiển thị trạng thái ở dạng súc tích"
-#: builtin/commit.c:1156 builtin/commit.c:1392
+#: builtin/commit.c:1205 builtin/commit.c:1438
msgid "show branch information"
msgstr "hiển thị thông tin nhánh"
-#: builtin/commit.c:1158 builtin/commit.c:1394 builtin/push.c:426
+#: builtin/commit.c:1207 builtin/commit.c:1440 builtin/push.c:452
msgid "machine-readable output"
msgstr "kết xuất dạng máy-có-thể-đọc"
-#: builtin/commit.c:1161 builtin/commit.c:1396
+#: builtin/commit.c:1210 builtin/commit.c:1442
msgid "show status in long format (default)"
msgstr "hiển thị trạng thái ở định dạng dài (mặc định)"
-#: builtin/commit.c:1164 builtin/commit.c:1399
+#: builtin/commit.c:1213 builtin/commit.c:1445
msgid "terminate entries with NUL"
msgstr "chấm dứt các mục bằng NUL"
-#: builtin/commit.c:1166 builtin/commit.c:1402 builtin/fast-export.c:659
-#: builtin/fast-export.c:662 builtin/tag.c:459
+#: builtin/commit.c:1215 builtin/commit.c:1448 builtin/fast-export.c:667
+#: builtin/fast-export.c:670 builtin/tag.c:459
msgid "mode"
msgstr "chế độ"
-#: builtin/commit.c:1167 builtin/commit.c:1402
+#: builtin/commit.c:1216 builtin/commit.c:1448
msgid "show untracked files, optional modes: all, normal, no. (Default: all)"
msgstr ""
"hiển thị các tập tin chưa được theo dõi dấu vết, các chế độ tùy chọn: all, "
"normal, no. (Mặc định: all)"
-#: builtin/commit.c:1170
+#: builtin/commit.c:1219
msgid "show ignored files"
msgstr "hiển thị các tập tin ẩn"
-#: builtin/commit.c:1171 parse-options.h:151
+#: builtin/commit.c:1220 parse-options.h:154
msgid "when"
msgstr "khi"
-#: builtin/commit.c:1172
+#: builtin/commit.c:1221
msgid ""
"ignore changes to submodules, optional when: all, dirty, untracked. "
"(Default: all)"
msgstr ""
-"bỏ qua các thay đổi trong mô-đun con, tùy chọn khi: all, dirty, untracked. "
+"bỏ qua các thay đổi trong mô-đun-con, tùy chọn khi: all, dirty, untracked. "
"(Mặc định: all)"
-#: builtin/commit.c:1174
+#: builtin/commit.c:1223
msgid "list untracked files in columns"
msgstr "hiển thị danh sách các tập-tin chưa được theo dõi trong các cột"
-#: builtin/commit.c:1248
+#: builtin/commit.c:1294
msgid "couldn't look up newly created commit"
msgstr "không thể tìm thấy lần chuyển giao (commit) mới hơn đã được tạo"
-#: builtin/commit.c:1250
+#: builtin/commit.c:1296
msgid "could not parse newly created commit"
msgstr ""
"không thể phân tích cú pháp của đối tượng chuyển giao mới hơn đã được tạo"
-#: builtin/commit.c:1291
+#: builtin/commit.c:1337
msgid "detached HEAD"
msgstr "đã rời khỏi HEAD"
-#: builtin/commit.c:1293
+#: builtin/commit.c:1339
msgid " (root-commit)"
msgstr " (root-commit)"
-#: builtin/commit.c:1360
+#: builtin/commit.c:1406
msgid "suppress summary after successful commit"
msgstr "không hiển thị tổng kết sau khi chuyển giao thành công"
-#: builtin/commit.c:1361
+#: builtin/commit.c:1407
msgid "show diff in commit message template"
msgstr "hiển thị sự khác biệt trong mẫu tin nhắn chuyển giao"
-#: builtin/commit.c:1363
+#: builtin/commit.c:1409
msgid "Commit message options"
msgstr "Các tùy chọn ghi chú commit"
-#: builtin/commit.c:1364 builtin/tag.c:457
+#: builtin/commit.c:1410 builtin/tag.c:457
msgid "read message from file"
msgstr "đọc chú thích từ tập tin"
-#: builtin/commit.c:1365
+#: builtin/commit.c:1411
msgid "author"
msgstr "tác giả"
-#: builtin/commit.c:1365
+#: builtin/commit.c:1411
msgid "override author for commit"
msgstr "ghi đè tác giả cho commit"
-#: builtin/commit.c:1366 builtin/gc.c:178
+#: builtin/commit.c:1412 builtin/gc.c:178
msgid "date"
msgstr "ngày tháng"
-#: builtin/commit.c:1366
+#: builtin/commit.c:1412
msgid "override date for commit"
msgstr "ghi đè ngày tháng cho commit"
-#: builtin/commit.c:1367 builtin/merge.c:208 builtin/notes.c:533
-#: builtin/notes.c:690 builtin/tag.c:455
+#: builtin/commit.c:1413 builtin/merge.c:223 builtin/notes.c:405
+#: builtin/notes.c:562 builtin/tag.c:455
msgid "message"
msgstr "thông điệp"
-#: builtin/commit.c:1367
+#: builtin/commit.c:1413
msgid "commit message"
msgstr "chú thích của lần commit"
-#: builtin/commit.c:1368
+#: builtin/commit.c:1414
msgid "reuse and edit message from specified commit"
msgstr ""
"dùng lại các ghi chú từ lần chuyển giao (commit) đã cho nhưng có cho sửa chữa"
-#: builtin/commit.c:1369
+#: builtin/commit.c:1415
msgid "reuse message from specified commit"
msgstr "dùng lại các ghi chú từ lần chuyển giao (commit) đã cho"
-#: builtin/commit.c:1370
+#: builtin/commit.c:1416
msgid "use autosquash formatted message to fixup specified commit"
msgstr ""
"dùng ghi chú có định dạng autosquash để sửa chữa lần chuyển giao đã chỉ ra"
-#: builtin/commit.c:1371
+#: builtin/commit.c:1417
msgid "use autosquash formatted message to squash specified commit"
msgstr ""
"dùng lời nhắn có định dạng tự động nén để nén lại các lần chuyển giao đã chỉ "
"ra"
-#: builtin/commit.c:1372
+#: builtin/commit.c:1418
msgid "the commit is authored by me now (used with -C/-c/--amend)"
msgstr ""
"lần chuyển giao nhận tôi là tác giả (được dùng với tùy chọn -C/-c/--amend)"
-#: builtin/commit.c:1373 builtin/log.c:1113 builtin/revert.c:109
+#: builtin/commit.c:1419 builtin/log.c:1160 builtin/revert.c:111
msgid "add Signed-off-by:"
msgstr "thêm dòng Signed-off-by:"
-#: builtin/commit.c:1374
+#: builtin/commit.c:1420
msgid "use specified template file"
msgstr "sử dụng tập tin mẫu đã cho"
-#: builtin/commit.c:1375
+#: builtin/commit.c:1421
msgid "force edit of commit"
msgstr "ép buộc sửa lần commit"
-#: builtin/commit.c:1376
+#: builtin/commit.c:1422
msgid "default"
msgstr "mặc định"
-#: builtin/commit.c:1376 builtin/tag.c:460
+#: builtin/commit.c:1422 builtin/tag.c:460
msgid "how to strip spaces and #comments from message"
msgstr "làm thế nào để cắt bỏ khoảng trắng và #ghichú từ mẩu tin nhắn"
-#: builtin/commit.c:1377
+#: builtin/commit.c:1423
msgid "include status in commit message template"
msgstr "bao gồm các trạng thái ghi mẫu ghi chú chuyển giao (commit)"
-#: builtin/commit.c:1378 builtin/merge.c:215 builtin/tag.c:461
+#: builtin/commit.c:1424 builtin/merge.c:230 builtin/tag.c:461
msgid "key id"
msgstr "id khóa"
-#: builtin/commit.c:1379 builtin/merge.c:216
+#: builtin/commit.c:1425 builtin/merge.c:231
msgid "GPG sign commit"
msgstr "ký lần commit dùng GPG"
#. end commit message options
-#: builtin/commit.c:1382
+#: builtin/commit.c:1428
msgid "Commit contents options"
msgstr "Các tùy nội dung ghi chú commit"
-#: builtin/commit.c:1383
+#: builtin/commit.c:1429
msgid "commit all changed files"
msgstr "chuyển giao tất cả các tập tin có thay đổi"
-#: builtin/commit.c:1384
+#: builtin/commit.c:1430
msgid "add specified files to index for commit"
msgstr "thêm các tập tin đã chỉ ra vào bảng mục lục để chuyển giao (commit)"
-#: builtin/commit.c:1385
+#: builtin/commit.c:1431
msgid "interactively add files"
msgstr "thêm các tập-tin bằng tương tác"
-#: builtin/commit.c:1386
+#: builtin/commit.c:1432
msgid "interactively add changes"
msgstr "thêm các thay đổi bằng tương tác"
-#: builtin/commit.c:1387
+#: builtin/commit.c:1433
msgid "commit only specified files"
msgstr "chỉ chuyển giao các tập tin đã chỉ ra"
-#: builtin/commit.c:1388
+#: builtin/commit.c:1434
msgid "bypass pre-commit hook"
msgstr "vòng qua móc (hook) pre-commit"
-#: builtin/commit.c:1389
+#: builtin/commit.c:1435
msgid "show what would be committed"
msgstr "hiển thị xem cái gì có thể được chuyển giao"
-#: builtin/commit.c:1400
+#: builtin/commit.c:1446
msgid "amend previous commit"
msgstr "tu bổ (amend) lần commit trước"
-#: builtin/commit.c:1401
+#: builtin/commit.c:1447
msgid "bypass post-rewrite hook"
msgstr "vòng qua móc (hook) post-rewrite"
-#: builtin/commit.c:1406
+#: builtin/commit.c:1452
msgid "ok to record an empty change"
msgstr "ok để ghi lại một thay đổi trống rỗng"
-#: builtin/commit.c:1409
+#: builtin/commit.c:1455
msgid "ok to record a change with an empty message"
msgstr "ok để ghi các thay đổi với lời nhắn trống rỗng"
-#: builtin/commit.c:1441
+#: builtin/commit.c:1488
msgid "could not parse HEAD commit"
msgstr "không thể phân tích commit (lần chuyển giao) HEAD"
-#: builtin/commit.c:1479 builtin/merge.c:510
+#: builtin/commit.c:1526 builtin/merge.c:525
#, c-format
msgid "could not open '%s' for reading"
msgstr "không thể mở “%s” để đọc"
-#: builtin/commit.c:1486
+#: builtin/commit.c:1533
#, c-format
msgid "Corrupt MERGE_HEAD file (%s)"
msgstr "Tập tin MERGE_HEAD sai hỏng (%s)"
-#: builtin/commit.c:1493
+#: builtin/commit.c:1540
msgid "could not read MERGE_MODE"
msgstr "không thể đọc MERGE_MODE"
-#: builtin/commit.c:1512
+#: builtin/commit.c:1559
#, c-format
msgid "could not read commit message: %s"
msgstr "không thể đọc thông điệp (message) commit (lần chuyển giao): %s"
-#: builtin/commit.c:1526
+#: builtin/commit.c:1573
#, c-format
msgid "Aborting commit; you did not edit the message.\n"
msgstr ""
"Đang bỏ qua việc chuyển giao (commit); bạn đã không biên soạn thông điệp "
"(message).\n"
-#: builtin/commit.c:1531
+#: builtin/commit.c:1578
#, c-format
msgid "Aborting commit due to empty commit message.\n"
msgstr ""
"Đang bỏ qua lần chuyển giao (commit) bởi vì thông điệp của nó trống rỗng.\n"
-#: builtin/commit.c:1546 builtin/merge.c:847 builtin/merge.c:872
+#: builtin/commit.c:1593 builtin/merge.c:861 builtin/merge.c:886
msgid "failed to write commit object"
msgstr "gặp lỗi khi ghi đối tượng chuyển giao (commit)"
-#: builtin/commit.c:1567
+#: builtin/commit.c:1614
msgid "cannot lock HEAD ref"
msgstr "không thể khóa HEAD ref (tham chiếu)"
-#: builtin/commit.c:1571
+#: builtin/commit.c:1618
msgid "cannot update HEAD ref"
msgstr "không thể cập nhật ref (tham chiếu) HEAD"
-#: builtin/commit.c:1582
+#: builtin/commit.c:1629
msgid ""
"Repository has been updated, but unable to write\n"
"new_index file. Check that disk is not full or quota is\n"
msgid "git config [options]"
msgstr "git config [các-tùy-chọn]"
-#: builtin/config.c:51
+#: builtin/config.c:52
msgid "Config file location"
msgstr "Vị trí tập tin cấu hình"
-#: builtin/config.c:52
+#: builtin/config.c:53
msgid "use global config file"
msgstr "đặt tập tin cấu hình cần toàn cục"
-#: builtin/config.c:53
+#: builtin/config.c:54
msgid "use system config file"
msgstr "sử dụng tập tin cấu hình hệ thống"
-#: builtin/config.c:54
+#: builtin/config.c:55
msgid "use repository config file"
msgstr "dùng tập tin cấu hình của kho"
-#: builtin/config.c:55
+#: builtin/config.c:56
msgid "use given config file"
msgstr "sử dụng tập tin cấu hình đã cho"
-#: builtin/config.c:56
+#: builtin/config.c:57
+msgid "blob-id"
+msgstr "blob-id"
+
+#: builtin/config.c:57
+msgid "read config from given blob object"
+msgstr "đọc cấu hình từ đối tượng blob đã cho"
+
+#: builtin/config.c:58
msgid "Action"
msgstr "Hành động"
-#: builtin/config.c:57
+#: builtin/config.c:59
msgid "get value: name [value-regex]"
msgstr "lấy giá-trị: tên [value-regex]"
-#: builtin/config.c:58
+#: builtin/config.c:60
msgid "get all values: key [value-regex]"
msgstr "lấy tất cả giá-trị: khóa [value-regex]"
-#: builtin/config.c:59
+#: builtin/config.c:61
msgid "get values for regexp: name-regex [value-regex]"
msgstr "lấy giá trị cho regexp: name-regex [value-regex]"
-#: builtin/config.c:60
+#: builtin/config.c:62
msgid "replace all matching variables: name value [value_regex]"
msgstr "thay thế tất cả các biến khớp mẫu: tên giá-trị [value_regex]"
-#: builtin/config.c:61
+#: builtin/config.c:63
msgid "add a new variable: name value"
msgstr "thêm biến mới: tên giá-trị"
-#: builtin/config.c:62
+#: builtin/config.c:64
msgid "remove a variable: name [value-regex]"
msgstr "gỡ bỏ biến: tên [value-regex]"
-#: builtin/config.c:63
+#: builtin/config.c:65
msgid "remove all matches: name [value-regex]"
msgstr "gỡ bỏ mọi cái khớp: tên [value-regex]"
-#: builtin/config.c:64
+#: builtin/config.c:66
msgid "rename section: old-name new-name"
msgstr "đổi tên chương: tên-cũ tên-mới"
-#: builtin/config.c:65
+#: builtin/config.c:67
msgid "remove a section: name"
msgstr "gỡ bỏ chương: tên"
-#: builtin/config.c:66
+#: builtin/config.c:68
msgid "list all"
msgstr "liệt kê tất"
-#: builtin/config.c:67
+#: builtin/config.c:69
msgid "open an editor"
msgstr "mở một trình biên soạn"
-#: builtin/config.c:68 builtin/config.c:69
+#: builtin/config.c:70 builtin/config.c:71
msgid "slot"
msgstr "khe"
-#: builtin/config.c:68
+#: builtin/config.c:70
msgid "find the color configured: [default]"
msgstr "tìm cấu hình màu sắc: [mặc định]"
-#: builtin/config.c:69
+#: builtin/config.c:71
msgid "find the color setting: [stdout-is-tty]"
msgstr "tìm các cài đặt về màu sắc: [stdout-là-tty]"
-#: builtin/config.c:70
+#: builtin/config.c:72
msgid "Type"
msgstr "Kiểu"
-#: builtin/config.c:71
+#: builtin/config.c:73
msgid "value is \"true\" or \"false\""
msgstr "giá trị là \"true\" hoặc \"false\""
-#: builtin/config.c:72
+#: builtin/config.c:74
msgid "value is decimal number"
msgstr "giá trị ở dạng số thập phân"
-#: builtin/config.c:73
+#: builtin/config.c:75
msgid "value is --bool or --int"
msgstr "giá trị là --bool hoặc --int"
-#: builtin/config.c:74
+#: builtin/config.c:76
msgid "value is a path (file or directory name)"
msgstr "giá trị là đường dẫn (tên tập tin hay thư mục)"
-#: builtin/config.c:75
+#: builtin/config.c:77
msgid "Other"
msgstr "Khác"
-#: builtin/config.c:76
+#: builtin/config.c:78
msgid "terminate values with NUL byte"
msgstr "chấm dứt giá trị với byte NUL"
-#: builtin/config.c:77
+#: builtin/config.c:79
msgid "respect include directives on lookup"
msgstr "tôn trọng kể cà các hướng trong tìm kiếm"
msgid "print sizes in human readable format"
msgstr "hiển thị kích cỡ theo định dạng dành cho người đọc"
-#: builtin/describe.c:15
+#: builtin/describe.c:16
msgid "git describe [options] <committish>*"
msgstr "git describe [các-tùy-chọn] <committish>*"
-#: builtin/describe.c:16
+#: builtin/describe.c:17
msgid "git describe [options] --dirty"
msgstr "git describe [các-tùy-chọn] --dirty"
-#: builtin/describe.c:233
+#: builtin/describe.c:237
#, c-format
msgid "annotated tag %s not available"
msgstr "thẻ đã được ghi chú %s không sẵn để dùng"
-#: builtin/describe.c:237
+#: builtin/describe.c:241
#, c-format
msgid "annotated tag %s has no embedded name"
msgstr "thẻ được chú giải %s không có tên nhúng"
-#: builtin/describe.c:239
+#: builtin/describe.c:243
#, c-format
msgid "tag '%s' is really '%s' here"
msgstr "thẻ “%s” đã thực sự ở đây “%s” rồi"
-#: builtin/describe.c:266
+#: builtin/describe.c:270
#, c-format
msgid "Not a valid object name %s"
msgstr "Không phải tên đối tượng %s hợp lệ"
-#: builtin/describe.c:269
+#: builtin/describe.c:273
#, c-format
msgid "%s is not a valid '%s' object"
msgstr "%s không phải là một đối tượng “%s” hợp lệ"
-#: builtin/describe.c:286
+#: builtin/describe.c:290
#, c-format
msgid "no tag exactly matches '%s'"
msgstr "không có thẻ nào khớp chính xác với “%s”"
-#: builtin/describe.c:288
+#: builtin/describe.c:292
#, c-format
msgid "searching to describe %s\n"
msgstr "Đang tìm kiếm để mô tả %s\n"
-#: builtin/describe.c:328
+#: builtin/describe.c:332
#, c-format
msgid "finished search at %s\n"
msgstr "việc tìm kiếm đã kết thúc tại %s\n"
-#: builtin/describe.c:352
+#: builtin/describe.c:359
#, c-format
msgid ""
"No annotated tags can describe '%s'.\n"
"Không có thẻ được chú giải nào được mô tả là “%s”.\n"
"Tuy nhiên, ở đây có những thẻ không được chú giải: hãy thử --tags."
-#: builtin/describe.c:356
+#: builtin/describe.c:363
#, c-format
msgid ""
"No tags can describe '%s'.\n"
"Không có thẻ (tag) có thể mô tả “%s”.\n"
"Hãy thử --always, hoặt tạo một số thẻ."
-#: builtin/describe.c:377
+#: builtin/describe.c:384
#, c-format
msgid "traversed %lu commits\n"
msgstr "đã xuyên %lu qua lần chuyển giao (commit)\n"
-#: builtin/describe.c:380
+#: builtin/describe.c:387
#, c-format
msgid ""
"more than %i tags found; listed %i most recent\n"
"tìm thấy nhiều hơn %i thẻ (tag); đã liệt kê %i gần đây nhất\n"
"bỏ đi tìm kiếm tại %s\n"
-#: builtin/describe.c:402
+#: builtin/describe.c:409
msgid "find the tag that comes after the commit"
msgstr "tìm các thẻ mà nó đến trước lần chuyển giao"
-#: builtin/describe.c:403
+#: builtin/describe.c:410
msgid "debug search strategy on stderr"
msgstr "chiến lược tìm kiếm trên đầu ra lỗi chuẩn stderr"
-#: builtin/describe.c:404
+#: builtin/describe.c:411
msgid "use any ref"
msgstr "dùng ref bất kỳ"
-#: builtin/describe.c:405
+#: builtin/describe.c:412
msgid "use any tag, even unannotated"
msgstr "dùng thẻ bất kỳ, cả khi “unannotated”"
-#: builtin/describe.c:406
+#: builtin/describe.c:413
msgid "always use long format"
msgstr "luôn dùng định dạng dài"
-#: builtin/describe.c:409
+#: builtin/describe.c:414
+msgid "only follow first parent"
+msgstr "chỉ theo cha mẹ đầu tiên"
+
+#: builtin/describe.c:417
msgid "only output exact matches"
msgstr "chỉ xuất những gì khớp chính xác"
-#: builtin/describe.c:411
+#: builtin/describe.c:419
msgid "consider <n> most recent tags (default: 10)"
msgstr "coi như <n> thẻ gần đây nhất (mặc định: 10)"
-#: builtin/describe.c:413
+#: builtin/describe.c:421
msgid "only consider tags matching <pattern>"
msgstr "chỉ cân nhắc đến những thẻ khớp với <mẫu>"
-#: builtin/describe.c:415 builtin/name-rev.c:238
+#: builtin/describe.c:423 builtin/name-rev.c:322
msgid "show abbreviated commit object as fallback"
msgstr "hiển thị đối tượng chuyển giao vắn tắt như là fallback"
-#: builtin/describe.c:416
+#: builtin/describe.c:424
msgid "mark"
msgstr "dấu"
-#: builtin/describe.c:417
+#: builtin/describe.c:425
msgid "append <mark> on dirty working tree (default: \"-dirty\")"
msgstr "thêm <dấu> trên cây thư mục làm việc bẩn (mặc định \"-dirty\")"
-#: builtin/describe.c:435
+#: builtin/describe.c:443
msgid "--long is incompatible with --abbrev=0"
msgstr "--long là xung khắc với tùy chọn --abbrev=0"
-#: builtin/describe.c:461
+#: builtin/describe.c:469
msgid "No names found, cannot describe anything."
msgstr "Không tìm thấy các tên, không thể mô tả gì cả."
-#: builtin/describe.c:481
+#: builtin/describe.c:489
msgid "--dirty is incompatible with committishes"
msgstr "--dirty là xung khắc với các tùy chọn dành cho chuyển giao (commit)"
msgid "'%s': not a regular file or symlink"
msgstr "“%s”: không phải tập tin bình thường hay liên kết tượng trưng"
-#: builtin/diff.c:228
+#: builtin/diff.c:230
#, c-format
msgid "invalid option: %s"
msgstr "tùy chọn sai: %s"
-#: builtin/diff.c:305
+#: builtin/diff.c:307
msgid "Not a git repository"
msgstr "Không phải là kho git"
-#: builtin/diff.c:348
+#: builtin/diff.c:350
#, c-format
msgid "invalid object '%s' given."
msgstr "đối tượng đã cho “%s” không hợp lệ."
-#: builtin/diff.c:353
-#, c-format
-msgid "more than %d trees given: '%s'"
-msgstr "đã chỉ ra nhiều hơn %d cây (tree): “%s”"
-
-#: builtin/diff.c:363
+#: builtin/diff.c:359
#, c-format
msgid "more than two blobs given: '%s'"
msgstr "đã cho nhiều hơn hai đối tượng blob: “%s”"
-#: builtin/diff.c:371
+#: builtin/diff.c:366
#, c-format
msgid "unhandled object '%s' given."
msgstr "đã cho đối tượng không thể nắm giữ “%s”."
msgid "git fast-export [rev-list-opts]"
msgstr "git fast-export [rev-list-opts]"
-#: builtin/fast-export.c:658
+#: builtin/fast-export.c:666
msgid "show progress after <n> objects"
msgstr "hiển thị tiến triển sau <n> đối tượng"
-#: builtin/fast-export.c:660
+#: builtin/fast-export.c:668
msgid "select handling of signed tags"
msgstr "chọn điều khiển của thẻ đã ký"
-#: builtin/fast-export.c:663
+#: builtin/fast-export.c:671
msgid "select handling of tags that tag filtered objects"
msgstr "chọn sự xử lý của các thẻ, cái mà đánh thẻ các đối tượng được lọc ra"
-#: builtin/fast-export.c:666
+#: builtin/fast-export.c:674
msgid "Dump marks to this file"
msgstr "Đổ các đánh dấu này vào tập-tin"
-#: builtin/fast-export.c:668
+#: builtin/fast-export.c:676
msgid "Import marks from this file"
msgstr "nhập vào đánh dấu từ tập tin này"
-#: builtin/fast-export.c:670
+#: builtin/fast-export.c:678
msgid "Fake a tagger when tags lack one"
msgstr "Làm giả một cái thẻ khi thẻ bị thiếu một cái"
-#: builtin/fast-export.c:672
+#: builtin/fast-export.c:680
msgid "Output full tree for each commit"
msgstr "Xuất ra toàn bộ cây cho mỗi lần chuyển giao"
-#: builtin/fast-export.c:674
+#: builtin/fast-export.c:682
msgid "Use the done feature to terminate the stream"
msgstr "Sử dụng tính năng done để chấm dứt luồng dữ liệu"
-#: builtin/fast-export.c:675
+#: builtin/fast-export.c:683
msgid "Skip output of blob data"
msgstr "Bỏ qua kết xuất của dữ liệu blob"
#: builtin/fetch.c:60
msgid "fetch from all remotes"
-msgstr "fetch từ tất cả các máy chủ"
+msgstr "lấy về từ tất cả các máy chủ"
#: builtin/fetch.c:62
msgid "append to .git/FETCH_HEAD instead of overwriting"
#: builtin/fetch.c:67
msgid "fetch from multiple remotes"
-msgstr "fetch từ nhiều máy chủ cùng lúc"
+msgstr "lấy từ nhiều máy chủ cùng lúc"
#: builtin/fetch.c:69
msgid "fetch all tags and associated objects"
-msgstr "lấy (fetch) tất cả các thẻ cùng với các đối tượng liên quan đến nó"
+msgstr "lấy tất cả các thẻ cùng với các đối tượng liên quan đến nó"
#: builtin/fetch.c:71
msgid "do not fetch all tags (--no-tags)"
-msgstr "không lấy (fetch) tất cả các thẻ (--no-tags)"
+msgstr "không lấy tất cả các thẻ (--no-tags)"
#: builtin/fetch.c:73
msgid "prune remote-tracking branches no longer on remote"
#: builtin/fetch.c:75
msgid "control recursive fetching of submodules"
-msgstr "điều khiển việc lấy về (fetch) đệ quy trong các mô-đun-con"
+msgstr "điều khiển việc lấy về đệ quy trong các mô-đun-con"
#: builtin/fetch.c:79
msgid "keep downloaded pack"
#: builtin/fetch.c:81
msgid "allow updating of HEAD ref"
-msgstr "cho phép cập nhật ref (tham chiếu) HEAD"
+msgstr "cho phép cập nhật th.chiếu HEAD"
#: builtin/fetch.c:84
msgid "deepen history of shallow clone"
msgid "convert to a complete repository"
msgstr "chuyển đổi hoàn toàn sang kho git"
-#: builtin/fetch.c:88 builtin/log.c:1130
+#: builtin/fetch.c:88 builtin/log.c:1177
msgid "dir"
msgstr "tmục"
msgid "default mode for recursion"
msgstr "chế độ mặc định cho đệ qui"
-#: builtin/fetch.c:204
+#: builtin/fetch.c:220
msgid "Couldn't find remote ref HEAD"
msgstr "Không thể tìm thấy máy chủ cho tham chiếu HEAD"
-#: builtin/fetch.c:257
+#: builtin/fetch.c:273
#, c-format
msgid "object %s not found"
msgstr "Không tìm thấy đối tượng %s"
-#: builtin/fetch.c:262
+#: builtin/fetch.c:278
msgid "[up to date]"
msgstr "[đã cập nhật]"
-#: builtin/fetch.c:276
+#: builtin/fetch.c:292
#, c-format
msgid "! %-*s %-*s -> %s (can't fetch in current branch)"
msgstr "! %-*s %-*s -> %s (không thể fetch (lấy) về nhánh hiện hành)"
-#: builtin/fetch.c:277 builtin/fetch.c:363
+#: builtin/fetch.c:293 builtin/fetch.c:379
msgid "[rejected]"
msgstr "[Bị từ chối]"
-#: builtin/fetch.c:288
+#: builtin/fetch.c:304
msgid "[tag update]"
msgstr "[cập nhật thẻ]"
-#: builtin/fetch.c:290 builtin/fetch.c:325 builtin/fetch.c:343
+#: builtin/fetch.c:306 builtin/fetch.c:341 builtin/fetch.c:359
msgid " (unable to update local ref)"
msgstr " (không thể cập nhật tham chiếu (ref) nội bộ)"
-#: builtin/fetch.c:308
+#: builtin/fetch.c:324
msgid "[new tag]"
msgstr "[thẻ mới]"
-#: builtin/fetch.c:311
+#: builtin/fetch.c:327
msgid "[new branch]"
msgstr "[nhánh mới]"
-#: builtin/fetch.c:314
+#: builtin/fetch.c:330
msgid "[new ref]"
msgstr "[ref (tham chiếu) mới]"
-#: builtin/fetch.c:359
+#: builtin/fetch.c:375
msgid "unable to update local ref"
msgstr "không thể cập nhật tham chiếu (ref) nội bộ"
-#: builtin/fetch.c:359
+#: builtin/fetch.c:375
msgid "forced update"
msgstr "cưỡng bức cập nhật"
-#: builtin/fetch.c:365
+#: builtin/fetch.c:381
msgid "(non-fast-forward)"
msgstr "(non-fast-forward)"
-#: builtin/fetch.c:396 builtin/fetch.c:688
+#: builtin/fetch.c:412 builtin/fetch.c:718
#, c-format
msgid "cannot open %s: %s\n"
msgstr "không thể mở %s: %s\n"
-#: builtin/fetch.c:405
+#: builtin/fetch.c:421
#, c-format
msgid "%s did not send all necessary objects\n"
msgstr "%s đã không gửi tất cả các đối tượng cần thiết\n"
-#: builtin/fetch.c:491
+#: builtin/fetch.c:520
#, c-format
msgid "From %.*s\n"
msgstr "Từ %.*s\n"
-#: builtin/fetch.c:502
+#: builtin/fetch.c:531
#, c-format
msgid ""
"some local refs could not be updated; try running\n"
"một số tham chiếu (refs) nội bộ không thể được cập nhật; hãy thử chạy\n"
" “git remote prune %s” để bỏ đi những nhánh cũ, hay bị xung đột"
-#: builtin/fetch.c:552
+#: builtin/fetch.c:581
#, c-format
msgid " (%s will become dangling)"
msgstr " (%s sẽ trở thành không đầu (không được quản lý))"
-#: builtin/fetch.c:553
+#: builtin/fetch.c:582
#, c-format
msgid " (%s has become dangling)"
msgstr " (%s đã trở thành không đầu (không được quản lý))"
-#: builtin/fetch.c:560
+#: builtin/fetch.c:589
msgid "[deleted]"
msgstr "[đã xóa]"
-#: builtin/fetch.c:561 builtin/remote.c:1055
+#: builtin/fetch.c:590 builtin/remote.c:1055
msgid "(none)"
msgstr "(không)"
-#: builtin/fetch.c:678
+#: builtin/fetch.c:708
#, c-format
msgid "Refusing to fetch into current branch %s of non-bare repository"
msgstr ""
"Từ chối việc lấy (fetch) vào trong nhánh hiện tại %s của một kho chứa không "
"phải kho trần (bare)"
-#: builtin/fetch.c:712
+#: builtin/fetch.c:742
#, c-format
msgid "Don't know how to fetch from %s"
-msgstr "Không biết làm cách nào để lấy về (fetch) từ %s"
+msgstr "Không biết làm cách nào để lấy về từ %s"
-#: builtin/fetch.c:789
+#: builtin/fetch.c:823
#, c-format
msgid "Option \"%s\" value \"%s\" is not valid for %s"
msgstr "Tùy chọn \"%s\" có giá trị \"%s\" là không hợp lệ cho %s"
-#: builtin/fetch.c:792
+#: builtin/fetch.c:826
#, c-format
msgid "Option \"%s\" is ignored for %s\n"
msgstr "Tùy chọn \"%s\" bị bỏ qua với %s\n"
-#: builtin/fetch.c:894
+#: builtin/fetch.c:928
#, c-format
msgid "Fetching %s\n"
-msgstr "Đang lấy (fetch) %s\n"
+msgstr "Đang lấy về %s\n"
-#: builtin/fetch.c:896 builtin/remote.c:100
+#: builtin/fetch.c:930 builtin/remote.c:100
#, c-format
msgid "Could not fetch %s"
-msgstr "không thể fetch (lấy) %s"
+msgstr "không thể lấy về %s"
-#: builtin/fetch.c:915
+#: builtin/fetch.c:949
msgid ""
"No remote repository specified. Please, specify either a URL or a\n"
"remote name from which new revisions should be fetched."
"Chưa chỉ ra kho chứa máy chủ. Xin hãy chỉ định hoặc là URL hoặc\n"
"tên máy chủ từ cái mà những điểm xét duyệt mới có thể được fetch (lấy về)."
-#: builtin/fetch.c:935
+#: builtin/fetch.c:969
msgid "You need to specify a tag name."
msgstr "Bạn phải định rõ tên thẻ."
-#: builtin/fetch.c:981
+#: builtin/fetch.c:1015
msgid "--depth and --unshallow cannot be used together"
msgstr "tùy chọn --depth và --unshallow không thể sử dụng cùng với nhau"
-#: builtin/fetch.c:983
+#: builtin/fetch.c:1017
msgid "--unshallow on a complete repository does not make sense"
msgstr "--unshallow trên kho hoàn chỉnh là không hợp lý"
-#: builtin/fetch.c:1002
+#: builtin/fetch.c:1036
msgid "fetch --all does not take a repository argument"
msgstr "lệnh lấy về \"fetch --all\" không lấy đối số kho chứa"
-#: builtin/fetch.c:1004
+#: builtin/fetch.c:1038
msgid "fetch --all does not make sense with refspecs"
msgstr "lệnh lấy về \"fetch --all\" không hợp lý với refspecs"
-#: builtin/fetch.c:1015
+#: builtin/fetch.c:1049
#, c-format
msgid "No such remote or remote group: %s"
msgstr "không có nhóm máy chủ hay máy chủ như thế: %s"
-#: builtin/fetch.c:1023
+#: builtin/fetch.c:1057
msgid "Fetching a group and specifying refspecs does not make sense"
msgstr "Việc lấy về cả một nhóm và chỉ định refspecs không hợp lý"
msgstr ""
"git fmt-merge-msg [-m <thông điệp>] [--log[=<n>]|--no-log] [--file <tập-tin>]"
-#: builtin/fmt-merge-msg.c:663 builtin/fmt-merge-msg.c:666 builtin/grep.c:701
-#: builtin/merge.c:188 builtin/show-branch.c:655 builtin/show-ref.c:175
-#: builtin/tag.c:446 parse-options.h:133 parse-options.h:239
+#: builtin/fmt-merge-msg.c:663 builtin/fmt-merge-msg.c:666 builtin/grep.c:700
+#: builtin/merge.c:203 builtin/show-branch.c:655 builtin/show-ref.c:179
+#: builtin/tag.c:446 parse-options.h:133 parse-options.h:243
msgid "n"
msgstr "n"
msgid "grep: failed to create thread: %s"
msgstr "grep: gặp lỗi tạo tuyến (thread): %s"
-#: builtin/grep.c:365
+#: builtin/grep.c:364
#, c-format
msgid "Failed to chdir: %s"
msgstr "Gặp lỗi với lệnh chdir: %s"
-#: builtin/grep.c:443 builtin/grep.c:478
+#: builtin/grep.c:442 builtin/grep.c:477
#, c-format
msgid "unable to read tree (%s)"
msgstr "không thể đọc cây (%s)"
-#: builtin/grep.c:493
+#: builtin/grep.c:492
#, c-format
msgid "unable to grep from object of type %s"
msgstr "không thể thực hiện lệnh grep (lọc tìm) từ đối tượng thuộc kiểu %s"
-#: builtin/grep.c:551
+#: builtin/grep.c:550
#, c-format
msgid "switch `%c' expects a numerical value"
msgstr "chuyển đến “%c” cần một giá trị bằng số"
-#: builtin/grep.c:568
+#: builtin/grep.c:567
#, c-format
msgid "cannot open '%s'"
msgstr "không mở được “%s”"
-#: builtin/grep.c:643
+#: builtin/grep.c:642
msgid "search in index instead of in the work tree"
msgstr "tìm trong bảng mục lục thay vì trong cây làm việc"
-#: builtin/grep.c:645
+#: builtin/grep.c:644
msgid "find in contents not managed by git"
msgstr "tìm trong nội dung không được quản lý bởi git"
-#: builtin/grep.c:647
+#: builtin/grep.c:646
msgid "search in both tracked and untracked files"
msgstr "tìm kiếm các tập tin được và chưa được theo dõi dấu vết"
-#: builtin/grep.c:649
+#: builtin/grep.c:648
msgid "search also in ignored files"
msgstr "tìm cả trong các tập tin đã bị lờ đi"
-#: builtin/grep.c:652
+#: builtin/grep.c:651
msgid "show non-matching lines"
msgstr "hiển thị những dòng không khớp với mẫu"
-#: builtin/grep.c:654
+#: builtin/grep.c:653
msgid "case insensitive matching"
msgstr "phân biệt chữ hoa/thường"
-#: builtin/grep.c:656
+#: builtin/grep.c:655
msgid "match patterns only at word boundaries"
msgstr "chỉ khớp mẫu tại đường ranh giới từ"
-#: builtin/grep.c:658
+#: builtin/grep.c:657
msgid "process binary files as text"
msgstr "xử lý tập tin nhị phân như là dạng văn bản thường"
-#: builtin/grep.c:660
+#: builtin/grep.c:659
msgid "don't match patterns in binary files"
msgstr "không khớp mẫu trong các tập tin nhị phân"
-#: builtin/grep.c:663
+#: builtin/grep.c:662
msgid "descend at most <depth> levels"
msgstr "giảm xuống ít nhất mức <sâu>"
-#: builtin/grep.c:667
+#: builtin/grep.c:666
msgid "use extended POSIX regular expressions"
msgstr "dùng biểu thức chính qui POSIX có mở rộng"
-#: builtin/grep.c:670
+#: builtin/grep.c:669
msgid "use basic POSIX regular expressions (default)"
msgstr "sử dụng biểu thức chính quy kiểu POSIX (mặc định)"
-#: builtin/grep.c:673
+#: builtin/grep.c:672
msgid "interpret patterns as fixed strings"
msgstr "diễn dịch các mẫu như là chuỗi cố định"
-#: builtin/grep.c:676
+#: builtin/grep.c:675
msgid "use Perl-compatible regular expressions"
msgstr "sử dụng biểu thức chính quy tương thích Perl"
-#: builtin/grep.c:679
+#: builtin/grep.c:678
msgid "show line numbers"
msgstr "hiển thị số của dòng"
-#: builtin/grep.c:680
+#: builtin/grep.c:679
msgid "don't show filenames"
msgstr "không hiển thị tên tập tin"
-#: builtin/grep.c:681
+#: builtin/grep.c:680
msgid "show filenames"
msgstr "hiển thị các tên tập tin"
-#: builtin/grep.c:683
+#: builtin/grep.c:682
msgid "show filenames relative to top directory"
msgstr "hiển thị tên tập tin tương đối với thư mục đỉnh (top)"
-#: builtin/grep.c:685
+#: builtin/grep.c:684
msgid "show only filenames instead of matching lines"
msgstr "chỉ hiển thị tên tập tin thay vì những dòng khớp với mẫu"
-#: builtin/grep.c:687
+#: builtin/grep.c:686
msgid "synonym for --files-with-matches"
msgstr "đồng nghĩa với --files-with-matches"
-#: builtin/grep.c:690
+#: builtin/grep.c:689
msgid "show only the names of files without match"
msgstr "chỉ hiển thị tên cho những tập tin không khớp với mẫu"
-#: builtin/grep.c:692
+#: builtin/grep.c:691
msgid "print NUL after filenames"
msgstr "thêm NUL vào sau tên tập tin"
-#: builtin/grep.c:694
+#: builtin/grep.c:693
msgid "show the number of matches instead of matching lines"
msgstr "hiển thị số lượng khớp thay vì những dòng khớp với mẫu"
-#: builtin/grep.c:695
+#: builtin/grep.c:694
msgid "highlight matches"
msgstr "tô sáng cái khớp"
-#: builtin/grep.c:697
+#: builtin/grep.c:696
msgid "print empty line between matches from different files"
msgstr "hiển thị dòng trống giữa các lần khớp từ các tập tin khác biệt"
-#: builtin/grep.c:699
+#: builtin/grep.c:698
msgid "show filename only once above matches from same file"
msgstr ""
"hiển thị tên tập tin một lần phía trên các lần khớp từ cùng một tập tin"
-#: builtin/grep.c:702
+#: builtin/grep.c:701
msgid "show <n> context lines before and after matches"
msgstr "hiển thị <n> dòng nội dung phía trước và sau các lần khớp"
-#: builtin/grep.c:705
+#: builtin/grep.c:704
msgid "show <n> context lines before matches"
msgstr "hiển thị <n> dòng nội dung trước khớp"
-#: builtin/grep.c:707
+#: builtin/grep.c:706
msgid "show <n> context lines after matches"
msgstr "hiển thị <n> dòng nội dung sau khớp"
-#: builtin/grep.c:708
+#: builtin/grep.c:707
msgid "shortcut for -C NUM"
msgstr "Dạng tắt cho -C SỐ"
-#: builtin/grep.c:711
+#: builtin/grep.c:710
msgid "show a line with the function name before matches"
msgstr "hiển thị dòng vói tên hàm trước các lần khớp"
-#: builtin/grep.c:713
+#: builtin/grep.c:712
msgid "show the surrounding function"
msgstr "hiển thị hàm bao quanh"
-#: builtin/grep.c:716
+#: builtin/grep.c:715
msgid "read patterns from file"
msgstr "đọc mẫu từ tập-tin"
-#: builtin/grep.c:718
+#: builtin/grep.c:717
msgid "match <pattern>"
msgstr "match <mẫu>"
-#: builtin/grep.c:720
+#: builtin/grep.c:719
msgid "combine patterns specified with -e"
msgstr "tổ hợp mẫu được chỉ ra với tùy chọn -e"
-#: builtin/grep.c:732
+#: builtin/grep.c:731
msgid "indicate hit with exit status without output"
msgstr "đưa ra gợi ý với trạng thái thoát mà không có kết xuất"
-#: builtin/grep.c:734
+#: builtin/grep.c:733
msgid "show only matches from files that match all patterns"
msgstr "chỉ hiển thị những cái khớp từ tập tin mà nó khớp toàn bộ các mẫu"
-#: builtin/grep.c:736
+#: builtin/grep.c:735
msgid "show parse tree for grep expression"
msgstr "hiển thị cây phân tích cú pháp cho biểu thức “grep” (tìm kiếm)"
-#: builtin/grep.c:740
+#: builtin/grep.c:739
msgid "pager"
msgstr "trang giấy"
-#: builtin/grep.c:740
+#: builtin/grep.c:739
msgid "show matching files in the pager"
msgstr "hiển thị các tập tin khớp trong trang giấy"
-#: builtin/grep.c:743
+#: builtin/grep.c:742
msgid "allow calling of grep(1) (ignored by this build)"
msgstr "cho phép gọi grep(1) (bị bỏ qua bởi lần dịch này)"
-#: builtin/grep.c:744 builtin/show-ref.c:184
+#: builtin/grep.c:743 builtin/show-ref.c:188
msgid "show usage"
msgstr "hiển thị cách dùng"
-#: builtin/grep.c:811
+#: builtin/grep.c:810
msgid "no pattern given."
msgstr "chưa chỉ ra mẫu."
-#: builtin/grep.c:866
+#: builtin/grep.c:865
msgid "--open-files-in-pager only works on the worktree"
msgstr "--open-files-in-pager chỉ làm việc trên cây-làm-việc"
-#: builtin/grep.c:889
+#: builtin/grep.c:888
msgid "--cached or --untracked cannot be used with --no-index."
msgstr "--cached hay --untracked không được sử dụng với --no-index."
-#: builtin/grep.c:894
+#: builtin/grep.c:893
msgid "--no-index or --untracked cannot be used with revs."
msgstr ""
"--no-index hay --untracked không được sử dụng cùng với các tùy chọn liên "
"quan đến revs."
-#: builtin/grep.c:897
+#: builtin/grep.c:896
msgid "--[no-]exclude-standard cannot be used for tracked contents."
msgstr "--[no-]exclude-standard không thể sử dụng cho nội dung lưu dấu vết."
-#: builtin/grep.c:905
+#: builtin/grep.c:904
msgid "both --cached and trees are given."
msgstr "cả hai --cached và các cây phải được chỉ ra."
msgid "process file as it were from this path"
msgstr "xử lý tập tin như là nó đang ở thư mục này"
-#: builtin/help.c:43
+#: builtin/help.c:41
msgid "print all available commands"
msgstr "hiển thị danh sách các câu lệnh người dùng có thể sử dụng"
-#: builtin/help.c:44
+#: builtin/help.c:42
msgid "print list of useful guides"
msgstr "hiển thị danh sách các hướng dẫn hữu dụng"
-#: builtin/help.c:45
+#: builtin/help.c:43
msgid "show man page"
msgstr "hiển thị trang man"
-#: builtin/help.c:46
+#: builtin/help.c:44
msgid "show manual in web browser"
msgstr "hiển thị hướng dẫn sử dụng trong trình duyệt web"
-#: builtin/help.c:48
+#: builtin/help.c:46
msgid "show info page"
msgstr "hiện trang info"
-#: builtin/help.c:54
+#: builtin/help.c:52
msgid "git help [--all] [--guides] [--man|--web|--info] [command]"
msgstr "git help [--all] [--guides] [--man|--web|--info] [lệnh]"
-#: builtin/help.c:66
+#: builtin/help.c:64
#, c-format
msgid "unrecognized help format '%s'"
msgstr "không nhận ra định dạng trợ giúp “%s”"
-#: builtin/help.c:94
+#: builtin/help.c:92
msgid "Failed to start emacsclient."
msgstr "Lỗi khởi chạy emacsclient."
-#: builtin/help.c:107
+#: builtin/help.c:105
msgid "Failed to parse emacsclient version."
msgstr "Gặp lỗi khi phân tích phiên bản emacsclient."
-#: builtin/help.c:115
+#: builtin/help.c:113
#, c-format
msgid "emacsclient version '%d' too old (< 22)."
msgstr "phiên bản của emacsclient “%d” quá cũ (< 22)."
-#: builtin/help.c:133 builtin/help.c:161 builtin/help.c:170 builtin/help.c:178
+#: builtin/help.c:131 builtin/help.c:159 builtin/help.c:168 builtin/help.c:176
#, c-format
msgid "failed to exec '%s': %s"
msgstr "gặp lỗi khi thực thi “%s”: %s"
-#: builtin/help.c:218
+#: builtin/help.c:216
#, c-format
msgid ""
"'%s': path for unsupported man viewer.\n"
"“%s”: đường dẫn không hỗ trợ bộ trình chiếu man.\n"
"Hãy cân nhắc đến việc sử dụng “man.<tool>.cmd” để thay thế."
-#: builtin/help.c:230
+#: builtin/help.c:228
#, c-format
msgid ""
"'%s': cmd for supported man viewer.\n"
"“%s”: cmd (lệnh) hỗ trợ bộ trình chiếu man.\n"
"Hãy cân nhắc đến việc sử dụng “man.<tool>.path” để thay thế."
-#: builtin/help.c:351
+#: builtin/help.c:349
#, c-format
msgid "'%s': unknown man viewer."
msgstr "“%s”: không rõ chương trình xem man."
-#: builtin/help.c:368
+#: builtin/help.c:366
msgid "no man viewer handled the request"
msgstr "không có trình xem trợ giúp dạng manpage tiếp hợp với yêu cầu"
-#: builtin/help.c:376
+#: builtin/help.c:374
msgid "no info viewer handled the request"
msgstr "không có trình xem trợ giúp dạng info tiếp hợp với yêu cầu"
-#: builtin/help.c:422
+#: builtin/help.c:420
msgid "Defining attributes per path"
msgstr "Định nghĩa các thuộc tính cho mỗi đường dẫn"
-#: builtin/help.c:423
+#: builtin/help.c:421
msgid "A Git glossary"
msgstr "Thuật ngữ chuyên môn Git"
-#: builtin/help.c:424
+#: builtin/help.c:422
msgid "Specifies intentionally untracked files to ignore"
-msgstr "Chỉ định các tập tin chưa theo dõi dấu vết bị bỏ qua một cách cố ý"
+msgstr "Chỉ định các tập tin không cần theo dõi"
-#: builtin/help.c:425
+#: builtin/help.c:423
msgid "Defining submodule properties"
msgstr "Định nghĩa thuộc tính mô-đun-con"
-#: builtin/help.c:426
+#: builtin/help.c:424
msgid "Specifying revisions and ranges for Git"
msgstr "Chỉ định điểm xét duyệt và vùng cho Git"
-#: builtin/help.c:427
+#: builtin/help.c:425
msgid "A tutorial introduction to Git (for version 1.5.1 or newer)"
-msgstr "Hướng dẫn cách dùng Git ở mức cơ bản (dành cho bản 1.5.1 hay mới hơn)"
+msgstr "Hướng dẫn cách dùng Git ở mức cơ bản (bản 1.5.1 hay mới hơn)"
-#: builtin/help.c:428
+#: builtin/help.c:426
msgid "An overview of recommended workflows with Git"
msgstr "Tổng quan về luồng công việc khuyến nghị nên dùng với Git."
-#: builtin/help.c:440
+#: builtin/help.c:438
msgid "The common Git guides are:\n"
msgstr "Các chỉ dẫn chung về cách dùng Git là:\n"
-#: builtin/help.c:462 builtin/help.c:478
+#: builtin/help.c:460 builtin/help.c:476
#, c-format
msgid "usage: %s%s"
msgstr "cách sử dụng: %s%s"
-#: builtin/help.c:494
+#: builtin/help.c:492
#, c-format
msgid "`git %s' is aliased to `%s'"
msgstr "“git %s” được đặt bí danh thành “%s”"
-#: builtin/index-pack.c:182
+#: builtin/index-pack.c:184
#, c-format
msgid "object type mismatch at %s"
msgstr "kiểu đối tượng không khớp tại %s"
-#: builtin/index-pack.c:202
+#: builtin/index-pack.c:204
msgid "object of unexpected type"
msgstr "đối tượng của kiểu không mong đợi"
-#: builtin/index-pack.c:239
+#: builtin/index-pack.c:244
#, c-format
msgid "cannot fill %d byte"
msgid_plural "cannot fill %d bytes"
msgstr[0] "không thể điền vào %d byte"
msgstr[1] "không thể điền vào %d byte"
-#: builtin/index-pack.c:249
+#: builtin/index-pack.c:254
msgid "early EOF"
msgstr "vừa đúng lúc EOF"
-#: builtin/index-pack.c:250
+#: builtin/index-pack.c:255
msgid "read error on input"
msgstr "lỗi đọc ở đầu vào"
-#: builtin/index-pack.c:262
+#: builtin/index-pack.c:267
msgid "used more bytes than were available"
msgstr "sử dụng nhiều hơn số lượng byte mà nó sẵn có"
-#: builtin/index-pack.c:269
+#: builtin/index-pack.c:274
msgid "pack too large for current definition of off_t"
msgstr "pack quá lớn so với định nghĩa hiện tại của kiểu off_t"
-#: builtin/index-pack.c:285
+#: builtin/index-pack.c:290
#, c-format
msgid "unable to create '%s'"
msgstr "không thể tạo “%s”"
-#: builtin/index-pack.c:290
+#: builtin/index-pack.c:295
#, c-format
msgid "cannot open packfile '%s'"
msgstr "không thể mở packfile “%s”"
-#: builtin/index-pack.c:304
+#: builtin/index-pack.c:309
msgid "pack signature mismatch"
msgstr "chữ ký cho pack không khớp"
-#: builtin/index-pack.c:306
+#: builtin/index-pack.c:311
#, c-format
msgid "pack version %<PRIu32> unsupported"
msgstr "không hỗ trợ phiên bản pack %<PRIu32>"
-#: builtin/index-pack.c:324
+#: builtin/index-pack.c:329
#, c-format
msgid "pack has bad object at offset %lu: %s"
msgstr "pack có đối tượng sai khoảng bù (offset) %lu: %s"
-#: builtin/index-pack.c:446
+#: builtin/index-pack.c:451
#, c-format
msgid "inflate returned %d"
msgstr "xả nén trả về %d"
-#: builtin/index-pack.c:495
+#: builtin/index-pack.c:500
msgid "offset value overflow for delta base object"
msgstr "tràn giá trị khoảng bù cho đối tượng delta cơ sở"
-#: builtin/index-pack.c:503
+#: builtin/index-pack.c:508
msgid "delta base offset is out of bound"
msgstr "khoảng bù cơ sở cho delta nằm ngoài phạm vi"
-#: builtin/index-pack.c:511
+#: builtin/index-pack.c:516
#, c-format
msgid "unknown object type %d"
msgstr "không hiểu kiểu đối tượng %d"
-#: builtin/index-pack.c:542
+#: builtin/index-pack.c:547
msgid "cannot pread pack file"
msgstr "không thể chạy hàm pread cho tập tin pack"
-#: builtin/index-pack.c:544
+#: builtin/index-pack.c:549
#, c-format
msgid "premature end of pack file, %lu byte missing"
msgid_plural "premature end of pack file, %lu bytes missing"
msgstr[0] "tập tin pack bị kết thúc sớm, %lu byte bị thiếu"
msgstr[1] "tập tin pack bị kết thúc sớm, %lu byte bị thiếu"
-#: builtin/index-pack.c:570
+#: builtin/index-pack.c:575
msgid "serious inflate inconsistency"
msgstr "sự mâu thuẫn xả nén nghiêm trọng"
-#: builtin/index-pack.c:661 builtin/index-pack.c:667 builtin/index-pack.c:690
-#: builtin/index-pack.c:724 builtin/index-pack.c:733
+#: builtin/index-pack.c:666 builtin/index-pack.c:672 builtin/index-pack.c:695
+#: builtin/index-pack.c:729 builtin/index-pack.c:738
#, c-format
msgid "SHA1 COLLISION FOUND WITH %s !"
msgstr "SỰ VA CHẠM SHA1 ĐÃ XẢY RA VỚI %s!"
-#: builtin/index-pack.c:664 builtin/pack-objects.c:170
+#: builtin/index-pack.c:669 builtin/pack-objects.c:170
#: builtin/pack-objects.c:262
#, c-format
msgid "unable to read %s"
msgstr "không thể đọc %s"
-#: builtin/index-pack.c:730
+#: builtin/index-pack.c:735
#, c-format
msgid "cannot read existing object %s"
msgstr "không thể đọc đối tượng đã tồn tại %s"
-#: builtin/index-pack.c:744
+#: builtin/index-pack.c:749
#, c-format
msgid "invalid blob object %s"
msgstr "đối tượng blob không hợp lệ %s"
-#: builtin/index-pack.c:759
+#: builtin/index-pack.c:763
#, c-format
msgid "invalid %s"
msgstr "%s không hợp lệ"
-#: builtin/index-pack.c:761
+#: builtin/index-pack.c:766
msgid "Error in object"
msgstr "Lỗi trong đối tượng"
-#: builtin/index-pack.c:763
+#: builtin/index-pack.c:768
#, c-format
msgid "Not all child objects of %s are reachable"
msgstr "Không phải tất cả các đối tượng con của %s là có thể với tới được"
-#: builtin/index-pack.c:833 builtin/index-pack.c:863
+#: builtin/index-pack.c:838 builtin/index-pack.c:868
msgid "failed to apply delta"
msgstr "gặp lỗi khi áp dụng delta"
-#: builtin/index-pack.c:1004
+#: builtin/index-pack.c:1009
msgid "Receiving objects"
msgstr "Đang nhận về các đối tượng"
-#: builtin/index-pack.c:1004
+#: builtin/index-pack.c:1009
msgid "Indexing objects"
msgstr "Các đối tượng bảng mục lục"
-#: builtin/index-pack.c:1030
+#: builtin/index-pack.c:1035
msgid "pack is corrupted (SHA1 mismatch)"
msgstr "pack bị sai hỏng (SHA1 không khớp)"
-#: builtin/index-pack.c:1035
+#: builtin/index-pack.c:1040
msgid "cannot fstat packfile"
msgstr "không thể fstat packfile"
-#: builtin/index-pack.c:1038
+#: builtin/index-pack.c:1043
msgid "pack has junk at the end"
msgstr "pack có phần thừa ở cuối"
-#: builtin/index-pack.c:1049
+#: builtin/index-pack.c:1054
msgid "confusion beyond insanity in parse_pack_objects()"
msgstr "lộn xộn hơn cả điên rồ khi chạy hàm parse_pack_objects()"
-#: builtin/index-pack.c:1072
+#: builtin/index-pack.c:1077
msgid "Resolving deltas"
msgstr "Đang phân giải các delta"
-#: builtin/index-pack.c:1082
+#: builtin/index-pack.c:1087
#, c-format
msgid "unable to create thread: %s"
msgstr "không thể tạo tuyến: %s"
-#: builtin/index-pack.c:1124
+#: builtin/index-pack.c:1129
msgid "confusion beyond insanity"
msgstr "lộn xộn hơn cả điên rồ"
-#: builtin/index-pack.c:1132
+#: builtin/index-pack.c:1137
#, c-format
msgid "completed with %d local objects"
msgstr "đầy đủ với %d đối tượng nội bộ"
-#: builtin/index-pack.c:1142
+#: builtin/index-pack.c:1147
#, c-format
msgid "Unexpected tail checksum for %s (disk corruption?)"
msgstr "Tổng kiểm tra tail không như mong đợi cho %s (đĩa hỏng?)"
-#: builtin/index-pack.c:1146
+#: builtin/index-pack.c:1151
#, c-format
msgid "pack has %d unresolved delta"
msgid_plural "pack has %d unresolved deltas"
msgstr[0] "pack có %d delta chưa được giải quyết"
msgstr[1] "pack có %d delta chưa được giải quyết"
-#: builtin/index-pack.c:1171
+#: builtin/index-pack.c:1176
#, c-format
msgid "unable to deflate appended object (%d)"
msgstr "không thể xả đối tượng nối thêm (%d)"
-#: builtin/index-pack.c:1250
+#: builtin/index-pack.c:1255
#, c-format
msgid "local object %s is corrupt"
msgstr "đối tượng nội bộ %s bị hỏng"
-#: builtin/index-pack.c:1274
+#: builtin/index-pack.c:1279
msgid "error while closing pack file"
msgstr "gặp lỗi trong khi đóng tập tin pack"
-#: builtin/index-pack.c:1287
+#: builtin/index-pack.c:1292
#, c-format
msgid "cannot write keep file '%s'"
msgstr "không thể ghi tập tin giữ lại “%s”"
-#: builtin/index-pack.c:1295
+#: builtin/index-pack.c:1300
#, c-format
msgid "cannot close written keep file '%s'"
msgstr "không thể đóng tập tin giữ lại đã được ghi “%s”"
-#: builtin/index-pack.c:1308
+#: builtin/index-pack.c:1313
msgid "cannot store pack file"
msgstr "không thể lưu tập tin pack"
-#: builtin/index-pack.c:1319
+#: builtin/index-pack.c:1324
msgid "cannot store index file"
msgstr "không thể lưu trữ tập tin ghi mục lục"
-#: builtin/index-pack.c:1352
+#: builtin/index-pack.c:1357
#, c-format
msgid "bad pack.indexversion=%<PRIu32>"
msgstr "sai pack.indexversion=%<PRIu32>"
-#: builtin/index-pack.c:1358
+#: builtin/index-pack.c:1363
#, c-format
msgid "invalid number of threads specified (%d)"
msgstr "số tuyến chỉ ra không hợp lệ (%d)"
-#: builtin/index-pack.c:1362 builtin/index-pack.c:1535
+#: builtin/index-pack.c:1367 builtin/index-pack.c:1545
#, c-format
msgid "no threads support, ignoring %s"
msgstr "không hỗ trợ đa tuyến, bỏ qua %s"
-#: builtin/index-pack.c:1420
+#: builtin/index-pack.c:1425
#, c-format
msgid "Cannot open existing pack file '%s'"
msgstr "Không thể mở tập tin pack đã sẵn có “%s”"
-#: builtin/index-pack.c:1422
+#: builtin/index-pack.c:1427
#, c-format
msgid "Cannot open existing pack idx file for '%s'"
msgstr "Không thể mở tập tin “pack idx” cho “%s”"
-#: builtin/index-pack.c:1469
+#: builtin/index-pack.c:1474
#, c-format
msgid "non delta: %d object"
msgid_plural "non delta: %d objects"
msgstr[0] "không delta: %d đối tượng"
msgstr[1] "không delta: %d đối tượng"
-#: builtin/index-pack.c:1476
+#: builtin/index-pack.c:1481
#, c-format
msgid "chain length = %d: %lu object"
msgid_plural "chain length = %d: %lu objects"
msgstr[0] "chiều dài xích = %d: %lu đối tượng"
msgstr[1] "chiều dài xích = %d: %lu đối tượng"
-#: builtin/index-pack.c:1503
+#: builtin/index-pack.c:1509
msgid "Cannot come back to cwd"
msgstr "Không thể quay lại cwd"
-#: builtin/index-pack.c:1547 builtin/index-pack.c:1550
-#: builtin/index-pack.c:1562 builtin/index-pack.c:1566
+#: builtin/index-pack.c:1557 builtin/index-pack.c:1560
+#: builtin/index-pack.c:1572 builtin/index-pack.c:1576
#, c-format
msgid "bad %s"
msgstr "%s sai"
-#: builtin/index-pack.c:1580
+#: builtin/index-pack.c:1590
msgid "--fix-thin cannot be used without --stdin"
msgstr "--fix-thin không thể được dùng mà không có --stdin"
-#: builtin/index-pack.c:1584 builtin/index-pack.c:1594
+#: builtin/index-pack.c:1594 builtin/index-pack.c:1604
#, c-format
msgid "packfile name '%s' does not end with '.pack'"
msgstr "tên tập tin packfile “%s” không được kết thúc bằng đuôi “.pack”"
-#: builtin/index-pack.c:1603
+#: builtin/index-pack.c:1613
msgid "--verify with no packfile name given"
msgstr "dùng tùy chọn --verify mà không đưa ra tên packfile"
msgid "specify that the git repository is to be shared amongst several users"
msgstr "chỉ ra cái mà kho git được chia sẻ giữa nhiều người dùng"
-#: builtin/init-db.c:493 builtin/prune-packed.c:77
+#: builtin/init-db.c:493 builtin/prune-packed.c:75
msgid "be quiet"
msgstr "im lặng"
msgid "Cannot access work tree '%s'"
msgstr "không thể truy cập cây (tree) làm việc “%s”"
-#: builtin/log.c:40
+#: builtin/log.c:41
msgid "git log [<options>] [<revision range>] [[--] <path>...]\n"
msgstr "git log [<các-tùy-chọn>] [<vùng xem xét>] [[--] <đường-dẫn>...]\n"
-#: builtin/log.c:41
+#: builtin/log.c:42
msgid " or: git show [options] <object>..."
msgstr " hay: git show [các-tùy-chọn] <đối-tượng>..."
-#: builtin/log.c:103
+#: builtin/log.c:124
msgid "suppress diff output"
msgstr "chặn mọi kết xuất từ diff"
-#: builtin/log.c:104
+#: builtin/log.c:125
msgid "show source"
msgstr "hiển thị mã nguồn"
-#: builtin/log.c:105
+#: builtin/log.c:126
msgid "Use mail map file"
msgstr "Sử dụng tập tin ánh xạ thư"
-#: builtin/log.c:106
+#: builtin/log.c:127
msgid "decorate options"
msgstr "các tùy chọn trang trí"
-#: builtin/log.c:199
+#: builtin/log.c:230
#, c-format
msgid "Final output: %d %s\n"
msgstr "Kết xuất cuối cùng: %d %s\n"
-#: builtin/log.c:422 builtin/log.c:514
+#: builtin/log.c:453 builtin/log.c:545
#, c-format
msgid "Could not read object %s"
msgstr "Không thể đọc đối tượng %s"
-#: builtin/log.c:538
+#: builtin/log.c:569
#, c-format
msgid "Unknown type: %d"
msgstr "Không nhận ra kiểu: %d"
-#: builtin/log.c:638
+#: builtin/log.c:669
msgid "format.headers without value"
msgstr "format.headers không có giá trị cụ thể"
-#: builtin/log.c:720
+#: builtin/log.c:751
msgid "name of output directory is too long"
msgstr "tên của thư mục kết xuất quá dài"
-#: builtin/log.c:736
+#: builtin/log.c:767
#, c-format
msgid "Cannot open patch file %s"
msgstr "Không thể mở tập tin miếng vá: %s"
-#: builtin/log.c:750
+#: builtin/log.c:781
msgid "Need exactly one range."
msgstr "Cần chính xác một vùng."
-#: builtin/log.c:758
+#: builtin/log.c:789
msgid "Not a range."
msgstr "Không phải là một vùng."
-#: builtin/log.c:860
+#: builtin/log.c:891
msgid "Cover letter needs email format"
msgstr "”Cover letter” cần cho định dạng thư"
-#: builtin/log.c:936
+#: builtin/log.c:967
#, c-format
msgid "insane in-reply-to: %s"
msgstr "in-reply-to điên rồ: %s"
-#: builtin/log.c:964
+#: builtin/log.c:995
msgid "git format-patch [options] [<since> | <revision range>]"
msgstr "git format-patch [các-tùy-chọn] [<kể-từ> | <vùng-xem-xét>]"
-#: builtin/log.c:1009
+#: builtin/log.c:1040
msgid "Two output directories?"
msgstr "Hai thư mục kết xuất?"
-#: builtin/log.c:1108
+#: builtin/log.c:1155
msgid "use [PATCH n/m] even with a single patch"
msgstr "dùng [PATCH n/m] ngay cả với miếng vá đơn"
-#: builtin/log.c:1111
+#: builtin/log.c:1158
msgid "use [PATCH] even with multiple patches"
msgstr "dùng [VÁ] ngay cả với các miếng vá phức tạp"
-#: builtin/log.c:1115
+#: builtin/log.c:1162
msgid "print patches to standard out"
msgstr "hiển thị miếng vá ra đầu ra chuẩn"
-#: builtin/log.c:1117
+#: builtin/log.c:1164
msgid "generate a cover letter"
msgstr "tạo bì thư"
-#: builtin/log.c:1119
+#: builtin/log.c:1166
msgid "use simple number sequence for output file names"
msgstr "sử dụng chỗi dãy số dạng đơn giản cho tên tập-tin xuất ra"
-#: builtin/log.c:1120
+#: builtin/log.c:1167
msgid "sfx"
msgstr "sfx"
-#: builtin/log.c:1121
+#: builtin/log.c:1168
msgid "use <sfx> instead of '.patch'"
msgstr "sử dụng <sfx> thay cho “.patch”"
-#: builtin/log.c:1123
+#: builtin/log.c:1170
msgid "start numbering patches at <n> instead of 1"
msgstr "bắt đầu đánh số miếng vá từ <n> thay vì 1"
-#: builtin/log.c:1125
+#: builtin/log.c:1172
msgid "mark the series as Nth re-roll"
msgstr "đánh dấu chuỗi nối tiếp dạng thứ-N re-roll"
-#: builtin/log.c:1127
+#: builtin/log.c:1174
msgid "Use [<prefix>] instead of [PATCH]"
msgstr "Dùng [<tiền-tố>] thay cho [VÁ]"
-#: builtin/log.c:1130
+#: builtin/log.c:1177
msgid "store resulting files in <dir>"
msgstr "lưu các tập tin kết quả trong <t.mục>"
-#: builtin/log.c:1133
+#: builtin/log.c:1180
msgid "don't strip/add [PATCH]"
msgstr "không strip/add [VÁ]"
-#: builtin/log.c:1136
+#: builtin/log.c:1183
msgid "don't output binary diffs"
msgstr "không kết xuất diff (những khác biệt) nhị phân"
-#: builtin/log.c:1138
+#: builtin/log.c:1185
msgid "don't include a patch matching a commit upstream"
msgstr "không bao gồm miếng vá khớp với một lần chuyển giao thượng nguồn"
-#: builtin/log.c:1140
+#: builtin/log.c:1187
msgid "show patch format instead of default (patch + stat)"
msgstr "hiển thị định dạng miếng vá thay vì mặc định (miếng vá + thống kê)"
-#: builtin/log.c:1142
+#: builtin/log.c:1189
msgid "Messaging"
msgstr "Lời nhắn"
-#: builtin/log.c:1143
+#: builtin/log.c:1190
msgid "header"
msgstr "đầu đề thư"
-#: builtin/log.c:1144
+#: builtin/log.c:1191
msgid "add email header"
msgstr "thêm đầu đề thư"
-#: builtin/log.c:1145 builtin/log.c:1147
+#: builtin/log.c:1192 builtin/log.c:1194
msgid "email"
msgstr "thư điện tử"
-#: builtin/log.c:1145
+#: builtin/log.c:1192
msgid "add To: header"
msgstr "thêm To: đầu đề thư"
-#: builtin/log.c:1147
+#: builtin/log.c:1194
msgid "add Cc: header"
msgstr "thêm Cc: đầu đề thư"
-#: builtin/log.c:1149
+#: builtin/log.c:1196
+msgid "ident"
+msgstr "thụt lề"
+
+#: builtin/log.c:1197
+msgid "set From address to <ident> (or committer ident if absent)"
+msgstr ""
+"đặt `Địa chỉ gửi' thành <thụ lề> (hoặc thụt lề người commit nếu bỏ quên)"
+
+#: builtin/log.c:1199
msgid "message-id"
msgstr "message-id"
-#: builtin/log.c:1150
+#: builtin/log.c:1200
msgid "make first mail a reply to <message-id>"
msgstr "dùng thư đầu tiên để trả lời <message-id>"
-#: builtin/log.c:1151 builtin/log.c:1154
+#: builtin/log.c:1201 builtin/log.c:1204
msgid "boundary"
msgstr "ranh giới"
-#: builtin/log.c:1152
+#: builtin/log.c:1202
msgid "attach the patch"
msgstr "đính kèm miếng vá"
-#: builtin/log.c:1155
+#: builtin/log.c:1205
msgid "inline the patch"
msgstr "dùng miếng vá làm nội dung"
-#: builtin/log.c:1159
+#: builtin/log.c:1209
msgid "enable message threading, styles: shallow, deep"
msgstr "cho phép luồng lời nhắn, kiểu: “shallow”, “deep”"
-#: builtin/log.c:1161
+#: builtin/log.c:1211
msgid "signature"
msgstr "chữ ký"
-#: builtin/log.c:1162
+#: builtin/log.c:1212
msgid "add a signature"
msgstr "thêm chữ ký"
-#: builtin/log.c:1164
+#: builtin/log.c:1214
msgid "don't print the patch filenames"
msgstr "không hiển thị các tên tập tin của miếng vá"
-#: builtin/log.c:1248
+#: builtin/log.c:1288
+#, c-format
+msgid "invalid ident line: %s"
+msgstr "dòng thụt lề không hợp lệ: %s"
+
+#: builtin/log.c:1303
msgid "-n and -k are mutually exclusive."
msgstr "-n và -k loại từ lẫn nhau."
-#: builtin/log.c:1250
+#: builtin/log.c:1305
msgid "--subject-prefix and -k are mutually exclusive."
msgstr "--subject-prefix và -k xung khắc nhau."
-#: builtin/log.c:1258
+#: builtin/log.c:1313
msgid "--name-only does not make sense"
msgstr "--name-only không hợp lý"
-#: builtin/log.c:1260
+#: builtin/log.c:1315
msgid "--name-status does not make sense"
msgstr "--name-status không hợp lý"
-#: builtin/log.c:1262
+#: builtin/log.c:1317
msgid "--check does not make sense"
msgstr "--check không hợp lý"
-#: builtin/log.c:1285
+#: builtin/log.c:1340
msgid "standard output, or directory, which one?"
msgstr "đầu ra chuẩn, hay thư mục, chọn cái nào?"
-#: builtin/log.c:1287
+#: builtin/log.c:1342
#, c-format
msgid "Could not create directory '%s'"
msgstr "Không thể tạo thư mục “%s”"
-#: builtin/log.c:1435
+#: builtin/log.c:1490
msgid "Failed to create output files"
msgstr "Gặp lỗi khi tạo các tập tin kết xuất"
-#: builtin/log.c:1484
+#: builtin/log.c:1539
msgid "git cherry [-v] [<upstream> [<head> [<limit>]]]"
msgstr "git cherry [-v] [<thượng-nguồn> [<head> [<giới-hạn>]]]"
-#: builtin/log.c:1539
+#: builtin/log.c:1594
#, c-format
msgid ""
"Could not find a tracked remote branch, please specify <upstream> manually.\n"
"Không tìm thấy nhánh mạng bị theo vết, hãy chỉ định <thượng-nguồn> một cách "
"thủ công.\n"
-#: builtin/log.c:1552 builtin/log.c:1554 builtin/log.c:1566
+#: builtin/log.c:1607 builtin/log.c:1609 builtin/log.c:1621
#, c-format
msgid "Unknown commit %s"
msgstr "Không hiểu lần chuyển giao (commit) %s"
-#: builtin/ls-files.c:402
+#: builtin/ls-files.c:408
msgid "git ls-files [options] [<file>...]"
msgstr "git ls-files [các-tùy-chọn] [<tập-tin>...]"
-#: builtin/ls-files.c:459
+#: builtin/ls-files.c:465
msgid "identify the file status with tags"
msgstr "nhận dạng các trạng thái tập tin với thẻ"
-#: builtin/ls-files.c:461
+#: builtin/ls-files.c:467
msgid "use lowercase letters for 'assume unchanged' files"
msgstr ""
"dùng chữ cái viết thường cho các tập tin “assume unchanged” (giả định không "
"thay đổi)"
-#: builtin/ls-files.c:463
+#: builtin/ls-files.c:469
msgid "show cached files in the output (default)"
msgstr "hiển thị các tập tin được nhớ tạm vào đầu ra (mặc định)"
-#: builtin/ls-files.c:465
+#: builtin/ls-files.c:471
msgid "show deleted files in the output"
msgstr "hiển thị các tập tin đã xóa trong kết xuất"
-#: builtin/ls-files.c:467
+#: builtin/ls-files.c:473
msgid "show modified files in the output"
msgstr "hiển thị các tập tin đã bị sửa đổi ra kết xuất"
-#: builtin/ls-files.c:469
+#: builtin/ls-files.c:475
msgid "show other files in the output"
msgstr "hiển thị các tập tin khác trong kết xuất"
-#: builtin/ls-files.c:471
+#: builtin/ls-files.c:477
msgid "show ignored files in the output"
msgstr "hiển thị các tập tin bị bỏ qua trong kết xuất"
-#: builtin/ls-files.c:474
+#: builtin/ls-files.c:480
msgid "show staged contents' object name in the output"
msgstr "hiển thị tên đối tượng của nội dung được lưu trạng thái ở kết xuất"
-#: builtin/ls-files.c:476
+#: builtin/ls-files.c:482
msgid "show files on the filesystem that need to be removed"
msgstr "hiển thị các tập tin trên hệ thống tập tin mà nó cần được gỡ bỏ"
-#: builtin/ls-files.c:478
+#: builtin/ls-files.c:484
msgid "show 'other' directories' name only"
msgstr "chỉ hiển thị tên của các thư mục “khác”"
-#: builtin/ls-files.c:481
+#: builtin/ls-files.c:487
msgid "don't show empty directories"
msgstr "không hiển thị thư mục rỗng"
-#: builtin/ls-files.c:484
+#: builtin/ls-files.c:490
msgid "show unmerged files in the output"
msgstr "hiển thị các tập tin chưa hòa trộn trong kết xuất"
-#: builtin/ls-files.c:486
+#: builtin/ls-files.c:492
msgid "show resolve-undo information"
msgstr "hiển thị thông tin resolve-undo"
-#: builtin/ls-files.c:488
+#: builtin/ls-files.c:494
msgid "skip files matching pattern"
msgstr "bỏ qua những tập tin khớp với một mẫu"
-#: builtin/ls-files.c:491
+#: builtin/ls-files.c:497
msgid "exclude patterns are read from <file>"
msgstr "mẫu loại trừ được đọc từ <tập tin>"
-#: builtin/ls-files.c:494
+#: builtin/ls-files.c:500
msgid "read additional per-directory exclude patterns in <file>"
msgstr "đọc thêm các mẫu ngoại trừ mỗi thư mục trong <tập tin>"
-#: builtin/ls-files.c:496
+#: builtin/ls-files.c:502
msgid "add the standard git exclusions"
msgstr "thêm loại trừ tiêu chuẩn kiểu git"
-#: builtin/ls-files.c:499
+#: builtin/ls-files.c:505
msgid "make the output relative to the project top directory"
msgstr "làm cho kết xuất liên quan đến thư mục ở mức cao nhất (gốc) của dự án"
-#: builtin/ls-files.c:502
+#: builtin/ls-files.c:508
msgid "if any <file> is not in the index, treat this as an error"
msgstr "nếu <tập tin> bất kỳ không ở trong bảng mục lục, xử lý nó như một lỗi"
-#: builtin/ls-files.c:503
+#: builtin/ls-files.c:509
msgid "tree-ish"
msgstr "tree-ish"
-#: builtin/ls-files.c:504
+#: builtin/ls-files.c:510
msgid "pretend that paths removed since <tree-ish> are still present"
msgstr ""
"giả định rằng các đường dẫn đã bị gỡ bỏ kể từ <tree-ish> nay vẫn hiện diện"
-#: builtin/ls-files.c:506
+#: builtin/ls-files.c:512
msgid "show debugging data"
msgstr "hiển thị dữ liệu gỡ lỗi"
msgid "git merge --abort"
msgstr "git merge --abort"
-#: builtin/merge.c:90
+#: builtin/merge.c:98
msgid "switch `m' requires a value"
msgstr "switch “m” yêu cầu một giá trị"
-#: builtin/merge.c:127
+#: builtin/merge.c:135
#, c-format
msgid "Could not find merge strategy '%s'.\n"
msgstr "Không tìm thấy chiến lược hòa trộn “%s”.\n"
-#: builtin/merge.c:128
+#: builtin/merge.c:136
#, c-format
msgid "Available strategies are:"
msgstr "Các chiến lược sẵn sàng là:"
-#: builtin/merge.c:133
+#: builtin/merge.c:141
#, c-format
msgid "Available custom strategies are:"
msgstr "Các chiến lược tùy chỉnh sẵn sàng là:"
-#: builtin/merge.c:183
+#: builtin/merge.c:198
msgid "do not show a diffstat at the end of the merge"
msgstr "không hiển thị thống kê khác biệt tại cuối của lần hòa trộn"
-#: builtin/merge.c:186
+#: builtin/merge.c:201
msgid "show a diffstat at the end of the merge"
msgstr "hiển thị thống kê khác biệt tại cuối của hòa trộn"
-#: builtin/merge.c:187
+#: builtin/merge.c:202
msgid "(synonym to --stat)"
msgstr "(đồng nghĩa với --stat)"
-#: builtin/merge.c:189
+#: builtin/merge.c:204
msgid "add (at most <n>) entries from shortlog to merge commit message"
msgstr "thêm (ít nhất <n>) mục từ shortlog cho ghi chú chuyển giao hòa trộn"
-#: builtin/merge.c:192
+#: builtin/merge.c:207
msgid "create a single commit instead of doing a merge"
msgstr "tạo một lần chuyển giao (commit) đưon thay vì thực hiện việc hòa trộn"
-#: builtin/merge.c:194
+#: builtin/merge.c:209
msgid "perform a commit if the merge succeeds (default)"
msgstr "thực hiện chuyển giao nếu hòa trộn thành công (mặc định)"
-#: builtin/merge.c:196
+#: builtin/merge.c:211
msgid "edit message before committing"
msgstr "sửa chú thích trước khi chuyển giao (commit)"
-#: builtin/merge.c:198
+#: builtin/merge.c:212
msgid "allow fast-forward (default)"
msgstr "cho phép fast-forward (mặc định)"
-#: builtin/merge.c:200
+#: builtin/merge.c:214
msgid "abort if fast-forward is not possible"
msgstr "bỏ qua nếu fast-forward không thể được"
-#: builtin/merge.c:203
+#: builtin/merge.c:218
msgid "Verify that the named commit has a valid GPG signature"
msgstr "Thẩm tra xem lần chuyển giao có tên đó có chữ ký GPG hợp lệ hay không"
-#: builtin/merge.c:204 builtin/notes.c:866 builtin/revert.c:112
+#: builtin/merge.c:219 builtin/notes.c:738 builtin/revert.c:114
msgid "strategy"
msgstr "chiến lược"
-#: builtin/merge.c:205
+#: builtin/merge.c:220
msgid "merge strategy to use"
msgstr "chiến lược hòa trộn sẽ dùng"
-#: builtin/merge.c:206
+#: builtin/merge.c:221
msgid "option=value"
msgstr "tùy_chọn=giá_trị"
-#: builtin/merge.c:207
+#: builtin/merge.c:222
msgid "option for selected merge strategy"
msgstr "tùy chọn cho chiến lược hòa trộn đã chọn"
-#: builtin/merge.c:209
+#: builtin/merge.c:224
msgid "merge commit message (for a non-fast-forward merge)"
msgstr ""
"hòa trộn ghi chú của lần chuyển giao (dành cho hòa trộn non-fast-forward)"
-#: builtin/merge.c:213
+#: builtin/merge.c:228
msgid "abort the current in-progress merge"
msgstr "bãi bỏ quá trình hòa trộn hiện tại đang thực hiện"
-#: builtin/merge.c:242
+#: builtin/merge.c:257
msgid "could not run stash."
msgstr "không thể chạy stash."
-#: builtin/merge.c:247
+#: builtin/merge.c:262
msgid "stash failed"
msgstr "stash gặp lỗi"
-#: builtin/merge.c:252
+#: builtin/merge.c:267
#, c-format
msgid "not a valid object: %s"
msgstr "không phải là một đối tượng hợp lệ: %s"
-#: builtin/merge.c:271 builtin/merge.c:288
+#: builtin/merge.c:286 builtin/merge.c:303
msgid "read-tree failed"
msgstr "read-tree gặp lỗi"
-#: builtin/merge.c:318
+#: builtin/merge.c:333
msgid " (nothing to squash)"
msgstr " (không có gì để squash)"
-#: builtin/merge.c:331
+#: builtin/merge.c:346
#, c-format
msgid "Squash commit -- not updating HEAD\n"
msgstr "Squash commit -- không cập nhật HEAD\n"
-#: builtin/merge.c:363
+#: builtin/merge.c:378
msgid "Writing SQUASH_MSG"
msgstr "Đang ghi SQUASH_MSG"
-#: builtin/merge.c:365
+#: builtin/merge.c:380
msgid "Finishing SQUASH_MSG"
msgstr "Hoàn thành SQUASH_MSG"
-#: builtin/merge.c:388
+#: builtin/merge.c:403
#, c-format
msgid "No merge message -- not updating HEAD\n"
msgstr "Không thông điệp hòa trộn -- không cập nhật HEAD\n"
-#: builtin/merge.c:438
+#: builtin/merge.c:453
#, c-format
msgid "'%s' does not point to a commit"
msgstr "“%s” không chỉ đến một lần chuyển giao (commit) nào cả"
-#: builtin/merge.c:550
+#: builtin/merge.c:565
#, c-format
msgid "Bad branch.%s.mergeoptions string: %s"
msgstr "Chuỗi branch.%s.mergeoptions sai: %s"
-#: builtin/merge.c:643
+#: builtin/merge.c:657
msgid "git write-tree failed to write a tree"
msgstr "lệnh git write-tree gặp lỗi khi ghi một cây"
-#: builtin/merge.c:671
+#: builtin/merge.c:685
msgid "Not handling anything other than two heads merge."
msgstr "Không cầm nắm gì ngoài hai head hòa trộn"
-#: builtin/merge.c:685
+#: builtin/merge.c:699
#, c-format
msgid "Unknown option for merge-recursive: -X%s"
msgstr "Không hiểu tùy chọn cho merge-recursive: -X%s"
-#: builtin/merge.c:699
+#: builtin/merge.c:713
#, c-format
msgid "unable to write %s"
msgstr "không thể ghi %s"
-#: builtin/merge.c:788
+#: builtin/merge.c:802
#, c-format
msgid "Could not read from '%s'"
msgstr "Không thể đọc từ “%s”"
-#: builtin/merge.c:797
+#: builtin/merge.c:811
#, c-format
msgid "Not committing merge; use 'git commit' to complete the merge.\n"
msgstr ""
"Vẫn chưa hòa trộn các lần chuyển giao (commit); sử dụng lệnh “git commit” để "
"hoàn tất việc hòa trộn.\n"
-#: builtin/merge.c:803
+#: builtin/merge.c:817
#, c-format
msgid ""
"Please enter a commit message to explain why this merge is necessary,\n"
"rỗng\n"
"sẽ hủy bỏ lần chuyển giao (commit).\n"
-#: builtin/merge.c:827
+#: builtin/merge.c:841
msgid "Empty commit message."
msgstr "Chú thích của lần commit (chuyển giao) bị trống rỗng."
-#: builtin/merge.c:839
+#: builtin/merge.c:853
#, c-format
msgid "Wonderful.\n"
msgstr "Thần kỳ.\n"
-#: builtin/merge.c:904
+#: builtin/merge.c:918
#, c-format
msgid "Automatic merge failed; fix conflicts and then commit the result.\n"
msgstr ""
"Việc tự động hòa trộn gặp lỗi; hãy sửa các xung đột sau đó chuyển giao "
"(commit) kết quả.\n"
-#: builtin/merge.c:920
+#: builtin/merge.c:934
#, c-format
msgid "'%s' is not a commit"
msgstr "%s không phải là một lần commit (chuyển giao)"
-#: builtin/merge.c:961
+#: builtin/merge.c:975
msgid "No current branch."
msgstr "không phải nhánh hiện hành"
-#: builtin/merge.c:963
+#: builtin/merge.c:977
msgid "No remote for the current branch."
msgstr "Không có máy chủ cho nhánh hiện hành."
-#: builtin/merge.c:965
+#: builtin/merge.c:979
msgid "No default upstream defined for the current branch."
msgstr "Không có thượng nguồn mặc định được định nghĩa cho nhánh hiện hành."
-#: builtin/merge.c:970
+#: builtin/merge.c:984
#, c-format
-msgid "No remote tracking branch for %s from %s"
+msgid "No remote-tracking branch for %s from %s"
msgstr "Không nhánh mạng theo vết cho %s từ %s"
-#: builtin/merge.c:1057 builtin/merge.c:1214
-#, c-format
-msgid "%s - not something we can merge"
-msgstr "%s - không phải là một số thứ chúng tôi có thể hòa trộn"
-
-#: builtin/merge.c:1125
+#: builtin/merge.c:1140
msgid "There is no merge to abort (MERGE_HEAD missing)."
msgstr ""
"Ở đây không có lần hòa trộn nào được hủy bỏ giữa chừng cả (thiếu MERGE_HEAD)."
-#: builtin/merge.c:1141 git-pull.sh:31
+#: builtin/merge.c:1156 git-pull.sh:31
msgid ""
"You have not concluded your merge (MERGE_HEAD exists).\n"
"Please, commit your changes before you can merge."
"Bạn chưa kết thúc việc hòa trộng (MERGE_HEAD vẫn tồn tại).\n"
"Hãy chuyển giao (commit) các thay đổi trước khi bạn có thể hòa trộn."
-#: builtin/merge.c:1144 git-pull.sh:34
+#: builtin/merge.c:1159 git-pull.sh:34
msgid "You have not concluded your merge (MERGE_HEAD exists)."
msgstr "Bạn chưa kết thúc việc hòa trộng (MERGE_HEAD vẫn tồn tại)."
-#: builtin/merge.c:1148
+#: builtin/merge.c:1163
msgid ""
"You have not concluded your cherry-pick (CHERRY_PICK_HEAD exists).\n"
"Please, commit your changes before you can merge."
"Bạn chưa kết thúc việc cherry-pick (CHERRY_PICK_HEAD vẫn tồn tại).\n"
"Hãy chuyển giao (commit) các thay đổi trước khi bạn có thể hòa trộn."
-#: builtin/merge.c:1151
+#: builtin/merge.c:1166
msgid "You have not concluded your cherry-pick (CHERRY_PICK_HEAD exists)."
msgstr "Bạn chưa kết thúc việc cherry-pick (CHERRY_PICK_HEAD vẫn tồn tại)."
-#: builtin/merge.c:1160
+#: builtin/merge.c:1175
msgid "You cannot combine --squash with --no-ff."
msgstr "Bạn không thể kết hợp --squash với --no-ff."
-#: builtin/merge.c:1165
-msgid "You cannot combine --no-ff with --ff-only."
-msgstr "Bạn không thể kết hợp --no-ff với --ff-only."
-
-#: builtin/merge.c:1172
+#: builtin/merge.c:1184
msgid "No commit specified and merge.defaultToUpstream not set."
msgstr ""
"Không chỉ ra lần chuyển giao (commit) và merge.defaultToUpstream chưa được "
"đặt."
-#: builtin/merge.c:1204
+#: builtin/merge.c:1216
msgid "Can merge only exactly one commit into empty head"
msgstr ""
"Không thể hòa trộn một cách đúng đắn một lần chuyển giao (commit) vào một "
"head rỗng"
-#: builtin/merge.c:1207
+#: builtin/merge.c:1219
msgid "Squash commit into empty head not supported yet"
msgstr "Squash commit vào một head trống rỗng vẫn chưa được hỗ trợ"
-#: builtin/merge.c:1209
+#: builtin/merge.c:1221
msgid "Non-fast-forward commit does not make sense into an empty head"
msgstr ""
"Chuyển giao (commit) không-fast-forward không hợp lý ở trong một head trống "
"rỗng"
-#: builtin/merge.c:1265
+#: builtin/merge.c:1226
+#, c-format
+msgid "%s - not something we can merge"
+msgstr "%s - không phải là một số thứ chúng tôi có thể hòa trộn"
+
+#: builtin/merge.c:1277
#, c-format
msgid "Commit %s has an untrusted GPG signature, allegedly by %s."
msgstr ""
"Lần chuyển giao %s có một chữ ký GPG không đáng tin, được cho là bởi %s."
-#: builtin/merge.c:1268
+#: builtin/merge.c:1280
#, c-format
msgid "Commit %s has a bad GPG signature allegedly by %s."
msgstr "Lần chuyển giao %s có một chữ ký GPG sai, được cho là bởi %s."
#. 'N'
-#: builtin/merge.c:1271
+#: builtin/merge.c:1283
#, c-format
msgid "Commit %s does not have a GPG signature."
msgstr "Lần chuyển giao (commit) %s không có chữ ký GPG."
-#: builtin/merge.c:1274
+#: builtin/merge.c:1286
#, c-format
msgid "Commit %s has a good GPG signature by %s\n"
msgstr "Lần chuyển giao %s có một chữ ký GPG tốt bởi %s\n"
-#: builtin/merge.c:1358
+#: builtin/merge.c:1370
#, c-format
msgid "Updating %s..%s\n"
msgstr "Đang cập nhật %s..%s\n"
-#: builtin/merge.c:1397
+#: builtin/merge.c:1409
#, c-format
msgid "Trying really trivial in-index merge...\n"
msgstr "Đang thử hòa trộn kiểu “trivial in-index”...\n"
-#: builtin/merge.c:1404
+#: builtin/merge.c:1416
#, c-format
msgid "Nope.\n"
msgstr "Không.\n"
-#: builtin/merge.c:1436
+#: builtin/merge.c:1448
msgid "Not possible to fast-forward, aborting."
msgstr "Thực hiện lệnh fast-forward là không thể được, đang bỏ qua."
-#: builtin/merge.c:1459 builtin/merge.c:1538
+#: builtin/merge.c:1471 builtin/merge.c:1550
#, c-format
msgid "Rewinding the tree to pristine...\n"
msgstr "Đang tua lại cây thành thời xa xưa...\n"
-#: builtin/merge.c:1463
+#: builtin/merge.c:1475
#, c-format
msgid "Trying merge strategy %s...\n"
msgstr "Đang thử chiến lược hòa trộn %s...\n"
-#: builtin/merge.c:1529
+#: builtin/merge.c:1541
#, c-format
msgid "No merge strategy handled the merge.\n"
msgstr "Không có chiến lược hòa trộn nào được nắm giữ (handle) sự hòa trộn.\n"
-#: builtin/merge.c:1531
+#: builtin/merge.c:1543
#, c-format
msgid "Merge with strategy %s failed.\n"
msgstr "Hòa trộn với chiến lược %s gặp lỗi.\n"
-#: builtin/merge.c:1540
+#: builtin/merge.c:1552
#, c-format
msgid "Using the %s to prepare resolving by hand.\n"
msgstr "Sử dụng %s để chuẩn bị giải quyết bằng tay.\n"
-#: builtin/merge.c:1552
+#: builtin/merge.c:1564
#, c-format
msgid "Automatic merge went well; stopped before committing as requested\n"
msgstr ""
msgid "renaming '%s' failed"
msgstr "đổi tên %s gặp lỗi"
-#: builtin/name-rev.c:175
+#: builtin/name-rev.c:259
msgid "git name-rev [options] <commit>..."
msgstr "git name-rev [các-tùy-chọn] <commit>..."
-#: builtin/name-rev.c:176
+#: builtin/name-rev.c:260
msgid "git name-rev [options] --all"
msgstr "git name-rev [các-tùy-chọn] --all"
-#: builtin/name-rev.c:177
+#: builtin/name-rev.c:261
msgid "git name-rev [options] --stdin"
msgstr "git name-rev [các-tùy-chọn] --stdin"
-#: builtin/name-rev.c:229
+#: builtin/name-rev.c:313
msgid "print only names (no SHA-1)"
msgstr "chỉ hiển thị tên (không SHA-1)"
-#: builtin/name-rev.c:230
+#: builtin/name-rev.c:314
msgid "only use tags to name the commits"
msgstr "chỉ dùng các thẻ để đặt tên cho các lần chuyển giao"
-#: builtin/name-rev.c:232
+#: builtin/name-rev.c:316
msgid "only use refs matching <pattern>"
msgstr "chỉ sử dụng các tham chiếu (refs) khớp với <mẫu>"
-#: builtin/name-rev.c:234
+#: builtin/name-rev.c:318
msgid "list all commits reachable from all refs"
msgstr ""
"liệt kê tất cả các lần chuyển giao có thể đọc được từ tất cả các tham chiếu"
-#: builtin/name-rev.c:235
+#: builtin/name-rev.c:319
msgid "read from stdin"
msgstr "đọc từ đầu vào tiêu chuẩn"
-#: builtin/name-rev.c:236
+#: builtin/name-rev.c:320
msgid "allow to print `undefined` names"
msgstr "cho phép hiển thị các tên “chưa định nghĩa“"
-#: builtin/notes.c:26
+#: builtin/name-rev.c:326
+msgid "dereference tags in the input (internal use)"
+msgstr "bãi bỏ tham chiếu các thẻ trong đầu vào (dùng nội bộ)"
+
+#: builtin/notes.c:24
msgid "git notes [--ref <notes_ref>] [list [<object>]]"
msgstr "git notes [--ref <notes_ref>] [list [<đối-tượng>]]"
-#: builtin/notes.c:27
+#: builtin/notes.c:25
msgid ""
"git notes [--ref <notes_ref>] add [-f] [-m <msg> | -F <file> | (-c | -C) "
"<object>] [<object>]"
"git notes [--ref <notes_ref>] add [-f] [-m <lời-nhắn> | -F <tập-tin> | (-c | "
"-C) <đối-tượng>] [<đối-tượng>]"
-#: builtin/notes.c:28
+#: builtin/notes.c:26
msgid "git notes [--ref <notes_ref>] copy [-f] <from-object> <to-object>"
msgstr "git notes [--ref <notes_ref>] copy [-f] <từ-đối-tượng> <đến-đối-tượng>"
-#: builtin/notes.c:29
+#: builtin/notes.c:27
msgid ""
"git notes [--ref <notes_ref>] append [-m <msg> | -F <file> | (-c | -C) "
"<object>] [<object>]"
"git notes [--ref <notes_ref>] append [-m <lời-nhắn> | -F <tập-tin> | (-c | -"
"C) <đối-tượng>] [<đối-tượng>]"
-#: builtin/notes.c:30
+#: builtin/notes.c:28
msgid "git notes [--ref <notes_ref>] edit [<object>]"
msgstr "git notes [--ref <notes_ref>] edit [<đối-tượng>]"
-#: builtin/notes.c:31
+#: builtin/notes.c:29
msgid "git notes [--ref <notes_ref>] show [<object>]"
msgstr "git notes [--ref <notes_ref>] show [<đối-tượng>]"
-#: builtin/notes.c:32
+#: builtin/notes.c:30
msgid ""
"git notes [--ref <notes_ref>] merge [-v | -q] [-s <strategy> ] <notes_ref>"
msgstr ""
"git notes [--ref <notes_ref>] merge [-v | -q] [-s <chiến-lược> ] <notes_ref>"
-#: builtin/notes.c:33
+#: builtin/notes.c:31
msgid "git notes merge --commit [-v | -q]"
msgstr "git notes merge --commit [-v | -q]"
-#: builtin/notes.c:34
+#: builtin/notes.c:32
msgid "git notes merge --abort [-v | -q]"
msgstr "git notes merge --abort [-v | -q]"
-#: builtin/notes.c:35
+#: builtin/notes.c:33
msgid "git notes [--ref <notes_ref>] remove [<object>...]"
msgstr "git notes [--ref <notes_ref>] remove [<đối-tượng>...]"
-#: builtin/notes.c:36
+#: builtin/notes.c:34
msgid "git notes [--ref <notes_ref>] prune [-n | -v]"
msgstr "git notes [--ref <notes_ref>] prune [-n | -v]"
-#: builtin/notes.c:37
+#: builtin/notes.c:35
msgid "git notes [--ref <notes_ref>] get-ref"
msgstr "git notes [--ref <notes_ref>] get-ref"
-#: builtin/notes.c:42
+#: builtin/notes.c:40
msgid "git notes [list [<object>]]"
msgstr "git notes [list [<đối tượng>]]"
-#: builtin/notes.c:47
+#: builtin/notes.c:45
msgid "git notes add [<options>] [<object>]"
msgstr "git notes add [<các-tùy-chọn>] [<đối-tượng>]"
-#: builtin/notes.c:52
+#: builtin/notes.c:50
msgid "git notes copy [<options>] <from-object> <to-object>"
msgstr "git notes copy [<các-tùy-chọn>] <từ-đối-tượng> <đến-đối-tượng>"
-#: builtin/notes.c:53
+#: builtin/notes.c:51
msgid "git notes copy --stdin [<from-object> <to-object>]..."
msgstr "git notes copy --stdin [<từ-đối-tượng> <đến-đối-tượng>]..."
-#: builtin/notes.c:58
+#: builtin/notes.c:56
msgid "git notes append [<options>] [<object>]"
msgstr "git notes append [<các-tùy-chọn>] [<đối-tượng>]"
-#: builtin/notes.c:63
+#: builtin/notes.c:61
msgid "git notes edit [<object>]"
msgstr "git notes edit [<đối tượng>]"
-#: builtin/notes.c:68
+#: builtin/notes.c:66
msgid "git notes show [<object>]"
msgstr "git notes show [<đối tượng>]"
-#: builtin/notes.c:73
+#: builtin/notes.c:71
msgid "git notes merge [<options>] <notes_ref>"
msgstr "git notes merge [<các-tùy-chọn>] <notes_ref>"
-#: builtin/notes.c:74
+#: builtin/notes.c:72
msgid "git notes merge --commit [<options>]"
msgstr "git notes merge --commit [<các-tùy-chọn>]"
-#: builtin/notes.c:75
+#: builtin/notes.c:73
msgid "git notes merge --abort [<options>]"
msgstr "git notes merge --abort [<các-tùy-chọn>]"
-#: builtin/notes.c:80
+#: builtin/notes.c:78
msgid "git notes remove [<object>]"
msgstr "git notes remove [<đối tượng>]"
-#: builtin/notes.c:85
+#: builtin/notes.c:83
msgid "git notes prune [<options>]"
msgstr "git notes prune [<các-tùy-chọn>]"
-#: builtin/notes.c:90
+#: builtin/notes.c:88
msgid "git notes get-ref"
msgstr "git notes get-ref"
-#: builtin/notes.c:139
+#: builtin/notes.c:137
#, c-format
msgid "unable to start 'show' for object '%s'"
msgstr "không thể khởi chạy “show” cho đối tượng “%s”"
-#: builtin/notes.c:143
+#: builtin/notes.c:141
msgid "could not read 'show' output"
msgstr "không thể đọc kết xuất “show”"
-#: builtin/notes.c:151
+#: builtin/notes.c:149
#, c-format
msgid "failed to finish 'show' for object '%s'"
msgstr "gặp lỗi khi hoàn thành “show” cho đối tượng “%s”"
-#: builtin/notes.c:169 builtin/tag.c:341
+#: builtin/notes.c:167 builtin/tag.c:341
#, c-format
msgid "could not create file '%s'"
msgstr "không thể tạo tập tin “%s”"
-#: builtin/notes.c:188
+#: builtin/notes.c:186
msgid "Please supply the note contents using either -m or -F option"
msgstr ""
"Xin hãy áp dụng nội dung của ghi chú sử dụng hoặc là tùy chọn -m hoặc là -F"
-#: builtin/notes.c:209 builtin/notes.c:972
+#: builtin/notes.c:207 builtin/notes.c:844
#, c-format
msgid "Removing note for object %s\n"
msgstr "Đang gỡ bỏ ghi chú (note) cho đối tượng %s\n"
-#: builtin/notes.c:214
+#: builtin/notes.c:212
msgid "unable to write note object"
msgstr "không thể ghi đối tượng ghi chú (note)"
-#: builtin/notes.c:216
+#: builtin/notes.c:214
#, c-format
msgid "The note contents has been left in %s"
msgstr "Nội dung ghi chú còn lại %s"
-#: builtin/notes.c:250 builtin/tag.c:540
+#: builtin/notes.c:248 builtin/tag.c:540
#, c-format
msgid "cannot read '%s'"
msgstr "không thể đọc “%s”"
-#: builtin/notes.c:252 builtin/tag.c:543
+#: builtin/notes.c:250 builtin/tag.c:543
#, c-format
msgid "could not open or read '%s'"
msgstr "không thể mở hay đọc “%s”"
-#: builtin/notes.c:271 builtin/notes.c:444 builtin/notes.c:446
-#: builtin/notes.c:506 builtin/notes.c:560 builtin/notes.c:643
-#: builtin/notes.c:648 builtin/notes.c:723 builtin/notes.c:765
-#: builtin/notes.c:967 builtin/tag.c:556
+#: builtin/notes.c:269 builtin/notes.c:316 builtin/notes.c:318
+#: builtin/notes.c:378 builtin/notes.c:432 builtin/notes.c:515
+#: builtin/notes.c:520 builtin/notes.c:595 builtin/notes.c:637
+#: builtin/notes.c:839 builtin/tag.c:556
#, c-format
msgid "Failed to resolve '%s' as a valid ref."
msgstr "Gặp lỗi khi phân giải “%s” như là một tham chiếu (ref) hợp lệ."
-#: builtin/notes.c:274
+#: builtin/notes.c:272
#, c-format
msgid "Failed to read object '%s'."
msgstr "Gặp lỗi khi đọc đối tượng “%s”."
-#: builtin/notes.c:298
-msgid "Cannot commit uninitialized/unreferenced notes tree"
-msgstr ""
-"Không thể chuyển giao (commit) chưa được khởi tạo hoặc không được tham chiếu "
-"cây ghi chú"
-
-#: builtin/notes.c:339
-#, c-format
-msgid "Bad notes.rewriteMode value: '%s'"
-msgstr "Giá trị notes.rewriteMode sai: “%s”"
-
-#: builtin/notes.c:349
-#, c-format
-msgid "Refusing to rewrite notes in %s (outside of refs/notes/)"
-msgstr "Từ chối ghi đè ghi chú trong %s (nằm ngoài của refs/notes/)"
-
-#. TRANSLATORS: The first %s is the name of the
-#. environment variable, the second %s is its value
-#: builtin/notes.c:376
-#, c-format
-msgid "Bad %s value: '%s'"
-msgstr "Giá trị %s sai: “%s”"
-
-#: builtin/notes.c:440
+#: builtin/notes.c:312
#, c-format
msgid "Malformed input line: '%s'."
msgstr "Dòng nhập vào dị hình: “%s”."
-#: builtin/notes.c:455
+#: builtin/notes.c:327
#, c-format
msgid "Failed to copy notes from '%s' to '%s'"
msgstr "Gặp lỗi khi sao chép ghi chú (note) từ “%s” tới “%s”"
-#: builtin/notes.c:499 builtin/notes.c:553 builtin/notes.c:626
-#: builtin/notes.c:638 builtin/notes.c:711 builtin/notes.c:758
-#: builtin/notes.c:1032
+#: builtin/notes.c:371 builtin/notes.c:425 builtin/notes.c:498
+#: builtin/notes.c:510 builtin/notes.c:583 builtin/notes.c:630
+#: builtin/notes.c:904
msgid "too many parameters"
msgstr "quá nhiều đối số"
-#: builtin/notes.c:512 builtin/notes.c:771
+#: builtin/notes.c:384 builtin/notes.c:643
#, c-format
msgid "No note found for object %s."
msgstr "không tìm thấy ghi chú cho đối tượng %s."
-#: builtin/notes.c:534 builtin/notes.c:691
+#: builtin/notes.c:406 builtin/notes.c:563
msgid "note contents as a string"
msgstr "nội dung ghi chú (note) nằm trong một chuỗi"
-#: builtin/notes.c:537 builtin/notes.c:694
+#: builtin/notes.c:409 builtin/notes.c:566
msgid "note contents in a file"
msgstr "nội dung ghi chú (note) nằm trong một tập tin"
-#: builtin/notes.c:539 builtin/notes.c:542 builtin/notes.c:696
-#: builtin/notes.c:699 builtin/tag.c:474
+#: builtin/notes.c:411 builtin/notes.c:414 builtin/notes.c:568
+#: builtin/notes.c:571 builtin/tag.c:474
msgid "object"
msgstr "đối tượng"
-#: builtin/notes.c:540 builtin/notes.c:697
+#: builtin/notes.c:412 builtin/notes.c:569
msgid "reuse and edit specified note object"
msgstr "dùng lại nhưng có sửa chữa đối tượng note đã chỉ ra"
-#: builtin/notes.c:543 builtin/notes.c:700
+#: builtin/notes.c:415 builtin/notes.c:572
msgid "reuse specified note object"
msgstr "dùng lại đối tượng ghi chú (note) đã chỉ ra"
-#: builtin/notes.c:545 builtin/notes.c:613
+#: builtin/notes.c:417 builtin/notes.c:485
msgid "replace existing notes"
msgstr "thay thế ghi chú trước"
-#: builtin/notes.c:579
+#: builtin/notes.c:451
#, c-format
msgid ""
"Cannot add notes. Found existing notes for object %s. Use '-f' to overwrite "
"Không thể thêm các ghi chú. Đã tìm thấy các ghi chú đã có sẵn cho đối tượng "
"%s. Sử dụng tùy chọn “-f” để ghi đè lên các ghi chú cũ"
-#: builtin/notes.c:584 builtin/notes.c:661
+#: builtin/notes.c:456 builtin/notes.c:533
#, c-format
msgid "Overwriting existing notes for object %s\n"
msgstr "Đang ghi đè lên ghi chú cũ cho đối tượng %s\n"
-#: builtin/notes.c:614
+#: builtin/notes.c:486
msgid "read objects from stdin"
msgstr "đọc các đối tượng từ đầu vào tiêu chuẩn"
-#: builtin/notes.c:616
+#: builtin/notes.c:488
msgid "load rewriting config for <command> (implies --stdin)"
msgstr "tải cấu hình chép lại cho <lệnh> (ngầm định là --stdin)"
-#: builtin/notes.c:634
+#: builtin/notes.c:506
msgid "too few parameters"
msgstr "quá ít đối số"
-#: builtin/notes.c:655
+#: builtin/notes.c:527
#, c-format
msgid ""
"Cannot copy notes. Found existing notes for object %s. Use '-f' to overwrite "
"Không thể sao chép các ghi chú. Đã tìm thấy các ghi chú đã có sẵn cho đối "
"tượng %s. Sử dụng tùy chọn “-f” để ghi đè lên các ghi chú cũ"
-#: builtin/notes.c:667
+#: builtin/notes.c:539
#, c-format
msgid "Missing notes on source object %s. Cannot copy."
msgstr "Thiếu ghi chú trên đối tượng nguốn %s. Không thể sao chép."
-#: builtin/notes.c:716
+#: builtin/notes.c:588
#, c-format
msgid ""
"The -m/-F/-c/-C options have been deprecated for the 'edit' subcommand.\n"
"Các tùy chọn -m/-F/-c/-C đã cổ không còn dùng nữa cho lệnh con “edit”.\n"
"Xin hãy sử dụng lệnh sau để thay thế: “git notes add -f -m/-F/-c/-C”.\n"
-#: builtin/notes.c:863
+#: builtin/notes.c:735
msgid "General options"
msgstr "Tùy chọn chung"
-#: builtin/notes.c:865
+#: builtin/notes.c:737
msgid "Merge options"
msgstr "Tùy chọn về hòa trộn"
-#: builtin/notes.c:867
+#: builtin/notes.c:739
msgid ""
"resolve notes conflicts using the given strategy (manual/ours/theirs/union/"
"cat_sort_uniq)"
"phân giải các xung đột “notes” sử dụng chiến lược đã đưa ra (manual/ours/"
"theirs/union/cat_sort_uniq)"
-#: builtin/notes.c:869
+#: builtin/notes.c:741
msgid "Committing unmerged notes"
msgstr "Chuyển giao các note chưa được hòa trộn"
-#: builtin/notes.c:871
+#: builtin/notes.c:743
msgid "finalize notes merge by committing unmerged notes"
msgstr ""
"các note cuối cùng được hòa trộn bởi các note chưa hòa trộn của lần chuyển "
"giao"
-#: builtin/notes.c:873
+#: builtin/notes.c:745
msgid "Aborting notes merge resolution"
msgstr "Hủy bỏ phân giải ghi chú (note) hòa trộn"
-#: builtin/notes.c:875
+#: builtin/notes.c:747
msgid "abort notes merge"
msgstr "bỏ qua hòa trộn các ghi chú (note)"
-#: builtin/notes.c:970
+#: builtin/notes.c:842
#, c-format
msgid "Object %s has no note\n"
msgstr "Đối tượng %s không có ghi chú (note)\n"
-#: builtin/notes.c:982
+#: builtin/notes.c:854
msgid "attempt to remove non-existent note is not an error"
msgstr "cố gắng gỡ bỏ một note chưa từng tồn tại không phải là một lỗi"
-#: builtin/notes.c:985
+#: builtin/notes.c:857
msgid "read object names from the standard input"
msgstr "đọc tên đối tượng từ thiết bị nhập chuẩn"
-#: builtin/notes.c:1066
+#: builtin/notes.c:938
msgid "notes_ref"
msgstr "notes_ref"
-#: builtin/notes.c:1067
+#: builtin/notes.c:939
msgid "use notes from <notes_ref>"
msgstr "dùng “notes” từ <notes_ref>"
-#: builtin/notes.c:1102 builtin/remote.c:1598
+#: builtin/notes.c:974 builtin/remote.c:1598
#, c-format
msgid "Unknown subcommand: %s"
msgstr "Không hiểu câu lệnh con: %s"
" git push %s %s\n"
"%s"
-#: builtin/push.c:121
+#: builtin/push.c:117
#, c-format
msgid ""
"You are not currently on a branch.\n"
"\n"
" git push %s HEAD:<tên-của-nhánh-máy-chủ>\n"
-#: builtin/push.c:128
+#: builtin/push.c:131
#, c-format
msgid ""
"The current branch %s has no upstream branch.\n"
"\n"
" git push --set-upstream %s %s\n"
-#: builtin/push.c:136
+#: builtin/push.c:139
#, c-format
msgid "The current branch %s has multiple upstream branches, refusing to push."
msgstr "Nhánh hiện tại %s có đa nhánh thượng nguồn (upstream), từ chối push."
-#: builtin/push.c:139
+#: builtin/push.c:142
#, c-format
msgid ""
"You are pushing to remote '%s', which is not the upstream of\n"
"nhánh hiện tại “%s” của bạn, mà không báo cho tôi biết là cái gì được push\n"
"để cập nhật nhánh máy chủ nào."
-#: builtin/push.c:151
+#: builtin/push.c:165
msgid ""
"push.default is unset; its implicit value is changing in\n"
"Git 2.0 from 'matching' to 'simple'. To squelch this message\n"
"tự\n"
"“current” thay vì “simple” nếu bạn thỉnh thoảng phải sử dụng bản Git cũ)"
-#: builtin/push.c:199
+#: builtin/push.c:225
msgid ""
"You didn't specify any refspecs to push, and push.default is \"nothing\"."
msgstr ""
"Bạn đã không chỉ ra một refspecs nào để push, và push.default là \"không là "
"gì cả\"."
-#: builtin/push.c:206
+#: builtin/push.c:232
msgid ""
"Updates were rejected because the tip of your current branch is behind\n"
-"its remote counterpart. Merge the remote changes (e.g. 'git pull')\n"
-"before pushing again.\n"
+"its remote counterpart. Integrate the remote changes (e.g.\n"
+"'git pull ...') before pushing again.\n"
"See the 'Note about fast-forwards' in 'git push --help' for details."
msgstr ""
"Việc cập nhật bị từ chối bởi vì đầu mút của nhánh được push nằm đằng sau bộ\n"
"phận tương ứng của máy chủ. Hòa trộn với các thay đổi từ máy chủ (v.d. “git "
-"pull”)\n"
+"pull...”)\n"
"trước khi lại push lần nữa.\n"
-"Xem trong phần “Note about fast-forwards” từ lệnh “git push --help” để có "
-"thông tin chi tiết."
+"Xem “Note about fast-forwards” từ lệnh “git push --help” để có thông tin chi "
+"tiết."
-#: builtin/push.c:212
+#: builtin/push.c:238
msgid ""
"Updates were rejected because a pushed branch tip is behind its remote\n"
"counterpart. If you did not intend to push that branch, you may want to\n"
"thành “simple”, “current” hoặc “upstream” để chỉ push nhánh hiện hành mà "
"thôi."
-#: builtin/push.c:218
+#: builtin/push.c:244
msgid ""
"Updates were rejected because a pushed branch tip is behind its remote\n"
-"counterpart. Check out this branch and merge the remote changes\n"
-"(e.g. 'git pull') before pushing again.\n"
+"counterpart. Check out this branch and integrate the remote changes\n"
+"(e.g. 'git pull ...') before pushing again.\n"
"See the 'Note about fast-forwards' in 'git push --help' for details."
msgstr ""
"Việc cập nhật bị từ chối bởi vì đầu mút của nhánh được push nằm đằng sau bộ\n"
"phận tương ứng của máy chủ. Checkou nhánh này và hòa trộn với các thay đổi "
"từ máy chủ\n"
-"(v.d. “git pull”) trước khi lại push lần nữa.\n"
-"Xem trong phần “Note about fast-forwards” từ lệnh “git push --help” để có "
-"thông tin chi tiết."
+"(v.d. “git pull ...”) trước khi lại push lần nữa.\n"
+"Xem “Note about fast-forwards” từ lệnh “git push --help” để có thông tin chi "
+"tiết."
-#: builtin/push.c:224
+#: builtin/push.c:250
msgid ""
"Updates were rejected because the remote contains work that you do\n"
"not have locally. This is usually caused by another repository pushing\n"
-"to the same ref. You may want to first merge the remote changes (e.g.,\n"
-"'git pull') before pushing again.\n"
+"to the same ref. You may want to first integrate the remote changes\n"
+"(e.g., 'git pull ...') before pushing again.\n"
"See the 'Note about fast-forwards' in 'git push --help' for details."
msgstr ""
"Việc cập nhật bị từ chối bởi vì máy chủ có chứa công việc mà bạn không\n"
-"có ở máy nội bộ của mình. Lỗi này thường có nguyên nhân bởi kho khác đẩy dữ "
-"liệu lên\n"
-"cùng một tham chiếu. Bạn có lẽ muốn hòa trộn với các thay đổi từ máy chủ\n"
-"(v.d. “git pull”) trước khi lại push lần nữa.\n"
-"Xem trong phần “Note about fast-forwards” từ lệnh “git push --help” để có "
-"thông tin chi tiết."
-
-#: builtin/push.c:231
+"có ở máy nội bộ của mình. Lỗi này thường có nguyên nhân bởi kho khác đẩy\n"
+"dữ liệu lên cùng một tham chiếu. Bạn có lẽ muốn hòa trộn với các thay đổi\n"
+"từ máy chủ(v.d. “git pull...”) trước khi lại push lần nữa.\n"
+"Xem “Note about fast-forwards” từ lệnh “git push --help” để có thông tin chi "
+"tiết."
+
+#: builtin/push.c:257
msgid "Updates were rejected because the tag already exists in the remote."
msgstr "Việc cập nhật bị từ chối bởi vì thẻ đã sẵn có từ trước trên máy chủ."
-#: builtin/push.c:234
+#: builtin/push.c:260
msgid ""
"You cannot update a remote ref that points at a non-commit object,\n"
"or update a remote ref to make it point at a non-commit object,\n"
"tượng\n"
"không phải chuyển giao, mà không sử dụng tùy chọn “--force”.\n"
-#: builtin/push.c:294
+#: builtin/push.c:320
#, c-format
msgid "Pushing to %s\n"
msgstr "Đang push (đẩy) lên %s\n"
-#: builtin/push.c:298
+#: builtin/push.c:324
#, c-format
msgid "failed to push some refs to '%s'"
msgstr "gặp lỗi khi push (đẩy lên) một số tham chiếu (ref) đến “%s”"
-#: builtin/push.c:331
+#: builtin/push.c:357
#, c-format
msgid "bad repository '%s'"
msgstr "repository (kho) sai “%s”"
-#: builtin/push.c:332
+#: builtin/push.c:358
msgid ""
"No configured push destination.\n"
"Either specify the URL from the command-line or configure a remote "
"\n"
" git push <tên>\n"
-#: builtin/push.c:347
+#: builtin/push.c:373
msgid "--all and --tags are incompatible"
msgstr "--all và --tags xung khắc nhau"
-#: builtin/push.c:348
+#: builtin/push.c:374
msgid "--all can't be combined with refspecs"
msgstr "--all không thể được tổ hợp cùng với refspecs"
-#: builtin/push.c:353
+#: builtin/push.c:379
msgid "--mirror and --tags are incompatible"
msgstr "--mirror và --tags xung khắc nhau"
-#: builtin/push.c:354
+#: builtin/push.c:380
msgid "--mirror can't be combined with refspecs"
msgstr "--mirror không thể được tổ hợp cùng với refspecs"
-#: builtin/push.c:359
+#: builtin/push.c:385
msgid "--all and --mirror are incompatible"
msgstr "--all và --mirror xung khắc nhau"
-#: builtin/push.c:419
+#: builtin/push.c:445
msgid "repository"
msgstr "kho"
-#: builtin/push.c:420
+#: builtin/push.c:446
msgid "push all refs"
msgstr "push tất cả refs"
-#: builtin/push.c:421
+#: builtin/push.c:447
msgid "mirror all refs"
msgstr "mirror tất cả refs"
-#: builtin/push.c:423
+#: builtin/push.c:449
msgid "delete refs"
msgstr "xóa refs"
-#: builtin/push.c:424
+#: builtin/push.c:450
msgid "push tags (can't be used with --all or --mirror)"
msgstr ""
"các thẻ push (không thể sử dụng cùng với các tùy chọn --all hay --mirror)"
-#: builtin/push.c:427
+#: builtin/push.c:453
msgid "force updates"
msgstr "ép buộc cập nhật"
-#: builtin/push.c:428
+#: builtin/push.c:454
msgid "check"
msgstr "kiểm tra"
-#: builtin/push.c:429
+#: builtin/push.c:455
msgid "control recursive pushing of submodules"
msgstr "điều khiển việc đẩy lên (push) đệ qui của mô-đun-con"
-#: builtin/push.c:431
+#: builtin/push.c:457
msgid "use thin pack"
msgstr "tạo gói nhẹ"
-#: builtin/push.c:432 builtin/push.c:433
+#: builtin/push.c:458 builtin/push.c:459
msgid "receive pack program"
msgstr "nhận về chương trình pack"
-#: builtin/push.c:434
+#: builtin/push.c:460
msgid "set upstream for git pull/status"
msgstr "đặt thượng nguồn (upstream) cho git pull/status"
-#: builtin/push.c:437
+#: builtin/push.c:463
msgid "prune locally removed refs"
msgstr "prune (cắt cụt) những tham chiếu (refs) bị gỡ bỏ"
-#: builtin/push.c:439
+#: builtin/push.c:465
msgid "bypass pre-push hook"
msgstr "vòng qua “pre-push hook”"
-#: builtin/push.c:440
+#: builtin/push.c:466
msgid "push missing but relevant tags"
msgstr "push bị trượt nhưng các thẻ thích hợp"
-#: builtin/push.c:450
+#: builtin/push.c:476
msgid "--delete is incompatible with --all, --mirror and --tags"
msgstr "--delete là xung khắc với các tùy chọn --all, --mirror và --tags"
-#: builtin/push.c:452
+#: builtin/push.c:478
msgid "--delete doesn't make sense without any refs"
msgstr "--delete không hợp lý nếu không có bất kỳ tham chiếu (refs) nào"
"[--index-output=<tập-tin>] (--empty | <tree-ish1> [<tree-ish2> [<tree-"
"ish3>]])"
-#: builtin/read-tree.c:108
+#: builtin/read-tree.c:109
msgid "write resulting index to <file>"
msgstr "ghi mục lục kết quả vào <tập-tin>"
-#: builtin/read-tree.c:111
+#: builtin/read-tree.c:112
msgid "only empty the index"
msgstr "chỉ với bảng mục lục trống rỗng"
-#: builtin/read-tree.c:113
+#: builtin/read-tree.c:114
msgid "Merging"
msgstr "Hòa trộn"
-#: builtin/read-tree.c:115
+#: builtin/read-tree.c:116
msgid "perform a merge in addition to a read"
msgstr "thực hiện một hòa trộn thêm vào việc đọc"
-#: builtin/read-tree.c:117
+#: builtin/read-tree.c:118
msgid "3-way merge if no file level merging required"
msgstr ""
"hòa trộn kiểu “3-way” nếu không có tập tin mức hòa trộn nào được yêu cầu "
-#: builtin/read-tree.c:119
+#: builtin/read-tree.c:120
msgid "3-way merge in presence of adds and removes"
msgstr "hòa trộn 3-way trong sự hiện diện của “adds” và “removes”"
-#: builtin/read-tree.c:121
+#: builtin/read-tree.c:122
msgid "same as -m, but discard unmerged entries"
msgstr "giống với -m, nhưng bỏ qua các mục chưa được hòa trộn"
-#: builtin/read-tree.c:122
+#: builtin/read-tree.c:123
msgid "<subdirectory>/"
msgstr "<thư-mục-con>/"
-#: builtin/read-tree.c:123
+#: builtin/read-tree.c:124
msgid "read the tree into the index under <subdirectory>/"
msgstr "đọc cây vào trong bảng mục lục dưới <thư_mục_con>/"
-#: builtin/read-tree.c:126
+#: builtin/read-tree.c:127
msgid "update working tree with merge result"
msgstr "cập nhật cây làm việc với kết quả hòa trộn"
-#: builtin/read-tree.c:128
+#: builtin/read-tree.c:129
msgid "gitignore"
msgstr "gitignore"
-#: builtin/read-tree.c:129
+#: builtin/read-tree.c:130
msgid "allow explicitly ignored files to be overwritten"
msgstr "cho phép các tập tin rõ ràng bị lờ đi được ghi đè"
-#: builtin/read-tree.c:132
+#: builtin/read-tree.c:133
msgid "don't check the working tree after merging"
msgstr "không kiểm tra cây làm việc sau hòa trộn"
-#: builtin/read-tree.c:133
+#: builtin/read-tree.c:134
msgid "don't update the index or the work tree"
msgstr "không cập nhật bảng mục lục hay cây làm việc"
-#: builtin/read-tree.c:135
+#: builtin/read-tree.c:136
msgid "skip applying sparse checkout filter"
msgstr "bỏ qua áp dụng bộ lọc lấy ra (checkout) thưa thớt"
-#: builtin/read-tree.c:137
+#: builtin/read-tree.c:138
msgid "debug unpack-trees"
msgstr "gỡ lỗi unpack-trees"
+#: builtin/reflog.c:500
+#, c-format
+msgid "%s' for '%s' is not a valid timestamp"
+msgstr "%s' cho '%s' không phải là dấu thời gian hợp lệ"
+
+#: builtin/reflog.c:616 builtin/reflog.c:621
+#, c-format
+msgid "'%s' is not a valid timestamp"
+msgstr "“%s” không phải là dấu thời gian hợp lệ"
+
#: builtin/remote.c:11
msgid "git remote [-v | --verbose]"
msgstr "git remote [-v | --verbose]"
msgid "Failed to find tree of %s."
msgstr "Gặp lỗi khi tìm cây của %s."
-#: builtin/reset.c:98
+#: builtin/reset.c:99
#, c-format
msgid "HEAD is now at %s"
msgstr "HEAD hiện giờ tại %s"
-#: builtin/reset.c:169
+#: builtin/reset.c:172
#, c-format
msgid "Cannot do a %s reset in the middle of a merge."
msgstr "Không thể thực hiện một %s reset ở giữa của quá trình hòa trộn."
-#: builtin/reset.c:248
+#: builtin/reset.c:251
msgid "be quiet, only report errors"
msgstr "làm việc ở chế độ im lặng, chỉ hiển thị khi có lỗi"
-#: builtin/reset.c:250
+#: builtin/reset.c:253
msgid "reset HEAD and index"
msgstr "đặt lại (reset) HEAD và bảng mục lục"
-#: builtin/reset.c:251
+#: builtin/reset.c:254
msgid "reset only HEAD"
msgstr "chỉ đặt lại (reset) HEAD"
-#: builtin/reset.c:253 builtin/reset.c:255
+#: builtin/reset.c:256 builtin/reset.c:258
msgid "reset HEAD, index and working tree"
msgstr "đặt lại HEAD, bảng mục lục và cây làm việc"
-#: builtin/reset.c:257
+#: builtin/reset.c:260
msgid "reset HEAD but keep local changes"
msgstr "đặt lại HEAD nhưng giữ lại các thay đổi nội bộ"
-#: builtin/reset.c:275
+#: builtin/reset.c:278
#, c-format
msgid "Failed to resolve '%s' as a valid revision."
msgstr "Gặp lỗi khi phân giải “%s” như là điểm xét duyệt hợp lệ."
-#: builtin/reset.c:278 builtin/reset.c:286
+#: builtin/reset.c:281 builtin/reset.c:289
#, c-format
msgid "Could not parse object '%s'."
msgstr "không thể phân tích đối tượng “%s”."
-#: builtin/reset.c:283
+#: builtin/reset.c:286
#, c-format
msgid "Failed to resolve '%s' as a valid tree."
msgstr "Gặp lỗi khi phân giải “%s” như là một cây (tree) hợp lệ."
-#: builtin/reset.c:292
+#: builtin/reset.c:295
msgid "--patch is incompatible with --{hard,mixed,soft}"
msgstr "--patch xung khắc với --{hard,mixed,soft}"
-#: builtin/reset.c:301
+#: builtin/reset.c:304
msgid "--mixed with paths is deprecated; use 'git reset -- <paths>' instead."
msgstr ""
"--mixed với các đường dẫn không còn dùng nữa; hãy thay thế bằng lệnh “git "
"reset -- <đường_dẫn>”."
-#: builtin/reset.c:303
+#: builtin/reset.c:306
#, c-format
msgid "Cannot do %s reset with paths."
msgstr "Không thể thực hiện lệnh %s reset với các đường dẫn."
-#: builtin/reset.c:313
+#: builtin/reset.c:316
#, c-format
msgid "%s reset is not allowed in a bare repository"
msgstr "%s reset không được phép trên kho bare (trên máy chủ)"
-#: builtin/reset.c:333
+#: builtin/reset.c:336
#, c-format
msgid "Could not reset index file to revision '%s'."
-msgstr "Không thể đặt lại (reset) bảng mục lục thành điểm xét lại “%s”."
+msgstr "Không thể đặt lại (reset) bảng mục lục thành điểm xét duyệt “%s”."
-#: builtin/reset.c:339
+#: builtin/reset.c:342
msgid "Unstaged changes after reset:"
msgstr "Những thay đổi bị bỏ trạng thái (stage) sau khi reset:"
-#: builtin/reset.c:344
+#: builtin/reset.c:347
msgid "Could not write new index file."
msgstr "Không thể ghi tập tin lưu bảng mục lục mới."
-#: builtin/rev-parse.c:339
+#: builtin/rev-parse.c:345
msgid "git rev-parse --parseopt [options] -- [<args>...]"
msgstr "git rev-parse --parseopt [các-tùy-chọn] -- [<th.số>...]"
-#: builtin/rev-parse.c:344
+#: builtin/rev-parse.c:350
msgid "keep the `--` passed as an arg"
msgstr "giữ “--“ chuyển qua làm tham số"
-#: builtin/rev-parse.c:346
+#: builtin/rev-parse.c:352
msgid "stop parsing after the first non-option argument"
msgstr "dừng phân tích sau đối số đầu tiên không có tùy chọn"
-#: builtin/rev-parse.c:464
+#: builtin/rev-parse.c:470
msgid ""
"git rev-parse --parseopt [options] -- [<args>...]\n"
" or: git rev-parse --sq-quote [<arg>...]\n"
msgid "git cherry-pick <subcommand>"
msgstr "git cherry-pick <lệnh-con>"
-#: builtin/revert.c:70 builtin/revert.c:92
+#: builtin/revert.c:71 builtin/revert.c:94
#, c-format
msgid "%s: %s cannot be used with %s"
msgstr "%s: %s không thể được sử dụng với %s"
-#: builtin/revert.c:103
+#: builtin/revert.c:105
msgid "end revert or cherry-pick sequence"
msgstr "kết thúc cherry-pick hay revert liên tiếp nhau"
-#: builtin/revert.c:104
+#: builtin/revert.c:106
msgid "resume revert or cherry-pick sequence"
msgstr "phục hồi lại cherry-pick hay revert liên tiếp nhau"
-#: builtin/revert.c:105
+#: builtin/revert.c:107
msgid "cancel revert or cherry-pick sequence"
msgstr "không cherry-pick hay revert liên tiếp nhau"
-#: builtin/revert.c:106
+#: builtin/revert.c:108
msgid "don't automatically commit"
msgstr "không commit một cách tự động."
-#: builtin/revert.c:107
+#: builtin/revert.c:109
msgid "edit the commit message"
msgstr "sửa lại chú thích cho commit"
-#: builtin/revert.c:110
+#: builtin/revert.c:112
msgid "parent number"
msgstr "số của cha mẹ"
-#: builtin/revert.c:112
+#: builtin/revert.c:114
msgid "merge strategy"
msgstr "chiến lược hòa trộn"
-#: builtin/revert.c:113
+#: builtin/revert.c:115
msgid "option"
msgstr "tùy chọn"
-#: builtin/revert.c:114
+#: builtin/revert.c:116
msgid "option for merge strategy"
msgstr "tùy chọn cho chiến lược hòa trộn"
-#: builtin/revert.c:125
+#: builtin/revert.c:127
msgid "append commit name"
msgstr "nối thêm tên lần chuyển giao (commit)"
-#: builtin/revert.c:126
+#: builtin/revert.c:128
msgid "allow fast-forward"
msgstr "cho phép fast-forward"
-#: builtin/revert.c:127
+#: builtin/revert.c:129
msgid "preserve initially empty commits"
msgstr "cấm khởi tạo lần chuyển giao trống rỗng"
-#: builtin/revert.c:128
+#: builtin/revert.c:130
msgid "allow commits with empty messages"
msgstr "chấp nhận chuyển giao (commit) mà không ghi chú gì"
-#: builtin/revert.c:129
+#: builtin/revert.c:131
msgid "keep redundant, empty commits"
msgstr "giữ lại các lần chuyển giao dư thừa, rỗng"
-#: builtin/revert.c:133
+#: builtin/revert.c:135
msgid "program error"
msgstr "lỗi chương trình"
-#: builtin/revert.c:223
+#: builtin/revert.c:225
msgid "revert failed"
msgstr "revert gặp lỗi"
-#: builtin/revert.c:238
+#: builtin/revert.c:240
msgid "cherry-pick failed"
msgstr "cherry-pick gặp lỗi"
-#: builtin/rm.c:15
+#: builtin/rm.c:16
msgid "git rm [options] [--] <file>..."
msgstr "git rm [các-tùy-chọn] [--] <tập-tin>..."
-#: builtin/rm.c:64 builtin/rm.c:186
-#, c-format
+#: builtin/rm.c:64
+msgid ""
+"the following submodule (or one of its nested submodules)\n"
+"uses a .git directory:"
+msgid_plural ""
+"the following submodules (or one of its nested submodules)\n"
+"use a .git directory:"
+msgstr[0] ""
+"mô-đun-con sau đây (hay một trong số mô-đun-con bên trong của nó)\n"
+"dùng một thư mục .git:"
+msgstr[1] ""
+"các mô-đun-con sau đây (hay một trong số mô-đun-con bên trong của nó)\n"
+"dùng một thư mục .git:"
+
+#: builtin/rm.c:70
msgid ""
-"submodule '%s' (or one of its nested submodules) uses a .git directory\n"
+"\n"
"(use 'rm -rf' if you really want to remove it including all of its history)"
msgstr ""
-"mô-đun-con “%s” (hoặc cái nằm trong các mô-đun-con) dùng thư mục .git\n"
-"(dùng “rm -rf” nếu bạn thực sự muốn gỡ bỏ nó cùng với tất cả lịch sử của "
+"\n"
+"(dùng /\"rm -rf/\" nếu bạn thực sự muốn gỡ bỏ nó cùng với tất cả lịch sử của "
"chúng)"
-#: builtin/rm.c:174
-#, c-format
+#: builtin/rm.c:230
msgid ""
-"'%s' has staged content different from both the file and the HEAD\n"
-"(use -f to force removal)"
-msgstr ""
-"“%s” có nội dung được lưu trạng thái khác biệt từ cả tập tin và cả HEAD\n"
-"(dùng tùy chọn -f để ép buộc gỡ bỏ)"
+"the following file has staged content different from both the\n"
+"file and the HEAD:"
+msgid_plural ""
+"the following files have staged content different from both the\n"
+"file and the HEAD:"
+msgstr[0] ""
+"tập tin sau đây có trạng thái khác biệt nội dung từ cả tập tin\n"
+"và cả HEAD:"
+msgstr[1] ""
+"các tập tin sau đây có trạng thái khác biệt nội dung từ cả tập tin\n"
+"và cả HEAD:"
-#: builtin/rm.c:180
-#, c-format
+#: builtin/rm.c:235
msgid ""
-"'%s' has changes staged in the index\n"
-"(use --cached to keep the file, or -f to force removal)"
+"\n"
+"(use -f to force removal)"
msgstr ""
-"“%s” có các thay đổi được lưu trạng thái trong bảng mục lục\n"
-"(dùng tùy chọn --cached để giữ tập tin, hoặc -f để ép buộc gỡ bỏ)"
+"\n"
+"(dùng -f để buộc gỡ bỏ)"
-#: builtin/rm.c:191
-#, c-format
+#: builtin/rm.c:239
+msgid "the following file has changes staged in the index:"
+msgid_plural "the following files have changes staged in the index:"
+msgstr[0] "tập tin sau đây có thay đổi trạng thái trong bảng mục lục:"
+msgstr[1] "các tập tin sau đây có thay đổi trạng thái trong bảng mục lục:"
+
+#: builtin/rm.c:243 builtin/rm.c:254
msgid ""
-"'%s' has local modifications\n"
+"\n"
"(use --cached to keep the file, or -f to force removal)"
msgstr ""
-"“%s” có các thay đổi nội bộ\n"
+"\n"
"(dùng tùy chọn --cached để giữ tập tin, hoặc -f để ép buộc gỡ bỏ)"
-#: builtin/rm.c:207
+#: builtin/rm.c:251
+msgid "the following file has local modifications:"
+msgid_plural "the following files have local modifications:"
+msgstr[0] "tập tin sau đây có những thay đổi nội bộ:"
+msgstr[1] "những tập tin sau đây có những thay đổi nội bộ:"
+
+#: builtin/rm.c:269
msgid "do not list removed files"
msgstr "không liệt kê các tập tin đã gỡ bỏ"
-#: builtin/rm.c:208
+#: builtin/rm.c:270
msgid "only remove from the index"
msgstr "chỉ gỡ bỏ từ mục lục"
-#: builtin/rm.c:209
+#: builtin/rm.c:271
msgid "override the up-to-date check"
msgstr "ghi đè lên kiểm tra cập nhật"
-#: builtin/rm.c:210
+#: builtin/rm.c:272
msgid "allow recursive removal"
msgstr "cho phép gỡ bỏ đệ qui"
-#: builtin/rm.c:212
+#: builtin/rm.c:274
msgid "exit with a zero status even if nothing matched"
msgstr "thoát ra với trạng thái khác không thậm chí nếu không có gì khớp"
-#: builtin/rm.c:283
+#: builtin/rm.c:345
#, c-format
msgid "not removing '%s' recursively without -r"
msgstr "không thể gỡ bỏ “%s” một cách đệ qui mà không có tùy chọn -r"
-#: builtin/rm.c:322
+#: builtin/rm.c:384
#, c-format
msgid "git rm: unable to remove %s"
msgstr "git rm: không thể gỡ bỏ %s"
#: builtin/shortlog.c:13
msgid "git shortlog [<options>] [<revision range>] [[--] [<path>...]]"
-msgstr "git shortlog [các-tùy-chọn] [<vùng-xem-xét>] [[--] [<đường-dẫn>...]]"
+msgstr "git shortlog [các-tùy-chọn] [<vùng-xét-duyệt>] [[--] [<đường-dẫn>...]]"
#: builtin/shortlog.c:131
#, c-format
msgid "Missing author: %s"
msgstr "Thiếu tên tác giả: %s"
-#: builtin/shortlog.c:227
+#: builtin/shortlog.c:228
msgid "sort output according to the number of commits per author"
msgstr "sắp xếp kết xuất tuân theo số lượng chuyển giao trên mỗi tác giả"
-#: builtin/shortlog.c:229
+#: builtin/shortlog.c:230
msgid "Suppress commit descriptions, only provides commit count"
msgstr "Chặn mọi mô tả lần chuyển giao, chỉ đưa ra số lượng lần chuyển giao"
-#: builtin/shortlog.c:231
+#: builtin/shortlog.c:232
msgid "Show the email address of each author"
msgstr "Hiển thị thư điện tử cho từng tác giả"
-#: builtin/shortlog.c:232
+#: builtin/shortlog.c:233
msgid "w[,i1[,i2]]"
msgstr "w[,i1[,i2]]"
-#: builtin/shortlog.c:233
+#: builtin/shortlog.c:234
msgid "Linewrap output"
msgstr "Ngắt dòng khi quá dài"
msgid "show commits in topological order"
msgstr "hiển thị các lần chuyển giao theo thứ tự tôpô"
-#: builtin/show-branch.c:671
+#: builtin/show-branch.c:672
msgid "show only commits not on the first branch"
msgstr "chỉ hiển thị các lần chuyển giao không nằm trên nhánh đầu tiên"
-#: builtin/show-branch.c:673
+#: builtin/show-branch.c:674
msgid "show merges reachable from only one tip"
msgstr "hiển thị các lần hòa trộn có thể đọc được chỉ từ một đầu mút"
-#: builtin/show-branch.c:675
-msgid "show commits where no parent comes before its children"
-msgstr "hiển thị các lần chuyển giao nơi mà cha mẹ đến trước con của nó"
+#: builtin/show-branch.c:676
+msgid "topologically sort, maintaining date order where possible"
+msgstr "sắp xếp hình thái học, bảo trì thứ tự ngày nếu có thể"
-#: builtin/show-branch.c:677
+#: builtin/show-branch.c:679
msgid "<n>[,<base>]"
msgstr "<n>[,<cơ sở>]"
-#: builtin/show-branch.c:678
+#: builtin/show-branch.c:680
msgid "show <n> most recent ref-log entries starting at base"
msgstr "hiển thị <n> các mục “ref-log” gần nhất kể từ nền (base)"
msgid "git show-ref --exclude-existing[=pattern] < ref-list"
msgstr "git show-ref --exclude-existing[=mẫu] < ref-list"
-#: builtin/show-ref.c:165
+#: builtin/show-ref.c:168
msgid "only show tags (can be combined with heads)"
msgstr "chỉ hiển thị thẻ (có thể tổ hợp cùng với đầu)"
-#: builtin/show-ref.c:166
+#: builtin/show-ref.c:169
msgid "only show heads (can be combined with tags)"
msgstr "chỉ hiển thị đầu (có thể tổ hợp cùng với thẻ)"
-#: builtin/show-ref.c:167
+#: builtin/show-ref.c:170
msgid "stricter reference checking, requires exact ref path"
msgstr ""
"việc kiểm tra tham chiếu chính xác, đòi hỏi chính xác đường dẫn tham chiếu "
"(ref)"
-#: builtin/show-ref.c:170 builtin/show-ref.c:172
-msgid "show the HEAD reference"
-msgstr "hiển thị tham chiếu của HEAD"
+#: builtin/show-ref.c:173 builtin/show-ref.c:176
+msgid "show the HEAD reference, even if it would be filtered out"
+msgstr "hiển thị tham chiếu HEAD, ngay cả khi nó đã được lọc ra"
-#: builtin/show-ref.c:174
+#: builtin/show-ref.c:178
msgid "dereference tags into object IDs"
msgstr "bãi bỏ tham chiếu các thẻ thành ra các ID đối tượng"
-#: builtin/show-ref.c:176
+#: builtin/show-ref.c:180
msgid "only show SHA1 hash using <n> digits"
msgstr "chỉ hiển thị mã băm SHA1 sử dụng <n> chữ số"
-#: builtin/show-ref.c:180
+#: builtin/show-ref.c:184
msgid "do not print results to stdout (useful with --verify)"
msgstr ""
"không hiển thị kết quả ra đầu ra chuẩn (stdout) (chỉ hữu dụng với --verify)"
-#: builtin/show-ref.c:182
+#: builtin/show-ref.c:186
msgid "show refs from stdin that aren't in local repository"
msgstr ""
"hiển thị các tham chiếu (refs) từ đầu vào tiêu chuẩn (stdin) cái mà không ở "
msgid "only useful for debugging"
msgstr "chỉ hữu ích khi cần gỡ lỗi"
-#: git.c:16
+#: git.c:17
msgid ""
"'git help -a' and 'git help -g' lists available subcommands and some\n"
"concept guides. See 'git help <command>' or 'git help <concept>'\n"
"to read about a specific subcommand or concept."
msgstr ""
"“git help -a” và “git help -g” liệt kê các câu lệnh con sẵn có và một số\n"
-"hướng dẫn khái niệm cơ bản. Xem “git help <lệnh>” hay “git help <khái "
-"niệm>”\n"
-"để đọc các đặc tả cho lệnh hay khái niệm đó."
+"hướng dẫn về khái niệm. Xem “git help <lệnh>” hay “git help <khái-niệm>”\n"
+"để xem các đặc tả cho lệnh hay khái niệm cụ thể."
+
+#: parse-options.h:144
+msgid "expiry date"
+msgstr "ngày hết hạn"
-#: parse-options.h:156
+#: parse-options.h:159
msgid "no-op (backward compatibility)"
msgstr "no-op (tương thích ngược)"
-#: parse-options.h:232
+#: parse-options.h:236
msgid "be more verbose"
msgstr "chi tiết hơn nữa"
-#: parse-options.h:234
+#: parse-options.h:238
msgid "be more quiet"
msgstr "im lặng hơn nữa"
-#: parse-options.h:240
+#: parse-options.h:244
msgid "use <n> digits to display SHA-1s"
msgstr "sử dụng <n> chữ số để hiển thị SHA-1s"
#: common-cmds.h:11
msgid "Checkout a branch or paths to the working tree"
-msgstr "Lấy ra (checkout) một nhánh hay các đường dẫn tới cây làm việc"
+msgstr "Lấy ra một nhánh hay các đường dẫn tới cây làm việc"
#: common-cmds.h:12
msgid "Clone a repository into a new directory"
#: common-cmds.h:14
msgid "Show changes between commits, commit and working tree, etc"
msgstr ""
-"Hiển thị các thay đổi giữa những lần chuyển giao (commit), commit và cây làm "
-"việc, v.v.."
+"Xem các thay đổi giữa những lần chuyển giao,\n"
+" giữa một lần chuyển giao và cây làm việc, v.v.."
#: common-cmds.h:15
msgid "Download objects and refs from another repository"
-msgstr "Các đối tượng và tham chiếu được tải về từ kho chứa khác"
+msgstr "Tải về các đối tượng và tham chiếu từ kho chứa khác"
#: common-cmds.h:16
msgid "Print lines matching a pattern"
#: common-cmds.h:17
msgid "Create an empty Git repository or reinitialize an existing one"
-msgstr ""
-"Tạo một kho git trống rỗng hay khởi tạo lại một kho đã tồn tại từ trước"
+msgstr "Tạo một kho git mới hay khởi tạo lại một kho đã tồn tại từ trước"
#: common-cmds.h:18
msgid "Show commit logs"
-msgstr "Hiển thị nhật ký các lần chuyển giao (commit)"
+msgstr "Hiển thị nhật ký các lần chuyển giao"
#: common-cmds.h:19
msgid "Join two or more development histories together"
-msgstr ""
-"Hợp nhất hai hay nhiều hơn lịch sử của các nhà phát triển phần mềm lại với "
-"nhau"
+msgstr "Hợp nhất hai hay nhiều hơn lịch sử của các nhà phát triển"
#: common-cmds.h:20
msgid "Move or rename a file, a directory, or a symlink"
-msgstr "Di chuyển, đổi tên một tập tin, thư mục hay liên kết tượng trưng"
+msgstr "Di chuyển hay đổi tên một tập tin, thư mục hoặc liên kết mềm"
#: common-cmds.h:21
-msgid "Fetch from and merge with another repository or a local branch"
-msgstr "Lấy về (fetch) và hòa trộn với kho khác hay nhánh nội bộ"
+msgid "Fetch from and integrate with another repository or a local branch"
+msgstr "Lấy về và hợp nhất với kho khác hay một nhánh nội bộ"
#: common-cmds.h:22
msgid "Update remote refs along with associated objects"
-msgstr ""
-"Cập nhật tham chiếu (refs) máy chủ cùng với các đối tượng liên quan đến nó"
+msgstr "Cập nhật th.chiếu máy chủ cùng với các đối tượng liên quan đến nó"
#: common-cmds.h:23
msgid "Forward-port local commits to the updated upstream head"
msgstr ""
-"Forward-port những lần chuyển giao nội bộ tới head thượng nguồn đã cập nhật"
+"Chuyển tiếp những lần chuyển giao nội bộ\n"
+" tới head thượng nguồn đã cập nhật"
#: common-cmds.h:24
msgid "Reset current HEAD to the specified state"
-msgstr "Đặt lại HEAD hiện hành thành một trạng thái được chỉ ra"
+msgstr "Đặt lại HEAD hiện hành thành trạng thái đã cho"
#: common-cmds.h:25
msgid "Remove files from the working tree and from the index"
#: common-cmds.h:28
msgid "Create, list, delete or verify a tag object signed with GPG"
-msgstr ""
-"Tạo, liệt kê, xóa hay xác thực một đối tượng thẻ (tag) mà nó được ký sử dụng "
-"GPG"
+msgstr "Tạo, liệt kê, xóa hay xác thực một đối tượng thẻ được ký bằng GPG"
#: git-am.sh:50
msgid "You need to set your committer info first"
#: git-am.sh:105
#, sh-format
msgid ""
-"When you have resolved this problem, run \"$cmdline --resolved\".\n"
+"When you have resolved this problem, run \"$cmdline --continue\".\n"
"If you prefer to skip this patch, run \"$cmdline --skip\" instead.\n"
"To restore the original branch and stop patching, run \"$cmdline --abort\"."
msgstr ""
-"Khi bạn cần giải quyết vấn đề này hãy chạy lệnh \"$cmdline --resolved\".\n"
+"Khi bạn cần giải quyết vấn đề này hãy chạy lệnh \"$cmdline --continue\".\n"
"Nếu bạn có ý định bỏ qua miếng vá, thay vào đó bạn chạy \"$cmdline --skip"
"\".\n"
"Để phục hồi lại thành nhánh nguyên thủy và dừng việc vá lại thì chạy "
"Tùy chọn -b/--binary đã không dùng từ lâu rồi, và\n"
"nó sẽ được bỏ đi. Xin đừng sử dụng nó thêm nữa."
-#: git-am.sh:477
+#: git-am.sh:479
#, sh-format
msgid "previous rebase directory $dotest still exists but mbox given."
msgstr "thư mục rebase trước $dotest vẫn chưa sẵn sàng nhưng mbox được đưa ra."
-#: git-am.sh:482
+#: git-am.sh:484
msgid "Please make up your mind. --skip or --abort?"
msgstr "Xin hãy rõ ràng. --skip hay --abort?"
-#: git-am.sh:509
+#: git-am.sh:520
+#, sh-format
+msgid ""
+"Stray $dotest directory found.\n"
+"Use \"git am --abort\" to remove it."
+msgstr ""
+"Tìm thấy thư mục lạc $dotest.\n"
+"Dùng \"git am --abort\" để loại bỏ nó đi."
+
+#: git-am.sh:528
msgid "Resolve operation not in progress, we are not resuming."
msgstr "Thao tác phân giải không được tiến hành, chúng ta không phục hồi lại."
-#: git-am.sh:575
+#: git-am.sh:594
#, sh-format
msgid "Dirty index: cannot apply patches (dirty: $files)"
msgstr "Bảng mục lục sai: không thể áp dụng các miếng vá (sai: $files)"
-#: git-am.sh:679
+#: git-am.sh:698
#, sh-format
msgid ""
"Patch is empty. Was it split wrong?\n"
"Để phục hồi lại nhánh nguyên thủy và dừng vá lại hãy chạy lệnh \"$cmdline --"
"abort\"."
-#: git-am.sh:706
+#: git-am.sh:725
msgid "Patch does not have a valid e-mail address."
msgstr "Miếng vá không có địa chỉ e-mail hợp lệ."
-#: git-am.sh:753
+#: git-am.sh:772
msgid "cannot be interactive without stdin connected to a terminal."
msgstr ""
"không thể được tương tác mà không có stdin kết nối với một thiết bị cuối"
-#: git-am.sh:757
+#: git-am.sh:776
msgid "Commit Body is:"
msgstr "Thân của lần chuyển giao (commit) là:"
#. TRANSLATORS: Make sure to include [y], [n], [e], [v] and [a]
#. in your translation. The program will only accept English
#. input at this point.
-#: git-am.sh:764
+#: git-am.sh:783
msgid "Apply? [y]es/[n]o/[e]dit/[v]iew patch/[a]ccept all "
msgstr ""
"Áp dụng? đồng ý [y]/không [n]/chỉnh sửa [e]/hiển thị miếng [v]á/đồng ý tất "
"cả [a] "
-#: git-am.sh:800
+#: git-am.sh:819
#, sh-format
msgid "Applying: $FIRSTLINE"
msgstr "Đang áp dụng (miếng vá): $FIRSTLINE"
-#: git-am.sh:821
+#: git-am.sh:840
msgid ""
"No changes - did you forget to use 'git add'?\n"
"If there is nothing left to stage, chances are that something else\n"
"đã sẵn được đưa vào với cùng nội dung thay đổi; bạn có lẽ muốn bỏ qua miếng "
"vá này."
-#: git-am.sh:829
+#: git-am.sh:848
msgid ""
"You still have unmerged paths in your index\n"
"did you forget to use 'git add'?"
"Bạn vẫn có những đường dẫn chưa được hòa trộn trong bảng mục lục của mình\n"
"bạn đã quên sử dụng lệnh “git add” à?"
-#: git-am.sh:845
+#: git-am.sh:864
msgid "No changes -- Patch already applied."
msgstr "Không thay đổi gì cả -- Miếng vá đã được áp dụng rồi."
-#: git-am.sh:855
+#: git-am.sh:874
#, sh-format
msgid "Patch failed at $msgnum $FIRSTLINE"
msgstr "Vá gặp lỗi tại $msgnum $FIRSTLINE"
-#: git-am.sh:858
+#: git-am.sh:877
#, sh-format
msgid ""
"The copy of the patch that failed is found in:\n"
"Bản sao chép của miếng vá mà nó gặp lỗi thì được tìm thấy trong:\n"
" $dotest/patch"
-#: git-am.sh:876
+#: git-am.sh:895
msgid "applying to an empty history"
msgstr "áp dụng vào một lịch sử trống rỗng"
#: git-bisect.sh:99
#, sh-format
msgid "'$arg' does not appear to be a valid revision"
-msgstr "”$arg” không có vẻ như là một sự xét lại hợp lệ"
+msgstr "”$arg” không có vẻ như là một điểm xét duyệt hợp lệ"
#: git-bisect.sh:117
msgid "Bad HEAD - I need a HEAD"
msgid "Cannot rebase onto multiple branches"
msgstr "Không thể thực hiện lệnh rebase (cơ cấu lại) trên nhiều nhánh"
-#: git-rebase.sh:53
+#: git-rebase.sh:54
msgid ""
"When you have resolved this problem, run \"git rebase --continue\".\n"
"If you prefer to skip this patch, run \"git rebase --skip\" instead.\n"
"Để phục hồi lại thành nhánh nguyên thủy và dừng việc vá lại thì chạy \"git "
"rebase --abort\"."
+#: git-rebase.sh:156
+msgid "Applied autostash."
+msgstr "Đã áp dụng autostash."
+
+#: git-rebase.sh:159
+#, sh-format
+msgid "Cannot store $stash_sha1"
+msgstr "Không thể lưu $stash_sha1"
+
#: git-rebase.sh:160
+msgid ""
+"Applying autostash resulted in conflicts.\n"
+"Your changes are safe in the stash.\n"
+"You can run \"git stash pop\" or \"git stash drop\" it at any time.\n"
+msgstr ""
+"Áp dụng autostash có hiệu quả trong các xung đột.\n"
+"Các thay đổi của bạn an toàn trong stash (tạm cất đi).\n"
+"Bạn có thể chạy lệnh \"git stash pop\" hay \"git stash drop\" bất kỳ lúc "
+"nào.\n"
+
+#: git-rebase.sh:190
msgid "The pre-rebase hook refused to rebase."
msgstr "Móc (hook) pre-rebase từ chối rebase."
-#: git-rebase.sh:165
+#: git-rebase.sh:195
msgid "It looks like git-am is in progress. Cannot rebase."
msgstr ""
"Hình như đang trong quá trình thực hiện lệnh git-am. Không thể chạy lệnh "
"rebase."
-#: git-rebase.sh:296
+#: git-rebase.sh:329
msgid "The --exec option must be used with the --interactive option"
msgstr "Tùy chọn --exec phải được sử dụng cùng với tùy chọn --interactive"
-#: git-rebase.sh:301
+#: git-rebase.sh:334
msgid "No rebase in progress?"
msgstr "Không có tiến trình rebase nào phải không?"
-#: git-rebase.sh:312
+#: git-rebase.sh:345
msgid "The --edit-todo action can only be used during interactive rebase."
msgstr ""
"Hành động “--edit-todo” chỉ có thể dùng trong quá trình “rebase” (sửa lịch "
"sử) tương tác."
-#: git-rebase.sh:319
+#: git-rebase.sh:352
msgid "Cannot read HEAD"
msgstr "Không thể đọc HEAD"
-#: git-rebase.sh:322
+#: git-rebase.sh:355
msgid ""
"You must edit all merge conflicts and then\n"
"mark them as resolved using git add"
"Bạn phải sửa tất cả các lần hòa trộn xung đột và sau\n"
"đó đánh dấu chúng là cần xử lý sử dụng lệnh git add"
-#: git-rebase.sh:340
+#: git-rebase.sh:373
#, sh-format
msgid "Could not move back to $head_name"
msgstr "Không thể quay trở lại $head_name"
-#: git-rebase.sh:359
+#: git-rebase.sh:392
#, sh-format
msgid ""
"It seems that there is already a $state_dir_base directory, and\n"
"\n"
"TÔI: là lệnh bạn vừa gọi!"
-#: git-rebase.sh:404
+#: git-rebase.sh:437
#, sh-format
msgid "invalid upstream $upstream_name"
msgstr "thượng nguồn không hợp lệ $upstream_name"
-#: git-rebase.sh:428
+#: git-rebase.sh:461
#, sh-format
msgid "$onto_name: there are more than one merge bases"
msgstr "$onto_name: ở đây có nhiều hơn một nền móng hòa trộn"
-#: git-rebase.sh:431 git-rebase.sh:435
+#: git-rebase.sh:464 git-rebase.sh:468
#, sh-format
msgid "$onto_name: there is no merge base"
msgstr "$onto_name: ở đây không có nền móng hòa trộn nào"
-#: git-rebase.sh:440
+#: git-rebase.sh:473
#, sh-format
msgid "Does not point to a valid commit: $onto_name"
msgstr "Không chỉ đến một lần chuyển giao (commit) không hợp lệ: $onto_name"
-#: git-rebase.sh:463
+#: git-rebase.sh:496
#, sh-format
msgid "fatal: no such branch: $branch_name"
msgstr "nghiêm trọng: không có nhánh như thế: $branch_name"
-#: git-rebase.sh:483
+#: git-rebase.sh:519
+msgid "Cannot autostash"
+msgstr "Không thể autostash"
+
+#: git-rebase.sh:524
+#, sh-format
+msgid "Created autostash: $stash_abbrev"
+msgstr "Đã tạo autostash: $stash_abbrev"
+
+#: git-rebase.sh:528
msgid "Please commit or stash them."
msgstr "Xin hãy commit hoặc tạm cất (stash) chúng."
-#: git-rebase.sh:501
+#: git-rebase.sh:548
#, sh-format
msgid "Current branch $branch_name is up to date."
msgstr "Nhánh hiện tại $branch_name đã được cập nhật rồi."
-#: git-rebase.sh:504
+#: git-rebase.sh:552
#, sh-format
msgid "Current branch $branch_name is up to date, rebase forced."
msgstr "Nhánh hiện tại $branch_name đã được cập nhật rồi, lệnh rebase ép buộc."
-#: git-rebase.sh:515
+#: git-rebase.sh:563
#, sh-format
msgid "Changes from $mb to $onto:"
msgstr "Thay đổi từ $mb thành $onto:"
#. Detach HEAD and reset the tree
-#: git-rebase.sh:524
+#: git-rebase.sh:572
msgid "First, rewinding head to replay your work on top of it..."
msgstr ""
"Trước tiên, di chuyển head để xem lại các công việc trên đỉnh của nó..."
-#: git-rebase.sh:532
+#: git-rebase.sh:582
#, sh-format
msgid "Fast-forwarded $branch_name to $onto_name."
msgstr "Fast-forward $branch_name thành $onto_name."
msgid "Cannot record working tree state"
msgstr "Không thể ghi lại trạng thái cây làm việc hiện hành"
+#: git-stash.sh:190
+#, sh-format
+msgid "Cannot update $ref_stash with $w_commit"
+msgstr "Không thể cập nhật $ref_stash với $w_commit"
+
#. TRANSLATORS: $option is an invalid option, like
#. `--blah-blah'. The 7 spaces at the beginning of the
#. second line correspond to "error: ". So you should line
#. $ git stash save --blah-blah 2>&1 | head -n 2
#. error: unknown option for 'stash save': --blah-blah
#. To provide a message, use git stash save -- '--blah-blah'
-#: git-stash.sh:202
+#: git-stash.sh:241
#, sh-format
msgid ""
"error: unknown option for 'stash save': $option\n"
" To provide a message, use git stash save -- '$option'"
msgstr ""
"lỗi: không hiểu tùy chọn cho “stash save”: $option\n"
-" Để cung cấp một thông điệp, sử dụng git stash save -- “$option”"
+" Để dùng thông điệp có chứa -- ở đầu, sử dụng git stash save -- \"$option"
+"\""
-#: git-stash.sh:223
+#: git-stash.sh:262
msgid "No local changes to save"
msgstr "Không có thay đổi nội bộ nào được ghi lại"
-#: git-stash.sh:227
+#: git-stash.sh:268
+msgid ""
+"The following untracked files would NOT be saved but need to be removed by "
+"stash save:"
+msgstr ""
+"Các tập tin chưa được theo dõi sau đây KHÔNG được ghi lại nhưng cần được gỡ "
+"bỏ bởi việc ghi lại stash:"
+
+#: git-stash.sh:270
+msgid ""
+"Aborting. Consider using either the --force or --include-untracked option."
+msgstr ""
+"Bãi bỏ. Cân nhắc dùng một trong hai tùy chọn --force và --include-untracked."
+
+#: git-stash.sh:274
msgid "Cannot initialize stash"
msgstr "Không thể khởi tạo stash"
-#: git-stash.sh:235
+#: git-stash.sh:278
msgid "Cannot save the current status"
msgstr "Không thể ghi lại trạng thái hiện hành"
-#: git-stash.sh:253
+#: git-stash.sh:296
msgid "Cannot remove worktree changes"
msgstr "Không thể gỡ bỏ các thay đổi cây-làm-việc"
-#: git-stash.sh:352
+#: git-stash.sh:395
msgid "No stash found."
msgstr "Không tìm thấy stash nào."
-#: git-stash.sh:359
+#: git-stash.sh:402
#, sh-format
msgid "Too many revisions specified: $REV"
-msgstr "Chỉ ra quá nhiều điểm xét lại: $REV"
+msgstr "Chỉ ra quá nhiều điểm xét duyệt: $REV"
-#: git-stash.sh:365
+#: git-stash.sh:408
#, sh-format
msgid "$reference is not valid reference"
msgstr "$reference không phải là tham chiếu hợp lệ"
-#: git-stash.sh:393
+#: git-stash.sh:436
#, sh-format
msgid "'$args' is not a stash-like commit"
msgstr "”$args” không phải là lần chuyển giao (commit) giống-stash"
-#: git-stash.sh:404
+#: git-stash.sh:447
#, sh-format
msgid "'$args' is not a stash reference"
msgstr "”$args” không phải tham chiếu đến stash"
-#: git-stash.sh:412
+#: git-stash.sh:455
msgid "unable to refresh index"
msgstr "không thể làm tươi mới bảng mục lục"
-#: git-stash.sh:416
+#: git-stash.sh:459
msgid "Cannot apply a stash in the middle of a merge"
msgstr "Không thể áp dụng một stash ở giữa của quá trình hòa trộn"
-#: git-stash.sh:424
+#: git-stash.sh:467
msgid "Conflicts in index. Try without --index."
msgstr "Xung đột trong bảng mục lục. Hãy thử mà không dùng tùy chọn --index."
-#: git-stash.sh:426
+#: git-stash.sh:469
msgid "Could not save index tree"
msgstr "Không thể ghi lại cây chỉ mục"
-#: git-stash.sh:460
+#: git-stash.sh:503
msgid "Cannot unstage modified files"
msgstr "Không thể bỏ trạng thía của các tập tin đã được sửa chữa"
-#: git-stash.sh:475
+#: git-stash.sh:518
msgid "Index was not unstashed."
msgstr "Bảng mục lục đã không được bỏ stash."
-#: git-stash.sh:492
+#: git-stash.sh:535
#, sh-format
msgid "Dropped ${REV} ($s)"
-msgstr "Đã hạ xuống ${REV} ($s)"
+msgstr "Đã xóa ${REV} ($s)"
-#: git-stash.sh:493
+#: git-stash.sh:536
#, sh-format
msgid "${REV}: Could not drop stash entry"
msgstr "${REV}: Không thể xóa bỏ mục stash"
-#: git-stash.sh:500
+#: git-stash.sh:543
msgid "No branch name specified"
msgstr "Chưa chỉ ra tên của nhánh"
-#: git-stash.sh:571
+#: git-stash.sh:615
msgid "(To restore them type \"git stash apply\")"
msgstr "(Để phục hồi lại chúng hãy gõ \"git stash apply\")"
-#: git-submodule.sh:91
+#: git-submodule.sh:95
#, sh-format
msgid "cannot strip one component off url '$remoteurl'"
msgstr "không thể tháo bỏ một thành phần ra khỏi “$remoteurl” url"
-#: git-submodule.sh:196
+#: git-submodule.sh:237
#, sh-format
msgid "No submodule mapping found in .gitmodules for path '$sm_path'"
msgstr ""
"Không tìm thấy ánh xạ (mapping) mô-đun-con trong .gitmodules cho đường dẫn "
"“$sm_path”"
-#: git-submodule.sh:239
+#: git-submodule.sh:281
#, sh-format
msgid "Clone of '$url' into submodule path '$sm_path' failed"
msgstr "Nhân bản “$url” vào đường dẫn mô-đun-con “$sm_path” gặp lỗi"
-#: git-submodule.sh:251
+#: git-submodule.sh:293
#, sh-format
msgid "Gitdir '$a' is part of the submodule path '$b' or vice versa"
msgstr ""
"Gitdir “$a” là bộ phận của đường dẫn mô-đun-con “$b” hoặc \"vice versa\""
-#: git-submodule.sh:349
+#: git-submodule.sh:403
+msgid "Relative path can only be used from the toplevel of the working tree"
+msgstr ""
+"Đường dẫn tương đối chỉ có thể dùng từ thư mục ở mức cao nhất của cây làm "
+"việc"
+
+#: git-submodule.sh:413
#, sh-format
msgid "repo URL: '$repo' must be absolute or begin with ./|../"
msgstr ""
"repo URL: “$repo” phải là đường dẫn tuyệt đối hoặc là bắt đầu bằng ./|../"
-#: git-submodule.sh:366
+#: git-submodule.sh:430
#, sh-format
msgid "'$sm_path' already exists in the index"
msgstr "”$sm_path” thực sự đã tồn tại ở bảng mục lục rồi"
-#: git-submodule.sh:370
+#: git-submodule.sh:434
#, sh-format
msgid ""
"The following path is ignored by one of your .gitignore files:\n"
"$sm_path\n"
"Sử dụng -f nếu bạn thực sự muốn thêm nó vào."
-#: git-submodule.sh:388
+#: git-submodule.sh:452
#, sh-format
msgid "Adding existing repo at '$sm_path' to the index"
msgstr "Đang thêm repo có sẵn tại “$sm_path” vào bảng mục lục"
-#: git-submodule.sh:390
+#: git-submodule.sh:454
#, sh-format
msgid "'$sm_path' already exists and is not a valid git repo"
msgstr "”$sm_path” đã tồn tại từ trước và không phải là một kho git hợp lệ"
-#: git-submodule.sh:398
+#: git-submodule.sh:462
#, sh-format
msgid "A git directory for '$sm_name' is found locally with remote(s):"
msgstr ""
"Thư mục git cho “$sm_name” được tìm thấy một cách cục bộ với các máy chủ:"
-#: git-submodule.sh:400
+#: git-submodule.sh:464
#, sh-format
msgid ""
"If you want to reuse this local git directory instead of cloning again from"
msgstr "Nếu bạn muốn dùng lại thư mục git nội bộ này thay vì nhân bản từ nó"
-#: git-submodule.sh:402
+#: git-submodule.sh:466
#, sh-format
msgid ""
"use the '--force' option. If the local git directory is not the correct repo"
msgstr ""
"dùng tùy chọn “--force”. Nếu thư mục git nội bộ không phải là repo (kho) đúng"
-#: git-submodule.sh:403
+#: git-submodule.sh:467
#, sh-format
msgid ""
"or you are unsure what this means choose another name with the '--name' "
"hay bạn không chắc chắn điều đó có nghĩa gì chọn tên khác với tùy chọn “--"
"name”."
-#: git-submodule.sh:405
+#: git-submodule.sh:469
#, sh-format
msgid "Reactivating local git directory for submodule '$sm_name'."
msgstr ""
"Phục hồi sự hoạt động của thư mục git nội bộ cho mô-đun-con “$sm_name”."
-#: git-submodule.sh:417
+#: git-submodule.sh:481
#, sh-format
msgid "Unable to checkout submodule '$sm_path'"
-msgstr "Không thể checkout mô-đun con “$sm_path”"
+msgstr "Không thể checkout mô-đun-con “$sm_path”"
-#: git-submodule.sh:422
+#: git-submodule.sh:486
#, sh-format
msgid "Failed to add submodule '$sm_path'"
-msgstr "Gặp lỗi khi thêm mô-đun con “$sm_path”"
+msgstr "Gặp lỗi khi thêm mô-đun-con “$sm_path”"
-#: git-submodule.sh:431
+#: git-submodule.sh:495
#, sh-format
msgid "Failed to register submodule '$sm_path'"
-msgstr "Gặp lỗi khi đăng ký với hệ thống mô-đun con “$sm_path”"
+msgstr "Gặp lỗi khi đăng ký với hệ thống mô-đun-con “$sm_path”"
-#: git-submodule.sh:474
+#: git-submodule.sh:539
#, sh-format
-msgid "Entering '$prefix$sm_path'"
-msgstr "Đang nhập “$prefix$sm_path”"
+msgid "Entering '$prefix$displaypath'"
+msgstr "Đang vào “$prefix$displaypath”"
-#: git-submodule.sh:488
+#: git-submodule.sh:554
#, sh-format
-msgid "Stopping at '$sm_path'; script returned non-zero status."
-msgstr "Dừng lại tại “$sm_path”; script trả về trạng thái khác không."
+msgid "Stopping at '$prefix$displaypath'; script returned non-zero status."
+msgstr ""
+"Dừng lại tại “$prefix$displaypath”; script trả về trạng thái khác không."
-#: git-submodule.sh:532
+#: git-submodule.sh:600
#, sh-format
-msgid "No url found for submodule path '$sm_path' in .gitmodules"
+msgid "No url found for submodule path '$displaypath' in .gitmodules"
msgstr ""
-"Không tìm thấy url cho đường dẫn mô-đun-con “$sm_path” trong .gitmodules"
+"Không tìm thấy url cho đường dẫn mô-đun-con “$displaypath” trong .gitmodules"
-#: git-submodule.sh:541
+#: git-submodule.sh:609
#, sh-format
-msgid "Failed to register url for submodule path '$sm_path'"
-msgstr "Gặp lỗi khi đăng ký url cho đường dẫn mô-đun-con “$sm_path”"
+msgid "Failed to register url for submodule path '$displaypath'"
+msgstr "Gặp lỗi khi đăng ký url cho đường dẫn mô-đun-con “$displaypath”"
-#: git-submodule.sh:543
+#: git-submodule.sh:611
#, sh-format
-msgid "Submodule '$name' ($url) registered for path '$sm_path'"
-msgstr "Mô-đun-con “$name” ($url) được đăng ký cho đường dẫn “$sm_path”"
+msgid "Submodule '$name' ($url) registered for path '$displaypath'"
+msgstr "Mô-đun-con “$name” ($url) được đăng ký cho đường dẫn “$displaypath”"
-#: git-submodule.sh:551
+#: git-submodule.sh:619
#, sh-format
-msgid "Failed to register update mode for submodule path '$sm_path'"
+msgid "Failed to register update mode for submodule path '$displaypath'"
msgstr ""
-"Gặp lỗi khi đăng ký chế độ cập nhật cho đường dẫn mô-đun-con “$sm_path”"
+"Gặp lỗi khi đăng ký chế độ cập nhật cho đường dẫn mô-đun-con “$displaypath”"
-#: git-submodule.sh:588
+#: git-submodule.sh:656
#, sh-format
msgid "Use '.' if you really want to deinitialize all submodules"
msgstr "Dùng “.” nếu bạn thực sự muốn gỡ bỏ mọi mô-đun-con"
-#: git-submodule.sh:603
+#: git-submodule.sh:673
#, sh-format
-msgid "Submodule work tree '$sm_path' contains a .git directory"
-msgstr "Cây làm việc mô-đun-con “$sm_path” có chứa thư mục .git"
+msgid "Submodule work tree '$displaypath' contains a .git directory"
+msgstr "Cây làm việc mô-đun-con “$displaypath” có chứa thư mục .git"
-#: git-submodule.sh:604
+#: git-submodule.sh:674
#, sh-format
msgid ""
"(use 'rm -rf' if you really want to remove it including all of its history)"
"(dùng “rm -rf” nếu bạn thực sự muốn gỡ bỏ nó cùng với tất cả lịch sử của "
"chúng)"
-#: git-submodule.sh:610
+#: git-submodule.sh:680
#, sh-format
msgid ""
-"Submodule work tree '$sm_path' contains local modifications; use '-f' to "
+"Submodule work tree '$displaypath' contains local modifications; use '-f' to "
"discard them"
msgstr ""
-"Cây làm việc mô-đun-con “$sm_path” chứa các thay đổi nội bộ; hãy dùng “-f” "
-"để loại bỏ chúng đi"
+"Cây làm việc mô-đun-con “$displaypath” chứa các thay đổi nội bộ; hãy dùng “-"
+"f” để loại bỏ chúng đi"
-#: git-submodule.sh:613
+#: git-submodule.sh:683
#, sh-format
-msgid "Cleared directory '$sm_path'"
-msgstr "Thư mục được dọn “$sm_path”"
+msgid "Cleared directory '$displaypath'"
+msgstr "Đã tạo thư mục '$displaypath'"
-#: git-submodule.sh:614
+#: git-submodule.sh:684
#, sh-format
-msgid "Could not remove submodule work tree '$sm_path'"
-msgstr "Không thể gỡ bỏ cây làm việc mô-đun con “$sm_path”"
+msgid "Could not remove submodule work tree '$displaypath'"
+msgstr "Không thể gỡ bỏ cây làm việc mô-đun-con “$displaypath”"
-#: git-submodule.sh:617
+#: git-submodule.sh:687
#, sh-format
-msgid "Could not create empty submodule directory '$sm_path'"
-msgstr "Không thể tạo thư mục mô-đun-con rỗng “$sm_path”"
+msgid "Could not create empty submodule directory '$displaypath'"
+msgstr "Không thể tạo thư mục mô-đun-con rỗng “$displaypath”"
-#: git-submodule.sh:626
+#: git-submodule.sh:696
#, sh-format
-msgid "Submodule '$name' ($url) unregistered for path '$sm_path'"
-msgstr "Mô-đun-con “$name” ($url) được bỏ đăng ký cho đường dẫn “$sm_path”"
+msgid "Submodule '$name' ($url) unregistered for path '$displaypath'"
+msgstr "Mô-đun-con “$name” ($url) được bỏ đăng ký cho đường dẫn “$displaypath”"
-#: git-submodule.sh:731
+#: git-submodule.sh:811
#, sh-format
msgid ""
-"Submodule path '$prefix$sm_path' not initialized\n"
+"Submodule path '$displaypath' not initialized\n"
"Maybe you want to use 'update --init'?"
msgstr ""
-"Đường dẫn mô-đun-con “$prefix$sm_path” chưa được khởi tạo\n"
+"Đường dẫn mô-đun-con “$displaypath” chưa được khởi tạo.\n"
"Có lẽ bạn muốn sử dụng lệnh “update --init”?"
-#: git-submodule.sh:744
+#: git-submodule.sh:824
#, sh-format
-msgid "Unable to find current revision in submodule path '$prefix$sm_path'"
+msgid "Unable to find current revision in submodule path '$displaypath'"
msgstr ""
-"Không tìm thấy điểm xét lại hiện hành trong đường dẫn mô-đun-con “$prefix"
-"$sm_path”"
+"Không tìm thấy điểm xét duyệt hiện hành trong đường dẫn mô-đun-con "
+"“$displaypath”"
-#: git-submodule.sh:753
+#: git-submodule.sh:833
#, sh-format
msgid "Unable to fetch in submodule path '$sm_path'"
msgstr "Không thể lấy về (fetch) trong đường dẫn mô-đun-con “$sm_path”"
-#: git-submodule.sh:777
+#: git-submodule.sh:857
#, sh-format
-msgid "Unable to fetch in submodule path '$prefix$sm_path'"
-msgstr "Không thể lấy về (fetch) trong đường dẫn mô-đun-con “$prefix$sm_path”"
+msgid "Unable to fetch in submodule path '$displaypath'"
+msgstr "Không thể lấy về (fetch) trong đường dẫn mô-đun-con “$displaypath”"
-#: git-submodule.sh:791
+#: git-submodule.sh:871
#, sh-format
-msgid "Unable to rebase '$sha1' in submodule path '$prefix$sm_path'"
-msgstr "Không thể rebase “$sha1” trong đường dẫn mô-đun-con “$prefix$sm_path”"
+msgid "Unable to rebase '$sha1' in submodule path '$displaypath'"
+msgstr "Không thể rebase “$sha1” trong đường dẫn mô-đun-con “$displaypath”"
-#: git-submodule.sh:792
+#: git-submodule.sh:872
#, sh-format
-msgid "Submodule path '$prefix$sm_path': rebased into '$sha1'"
-msgstr "Đường dẫn mô-đun-con “$prefix$sm_path”: được rebase vào trong “$sha1”"
+msgid "Submodule path '$displaypath': rebased into '$sha1'"
+msgstr "Đường dẫn mô-đun-con “$displaypath”: được rebase vào trong “$sha1”"
-#: git-submodule.sh:797
+#: git-submodule.sh:877
#, sh-format
-msgid "Unable to merge '$sha1' in submodule path '$prefix$sm_path'"
+msgid "Unable to merge '$sha1' in submodule path '$displaypath'"
msgstr ""
-"Không thể hòa trộn (merge) “$sha1” trong đường dẫn mô-đun-con “$prefix"
-"$sm_path”"
+"Không thể hòa trộn (merge) “$sha1” trong đường dẫn mô-đun-con “$displaypath”"
-#: git-submodule.sh:798
+#: git-submodule.sh:878
#, sh-format
-msgid "Submodule path '$prefix$sm_path': merged in '$sha1'"
-msgstr "Đường dẫn mô-đun-con “$prefix$sm_path”: được hòa trộn vào “$sha1”"
+msgid "Submodule path '$displaypath': merged in '$sha1'"
+msgstr "Đường dẫn mô-đun-con “$displaypath”: được hòa trộn vào “$sha1”"
-#: git-submodule.sh:803
+#: git-submodule.sh:883
#, sh-format
-msgid "Unable to checkout '$sha1' in submodule path '$prefix$sm_path'"
+msgid ""
+"Execution of '$command $sha1' failed in submodule path '$prefix$sm_path'"
msgstr ""
-"Không thể checkout “$sha1” trong đường dẫn mô-đun-con “$prefix$sm_path”"
+"Thực hiện không thành công lệnh “$command $sha1” trong đường dẫn mô-đun-con "
+"“$prefix$sm_path”"
-#: git-submodule.sh:804
+#: git-submodule.sh:884
#, sh-format
-msgid "Submodule path '$prefix$sm_path': checked out '$sha1'"
-msgstr "Đường dẫn mô-đun-con “$prefix$sm_path”: được checkout “$sha1”"
+msgid "Submodule path '$prefix$sm_path': '$command $sha1'"
+msgstr "Đường dẫn mô-đun-con “$prefix$sm_path”: “$command $sha1”"
-#: git-submodule.sh:831
+#: git-submodule.sh:889
#, sh-format
-msgid "Failed to recurse into submodule path '$prefix$sm_path'"
-msgstr "Gặp lỗi khi đệ quy vào trong đường dẫn mô-đun-con “$prefix$sm_path”"
+msgid "Unable to checkout '$sha1' in submodule path '$displaypath'"
+msgstr "Không thể checkout “$sha1” trong đường dẫn mô-đun-con “$displaypath”"
-#: git-submodule.sh:939
+#: git-submodule.sh:890
+#, sh-format
+msgid "Submodule path '$displaypath': checked out '$sha1'"
+msgstr "Đường dẫn mô-đun-con “$displaypath”: đã checkout “$sha1”"
+
+#: git-submodule.sh:917
+#, sh-format
+msgid "Failed to recurse into submodule path '$displaypath'"
+msgstr "Gặp lỗi khi đệ quy vào trong đường dẫn mô-đun-con “$displaypath”"
+
+#: git-submodule.sh:1025
msgid "The --cached option cannot be used with the --files option"
msgstr "Tùy chọn --cached không thể dùng cùng với tùy chọn --files"
#. unexpected type
-#: git-submodule.sh:979
+#: git-submodule.sh:1066
#, sh-format
msgid "unexpected mode $mod_dst"
msgstr "chế độ không như mong chờ $mod_dst"
-#: git-submodule.sh:997
+#: git-submodule.sh:1086
#, sh-format
-msgid " Warn: $name doesn't contain commit $sha1_src"
-msgstr " Cảnh báo: $name không chứa lần chuyển giao (commit) $sha1_src"
+msgid " Warn: $display_name doesn't contain commit $sha1_src"
+msgstr ""
+" Cảnh báo: $display_name không chứa lần chuyển giao (commit) $sha1_src"
-#: git-submodule.sh:1000
+#: git-submodule.sh:1089
#, sh-format
-msgid " Warn: $name doesn't contain commit $sha1_dst"
-msgstr " Cảnh báo: $name không chứa lần chuyển giao (commit) $sha1_dst"
+msgid " Warn: $display_name doesn't contain commit $sha1_dst"
+msgstr ""
+" Cảnh báo: $display_name không chứa lần chuyển giao (commit) $sha1_dst"
-#: git-submodule.sh:1003
+#: git-submodule.sh:1092
#, sh-format
-msgid " Warn: $name doesn't contain commits $sha1_src and $sha1_dst"
+msgid " Warn: $display_name doesn't contain commits $sha1_src and $sha1_dst"
msgstr ""
-" Cảnh báo: $name không chứa những lần chuyển giao (commit) $sha1_src và "
-"$sha1_dst"
+" Cảnh báo: $display_name không chứa những lần chuyển giao (commit) "
+"$sha1_src và $sha1_dst"
-#: git-submodule.sh:1028
+#: git-submodule.sh:1117
msgid "blob"
msgstr "blob"
-#: git-submodule.sh:1066
+#: git-submodule.sh:1155
msgid "Submodules changed but not updated:"
msgstr "Những mô-đun-con đã bị thay đổi nhưng chưa được cập nhật:"
-#: git-submodule.sh:1068
+#: git-submodule.sh:1157
msgid "Submodule changes to be committed:"
msgstr "Những mô-đun-con thay đổi đã được chuyển giao (commit):"
-#: git-submodule.sh:1153
+#: git-submodule.sh:1242
#, sh-format
msgid "Failed to recurse into submodule path '$sm_path'"
msgstr "Gặp lỗi khi đệ quy vào trong đường dẫn mô-đun-con “$sm_path”"
-#: git-submodule.sh:1216
+#: git-submodule.sh:1306
#, sh-format
-msgid "Synchronizing submodule url for '$prefix$sm_path'"
-msgstr "Url Mô-đun-con đồng bộ hóa cho “$prefix$sm_path”"
+msgid "Synchronizing submodule url for '$displaypath'"
+msgstr "Url Mô-đun-con đồng bộ hóa cho “$displaypath”"
+
+#~ msgid " (fix conflicts and then run \"git am --resolved\")"
+#~ msgstr " (sửa các xung đột và sau đó chạy lệnh \"git am --resolved\")"
+
+#~ msgid " (all conflicts fixed: run \"git commit\")"
+#~ msgstr " (khi tất cả các xung đột đã sửa xong: chạy lệnh \"git commit\")"
+
+#~ msgid "more than %d trees given: '%s'"
+#~ msgstr "đã chỉ ra nhiều hơn %d cây (tree): “%s”"
+
+#~ msgid "You cannot combine --no-ff with --ff-only."
+#~ msgstr "Bạn không thể kết hợp --no-ff với --ff-only."
+
+#~ msgid ""
+#~ "submodule '%s' (or one of its nested submodules) uses a .git directory\n"
+#~ "(use 'rm -rf' if you really want to remove it including all of its "
+#~ "history)"
+#~ msgstr ""
+#~ "mô-đun-con “%s” (hoặc cái nằm trong các mô-đun-con) dùng thư mục .git\n"
+#~ "(dùng “rm -rf” nếu bạn thực sự muốn gỡ bỏ nó cùng với tất cả lịch sử của "
+#~ "chúng)"
+
+#~ msgid ""
+#~ "'%s' has changes staged in the index\n"
+#~ "(use --cached to keep the file, or -f to force removal)"
+#~ msgstr ""
+#~ "“%s” có các thay đổi được lưu trạng thái trong bảng mục lục\n"
+#~ "(dùng tùy chọn --cached để giữ tập tin, hoặc -f để ép buộc gỡ bỏ)"
+
+#~ msgid "show commits where no parent comes before its children"
+#~ msgstr "hiển thị các lần chuyển giao nơi mà cha mẹ đến trước con của nó"
+
+#~ msgid "show the HEAD reference"
+#~ msgstr "hiển thị tham chiếu của HEAD"
+
+#~ msgid "Unable to fetch in submodule path '$prefix$sm_path'"
+#~ msgstr ""
+#~ "Không thể lấy về (fetch) trong đường dẫn mô-đun-con “$prefix$sm_path”"
+
+#~ msgid "Failed to recurse into submodule path '$prefix$sm_path'"
+#~ msgstr "Gặp lỗi khi đệ quy vào trong đường dẫn mô-đun-con “$prefix$sm_path”"
#~ msgid "It took %.2f seconds to enumerate untracked files. 'status -uno'"
#~ msgstr "Cần %.2f giây để đếm các tập tin chưa được theo vết. “status -uno”"
msgstr ""
"Project-Id-Version: Git\n"
"Report-Msgid-Bugs-To: Git Mailing List <git@vger.kernel.org>\n"
-"POT-Creation-Date: 2013-04-30 08:25+0800\n"
-"PO-Revision-Date: 2013-04-12 09:23+0800\n"
+"POT-Creation-Date: 2013-07-26 14:19+0800\n"
+"PO-Revision-Date: 2013-08-03 14:13+0800\n"
"Last-Translator: Jiang Xin <worldhello.net@gmail.com>\n"
"Language-Team: GitHub <https://github.com/gotgit/git/>\n"
"Language: zh_CN\n"
"Content-Transfer-Encoding: 8bit\n"
"Plural-Forms: nplurals=2; plural=(n != 1);\n"
-#: advice.c:53
+#: advice.c:57
#, c-format
msgid "hint: %.*s\n"
msgstr "提示：%.*s\n"
#. * Message used both when 'git commit' fails and when
#. * other commands doing a merge do.
#.
-#: advice.c:83
+#: advice.c:87
msgid ""
"Fix them up in the work tree,\n"
"and then use 'git add/rm <file>' as\n"
msgid "archive format"
msgstr "归档格式"
-#: archive.c:324 builtin/log.c:1126
+#: archive.c:324 builtin/log.c:1173
msgid "prefix"
msgstr "前缀"
msgid "prepend prefix to each pathname in the archive"
msgstr "为归档中每个路径名加上前缀"
-#: archive.c:326 builtin/archive.c:88 builtin/blame.c:2371
-#: builtin/blame.c:2372 builtin/config.c:55 builtin/fast-export.c:665
-#: builtin/fast-export.c:667 builtin/grep.c:715 builtin/hash-object.c:77
-#: builtin/ls-files.c:490 builtin/ls-files.c:493 builtin/notes.c:536
-#: builtin/notes.c:693 builtin/read-tree.c:107 parse-options.h:149
+#: archive.c:326 builtin/archive.c:88 builtin/blame.c:2292
+#: builtin/blame.c:2293 builtin/config.c:56 builtin/fast-export.c:673
+#: builtin/fast-export.c:675 builtin/grep.c:714 builtin/hash-object.c:77
+#: builtin/ls-files.c:496 builtin/ls-files.c:499 builtin/notes.c:408
+#: builtin/notes.c:565 builtin/read-tree.c:108 parse-options.h:152
msgid "file"
msgstr "文件"
msgid "list supported archive formats"
msgstr "列出支持的归档格式"
-#: archive.c:345 builtin/archive.c:90 builtin/clone.c:86
+#: archive.c:345 builtin/archive.c:90 builtin/clone.c:85
msgid "repo"
msgstr "版本库"
msgid "retrieve the archive from remote repository <repo>"
msgstr "从远程版本库（<版本库>）提取归档文件"
-#: archive.c:347 builtin/archive.c:92 builtin/notes.c:615
+#: archive.c:347 builtin/archive.c:92 builtin/notes.c:487
msgid "command"
msgstr "命令"
msgid "Cannot force update the current branch."
msgstr "无法强制更新当前分支。"
-#: branch.c:201
+#: branch.c:216
#, c-format
msgid "Cannot setup tracking information; starting point '%s' is not a branch."
msgstr "无法设置跟踪信息；起始点 '%s' 不是一个分支。"
-#: branch.c:203
+#: branch.c:218
#, c-format
msgid "the requested upstream branch '%s' does not exist"
msgstr "请求的上游分支 '%s' 不存在"
-#: branch.c:205
+#: branch.c:220
msgid ""
"\n"
"If you are planning on basing your work on an upstream\n"
"如果您正计划推送一个能与对应远程分支建立跟踪的新的本地分支，\n"
"您可能需要使用 \"git push -u\" 推送分支并配置和上游的关联。"
-#: branch.c:250
+#: branch.c:265
#, c-format
msgid "Not a valid object name: '%s'."
msgstr "不是一个有效的对象名：'%s'。"
-#: branch.c:270
+#: branch.c:285
#, c-format
msgid "Ambiguous object name: '%s'."
msgstr "歧义的对象名：'%s'。"
-#: branch.c:275
+#: branch.c:290
#, c-format
msgid "Not a valid branch point: '%s'."
msgstr "无效的分支点：'%s'。"
-#: branch.c:281
+#: branch.c:296
msgid "Failed to lock ref for update"
msgstr "无法为更新锁定引用"
-#: branch.c:299
+#: branch.c:314
msgid "Failed to write ref"
msgstr "不能写引用"
msgid "unrecognized header: %s%s (%d)"
msgstr "未能识别的包头：%s%s (%d)"
-#: bundle.c:89 builtin/commit.c:676
+#: bundle.c:89 builtin/commit.c:683
#, c-format
msgid "could not open '%s'"
msgstr "不能打开 '%s'"
msgid "Repository lacks these prerequisite commits:"
msgstr "版本库缺少这些必备的提交："
-#: bundle.c:164 sequencer.c:651 sequencer.c:1101 builtin/log.c:300
-#: builtin/log.c:770 builtin/log.c:1344 builtin/log.c:1570 builtin/merge.c:349
-#: builtin/shortlog.c:155
+#: bundle.c:164 sequencer.c:661 sequencer.c:1111 builtin/log.c:331
+#: builtin/log.c:801 builtin/log.c:1399 builtin/log.c:1625 builtin/merge.c:364
+#: builtin/shortlog.c:156
msgid "revision walk setup failed"
msgstr "版本遍历设置失败"
msgid "rev-list died"
msgstr "rev-list 终止"
-#: bundle.c:300 builtin/log.c:1255 builtin/shortlog.c:258
+#: bundle.c:300 builtin/log.c:1310 builtin/shortlog.c:259
#, c-format
msgid "unrecognized argument: %s"
msgstr "未能识别的参数：%s"
msgid "index-pack died"
msgstr "index-pack 终止"
-#: commit.c:50
+#: commit.c:53
#, c-format
msgid "could not parse %s"
msgstr "不能解析 %s"
-#: commit.c:52
+#: commit.c:55
#, c-format
msgid "%s %s is not a commit!"
msgstr "%s %s 不是一个提交!"
msgid "memory exhausted"
msgstr "内存耗尽"
-#: connected.c:39
+#: connected.c:60
msgid "Could not run 'git rev-list'"
msgstr "不能执行 'git rev-list'"
-#: connected.c:48
+#: connected.c:80
#, c-format
msgid "failed write to rev-list: %s"
msgstr "无法写入 rev-list：%s"
-#: connected.c:56
+#: connected.c:88
#, c-format
msgid "failed to close rev-list's stdin: %s"
msgstr "无法关闭 rev-list 的标准输入：%s"
"发现配置变量 'diff.dirstat' 中的错误：\n"
"%s"
-#: diff.c:3481
+#: diff.c:3487
#, c-format
msgid ""
"Failed to parse --dirstat/-X option parameter:\n"
"无法解析 --dirstat/-X 选项的参数：\n"
"%s"
-#: diff.c:3495
+#: diff.c:3501
#, c-format
msgid "Failed to parse --submodule option parameter: '%s'"
msgstr "无法解析 --submodule 选项的参数：'%s'"
msgid "'%s': short read %s"
msgstr "'%s'：读取不完整 %s"
-#: help.c:212
+#: help.c:213
#, c-format
msgid "available git commands in '%s'"
msgstr "在 '%s' 下可用的 git 命令"
-#: help.c:219
+#: help.c:220
msgid "git commands available from elsewhere on your $PATH"
msgstr "在 $PATH 路径中的其他地方可用的 git 命令"
-#: help.c:235
+#: help.c:236
msgid "The most commonly used git commands are:"
msgstr "最常用的 git 命令有："
-#: help.c:292
+#: help.c:293
#, c-format
msgid ""
"'%s' appears to be a git command, but we were not\n"
"'%s' 像是一个 git 命令，但却无法运行。\n"
"可能是 git-%s 受损？"
-#: help.c:349
+#: help.c:350
msgid "Uh oh. Your system reports no Git commands at all."
msgstr "唉呀，您的系统中未发现 Git 命令。"
-#: help.c:371
+#: help.c:372
#, c-format
msgid ""
"WARNING: You called a Git command named '%s', which does not exist.\n"
"警告：您运行一个不存在的 Git 命令 '%s'。继续执行假定您要要运行的\n"
"是 '%s'"
-#: help.c:376
+#: help.c:377
#, c-format
msgid "in %0.1f seconds automatically..."
msgstr "在 %0.1f 秒钟后自动运行..."
-#: help.c:383
+#: help.c:384
#, c-format
msgid "git: '%s' is not a git command. See 'git --help'."
msgstr "git：'%s' 不是一个 git 命令。参见 'git --help'。"
-#: help.c:387
+#: help.c:388 help.c:447
msgid ""
"\n"
"Did you mean this?"
"\n"
"您指的是这其中的某一个么？"
+#: help.c:443
+#, c-format
+msgid "%s: %s - %s"
+msgstr "%s：%s - %s"
+
#: merge.c:56
msgid "failed to read the cache"
msgstr "无法读取缓存"
#: merge.c:110 builtin/checkout.c:365 builtin/checkout.c:566
-#: builtin/clone.c:645
+#: builtin/clone.c:656
msgid "unable to write new index file"
msgstr "无法写新的索引文件"
msgid "addinfo_cache failed for path '%s'"
msgstr "为路径 '%s' addinfo_cache 失败"
-#: merge-recursive.c:268
+#: merge-recursive.c:269
msgid "error building trees"
msgstr "无法创建树"
-#: merge-recursive.c:672
+#: merge-recursive.c:673
#, c-format
msgid "failed to create path '%s'%s"
msgstr "无法创建路径 '%s'%s"
-#: merge-recursive.c:683
+#: merge-recursive.c:684
#, c-format
msgid "Removing %s to make room for subdirectory\n"
msgstr "删除 %s 以便为子目录留出空间\n"
#. something else exists
#. .. but not some other error (who really cares what?)
-#: merge-recursive.c:697 merge-recursive.c:718
+#: merge-recursive.c:698 merge-recursive.c:719
msgid ": perhaps a D/F conflict?"
msgstr "：可能是一个目录/文件冲突？"
-#: merge-recursive.c:708
+#: merge-recursive.c:709
#, c-format
msgid "refusing to lose untracked file at '%s'"
msgstr "拒绝丢弃 '%s' 中的未跟踪文件"
-#: merge-recursive.c:748
+#: merge-recursive.c:749
#, c-format
msgid "cannot read object %s '%s'"
msgstr "不能读取对象 %s '%s'"
-#: merge-recursive.c:750
+#: merge-recursive.c:751
#, c-format
msgid "blob expected for %s '%s'"
msgstr "%s '%s' 应为数据（blob）对象"
-#: merge-recursive.c:773 builtin/clone.c:313
+#: merge-recursive.c:774 builtin/clone.c:312
#, c-format
msgid "failed to open '%s'"
msgstr "无法打开 '%s'"
-#: merge-recursive.c:781
+#: merge-recursive.c:782
#, c-format
msgid "failed to symlink '%s'"
msgstr "无法创建符号链接 '%s'"
-#: merge-recursive.c:784
+#: merge-recursive.c:785
#, c-format
msgid "do not know what to do with %06o %s '%s'"
msgstr "不知道如何处理 %06o %s '%s'"
-#: merge-recursive.c:922
+#: merge-recursive.c:923
msgid "Failed to execute internal merge"
msgstr "无法执行内部合并"
-#: merge-recursive.c:926
+#: merge-recursive.c:927
#, c-format
msgid "Unable to add %s to database"
msgstr "不能添加 %s 至对象库"
-#: merge-recursive.c:942
+#: merge-recursive.c:943
msgid "unsupported object type in the tree"
msgstr "在树中有不支持的对象类型"
-#: merge-recursive.c:1021 merge-recursive.c:1035
+#: merge-recursive.c:1022 merge-recursive.c:1036
#, c-format
msgid ""
"CONFLICT (%s/delete): %s deleted in %s and %s in %s. Version %s of %s left "
"冲突（%1$s/删除）：%2$s 在 %3$s 中被删除，在 %5$s 中被 %4$s。%7$s 在 %6$s 中"
"的版本被保留。"
-#: merge-recursive.c:1027 merge-recursive.c:1040
+#: merge-recursive.c:1028 merge-recursive.c:1041
#, c-format
msgid ""
"CONFLICT (%s/delete): %s deleted in %s and %s in %s. Version %s of %s left "
"冲突（%1$s/删除）：%2$s 在 %3$s 中被删除，在 %5$s 中被 %4$s。%7$s 在 %6$s 中"
"的版本保留于 %8$s 中。"
-#: merge-recursive.c:1081
+#: merge-recursive.c:1082
msgid "rename"
msgstr "重命名"
-#: merge-recursive.c:1081
+#: merge-recursive.c:1082
msgid "renamed"
msgstr "重命名"
-#: merge-recursive.c:1137
+#: merge-recursive.c:1138
#, c-format
msgid "%s is a directory in %s adding as %s instead"
msgstr "%s 是 %s 中的一个目录而以 %s 为名被添加"
-#: merge-recursive.c:1159
+#: merge-recursive.c:1160
#, c-format
msgid ""
"CONFLICT (rename/rename): Rename \"%s\"->\"%s\" in branch \"%s\" rename \"%s"
"冲突（重命名/重命名）：在分支 \"%3$s\" 中重命名 \"%1$s\"->\"%2$s\"，在分支 "
"\"%6$s\" 中重命名 \"%4$s\"->\"%5$s\"%7$s"
-#: merge-recursive.c:1164
+#: merge-recursive.c:1165
msgid " (left unresolved)"
msgstr "（留下未解决）"
-#: merge-recursive.c:1218
+#: merge-recursive.c:1219
#, c-format
msgid "CONFLICT (rename/rename): Rename %s->%s in %s. Rename %s->%s in %s"
msgstr ""
"冲突（重命名/重命名）：在 %3$s 中重命名 %1$s->%2$s，在 %6$s 中重命名 %4$s->"
"%5$s"
-#: merge-recursive.c:1248
+#: merge-recursive.c:1249
#, c-format
msgid "Renaming %s to %s and %s to %s instead"
msgstr "而是重命名 %s 至 %s，以及 %s 至 %s"
-#: merge-recursive.c:1447
+#: merge-recursive.c:1448
#, c-format
msgid "CONFLICT (rename/add): Rename %s->%s in %s. %s added in %s"
msgstr "冲突（重命名/添加）：在 %3$s 中重命名 %1$s->%2$s。在 %5$s 中添加 %4$s"
-#: merge-recursive.c:1457
+#: merge-recursive.c:1458
#, c-format
msgid "Adding merged %s"
msgstr "添加合并后的 %s"
-#: merge-recursive.c:1462 merge-recursive.c:1660
+#: merge-recursive.c:1463 merge-recursive.c:1661
#, c-format
msgid "Adding as %s instead"
msgstr "而是以 %s 为名添加"
-#: merge-recursive.c:1513
+#: merge-recursive.c:1514
#, c-format
msgid "cannot read object %s"
msgstr "不能读取对象 %s"
-#: merge-recursive.c:1516
+#: merge-recursive.c:1517
#, c-format
msgid "object %s is not a blob"
msgstr "对象 %s 不是一个数据（blob）对象"
-#: merge-recursive.c:1564
+#: merge-recursive.c:1565
msgid "modify"
msgstr "修改"
-#: merge-recursive.c:1564
+#: merge-recursive.c:1565
msgid "modified"
msgstr "修改"
-#: merge-recursive.c:1574
+#: merge-recursive.c:1575
msgid "content"
msgstr "内容"
-#: merge-recursive.c:1581
+#: merge-recursive.c:1582
msgid "add/add"
msgstr "添加/添加"
-#: merge-recursive.c:1615
+#: merge-recursive.c:1616
#, c-format
msgid "Skipped %s (merged same as existing)"
msgstr "略过 %s（已经做过相同合并）"
-#: merge-recursive.c:1629
+#: merge-recursive.c:1630
#, c-format
msgid "Auto-merging %s"
msgstr "自动合并 %s"
-#: merge-recursive.c:1633 git-submodule.sh:1029
+#: merge-recursive.c:1634 git-submodule.sh:1118
msgid "submodule"
msgstr "子模组"
-#: merge-recursive.c:1634
+#: merge-recursive.c:1635
#, c-format
msgid "CONFLICT (%s): Merge conflict in %s"
msgstr "冲突（%s）：合并冲突于 %s"
-#: merge-recursive.c:1724
+#: merge-recursive.c:1725
#, c-format
msgid "Removing %s"
msgstr "删除 %s"
-#: merge-recursive.c:1749
+#: merge-recursive.c:1750
msgid "file/directory"
msgstr "文件/目录"
-#: merge-recursive.c:1755
+#: merge-recursive.c:1756
msgid "directory/file"
msgstr "目录/文件"
-#: merge-recursive.c:1760
+#: merge-recursive.c:1761
#, c-format
msgid "CONFLICT (%s): There is a directory with name %s in %s. Adding %s as %s"
msgstr "冲突（%1$s）：在 %3$s 中有一个名为 %2$s 的目录。以 %5$s 为名添加 %4$s"
-#: merge-recursive.c:1770
+#: merge-recursive.c:1771
#, c-format
msgid "Adding %s"
msgstr "添加 %s"
-#: merge-recursive.c:1787
+#: merge-recursive.c:1788
msgid "Fatal merge failure, shouldn't happen."
msgstr "严重的合并错误，不应发生。"
-#: merge-recursive.c:1806
+#: merge-recursive.c:1807
msgid "Already up-to-date!"
msgstr "已经是最新的！"
-#: merge-recursive.c:1815
+#: merge-recursive.c:1816
#, c-format
msgid "merging of trees %s and %s failed"
msgstr "无法合并树 %s 和 %s"
-#: merge-recursive.c:1845
+#: merge-recursive.c:1846
#, c-format
msgid "Unprocessed path??? %s"
msgstr "未处理的路径??? %s"
-#: merge-recursive.c:1890
+#: merge-recursive.c:1891
msgid "Merging:"
msgstr "合并："
-#: merge-recursive.c:1903
+#: merge-recursive.c:1904
#, c-format
msgid "found %u common ancestor:"
msgid_plural "found %u common ancestors:"
msgstr[0] "发现 %u 个共同祖先："
msgstr[1] "发现 %u 个共同祖先："
-#: merge-recursive.c:1940
+#: merge-recursive.c:1941
msgid "merge returned no commit"
msgstr "合并未返回提交"
-#: merge-recursive.c:1997
+#: merge-recursive.c:1998
#, c-format
msgid "Could not parse object '%s'"
msgstr "不能解析对象 '%s'"
-#: merge-recursive.c:2009 builtin/merge.c:658
+#: merge-recursive.c:2010 builtin/merge.c:672
msgid "Unable to write index."
msgstr "不能写入索引。"
-#: object.c:195
+#: notes-utils.c:40
+msgid "Cannot commit uninitialized/unreferenced notes tree"
+msgstr "不能提交未初始化/未引用的注解树"
+
+#: notes-utils.c:81
+#, c-format
+msgid "Bad notes.rewriteMode value: '%s'"
+msgstr "坏的 notes.rewriteMode 值：'%s'"
+
+#: notes-utils.c:91
+#, c-format
+msgid "Refusing to rewrite notes in %s (outside of refs/notes/)"
+msgstr "拒绝向 %s（在 refs/notes/ 之外）写入注解"
+
+#. TRANSLATORS: The first %s is the name of the
+#. environment variable, the second %s is its value
+#: notes-utils.c:118
+#, c-format
+msgid "Bad %s value: '%s'"
+msgstr "坏的 %s 值：'%s'"
+
+#: object.c:204
#, c-format
msgid "unable to parse object: %s"
msgstr "不能解析对象：%s"
msgid "'%s' is beyond a symbolic link"
msgstr "'%s' 位于符号链接中"
-#: remote.c:1781
+#: remote.c:1788
#, c-format
msgid "Your branch is ahead of '%s' by %d commit.\n"
msgid_plural "Your branch is ahead of '%s' by %d commits.\n"
msgstr[0] "您的分支领先 '%s' 共 %d 个提交。\n"
msgstr[1] "您的分支领先 '%s' 共 %d 个提交。\n"
-#: remote.c:1787
+#: remote.c:1794
msgid " (use \"git push\" to publish your local commits)\n"
msgstr " （使用 \"git push\" 来发布您的本地提交）\n"
-#: remote.c:1790
+#: remote.c:1797
#, c-format
msgid "Your branch is behind '%s' by %d commit, and can be fast-forwarded.\n"
msgid_plural ""
msgstr[1] "您的分支落后 '%s' 共 %d 个提交，并且可以快进。\n"
# 译者：注意保持前导空格
-#: remote.c:1798
+#: remote.c:1805
msgid " (use \"git pull\" to update your local branch)\n"
msgstr " （使用 \"git pull\" 来更新您的本地分支）\n"
-#: remote.c:1801
+#: remote.c:1808
#, c-format
msgid ""
"Your branch and '%s' have diverged,\n"
"并且分别有 %d 和 %d 处不同的提交。\n"
# 译者：注意保持前导空格
-#: remote.c:1811
+#: remote.c:1818
msgid " (use \"git pull\" to merge the remote branch into yours)\n"
msgstr " （使用 \"git pull\" 来合并远程分支）\n"
-#: sequencer.c:206 builtin/merge.c:776 builtin/merge.c:889 builtin/merge.c:999
-#: builtin/merge.c:1009
+#: run-command.c:80
+msgid "open /dev/null failed"
+msgstr "不能打开 /dev/null"
+
+#: run-command.c:82
+#, c-format
+msgid "dup2(%d,%d) failed"
+msgstr "不能调用 dup2(%d,%d)"
+
+#: sequencer.c:206 builtin/merge.c:790 builtin/merge.c:903
+#: builtin/merge.c:1013 builtin/merge.c:1023
#, c-format
msgid "Could not open '%s' for writing"
msgstr "不能为写入打开 '%s'"
-#: sequencer.c:208 builtin/merge.c:335 builtin/merge.c:779
-#: builtin/merge.c:1001 builtin/merge.c:1014
+#: sequencer.c:208 builtin/merge.c:350 builtin/merge.c:793
+#: builtin/merge.c:1015 builtin/merge.c:1028
#, c-format
msgid "Could not write to '%s'"
msgstr "不能写入 '%s'"
"冲突解决完毕后，用 'git add <paths>' 或 'git rm <paths>'\n"
"对修正后的文件做标记，然后用 'git commit' 提交"
-#: sequencer.c:245 sequencer.c:859 sequencer.c:942
+#: sequencer.c:245 sequencer.c:869 sequencer.c:952
#, c-format
msgid "Could not write to %s"
msgstr "不能写入 %s"
msgstr "提交您的修改或保存进度后再继续。"
#. TRANSLATORS: %s will be "revert" or "cherry-pick"
-#: sequencer.c:319
+#: sequencer.c:324
#, c-format
msgid "%s: Unable to write new index file"
msgstr "%s：无法写入新索引文件"
-#: sequencer.c:350
+#: sequencer.c:355
msgid "Could not resolve HEAD commit\n"
msgstr "不能解析 HEAD 提交\n"
-#: sequencer.c:371
+#: sequencer.c:377
msgid "Unable to update cache tree\n"
msgstr "不能更新缓存\n"
-#: sequencer.c:416
+#: sequencer.c:422
#, c-format
msgid "Could not parse commit %s\n"
msgstr "不能解析提交 %s\n"
-#: sequencer.c:421
+#: sequencer.c:427
#, c-format
msgid "Could not parse parent commit %s\n"
msgstr "不能解析父提交 %s\n"
-#: sequencer.c:487
+#: sequencer.c:493
msgid "Your index file is unmerged."
msgstr "您的索引文件未完成合并。"
-#: sequencer.c:506
+#: sequencer.c:512
#, c-format
msgid "Commit %s is a merge but no -m option was given."
msgstr "提交 %s 是一个合并提交但未提供 -m 选项。"
-#: sequencer.c:514
+#: sequencer.c:520
#, c-format
msgid "Commit %s does not have parent %d"
msgstr "提交 %s 没有父提交 %d"
-#: sequencer.c:518
+#: sequencer.c:524
#, c-format
msgid "Mainline was specified but commit %s is not a merge."
msgstr "指定了主线但提交 %s 不是一个合并。"
#. TRANSLATORS: The first %s will be "revert" or
#. "cherry-pick", the second %s a SHA1
-#: sequencer.c:531
+#: sequencer.c:537
#, c-format
msgid "%s: cannot parse parent commit %s"
msgstr "%s：不能解析父提交 %s"
-#: sequencer.c:535
+#: sequencer.c:541
#, c-format
msgid "Cannot get commit message for %s"
msgstr "不能得到 %s 的提交说明"
-#: sequencer.c:621
+#: sequencer.c:627
#, c-format
msgid "could not revert %s... %s"
msgstr "不能还原 %s... %s"
-#: sequencer.c:622
+#: sequencer.c:628
#, c-format
msgid "could not apply %s... %s"
msgstr "不能应用 %s... %s"
-#: sequencer.c:654
+#: sequencer.c:664
msgid "empty commit set passed"
msgstr "提供了空的提交集"
-#: sequencer.c:662
+#: sequencer.c:672
#, c-format
msgid "git %s: failed to read the index"
msgstr "git %s：无法读取索引"
-#: sequencer.c:667
+#: sequencer.c:677
#, c-format
msgid "git %s: failed to refresh the index"
msgstr "git %s：无法刷新索引"
-#: sequencer.c:725
+#: sequencer.c:735
#, c-format
msgid "Cannot %s during a %s"
msgstr "无法 %s 在一个 %s 过程中"
-#: sequencer.c:747
+#: sequencer.c:757
#, c-format
msgid "Could not parse line %d."
msgstr "不能解析第 %d 行。"
-#: sequencer.c:752
+#: sequencer.c:762
msgid "No commits parsed."
msgstr "没有提交被解析。"
-#: sequencer.c:765
+#: sequencer.c:775
#, c-format
msgid "Could not open %s"
msgstr "不能打开 %s"
-#: sequencer.c:769
+#: sequencer.c:779
#, c-format
msgid "Could not read %s."
msgstr "不能读取 %s。"
-#: sequencer.c:776
+#: sequencer.c:786
#, c-format
msgid "Unusable instruction sheet: %s"
msgstr "无用的指令表单：%s"
-#: sequencer.c:804
+#: sequencer.c:814
#, c-format
msgid "Invalid key: %s"
msgstr "无效键名：%s"
-#: sequencer.c:807
+#: sequencer.c:817
#, c-format
msgid "Invalid value for %s: %s"
msgstr "%s 的值无效：%s"
-#: sequencer.c:819
+#: sequencer.c:829
#, c-format
msgid "Malformed options sheet: %s"
msgstr "非法的选项表单：%s"
-#: sequencer.c:840
+#: sequencer.c:850
msgid "a cherry-pick or revert is already in progress"
msgstr "一个拣选或还原操作已在进行"
-#: sequencer.c:841
+#: sequencer.c:851
msgid "try \"git cherry-pick (--continue | --quit | --abort)\""
msgstr "尝试 \"git cherry-pick (--continue | --quit | --abort)\""
-#: sequencer.c:845
+#: sequencer.c:855
#, c-format
msgid "Could not create sequencer directory %s"
msgstr "不能创建序列目录 %s"
-#: sequencer.c:861 sequencer.c:946
+#: sequencer.c:871 sequencer.c:956
#, c-format
msgid "Error wrapping up %s."
msgstr "错误收尾 %s。"
-#: sequencer.c:880 sequencer.c:1014
+#: sequencer.c:890 sequencer.c:1024
msgid "no cherry-pick or revert in progress"
msgstr "拣选或还原操作并未进行"
-#: sequencer.c:882
+#: sequencer.c:892
msgid "cannot resolve HEAD"
msgstr "不能解析 HEAD"
-#: sequencer.c:884
+#: sequencer.c:894
msgid "cannot abort from a branch yet to be born"
msgstr "不能从尚未建立的分支终止"
-#: sequencer.c:906 builtin/apply.c:4060
+#: sequencer.c:916 builtin/apply.c:4061
#, c-format
msgid "cannot open %s: %s"
msgstr "不能打开 %s：%s"
-#: sequencer.c:909
+#: sequencer.c:919
#, c-format
msgid "cannot read %s: %s"
msgstr "不能读取 %s：%s"
-#: sequencer.c:910
+#: sequencer.c:920
msgid "unexpected end of file"
msgstr "意外的文件结束"
-#: sequencer.c:916
+#: sequencer.c:926
#, c-format
msgid "stored pre-cherry-pick HEAD file '%s' is corrupt"
msgstr "保存拣选提交前的 HEAD 文件 '%s' 损坏"
-#: sequencer.c:939
+#: sequencer.c:949
#, c-format
msgid "Could not format %s."
msgstr "不能格式化 %s。"
-#: sequencer.c:1083
+#: sequencer.c:1092
#, c-format
msgid "%s: can't cherry-pick a %s"
msgstr "%s：不能拣选一个%s"
-#: sequencer.c:1085
+#: sequencer.c:1095
#, c-format
msgid "%s: bad revision"
msgstr "%s：错误的版本"
-#: sequencer.c:1119
+#: sequencer.c:1129
msgid "Can't revert as initial commit"
msgstr "不能作为初始提交还原"
-#: sequencer.c:1120
+#: sequencer.c:1130
msgid "Can't cherry-pick into empty head"
msgstr "不能拣选到空分支"
-#: sha1_name.c:1036
+#: sha1_name.c:440
+msgid ""
+"Git normally never creates a ref that ends with 40 hex characters\n"
+"because it will be ignored when you just specify 40-hex. These refs\n"
+"may be created by mistake. For example,\n"
+"\n"
+" git checkout -b $br $(git rev-parse ...)\n"
+"\n"
+"where \"$br\" is somehow empty and a 40-hex ref is created. Please\n"
+"examine these refs and maybe delete them. Turn this message off by\n"
+"running \"git config advice.object_name_warning false\""
+msgstr ""
+"Git 通常不会创建一个以40位十六进制字符命名的引用，因为当你提供40位\n"
+"十六进制字符时将被忽略。不过这些引用也可能被错误地创建。例如：\n"
+"\n"
+" git checkout -b $br $(git rev-parse ...)\n"
+"\n"
+"当 \"$br\" 空白时一个40位十六进制的引用将被创建。请检查这些引用，\n"
+"可能需要删除它们。用 \"git config advice.object_name_warning false\""
+"命令关闭本消息通知。"
+
+#: sha1_name.c:1097
msgid "HEAD does not point to a branch"
msgstr "HEAD 没有指向一个分支"
-#: sha1_name.c:1039
+#: sha1_name.c:1100
#, c-format
msgid "No such branch: '%s'"
msgstr "没有此分支：'%s'"
-#: sha1_name.c:1041
+#: sha1_name.c:1102
#, c-format
msgid "No upstream configured for branch '%s'"
msgstr "尚未给分支 '%s' 设置上游"
-#: sha1_name.c:1044
+#: sha1_name.c:1106
#, c-format
msgid "Upstream branch '%s' not stored as a remote-tracking branch"
msgstr "上游分支 '%s' 没有存储为一个远程跟踪分支"
msgid "unable to access '%s': %s"
msgstr "不能访问 '%s'：%s"
-#: wrapper.c:423
+#: wrapper.c:429
#, c-format
msgid "unable to access '%s'"
msgstr "不能访问 '%s'"
-#: wrapper.c:434
+#: wrapper.c:440
#, c-format
msgid "unable to look up current user in the passwd file: %s"
msgstr "无法在口令文件中查询到当前用户：%s"
-#: wrapper.c:435
+#: wrapper.c:441
msgid "no such user"
msgstr "无此用户"
-#: wt-status.c:140
+#: wt-status.c:141
msgid "Unmerged paths:"
msgstr "未合并的路径："
# 译者：注意保持前导空格
-#: wt-status.c:167 wt-status.c:194
+#: wt-status.c:168 wt-status.c:195
#, c-format
msgid " (use \"git reset %s <file>...\" to unstage)"
msgstr " （使用 \"git reset %s <file>...\" 撤出暂存区）"
# 译者：注意保持前导空格
-#: wt-status.c:169 wt-status.c:196
+#: wt-status.c:170 wt-status.c:197
msgid " (use \"git rm --cached <file>...\" to unstage)"
msgstr " （使用 \"git rm --cached <file>...\" 撤出暂存区）"
# 译者：注意保持前导空格
-#: wt-status.c:173
+#: wt-status.c:174
msgid " (use \"git add <file>...\" to mark resolution)"
msgstr " （使用 \"git add <file>...\" 标记解决方案）"
# 译者：注意保持前导空格
-#: wt-status.c:175 wt-status.c:179
+#: wt-status.c:176 wt-status.c:180
msgid " (use \"git add/rm <file>...\" as appropriate to mark resolution)"
msgstr " （酌情使用 \"git add/rm <file>...\" 标记解决方案）"
# 译者：注意保持前导空格
-#: wt-status.c:177
+#: wt-status.c:178
msgid " (use \"git rm <file>...\" to mark resolution)"
msgstr " （使用 \"git rm <file>...\" 标记解决方案）"
-#: wt-status.c:188
+#: wt-status.c:189
msgid "Changes to be committed:"
msgstr "要提交的变更："
-#: wt-status.c:206
+#: wt-status.c:207
msgid "Changes not staged for commit:"
msgstr "尚未暂存以备提交的变更："
# 译者：注意保持前导空格
-#: wt-status.c:210
+#: wt-status.c:211
msgid " (use \"git add <file>...\" to update what will be committed)"
msgstr " （使用 \"git add <file>...\" 更新要提交的内容）"
# 译者：注意保持前导空格
-#: wt-status.c:212
+#: wt-status.c:213
msgid " (use \"git add/rm <file>...\" to update what will be committed)"
msgstr " （使用 \"git add/rm <file>...\" 更新要提交的内容）"
# 译者：注意保持前导空格
-#: wt-status.c:213
+#: wt-status.c:214
msgid ""
" (use \"git checkout -- <file>...\" to discard changes in working directory)"
msgstr " （使用 \"git checkout -- <file>...\" 丢弃工作区的改动）"
# 译者：注意保持前导空格
-#: wt-status.c:215
+#: wt-status.c:216
msgid " (commit or discard the untracked or modified content in submodules)"
msgstr " （提交或丢弃子模组中未跟踪或修改的内容）"
# 译者：注意保持前导空格
-#: wt-status.c:227
+#: wt-status.c:228
#, c-format
msgid " (use \"git %s <file>...\" to include in what will be committed)"
msgstr " （使用 \"git %s <file>...\" 以包含要提交的内容）"
-#: wt-status.c:244
+#: wt-status.c:245
msgid "bug"
msgstr "bug"
-#: wt-status.c:249
+#: wt-status.c:250
msgid "both deleted:"
msgstr "双方删除："
-#: wt-status.c:250
+#: wt-status.c:251
msgid "added by us:"
msgstr "由我们添加："
-#: wt-status.c:251
+#: wt-status.c:252
msgid "deleted by them:"
msgstr "由他们删除："
-#: wt-status.c:252
+#: wt-status.c:253
msgid "added by them:"
msgstr "由他们添加："
-#: wt-status.c:253
+#: wt-status.c:254
msgid "deleted by us:"
msgstr "由我们删除："
-#: wt-status.c:254
+#: wt-status.c:255
msgid "both added:"
msgstr "双方添加："
-#: wt-status.c:255
+#: wt-status.c:256
msgid "both modified:"
msgstr "双方修改："
# 译者：末尾两个字节可能被删减，如果翻译为中文标点会出现半个汉字
-#: wt-status.c:285
+#: wt-status.c:286
msgid "new commits, "
msgstr "新提交, "
# 译者：末尾两个字节可能被删减，如果翻译为中文标点会出现半个汉字
-#: wt-status.c:287
+#: wt-status.c:288
msgid "modified content, "
msgstr "修改的内容, "
# 译者：末尾两个字节可能被删减，如果翻译为中文标点会出现半个汉字
-#: wt-status.c:289
+#: wt-status.c:290
msgid "untracked content, "
msgstr "未跟踪的内容, "
# 译者：为保证在输出中对齐，注意调整句中空格！
-#: wt-status.c:306
+#: wt-status.c:307
#, c-format
msgid "new file: %s"
msgstr "新文件： %s"
# 译者：为保证在输出中对齐，注意调整句中空格！
-#: wt-status.c:309
+#: wt-status.c:310
#, c-format
msgid "copied: %s -> %s"
msgstr "拷贝： %s -> %s"
# 译者：为保证在输出中对齐，注意调整句中空格！
-#: wt-status.c:312
+#: wt-status.c:313
#, c-format
msgid "deleted: %s"
msgstr "删除： %s"
# 译者：为保证在输出中对齐，注意调整句中空格！
-#: wt-status.c:315
+#: wt-status.c:316
#, c-format
msgid "modified: %s"
msgstr "修改： %s"
# 译者：为保证在输出中对齐，注意调整句中空格！
-#: wt-status.c:318
+#: wt-status.c:319
#, c-format
msgid "renamed: %s -> %s"
msgstr "重命名： %s -> %s"
# 译者：为保证在输出中对齐，注意调整句中空格！
-#: wt-status.c:321
+#: wt-status.c:322
#, c-format
msgid "typechange: %s"
msgstr "类型变更： %s"
# 译者：为保证在输出中对齐，注意调整句中空格！
-#: wt-status.c:324
+#: wt-status.c:325
#, c-format
msgid "unknown: %s"
msgstr "未知： %s"
# 译者：为保证在输出中对齐，注意调整句中空格！
-#: wt-status.c:327
+#: wt-status.c:328
#, c-format
msgid "unmerged: %s"
msgstr "未合并： %s"
-#: wt-status.c:330
+#: wt-status.c:331
#, c-format
msgid "bug: unhandled diff status %c"
msgstr "bug：未处理的差异状态 %c"
msgstr "您有尚未合并的路径。"
# 译者：注意保持前导空格
-#: wt-status.c:806 wt-status.c:958
+#: wt-status.c:806
msgid " (fix conflicts and run \"git commit\")"
msgstr " （解决冲突并运行 \"git commit\"）"
# 译者：注意保持前导空格
#: wt-status.c:829
-msgid " (fix conflicts and then run \"git am --resolved\")"
-msgstr " （解决冲突，然后运行 \"git am --resolved\"）"
+msgid " (fix conflicts and then run \"git am --continue\")"
+msgstr " （解决冲突，然后运行 \"git am --continue\"）"
# 译者：注意保持前导空格
#: wt-status.c:831
msgid "You are currently cherry-picking."
msgstr "您正在做拣选操作。"
+# 译者：注意保持前导空格
+#: wt-status.c:958
+msgid " (fix conflicts and run \"git cherry-pick --continue\")"
+msgstr " （解决冲突并运行 \"git cherry-pick --continue\"）"
+
# 译者：注意保持前导空格
#: wt-status.c:961
-msgid " (all conflicts fixed: run \"git commit\")"
-msgstr " （解决所有冲突后，执行 \"git commit\"）"
+msgid " (all conflicts fixed: run \"git cherry-pick --continue\")"
+msgstr " （所有冲突已解决：运行 \"git cherry-pick --continue\"）"
-#: wt-status.c:970
+# 译者：注意保持前导空格
+#: wt-status.c:963
+msgid " (use \"git cherry-pick --abort\" to cancel the cherry-pick operation)"
+msgstr " （使用 \"git cherry-pick --abort\" 以取消拣选操作）"
+
+#: wt-status.c:972
#, c-format
msgid "You are currently reverting commit %s."
msgstr "您正在反转提交 %s 。"
# 译者：注意保持前导空格
-#: wt-status.c:975
+#: wt-status.c:977
msgid " (fix conflicts and run \"git revert --continue\")"
msgstr " （解决冲突并运行 \"git revert --continue\"）"
# 译者：注意保持前导空格
-#: wt-status.c:978
+#: wt-status.c:980
msgid " (all conflicts fixed: run \"git revert --continue\")"
msgstr " （所有冲突已解决：运行 \"git revert --continue\"）"
# 译者：注意保持前导空格
-#: wt-status.c:980
+#: wt-status.c:982
msgid " (use \"git revert --abort\" to cancel the revert operation)"
msgstr " （使用 \"git revert --abort\" 以取消反转提交操作）"
-#: wt-status.c:991
+#: wt-status.c:993
#, c-format
msgid "You are currently bisecting, started from branch '%s'."
msgstr "您正在从分支 '%s' 开始做二分查找。"
-#: wt-status.c:995
+#: wt-status.c:997
msgid "You are currently bisecting."
msgstr "您正在做二分查找。"
# 译者：注意保持前导空格
-#: wt-status.c:998
+#: wt-status.c:1000
msgid " (use \"git bisect reset\" to get back to the original branch)"
msgstr " （使用 \"git bisect reset\" 以回到原有分支）"
msgid "On branch "
msgstr "位于分支 "
-#: wt-status.c:1184
+#: wt-status.c:1180
+msgid "rebase in progress; onto "
+msgstr "变基正在进行中；至 "
+
+#: wt-status.c:1187
msgid "HEAD detached at "
msgstr "头指针分离于 "
-#: wt-status.c:1186
+#: wt-status.c:1189
msgid "HEAD detached from "
msgstr "头指针分离自 "
-#: wt-status.c:1189
+#: wt-status.c:1192
msgid "Not currently on any branch."
msgstr "当前不在任何分支上。"
-#: wt-status.c:1206
+#: wt-status.c:1209
msgid "Initial commit"
msgstr "初始提交"
-#: wt-status.c:1220
+#: wt-status.c:1223
msgid "Untracked files"
msgstr "未跟踪的文件"
-#: wt-status.c:1222
+#: wt-status.c:1225
msgid "Ignored files"
msgstr "忽略的文件"
-#: wt-status.c:1226
+#: wt-status.c:1229
#, c-format
msgid ""
"It took %.2f seconds to enumerate untracked files. 'status -uno'\n"
"耗费了 %.2f 秒以枚举未跟踪的文件。'status -uno' 也许能提高速度，\n"
"但您需要小心不要忘了添加新文件（参见 'git help status'）。"
-#: wt-status.c:1232
+#: wt-status.c:1235
#, c-format
msgid "Untracked files not listed%s"
msgstr "未跟踪的文件没有列出%s"
# 译者：中文字符串拼接，可删除前导空格
-#: wt-status.c:1234
+#: wt-status.c:1237
msgid " (use -u option to show untracked files)"
msgstr "（使用 -u 参数显示未跟踪的文件）"
-#: wt-status.c:1240
+#: wt-status.c:1243
msgid "No changes"
msgstr "没有修改"
-#: wt-status.c:1245
+#: wt-status.c:1248
#, c-format
msgid "no changes added to commit (use \"git add\" and/or \"git commit -a\")\n"
msgstr "修改尚未加入提交（使用 \"git add\" 和/或 \"git commit -a\"）\n"
-#: wt-status.c:1248
+#: wt-status.c:1251
#, c-format
msgid "no changes added to commit\n"
msgstr "修改尚未加入提交\n"
-#: wt-status.c:1251
+#: wt-status.c:1254
#, c-format
msgid ""
"nothing added to commit but untracked files present (use \"git add\" to "
"track)\n"
msgstr "提交为空，但是存在尚未跟踪的文件（使用 \"git add\" 建立跟踪）\n"
-#: wt-status.c:1254
+#: wt-status.c:1257
#, c-format
msgid "nothing added to commit but untracked files present\n"
msgstr "提交为空，但是存在尚未跟踪的文件\n"
# 译者：中文字符串拼接，可删除前导空格
-#: wt-status.c:1257
+#: wt-status.c:1260
#, c-format
msgid "nothing to commit (create/copy files and use \"git add\" to track)\n"
msgstr "无文件要提交（创建/拷贝文件并使用 \"git add\" 建立跟踪）\n"
-#: wt-status.c:1260 wt-status.c:1265
+#: wt-status.c:1263 wt-status.c:1268
#, c-format
msgid "nothing to commit\n"
msgstr "无文件要提交\n"
# 译者：中文字符串拼接，可删除前导空格
-#: wt-status.c:1263
+#: wt-status.c:1266
#, c-format
msgid "nothing to commit (use -u to show untracked files)\n"
msgstr "无文件要提交（使用 -u 显示未跟踪的文件）\n"
# 译者：中文字符串拼接，可删除前导空格
-#: wt-status.c:1267
+#: wt-status.c:1270
#, c-format
msgid "nothing to commit, working directory clean\n"
msgstr "无文件要提交，干净的工作区\n"
-#: wt-status.c:1375
+#: wt-status.c:1378
msgid "HEAD (no branch)"
msgstr "HEAD（非分支）"
# 译者：注意保持句尾空格
-#: wt-status.c:1381
+#: wt-status.c:1384
msgid "Initial commit on "
msgstr "初始提交于 "
# 译者：注意保持句尾空格
-#: wt-status.c:1396
+#: wt-status.c:1399
msgid "behind "
msgstr "落后 "
# 译者：注意保持句尾空格
-#: wt-status.c:1399 wt-status.c:1402
+#: wt-status.c:1402 wt-status.c:1405
msgid "ahead "
msgstr "领先 "
# 译者：注意保持句尾空格
-#: wt-status.c:1404
+#: wt-status.c:1407
msgid ", behind "
msgstr "，落后 "
-#: compat/precompose_utf8.c:58 builtin/clone.c:352
+#: compat/precompose_utf8.c:58 builtin/clone.c:351
#, c-format
msgid "failed to unlink '%s'"
msgstr "无法删除 '%s'"
msgid "unexpected diff status %c"
msgstr "意外的差异状态 %c"
-#: builtin/add.c:149 builtin/commit.c:233
+#: builtin/add.c:149 builtin/commit.c:238
msgid "updating files failed"
msgstr "更新文件失败"
msgid "Unstaged changes after refreshing the index:"
msgstr "刷新索引之后尚未被暂存的变更："
-#: builtin/add.c:256 builtin/add.c:572 builtin/rm.c:275
+#: builtin/add.c:256 builtin/add.c:573 builtin/rm.c:337
#, c-format
msgid "pathspec '%s' did not match any files"
msgstr "路径 '%s' 未匹配任何文件"
msgid "Could not read the index"
msgstr "不能读取索引"
-#: builtin/add.c:349
+#: builtin/add.c:350
#, c-format
msgid "Could not open '%s' for writing."
msgstr "不能打开 '%s' 以写入。"
-#: builtin/add.c:353
+#: builtin/add.c:354
msgid "Could not write patch"
msgstr "不能生成补丁"
-#: builtin/add.c:358
+#: builtin/add.c:359
#, c-format
msgid "Could not stat '%s'"
msgstr "不能查看文件状态 '%s'"
-#: builtin/add.c:360
+#: builtin/add.c:361
msgid "Empty patch. Aborted."
msgstr "空补丁。异常终止。"
-#: builtin/add.c:366
+#: builtin/add.c:367
#, c-format
msgid "Could not apply '%s'"
msgstr "不能应用 '%s'"
-#: builtin/add.c:376
+#: builtin/add.c:377
msgid "The following paths are ignored by one of your .gitignore files:\n"
msgstr "下列路径根据您的一个 .gitignore 文件而被忽略：\n"
-#: builtin/add.c:393 builtin/clean.c:161 builtin/fetch.c:78 builtin/mv.c:63
-#: builtin/prune-packed.c:76 builtin/push.c:425 builtin/remote.c:1253
-#: builtin/rm.c:206
+#: builtin/add.c:394 builtin/clean.c:851 builtin/fetch.c:78 builtin/mv.c:63
+#: builtin/prune-packed.c:73 builtin/push.c:451 builtin/remote.c:1253
+#: builtin/rm.c:268
msgid "dry run"
msgstr "演习"
-#: builtin/add.c:394 builtin/apply.c:4409 builtin/check-ignore.c:19
-#: builtin/commit.c:1152 builtin/count-objects.c:95 builtin/fsck.c:613
-#: builtin/log.c:1518 builtin/mv.c:62 builtin/read-tree.c:112
+#: builtin/add.c:395 builtin/apply.c:4410 builtin/check-ignore.c:19
+#: builtin/commit.c:1201 builtin/count-objects.c:95 builtin/fsck.c:613
+#: builtin/log.c:1573 builtin/mv.c:62 builtin/read-tree.c:113
msgid "be verbose"
msgstr "冗长输出"
-#: builtin/add.c:396
+#: builtin/add.c:397
msgid "interactive picking"
msgstr "交互式拣选"
-#: builtin/add.c:397 builtin/checkout.c:1063 builtin/reset.c:258
+#: builtin/add.c:398 builtin/checkout.c:1073 builtin/reset.c:261
msgid "select hunks interactively"
msgstr "交互式挑选数据块"
-#: builtin/add.c:398
+#: builtin/add.c:399
msgid "edit current diff and apply"
msgstr "编辑当前差异并应用"
-#: builtin/add.c:399
+#: builtin/add.c:400
msgid "allow adding otherwise ignored files"
msgstr "允许添加忽略的文件"
-#: builtin/add.c:400
+#: builtin/add.c:401
msgid "update tracked files"
msgstr "更新已跟踪的文件"
-#: builtin/add.c:401
+#: builtin/add.c:402
msgid "record only the fact that the path will be added later"
msgstr "只记录，该路径稍后再添加"
-#: builtin/add.c:402
+#: builtin/add.c:403
msgid "add changes from all tracked and untracked files"
msgstr "添加所有改变的已跟踪文件和未跟踪文件"
#. takes no arguments
-#: builtin/add.c:405
+#: builtin/add.c:406
msgid "ignore paths removed in the working tree (same as --no-all)"
msgstr "忽略工作区中移除的路径（和 --no-all 相同）"
-#: builtin/add.c:407
+#: builtin/add.c:408
msgid "don't add, only refresh the index"
msgstr "不添加，只刷新索引"
-#: builtin/add.c:408
+#: builtin/add.c:409
msgid "just skip files which cannot be added because of errors"
msgstr "跳过因出错不能添加的文件"
-#: builtin/add.c:409
+#: builtin/add.c:410
msgid "check if - even missing - files are ignored in dry run"
msgstr "检查在演习模式下文件（即使不存在）是否被忽略"
-#: builtin/add.c:431
+#: builtin/add.c:432
#, c-format
msgid "Use -f if you really want to add them.\n"
msgstr "使用 -f 参数如果您确实要添加它们。\n"
-#: builtin/add.c:432
+#: builtin/add.c:433
msgid "no files added"
msgstr "没有文件被添加"
-#: builtin/add.c:438
+#: builtin/add.c:439
msgid "adding files failed"
msgstr "添加文件失败"
-#: builtin/add.c:477
+#: builtin/add.c:478
msgid "-A and -u are mutually incompatible"
msgstr "-A 和 -u 选项互斥"
-#: builtin/add.c:495
+#: builtin/add.c:496
msgid "Option --ignore-missing can only be used together with --dry-run"
msgstr "选项 --ignore-missing 只能和 --dry-run 同时使用"
-#: builtin/add.c:525
+#: builtin/add.c:526
#, c-format
msgid "Nothing specified, nothing added.\n"
msgstr "没有指定文件，也没有文件被添加。\n"
-#: builtin/add.c:526
+#: builtin/add.c:527
#, c-format
msgid "Maybe you wanted to say 'git add .'?\n"
msgstr "也许您想要执行 'git add .'？\n"
-#: builtin/add.c:532 builtin/check-ignore.c:66 builtin/clean.c:204
-#: builtin/commit.c:293 builtin/mv.c:82 builtin/rm.c:235
+#: builtin/add.c:533 builtin/check-ignore.c:161 builtin/clean.c:895
+#: builtin/commit.c:298 builtin/mv.c:82 builtin/rm.c:297
msgid "index file corrupt"
msgstr "索引文件损坏"
-#: builtin/add.c:604 builtin/apply.c:4505 builtin/mv.c:229 builtin/rm.c:370
+#: builtin/add.c:605 builtin/apply.c:4506 builtin/mv.c:229 builtin/rm.c:432
msgid "Unable to write new index file"
msgstr "无法写入新索引文件"
msgid "cannot checkout %s"
msgstr "不能检出 %s"
-#: builtin/apply.c:3140 builtin/apply.c:3149 builtin/apply.c:3193
+#: builtin/apply.c:3140 builtin/apply.c:3149 builtin/apply.c:3194
#, c-format
msgid "read of %s failed"
msgstr "读取 %s 失败"
-#: builtin/apply.c:3173 builtin/apply.c:3395
+#: builtin/apply.c:3174 builtin/apply.c:3396
#, c-format
msgid "path %s has been renamed/deleted"
msgstr "路径 %s 已经被重命名/删除"
-#: builtin/apply.c:3254 builtin/apply.c:3409
+#: builtin/apply.c:3255 builtin/apply.c:3410
#, c-format
msgid "%s: does not exist in index"
msgstr "%s：不存在于索引中"
-#: builtin/apply.c:3258 builtin/apply.c:3401 builtin/apply.c:3423
+#: builtin/apply.c:3259 builtin/apply.c:3402 builtin/apply.c:3424
#, c-format
msgid "%s: %s"
msgstr "%s：%s"
-#: builtin/apply.c:3263 builtin/apply.c:3417
+#: builtin/apply.c:3264 builtin/apply.c:3418
#, c-format
msgid "%s: does not match index"
msgstr "%s：和索引不匹配"
-#: builtin/apply.c:3365
+#: builtin/apply.c:3366
msgid "removal patch leaves file contents"
msgstr "移除补丁仍留下了文件内容"
-#: builtin/apply.c:3434
+#: builtin/apply.c:3435
#, c-format
msgid "%s: wrong type"
msgstr "%s：错误类型"
-#: builtin/apply.c:3436
+#: builtin/apply.c:3437
#, c-format
msgid "%s has type %o, expected %o"
msgstr "%s 的类型是 %o，应为 %o"
-#: builtin/apply.c:3537
+#: builtin/apply.c:3538
#, c-format
msgid "%s: already exists in index"
msgstr "%s：已经存在于索引中"
-#: builtin/apply.c:3540
+#: builtin/apply.c:3541
#, c-format
msgid "%s: already exists in working directory"
msgstr "%s：已经存在于工作区中"
-#: builtin/apply.c:3560
+#: builtin/apply.c:3561
#, c-format
msgid "new mode (%o) of %s does not match old mode (%o)"
msgstr "%2$s 的新模式（%1$o）和旧模式（%3$o）不匹配"
-#: builtin/apply.c:3565
+#: builtin/apply.c:3566
#, c-format
msgid "new mode (%o) of %s does not match old mode (%o) of %s"
msgstr "%2$s 的新模式（%1$o）和 %4$s 的旧模式（%3$o）不匹配"
-#: builtin/apply.c:3573
+#: builtin/apply.c:3574
#, c-format
msgid "%s: patch does not apply"
msgstr "%s：补丁未应用"
-#: builtin/apply.c:3586
+#: builtin/apply.c:3587
#, c-format
msgid "Checking patch %s..."
msgstr "检查补丁 %s..."
-#: builtin/apply.c:3679 builtin/checkout.c:216 builtin/reset.c:124
+#: builtin/apply.c:3680 builtin/checkout.c:216 builtin/reset.c:127
#, c-format
msgid "make_cache_entry failed for path '%s'"
msgstr "对路径 '%s' 的 make_cache_entry 操作失败"
-#: builtin/apply.c:3822
+#: builtin/apply.c:3823
#, c-format
msgid "unable to remove %s from index"
msgstr "不能从索引中移除 %s"
-#: builtin/apply.c:3850
+#: builtin/apply.c:3851
#, c-format
-msgid "corrupt patch for subproject %s"
-msgstr "子项目 %s 损坏的补丁"
+msgid "corrupt patch for submodule %s"
+msgstr "子模组 %s 损坏的补丁"
-#: builtin/apply.c:3854
+#: builtin/apply.c:3855
#, c-format
msgid "unable to stat newly created file '%s'"
msgstr "不能枚举新建文件 '%s' 的状态"
-#: builtin/apply.c:3859
+#: builtin/apply.c:3860
#, c-format
msgid "unable to create backing store for newly created file %s"
msgstr "不能为新建文件 %s 创建后端存储"
-#: builtin/apply.c:3862 builtin/apply.c:3970
+#: builtin/apply.c:3863 builtin/apply.c:3971
#, c-format
msgid "unable to add cache entry for %s"
msgstr "无法为 %s 添加缓存条目"
-#: builtin/apply.c:3895
+#: builtin/apply.c:3896
#, c-format
msgid "closing file '%s'"
msgstr "关闭文件 '%s'"
-#: builtin/apply.c:3944
+#: builtin/apply.c:3945
#, c-format
msgid "unable to write file '%s' mode %o"
msgstr "不能写文件 '%s' 权限 %o"
-#: builtin/apply.c:4031
+#: builtin/apply.c:4032
#, c-format
msgid "Applied patch %s cleanly."
msgstr "成功应用补丁 %s。"
-#: builtin/apply.c:4039
+#: builtin/apply.c:4040
msgid "internal error"
msgstr "内部错误"
#. Say this even without --verbose
-#: builtin/apply.c:4042
+#: builtin/apply.c:4043
#, c-format
msgid "Applying patch %%s with %d reject..."
msgid_plural "Applying patch %%s with %d rejects..."
msgstr[0] "应用 %%s 个补丁，其中 %d 个被拒绝..."
msgstr[1] "应用 %%s 个补丁，其中 %d 个被拒绝..."
-#: builtin/apply.c:4052
+#: builtin/apply.c:4053
#, c-format
msgid "truncating .rej filename to %.*s.rej"
msgstr "截短 .rej 文件名为 %.*s.rej"
-#: builtin/apply.c:4073
+#: builtin/apply.c:4074
#, c-format
msgid "Hunk #%d applied cleanly."
msgstr "第 #%d 个片段成功应用。"
-#: builtin/apply.c:4076
+#: builtin/apply.c:4077
#, c-format
msgid "Rejected hunk #%d."
msgstr "拒绝第 #%d 个片段。"
-#: builtin/apply.c:4226
+#: builtin/apply.c:4227
msgid "unrecognized input"
msgstr "未能识别的输入"
-#: builtin/apply.c:4237
+#: builtin/apply.c:4238
msgid "unable to read index file"
msgstr "无法读取索引文件"
-#: builtin/apply.c:4356 builtin/apply.c:4359 builtin/clone.c:92
+#: builtin/apply.c:4357 builtin/apply.c:4360 builtin/clone.c:91
#: builtin/fetch.c:63
msgid "path"
msgstr "路径"
-#: builtin/apply.c:4357
+#: builtin/apply.c:4358
msgid "don't apply changes matching the given path"
msgstr "不要应用与给出路径向匹配的变更"
-#: builtin/apply.c:4360
+#: builtin/apply.c:4361
msgid "apply changes matching the given path"
msgstr "应用与给出路径向匹配的变更"
-#: builtin/apply.c:4362
+#: builtin/apply.c:4363
msgid "num"
msgstr "数字"
-#: builtin/apply.c:4363
+#: builtin/apply.c:4364
msgid "remove <num> leading slashes from traditional diff paths"
msgstr "从传统的 diff 路径中移除指定数量的前导斜线"
-#: builtin/apply.c:4366
+#: builtin/apply.c:4367
msgid "ignore additions made by the patch"
msgstr "忽略补丁中的添加的文件"
-#: builtin/apply.c:4368
+#: builtin/apply.c:4369
msgid "instead of applying the patch, output diffstat for the input"
msgstr "不应用补丁，而是显示输入的差异统计（diffstat）"
-#: builtin/apply.c:4372
+#: builtin/apply.c:4373
msgid "show number of added and deleted lines in decimal notation"
msgstr "以十进制数显示添加和删除的行数"
-#: builtin/apply.c:4374
+#: builtin/apply.c:4375
msgid "instead of applying the patch, output a summary for the input"
msgstr "不应用补丁，而是显示输入的概要"
-#: builtin/apply.c:4376
+#: builtin/apply.c:4377
msgid "instead of applying the patch, see if the patch is applicable"
msgstr "不应用补丁，而是查看补丁是否可应用"
-#: builtin/apply.c:4378
+#: builtin/apply.c:4379
msgid "make sure the patch is applicable to the current index"
msgstr "确认补丁可以应用到当前索引"
-#: builtin/apply.c:4380
+#: builtin/apply.c:4381
msgid "apply a patch without touching the working tree"
msgstr "应用补丁而不修改工作区"
-#: builtin/apply.c:4382
+#: builtin/apply.c:4383
msgid "also apply the patch (use with --stat/--summary/--check)"
msgstr "还应用此补丁（与 --stat/--summary/--check 选项同时使用）"
-#: builtin/apply.c:4384
+#: builtin/apply.c:4385
msgid "attempt three-way merge if a patch does not apply"
msgstr "如果一个补丁不能应用则尝试三路合并"
-#: builtin/apply.c:4386
+#: builtin/apply.c:4387
msgid "build a temporary index based on embedded index information"
msgstr "创建一个临时索引基于嵌入的索引信息"
-#: builtin/apply.c:4388 builtin/checkout-index.c:197 builtin/ls-files.c:456
+#: builtin/apply.c:4389 builtin/checkout-index.c:197 builtin/ls-files.c:462
msgid "paths are separated with NUL character"
msgstr "路径以 NUL 字符分隔"
-#: builtin/apply.c:4391
+#: builtin/apply.c:4392
msgid "ensure at least <n> lines of context match"
msgstr "确保至少匹配 <n> 行上下文"
-#: builtin/apply.c:4392
+#: builtin/apply.c:4393
msgid "action"
msgstr "动作"
-#: builtin/apply.c:4393
+#: builtin/apply.c:4394
msgid "detect new or modified lines that have whitespace errors"
msgstr "检查新增和修改的行中间的空白字符滥用"
-#: builtin/apply.c:4396 builtin/apply.c:4399
+#: builtin/apply.c:4397 builtin/apply.c:4400
msgid "ignore changes in whitespace when finding context"
msgstr "查找上下文时忽略空白字符的变更"
-#: builtin/apply.c:4402
+#: builtin/apply.c:4403
msgid "apply the patch in reverse"
msgstr "反向应用补丁"
-#: builtin/apply.c:4404
+#: builtin/apply.c:4405
msgid "don't expect at least one line of context"
msgstr "无需至少一行上下文"
-#: builtin/apply.c:4406
+#: builtin/apply.c:4407
msgid "leave the rejected hunks in corresponding *.rej files"
msgstr "将拒绝的补丁片段保存在对应的 *.rej 文件中"
-#: builtin/apply.c:4408
+#: builtin/apply.c:4409
msgid "allow overlapping hunks"
msgstr "允许重叠的补丁片段"
-#: builtin/apply.c:4411
+#: builtin/apply.c:4412
msgid "tolerate incorrectly detected missing new-line at the end of file"
msgstr "允许不正确的文件末尾换行符"
-#: builtin/apply.c:4414
+#: builtin/apply.c:4415
msgid "do not trust the line counts in the hunk headers"
msgstr "不信任补丁片段的头信息中的行号"
-#: builtin/apply.c:4416
+#: builtin/apply.c:4417
msgid "root"
msgstr "根目录"
-#: builtin/apply.c:4417
+#: builtin/apply.c:4418
msgid "prepend <root> to all filenames"
msgstr "为所有文件名前添加 <根目录>"
-#: builtin/apply.c:4439
+#: builtin/apply.c:4440
msgid "--3way outside a repository"
msgstr "--3way 在一个版本库之外"
-#: builtin/apply.c:4447
+#: builtin/apply.c:4448
msgid "--index outside a repository"
msgstr "--index 在一个版本库之外"
-#: builtin/apply.c:4450
+#: builtin/apply.c:4451
msgid "--cached outside a repository"
msgstr "--cached 在一个版本库之外"
-#: builtin/apply.c:4466
+#: builtin/apply.c:4467
#, c-format
msgid "can't open patch '%s'"
msgstr "不能打开补丁 '%s'"
-#: builtin/apply.c:4480
+#: builtin/apply.c:4481
#, c-format
msgid "squelched %d whitespace error"
msgid_plural "squelched %d whitespace errors"
msgstr[0] "抑制下仍有 %d 个空白字符误用"
msgstr[1] "抑制下仍有 %d 个空白字符误用"
-#: builtin/apply.c:4486 builtin/apply.c:4496
+#: builtin/apply.c:4487 builtin/apply.c:4497
#, c-format
msgid "%d line adds whitespace errors."
msgid_plural "%d lines add whitespace errors."
msgid "update BISECT_HEAD instead of checking out the current commit"
msgstr "更新 BISECT_HEAD 而非检出当前提交"
-#: builtin/blame.c:25
+#: builtin/blame.c:26
msgid "git blame [options] [rev-opts] [rev] [--] file"
msgstr "git blame [选项] [版本选项] [版本] [--] 文件"
-#: builtin/blame.c:30
+#: builtin/blame.c:31
msgid "[rev-opts] are documented in git-rev-list(1)"
msgstr "[版本选项] 的文档记录在 git-rev-list(1) 中"
-#: builtin/blame.c:2355
+#: builtin/blame.c:2276
msgid "Show blame entries as we find them, incrementally"
msgstr "增量式地显示发现的 blame 条目"
-#: builtin/blame.c:2356
+#: builtin/blame.c:2277
msgid "Show blank SHA-1 for boundary commits (Default: off)"
msgstr "边界提交显示空的 SHA-1（默认：关闭）"
-#: builtin/blame.c:2357
+#: builtin/blame.c:2278
msgid "Do not treat root commits as boundaries (Default: off)"
msgstr "不把根提交作为边界（默认：关闭）"
-#: builtin/blame.c:2358
+#: builtin/blame.c:2279
msgid "Show work cost statistics"
msgstr "显示命令消耗统计"
-#: builtin/blame.c:2359
+#: builtin/blame.c:2280
msgid "Show output score for blame entries"
msgstr "显示判断 blame 条目位移的得分诊断信息"
-#: builtin/blame.c:2360
+#: builtin/blame.c:2281
msgid "Show original filename (Default: auto)"
msgstr "显示原始文件名（默认：自动）"
-#: builtin/blame.c:2361
+#: builtin/blame.c:2282
msgid "Show original linenumber (Default: off)"
msgstr "显示原始的行号（默认：关闭）"
-#: builtin/blame.c:2362
+#: builtin/blame.c:2283
msgid "Show in a format designed for machine consumption"
msgstr "显示为一个适合机器读取的格式"
-#: builtin/blame.c:2363
+#: builtin/blame.c:2284
msgid "Show porcelain format with per-line commit information"
msgstr "为每一行显示机器适用的提交信息"
-#: builtin/blame.c:2364
+#: builtin/blame.c:2285
msgid "Use the same output mode as git-annotate (Default: off)"
msgstr "使用和 git-annotate 相同的输出模式（默认：关闭）"
-#: builtin/blame.c:2365
+#: builtin/blame.c:2286
msgid "Show raw timestamp (Default: off)"
msgstr "显示原始时间戳（默认：关闭）"
-#: builtin/blame.c:2366
+#: builtin/blame.c:2287
msgid "Show long commit SHA1 (Default: off)"
msgstr "显示长的SHA1提交号（默认：关闭）"
-#: builtin/blame.c:2367
+#: builtin/blame.c:2288
msgid "Suppress author name and timestamp (Default: off)"
msgstr "隐藏作者名字和时间戳（默认：关闭）"
-#: builtin/blame.c:2368
+#: builtin/blame.c:2289
msgid "Show author email instead of name (Default: off)"
msgstr "显示作者的邮箱而不是名字（默认：关闭）"
-#: builtin/blame.c:2369
+#: builtin/blame.c:2290
msgid "Ignore whitespace differences"
msgstr "忽略空白差异"
-#: builtin/blame.c:2370
+#: builtin/blame.c:2291
msgid "Spend extra cycles to find better match"
msgstr "花费额外的循环来找到更好的匹配"
-#: builtin/blame.c:2371
+#: builtin/blame.c:2292
msgid "Use revisions from <file> instead of calling git-rev-list"
msgstr "使用来自 <file> 的修订集而不是调用 git-rev-list"
-#: builtin/blame.c:2372
+#: builtin/blame.c:2293
msgid "Use <file>'s contents as the final image"
msgstr "使用 <file> 的内容作为最终的图片"
-#: builtin/blame.c:2373 builtin/blame.c:2374
+#: builtin/blame.c:2294 builtin/blame.c:2295
msgid "score"
msgstr "得分"
-#: builtin/blame.c:2373
+#: builtin/blame.c:2294
msgid "Find line copies within and across files"
msgstr "找到文件内及跨文件的行拷贝"
-#: builtin/blame.c:2374
+#: builtin/blame.c:2295
msgid "Find line movements within and across files"
msgstr "找到文件内及跨文件的行移动"
-#: builtin/blame.c:2375
+#: builtin/blame.c:2296
msgid "n,m"
msgstr "n,m"
-#: builtin/blame.c:2375
+#: builtin/blame.c:2296
msgid "Process only line range n,m, counting from 1"
msgstr "只处理行范围在 n 和 m 之间的，从 1 开始"
msgstr "作用于远程跟踪分支"
#: builtin/branch.c:805 builtin/branch.c:811 builtin/branch.c:832
-#: builtin/branch.c:838 builtin/commit.c:1368 builtin/commit.c:1369
-#: builtin/commit.c:1370 builtin/commit.c:1371 builtin/tag.c:468
+#: builtin/branch.c:838 builtin/commit.c:1414 builtin/commit.c:1415
+#: builtin/commit.c:1416 builtin/commit.c:1417 builtin/tag.c:468
msgid "commit"
msgstr "提交"
msgid "Failed to resolve HEAD as a valid ref."
msgstr "无法将 HEAD 解析为有效引用。"
-#: builtin/branch.c:860 builtin/clone.c:619
+#: builtin/branch.c:860 builtin/clone.c:630
msgid "HEAD not found below refs/heads!"
msgstr "HEAD 没有位于 /refs/heads 之下！"
msgid "Need a repository to unbundle."
msgstr "需要一个版本库来解包。"
-#: builtin/cat-file.c:176
+#: builtin/cat-file.c:303
msgid "git cat-file (-t|-s|-e|-p|<type>|--textconv) <object>"
msgstr "git cat-file (-t|-s|-e|-p|<类型>|--textconv) <对象>"
-#: builtin/cat-file.c:177
+#: builtin/cat-file.c:304
msgid "git cat-file (--batch|--batch-check) < <list_of_objects>"
msgstr "git cat-file (--batch|--batch-check) < <对象列表>"
-#: builtin/cat-file.c:195
+#: builtin/cat-file.c:341
msgid "<type> can be one of: blob, tree, commit, tag"
msgstr "<类型> 可以是其中之一：blob、tree、commit、tag"
-#: builtin/cat-file.c:196
+#: builtin/cat-file.c:342
msgid "show object type"
msgstr "显示对象类型"
-#: builtin/cat-file.c:197
+#: builtin/cat-file.c:343
msgid "show object size"
msgstr "显示对象大小"
-#: builtin/cat-file.c:199
+#: builtin/cat-file.c:345
msgid "exit with zero when there's no error"
msgstr "当没有错误时退出并返回零"
-#: builtin/cat-file.c:200
+#: builtin/cat-file.c:346
msgid "pretty-print object's content"
msgstr "美观地打印对象的内容"
-#: builtin/cat-file.c:202
+#: builtin/cat-file.c:348
msgid "for blob objects, run textconv on object's content"
msgstr "对于数据（blob）对象，对其内容执行 textconv"
-#: builtin/cat-file.c:204
+#: builtin/cat-file.c:350
msgid "show info and content of objects fed from the standard input"
msgstr "显示从标准输入提供的对象的信息和内容"
-#: builtin/cat-file.c:207
+#: builtin/cat-file.c:353
msgid "show info about objects fed from the standard input"
msgstr "显示从标准输入提供的对象的信息"
msgid "input paths are terminated by a null character"
msgstr "输入路径以null字符终止"
-#: builtin/check-ignore.c:18 builtin/checkout.c:1044 builtin/gc.c:177
+#: builtin/check-ignore.c:18 builtin/checkout.c:1054 builtin/gc.c:177
msgid "suppress progress reporting"
msgstr "不显示进度报告"
-#: builtin/check-ignore.c:146
+#: builtin/check-ignore.c:26
+msgid "show non-matching input paths"
+msgstr "显示未匹配的输入路径"
+
+#: builtin/check-ignore.c:143
msgid "cannot specify pathnames with --stdin"
msgstr "不能同时提供路径及 --stdin 参数"
-#: builtin/check-ignore.c:149
+#: builtin/check-ignore.c:146
msgid "-z only makes sense with --stdin"
msgstr "-z 需要和 --stdin 参数共用才有意义"
-#: builtin/check-ignore.c:151
+#: builtin/check-ignore.c:148
msgid "no path specified"
msgstr "未指定路径"
-#: builtin/check-ignore.c:155
+#: builtin/check-ignore.c:152
msgid "--quiet is only valid with a single pathname"
msgstr "参数 --quiet 只在提供一个路径名时有效"
-#: builtin/check-ignore.c:157
+#: builtin/check-ignore.c:154
msgid "cannot have both --quiet and --verbose"
msgstr "不能同时提供 --quiet 和 --verbose 参数"
+#: builtin/check-ignore.c:157
+msgid "--non-matching is only valid with --verbose"
+msgstr "--non-matching 选项只在使用 --verbose 时有效"
+
+#: builtin/check-mailmap.c:8
+msgid "git check-mailmap [options] <contact>..."
+msgstr "git check-mailmap [选项] <联系地址>..."
+
+#: builtin/check-mailmap.c:13
+msgid "also read contacts from stdin"
+msgstr "还从标准输入读取联系地址"
+
+#: builtin/check-mailmap.c:24
+#, c-format
+msgid "unable to parse contact: %s"
+msgstr "不能解析联系地址：%s"
+
+#: builtin/check-mailmap.c:47
+msgid "no contacts specified"
+msgstr "未指定联系地址"
+
#: builtin/checkout-index.c:126
msgid "git checkout-index [options] [--] [<file>...]"
msgstr "git checkout-index [选项] [--] [<文件>...]"
msgid "Can not do reflog for '%s'\n"
msgstr "不能对 '%s' 执行 reflog 操作\n"
-#: builtin/checkout.c:634
+#: builtin/checkout.c:639
msgid "HEAD is now at"
msgstr "HEAD 目前位于"
-#: builtin/checkout.c:641
+#: builtin/checkout.c:646
#, c-format
msgid "Reset branch '%s'\n"
msgstr "重置分支 '%s'\n"
-#: builtin/checkout.c:644
+#: builtin/checkout.c:649
#, c-format
msgid "Already on '%s'\n"
msgstr "已经位于 '%s'\n"
-#: builtin/checkout.c:648
+#: builtin/checkout.c:653
#, c-format
msgid "Switched to and reset branch '%s'\n"
msgstr "切换并重置分支 '%s'\n"
-#: builtin/checkout.c:650 builtin/checkout.c:987
+#: builtin/checkout.c:655 builtin/checkout.c:997
#, c-format
msgid "Switched to a new branch '%s'\n"
msgstr "切换到一个新分支 '%s'\n"
-#: builtin/checkout.c:652
+#: builtin/checkout.c:657
#, c-format
msgid "Switched to branch '%s'\n"
msgstr "切换到分支 '%s'\n"
# 译者：注意保持前导空格
-#: builtin/checkout.c:708
+#: builtin/checkout.c:713
#, c-format
msgid " ... and %d more.\n"
msgstr " ... 及其它 %d 个。\n"
#. The singular version
-#: builtin/checkout.c:714
+#: builtin/checkout.c:719
#, c-format
msgid ""
"Warning: you are leaving %d commit behind, not connected to\n"
"\n"
"%s\n"
-#: builtin/checkout.c:732
+#: builtin/checkout.c:737
#, c-format
msgid ""
"If you want to keep them by creating a new branch, this may be a good time\n"
" git branch new_branch_name %s\n"
"\n"
-#: builtin/checkout.c:762
+#: builtin/checkout.c:767
msgid "internal error in revision walk"
msgstr "在版本遍历时遇到内部错误"
-#: builtin/checkout.c:766
+#: builtin/checkout.c:771
msgid "Previous HEAD position was"
msgstr "之前的 HEAD 位置是"
-#: builtin/checkout.c:793 builtin/checkout.c:982
+#: builtin/checkout.c:798 builtin/checkout.c:992
msgid "You are on a branch yet to be born"
msgstr "您位于一个尚未初始化的分支"
#. case (1)
-#: builtin/checkout.c:918
+#: builtin/checkout.c:928
#, c-format
msgid "invalid reference: %s"
msgstr "无效引用：%s"
#. case (1): want a tree
-#: builtin/checkout.c:957
+#: builtin/checkout.c:967
#, c-format
msgid "reference is not a tree: %s"
msgstr "引用不是一个树：%s"
-#: builtin/checkout.c:996
+#: builtin/checkout.c:1006
msgid "paths cannot be used with switching branches"
msgstr "路径不能和切换分支同时使用"
-#: builtin/checkout.c:999 builtin/checkout.c:1003
+#: builtin/checkout.c:1009 builtin/checkout.c:1013
#, c-format
msgid "'%s' cannot be used with switching branches"
msgstr "'%s' 不能和切换分支同时使用"
-#: builtin/checkout.c:1007 builtin/checkout.c:1010 builtin/checkout.c:1015
-#: builtin/checkout.c:1018
+#: builtin/checkout.c:1017 builtin/checkout.c:1020 builtin/checkout.c:1025
+#: builtin/checkout.c:1028
#, c-format
msgid "'%s' cannot be used with '%s'"
msgstr "'%s' 不能和 '%s' 同时使用"
-#: builtin/checkout.c:1023
+#: builtin/checkout.c:1033
#, c-format
msgid "Cannot switch branch to a non-commit '%s'"
msgstr "不能切换分支到一个非提交 '%s'"
-#: builtin/checkout.c:1045 builtin/checkout.c:1047 builtin/clone.c:90
+#: builtin/checkout.c:1055 builtin/checkout.c:1057 builtin/clone.c:89
#: builtin/remote.c:169 builtin/remote.c:171
msgid "branch"
msgstr "分支"
-#: builtin/checkout.c:1046
+#: builtin/checkout.c:1056
msgid "create and checkout a new branch"
msgstr "创建并检出一个新的分支"
-#: builtin/checkout.c:1048
+#: builtin/checkout.c:1058
msgid "create/reset and checkout a branch"
msgstr "创建/重置并检出一个分支"
-#: builtin/checkout.c:1049
+#: builtin/checkout.c:1059
msgid "create reflog for new branch"
msgstr "为新的分支创建引用日志"
-#: builtin/checkout.c:1050
+#: builtin/checkout.c:1060
msgid "detach the HEAD at named commit"
msgstr "成为指向该提交的分离头指针"
-#: builtin/checkout.c:1051
+#: builtin/checkout.c:1061
msgid "set upstream info for new branch"
msgstr "为新的分支设置上游信息"
-#: builtin/checkout.c:1053
+#: builtin/checkout.c:1063
msgid "new branch"
msgstr "新分支"
-#: builtin/checkout.c:1053
+#: builtin/checkout.c:1063
msgid "new unparented branch"
msgstr "新的没有父提交的分支"
-#: builtin/checkout.c:1054
+#: builtin/checkout.c:1064
msgid "checkout our version for unmerged files"
msgstr "对尚未合并的文件检出我们的版本"
-#: builtin/checkout.c:1056
+#: builtin/checkout.c:1066
msgid "checkout their version for unmerged files"
msgstr "对尚未合并的文件检出他们的版本"
-#: builtin/checkout.c:1058
+#: builtin/checkout.c:1068
msgid "force checkout (throw away local modifications)"
msgstr "强制检出（丢弃本地修改）"
-#: builtin/checkout.c:1059
+#: builtin/checkout.c:1069
msgid "perform a 3-way merge with the new branch"
msgstr "和新的分支执行三路合并"
-#: builtin/checkout.c:1060 builtin/merge.c:217
+#: builtin/checkout.c:1070 builtin/merge.c:232
msgid "update ignored files (default)"
msgstr "更新忽略的文件（默认）"
-#: builtin/checkout.c:1061 builtin/log.c:1158 parse-options.h:245
+#: builtin/checkout.c:1071 builtin/log.c:1208 parse-options.h:249
msgid "style"
msgstr "风格"
-#: builtin/checkout.c:1062
+#: builtin/checkout.c:1072
msgid "conflict style (merge or diff3)"
msgstr "冲突输出风格（merge 或 diff3）"
-#: builtin/checkout.c:1065
+#: builtin/checkout.c:1075
msgid "do not limit pathspecs to sparse entries only"
msgstr "对路径不做稀疏检出的限制"
-#: builtin/checkout.c:1067
+#: builtin/checkout.c:1077
msgid "second guess 'git checkout no-such-branch'"
msgstr "再者猜测'git checkout no-such-branch'"
-#: builtin/checkout.c:1091
+#: builtin/checkout.c:1101
msgid "-b, -B and --orphan are mutually exclusive"
msgstr "-b、-B 和 --orphan 是互斥的"
-#: builtin/checkout.c:1108
+#: builtin/checkout.c:1118
msgid "--track needs a branch name"
msgstr "--track 需要一个分支名"
-#: builtin/checkout.c:1115
+#: builtin/checkout.c:1125
msgid "Missing branch name; try -b"
msgstr "缺少分支名；尝试 -b"
-#: builtin/checkout.c:1150
+#: builtin/checkout.c:1160
msgid "invalid path specification"
msgstr "无效的路径规格"
-#: builtin/checkout.c:1157
+#: builtin/checkout.c:1167
#, c-format
msgid ""
"Cannot update paths and switch to branch '%s' at the same time.\n"
"不能同时更新路径并切换到分支'%s'。\n"
"您是想要检出 '%s' 但其未能解析为提交么？"
-#: builtin/checkout.c:1162
+#: builtin/checkout.c:1172
#, c-format
msgid "git checkout: --detach does not take a path argument '%s'"
msgstr "git checkout：--detach 不能接收路径参数 '%s'"
-#: builtin/checkout.c:1166
+#: builtin/checkout.c:1176
msgid ""
"git checkout: --ours/--theirs, --force and --merge are incompatible when\n"
"checking out of the index."
msgstr ""
"git checkout：在从索引检出时，--ours/--theirs、--force 和 --merge 不兼容。"
-#: builtin/clean.c:20
-msgid "git clean [-d] [-f] [-n] [-q] [-e <pattern>] [-x | -X] [--] <paths>..."
-msgstr "git clean [-d] [-f] [-n] [-q] [-e <模式>] [-x | -X] [--] <路径>..."
+#: builtin/clean.c:25
+msgid ""
+"git clean [-d] [-f] [-i] [-n] [-q] [-e <pattern>] [-x | -X] [--] <paths>..."
+msgstr ""
+"git clean [-d] [-f] [-i] [-n] [-q] [-e <模式>] [-x | -X] [--] <路径>..."
-#: builtin/clean.c:24
+#: builtin/clean.c:29
#, c-format
msgid "Removing %s\n"
msgstr "正删除 %s\n"
-#: builtin/clean.c:25
+#: builtin/clean.c:30
#, c-format
msgid "Would remove %s\n"
msgstr "将删除 %s\n"
-#: builtin/clean.c:26
+#: builtin/clean.c:31
#, c-format
msgid "Skipping repository %s\n"
msgstr "忽略版本库 %s\n"
-#: builtin/clean.c:27
+#: builtin/clean.c:32
#, c-format
msgid "Would skip repository %s\n"
msgstr "将忽略版本库 %s\n"
-#: builtin/clean.c:28
+#: builtin/clean.c:33
#, c-format
msgid "failed to remove %s"
msgstr "无法删除 %s"
-#: builtin/clean.c:160
+#: builtin/clean.c:293
+msgid ""
+"Prompt help:\n"
+"1 - select a numbered item\n"
+"foo - select item based on unique prefix\n"
+" - (empty) select nothing"
+msgstr ""
+"帮助：\n"
+"1 - 通过编号选择一个选项\n"
+"foo - 通过标题选择一个选项\n"
+" - （空）什么也不选择"
+
+#: builtin/clean.c:297
+msgid ""
+"Prompt help:\n"
+"1 - select a single item\n"
+"3-5 - select a range of items\n"
+"2-3,6-9 - select multiple ranges\n"
+"foo - select item based on unique prefix\n"
+"-... - unselect specified items\n"
+"* - choose all items\n"
+" - (empty) finish selecting"
+msgstr ""
+"帮助：\n"
+"1 - 选择一个选项\n"
+"3-5 - 选择一个范围内的所有选项\n"
+"2-3,6-9 - 选择多个范围内的所有选项\n"
+"foo - 通过标题选择一个选项\n"
+"-... - 反选特定的选项\n"
+"* - 选择所有选项\n"
+" - （空）结束选择"
+
+#: builtin/clean.c:491
+#, c-format
+msgid "Huh (%s)?"
+msgstr "嗯（%s）？"
+
+#: builtin/clean.c:634
+#, c-format
+msgid "Input ignore patterns>> "
+msgstr "输入模版以排除条目>> "
+
+#: builtin/clean.c:671
+#, c-format
+msgid "WARNING: Cannot find items matched by: %s"
+msgstr "警告：无法找到和 %s 匹配的条目"
+
+#: builtin/clean.c:692
+msgid "Select items to delete"
+msgstr "选择要删除的条目"
+
+#: builtin/clean.c:732
+#, c-format
+msgid "remove %s? "
+msgstr "删除 %s？"
+
+#: builtin/clean.c:757
+msgid "Bye."
+msgstr "再见。"
+
+#: builtin/clean.c:765
+msgid ""
+"clean - start cleaning\n"
+"filter by pattern - exclude items from deletion\n"
+"select by numbers - select items to be deleted by numbers\n"
+"ask each - confirm each deletion (like \"rm -i\")\n"
+"quit - stop cleaning\n"
+"help - this screen\n"
+"? - help for prompt selection"
+msgstr ""
+"clean - 开始清理\n"
+"filter by pattern - 通过模版排除要删除的条目\n"
+"select by numbers - 通过数字选择要删除的条目\n"
+"ask each - 针对删除逐一询问（就像 \"rm -i\"）\n"
+"quit - 停止删除并退出\n"
+"help - 显示本帮助\n"
+"? - 显示如何在提示符下选择的帮助"
+
+#: builtin/clean.c:792
+msgid "*** Commands ***"
+msgstr "*** 命令 ***"
+
+#: builtin/clean.c:793
+msgid "What now"
+msgstr "请选择"
+
+#: builtin/clean.c:801
+msgid "Would remove the following item:"
+msgid_plural "Would remove the following items:"
+msgstr[0] "将删除如下条目："
+msgstr[1] "将删除如下条目："
+
+#: builtin/clean.c:818
+msgid "No more files to clean, exiting."
+msgstr "没有要清理的文件，退出。"
+
+#: builtin/clean.c:850
msgid "do not print names of files removed"
msgstr "不打印删除文件的名称"
-#: builtin/clean.c:162
+#: builtin/clean.c:852
msgid "force"
msgstr "强制"
-#: builtin/clean.c:164
+#: builtin/clean.c:853
+msgid "interactive cleaning"
+msgstr "交互式清除"
+
+#: builtin/clean.c:855
msgid "remove whole directories"
msgstr "删除整个目录"
-#: builtin/clean.c:165 builtin/describe.c:412 builtin/grep.c:717
-#: builtin/ls-files.c:487 builtin/name-rev.c:231 builtin/show-ref.c:182
+#: builtin/clean.c:856 builtin/describe.c:420 builtin/grep.c:716
+#: builtin/ls-files.c:493 builtin/name-rev.c:315 builtin/show-ref.c:186
msgid "pattern"
msgstr "模式"
-#: builtin/clean.c:166
+#: builtin/clean.c:857
msgid "add <pattern> to ignore rules"
msgstr "添加<模式>到忽略规则"
-#: builtin/clean.c:167
+#: builtin/clean.c:858
msgid "remove ignored files, too"
msgstr "也删除忽略的文件"
-#: builtin/clean.c:169
+#: builtin/clean.c:860
msgid "remove only ignored files"
msgstr "只删除忽略的文件"
-#: builtin/clean.c:187
+#: builtin/clean.c:878
msgid "-x and -X cannot be used together"
msgstr "-x 和 -X 不能同时使用"
-#: builtin/clean.c:191
+#: builtin/clean.c:882
msgid ""
-"clean.requireForce set to true and neither -n nor -f given; refusing to clean"
+"clean.requireForce set to true and neither -i, -n nor -f given; refusing to "
+"clean"
msgstr ""
-"clean.requireForce 设置为 true 且未提供 -n 或 -f 选项，拒绝执行清理动作"
+"clean.requireForce 设置为 true 且未提供 -i、-n 或 -f 选项，拒绝执行清理动作"
-#: builtin/clean.c:194
+#: builtin/clean.c:885
msgid ""
-"clean.requireForce defaults to true and neither -n nor -f given; refusing to "
-"clean"
+"clean.requireForce defaults to true and neither -i, -n nor -f given; "
+"refusing to clean"
msgstr ""
-"clean.requireForce 默认为 true 且未提供 -n 或 -f 选项，拒绝执行清理动作"
+"clean.requireForce 默认为 true 且未提供 -i、-n 或 -f 选项，拒绝执行清理动作"
-#: builtin/clone.c:37
+#: builtin/clone.c:36
msgid "git clone [options] [--] <repo> [<dir>]"
msgstr "git clone [选项] [--] <版本库> [<路径>]"
-#: builtin/clone.c:65 builtin/fetch.c:82 builtin/merge.c:214
-#: builtin/push.c:436
+#: builtin/clone.c:64 builtin/fetch.c:82 builtin/merge.c:229
+#: builtin/push.c:462
msgid "force progress reporting"
msgstr "强制显示进度报告"
-#: builtin/clone.c:67
+#: builtin/clone.c:66
msgid "don't create a checkout"
msgstr "不创建一个检出"
-#: builtin/clone.c:68 builtin/clone.c:70 builtin/init-db.c:488
+#: builtin/clone.c:67 builtin/clone.c:69 builtin/init-db.c:488
msgid "create a bare repository"
msgstr "创建一个裸版本库"
-#: builtin/clone.c:73
+#: builtin/clone.c:72
msgid "create a mirror repository (implies bare)"
msgstr "创建一个镜像版本库（也是裸版本库）"
-#: builtin/clone.c:75
+#: builtin/clone.c:74
msgid "to clone from a local repository"
msgstr "从本地版本库克隆"
-#: builtin/clone.c:77
+#: builtin/clone.c:76
msgid "don't use local hardlinks, always copy"
msgstr "不使用本地硬链接，始终复制"
-#: builtin/clone.c:79
+#: builtin/clone.c:78
msgid "setup as shared repository"
msgstr "设置为共享版本库"
-#: builtin/clone.c:81 builtin/clone.c:83
+#: builtin/clone.c:80 builtin/clone.c:82
msgid "initialize submodules in the clone"
msgstr "在克隆时初始化子模组"
-#: builtin/clone.c:84 builtin/init-db.c:485
+#: builtin/clone.c:83 builtin/init-db.c:485
msgid "template-directory"
msgstr "模板目录"
-#: builtin/clone.c:85 builtin/init-db.c:486
+#: builtin/clone.c:84 builtin/init-db.c:486
msgid "directory from which templates will be used"
msgstr "模板目录将被使用"
-#: builtin/clone.c:87
+#: builtin/clone.c:86
msgid "reference repository"
msgstr "引用版本库"
-#: builtin/clone.c:88 builtin/column.c:26 builtin/merge-file.c:44
+#: builtin/clone.c:87 builtin/column.c:26 builtin/merge-file.c:44
msgid "name"
msgstr "名称"
-#: builtin/clone.c:89
+#: builtin/clone.c:88
msgid "use <name> instead of 'origin' to track upstream"
msgstr "使用<名称>而不是 'origin' 去跟踪上游"
-#: builtin/clone.c:91
+#: builtin/clone.c:90
msgid "checkout <branch> instead of the remote's HEAD"
msgstr "检出<分支>而不是远程HEAD"
-#: builtin/clone.c:93
+#: builtin/clone.c:92
msgid "path to git-upload-pack on the remote"
msgstr "远程 git-upload-pack 路径"
-#: builtin/clone.c:94 builtin/fetch.c:83 builtin/grep.c:662
+#: builtin/clone.c:93 builtin/fetch.c:83 builtin/grep.c:661
msgid "depth"
msgstr "深度"
-#: builtin/clone.c:95
+#: builtin/clone.c:94
msgid "create a shallow clone of that depth"
msgstr "创建一个指定深度的浅克隆"
-#: builtin/clone.c:97
+#: builtin/clone.c:96
msgid "clone only one branch, HEAD or --branch"
msgstr "只克隆一个分支、HEAD 或 --branch"
-#: builtin/clone.c:98 builtin/init-db.c:494
+#: builtin/clone.c:97 builtin/init-db.c:494
msgid "gitdir"
msgstr "git目录"
-#: builtin/clone.c:99 builtin/init-db.c:495
+#: builtin/clone.c:98 builtin/init-db.c:495
msgid "separate git dir from working tree"
msgstr "git目录和工作区分离"
-#: builtin/clone.c:100
+#: builtin/clone.c:99
msgid "key=value"
msgstr "key=value"
-#: builtin/clone.c:101
+#: builtin/clone.c:100
msgid "set config inside the new repository"
msgstr "在新版本库中设置配置信息"
-#: builtin/clone.c:254
+#: builtin/clone.c:253
#, c-format
msgid "reference repository '%s' is not a local repository."
msgstr "引用版本库 '%s' 不是一个本地版本库。"
-#: builtin/clone.c:317
+#: builtin/clone.c:316
#, c-format
msgid "failed to create directory '%s'"
msgstr "无法创建目录 '%s'"
-#: builtin/clone.c:319 builtin/diff.c:77
+#: builtin/clone.c:318 builtin/diff.c:77
#, c-format
msgid "failed to stat '%s'"
msgstr "无法枚举 '%s' 状态"
-#: builtin/clone.c:321
+#: builtin/clone.c:320
#, c-format
msgid "%s exists and is not a directory"
msgstr "%s 存在且不是一个目录"
-#: builtin/clone.c:335
+#: builtin/clone.c:334
#, c-format
msgid "failed to stat %s\n"
msgstr "无法枚举 %s 状态\n"
-#: builtin/clone.c:357
+#: builtin/clone.c:356
#, c-format
msgid "failed to create link '%s'"
msgstr "无法创建链接 '%s'"
-#: builtin/clone.c:361
+#: builtin/clone.c:360
#, c-format
msgid "failed to copy file to '%s'"
msgstr "无法拷贝文件至 '%s'"
-#: builtin/clone.c:384
+#: builtin/clone.c:383
#, c-format
msgid "done.\n"
msgstr "完成。\n"
-#: builtin/clone.c:397
+#: builtin/clone.c:396
msgid ""
"Clone succeeded, but checkout failed.\n"
"You can inspect what was checked out with 'git status'\n"
"您可以通过 'git status' 检查哪些已被检出，然后使用命令\n"
"'git checkout -f HEAD' 重试\n"
-#: builtin/clone.c:476
+#: builtin/clone.c:475
#, c-format
msgid "Could not find remote branch %s to clone."
msgstr "不能发现要克隆的远程分支 %s。"
-#: builtin/clone.c:550
+#: builtin/clone.c:555
+#, c-format
+msgid "Checking connectivity... "
+msgstr "检查连接... "
+
+#: builtin/clone.c:558
msgid "remote did not send all necessary objects"
msgstr "远程没有发送所有必须的对象"
-#: builtin/clone.c:610
+#: builtin/clone.c:560
+#, c-format
+msgid "done\n"
+msgstr "完成\n"
+
+#: builtin/clone.c:621
msgid "remote HEAD refers to nonexistent ref, unable to checkout.\n"
msgstr "远程 HEAD 指向一个不存在的引用，无法检出。\n"
-#: builtin/clone.c:641
+#: builtin/clone.c:652
msgid "unable to checkout working tree"
msgstr "不能检出工作区"
-#: builtin/clone.c:749
+#: builtin/clone.c:760
msgid "Too many arguments."
msgstr "太多参数。"
-#: builtin/clone.c:753
+#: builtin/clone.c:764
msgid "You must specify a repository to clone."
msgstr "您必须指定一个版本库来克隆。"
-#: builtin/clone.c:764
+#: builtin/clone.c:775
#, c-format
msgid "--bare and --origin %s options are incompatible."
msgstr "--bare 和 --origin %s 选项不兼容。"
-#: builtin/clone.c:767
+#: builtin/clone.c:778
msgid "--bare and --separate-git-dir are incompatible."
msgstr "--bare 和 --separate-git-dir 选项不兼容。"
-#: builtin/clone.c:780
+#: builtin/clone.c:791
#, c-format
msgid "repository '%s' does not exist"
msgstr "版本库 '%s' 不存在"
-#: builtin/clone.c:785
+#: builtin/clone.c:796
msgid "--depth is ignored in local clones; use file:// instead."
msgstr "--depth 在本地克隆被忽略，改为 file:// 协议试试。"
-#: builtin/clone.c:795
+#: builtin/clone.c:798
+msgid "--local is ignored"
+msgstr "--local 被忽略"
+
+#: builtin/clone.c:808
#, c-format
msgid "destination path '%s' already exists and is not an empty directory."
msgstr "目标路径 '%s' 已经存在，并且不是一个空目录。"
-#: builtin/clone.c:805
+#: builtin/clone.c:818
#, c-format
msgid "working tree '%s' already exists."
msgstr "工作区 '%s' 已经存在。"
-#: builtin/clone.c:818 builtin/clone.c:830
+#: builtin/clone.c:831 builtin/clone.c:843
#, c-format
msgid "could not create leading directories of '%s'"
msgstr "不能为 '%s' 创建先导目录"
-#: builtin/clone.c:821
+#: builtin/clone.c:834
#, c-format
msgid "could not create work tree dir '%s'."
msgstr "不能为 '%s' 创建工作区目录。"
-#: builtin/clone.c:840
+#: builtin/clone.c:853
#, c-format
msgid "Cloning into bare repository '%s'...\n"
msgstr "克隆到裸版本库 '%s'...\n"
-#: builtin/clone.c:842
+#: builtin/clone.c:855
#, c-format
msgid "Cloning into '%s'...\n"
msgstr "正克隆到 '%s'...\n"
-#: builtin/clone.c:877
+#: builtin/clone.c:890
#, c-format
msgid "Don't know how to clone %s"
msgstr "不知道如何克隆 %s"
-#: builtin/clone.c:926
+#: builtin/clone.c:942
#, c-format
msgid "Remote branch %s not found in upstream %s"
msgstr "远程分支 %s 在上游 %s 未发现"
-#: builtin/clone.c:933
+#: builtin/clone.c:949
msgid "You appear to have cloned an empty repository."
msgstr "您似乎克隆了一个空版本库。"
msgid "--command must be the first argument"
msgstr "--command 必须是第一个参数"
-#: builtin/commit.c:34
+#: builtin/commit.c:35
msgid "git commit [options] [--] <pathspec>..."
msgstr "git commit [选项] [--] <路径匹配>..."
-#: builtin/commit.c:39
+#: builtin/commit.c:40
msgid "git status [options] [--] <pathspec>..."
msgstr "git status [选项] [--] <路径匹配>..."
-#: builtin/commit.c:44
+#: builtin/commit.c:45
msgid ""
"Your name and email address were configured automatically based\n"
"on your username and hostname. Please check that they are accurate.\n"
"\n"
" git commit --amend --reset-author\n"
-#: builtin/commit.c:56
+#: builtin/commit.c:57
msgid ""
"You asked to amend the most recent commit, but doing so would make\n"
"it empty. You can repeat your command with --allow-empty, or you can\n"
"您要修补最近的提交，但这么做会让它成为空提交。您可以重复您的命令并带上\n"
"--allow-empty 选项，或者您可用命令 \"git reset HEAD^\" 整个删除该提交。\n"
-#: builtin/commit.c:61
+#: builtin/commit.c:62
msgid ""
"The previous cherry-pick is now empty, possibly due to conflict resolution.\n"
"If you wish to commit it anyway, use:\n"
"\n"
"否则，请使用命令 'git reset'\n"
-#: builtin/commit.c:260
+#: builtin/commit.c:265
msgid "failed to unpack HEAD tree object"
msgstr "无法解包 HEAD 树对象"
-#: builtin/commit.c:302
+#: builtin/commit.c:307
msgid "unable to create temporary index"
msgstr "不能创建临时索引"
-#: builtin/commit.c:308
+#: builtin/commit.c:313
msgid "interactive add failed"
msgstr "交互式添加失败"
-#: builtin/commit.c:341 builtin/commit.c:362 builtin/commit.c:412
+#: builtin/commit.c:346 builtin/commit.c:367 builtin/commit.c:417
msgid "unable to write new_index file"
msgstr "无法写 new_index 文件"
-#: builtin/commit.c:393
+#: builtin/commit.c:398
msgid "cannot do a partial commit during a merge."
msgstr "在合并过程中不能做部分提交。"
-#: builtin/commit.c:395
+#: builtin/commit.c:400
msgid "cannot do a partial commit during a cherry-pick."
msgstr "在拣选过程中不能做部分提交。"
-#: builtin/commit.c:405
+#: builtin/commit.c:410
msgid "cannot read the index"
msgstr "无法读取索引"
-#: builtin/commit.c:425
+#: builtin/commit.c:430
msgid "unable to write temporary index file"
msgstr "无法写临时索引文件"
-#: builtin/commit.c:513 builtin/commit.c:519
+#: builtin/commit.c:521 builtin/commit.c:527
#, c-format
msgid "invalid commit: %s"
msgstr "无效的提交：%s"
-#: builtin/commit.c:542
+#: builtin/commit.c:549
msgid "malformed --author parameter"
msgstr "非法的 --author 参数"
-#: builtin/commit.c:562
+#: builtin/commit.c:569
#, c-format
msgid "Malformed ident string: '%s'"
msgstr "非法的身份字符串：'%s'"
-#: builtin/commit.c:600 builtin/commit.c:633 builtin/commit.c:956
+#: builtin/commit.c:607 builtin/commit.c:640 builtin/commit.c:963
#, c-format
msgid "could not lookup commit %s"
msgstr "不能查询提交 %s"
-#: builtin/commit.c:612 builtin/shortlog.c:270
+#: builtin/commit.c:619 builtin/shortlog.c:271
#, c-format
msgid "(reading log message from standard input)\n"
msgstr "（正从标准输入中读取日志信息）\n"
-#: builtin/commit.c:614
+#: builtin/commit.c:621
msgid "could not read log from standard input"
msgstr "不能从标准输入中读取日志信息"
-#: builtin/commit.c:618
+#: builtin/commit.c:625
#, c-format
msgid "could not read log file '%s'"
msgstr "不能读取日志文件 '%s'"
-#: builtin/commit.c:624
+#: builtin/commit.c:631
msgid "commit has empty message"
msgstr "提交说明为空"
-#: builtin/commit.c:640
+#: builtin/commit.c:647
msgid "could not read MERGE_MSG"
msgstr "不能读取 MERGE_MSG"
-#: builtin/commit.c:644
+#: builtin/commit.c:651
msgid "could not read SQUASH_MSG"
msgstr "不能读取 SQUASH_MSG"
-#: builtin/commit.c:648
+#: builtin/commit.c:655
#, c-format
msgid "could not read '%s'"
msgstr "不能读取 '%s'"
-#: builtin/commit.c:709
+#: builtin/commit.c:716
msgid "could not write commit template"
msgstr "不能写提交模版"
-#: builtin/commit.c:720
+#: builtin/commit.c:727
#, c-format
msgid ""
"\n"
"\t%s\n"
"然后重试。\n"
-#: builtin/commit.c:725
+#: builtin/commit.c:732
#, c-format
msgid ""
"\n"
"\t%s\n"
"然后重试。\n"
-#: builtin/commit.c:737
+#: builtin/commit.c:744
#, c-format
msgid ""
"Please enter the commit message for your changes. Lines starting\n"
"请为您的变更输入提交说明。以 '%c' 开始的行将被忽略，而一个空的提交\n"
"说明将会终止提交。\n"
-#: builtin/commit.c:742
+#: builtin/commit.c:749
#, c-format
msgid ""
"Please enter the commit message for your changes. Lines starting\n"
"也可以删除它们。一个空的提交说明将会终止提交。\n"
# 译者：为保证在输出中对齐，注意调整句中空格！
-#: builtin/commit.c:755
+#: builtin/commit.c:762
#, c-format
msgid "%sAuthor: %s"
msgstr "%s作者： %s"
# 译者：为保证在输出中对齐，注意调整句中空格！
-#: builtin/commit.c:762
+#: builtin/commit.c:769
#, c-format
msgid "%sCommitter: %s"
msgstr "%s提交者： %s"
-#: builtin/commit.c:782
+#: builtin/commit.c:789
msgid "Cannot read index"
msgstr "无法读取索引"
-#: builtin/commit.c:819
+#: builtin/commit.c:826
msgid "Error building trees"
msgstr "无法创建树对象"
-#: builtin/commit.c:834 builtin/tag.c:359
+#: builtin/commit.c:841 builtin/tag.c:359
#, c-format
msgid "Please supply the message using either -m or -F option.\n"
msgstr "请使用 -m 或 -F 选项提供提交说明。\n"
-#: builtin/commit.c:931
+#: builtin/commit.c:938
#, c-format
msgid "No existing author found with '%s'"
msgstr "没有找到匹配 '%s' 的作者"
-#: builtin/commit.c:946 builtin/commit.c:1140
+#: builtin/commit.c:953 builtin/commit.c:1189
#, c-format
msgid "Invalid untracked files mode '%s'"
msgstr "无效的未追踪文件参数 '%s'"
-#: builtin/commit.c:976
+#: builtin/commit.c:990
+msgid "--long and -z are incompatible"
+msgstr "--long 和 -z 选项不兼容"
+
+#: builtin/commit.c:1020
msgid "Using both --reset-author and --author does not make sense"
msgstr "同时使用 --reset-author 和 --author 没有意义"
-#: builtin/commit.c:987
+#: builtin/commit.c:1031
msgid "You have nothing to amend."
msgstr "您没有可修补的提交。"
-#: builtin/commit.c:990
+#: builtin/commit.c:1034
msgid "You are in the middle of a merge -- cannot amend."
msgstr "您正处于一个合并过程中 -- 无法修补提交。"
-#: builtin/commit.c:992
+#: builtin/commit.c:1036
msgid "You are in the middle of a cherry-pick -- cannot amend."
msgstr "您正处于一个拣选过程中 -- 无法修补提交。"
-#: builtin/commit.c:995
+#: builtin/commit.c:1039
msgid "Options --squash and --fixup cannot be used together"
msgstr "选项 --squash 和 --fixup 不能同时使用"
-#: builtin/commit.c:1005
+#: builtin/commit.c:1049
msgid "Only one of -c/-C/-F/--fixup can be used."
msgstr "只能用一个 -c/-C/-F/--fixup 选项。"
-#: builtin/commit.c:1007
+#: builtin/commit.c:1051
msgid "Option -m cannot be combined with -c/-C/-F/--fixup."
msgstr "选项 -m 不能和 -c/-C/-F/--fixup 同时使用。"
-#: builtin/commit.c:1015
+#: builtin/commit.c:1059
msgid "--reset-author can be used only with -C, -c or --amend."
msgstr "--reset-author 只能和 -C、-c 或 --amend 同时使用。"
-#: builtin/commit.c:1032
+#: builtin/commit.c:1076
msgid "Only one of --include/--only/--all/--interactive/--patch can be used."
msgstr "只能用一个 --include/--only/--all/--interactive/--patch 选项。"
-#: builtin/commit.c:1034
+#: builtin/commit.c:1078
msgid "No paths with --include/--only does not make sense."
msgstr "参数 --include/--only 不跟路径没有意义。"
-#: builtin/commit.c:1036
+#: builtin/commit.c:1080
msgid "Clever... amending the last one with dirty index."
msgstr "聪明... 在索引不干净下修补最后的提交。"
-#: builtin/commit.c:1038
+#: builtin/commit.c:1082
msgid "Explicit paths specified without -i nor -o; assuming --only paths..."
msgstr "指定了明确的路径而没有使用 -i 或 -o 选项；认为是 --only paths..."
-#: builtin/commit.c:1048 builtin/tag.c:575
+#: builtin/commit.c:1092 builtin/tag.c:575
#, c-format
msgid "Invalid cleanup mode %s"
msgstr "无效的清理模式 %s"
-#: builtin/commit.c:1053
+#: builtin/commit.c:1097
msgid "Paths with -a does not make sense."
msgstr "路径和 -a 选项同时使用没有意义。"
-#: builtin/commit.c:1059 builtin/commit.c:1194
-msgid "--long and -z are incompatible"
-msgstr "--long 和 -z 选项不兼容"
-
-#: builtin/commit.c:1154 builtin/commit.c:1390
+#: builtin/commit.c:1203 builtin/commit.c:1436
msgid "show status concisely"
msgstr "以简洁的格式显示状态"
-#: builtin/commit.c:1156 builtin/commit.c:1392
+#: builtin/commit.c:1205 builtin/commit.c:1438
msgid "show branch information"
msgstr "显示分支信息"
-#: builtin/commit.c:1158 builtin/commit.c:1394 builtin/push.c:426
+#: builtin/commit.c:1207 builtin/commit.c:1440 builtin/push.c:452
msgid "machine-readable output"
msgstr "机器可读的输出"
-#: builtin/commit.c:1161 builtin/commit.c:1396
+#: builtin/commit.c:1210 builtin/commit.c:1442
msgid "show status in long format (default)"
msgstr "以长格式显示状态（默认）"
-#: builtin/commit.c:1164 builtin/commit.c:1399
+#: builtin/commit.c:1213 builtin/commit.c:1445
msgid "terminate entries with NUL"
msgstr "条目以NUL字符结尾"
-#: builtin/commit.c:1166 builtin/commit.c:1402 builtin/fast-export.c:659
-#: builtin/fast-export.c:662 builtin/tag.c:459
+#: builtin/commit.c:1215 builtin/commit.c:1448 builtin/fast-export.c:667
+#: builtin/fast-export.c:670 builtin/tag.c:459
msgid "mode"
msgstr "模式"
-#: builtin/commit.c:1167 builtin/commit.c:1402
+#: builtin/commit.c:1216 builtin/commit.c:1448
msgid "show untracked files, optional modes: all, normal, no. (Default: all)"
msgstr "显示未跟踪的文件，“模式”的可选参数：all、normal、no。（默认：all）"
-#: builtin/commit.c:1170
+#: builtin/commit.c:1219
msgid "show ignored files"
msgstr "显示忽略的文件"
-#: builtin/commit.c:1171 parse-options.h:151
+#: builtin/commit.c:1220 parse-options.h:154
msgid "when"
msgstr "何时"
-#: builtin/commit.c:1172
+#: builtin/commit.c:1221
msgid ""
"ignore changes to submodules, optional when: all, dirty, untracked. "
"(Default: all)"
msgstr ""
"忽略子模组的更改，“何时”的可选参数：all、dirty、untracked。（默认：all）"
-#: builtin/commit.c:1174
+#: builtin/commit.c:1223
msgid "list untracked files in columns"
msgstr "以列的方式显示未跟踪的文件"
-#: builtin/commit.c:1248
+#: builtin/commit.c:1294
msgid "couldn't look up newly created commit"
msgstr "无法找到新创建的提交"
-#: builtin/commit.c:1250
+#: builtin/commit.c:1296
msgid "could not parse newly created commit"
msgstr "不能解析新创建的提交"
-#: builtin/commit.c:1291
+#: builtin/commit.c:1337
msgid "detached HEAD"
msgstr "分离头指针"
# 译者：中文字符串拼接，可删除前导空格
-#: builtin/commit.c:1293
+#: builtin/commit.c:1339
msgid " (root-commit)"
msgstr "（根提交）"
-#: builtin/commit.c:1360
+#: builtin/commit.c:1406
msgid "suppress summary after successful commit"
msgstr "提交成功后不显示概述信息"
-#: builtin/commit.c:1361
+#: builtin/commit.c:1407
msgid "show diff in commit message template"
msgstr "在提交说明模板里显示差异"
-#: builtin/commit.c:1363
+#: builtin/commit.c:1409
msgid "Commit message options"
msgstr "提交说明选项"
-#: builtin/commit.c:1364 builtin/tag.c:457
+#: builtin/commit.c:1410 builtin/tag.c:457
msgid "read message from file"
msgstr "从文件中读取提交说明"
-#: builtin/commit.c:1365
+#: builtin/commit.c:1411
msgid "author"
msgstr "作者"
-#: builtin/commit.c:1365
+#: builtin/commit.c:1411
msgid "override author for commit"
msgstr "提交时覆盖作者"
-#: builtin/commit.c:1366 builtin/gc.c:178
+#: builtin/commit.c:1412 builtin/gc.c:178
msgid "date"
msgstr "日期"
-#: builtin/commit.c:1366
+#: builtin/commit.c:1412
msgid "override date for commit"
msgstr "提交时覆盖日期"
-#: builtin/commit.c:1367 builtin/merge.c:208 builtin/notes.c:533
-#: builtin/notes.c:690 builtin/tag.c:455
+#: builtin/commit.c:1413 builtin/merge.c:223 builtin/notes.c:405
+#: builtin/notes.c:562 builtin/tag.c:455
msgid "message"
msgstr "说明"
-#: builtin/commit.c:1367
+#: builtin/commit.c:1413
msgid "commit message"
msgstr "提交说明"
-#: builtin/commit.c:1368
+#: builtin/commit.c:1414
msgid "reuse and edit message from specified commit"
msgstr "重用并编辑指定提交的提交说明"
-#: builtin/commit.c:1369
+#: builtin/commit.c:1415
msgid "reuse message from specified commit"
msgstr "重用指定提交的提交说明"
-#: builtin/commit.c:1370
+#: builtin/commit.c:1416
msgid "use autosquash formatted message to fixup specified commit"
msgstr "使用 autosquash 格式的提交说明用以修正指定的提交"
-#: builtin/commit.c:1371
+#: builtin/commit.c:1417
msgid "use autosquash formatted message to squash specified commit"
msgstr "使用 autosquash 格式的提交说明用以压缩至指定的提交"
-#: builtin/commit.c:1372
+#: builtin/commit.c:1418
msgid "the commit is authored by me now (used with -C/-c/--amend)"
msgstr "现在将该提交的作者改为我（和 -C/-c/--amend 参数共用）"
-#: builtin/commit.c:1373 builtin/log.c:1113 builtin/revert.c:109
+#: builtin/commit.c:1419 builtin/log.c:1160 builtin/revert.c:111
msgid "add Signed-off-by:"
msgstr "添加 Signed-off-by: 签名"
-#: builtin/commit.c:1374
+#: builtin/commit.c:1420
msgid "use specified template file"
msgstr "使用指定的模板文件"
-#: builtin/commit.c:1375
+#: builtin/commit.c:1421
msgid "force edit of commit"
msgstr "强制编辑提交"
# 译者：可选值，不能翻译（或是原文中笔误，应为 mode）
-#: builtin/commit.c:1376
+#: builtin/commit.c:1422
msgid "default"
msgstr "default"
-#: builtin/commit.c:1376 builtin/tag.c:460
+#: builtin/commit.c:1422 builtin/tag.c:460
msgid "how to strip spaces and #comments from message"
msgstr "设置如何删除提交说明里的空格和#注释"
-#: builtin/commit.c:1377
+#: builtin/commit.c:1423
msgid "include status in commit message template"
msgstr "在提交说明模板里包含状态信息"
-#: builtin/commit.c:1378 builtin/merge.c:215 builtin/tag.c:461
+#: builtin/commit.c:1424 builtin/merge.c:230 builtin/tag.c:461
msgid "key id"
msgstr "key id"
-#: builtin/commit.c:1379 builtin/merge.c:216
+#: builtin/commit.c:1425 builtin/merge.c:231
msgid "GPG sign commit"
msgstr "GPG 提交签名"
#. end commit message options
-#: builtin/commit.c:1382
+#: builtin/commit.c:1428
msgid "Commit contents options"
msgstr "提交内容选项"
-#: builtin/commit.c:1383
+#: builtin/commit.c:1429
msgid "commit all changed files"
msgstr "提交所有改动的文件"
-#: builtin/commit.c:1384
+#: builtin/commit.c:1430
msgid "add specified files to index for commit"
msgstr "添加指定的文件到索引区等待提交"
-#: builtin/commit.c:1385
+#: builtin/commit.c:1431
msgid "interactively add files"
msgstr "交互式添加文件"
-#: builtin/commit.c:1386
+#: builtin/commit.c:1432
msgid "interactively add changes"
msgstr "交互式添加变更"
-#: builtin/commit.c:1387
+#: builtin/commit.c:1433
msgid "commit only specified files"
msgstr "只提交指定的文件"
-#: builtin/commit.c:1388
+#: builtin/commit.c:1434
msgid "bypass pre-commit hook"
msgstr "绕过 pre-commit 钩子"
-#: builtin/commit.c:1389
+#: builtin/commit.c:1435
msgid "show what would be committed"
msgstr "显示将要提交的内容"
-#: builtin/commit.c:1400
+#: builtin/commit.c:1446
msgid "amend previous commit"
msgstr "修改先前的提交"
-#: builtin/commit.c:1401
+#: builtin/commit.c:1447
msgid "bypass post-rewrite hook"
msgstr "绕过 post-rewrite 钩子"
-#: builtin/commit.c:1406
+#: builtin/commit.c:1452
msgid "ok to record an empty change"
msgstr "允许一个空提交"
-#: builtin/commit.c:1409
+#: builtin/commit.c:1455
msgid "ok to record a change with an empty message"
msgstr "允许空的提交说明"
-#: builtin/commit.c:1441
+#: builtin/commit.c:1488
msgid "could not parse HEAD commit"
msgstr "不能解析 HEAD 提交"
-#: builtin/commit.c:1479 builtin/merge.c:510
+#: builtin/commit.c:1526 builtin/merge.c:525
#, c-format
msgid "could not open '%s' for reading"
msgstr "不能为读入打开 '%s'"
-#: builtin/commit.c:1486
+#: builtin/commit.c:1533
#, c-format
msgid "Corrupt MERGE_HEAD file (%s)"
msgstr "损坏的 MERGE_HEAD 文件（%s）"
-#: builtin/commit.c:1493
+#: builtin/commit.c:1540
msgid "could not read MERGE_MODE"
msgstr "不能读取 MERGE_MODE"
-#: builtin/commit.c:1512
+#: builtin/commit.c:1559
#, c-format
msgid "could not read commit message: %s"
msgstr "不能读取提交说明：%s"
-#: builtin/commit.c:1526
+#: builtin/commit.c:1573
#, c-format
msgid "Aborting commit; you did not edit the message.\n"
msgstr "终止提交；您未更改来自模版的提交说明。\n"
-#: builtin/commit.c:1531
+#: builtin/commit.c:1578
#, c-format
msgid "Aborting commit due to empty commit message.\n"
msgstr "终止提交因为提交说明为空。\n"
-#: builtin/commit.c:1546 builtin/merge.c:847 builtin/merge.c:872
+#: builtin/commit.c:1593 builtin/merge.c:861 builtin/merge.c:886
msgid "failed to write commit object"
msgstr "无法写提交对象"
-#: builtin/commit.c:1567
+#: builtin/commit.c:1614
msgid "cannot lock HEAD ref"
msgstr "无法锁定 HEAD 引用"
-#: builtin/commit.c:1571
+#: builtin/commit.c:1618
msgid "cannot update HEAD ref"
msgstr "无法更新 HEAD 引用"
-#: builtin/commit.c:1582
+#: builtin/commit.c:1629
msgid ""
"Repository has been updated, but unable to write\n"
"new_index file. Check that disk is not full or quota is\n"
msgid "git config [options]"
msgstr "git config [选项]"
-#: builtin/config.c:51
+#: builtin/config.c:52
msgid "Config file location"
msgstr "配置文件位置"
-#: builtin/config.c:52
+#: builtin/config.c:53
msgid "use global config file"
msgstr "使用全局配置文件"
-#: builtin/config.c:53
+#: builtin/config.c:54
msgid "use system config file"
msgstr "使用系统级配置文件"
-#: builtin/config.c:54
+#: builtin/config.c:55
msgid "use repository config file"
msgstr "使用版本库级配置文件"
-#: builtin/config.c:55
+#: builtin/config.c:56
msgid "use given config file"
msgstr "使用指定的配置文件"
-#: builtin/config.c:56
+#: builtin/config.c:57
+msgid "blob-id"
+msgstr "数据对象ID"
+
+#: builtin/config.c:57
+msgid "read config from given blob object"
+msgstr "从给定的数据对象读取配置"
+
+#: builtin/config.c:58
msgid "Action"
msgstr "操作"
-#: builtin/config.c:57
+#: builtin/config.c:59
msgid "get value: name [value-regex]"
msgstr "获取值：name [value-regex]"
-#: builtin/config.c:58
+#: builtin/config.c:60
msgid "get all values: key [value-regex]"
msgstr "获得所有的值：key [value-regex]"
-#: builtin/config.c:59
+#: builtin/config.c:61
msgid "get values for regexp: name-regex [value-regex]"
msgstr "根据正则表达式获得值：name-regex [value-regex]"
-#: builtin/config.c:60
+#: builtin/config.c:62
msgid "replace all matching variables: name value [value_regex]"
msgstr "替换所有匹配的变量：name value [value_regex]"
-#: builtin/config.c:61
+#: builtin/config.c:63
msgid "add a new variable: name value"
msgstr "添加一个新的变量：name value"
-#: builtin/config.c:62
+#: builtin/config.c:64
msgid "remove a variable: name [value-regex]"
msgstr "删除一个变量：name [value-regex]"
-#: builtin/config.c:63
+#: builtin/config.c:65
msgid "remove all matches: name [value-regex]"
msgstr "删除所有匹配项：name [value-regex]"
-#: builtin/config.c:64
+#: builtin/config.c:66
msgid "rename section: old-name new-name"
msgstr "重命名小节：old-name new-name"
-#: builtin/config.c:65
+#: builtin/config.c:67
msgid "remove a section: name"
msgstr "删除一个小节：name"
-#: builtin/config.c:66
+#: builtin/config.c:68
msgid "list all"
msgstr "列出所有"
-#: builtin/config.c:67
+#: builtin/config.c:69
msgid "open an editor"
msgstr "打开一个编辑器"
-#: builtin/config.c:68 builtin/config.c:69
+#: builtin/config.c:70 builtin/config.c:71
msgid "slot"
msgstr "slot"
-#: builtin/config.c:68
+#: builtin/config.c:70
msgid "find the color configured: [default]"
msgstr "找到配置的颜色：[默认]"
-#: builtin/config.c:69
+#: builtin/config.c:71
msgid "find the color setting: [stdout-is-tty]"
msgstr "找到颜色设置：[stdout-is-tty]"
-#: builtin/config.c:70
+#: builtin/config.c:72
msgid "Type"
msgstr "类型"
-#: builtin/config.c:71
+#: builtin/config.c:73
msgid "value is \"true\" or \"false\""
msgstr "值是 \"true\" 或 \"false\""
-#: builtin/config.c:72
+#: builtin/config.c:74
msgid "value is decimal number"
msgstr "值是十进制数"
-#: builtin/config.c:73
+#: builtin/config.c:75
msgid "value is --bool or --int"
msgstr "值是 --bool or --int"
-#: builtin/config.c:74
+#: builtin/config.c:76
msgid "value is a path (file or directory name)"
msgstr "值是一个路径（文件或目录名）"
-#: builtin/config.c:75
+#: builtin/config.c:77
msgid "Other"
msgstr "其它"
-#: builtin/config.c:76
+#: builtin/config.c:78
msgid "terminate values with NUL byte"
msgstr "终止值是NUL字节"
-#: builtin/config.c:77
+#: builtin/config.c:79
msgid "respect include directives on lookup"
msgstr "查询时参照 include 指令递归查找"
msgid "print sizes in human readable format"
msgstr "以用户可读的格式显示大小"
-#: builtin/describe.c:15
+#: builtin/describe.c:16
msgid "git describe [options] <committish>*"
msgstr "git describe [选项] <提交号>*"
-#: builtin/describe.c:16
+#: builtin/describe.c:17
msgid "git describe [options] --dirty"
msgstr "git describe [选项] --dirty"
-#: builtin/describe.c:233
+#: builtin/describe.c:237
#, c-format
msgid "annotated tag %s not available"
msgstr "注释 tag %s 无效"
-#: builtin/describe.c:237
+#: builtin/describe.c:241
#, c-format
msgid "annotated tag %s has no embedded name"
msgstr "注释 tag %s 没有嵌入名称"
-#: builtin/describe.c:239
+#: builtin/describe.c:243
#, c-format
msgid "tag '%s' is really '%s' here"
msgstr "tag '%s' 的确是在 '%s'"
-#: builtin/describe.c:266
+#: builtin/describe.c:270
#, c-format
msgid "Not a valid object name %s"
msgstr "不是一个有效的对象名 %s"
-#: builtin/describe.c:269
+#: builtin/describe.c:273
#, c-format
msgid "%s is not a valid '%s' object"
msgstr "%s 不是一个有效的 '%s' 对象"
-#: builtin/describe.c:286
+#: builtin/describe.c:290
#, c-format
msgid "no tag exactly matches '%s'"
msgstr "没有 tag 准确匹配 '%s'"
-#: builtin/describe.c:288
+#: builtin/describe.c:292
#, c-format
msgid "searching to describe %s\n"
msgstr "搜索描述 %s\n"
-#: builtin/describe.c:328
+#: builtin/describe.c:332
#, c-format
msgid "finished search at %s\n"
msgstr "完成搜索 %s\n"
-#: builtin/describe.c:352
+#: builtin/describe.c:359
#, c-format
msgid ""
"No annotated tags can describe '%s'.\n"
"没有注释 tag 能描述 '%s'。\n"
"然而，有非注释 tag：尝试 --tags。"
-#: builtin/describe.c:356
+#: builtin/describe.c:363
#, c-format
msgid ""
"No tags can describe '%s'.\n"
"没有注释 tag 能描述 '%s'。\n"
"尝试 --always，或者创建一些 tag。"
-#: builtin/describe.c:377
+#: builtin/describe.c:384
#, c-format
msgid "traversed %lu commits\n"
msgstr "已遍历 %lu 个提交\n"
-#: builtin/describe.c:380
+#: builtin/describe.c:387
#, c-format
msgid ""
"more than %i tags found; listed %i most recent\n"
"发现多于 %i 个 tag，列出最近的 %i 个\n"
"在 %s 放弃搜索\n"
-#: builtin/describe.c:402
+#: builtin/describe.c:409
msgid "find the tag that comes after the commit"
msgstr "寻找提交之后的 tag（用于描述提交）"
-#: builtin/describe.c:403
+#: builtin/describe.c:410
msgid "debug search strategy on stderr"
msgstr "在标准错误上调试搜索策略"
-#: builtin/describe.c:404
+#: builtin/describe.c:411
msgid "use any ref"
msgstr "使用任意引用"
-#: builtin/describe.c:405
+#: builtin/describe.c:412
msgid "use any tag, even unannotated"
msgstr "使用任意 tag，即使未带注解"
-#: builtin/describe.c:406
+#: builtin/describe.c:413
msgid "always use long format"
msgstr "始终使用长提交号格式"
-#: builtin/describe.c:409
+#: builtin/describe.c:414
+msgid "only follow first parent"
+msgstr "只跟随第一个父提交"
+
+#: builtin/describe.c:417
msgid "only output exact matches"
msgstr "只输出精确匹配"
-#: builtin/describe.c:411
+#: builtin/describe.c:419
msgid "consider <n> most recent tags (default: 10)"
msgstr "考虑最近 <n> 个 tags（默认：10）"
-#: builtin/describe.c:413
+#: builtin/describe.c:421
msgid "only consider tags matching <pattern>"
msgstr "只考虑匹配 <模式> 的 tags"
-#: builtin/describe.c:415 builtin/name-rev.c:238
+#: builtin/describe.c:423 builtin/name-rev.c:322
msgid "show abbreviated commit object as fallback"
msgstr "显示简写的提交号作为后备"
-#: builtin/describe.c:416
+#: builtin/describe.c:424
msgid "mark"
msgstr "标记"
-#: builtin/describe.c:417
+#: builtin/describe.c:425
msgid "append <mark> on dirty working tree (default: \"-dirty\")"
msgstr "若工作区脏（有变更）在结尾添加 <标记>（默认：\"-dirty\"）"
-#: builtin/describe.c:435
+#: builtin/describe.c:443
msgid "--long is incompatible with --abbrev=0"
msgstr "--long 与 --abbrev=0 不兼容"
-#: builtin/describe.c:461
+#: builtin/describe.c:469
msgid "No names found, cannot describe anything."
msgstr "没有发现名称，无法描述任何东西。"
-#: builtin/describe.c:481
+#: builtin/describe.c:489
msgid "--dirty is incompatible with committishes"
msgstr "--dirty 不能与提交同时使用"
msgid "'%s': not a regular file or symlink"
msgstr "'%s'：不是一个正规文件或符号链接"
-#: builtin/diff.c:228
+#: builtin/diff.c:230
#, c-format
msgid "invalid option: %s"
msgstr "无效选项：%s"
-#: builtin/diff.c:305
+#: builtin/diff.c:307
msgid "Not a git repository"
msgstr "不是一个 git 版本库"
-#: builtin/diff.c:348
+#: builtin/diff.c:350
#, c-format
msgid "invalid object '%s' given."
msgstr "提供了无效对象 '%s'。"
-#: builtin/diff.c:353
-#, c-format
-msgid "more than %d trees given: '%s'"
-msgstr "提供了超过 %d 个树对象：'%s'"
-
-#: builtin/diff.c:363
+#: builtin/diff.c:359
#, c-format
msgid "more than two blobs given: '%s'"
msgstr "提供了超过两个数据（blob）对象：'%s'"
-#: builtin/diff.c:371
+#: builtin/diff.c:366
#, c-format
msgid "unhandled object '%s' given."
msgstr "提供了无法处理的对象 '%s'。"
msgid "git fast-export [rev-list-opts]"
msgstr "git fast-export [rev-list-opts]"
-#: builtin/fast-export.c:658
+#: builtin/fast-export.c:666
msgid "show progress after <n> objects"
msgstr "在 <n> 个对象之后显示进度"
-#: builtin/fast-export.c:660
+#: builtin/fast-export.c:668
msgid "select handling of signed tags"
msgstr "选择如何处理签名 tags"
-#: builtin/fast-export.c:663
+#: builtin/fast-export.c:671
msgid "select handling of tags that tag filtered objects"
msgstr "选择当 tag 指向被过滤时 tags 的处理方式"
-#: builtin/fast-export.c:666
+#: builtin/fast-export.c:674
msgid "Dump marks to this file"
msgstr "把标记存储到这个文件"
-#: builtin/fast-export.c:668
+#: builtin/fast-export.c:676
msgid "Import marks from this file"
msgstr "从这个文件导入标记"
-#: builtin/fast-export.c:670
+#: builtin/fast-export.c:678
msgid "Fake a tagger when tags lack one"
msgstr "当 tags 缺少标记者字段时，假装提供一个"
-#: builtin/fast-export.c:672
+#: builtin/fast-export.c:680
msgid "Output full tree for each commit"
msgstr "每次提交都输出整个树"
-#: builtin/fast-export.c:674
+#: builtin/fast-export.c:682
msgid "Use the done feature to terminate the stream"
msgstr "使用 done 功能来终止流"
-#: builtin/fast-export.c:675
+#: builtin/fast-export.c:683
msgid "Skip output of blob data"
msgstr "跳过数据对象的输出"
msgid "convert to a complete repository"
msgstr "转换为一个完整的版本库"
-#: builtin/fetch.c:88 builtin/log.c:1130
+#: builtin/fetch.c:88 builtin/log.c:1177
msgid "dir"
msgstr "目录"
msgid "default mode for recursion"
msgstr "递归的默认模式"
-#: builtin/fetch.c:204
+#: builtin/fetch.c:220
msgid "Couldn't find remote ref HEAD"
msgstr "无法发现远程 HEAD 引用"
-#: builtin/fetch.c:257
+#: builtin/fetch.c:273
#, c-format
msgid "object %s not found"
msgstr "对象 %s 未发现"
-#: builtin/fetch.c:262
+#: builtin/fetch.c:278
msgid "[up to date]"
msgstr "[最新]"
-#: builtin/fetch.c:276
+#: builtin/fetch.c:292
#, c-format
msgid "! %-*s %-*s -> %s (can't fetch in current branch)"
msgstr "! %-*s %-*s -> %s （在当前分支下不能获取）"
-#: builtin/fetch.c:277 builtin/fetch.c:363
+#: builtin/fetch.c:293 builtin/fetch.c:379
msgid "[rejected]"
msgstr "[已拒绝]"
-#: builtin/fetch.c:288
+#: builtin/fetch.c:304
msgid "[tag update]"
msgstr "[tag更新]"
# 译者：注意保持前导空格
-#: builtin/fetch.c:290 builtin/fetch.c:325 builtin/fetch.c:343
+#: builtin/fetch.c:306 builtin/fetch.c:341 builtin/fetch.c:359
msgid " (unable to update local ref)"
msgstr " （不能更新本地引用）"
-#: builtin/fetch.c:308
+#: builtin/fetch.c:324
msgid "[new tag]"
msgstr "[新tag]"
-#: builtin/fetch.c:311
+#: builtin/fetch.c:327
msgid "[new branch]"
msgstr "[新分支]"
-#: builtin/fetch.c:314
+#: builtin/fetch.c:330
msgid "[new ref]"
msgstr "[新引用]"
-#: builtin/fetch.c:359
+#: builtin/fetch.c:375
msgid "unable to update local ref"
msgstr "不能更新本地引用"
-#: builtin/fetch.c:359
+#: builtin/fetch.c:375
msgid "forced update"
msgstr "强制更新"
-#: builtin/fetch.c:365
+#: builtin/fetch.c:381
msgid "(non-fast-forward)"
msgstr "（非快进式）"
-#: builtin/fetch.c:396 builtin/fetch.c:688
+#: builtin/fetch.c:412 builtin/fetch.c:718
#, c-format
msgid "cannot open %s: %s\n"
msgstr "无法打开 %s：%s\n"
-#: builtin/fetch.c:405
+#: builtin/fetch.c:421
#, c-format
msgid "%s did not send all necessary objects\n"
msgstr "%s 未发送所有必须的对象\n"
-#: builtin/fetch.c:491
+#: builtin/fetch.c:520
#, c-format
msgid "From %.*s\n"
msgstr "来自 %.*s\n"
-#: builtin/fetch.c:502
+#: builtin/fetch.c:531
#, c-format
msgid ""
"some local refs could not be updated; try running\n"
" 'git remote prune %s' 来删除旧的、有冲突的分支"
# 译者：注意保持前导空格
-#: builtin/fetch.c:552
+#: builtin/fetch.c:581
#, c-format
msgid " (%s will become dangling)"
msgstr " （%s 将成为摇摆状态）"
# 译者：注意保持前导空格
-#: builtin/fetch.c:553
+#: builtin/fetch.c:582
#, c-format
msgid " (%s has become dangling)"
msgstr " （%s 已成为摇摆状态）"
-#: builtin/fetch.c:560
+#: builtin/fetch.c:589
msgid "[deleted]"
msgstr "[已删除]"
-#: builtin/fetch.c:561 builtin/remote.c:1055
+#: builtin/fetch.c:590 builtin/remote.c:1055
msgid "(none)"
msgstr "（无）"
-#: builtin/fetch.c:678
+#: builtin/fetch.c:708
#, c-format
msgid "Refusing to fetch into current branch %s of non-bare repository"
msgstr "拒绝获取到非裸版本库的当前分支 %s"
-#: builtin/fetch.c:712
+#: builtin/fetch.c:742
#, c-format
msgid "Don't know how to fetch from %s"
msgstr "不知道如何从 %s 获取"
-#: builtin/fetch.c:789
+#: builtin/fetch.c:823
#, c-format
msgid "Option \"%s\" value \"%s\" is not valid for %s"
msgstr "选项 \"%s\" 的值 \"%s\" 对于 %s 是无效的"
-#: builtin/fetch.c:792
+#: builtin/fetch.c:826
#, c-format
msgid "Option \"%s\" is ignored for %s\n"
msgstr "选项 \"%s\" 为 %s 所忽略\n"
-#: builtin/fetch.c:894
+#: builtin/fetch.c:928
#, c-format
msgid "Fetching %s\n"
msgstr "正在获取 %s\n"
-#: builtin/fetch.c:896 builtin/remote.c:100
+#: builtin/fetch.c:930 builtin/remote.c:100
#, c-format
msgid "Could not fetch %s"
msgstr "不能获取 %s"
-#: builtin/fetch.c:915
+#: builtin/fetch.c:949
msgid ""
"No remote repository specified. Please, specify either a URL or a\n"
"remote name from which new revisions should be fetched."
msgstr "未指定远程版本库。请通过一个URL或远程版本库名指定，用以获取新提交。"
-#: builtin/fetch.c:935
+#: builtin/fetch.c:969
msgid "You need to specify a tag name."
msgstr "您需要指定一个 tag 名称。"
-#: builtin/fetch.c:981
+#: builtin/fetch.c:1015
msgid "--depth and --unshallow cannot be used together"
msgstr "--depth 和 --unshallow 不能同时使用"
-#: builtin/fetch.c:983
+#: builtin/fetch.c:1017
msgid "--unshallow on a complete repository does not make sense"
msgstr "对于一个完整的版本库，参数 --unshallow 没有意义"
-#: builtin/fetch.c:1002
+#: builtin/fetch.c:1036
msgid "fetch --all does not take a repository argument"
msgstr "fetch --all 不能带一个版本库参数"
-#: builtin/fetch.c:1004
+#: builtin/fetch.c:1038
msgid "fetch --all does not make sense with refspecs"
msgstr "fetch --all 带引用表达式没有任何意义"
-#: builtin/fetch.c:1015
+#: builtin/fetch.c:1049
#, c-format
msgid "No such remote or remote group: %s"
msgstr "没有这样的远程或远程组：%s"
-#: builtin/fetch.c:1023
+#: builtin/fetch.c:1057
msgid "Fetching a group and specifying refspecs does not make sense"
msgstr "获取组并指定引用表达式没有意义"
msgstr ""
"git fmt-merge-msg [-m <message>] [--log[=<n>]|--no-log] [--file <file>]"
-#: builtin/fmt-merge-msg.c:663 builtin/fmt-merge-msg.c:666 builtin/grep.c:701
-#: builtin/merge.c:188 builtin/show-branch.c:655 builtin/show-ref.c:175
-#: builtin/tag.c:446 parse-options.h:133 parse-options.h:239
+#: builtin/fmt-merge-msg.c:663 builtin/fmt-merge-msg.c:666 builtin/grep.c:700
+#: builtin/merge.c:203 builtin/show-branch.c:655 builtin/show-ref.c:179
+#: builtin/tag.c:446 parse-options.h:133 parse-options.h:243
msgid "n"
msgstr "n"
msgid "grep: failed to create thread: %s"
msgstr "grep：无法创建线程：%s"
-#: builtin/grep.c:365
+#: builtin/grep.c:364
#, c-format
msgid "Failed to chdir: %s"
msgstr "无法切换目录：%s"
-#: builtin/grep.c:443 builtin/grep.c:478
+#: builtin/grep.c:442 builtin/grep.c:477
#, c-format
msgid "unable to read tree (%s)"
msgstr "无法读取树（%s）"
-#: builtin/grep.c:493
+#: builtin/grep.c:492
#, c-format
msgid "unable to grep from object of type %s"
msgstr "无法抓取来自于 %s 类型的对象"
-#: builtin/grep.c:551
+#: builtin/grep.c:550
#, c-format
msgid "switch `%c' expects a numerical value"
msgstr "开关 `%c' 期望一个数字值"
-#: builtin/grep.c:568
+#: builtin/grep.c:567
#, c-format
msgid "cannot open '%s'"
msgstr "不能打开 '%s'"
-#: builtin/grep.c:643
+#: builtin/grep.c:642
msgid "search in index instead of in the work tree"
msgstr "在索引区搜索而不是在工作区"
-#: builtin/grep.c:645
+#: builtin/grep.c:644
msgid "find in contents not managed by git"
msgstr "在未被 git 管理的内容中查找"
# 译者：中文字符串拼接，可删除前导空格
-#: builtin/grep.c:647
+#: builtin/grep.c:646
msgid "search in both tracked and untracked files"
msgstr "在跟踪和未跟踪的文件中搜索"
-#: builtin/grep.c:649
+#: builtin/grep.c:648
msgid "search also in ignored files"
msgstr "也在忽略的文件中搜索"
-#: builtin/grep.c:652
+#: builtin/grep.c:651
msgid "show non-matching lines"
msgstr "显示未匹配的行"
-#: builtin/grep.c:654
+#: builtin/grep.c:653
msgid "case insensitive matching"
msgstr "不区分大小写匹配"
-#: builtin/grep.c:656
+#: builtin/grep.c:655
msgid "match patterns only at word boundaries"
msgstr "只在单词边界匹配模式"
-#: builtin/grep.c:658
+#: builtin/grep.c:657
msgid "process binary files as text"
msgstr "把二进制文件当做文本处理"
-#: builtin/grep.c:660
+#: builtin/grep.c:659
msgid "don't match patterns in binary files"
msgstr "不在二进制文件中匹配模式"
-#: builtin/grep.c:663
+#: builtin/grep.c:662
msgid "descend at most <depth> levels"
msgstr "最多以指定的深度向下寻找"
-#: builtin/grep.c:667
+#: builtin/grep.c:666
msgid "use extended POSIX regular expressions"
msgstr "使用扩展的 POSIX 正则表达式"
-#: builtin/grep.c:670
+#: builtin/grep.c:669
msgid "use basic POSIX regular expressions (default)"
msgstr "使用基本的 POSIX 正则表达式（默认）"
-#: builtin/grep.c:673
+#: builtin/grep.c:672
msgid "interpret patterns as fixed strings"
msgstr "把模式解析为固定的字符串"
-#: builtin/grep.c:676
+#: builtin/grep.c:675
msgid "use Perl-compatible regular expressions"
msgstr "使用 Perl 兼容的正则表达式"
-#: builtin/grep.c:679
+#: builtin/grep.c:678
msgid "show line numbers"
msgstr "显示行号"
-#: builtin/grep.c:680
+#: builtin/grep.c:679
msgid "don't show filenames"
msgstr "不显示文件名"
-#: builtin/grep.c:681
+#: builtin/grep.c:680
msgid "show filenames"
msgstr "显示文件名"
-#: builtin/grep.c:683
+#: builtin/grep.c:682
msgid "show filenames relative to top directory"
msgstr "显示相对于顶级目录的文件名"
-#: builtin/grep.c:685
+#: builtin/grep.c:684
msgid "show only filenames instead of matching lines"
msgstr "只显示文件名而不显示匹配的行"
-#: builtin/grep.c:687
+#: builtin/grep.c:686
msgid "synonym for --files-with-matches"
msgstr "和 --files-with-matches 同义"
-#: builtin/grep.c:690
+#: builtin/grep.c:689
msgid "show only the names of files without match"
msgstr "只显示未匹配的文件名"
-#: builtin/grep.c:692
+#: builtin/grep.c:691
msgid "print NUL after filenames"
msgstr "在文件名后输出 NUL 字符"
-#: builtin/grep.c:694
+#: builtin/grep.c:693
msgid "show the number of matches instead of matching lines"
msgstr "显示总匹配行数，而不显示匹配的行"
-#: builtin/grep.c:695
+#: builtin/grep.c:694
msgid "highlight matches"
msgstr "高亮显示匹配项"
-#: builtin/grep.c:697
+#: builtin/grep.c:696
msgid "print empty line between matches from different files"
msgstr "在不同文件的匹配项之间打印空行"
-#: builtin/grep.c:699
+#: builtin/grep.c:698
msgid "show filename only once above matches from same file"
msgstr "只在同一文件的匹配项的上面显示一次文件名"
-#: builtin/grep.c:702
+#: builtin/grep.c:701
msgid "show <n> context lines before and after matches"
msgstr "显示匹配项前后的 <n> 行上下文"
-#: builtin/grep.c:705
+#: builtin/grep.c:704
msgid "show <n> context lines before matches"
msgstr "显示匹配项前 <n> 行上下文"
-#: builtin/grep.c:707
+#: builtin/grep.c:706
msgid "show <n> context lines after matches"
msgstr "显示匹配项后 <n> 行上下文"
-#: builtin/grep.c:708
+#: builtin/grep.c:707
msgid "shortcut for -C NUM"
msgstr "快捷键 -C 数字"
-#: builtin/grep.c:711
+#: builtin/grep.c:710
msgid "show a line with the function name before matches"
msgstr "在匹配的前面显示一行函数名"
-#: builtin/grep.c:713
+#: builtin/grep.c:712
msgid "show the surrounding function"
msgstr "显示所在函数的前后内容"
-#: builtin/grep.c:716
+#: builtin/grep.c:715
msgid "read patterns from file"
msgstr "从文件读取模式"
-#: builtin/grep.c:718
+#: builtin/grep.c:717
msgid "match <pattern>"
msgstr "匹配 <模式>"
-#: builtin/grep.c:720
+#: builtin/grep.c:719
msgid "combine patterns specified with -e"
msgstr "组合用 -e 参数设定的模式"
-#: builtin/grep.c:732
+#: builtin/grep.c:731
msgid "indicate hit with exit status without output"
msgstr "不输出，而用退出码标识命中状态"
-#: builtin/grep.c:734
+#: builtin/grep.c:733
msgid "show only matches from files that match all patterns"
msgstr "只显示匹配所有模式的文件中的匹配"
-#: builtin/grep.c:736
+#: builtin/grep.c:735
msgid "show parse tree for grep expression"
msgstr "显示 grep 表达式的解析树"
-#: builtin/grep.c:740
+#: builtin/grep.c:739
msgid "pager"
msgstr "分页"
-#: builtin/grep.c:740
+#: builtin/grep.c:739
msgid "show matching files in the pager"
msgstr "分页显示匹配的文件"
-#: builtin/grep.c:743
+#: builtin/grep.c:742
msgid "allow calling of grep(1) (ignored by this build)"
msgstr "允许调用 grep(1)（本次构建忽略）"
-#: builtin/grep.c:744 builtin/show-ref.c:184
+#: builtin/grep.c:743 builtin/show-ref.c:188
msgid "show usage"
msgstr "显示用法"
-#: builtin/grep.c:811
+#: builtin/grep.c:810
msgid "no pattern given."
msgstr "未提供模式匹配。"
-#: builtin/grep.c:866
+#: builtin/grep.c:865
msgid "--open-files-in-pager only works on the worktree"
msgstr "--open-files-in-pager 仅用于工作区"
-#: builtin/grep.c:889
+#: builtin/grep.c:888
msgid "--cached or --untracked cannot be used with --no-index."
msgstr "--cached 或 --untracked 不能与 --no-index 同时使用。"
-#: builtin/grep.c:894
+#: builtin/grep.c:893
msgid "--no-index or --untracked cannot be used with revs."
msgstr "--no-index 或 --untracked 不能和版本同时使用。"
-#: builtin/grep.c:897
+#: builtin/grep.c:896
msgid "--[no-]exclude-standard cannot be used for tracked contents."
msgstr "--[no-]exclude-standard 不能用于已跟踪内容。"
-#: builtin/grep.c:905
+#: builtin/grep.c:904
msgid "both --cached and trees are given."
msgstr "同时给出了 --cached 和树对象。"
msgid "process file as it were from this path"
msgstr "处理文件并假设其来自于此路径"
-#: builtin/help.c:43
+#: builtin/help.c:41
msgid "print all available commands"
msgstr "打印所有可用的命令"
-#: builtin/help.c:44
+#: builtin/help.c:42
msgid "print list of useful guides"
msgstr "显示有用的指南列表"
-#: builtin/help.c:45
+#: builtin/help.c:43
msgid "show man page"
msgstr "显示 man 手册"
-#: builtin/help.c:46
+#: builtin/help.c:44
msgid "show manual in web browser"
msgstr "在 web 浏览器中显示手册"
-#: builtin/help.c:48
+#: builtin/help.c:46
msgid "show info page"
msgstr "显示 info 手册"
-#: builtin/help.c:54
+#: builtin/help.c:52
msgid "git help [--all] [--guides] [--man|--web|--info] [command]"
msgstr "git help [--all] [--guides] [--man|--web|--info] [命令]"
-#: builtin/help.c:66
+#: builtin/help.c:64
#, c-format
msgid "unrecognized help format '%s'"
msgstr "未能识别的帮助格式 '%s'"
-#: builtin/help.c:94
+#: builtin/help.c:92
msgid "Failed to start emacsclient."
msgstr "无法启动 emacsclient。"
-#: builtin/help.c:107
+#: builtin/help.c:105
msgid "Failed to parse emacsclient version."
msgstr "无法解析 emacsclient 版本。"
-#: builtin/help.c:115
+#: builtin/help.c:113
#, c-format
msgid "emacsclient version '%d' too old (< 22)."
msgstr "emacsclient 版本 '%d' 太老（< 22）。"
-#: builtin/help.c:133 builtin/help.c:161 builtin/help.c:170 builtin/help.c:178
+#: builtin/help.c:131 builtin/help.c:159 builtin/help.c:168 builtin/help.c:176
#, c-format
msgid "failed to exec '%s': %s"
msgstr "无法执行 '%s'：%s"
-#: builtin/help.c:218
+#: builtin/help.c:216
#, c-format
msgid ""
"'%s': path for unsupported man viewer.\n"
"'%s'：不支持的 man 手册查看器的路径。\n"
"请使用 'man.<tool>.cmd'。"
-#: builtin/help.c:230
+#: builtin/help.c:228
#, c-format
msgid ""
"'%s': cmd for supported man viewer.\n"
"'%s': 支持的 man 手册查看器命令。\n"
"请使用 'man.<tool>.path'。"
-#: builtin/help.c:351
+#: builtin/help.c:349
#, c-format
msgid "'%s': unknown man viewer."
msgstr "'%s'：未知的 man 查看器。"
-#: builtin/help.c:368
+#: builtin/help.c:366
msgid "no man viewer handled the request"
msgstr "没有 man 查看器处理此请求"
-#: builtin/help.c:376
+#: builtin/help.c:374
msgid "no info viewer handled the request"
msgstr "没有 info 查看器处理此请求"
-#: builtin/help.c:422
+#: builtin/help.c:420
msgid "Defining attributes per path"
msgstr "定义路径的属性"
-#: builtin/help.c:423
+#: builtin/help.c:421
msgid "A Git glossary"
msgstr "Git 词汇表"
-#: builtin/help.c:424
+#: builtin/help.c:422
msgid "Specifies intentionally untracked files to ignore"
msgstr "忽略指定的未跟踪文件"
-#: builtin/help.c:425
+#: builtin/help.c:423
msgid "Defining submodule properties"
msgstr "定义子模组属性"
-#: builtin/help.c:426
+#: builtin/help.c:424
msgid "Specifying revisions and ranges for Git"
msgstr "指定 Git 的版本和版本范围"
-#: builtin/help.c:427
+#: builtin/help.c:425
msgid "A tutorial introduction to Git (for version 1.5.1 or newer)"
msgstr "一个 Git 教程（针对 1.5.1 或更新版本）"
-#: builtin/help.c:428
+#: builtin/help.c:426
msgid "An overview of recommended workflows with Git"
msgstr "Git 推荐的工作流概览"
-#: builtin/help.c:440
+#: builtin/help.c:438
msgid "The common Git guides are:\n"
msgstr "最常用的 Git 向导有：\n"
-#: builtin/help.c:462 builtin/help.c:478
+#: builtin/help.c:460 builtin/help.c:476
#, c-format
msgid "usage: %s%s"
msgstr "用法：%s%s"
-#: builtin/help.c:494
+#: builtin/help.c:492
#, c-format
msgid "`git %s' is aliased to `%s'"
msgstr "`git %s' 是 `%s' 的别名"
-#: builtin/index-pack.c:182
+#: builtin/index-pack.c:184
#, c-format
msgid "object type mismatch at %s"
msgstr "%s 的对象类型不匹配"
-#: builtin/index-pack.c:202
+#: builtin/index-pack.c:204
msgid "object of unexpected type"
msgstr "意外的类型的对象"
-#: builtin/index-pack.c:239
+#: builtin/index-pack.c:244
#, c-format
msgid "cannot fill %d byte"
msgid_plural "cannot fill %d bytes"
msgstr[0] "无法填充 %d 字节"
msgstr[1] "无法填充 %d 字节"
-#: builtin/index-pack.c:249
+#: builtin/index-pack.c:254
msgid "early EOF"
msgstr "过早的文件结束符（EOF）"
-#: builtin/index-pack.c:250
+#: builtin/index-pack.c:255
msgid "read error on input"
msgstr "输入上的读错误"
-#: builtin/index-pack.c:262
+#: builtin/index-pack.c:267
msgid "used more bytes than were available"
msgstr "用掉了超过可用的字节"
-#: builtin/index-pack.c:269
+#: builtin/index-pack.c:274
msgid "pack too large for current definition of off_t"
msgstr "包太大超过了当前 off_t 的定义"
-#: builtin/index-pack.c:285
+#: builtin/index-pack.c:290
#, c-format
msgid "unable to create '%s'"
msgstr "不能创建 '%s'"
-#: builtin/index-pack.c:290
+#: builtin/index-pack.c:295
#, c-format
msgid "cannot open packfile '%s'"
msgstr "无法打开包文件 '%s'"
-#: builtin/index-pack.c:304
+#: builtin/index-pack.c:309
msgid "pack signature mismatch"
msgstr "包签名不匹配"
-#: builtin/index-pack.c:306
+#: builtin/index-pack.c:311
#, c-format
msgid "pack version %<PRIu32> unsupported"
msgstr "不支持包版本 %<PRIu32>"
-#: builtin/index-pack.c:324
+#: builtin/index-pack.c:329
#, c-format
msgid "pack has bad object at offset %lu: %s"
msgstr "包中有错误的对象位于 %lu：%s"
-#: builtin/index-pack.c:446
+#: builtin/index-pack.c:451
#, c-format
msgid "inflate returned %d"
msgstr "解压缩返回 %d"
-#: builtin/index-pack.c:495
+#: builtin/index-pack.c:500
msgid "offset value overflow for delta base object"
msgstr "偏移值覆盖了 delta 基准对象"
-#: builtin/index-pack.c:503
+#: builtin/index-pack.c:508
msgid "delta base offset is out of bound"
msgstr "delta 基准偏移越界"
-#: builtin/index-pack.c:511
+#: builtin/index-pack.c:516
#, c-format
msgid "unknown object type %d"
msgstr "未知对象类型 %d"
-#: builtin/index-pack.c:542
+#: builtin/index-pack.c:547
msgid "cannot pread pack file"
msgstr "无法读取包文件"
-#: builtin/index-pack.c:544
+#: builtin/index-pack.c:549
#, c-format
msgid "premature end of pack file, %lu byte missing"
msgid_plural "premature end of pack file, %lu bytes missing"
msgstr[0] "包文件过早结束，缺少 %lu 字节"
msgstr[1] "包文件过早结束，缺少 %lu 字节"
-#: builtin/index-pack.c:570
+#: builtin/index-pack.c:575
msgid "serious inflate inconsistency"
msgstr "解压缩严重的不一致"
-#: builtin/index-pack.c:661 builtin/index-pack.c:667 builtin/index-pack.c:690
-#: builtin/index-pack.c:724 builtin/index-pack.c:733
+#: builtin/index-pack.c:666 builtin/index-pack.c:672 builtin/index-pack.c:695
+#: builtin/index-pack.c:729 builtin/index-pack.c:738
#, c-format
msgid "SHA1 COLLISION FOUND WITH %s !"
msgstr "发现 %s 出现 SHA1 冲突！"
-#: builtin/index-pack.c:664 builtin/pack-objects.c:170
+#: builtin/index-pack.c:669 builtin/pack-objects.c:170
#: builtin/pack-objects.c:262
#, c-format
msgid "unable to read %s"
msgstr "不能读 %s"
-#: builtin/index-pack.c:730
+#: builtin/index-pack.c:735
#, c-format
msgid "cannot read existing object %s"
msgstr "不能读取现存对象 %s"
-#: builtin/index-pack.c:744
+#: builtin/index-pack.c:749
#, c-format
msgid "invalid blob object %s"
msgstr "无效的数据（blob）对象 %s"
-#: builtin/index-pack.c:759
+#: builtin/index-pack.c:763
#, c-format
msgid "invalid %s"
msgstr "无效的 %s"
-#: builtin/index-pack.c:761
+#: builtin/index-pack.c:766
msgid "Error in object"
msgstr "对象中出错"
-#: builtin/index-pack.c:763
+#: builtin/index-pack.c:768
#, c-format
msgid "Not all child objects of %s are reachable"
msgstr "%s 的所有子对象并非都可达"
-#: builtin/index-pack.c:833 builtin/index-pack.c:863
+#: builtin/index-pack.c:838 builtin/index-pack.c:868
msgid "failed to apply delta"
msgstr "无法应用 delta"
-#: builtin/index-pack.c:1004
+#: builtin/index-pack.c:1009
msgid "Receiving objects"
msgstr "接收对象中"
-#: builtin/index-pack.c:1004
+#: builtin/index-pack.c:1009
msgid "Indexing objects"
msgstr "索引对象中"
-#: builtin/index-pack.c:1030
+#: builtin/index-pack.c:1035
msgid "pack is corrupted (SHA1 mismatch)"
msgstr "包冲突（SHA1 不匹配）"
-#: builtin/index-pack.c:1035
+#: builtin/index-pack.c:1040
msgid "cannot fstat packfile"
msgstr "不能枚举包文件状态"
-#: builtin/index-pack.c:1038
+#: builtin/index-pack.c:1043
msgid "pack has junk at the end"
msgstr "包的结尾有垃圾数据"
-#: builtin/index-pack.c:1049
+#: builtin/index-pack.c:1054
msgid "confusion beyond insanity in parse_pack_objects()"
msgstr "parse_pack_objects() 中遇到不可理喻的问题"
-#: builtin/index-pack.c:1072
+#: builtin/index-pack.c:1077
msgid "Resolving deltas"
msgstr "处理 delta 中"
-#: builtin/index-pack.c:1082
+#: builtin/index-pack.c:1087
#, c-format
msgid "unable to create thread: %s"
msgstr "不能创建线程：%s"
-#: builtin/index-pack.c:1124
+#: builtin/index-pack.c:1129
msgid "confusion beyond insanity"
msgstr "不可理喻"
-#: builtin/index-pack.c:1132
+#: builtin/index-pack.c:1137
#, c-format
msgid "completed with %d local objects"
msgstr "完成 %d 个本地对象"
-#: builtin/index-pack.c:1142
+#: builtin/index-pack.c:1147
#, c-format
msgid "Unexpected tail checksum for %s (disk corruption?)"
msgstr "对 %s 的尾部校验出现意外（磁盘损坏？）"
-#: builtin/index-pack.c:1146
+#: builtin/index-pack.c:1151
#, c-format
msgid "pack has %d unresolved delta"
msgid_plural "pack has %d unresolved deltas"
msgstr[0] "包有 %d 个未解决的 delta"
msgstr[1] "包有 %d 个未解决的 delta"
-#: builtin/index-pack.c:1171
+#: builtin/index-pack.c:1176
#, c-format
msgid "unable to deflate appended object (%d)"
msgstr "不能压缩附加对象（%d）"
-#: builtin/index-pack.c:1250
+#: builtin/index-pack.c:1255
#, c-format
msgid "local object %s is corrupt"
msgstr "本地对象 %s 已损坏"
-#: builtin/index-pack.c:1274
+#: builtin/index-pack.c:1279
msgid "error while closing pack file"
msgstr "关闭包文件时出错"
-#: builtin/index-pack.c:1287
+#: builtin/index-pack.c:1292
#, c-format
msgid "cannot write keep file '%s'"
msgstr "无法写保留文件 '%s'"
-#: builtin/index-pack.c:1295
+#: builtin/index-pack.c:1300
#, c-format
msgid "cannot close written keep file '%s'"
msgstr "无法关闭保留文件 '%s'"
-#: builtin/index-pack.c:1308
+#: builtin/index-pack.c:1313
msgid "cannot store pack file"
msgstr "无法存储包文件"
-#: builtin/index-pack.c:1319
+#: builtin/index-pack.c:1324
msgid "cannot store index file"
msgstr "无法存储索引文件"
-#: builtin/index-pack.c:1352
+#: builtin/index-pack.c:1357
#, c-format
msgid "bad pack.indexversion=%<PRIu32>"
msgstr "坏的 pack.indexversion=%<PRIu32>"
-#: builtin/index-pack.c:1358
+#: builtin/index-pack.c:1363
#, c-format
msgid "invalid number of threads specified (%d)"
msgstr "指定的线程数无效（%d）"
-#: builtin/index-pack.c:1362 builtin/index-pack.c:1535
+#: builtin/index-pack.c:1367 builtin/index-pack.c:1545
#, c-format
msgid "no threads support, ignoring %s"
msgstr "没有线程支持，忽略 %s"
-#: builtin/index-pack.c:1420
+#: builtin/index-pack.c:1425
#, c-format
msgid "Cannot open existing pack file '%s'"
msgstr "无法打开现存包文件 '%s'"
-#: builtin/index-pack.c:1422
+#: builtin/index-pack.c:1427
#, c-format
msgid "Cannot open existing pack idx file for '%s'"
msgstr "无法为 %s 打开包索引文件"
-#: builtin/index-pack.c:1469
+#: builtin/index-pack.c:1474
#, c-format
msgid "non delta: %d object"
msgid_plural "non delta: %d objects"
msgstr[0] "非 delta：%d 个对象"
msgstr[1] "非 delta：%d 个对象"
-#: builtin/index-pack.c:1476
+#: builtin/index-pack.c:1481
#, c-format
msgid "chain length = %d: %lu object"
msgid_plural "chain length = %d: %lu objects"
msgstr[0] "链长 = %d: %lu 对象"
msgstr[1] "链长 = %d: %lu 对象"
-#: builtin/index-pack.c:1503
+#: builtin/index-pack.c:1509
msgid "Cannot come back to cwd"
msgstr "无法返回当前工作目录"
-#: builtin/index-pack.c:1547 builtin/index-pack.c:1550
-#: builtin/index-pack.c:1562 builtin/index-pack.c:1566
+#: builtin/index-pack.c:1557 builtin/index-pack.c:1560
+#: builtin/index-pack.c:1572 builtin/index-pack.c:1576
#, c-format
msgid "bad %s"
msgstr "错误选项 %s"
-#: builtin/index-pack.c:1580
+#: builtin/index-pack.c:1590
msgid "--fix-thin cannot be used without --stdin"
msgstr "--fix-thin 不能和 --stdin 同时使用"
-#: builtin/index-pack.c:1584 builtin/index-pack.c:1594
+#: builtin/index-pack.c:1594 builtin/index-pack.c:1604
#, c-format
msgid "packfile name '%s' does not end with '.pack'"
msgstr "包名 '%s' 没有以 '.pack' 结尾"
-#: builtin/index-pack.c:1603
+#: builtin/index-pack.c:1613
msgid "--verify with no packfile name given"
msgstr "--verify 没有提供包名参数"
msgid "specify that the git repository is to be shared amongst several users"
msgstr "指定 git 版本库是多个用户之间共享的"
-#: builtin/init-db.c:493 builtin/prune-packed.c:77
+#: builtin/init-db.c:493 builtin/prune-packed.c:75
msgid "be quiet"
msgstr "保持安静"
msgid "Cannot access work tree '%s'"
msgstr "不能访问工作区 '%s'"
-#: builtin/log.c:40
+#: builtin/log.c:41
msgid "git log [<options>] [<revision range>] [[--] <path>...]\n"
msgstr "git log [<选项>] [<版本范围>] [[--] <路径>...]\n"
-#: builtin/log.c:41
+#: builtin/log.c:42
msgid " or: git show [options] <object>..."
msgstr " 或者：git show [选项] <对象>..."
-#: builtin/log.c:103
+#: builtin/log.c:124
msgid "suppress diff output"
msgstr "不显示差异输出"
-#: builtin/log.c:104
+#: builtin/log.c:125
msgid "show source"
msgstr "显示源"
-#: builtin/log.c:105
+#: builtin/log.c:126
msgid "Use mail map file"
msgstr "使用邮件映射文件"
-#: builtin/log.c:106
+#: builtin/log.c:127
msgid "decorate options"
msgstr "修饰选项"
-#: builtin/log.c:199
+#: builtin/log.c:230
#, c-format
msgid "Final output: %d %s\n"
msgstr "最终输出：%d %s\n"
-#: builtin/log.c:422 builtin/log.c:514
+#: builtin/log.c:453 builtin/log.c:545
#, c-format
msgid "Could not read object %s"
msgstr "不能读取对象 %s"
-#: builtin/log.c:538
+#: builtin/log.c:569
#, c-format
msgid "Unknown type: %d"
msgstr "未知类型：%d"
-#: builtin/log.c:638
+#: builtin/log.c:669
msgid "format.headers without value"
msgstr "format.headers 没有值"
-#: builtin/log.c:720
+#: builtin/log.c:751
msgid "name of output directory is too long"
msgstr "输出目录名太长"
-#: builtin/log.c:736
+#: builtin/log.c:767
#, c-format
msgid "Cannot open patch file %s"
msgstr "无法打开补丁文件 %s"
-#: builtin/log.c:750
+#: builtin/log.c:781
msgid "Need exactly one range."
msgstr "只需要一个范围。"
-#: builtin/log.c:758
+#: builtin/log.c:789
msgid "Not a range."
msgstr "不是一个范围。"
-#: builtin/log.c:860
+#: builtin/log.c:891
msgid "Cover letter needs email format"
msgstr "信封需要邮件地址格式"
-#: builtin/log.c:936
+#: builtin/log.c:967
#, c-format
msgid "insane in-reply-to: %s"
msgstr "不正常的 in-reply-to：%s"
-#: builtin/log.c:964
+#: builtin/log.c:995
msgid "git format-patch [options] [<since> | <revision range>]"
msgstr "git format-patch [选项] [<从> | <修订集范围>]"
-#: builtin/log.c:1009
+#: builtin/log.c:1040
msgid "Two output directories?"
msgstr "两个输出目录？"
-#: builtin/log.c:1108
+#: builtin/log.c:1155
msgid "use [PATCH n/m] even with a single patch"
msgstr "使用 [PATCH n/m]，即使只有一个补丁"
-#: builtin/log.c:1111
+#: builtin/log.c:1158
msgid "use [PATCH] even with multiple patches"
msgstr "使用 [PATCH]，即使有多个补丁"
-#: builtin/log.c:1115
+#: builtin/log.c:1162
msgid "print patches to standard out"
msgstr "打印补丁到标准输出"
-#: builtin/log.c:1117
+#: builtin/log.c:1164
msgid "generate a cover letter"
msgstr "生成一封附信"
-#: builtin/log.c:1119
+#: builtin/log.c:1166
msgid "use simple number sequence for output file names"
msgstr "使用简单的数字序列作为输出文件名"
-#: builtin/log.c:1120
+#: builtin/log.c:1167
msgid "sfx"
msgstr "后缀"
-#: builtin/log.c:1121
+#: builtin/log.c:1168
msgid "use <sfx> instead of '.patch'"
msgstr "使用 <后缀> 代替 '.patch'"
-#: builtin/log.c:1123
+#: builtin/log.c:1170
msgid "start numbering patches at <n> instead of 1"
msgstr "补丁以 <n> 开始编号，而不是1"
-#: builtin/log.c:1125
+#: builtin/log.c:1172
msgid "mark the series as Nth re-roll"
msgstr "标记补丁系列是第几次重制"
-#: builtin/log.c:1127
+#: builtin/log.c:1174
msgid "Use [<prefix>] instead of [PATCH]"
msgstr "使用 [<前缀>] 代替 [PATCH]"
-#: builtin/log.c:1130
+#: builtin/log.c:1177
msgid "store resulting files in <dir>"
msgstr "把结果文件存储在 <dir>"
-#: builtin/log.c:1133
+#: builtin/log.c:1180
msgid "don't strip/add [PATCH]"
msgstr "不删除/添加 [PATCH]"
-#: builtin/log.c:1136
+#: builtin/log.c:1183
msgid "don't output binary diffs"
msgstr "不输出二进制差异"
-#: builtin/log.c:1138
+#: builtin/log.c:1185
msgid "don't include a patch matching a commit upstream"
msgstr "不包含已在上游提交中的补丁"
-#: builtin/log.c:1140
+#: builtin/log.c:1187
msgid "show patch format instead of default (patch + stat)"
msgstr "显示纯补丁格式而非默认的（补丁+状态）"
-#: builtin/log.c:1142
+#: builtin/log.c:1189
msgid "Messaging"
msgstr "邮件发送"
-#: builtin/log.c:1143
+#: builtin/log.c:1190
msgid "header"
msgstr "header"
-#: builtin/log.c:1144
+#: builtin/log.c:1191
msgid "add email header"
msgstr "添加邮件头"
-#: builtin/log.c:1145 builtin/log.c:1147
+#: builtin/log.c:1192 builtin/log.c:1194
msgid "email"
msgstr "邮件地址"
-#: builtin/log.c:1145
+#: builtin/log.c:1192
msgid "add To: header"
msgstr "添加收件人"
-#: builtin/log.c:1147
+#: builtin/log.c:1194
msgid "add Cc: header"
msgstr "添加抄送"
-#: builtin/log.c:1149
+#: builtin/log.c:1196
+msgid "ident"
+msgstr "ident"
+
+#: builtin/log.c:1197
+msgid "set From address to <ident> (or committer ident if absent)"
+msgstr "设置 From 地址为 <ident>（如若不提供，用提交者ID做为地址）"
+
+#: builtin/log.c:1199
msgid "message-id"
msgstr "message-id"
-#: builtin/log.c:1150
+#: builtin/log.c:1200
msgid "make first mail a reply to <message-id>"
msgstr "使第一封邮件作为对 <message-id> 的回复"
-#: builtin/log.c:1151 builtin/log.c:1154
+#: builtin/log.c:1201 builtin/log.c:1204
msgid "boundary"
msgstr "边界"
-#: builtin/log.c:1152
+#: builtin/log.c:1202
msgid "attach the patch"
msgstr "附件方式添加补丁"
-#: builtin/log.c:1155
+#: builtin/log.c:1205
msgid "inline the patch"
msgstr "内联显示补丁"
-#: builtin/log.c:1159
+#: builtin/log.c:1209
msgid "enable message threading, styles: shallow, deep"
msgstr "启用邮件线索，风格：浅，深"
-#: builtin/log.c:1161
+#: builtin/log.c:1211
msgid "signature"
msgstr "签名"
-#: builtin/log.c:1162
+#: builtin/log.c:1212
msgid "add a signature"
msgstr "添加一个签名"
-#: builtin/log.c:1164
+#: builtin/log.c:1214
msgid "don't print the patch filenames"
msgstr "不要打印补丁文件名"
-#: builtin/log.c:1248
+#: builtin/log.c:1288
+#, c-format
+msgid "invalid ident line: %s"
+msgstr "包含无效的身份标识：%s"
+
+#: builtin/log.c:1303
msgid "-n and -k are mutually exclusive."
msgstr "-n 和 -k 互斥。"
-#: builtin/log.c:1250
+#: builtin/log.c:1305
msgid "--subject-prefix and -k are mutually exclusive."
msgstr "--subject-prefix 和 -k 互斥。"
-#: builtin/log.c:1258
+#: builtin/log.c:1313
msgid "--name-only does not make sense"
msgstr "--name-only 无意义"
-#: builtin/log.c:1260
+#: builtin/log.c:1315
msgid "--name-status does not make sense"
msgstr "--name-status 无意义"
-#: builtin/log.c:1262
+#: builtin/log.c:1317
msgid "--check does not make sense"
msgstr "--check 无意义"
-#: builtin/log.c:1285
+#: builtin/log.c:1340
msgid "standard output, or directory, which one?"
msgstr "标准输出或目录，哪一个？"
-#: builtin/log.c:1287
+#: builtin/log.c:1342
#, c-format
msgid "Could not create directory '%s'"
msgstr "不能创建目录 '%s'"
-#: builtin/log.c:1435
+#: builtin/log.c:1490
msgid "Failed to create output files"
msgstr "无法创建输出文件"
-#: builtin/log.c:1484
+#: builtin/log.c:1539
msgid "git cherry [-v] [<upstream> [<head> [<limit>]]]"
msgstr "git cherry [-v] [<上游> [<头> [<限制>]]]"
-#: builtin/log.c:1539
+#: builtin/log.c:1594
#, c-format
msgid ""
"Could not find a tracked remote branch, please specify <upstream> manually.\n"
msgstr "不能找到跟踪的远程分支，请手工指定 <upstream>。\n"
-#: builtin/log.c:1552 builtin/log.c:1554 builtin/log.c:1566
+#: builtin/log.c:1607 builtin/log.c:1609 builtin/log.c:1621
#, c-format
msgid "Unknown commit %s"
msgstr "未知提交 %s"
-#: builtin/ls-files.c:402
+#: builtin/ls-files.c:408
msgid "git ls-files [options] [<file>...]"
msgstr "git ls-files [选项] [<文件>...]"
-#: builtin/ls-files.c:459
+#: builtin/ls-files.c:465
msgid "identify the file status with tags"
msgstr "用标签标识文件的状态"
-#: builtin/ls-files.c:461
+#: builtin/ls-files.c:467
msgid "use lowercase letters for 'assume unchanged' files"
msgstr "使用小写字母表示 '假设未改变的' 文件"
-#: builtin/ls-files.c:463
+#: builtin/ls-files.c:469
msgid "show cached files in the output (default)"
msgstr "显示缓存的文件（默认）"
-#: builtin/ls-files.c:465
+#: builtin/ls-files.c:471
msgid "show deleted files in the output"
msgstr "显示已删除的文件"
-#: builtin/ls-files.c:467
+#: builtin/ls-files.c:473
msgid "show modified files in the output"
msgstr "显示已修改的文件"
-#: builtin/ls-files.c:469
+#: builtin/ls-files.c:475
msgid "show other files in the output"
msgstr "显示其它文件"
-#: builtin/ls-files.c:471
+#: builtin/ls-files.c:477
msgid "show ignored files in the output"
msgstr "显示忽略的文件"
-#: builtin/ls-files.c:474
+#: builtin/ls-files.c:480
msgid "show staged contents' object name in the output"
msgstr "显示暂存区内容的对象名称"
-#: builtin/ls-files.c:476
+#: builtin/ls-files.c:482
msgid "show files on the filesystem that need to be removed"
msgstr "显示文件系统需要删除的文件"
-#: builtin/ls-files.c:478
+#: builtin/ls-files.c:484
msgid "show 'other' directories' name only"
msgstr "只显示“其他”目录的名称"
-#: builtin/ls-files.c:481
+#: builtin/ls-files.c:487
msgid "don't show empty directories"
msgstr "不显示空目录"
-#: builtin/ls-files.c:484
+#: builtin/ls-files.c:490
msgid "show unmerged files in the output"
msgstr "显示未合并的文件"
-#: builtin/ls-files.c:486
+#: builtin/ls-files.c:492
msgid "show resolve-undo information"
msgstr "显示 resolve-undo 信息"
-#: builtin/ls-files.c:488
+#: builtin/ls-files.c:494
msgid "skip files matching pattern"
msgstr "匹配排除文件的模式"
-#: builtin/ls-files.c:491
+#: builtin/ls-files.c:497
msgid "exclude patterns are read from <file>"
msgstr "从 <文件> 中读取排除模式"
-#: builtin/ls-files.c:494
+#: builtin/ls-files.c:500
msgid "read additional per-directory exclude patterns in <file>"
msgstr "从 <文件> 读取额外的每个目录的排除模式"
-#: builtin/ls-files.c:496
+#: builtin/ls-files.c:502
msgid "add the standard git exclusions"
msgstr "添加标准的 git 排除"
-#: builtin/ls-files.c:499
+#: builtin/ls-files.c:505
msgid "make the output relative to the project top directory"
msgstr "显示相对于顶级目录的文件名"
-#: builtin/ls-files.c:502
+#: builtin/ls-files.c:508
msgid "if any <file> is not in the index, treat this as an error"
msgstr "如果任何 <文件> 都不在索引区，视为错误"
-#: builtin/ls-files.c:503
+#: builtin/ls-files.c:509
msgid "tree-ish"
msgstr "树或提交"
-#: builtin/ls-files.c:504
+#: builtin/ls-files.c:510
msgid "pretend that paths removed since <tree-ish> are still present"
msgstr "假装自从 <树或提交> 之后删除的路径仍然存在"
-#: builtin/ls-files.c:506
+#: builtin/ls-files.c:512
msgid "show debugging data"
msgstr "显示调试数据"
msgid "git merge --abort"
msgstr "git merge --abort"
-#: builtin/merge.c:90
+#: builtin/merge.c:98
msgid "switch `m' requires a value"
msgstr "开关 `m' 需要一个值"
-#: builtin/merge.c:127
+#: builtin/merge.c:135
#, c-format
msgid "Could not find merge strategy '%s'.\n"
msgstr "不能找到合并策略 '%s'。\n"
-#: builtin/merge.c:128
+#: builtin/merge.c:136
#, c-format
msgid "Available strategies are:"
msgstr "可用的策略有："
-#: builtin/merge.c:133
+#: builtin/merge.c:141
#, c-format
msgid "Available custom strategies are:"
msgstr "可用的自定义策略有："
-#: builtin/merge.c:183
+#: builtin/merge.c:198
msgid "do not show a diffstat at the end of the merge"
msgstr "在合并的最后不显示差异统计"
-#: builtin/merge.c:186
+#: builtin/merge.c:201
msgid "show a diffstat at the end of the merge"
msgstr "在合并的最后显示差异统计"
-#: builtin/merge.c:187
+#: builtin/merge.c:202
msgid "(synonym to --stat)"
msgstr "（和 --stat 同义）"
-#: builtin/merge.c:189
+#: builtin/merge.c:204
msgid "add (at most <n>) entries from shortlog to merge commit message"
msgstr "在合并提交信息中添加（最多 <n> 条）精简提交记录"
-#: builtin/merge.c:192
+#: builtin/merge.c:207
msgid "create a single commit instead of doing a merge"
msgstr "创建一个单独的提交而不是做一次合并"
-#: builtin/merge.c:194
+#: builtin/merge.c:209
msgid "perform a commit if the merge succeeds (default)"
msgstr "如果合并成功，执行一次提交（默认）"
-#: builtin/merge.c:196
+#: builtin/merge.c:211
msgid "edit message before committing"
msgstr "在提交前编辑提交说明"
-#: builtin/merge.c:198
+#: builtin/merge.c:212
msgid "allow fast-forward (default)"
msgstr "允许快进（默认）"
-#: builtin/merge.c:200
+#: builtin/merge.c:214
msgid "abort if fast-forward is not possible"
msgstr "如果不能快进就放弃合并"
-#: builtin/merge.c:203
+#: builtin/merge.c:218
msgid "Verify that the named commit has a valid GPG signature"
msgstr "验证指定的提交是否包含一个有效的 GPG 签名"
-#: builtin/merge.c:204 builtin/notes.c:866 builtin/revert.c:112
+#: builtin/merge.c:219 builtin/notes.c:738 builtin/revert.c:114
msgid "strategy"
msgstr "策略"
-#: builtin/merge.c:205
+#: builtin/merge.c:220
msgid "merge strategy to use"
msgstr "要使用的合并策略"
-#: builtin/merge.c:206
+#: builtin/merge.c:221
msgid "option=value"
msgstr "option=value"
-#: builtin/merge.c:207
+#: builtin/merge.c:222
msgid "option for selected merge strategy"
msgstr "所选的合并策略的选项"
-#: builtin/merge.c:209
+#: builtin/merge.c:224
msgid "merge commit message (for a non-fast-forward merge)"
msgstr "合并的提交说明（针对非快进式合并）"
-#: builtin/merge.c:213
+#: builtin/merge.c:228
msgid "abort the current in-progress merge"
msgstr "放弃当前正在进行的合并"
-#: builtin/merge.c:242
+#: builtin/merge.c:257
msgid "could not run stash."
msgstr "不能进行进度保存。"
-#: builtin/merge.c:247
+#: builtin/merge.c:262
msgid "stash failed"
msgstr "进度保存失败"
-#: builtin/merge.c:252
+#: builtin/merge.c:267
#, c-format
msgid "not a valid object: %s"
msgstr "不是一个有效对象：%s"
-#: builtin/merge.c:271 builtin/merge.c:288
+#: builtin/merge.c:286 builtin/merge.c:303
msgid "read-tree failed"
msgstr "读取树失败"
# 译者：注意保持前导空格
-#: builtin/merge.c:318
+#: builtin/merge.c:333
msgid " (nothing to squash)"
msgstr " （无可压缩）"
-#: builtin/merge.c:331
+#: builtin/merge.c:346
#, c-format
msgid "Squash commit -- not updating HEAD\n"
msgstr "压缩提交 -- 未更新 HEAD\n"
-#: builtin/merge.c:363
+#: builtin/merge.c:378
msgid "Writing SQUASH_MSG"
msgstr "写入 SQUASH_MSG"
-#: builtin/merge.c:365
+#: builtin/merge.c:380
msgid "Finishing SQUASH_MSG"
msgstr "完成 SQUASH_MSG"
-#: builtin/merge.c:388
+#: builtin/merge.c:403
#, c-format
msgid "No merge message -- not updating HEAD\n"
msgstr "无合并信息 -- 未更新 HEAD\n"
-#: builtin/merge.c:438
+#: builtin/merge.c:453
#, c-format
msgid "'%s' does not point to a commit"
msgstr "'%s' 没有指向一个提交"
-#: builtin/merge.c:550
+#: builtin/merge.c:565
#, c-format
msgid "Bad branch.%s.mergeoptions string: %s"
msgstr "坏的 branch.%s.mergeoptions 字符串：%s"
-#: builtin/merge.c:643
+#: builtin/merge.c:657
msgid "git write-tree failed to write a tree"
msgstr "git write-tree 无法写入一树对象"
-#: builtin/merge.c:671
+#: builtin/merge.c:685
msgid "Not handling anything other than two heads merge."
msgstr "不能处理两个头合并之外的任何操作。"
-#: builtin/merge.c:685
+#: builtin/merge.c:699
#, c-format
msgid "Unknown option for merge-recursive: -X%s"
msgstr "merge-recursive 的未知选项：-X%s"
-#: builtin/merge.c:699
+#: builtin/merge.c:713
#, c-format
msgid "unable to write %s"
msgstr "不能写 %s"
-#: builtin/merge.c:788
+#: builtin/merge.c:802
#, c-format
msgid "Could not read from '%s'"
msgstr "不能从 '%s' 读取"
-#: builtin/merge.c:797
+#: builtin/merge.c:811
#, c-format
msgid "Not committing merge; use 'git commit' to complete the merge.\n"
msgstr "未提交合并，使用 'git commit' 完成此次合并。\n"
-#: builtin/merge.c:803
+#: builtin/merge.c:817
#, c-format
msgid ""
"Please enter a commit message to explain why this merge is necessary,\n"
"\n"
"以 '%c' 开头的行将被忽略，而且空提交说明将会终止提交。\n"
-#: builtin/merge.c:827
+#: builtin/merge.c:841
msgid "Empty commit message."
msgstr "空提交信息。"
-#: builtin/merge.c:839
+#: builtin/merge.c:853
#, c-format
msgid "Wonderful.\n"
msgstr "太棒了。\n"
-#: builtin/merge.c:904
+#: builtin/merge.c:918
#, c-format
msgid "Automatic merge failed; fix conflicts and then commit the result.\n"
msgstr "自动合并失败，修正冲突然后提交修正的结果。\n"
-#: builtin/merge.c:920
+#: builtin/merge.c:934
#, c-format
msgid "'%s' is not a commit"
msgstr "'%s' 不是一个提交"
-#: builtin/merge.c:961
+#: builtin/merge.c:975
msgid "No current branch."
msgstr "没有当前分支。"
-#: builtin/merge.c:963
+#: builtin/merge.c:977
msgid "No remote for the current branch."
msgstr "当前分支没有对应的远程版本库。"
-#: builtin/merge.c:965
+#: builtin/merge.c:979
msgid "No default upstream defined for the current branch."
msgstr "当前分支没有定义默认的上游分支。"
-#: builtin/merge.c:970
+#: builtin/merge.c:984
#, c-format
-msgid "No remote tracking branch for %s from %s"
-msgstr "%s 没有来自 %s 的远程跟踪分支"
+msgid "No remote-tracking branch for %s from %s"
+msgstr "对于 %s 没有来自 %s 的远程跟踪分支"
-#: builtin/merge.c:1057 builtin/merge.c:1214
-#, c-format
-msgid "%s - not something we can merge"
-msgstr "%s - 不能被合并"
-
-#: builtin/merge.c:1125
+#: builtin/merge.c:1140
msgid "There is no merge to abort (MERGE_HEAD missing)."
msgstr "没有要终止的合并（MERGE_HEAD 丢失）。"
-#: builtin/merge.c:1141 git-pull.sh:31
+#: builtin/merge.c:1156 git-pull.sh:31
msgid ""
"You have not concluded your merge (MERGE_HEAD exists).\n"
"Please, commit your changes before you can merge."
"您尚未结束您的合并（存在 MERGE_HEAD）。\n"
"请在合并前先提交您的修改。"
-#: builtin/merge.c:1144 git-pull.sh:34
+#: builtin/merge.c:1159 git-pull.sh:34
msgid "You have not concluded your merge (MERGE_HEAD exists)."
msgstr "您尚未结束您的合并（存在 MERGE_HEAD）。"
-#: builtin/merge.c:1148
+#: builtin/merge.c:1163
msgid ""
"You have not concluded your cherry-pick (CHERRY_PICK_HEAD exists).\n"
"Please, commit your changes before you can merge."
"您尚未结束您的拣选（存在 CHERRY_PICK_HEAD）。\n"
"请在合并前先提交您的修改。"
-#: builtin/merge.c:1151
+#: builtin/merge.c:1166
msgid "You have not concluded your cherry-pick (CHERRY_PICK_HEAD exists)."
msgstr "您尚未结束您的拣选（存在 CHERRY_PICK_HEAD）。"
-#: builtin/merge.c:1160
+#: builtin/merge.c:1175
msgid "You cannot combine --squash with --no-ff."
msgstr "您不能将 --squash 与 --no-ff 同时使用。"
-#: builtin/merge.c:1165
-msgid "You cannot combine --no-ff with --ff-only."
-msgstr "您不能将 --no-ff 与 --ff-only 同时使用。"
-
-#: builtin/merge.c:1172
+#: builtin/merge.c:1184
msgid "No commit specified and merge.defaultToUpstream not set."
msgstr "未指定提交并且 merge.defaultToUpstream 未设置。"
-#: builtin/merge.c:1204
+#: builtin/merge.c:1216
msgid "Can merge only exactly one commit into empty head"
msgstr "只能将一个提交合并到空分支上"
-#: builtin/merge.c:1207
+#: builtin/merge.c:1219
msgid "Squash commit into empty head not supported yet"
msgstr "尚不支持到空分支的压缩提交"
-#: builtin/merge.c:1209
+#: builtin/merge.c:1221
msgid "Non-fast-forward commit does not make sense into an empty head"
msgstr "到空分支的非快进式提交没有意义"
-#: builtin/merge.c:1265
+#: builtin/merge.c:1226
+#, c-format
+msgid "%s - not something we can merge"
+msgstr "%s - 不能被合并"
+
+#: builtin/merge.c:1277
#, c-format
msgid "Commit %s has an untrusted GPG signature, allegedly by %s."
msgstr "提交 %s 有一个非可信的声称来自 %s 的 GPG 签名。"
-#: builtin/merge.c:1268
+#: builtin/merge.c:1280
#, c-format
msgid "Commit %s has a bad GPG signature allegedly by %s."
msgstr "提交 %s 有一个错误的声称来自 %s 的 GPG 签名。"
#. 'N'
-#: builtin/merge.c:1271
+#: builtin/merge.c:1283
#, c-format
msgid "Commit %s does not have a GPG signature."
msgstr "提交 %s 没有一个 GPG 签名。"
-#: builtin/merge.c:1274
+#: builtin/merge.c:1286
#, c-format
msgid "Commit %s has a good GPG signature by %s\n"
msgstr "提交 %s 有一个来自 %s 的好的 GPG 签名。\n"
-#: builtin/merge.c:1358
+#: builtin/merge.c:1370
#, c-format
msgid "Updating %s..%s\n"
msgstr "更新 %s..%s\n"
-#: builtin/merge.c:1397
+#: builtin/merge.c:1409
#, c-format
msgid "Trying really trivial in-index merge...\n"
msgstr "尝试非常小的索引内合并...\n"
-#: builtin/merge.c:1404
+#: builtin/merge.c:1416
#, c-format
msgid "Nope.\n"
msgstr "无。\n"
-#: builtin/merge.c:1436
+#: builtin/merge.c:1448
msgid "Not possible to fast-forward, aborting."
msgstr "无法快进，终止。"
-#: builtin/merge.c:1459 builtin/merge.c:1538
+#: builtin/merge.c:1471 builtin/merge.c:1550
#, c-format
msgid "Rewinding the tree to pristine...\n"
msgstr "将树回滚至原始状态...\n"
-#: builtin/merge.c:1463
+#: builtin/merge.c:1475
#, c-format
msgid "Trying merge strategy %s...\n"
msgstr "尝试合并策略 %s...\n"
-#: builtin/merge.c:1529
+#: builtin/merge.c:1541
#, c-format
msgid "No merge strategy handled the merge.\n"
msgstr "没有合并策略处理此合并。\n"
-#: builtin/merge.c:1531
+#: builtin/merge.c:1543
#, c-format
msgid "Merge with strategy %s failed.\n"
msgstr "使用策略 %s 合并失败。\n"
-#: builtin/merge.c:1540
+#: builtin/merge.c:1552
#, c-format
msgid "Using the %s to prepare resolving by hand.\n"
msgstr "使用 %s 以准备手工解决。\n"
-#: builtin/merge.c:1552
+#: builtin/merge.c:1564
#, c-format
msgid "Automatic merge went well; stopped before committing as requested\n"
msgstr "自动合并进展顺利，按要求在提交前停止\n"
msgid "renaming '%s' failed"
msgstr "重命名 '%s' 失败"
-#: builtin/name-rev.c:175
+#: builtin/name-rev.c:259
msgid "git name-rev [options] <commit>..."
msgstr "git name-rev [选项] <提交>..."
-#: builtin/name-rev.c:176
+#: builtin/name-rev.c:260
msgid "git name-rev [options] --all"
msgstr "git name-rev [选项] --all"
-#: builtin/name-rev.c:177
+#: builtin/name-rev.c:261
msgid "git name-rev [options] --stdin"
msgstr "git name-rev [选项] --stdin"
-#: builtin/name-rev.c:229
+#: builtin/name-rev.c:313
msgid "print only names (no SHA-1)"
msgstr "只打印名称（无 SHA-1）"
-#: builtin/name-rev.c:230
+#: builtin/name-rev.c:314
msgid "only use tags to name the commits"
msgstr "只使用 tags 来命名提交"
-#: builtin/name-rev.c:232
+#: builtin/name-rev.c:316
msgid "only use refs matching <pattern>"
msgstr "只使用和 <模式> 相匹配的引用"
-#: builtin/name-rev.c:234
+#: builtin/name-rev.c:318
msgid "list all commits reachable from all refs"
msgstr "列出可以从所有引用访问的提交"
-#: builtin/name-rev.c:235
+#: builtin/name-rev.c:319
msgid "read from stdin"
msgstr "从标准输入读取"
-#: builtin/name-rev.c:236
+#: builtin/name-rev.c:320
msgid "allow to print `undefined` names"
msgstr "允许打印 `未定义` 的名称"
-#: builtin/notes.c:26
+#: builtin/name-rev.c:326
+msgid "dereference tags in the input (internal use)"
+msgstr "反向解析输入中的 tags（内部使用）"
+
+#: builtin/notes.c:24
msgid "git notes [--ref <notes_ref>] [list [<object>]]"
msgstr "git notes [--ref <注解引用>] [list [<对象>]]"
-#: builtin/notes.c:27
+#: builtin/notes.c:25
msgid ""
"git notes [--ref <notes_ref>] add [-f] [-m <msg> | -F <file> | (-c | -C) "
"<object>] [<object>]"
"git notes [--ref <注解引用>] add [-f] [-m <说明> | -F <文件> | (-c | -C) <对"
"象>] [<对象>]"
-#: builtin/notes.c:28
+#: builtin/notes.c:26
msgid "git notes [--ref <notes_ref>] copy [-f] <from-object> <to-object>"
msgstr "git notes [--ref <注解引用>] copy [-f] <源对象> <目标对象>"
-#: builtin/notes.c:29
+#: builtin/notes.c:27
msgid ""
"git notes [--ref <notes_ref>] append [-m <msg> | -F <file> | (-c | -C) "
"<object>] [<object>]"
"git notes [--ref <注解引用>] append [-m <说明> | -F <文件> | (-c | -C) <对象"
">] [<对象>]"
-#: builtin/notes.c:30
+#: builtin/notes.c:28
msgid "git notes [--ref <notes_ref>] edit [<object>]"
msgstr "git notes [--ref <注解引用>] edit [<对象>]"
-#: builtin/notes.c:31
+#: builtin/notes.c:29
msgid "git notes [--ref <notes_ref>] show [<object>]"
msgstr "git notes [--ref <注解引用>] show [<对象>]"
-#: builtin/notes.c:32
+#: builtin/notes.c:30
msgid ""
"git notes [--ref <notes_ref>] merge [-v | -q] [-s <strategy> ] <notes_ref>"
msgstr "git notes [--ref <注解引用>] merge [-v | -q] [-s <策略> ] <注解引用>"
-#: builtin/notes.c:33
+#: builtin/notes.c:31
msgid "git notes merge --commit [-v | -q]"
msgstr "git notes merge --commit [-v | -q]"
-#: builtin/notes.c:34
+#: builtin/notes.c:32
msgid "git notes merge --abort [-v | -q]"
msgstr "git notes merge --abort [-v | -q]"
-#: builtin/notes.c:35
+#: builtin/notes.c:33
msgid "git notes [--ref <notes_ref>] remove [<object>...]"
msgstr "git notes [--ref <注解引用>] remove [<对象>...]"
-#: builtin/notes.c:36
+#: builtin/notes.c:34
msgid "git notes [--ref <notes_ref>] prune [-n | -v]"
msgstr "git notes [--ref <注解引用>] prune [-n | -v]"
-#: builtin/notes.c:37
+#: builtin/notes.c:35
msgid "git notes [--ref <notes_ref>] get-ref"
msgstr "git notes [--ref <注解引用>] get-ref"
-#: builtin/notes.c:42
+#: builtin/notes.c:40
msgid "git notes [list [<object>]]"
msgstr "git notes [list [<对象>]]"
-#: builtin/notes.c:47
+#: builtin/notes.c:45
msgid "git notes add [<options>] [<object>]"
msgstr "git notes add [<选项>] [<对象>]"
-#: builtin/notes.c:52
+#: builtin/notes.c:50
msgid "git notes copy [<options>] <from-object> <to-object>"
msgstr "git notes copy [<选项>] <源对象> <目标对象>"
-#: builtin/notes.c:53
+#: builtin/notes.c:51
msgid "git notes copy --stdin [<from-object> <to-object>]..."
msgstr "git notes copy --stdin [<源对象> <目标对象>]..."
-#: builtin/notes.c:58
+#: builtin/notes.c:56
msgid "git notes append [<options>] [<object>]"
msgstr "git notes append [<选项>] [<对象>]"
-#: builtin/notes.c:63
+#: builtin/notes.c:61
msgid "git notes edit [<object>]"
msgstr "git notes edit [<对象>]"
-#: builtin/notes.c:68
+#: builtin/notes.c:66
msgid "git notes show [<object>]"
msgstr "git notes show [<对象>]"
-#: builtin/notes.c:73
+#: builtin/notes.c:71
msgid "git notes merge [<options>] <notes_ref>"
msgstr "git notes merge [<选项>] <注解引用>"
-#: builtin/notes.c:74
+#: builtin/notes.c:72
msgid "git notes merge --commit [<options>]"
msgstr "git notes merge --commit [<选项>]"
-#: builtin/notes.c:75
+#: builtin/notes.c:73
msgid "git notes merge --abort [<options>]"
msgstr "git notes merge --abort [<选项>]"
-#: builtin/notes.c:80
+#: builtin/notes.c:78
msgid "git notes remove [<object>]"
msgstr "git notes remove [<对象>]"
-#: builtin/notes.c:85
+#: builtin/notes.c:83
msgid "git notes prune [<options>]"
msgstr "git notes prune [<选项>]"
-#: builtin/notes.c:90
+#: builtin/notes.c:88
msgid "git notes get-ref"
msgstr "git notes get-ref"
-#: builtin/notes.c:139
+#: builtin/notes.c:137
#, c-format
msgid "unable to start 'show' for object '%s'"
msgstr "不能为对象 '%s' 开始 'show'"
-#: builtin/notes.c:143
+#: builtin/notes.c:141
msgid "could not read 'show' output"
msgstr "不能读取 'show' 的输出"
-#: builtin/notes.c:151
+#: builtin/notes.c:149
#, c-format
msgid "failed to finish 'show' for object '%s'"
msgstr "无法为对象 '%s' 完成 'show'"
-#: builtin/notes.c:169 builtin/tag.c:341
+#: builtin/notes.c:167 builtin/tag.c:341
#, c-format
msgid "could not create file '%s'"
msgstr "不能创建文件 '%s'"
-#: builtin/notes.c:188
+#: builtin/notes.c:186
msgid "Please supply the note contents using either -m or -F option"
msgstr "请通过 -m 或 -F 选项为注解提供内容"
-#: builtin/notes.c:209 builtin/notes.c:972
+#: builtin/notes.c:207 builtin/notes.c:844
#, c-format
msgid "Removing note for object %s\n"
msgstr "删除对象 %s 的注解\n"
-#: builtin/notes.c:214
+#: builtin/notes.c:212
msgid "unable to write note object"
msgstr "不能写注解对象"
-#: builtin/notes.c:216
+#: builtin/notes.c:214
#, c-format
msgid "The note contents has been left in %s"
msgstr "注解内容被留在文件 %s 中"
-#: builtin/notes.c:250 builtin/tag.c:540
+#: builtin/notes.c:248 builtin/tag.c:540
#, c-format
msgid "cannot read '%s'"
msgstr "不能读取 '%s'"
-#: builtin/notes.c:252 builtin/tag.c:543
+#: builtin/notes.c:250 builtin/tag.c:543
#, c-format
msgid "could not open or read '%s'"
msgstr "不能打开或读取 '%s'"
-#: builtin/notes.c:271 builtin/notes.c:444 builtin/notes.c:446
-#: builtin/notes.c:506 builtin/notes.c:560 builtin/notes.c:643
-#: builtin/notes.c:648 builtin/notes.c:723 builtin/notes.c:765
-#: builtin/notes.c:967 builtin/tag.c:556
+#: builtin/notes.c:269 builtin/notes.c:316 builtin/notes.c:318
+#: builtin/notes.c:378 builtin/notes.c:432 builtin/notes.c:515
+#: builtin/notes.c:520 builtin/notes.c:595 builtin/notes.c:637
+#: builtin/notes.c:839 builtin/tag.c:556
#, c-format
msgid "Failed to resolve '%s' as a valid ref."
msgstr "无法解析 '%s' 为一个有效引用。"
-#: builtin/notes.c:274
+#: builtin/notes.c:272
#, c-format
msgid "Failed to read object '%s'."
msgstr "无法读取对象 '%s'。"
-#: builtin/notes.c:298
-msgid "Cannot commit uninitialized/unreferenced notes tree"
-msgstr "不能提交未初始化/未引用的注解树"
-
-#: builtin/notes.c:339
-#, c-format
-msgid "Bad notes.rewriteMode value: '%s'"
-msgstr "坏的 notes.rewriteMode 值：'%s'"
-
-#: builtin/notes.c:349
-#, c-format
-msgid "Refusing to rewrite notes in %s (outside of refs/notes/)"
-msgstr "拒绝向 %s（在 refs/notes/ 之外）写入注解"
-
-#. TRANSLATORS: The first %s is the name of the
-#. environment variable, the second %s is its value
-#: builtin/notes.c:376
-#, c-format
-msgid "Bad %s value: '%s'"
-msgstr "坏的 %s 值：'%s'"
-
-#: builtin/notes.c:440
+#: builtin/notes.c:312
#, c-format
msgid "Malformed input line: '%s'."
msgstr "非法的输入行：'%s'。"
-#: builtin/notes.c:455
+#: builtin/notes.c:327
#, c-format
msgid "Failed to copy notes from '%s' to '%s'"
msgstr "无法从 '%s' 到 '%s' 拷贝注解"
-#: builtin/notes.c:499 builtin/notes.c:553 builtin/notes.c:626
-#: builtin/notes.c:638 builtin/notes.c:711 builtin/notes.c:758
-#: builtin/notes.c:1032
+#: builtin/notes.c:371 builtin/notes.c:425 builtin/notes.c:498
+#: builtin/notes.c:510 builtin/notes.c:583 builtin/notes.c:630
+#: builtin/notes.c:904
msgid "too many parameters"
msgstr "参数太多"
-#: builtin/notes.c:512 builtin/notes.c:771
+#: builtin/notes.c:384 builtin/notes.c:643
#, c-format
msgid "No note found for object %s."
msgstr "未发现对象 %s 的注解。"
-#: builtin/notes.c:534 builtin/notes.c:691
+#: builtin/notes.c:406 builtin/notes.c:563
msgid "note contents as a string"
msgstr "注解内容作为一个字符串"
-#: builtin/notes.c:537 builtin/notes.c:694
+#: builtin/notes.c:409 builtin/notes.c:566
msgid "note contents in a file"
msgstr "注解内容到一个文件中"
-#: builtin/notes.c:539 builtin/notes.c:542 builtin/notes.c:696
-#: builtin/notes.c:699 builtin/tag.c:474
+#: builtin/notes.c:411 builtin/notes.c:414 builtin/notes.c:568
+#: builtin/notes.c:571 builtin/tag.c:474
msgid "object"
msgstr "对象"
-#: builtin/notes.c:540 builtin/notes.c:697
+#: builtin/notes.c:412 builtin/notes.c:569
msgid "reuse and edit specified note object"
msgstr "重用和编辑指定的注解对象"
-#: builtin/notes.c:543 builtin/notes.c:700
+#: builtin/notes.c:415 builtin/notes.c:572
msgid "reuse specified note object"
msgstr "重用指定的注解对象"
-#: builtin/notes.c:545 builtin/notes.c:613
+#: builtin/notes.c:417 builtin/notes.c:485
msgid "replace existing notes"
msgstr "替换已存在的注解"
-#: builtin/notes.c:579
+#: builtin/notes.c:451
#, c-format
msgid ""
"Cannot add notes. Found existing notes for object %s. Use '-f' to overwrite "
"existing notes"
msgstr "不能添加注解。发现对象 %s 已存在注解。使用 '-f' 覆盖现存注解"
-#: builtin/notes.c:584 builtin/notes.c:661
+#: builtin/notes.c:456 builtin/notes.c:533
#, c-format
msgid "Overwriting existing notes for object %s\n"
msgstr "覆盖对象 %s 现存注解\n"
-#: builtin/notes.c:614
+#: builtin/notes.c:486
msgid "read objects from stdin"
msgstr "从标准输入读取对象"
-#: builtin/notes.c:616
+#: builtin/notes.c:488
msgid "load rewriting config for <command> (implies --stdin)"
msgstr "重新加载 <命令> 的配置（隐含 --stdin）"
-#: builtin/notes.c:634
+#: builtin/notes.c:506
msgid "too few parameters"
msgstr "参数太少"
-#: builtin/notes.c:655
+#: builtin/notes.c:527
#, c-format
msgid ""
"Cannot copy notes. Found existing notes for object %s. Use '-f' to overwrite "
"existing notes"
msgstr "不能拷贝注解。发现对象 %s 已存在注解。使用 '-f' 覆盖现存注解"
-#: builtin/notes.c:667
+#: builtin/notes.c:539
#, c-format
msgid "Missing notes on source object %s. Cannot copy."
msgstr "源对象 %s 缺少注解。不能拷贝。"
-#: builtin/notes.c:716
+#: builtin/notes.c:588
#, c-format
msgid ""
"The -m/-F/-c/-C options have been deprecated for the 'edit' subcommand.\n"
"子命令 'edit' 的选项 -m/-F/-c/-C 已弃用。\n"
"请换用 'git notes add -f -m/-F/-c/-C'。\n"
-#: builtin/notes.c:863
+#: builtin/notes.c:735
msgid "General options"
msgstr "通用选项"
-#: builtin/notes.c:865
+#: builtin/notes.c:737
msgid "Merge options"
msgstr "合并选项"
-#: builtin/notes.c:867
+#: builtin/notes.c:739
msgid ""
"resolve notes conflicts using the given strategy (manual/ours/theirs/union/"
"cat_sort_uniq)"
msgstr "使用指定的策略解决注解冲突 (manual/ours/theirs/union/cat_sort_uniq)"
-#: builtin/notes.c:869
+#: builtin/notes.c:741
msgid "Committing unmerged notes"
msgstr "提交未合并的注解"
-#: builtin/notes.c:871
+#: builtin/notes.c:743
msgid "finalize notes merge by committing unmerged notes"
msgstr "通过提交未合并的注解来完成注解合并"
-#: builtin/notes.c:873
+#: builtin/notes.c:745
msgid "Aborting notes merge resolution"
msgstr "中止注解合并的方案"
-#: builtin/notes.c:875
+#: builtin/notes.c:747
msgid "abort notes merge"
msgstr "中止注解合并"
-#: builtin/notes.c:970
+#: builtin/notes.c:842
#, c-format
msgid "Object %s has no note\n"
msgstr "对象 %s 没有注解\n"
-#: builtin/notes.c:982
+#: builtin/notes.c:854
msgid "attempt to remove non-existent note is not an error"
msgstr "尝试删除不存在的注解不是一个错误"
-#: builtin/notes.c:985
+#: builtin/notes.c:857
msgid "read object names from the standard input"
msgstr "从标准输入读取对象名称"
-#: builtin/notes.c:1066
+#: builtin/notes.c:938
msgid "notes_ref"
msgstr "注解引用"
-#: builtin/notes.c:1067
+#: builtin/notes.c:939
msgid "use notes from <notes_ref>"
msgstr "从 <注解引用> 使用注解"
-#: builtin/notes.c:1102 builtin/remote.c:1598
+#: builtin/notes.c:974 builtin/remote.c:1598
#, c-format
msgid "Unknown subcommand: %s"
msgstr "未知子命令：%s"
" git push %s %s\n"
"%s"
-#: builtin/push.c:121
+#: builtin/push.c:117
#, c-format
msgid ""
"You are not currently on a branch.\n"
"\n"
" git push %s HEAD:<name-of-remote-branch>\n"
-#: builtin/push.c:128
+#: builtin/push.c:131
#, c-format
msgid ""
"The current branch %s has no upstream branch.\n"
"\n"
" git push --set-upstream %s %s\n"
-#: builtin/push.c:136
+#: builtin/push.c:139
#, c-format
msgid "The current branch %s has multiple upstream branches, refusing to push."
msgstr "当前分支 %s 有多个上游分支，拒绝推送。"
-#: builtin/push.c:139
+#: builtin/push.c:142
#, c-format
msgid ""
"You are pushing to remote '%s', which is not the upstream of\n"
"而没有告诉我要推送什么、更新哪个远程分支。"
# 译者：字符串首行行首要添加“warning: ”字串，故此首行要较其余行短
-#: builtin/push.c:151
+#: builtin/push.c:165
msgid ""
"push.default is unset; its implicit value is changing in\n"
"Git 2.0 from 'matching' to 'simple'. To squelch this message\n"
"（'simple' 模式由 Git 1.7.11 版本引入。如果您有时要使用老版本的 Git，\n"
"为保持兼容，请用 'current' 代替 'simple' 模式）"
-#: builtin/push.c:199
+#: builtin/push.c:225
msgid ""
"You didn't specify any refspecs to push, and push.default is \"nothing\"."
msgstr "您没有为推送指定任何引用表达式，并且 push.default 为 \"nothing\"。"
-#: builtin/push.c:206
+#: builtin/push.c:232
msgid ""
"Updates were rejected because the tip of your current branch is behind\n"
-"its remote counterpart. Merge the remote changes (e.g. 'git pull')\n"
-"before pushing again.\n"
+"its remote counterpart. Integrate the remote changes (e.g.\n"
+"'git pull ...') before pushing again.\n"
"See the 'Note about fast-forwards' in 'git push --help' for details."
msgstr ""
"更新被拒绝，因为您当前分支的最新提交落后于其对应的远程分支。\n"
-"再次推送前，先与远程变更合并（如 'git pull'）。详见\n"
+"再次推送前，先与远程变更合并（如 'git pull ...'）。详见\n"
"'git push --help' 中的 'Note about fast-forwards' 小节。"
-#: builtin/push.c:212
+#: builtin/push.c:238
msgid ""
"Updates were rejected because a pushed branch tip is behind its remote\n"
"counterpart. If you did not intend to push that branch, you may want to\n"
"配置变量 'push.default' 设置为 'simple'、'current' 或 'upstream'\n"
"以便只推送当前分支。"
-#: builtin/push.c:218
+#: builtin/push.c:244
msgid ""
"Updates were rejected because a pushed branch tip is behind its remote\n"
-"counterpart. Check out this branch and merge the remote changes\n"
-"(e.g. 'git pull') before pushing again.\n"
+"counterpart. Check out this branch and integrate the remote changes\n"
+"(e.g. 'git pull ...') before pushing again.\n"
"See the 'Note about fast-forwards' in 'git push --help' for details."
msgstr ""
"更新被拒绝，因为推送的一个分支的最新提交落后于其对应的远程分支。\n"
-"检出该分支并与远程变更合并（如 'git pull'），然后再推送。详见\n"
+"检出该分支并整合远程变更（如 'git pull ...'），然后再推送。详见\n"
"'git push --help' 中的 'Note about fast-forwards' 小节。"
-#: builtin/push.c:224
+#: builtin/push.c:250
msgid ""
"Updates were rejected because the remote contains work that you do\n"
"not have locally. This is usually caused by another repository pushing\n"
-"to the same ref. You may want to first merge the remote changes (e.g.,\n"
-"'git pull') before pushing again.\n"
+"to the same ref. You may want to first integrate the remote changes\n"
+"(e.g., 'git pull ...') before pushing again.\n"
"See the 'Note about fast-forwards' in 'git push --help' for details."
msgstr ""
"更新被拒绝，因为远程版本库包含您本地尚不存在的提交。这通常是因为另外\n"
-"一个版本库已推送了相同的引用。再次推送前，您可能需要先合并远程变更\n"
-"（如 'git pull'）。\n"
+"一个版本库已向该引用进行了推送。再次推送前，您可能需要先整合远程变更\n"
+"（如 'git pull ...'）。\n"
"详见 'git push --help' 中的 'Note about fast-forwards' 小节。"
-#: builtin/push.c:231
+#: builtin/push.c:257
msgid "Updates were rejected because the tag already exists in the remote."
msgstr "更新被拒绝因为 tag 在远程已经存在。"
-#: builtin/push.c:234
+#: builtin/push.c:260
msgid ""
"You cannot update a remote ref that points at a non-commit object,\n"
"or update a remote ref to make it point at a non-commit object,\n"
"如果不使用 '--force' 参数，您不能更新一个指向非提交对象的远程引用，\n"
"也不能更新远程引用让其指向一个非提交对象。\n"
-#: builtin/push.c:294
+#: builtin/push.c:320
#, c-format
msgid "Pushing to %s\n"
msgstr "推送到 %s\n"
-#: builtin/push.c:298
+#: builtin/push.c:324
#, c-format
msgid "failed to push some refs to '%s'"
msgstr "无法推送一些引用到 '%s'"
-#: builtin/push.c:331
+#: builtin/push.c:357
#, c-format
msgid "bad repository '%s'"
msgstr "坏的版本库 '%s'"
-#: builtin/push.c:332
+#: builtin/push.c:358
msgid ""
"No configured push destination.\n"
"Either specify the URL from the command-line or configure a remote "
"\n"
" git push <name>\n"
-#: builtin/push.c:347
+#: builtin/push.c:373
msgid "--all and --tags are incompatible"
msgstr "--all 和 --tags 不兼容"
-#: builtin/push.c:348
+#: builtin/push.c:374
msgid "--all can't be combined with refspecs"
msgstr "--all 不能和引用表达式同时使用"
-#: builtin/push.c:353
+#: builtin/push.c:379
msgid "--mirror and --tags are incompatible"
msgstr "--mirror 和 --tags 不兼容"
-#: builtin/push.c:354
+#: builtin/push.c:380
msgid "--mirror can't be combined with refspecs"
msgstr "--mirror 不能和引用表达式同时使用"
-#: builtin/push.c:359
+#: builtin/push.c:385
msgid "--all and --mirror are incompatible"
msgstr "--all 和 --mirror 不兼容"
-#: builtin/push.c:419
+#: builtin/push.c:445
msgid "repository"
msgstr "版本库"
-#: builtin/push.c:420
+#: builtin/push.c:446
msgid "push all refs"
msgstr "推送所有引用"
-#: builtin/push.c:421
+#: builtin/push.c:447
msgid "mirror all refs"
msgstr "镜像所有引用"
-#: builtin/push.c:423
+#: builtin/push.c:449
msgid "delete refs"
msgstr "删除引用"
-#: builtin/push.c:424
+#: builtin/push.c:450
msgid "push tags (can't be used with --all or --mirror)"
msgstr "推送 tags（不能使用 --all or --mirror）"
-#: builtin/push.c:427
+#: builtin/push.c:453
msgid "force updates"
msgstr "强制更新"
-#: builtin/push.c:428
+#: builtin/push.c:454
msgid "check"
msgstr "检查"
-#: builtin/push.c:429
+#: builtin/push.c:455
msgid "control recursive pushing of submodules"
msgstr "控制子模组的递归推送"
-#: builtin/push.c:431
+#: builtin/push.c:457
msgid "use thin pack"
msgstr "使用精简打包"
-#: builtin/push.c:432 builtin/push.c:433
+#: builtin/push.c:458 builtin/push.c:459
msgid "receive pack program"
msgstr "接收包程序"
-#: builtin/push.c:434
+#: builtin/push.c:460
msgid "set upstream for git pull/status"
msgstr "设置 git pull/status 的上游"
-#: builtin/push.c:437
+#: builtin/push.c:463
msgid "prune locally removed refs"
msgstr "清除本地删除的引用"
-#: builtin/push.c:439
+#: builtin/push.c:465
msgid "bypass pre-push hook"
msgstr "绕过 pre-push 钩子"
-#: builtin/push.c:440
+#: builtin/push.c:466
msgid "push missing but relevant tags"
msgstr "推送缺失的有关的 tags"
-#: builtin/push.c:450
+#: builtin/push.c:476
msgid "--delete is incompatible with --all, --mirror and --tags"
msgstr "--delete 与 --all、--mirror 及 --tags 不兼容"
-#: builtin/push.c:452
+#: builtin/push.c:478
msgid "--delete doesn't make sense without any refs"
msgstr "--delete 未接任何引用没有意义"
"u [--exclude-per-directory=<gitignore>] | -i]] [--no-sparse-checkout] [--"
"index-output=<文件>] (--empty | <树或提交1> [<树或提交2> [<树或提交3>]])"
-#: builtin/read-tree.c:108
+#: builtin/read-tree.c:109
msgid "write resulting index to <file>"
msgstr "将索引结果写入 <file>"
-#: builtin/read-tree.c:111
+#: builtin/read-tree.c:112
msgid "only empty the index"
msgstr "只是清空索引"
-#: builtin/read-tree.c:113
+#: builtin/read-tree.c:114
msgid "Merging"
msgstr "合并"
-#: builtin/read-tree.c:115
+#: builtin/read-tree.c:116
msgid "perform a merge in addition to a read"
msgstr "读取之余再执行一个合并"
-#: builtin/read-tree.c:117
+#: builtin/read-tree.c:118
msgid "3-way merge if no file level merging required"
msgstr "如果没有文件级合并需要，执行三路合并"
-#: builtin/read-tree.c:119
+#: builtin/read-tree.c:120
msgid "3-way merge in presence of adds and removes"
msgstr "存在添加和删除时，也执行三路合并"
-#: builtin/read-tree.c:121
+#: builtin/read-tree.c:122
msgid "same as -m, but discard unmerged entries"
msgstr "类似于 -m，但丢弃未合并的条目"
-#: builtin/read-tree.c:122
+#: builtin/read-tree.c:123
msgid "<subdirectory>/"
msgstr "<子目录>/"
-#: builtin/read-tree.c:123
+#: builtin/read-tree.c:124
msgid "read the tree into the index under <subdirectory>/"
msgstr "读取树对象到索引的 <子目录>/ 下"
-#: builtin/read-tree.c:126
+#: builtin/read-tree.c:127
msgid "update working tree with merge result"
msgstr "用合并的结果更新工作区"
-#: builtin/read-tree.c:128
+#: builtin/read-tree.c:129
msgid "gitignore"
msgstr "gitignore"
-#: builtin/read-tree.c:129
+#: builtin/read-tree.c:130
msgid "allow explicitly ignored files to be overwritten"
msgstr "允许忽略文件中设定的文件可以被覆盖"
-#: builtin/read-tree.c:132
+#: builtin/read-tree.c:133
msgid "don't check the working tree after merging"
msgstr "合并后不检查工作区"
-#: builtin/read-tree.c:133
+#: builtin/read-tree.c:134
msgid "don't update the index or the work tree"
msgstr "不更新索引区和工作区"
-#: builtin/read-tree.c:135
+#: builtin/read-tree.c:136
msgid "skip applying sparse checkout filter"
msgstr "跳过应用稀疏检出过滤器"
-#: builtin/read-tree.c:137
+#: builtin/read-tree.c:138
msgid "debug unpack-trees"
msgstr "调试 unpack-trees"
+#: builtin/reflog.c:500
+#, c-format
+msgid "%s' for '%s' is not a valid timestamp"
+msgstr "'%2$s' 的值 '%1$s' 不是一个有效的时间戳"
+
+#: builtin/reflog.c:616 builtin/reflog.c:621
+#, c-format
+msgid "'%s' is not a valid timestamp"
+msgstr "'%s' 不是一个有效的时间戳"
+
#: builtin/remote.c:11
msgid "git remote [-v | --verbose]"
msgstr "git remote [-v | --verbose]"
msgid "Failed to find tree of %s."
msgstr "无法找到 %s 指向的树。"
-#: builtin/reset.c:98
+#: builtin/reset.c:99
#, c-format
msgid "HEAD is now at %s"
msgstr "HEAD 现在位于 %s"
# 译者：汉字之间无空格，故删除%s前后空格
-#: builtin/reset.c:169
+#: builtin/reset.c:172
#, c-format
msgid "Cannot do a %s reset in the middle of a merge."
msgstr "在合并过程中不能做%s重置操作。"
-#: builtin/reset.c:248
+#: builtin/reset.c:251
msgid "be quiet, only report errors"
msgstr "安静模式，只报告错误"
-#: builtin/reset.c:250
+#: builtin/reset.c:253
msgid "reset HEAD and index"
msgstr "重置 HEAD 和索引"
-#: builtin/reset.c:251
+#: builtin/reset.c:254
msgid "reset only HEAD"
msgstr "只重置 HEAD"
-#: builtin/reset.c:253 builtin/reset.c:255
+#: builtin/reset.c:256 builtin/reset.c:258
msgid "reset HEAD, index and working tree"
msgstr "重置 HEAD、索引和工作区"
-#: builtin/reset.c:257
+#: builtin/reset.c:260
msgid "reset HEAD but keep local changes"
msgstr "重置 HEAD 但保存本地变更"
-#: builtin/reset.c:275
+#: builtin/reset.c:278
#, c-format
msgid "Failed to resolve '%s' as a valid revision."
msgstr "无法将 '%s' 解析为一个有效的版本。"
-#: builtin/reset.c:278 builtin/reset.c:286
+#: builtin/reset.c:281 builtin/reset.c:289
#, c-format
msgid "Could not parse object '%s'."
msgstr "不能解析对象 '%s'。"
-#: builtin/reset.c:283
+#: builtin/reset.c:286
#, c-format
msgid "Failed to resolve '%s' as a valid tree."
msgstr "无法将 '%s' 解析为一个有效的树对象。"
-#: builtin/reset.c:292
+#: builtin/reset.c:295
msgid "--patch is incompatible with --{hard,mixed,soft}"
msgstr "--patch 与 --{hard、mixed、soft} 选项不兼容"
-#: builtin/reset.c:301
+#: builtin/reset.c:304
msgid "--mixed with paths is deprecated; use 'git reset -- <paths>' instead."
msgstr "--mixed 带路径已弃用，而是用 'git reset -- <paths>'。"
# 译者：汉字之间无空格，故删除%s前后空格
-#: builtin/reset.c:303
+#: builtin/reset.c:306
#, c-format
msgid "Cannot do %s reset with paths."
msgstr "不能带路径进行%s重置。"
# 译者：汉字之间无空格，故删除%s前后空格
-#: builtin/reset.c:313
+#: builtin/reset.c:316
#, c-format
msgid "%s reset is not allowed in a bare repository"
msgstr "不能对裸版本库进行%s重置"
-#: builtin/reset.c:333
+#: builtin/reset.c:336
#, c-format
msgid "Could not reset index file to revision '%s'."
msgstr "不能重置索引文件至版本 '%s'。"
-#: builtin/reset.c:339
+#: builtin/reset.c:342
msgid "Unstaged changes after reset:"
msgstr "重置后撤出暂存区的变更："
-#: builtin/reset.c:344
+#: builtin/reset.c:347
msgid "Could not write new index file."
msgstr "不能写入新的索引文件。"
-#: builtin/rev-parse.c:339
+#: builtin/rev-parse.c:345
msgid "git rev-parse --parseopt [options] -- [<args>...]"
msgstr "git rev-parse --parseopt [选项] -- [<参数>...]"
-#: builtin/rev-parse.c:344
+#: builtin/rev-parse.c:350
msgid "keep the `--` passed as an arg"
msgstr "保持 `--` 作为一个参数传递"
-#: builtin/rev-parse.c:346
+#: builtin/rev-parse.c:352
msgid "stop parsing after the first non-option argument"
msgstr "遇到第一个非选项参数后停止解析"
-#: builtin/rev-parse.c:464
+#: builtin/rev-parse.c:470
msgid ""
"git rev-parse --parseopt [options] -- [<args>...]\n"
" or: git rev-parse --sq-quote [<arg>...]\n"
msgid "git cherry-pick <subcommand>"
msgstr "git cherry-pick <子命令>"
-#: builtin/revert.c:70 builtin/revert.c:92
+#: builtin/revert.c:71 builtin/revert.c:94
#, c-format
msgid "%s: %s cannot be used with %s"
msgstr "%s：%s 不能和 %s 同时使用"
-#: builtin/revert.c:103
+#: builtin/revert.c:105
msgid "end revert or cherry-pick sequence"
msgstr "终止反转或拣选操作"
-#: builtin/revert.c:104
+#: builtin/revert.c:106
msgid "resume revert or cherry-pick sequence"
msgstr "继续反转或拣选操作"
-#: builtin/revert.c:105
+#: builtin/revert.c:107
msgid "cancel revert or cherry-pick sequence"
msgstr "取消反转或拣选操作"
-#: builtin/revert.c:106
+#: builtin/revert.c:108
msgid "don't automatically commit"
msgstr "不要自动提交"
-#: builtin/revert.c:107
+#: builtin/revert.c:109
msgid "edit the commit message"
msgstr "编辑提交说明"
-#: builtin/revert.c:110
+#: builtin/revert.c:112
msgid "parent number"
msgstr "父编号"
-#: builtin/revert.c:112
+#: builtin/revert.c:114
msgid "merge strategy"
msgstr "合并策略"
-#: builtin/revert.c:113
+#: builtin/revert.c:115
msgid "option"
msgstr "选项"
-#: builtin/revert.c:114
+#: builtin/revert.c:116
msgid "option for merge strategy"
msgstr "合并策略的选项"
-#: builtin/revert.c:125
+#: builtin/revert.c:127
msgid "append commit name"
msgstr "追加提交名称"
-#: builtin/revert.c:126
+#: builtin/revert.c:128
msgid "allow fast-forward"
msgstr "允许快进式"
-#: builtin/revert.c:127
+#: builtin/revert.c:129
msgid "preserve initially empty commits"
msgstr "保留初始化的空提交"
-#: builtin/revert.c:128
+#: builtin/revert.c:130
msgid "allow commits with empty messages"
msgstr "允许提交说明为空"
-#: builtin/revert.c:129
+#: builtin/revert.c:131
msgid "keep redundant, empty commits"
msgstr "保持多余的、空的提交"
-#: builtin/revert.c:133
+#: builtin/revert.c:135
msgid "program error"
msgstr "程序错误"
-#: builtin/revert.c:223
+#: builtin/revert.c:225
msgid "revert failed"
msgstr "还原失败"
-#: builtin/revert.c:238
+#: builtin/revert.c:240
msgid "cherry-pick failed"
msgstr "拣选失败"
-#: builtin/rm.c:15
+#: builtin/rm.c:16
msgid "git rm [options] [--] <file>..."
msgstr "git rm [选项] [--] <文件>..."
-#: builtin/rm.c:64 builtin/rm.c:186
-#, c-format
+#: builtin/rm.c:64
msgid ""
-"submodule '%s' (or one of its nested submodules) uses a .git directory\n"
+"the following submodule (or one of its nested submodules)\n"
+"uses a .git directory:"
+msgid_plural ""
+"the following submodules (or one of its nested submodules)\n"
+"use a .git directory:"
+msgstr[0] "如下子模组（或一个其嵌套子模组）使用了一个 .git 目录："
+msgstr[1] "如下子模组（或一个其嵌套子模组）使用了一个 .git 目录："
+
+#: builtin/rm.c:70
+msgid ""
+"\n"
"(use 'rm -rf' if you really want to remove it including all of its history)"
msgstr ""
-"子模组 '%s'（或者它的一个嵌套子模组）使用一个 .git 目录\n"
+"\n"
"（使用 'rm -rf' 命令如果您真的想删除它及其全部历史）"
-#: builtin/rm.c:174
-#, c-format
+#: builtin/rm.c:230
+msgid ""
+"the following file has staged content different from both the\n"
+"file and the HEAD:"
+msgid_plural ""
+"the following files have staged content different from both the\n"
+"file and the HEAD:"
+msgstr[0] "如下文件其暂存的内容和工作区及 HEAD 中的都不一样："
+msgstr[1] "如下文件其暂存的内容和工作区及 HEAD 中的都不一样："
+
+#: builtin/rm.c:235
msgid ""
-"'%s' has staged content different from both the file and the HEAD\n"
+"\n"
"(use -f to force removal)"
msgstr ""
-"'%s' 暂存的内容和工作区及 HEAD 中的都不一样\n"
+"\n"
"（使用 -f 强制删除）"
-#: builtin/rm.c:180
-#, c-format
-msgid ""
-"'%s' has changes staged in the index\n"
-"(use --cached to keep the file, or -f to force removal)"
-msgstr ""
-"'%s' 有变更已暂存至索引中\n"
-"（使用 --cached 保存文件，或用 -f 强制删除）"
+#: builtin/rm.c:239
+msgid "the following file has changes staged in the index:"
+msgid_plural "the following files have changes staged in the index:"
+msgstr[0] "如下文件相对索引区的内容有修改"
+msgstr[1] "如下文件相对索引区的内容有修改"
-#: builtin/rm.c:191
-#, c-format
+#: builtin/rm.c:243 builtin/rm.c:254
msgid ""
-"'%s' has local modifications\n"
+"\n"
"(use --cached to keep the file, or -f to force removal)"
msgstr ""
-"'%s' 有本地修改\n"
-"（使用 --cached 保存文件，或用 -f 强制删除）"
+"\n"
+"（使用 --cached 保留本地文件，或用 -f 强制删除）"
-#: builtin/rm.c:207
+#: builtin/rm.c:251
+msgid "the following file has local modifications:"
+msgid_plural "the following files have local modifications:"
+msgstr[0] "如下文件有本地修改："
+msgstr[1] "如下文件有本地修改："
+
+#: builtin/rm.c:269
msgid "do not list removed files"
msgstr "不列出删除的文件"
-#: builtin/rm.c:208
+#: builtin/rm.c:270
msgid "only remove from the index"
msgstr "只从索引区删除"
-#: builtin/rm.c:209
+#: builtin/rm.c:271
msgid "override the up-to-date check"
msgstr "忽略文件更新状态检查"
-#: builtin/rm.c:210
+#: builtin/rm.c:272
msgid "allow recursive removal"
msgstr "允许递归删除"
-#: builtin/rm.c:212
+#: builtin/rm.c:274
msgid "exit with a zero status even if nothing matched"
msgstr "即使没有匹配，也以零状态退出"
-#: builtin/rm.c:283
+#: builtin/rm.c:345
#, c-format
msgid "not removing '%s' recursively without -r"
msgstr "未提供 -r 选项不会递归删除 '%s'"
-#: builtin/rm.c:322
+#: builtin/rm.c:384
#, c-format
msgid "git rm: unable to remove %s"
msgstr "git rm：不能删除 %s"
msgid "Missing author: %s"
msgstr "缺少作者：%s"
-#: builtin/shortlog.c:227
+#: builtin/shortlog.c:228
msgid "sort output according to the number of commits per author"
msgstr "根据每个作者的提交数量排序"
-#: builtin/shortlog.c:229
+#: builtin/shortlog.c:230
msgid "Suppress commit descriptions, only provides commit count"
msgstr "隐藏提交说明，只提供提交数量"
-#: builtin/shortlog.c:231
+#: builtin/shortlog.c:232
msgid "Show the email address of each author"
msgstr "显示每个作者的电子邮件地址"
-#: builtin/shortlog.c:232
+#: builtin/shortlog.c:233
msgid "w[,i1[,i2]]"
msgstr "w[,i1[,i2]]"
-#: builtin/shortlog.c:233
+#: builtin/shortlog.c:234
msgid "Linewrap output"
msgstr "折行输出"
msgid "show commits in topological order"
msgstr "以拓扑顺序显示提交"
-#: builtin/show-branch.c:671
+#: builtin/show-branch.c:672
msgid "show only commits not on the first branch"
msgstr "只显示不在第一个分支上的提交"
-#: builtin/show-branch.c:673
+#: builtin/show-branch.c:674
msgid "show merges reachable from only one tip"
msgstr "显示仅一个分支可访问的合并提交"
-#: builtin/show-branch.c:675
-msgid "show commits where no parent comes before its children"
-msgstr "æ\98¾ç¤ºæ\8f\90交æ\97¶ä»¥æ\97¶é\97´ä¸ºåº\8fä¸\94ç\88¶æ\8f\90交ä¸\8dè\83½é¢\86å\85\88å\90æ\8f\90交"
+#: builtin/show-branch.c:676
+msgid "topologically sort, maintaining date order where possible"
+msgstr "æ\8b\93æ\89\91æ\96¹å¼\8fæ\8e\92åº\8fï¼\8c并尽å\8f¯è\83½å\9c°ä¿\9dæ\8c\81æ\97¥æ\9c\9f顺åº\8f"
-#: builtin/show-branch.c:677
+#: builtin/show-branch.c:679
msgid "<n>[,<base>]"
msgstr "<n>[,<base>]"
-#: builtin/show-branch.c:678
+#: builtin/show-branch.c:680
msgid "show <n> most recent ref-log entries starting at base"
msgstr "显示从 base 开始的 <n> 条最近的引用日志记录"
msgid "git show-ref --exclude-existing[=pattern] < ref-list"
msgstr "git show-ref --exclude-existing[=模式] < 引用列表"
-#: builtin/show-ref.c:165
+#: builtin/show-ref.c:168
msgid "only show tags (can be combined with heads)"
msgstr "只显示 tags（可以和头共用）"
-#: builtin/show-ref.c:166
+#: builtin/show-ref.c:169
msgid "only show heads (can be combined with tags)"
msgstr "只显示头（可以和 tags 共用）"
-#: builtin/show-ref.c:167
+#: builtin/show-ref.c:170
msgid "stricter reference checking, requires exact ref path"
msgstr "更严格的引用检测，需要精确的引用路径"
-#: builtin/show-ref.c:170 builtin/show-ref.c:172
-msgid "show the HEAD reference"
-msgstr "显示 HEAD 引用"
+#: builtin/show-ref.c:173 builtin/show-ref.c:176
+msgid "show the HEAD reference, even if it would be filtered out"
+msgstr "显示 HEAD 引用，即使被过滤掉"
-#: builtin/show-ref.c:174
+#: builtin/show-ref.c:178
msgid "dereference tags into object IDs"
msgstr "转换 tags 到对象ID"
-#: builtin/show-ref.c:176
+#: builtin/show-ref.c:180
msgid "only show SHA1 hash using <n> digits"
msgstr "只显示使用 <n> 个数字的 SHA1 哈希"
-#: builtin/show-ref.c:180
+#: builtin/show-ref.c:184
msgid "do not print results to stdout (useful with --verify)"
msgstr "不打印结果到标准输出（例如与 --verify 参数共用）"
-#: builtin/show-ref.c:182
+#: builtin/show-ref.c:186
msgid "show refs from stdin that aren't in local repository"
msgstr "显示从标准输入中读入的不在本地版本库中的引用"
msgid "only useful for debugging"
msgstr "只对调试有用"
-#: git.c:16
+#: git.c:17
msgid ""
"'git help -a' and 'git help -g' lists available subcommands and some\n"
"concept guides. See 'git help <command>' or 'git help <concept>'\n"
"命令 'git help -a' 和 'git help -g' 显示可用的子命令和一些指南。参见\n"
"'git help <命令>' 或 'git help <指南>' 来查看给定的子命令帮助或指南。"
-#: parse-options.h:156
+#: parse-options.h:144
+msgid "expiry date"
+msgstr "逾期日期"
+
+#: parse-options.h:159
msgid "no-op (backward compatibility)"
msgstr "空操作（向后兼容）"
-#: parse-options.h:232
+#: parse-options.h:236
msgid "be more verbose"
msgstr "更加详细"
-#: parse-options.h:234
+#: parse-options.h:238
msgid "be more quiet"
msgstr "更加安静"
-#: parse-options.h:240
+#: parse-options.h:244
msgid "use <n> digits to display SHA-1s"
msgstr "用 <n> 位数字显示 SHA-1 哈希值"
msgstr "移动或重命名一个文件、目录或符号链接"
#: common-cmds.h:21
-msgid "Fetch from and merge with another repository or a local branch"
-msgstr "获取并合并另外的版本库或一个本地分支"
+msgid "Fetch from and integrate with another repository or a local branch"
+msgstr "获取并整合另外的版本库或一个本地分支"
#: common-cmds.h:22
msgid "Update remote refs along with associated objects"
#: git-am.sh:105
#, sh-format
msgid ""
-"When you have resolved this problem, run \"$cmdline --resolved\".\n"
+"When you have resolved this problem, run \"$cmdline --continue\".\n"
"If you prefer to skip this patch, run \"$cmdline --skip\" instead.\n"
"To restore the original branch and stop patching, run \"$cmdline --abort\"."
msgstr ""
-"当您解决了此问题后，执行 \"$cmdline --resolved\"。\n"
+"当您解决了此问题后，执行 \"$cmdline --continue\"。\n"
"如果您想跳过此补丁，则执行 \"$cmdline --skip\"。\n"
"要恢复原分支并停止打补丁，执行 \"$cmdline --abort\"。"
"参数 -b/--binary 已经很长时间不做任何实质操作了，并且将被删除。\n"
"请不要再使用它了。"
-#: git-am.sh:477
+#: git-am.sh:479
#, sh-format
msgid "previous rebase directory $dotest still exists but mbox given."
-msgstr "之前的变基目录 $dotest 仍然存在但给出了mbox。"
+msgstr "之前的变基目录 $dotest 仍然存在，但却提供了 mbox。"
-#: git-am.sh:482
+#: git-am.sh:484
msgid "Please make up your mind. --skip or --abort?"
msgstr "请下决心。--skip 或是 --abort ？"
-#: git-am.sh:509
+#: git-am.sh:520
+#, sh-format
+msgid ""
+"Stray $dotest directory found.\n"
+"Use \"git am --abort\" to remove it."
+msgstr ""
+"发现了错误的 $dotest 目录。\n"
+"使用 \"git am --abort\" 删除它。"
+
+#: git-am.sh:528
msgid "Resolve operation not in progress, we are not resuming."
msgstr "解决操作未进行，我们不会继续。"
-#: git-am.sh:575
+#: git-am.sh:594
#, sh-format
msgid "Dirty index: cannot apply patches (dirty: $files)"
msgstr "脏的索引：不能应用补丁（脏文件：$files）"
-#: git-am.sh:679
+#: git-am.sh:698
#, sh-format
msgid ""
"Patch is empty. Was it split wrong?\n"
"如果您想要跳过这个补丁，执行 \"$cmdline --skip\"。\n"
"要恢复原分支并停止打补丁，执行 \"$cmdline --abort\"。"
-#: git-am.sh:706
+#: git-am.sh:725
msgid "Patch does not have a valid e-mail address."
msgstr "补丁中没有一个有效的邮件地址。"
-#: git-am.sh:753
+#: git-am.sh:772
msgid "cannot be interactive without stdin connected to a terminal."
msgstr "标准输入没有和终端关联，不能进行交互式操作。"
-#: git-am.sh:757
+#: git-am.sh:776
msgid "Commit Body is:"
msgstr "提交内容为："
#. TRANSLATORS: Make sure to include [y], [n], [e], [v] and [a]
#. in your translation. The program will only accept English
#. input at this point.
-#: git-am.sh:764
+#: git-am.sh:783
msgid "Apply? [y]es/[n]o/[e]dit/[v]iew patch/[a]ccept all "
msgstr "应用？[y]es/[n]o/[e]dit/[v]iew patch/[a]ccept all "
-#: git-am.sh:800
+#: git-am.sh:819
#, sh-format
msgid "Applying: $FIRSTLINE"
msgstr "正应用：$FIRSTLINE"
-#: git-am.sh:821
+#: git-am.sh:840
msgid ""
"No changes - did you forget to use 'git add'?\n"
"If there is nothing left to stage, chances are that something else\n"
"如果没有什么要添加到暂存区的，则很可能是其它提交已经引入了相同的变更。\n"
"您也许想要跳过这个补丁。"
-#: git-am.sh:829
+#: git-am.sh:848
msgid ""
"You still have unmerged paths in your index\n"
"did you forget to use 'git add'?"
msgstr "您的索引中仍有未合并的路径。您是否忘了执行 'git add'？"
-#: git-am.sh:845
+#: git-am.sh:864
msgid "No changes -- Patch already applied."
msgstr "没有变更 —— 补丁已经应用过。"
-#: git-am.sh:855
+#: git-am.sh:874
#, sh-format
msgid "Patch failed at $msgnum $FIRSTLINE"
msgstr "补丁失败于 $msgnum $FIRSTLINE"
-#: git-am.sh:858
+#: git-am.sh:877
#, sh-format
msgid ""
"The copy of the patch that failed is found in:\n"
"失败的补丁文件副本位于：\n"
" $dotest/patch"
-#: git-am.sh:876
+#: git-am.sh:895
msgid "applying to an empty history"
msgstr "正应用到一个空历史上"
msgid "Cannot rebase onto multiple branches"
msgstr "无法变基到多个分支"
-#: git-rebase.sh:53
+#: git-rebase.sh:54
msgid ""
"When you have resolved this problem, run \"git rebase --continue\".\n"
"If you prefer to skip this patch, run \"git rebase --skip\" instead.\n"
"如果您想跳过此补丁，则执行 \"git rebase --skip\"。\n"
"要恢复原分支并停止变基，执行 \"git rebase --abort\"。"
+#: git-rebase.sh:156
+msgid "Applied autostash."
+msgstr "成功应用 autostash。"
+
+#: git-rebase.sh:159
+#, sh-format
+msgid "Cannot store $stash_sha1"
+msgstr "无法保存 $stash_sha1"
+
#: git-rebase.sh:160
+msgid ""
+"Applying autostash resulted in conflicts.\n"
+"Your changes are safe in the stash.\n"
+"You can run \"git stash pop\" or \"git stash drop\" it at any time.\n"
+msgstr ""
+"应用 autostash 导致冲突。\n"
+"您的修改安全地保存在 stash 中。\n"
+"您可以在任何时候运行 \"git stash pop\" 或 \"git stash drop\"。\n"
+
+#: git-rebase.sh:190
msgid "The pre-rebase hook refused to rebase."
msgstr "钩子 pre-rebase 拒绝变基。"
-#: git-rebase.sh:165
+#: git-rebase.sh:195
msgid "It looks like git-am is in progress. Cannot rebase."
msgstr "似乎正处于在 git-am 的执行过程中。无法变基。"
-#: git-rebase.sh:296
+#: git-rebase.sh:329
msgid "The --exec option must be used with the --interactive option"
msgstr "选项 --exec 必须和选项 --interactive 同时使用"
-#: git-rebase.sh:301
+#: git-rebase.sh:334
msgid "No rebase in progress?"
msgstr "没有正在进行的变基？"
-#: git-rebase.sh:312
+#: git-rebase.sh:345
msgid "The --edit-todo action can only be used during interactive rebase."
msgstr "动作 --edit-todo 只能用在交互式变基过程中。"
-#: git-rebase.sh:319
+#: git-rebase.sh:352
msgid "Cannot read HEAD"
msgstr "不能读取 HEAD"
-#: git-rebase.sh:322
+#: git-rebase.sh:355
msgid ""
"You must edit all merge conflicts and then\n"
"mark them as resolved using git add"
"您必须编辑所有的合并冲突，然后通过 git add\n"
"命令将它们标记为已解决"
-#: git-rebase.sh:340
+#: git-rebase.sh:373
#, sh-format
msgid "Could not move back to $head_name"
msgstr "无法移回 $head_name"
-#: git-rebase.sh:359
+#: git-rebase.sh:392
#, sh-format
msgid ""
"It seems that there is already a $state_dir_base directory, and\n"
"\t$cmd_clear_stale_rebase\n"
"然后再重新执行变基。为避免您丢失重要数据，我已经停止当前操作。"
-#: git-rebase.sh:404
+#: git-rebase.sh:437
#, sh-format
msgid "invalid upstream $upstream_name"
msgstr "无效的上游 $upstream_name"
-#: git-rebase.sh:428
+#: git-rebase.sh:461
#, sh-format
msgid "$onto_name: there are more than one merge bases"
msgstr "$onto_name: 有一个以上的合并基准"
-#: git-rebase.sh:431 git-rebase.sh:435
+#: git-rebase.sh:464 git-rebase.sh:468
#, sh-format
msgid "$onto_name: there is no merge base"
msgstr "$onto_name: 没有合并基准"
-#: git-rebase.sh:440
+#: git-rebase.sh:473
#, sh-format
msgid "Does not point to a valid commit: $onto_name"
msgstr "没有指向一个有效的提交：$onto_name"
-#: git-rebase.sh:463
+#: git-rebase.sh:496
#, sh-format
msgid "fatal: no such branch: $branch_name"
msgstr "严重错误：无此分支：$branch_name"
-#: git-rebase.sh:483
+#: git-rebase.sh:519
+msgid "Cannot autostash"
+msgstr "无法 autostash"
+
+#: git-rebase.sh:524
+#, sh-format
+msgid "Created autostash: $stash_abbrev"
+msgstr "创建了 autostash: $stash_abbrev"
+
+#: git-rebase.sh:528
msgid "Please commit or stash them."
msgstr "请提交或为它们保存进度。"
-#: git-rebase.sh:501
+#: git-rebase.sh:548
#, sh-format
msgid "Current branch $branch_name is up to date."
msgstr "当前分支 $branch_name 是最新的。"
-#: git-rebase.sh:504
+#: git-rebase.sh:552
#, sh-format
msgid "Current branch $branch_name is up to date, rebase forced."
msgstr "当前分支 $branch_name 是最新的，强制变基。"
-#: git-rebase.sh:515
+#: git-rebase.sh:563
#, sh-format
msgid "Changes from $mb to $onto:"
msgstr "变更从 $mb 到 $onto："
#. Detach HEAD and reset the tree
-#: git-rebase.sh:524
+#: git-rebase.sh:572
msgid "First, rewinding head to replay your work on top of it..."
msgstr "首先，重置头指针以便在上面重放您的工作..."
-#: git-rebase.sh:532
+#: git-rebase.sh:582
#, sh-format
msgid "Fast-forwarded $branch_name to $onto_name."
msgstr "快进 $branch_name 至 $onto_name。"
msgid "Cannot record working tree state"
msgstr "不能记录工作区状态"
+#: git-stash.sh:190
+#, sh-format
+msgid "Cannot update $ref_stash with $w_commit"
+msgstr "无法用 $w_commit 更新 $ref_stash"
+
#. TRANSLATORS: $option is an invalid option, like
#. `--blah-blah'. The 7 spaces at the beginning of the
#. second line correspond to "error: ". So you should line
#. $ git stash save --blah-blah 2>&1 | head -n 2
#. error: unknown option for 'stash save': --blah-blah
#. To provide a message, use git stash save -- '--blah-blah'
-#: git-stash.sh:202
+#: git-stash.sh:241
#, sh-format
msgid ""
"error: unknown option for 'stash save': $option\n"
"错误：'stash save' 的未知选项：$option\n"
" 要提供一个描述信息，使用 git stash save -- '$option'"
-#: git-stash.sh:223
+#: git-stash.sh:262
msgid "No local changes to save"
msgstr "没有要保存的本地修改"
-#: git-stash.sh:227
+#: git-stash.sh:268
+msgid ""
+"The following untracked files would NOT be saved but need to be removed by "
+"stash save:"
+msgstr "如下未跟踪文件将不会被保存但是将会因为进度保存而需要被删除："
+
+#: git-stash.sh:270
+msgid ""
+"Aborting. Consider using either the --force or --include-untracked option."
+msgstr "终止。考虑使用 --force 或者 --include-untracked 选项。"
+
+#: git-stash.sh:274
msgid "Cannot initialize stash"
msgstr "无法初始化 stash"
-#: git-stash.sh:235
+#: git-stash.sh:278
msgid "Cannot save the current status"
msgstr "无法保存当前状态"
-#: git-stash.sh:253
+#: git-stash.sh:296
msgid "Cannot remove worktree changes"
msgstr "无法删除工作区变更"
-#: git-stash.sh:352
+#: git-stash.sh:395
msgid "No stash found."
msgstr "未发现 stash。"
-#: git-stash.sh:359
+#: git-stash.sh:402
#, sh-format
msgid "Too many revisions specified: $REV"
msgstr "指定了太多的版本：$REV"
-#: git-stash.sh:365
+#: git-stash.sh:408
#, sh-format
msgid "$reference is not valid reference"
msgstr "$reference 不是有效的引用"
-#: git-stash.sh:393
+#: git-stash.sh:436
#, sh-format
msgid "'$args' is not a stash-like commit"
msgstr "'$args' 不是 stash 样提交"
-#: git-stash.sh:404
+#: git-stash.sh:447
#, sh-format
msgid "'$args' is not a stash reference"
msgstr "'$args' 不是一个 stash 引用"
-#: git-stash.sh:412
+#: git-stash.sh:455
msgid "unable to refresh index"
msgstr "无法刷新索引"
-#: git-stash.sh:416
+#: git-stash.sh:459
msgid "Cannot apply a stash in the middle of a merge"
msgstr "无法在合并过程中恢复进度"
-#: git-stash.sh:424
+#: git-stash.sh:467
msgid "Conflicts in index. Try without --index."
msgstr "索引中有冲突。尝试不使用 --index。"
-#: git-stash.sh:426
+#: git-stash.sh:469
msgid "Could not save index tree"
msgstr "不能保存索引树"
-#: git-stash.sh:460
+#: git-stash.sh:503
msgid "Cannot unstage modified files"
msgstr "无法还原修改的文件"
-#: git-stash.sh:475
+#: git-stash.sh:518
msgid "Index was not unstashed."
msgstr "索引的进度没有被恢复。"
-#: git-stash.sh:492
+#: git-stash.sh:535
#, sh-format
msgid "Dropped ${REV} ($s)"
msgstr "丢弃了 ${REV} ($s)"
-#: git-stash.sh:493
+#: git-stash.sh:536
#, sh-format
msgid "${REV}: Could not drop stash entry"
msgstr "${REV}：不能丢弃进度条目"
-#: git-stash.sh:500
+#: git-stash.sh:543
msgid "No branch name specified"
msgstr "未指定分支名"
-#: git-stash.sh:571
+#: git-stash.sh:615
msgid "(To restore them type \"git stash apply\")"
msgstr "（为恢复数据输入 \"git stash apply\"）"
-#: git-submodule.sh:91
+#: git-submodule.sh:95
#, sh-format
msgid "cannot strip one component off url '$remoteurl'"
msgstr "无法从 url '$remoteurl' 剥离一个组件"
-#: git-submodule.sh:196
+#: git-submodule.sh:237
#, sh-format
msgid "No submodule mapping found in .gitmodules for path '$sm_path'"
msgstr "未在 .gitmodules 中发现路径 '$sm_path' 的子模组映射"
-#: git-submodule.sh:239
+#: git-submodule.sh:281
#, sh-format
msgid "Clone of '$url' into submodule path '$sm_path' failed"
msgstr "无法克隆 '$url' 到子模组路径 '$sm_path'"
-#: git-submodule.sh:251
+#: git-submodule.sh:293
#, sh-format
msgid "Gitdir '$a' is part of the submodule path '$b' or vice versa"
msgstr "Gitdir '$a' 在子模组路径 '$b' 之下或相反"
-#: git-submodule.sh:349
+#: git-submodule.sh:403
+msgid "Relative path can only be used from the toplevel of the working tree"
+msgstr "只能在工作区的顶级目录中使用相对路径"
+
+#: git-submodule.sh:413
#, sh-format
msgid "repo URL: '$repo' must be absolute or begin with ./|../"
msgstr "版本库URL：'$repo' 必须是绝对路径或以 ./|../ 起始"
-#: git-submodule.sh:366
+#: git-submodule.sh:430
#, sh-format
msgid "'$sm_path' already exists in the index"
msgstr "'$sm_path' 已经存在于索引中"
-#: git-submodule.sh:370
+#: git-submodule.sh:434
#, sh-format
msgid ""
"The following path is ignored by one of your .gitignore files:\n"
"$sm_path\n"
"如果您确实想添加它，使用 -f 参数。"
-#: git-submodule.sh:388
+#: git-submodule.sh:452
#, sh-format
msgid "Adding existing repo at '$sm_path' to the index"
msgstr "添加位于 '$sm_path' 的现存版本库到索引"
-#: git-submodule.sh:390
+#: git-submodule.sh:454
#, sh-format
msgid "'$sm_path' already exists and is not a valid git repo"
msgstr "'$sm_path' 已存在且不是一个有效的 git 版本库"
-#: git-submodule.sh:398
+#: git-submodule.sh:462
#, sh-format
msgid "A git directory for '$sm_name' is found locally with remote(s):"
msgstr "本地发现 '$sm_name' 的一个 git 目录，与其对应的远程版本库："
-#: git-submodule.sh:400
+#: git-submodule.sh:464
#, sh-format
msgid ""
"If you want to reuse this local git directory instead of cloning again from"
msgstr "如果您想重用此本地 git 目录而不是重新克隆自"
-#: git-submodule.sh:402
+#: git-submodule.sh:466
#, sh-format
msgid ""
"use the '--force' option. If the local git directory is not the correct repo"
msgstr "使用 '--force' 参数。如果本地 git 目录不是正确的版本库"
-#: git-submodule.sh:403
+#: git-submodule.sh:467
#, sh-format
msgid ""
"or you are unsure what this means choose another name with the '--name' "
"option."
msgstr "或者您不确定其中含义使用 '--name' 参数选择另外一个名称。"
-#: git-submodule.sh:405
+#: git-submodule.sh:469
#, sh-format
msgid "Reactivating local git directory for submodule '$sm_name'."
msgstr "激活本地 git 目录到子模组 '$sm_name'。"
-#: git-submodule.sh:417
+#: git-submodule.sh:481
#, sh-format
msgid "Unable to checkout submodule '$sm_path'"
msgstr "不能检出子模组 '$sm_path'"
-#: git-submodule.sh:422
+#: git-submodule.sh:486
#, sh-format
msgid "Failed to add submodule '$sm_path'"
msgstr "无法添加子模组 '$sm_path'"
-#: git-submodule.sh:431
+#: git-submodule.sh:495
#, sh-format
msgid "Failed to register submodule '$sm_path'"
msgstr "无法注册子模组 '$sm_path'"
-#: git-submodule.sh:474
+#: git-submodule.sh:539
#, sh-format
-msgid "Entering '$prefix$sm_path'"
-msgstr "正在进入 '$prefix$sm_path'"
+msgid "Entering '$prefix$displaypath'"
+msgstr "正在进入 '$prefix$displaypath'"
-#: git-submodule.sh:488
+#: git-submodule.sh:554
#, sh-format
-msgid "Stopping at '$sm_path'; script returned non-zero status."
-msgstr "停止于 '$sm_path'，脚本返回非零值。"
+msgid "Stopping at '$prefix$displaypath'; script returned non-zero status."
+msgstr "停止于 '$prefix$displaypath'，脚本返回非零值。"
-#: git-submodule.sh:532
+#: git-submodule.sh:600
#, sh-format
-msgid "No url found for submodule path '$sm_path' in .gitmodules"
-msgstr "在 .gitmodules 中未找到子模组路径 '$sm_path' 的 url"
+msgid "No url found for submodule path '$displaypath' in .gitmodules"
+msgstr "在 .gitmodules 中未找到子模组路径 '$displaypath' 的 url"
-#: git-submodule.sh:541
+#: git-submodule.sh:609
#, sh-format
-msgid "Failed to register url for submodule path '$sm_path'"
-msgstr "无法为子模组路径 '$sm_path' 注册 url"
+msgid "Failed to register url for submodule path '$displaypath'"
+msgstr "无法为子模组路径 '$displaypath' 注册 url"
-#: git-submodule.sh:543
+#: git-submodule.sh:611
#, sh-format
-msgid "Submodule '$name' ($url) registered for path '$sm_path'"
-msgstr "子模组 '$name' ($url) 已为路径 '$sm_path' 注册"
+msgid "Submodule '$name' ($url) registered for path '$displaypath'"
+msgstr "子模组 '$name' ($url) 未对路径 '$displaypath' 注册"
-#: git-submodule.sh:551
+#: git-submodule.sh:619
#, sh-format
-msgid "Failed to register update mode for submodule path '$sm_path'"
-msgstr "无法为子模组路径 '$sm_path' 注册更新模式"
+msgid "Failed to register update mode for submodule path '$displaypath'"
+msgstr "无法为子模组路径 '$displaypath' 注册更新模式"
-#: git-submodule.sh:588
+#: git-submodule.sh:656
#, sh-format
msgid "Use '.' if you really want to deinitialize all submodules"
msgstr "使用 '.' 如果您真的想要对所有子模组取消初始化"
-#: git-submodule.sh:603
+#: git-submodule.sh:673
#, sh-format
-msgid "Submodule work tree '$sm_path' contains a .git directory"
-msgstr "子模组工作区 '$sm_path' 包含一个 .git 目录"
+msgid "Submodule work tree '$displaypath' contains a .git directory"
+msgstr "子模组工作区 '$displaypath' 包含一个 .git 目录"
-#: git-submodule.sh:604
+#: git-submodule.sh:674
#, sh-format
msgid ""
"(use 'rm -rf' if you really want to remove it including all of its history)"
msgstr "（使用 'rm -rf' 命令如果您真的想删除它及其全部历史）"
-#: git-submodule.sh:610
+#: git-submodule.sh:680
#, sh-format
msgid ""
-"Submodule work tree '$sm_path' contains local modifications; use '-f' to "
+"Submodule work tree '$displaypath' contains local modifications; use '-f' to "
"discard them"
-msgstr "子模组工作区 '$sm_path' 包含本地修改；使用 '-f' 丢弃它们"
+msgstr "子模组工作区 '$displaypath' 包含本地修改；使用 '-f' 丢弃它们"
-#: git-submodule.sh:613
+#: git-submodule.sh:683
#, sh-format
-msgid "Cleared directory '$sm_path'"
-msgstr "已清除目录 '$sm_path'"
+msgid "Cleared directory '$displaypath'"
+msgstr "已清除目录 '$displaypath'"
-#: git-submodule.sh:614
+#: git-submodule.sh:684
#, sh-format
-msgid "Could not remove submodule work tree '$sm_path'"
-msgstr "无法移除子模组工作区 '$sm_path'"
+msgid "Could not remove submodule work tree '$displaypath'"
+msgstr "无法移除子模组工作区 '$displaypath'"
-#: git-submodule.sh:617
+#: git-submodule.sh:687
#, sh-format
-msgid "Could not create empty submodule directory '$sm_path'"
-msgstr "不能创建空的子模组目录 '$sm_path'"
+msgid "Could not create empty submodule directory '$displaypath'"
+msgstr "不能创建空的子模组目录 '$displaypath'"
-#: git-submodule.sh:626
+#: git-submodule.sh:696
#, sh-format
-msgid "Submodule '$name' ($url) unregistered for path '$sm_path'"
-msgstr "子模组 '$name' ($url) 未对路径 '$sm_path' 注册"
+msgid "Submodule '$name' ($url) unregistered for path '$displaypath'"
+msgstr "子模组 '$name' ($url) 未对路径 '$displaypath' 注册"
-#: git-submodule.sh:731
+#: git-submodule.sh:811
#, sh-format
msgid ""
-"Submodule path '$prefix$sm_path' not initialized\n"
+"Submodule path '$displaypath' not initialized\n"
"Maybe you want to use 'update --init'?"
msgstr ""
-"子模组路径 '$prefix$sm_path' 没有初始化\n"
+"子模组路径 '$displaypath' 没有初始化\n"
"也许您想用 'update --init'？"
-#: git-submodule.sh:744
+#: git-submodule.sh:824
#, sh-format
-msgid "Unable to find current revision in submodule path '$prefix$sm_path'"
-msgstr "无法在子模组路径 '$prefix$sm_path' 中找到当前版本"
+msgid "Unable to find current revision in submodule path '$displaypath'"
+msgstr "无法在子模组路径 '$displaypath' 中找到当前版本"
-#: git-submodule.sh:753
+#: git-submodule.sh:833
#, sh-format
msgid "Unable to fetch in submodule path '$sm_path'"
msgstr "无法在子模组路径 '$sm_path' 中获取"
-#: git-submodule.sh:777
+#: git-submodule.sh:857
+#, sh-format
+msgid "Unable to fetch in submodule path '$displaypath'"
+msgstr "无法在子模组路径 '$displaypath' 中获取"
+
+#: git-submodule.sh:871
#, sh-format
-msgid "Unable to fetch in submodule path '$prefix$sm_path'"
-msgstr "无法在子模组路径 '$prefix$sm_path' 中获取"
+msgid "Unable to rebase '$sha1' in submodule path '$displaypath'"
+msgstr "无法在子模组路径 '$displaypath' 中变基 '$sha1'"
-#: git-submodule.sh:791
+#: git-submodule.sh:872
#, sh-format
-msgid "Unable to rebase '$sha1' in submodule path '$prefix$sm_path'"
-msgstr "无法在子模组路径 '$prefix$sm_path' 中变基 '$sha1'"
+msgid "Submodule path '$displaypath': rebased into '$sha1'"
+msgstr "子模组路径 '$displaypath'：变基至 '$sha1'"
-#: git-submodule.sh:792
+#: git-submodule.sh:877
#, sh-format
-msgid "Submodule path '$prefix$sm_path': rebased into '$sha1'"
-msgstr "子模组路径 '$prefix$sm_path'：变基至 '$sha1'"
+msgid "Unable to merge '$sha1' in submodule path '$displaypath'"
+msgstr "无法合并 '$sha1' 到子模组路径 '$displaypath' 中"
-#: git-submodule.sh:797
+#: git-submodule.sh:878
#, sh-format
-msgid "Unable to merge '$sha1' in submodule path '$prefix$sm_path'"
-msgstr "无法合并 '$sha1' 到子模组路径 '$prefix$sm_path' 中"
+msgid "Submodule path '$displaypath': merged in '$sha1'"
+msgstr "子模组路径 '$displaypath'：已合并入 '$sha1'"
-#: git-submodule.sh:798
+#: git-submodule.sh:883
#, sh-format
-msgid "Submodule path '$prefix$sm_path': merged in '$sha1'"
-msgstr "子模组路径 '$prefix$sm_path'：已合并入 '$sha1'"
+msgid ""
+"Execution of '$command $sha1' failed in submodule path '$prefix$sm_path'"
+msgstr "在子模组路径 '$prefix$sm_path' 中执行 '$command $sha1' 失败"
-#: git-submodule.sh:803
+#: git-submodule.sh:884
#, sh-format
-msgid "Unable to checkout '$sha1' in submodule path '$prefix$sm_path'"
-msgstr "无法在子模组路径 '$prefix$sm_path' 中检出 '$sha1'"
+msgid "Submodule path '$prefix$sm_path': '$command $sha1'"
+msgstr "子模组路径 '$prefix$sm_path': '$command $sha1'"
-#: git-submodule.sh:804
+#: git-submodule.sh:889
#, sh-format
-msgid "Submodule path '$prefix$sm_path': checked out '$sha1'"
-msgstr "子模组路径 '$prefix$sm_path'：检出 '$sha1'"
+msgid "Unable to checkout '$sha1' in submodule path '$displaypath'"
+msgstr "无法在子模组路径 '$displaypath' 中检出 '$sha1'"
-#: git-submodule.sh:831
+#: git-submodule.sh:890
#, sh-format
-msgid "Failed to recurse into submodule path '$prefix$sm_path'"
-msgstr "无法递归进子模组路径 '$prefix$sm_path'"
+msgid "Submodule path '$displaypath': checked out '$sha1'"
+msgstr "子模组路径 '$displaypath'：检出 '$sha1'"
-#: git-submodule.sh:939
+#: git-submodule.sh:917
+#, sh-format
+msgid "Failed to recurse into submodule path '$displaypath'"
+msgstr "无法递归进子模组路径 '$displaypath'"
+
+#: git-submodule.sh:1025
msgid "The --cached option cannot be used with the --files option"
msgstr "选项 --cached 不能和选项 --files 同时使用"
#. unexpected type
-#: git-submodule.sh:979
+#: git-submodule.sh:1066
#, sh-format
msgid "unexpected mode $mod_dst"
msgstr "意外的模式 $mod_dst"
# 译者：注意保持前导空格
-#: git-submodule.sh:997
+#: git-submodule.sh:1086
#, sh-format
-msgid " Warn: $name doesn't contain commit $sha1_src"
-msgstr " 警告：$name 未包含提交 $sha1_src"
+msgid " Warn: $display_name doesn't contain commit $sha1_src"
+msgstr " 警告：$display_name 未包含提交 $sha1_src"
# 译者：注意保持前导空格
-#: git-submodule.sh:1000
+#: git-submodule.sh:1089
#, sh-format
-msgid " Warn: $name doesn't contain commit $sha1_dst"
-msgstr " 警告：$name 未包含提交 $sha1_dst"
+msgid " Warn: $display_name doesn't contain commit $sha1_dst"
+msgstr " 警告：$display_name 未包含提交 $sha1_dst"
# 译者：注意保持前导空格
-#: git-submodule.sh:1003
+#: git-submodule.sh:1092
#, sh-format
-msgid " Warn: $name doesn't contain commits $sha1_src and $sha1_dst"
-msgstr " 警告：$name 未包含提交 $sha1_src 和 $sha1_dst"
+msgid " Warn: $display_name doesn't contain commits $sha1_src and $sha1_dst"
+msgstr " 警告：$display_name 未包含提交 $sha1_src 和 $sha1_dst"
-#: git-submodule.sh:1028
+#: git-submodule.sh:1117
msgid "blob"
msgstr "数据对象"
-#: git-submodule.sh:1066
+#: git-submodule.sh:1155
msgid "Submodules changed but not updated:"
msgstr "子模组已修改但尚未更新："
-#: git-submodule.sh:1068
+#: git-submodule.sh:1157
msgid "Submodule changes to be committed:"
msgstr "要提交的子模组变更："
-#: git-submodule.sh:1153
+#: git-submodule.sh:1242
#, sh-format
msgid "Failed to recurse into submodule path '$sm_path'"
msgstr "无法递归进子模组路径 '$sm_path'"
-#: git-submodule.sh:1216
+#: git-submodule.sh:1306
#, sh-format
-msgid "Synchronizing submodule url for '$prefix$sm_path'"
-msgstr "为 '$prefix$sm_path' 同步子模组 url"
+msgid "Synchronizing submodule url for '$displaypath'"
+msgstr "为 '$displaypath' 同步子模组 url"
+
+#~ msgid ""
+#~ "the following submodule (or one of its nested submodule)\n"
+#~ "uses a .git directory:"
+#~ msgid_plural ""
+#~ "the following submodules (or one of its nested submodule)\n"
+#~ "use a .git directory:"
+#~ msgstr[0] "如下子模组（或一个其嵌套的子模组）使用了一个 .git 目录："
+#~ msgstr[1] "如下子模组（或一个其嵌套的子模组）使用了一个 .git 目录："
+
+#~ msgid "Cannot change unmerged .gitmodules, resolve merge conflicts first"
+#~ msgstr "无法修改未合并的 .gitmodules，先解决合并冲突"
+
+#~ msgid "Could not find section in .gitmodules where path=%s"
+#~ msgstr "无法在 .gitmodules 中找到 path=%s 的小节"
+
+#~ msgid "Could not update .gitmodules entry %s"
+#~ msgstr "不能更新 .gitmodules 条目 %s"
+
+#~ msgid "Could not remove .gitmodules entry for %s"
+#~ msgstr "无法移除 %s 的 .gitmodules 条目"
+
+#~ msgid "could not find .gitmodules in index"
+#~ msgstr "无法在索引中找到 .gitmodules"
+
+#~ msgid "reading updated .gitmodules failed"
+#~ msgstr "读取更新后的 .gitmodules 失败"
+
+#~ msgid "unable to stat updated .gitmodules"
+#~ msgstr "不能枚举更新后的 .gitmodules"
+
+#~ msgid "unable to remove .gitmodules from index"
+#~ msgstr "不能从索引中移除 .gitmodules"
+
+#~ msgid "adding updated .gitmodules failed"
+#~ msgstr "添加更新后的 .gitmodules 失败"
+
+#~ msgid "staging updated .gitmodules failed"
+#~ msgstr "将更新后 .gitmodules 添加暂存区失败"
+
+#~ msgid "Could not set core.worktree in %s"
+#~ msgstr "不能在 %s 中设置 core.worktree"
+
+# 译者：注意保持前导空格
+#~ msgid " (fix conflicts and then run \"git am --resolved\")"
+#~ msgstr " （解决冲突，然后运行 \"git am --resolved\"）"
+
+# 译者：注意保持前导空格
+#~ msgid " (all conflicts fixed: run \"git commit\")"
+#~ msgstr " （解决所有冲突后，执行 \"git commit\"）"
+
+#~ msgid "more than %d trees given: '%s'"
+#~ msgstr "提供了超过 %d 个树对象：'%s'"
+
+#~ msgid "You cannot combine --no-ff with --ff-only."
+#~ msgstr "您不能将 --no-ff 与 --ff-only 同时使用。"
+
+#~ msgid "Huh? Directory %s is in index and no submodule?"
+#~ msgstr "嗯？目录 %s 在索引中并且不是子模组？"
+
+#~ msgid ""
+#~ "submodule '%s' (or one of its nested submodules) uses a .git directory\n"
+#~ "(use 'rm -rf' if you really want to remove it including all of its "
+#~ "history)"
+#~ msgstr ""
+#~ "子模组 '%s'（或者它的一个嵌套子模组）使用一个 .git 目录\n"
+#~ "（使用 'rm -rf' 命令如果您真的想删除它及其全部历史）"
+
+#~ msgid ""
+#~ "'%s' has changes staged in the index\n"
+#~ "(use --cached to keep the file, or -f to force removal)"
+#~ msgstr ""
+#~ "'%s' 有变更已暂存至索引中\n"
+#~ "（使用 --cached 保存文件，或用 -f 强制删除）"
+
+#~ msgid "show commits where no parent comes before its children"
+#~ msgstr "显示提交时以时间为序且父提交不能领先子提交"
+
+#~ msgid "show the HEAD reference"
+#~ msgstr "显示 HEAD 引用"
+
+#~ msgid "Submodule '$name' ($url) registered for path '$sm_path'"
+#~ msgstr "子模组 '$name' ($url) 已为路径 '$sm_path' 注册"
+
+#~ msgid "Change flags"
+#~ msgstr "修改参数"
+
+#~ msgid ""
+#~ "NOTE: no more files to clean; press \"t\" to toggle flags of git-clean."
+#~ msgstr "注意：没有要清理的文件；尝试按 \"t\" 切换 git-clean 的选项。"
+
+#~ msgid "Failed to recurse into submodule path '$prefix$sm_path'"
+#~ msgstr "无法递归进子模组路径 '$prefix$sm_path'"
#~ msgid "git shortlog [-n] [-s] [-e] [-w] [rev-opts] [--] [<commit-id>... ]"
#~ msgstr "git shortlog [-n] [-s] [-e] [-w] [版本选项] [--] [<提交号>... ]"
#~ msgid "new files yourself (see 'git help status')."
#~ msgstr "（参见 'git help status'）。"
-#, fuzzy
-#~ msgid "aaaSynchronizing submodule url for '$prefix$sm_path'"
-#~ msgstr "为 '$prefix$sm_path' 同步子模组 url"
-
#~ msgid "use any ref in .git/refs"
#~ msgstr "使用 .git/refs 里的任意引用"
return show_date(date, tz, mode);
}
-void pp_user_info(const struct pretty_print_context *pp,
+void pp_user_info(struct pretty_print_context *pp,
const char *what, struct strbuf *sb,
const char *line, const char *encoding)
{
map_user(pp->mailmap, &mailbuf, &maillen, &namebuf, &namelen);
if (pp->fmt == CMIT_FMT_EMAIL) {
+ if (pp->from_ident) {
+ struct strbuf buf = STRBUF_INIT;
+
+ strbuf_addstr(&buf, "From: ");
+ strbuf_add(&buf, namebuf, namelen);
+ strbuf_addstr(&buf, " <");
+ strbuf_add(&buf, mailbuf, maillen);
+ strbuf_addstr(&buf, ">\n");
+ string_list_append(&pp->in_body_headers,
+ strbuf_detach(&buf, NULL));
+
+ mailbuf = pp->from_ident->mail_begin;
+ maillen = pp->from_ident->mail_end - mailbuf;
+ namebuf = pp->from_ident->name_begin;
+ namelen = pp->from_ident->name_end - namebuf;
+ }
+
strbuf_addstr(sb, "From: ");
if (needs_rfc2047_encoding(namebuf, namelen, RFC2047_ADDRESS)) {
add_rfc2047(sb, namebuf, namelen,
free(context.signature_check.signer);
}
-static void pp_header(const struct pretty_print_context *pp,
+static void pp_header(struct pretty_print_context *pp,
const char *encoding,
const struct commit *commit,
const char **msg_p,
}
}
-void pp_title_line(const struct pretty_print_context *pp,
+void pp_title_line(struct pretty_print_context *pp,
const char **msg_p,
struct strbuf *sb,
const char *encoding,
}
strbuf_addch(sb, '\n');
+ if (need_8bit_cte == 0) {
+ int i;
+ for (i = 0; i < pp->in_body_headers.nr; i++) {
+ if (has_non_ascii(pp->in_body_headers.items[i].string)) {
+ need_8bit_cte = 1;
+ break;
+ }
+ }
+ }
+
if (need_8bit_cte > 0) {
const char *header_fmt =
"MIME-Version: 1.0\n"
if (pp->fmt == CMIT_FMT_EMAIL) {
strbuf_addch(sb, '\n');
}
+
+ if (pp->in_body_headers.nr) {
+ int i;
+ for (i = 0; i < pp->in_body_headers.nr; i++) {
+ strbuf_addstr(sb, pp->in_body_headers.items[i].string);
+ free(pp->in_body_headers.items[i].string);
+ }
+ string_list_clear(&pp->in_body_headers, 0);
+ strbuf_addch(sb, '\n');
+ }
+
strbuf_release(&title);
}
-void pp_remainder(const struct pretty_print_context *pp,
+void pp_remainder(struct pretty_print_context *pp,
const char **msg_p,
struct strbuf *sb,
int indent)
}
}
-void pretty_print_commit(const struct pretty_print_context *pp,
+void pretty_print_commit(struct pretty_print_context *pp,
const struct commit *commit,
struct strbuf *sb)
{
fputc(terminator, fp);
}
-static const char *path_relative(const char *in, int len,
- struct strbuf *sb, const char *prefix,
- int prefix_len);
-
-void write_name_quoted_relative(const char *name, size_t len,
- const char *prefix, size_t prefix_len,
+void write_name_quoted_relative(const char *name, const char *prefix,
FILE *fp, int terminator)
{
struct strbuf sb = STRBUF_INIT;
- name = path_relative(name, len, &sb, prefix, prefix_len);
+ name = relative_path(name, prefix, &sb);
write_name_quoted(name, fp, terminator);
strbuf_release(&sb);
}
-/*
- * Give path as relative to prefix.
- *
- * The strbuf may or may not be used, so do not assume it contains the
- * returned path.
- */
-static const char *path_relative(const char *in, int len,
- struct strbuf *sb, const char *prefix,
- int prefix_len)
-{
- int off, i;
-
- if (len < 0)
- len = strlen(in);
- if (prefix_len < 0) {
- if (prefix)
- prefix_len = strlen(prefix);
- else
- prefix_len = 0;
- }
-
- off = 0;
- i = 0;
- while (i < prefix_len && i < len && prefix[i] == in[i]) {
- if (prefix[i] == '/')
- off = i + 1;
- i++;
- }
- in += off;
- len -= off;
-
- if (i >= prefix_len)
- return in;
-
- strbuf_reset(sb);
- strbuf_grow(sb, len);
-
- while (i < prefix_len) {
- if (prefix[i] == '/')
- strbuf_addstr(sb, "../");
- i++;
- }
- strbuf_add(sb, in, len);
-
- return sb->buf;
-}
-
/* quote path as relative to the given prefix */
-char *quote_path_relative(const char *in, int len,
- struct strbuf *out, const char *prefix)
+char *quote_path_relative(const char *in, const char *prefix,
+ struct strbuf *out)
{
struct strbuf sb = STRBUF_INIT;
- const char *rel = path_relative(in, len, &sb, prefix, -1);
+ const char *rel = relative_path(in, prefix, &sb);
strbuf_reset(out);
quote_c_style_counted(rel, strlen(rel), out, NULL, 0);
strbuf_release(&sb);
- if (!out->len)
- strbuf_addstr(out, "./");
-
return out->buf;
}
extern void write_name_quoted(const char *name, FILE *, int terminator);
extern void write_name_quotedpfx(const char *pfx, size_t pfxlen,
const char *name, FILE *, int terminator);
-extern void write_name_quoted_relative(const char *name, size_t len,
- const char *prefix, size_t prefix_len,
+extern void write_name_quoted_relative(const char *name, const char *prefix,
FILE *fp, int terminator);
/* quote path as relative to the given prefix */
-extern char *quote_path_relative(const char *in, int len,
- struct strbuf *out, const char *prefix);
+extern char *quote_path_relative(const char *in, const char *prefix,
+ struct strbuf *out);
/* quoting as a string literal for other languages */
extern void perl_quote_print(FILE *stream, const char *src);
}
/*
- * Remove all cache ententries marked for removal, that is where
+ * Remove all cache entries marked for removal, that is where
* CE_REMOVE is set in ce_flags. This is much more effective than
* calling remove_index_entry_at() for each entry to be removed.
*/
return ce;
}
-int ce_same_name(struct cache_entry *a, struct cache_entry *b)
+int ce_same_name(const struct cache_entry *a, const struct cache_entry *b)
{
int len = ce_namelen(a);
return ce_namelen(b) == len && !memcmp(a->name, b->name, len);
}
/*
- * Opportunisticly update the index but do not complain if we can't
+ * Opportunistically update the index but do not complain if we can't
*/
void update_index_if_able(struct index_state *istate, struct lock_file *lockfile)
{
static int do_one_ref(struct ref_entry *entry, void *cb_data)
{
struct ref_entry_cb *data = cb_data;
+ struct ref_entry *old_current_ref;
int retval;
+
if (prefixcmp(entry->name, data->base))
return 0;
!ref_resolves_to_object(entry))
return 0;
+ /* Store the old value, in case this is a recursive call: */
+ old_current_ref = current_ref;
current_ref = entry;
retval = data->fn(entry->name + data->trim, entry->u.value.sha1,
entry->flag, data->cb_data);
- current_ref = NULL;
+ current_ref = old_current_ref;
return retval;
}
{
struct packed_ref_cache *packed_ref_cache;
- /* Discard the old cache because it might be invalid: */
- clear_packed_ref_cache(&ref_cache);
if (hold_lock_file_for_update(&packlock, git_path("packed-refs"), flags) < 0)
return -1;
- /* Read the current packed-refs while holding the lock: */
+ /*
+ * Get the current packed-refs while holding the lock. If the
+ * packed-refs file has been modified since we last read it,
+ * this will automatically invalidate the cache and re-read
+ * the packed-refs file.
+ */
packed_ref_cache = get_packed_ref_cache(&ref_cache);
packed_ref_cache->lock = &packlock;
/* Increment the reference count to prevent it from being freed: */
#include "run-command.h"
#include "pkt-line.h"
#include "sideband.h"
+#include "argv-array.h"
static struct remote *remote;
static const char *url; /* always ends with a trailing slash */
static int push_git(struct discovery *heads, int nr_spec, char **specs)
{
struct rpc_state rpc;
- const char **argv;
- int argc = 0, i, err;
+ int i, err;
+ struct argv_array args;
+
+ argv_array_init(&args);
+ argv_array_pushl(&args, "send-pack", "--stateless-rpc", "--helper-status",
+ NULL);
- argv = xmalloc((10 + nr_spec) * sizeof(char*));
- argv[argc++] = "send-pack";
- argv[argc++] = "--stateless-rpc";
- argv[argc++] = "--helper-status";
if (options.thin)
- argv[argc++] = "--thin";
+ argv_array_push(&args, "--thin");
if (options.dry_run)
- argv[argc++] = "--dry-run";
+ argv_array_push(&args, "--dry-run");
if (options.verbosity == 0)
- argv[argc++] = "--quiet";
+ argv_array_push(&args, "--quiet");
else if (options.verbosity > 1)
- argv[argc++] = "--verbose";
- argv[argc++] = options.progress ? "--progress" : "--no-progress";
- argv[argc++] = url;
+ argv_array_push(&args, "--verbose");
+ argv_array_push(&args, options.progress ? "--progress" : "--no-progress");
+ argv_array_push(&args, url);
for (i = 0; i < nr_spec; i++)
- argv[argc++] = specs[i];
- argv[argc++] = NULL;
+ argv_array_push(&args, specs[i]);
memset(&rpc, 0, sizeof(rpc));
rpc.service_name = "git-receive-pack",
- rpc.argv = argv;
+ rpc.argv = args.argv;
err = rpc_service(&rpc, heads);
if (rpc.result.len)
write_or_die(1, rpc.result.buf, rpc.result.len);
strbuf_release(&rpc.result);
- free(argv);
+ argv_array_clear(&args);
return err;
}
free(sent_tips.tip);
}
+static void prepare_ref_index(struct string_list *ref_index, struct ref *ref)
+{
+ for ( ; ref; ref = ref->next)
+ string_list_append_nodup(ref_index, ref->name)->util = ref;
+
+ sort_string_list(ref_index);
+}
+
/*
* Given the set of refs the local repository has, the set of refs the
* remote repository has, and the refspec used for push, determine
int errs;
static const char *default_refspec[] = { ":", NULL };
struct ref *ref, **dst_tail = tail_ref(dst);
+ struct string_list dst_ref_index = STRING_LIST_INIT_NODUP;
if (!nr_refspec) {
nr_refspec = 1;
/* pick the remainder */
for (ref = src; ref; ref = ref->next) {
+ struct string_list_item *dst_item;
struct ref *dst_peer;
const struct refspec *pat = NULL;
char *dst_name;
if (!dst_name)
continue;
- dst_peer = find_ref_by_name(*dst, dst_name);
+ if (!dst_ref_index.nr)
+ prepare_ref_index(&dst_ref_index, *dst);
+
+ dst_item = string_list_lookup(&dst_ref_index, dst_name);
+ dst_peer = dst_item ? dst_item->util : NULL;
if (dst_peer) {
if (dst_peer->peer_ref)
/* We're already sending something to this ref. */
/* Create a new one and link it */
dst_peer = make_linked_ref(dst_name, &dst_tail);
hashcpy(dst_peer->new_sha1, ref->new_sha1);
+ string_list_insert(&dst_ref_index,
+ dst_peer->name)->util = dst_peer;
}
dst_peer->peer_ref = copy_ref(ref);
dst_peer->force = pat->force;
free(dst_name);
}
+ string_list_clear(&dst_ref_index, 0);
+
if (flags & MATCH_REFS_FOLLOW_TAGS)
add_missing_tags(src, dst, &dst_tail);
if (send_prune) {
+ struct string_list src_ref_index = STRING_LIST_INIT_NODUP;
/* check for missing refs on the remote */
for (ref = *dst; ref; ref = ref->next) {
char *src_name;
src_name = get_ref_match(rs, nr_refspec, ref, send_mirror, FROM_DST, NULL);
if (src_name) {
- if (!find_ref_by_name(src, src_name))
+ if (!src_ref_index.nr)
+ prepare_ref_index(&src_ref_index, src);
+ if (!string_list_has_string(&src_ref_index,
+ src_name))
ref->peer_ref = alloc_delete_ref();
free(src_name);
}
}
+ string_list_clear(&src_ref_index, 0);
}
if (errs)
return -1;
{
mmfile_t mmfile[3] = {{NULL}};
mmbuffer_t result = {NULL, 0};
- struct cache_entry *ce;
+ const struct cache_entry *ce;
int pos, len, i, hunk_no;
struct rerere_io_mem io;
int marker_size = ll_merge_marker_size(path);
static int check_one_conflict(int i, int *type)
{
- struct cache_entry *e = active_cache[i];
+ const struct cache_entry *e = active_cache[i];
if (!ce_stage(e)) {
*type = RESOLVED;
/* Only handle regular files with both stages #2 and #3 */
if (i + 1 < active_nr) {
- struct cache_entry *e2 = active_cache[i];
- struct cache_entry *e3 = active_cache[i + 1];
+ const struct cache_entry *e2 = active_cache[i];
+ const struct cache_entry *e3 = active_cache[i + 1];
if (ce_stage(e2) == 2 &&
ce_stage(e3) == 3 &&
ce_same_name(e, e3) &&
for (i = 0; i < active_nr;) {
int conflict_type;
- struct cache_entry *e = active_cache[i];
+ const struct cache_entry *e = active_cache[i];
i = check_one_conflict(i, &conflict_type);
if (conflict_type == THREE_STAGED)
string_list_insert(conflict, (const char *)e->name);
for (i = 0; i < active_nr;) {
int conflict_type;
- struct cache_entry *e = active_cache[i];
+ const struct cache_entry *e = active_cache[i];
i = check_one_conflict(i, &conflict_type);
if (conflict_type == PUNTED)
string_list_insert(merge_rr, (const char *)e->name);
int unmerge_index_entry_at(struct index_state *istate, int pos)
{
- struct cache_entry *ce;
+ const struct cache_entry *ce;
struct string_list_item *item;
struct resolve_undo_info *ru;
int i, err = 0, matched;
return;
for (i = 0; i < istate->cache_nr; i++) {
- struct cache_entry *ce = istate->cache[i];
+ const struct cache_entry *ce = istate->cache[i];
if (ce->ce_flags & CE_MATCHED)
i = unmerge_index_entry_at(istate, i);
}
return;
for (i = 0; i < istate->cache_nr; i++) {
- struct cache_entry *ce = istate->cache[i];
+ const struct cache_entry *ce = istate->cache[i];
if (!match_pathspec(pathspec, ce->name, ce_namelen(ce), 0, NULL))
continue;
i = unmerge_index_entry_at(istate, i);
if (!active_nr)
read_cache();
for (i = 0; i < active_nr; i++) {
- struct cache_entry *ce = active_cache[i];
+ const struct cache_entry *ce = active_cache[i];
if (!ce_stage(ce))
continue;
if (ce_path_match(ce, &revs->prune_data)) {
int numbered_files;
int reroll_count;
char *message_id;
+ struct ident_split from_ident;
struct string_list *ref_message_ids;
int add_signoff;
const char *extra_headers;
static inline void dup_devnull(int to)
{
int fd = open("/dev/null", O_RDWR);
- dup2(fd, to);
+ if (fd < 0)
+ die_errno(_("open /dev/null failed"));
+ if (dup2(fd, to) < 0)
+ die_errno(_("dup2(%d,%d) failed"), fd, to);
close(fd);
}
#endif
int run_command(struct child_process *);
extern char *find_hook(const char *name);
+LAST_ARG_MUST_BE_NULL
extern int run_hook(const char *index_file, const char *name, ...);
#define RUN_COMMAND_NO_STDIN 1
int i;
strbuf_addstr(msgbuf, "\nConflicts:\n");
for (i = 0; i < active_nr;) {
- struct cache_entry *ce = active_cache[i++];
+ const struct cache_entry *ce = active_cache[i++];
if (ce_stage(ce)) {
strbuf_addch(msgbuf, '\t');
strbuf_addstr(msgbuf, ce->name);
active_cache_tree = cache_tree();
if (!cache_tree_fully_valid(active_cache_tree))
- if (cache_tree_update(active_cache_tree, active_cache,
- active_nr, 0))
+ if (cache_tree_update(active_cache_tree,
+ (const struct cache_entry * const *)active_cache,
+ active_nr, 0))
return error(_("Unable to update cache tree\n"));
return !hashcmp(active_cache_tree->sha1, head_commit->tree->object.sha1);
void setup_work_tree(void)
{
+ struct strbuf sb = STRBUF_INIT;
const char *work_tree, *git_dir;
static int initialized = 0;
if (getenv(GIT_WORK_TREE_ENVIRONMENT))
setenv(GIT_WORK_TREE_ENVIRONMENT, ".", 1);
- set_git_dir(relative_path(git_dir, work_tree));
+ set_git_dir(relative_path(git_dir, work_tree, &sb));
initialized = 1;
+
+ strbuf_release(&sb);
}
static int check_repository_format_gently(const char *gitdir, int *nongit_ok)
return suspect;
return read_gitfile(suspect);
}
+
+/* if any standard file descriptor is missing open it to /dev/null */
+void sanitize_stdfds(void)
+{
+ int fd = open("/dev/null", O_RDWR, 0);
+ while (fd != -1 && fd < 2)
+ fd = dup(fd);
+ if (fd == -1)
+ die_errno("open /dev/null or dup failed");
+ if (fd > 2)
+ close(fd);
+}
}
}
+static int stat_sha1_file(const unsigned char *sha1, struct stat *st)
+{
+ char *name = sha1_file_name(sha1);
+ struct alternate_object_database *alt;
+
+ if (!lstat(name, st))
+ return 0;
+
+ prepare_alt_odb();
+ errno = ENOENT;
+ for (alt = alt_odb_list; alt; alt = alt->next) {
+ name = alt->name;
+ fill_sha1_path(name, sha1);
+ if (!lstat(alt->base, st))
+ return 0;
+ }
+
+ return -1;
+}
+
static int open_sha1_file(const unsigned char *sha1)
{
int fd;
return type;
}
-
#define POI_STACK_PREALLOC 64
-static int packed_object_info(struct packed_git *p, off_t obj_offset,
- unsigned long *sizep, int *rtype)
+static enum object_type packed_to_object_type(struct packed_git *p,
+ off_t obj_offset,
+ enum object_type type,
+ struct pack_window **w_curs,
+ off_t curpos)
{
- struct pack_window *w_curs = NULL;
- unsigned long size;
- off_t curpos = obj_offset;
- enum object_type type;
off_t small_poi_stack[POI_STACK_PREALLOC];
off_t *poi_stack = small_poi_stack;
int poi_stack_nr = 0, poi_stack_alloc = POI_STACK_PREALLOC;
- type = unpack_object_header(p, &w_curs, &curpos, &size);
-
- if (rtype)
- *rtype = type; /* representation type */
-
- if (sizep) {
- if (type == OBJ_OFS_DELTA || type == OBJ_REF_DELTA) {
- off_t tmp_pos = curpos;
- off_t base_offset = get_delta_base(p, &w_curs, &tmp_pos,
- type, obj_offset);
- if (!base_offset) {
- type = OBJ_BAD;
- goto out;
- }
- *sizep = get_size_from_delta(p, &w_curs, tmp_pos);
- if (*sizep == 0) {
- type = OBJ_BAD;
- goto out;
- }
- } else {
- *sizep = size;
- }
- }
-
while (type == OBJ_OFS_DELTA || type == OBJ_REF_DELTA) {
off_t base_offset;
+ unsigned long size;
/* Push the object we're going to leave behind */
if (poi_stack_nr >= poi_stack_alloc && poi_stack == small_poi_stack) {
poi_stack_alloc = alloc_nr(poi_stack_nr);
}
poi_stack[poi_stack_nr++] = obj_offset;
/* If parsing the base offset fails, just unwind */
- base_offset = get_delta_base(p, &w_curs, &curpos, type, obj_offset);
+ base_offset = get_delta_base(p, w_curs, &curpos, type, obj_offset);
if (!base_offset)
goto unwind;
curpos = obj_offset = base_offset;
- type = unpack_object_header(p, &w_curs, &curpos, &size);
+ type = unpack_object_header(p, w_curs, &curpos, &size);
if (type <= OBJ_NONE) {
/* If getting the base itself fails, we first
* retry the base, otherwise unwind */
out:
if (poi_stack != small_poi_stack)
free(poi_stack);
- unuse_pack(&w_curs);
return type;
unwind:
goto out;
}
+static int packed_object_info(struct packed_git *p, off_t obj_offset,
+ struct object_info *oi)
+{
+ struct pack_window *w_curs = NULL;
+ unsigned long size;
+ off_t curpos = obj_offset;
+ enum object_type type;
+
+ /*
+ * We always get the representation type, but only convert it to
+ * a "real" type later if the caller is interested.
+ */
+ type = unpack_object_header(p, &w_curs, &curpos, &size);
+
+ if (oi->sizep) {
+ if (type == OBJ_OFS_DELTA || type == OBJ_REF_DELTA) {
+ off_t tmp_pos = curpos;
+ off_t base_offset = get_delta_base(p, &w_curs, &tmp_pos,
+ type, obj_offset);
+ if (!base_offset) {
+ type = OBJ_BAD;
+ goto out;
+ }
+ *oi->sizep = get_size_from_delta(p, &w_curs, tmp_pos);
+ if (*oi->sizep == 0) {
+ type = OBJ_BAD;
+ goto out;
+ }
+ } else {
+ *oi->sizep = size;
+ }
+ }
+
+ if (oi->disk_sizep) {
+ struct revindex_entry *revidx = find_pack_revindex(p, obj_offset);
+ *oi->disk_sizep = revidx[1].offset - obj_offset;
+ }
+
+ if (oi->typep) {
+ *oi->typep = packed_to_object_type(p, obj_offset, type, &w_curs, curpos);
+ if (*oi->typep < 0) {
+ type = OBJ_BAD;
+ goto out;
+ }
+ }
+
+out:
+ unuse_pack(&w_curs);
+ return type;
+}
+
static void *unpack_compressed_entry(struct packed_git *p,
struct pack_window **w_curs,
off_t curpos,
}
-static int sha1_loose_object_info(const unsigned char *sha1, unsigned long *sizep)
+static int sha1_loose_object_info(const unsigned char *sha1,
+ struct object_info *oi)
{
int status;
unsigned long mapsize, size;
git_zstream stream;
char hdr[32];
+ /*
+ * If we don't care about type or size, then we don't
+ * need to look inside the object at all.
+ */
+ if (!oi->typep && !oi->sizep) {
+ if (oi->disk_sizep) {
+ struct stat st;
+ if (stat_sha1_file(sha1, &st) < 0)
+ return -1;
+ *oi->disk_sizep = st.st_size;
+ }
+ return 0;
+ }
+
map = map_sha1_file(sha1, &mapsize);
if (!map)
return -1;
+ if (oi->disk_sizep)
+ *oi->disk_sizep = mapsize;
if (unpack_sha1_header(&stream, map, mapsize, hdr, sizeof(hdr)) < 0)
status = error("unable to unpack %s header",
sha1_to_hex(sha1));
else if ((status = parse_sha1_header(hdr, &size)) < 0)
status = error("unable to parse %s header", sha1_to_hex(sha1));
- else if (sizep)
- *sizep = size;
+ else if (oi->sizep)
+ *oi->sizep = size;
git_inflate_end(&stream);
munmap(map, mapsize);
- return status;
+ if (oi->typep)
+ *oi->typep = status;
+ return 0;
}
/* returns enum object_type or negative */
{
struct cached_object *co;
struct pack_entry e;
- int status, rtype;
+ int rtype;
co = find_cached_object(sha1);
if (co) {
+ if (oi->typep)
+ *(oi->typep) = co->type;
if (oi->sizep)
*(oi->sizep) = co->size;
+ if (oi->disk_sizep)
+ *(oi->disk_sizep) = 0;
oi->whence = OI_CACHED;
- return co->type;
+ return 0;
}
if (!find_pack_entry(sha1, &e)) {
/* Most likely it's a loose object. */
- status = sha1_loose_object_info(sha1, oi->sizep);
- if (status >= 0) {
+ if (!sha1_loose_object_info(sha1, oi)) {
oi->whence = OI_LOOSE;
- return status;
+ return 0;
}
/* Not a loose object; someone else may have just packed it. */
reprepare_packed_git();
if (!find_pack_entry(sha1, &e))
- return status;
+ return -1;
}
- status = packed_object_info(e.p, e.offset, oi->sizep, &rtype);
- if (status < 0) {
+ rtype = packed_object_info(e.p, e.offset, oi);
+ if (rtype < 0) {
mark_bad_packed_object(e.p, sha1);
- status = sha1_object_info_extended(sha1, oi);
+ return sha1_object_info_extended(sha1, oi);
} else if (in_delta_base_cache(e.p, e.offset)) {
oi->whence = OI_DBCACHED;
} else {
rtype == OBJ_OFS_DELTA);
}
- return status;
+ return 0;
}
int sha1_object_info(const unsigned char *sha1, unsigned long *sizep)
{
- struct object_info oi;
+ enum object_type type;
+ struct object_info oi = {NULL};
+ oi.typep = &type;
oi.sizep = sizep;
- return sha1_object_info_extended(sha1, &oi);
+ if (sha1_object_info_extended(sha1, &oi) < 0)
+ return -1;
+ return type;
}
static void *read_packed_sha1(const unsigned char *sha1,
}
if (!ds->candidate_ok) {
- /* discard the candidate; we know it does not satisify fn */
+ /* discard the candidate; we know it does not satisfy fn */
hashcpy(ds->candidate, current);
ds->candidate_checked = 0;
return;
"\n"
"where \"$br\" is somehow empty and a 40-hex ref is created. Please\n"
"examine these refs and maybe delete them. Turn this message off by\n"
- "running \"git config advice.object_name_warning false\"");
+ "running \"git config advice.objectNameWarning false\"");
unsigned char tmp_sha1[20];
char *real_ref = NULL;
int refs_found = 0;
int at, reflog_len, nth_prior = 0;
if (len == 40 && !get_sha1_hex(str, sha1)) {
- refs_found = dwim_ref(str, len, tmp_sha1, &real_ref);
- if (refs_found > 0 && warn_ambiguous_refs) {
- warning(warn_msg, len, str);
- if (advice_object_name_warning)
- fprintf(stderr, "%s\n", _(object_name_msg));
+ if (warn_on_object_refname_ambiguity) {
+ refs_found = dwim_ref(str, len, tmp_sha1, &real_ref);
+ if (refs_found > 0 && warn_ambiguous_refs) {
+ warning(warn_msg, len, str);
+ if (advice_object_name_warning)
+ fprintf(stderr, "%s\n", _(object_name_msg));
+ }
+ free(real_ref);
}
- free(real_ref);
return 0;
}
const char *filename)
{
struct stat st;
- struct cache_entry *ce;
+ const struct cache_entry *ce;
int pos;
unsigned namelen = strlen(filename);
unsigned fullnamelen;
*/
if (name[0] == ':') {
int stage = 0;
- struct cache_entry *ce;
+ const struct cache_entry *ce;
char *new_path = NULL;
int pos;
if (!only_to_die && namelen > 2 && name[1] == '/') {
continue;
*pointer = cur_depth;
}
- if (cur_depth < depth) {
- if (p->next)
- add_object_array(&p->item->object,
- NULL, &stack);
- else {
- commit = p->item;
- cur_depth = *(int *)commit->util;
- }
- } else {
- commit_list_insert(p->item, &result);
- p->item->object.flags |= shallow_flag;
+ if (p->next)
+ add_object_array(&p->item->object,
+ NULL, &stack);
+ else {
+ commit = p->item;
+ cur_depth = *(int *)commit->util;
}
}
}
char *prog;
const char **user_argv;
struct commands *cmd;
- int devnull_fd;
int count;
git_setup_gettext();
/*
* Always open file descriptors 0/1/2 to avoid clobbering files
- * in die(). It also avoids not messing up when the pipes are
- * dup'ed onto stdin/stdout/stderr in the child processes we spawn.
+ * in die(). It also avoids messing up when the pipes are dup'ed
+ * onto stdin/stdout/stderr in the child processes we spawn.
*/
- devnull_fd = open("/dev/null", O_RDWR);
- while (devnull_fd >= 0 && devnull_fd <= 2)
- devnull_fd = dup(devnull_fd);
- if (devnull_fd == -1)
- die_errno("opening /dev/null failed");
- close (devnull_fd);
+ sanitize_stdfds();
/*
* Special hack to pretend to be a CVS server
unsigned long size;
int status;
+ oi->typep = type;
oi->sizep = &size;
status = sha1_object_info_extended(sha1, oi);
if (status < 0)
return stream_error;
- *type = status;
switch (oi->whence) {
case OI_LOOSE:
struct stream_filter *filter)
{
struct git_istream *st;
- struct object_info oi;
+ struct object_info oi = {NULL};
const unsigned char *real = lookup_replace_object(sha1);
enum input_source src = istream_source(real, type, &oi);
return NULL;
}
}
- if (st && filter) {
+ if (filter) {
/* Add "&& !is_null_stream_filter(filter)" for performance */
struct git_istream *nst = attach_stream_filter(st, filter);
if (!nst)
while ((commit = get_revision(rev))) {
struct pretty_print_context ctx = {0};
ctx.date_mode = rev->date_mode;
+ ctx.output_encoding = get_log_output_encoding();
strbuf_setlen(&sb, 0);
strbuf_addstr(&sb, line_prefix);
if (commit->object.flags & SYMMETRIC_LEFT) {
struct strbuf submodule_path = STRBUF_INIT;
struct strbuf submodule_git_dir = STRBUF_INIT;
struct strbuf submodule_prefix = STRBUF_INIT;
- struct cache_entry *ce = active_cache[i];
+ const struct cache_entry *ce = active_cache[i];
const char *git_dir, *name, *default_argv;
if (!S_ISGITLINK(ce->ce_mode))
# sourced from t8001-annotate.sh and t8002-blame.sh.
check_count () {
- head=
- case "$1" in -h) head="$2"; shift; shift ;; esac
- echo "$PROG file $head" >&4
- $PROG file $head >.result || return 1
- cat .result | perl -e '
+ head= &&
+ file='file' &&
+ options= &&
+ while :
+ do
+ case "$1" in
+ -h) head="$2"; shift; shift ;;
+ -f) file="$2"; shift; shift ;;
+ -*) options="$options $1"; shift ;;
+ *) break ;;
+ esac
+ done &&
+ echo "$PROG $options $file $head" >&4 &&
+ $PROG $options $file $head >actual &&
+ perl -e '
my %expect = (@ARGV);
my %count = map { $_ => 0 } keys %expect;
while (<STDIN>) {
print STDERR "Author $author (expected $value, attributed $count) $ok\n";
}
exit($bad);
- ' "$@"
+ ' "$@" <actual
}
-test_expect_success \
- 'prepare reference tree' \
- 'echo "1A quick brown fox jumps over the" >file &&
- echo "lazy dog" >>file &&
- git add file &&
- GIT_AUTHOR_NAME="A" GIT_AUTHOR_EMAIL="A@test.git" git commit -a -m "Initial."'
-
-test_expect_success \
- 'check all lines blamed on A' \
- 'check_count A 2'
-
-test_expect_success \
- 'Setup new lines blamed on B' \
- 'echo "2A quick brown fox jumps over the" >>file &&
- echo "lazy dog" >> file &&
- GIT_AUTHOR_NAME="B" GIT_AUTHOR_EMAIL="B@test.git" git commit -a -m "Second."'
-
-test_expect_success \
- 'Two lines blamed on A, two on B' \
- 'check_count A 2 B 2'
-
-test_expect_success \
- 'merge-setup part 1' \
- 'git checkout -b branch1 master &&
- echo "3A slow green fox jumps into the" >> file &&
- echo "well." >> file &&
- GIT_AUTHOR_NAME="B1" GIT_AUTHOR_EMAIL="B1@test.git" git commit -a -m "Branch1-1"'
-
-test_expect_success \
- 'Two lines blamed on A, two on B, two on B1' \
- 'check_count A 2 B 2 B1 2'
-
-test_expect_success \
- 'merge-setup part 2' \
- 'git checkout -b branch2 master &&
- sed -e "s/2A quick brown/4A quick brown lazy dog/" < file > file.new &&
- mv file.new file &&
- GIT_AUTHOR_NAME="B2" GIT_AUTHOR_EMAIL="B2@test.git" git commit -a -m "Branch2-1"'
-
-test_expect_success \
- 'Two lines blamed on A, one on B, one on B2' \
- 'check_count A 2 B 1 B2 1'
-
-test_expect_success \
- 'merge-setup part 3' \
- 'git pull . branch1'
-
-test_expect_success \
- 'Two lines blamed on A, one on B, two on B1, one on B2' \
- 'check_count A 2 B 1 B1 2 B2 1'
-
-test_expect_success \
- 'Annotating an old revision works' \
- 'check_count -h master A 2 B 2'
-
-test_expect_success \
- 'Annotating an old revision works' \
- 'check_count -h master^ A 2'
-
-test_expect_success \
- 'merge-setup part 4' \
- 'echo "evil merge." >>file &&
- git commit -a --amend'
-
-test_expect_success \
- 'Two lines blamed on A, one on B, two on B1, one on B2, one on A U Thor' \
- 'check_count A 2 B 1 B1 2 B2 1 "A U Thor" 1'
-
-test_expect_success \
- 'an incomplete line added' \
- 'echo "incomplete" | tr -d "\\012" >>file &&
- GIT_AUTHOR_NAME="C" GIT_AUTHOR_EMAIL="C@test.git" git commit -a -m "Incomplete"'
-
-test_expect_success \
- 'With incomplete lines.' \
- 'check_count A 2 B 1 B1 2 B2 1 "A U Thor" 1 C 1'
-
-test_expect_success \
- 'some edit' \
- 'mv file file.orig &&
- {
- cat file.orig &&
- echo
- } | sed -e "s/^3A/99/" -e "/^1A/d" -e "/^incomplete/d" > file &&
- echo "incomplete" | tr -d "\\012" >>file &&
- GIT_AUTHOR_NAME="D" GIT_AUTHOR_EMAIL="D@test.git" git commit -a -m "edit"'
-
-test_expect_success \
- 'some edit' \
- 'check_count A 1 B 1 B1 1 B2 1 "A U Thor" 1 C 1 D 1'
-
-test_expect_success \
- 'an obfuscated email added' \
- 'echo "No robots allowed" > file.new &&
- cat file >> file.new &&
- mv file.new file &&
- GIT_AUTHOR_NAME="E" GIT_AUTHOR_EMAIL="E at test dot git" git commit -a -m "norobots"'
-
-test_expect_success \
- 'obfuscated email parsed' \
- 'check_count A 1 B 1 B1 1 B2 1 "A U Thor" 1 C 1 D 1 E 1'
+test_expect_success 'setup A lines' '
+ echo "1A quick brown fox jumps over the" >file &&
+ echo "lazy dog" >>file &&
+ git add file &&
+ GIT_AUTHOR_NAME="A" GIT_AUTHOR_EMAIL="A@test.git" \
+ git commit -a -m "Initial."
+'
+
+test_expect_success 'blame 1 author' '
+ check_count A 2
+'
+
+test_expect_success 'setup B lines' '
+ echo "2A quick brown fox jumps over the" >>file &&
+ echo "lazy dog" >>file &&
+ GIT_AUTHOR_NAME="B" GIT_AUTHOR_EMAIL="B@test.git" \
+ git commit -a -m "Second."
+'
+
+test_expect_success 'blame 2 authors' '
+ check_count A 2 B 2
+'
+
+test_expect_success 'setup B1 lines (branch1)' '
+ git checkout -b branch1 master &&
+ echo "3A slow green fox jumps into the" >>file &&
+ echo "well." >>file &&
+ GIT_AUTHOR_NAME="B1" GIT_AUTHOR_EMAIL="B1@test.git" \
+ git commit -a -m "Branch1-1"
+'
+
+test_expect_success 'blame 2 authors + 1 branch1 author' '
+ check_count A 2 B 2 B1 2
+'
+
+test_expect_success 'setup B2 lines (branch2)' '
+ git checkout -b branch2 master &&
+ sed -e "s/2A quick brown/4A quick brown lazy dog/" <file >file.new &&
+ mv file.new file &&
+ GIT_AUTHOR_NAME="B2" GIT_AUTHOR_EMAIL="B2@test.git" \
+ git commit -a -m "Branch2-1"
+'
+
+test_expect_success 'blame 2 authors + 1 branch2 author' '
+ check_count A 2 B 1 B2 1
+'
+
+test_expect_success 'merge branch1 & branch2' '
+ git pull . branch1
+'
+
+test_expect_success 'blame 2 authors + 2 merged-in authors' '
+ check_count A 2 B 1 B1 2 B2 1
+'
+
+test_expect_success 'blame ancestor' '
+ check_count -h master A 2 B 2
+'
+
+test_expect_success 'blame great-ancestor' '
+ check_count -h master^ A 2
+'
+
+test_expect_success 'setup evil merge' '
+ echo "evil merge." >>file &&
+ git commit -a --amend
+'
+
+test_expect_success 'blame evil merge' '
+ check_count A 2 B 1 B1 2 B2 1 "A U Thor" 1
+'
+
+test_expect_success 'setup incomplete line' '
+ echo "incomplete" | tr -d "\\012" >>file &&
+ GIT_AUTHOR_NAME="C" GIT_AUTHOR_EMAIL="C@test.git" \
+ git commit -a -m "Incomplete"
+'
+
+test_expect_success 'blame incomplete line' '
+ check_count A 2 B 1 B1 2 B2 1 "A U Thor" 1 C 1
+'
+
+test_expect_success 'setup edits' '
+ mv file file.orig &&
+ {
+ cat file.orig &&
+ echo
+ } | sed -e "s/^3A/99/" -e "/^1A/d" -e "/^incomplete/d" >file &&
+ echo "incomplete" | tr -d "\\012" >>file &&
+ GIT_AUTHOR_NAME="D" GIT_AUTHOR_EMAIL="D@test.git" \
+ git commit -a -m "edit"
+'
+
+test_expect_success 'blame edits' '
+ check_count A 1 B 1 B1 1 B2 1 "A U Thor" 1 C 1 D 1
+'
+
+test_expect_success 'setup obfuscated email' '
+ echo "No robots allowed" >file.new &&
+ cat file >>file.new &&
+ mv file.new file &&
+ GIT_AUTHOR_NAME="E" GIT_AUTHOR_EMAIL="E at test dot git" \
+ git commit -a -m "norobots"
+'
+
+test_expect_success 'blame obfuscated email' '
+ check_count A 1 B 1 B1 1 B2 1 "A U Thor" 1 C 1 D 1 E 1
+'
+
+test_expect_success 'blame -L 1 (all)' '
+ check_count -L1 A 1 B 1 B1 1 B2 1 "A U Thor" 1 C 1 D 1 E 1
+'
+
+test_expect_success 'blame -L , (all)' '
+ check_count -L, A 1 B 1 B1 1 B2 1 "A U Thor" 1 C 1 D 1 E 1
+'
+
+test_expect_success 'blame -L X (X to end)' '
+ check_count -L5 B1 1 C 1 D 1 "A U Thor" 1
+'
+
+test_expect_success 'blame -L X, (X to end)' '
+ check_count -L5, B1 1 C 1 D 1 "A U Thor" 1
+'
+
+test_expect_success 'blame -L ,Y (up to Y)' '
+ check_count -L,3 A 1 B2 1 E 1
+'
+
+test_expect_success 'blame -L X,X' '
+ check_count -L3,3 B2 1
+'
+
+test_expect_success 'blame -L X,Y' '
+ check_count -L3,6 B 1 B1 1 B2 1 D 1
+'
+
+test_expect_success 'blame -L Y,X (undocumented)' '
+ check_count -L6,3 B 1 B1 1 B2 1 D 1
+'
+
+test_expect_success 'blame -L X,+1' '
+ check_count -L3,+1 B2 1
+'
+
+test_expect_success 'blame -L X,+N' '
+ check_count -L3,+4 B 1 B1 1 B2 1 D 1
+'
+
+test_expect_success 'blame -L X,-1' '
+ check_count -L3,-1 B2 1
+'
+
+test_expect_success 'blame -L X,-N' '
+ check_count -L6,-4 B 1 B1 1 B2 1 D 1
+'
+
+test_expect_success 'blame -L /RE/ (RE to end)' '
+ check_count -L/evil/ C 1 "A U Thor" 1
+'
+
+test_expect_success 'blame -L /RE/,/RE2/' '
+ check_count -L/robot/,/green/ A 1 B 1 B2 1 D 1 E 1
+'
+
+test_expect_success 'blame -L X,/RE/' '
+ check_count -L5,/evil/ B1 1 D 1 "A U Thor" 1
+'
+
+test_expect_success 'blame -L /RE/,Y' '
+ check_count -L/99/,7 B1 1 D 1 "A U Thor" 1
+'
+
+test_expect_success 'blame -L /RE/,+N' '
+ check_count -L/99/,+3 B1 1 D 1 "A U Thor" 1
+'
+
+test_expect_success 'blame -L /RE/,-N' '
+ check_count -L/99/,-3 B 1 B2 1 D 1
+'
+
+test_expect_success 'blame -L X (X > nlines)' '
+ test_must_fail $PROG -L12345 file
+'
+
+test_expect_success 'blame -L ,Y (Y > nlines)' '
+ test_must_fail $PROG -L,12345 file
+'
+
+test_expect_success 'setup -L :regex' '
+ tr Q "\\t" >hello.c <<-\EOF &&
+ int main(int argc, const char *argv[])
+ {
+ Qputs("hello");
+ }
+ EOF
+ git add hello.c &&
+ GIT_AUTHOR_NAME="F" GIT_AUTHOR_EMAIL="F@test.git" \
+ git commit -m "hello" &&
+
+ mv hello.c hello.orig &&
+ sed -e "/}/ {x; s/$/Qputs(\"goodbye\");/; G;}" <hello.orig |
+ tr Q "\\t" >hello.c &&
+ GIT_AUTHOR_NAME="G" GIT_AUTHOR_EMAIL="G@test.git" \
+ git commit -a -m "goodbye" &&
+
+ mv hello.c hello.orig &&
+ echo "#include <stdio.h>" >hello.c &&
+ cat hello.orig >>hello.c &&
+ tr Q "\\t" >>hello.c <<-\EOF
+ void mail()
+ {
+ Qputs("mail");
+ }
+ EOF
+ GIT_AUTHOR_NAME="H" GIT_AUTHOR_EMAIL="H@test.git" \
+ git commit -a -m "mail"
+'
+
+test_expect_success 'blame -L :literal' '
+ check_count -f hello.c -L:main F 4 G 1
+'
+
+test_expect_success 'blame -L :regex' '
+ check_count -f hello.c "-L:m[a-z][a-z]l" H 4
+'
+
+test_expect_success 'blame -L :nomatch' '
+ test_must_fail $PROG -L:nomatch hello.c
+'
+
+test_expect_success 'blame -L bogus' '
+ test_must_fail $PROG -L file &&
+ test_must_fail $PROG -L1,+ file &&
+ test_must_fail $PROG -L1,- file &&
+ test_must_fail $PROG -LX file &&
+ test_must_fail $PROG -L1,X file &&
+ test_must_fail $PROG -L1,+N file &&
+ test_must_fail $PROG -L1,-N file
+'
/^\s*declare\s+/ and err 'arrays/declare not portable';
/^\s*[^#]\s*which\s/ and err 'which is not portable (please use type)';
/test\s+[^=]*==/ and err '"test a == b" is not portable (please use =)';
+ /^\s*export\s+[^=]*=/ and err '"export FOO=bar" is not portable (please use FOO=bar && export FOO)';
# this resets our $. for each file
close ARGV if eof;
}
# You can set the GITWEB_TEST_INSTALLED environment variable to
# the gitwebdir (the directory where gitweb is installed / deployed to)
- # of an existing gitweb instalation to test that installation,
+ # of an existing gitweb installation to test that installation,
# or simply to pathname of installed gitweb script.
if test -n "$GITWEB_TEST_INSTALLED" ; then
if test -d $GITWEB_TEST_INSTALLED; then
mv sed.script.tmp sed.script
}
-# Replace unhelpful sha1 hashses with their symbolic equivalents
+# Replace unhelpful sha1 hashes with their symbolic equivalents
entag () {
sed -f sed.script
}
echo "$test_count" >>"$perf_results_dir"/$base.subtests
echo "$1" >"$perf_results_dir"/$base.$test_count.descr
if test -z "$verbose"; then
- echo -n "perf $test_count - $1:"
+ printf "%s" "perf $test_count - $1:"
else
echo "perf $test_count - $1:"
fi
if test_run_perf_ "$2"
then
if test -z "$verbose"; then
- echo -n " $i"
+ printf " %s" "$i"
else
echo "* timing run $i/$GIT_PERF_REPEAT_COUNT:"
fi
# shell, and then echo to the fd. We make sure to close it at
# the end, so that the subprocess does get EOF and dies
# properly.
+ #
+ # Similarly, we must keep "out" open so that check-ignore does
+ # not ever get SIGPIPE trying to write to us. Not only would that
+ # produce incorrect results, but then there would be no writer on the
+ # other end of the pipe, and we would potentially block forever trying
+ # to open it.
exec 9>in &&
+ exec 8<out &&
test_when_finished "exec 9>&-" &&
+ test_when_finished "exec 8<&-" &&
echo >&9 one &&
- read response <out &&
+ read response <&8 &&
echo "$response" | grep "^\.gitignore:1:one one" &&
echo >&9 two &&
- read response <out &&
+ read response <&8 &&
echo "$response" | grep "^:: two"
'
. ./test-lib.sh
norm_path() {
+ expected=$(test-path-utils mingw_path "$2")
test_expect_success $3 "normalize path: $1 => $2" \
- "test \"\$(test-path-utils normalize_path_copy '$1')\" = '$2'"
+ "test \"\$(test-path-utils normalize_path_copy '$1')\" = '$expected'"
+}
+
+relative_path() {
+ expected=$(test-path-utils mingw_path "$3")
+ test_expect_success $4 "relative path: $1 $2 => $3" \
+ "test \"\$(test-path-utils relative_path '$1' '$2')\" = '$expected'"
}
# On Windows, we are using MSYS's bash, which mangles the paths.
test \"\$actual\" = '$expected'"
}
-# Absolute path tests must be skipped on Windows because due to path mangling
-# the test program never sees a POSIX-style absolute path
+# Some absolute path tests should be skipped on Windows due to path mangling
+# on POSIX-style absolute paths
case $(uname -s) in
*MINGW*)
;;
norm_path d1/.../d2 d1/.../d2
norm_path d1/..././../d2 d1/d2
-norm_path / / POSIX
+norm_path / /
norm_path // / POSIX
norm_path /// / POSIX
-norm_path /. / POSIX
+norm_path /. /
norm_path /./ / POSIX
norm_path /./.. ++failed++ POSIX
-norm_path /../. ++failed++ POSIX
+norm_path /../. ++failed++
norm_path /./../.// ++failed++ POSIX
norm_path /dir/.. / POSIX
norm_path /dir/sub/../.. / POSIX
norm_path /dir/sub/../../.. ++failed++ POSIX
-norm_path /dir /dir POSIX
-norm_path /dir// /dir/ POSIX
-norm_path /./dir /dir POSIX
-norm_path /dir/. /dir/ POSIX
-norm_path /dir///./ /dir/ POSIX
-norm_path /dir//sub/.. /dir/ POSIX
-norm_path /dir/sub/../ /dir/ POSIX
+norm_path /dir /dir
+norm_path /dir// /dir/
+norm_path /./dir /dir
+norm_path /dir/. /dir/
+norm_path /dir///./ /dir/
+norm_path /dir//sub/.. /dir/
+norm_path /dir/sub/../ /dir/
norm_path //dir/sub/../. /dir/ POSIX
-norm_path /dir/s1/../s2/ /dir/s2/ POSIX
-norm_path /d1/s1///s2/..//../s3/ /d1/s3/ POSIX
-norm_path /d1/s1//../s2/../../d2 /d2 POSIX
-norm_path /d1/.../d2 /d1/.../d2 POSIX
-norm_path /d1/..././../d2 /d1/d2 POSIX
+norm_path /dir/s1/../s2/ /dir/s2/
+norm_path /d1/s1///s2/..//../s3/ /d1/s3/
+norm_path /d1/s1//../s2/../../d2 /d2
+norm_path /d1/.../d2 /d1/.../d2
+norm_path /d1/..././../d2 /d1/d2
ancestor / / -1
ancestor /foo / 0
test "$sym" = "$(test-path-utils real_path "$dir2/syml")"
'
+relative_path /a/b/c/ /a/b/ c/
+relative_path /a/b/c/ /a/b c/
+relative_path /a//b//c/ //a/b// c/ POSIX
+relative_path /a/b /a/b ./
+relative_path /a/b/ /a/b ./
+relative_path /a /a/b ../
+relative_path / /a/b/ ../../
+relative_path /a/c /a/b/ ../c
+relative_path /a/c /a/b ../c
+relative_path /x/y /a/b/ ../../x/y
+relative_path /a/b "<empty>" /a/b
+relative_path /a/b "<null>" /a/b
+relative_path a/b/c/ a/b/ c/
+relative_path a/b/c/ a/b c/
+relative_path a/b//c a//b c
+relative_path a/b/ a/b/ ./
+relative_path a/b/ a/b ./
+relative_path a a/b ../
+relative_path x/y a/b ../../x/y
+relative_path a/c a/b ../c
+relative_path a/b "<empty>" a/b
+relative_path a/b "<null>" a/b
+relative_path "<empty>" /a/b ./
+relative_path "<empty>" "<empty>" ./
+relative_path "<empty>" "<null>" ./
+relative_path "<null>" "<empty>" ./
+relative_path "<null>" "<null>" ./
+relative_path "<null>" /a/b ./
+
test_done
'
test_expect_success "Type of $type is correct" '
- test $type = "$(git cat-file -t $sha1)"
+ echo $type >expect &&
+ git cat-file -t $sha1 >actual &&
+ test_cmp expect actual
'
test_expect_success "Size of $type is correct" '
- test $size = "$(git cat-file -s $sha1)"
+ echo $size >expect &&
+ git cat-file -s $sha1 >actual &&
+ test_cmp expect actual
'
test -z "$content" ||
test_expect_success "Content of $type is correct" '
- expect="$(maybe_remove_timestamp "$content" $no_ts)"
- actual="$(maybe_remove_timestamp "$(git cat-file $type $sha1)" $no_ts)"
-
- if test "z$expect" = "z$actual"
- then
- : happy
- else
- echo "Oops: expected $expect"
- echo "but got $actual"
- false
- fi
+ maybe_remove_timestamp "$content" $no_ts >expect &&
+ maybe_remove_timestamp "$(git cat-file $type $sha1)" $no_ts >actual &&
+ test_cmp expect actual
'
test_expect_success "Pretty content of $type is correct" '
- expect="$(maybe_remove_timestamp "$pretty_content" $no_ts)"
- actual="$(maybe_remove_timestamp "$(git cat-file -p $sha1)" $no_ts)"
- if test "z$expect" = "z$actual"
- then
- : happy
- else
- echo "Oops: expected $expect"
- echo "but got $actual"
- false
- fi
+ maybe_remove_timestamp "$pretty_content" $no_ts >expect &&
+ maybe_remove_timestamp "$(git cat-file -p $sha1)" $no_ts >actual &&
+ test_cmp expect actual
'
test -z "$content" ||
test_expect_success "--batch output of $type is correct" '
- expect="$(maybe_remove_timestamp "$batch_output" $no_ts)"
- actual="$(maybe_remove_timestamp "$(echo $sha1 | git cat-file --batch)" $no_ts)"
- if test "z$expect" = "z$actual"
- then
- : happy
- else
- echo "Oops: expected $expect"
- echo "but got $actual"
- false
- fi
+ maybe_remove_timestamp "$batch_output" $no_ts >expect &&
+ maybe_remove_timestamp "$(echo $sha1 | git cat-file --batch)" $no_ts >actual &&
+ test_cmp expect actual
'
test_expect_success "--batch-check output of $type is correct" '
- expect="$sha1 $type $size"
- actual="$(echo_without_newline $sha1 | git cat-file --batch-check)"
- if test "z$expect" = "z$actual"
- then
- : happy
- else
- echo "Oops: expected $expect"
- echo "but got $actual"
- false
- fi
+ echo "$sha1 $type $size" >expect &&
+ echo_without_newline $sha1 | git cat-file --batch-check >actual &&
+ test_cmp expect actual
+ '
+
+ test_expect_success "custom --batch-check format" '
+ echo "$type $sha1" >expect &&
+ echo $sha1 | git cat-file --batch-check="%(objecttype) %(objectname)" >actual &&
+ test_cmp expect actual
'
}
--- /dev/null
+#!/bin/sh
+
+test_description='support for reading config from a blob'
+. ./test-lib.sh
+
+test_expect_success 'create config blob' '
+ cat >config <<-\EOF &&
+ [some]
+ value = 1
+ EOF
+ git add config &&
+ git commit -m foo
+'
+
+test_expect_success 'list config blob contents' '
+ echo some.value=1 >expect &&
+ git config --blob=HEAD:config --list >actual &&
+ test_cmp expect actual
+'
+
+test_expect_success 'fetch value from blob' '
+ echo true >expect &&
+ git config --blob=HEAD:config --bool some.value >actual &&
+ test_cmp expect actual
+'
+
+test_expect_success 'reading non-existing value from blob is an error' '
+ test_must_fail git config --blob=HEAD:config non.existing
+'
+
+test_expect_success 'reading from blob and file is an error' '
+ test_must_fail git config --blob=HEAD:config --system --list
+'
+
+test_expect_success 'reading from missing ref is an error' '
+ test_must_fail git config --blob=HEAD:doesnotexist --list
+'
+
+test_expect_success 'reading from non-blob is an error' '
+ test_must_fail git config --blob=HEAD --list
+'
+
+test_expect_success 'setting a value in a blob is an error' '
+ test_must_fail git config --blob=HEAD:config some.value foo
+'
+
+test_expect_success 'deleting a value in a blob is an error' '
+ test_must_fail git config --blob=HEAD:config --unset some.value
+'
+
+test_expect_success 'editing a blob is an error' '
+ test_must_fail git config --blob=HEAD:config --edit
+'
+
+test_expect_success 'parse errors in blobs are properly attributed' '
+ cat >config <<-\EOF &&
+ [some]
+ value = "
+ EOF
+ git add config &&
+ git commit -m broken &&
+
+ test_must_fail git config --blob=HEAD:config some.value 2>err &&
+
+ # just grep for our token as the exact error message is likely to
+ # change or be internationalized
+ grep "HEAD:config" err
+'
+
+test_done
--- /dev/null
+#!/bin/sh
+
+test_description='show-ref'
+. ./test-lib.sh
+
+test_expect_success setup '
+ test_commit A &&
+ git tag -f -a -m "annotated A" A &&
+ git checkout -b side &&
+ test_commit B &&
+ git tag -f -a -m "annotated B" B &&
+ git checkout master &&
+ test_commit C &&
+ git branch B A^0
+'
+
+test_expect_success 'show-ref' '
+ echo $(git rev-parse refs/tags/A) refs/tags/A >expect &&
+
+ git show-ref A >actual &&
+ test_cmp expect actual &&
+
+ git show-ref tags/A >actual &&
+ test_cmp expect actual &&
+
+ git show-ref refs/tags/A >actual &&
+ test_cmp expect actual &&
+
+ >expect &&
+
+ test_must_fail git show-ref D >actual
+ test_cmp expect actual
+'
+
+test_expect_success 'show-ref -q' '
+ >expect &&
+
+ git show-ref -q A >actual &&
+ test_cmp expect actual &&
+
+ git show-ref -q tags/A >actual &&
+ test_cmp expect actual &&
+
+ git show-ref -q refs/tags/A >actual &&
+ test_cmp expect actual &&
+
+ test_must_fail git show-ref -q D >actual &&
+ test_cmp expect actual
+'
+
+test_expect_success 'show-ref --verify' '
+ echo $(git rev-parse refs/tags/A) refs/tags/A >expect &&
+
+ git show-ref --verify refs/tags/A >actual &&
+ test_cmp expect actual &&
+
+ >expect &&
+
+ test_must_fail git show-ref --verify A >actual &&
+ test_cmp expect actual &&
+
+ test_must_fail git show-ref --verify tags/A >actual &&
+ test_cmp expect actual &&
+
+ test_must_fail git show-ref --verify D >actual
+ test_cmp expect actual
+'
+
+test_expect_success 'show-ref --verify -q' '
+ >expect &&
+
+ git show-ref --verify -q refs/tags/A >actual &&
+ test_cmp expect actual &&
+
+ test_must_fail git show-ref --verify -q A >actual &&
+ test_cmp expect actual &&
+
+ test_must_fail git show-ref --verify -q tags/A >actual &&
+ test_cmp expect actual &&
+
+ test_must_fail git show-ref --verify -q D >actual
+ test_cmp expect actual
+'
+
+test_expect_success 'show-ref -d' '
+ {
+ echo $(git rev-parse refs/tags/A) refs/tags/A &&
+ echo $(git rev-parse refs/tags/A^0) "refs/tags/A^{}"
+ echo $(git rev-parse refs/tags/C) refs/tags/C
+ } >expect &&
+ git show-ref -d A C >actual &&
+ test_cmp expect actual &&
+
+ git show-ref -d tags/A tags/C >actual &&
+ test_cmp expect actual &&
+
+ git show-ref -d refs/tags/A refs/tags/C >actual &&
+ test_cmp expect actual &&
+
+ echo $(git rev-parse refs/heads/master) refs/heads/master >expect &&
+ git show-ref -d master >actual &&
+ test_cmp expect actual &&
+
+ git show-ref -d heads/master >actual &&
+ test_cmp expect actual &&
+
+ git show-ref -d refs/heads/master >actual &&
+ test_cmp expect actual
+
+ git show-ref -d --verify refs/heads/master >actual &&
+ test_cmp expect actual
+
+ >expect &&
+
+ test_must_fail git show-ref -d --verify master >actual &&
+ test_cmp expect actual &&
+
+ test_must_fail git show-ref -d --verify heads/master >actual &&
+ test_cmp expect actual
+
+'
+
+test_expect_success 'show-ref --heads, --tags, --head, pattern' '
+ for branch in B master side
+ do
+ echo $(git rev-parse refs/heads/$branch) refs/heads/$branch
+ done >expect.heads &&
+ git show-ref --heads >actual &&
+ test_cmp expect.heads actual &&
+
+ for tag in A B C
+ do
+ echo $(git rev-parse refs/tags/$tag) refs/tags/$tag
+ done >expect.tags &&
+ git show-ref --tags >actual &&
+ test_cmp expect.tags actual &&
+
+ cat expect.heads expect.tags >expect &&
+ git show-ref --heads --tags >actual &&
+ test_cmp expect actual &&
+
+ {
+ echo $(git rev-parse HEAD) HEAD &&
+ cat expect.heads expect.tags
+ } >expect &&
+ git show-ref --heads --tags --head >actual &&
+ test_cmp expect actual &&
+
+ {
+ echo $(git rev-parse HEAD) HEAD &&
+ echo $(git rev-parse refs/heads/B) refs/heads/B
+ echo $(git rev-parse refs/tags/B) refs/tags/B
+ } >expect &&
+ git show-ref --head B >actual &&
+ test_cmp expect actual &&
+
+ {
+ echo $(git rev-parse HEAD) HEAD &&
+ echo $(git rev-parse refs/heads/B) refs/heads/B
+ echo $(git rev-parse refs/tags/B) refs/tags/B
+ echo $(git rev-parse refs/tags/B^0) "refs/tags/B^{}"
+ } >expect &&
+ git show-ref --head -d B >actual &&
+ test_cmp expect actual
+'
+
+test_done
test_cmp expect actual
'
+test_expect_success 'Just "git add" is a no-op' '
+ git reset --hard &&
+ echo >will-remove &&
+ >will-not-be-added &&
+ git add &&
+ git diff-index --name-status --cached HEAD >actual &&
+ >expect &&
+ test_cmp expect actual
+'
+
test_done
. ./test-lib.sh
test_have_prereq SED_STRIPS_CR && SED_OPTIONS=-b
-test_have_prereq MINGW && export GREP_OPTIONS=-U
+test_have_prereq GREP_STRIPS_CR && export GREP_OPTIONS=-U
test_expect_success 'setup' '
conflict_hunks () {
test L = $(git cat-file commit HEAD | sed -ne \$p)
'
+test_expect_success 'rebase -i produces readable reflog' '
+ git reset --hard &&
+ git branch -f branch-reflog-test H &&
+ git rebase -i --onto I F branch-reflog-test &&
+ cat >expect <<-\EOF &&
+ rebase -i (start): checkout I
+ rebase -i (pick): G
+ rebase -i (pick): H
+ rebase -i (finish): returning to refs/heads/branch-reflog-test
+ EOF
+ tail -n 4 .git/logs/HEAD |
+ sed -e "s/.* //" >actual &&
+ test_cmp expect actual
+'
+
test_expect_success 'rebase -i respects core.commentchar' '
git reset --hard &&
git checkout E^0 &&
test z = "z$E"
'
-test_expect_failure 'UTF-16 refused because of NULs' '
+test_expect_success 'UTF-16 refused because of NULs' '
echo UTF-16 >F &&
- git commit -a -F "$TEST_DIRECTORY"/t3900/UTF-16.txt
+ test_must_fail git commit -a -F "$TEST_DIRECTORY"/t3900/UTF-16.txt
'
+test_expect_success 'UTF-8 invalid characters refused' '
+ test_when_finished "rm -f $HOME/stderr $HOME/invalid" &&
+ echo "UTF-8 characters" >F &&
+ printf "Commit message\n\nInvalid surrogate:\355\240\200\n" \
+ >"$HOME/invalid" &&
+ git commit -a -F "$HOME/invalid" 2>"$HOME"/stderr &&
+ grep "did not conform" "$HOME"/stderr
+'
+
+test_expect_success 'UTF-8 overlong sequences rejected' '
+ test_when_finished "rm -f $HOME/stderr $HOME/invalid" &&
+ rm -f "$HOME/stderr" "$HOME/invalid" &&
+ echo "UTF-8 overlong" >F &&
+ printf "\340\202\251ommit message\n\nThis is not a space:\300\240\n" \
+ >"$HOME/invalid" &&
+ git commit -a -F "$HOME/invalid" 2>"$HOME"/stderr &&
+ grep "did not conform" "$HOME"/stderr
+'
+
+test_expect_success 'UTF-8 non-characters refused' '
+ test_when_finished "rm -f $HOME/stderr $HOME/invalid" &&
+ echo "UTF-8 non-character 1" >F &&
+ printf "Commit message\n\nNon-character:\364\217\277\276\n" \
+ >"$HOME/invalid" &&
+ git commit -a -F "$HOME/invalid" 2>"$HOME"/stderr &&
+ grep "did not conform" "$HOME"/stderr
+'
+
+test_expect_success 'UTF-8 non-characters refused' '
+ test_when_finished "rm -f $HOME/stderr $HOME/invalid" &&
+ echo "UTF-8 non-character 2." >F &&
+ printf "Commit message\n\nNon-character:\357\267\220\n" \
+ >"$HOME/invalid" &&
+ git commit -a -F "$HOME/invalid" 2>"$HOME"/stderr &&
+ grep "did not conform" "$HOME"/stderr
+'
for H in ISO8859-1 eucJP ISO-2022-JP
do
cat path0 >path1
chmod +x path1
-test_expect_success \
- 'update-index --add two files with and without +x.' \
- 'git update-index --add path0 path1'
+test_expect_success 'update-index --add two files with and without +x.' '
+ git update-index --add path0 path1
+'
mv path0 path0-
sed -e 's/line/Line/' <path0- >path0
chmod +x path0
rm -f path1
-test_expect_success \
- 'git diff-files -p after editing work tree.' \
- 'git diff-files -p >current'
+test_expect_success 'git diff-files -p after editing work tree.' '
+ git diff-files -p >actual
+'
# that's as far as it comes
if [ "$(git config --get core.filemode)" = false ]
-line 3
EOF
-test_expect_success \
- 'validate git diff-files -p output.' \
- 'compare_diff_patch current expected'
+test_expect_success 'validate git diff-files -p output.' '
+ compare_diff_patch expected actual
+'
+
+test_expect_success 'git diff-files -s after editing work tree' '
+ git diff-files -s >actual 2>err &&
+ test_must_be_empty actual &&
+ test_must_be_empty err
+'
+
+test_expect_success 'git diff-files --no-patch as synonym for -s' '
+ git diff-files --no-patch >actual 2>err &&
+ test_must_be_empty actual &&
+ test_must_be_empty err
+'
+
+test_expect_success 'git diff-files --no-patch --patch shows the patch' '
+ git diff-files --no-patch --patch >actual &&
+ compare_diff_patch expected actual
+'
+
+test_expect_success 'git diff-files --no-patch --patch-with-raw shows the patch and raw data' '
+ git diff-files --no-patch --patch-with-raw >actual &&
+ grep -q "^:100644 100755 .* 0000000000000000000000000000000000000000 M path0\$" actual &&
+ tail -n +4 actual >actual-patch &&
+ compare_diff_patch expected actual-patch
+'
+
+test_expect_success 'git diff-files --patch --no-patch does not show the patch' '
+ git diff-files --patch --no-patch >actual 2>err &&
+ test_must_be_empty actual &&
+ test_must_be_empty err
+'
test_done
test_cmp expect actual
'
+test_expect_success '--from=ident notices bogus ident' '
+ test_must_fail git format-patch -1 --stdout --from=foo >patch
+'
+
+test_expect_success '--from=ident replaces author' '
+ git format-patch -1 --stdout --from="Me <me@example.com>" >patch &&
+ cat >expect <<-\EOF &&
+ From: Me <me@example.com>
+
+ From: A U Thor <author@example.com>
+
+ EOF
+ sed -ne "/^From:/p; /^$/p; /^---$/q" <patch >patch.head &&
+ test_cmp expect patch.head
+'
+
+test_expect_success '--from uses committer ident' '
+ git format-patch -1 --stdout --from >patch &&
+ cat >expect <<-\EOF &&
+ From: C O Mitter <committer@example.com>
+
+ From: A U Thor <author@example.com>
+
+ EOF
+ sed -ne "/^From:/p; /^$/p; /^---$/q" <patch >patch.head &&
+ test_cmp expect patch.head
+'
+
+test_expect_success 'in-body headers trigger content encoding' '
+ GIT_AUTHOR_NAME="éxötìc" test_commit exotic &&
+ test_when_finished "git reset --hard HEAD^" &&
+ git format-patch -1 --stdout --from >patch &&
+ cat >expect <<-\EOF &&
+ From: C O Mitter <committer@example.com>
+ Content-Type: text/plain; charset=UTF-8
+
+ From: éxötìc <author@example.com>
+
+ EOF
+ sed -ne "/^From:/p; /^$/p; /^Content-Type/p; /^---$/q" <patch >patch.head &&
+ test_cmp expect patch.head
+'
+
append_signoff()
{
C=$(git commit-tree HEAD^^{tree} -p HEAD) &&
#!/bin/sh
#
# Copyright (c) 2009 Jens Lehmann, based on t7401 by Ping Yin
+# Copyright (c) 2011 Alexey Shumkin (+ non-UTF-8 commit encoding tests)
#
test_description='Support for verbose submodule differences in git diff
. ./test-lib.sh
+# String "added" in German (translated with Google Translate), encoded in UTF-8,
+# used in sample commit log messages in add_file() function below.
+added=$(printf "hinzugef\303\274gt")
add_file () {
(
cd "$1" &&
echo "$name" >"$name" &&
git add "$name" &&
test_tick &&
- git commit -m "Add $name" || exit
+ msg_added_iso88591=$(echo "Add $name ($added $name)" | iconv -f utf-8 -t iso8859-1) &&
+ git -c 'i18n.commitEncoding=iso8859-1' commit -m "$msg_added_iso88591"
done >/dev/null &&
git rev-parse --short --verify HEAD
)
git diff-index -p --submodule=log HEAD >actual &&
cat >expected <<-EOF &&
Submodule sm1 $head1..$head2:
- > Add foo3
+ > Add foo3 ($added foo3)
EOF
test_cmp expected actual
'
git diff --submodule=log >actual &&
cat >expected <<-EOF &&
Submodule sm1 $head1..$head2:
- > Add foo3
+ > Add foo3 ($added foo3)
EOF
test_cmp expected actual
'
git diff --submodule >actual &&
cat >expected <<-EOF &&
Submodule sm1 $head1..$head2:
- > Add foo3
+ > Add foo3 ($added foo3)
EOF
test_cmp expected actual
'
git diff-index -p --submodule=log HEAD >actual &&
cat >expected <<-EOF &&
Submodule sm1 $head2..$head3 (rewind):
- < Add foo3
- < Add foo2
+ < Add foo3 ($added foo3)
+ < Add foo2 ($added foo2)
EOF
test_cmp expected actual
'
git diff-index -p --submodule=log HEAD >actual &&
cat >expected <<-EOF &&
Submodule sm1 $head2...$head4:
- > Add foo5
- > Add foo4
- < Add foo3
- < Add foo2
+ > Add foo5 ($added foo5)
+ > Add foo4 ($added foo4)
+ < Add foo3 ($added foo3)
+ < Add foo2 ($added foo2)
EOF
test_cmp expected actual
'
}
test_expect_success setup '
+ cat >contacts <<-\EOF &&
+ A U Thor <author@example.com>
+ nick1 <bugs@company.xx>
+ EOF
+
echo one >one &&
git add one &&
test_tick &&
git commit --author "nick1 <bugs@company.xx>" -m second
'
+test_expect_success 'check-mailmap no arguments' '
+ test_must_fail git check-mailmap
+'
+
+test_expect_success 'check-mailmap arguments' '
+ cat >expect <<-\EOF &&
+ A U Thor <author@example.com>
+ nick1 <bugs@company.xx>
+ EOF
+ git check-mailmap \
+ "A U Thor <author@example.com>" \
+ "nick1 <bugs@company.xx>" >actual &&
+ test_cmp expect actual
+'
+
+test_expect_success 'check-mailmap --stdin' '
+ cat >expect <<-\EOF &&
+ A U Thor <author@example.com>
+ nick1 <bugs@company.xx>
+ EOF
+ git check-mailmap --stdin <contacts >actual &&
+ test_cmp expect actual
+'
+
+test_expect_success 'check-mailmap --stdin arguments' '
+ cat >expect <<-\EOF &&
+ Internal Guy <bugs@company.xy>
+ EOF
+ cat <contacts >>expect &&
+ git check-mailmap --stdin "Internal Guy <bugs@company.xy>" \
+ <contacts >actual &&
+ test_cmp expect actual
+'
+
+test_expect_success 'check-mailmap bogus contact' '
+ test_must_fail git check-mailmap bogus
+'
+
cat >expect <<\EOF
A U Thor (1):
initial
rm -f .mailmap
'
+test_expect_success 'single-character name' '
+ echo " 1 A <author@example.com>" >expect &&
+ echo " 1 nick1 <bugs@company.xx>" >>expect &&
+ echo "A <author@example.com>" >.mailmap &&
+ test_when_finished "rm .mailmap" &&
+ git shortlog -es HEAD >actual &&
+ test_cmp expect actual
+'
+
+test_expect_success 'preserve canonical email case' '
+ echo " 1 A U Thor <AUTHOR@example.com>" >expect &&
+ echo " 1 nick1 <bugs@company.xx>" >>expect &&
+ echo "<AUTHOR@example.com> <author@example.com>" >.mailmap &&
+ test_when_finished "rm .mailmap" &&
+ git shortlog -es HEAD >actual &&
+ test_cmp expect actual
+'
+
# Extended mailmap configurations should give us the following output for shortlog
cat >expect <<\EOF
A U Thor <author@example.com> (1):
#!/bin/sh
#
# Copyright (c) 2010, Will Palmer
+# Copyright (c) 2011, Alexey Shumkin (+ non-UTF-8 commit encoding tests)
#
test_description='Test pretty formats'
. ./test-lib.sh
+sample_utf8_part=$(printf "f\303\244ng")
+
+commit_msg () {
+ # String "initial. initial" partly in German
+ # (translated with Google Translate),
+ # encoded in UTF-8, used as a commit log message below.
+ msg="initial. an${sample_utf8_part}lich\n"
+ if test -n "$1"
+ then
+ printf "$msg" | iconv -f utf-8 -t "$1"
+ else
+ printf "$msg"
+ fi
+}
+
test_expect_success 'set up basic repos' '
>foo &&
>bar &&
git add foo &&
test_tick &&
- git commit -m initial &&
+ git config i18n.commitEncoding iso8859-1 &&
+ git commit -m "$(commit_msg iso8859-1)" &&
git add bar &&
test_tick &&
- git commit -m "add bar"
+ git commit -m "add bar" &&
+ git config --unset i18n.commitEncoding
'
test_expect_success 'alias builtin format' '
test_cmp expected actual
'
+test_expect_success 'alias user-defined tformat with %s (iso8859-1 encoding)' '
+ git config i18n.logOutputEncoding iso8859-1 &&
+ git log --oneline >expected-s &&
+ git log --pretty="tformat:%h %s" >actual-s &&
+ git config --unset i18n.logOutputEncoding &&
+ test_cmp expected-s actual-s
+'
+
+test_expect_success 'alias user-defined tformat with %s (utf-8 encoding)' '
+ git log --oneline >expected-s &&
+ git log --pretty="tformat:%h %s" >actual-s &&
+ test_cmp expected-s actual-s
+'
+
test_expect_success 'alias user-defined tformat' '
git log --pretty="tformat:%h" >expected &&
git config pretty.test-alias "tformat:%h" &&
'
test_expect_success 'NUL separation' '
- printf "add bar\0initial" >expected &&
+ printf "add bar\0$(commit_msg)" >expected &&
git log -z --pretty="format:%s" >actual &&
test_cmp expected actual
'
test_expect_success 'NUL termination' '
- printf "add bar\0initial\0" >expected &&
+ printf "add bar\0$(commit_msg)\0" >expected &&
git log -z --pretty="tformat:%s" >actual &&
test_cmp expected actual
'
test_expect_success 'NUL separation with --stat' '
stat0_part=$(git diff --stat HEAD^ HEAD) &&
stat1_part=$(git diff-tree --no-commit-id --stat --root HEAD^) &&
- printf "add bar\n$stat0_part\n\0initial\n$stat1_part\n" >expected &&
+ printf "add bar\n$stat0_part\n\0$(commit_msg)\n$stat1_part\n" >expected &&
git log -z --stat --pretty="format:%s" >actual &&
test_i18ncmp expected actual
'
test_expect_failure 'NUL termination with --stat' '
stat0_part=$(git diff --stat HEAD^ HEAD) &&
stat1_part=$(git diff-tree --no-commit-id --stat --root HEAD^) &&
- printf "add bar\n$stat0_part\n\0initial\n$stat1_part\n\0" >expected &&
+ printf "add bar\n$stat0_part\n\0$(commit_msg)\n$stat1_part\n0" >expected &&
git log -z --stat --pretty="tformat:%s" >actual &&
test_i18ncmp expected actual
'
test_expect_success 'setup more commits' '
test_commit "message one" one one message-one &&
- test_commit "message two" two two message-two
+ test_commit "message two" two two message-two &&
+ head1=$(git rev-parse --verify --short HEAD~0) &&
+ head2=$(git rev-parse --verify --short HEAD~1) &&
+ head3=$(git rev-parse --verify --short HEAD~2) &&
+ head4=$(git rev-parse --verify --short HEAD~3)
'
test_expect_success 'left alignment formatting' '
git log --pretty="format:%<(40)%s" >actual &&
# complete the incomplete line at the end
echo >>actual &&
- qz_to_tab_space <<\EOF >expected &&
+ qz_to_tab_space <<EOF >expected &&
message two Z
message one Z
add bar Z
-initial Z
+$(commit_msg) Z
EOF
test_cmp expected actual
'
git log --pretty="format:%h %<|(40)%s" >actual &&
# complete the incomplete line at the end
echo >>actual &&
- qz_to_tab_space <<\EOF >expected &&
-fa33ab1 message two Z
-7cd6c63 message one Z
-1711bf9 add bar Z
-af20c06 initial Z
+ qz_to_tab_space <<EOF >expected &&
+$head1 message two Z
+$head2 message one Z
+$head3 add bar Z
+$head4 $(commit_msg) Z
EOF
test_cmp expected actual
'
git log --pretty="format:%<(1)%s" >actual &&
# complete the incomplete line at the end
echo >>actual &&
- cat <<\EOF >expected &&
+ cat <<EOF >expected &&
message two
message one
add bar
-initial
+$(commit_msg)
EOF
test_cmp expected actual
'
git log --pretty="format:%<(10,trunc)%s" >actual &&
# complete the incomplete line at the end
echo >>actual &&
- qz_to_tab_space <<\EOF >expected &&
+ qz_to_tab_space <<EOF >expected &&
message ..
message ..
add bar Z
-initial Z
+initial...
EOF
test_cmp expected actual
'
git log --pretty="format:%<(10,ltrunc)%s" >actual &&
# complete the incomplete line at the end
echo >>actual &&
- qz_to_tab_space <<\EOF >expected &&
+ qz_to_tab_space <<EOF >expected &&
..sage two
..sage one
add bar Z
-initial Z
+..${sample_utf8_part}lich
EOF
test_cmp expected actual
'
git log --pretty="format:%<(10,mtrunc)%s" >actual &&
# complete the incomplete line at the end
echo >>actual &&
- qz_to_tab_space <<\EOF >expected &&
+ qz_to_tab_space <<EOF >expected &&
mess.. two
mess.. one
add bar Z
-initial Z
+init..lich
EOF
test_cmp expected actual
'
git log --pretty="format:%>(40)%s" >actual &&
# complete the incomplete line at the end
echo >>actual &&
- qz_to_tab_space <<\EOF >expected &&
+ qz_to_tab_space <<EOF >expected &&
Z message two
Z message one
Z add bar
-Z initial
+Z $(commit_msg)
EOF
test_cmp expected actual
'
git log --pretty="format:%h %>|(40)%s" >actual &&
# complete the incomplete line at the end
echo >>actual &&
- qz_to_tab_space <<\EOF >expected &&
-fa33ab1 message two
-7cd6c63 message one
-1711bf9 add bar
-af20c06 initial
+ qz_to_tab_space <<EOF >expected &&
+$head1 message two
+$head2 message one
+$head3 add bar
+$head4 $(commit_msg)
EOF
test_cmp expected actual
'
git log --pretty="format:%>(1)%s" >actual &&
# complete the incomplete line at the end
echo >>actual &&
- cat <<\EOF >expected &&
+ cat <<EOF >expected &&
message two
message one
add bar
-initial
+$(commit_msg)
EOF
test_cmp expected actual
'
git log --pretty="format:%><(40)%s" >actual &&
# complete the incomplete line at the end
echo >>actual &&
- qz_to_tab_space <<\EOF >expected &&
+ qz_to_tab_space <<EOF >expected &&
Z message two Z
Z message one Z
Z add bar Z
-Z initial Z
+Z $(commit_msg) Z
EOF
test_cmp expected actual
'
git log --pretty="format:%h %><|(40)%s" >actual &&
# complete the incomplete line at the end
echo >>actual &&
- qz_to_tab_space <<\EOF >expected &&
-fa33ab1 message two Z
-7cd6c63 message one Z
-1711bf9 add bar Z
-af20c06 initial Z
+ qz_to_tab_space <<EOF >expected &&
+$head1 message two Z
+$head2 message one Z
+$head3 add bar Z
+$head4 $(commit_msg) Z
EOF
test_cmp expected actual
'
git log --pretty="format:%><(1)%s" >actual &&
# complete the incomplete line at the end
echo >>actual &&
- cat <<\EOF >expected &&
+ cat <<EOF >expected &&
message two
message one
add bar
-initial
+$(commit_msg)
EOF
test_cmp expected actual
'
git log --pretty="format:%<(10,trunc)%s%>>(10,ltrunc)% an" >actual &&
# complete the incomplete line at the end
echo >>actual &&
- cat <<\EOF >expected &&
+ cat <<EOF >expected &&
short long long long
message .. A U Thor
add bar A U Thor
-initial A U Thor
+initial... A U Thor
EOF
test_cmp expected actual
'
test_bad_opts "-L :b.c" "argument.*not of the form"
test_bad_opts "-L :foo:b.c" "no match"
+# There is a separate bug when an empty -L range is the first -L encountered,
+# thus to demonstrate this particular bug, the empty -L range must follow a
+# non-empty -L range.
+test_expect_success '-L {empty-range} (any -L)' '
+ n=$(expr $(wc -l <b.c) + 1) &&
+ git log -L1,1:b.c -L$n:b.c
+'
+
+test_expect_success '-L {empty-range} (first -L)' '
+ n=$(expr $(wc -l <b.c) + 1) &&
+ git log -L$n:b.c
+'
+
test_done
+commit 4659538844daa2849b1a9e7d6fadb96fcd26fc83
+Author: Thomas Rast <trast@student.ethz.ch>
+Date: Thu Feb 28 10:48:43 2013 +0100
+
+ change back to complete line
+
+diff --git a/a.c b/a.c
+--- a/a.c
++++ b/a.c
+@@ -4,19 +4,21 @@
+ long f(long x)
+ {
+ int s = 0;
+ while (x) {
+ x >>= 1;
+ s++;
+ }
+ return s;
+ }
+
+ /*
+ * This is only an example!
+ */
+
+ int main ()
+ {
+ printf("%ld\n", f(15));
+ return 0;
+-}
+\ No newline at end of file
++}
++
++/* incomplete lines are bad! */
+
+commit 100b61a6f2f720f812620a9d10afb3a960ccb73c
+Author: Thomas Rast <trast@student.ethz.ch>
+Date: Thu Feb 28 10:48:10 2013 +0100
+
+ change to an incomplete line at end
+
+diff --git a/a.c b/a.c
+--- a/a.c
++++ b/a.c
+@@ -4,19 +4,19 @@
+ long f(long x)
+ {
+ int s = 0;
+ while (x) {
+ x >>= 1;
+ s++;
+ }
+ return s;
+ }
+
+ /*
+ * This is only an example!
+ */
+
+ int main ()
+ {
+ printf("%ld\n", f(15));
+ return 0;
+-}
++}
+\ No newline at end of file
+
+commit 39b6eb2d5b706d3322184a169f666f25ed3fbd00
+Author: Thomas Rast <trast@student.ethz.ch>
+Date: Thu Feb 28 10:45:41 2013 +0100
+
+ touch comment
+
+diff --git a/a.c b/a.c
+--- a/a.c
++++ b/a.c
+@@ -3,19 +3,19 @@
+ long f(long x)
+ {
+ int s = 0;
+ while (x) {
+ x >>= 1;
+ s++;
+ }
+ return s;
+ }
+
+ /*
+- * A comment.
++ * This is only an example!
+ */
+
+ int main ()
+ {
+ printf("%ld\n", f(15));
+ return 0;
+ }
+
commit a6eb82647d5d67f893da442f8f9375fd89a3b1e2
Author: Thomas Rast <trast@student.ethz.ch>
Date: Thu Feb 28 10:45:16 2013 +0100
diff --git a/a.c b/a.c
--- a/a.c
+++ b/a.c
-@@ -3,9 +3,9 @@
+@@ -3,19 +3,19 @@
-int f(int x)
+long f(long x)
{
}
return s;
}
+
+ /*
+ * A comment.
+ */
+
+ int main ()
+ {
+- printf("%d\n", f(15));
++ printf("%ld\n", f(15));
+ return 0;
+ }
commit f04fb20f2c77850996cba739709acc6faecc58f7
Author: Thomas Rast <trast@student.ethz.ch>
diff --git a/a.c b/a.c
--- a/a.c
+++ b/a.c
-@@ -3,8 +3,9 @@
+@@ -3,18 +3,19 @@
int f(int x)
{
int s = 0;
}
+ return s;
}
+
+ /*
+ * A comment.
+ */
+
+ int main ()
+ {
+ printf("%d\n", f(15));
+ return 0;
+ }
commit de4c48ae814792c02a49c4c3c0c757ae69c55f6a
Author: Thomas Rast <trast@student.ethz.ch>
diff --git a/a.c b/a.c
--- /dev/null
+++ b/a.c
-@@ -0,0 +3,8 @@
+@@ -0,0 +3,18 @@
+int f(int x)
+{
+ int s = 0;
+ s++;
+ }
+}
++
++/*
++ * A comment.
++ */
++
++int main ()
++{
++ printf("%d\n", f(15));
++ return 0;
++}
)
'
-test_expect_success C_LOCALE_OUTPUT 'check remote tracking' '
+test_expect_success C_LOCALE_OUTPUT 'check remote-tracking' '
(
cd test &&
check_remote_track origin master side &&
HTTPD_DOCUMENT_ROOT_PATH="$TRASH_DIRECTORY"
-test_have_prereq MINGW && export GREP_OPTIONS=-U
+test_have_prereq GREP_STRIPS_CR && export GREP_OPTIONS=-U
run_backend() {
echo "$2" |
git clone -l -s D E &&
git clone -l -s E F &&
git clone -l -s F G &&
-test_must_fail git clone --bare -l -s G H'
+git clone --bare -l -s G H'
+
+test_expect_success 'invalidity of deepest repository' \
+'cd H && {
+ test_valid_repo
+ test $? -ne 0
+}'
cd "$base_dir"
#!/bin/sh
+# Copyright (c) 2009 Jens Lehmann
+# Copyright (c) 2011 Alexey Shumkin (+ non-UTF-8 commit encoding tests)
+
test_description='git rev-list --pretty=format test'
. ./test-lib.sh
. "$TEST_DIRECTORY"/lib-terminal.sh
test_tick
+# String "added" in German
+# (translated with Google Translate),
+# encoded in UTF-8, used as a commit log message below.
+added=$(printf "added (hinzugef\303\274gt) foo")
+added_iso88591=$(echo "$added" | iconv -f utf-8 -t iso8859-1)
+# same but "changed"
+changed=$(printf "changed (ge\303\244ndert) foo")
+changed_iso88591=$(echo "$changed" | iconv -f utf-8 -t iso8859-1)
+
test_expect_success 'setup' '
-touch foo && git add foo && git commit -m "added foo" &&
- echo changed >foo && git commit -a -m "changed foo"
+ : >foo &&
+ git add foo &&
+ git config i18n.commitEncoding iso8859-1 &&
+ git commit -m "$added_iso88591" &&
+ head1=$(git rev-parse --verify HEAD) &&
+ head1_short=$(git rev-parse --verify --short $head1) &&
+ tree1=$(git rev-parse --verify HEAD:) &&
+ tree1_short=$(git rev-parse --verify --short $tree1) &&
+ echo "$changed" > foo &&
+ git commit -a -m "$changed_iso88591" &&
+ head2=$(git rev-parse --verify HEAD) &&
+ head2_short=$(git rev-parse --verify --short $head2) &&
+ tree2=$(git rev-parse --verify HEAD:) &&
+ tree2_short=$(git rev-parse --verify --short $tree2)
+ git config --unset i18n.commitEncoding
'
-# usage: test_format name format_string <expected_output
+# usage: test_format name format_string [failure] <expected_output
test_format () {
cat >expect.$1
- test_expect_success "format $1" "
+ test_expect_${3:-success} "format $1" "
git rev-list --pretty=format:'$2' master >output.$1 &&
test_cmp expect.$1 output.$1
"
test_cmp expect "$1"
}
-test_format percent %%h <<'EOF'
-commit 131a310eb913d107dd3c09a65d1651175898735d
+test_format percent %%h <<EOF
+commit $head2
%h
-commit 86c75cfd708a0e5868dc876ed5b8bb66c80b4873
+commit $head1
%h
EOF
-test_format hash %H%n%h <<'EOF'
-commit 131a310eb913d107dd3c09a65d1651175898735d
-131a310eb913d107dd3c09a65d1651175898735d
-131a310
-commit 86c75cfd708a0e5868dc876ed5b8bb66c80b4873
-86c75cfd708a0e5868dc876ed5b8bb66c80b4873
-86c75cf
+test_format hash %H%n%h <<EOF
+commit $head2
+$head2
+$head2_short
+commit $head1
+$head1
+$head1_short
EOF
-test_format tree %T%n%t <<'EOF'
-commit 131a310eb913d107dd3c09a65d1651175898735d
-fe722612f26da5064c32ca3843aa154bdb0b08a0
-fe72261
-commit 86c75cfd708a0e5868dc876ed5b8bb66c80b4873
-4d5fcadc293a348e88f777dc0920f11e7d71441c
-4d5fcad
+test_format tree %T%n%t <<EOF
+commit $head2
+$tree2
+$tree2_short
+commit $head1
+$tree1
+$tree1_short
EOF
-test_format parents %P%n%p <<'EOF'
-commit 131a310eb913d107dd3c09a65d1651175898735d
-86c75cfd708a0e5868dc876ed5b8bb66c80b4873
-86c75cf
-commit 86c75cfd708a0e5868dc876ed5b8bb66c80b4873
+test_format parents %P%n%p <<EOF
+commit $head2
+$head1
+$head1_short
+commit $head1
EOF
# we don't test relative here
-test_format author %an%n%ae%n%ad%n%aD%n%at <<'EOF'
-commit 131a310eb913d107dd3c09a65d1651175898735d
+test_format author %an%n%ae%n%ad%n%aD%n%at <<EOF
+commit $head2
A U Thor
author@example.com
Thu Apr 7 15:13:13 2005 -0700
Thu, 7 Apr 2005 15:13:13 -0700
1112911993
-commit 86c75cfd708a0e5868dc876ed5b8bb66c80b4873
+commit $head1
A U Thor
author@example.com
Thu Apr 7 15:13:13 2005 -0700
1112911993
EOF
-test_format committer %cn%n%ce%n%cd%n%cD%n%ct <<'EOF'
-commit 131a310eb913d107dd3c09a65d1651175898735d
+test_format committer %cn%n%ce%n%cd%n%cD%n%ct <<EOF
+commit $head2
C O Mitter
committer@example.com
Thu Apr 7 15:13:13 2005 -0700
Thu, 7 Apr 2005 15:13:13 -0700
1112911993
-commit 86c75cfd708a0e5868dc876ed5b8bb66c80b4873
+commit $head1
C O Mitter
committer@example.com
Thu Apr 7 15:13:13 2005 -0700
1112911993
EOF
-test_format encoding %e <<'EOF'
-commit 131a310eb913d107dd3c09a65d1651175898735d
-commit 86c75cfd708a0e5868dc876ed5b8bb66c80b4873
+test_format encoding %e <<EOF
+commit $head2
+iso8859-1
+commit $head1
+iso8859-1
EOF
-test_format subject %s <<'EOF'
-commit 131a310eb913d107dd3c09a65d1651175898735d
-changed foo
-commit 86c75cfd708a0e5868dc876ed5b8bb66c80b4873
-added foo
+test_format subject %s <<EOF
+commit $head2
+$changed
+commit $head1
+$added
EOF
-test_format body %b <<'EOF'
-commit 131a310eb913d107dd3c09a65d1651175898735d
-commit 86c75cfd708a0e5868dc876ed5b8bb66c80b4873
+test_format body %b <<EOF
+commit $head2
+commit $head1
EOF
-test_format raw-body %B <<'EOF'
-commit 131a310eb913d107dd3c09a65d1651175898735d
-changed foo
+test_format raw-body %B <<EOF
+commit $head2
+$changed
-commit 86c75cfd708a0e5868dc876ed5b8bb66c80b4873
-added foo
+commit $head1
+$added
EOF
-test_format colors %Credfoo%Cgreenbar%Cbluebaz%Cresetxyzzy <<'EOF'
-commit 131a310eb913d107dd3c09a65d1651175898735d
+test_format colors %Credfoo%Cgreenbar%Cbluebaz%Cresetxyzzy <<EOF
+commit $head2
\e[31mfoo\e[32mbar\e[34mbaz\e[mxyzzy
-commit 86c75cfd708a0e5868dc876ed5b8bb66c80b4873
+commit $head1
\e[31mfoo\e[32mbar\e[34mbaz\e[mxyzzy
EOF
-test_format advanced-colors '%C(red yellow bold)foo%C(reset)' <<'EOF'
-commit 131a310eb913d107dd3c09a65d1651175898735d
+test_format advanced-colors '%C(red yellow bold)foo%C(reset)' <<EOF
+commit $head2
\e[1;31;43mfoo\e[m
-commit 86c75cfd708a0e5868dc876ed5b8bb66c80b4873
+commit $head1
\e[1;31;43mfoo\e[m
EOF
)
'
-cat >commit-msg <<'EOF'
+iconv -f utf-8 -t iso8859-1 > commit-msg <<EOF
Test printing of complex bodies
This commit message is much longer than the others,
and it will be encoded in iso8859-1. We should therefore
-include an iso8859 character: ¡bueno!
+include an iso8859 character: ¡bueno!
EOF
+
test_expect_success 'setup complex body' '
-git config i18n.commitencoding iso8859-1 &&
- echo change2 >foo && git commit -a -F commit-msg
+ git config i18n.commitencoding iso8859-1 &&
+ echo change2 >foo && git commit -a -F commit-msg &&
+ head3=$(git rev-parse --verify HEAD) &&
+ head3_short=$(git rev-parse --short $head3)
'
-test_format complex-encoding %e <<'EOF'
-commit 1ed88da4a5b5ed8c449114ac131efc62178734c3
+test_format complex-encoding %e <<EOF
+commit $head3
+iso8859-1
+commit $head2
+iso8859-1
+commit $head1
iso8859-1
-commit 131a310eb913d107dd3c09a65d1651175898735d
-commit 86c75cfd708a0e5868dc876ed5b8bb66c80b4873
EOF
-test_format complex-subject %s <<'EOF'
-commit 1ed88da4a5b5ed8c449114ac131efc62178734c3
+test_format complex-subject %s <<EOF
+commit $head3
Test printing of complex bodies
-commit 131a310eb913d107dd3c09a65d1651175898735d
-changed foo
-commit 86c75cfd708a0e5868dc876ed5b8bb66c80b4873
-added foo
+commit $head2
+$changed_iso88591
+commit $head1
+$added_iso88591
EOF
-test_format complex-body %b <<'EOF'
-commit 1ed88da4a5b5ed8c449114ac131efc62178734c3
-This commit message is much longer than the others,
-and it will be encoded in iso8859-1. We should therefore
-include an iso8859 character: ¡bueno!
+test_expect_success 'prepare expected messages (for test %b)' '
+ cat <<-EOF >expected.utf-8 &&
+ commit $head3
+ This commit message is much longer than the others,
+ and it will be encoded in iso8859-1. We should therefore
+ include an iso8859 character: ¡bueno!
+
+ commit $head2
+ commit $head1
+ EOF
+ iconv -f utf-8 -t iso8859-1 expected.utf-8 >expected.iso8859-1
+'
+
+test_format complex-body %b <expected.iso8859-1
-commit 131a310eb913d107dd3c09a65d1651175898735d
-commit 86c75cfd708a0e5868dc876ed5b8bb66c80b4873
+# Git uses i18n.commitEncoding if no i18n.logOutputEncoding set
+# so unset i18n.commitEncoding to test encoding conversion
+git config --unset i18n.commitEncoding
+
+test_format complex-subject-commitencoding-unset %s <<EOF
+commit $head3
+Test printing of complex bodies
+commit $head2
+$changed
+commit $head1
+$added
EOF
+test_format complex-body-commitencoding-unset %b <expected.utf-8
+
test_expect_success '%x00 shows NUL' '
- echo >expect commit 1ed88da4a5b5ed8c449114ac131efc62178734c3 &&
+ echo >expect commit $head3 &&
echo >>expect fooQbar &&
git rev-list -1 --format=foo%x00bar HEAD >actual.nul &&
nul_to_q <actual.nul >actual &&
test_expect_success 'add SP before non-empty (1)' '
git show -s --pretty=format:"%s% bThanks" HEAD^^ >actual &&
- test $(wc -w <actual) = 2
+ test $(wc -w <actual) = 3
'
test_expect_success 'add SP before non-empty (2)' '
git show -s --pretty=format:"%s% sThanks" HEAD^^ >actual &&
- test $(wc -w <actual) = 4
+ test $(wc -w <actual) = 6
'
test_expect_success '--abbrev' '
# Copyright (c) 2005 Fredrik Kuivinen
#
-# See http://marc.theaimsgroup.com/?l=git&m=111463358500362&w=2 for a
+# See http://marc.info/?l=git&m=111463358500362&w=2 for a
# nice description of what this is about.
check_describe "test2-lightweight-*" --long --tags --match="test2-*" HEAD^
+test_expect_success 'name-rev with exact tags' '
+ echo A >expect &&
+ tag_object=$(git rev-parse refs/tags/A) &&
+ git name-rev --tags --name-only $tag_object >actual &&
+ test_cmp expect actual &&
+
+ echo "A^0" >expect &&
+ tagged_commit=$(git rev-parse "refs/tags/A^0") &&
+ git name-rev --tags --name-only $tagged_commit >actual &&
+ test_cmp expect actual
+'
+
+test_expect_success 'describe --contains with the exact tags' '
+ echo "A^0" >expect &&
+ tag_object=$(git rev-parse refs/tags/A) &&
+ git describe --contains $tag_object >actual &&
+ test_cmp expect actual &&
+
+ echo "A^0" >expect &&
+ tagged_commit=$(git rev-parse "refs/tags/A^0") &&
+ git describe --contains $tagged_commit >actual &&
+ test_cmp expect actual
+'
+
test_done
. ./test-lib.sh
+commit_msg () {
+ # String "modify 2nd file (changed)" partly in German
+ # (translated with Google Translate),
+ # encoded in UTF-8, used as a commit log message below.
+ msg="modify 2nd file (ge\303\244ndert)\n"
+ if test -n "$1"
+ then
+ printf "$msg" | iconv -f utf-8 -t "$1"
+ else
+ printf "$msg"
+ fi
+}
+
test_expect_success 'creating initial files and commits' '
test_tick &&
echo "1st file" >first &&
echo "1st line 2nd file" >secondfile &&
echo "2nd line 2nd file" >>secondfile &&
- git commit -a -m "modify 2nd file" &&
+ git -c "i18n.commitEncoding=iso8859-1" commit -a -m "$(commit_msg iso8859-1)" &&
head5=$(git rev-parse --verify HEAD)
'
# git log --pretty=oneline # to see those SHA1 involved
done | test_cmp .cat_expect -
}
+test_expect_success 'reset --hard message' '
+ hex=$(git log -1 --format="%h") &&
+ git reset --hard > .actual &&
+ echo HEAD is now at $hex $(commit_msg) > .expected &&
+ test_cmp .expected .actual
+'
+
+test_expect_success 'reset --hard message (iso8859-1 logoutputencoding)' '
+ hex=$(git log -1 --format="%h") &&
+ git -c "i18n.logOutputEncoding=iso8859-1" reset --hard > .actual &&
+ echo HEAD is now at $hex $(commit_msg iso8859-1) > .expected &&
+ test_cmp .expected .actual
+'
+
>.diff_expect
>.cached_expect
cat >.cat_expect <<EOF
'changing files and redo the last commit should succeed' '
echo "3rd line 2nd file" >>secondfile &&
git commit -a -C ORIG_HEAD &&
- check_changes 3d3b7be011a58ca0c179ae45d94e6c83c0b0cd0d &&
+ head4=$(git rev-parse --verify HEAD) &&
+ check_changes $head4 &&
test "$(git rev-parse ORIG_HEAD)" = \
$head5
'
git reset --hard HEAD~2 &&
check_changes ddaefe00f1da16864591c61fdc7adb5d7cd6b74e &&
test "$(git rev-parse ORIG_HEAD)" = \
- 3d3b7be011a58ca0c179ae45d94e6c83c0b0cd0d
+ $head4
'
>.diff_expect
echo "1st line 2nd file" >secondfile &&
echo "2nd line 2nd file" >>secondfile &&
- git commit -a -m "modify 2nd file" &&
+ git -c "i18n.commitEncoding=iso8859-1" commit -a -m "$(commit_msg iso8859-1)" &&
check_changes $head5
'
git checkout branch2 &&
echo "3rd line in branch2" >>secondfile &&
git commit -a -m "change in branch2" &&
+ head3=$(git rev-parse --verify HEAD) &&
test_must_fail git pull . branch1 &&
git reset --hard &&
- check_changes 77abb337073fb4369a7ad69ff6f5ec0e4d6b54bb
+ check_changes $head3
'
>.diff_expect
--- /dev/null
+#!/bin/sh
+
+test_description='git clean -i basic tests'
+
+. ./test-lib.sh
+
+test_expect_success 'setup' '
+
+ mkdir -p src &&
+ touch src/part1.c Makefile &&
+ echo build >.gitignore &&
+ echo \*.o >>.gitignore &&
+ git add . &&
+ git commit -m setup &&
+ touch src/part2.c README &&
+ git add .
+
+'
+
+test_expect_success 'git clean -i (c: clean hotkey)' '
+
+ mkdir -p build docs &&
+ touch a.out src/part3.c src/part3.h src/part4.c src/part4.h \
+ docs/manual.txt obj.o build/lib.so &&
+ echo c | git clean -i &&
+ test -f Makefile &&
+ test -f README &&
+ test -f src/part1.c &&
+ test -f src/part2.c &&
+ test ! -f a.out &&
+ test -f docs/manual.txt &&
+ test ! -f src/part3.c &&
+ test ! -f src/part3.h &&
+ test ! -f src/part4.c &&
+ test ! -f src/part4.h &&
+ test -f obj.o &&
+ test -f build/lib.so
+
+'
+
+test_expect_success 'git clean -i (cl: clean prefix)' '
+
+ mkdir -p build docs &&
+ touch a.out src/part3.c src/part3.h src/part4.c src/part4.h \
+ docs/manual.txt obj.o build/lib.so &&
+ echo cl | git clean -i &&
+ test -f Makefile &&
+ test -f README &&
+ test -f src/part1.c &&
+ test -f src/part2.c &&
+ test ! -f a.out &&
+ test -f docs/manual.txt &&
+ test ! -f src/part3.c &&
+ test ! -f src/part3.h &&
+ test ! -f src/part4.c &&
+ test ! -f src/part4.h &&
+ test -f obj.o &&
+ test -f build/lib.so
+
+'
+
+test_expect_success 'git clean -i (quit)' '
+
+ mkdir -p build docs &&
+ touch a.out src/part3.c src/part3.h src/part4.c src/part4.h \
+ docs/manual.txt obj.o build/lib.so &&
+ echo quit | git clean -i &&
+ test -f Makefile &&
+ test -f README &&
+ test -f src/part1.c &&
+ test -f src/part2.c &&
+ test -f a.out &&
+ test -f docs/manual.txt &&
+ test -f src/part3.c &&
+ test -f src/part3.h &&
+ test -f src/part4.c &&
+ test -f src/part4.h &&
+ test -f obj.o &&
+ test -f build/lib.so
+
+'
+
+test_expect_success 'git clean -i (Ctrl+D)' '
+
+ mkdir -p build docs &&
+ touch a.out src/part3.c src/part3.h src/part4.c src/part4.h \
+ docs/manual.txt obj.o build/lib.so &&
+ echo "\04" | git clean -i &&
+ test -f Makefile &&
+ test -f README &&
+ test -f src/part1.c &&
+ test -f src/part2.c &&
+ test -f a.out &&
+ test -f docs/manual.txt &&
+ test -f src/part3.c &&
+ test -f src/part3.h &&
+ test -f src/part4.c &&
+ test -f src/part4.h &&
+ test -f obj.o &&
+ test -f build/lib.so
+
+'
+
+test_expect_success 'git clean -id (filter all)' '
+
+ mkdir -p build docs &&
+ touch a.out src/part3.c src/part3.h src/part4.c src/part4.h \
+ docs/manual.txt obj.o build/lib.so &&
+ (echo f; echo "*"; echo; echo c) | \
+ git clean -id &&
+ test -f Makefile &&
+ test -f README &&
+ test -f src/part1.c &&
+ test -f src/part2.c &&
+ test -f a.out &&
+ test -f docs/manual.txt &&
+ test -f src/part3.c &&
+ test -f src/part3.h &&
+ test -f src/part4.c &&
+ test -f src/part4.h &&
+ test -f obj.o &&
+ test -f build/lib.so
+
+'
+
+test_expect_success 'git clean -id (filter patterns)' '
+
+ mkdir -p build docs &&
+ touch a.out src/part3.c src/part3.h src/part4.c src/part4.h \
+ docs/manual.txt obj.o build/lib.so &&
+ (echo f; echo "part3.* *.out"; echo; echo c) | \
+ git clean -id &&
+ test -f Makefile &&
+ test -f README &&
+ test -f src/part1.c &&
+ test -f src/part2.c &&
+ test -f a.out &&
+ test ! -f docs/manual.txt &&
+ test -f src/part3.c &&
+ test -f src/part3.h &&
+ test ! -f src/part4.c &&
+ test ! -f src/part4.h &&
+ test -f obj.o &&
+ test -f build/lib.so
+
+'
+
+test_expect_success 'git clean -id (filter patterns 2)' '
+
+ mkdir -p build docs &&
+ touch a.out src/part3.c src/part3.h src/part4.c src/part4.h \
+ docs/manual.txt obj.o build/lib.so &&
+ (echo f; echo "* !*.out"; echo; echo c) | \
+ git clean -id &&
+ test -f Makefile &&
+ test -f README &&
+ test -f src/part1.c &&
+ test -f src/part2.c &&
+ test ! -f a.out &&
+ test -f docs/manual.txt &&
+ test -f src/part3.c &&
+ test -f src/part3.h &&
+ test -f src/part4.c &&
+ test -f src/part4.h &&
+ test -f obj.o &&
+ test -f build/lib.so
+
+'
+
+test_expect_success 'git clean -id (select - all)' '
+
+ mkdir -p build docs &&
+ touch a.out src/part3.c src/part3.h src/part4.c src/part4.h \
+ docs/manual.txt obj.o build/lib.so &&
+ (echo s; echo "*"; echo; echo c) | \
+ git clean -id &&
+ test -f Makefile &&
+ test -f README &&
+ test -f src/part1.c &&
+ test -f src/part2.c &&
+ test ! -f a.out &&
+ test ! -f docs/manual.txt &&
+ test ! -f src/part3.c &&
+ test ! -f src/part3.h &&
+ test ! -f src/part4.c &&
+ test ! -f src/part4.h &&
+ test -f obj.o &&
+ test -f build/lib.so
+
+'
+
+test_expect_success 'git clean -id (select - none)' '
+
+ mkdir -p build docs &&
+ touch a.out src/part3.c src/part3.h src/part4.c src/part4.h \
+ docs/manual.txt obj.o build/lib.so &&
+ (echo s; echo; echo c) | \
+ git clean -id &&
+ test -f Makefile &&
+ test -f README &&
+ test -f src/part1.c &&
+ test -f src/part2.c &&
+ test -f a.out &&
+ test -f docs/manual.txt &&
+ test -f src/part3.c &&
+ test -f src/part3.h &&
+ test -f src/part4.c &&
+ test -f src/part4.h &&
+ test -f obj.o &&
+ test -f build/lib.so
+
+'
+
+test_expect_success 'git clean -id (select - number)' '
+
+ mkdir -p build docs &&
+ touch a.out src/part3.c src/part3.h src/part4.c src/part4.h \
+ docs/manual.txt obj.o build/lib.so &&
+ (echo s; echo 3; echo; echo c) | \
+ git clean -id &&
+ test -f Makefile &&
+ test -f README &&
+ test -f src/part1.c &&
+ test -f src/part2.c &&
+ test -f a.out &&
+ test -f docs/manual.txt &&
+ test ! -f src/part3.c &&
+ test -f src/part3.h &&
+ test -f src/part4.c &&
+ test -f src/part4.h &&
+ test -f obj.o &&
+ test -f build/lib.so
+
+'
+
+test_expect_success 'git clean -id (select - number 2)' '
+
+ mkdir -p build docs &&
+ touch a.out src/part3.c src/part3.h src/part4.c src/part4.h \
+ docs/manual.txt obj.o build/lib.so &&
+ (echo s; echo 2 3; echo 5; echo; echo c) | \
+ git clean -id &&
+ test -f Makefile &&
+ test -f README &&
+ test -f src/part1.c &&
+ test -f src/part2.c &&
+ test -f a.out &&
+ test ! -f docs/manual.txt &&
+ test ! -f src/part3.c &&
+ test -f src/part3.h &&
+ test ! -f src/part4.c &&
+ test -f src/part4.h &&
+ test -f obj.o &&
+ test -f build/lib.so
+
+'
+
+test_expect_success 'git clean -id (select - number 3)' '
+
+ mkdir -p build docs &&
+ touch a.out src/part3.c src/part3.h src/part4.c src/part4.h \
+ docs/manual.txt obj.o build/lib.so &&
+ (echo s; echo 3,4 5; echo; echo c) | \
+ git clean -id &&
+ test -f Makefile &&
+ test -f README &&
+ test -f src/part1.c &&
+ test -f src/part2.c &&
+ test -f a.out &&
+ test -f docs/manual.txt &&
+ test ! -f src/part3.c &&
+ test ! -f src/part3.h &&
+ test ! -f src/part4.c &&
+ test -f src/part4.h &&
+ test -f obj.o &&
+ test -f build/lib.so
+
+'
+
+test_expect_success 'git clean -id (select - filenames)' '
+
+ mkdir -p build docs &&
+ touch a.out foo.txt bar.txt baz.txt &&
+ (echo s; echo a.out fo ba bar; echo; echo c) | \
+ git clean -id &&
+ test -f Makefile &&
+ test ! -f a.out &&
+ test ! -f foo.txt &&
+ test ! -f bar.txt &&
+ test -f baz.txt &&
+ rm baz.txt
+
+'
+
+test_expect_success 'git clean -id (select - range)' '
+
+ mkdir -p build docs &&
+ touch a.out src/part3.c src/part3.h src/part4.c src/part4.h \
+ docs/manual.txt obj.o build/lib.so &&
+ (echo s; echo 1,3-4; echo 2; echo; echo c) | \
+ git clean -id &&
+ test -f Makefile &&
+ test -f README &&
+ test -f src/part1.c &&
+ test -f src/part2.c &&
+ test ! -f a.out &&
+ test ! -f src/part3.c &&
+ test ! -f src/part3.h &&
+ test -f src/part4.c &&
+ test -f src/part4.h &&
+ test ! -f docs/manual.txt &&
+ test -f obj.o &&
+ test -f build/lib.so
+
+'
+
+test_expect_success 'git clean -id (select - range 2)' '
+
+ mkdir -p build docs &&
+ touch a.out src/part3.c src/part3.h src/part4.c src/part4.h \
+ docs/manual.txt obj.o build/lib.so &&
+ (echo s; echo 4- 1; echo; echo c) | \
+ git clean -id &&
+ test -f Makefile &&
+ test -f README &&
+ test -f src/part1.c &&
+ test -f src/part2.c &&
+ test ! -f a.out &&
+ test -f docs/manual.txt &&
+ test -f src/part3.c &&
+ test ! -f src/part3.h &&
+ test ! -f src/part4.c &&
+ test ! -f src/part4.h &&
+ test -f obj.o &&
+ test -f build/lib.so
+
+'
+
+test_expect_success 'git clean -id (inverse select)' '
+
+ mkdir -p build docs &&
+ touch a.out src/part3.c src/part3.h src/part4.c src/part4.h \
+ docs/manual.txt obj.o build/lib.so &&
+ (echo s; echo "*"; echo -5- 1 -2; echo; echo c) | \
+ git clean -id &&
+ test -f Makefile &&
+ test -f README &&
+ test -f src/part1.c &&
+ test -f src/part2.c &&
+ test ! -f a.out &&
+ test -f docs/manual.txt &&
+ test ! -f src/part3.c &&
+ test ! -f src/part3.h &&
+ test -f src/part4.c &&
+ test -f src/part4.h &&
+ test -f obj.o &&
+ test -f build/lib.so
+
+'
+
+test_expect_success 'git clean -id (ask)' '
+
+ mkdir -p build docs &&
+ touch a.out src/part3.c src/part3.h src/part4.c src/part4.h \
+ docs/manual.txt obj.o build/lib.so &&
+ (echo a; echo Y; echo y; echo no; echo yes; echo bad; echo) | \
+ git clean -id &&
+ test -f Makefile &&
+ test -f README &&
+ test -f src/part1.c &&
+ test -f src/part2.c &&
+ test ! -f a.out &&
+ test ! -f docs/manual.txt &&
+ test -f src/part3.c &&
+ test ! -f src/part3.h &&
+ test -f src/part4.c &&
+ test -f src/part4.h &&
+ test -f obj.o &&
+ test -f build/lib.so
+
+'
+
+test_expect_success 'git clean -id (ask - Ctrl+D)' '
+
+ mkdir -p build docs &&
+ touch a.out src/part3.c src/part3.h src/part4.c src/part4.h \
+ docs/manual.txt obj.o build/lib.so &&
+ (echo a; echo Y; echo no; echo yes; echo "\04") | \
+ git clean -id &&
+ test -f Makefile &&
+ test -f README &&
+ test -f src/part1.c &&
+ test -f src/part2.c &&
+ test ! -f a.out &&
+ test -f docs/manual.txt &&
+ test ! -f src/part3.c &&
+ test -f src/part3.h &&
+ test -f src/part4.c &&
+ test -f src/part4.h &&
+ test -f obj.o &&
+ test -f build/lib.so
+
+'
+
+test_expect_success 'git clean -id with prefix and path (filter)' '
+
+ mkdir -p build docs &&
+ touch a.out src/part3.c src/part3.h src/part4.c src/part4.h \
+ docs/manual.txt obj.o build/lib.so &&
+ (cd build/ && \
+ (echo f; echo "docs"; echo "*.h"; echo ; echo c) | \
+ git clean -id ..) &&
+ test -f Makefile &&
+ test -f README &&
+ test -f src/part1.c &&
+ test -f src/part2.c &&
+ test ! -f a.out &&
+ test -f docs/manual.txt &&
+ test ! -f src/part3.c &&
+ test -f src/part3.h &&
+ test ! -f src/part4.c &&
+ test -f src/part4.h &&
+ test -f obj.o &&
+ test -f build/lib.so
+
+'
+
+test_expect_success 'git clean -id with prefix and path (select by name)' '
+
+ mkdir -p build docs &&
+ touch a.out src/part3.c src/part3.h src/part4.c src/part4.h \
+ docs/manual.txt obj.o build/lib.so &&
+ (cd build/ && \
+ (echo s; echo "../docs/"; echo "../src/part3.c"; \
+ echo "../src/part4.c"; echo; echo c) | \
+ git clean -id ..) &&
+ test -f Makefile &&
+ test -f README &&
+ test -f src/part1.c &&
+ test -f src/part2.c &&
+ test -f a.out &&
+ test ! -f docs/manual.txt &&
+ test ! -f src/part3.c &&
+ test -f src/part3.h &&
+ test ! -f src/part4.c &&
+ test -f src/part4.h &&
+ test -f obj.o &&
+ test -f build/lib.so
+
+'
+
+test_expect_success 'git clean -id with prefix and path (ask)' '
+
+ mkdir -p build docs &&
+ touch a.out src/part3.c src/part3.h src/part4.c src/part4.h \
+ docs/manual.txt obj.o build/lib.so &&
+ (cd build/ && \
+ (echo a; echo Y; echo y; echo no; echo yes; echo bad; echo) | \
+ git clean -id ..) &&
+ test -f Makefile &&
+ test -f README &&
+ test -f src/part1.c &&
+ test -f src/part2.c &&
+ test ! -f a.out &&
+ test ! -f docs/manual.txt &&
+ test -f src/part3.c &&
+ test ! -f src/part3.h &&
+ test -f src/part4.c &&
+ test -f src/part4.h &&
+ test -f obj.o &&
+ test -f build/lib.so
+
+'
+
+test_done
git submodule >&2 &&
test -n "$(git submodule | grep "$svname")"
'
+
+test_expect_success 'submodule add clone shallow submodule' '
+ mkdir super &&
+ pwd=$(pwd)
+ (
+ cd super &&
+ git init &&
+ git submodule add --depth=1 file://"$pwd"/example2 submodule &&
+ (
+ cd submodule &&
+ test 1 = $(git log --oneline | wc -l)
+ )
+ )
+'
+
+
test_done
)
'
+test_expect_success 'submodule update - command in .git/config' '
+ (cd super &&
+ git config submodule.submodule.update "!git checkout"
+ ) &&
+ (cd super/submodule &&
+ git reset --hard HEAD^
+ ) &&
+ (cd super &&
+ (cd submodule &&
+ compare_head
+ ) &&
+ git submodule update submodule &&
+ cd submodule &&
+ ! compare_head
+ )
+'
+
+test_expect_success 'submodule update - command in .git/config catches failure' '
+ (cd super &&
+ git config submodule.submodule.update "!false"
+ ) &&
+ (cd super/submodule &&
+ git reset --hard HEAD^
+ ) &&
+ (cd super &&
+ test_must_fail git submodule update submodule
+ )
+'
+
test_expect_success 'submodule init picks up rebase' '
(cd super &&
git config -f .gitmodules submodule.rebasing.update rebase &&
test_expect_success SYMLINKS 'submodule update can handle symbolic links in pwd' '
mkdir -p linked/dir &&
ln -s linked/dir linkto &&
- (
- cd linkto &&
- git clone "$TRASH_DIRECTORY"/super_update_r2 super &&
- (
- cd super &&
- git submodule update --init --recursive
- )
+ (cd linkto &&
+ git clone "$TRASH_DIRECTORY"/super_update_r2 super &&
+ (cd super &&
+ git submodule update --init --recursive
+ )
)
'
+test_expect_success 'submodule update clone shallow submodule' '
+ git clone cloned super3 &&
+ pwd=$(pwd)
+ (cd super3 &&
+ sed -e "s#url = ../#url = file://$pwd/#" <.gitmodules >.gitmodules.tmp &&
+ mv -f .gitmodules.tmp .gitmodules &&
+ git submodule update --init --depth=3
+ (cd submodule &&
+ test 1 = $(git log --oneline | wc -l)
+ )
+ )
+'
test_done
test_must_fail git merge --no-ff --squash c1
'
-test_expect_success 'combining --ff-only and --no-ff is refused' '
- test_must_fail git merge --ff-only --no-ff c1 &&
- test_must_fail git merge --no-ff --ff-only c1
+test_expect_success 'option --ff-only overwrites --no-ff' '
+ git merge --no-ff --ff-only c1 &&
+ test_must_fail git merge --no-ff --ff-only c2
+'
+
+test_expect_success 'option --no-ff overrides merge.ff=only config' '
+ git reset --hard c0 &&
+ test_config merge.ff only &&
+ git merge --no-ff c1
'
test_expect_success 'merge c0 with c1 (ff overrides no-ff)' '
'
# First do the merge with resolve and recursive then verify that
-# recusive is chosen.
+# recursive is chosen.
test_expect_success 'merge picks up the best result' '
git config --unset-all pull.twohead &&
PROG='git annotate'
. "$TEST_DIRECTORY"/annotate-tests.sh
-test_expect_success 'Annotating an old revision works' '
- git annotate file master >result &&
- awk "{ print \$3; }" <result >authors &&
+test_expect_success 'annotate old revision' '
+ git annotate file master >actual &&
+ awk "{ print \$3; }" <actual >authors &&
test 2 = $(grep A <authors | wc -l) &&
test 2 = $(grep B <authors | wc -l)
'
. "$TEST_DIRECTORY"/annotate-tests.sh
PROG='git blame -c -e'
-test_expect_success 'Blame --show-email works' '
- check_count "<A@test.git>" 1 "<B@test.git>" 1 "<B1@test.git>" 1 "<B2@test.git>" 1 "<author@example.com>" 1 "<C@test.git>" 1 "<D@test.git>" 1 "<E at test dot git>" 1
+test_expect_success 'blame --show-email' '
+ check_count \
+ "<A@test.git>" 1 \
+ "<B@test.git>" 1 \
+ "<B1@test.git>" 1 \
+ "<B2@test.git>" 1 \
+ "<author@example.com>" 1 \
+ "<C@test.git>" 1 \
+ "<D@test.git>" 1 \
+ "<E at test dot git>" 1
'
test_done
rm -fr .git &&
git init &&
#git remote add svnsim testsvn::sim:///$TEST_DIRECTORY/t9020/example.svnrdump
- # let's reuse an exisiting dump file!?
+ # let's reuse an existing dump file!?
git remote add svnsim testsvn::sim://$TEST_DIRECTORY/t9154/svn.dump
git remote add svnfile testsvn::file://$TEST_DIRECTORY/t9154/svn.dump
}
# Loading a node from a svn dumpfile without a Text-Content-Length
# field causes svn to neglect to store or report an md5sum. (it will
# calculate one if you had put Text-Content-Length: 0). This showed
-# up in a repository creted with cvs2svn.
+# up in a repository created with cvs2svn.
cat > dumpfile.svn <<EOF
SVN-fs-dump-format-version: 1
View: //depot/usecs/b1/... //depot/usecs/b3/...
EOF
- echo b3/b3-file3 >b3/b3-file3 &&
- p4 add b3/b3-file3 &&
- p4 submit -d "b3/b3-file3"
+ echo b3/b3-file3_1 >b3/b3-file3_1 &&
+ echo b3/b3-file3_2 >b3/b3-file3_2 &&
+ p4 add b3/b3-file3_1 &&
+ p4 add b3/b3-file3_2 &&
+ p4 submit -d "b3/b3-file3_1 b3/b3-file3_2"
)
'
)
'
+test_expect_success 'use-client-spec detect-branches skips files in branches' '
+ client_view "//depot/usecs/... //client/..." \
+ "-//depot/usecs/b3/b3-file3_1 //client/b3/b3-file3_1" &&
+ test_when_finished cleanup_git &&
+ test_create_repo "$git" &&
+ (
+ cd "$git" &&
+ git p4 sync --detect-branches --use-client-spec //depot/usecs@all &&
+ git checkout -b master p4/usecs/b3 &&
+ test_path_is_file b1-file1 &&
+ test_path_is_file b3-file3_2 &&
+ test_path_is_missing b3-file3_1
+ )
+'
+
test_expect_success 'kill p4d' '
kill_p4d
'
test_cmp f-unix-orig f-unix &&
# make sure stored in repo as unix newlines
- # use sed to eat python-appened newline
+ # use sed to eat python-appended newline
p4 -G print //depot/f-unix | marshal_dump data 2 |\
sed \$d >f-unix-p4-print &&
test_cmp f-unix-orig f-unix-p4-print &&
local -a COMPREPLY _words
local _cword
_words=( $1 )
- test "${1: -1}" == ' ' && _words+=('')
+ test "${1: -1}" = ' ' && _words+=('')
(( _cword = ${#_words[@]} - 1 ))
__git_wrap__git_main && print_comp
}
print join("\n", @vars);
')
unset XDG_CONFIG_HOME
+unset GITPERLLIB
GIT_AUTHOR_EMAIL=author@example.com
GIT_AUTHOR_NAME='A U Thor'
GIT_COMMITTER_EMAIL=committer@example.com
test_set_prereq MINGW
test_set_prereq NOT_CYGWIN
test_set_prereq SED_STRIPS_CR
+ test_set_prereq GREP_STRIPS_CR
;;
*CYGWIN*)
test_set_prereq POSIXPERM
test_set_prereq NOT_MINGW
test_set_prereq CYGWIN
test_set_prereq SED_STRIPS_CR
+ test_set_prereq GREP_STRIPS_CR
;;
*)
test_set_prereq POSIXPERM
test_lazy_prereq PIPE '
# test whether the filesystem supports FIFOs
- rm -f testfifo && mkfifo testfifo
+ case $(uname -s) in
+ CYGWIN*)
+ false
+ ;;
+ *)
+ rm -f testfifo && mkfifo testfifo
+ ;;
+ esac
'
test_lazy_prereq SYMLINKS '
against=4b825dc642cb6eb9a060e54bf8d69288fbee4904
fi
-# If you want to allow non-ascii filenames set this variable to true.
+# If you want to allow non-ASCII filenames set this variable to true.
allownonascii=$(git config hooks.allownonascii)
# Redirect output to stderr.
exec 1>&2
-# Cross platform projects tend to avoid non-ascii filenames; prevent
+# Cross platform projects tend to avoid non-ASCII filenames; prevent
# them from being added to the repository. We exploit the fact that the
# printable range starts at the space character and ends with tilde.
if [ "$allownonascii" != "true" ] &&
test $(git diff --cached --name-only --diff-filter=A -z $against |
LC_ALL=C tr -d '[ -~]\0' | wc -c) != 0
then
- echo "Error: Attempt to add a non-ascii file name."
- echo
- echo "This can cause problems if you want to work"
- echo "with people on other platforms."
- echo
- echo "To be portable it is advisable to rename the file ..."
- echo
- echo "If you know what you are doing you can disable this"
- echo "check using:"
- echo
- echo " git config hooks.allownonascii true"
- echo
+ cat <<\EOF
+Error: Attempt to add a non-ASCII file name.
+
+This can cause problems if you want to work with people on other platforms.
+
+To be portable it is advisable to rename the file.
+
+If you know what you are doing you can disable this check using:
+
+ git config hooks.allownonascii true
+EOF
exit 1
fi
struct cache_tree *another = cache_tree();
if (read_cache() < 0)
die("unable to read index file");
- cache_tree_update(another, active_cache, active_nr, WRITE_TREE_DRY_RUN);
+ cache_tree_update(another,
+ (const struct cache_entry * const *)active_cache,
+ active_nr, WRITE_TREE_DRY_RUN);
return dump_cache_tree(active_cache_tree, another, "");
}
return 1;
}
+static void normalize_argv_string(const char **var, const char *input)
+{
+ if (!strcmp(input, "<null>"))
+ *var = NULL;
+ else if (!strcmp(input, "<empty>"))
+ *var = "";
+ else
+ *var = input;
+
+ if (*var && (**var == '<' || **var == '('))
+ die("Bad value: %s\n", input);
+}
+
int main(int argc, char **argv)
{
if (argc == 3 && !strcmp(argv[1], "normalize_path_copy")) {
return 0;
}
+ if (argc == 3 && !strcmp(argv[1], "mingw_path")) {
+ puts(argv[2]);
+ return 0;
+ }
+
+ if (argc == 4 && !strcmp(argv[1], "relative_path")) {
+ struct strbuf sb = STRBUF_INIT;
+ const char *in, *prefix, *rel;
+ normalize_argv_string(&in, argv[2]);
+ normalize_argv_string(&prefix, argv[3]);
+ rel = relative_path(in, prefix, &sb);
+ if (!rel)
+ puts("(null)");
+ else
+ puts(strlen(rel) > 0 ? rel : "(empty)");
+ strbuf_release(&sb);
+ return 0;
+ }
+
fprintf(stderr, "%s: unknown function name: %s\n", argv[0],
argv[1] ? argv[1] : "(there was none)");
return 1;
strbuf_release(&buf);
}
+__attribute__((format (printf, 2, 3)))
static void trace_printf_key(const char *key, const char *fmt, ...)
{
va_list ap;
#define PBUFFERSIZE 8192
/* Print bidirectional transfer loop debug message. */
+__attribute__((format (printf, 1, 2)))
static void transfer_debug(const char *fmt, ...)
{
va_list args;
return -1;
} else if (bytes == 0) {
transfer_debug("%s EOF (with %i bytes in buffer)",
- t->src_name, t->bufuse);
+ t->src_name, (int)t->bufuse);
t->state = SSTATE_FLUSHING;
} else if (bytes > 0) {
t->bufuse += bytes;
#ifndef NO_PTHREADS
/*
- * Join thread, with apporiate errors on failure. Name is name for the
+ * Join thread, with appropriate errors on failure. Name is name for the
* thread (for error messages). Returns 0 on success, 1 on failure.
*/
static int tloop_join(pthread_t thread, const char *name)
}
/*
- * Join process, with apporiate errors on failure. Name is name for the
+ * Join process, with appropriate errors on failure. Name is name for the
* process (for error messages). Returns 0 on success, 1 on failure.
*/
static int tloop_join(pid_t pid, const char *name)
int traverse_trees(int n, struct tree_desc *t, struct traverse_info *info)
{
- int ret = 0;
int error = 0;
struct name_entry *entry = xmalloc(n*sizeof(*entry));
int i;
strbuf_setlen(&base, info->pathlen);
}
for (;;) {
+ int trees_used;
unsigned long mask, dirmask;
const char *first = NULL;
int first_len = 0;
if (interesting < 0)
break;
if (interesting) {
- ret = info->fn(n, mask, dirmask, entry, info);
- if (ret < 0) {
- error = ret;
+ trees_used = info->fn(n, mask, dirmask, entry, info);
+ if (trees_used < 0) {
+ error = trees_used;
if (!info->show_all_errors)
break;
}
- mask &= ret;
+ mask &= trees_used;
}
- ret = 0;
for (i = 0; i < n; i++)
if (mask & (1ul << i))
update_extended_entry(tx + i, entry + i);
* sort at the end.
*/
for (i = 0; !fn && i < active_nr; i++) {
- struct cache_entry *ce = active_cache[i];
+ const struct cache_entry *ce = active_cache[i];
if (ce_stage(ce) == stage)
fn = read_one_entry;
}
* Unlink the last component and schedule the leading directories for
* removal, such that empty directories get removed.
*/
-static void unlink_entry(struct cache_entry *ce)
+static void unlink_entry(const struct cache_entry *ce)
{
if (!check_leading_path(ce->name, ce_namelen(ce)))
return;
if (o->update && o->verbose_update) {
for (total = cnt = 0; cnt < index->cache_nr; cnt++) {
- struct cache_entry *ce = index->cache[cnt];
+ const struct cache_entry *ce = index->cache[cnt];
if (ce->ce_flags & (CE_UPDATE | CE_WT_REMOVE))
total++;
}
if (o->update)
git_attr_set_direction(GIT_ATTR_CHECKOUT, &o->result);
for (i = 0; i < index->cache_nr; i++) {
- struct cache_entry *ce = index->cache[i];
+ const struct cache_entry *ce = index->cache[i];
if (ce->ce_flags & CE_WT_REMOVE) {
display_progress(progress, ++cnt);
return NULL;
}
-static void add_same_unmerged(struct cache_entry *ce,
+static void add_same_unmerged(const struct cache_entry *ce,
struct unpack_trees_options *o)
{
struct index_state *index = o->src_index;
int p_len = tree_entry_len(p);
for (pos = o->cache_bottom; pos < index->cache_nr; pos++) {
- struct cache_entry *ce = index->cache[pos];
+ const struct cache_entry *ce = index->cache[pos];
const char *ce_name, *ce_slash;
int cmp, ce_len;
*/
static int icase_exists(struct unpack_trees_options *o, const char *name, int len, struct stat *st)
{
- struct cache_entry *src;
+ const struct cache_entry *src;
src = index_name_exists(o->src_index, name, len, 1);
return src && !ie_match_stat(o->src_index, src, st, CE_MATCH_IGNORE_VALID|CE_MATCH_IGNORE_SKIP_WORKTREE);
enum unpack_trees_error_types error_type,
struct unpack_trees_options *o)
{
- struct cache_entry *result;
+ const struct cache_entry *result;
/*
* It may be that the 'lstat()' succeeded even though
int is_utf8(const char *text);
int is_encoding_utf8(const char *name);
int same_encoding(const char *, const char *);
+__attribute__((format (printf, 2, 3)))
int utf8_fprintf(FILE *, const char *, ...);
void strbuf_add_wrapped_text(struct strbuf *buf,
GIT_TEMPLATE_DIR='@@BUILD_DIR@@/templates/blt'
export GIT_TEMPLATE_DIR
fi
-GITPERLLIB='@@BUILD_DIR@@/perl/blib/lib'
+GITPERLLIB='@@BUILD_DIR@@/perl/blib/lib'"${GITPERLLIB:+:$GITPERLLIB}"
GIT_TEXTDOMAINDIR='@@BUILD_DIR@@/po/build/locale'
PATH='@@BUILD_DIR@@/bin-wrappers:'"$PATH"
export GIT_EXEC_PATH GITPERLLIB PATH GIT_TEXTDOMAINDIR
template[5] = letters[v % num_letters]; v /= num_letters;
fd = open(pattern, O_CREAT | O_EXCL | O_RDWR, mode);
- if (fd > 0)
+ if (fd >= 0)
return fd;
/*
* Fatal error (EPERM, ENOSPC etc).
struct strbuf onebuf = STRBUF_INIT;
const char *one, *how = _("bug");
- one = quote_path(it->string, -1, &onebuf, s->prefix);
+ one = quote_path(it->string, s->prefix, &onebuf);
status_printf(s, color(WT_STATUS_HEADER, s), "\t");
switch (d->stagemask) {
case 1: how = _("both deleted:"); break;
change_type);
}
- one = quote_path(one_name, -1, &onebuf, s->prefix);
- two = quote_path(two_name, -1, &twobuf, s->prefix);
+ one = quote_path(one_name, s->prefix, &onebuf);
+ two = quote_path(two_name, s->prefix, &twobuf);
status_printf(s, color(WT_STATUS_HEADER, s), "\t");
switch (status) {
static int unmerged_mask(const char *path)
{
int pos, mask;
- struct cache_entry *ce;
+ const struct cache_entry *ce;
pos = cache_name_pos(path, strlen(path));
if (0 <= pos)
for (i = 0; i < active_nr; i++) {
struct string_list_item *it;
struct wt_status_change_data *d;
- struct cache_entry *ce = active_cache[i];
+ const struct cache_entry *ce = active_cache[i];
if (!ce_path_match(ce, &pathspec))
continue;
struct string_list_item *it;
const char *path;
it = &(l->items[i]);
- path = quote_path(it->string, strlen(it->string),
- &buf, s->prefix);
+ path = quote_path(it->string, s->prefix, &buf);
if (column_active(s->colopts)) {
string_list_append(&output, path);
continue;
} else {
struct strbuf onebuf = STRBUF_INIT;
const char *one;
- one = quote_path(it->string, -1, &onebuf, s->prefix);
+ one = quote_path(it->string, s->prefix, &onebuf);
printf(" %s\n", one);
strbuf_release(&onebuf);
}
struct strbuf onebuf = STRBUF_INIT;
const char *one;
if (d->head_path) {
- one = quote_path(d->head_path, -1, &onebuf, s->prefix);
+ one = quote_path(d->head_path, s->prefix, &onebuf);
if (*one != '"' && strchr(one, ' ') != NULL) {
putchar('"');
strbuf_addch(&onebuf, '"');
printf("%s -> ", one);
strbuf_release(&onebuf);
}
- one = quote_path(it->string, -1, &onebuf, s->prefix);
+ one = quote_path(it->string, s->prefix, &onebuf);
if (*one != '"' && strchr(one, ' ') != NULL) {
putchar('"');
strbuf_addch(&onebuf, '"');
} else {
struct strbuf onebuf = STRBUF_INIT;
const char *one;
- one = quote_path(it->string, -1, &onebuf, s->prefix);
+ one = quote_path(it->string, s->prefix, &onebuf);
color_fprintf(s->fp, color(WT_STATUS_UNTRACKED, s), "%s", sign);
printf(" %s\n", one);
strbuf_release(&onebuf);
void wt_shortstatus_print(struct wt_status *s);
void wt_porcelain_print(struct wt_status *s);
-void status_printf_ln(struct wt_status *s, const char *color, const char *fmt, ...)
- ;
-void status_printf(struct wt_status *s, const char *color, const char *fmt, ...)
- ;
+__attribute__((format (printf, 3, 4)))
+void status_printf_ln(struct wt_status *s, const char *color, const char *fmt, ...);
+__attribute__((format (printf, 3, 4)))
+void status_printf(struct wt_status *s, const char *color, const char *fmt, ...);
#endif /* STATUS_H */